Process engineer jobs in San Jose, CA

The Senior Manufacturing / Process Engineer is responsible for developing, implementing, and improving manufacturing processes for electronic assemblies in a high-mix, low-volume environment. This role supports both the U.S. and Vietnam facilities, ensuring process repeatability, cost efficiency, and product quality across SMT, Through-Hole, and system assembly operations. The senior manufacturing process engineer will report directly to the VP of operations. Goals: Build products and provide services with the highest Flexibility, Productivity, and Quality. Achieve total customer satisfaction through technical excellence and responsive engineering support. Ensure successful NPI launches through cross-functional collaboration, process validation, and data-driven feedback to design and quality teams. Objectives: 1. Support production operations in the following categories: a. Reduce downtime caused by engineering issues (programming, MPI errors, tooling, design, or line stoppage). b. Improve quality yield through root cause analysis, corrective actions, and robust process setup. c. Lead NPI and prototype builds, ensuring process readiness, documentation completeness, and manufacturability validation prior to production release. 2. Provide engineering services to meet customer needs and expectations in the following areas: a. Design for Manufacturability (DFM). b. Manufacturing Process Instruction (MPI) creation and maintenance. c. Engineering Change Order (ECO) implementation. d. Defect Reduction Team (DRT) meetings and follow-up actions. e. Failure analysis and corrective action documentation. f. Develop and validate new or modified processes, including process capability studies, DOE validation, and reflow/wave solder profile optimization g. Other engineering requests as required by customers or management. Job Description: SMT / Through-Hole / 2nd Ops / 3rd Ops Process Support Review daily SMT or build schedule to ensure process readiness. Confirm all required items are complete and available prior to production: Job package with full build documentation. Manufacturing Process Instruction (MPI) reviewed and approved. Routing definitions for data collection. Validated reflow or wave solder profiles. ECOs, deviations, or special instructions incorporated into the MPI and/or job package. All required tooling available and verified. Review pre-build DFM, document known defects, and hyperlink details in the MPI. Lead cross-functional NPI kickoff meetings to review design requirements, risk areas, and special process considerations. Document and track NPI issues and lessons learned for future builds. Coordinate with Program Managers to resolve DFM showstoppers prior to build. Analyze previous quality data, identify recurring defects, determine root causes, and implement corrective actions. Design, order, and verify all required tooling (stencils, wave solder pallets, press-fit fixtures, conformal coat fixtures, etc.). Maintain tooling logs, labeling, and readiness tracking within Omega Build Readiness. Inspect and sign off first article setups for critical processes (stencil printer, reflow oven, wave solder, etc.) using the First Article Checklist. Inspect initial boards after print and reflow for solder release, bridging, voids, and process anomalies. Document findings and sign off the First Article Report. Provide on-the-floor training for operators and technicians regarding new processes, corrective actions, or observed deficiencies. Support production by promptly responding to technical inquiries or line support issues. Exercise full authority to stop the line if repeated defects or safety concerns are observed. Quality Data Review & Root Cause Analysis Review production data in Omega Data Collection, identifying root causes and corrective actions. Review Daily, Weekly, and Customer Quality Reports to identify trends, recurring issues, or process gaps. Provide structured analysis and report findings to Quality and Production (using 8D or equivalent methodology). Document corrective actions and verify implementation during the next production run. Present findings and improvement updates in internal and customer quality meetings. Other Responsibilities: Create and submit Post-Build DFM reports to Program Managers with improvement recommendations. Implement and validate ECO changes per revision control procedures. Perform and document detailed failure analyses for internal and customer returns. Participate in process improvement projects and defect-reduction initiatives. Provide customer-driven engineering services or special support requests. Develop and deliver internal technical training for operators and peers. Support ISO 9001 and AS9100 activities, including audits, documentation, and Work Instruction updates. Qualifications: Bachelor's degree in Manufacturing, Industrial, or Mechanical Engineering (or related discipline). 8-12 years of hands-on experience in electronics manufacturing (PCBA, box-build, system integration). Deep understanding of SMT, Through-Hole, and system assembly processes. Proficient in process validation, FAI, SPC, DOE, and yield improvement. Familiarity with FactoryLogix and related MES/ERP systems. Experience leading NPI builds and developing new assembly processes from prototype through production release. Familiarity with DFM/DFT analysis tools and PCB CAD systems (e.g., Altium, Valor, Mentor). Experience with Lean, Six Sigma, and structured problem-solving tools. Strong communication and analytical skills with the ability to multitask in a fast-paced environment. U.S. Citizen or Permanent Resident (ITAR requirement). Compensation: $120-$150K Annually Benefits: Medical Dental Vision 401K + Roth 401K Vacation Paid Holidays

Principal Applications Engineer (Mass Spectrometry) 🟢 Experience 5 to 12 years 📍 Milpitas, California, USA 🟢 Full-time | Onsite Role 🟢 U.S. Citizens & Green Card Holders Only 🚀 We are hiring a Principal Applications Engineer - Mass Spectrometry This role is ideal for engineers who thrive in analytical instrumentation, customer engagement, and semiconductor or high-tech environments. ✅ About the Role We are seeking an experienced Principal Applications Engineer with a strong background in mass spectrometry and gas analyzers to support customers, solve technical challenges, and provide high-level applications expertise. This position requires a hands-on professional with excellent communication skills, strong technical depth, and the ability to work directly with customers to resolve instrumentation-related queries. ✅ Key Responsibilities Experience in analytical instrumentation, including mass spectrometers and gas analyzers Ability to engage with customers, handle inquiries, troubleshoot issues, and provide application-level support Familiarity with semiconductor manufacturing processes Self-motivated and proactive in customer interaction and problem-solving Willingness to travel for customer visits, installations, or support needs ✅ Education 🎓 Bachelor's degree in Engineering (Electronics / Electrical background highly preferred) ✅ Requirements ✅ U.S. Citizen or Green Card Holder ✅ Strong experience in mass spectrometry / gas analysis instrumentation ✅ Customer-facing experience ✅ Semiconductor process knowledge ✅ Ability to travel for onsite support If you have the passion to work with advanced instrumentation, support high-tech customers, and be part of a fast-moving engineering environment, we'd love to connect with you. 📩 Apply or share your resume at: **************** keywords: Experience with mass spectrometry, analytical instrumentation, LC-MS, GC-MS, gas analyzers, scientific instruments, spectroscopy, vacuum systems, ion source technologies, high-precision measurement tools, semiconductor process equipment, wafer fabrication instrumentation, contamination monitoring systems, process control instrumentation, plasma and deposition tools, metrology systems, life sciences instrumentation, molecular diagnostics platforms, DNA sequencing technologies, biomedical instrumentation, lab automation systems, electronics engineering, sensor-based devices, hardware troubleshooting, calibration, system integration, customer-facing technical support, field applications engineering, instrumentation engineering, applications specialist roles, and advanced manufacturing instrumentation Best Regards Mohammed Javed Shaikh EMC- Executive Management Consultant Contact No: US- *************** | India - +91 92233 08247 Email ID - ****************

Job No. ROCGJP00038410 Client: Genentech Contract Duration : 1 Year Rate: $35 - $40/hr. This position supports the establishment of a world-class packaging organization by providing technical expertise in the development and deployment of new packaging systems for pharmaceutical products and combination products. The selected candidate will work on a variety of packaging initiatives and will support Global Packaging Development in establishing packaging systems for clinical and commercial use. Job Responsibilities Develop and qualify global primary and secondary packaging solutions for sterile, non-sterile and combination products, incl. author/co-author the related packaging specifications and qualification documentation Qualification of global packaging solutions in line with the current validation requirements (e.g. Development of test protocols and reports, risk assessment, execute IQ/OQ/PQ, and shipping qualification) Maintenance of global packaging solutions (e.g. support change control records, provide impact assessments, execute requalification) Evaluate and develop new materials and/or alternate packaging materials, packaging solutions or packaging systems based on product, regulatory, business or technical requirements Support or lead projects delivering innovative packaging technologies and systems under Roche global packaging technology centers Qualifications Education & Qualifications: Personal Requirements: Bachelor degree, preferably with an engineering degree in packaging, materials science, or a related field At least 1 year working experience in relevant field Proficient technical leadership, collaboration and communication skills English language proficiency required Technical Requirements: Knowledge of packaging testing methodologies and standards including, shock, drop and vibration testing, peel force and tensile testing, barrier analysis, CCI/Sterile integrity, DIN, ISO, ISTA, USP, FDA, MHRA and ASTM standards for packaging design and validation Knowledge of packaging process equipment, related to steriles, and non-steriles, and combination products packaging activities (e.g. vials, PFS, devices, aseptic form/fill/seal, blister and bottle filling lines), printing systems and serialization Knowledge on equipment IQ, OQ, and PQ and development of qualification protocols / reports for packaging and shipping qualification activities Knowledge of design control for combination products Working knowledge of computer systems including TOPS, CAD or Solidworks, and Microsoft tools including MS project, and Adobe Knowledge of industry best practices and technical writing skills such as GMP and GDP

Job Title: Manufacturing Engineer Compensation: $100,000 -$125,000 Full employer-covered medical, dental, vision, and life insurance for employee, 401(k) ** VISA SPONSORSHIP AND RELOCATION ASSISTANCE ARE NOT AVAILABLE FOR THIS ROLE ** EXPERIENCE WITH SEMICONDUCTOR MANUFACTURING PROCESSES IS A MAJOR PLUS! What You Will Be Doing: Develop and maintain detailed manufacturing process documentation including Operation Method Sheets, test procedures, test protocols, and quality checklists for electromechanical assemblies. Design custom fixtures, shop drawings and production tools to enhance efficiency, accuracy, and repeatability in manufacturing workflows. Translate engineering designs into clear instructions and shop drawings for production teams. Lead engineering build efforts and support assembly of complex control systems and modules. Partner with teams across Sales, Quality, and Production to refine manufacturing methods and improve outcomes. Identify and resolve production and quality issues through hands-on troubleshooting and structured problem-solving. Contribute to customer projects, ensuring deadlines and quality standards are consistently met. What You Bring: A bachelor's degree in Mechanical Engineering, preferably with experience in high-tech or semiconductor manufacturing. 5-8 years of hands-on experience in machining or fabrication, particularly with metals and plastics. Strong proficiency in SolidWorks and extensive knowledge of Geometric Dimensioning and Tolerancing (GD&T). A practical, problem-solving mindset with a strong mechanical aptitude and a data-informed approach. Clear and confident communication skills, with the ability to present ideas and results to both internal stakeholders and external customers. Working knowledge of manufacturing software, Excel, and standard business analysis tools. Ability to work independently, stay organized, and contribute in a fast-paced, cross-functional team environment.

• Study time, motion, methods, and speed involved in maintenance, production, and other operations to establish standard production rate and improve efficiency. • Interpret engineering drawings, schematic diagrams, or formulas and confer with management or engineering staff to determine quality and reliability standards. • Read worker logs, product processing sheets, and specification sheets, to verify that records adhere to quality assurance specifications. • Aid in planning work assignments in accordance with worker performance, machine capacity, production schedules, and anticipated delays. • Prepare charts, graphs, and diagrams to illustrate workflow, routing, floor layouts, material handling, and machine utilization. Required Skills: • Creativity, verbal and written communication skills, analytical and problem-solving ability. • Team player and detail oriented. • Ability to make sketches, engineering drawings and common computations. • Ability to read and interpret blueprints, technical drawing, schematics and computer-generated reports. • Previous experience with computer applications and software related to engineering field, such as Computer Aided Design (CAD). Education/Experience: • Bachelor's degree in engineering required. • 5-7 years of experience required. Pay for this position is based on market location and may vary depending on job-related knowledge, skills, and experience. As a contractor you may also be eligible for health benefits such as health, dental, and vision as well as access to a 401K plan. Applicants should apply via The Mice Groups Inc. website (******************* or through this careers site posting. We are an equal opportunity employer and value diversity at The Mice Groups Inc. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. Pursuant to the San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. Pursuant to the Los Angeles Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. The Mice Groups Inc. values your privacy. Please consult our Candidate Privacy Notice, for information about how we collect, use, and disclose personal information of our candidates. Privacy Policy One of the basic principles The Mice Groups follows in designing and operating this website is that we ask for only the information we need to provide the service you've requested. The Mice Groups does not currently collect personal identifying information via its website except (i) to the extent that you provide this information in an online job application and (ii) to the extent that your web browser provides personal identifying information. The Mice Groups will use your personally identifying information solely for the purpose for which you submitted the information. The Mice Groups may, however, aggregate certain elements of your personal identifying information with the information of other users of our website to analyze the usefulness and popularity of various web pages on its website. The Mice Groups reserves the right to change this policy at any time by posting a new privacy policy at this location. Questions regarding this statement should be directed to *******************

About the Role The Materials Developer is responsible for leading the end-to-end development, commercialization, and quality assurance of trims, and labels for assigned product categories. This role acts as the primary technical owner for all material details, driving supplier performance, and ensuring all components meet the company's quality, cost, and sustainability targets with minimal supervision. The Developer proactively analyzes development bottlenecks, introduces process improvements, and serves as the internal technical expert for their material portfolio. You'll Make a Difference By Development Ownership Independently managing seasonal trim and label development for assigned categories. (All TOPS Apparel and BOTTOMS Sundries) Translating design intent into manufacturable specifications and proactively identify technical risks. Communicating timelines and requirements directly with suppliers to ensure on-time execution. Troubleshooting development issues impacting SMS and production, providing solutions to cross-functional partners. Technical Expertise & Quality Reviewing and approving lab dips and submits based on color standards, tolerances, and performance requirements. Coordinating all material testing and ensuring compliance with company and industry standards. Evaluating supplier performance data and supporting continuous quality improvement with key vendors. Data Management & Process Improvement Maintaining accurate material and color data in Centric PLM; ensuring all commercialized materials are production-ready. Using PLM reporting to forecast calendar risks and development delays. Recommending improvements to processes, approval flow, and PLM data structure to increase efficiency. Cross-Functional Collaboration Serving as the technical contact for suppliers, factories, Design, Production, Sourcing, and QA. Maintaining an organized trims and labels catalog in the material library for team reference. Other duties as assigned. About You BA/BS in Apparel Design, Textiles, or related field. 3-5 years of experience in the apparel industry. Understanding of the end-to-end design and development process. Basic knowledge of textile properties, including dyeing, finishing, and fabric performance. Strong organizational skills and ability to utilize systems and tracking tools effectively. Strong communication skills with clear and concise follow-through. Effective time management and ability to work collaboratively in a team environment. Critical thinker with analytical, problem-solving, and adaptable mindset. Experience with Centric PLM, Microsoft Office, and Excel. About Ariat Ariat is an innovative, outdoor global brand with roots in equestrian performance. We develop high-quality footwear and apparel for people who ride, work, and play outdoors, and care about performance, quality, comfort, and style. The salary range for this position is $75,000 - $85,000 per year. The salary is determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data for geographic locations. Ariat in good faith believes that this posted compensation range is accurate for this role at this location at the time of this posting. This range may be modified in the future. Ariat's holistic benefits package for full-time team members includes (but is not limited to): Medical, dental, vision, and life insurance options Expanded wellness and mental health benefits Paid time off (PTO), paid holidays, and paid volunteer days 401(k) with company match Bonus incentive plans Team member discount on Ariat merchandise Note: Availability of benefits may be subject to location & employment type and may have certain eligibility requirements. Ariat reserves the right to alter these benefits in whole or in part at any time without advance notice. Ariat will consider qualified applicants, including those with criminal histories, in a manner consistent with state and local laws. Ariat is an Equal Opportunity Employer and considers applicants for employment without regard to race, color, religion, sex, orientation, national origin, age, disability, genetics or any other basis protected under federal, state, or local law. Ariat is committed to providing reasonable accommodations to candidates with disabilities. If you need an accommodation during the application process, email *************************. Please see our Employment Candidate Privacy Policy at ********************* to learn more about how we collect, use, retain and disclose Personal Information. Please note that Ariat does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agreement, Ariat will not consider or agree to payment of any referral compensation or recruiter/agency placement fee. In the event a recruiter or agency submits a resume or candidate without a previously signed Agreement, Ariat explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resumes, including those submitted directly to hiring managers, are deemed to be the property of Ariat.

TITLE: PLATING PROCESS TECHNICIAN FLSA STATUS: NON-EXEMPT A SHIFT: MONDAY THRU WEDNESDAY AND EVERY OTHER THURSDAY 6:00 AM TO 6:00 PM REPORTS TO: DIRECTOR, PLATING PROCESS ENGINEERING Under the direction of the Director of Plating Process Engineering, the Plating Process Technician provides support to the engineering teams in the plating area, including assisting with wet etch process, preparing and maintaining recipes, reviewing and documenting process or procedures, and expediting and dispositioning prototype wafers; maintains process controls using Statistical Process Control (SPC), collects and analyzes data, and recommends corrective action. This position is located in Milpitas, California. ESSENTIAL FUNCTIONS: Provides support to the engineering teams in the plating, wet etch, and stripping process areas Supports the plating, wet etch, and stripping processes by preparing, maintaining, and setting up recipes to ensure an efficient and consistent process Reviews and documents processes and procedures; partners with engineering to implement changes effectively Expedites and dispositions prototype wafers in the plating, wet etch and stripping areas Assists engineers to run plating process development experiments, collects and analyzes data, and recommends corrective action if required Reviews and maintains process controls using SPC and prepares charts and graphs Assists with routine trouble-shooting and resolves basic process-related issues Participates in and recommends modifications to procedures or processes in support of continuous improvement initiatives Collaborates with Engineering to qualify or approve new processes or procedures Creates reports, charts, or graphs on an ad-hoc or routine basis Prepares daily pass down report for engineers, next shift plating process technicians, and manufacturing plating technicians Responds to inquiries from other team members, managers, or departments Adheres to all safety policies and procedures as required Performs other duties of a similar nature or level* MINIMUM QUALIFICATIONS: Associates degree in Electronics or Industrial Technology and/or equivalent relevant experience Two years of experience working in the semiconductor industry Knowledge of plating, wet processes and procedures Hands on experience using metrology tools such as pH meter, Tencor Thickness Profiler, XRF, and B-H loop tools Proficient in the use of Microsoft Office Applications Required Knowledge, Skills, and Abilities: Knowledge of semiconductor or hard disk drive (HDD) principles and processes Knowledge and ability to use SPC to maintain process controls Knowledge of plating, wet processes and procedures Ability to collect and analyze data, present findings, and recommend corrective action Ability to adhere to all safety policies and procedures Ability to communicate effectively with all levels of employees and management Demonstrated ability to follow routine verbal or written instructions Demonstrated problem solving and organizational skills Demonstrated time management and prioritization skills Skilled at resolving issues quickly and efficiently Flexible and able to prioritize The hourly rate for this full-time position is between $25.00-$40.00 + bonus target + benefits. Within the range the individual pay may differ depending on additional factors including job responsibilities, job related knowledge, skills, abilities, education, and experience. The hourly pay range shown is subject to change and may be modified periodically. WORKING CONDITIONS: The Plating Process Technician works primarily in an indoor environment on A shift which is Monday thru Wednesday and every other Thursday 6:00 AM to 6:00 PM. The schedule may be altered from time-to-time to meet business or operational needs; may travel from building-to-building as needed. Works in a class 100 ESD sensitive wafer manufacturing facility; wears a cleanroom (bunny) suit, including hood, gloves, safety glasses, booties, and mask. May be exposed to hazardous conditions, chemicals, fumes, and/or gases during the course of work day; Stands and walks; performs various fine grasping movements, bends, and twists; operates a computer and enters information using a keyboard, operates a telephone, and other office equipment. Must be able to load and unload various wet etch chemical solutions several times per shift. May be required to push, pull, or lift up to 25 pounds. *Other duties of a similar nature or level are duties that may be required, but may not be specifically listed in the job description or posting. TDK/Headway Technologies, Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, national origin, age, disability, or genetics. Applicants requiring accommodation in order to complete the application process should contact the Headway Human Resources Department.

Ultimate Staffing is seeking an Electrical Test Technician/Failure Analysis Engineer in Computers/Laptops for our client in Santa Clara. This is a 100% onsite, temp to perm role with a negotiable starting pay of $35-$45 an hour. Monday -Friday 9am-6pm. Summary The Failure Analysis Engineer uses procedures and instructions to initiate the analysis process when product failure occurs. Investigations are researched for root causes with analysis documented, recorded, and communicated internally and with the client company. Responsible for failure analysis on Customer returned Server/ GPU boards to component level. Essential Duties and Responsibilities include the following. Other Duties not listed may be assigned. Data Analysis/Communication/Issue Resolution - Prevention - 90% of Job · Have ability to system and board level testing and debugging down to components level. · Have knowledge to do component swapping, removal to isolate failures and overall deeper FA · Visual mechanical inspection (VMI) of Server/GPU board components (Motherboards, GPU, GPU baseboard, CPU, DIMM, NIC, SSD, Power Supply, etc.) and/or electronics components · Completes component level trouble shooting (capacitor, resistors, fuse, IC, diode, chip, etc.) and failure analysis · Assembly & disassembly of units, computer components and subcomponents · Skilled in communication, problem solving, and applying experience and expertise. · Complete sample analysis for equipment and process qualifications. · Identify optimum analytical approaches critical to problems. · Conduct innovative use of new analytical tools, equipment, and methodologies. · Develop records and perform various failure analysis on systems and components to identity root cause. · Develop formal failure analysis data reporting and present internally and to client. · Requires communication with Asia team in emails and conference calls. · Be proficient in a large number of applications used for database management and reporting. · Follows procedures and diagrams in performing engineering change orders, as required Other duties as assigned. Education and/or Experience · Bachelor's degree in Electrical Engineering · 4 years experience in a failure analysis role · Comprehensive server knowledge is essential. (BIOS / BMC / CPLD / FPGA, etc.) · Ability to use electronic test equipment (oscilloscopes / multi-meters / thermal imaging camera, etc.) Essential Skills: · Requires excellent written and oral communication skills. · Knowledge of basic Linux environment and commands · Familiarity with Microsoft Office software (advanced excel) · Familiar with computer software and operating systems and possess the ability to identify and perform software updates (BIOS, BMC, Components Firmware, etc.) · Ability to read and interpret schematics/block diagrams with detailed understanding of server and subassembly functionality. · Ability to read and interpret system board views and board layout details · Effectively communicate concepts and solutions with various levels of the organization. · Effectively liaison between Company and Client. · Must be able to work cross-functionally with minimal supervision. · Requires strong analytical and statistical skills. · Requires flexibility to work overtime for special projects or business supports. Desired Skills and Experience Ultimate Staffing is hiring Failure Analysis Engineers to work onsite at our customers' site in Santa Clara CA. All qualified applicants will receive consideration for employment without regard to race, color, national origin, age, ancestry, religion, sex, sexual orientation, gender identity, gender expression, marital status, disability, medical condition, genetic information, pregnancy, or military or veteran status. We consider all qualified applicants, including those with criminal histories, in a manner consistent with state and local laws, including the California Fair Chance Act, City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, and Los Angeles County Fair Chance Ordinance. For unincorporated Los Angeles county, to the extent our customers require a background check for certain positions, the Company faces a significant risk to its business operations and business reputation unless a review of criminal history is conducted for those specific job positions.

Join Yorke Engineering, LLC, an Environmental Consulting leader in California that implements Environmental Engineering and Compliance solutions for our clients throughout California. Our mission is to solve environmental compliance problems for industrial and governmental/infrastructure facilities. We are a growing and dynamic organization of highly respected professionals. Yorke Engineering, LLC has assisted over 1,400 client organizations with their Air Quality and Environmental Compliance, Engineering, and Permitting needs. Our philosophy is to efficiently help government and industrial customers with the complex array of environmental laws and regulations. From simple permits to complex agency negotiations, from small companies to the largest of California's organizations, Yorke successfully solves our clients' Air Quality and Environmental challenges. Our team has over 1,000 years of combined environmental experience and consists of engineers and scientists that specialize in Air Quality, Waste, Water, CEQA, Safety, and Industrial Hygiene. We are looking for a sharp Mid to Senior level Air Quality Engineer/Scientist (Environmental Permitting and Compliance) to join our team in Northern CA. This is a full-time position at 40 hours per week from one of our Northern CA offices (Berkeley, San Francisco, or San Jose) during our normal business hours. We offer competitive salaries, a full benefits package including Paid Time Off, Holidays, Full Medical/Dental/Vision, along with a 401k program with a generous company match. Position Summary: The Mid to Senior level Air Quality Engineer/Scientist (Environmental Permitting and Compliance) performs professional engineering work, leading and executing the compliance and permitting functions in relation to Air Quality Regulations and Compliance. This candidate will be reviewing processes and equipment, analyzing permit-related technical and regulatory issues, and communicating those analyses within Yorke, the client organization, with government agencies and with the public at large. The work is challenging, broad in scope, and variable from project to project. The position involves effective communication, decision-making, and time management. The candidate performs other duties as required or assigned. The candidate's experience and qualifications we are seeking include: 5-15+ years of work experience in the Air Quality and/or Environmental industry in an engineering role (preferably in a consulting environment); Experience in the environmental services industry focusing on Air Quality services: Process and equipment review; Air quality permitting under BAAQMD, SCAQMD, SJVAPCD and other Air Districts, including Title V Permitting; RECLAIM implementation and reporting; Annual Emissions Reporting; Air Dispersion Modeling; Air Quality Assessments including Data Analysis and Emission Inventories; General Air Quality Compliance for facilities in CA. Ability to be an active team member on project teams towards project completion within project scope, budget and schedule and ensure quality work product and deliverables; Ability to work with clients, staff, and regulators through effective communication and expertise by fostering a collaborative environment without losing focus of quality; Proven track record or desire to engage in successful regulatory work in dealing with the SCAQMD, BAAQMD, SJVAPCD, EPA, CARB and/or other similar regulatory agencies; Experience or desire to work on-site at client facilities; Prepare reports and submissions in timely manner; Experience with handling highly technical data and technical data interpretation; Highly motivated to continue working in Air Quality environmental field and expand their knowledge and experience; CA Regulatory/Compliance experience is required. Job Requirements: B.S or M.S. degree in Chemical Engineering, Environmental Engineering, or Mechanical Engineering, or other relevant technical degrees from an accredited college (minimum GPA of 3.0); Ability to work collaboratively in a team fashion, handle several projects at once, prioritize work, and work efficiently; Desire to learn or developing technical expertise in environmental rules and regulations; Excellent oral and written communications skills; Experience in conflict resolution and crisis management; Track record of successful analysis, interpretation, and application of rules and regulations towards practical solutions; Ability to think critically and develop solutions; Software Knowledge: Strong Microsoft Excel, Word, Outlook, and Powerpoint skills (required); Microsoft 365 Applications, including Sharepoint (a plus) EIT, CPP or P.E. Certification (a plus).

Job Requirements Qualifications: Strong experience in automation testing using Playwright and Typescript (automation first mindset) Experience working as a Quality Assurance Engineer 3+ years' experience in manual testing Strong experience in API and Backend testing of cloud technologies Experience with API contract validation, versioning Experience working with SQL/NoSQL systems UI automation Strong coding experience with automated testing frameworks, tools and services Preferred Qualifications: Fluency in programmatic-level testing, user-level automation, and API level testing Experienced in Agile or Scrum software development methodologies Supply chain experience is plus Role details As a Quality Assurance Engineer, you will play a key role in setting up the testing strategy and tools for testing cloud software systems and features from the ground up. You will test a wide range of cloud technologies both in isolation and within the larger product ecosystem. The successful candidate for this role will be obsessed with finding and categorizing bugs, ensuring feature completeness and assessing reliability and performance of cloud systems. Proven experience as a Software Automation Engineer (2-3+ years) with strong hands-on skills in Playwright/TypeScript. An eye towards automation to perform repetitive testing tasks as well as regression testing covering various versions of end user client software. Provide coding and testing expertise for our team and be a constant advocate for our customers. High level of coding aptitude combined with a demonstrated passion for Quality Assurance and be responsible to own and drive complex projects. Test Automation Frameworks: Design and implement robust Test Automation Frameworks to ensure reusability, maintainability, and scalability of automation scripts. Continuous Improvement: Stay up to date with emerging technologies and best practices in test automation and continuously optimize the test automation process. Strong coding skills in TypeScript/React/Nest and Python/Java Proven experience in UI, API, and backend integration tests

At Apple, we work every single day to craft products that enrich people's lives. Do you love working on challenges that no one has solved yet? As a member of our cellular standards group, you will have the unique and rewarding opportunity to shape the global wireless industry and contribute to upcoming products that will delight and encourage millions of Apple's customers every single day! In this technical role, you will be at the center of our cellular standards group responsible for promoting the wireless technologies of our innovative wireless SoC products. You will have the chance to create algorithms and architectures of wireless communication systems, as well as collaborate with extraordinary RF/analog, HW, SW designers and architects to design SoC products to millions of Apple customers! In this role, core responsibilities include, but are not limited to the following: Designing and simulating wireless communication systems for 5G and 6G technologies, including channel coding, advanced MIMO systems, protocols for energy saving, AI/ML for air interface enhancements, sensing techniques, control and data channel optimization for cellular systems. Attending global standards meetings, including 3GPP, to promote Apple product preferences. Collaborate with product teams and come up with novel architecture, protocols, and algorithms to meet the requirements of emerging applications in a challenging radio environment. Ph.D. with a focus on communication systems, signal processing or AI/ML for wireless communication Knowledge in existing wireless communication protocols, such as 5G/LTE/WCDMA/GSM, 802.11a/b/g/n/ac/ax/be, 802.11ad/ay or Bluetooth/BLE. Strong understanding of communication theory and relevant algorithm design experience on, including but not limited to, timing recovery, automatic gain control, modulation, channel estimation, equalization, MIMO signal estimation and detection, channel coding and error correction, and beam forming algorithms Experience in designing systems that operate efficiently in high-load and noisy environments. Experience on low-power algorithm design for power critical applications. Experience with multi-radio coexistence management. Deep understanding of components/modules within wireless communication systems, and the possible impairments from those components, and the corresponding calibration and impairment reduction methods/algorithms, digital pre-distortion, PAPR reduction algorithms, Tx power control, etc. Experience in modem architecture, microprocessor architecture, hardware and software control. Working knowledge of wireless communication systems (e.g., OFDM/MIMO, etc.). Proven experience in the algorithm development and implementation design of communication systems or signal processing algorithms, and ability to develop and implement performance tuning strategies and optimizations. Experience with Matlab or Python and/or C/C++ for algorithm development, modeling, and simulation. Excellent communication skills to collaborate with cross-functional teams. Motivated to collaborate and contribute as a team, and able to deliver ambitious tasks in a timely manner. BS and 10+ years of relevant experience is required.

At Meta Reality Labs, we are developing the future of Wearables and Mixed Reality products. This team focuses on developing display and optics technologies for Meta products, creating see-through display systems that seamlessly blend the real and virtual realms. The role involves designing architecture and display sub-systems for wearable glasses, developing and implementing test, characterization, metrology, and data solutions to support transparent display systems.We're seeking an experienced Engineer to join our Reality Labs team, where you'll play a pivotal role in shaping the future of wearables. As a key member of our team, you'll explore innovative architectures and design spaces for our wearable devices, develop and analyze components, and drive detailed analysis. In this role, you will be part of a dynamic environment where you will consistently switch between high-level thinking and meticulous attention to detail to mature our architectures and designs. **Required Skills:** Optical Device Modeling Engineer Responsibilities: 1. Lead cross-functional teams in the design, development, and implementation of cutting-edge optical solutions for new optics architectures, utilizing innovative materials and processes 2. Identify, incubate, and productize optical technologies that have the potential to revolutionize the field of Wearable optics 3. Specify key performance metrics, test methods, and test requirements for optical components and systems 4. Develop and maintain technical roadmaps 5. Interface with stakeholders and leadership to influence product roadmaps 6. Stay updated on industry trends, emerging technologies, and competitor activity 7. Manage budgets, resources, and collaborations with global vendors **Minimum Qualifications:** Minimum Qualifications: 8. Bachelor's degree in Optical Engineering, Electrical Engineering, Physics, or a related technical discipline 9. 6+ years of industry experience with a proven track record of full product development cycle of Consumer Electronics 10. Experience and expertise in these areas: optical design software, geometrical optics, wave optics, and polarization optics, optical materials, coatings, manufacturing processes, Imaging optics design and manufacturing, display optics, optical sensing, optical system integration and testing 11. Technical leadership, communication, and project management skills 12. Problem-solving, analytical, and critical thinking skills **Preferred Qualifications:** Preferred Qualifications: 13. Advanced degree in Optical Engineering, Electrical Engineering, Physics, or a related technical discipline 14. In-depth knowledge of electromagnetic modeling techniques, such as the finite element method (FEM), finite-difference time-domain (FDTD), and rigorous coupled-wave analysis (RCWA) 15. Experience working with optical design software such as Meep, Lumerical, LightTools, Zemax, Code V, FRED, or similar 16. Experience in building predictive optical models, validating designs and models with metrology data, and closing the loop between simulations and measurements 17. Experience using scripting languages and data analysis tools such as Python, JMP, or MATLAB 18. Experience working with external vendors to deliver custom optical components, modules, or systems, involving challenging optical requirements to drive innovative fabrication process development, and new opto-mechanical integration and metrology techniques 19. Process development and failure analysis experience for optical components and modules such as cameras, sensors, or illumination/projector systems 20. Experience in developing optical modules or systems in highly multidisciplinary environments, including setting specifications, determining test methods, and overall module and system integration **Public Compensation:** $139,000/year to $200,000/year + bonus + equity + benefits **Industry:** Internet **Equal Opportunity:** Meta is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state and local law. Meta participates in the E-Verify program in certain locations, as required by law. Please note that Meta may leverage artificial intelligence and machine learning technologies in connection with applications for employment. Meta is committed to providing reasonable accommodations for candidates with disabilities in our recruiting process. If you need any assistance or accommodations due to a disability, please let us know at accommodations-ext@fb.com.

** Sandisk understands how people and businesses consume data and we relentlessly innovate to deliver solutions that enable today's needs and tomorrow's next big ideas. With a rich history of groundbreaking innovations in Flash and advanced memory technologies, our solutions have become the beating heart of the digital world we're living in and that we have the power to shape. Sandisk meets people and businesses at the intersection of their aspirations and the moment, enabling them to keep moving and pushing possibility forward. We do this through the balance of our powerhouse manufacturing capabilities and our industry-leading portfolio of products that are recognized globally for innovation, performance and quality. Sandisk has two facilities recognized by the World Economic Forum as part of the Global Lighthouse Network for advanced 4IR innovations. These facilities were also recognized as Sustainability Lighthouses for breakthroughs in efficient operations. With our global reach, we ensure the global supply chain has access to the Flash memory it needs to keep our world moving forward. **Job Description** **Essential Duties & Responsibilities:** + In this position, the individual will be responsible to develop NAND memory trim, push the performance and reliability envelope of flash memory which is used in best-in-class high-density storage application + The individual will be responsible for working in partnership with NAND design and system development teams to drive technology & product development + The individual will be responsible for defining, developing and executing NAND flash memory performance and reliability tests; analyze & report data to cross-functional teams to drive product and process improvements + The individual will communicate & work with members from process, design, reliability, and system groups to ensure timely product device support, memory qualification, and ramp of volume production **Qualifications** **Required:** + MS/PhD degree in Electrical Engineering, Applied Physics, or a related field + In-depth knowledge of semiconductor device physics, process, and reliability, as well as circuit design. NAND flash memory device and physics knowledge is also a must. + C/C++/Java Programming and Perl/Python Scripting + Ability to analyze problem and work independently as required **Preferred skills:** + PhD degree + Industry experience in semiconductor memory development, device engineering, reliability engineering, product/test engineering, is strongly preferred + Excellent communication and teamwork abilities **Additional Information** Sandisk is committed to providing equal opportunities to all applicants and employees and will not discriminate against any applicant or employee based on their race, color, ancestry, religion (including religious dress and grooming standards), sex (including pregnancy, childbirth or related medical conditions, breastfeeding or related medical conditions), gender (including a person's gender identity, gender expression, and gender-related appearance and behavior, whether or not stereotypically associated with the person's assigned sex at birth), age, national origin, sexual orientation, medical condition, marital status (including domestic partnership status), physical disability, mental disability, medical condition, genetic information, protected medical and family care leave, Civil Air Patrol status, military and veteran status, or other legally protected characteristics. We also prohibit harassment of any individual on any of the characteristics listed above. Our non-discrimination policy applies to all aspects of employment. We comply with the laws and regulations set forth in the "Know Your Rights: Workplace Discrimination is Illegal (************************************************************************************** " poster. Our pay transparency policy is available here (*********************************************************************************************** . Sandisk thrives on the power and potential of diversity. As a global company, we believe the most effective way to embrace the diversity of our customers and communities is to mirror it from within. We believe the fusion of various perspectives results in the best outcomes for our employees, our company, our customers, and the world around us. We are committed to an inclusive environment where every individual can thrive through a sense of belonging, respect and contribution. Sandisk is committed to offering opportunities to applicants with disabilities and ensuring all candidates can successfully navigate our careers website and our hiring process. Please contact us at jobs.accommodations@sandisk.com to advise us of your accommodation request. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying. \#LI-TG1

Principal Applications Engineer (Mass Spectrometry) 🟢 Experience 5 to 12 years 📍 Milpitas, California, USA 🟢 Full-time | Onsite Role 🟢 U.S. Citizens & Green Card Holders Only 🚀 We are hiring a Principal Applications Engineer - Mass Spectrometry This role is ideal for engineers who thrive in analytical instrumentation, customer engagement, and semiconductor or high-tech environments. ✅ About the Role We are seeking an experienced Principal Applications Engineer with a strong background in mass spectrometry and gas analyzers to support customers, solve technical challenges, and provide high-level applications expertise. This position requires a hands-on professional with excellent communication skills, strong technical depth, and the ability to work directly with customers to resolve instrumentation-related queries. ✅ Key Responsibilities Experience in analytical instrumentation, including mass spectrometers and gas analyzers Ability to engage with customers, handle inquiries, troubleshoot issues, and provide application-level support Familiarity with semiconductor manufacturing processes Self-motivated and proactive in customer interaction and problem-solving Willingness to travel for customer visits, installations, or support needs ✅ Education 🎓 Bachelor's degree in Engineering (Electronics / Electrical background highly preferred) ✅ Requirements ✅ U.S. Citizen or Green Card Holder ✅ Strong experience in mass spectrometry / gas analysis instrumentation ✅ Customer-facing experience ✅ Semiconductor process knowledge ✅ Ability to travel for onsite support If you have the passion to work with advanced instrumentation, support high-tech customers, and be part of a fast-moving engineering environment, we'd love to connect with you. 📩 Apply or share your resume at: **************** keywords: Experience with mass spectrometry, analytical instrumentation, LC-MS, GC-MS, gas analyzers, scientific instruments, spectroscopy, vacuum systems, ion source technologies, high-precision measurement tools, semiconductor process equipment, wafer fabrication instrumentation, contamination monitoring systems, process control instrumentation, plasma and deposition tools, metrology systems, life sciences instrumentation, molecular diagnostics platforms, DNA sequencing technologies, biomedical instrumentation, lab automation systems, electronics engineering, sensor-based devices, hardware troubleshooting, calibration, system integration, customer-facing technical support, field applications engineering, instrumentation engineering, applications specialist roles, and advanced manufacturing instrumentation Best Regards Mohammed Javed Shaikh EMC- Executive Management Consultant Contact No: US- *************** | India - +91 92233 08247 Email ID - ****************

Do you want to shape the future of technology and multimedia? Apple's Multimedia Engineering team is looking for a video standards engineer who will represent the voice of Apple Multimedia in standards bodies around the world. In this role, you will join a small team that is responsible for Apple's engagement with several standards developing organizations including Alliance for Open Media (AOM), ITU, MPEG, 3GPP, and others. You will investigate and develop new media technologies collaborate with other teams within Apple in such development and then engage with these organizations for their standardization. As a video standards engineer, you will be a member of a team that represents Apple in the international standards' community. In this role you will be providing a clear position on our analysis of ongoing standards, refining and commenting on work in progress, proposing and driving to completion Apples initiatives and in general, steering the work to develop the field in line with Apple's vision and values. You may also represent Apple at standardization calls and meeting, integrating the feedback of the Apple community on the ongoing work and representing that at meetings. You will engage with various standards bodies, including the Alliance for Open Media, MPEG, 3GPP, ITU etc. and you will be involved in the development of new 2D and 3D multimedia standards. This position requires travel. Awareness of the interaction of intellectual property and standards. Curiosity and interest in new technologies and ideas especially pertaining to multimedia. Excellent judgement and integrity with the ability to make timely and sound decisions. Self-motivation and creative and critical thinking capabilities. Strong Collaboration Skills The ability to prioritize, drive and supervise initiatives. M.S. or higher in EE/CE/CS with a focus in software engineering and or signal processing Knowledgeable in video compression and the multimedia field in general, including 3D visual information coding. Good knowledge of the development of international standards, especially those pertaining to video/multimedia compression. Experienced in developing sophisticated video compression technologies such as MPEG-4 AVC, HEVC, VVC, or AOMedia's AV1 adn AV2 helpful. Track record of effective participation. Able to develop, analyze, propose and refine new algorithms and techniques; help develop Apples intellectual property position with inventions and filings. Experienced in key multimedia specifications from AOM, ISO, ITU, SMPTE, etc. Familiar with software development tools including Xcode, Git etc. Proficient in practical software development and able to contribute to large codebases e.g. of reference software (C, C++). Excellent writing, speaking, presentation and other interpersonal skills.

At Meta Reality Labs, we are developing the future of Wearables and Mixed Reality products. This team focuses on developing display and optics technologies for Meta products, creating see-through display systems that seamlessly blend the real and virtual realms. The role involves designing architecture and display sub-systems for wearable glasses, developing and implementing test, characterization, metrology, and data solutions to support transparent display systems. We're seeking an experienced Engineer to join our Reality Labs team, where you'll play a pivotal role in shaping the future of wearables. As a key member of our team, you'll explore innovative architectures and design spaces for our wearable devices, develop and analyze components, and drive detailed analysis. In this role, you will be part of a dynamic environment where you will consistently switch between high-level thinking and meticulous attention to detail to mature our architectures and designs. Minimum Qualifications * Bachelor's degree in Optical Engineering, Electrical Engineering, Physics, or a related technical discipline * 6+ years of industry experience with a proven track record of full product development cycle of Consumer Electronics * Experience and expertise in these areas: optical design software, geometrical optics, wave optics, and polarization optics, optical materials, coatings, manufacturing processes, Imaging optics design and manufacturing, display optics, optical sensing, optical system integration and testing * Technical leadership, communication, and project management skills * Problem-solving, analytical, and critical thinking skills Preferred Qualifications * Advanced degree in Optical Engineering, Electrical Engineering, Physics, or a related technical discipline * In-depth knowledge of electromagnetic modeling techniques, such as the finite element method (FEM), finite-difference time-domain (FDTD), and rigorous coupled-wave analysis (RCWA) * Experience working with optical design software such as Meep, Lumerical, LightTools, Zemax, Code V, FRED, or similar * Experience in building predictive optical models, validating designs and models with metrology data, and closing the loop between simulations and measurements * Experience using scripting languages and data analysis tools such as Python, JMP, or MATLAB * Experience working with external vendors to deliver custom optical components, modules, or systems, involving challenging optical requirements to drive innovative fabrication process development, and new opto-mechanical integration and metrology techniques * Process development and failure analysis experience for optical components and modules such as cameras, sensors, or illumination/projector systems * Experience in developing optical modules or systems in highly multidisciplinary environments, including setting specifications, determining test methods, and overall module and system integration Responsibilities * Lead cross-functional teams in the design, development, and implementation of cutting-edge optical solutions for new optics architectures, utilizing innovative materials and processes * Identify, incubate, and productize optical technologies that have the potential to revolutionize the field of Wearable optics * Specify key performance metrics, test methods, and test requirements for optical components and systems * Develop and maintain technical roadmaps * Interface with stakeholders and leadership to influence product roadmaps * Stay updated on industry trends, emerging technologies, and competitor activity * Manage budgets, resources, and collaborations with global vendors About Meta Meta builds technologies that help people connect, find communities, and grow businesses. When Facebook launched in 2004, it changed the way people connect. Apps like Messenger, Instagram and WhatsApp further empowered billions around the world. Now, Meta is moving beyond 2D screens toward immersive experiences like augmented and virtual reality to help build the next evolution in social technology. People who choose to build their careers by building with us at Meta help shape a future that will take us beyond what digital connection makes possible today-beyond the constraints of screens, the limits of distance, and even the rules of physics. Equal Employment Opportunity Meta is proud to be an Equal Employment Opportunity employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth, reproductive health decisions, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, genetic information, political views or activity, or other applicable legally protected characteristics. You may view our Equal Employment Opportunity notice here. Meta is committed to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans in our job application procedures. If you need assistance or an accommodation due to a disability, fill out the Accommodations request form.

Sandisk understands how people and businesses consume data and we relentlessly innovate to deliver solutions that enable today's needs and tomorrow's next big ideas. With a rich history of groundbreaking innovations in Flash and advanced memory technologies, our solutions have become the beating heart of the digital world we're living in and that we have the power to shape. Sandisk meets people and businesses at the intersection of their aspirations and the moment, enabling them to keep moving and pushing possibility forward. We do this through the balance of our powerhouse manufacturing capabilities and our industry-leading portfolio of products that are recognized globally for innovation, performance and quality. Sandisk has two facilities recognized by the World Economic Forum as part of the Global Lighthouse Network for advanced 4IR innovations. These facilities were also recognized as Sustainability Lighthouses for breakthroughs in efficient operations. With our global reach, we ensure the global supply chain has access to the Flash memory it needs to keep our world moving forward. Job Description ESSENTIAL DUTIES AND RESPONSIBILITIES: In this position, the individual will be responsible to develop NAND memory trim, push the performance and reliability envelope of flash memory which is used in best-in-class high-density storage application The individual will be responsible for working in partnership with NAND design and system development teams to drive technology & product development for improved performance and reliability The individual will be responsible for defining, developing and executing NAND flash memory performance and reliability tests; analyze & report data to cross-functional teams to drive product and process improvements The individual will communicate & work with members from process, design, reliability, and system groups to ensure timely product device support, memory qualification, and ramp of volume production In this position the candidate will be part of a team that sits at the hub of activities between storage business units, technology development, and manufacturing Qualifications REQUIRED: This position requires a M.S. or Ph.D. degree in Electrical Engineering, Applied physics, Material Science, or a related field, and 3+ years of relevant industry experience. It requires in-depth knowledge of semiconductor device physics, familiarity with advanced semiconductor processes, and knowledge in design of experiment and data analysis. SKILLS: The individual shall have strong analytical skills, and preferably have experience with scripting languages and/or statistical analysis tools. The individual must have the proven ability to achieve results in a fast moving, dynamic environment. The individual must be self-motivated and self-directed, must demonstrate ability to work well with people within and outside the team. Strong coding skills for data processing and automation (Python preferred). Proven ability to present complex data clearly and concisely. Experience using ML/AI for data analysis and modeling is a plus. Additional Information Sandisk is committed to providing equal opportunities to all applicants and employees and will not discriminate against any applicant or employee based on their race, color, ancestry, religion (including religious dress and grooming standards), sex (including pregnancy, childbirth or related medical conditions, breastfeeding or related medical conditions), gender (including a person's gender identity, gender expression, and gender-related appearance and behavior, whether or not stereotypically associated with the person's assigned sex at birth), age, national origin, sexual orientation, medical condition, marital status (including domestic partnership status), physical disability, mental disability, medical condition, genetic information, protected medical and family care leave, Civil Air Patrol status, military and veteran status, or other legally protected characteristics. We also prohibit harassment of any individual on any of the characteristics listed above. Our non-discrimination policy applies to all aspects of employment. We comply with the laws and regulations set forth in the "Know Your Rights: Workplace Discrimination is Illegal” poster. Our pay transparency policy is available here. Sandisk thrives on the power and potential of diversity. As a global company, we believe the most effective way to embrace the diversity of our customers and communities is to mirror it from within. We believe the fusion of various perspectives results in the best outcomes for our employees, our company, our customers, and the world around us. We are committed to an inclusive environment where every individual can thrive through a sense of belonging, respect and contribution. Sandisk is committed to offering opportunities to applicants with disabilities and ensuring all candidates can successfully navigate our careers website and our hiring process. Please contact us at [email protected] to advise us of your accommodation request. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying. Based on our experience, we anticipate that the application deadline will be 02/10/2026 (3 months from posting), although we reserve the right to close the application process sooner if we hire an applicant for this position before the application deadline. If we are not able to hire someone from this role before the application deadline, we will update this posting with a new anticipated application deadline. #LI-KH1 Compensation & Benefits Details An employee's pay position within the salary range may be based on several factors including but not limited to (1) relevant education; qualifications; certifications; and experience; (2) skills, ability, knowledge of the job; (3) performance, contribution and results; (4) geographic location; (5) shift; (6) internal and external equity; and (7) business and organizational needs. The salary range is what we believe to be the range of possible compensation for this role at the time of this posting. We may ultimately pay more or less than the posted range and this range is only applicable for jobs to be performed in California, Colorado, New York or remote jobs that can be performed in California, Colorado and New York. This range may be modified in the future. You will be eligible to participate in Sandisk's Short-Term Incentive (STI) Plan, which provides incentive awards based on Company and individual performance. Depending on your role and your performance, you may be eligible to participate in our annual Long-Term Incentive (LTI) program, which consists of restricted stock units (RSUs) or cash equivalents, pursuant to the terms of the LTI plan. Please note that not all roles are eligible to participate in the LTI program, and not all roles are eligible for equity under the LTI plan. RSU awards are also available to eligible new hires, subject to Sandisk's Standard Terms and Conditions for Restricted Stock Unit Awards. We offer a comprehensive package of benefits including paid vacation time; paid sick leave; medical/dental/vision insurance; life, accident and disability insurance; tax-advantaged flexible spending and health savings accounts; employee assistance program; other voluntary benefit programs such as supplemental life and AD&D, legal plan, pet insurance, critical illness, accident and hospital indemnity; tuition reimbursement; transit; the Applause Program, employee stock purchase plan, and the Sandisk's Savings 401(k) Plan. Note: No amount of pay is considered to be wages or compensation until such amount is earned, vested, and determinable. The amount and availability of any bonus, commission, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company's sole discretion, consistent with the law.

Principal Applications Engineer (Mass Spectrometry) 🟢 Experience 5 to 12 years 📍 Milpitas, California, USA 🟢 Full-time | Onsite Role 🟢 U.S. Citizens & Green Card Holders Only 🚀 We are hiring a Principal Applications Engineer - Mass Spectrometry This role is ideal for engineers who thrive in analytical instrumentation, customer engagement, and semiconductor or high-tech environments. ✅ About the Role We are seeking an experienced Principal Applications Engineer with a strong background in mass spectrometry and gas analyzers to support customers, solve technical challenges, and provide high-level applications expertise. This position requires a hands-on professional with excellent communication skills, strong technical depth, and the ability to work directly with customers to resolve instrumentation-related queries. ✅ Key Responsibilities Experience in analytical instrumentation, including mass spectrometers and gas analyzers Ability to engage with customers, handle inquiries, troubleshoot issues, and provide application-level support Familiarity with semiconductor manufacturing processes Self-motivated and proactive in customer interaction and problem-solving Willingness to travel for customer visits, installations, or support needs ✅ Education 🎓 Bachelor's degree in Engineering (Electronics / Electrical background highly preferred) ✅ Requirements ✅ U.S. Citizen or Green Card Holder ✅ Strong experience in mass spectrometry / gas analysis instrumentation ✅ Customer-facing experience ✅ Semiconductor process knowledge ✅ Ability to travel for onsite support If you have the passion to work with advanced instrumentation, support high-tech customers, and be part of a fast-moving engineering environment, we'd love to connect with you. 📩 Apply or share your resume at: **************** keywords: Experience with mass spectrometry, analytical instrumentation, LC-MS, GC-MS, gas analyzers, scientific instruments, spectroscopy, vacuum systems, ion source technologies, high-precision measurement tools, semiconductor process equipment, wafer fabrication instrumentation, contamination monitoring systems, process control instrumentation, plasma and deposition tools, metrology systems, life sciences instrumentation, molecular diagnostics platforms, DNA sequencing technologies, biomedical instrumentation, lab automation systems, electronics engineering, sensor-based devices, hardware troubleshooting, calibration, system integration, customer-facing technical support, field applications engineering, instrumentation engineering, applications specialist roles, and advanced manufacturing instrumentation Best Regards Mohammed Javed Shaikh EMC- Executive Management Consultant Contact No: US- *************** | India - +91 92233 08247 Email ID - ****************

Sandisk understands how people and businesses consume data and we relentlessly innovate to deliver solutions that enable today's needs and tomorrow's next big ideas. With a rich history of groundbreaking innovations in Flash and advanced memory technologies, our solutions have become the beating heart of the digital world we're living in and that we have the power to shape. Sandisk meets people and businesses at the intersection of their aspirations and the moment, enabling them to keep moving and pushing possibility forward. We do this through the balance of our powerhouse manufacturing capabilities and our industry-leading portfolio of products that are recognized globally for innovation, performance and quality. Sandisk has two facilities recognized by the World Economic Forum as part of the Global Lighthouse Network for advanced 4IR innovations. These facilities were also recognized as Sustainability Lighthouses for breakthroughs in efficient operations. With our global reach, we ensure the global supply chain has access to the Flash memory it needs to keep our world moving forward. Job Description Essential Duties & Responsibilities: In this position, the individual will be responsible to develop NAND memory trim, push the performance and reliability envelope of flash memory which is used in best-in-class high-density storage application The individual will be responsible for working in partnership with NAND design and system development teams to drive technology & product development The individual will be responsible for defining, developing and executing NAND flash memory performance and reliability tests; analyze & report data to cross-functional teams to drive product and process improvements The individual will communicate & work with members from process, design, reliability, and system groups to ensure timely product device support, memory qualification, and ramp of volume production Qualifications Required: MS/PhD degree in Electrical Engineering, Applied Physics, or a related field In-depth knowledge of semiconductor device physics, process, and reliability, as well as circuit design. NAND flash memory device and physics knowledge is also a must. C/C++/Java Programming and Perl/Python Scripting Ability to analyze problem and work independently as required Preferred skills: PhD degree Industry experience in semiconductor memory development, device engineering, reliability engineering, product/test engineering, is strongly preferred Excellent communication and teamwork abilities Additional Information Sandisk is committed to providing equal opportunities to all applicants and employees and will not discriminate against any applicant or employee based on their race, color, ancestry, religion (including religious dress and grooming standards), sex (including pregnancy, childbirth or related medical conditions, breastfeeding or related medical conditions), gender (including a person's gender identity, gender expression, and gender-related appearance and behavior, whether or not stereotypically associated with the person's assigned sex at birth), age, national origin, sexual orientation, medical condition, marital status (including domestic partnership status), physical disability, mental disability, medical condition, genetic information, protected medical and family care leave, Civil Air Patrol status, military and veteran status, or other legally protected characteristics. We also prohibit harassment of any individual on any of the characteristics listed above. Our non-discrimination policy applies to all aspects of employment. We comply with the laws and regulations set forth in the "Know Your Rights: Workplace Discrimination is Illegal” poster. Our pay transparency policy is available here. Sandisk thrives on the power and potential of diversity. As a global company, we believe the most effective way to embrace the diversity of our customers and communities is to mirror it from within. We believe the fusion of various perspectives results in the best outcomes for our employees, our company, our customers, and the world around us. We are committed to an inclusive environment where every individual can thrive through a sense of belonging, respect and contribution. Sandisk is committed to offering opportunities to applicants with disabilities and ensuring all candidates can successfully navigate our careers website and our hiring process. Please contact us at [email protected] to advise us of your accommodation request. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying. #LI-TG1