Process engineer jobs in Syracuse, NY - 103 jobs

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency (“RF”) components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards (“PCB”s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at *********** TTM is seeking a Parts, Materials & Processes Engineer I. Performing Parts, materials, and process engineering efforts assuring compliance to customer PM&P requirements across multiple programs with minimal supervision. General understanding of customer requirements and documentation of compliance through established PM&P engineering methods. Assist in root cause investigations. Review and understand customer requirements as related to PM&P. Review requests for new components to verify program requirements are satisfied. Maintain qualified and preferred parts, materials and processes lists for use by the design team. Research Bills of Material (BOMs) for new designs or design changes to document the required PM&P information, identify components that are obsolete, mature, and/or noncompliant with the product or program requirements. Assist in the performance of development and qualification activities. Create drawings consistent with TTM internal standards and program requirements. Assist in the performance of material characterization and analysis with respect to the study of electronics hardware failure mechanisms. Prepare ADPML and ABPML in accordance with program requirements under the direction of senior PM&P engineers Review project End Item Data Packages for prohibited/restricted PMP, material scans and as-built PMP listings under the direction of senior PM&P engineers Assist in PM&P support for design engineering, new product development teams, manufacturing, quality, and supply chain in resolving parts, materials and process related issues. Develop PM&P plans and documents under the guidance of senior PM&P engineers Assist in the preparation for, and participate in, internal or customer product design reviews , project kick-offs, CDRs (Critical Design Reviews) and periodic (weekly, monthly, etc) customer meetings as required. Support and assit in root cause analysis investigations for PM&P related issues. Assist in preparation for and participate in configuration control board meetings, as necessary Accept direction from senior engineers and perform the work in the allotted time with appropriate documentation Job Knowledge, Skills and Abilities Ability to work with a team of engineers and assume full responsibility for assigned projects and tasks. Analytical skills with ability to achieve results working either independently collaboratively with design, manufacturing and quality engineering teams. Ability to effectively convey pertinent information verbally and in writing to engineers, customers, and vendors. Ability to work well within a group as well as independently to perform tasks Ability to work under the guidance of experienced engineers. Ability to multi-task and handle simultaneous assignments/tasks while producing quality work. Familiar with structured problem solving and can effectively participate in root cause analysis. Ability to act in the best interest of both TTM and TTM's customers. Strong commitment to lifelong learning, willing and able to learn new skills. Ability to make sound logical decisions and justify decisions/actions. Self-motivated and goal oriented. EXPERIENCE: Experience 0-2 years Experience with space-level requirements and programs are preferred. EDUCATION: Bachelor's degree in Engineering, material science or related technical discipline OTHER: Must have a background that would permit the U.S. Department of Defense to issue a Secret clearance when necessary for work on a project that requires such a clearance. #LI-VT1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $75,028 - $125,047 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at *********** TTM is seeking a Parts, Materials & Processes Engineer I. Performing Parts, materials, and process engineering efforts assuring compliance to customer PM&P requirements across multiple programs with minimal supervision. General understanding of customer requirements and documentation of compliance through established PM&P engineering methods. Assist in root cause investigations. * Review and understand customer requirements as related to PM&P. * Review requests for new components to verify program requirements are satisfied. * Maintain qualified and preferred parts, materials and processes lists for use by the design team. * Research Bills of Material (BOMs) for new designs or design changes to document the required PM&P information, identify components that are obsolete, mature, and/or noncompliant with the product or program requirements. * Assist in the performance of development and qualification activities. * Create drawings consistent with TTM internal standards and program requirements. * Assist in the performance of material characterization and analysis with respect to the study of electronics hardware failure mechanisms. * Prepare ADPML and ABPML in accordance with program requirements under the direction of senior PM&P engineers * Review project End Item Data Packages for prohibited/restricted PMP, material scans and as-built PMP listings under the direction of senior PM&P engineers * Assist in PM&P support for design engineering, new product development teams, manufacturing, quality, and supply chain in resolving parts, materials and process related issues. * Develop PM&P plans and documents under the guidance of senior PM&P engineers * Assist in the preparation for, and participate in, internal or customer product design reviews , project kick-offs, CDRs (Critical Design Reviews) and periodic (weekly, monthly, etc) customer meetings as required. * Support and assit in root cause analysis investigations for PM&P related issues. * Assist in preparation for and participate in configuration control board meetings, as necessary * Accept direction from senior engineers and perform the work in the allotted time with appropriate documentation Job Knowledge, Skills and Abilities * Ability to work with a team of engineers and assume full responsibility for assigned projects and tasks. * Analytical skills with ability to achieve results working either independently collaboratively with design, manufacturing and quality engineering teams. * Ability to effectively convey pertinent information verbally and in writing to engineers, customers, and vendors. * Ability to work well within a group as well as independently to perform tasks * Ability to work under the guidance of experienced engineers. * Ability to multi-task and handle simultaneous assignments/tasks while producing quality work. * Familiar with structured problem solving and can effectively participate in root cause analysis. * Ability to act in the best interest of both TTM and TTM's customers. * Strong commitment to lifelong learning, willing and able to learn new skills. * Ability to make sound logical decisions and justify decisions/actions. * Self-motivated and goal oriented. EXPERIENCE: * Experience 0-2 years * Experience with space-level requirements and programs are preferred. EDUCATION: * Bachelor's degree in Engineering, material science or related technical discipline OTHER: Must have a background that would permit the U.S. Department of Defense to issue a Secret clearance when necessary for work on a project that requires such a clearance. #LI-VT1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $75,028 - $125,047 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

Description: Continuous Improvement Engineer Reports To: Director of Plant Engineering FLSA Status: Exempt Job Grade: 9 Pay Range: $94,000-$134,000 The Continuous Improvement (CI) Engineer is responsible for identifying, analyzing, and driving the reduction of process losses and inefficiencies across all production areas. This role combines data-driven engineering with Lean Six Sigma methodologies to optimize performance, reduce waste, enhance quality, and improve overall operational reliability. The CI Engineer partners cross-functionally to design and implement sustainable systems that promote continuous learning, process discipline, and long-term cost savings. Key Responsibilities Process Loss Reduction & Data Analysis Lead data collection, analysis, and model development to identify and quantify losses throughout the facility (mass balance, product yields, line efficiencies, downtime, waste, etc.). Partner with Finance to ensure accurate accounting and financial impact of losses. Design, implement, and maintain tracking systems and dashboards for product loss, scrap, and process performance data. Lead root cause analysis and corrective/preventive action plans to eliminate recurring losses. Conduct daily and weekly loss reviews; communicate trends and recommend improvements. Continuous Improvement Leadership Lead and support site-wide CI initiatives across safety, quality, productivity, and cost optimization. Apply Lean Six Sigma and structured problem-solving techniques to identify and eliminate process waste. Develop and coach standard work, time studies, cycle time optimization, SMED, and line balance analysis. Establish and sustain daily management systems, tiered meetings, and KPI routines to reinforce accountability and performance improvement. Act as a change agent by coaching and mentoring operations, maintenance, and quality teams to build CI capability. Systems, Process & Equipment Optimization Collaborate with engineering, production, and maintenance to ensure systems (CIP, fillers, processing, filtration, etc.) are optimized to minimize product and utility losses. Verify that high-solids streams are properly managed and that drain losses are minimized. Support implementation of automation and digital transformation projects. Train and mentor employees on continuous improvement principles. Support initiatives in energy and water consumption reduction. Recommend and support process control improvements through updates to procedures, drawings, and automation logic (experience with CAD, SolidWorks, or PLCs a plus). Lead implementation of new CI and operational excellence workflows, tools, and performance routines. Cross-Functional Collaboration Partner closely with Quality, Finance, Engineering, and Production to align improvement priorities with business goals. Support and facilitate kaizen events and project-based initiatives focused on yield improvement and waste reduction. Communicate progress, lessons learned, and success stories to foster a culture of engagement and continuous learning. Skills & Qualifications Required Bachelor's Degree in Engineering (Chemical, Mechanical, Industrial, or related technical discipline). 3+ years of experience in food, beverage, or chemical process manufacturing. Proven track record of leading cross-functional projects focused on process optimization and waste reduction. Strong analytical, statistical, and problem-solving skills; data-driven mindset. Develop, track, and report key production metrics (OEE, yield, downtime, rework, etc.). Working knowledge of process flow, fluid mass balance, and manufacturing systems. Excellent interpersonal, communication, and presentation skills. Demonstrated ability to manage multiple projects and priorities in a fast-paced environment. Strong financial acumen to translate process improvements into measurable business impact. Proficiency in Excel, Power BI, and process mapping tools (Visio, Minitab, etc.) Experience with ERP and production data systems. Skills & Qualifications Preferred Lean Six Sigma Green or Black Belt certification. Experience in aseptic/dairy processing including UHT, homogenization, separation, filtration, and CIP systems. Familiarity with updating P&IDs and mechanical/electrical drawings (CAD/SolidWorks). Working understanding of PLC logic and automated control systems. Prior experience implementing daily management systems or operational excellence frameworks. Passion for sustainability, waste reduction, and continuous improvement. Physical Requirements: · Ability to navigate all areas of the facility, including office spaces, warehouse areas, and the exterior perimeter. · Must wear required personal protective equipment (PPE) as necessary to safely perform job duties. · Ability to stand, sit, and carry out tasks throughout a full shift, with appropriate meal breaks. · Physically capable of standing, bending, stooping, kneeling, reaching, twisting, lifting, pushing, pulling, climbing, balancing, and crouching as needed. · Able to lift and move items weighing up to 50 pounds independently and heavier objects with reasonable accommodations. · Visual acuity sufficient to perform job duties accurately. · Capable of assessing weights, judging distances, and working at various heights. Work Schedule: Typically, Monday-Friday 7am-4pm with flexibility to support a 24/7/365 operation as needs arise. Compensation: At Cayuga Milk Ingredients, we value a fair and comprehensive approach to compensation. Our wage range for this role is determined by various factors, including skill sets, experience, training, licensure, certifications, and organizational needs. It is not typical for an employee to start at or near the top of the range for the position. Compensation decisions are made based on individual job circumstances considering skill level, previous experience, and education requirements. Equal Opportunity Employer: Cayuga Milk Ingredients is committed to providing equal employment opportunities to all employees and applicants without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all aspects of employment, including recruitment, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Non-Discrimination Policy: The contractor will not discriminate against employees or applicants for discussing or disclosing their own pay or the pay of others. However, employees with access to compensation information as part of their job duties are prohibited from disclosing this information to unauthorized individuals, except in specific circumstances outlined by applicable laws and regulations (41 CFR 60-1.35(c)). General Statement: All Cayuga employees recognize that the success and prosperity of the company is everyone's responsibility. All employees are expected to treat each other in a positive, respectful, and professional manner, to be at work for their assigned shift and to work safely as a team. Employees must be self-starters who can relate to all levels of the organization. Disclaimer: o All requirements are subject to possible modification to reasonably accommodate individuals with disabilities. o This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor. o The company reserves the right to add to or revise an employee's job duties at any time at its sole discretion. o This document does not create an employment contract, implied or otherwise, other than an “at will” employment relationship. Requirements:

Due to growth and internal development we are now looking to hire additional resources for our Quality Assurance Team! Member of the Quality Assurance Team. Provide process engineering support and education to operators and supervisors in the Bar Mill, Cast Shop, and Rolling Mill. Provide limited support to Architectural Services. Monitor, control and make recommendations for improvements to various phases of manufacturing processes and equipment. Specify processing steps and processing parameters to manufacture Rolled Products to meet customer product requirements. Leads projects focused on continuous improvement of production processes. Duties and Responsibilities: Investigate production process needs. Coordinate and implement projects and action plans. Review customer requirements and specifications against manufacturing capabilities. Assure process used to manufacture product meets or exceed customer expectations. Evaluate Customer Inquiries for manufacturability and advise Customer Support and Marketing of unusual requirements that would affect lead-time and production cost/efficiency. Review and make recommendation for changes to Revere ASTM/CDA representative on various documentation and standards as requested. Determine alternative processing options to best utilize available capacity on mill machinery. Utilize Process Engineering Methods to Create and Modify: Product Masters Process Masters Customer (Testing) Element Files Packaging Instructions New Material Request Documentation for new and experimental materials used in processing and/or testing. Analyze and respond to customer complaints and corrective action requests: Reports Root Cause and Corrective Actions on Customer Complaints Refer off-quality products to affected Customers through Customer Support Visit Customers, outside Processors and MRO Vendors plants as necessary. Apply Technical applications of Process Engineering: Perform Capability and Control Statistical Studies internally and externally. Complete and maintain various APQP demands, including PPAP's, Capability Studies, Part Warrants, Gaging R&R, Process Flow Diagrams, PFMEA/FMEA's, etc. Use various diagnostic equipment and tools to monitor various Process Parameters. Perform simple laboratory testing such as pH, Hardness, Conductivity. Conduct process walks to observe material, processes, and operators. Create disposition of Non-compliant Product. Lead /participate in Mill Tours to visiting Customers, Vendors, and Community Members. Attend Architectural trade shows. Attend periodic meetings with Operations, Quality, and Sales & Marketing. Attends Weekly Reliability and Maintenance Planning Meetings and Backlog Meetings. Completes and maintains various APQP demands, including PPAP's, Capability Studies, Part Warrants, Gaging R&R, Process Flow Diagrams, PFMEA/FMEA's, etc. Creates and Modifies Job Instructions, Quality Assurance Plans, JIB's, OJT's etc. within Revere Document Control System. Initiates New Material Request Documentation for new and experimental materials used in processing and/or testing. Participates in Audits by Independent 3rd Parties and Customers. Perform Internal Audits, write audit findings, lead discussions at Audit Closing Meetings. Performs metallographic investigations on various samples to help determine root cause of defects when necessary. Reports Key Process and Product Metrics to various levels of the organization. Uses various diagnostic equipment and tools to monitor different Process Parameters. These include; dimensional gauging tools, thermometric devices, process data recording devices, hand-held tools, hand-held Profilometers, etc. Requirements Qualifications: Minimum: 3-5 years' experience as a Process Engineer in the production of Primary Metals (Steel, Aluminum, Copper) with knowledge and understanding of the relationship between process inputs and outputs. Preferred: 3 - 5 years of experience in the manufacture and quality management of primary metals (Copper, Steel, Aluminum), Mechanical and Physical material testing of metals. Experience in Problem Solving Methodology, Containment and Corrective Action Processes, APQP techniques. Thorough knowledge of Statistical Process Control techniques. Special Demands: Lifting/Handling various product samples that may have sharp edges or burrs. Exposure to Corrosive and volatile process Chemicals. Extremities of Heat/Cold mill environments. Possible dusty/smoky environments. Loud noise environments. Walking distances up to ¼ mile between various locations within the mill. Climbing/Descending Stairs and Ladders within the mill and offices. Exposure to mobile equipment and overhead cranes. Standing for long periods. Possible slippery floors and walkways. Outdoor work is possible. Reduced lighting environments are possible. Proximity to moving machinery. Occasional overnight travel. Education / Training: Minimum: Bachelor degree in a Physical Science (Physics, Chemistry) or Mechanical Engineering, Mechanical Technology, or Chemical Engineering. Knowledge of Statistical Techniques is a plus. Proficiency in Microsoft Office products. Preferred: Bachelor Degree in Material Science, Extractive Metallurgy, or Refractory Engineering. Six Sigma Certification, and experience in APQP methodology. Graduate studies or Master's degree. Salary Description $74,900 - $99,500

At Statco-DSI, a subsidiary of ProMach's Process business, we have a longstanding reputation in the industries we serve. We offer an extensive portfolio of integrated solutions in sanitary equipment, systems, design/build, engineering services and software to optimize processing line performance and deliver maximum uptime to our customers. As an industry leader and one of the largest sanitary process equipment distributors in North America for the dairy, food, beverage and bio-pharmaceutical industries, we have ten sales & engineering offices strategically located throughout the United States with a national network of more than 150 sanitary process professionals. Do we have your attention? Keep reading. As a Sr. Process Engineer on our team, you will oversee the sale and execution phases of large projects with customers. This will include a variety of products, even potentially in new markets and applications. Your primary focus will be to sell our customized engineered solutions by coming alongside customers to develop solutions that maximizes value, as well as profitability. Are you excited about this work? Function as a mentee of area SMEs and other Process Engineers, continuing to develop skills and competence while selling & executing large projects within the targeted industries Partner with Business Development and Regional Sales to implement strategies & tactical plans to drive growth in the target markets Develop and maintain strong relationships with industry customers to ensure a thorough understanding of their needs and expectations Prepare accurate project estimates & quotes, ensuring accuracy in alignment with customer's budget and performance expectations Develop & deliver presentations to prospective customers, highlighting the value and benefits of our services and solutions Collaborate across the team to develop project concepts, providing strategic/technical guidance and design feedback, empowering the team to handle day to day items to achieve project goals Ensure compliance with all applicable industry standards, regulations and best practices throughout each project phase Engage as a collaborative and positive member of the Engineering team; applying open communication, creativity and continuous learning What's in it for you? There's no monopoly on innovative ideas or limits to how far you can advance with our team. We offer an open, communicative environment that fosters individual initiative. We pride ourselves in being a company where people are happy and choose to build a career. In addition to growth opportunities, as a ProMach employee, you receive more than just a paycheck. The education and experience you bring to a role with us matters. Placement within our salary range is determined based upon years of directly relatable experience for your position. These components, along with local and national compensation survey data, contribute to deciding a candidate's potential starting rate of pay. Total compensation includes your pay (base salary), commission, comprehensive medical/dental/vision programs, as well as life insurance, disability insurance, paid time off programs, a retirement savings plan with a company match, and a wellness program. And because we understand the importance of feeling protected, there is no waiting period for benefits - you are eligible on your first day of employment! Base Salary Range: $120,000 - $150,000; Potential Commission Opportunity: $5,000 - $20,000 Please note that the pay ranges listed on external job boards, outside our posting details, do not accurately reflect our internal compensation ranges. If this sounds like you, we want to connect! Bachelor's degree in engineering or a related field Eight (8) or more years experience in the food & beverage industry, focused on client relations, high level designs and engineering concepts, sales (preferably sales engineering) and project management Ability (and desire to travel) to ensure the highest levels of service Proven ability to communicate, present, develop strong relationships (internally & externally), problem solve, work in a fast-paced environment, complete analysis and manage multiple projects simultaneously Track record of successfully managing large-scale projects from concept to completion independently Can demonstrate a strong understanding of target industry trends, regulations and best practices Self-motivated, driven by results, dedication to ensuring customer satisfaction and project success Commitment to teamwork and collaboration, seeking continuous improvement and growth Pro Mach, Inc. was named to the Inc. 5,000 list of the fastest growing private companies in the U.S. seven times. We continue to introduce innovative products, enter new markets, expand our global presence, and actively acquire new capabilities. We have the rewards, opportunities, and the market strength of a large organization combined with the entrepreneurial culture of a small, fast-paced company. You will enjoy the benefits of working with a growing company that competes globally with the personal touch and feel of a smaller company where you can make an impact every day. Curious about life at ProMach? Follow us on LinkedIn, Twitter, and Instagram! ProMach is an Equal Opportunity Employer. Pro Mach uses E-Verify to verify employment eligibility of all new hires to work in the United States. Pro Mach is a drug-free workplace. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. #statc #instat

* Perform and lead tasks, projects and all processes for plate ceramic plate fabrication in support of manufacturing (batching, casting, green plate fab, bake out, firing and finishing. * Focus will be on driving yields improvements and process efficiency * Instill proper data collection and statistical process control * Through expertise and the above, guide improvements to production processes * Mentor and guide other process engineers in this group * High level of collaboration with Ceramics and Process Transfer Teams, and with Front End Operations Supervisor, directed towards process improvements * Significant collaborative engagement with engineers in back end processing (such as metallization) to help ensure that process improvements are fully vetted through final product. * Provide and execute qualification plans for process improvements * Provide and execute qualification plans for new equipment * Update operators (and technicians) on procedure changes, production and quality issues * Direct, train, and transfer skills/knowledge to operator, engineers and engineering technicians * Investigate new suppliers, technologies for improving production, quality, end cost and throughput. * Evaluate impact of Preventative Maintenance on yield/quality and co-ordinate execution of P.M. schedules; evaluate all maintenance and its possible indicators of problems. * Assist Purchasing, Maintenance, and Operations to determine proper purchase/supply of spare parts, maintenance equipment, and manufacturing equipment. * Update procedures based on changes in manufacturing or engineering improvements as well as environmental issues (ISO9001, ISO14001). * Execute FMEA, SPC, MSA processes * Conduct problem troubleshooting (fishbone analysis etc). * BS or MS degree in engineering with an emphasis in materials science, ceramic, or process engineering * 5 years successful ceramic process engineering experience with a high performing passive components company (including direct experience with ceramic processes noted above). * Serve as a key subject matter expert in ceramic processing for the KCC site * Strong data management skills (data management, interpretation and SPC evaluations to guide improvements * Self-directed, highly professional and collaborative * Direct engagement with process transfer group * Strong verbal and written communication skills * Strong attention to detail and propensity for accuracy of work product * Accountability to the timelines of task completion * Able to manage multiple tasks and priorities within a fast-paced workplace * Strong problem solving skills * Experience in total quality, six sigma or other similar environments preferred. What's in it for you on Day 1: * Medical, dental and vision insurance plans * Prescription Drug Plans * Basic Life Insurance * 401k plan with company match * Tuition Reimbursement Program * Security Clearance Incentive Program * Employee Referral Program * Flex PTO and NYS Sick and Safe Leave * Paid Holidays Exciting Onsite Perks: * Free Starbucks coffee available at our café * Free access to our Fitness Center * Fresh food is available for purchase in the cafeteria store. * Employee Appreciation Events Knowles is committed to providing a competitive and fair total compensation package for all employees. One element in our total compensation package is base pay. The starting salary for this role is targeted to be between $90,000 to $125,000 annually. Individual compensation decisions are based on a number of factors, including but not limited to previous experience and skills acquired prior to joining Knowles, cost of living in the assigned work location, assigned schedule, and salaries of similarly situated peers at the company. It is to be expected that candidates will come to us with different sets of skills and experiences and therefore will be paid at different points in the stated range. We recognize that the person(s) we select for hire may be less experienced or more experienced than the role as posted; if this is the case, any updates to available salary ranges will be communicated with candidates during the recruitment process. Equal Opportunity Statement: Knowles Precision Devices prohibits pay discrimination and discrimination of any kind based on race, color, gender, national origin, age, disability, veteran status, marital status, pregnancy, gender expression or identity, sexual orientation, or other legally protected status. ITAR Statement: Please note that this position may require access to technical data controlled under the International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR). Applicants must be U.S. persons (citizens, lawful permanent residents, or individuals granted refugee or asylee status) or have the necessary authorization to access controlled technical data. Compliance with ITAR and EAR regulations is a condition of employment. Notice to Staffing Agencies, Search Firms and Recruitment Agencies: The recruitment process at Knowles is managed through the Human Resources department. Knowles does not accept resumes submitted from 3rd party agencies outside of our system. To submit resumes, 3rd party agencies will need to be a pre-approved vendor with a valid contract in place, be actively engaged by Knowles to recruit for a specific position and have agency log in credentials to submit candidates to our careers portal. Please do not submit resumes via e-mail, through our external website or directly to our employees. Any resumes submitted in this way become the property of Knowles and will not be eligible for any placement fee.

JOB TITLE: (P) Manufacturing Engineer PAY RATE: $40/hour We are a national aerospace and defense staffing agency seeking highly qualified candidates for a position with a top-tier client. Job Details: Job Type: Contract (12 months with potential for extension) Schedule: 4/9/4 (Mon-Thu: 9 hrs, Fri: 4 hrs | 7:00 AM-4:30 PM Mon-Thu, 7:00 AM-11:00 AM Fri) Industry: Aerospace / Defense / Aviation Benefits: Medical, dental, and vision (Cigna) Perks: Bonus potential + Priority access via Tier 1 supplier Openings Nationwide: Thousands of opportunities across the U.S. Qualifying Questions: Are you a U.S. person as defined under ITAR regulations? Do you meet the educational and experience requirements for this role? Can you commute to the job location or relocate if necessary? Summary: Design and improve manufacturing processes and production layouts Collaborate with cross-functional teams to drive projects and initiatives Incorporate inspection and test requirements into production planning Evaluate performance of machinery and tools; identify and implement corrective actions to ensure product quality Provide design input to engineering teams to optimize manufacturability and equipment use Ensure compliance with all relevant regulations and standards Apply Lean Manufacturing principles; Green Belt certification or knowledge preferred Requirements: Bachelor's degree in Manufacturing, Mechanical, or Industrial Engineering At least 1 year of relevant industrial experience; 2-3 years preferred Self-starter with strong initiative and teamwork skills Familiarity with Lean Manufacturing or Six Sigma principles a plus Must be a U.S. Person (as defined by ITAR). About Us: The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements. We deliver expert workforce solutions across engineering, IT, production, maintenance, and support roles. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Eligibility Requirements: Must be a U.S. Citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3) to comply with ITAR regulations. Keywords: aerospace, aviation, engineering, maintenance, aircraft design, defense Take your career to new heights-apply today!

Riverhawk Company, a leading provider of innovative engineering solutions, is currently seeking a highly motivated and experienced Continuous Improvement Engineer to join our team. As an Continuous Improvement Engineer at Riverhawk, this individual will identify and eliminate scrap, rework, and waste in our CNC manufacturing operations. This role will drive lean principles and continuous improvement throughout the shop floor, helping us achieve a "first time good" rate of 90% or better. The ideal candidate will have at least ten years of prior experience in a related role where they have been hands-on, data-driven, and passionate about making measurable impact. This person will be someone who can inspire collaboration, lead change, and promote a culture of precision and attention to detail. What You'll Do: Lead continuous improvement initiatives across CNC work centers and production processes Analyze data, identify bottlenecks, and develop actionable solutions to improve throughput and reduce costs Implement and sustain Lean tools such as 5S, Kaizen, value stream mapping, and visual management systems Drive root cause and corrective action (RCCA) processes to address quality and efficiency issues Collaborate with engineering to ensure manufacturability and cost-effective methods for new and existing parts Develop and maintain process documentation, performance metrics, and improvement dashboards Champion teamwork and employee engagement in a dynamic, fast-paced environment What We Need: The qualifications below are requirements for the Continuous Improvement Engineer role: Associate's degree in engineering or a related field required, Bachelor's degree in engineering or a related field preferred Minimum of 10 years of experience in manufacturing engineering, management, or continuous improvement Demonstrated leadership in Lean Manufacturing, 5S, Kaizen, and/or value stream mapping Six Sigma training a plus Prior manufacturing engineering or similar experience in a CNC machining environment preferred Proficiency with ERP systems for data analysis and decision-making Strong knowledge of bills of materials, routings, and process control Proven ability to implement measurable improvements that increase throughput and reduce cost Excellent analytical, problem-solving, and communication skills Skilled in Microsoft Office and comfortable presenting metrics and findings to leadership What you get: Riverhawk Company offers a competitive pay and benefit package for their employees. Below is a general outline of our package: Pay range - $70,000-95,000 annually (please note that this range will vary based upon factors including, but not limited to, prior experience, knowledge, skill and education as they relate to the position's qualifications) 96 hours of PTO and an additional 56 hours of Paid Sick Leave annually for new hires, with additional PTO added after five years of service Ten paid holidays Discretionary bonuses based on company performance Outstanding medical insurance with a company funded health reimbursement account (HRA) to cover medical bills Choice of two dental insurance options Vision insurance Immediate 100% vesting in Company 401(k) Plan with 3% Company Contribution Company paid short term disability insurance and $25,000 life insurance policy with the option to purchase long term disability insurance and additional life insurance if interested Tuition assistance and professional development opportunities Riverhawk Company is an equal opportunity employer and welcomes applicants from all backgrounds. We value diversity and inclusion in our workforce. Applicants who we wish to join our team will receive a conditional offer, pending the successful completion of a four panel drug test and a background screen.

Manufacturing Engineer II About Us: As a global manufacturer of complex aircraft engine components, Pursuit Aerospace is founded on a commitment to relentless, continuous, operational improvement and extraordinary customer service. We pride ourselves on competitive cost structure, exceptional on-time delivery, and industry-leading quality. The Pursuit family of companies has cultivated long-term relationships with our customers around the world through respect, teamwork, technology, and trust. We are driven to develop industry leading process innovations and manufacturing techniques on behalf of our customers. Our exceptional quality is driven by a deep investment in and the daily practice of continually improving our people, processes, and products. About the Opportunity: As a Manufacturing Engineer II, you will perform engineering/technical assignments using manufacturing engineering practices and principles while productionizing new programs and capital plans. Design, implement and develop solutions to manufacturing methods relating to materials, processes and tooling. Lead value stream implementation of key manufacturing programs. Location: Whitesboro, NY Responsibilities: Implements processes at the operational level, focused on developing the operation from the ability to make one part to the ability to make parts at the business model. Provides engineering support by troubleshooting problems and effecting timely solutions to maintain the continuity of production flow. Designs manufacturing processes within schedule and budgetary parameters. Monitors and debugs new methods and procedures to ensure system efficiencies. Effectively implements program capital plans. Interfaces with all manufacturing, quality and engineering folks to drive program objectives. Interfaces with technical and non-technical vendors and outside sales personnel to evaluate cost estimate and implement solutions to meet program objectives. Analyze & interpret the data on the customer blueprints to determine the best way to proceed to reach the desired outcomes. Drives team to most efficient process for product manufacture. Defines flow “rules” using TOC throughout line. Required Qualifications: A Bachelor Degree in Engineering or related discipline is required from an accredited college or university. Ten years manufacturing experience is required, Aerospace preferred. Preferred Qualifications: Ability to understand and follow Pursuit's quality system requirements Ability to meet Pursuit job requirements and customer requirements Excellent interpersonal and teamwork skills and abilities Detail oriented and excellent organization and program management qualities Work and communicate effectively with all levels of the organization Ability to multi-task Time Management skills Problem Solving Understanding customer specifications Ability to interpret reports Strong knowledge of all the aspects of production and operations Computer Skills: Microsoft Office, Thorough understanding of 3-D geometric relationships Working Conditions: Work is performed in a climate-controlled, well lit, and reasonably clean aerospace manufacturing environment. Noise levels are generally below 80 decibels. Most work is performed on the shop floor in a manufacturing environment with required PPE. Role involves standing, walking, climbing stairs, and moving around equipment during daily activities. May occasionally involve stooping, kneeling, crouching, crawling, or lifting items up to 25 pounds. Work requires use of hands and arms to handle and manipulate parts, tools, and equipment. Tasks include a blend of hands-on activities with parts, tools, and equipment, and technical work such as reviewing data and using computer-based systems. Frequent interaction and communication with production teams, supply chain, and customers in a dynamic environment. Extended periods of focus and attention to detail may be required when working on technical projects. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions. Acknowledgements: The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor. Benefits: Pursuit Aerospace also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements, among other things. Equal Opportunity Employer: Pursuit Aerospace is an Equal Opportunity Employer. We adhere to all applicable federal, state, and local laws governing nondiscrimination in employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Unison, a GE Aerospace Company, is the leading provider of differentiated engine controls, accessories, and performance monitoring solutions in the Aerospace, Defense & Space segments. Serving both original equipment manufacturers and aftermarket customers, Unison designs, manufactures and supplies the most advanced components and systems in the world. As a Manufacturing Engineer specializing in new product development, you will be directly involved in designing, optimizing, and implementing manufacturing processes for innovative products. You will collaborate with cross-functional teams to translate product designs into efficient, high-quality production methods while ensuring alignment with safety, quality, delivery, and cost (SQDC) priorities. In this role, you will be driving process improvements, troubleshooting manufacturing challenges, and contributing to the successful launch of new products. You will also be developing and refining workflows, utilizing data-driven approaches to enhance efficiency, and ensuring compliance with industry standards. **Job Description** **Roles and Responsibilities:** + Lead the development and implementation of manufacturing processes for new products and technologies from bid and proposal through hand-off to production. + Collaborate with cross-functional teams, including Design, Quality, and Supply Chain, to ensure manufacturability and quality of new products. + Develop and optimize manufacturing processes to improve efficiency, reduce costs, and ensure safety and quality. + Conduct feasibility studies and risk assessments for new manufacturing technologies and processes. + Create and maintain detailed process documentation, including work instructions, standard operating procedures (SOPs), process flow diagrams, etc. in support of Advanced Product Quality Planning (APQP). + Utilize Lean manufacturing principles to drive continuous improvement initiatives. + Provide technical support and training to manufacturing personnel. + Ensure compliance with all relevant safety and regulatory requirements. + Participate in design reviews and lead manufacturing reviews to provide feedback on manufacturability and process improvements. + Lead root cause analysis (RCA) and corrective action activities for manufacturing issues. **Required Qualifications** : + Bachelor's degree from an accredited university or college (or a high school diploma / GED with at least 4 years of experience in manufacturing) **Preferred Qualifications** : + 2+ years of experience in a Manufacturing Engineering, Process Engineering, or Industrial Engineering role + Strong understanding of manufacturing processes, quality control principles, and Lean manufacturing principles and tools such as Kaizen, Standard Work, and Hoshin Kanri + Experience with statistical process control (SPC) and root cause analysis techniques + Familiarity with CAD software, ERP systems, and Microsoft Office Suite + Strong analytical and problem-solving skills with the ability to troubleshoot and resolve technical issues + Excellent verbal and written communication skills, including the ability to effectively collaborate with cross-functional teams The base pay range for this position is $64,600 - $78,000. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on January 31, 2026. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Our award-winning client is seeking an Manufacturing Engineer to join their team! The Manufacturing Engineer will play a critical role in optimizing production processes and improving overall manufacturing efficiency. This position requires a strong technical background, problem-solving skills, and a passion for continuous improvement. The ideal candidate will be able to identify and implement innovative solutions to enhance product quality and reduce costs. Responsibilities: Identify and implement process improvements to optimize efficiency and reduce costs. Develop and maintain detailed standard work instructions for all production processes. Investigate and resolve root causes of quality issues and customer complaints using problem-solving methodologies (e.g., 8D). Design and implement tooling, fixtures, and automation solutions to improve productivity and reduce cycle times. Provide technical support to manufacturing teams, including troubleshooting equipment and training operators. Analyze production data to identify trends, bottlenecks, and opportunities for improvement. Work closely with plant management, engineering, and operations teams to achieve manufacturing goals. Required Qualifications: Bachelor's degree in Mechanical Engineering, Industrial Engineering, or a related field. 3+ years of experience in manufacturing engineering or a related field. Strong understanding of manufacturing processes, including metal cutting, forming, and welding. Proficiency in CAD software (e.g., AutoCAD) and PLC programming. Knowledge of Lean Manufacturing, Six Sigma, and other continuous improvement methodologies. Excellent problem-solving, analytical, and communication skills. Ability to work independently and as part of a team.

FOR INTERNAL USE ONLY Manufacturing Engineering Grade: LP1 EEOC Classification: Professionals FLSA Status: Exempt About Advanced Atomization Technologies Advanced Atomization Technologies (AA TECH) is a joint venture between Parker Aerospace and GE Aviation, created to produce and support advanced fuel nozzles and related products for current and future commercial engine platforms, including aerospace and aero-derivative engines. The highly skilled and experienced team of AA TECH employees is expert in design, assembly, testing, and aftermarket support, providing our customers with a world-class product and support experience. AA TECH offers a comprehensive and competitive compensation and benefits package, including: Variable Incentive Plan (Bonus Eligibility) Health, Dental, and Vision Insurance with HSA Company Contribution 401k Plan with Employer Match Tuition Reimbursement 12 Paid Holidays Vacation Accrual Position Summary: A Lead Professional 1 - Engineering is an experienced manufacturing engineer (approximately 10+ years engineering experience) with leadership aspirations that will heavily influence the technical direction of the assigned value stream. The successful candidate will be responsible for the operational excellence and success of an assigned value stream which will come from leading continuous improvement efforts, maintaining Value Stream health, and establishing strong working relationships with teammates, engineering leadership and operational leadership. Key Responsibilities: Ownership of Technical Support for assigned value stream Accountable to the High-Performance Value Stream metrics and initiatives Accountable for the execution of the Strategy Deployment initiative Process development, documentation, and support Value stream health (FTY, scrap, MDR Onset, TPM) Inventory management support (MSS, Solumina, Comp Cards) Problem Solving (RCCA, PDCA, Shainin, etc) Operational training support Ownership of Technical Compliance for assigned value stream AS13100 Support and Execution Process / Product Correlation Process Engineering Change Order process Metallurgical qualification and compliance (ES6-26 process) Returned Goods process Ownership of Technical support for Lean / Continuous Improvement Value Stream Mapping Process Capability Analysis Process Optimization Data Analysis Process Mistake Proofing (Identification and implementation) Ownership of Technical support for Environmental Health and Safety Facilitate and support the performing of ergonomic assessments on processes Facilitate, lead, and support the implementation of ergonomic improvement projects Ownership of machine safety for all equipment within the value stream Value Stream Strategy Deployment Technical Ownership of the long-term strategy Technical Ownership of short term AOP Project Identification Technical Ownership of Annual SD Project Execution Talent Development execution for team members (Mfg Eng Techs, Mfg Eng I, Mfg Eng II) Facilitation of training opportunities and direction Mentoring technical resources for assigned value stream Mentoring technical resources for the engineering team Required Qualifications: Bachelor's degree (BS) in Manufacturing Engineering or related engineering field. 10+ years engineering experience or equivalent in a manufacturing environment Basic knowledge of Profit and Loss statements for value streams Basic knowledge of manufacturing processes, principles and concepts Basic knowledge of lean principles for manufacturing Basic knowledge of quality principles for manufacturing Read and understand GD&T requirements of product drawings Understand process capability theory Familiarity with joining processes (braze, weld, etc.) CAD modeling and drafting experience Basic blueprint reading and interpretation Strong mechanical aptitude Ability to interface with multiple levels of the organization Effective communication skills: verbal and written Ability to function in a team environment Ability to use Microsoft software programs (i.e. Word, Excel, PowerPoint) Desired Qualifications: Experience leading technical teams Experience working with supply chain Minitab or equivalent stat software CREO and/or Unigraphics modeling software experience Six Sigma experience or certification Due to the Company's military contractor status, the applicant must be a U.S. citizen or a permanent resident of the United States and must provide evidence of citizenship or immigration status upon applying for the position. Advanced Atomization Technologies, LLC is an equal opportunity employer and gives consideration for employment to qualified applicants without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, or any other consideration made unlawful by federal, state or local laws. ("Minority/Female/Disability/Veteran/VEVRAA Federal Contractor”). Typical Mental and Physical Demands: While performing the duties of this job, the employee may be required to sit. The employee frequently is required to use hands to operate a computer. The employee is occasionally required to stand and walk. Specific vision abilities required by this job include close vision. Also expected of the employee is regular attendance, the ability to work cooperatively and professionally with others and members of the public, and the ability to manage multiple tasks at once. (The essential functions have been provided as examples of types of work performed by employees assigned to this job classification. The Company reserves the right to modify the work assignments and/or to make reasonable accommodations so that qualified employees can perform the essential functions of the job. The physical and mental demands described above are representative of those required to successfully perform the essential functions of this job.)

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency (“RF”) components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards (“PCB”s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at *********** Scope: TTM offers internships to qualified, ambitious Engineering students who are looking to gain professional experience in the field of engineering and manufacturing technology. Internships are designed to help build your professional credentials by actively providing meaningful, practical, on-the-job training and experiences, while also igniting your imagination.Duties : Duties will include involvement in all aspects of production, process improvement, yield improvement, as well as, various engineering product and process related projects. Perform qualification experiments and create documentation confirming results as defined by Process Engineers. Assist in data formatting and data sheet generation. Assist in failure analysis and statistical classification of failures. Essential Knowledge and Skills: Documentation. Procedure writing. Organizational, structured problem solving, and data analysis with statistics. Computer skills to include Excel, Word, Visual Basic and code writing. Good communication skills. Ability to multitask. Experience with Manufacturing Engineering Education and Experience Pursuing Bachelor's Degree in Electrical/Mechanical Technology/Manufacturing/Industrial Engineering #LI-MP1 Compensation: Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $38,537 - $60,913 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency ("RF") components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards ("PCBs"). TTM stands for time-to-market, representing how TTM's time-critical, one-stop manufacturing services enable customers to shorten the time required to develop new products and bring them to market. Additional information can be found at *********** Scope: TTM offers internships to qualified, ambitious Engineering students who are looking to gain professional experience in the field of engineering and manufacturing technology. Internships are designed to help build your professional credentials by actively providing meaningful, practical, on-the-job training and experiences, while also igniting your imagination. Duties : * Duties will include involvement in all aspects of production, process improvement, yield improvement, as well as, various engineering product and process related projects. * Perform qualification experiments and create documentation confirming results as defined by Process Engineers. * Assist in data formatting and data sheet generation. * Assist in failure analysis and statistical classification of failures. Essential Knowledge and Skills: * Documentation. * Procedure writing. * Organizational, structured problem solving, and data analysis with statistics. * Computer skills to include Excel, Word, Visual Basic and code writing. * Good communication skills. * Ability to multitask. * Experience with Manufacturing Engineering Education and Experience * Pursuing Bachelor's Degree in Electrical/Mechanical Technology/Manufacturing/Industrial Engineering #LI-MP1 Compensation: Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $38,537 - $60,913 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

Full-time Description Continuous Improvement Engineer Reports To: Director of Plant Engineering FLSA Status: Exempt Job Grade: 9 Pay Range: $94,000-$134,000 The Continuous Improvement (CI) Engineer is responsible for identifying, analyzing, and driving the reduction of process losses and inefficiencies across all production areas. This role combines data-driven engineering with Lean Six Sigma methodologies to optimize performance, reduce waste, enhance quality, and improve overall operational reliability. The CI Engineer partners cross-functionally to design and implement sustainable systems that promote continuous learning, process discipline, and long-term cost savings. Key Responsibilities Process Loss Reduction & Data Analysis Lead data collection, analysis, and model development to identify and quantify losses throughout the facility (mass balance, product yields, line efficiencies, downtime, waste, etc.). Partner with Finance to ensure accurate accounting and financial impact of losses. Design, implement, and maintain tracking systems and dashboards for product loss, scrap, and process performance data. Lead root cause analysis and corrective/preventive action plans to eliminate recurring losses. Conduct daily and weekly loss reviews; communicate trends and recommend improvements. Continuous Improvement Leadership Lead and support site-wide CI initiatives across safety, quality, productivity, and cost optimization. Apply Lean Six Sigma and structured problem-solving techniques to identify and eliminate process waste. Develop and coach standard work, time studies, cycle time optimization, SMED, and line balance analysis. Establish and sustain daily management systems, tiered meetings, and KPI routines to reinforce accountability and performance improvement. Act as a change agent by coaching and mentoring operations, maintenance, and quality teams to build CI capability. Systems, Process & Equipment Optimization Collaborate with engineering, production, and maintenance to ensure systems (CIP, fillers, processing, filtration, etc.) are optimized to minimize product and utility losses. Verify that high-solids streams are properly managed and that drain losses are minimized. Support implementation of automation and digital transformation projects. Train and mentor employees on continuous improvement principles. Support initiatives in energy and water consumption reduction. Recommend and support process control improvements through updates to procedures, drawings, and automation logic (experience with CAD, SolidWorks, or PLCs a plus). Lead implementation of new CI and operational excellence workflows, tools, and performance routines. Cross-Functional Collaboration Partner closely with Quality, Finance, Engineering, and Production to align improvement priorities with business goals. Support and facilitate kaizen events and project-based initiatives focused on yield improvement and waste reduction. Communicate progress, lessons learned, and success stories to foster a culture of engagement and continuous learning. Skills & Qualifications Required Bachelor's Degree in Engineering (Chemical, Mechanical, Industrial, or related technical discipline). 3+ years of experience in food, beverage, or chemical process manufacturing. Proven track record of leading cross-functional projects focused on process optimization and waste reduction. Strong analytical, statistical, and problem-solving skills; data-driven mindset. Develop, track, and report key production metrics (OEE, yield, downtime, rework, etc.). Working knowledge of process flow, fluid mass balance, and manufacturing systems. Excellent interpersonal, communication, and presentation skills. Demonstrated ability to manage multiple projects and priorities in a fast-paced environment. Strong financial acumen to translate process improvements into measurable business impact. Proficiency in Excel, Power BI, and process mapping tools (Visio, Minitab, etc.) Experience with ERP and production data systems. Skills & Qualifications Preferred Lean Six Sigma Green or Black Belt certification. Experience in aseptic/dairy processing including UHT, homogenization, separation, filtration, and CIP systems. Familiarity with updating P&IDs and mechanical/electrical drawings (CAD/SolidWorks). Working understanding of PLC logic and automated control systems. Prior experience implementing daily management systems or operational excellence frameworks. Passion for sustainability, waste reduction, and continuous improvement. Physical Requirements: · Ability to navigate all areas of the facility, including office spaces, warehouse areas, and the exterior perimeter. · Must wear required personal protective equipment (PPE) as necessary to safely perform job duties. · Ability to stand, sit, and carry out tasks throughout a full shift, with appropriate meal breaks. · Physically capable of standing, bending, stooping, kneeling, reaching, twisting, lifting, pushing, pulling, climbing, balancing, and crouching as needed. · Able to lift and move items weighing up to 50 pounds independently and heavier objects with reasonable accommodations. · Visual acuity sufficient to perform job duties accurately. · Capable of assessing weights, judging distances, and working at various heights. Work Schedule: Typically, Monday-Friday 7am-4pm with flexibility to support a 24/7/365 operation as needs arise. Compensation: At Cayuga Milk Ingredients, we value a fair and comprehensive approach to compensation. Our wage range for this role is determined by various factors, including skill sets, experience, training, licensure, certifications, and organizational needs. It is not typical for an employee to start at or near the top of the range for the position. Compensation decisions are made based on individual job circumstances considering skill level, previous experience, and education requirements. Equal Opportunity Employer: Cayuga Milk Ingredients is committed to providing equal employment opportunities to all employees and applicants without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all aspects of employment, including recruitment, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Non-Discrimination Policy: The contractor will not discriminate against employees or applicants for discussing or disclosing their own pay or the pay of others. However, employees with access to compensation information as part of their job duties are prohibited from disclosing this information to unauthorized individuals, except in specific circumstances outlined by applicable laws and regulations (41 CFR 60-1.35(c)). General Statement: All Cayuga employees recognize that the success and prosperity of the company is everyone's responsibility. All employees are expected to treat each other in a positive, respectful, and professional manner, to be at work for their assigned shift and to work safely as a team. Employees must be self-starters who can relate to all levels of the organization. Disclaimer: o All requirements are subject to possible modification to reasonably accommodate individuals with disabilities. o This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor. o The company reserves the right to add to or revise an employee's job duties at any time at its sole discretion. o This document does not create an employment contract, implied or otherwise, other than an “at will” employment relationship. Salary Description $94,000 - $134,000

Are you ready to see your future take flight? At GE Aerospace, we believe the world works better when it flies. We are a world-leading provider of jet engines, components, and integrated systems for commercial and military aircraft. We have a relentless dedication to the future of safe and more sustainable flight and believe in our talented people to make it happen. Job Description Job Summary Help invent the future of flight, lift people up, and bring them home safely as a GE Aerospace intern! The Manufacturing Engineering internship offers a distinct role based on your major and field of interest: Manufacturing Engineering Internship: In this role you will build a strong technical foundation in manufacturing and assembly processes. This may include key manufacturing, new product integration, new technology integration, continuous improvement, and cost out. This internship is a great first step for those interested in our MEDP or OMLP program after graduation. Essential Responsibilities Our Manufacturing and Supply Chain organizations combine passionate people, cutting-edge technology, and a culture of continuous improvement to provide the highest quality products to our customers. Members of our team are part of a fast-paced and dynamic environment. They typically have the benefit of getting hands-on experience with our products. In either internship experience, you'll be expected to: * Learn and understand state-of-the-art methods of manufacturing, * Support manufacturing and repair processes for component hardware and/or overall engine assembly, * Maintain high-quality standards via risk assessment, root cause analysis, corrective action, and the application of statistical controls * Ensure safe work conditions via Environmental, Health & Safety (EHS) initiatives * Learn and apply Lean and Six Sigma principles to drive productivity, on-time delivery, process capability, and stable operations in our increasingly complex and demanding environment * Supporting delivery efforts for sourced components by working with our shops and suppliers while building project management skills, negotiation skills, and business acumen Qualifications/Requirements: * Minimum 3.0 cumulative G.P.A. on a 4.0 scale without rounding * Attending a full-time registered and nationally accredited bachelor or graduate program (accepted majors are listed below) * Willingness and ability to work in any of the 35+ GE Aerospace U.S. locations * Reliable transportation, as many of our sites do not have public transportation available Degrees accepted: * Aeronautical/Aerospace Engineering * Ceramic Engineering * Chemical Engineering * Civil Engineering * Computer Engineering * Computer Science * Electrical Engineering / Electrical & Computer Engineering * Engineering Technology (various) * Fiber/Polymer Science * Industrial Engineering * Manufacturing Engineering * Materials Science/Engineering * Mechanical Engineering * Systems Engineering * Welding Engineering Or any relevant or similar major to the ones above Eligibility Requirements: Any offer of employment is conditioned upon the successful completion of a background investigation and drug screen. Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. Desired characteristics: * Humble: respectful, receptive, agile, eager to learn * Transparent: shares critical information, speaks with honesty, contributes constructively * Focused: quick learner, strategically prioritizes work, committed, and takes initiative * Leadership ability: strong communicator, decision-maker, collaborative teamwork * Problem solver: analytical-minded, challenges existing processes, critical thinker * Comfortable working in a fast-paced shop floor environment around various machine tools and equipment * Preference will be given to those with prior internship, co-op or military experience in manufacturing/supply chain or engineering * Demonstrated commitment to community and/or university involvement Benefits: Pay rates for this position begin at $20/hour and increase for each undergraduate year completed. Relocation support and housing assistance is available for those who relocate to a new city. Equal Opportunity Employer: GE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at *********** Scope: TTM offers internships to qualified, ambitious Engineering students who are looking to gain professional experience in the field of engineering and manufacturing technology. Internships are designed to help build your professional credentials by actively providing meaningful, practical, on-the-job training and experiences, while also igniting your imagination. Duties : * Duties will include involvement in all aspects of production, process improvement, yield improvement, as well as, various engineering product and process related projects. * Perform qualification experiments and create documentation confirming results as defined by Process Engineers. * Assist in data formatting and data sheet generation. * Assist in failure analysis and statistical classification of failures. Essential Knowledge and Skills: * Documentation. * Procedure writing. * Organizational, structured problem solving, and data analysis with statistics. * Computer skills to include Excel, Word, Visual Basic and code writing. * Good communication skills. * Ability to multitask. * Experience with Manufacturing Engineering Education and Experience * Pursuing Bachelor's Degree in Electrical/Mechanical Technology/Manufacturing/Industrial Engineering #LI-MP1 Compensation: Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $38,537 - $60,913 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency (“RF”) components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards (“PCBs”). TTM stands for time-to-market, representing how TTM's time-critical, one-stop manufacturing services enable customers to shorten the time required to develop new products and bring them to market. Additional information can be found at *********** Scope: TTM offers internships to qualified, ambitious Engineering students who are looking to gain professional experience in the field of engineering and manufacturing technology. Internships are designed to help build your professional credentials by actively providing meaningful, practical, on-the-job training and experiences, while also igniting your imagination.Duties : Duties will include involvement in all aspects of production, process improvement, yield improvement, as well as, various engineering product and process related projects. Perform qualification experiments and create documentation confirming results as defined by Process Engineers. Assist in data formatting and data sheet generation. Assist in failure analysis and statistical classification of failures. Essential Knowledge and Skills: Documentation. Procedure writing. Organizational, structured problem solving, and data analysis with statistics. Computer skills to include Excel, Word, Visual Basic and code writing. Good communication skills. Ability to multitask. Experience with Manufacturing Engineering Education and Experience Pursuing Bachelor's Degree in Electrical/Mechanical Technology/Manufacturing/Industrial Engineering #LI-MP1 Compensation: Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $38,537 - $60,913 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

Are you ready to see your future take flight? At GE Aerospace, we believe the world works better when it flies. We are a world-leading provider of jet engines, components, and integrated systems for commercial and military aircraft. We have a relentless dedication to the future of safe and more sustainable flight and believe in our talented people to make it happen. **Job Description** Job Summary Help invent the future of flight, lift people up, and bring them home safely as a GE Aerospace intern! The Manufacturing Engineering internship offers a distinct role based on your major and field of interest: **Manufacturing Engineering Internship:** In this role you will build a strong technical foundation in manufacturing and assembly processes. This may include key manufacturing, new product integration, new technology integration, continuous improvement, and cost out. This internship is a great first step for those interested in our MEDP or OMLP program after graduation. Essential Responsibilities Our Manufacturing and Supply Chain organizations combine passionate people, cutting-edge technology, and a culture of continuous improvement to provide the highest quality products to our customers. Members of our team are part of a fast-paced and dynamic environment. They typically have the benefit of getting hands-on experience with our products. In either internship experience, you'll be expected to: + Learn and understand state-of-the-art methods of manufacturing, + Support manufacturing and repair processes for component hardware and/or overall engine assembly, + Maintain high-quality standards via risk assessment, root cause analysis, corrective action, and the application of statistical controls + Ensure safe work conditions via Environmental, Health & Safety (EHS) initiatives + Learn and apply Lean and Six Sigma principles to drive productivity, on-time delivery, process capability, and stable operations in our increasingly complex and demanding environment + Supporting delivery efforts for sourced components by working with our shops and suppliers while building project management skills, negotiation skills, and business acumen Qualifications/Requirements: + Minimum 3.0 cumulative G.P.A. on a 4.0 scale without rounding + Attending a full-time registered and nationally accredited bachelor or graduate program (accepted majors are listed below) + Willingness and ability to work in any of the 35+ GE Aerospace U.S. locations + Reliable transportation, as many of our sites do not have public transportation available Degrees accepted: + Aeronautical/Aerospace Engineering + Ceramic Engineering + Chemical Engineering + Civil Engineering + Computer Engineering + Computer Science + Electrical Engineering / Electrical & Computer Engineering + Engineering Technology (various) + Fiber/Polymer Science + Industrial Engineering + Manufacturing Engineering + Materials Science/Engineering + Mechanical Engineering + Systems Engineering + Welding Engineering Or any relevant or similar major to the ones above Eligibility Requirements: Any offer of employment is conditioned upon the successful completion of a background investigation and drug screen. Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. Desired characteristics: + Humble: respectful, receptive, agile, eager to learn + Transparent: shares critical information, speaks with honesty, contributes constructively + Focused: quick learner, strategically prioritizes work, committed, and takes initiative + Leadership ability: strong communicator, decision-maker, collaborative teamwork + Problem solver: analytical-minded, challenges existing processes, critical thinker + Comfortable working in a fast-paced shop floor environment around various machine tools and equipment + Preference will be given to those with prior internship, co-op or military experience in manufacturing/supply chain or engineering + Demonstrated commitment to community and/or university involvement Benefits: Pay rates for this position begin at $20/hour and increase for each undergraduate year completed. Relocation support and housing assistance is available for those who relocate to a new city. Equal Opportunity Employer: _GE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is an_ Equal Opportunity Employer (******************************************************************************************************************************************************** _._ _Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law._ _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.