Top 50 Process Technician Skills

high Demand

• Prepare certifications of analysis for material handlers and process technicians
• Process Technician III Operated extrusion machines as well as multiple types of forklifts, saws and grinders to meet production goals.
• Process Technician on a cross-trained team in the Synthesis area on the plant where the process of iron oxide production begins.
• Process Tech - Quality control inspection, testing and repair newly manufactured printed circuit boards at the component level.
• Started my career in plastics as an operator and worked my way up to process tech and Supervisor.

• Process technician, Cycle in mold change start ups to make quality approved parts.
• Served as a mentor/provide training and work direction to Process Technician I.
• Lead other process technicians, maintenance personnel and OEM representatives as required.
• Process Tech Set-up and operation of equipment in molding department.
• Assist Jr Process Technicians with machine operations and set ups.

• Process tech, mold set up start up process.
• Started as a third shift process tech.
• Process Technician in Photo/Fib/STEM fab.
• Process technician on 2nd shift.
• Contracted to LUCENT TECHNOLOGIES Fabrication and test Process Technician, Assembly and test of mobile CDMA telecommunication base station equipment

• Process Technician Provided operational, maintenance, technical and process support for the production lines.
• Process Technician- Review Start up schedule with supervisor.
• worked my way into a 2nd shift lead of process techs.
• job AtGEIama Process Technician for Blade Dynamics where I work with fiberglass, epoxy, bondo, infusions and chemical hazards.
• purchased from Dow Chemical) * Process Technician hired to train all new Process Technicians and operating staff.

Show More

high Demand

• Progressed from operator to set-up operator.
• Check mold set-up sheet for verification and correctly load mold program from corresponding run sheet or memory file.
• Assist machine operators with machine set-ups, product hookups, washouts, change overs, roll changes.
• Developed a program to optimize injection machine set-up times, color system set-up, plastic scrap rates.
• Work closely with the Process Engineering team for process enhancements, troubleshooting, set-up and improvement.

• Performed all tasks and duties required in change over, cleaning, and set-up effectively.
• Mold Setter=Mold Set-ups, make sure waterlines are properly set and water is flowing freely.
• Authored standardized machine master set-up and trouble shooting guides for use by all processors.
• Establish robot set-ups and programs, work on grinders on electrical or mechanical issues.
• Mold set-up, processing, and troubleshooting of new and in process molds.

• Verify set-up after die change by running the first parts produced.
• Supervised machine set-up, start-up, continuing and shut down operations.
• Trained and supervised new technicians in set-up and material handling.
• Track waster, set-up time, downtime and up time.
• Multi-tasked with responsibility for rolling loan set-up pipeline.

• Mold Changer / Set-Up Technician Set up and removed molds on 38 injection machines.
• Operated, set-up Jones Cartoner Machine for aerosol production runs.
• mold set-up, and machine maintenance.
• Interviewed and trained new hires for machine set-up positions - Scheduler duties - MRP Controller.
• Learned how to set-up and troubleshoot Branson and Dukane Ultra-Sonic welders.

Show More

high Demand

• Input data entry, and conduct daily performance Maintenance and qualifications on machinery and chemical manufacturing processors.
• Managed sterile inventory by data entry and ensured standard operating procedures were followed by employees.
• Light computer processing and data entry for medical information filing
• Perform data entry and operate the computer programs associated with component production, labeling, storage, and shipping.
• Maintain material inventories sufficient, performed data entry and statistical control charts and data.

• Verified checks with invoices and submitted to team leader for data entry processing.
• Create and maintain spreadsheets, data entry and other office-related letters.
• Performed equipment calibration, data entry and completion of lot travelers.
• Performed high volume of data entry of customer account payments.
• Performed data entry, cataloging, and inventory.

• Performed data entry of medical claims.
• Provided support to Epitaxy with incoming wafer inspection procedures such as data entry and performing Surf Scans on incoming wafers.
• Job duties include such functions as matching patient information, data entry, aliquoting, and scanning documents.
• Manage data entry progress and results in MES Final Inspect module and clean to ensure proper function.
• Performed inspections and Data entry, maintenances/servicing the tools.

• Restructure and update the data entry..
• Position entailed clerical and data entry consisting of Patient demographics Handled specimen intake and identify problems with specimen types Researched missing information
• Performed data entry and maintained collection and library databases; Digitized collections utilizing Adobe Photoshop to create TIFF and JPEG images;
• Scan packages Accomplishments Improved on data entry , flexilogg, centrifuge use my Skills Used Current job
• Trained according to cGMP and SOP Data entry Process in excess of 2,000 units per month

Show More

high Demand

• Maintain pollution abatement process equipment, including equipment upgrades for better process control.
• Implement operation of process equipment and execution of validation protocols.
• Qualified for both forklift operation and process equipment maintenance.
• Operate equipment such as centrifugal pumps, manual and automatic valves, elevators, and various other pieces of process equipment.
• Established, implemented, maintained and upgraded process equipment and systems to prevent any unscheduled down time.

• Experience with process equipment, the operations of, removing from/returning to service, and troubleshooting.
• Take off and put online various pieces of process equipment to ensure continuous operation process environment.
• Check process equipment for leaks and do corrections on the spot if needed.
• Performed Lock Out/Tag Out on electrical and process equipment for maintenance repairs.
• Maintained wet process equipment, troubleshoot and solve machine malfunctions.

• Monitored, calibrated, and repaired process equipment.
• Assisted in troubleshooting on all process equipment.
• Perform daily manufacturing operations in a cGMP environment, including operation of process equipment and execution of validation protocols and other assignments
• Completed daily operational checklists of process equipment and cleanroom particle counts.
• Sustained engineering and process equipment in Photolithography and Etch area.

• Certified in different process equipments like SCEPTER, BAKE, RITE TRACK.
• Acted as supplemental support on ASM Epi process equipment.
• Set up and cleaned process equipments.
• Operated and field checked process equipment Involvement in sustaining a lean manufacturing atmosphere by completing the appropriate training.
• Perform plant master sanitation schedules Perform general labor tasks Operate and monitor various process equipment 1.

Show More

high Demand

• Controlled and analyzed semi-conductor production processes in a clean room environment.
• Manufactured biologically derived medical devices in a clean room environment.
• Trained manufacturing technicians how to etch on these different types of equipment and inspect microelectronic components in a clean room environment.
• Work in the Yellow clean room environment, Exposed PCB board using Auto scan lamination develops PCB using CLS.
• Worked in a clean room environment with 10k & 100k ppm security levels (research & development).

• Maintained records and Clean Room environment to comply with Regulatory Requirements, GMP's and SOP's.
• Operated and monitored clean room environment using ultra-high vacuum exhaust stations to process Night Vision Intensifier tubes.
• Worked in wafer fabrication and clean room environment, requiring clean room gowning.
• Work in semi-conductor manufacturing, in clean room environment, processing silicon wafers.
• Graft and medical device production in a sterile, clean room environment.

• Worked in a clean room environment at a semiconductor wafer fabrication plant.
• Maintained clean room environment and guidelines for the production of medical parts.
• Experience using clean bench and autoclaves in a clean room environment.
• Performed all operations inside of a clean room environment.
• Trained in a clean room environment.

• Worked in clean room environment.
• Trained in the processing and manufacturing of Hewlett Packard printer inkjet cartridges in a semi-clean room environment.
• Operated the Vicell machine and worked in clean room environment.
• Processed computer at robotics station Quality Control of microchips in clean room environment Monitor robotics aspects of chip manufacture
• Manufactured clinical drug substance with GMPs and SOPs in a Clean Room environment.

Show More

high Demand

• Coordinate between supervisor and inside operator to carryout different job tasks and manage turnaround planning support.
• Process orders change/identifies misidentified lab samples and problem samples for shift supervisor.
• Maintained active inmate files and served as liaison to the court system and other Law Enforcement Agencies.
• Directed activities to ensure that workmanship and testing conformed to ISO and QS9001 specifications per customer requirements.
• Cleaned, isolated, and performed lockout/tag out and atmospheric testing on equipment for maintenance.

• Perform Field Service training at MADISON CMP, Inc. facility in Salem, New Hampshire.
• Created new work instructions for FMS and Motor Grader to comply with ISO guidelines.
• Covered for shift supervisor during their absence and preformed both duties during the shift.
• Mentored and provided training to technicians, supervisors, and equipment technicians.
• Shift supervisor of 10 to 15 employees.

• Communicate with supervisors on all shifts.
• Support TS-16949 and ISO-14001 initiatives.
• Assisted Supervisor in evaluating performance of operators, including providing feedback for annual performance evaluations.
• Optimized manufacture of Chalcogenide glass optic preforms in an ISO certified environment
• Completed applications and scheduled appointments for Rehab Advisors.

• back up supervisor, troubleshooting, inventory
• Provided quality recommendations to supervisor and managers, which were well, received the majority of the time.
• Prepared correspondence for Rehab Advisors and completed necessary paperwork for contractors to bid on jobs.
• Provide production, progress, or changeover reports to shift supervisors.
• Document all production and production losses Responsible for maintaining ISO standards Visit customer sites and performs quality control.

Show More

high Demand

• Developed and implemented Statistical Process Control system to optimize inventory and quality levels of pilot plant raw materials.
• Identified probable causes for abnormalities resulting in loss product and monitored statistics process controls and tool calibrations.
• Increased productivity by seven percent by implementing process controls to reduce waste in a laboratory.
• Provided operational management using Statistical Process Control using databases and spreadsheets.
• Implement proactive process controls to reduce non-conforming product occurrences.

• Perform daily process control and secondary equipment operational checks.
• Supervised associates training on daily process control activities.
• Sample products, perform test, record data, carry out statistical process control on process operations, and write production logs
• Identify and drive improvements in defect density, equipment output, and process control.
• Salt Spray Corrosion testing, and Process Control & Product Inspection of paint line.

• Process control of fixed bed catalyst reaction through the distillation of acrylic acid.
• Performed quality inspection and transferred data to process control database (SQC).
• Maintained and updated process control logs.
• Maintain a Statistical Process Control.
• Analyzed data using statistical process control Assisted Engineering with special projects.

• Process control for temperature pressure, level and flow utilizing Fisher Rosemount and Emerson Process controls.
• Utilize Delta-V and Rosemount computer programs, for process control automation.
• Keep statistical data and implement SPC (Statistical Process Control).
• Evaluate performance of multiple toolsets utilizing statistical process control charts, response flow checklists to proactively identify marginal toolsets.
• Shift Supervisor Create shift assignments Troubleshooting process related issues Material handling Process Control audits Mold sets Daily reporting using I.Q.M.S

Show More

high Demand

• Provided information to customers, other departments, and management as a Customer Service Representative.
• Recognize for high-quality work, organizational strengths and exceptional customer service delivery.
• Supervised front-end cashiers in order to deliver premier customer service.
• Completed Picture Perfect Customer Service Training.
• Experience with ISO 9000, Inventory Control, Lean Manufacturing, Shipping, Customer Service and Engineering Support.

• Tracked customer service issues, provided updated status, and ensured accurate escalation for unresolved issues.
• Monitored quality processes required by QS9000 Standards for Customer Service, Design, and Tooling Management.
• Assist management with production schedules, equipment preventative schedule, and customer service.
• Offered excellent customer service in all aspects of bonding within the Jail.
• Answer phones, customer service issues and gives directions to the facility.

• Answered incoming calls regarding invoices, while providing outstanding customer service.
• Provided excellent customer service to families and helped them with translation.
• Prepared reports for customer service on the status of their order.
• Trained new employees on specialized machinery and customer service policies.
• Worked with corporate customer services to investigate and resolve problems.

• Provided customer service support throughout the hospital.
• File customer service requests using JIRA.
• Provided extensive customer service assisting residents and contractors submitting building permits, issued over-the-counter permits, and greeted and directed visitors.
• Reconciled payments to balancing reports to ensure accurate crediting of customer service accounts.
• Group won a corporate award for "Legendary Customer Service".

Show More

high Demand

• Performed quality control checks and assisted with maintaining customers' requirements according to specifications.
• Performed advanced quality control checks to ensure product adherence to specifications.
• Perform quality control checks on product during the production process in order to ensure that product specifications and standards are met.
• Completed weekly cycle counts, managed departmental budget of 750K, and completed product quality assurance and quality control checks.
• Perform quality control checks and help maintain customer requirements according to specifications by bottle types and various dimensions.

• Completed quality control checks on products during the production process in order to prepare products for shipping.
• Perform quality control checks on all products before they are boxed and shipped to the customers.
• Perform quality control checks on material before and during operation of machines.
• Perform quality control checks and formulate a change if necessary.
• Perform in process and final quality control checks and components.

• Operate, maintain and perform quality control checks on equipment.
• Performed quality control checks that included visual defects and dimensions.
• Performed quality control checks on products during the production process.
• Performed quality control checks of medical equipment, products.
• Perform quality control checks on medical equipment;.

• Perform Quality Control checks of all equipment.
• Performed quality control checks on incoming books.
• Performed hourly quality control checks.
• Performed quality control checks to ensure the customers satisfaction was accomplished.
• Worked in blow molding department processing pre-forms into bottles, performed quality control checks and worked with high speed labelers.

Show More

average Demand

• Performed weekly process qualifications and updated SPC charts accordingly.
• Monitor process parameters by following SPC, Spec, and Out of Control Action Plan (OCAP) procedures.
• Monitored and analyzed problems using SPC and other techniques to identify and implement corrective actions and new product launches.
• Responded to SPC violations making adjustments to recipes as need to keep the processes in control.
• Experienced with Statistical process control, SPC Charting of various processes.

• Prepared reports, charts and analyzing SPC data.
• Monitored SPC charts and making adjustments as needed.
• Managed testing protocol according to SPC principles.
• Perform periodic in-line quality testing, SPC.
• Identify and address process gaps using SPC.

• Monitor and control processes through SPC.
• Helped maintain and monitor RealSPC database.
• Experience in clean room protocol, ISO, SOP, GOP, and SPC.
• Worked with SVG spinner, SPC charts and MESA.
• Insert all data and 3sigma in SPC, Prime.

• Executed engineering tests of dimensional uncertainty analysis using Statistical Process Control (SPC).
• Monitored performance of metrology equipment through weekly SPC.
• Documented production using MES tracking system, and recording metrology and quality data using computer aided SPC systems.
• Supported and assisted engineering, and manufacturing WIP by monitoring holds and SPC charts.
• Performed experiments, metrology and SPC for thin film systems for demo.

Show More

average Demand

• Supervised operators on the line and ensured following of company policy and guidelines of SQF's and GMP's.
• Performed duties using PM's, SOP's, calibration/work order systems, including writing/modifying in accordance with GMP.
• Demonstrate a clear understanding of regulatory requirements and of GMP standards through compliance of the company quality policy.
• Supported process development, GMP production, process characterization, and validation of phase III clinical drug candidate.
• Review and complete GMP documentation before submission to QA, including batch record and deviation reports.

• Process area lead technician in a GMP clean room, pharmaceutical manufacturing plant.
• Maintain cleanliness of equipment through GMP and HACCP established sanitation in-house practices.
• Trained in and closely followed GMP standards for all processes.
• Certified new hire personnel for GMP operations.
• Review of production and packaging records for completeness and cGMP compliance, calculation accuracy for predetermined standards.

• Revised existing SOPs and Work Instructions (WI) for GMP manufacturing.
• Operated and maintained chemical reactors in Pilot Plant according to cGMP.
• Operated packaging equipment in accordance to cGMP and SOP company regulations.
• Uphold the GMP (good manufacturing practice) Backup lead.
• Experienced with aseptic processing, cGMP, SOP.

• Have a firm understanding of the company's goals, cGMP's and SOP's.
• Comply with SOPs, HS&E regulations and GMP guidelines.
• Have a clear understanding of GMPs (Good Manufacturing Processes) and SOPs (Standard Operating Procedures).
• Maintain the area of accountability according to cGMP, SOPs, company policies and pharmaceutical standards.
• Familiarized with company's' cGMP's, SOP's and objectives.

Show More

average Demand

• Supervised the process through computer-aided controls to insure quality production of Roundup herbicide and various related intermediate products.
• Understand the importance of reading and following specifications to ensure a quality product and customer satisfaction.
• Followed operation procedures to produce a quality product.
• Conduct floor audits to ensure the proper ingredients and procedures are followed to provide a quality product.
• Monitored all equipment and systems; and made adjustments in order to safely produce quality products.

• Guaranteed customers received the highest quality products by performing a wide variety of quality tests.
• Take leadership to move team members where they fit best to produce a quality product.
• Operate plant equipment and process control systems in order to produce in specification quality products.
• Focus on producing superior quality product under time restraints while minimizing downtime and waste.
• Run quality production (visual inspection, weigh and gauge product).

• Start and maintain an optimal process for a quality product.
• Changed materials for cost savings and better quality product.
• Expedite high quality product using a variety of machines.
• Maintain proper documentation ensuring products meet spec drawing specifications and production of a quality product in a timely manner.
• Assisted production and development engineers in process optimization and stabilization providing consistent, repetitive quality product yield.

• Set up the operation of the blow molder extruders and presses and related equipment to produce a quality product.
• Key Results: Identified tooling and process issues that would result in more production of better quality product.
• Participated in daily production meetings,In order to insure quality products delivered in a timely manner
• Company relocated to mid west states) Duties include, functioning as a processing mechanic and inspector for quality production.
• Key Accomlishments Produced quality products in a timely manner.

Show More

average Demand

• Worked in a strong team environment under aseptic conditions while performing controlled production processes.
• Provided skilled support for production processes for three separate departments within the manufacturing environment.
• Monitored production processes in manufacturing facilities such as chemical or pharmaceutical manufacturing plants.
• Maintain & inspect the production processes to latest released engineering specifications.
• Monitored and adjusted production processes or equipment for quality and productivity.

• Evaluated production processes and equipment to find opportunities for improvement.
• Ensured designated parameters and quality during production process.
• Maintain operating specifications for production processes and equipment.
• Implement production processes with continuous improvement.
• Develop more efficient production processes.

• Design, fabrication, and implementation of tools, equipment, and fixtures for production process line.
• Keep constant communication with the other areas of the production floor to maintain a smooth production process.
• Forecast quantity and type of manufacturing materials, including resins, used in the production process.
• Performed production process as a certified operation the following tool sets: M-39 AMAT COMPASS.
• Coordinate the design and implementation of new production process and improve existing process.

• Team Coordinator, Duties include maintaining the production process throughout the line.
• Work safe and efficient operation in production process.
• Updated racking system and streamlined production process.
• Monitored the production processes and adjusted schedules.
• Trained 12 process and lab technicians on the acrylamide production process.

Show More

average Demand

• Followed Clean-Room Protocol, Quality/Safety Standards, and OSHA Regulations
• Complied with patient information confidentiality standards and CAL-OSHA regulations.
• Follow all HSE and OSHA policies and procedures and maintains confidentiality of all personnel, donor and center information.
• Followed laboratory policies and procedures in compliance with OSHA and appropriate state and federal regulations.
• Prepare reports for employees, ensuring full compliance with OSHA and FDA requirements and regulations.

• Participated in creating policies and procedures to ensure the work environment strictly followed OSHA guidelines.
• Obtained knowledge of OSHA and EPA standards to perform job safely and with in compliance
• Operated all equipment safely and in accordance with Frito-Lay and OSHA safety regulations.
• Encouraged OSHA seminars for key team members in order to successfully pass inspections.
• Wear proper PPE as needed and comply with OSHA regulation.

• Fill out all necessary paperwork to follow OSHA regulations.
• Work safely in accordance with OSHA Regulations.
• SAP trained, certified OSHA forklift driver.
• Understand and practice safe OSHA standards.
• Adhered to strict protocols, procedures and regulations (GLP, OSHA, HIPPA, CLIA)

• Served as member of Hazmat team for hazardous chemical spills, ensuring compliance with OSHA and regulatory agencies.
• Participated on team to help the Fayetteville plant obtain North Carolina OSHA's first STAR re-certification.
• Follow cGMP and OSHA safety regulations.
• Adhered to the provisions of FDA, OSHA, GMP, MPs, ISO 9001, and ISO 14001.
• Operated computerized equipment on log line * Thorough knowledge of OSHA standards * Responsible for maintenance and troubleshooting for my area

Show More

average Demand

• Spearheaded inspection and packaging equipment for pharmaceutical products per FDA regulations to achieve production goals ahead of schedule.
• Provided requested information/knowledge regarding Formulation Area to FDA Auditors.
• Involved with the manufacturing of buffers and media to support the manufacturing of FDA regulated products in a biotechnology environment.
• Analyzed Whole Blood & Serum Samples, Audit Test Facility for proper FDA Regulations & Standard Operation of Procedures
• Performed data entry of samples while maintaining patient privacy while adhering to FDA and HIPAA laws.

• Processed plasma sample in an FDA approved manner, while maintaining a clean work environment.
• Carry out and document improvements within FDA compliant electronic documentation system (KNEAT).
• Work in a highly regulated environment; ISO, AATB and FDA.
• Weigh and mix solid medicine components according to FDA/GMP process guidelines.
• Supervised all lab functions according to FDA rules and regulations.

• Train new employee's on FDA clean-room procedures and safety.
• Schedule production based on customer demands and FDA guidelines.
• Manufactured and assembled test samples for FDA inspection.
• Ensured compliance with AATB and FDA regulations.
• Performed daily cleanup to meet FDA requirements.

• Adhered to FDA, DEA and CGM practices.
• Team Collaboration was required to efficiently meet quota and Strong documentation required for FDA adherence.
• Maintained familiarity and compliance with FDA, OSHA, CLIA, cGMP, and internal company procedures.
• Trained on 21CFR Part 11.Formulated 1L-600L solutions using and cGMP ethics in an FDA approved pharmaceutical manufacturing plant.
• Managed therapeutic cell processing in accordance with cGMP/cGTP and FDA regulations.

Show More

average Demand

• Analyzed and interpreted statistical process control data and recommended corrective action to maintain process controls at Six Sigma level.
• Communicated with Product Engineers of component and process failure analysis and recommended corrective action with daily production reports.
• Provided resolution of customer complaints, including data collection, resolution initiatives, and corrective actions.
• Investigate manufacturing process problems for assignable root cause and provide corrective actions.
• Identify process deviations and perform root cause/corrective action.

• Evaluated performance of process equipment to ensure product quality and provide input to the mechanical staff for corrective actions.
• Monitor operations of assigned areas, maintain equipment and detect abnormalities and take safe corrective action.
• Recorded department conditions on a checklist and followed-up with corrective action if problems were found.
• Determined necessary corrective actions needed to repair hardware, software, and peripheral equipment issues.
• Be part of root cause analysis of processing issues and recommend corrective actions.

• Identify root cause in process problems and assist in directing corrective action.
• Provided ideas and corrective actions for ongoing manufactured at all times.
• Provide ideas and corrective actions for ongoing manufacturing issues.
• Document all production downtime and record corrective action.
• Investigated scrap issues, and implemented corrective actions.

• Documented corrective action changes on RJG controls.
• Determined necessary corrective action needed to repair electrical and/or mechanical problems on industrial machines and tools.
• Analyzed high-level problems and took corrective action across functional areas for a problem resolution.
• Discussed inspection results with those responsible for products and recommended corrective actions.
• Develop, recommend and implement corrective actions to improve scrap and efficiencies.

Show More

average Demand

• Monitor all operations of chemical process to assure safe chemical procedures, quality standards and compliance with regulatory requirements.
• Compiled and evaluated statistical data to ensure effective productivity and quality standards are met.
• Initiated engineering changes and process/product deviations in order to comply with quality standards.
• Perform simple to complex machine adjustments to meet product quality standards/specifications.
• Comply with government timeliness and quality standards.

• Performed project work that included mechanical and electrical upgrades to improve machine run times while maintaining high product quality standards.
• Manage projects and programs with appropriate internal and external support to ensure the quality standards of the products.
• Worked with teams in a consulting role (problem solving, quality standards and production).
• Checked quality standards both visually and using gauge pins, calipers, and part specific gauges.
• Maintain fast accurate service ensuring that all products are 100% consistent with company quality standards.

• Verify that processes are running to Master Condition Sheet and within quality standards.
• Inspect finished product to insure quality standards are met and maintained.
• Oversee final customer product meets and exceeds quality standards.
• Adhere to all company policies and procedures maintain quality standards
• Tested product to insure quality standards were meet.

• Estimated costs and set quality standards.
• Schedule machines and operators for production needs, Process machines to hold customer specs and quality standards, mold changes.
• Tested and certified production units with [ ] boards for military use ensuring compliance with HP's quality standards.
• Uphold and audit the quality standards of ISO [ ] and AS9100C.
• Interact with Maximo to maintain equipment to cGMP and quality standards.

Show More

average Demand

• Established processed for injection molding machinery, auxiliary equipment, and all support equipment.
• Monitored auxiliary equipment and made minor repairs to tooling and machinery.
• Verified correct set-up on molding machines and auxiliary equipment.
• Repaired and maintained machines and auxiliary equipment.
• Maintained and operated auxiliary equipment.

• Supported all other departments in maintenance, troubleshooting and repair of presses, molds, auxiliary equipment and robots when requested.
• Set up, processing and trouble killing a cell of twenty five injection molding machines and all related auxiliary equipment.
• Perform job changeover by removing and storing tool and auxiliary equipment to prepare machine for next production run.
• Mold set-ups and tear downs, ensuring proper auxiliary equipment at presses and in good working condition.
• Set up, start, and troubleshoot all auxiliary equipment including leak detectors and trimmers.

• Mold changes start up and shut down of presses and all auxiliary equipment.
• Performed troubleshooting, maintenance, and repair on machines and auxiliary equipment.
• Assist process engineers for new and existing tooling or auxiliary equipment issues.
• Maintain in operational conditions, disassemble, assemble and clean auxiliary equipment.
• Hook up auxiliary equipment according to mold specs.

• Maintain outside Extruder process and Auxiliary equipment.
• Trained on troubleshooting all auxiliary equipment used for packing parts such as Panduit cable, tie machines and automated labeling systems.
• Start up and processing of injection molding machines Preventive maintenance on the machines and auxiliary equipment.
• Coordinate with field operators on when to startup or shutdown reactors and other auxiliary equipment.
• Performed maintenance on presses, extruders and auxiliary equipment.

Show More

average Demand

• Performed product manufacturing tasks on assembly line and performed duties within required standards and safety regulations.
• Conducted quality assurance inspection of assembly line products.
• Conducted quality control inspections on assembly lines.
• Performed scheduled preventive maintenance on assembly lines.
• Perform torque tests for tools used on the assembly lines and check torque values on hardware being installed on assembled equipment.

• Changed the calculation on each operation in the assembly line, for example changed the time of the pressing machine.
• Machine Adjustments, die changes, paperwork for 17 presses 1 assembly line.
• Stacked trays after bottles are finished coming off the assembly line.
• Created new layouts of assembly lines and new kitting procedures.
• Transport quality parts to assembly lines and to warehouse.

• Provided assembly lines with documentation, tooling and instruction.
• Process and assemble parts on a moving assembly line.
• Provide off shift supervisor role for assembly lines Assures assembly lines meet all SQDC targets while respecting all associates.
• Plant Closed) Worked on assembly line doing several jobs in the process of building trucks.
• Processed automation assembly lines, robot cells, conveyor designs, E.O.A.T, vision equipment.

• Work on every stage of the Lucent's BTS assembly line.
• Traveled to Elizabethtown Kentucky to work with a Team of others collecting uptime / downtime status across four different assembly lines.
• Green country staffing) Responsibilities: Assembly line work, application of lower lining on inside of busses.
• Prepare assembly line -Prep & start paper work -Make sure team have PPE -Work on assembly line
• Worked assembly line of ele ctronics department of Controls Gathered base information to implement Kanban process on inventory.

Show More

average Demand

• Board operator for liquid phase exothermic reactors and numerous distillation columns.
• Design testing phantoms for intravenous cardiac ultrasound imaging transducers.
• Verified and disseminated press releases with physicians.
• Interpreted and entered orders for specialty medications, including dose calculations, drug quantities, allergies and patient demographics.
• Communicated daily with physician offices, insurance companies and other health care professionals to assist in patient care.

• Responded to phone requests from doctors to add tests to patients charts, operated advanced machinery.
• Respond to user inquires over the phone and face to face.
• Answered phone calls and assisted the public.
• Received the Pi Kappa Alpha S.L.A.G.
• Phase 2 in RCCS Cell Plant.

• Performed liquid and gas chromatography.
• Assigned Missouri identification numbers, collections, phone duties (inbound and outbound calls), onsite business visits (compliance)
• Manage Operation units encompassing Lubes Extraction Unit, De-asphalting Unit, Lubes Tank Farm, and Lube Extraction 2 Unit.
• Averaged 25 claims over the phone a day Researched insurance policy to determine the applicable coverage for each claim.
• Talked to clients over the phone to resolve issues with misinformation Cataloged and transported specimens to corresponding labs.

• Scheduled first dose orders and delivery via Scriptmed pharmacy software.
• involved in all phases of HDPE Plastic Recycling.
• Phase 4 complete in RCCS Inoculate, RCCS Refeed, and EM processes.
• Maintained patient records Translator - Translated medical consultations between physicians and patients.
• Experience with all columns; Cellufine Sulfate, Butyl Sepharose, Q and SP.

Show More

average Demand

• Set up and operate production equipment in accordance with current good manufacturing practices and standard operating procedures.
• Performed routine production functions necessary to operate the production equipment to meet customer specifications.
• Assisted in engineering calculations and measurements in support production equipment.
• Maintained production equipment to ensure proper working order.
• Performed preventive maintenance to the production equipment.

• Conducted routine maintenance on production equipment.
• Maintain production equipment and machinery.
• Set up, changed over, and operated production equipment in accordance to standard operating procedure.
• Audit product quality and make production equipment adjustments as needed to maintain SPC compliance.
• Insure proper operation of all in-line production equipment to comply with companies SOP's.

• Established SOP's and instructed operators on the safety and use of production equipment.
• Operate appropriate production equipment as needed for coat, expose and develop processing.
• Set up and operate production equipment in accordance with policies and procedures.
• Collect data and maintain logs on all aspects of production equipment.
• Inspected production equipment for safety and maintenance issues.

• Clean production equipment or work areas.
• Selected, and debugged production equipment.
• Operate and maintain production equipment.
• Provide emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service.
• change overs of production lines, answer calls to production floor, PM's of production equipment.

Show More

average Demand

• Experience with all stages of the process from equipment set up to ensuring all buffers and filters are in the suite.
• Trained on the Suite CIP and SIP systems and have become familiar with the LIMS system for delivery of samples.
• Collaborated with co-workers with regards to troubleshooting, glass wash, ordering supplies and interacting with Production Support.
• Work with product engineers to help resolve any issues related to prototype parts.
• Read work orders and examine negatives and film in order to determine machine.

• Address questions and concerns from callers and forward to appropriate staff or department.
• Provide input and support to gross margin improvement and cost reduction initiatives.
• Removed completed wafer from equipment, and place film in labeled containers.
• Translated to reproduce documents, questions and speeches from English to Spanish.
• Check in patient and informs other clinical staff of patient arrival.

• Ensured Proper Analysis for Repair of Equipment and Lock Out/Tag Out Protocol
• Put together part kits to satisfy program build requirements.
• Involved with Purification Process of rh-BMP-2.
• Experience in Suite A/B Production Support.
• Worked there for three months.

• Loaded/unloaded films into x-ray machine - Continuously trained with x-ray equipment for proper and safe handling.
• Coordinated Problem Solving (R&D) with Engineers and Chemists 9.
• Started with Suite E/F startup operation.
• Piece Room & Bulk Area 2.
• Conduct routine care of the operating equipment to maximise equipment reliability and minimise the need for plant maintenance.

Show More

average Demand

• Provided support to plant operations by assuring on time in-process testing results (HPLC, GC, KF, IR).
• Operate and troubleshoot PLC controlled equipment used in mass production of CRT's (picture tube).
• Set up and PLC program automated and semi-automated injection molding machines for cell phone cover.
• Used HPLC, GC along with wet chemistry techniques such as TLC to analyze samples
• Understand the principles of PLC, hydraulic, pneumatic, mechanical and electrical systems.

• Used and understood the newest PLC programming and Window Viewer computer software.
• Collected, prepared and analyzed the samples using HPLC.
• Monitor and adjust PLC's as required.
• Prepared and help run QC samples, GC, HPLC and % solids.
• Worked SO DIMM, DIMM, HPT, PLCC, PGA assembly.

• Trouble shooting Allen Bradley PLC'S.
• Trained in the operation of pneumatic, hydraulic and PLC controlled robotic arms, conveyors, activators, lifters and pushers.
• Operated Twin-screw extruder using PLC programs as well as standard tools to adjust production runs.
• Control or operate chemical processes or systems of machines, using PLCs.
• Experienced in the use of PLC control and troubleshooting with RSLogix.

• Maintained and operated Honeywell 3000 DNC and PLCs on all equipment.
• Program plc hardware with use of Allen Bradley software.
• Used HPLC for immunoassay testing and protocol development.
• Install, maintain, and program PLC equipment (Allen Bradley).
• Experience with installing, maintaining, trouble-shooting, and minor programming of Allen-Bradley SLC500 and Modicon PLCs.

Show More

average Demand

• Review packaging and manufacturing Batch Records.
• Perform daily cleanings and complete all paperwork applicable to batch records, daily, weekly, and monthly cleaning logs.
• Prepare production documents, such as standard operating procedures, manufacturing batch records, inventory reports, or productivity reports.
• Manufactured humanized antibodies for clinical trials, and applied technical writing skills to SOP's and Batch Records.
• Performed critical measurements and weights for production needs as stated in the Manufacturing Batch Records.

• Review completed production documentation (batch records, log books, etc.)
• Complete all applicable paperwork associated with batch records and equipment cleaning logs.
• Review of Batch Records: written and SAP electronics mode.
• Review in-process test results and production batch records for completeness.
• Produced batches according to batch records and standard operating procedures.

• Reviewed Manufacturing Batch Records, reducing errors by 25%.
• Performed calculations as stated in the Manufacturing Batch Records.
• Maintain complete and accurate equipment logs and batch records.
• Complete batch records for both organic and non-organic products.
• Documented critical information on batch records per SOP.

• Maintained and controlled Batch Records.
• Maintained accurate batch records and sanitization logs.
• Reviewed and dispositioned Batch Records.
• Matched batch records to the lot number barcode labels for packaging and shipping.
• Key documentation included batch records, SLRs, and electronic equipment logbooks.

Show More

low Demand

• Operated Process Control computer system or manually operated systems to monitor and control all systems.
• Worked second full-time position serving international manufacturer of computers and computer systems.
• Gather data from various tools and tooling systems and document quality issues into computer system and flag defect for repair.
• Participate on test teams to evaluate the effectiveness of form revision and computer system changes for assigned areas.
• Worked in a manufacturing environment, Used computer systems to start up and run new processes.

• Obtained hands on training for the computer systems of MES, Delta-V, and Pass-X.
• Reported and repaired any adverse conditions into the SAP Computer systems every hour as issues occurred
• Trained to operate the plant by the DCS computer system (Delta V).
• Maintained and controlled machinery on two work lines using an internal computer system.
• Programmed and monitored reactors then reviewed and input test results into computer system.

• Utilized PTS computer system (Parts Tracking System) to receive/ship parts.
• Assisted in training employees throughout the region on new computer system.
• Enter test and client information into the computer system.
• Utilized M3 to maintain and track product through computer system
• Transfer information from paperwork into the computer system.

• Used a computer system to pay out donors.
• Advanced user of SAP, PAS-X MES, LIMS, HanDEL, DeltaV, and PLC computer systems.
• Operated OIT computer systems such as Delta V to execute ,and monitor batches within production environment.
• Complete daily paperwork and enter information on the companies computer system.
• Process plasma units Enter information into DMS computer system Record times that plasma sits out of freezer

Show More

low Demand

• Operate valves and dials of 500 ton machines to regulate pressure, temperature, speed and feed rates and cycle times.
• Analyzed and improved production machine cycle times by 9 percent while reducing waste by 14 percent.
• Verify cycle times, mold numbers, on each machine and record data into log sheet.
• Created and implemented improvement of job cycle times against standard work measurement standards.
• Worked to refine established process programs to improve cycle times and minimize scrap.

• Monitor cycle times and process out defects in parts as needed.
• Helped monitor productivity by tracking yields and equipment cycle times.
• Conduct mold changes; Material Changes and monitor Cycle times.
• Monitored cycle times for performance and assisted in line changeovers.
• Trouble shooting production for better cycle times and quality.

• Verified cycle times and made regular quality checks.
• Improved processes to reduce cycle times and scrap.
• Monitor cycle times and part quality.
• Decreased bending programs cycle times.
• Make recommendations to quality and engineering departments on ways to reduce scrap and improve cycle times.

• Machine operator- duties include operating presses to produce quality parts while mantaining cycle times.
• Adjust of processes Make continuous improvements in cycle times and opportunity area.
• Developed and improved takt / cycle times that improved efficiencies.
• Help "Process Engineer" improve batch cycle times and keep 5s areas clean.
• Mold changes Accomplishments Increasing cycle times Skills Used Knowledge of processing

Show More

low Demand

• Maintain equipment cleanliness and perform basic trouble shooting
• Operated Acrylic Acid unit * Day to day operations, trouble shooting, issue permits for maintenance and repairs while monitoring progress
• Assist team members in trouble shooting and repairs of the production equipment to reduce down time that could affect yield.
• Set up, start up, trouble shooting for injection molding machines ranging from 80 to 1800 ton.
• Color changes, mold changes, trouble shooting, sampling new molds, processing and press calls.

• Help performed process and equipment technicians with tool adjustments and trouble shooting.
• Provide technical support to shift for trouble shooting and problem resolution.
• Trouble shooting of any probes that may occur during shift.
• Perform trouble shooting and preventive maintenance to minimize machine downtime.
• Performed trouble shooting on production equipment as desired.

• Trouble shooting and remediation of issues in suite.
• Trouble shooting and debugging all new processes.
• Responded promptly trouble shooting all quality issues.
• Preform trouble shooting tasks on site equipment.
• Trouble shooting and repair of Equipment.

• Second Shift Supervisor and process on injection molding machines,trouble shooting any issues.
• Start ups and trouble shooting for Engel and Haitian molding machines.
• Job duties included startup and shut down of molding machines, mold changes, and process trouble shooting.
• Position required trouble shooting, startups, and setting process parameters for close tolerance trigger sprayer parts.
• Process building and refining Trouble shooting Mold installation and removal Communicate events of the night through reports

Show More

low Demand

• Experienced in operating a DCS console (ABB & Mod 5) to monitor and control process units.
• Trained on a DCS system which controlled the newer high pressure melamine production unit, M-2.
• Board operator on Honeywell DCS, SCADA, and Fuels Manager systems since 2005.
• Operated the DCS console and ensured that desired rates and parameters were met.
• Operate Fisher DCS System to produce nylon polymer in a continuous production environment.

• Experience and knowledge with the operation of the SAP and DCS systems.
• Initiate and execute product and buffer transfer using DCS and HMI.
• Monitor the DCS board, making adjustments as needed.
• Monitor process and coordinate with DCS board operator.
• Monitored Cameras and DCS equipment.

• Repair, maintain and install the PLC controls, DCS controls.
• Control Hydrocracker to engineering specifications using Delta V DCS.
• Monitor and adjust parameters in reactors to maximize yield during fermentation process using DCS programs such as Delta-V and Provox.
• Lead Operator/ Senior Control Room Operator (DCS-Honeywell TDC 3000) Monitor and sample multiple Reactors.
• Trained on crude oil degassing process Trained and certified on Delta-V DCS operation

• Have knowledge and have worked with DCS control panels.
• Experience in operating DCS and Univox systems.
• Use PLCs, DCS and Automated networks.
• Use troubleshooting skills to resolve process related deviations and problems Initiate and participate in Root Cause Investigations as required Use DCS system
• Operate DCS, write procedures Perform lockouts for maintenance/operation tasks Commission systems for startup Member of safety committee and ERT

Show More

low Demand

• Monitor biological and chemical wash solution to ensure quality and consistency for instruments and medical equipment.
• Adjust computer controlled equipment to ensure quality production.
• Adjust process parameters to ensure quality product production.
• Managed the processing of 60 samples per hour for microscopic evaluation to ensure quality control and processing integrity.
• Will set-up, operate, load, and monitor specialized equipment to ensure quality product is produced.

• Calibrate equipment to ensure quality production, using computer or touch panel interface.
• Take samples of products daily to ensure quality, made batches of caustic.
• Operated 18 consecutive machines to ensure quality and safe products were produced.
• Work closely with Quality department to ensure quality parts are produced.
• Control Coating by monitoring operating ranges to ensure quality parts.

• Make offsets as needed to ensure quality of parts.
• Tested outgoing products to ensure quality standards were met.
• Adjusted machines & programs to ensure quality product.
• Maintained all machinery involved in the molding process including repairs,adjustments,and modifications to ensure quality and productivity.
• Calibrate or adjust equipment to ensure quality production using tools Utilize RJG decoupled molding/scientific molding.

• Required to set up molds, troubleshoot, and repair equipment to ensure quality products.
• Performed cleaning of production tanks after use to ensure quality of products.
• Apply standards, processes and procedures to ensure quality 4.
• Inspected and measured fiber to ensure quality Testing the strength of various fibers Measuring various fibers on multiple machines for production.
• Trouble shooting Aurburg Injection Molding machines and Yushin Robotics to ensure quality parts with tolerance of flash better than 0.005".

Show More

low Demand

• Repaired, serviced, and lubricated tools and equipment, using hand tools, spray gun, or pressurized spray can.
• Applied machining and welding skills necessary to fabricate or modify parts as well as the usage of basic hand tools.
• Dismantled devices to access and remove defective parts, using hoists, cranes, hand tools and power tools.
• Use proper PPE to correctly and safely use a variety of hand tools to carry out job duties.
• Installed dies in presses for production purposes according to work order specifications using a variety of hand tools.

• Worked with many hand tools and measuring equipment to work out the sequence of the machine.
• Removed finished and cured product from dies and mold, using hand tools and air hose.
• Preformed duties of changing molds through overhead crane, forklift and using various hand tools.
• Set new tool in press using various hand tools such as ratchets and impact wrench.
• Repaired and maintained machines and auxiliary equipment, using hand tools and power tools.

• Monitored equipment and used various hand tools to take action and troubleshoot system errors.
• Assembled circuit boards using through hole technology, press fit, and hand tools.
• Open crates and other containers using hand tools to unpack items received.
• Positioned and secured mold on bed of machine, using hand tools.
• Connect water hoses to cooling systems of dies, using hand tools.

• Used hand tools, power tools, precision measuring instruments and pullers.
• Maintain and repair equipment using hand tools.
• Repaired process equipment using hand tools.
• Hand tools of all sorts.
• Assemble parts using bolts, screws, speed clips, rivets and other fasteners utilizing hand tools.

Show More

low Demand

• Assisted the production supervisor in daily production activities giving technical support to problems and eliminating downtime.
• Provide technical support for operating plants, pipelines and other engineering organization.
• Provided technical support to the lab by receiving and processing requisitions/specimen.
• Provided technical support to internal and external customers regarding software issues.
• Provide technical support and training to assembly and manufacturing personnel.

• Provided technical support for internal customers who requested information.
• Provided technical support for troubleshooting and problem resolution.
• Provided materials, labor, and technical support while balancing schedules and project workloads to ensure completion dates.
• Provide primary production and technical support to the SMT manufacturing floor from incoming inspection through pack and ship.
• Provide manufacturing and technical support for the engineering community, maintenance, tooling, management and production.

• Assisted technical support personnel in troubleshooting and resolving technical issues related to software and hardware issues.
• Provided end-user technical support via telephone, managed used equipment sales and other tasks as requested.
• Provide technical support to management team and department colleagues on specific systems and/or processing issues.
• Provided technical support and training for production operators, removing human error from processes.
• Assisted the technical support group with our customers needs for technical support.

• Managed call flow and responded to technical support needs of customers.
• Provide PC technical support for Verizon residential and apt community dwellers.
• Provide technical support or assistance to chemists or engineers.
• Provided technical support on a wide range of equipment from small laboratory equipment up to 10,000 L Bioreactor process skids.
• Provided electrical and mechanical technical support for the Keithley ATE test system.

Show More

low Demand

• Created and managed machining (CNC and manual) and assembly processes for multiple lines of parts and internal/external gear pumps.
• Set up and operated various CNC lathes and mills to cut cast iron parts within blueprint specifications and tolerances.
• Programmed CNC software to run all kinds of jet engine parts through water jet process.
• Designed new end stops on CNC benders to reduce down time and operator error.
• Complied with preventive maintenance on robot, CNC software, and water jets.

• Operated, maintained and troubleshooted CNC and manual machining equipment.
• Qualified to operate vertical and horizontal CNC machines.
• Direct production support with CNC machines.
• Operated CNC machines and robotic welders.
• improved CNC machine programs, machine repair, maximum parts output, set-organized-purchased all tooling for Cincinnati and Harding machines

• Lead Operator of CNC machines including heat treating, drills, grinders, honers and final inspection gages.
• Work with bandsaws, CNC machines, and other equipment.
• Fix maintain and improve programs on cnc and robot programs
• Programmed CNC wire benders Performed maintenance and quality duties
• Operated various punch presses, drill presses, brake presses, laser presses, cnc, lathe presses, various inspection.

• Work on and fix the cnc machine that I was running.
• Trained to run CNCs, manual and chevy lathe, ban saws, and assembly of all automated machines we design.
• Installed, performed startup, programming, and operation of Asymtek CNC solder paste dispensing system.
• Worked with 5 axis CNC Routers(Thermwood/DMC Contollers).
• Operate CNC machines using Fanuc and Siemen controls.

Show More

low Demand

• Conduct QA testing in metallurgical laboratory to ensure product meets customer specifications.
• Designed and commissioned a custom zone control system based on customer specifications.
• Utilized computer daily for meeting customer specifications, and creating internal documentation.
• Checked products to ensure product quality; meeting customer specifications.
• Inspected finished products for quality and adherence to customer specifications.

• Process inspection capabilities according to customer specifications.
• Assured product complied with customer specifications.
• Review Customer Specifications for special processes.
• Read customer blueprints and work with Engineering to make a process for production to build an assembly according to customer specifications.
• Supported and troubleshot the measurement and strength testing machines for fiber optics to ensure adherence to customer specifications.

• Inspect and test machined and fabricated parts for defects, wear and deviations from customer specifications.
• Take Data readings of specific process conditions to maintain product at or exceed customer specifications.
• Adjust the process of an injection molding machine to produce quality parts to customer specifications.
• Maintained good team concepts to meet customer specifications and worked to achieve plant goals.
• Process film for government agencies and aerial surveying companies, per customer specifications.

• Insure start-up presses are compliant with quality control and customer specifications.
• Test parts and make sure that they meet customer specifications.
• Maintained product production to meet customer specifications and time lines.
• Draw and nest complex steel parts per customer specifications.
• Store all products per customer specifications.

Show More

low Demand

• Performed technical and demanding problem solving duties particular to SMT manufacturing processes and quality issues.
• Communicate to quality about corrective action taken to correct quality issues.
• Investigated customer complaints or quality issues and resolved all within parameters.
• Facilitated and problem-solved quality issues and implemented process improvements.
• Serve as Shift Supervisor, providing support to production lines for quality issues that arise on a day to day basis.

• Handled all raw-material quality issues Technical point of contact for vendors, Recognized as voice for company.
• Work closely with quality and tooling departments to help resolve any quality issues.
• Coordinated with multiple levels of management to resolve quality issues.
• Be able to resolve most normal blow molding production/quality issues.
• Gathered, organized, and evaluated data for quality issues.

• Create release documents for incoming raw materials with quality issues.
• Drive technical quality issues to the engineering department.
• Make necessary process controls to fix quality issues.
• Address and resolve quality issues with vendors.
• Respond to and correct quality issues.

• Communicate quality issues and complete discrepancy documentation as required in a timely manner.
• Assist Production team with production and quality issues.kuka robot experience.
• Gathered samples hourly from presses, diecutters, folder-gluers, and windowing machines to test and check for printing quality issues.
• Perform M/C startups and color change startups, also troubleshot any quality issues.
• help supervisor to achieve company production goals.Help in any maintenance repairs - Talk to packers about any quality issues.

Show More

low Demand

• Stripped portable and reactor vessels of removable components and attached vessels to a DeltaV controlled 3-station clean-in-place decontamination platform.
• Trained, directed and empowered new staff to ensure they were equipped to thrive in their role towards achieving departmental goals.
• Reviewed and processed all incoming documents and performed system update on AS400 & Meet production daily standard per upper management.
• Shipped parts which include: Inspecting, boxing, weighing, labeling and entering into SAP.
• Weighed out, prepped and made batches of product based on production schedules.

• Polish mold Class A surfaces to insure acceptable appearance as necessary.
• Referred callers to investigators if cases appeared to require an autopsy.
• Wear appropriate PPE in accordance to the task being performed.
• Processed and shipped these specimens over to main hospital lab.
• Load the hopper with the correct weight of chemicals.

• Filled hoppers with tobacco for blending process Followed processing requirements for adding appropriate mixtures of tobacco for mixture.
• Processed and received bottled plasma Shipped out bottled plasma
• support related issues Attend weekly meetings with upper management to discuss growth and progress in product support relations.
• Follow company policies and procedures regarding all PPE that is required for the product/job.
• Order Writing/Customer Service * Receive orders shipped in from customers.

• Use machinery to etch different runs, such as (plasma etching, steppers, furnace and lamb 1, etc.
• Maintained the programming on Karl Suss Aligners, Ultratech Steppers, SVG developers, and SVG coaters.
• Operated stacker & strapper to stack & strap pallets.
• Modified tool programs( TEL track, ASML scanner, Cannon stepper, Nikon overlay, CSEM and Leica.
• Work Equipment: Preform Hopper Denest Cap Hopper Packers(Douglas) Filler Wrapper Palletizer BlowMold Inspection equipment

Show More

low Demand

• Meet the quality and quantity production and distribute goals established by the QA and R@D departments.
• Provided additional QC coverage, and overall culture change of center for improvement to existing QA systems.
• Report QAIM incidents, Safety concerns, and HIPAA violations upon discovery.
• Ensured all boxes were resealed prior to being removed from QA area.
• Complete paperwork and remove test parts from the machine for QA.

• Performed QA on the product before sending it out to customer.
• Process and run good quality products and QA, specks.
• Coordinated and communicated with QA for parts being within spec.
• Perform daily, weekly, and monthly QA.
• Perform QA and QC on all processed slides.

• Conduct QA inspections on produced material.
• Submit 1st piece to QC/QA.
• Perform finished product analytical requirements and obtain QA approval.
• Perform QA Inspection of product for flaws and defects that are unacceptable for customers and suggest alternate uses for the product.
• Assist QA inspectors during line de-con and sterilization of all surface instruments prior to sign-off approval.

• Operated plot scale lamination process for R & D. QA testing - viscosity, transmittance.
• Executed a QA approved rework protocol for unlabeled lyophilized drug product vials.
• CAREER RELATED SKILLS/ATTRIBUTES ERP systems (SAP, IQMS, QAD).
• Performed final QA inspection of Photolithography reticules and masks.
• Led a cross-functional team of engineers, QAs and UX designers to develop features and fix product defects.

Show More

low Demand

• Coordinated engineering experiments, designed experiments, issued process changes and documented all processes specifications.
• Collaborated with engineers to implement process changes to enhance productivity.
• Implemented process changes, both temporary and permanent, according to engineering specifications to decrease cycle time or to increase yields.
• Operated production tools, monitored the process using SPC techniques and made process changes to stay within targeted limits.
• Communicate to management all process changes, improvements or concerns that arise verbally and by written report.

• Assisted Device and Process Engineering to implement process changes, improve yields and new process development.
• Performed quality checks and made process changes as needed to meet production and quality standards.
• Aided in Suite changeover including the evaluation of recommended process changes & Suite validation.
• Perform scheduled preventive maintenance; implement process changes; maintain autoclave equipment.
• Initiated process changes to improve the customer's acceptance rate.

• Developed and implemented process changes on the production line.
• Conduct training on process changes with all manufacturing staff.
• Execute mold, material and process changes as needed.
• Document all process changes and update process documentation.
• Maintained documentation files for all process changes.

• Implement process changes and coordinate process experiments.
• Follow and engage in PHA, LOPA, PSSR, and MOC process changes.
• Process changes to insurance policies such as Lien and Maintain accurate personal and departmental logs.
• Maintained proper chemical inventories Made sound and logical judgments regarding process changes.
• Mold installation, color change and process changes Mold cleaning Trained others in operations

Show More

low Demand

• Developed production tracking and quality control systems, analyzing production, maintenance, and other operational reports to detect production problems.
• Monitored and performed necessary setting adjustments, repairs and control systems for safe efficient processing.
• Controlled, monitored and made adjustments on control systems and manually operated equipment.
• Tested and maintained computer-related industrial electronic control systems and electrical components.
• Instituted control systems, such as hair nets and gloves, to reduce the particle count and improve production pass rate.

• Adjusted pumping systems, chemical feeders, auxiliary equipment, control systems storage tank levels and pump stations indicators.
• Qualified for inside board operations, 3 different control systems MODV Operator Stations, Honeywell TDC-2000, ABB.
• Monitor process conditions, equipment and control systems and makes adjustments as necessary.
• Control, monitoring and adjustment of all control systems and manually operated equipment.
• Record readings and make adjustments on Delta-V control systems to maximize quality control.

• Gained extensive knowledge of Piping and Instrumentation Diagrams and Digital Control Systems.
• Worked with the Honeywell TDC 3000 DOW MOD/5 computerized control systems.
• Supervised 6 employees in data entry and quality control systems.
• Interpreted data from remote control systems and made adjustments accordingly.
• Monitored process conditions, equipment, and control systems.

• Operate process equipment using Delta V process control systems.
• Experience with FactoryLink and DeltaV PLC control systems.
• Monitored and maintained bioreactors and automated control systems.
• Controlled pressure of pipelines via control board Operated process related equipment and plant process control systems.
• Operate Column reactor's and process control systems.

Show More

low Demand

• Adhere to company policies and practices from the Quality Management System based on Company/regulatory standards for tissue processing.
• Prepared 50% of all units and samples for regular daily and weekly shipments per company policies and strict federal regulations.
• Maintain the highest quality and fastest cycle on all machines at all times Follow all company policies and procedures.
• Assisted in the training of new employees, ensuring the understanding of company policies and procedures were met
• Adhere to general safety rules, manufacturing procedures, company policies and procedures and other ISO regulations.

• Process, Inventory, and Stock plasma samples according to FDA guidelines and company policies.
• Maintain a clean production area and complied with the company policies and safety regulations.
• Trained agents and their staff on new company policies and computer entry.
• Conform to, support, and enforce all company policies and procedures
• Help clean and maintain clean room per company policies.

• Participate in BBI programs and follow all company policies.
• Adhere to all company policies and operational procedures.
• Adhere to all safety guidelines and company policies.
• Followed all company policies and procedures.
• Enforce all Safety and Company Policies.

• Follow Company policies and procedures.Warehouse Shipping and Receiving: Assist with implementing new computer system.
• Job Duties- Make sure production needs are being met and associates are maintaining production needs and following company policies.
• Help Foreman to supervise and maintain production and oversee Fellow associates in maintaining company policies.

Show More

low Demand

• Monitored equipment and process parameters, and took corrective action accordingly to maintain process control.
• Developed and established manufacturing process parameters utilizing established and innovative molding techniques.
• Determined process parameters of various tools identifying problems and addressing them accordingly.
• Monitored quality data and adjusted process parameters to achieve product specifications.
• Developed process parameters for liquid and pellet color additives.

• Monitored process parameters which ensured compliance with FDA requirements.
• Verified process parameters and made adjustments as necessary.
• Maintain process parameters within specified limits.
• Test and adjust process parameters, such as zoning temperature and forming holding time to optimize the forming processes.
• Insure jobs are running within UCC process parameters, work instructions are followed, and parts meet customer specifications.

• Monitor process parameters during part run and take appropriate proactive action to maintain the specified SPC limits.
• Process parameters in molding machines and make necessary changes to provide a quality product.
• Maintained a record of process parameters and ensured smooth process flow 5.
• Monitor machines cycle time, process parameters and assist in maintaining them.
• Conduct start-up testing of mold operation and process parameters.

• Check all process parameters of the machines and equipment.
• Recorded daily process parameters and cycle time checks.
• Changed process parameters, when appropriate.
• Established process parameters for placement programs and reflow furnace profiles.
• Develop and maintain best possible injection molding process parameters.

Show More

low Demand

• Worked in temperatures below zero when organizing plasma samples, and carried boxes as heavy as 50lbs.
• Monitor freezer and refrigerator temperature to ensure the quality and integrity of the plasma samples and units.
• Follow universal precautions and use sterile technique to collect and ship plasma samples and units.
• Utilized expertise to collect plasma samples and transfer to storage facilities while ensuring quality control.
• Process and prepare plasma samples for shipment to an outside laboratory for further analysis.

• Collected plasma samples and segregated plasma units to freezer to ensure product quality.
• Performed shipment preparation procedures, packaging, and shipment of donor plasma samples.
• Test plasma samples for health and safety risk.
• Reconciled plasma samples and bottles.
• Ship plasma samples daily and plasma units bi weekly.AccomplishmentsI'm now the safety representative for the entire center.

• Prepare,Process, label, and pack plasma samples.
• collect, and store plasma samples.
• Screened and processed donors -Collected plasma samples -Loaded and unloaded product shipments
• Ship plasma samples to Qualtex, Hutton, NGi for various testing, including titer and viral testing.
• Retrieve blood samples Set up/disconnect pcs2 machines Leadership Customer Service Retrieve plasma samples/laboratory work

Show More

low Demand

• Perform a number of different duties which include; changing of mold, plates, color changes, and material changes.
• Focused on color changes, tool changes, process improvements, cell layouts, employee training improvements,
• Color changes, machine start up / shut down, processing and troubleshooting.
• Consulted mechanics for major issues and assisted with color changes and changeovers.
• Perform color changes and mold changes on injection and blow molding machines.

• Process troubleshooting, mold changes, material and color changes.
• Color changes, process improvements, process adjustments as needed.
• Started up jobs and or performed color changes when needed.
• Help with mold changes and color changes as needed
• Manage jobs during color changes and die changes.

• Maintain and achieve correct material and color changes.
• Color changes and product changes as well.
• Perform material / color changes as needed.
• Purge barrel as needed for color changes.
• United States I was responsible for mold and color changes along with first piece inspection.

• set molds, did color changes.
• Color Changes, Material changes, Set-up robotic pickers, chillers systems, thermolator machines..
• Perform Color Changes Changed out Gaylord packaging and loaded semi-trucks
• Trained personnel on making minor repairs, lot changes, and color changes Perform preventative maintenance on molds Maintain cavitation.
• Level 2 Line leader relieve breaks Mold changes color changes material changes moisture checks perform light mold and machine repair

Show More

low Demand

• Provided technical support to direct operators while developing new processes and process controls in the manufacture of ceramic electronic networks.
• Collaborated with engineering team to take corrective action in resolving non-conformance operations, and develop new processes.
• Improved product by leveraging working knowledge of all manufacturing functions to evaluate efficiency of new processes.
• Developed and documented new processes that increased MOS wafer polishing output by over 2000 wafers per day with improved quality.
• Assisted process engineer to develop and implement new processes due to a design changed of a new product.

• Work on Design of Experiments to qualify new processes or materials, or to update current process flows.
• Teamed with staff to form solutions, learn new processes, and improve analysis / testing procedures.
• Worked closely with QA and R@D engineers to develop and qualify new processes.
• Sampled new products, recommended process improvements, and established new processes.
• Innovated new processes that reduced downtime, and raw material waste.

• Cooperated with engineering department to create and develop new processes.
• Assisted in training less experienced operators on existing new processes.
• Mentored, trained and certified process operators on new processes.
• Tested new molds and established new processes with Engineering.
• Test and review new processes developed by engineers.

• Interfaced with other departments to implement new processes.
• Trained production on new processes and equipment.
• Increased product portfolio by introducing new processes.
• Document and implement new processes.
• perform start ups create new processes record and maintain process make EOAT for robots program robots support production

Show More

low Demand

• Participated in continuous improvement programs to improve productivity and throughput, reduce costs and improve recovery.
• Participated in various process projects and provided research for all developmental teams.
• Ensured employee participation in safety meetings, discussions and continuous improvement.
• Participated in timely investigations of unexpected data and trends.
• Process Excellence projects: implemented lean manufacturing principles.

• Participate in training for advanced technical areas.
• Participated heavily in safety teams and culture.
• Enforced company policy and recommend disciplinary actions.
• Participated in data interpretation and presentation.
• Team player that performed various duties including editing film recipes, complex troubleshooting, and light maintenance support.

• Project requires leadership in assigning team roles, cross functional participation, film scripting/editing, and scheduling.
• Calculated fill recipes utilizing both computer and manual methods to properly blend gas mixtures.
• Shift Hitachi VeritySEM expert, responsible for programming and recipe maintenance.
• Conducted safety training classes, certification training in various industrial disciplines and first-responder to industrial accidents.
• Participated in new plant start up and exorcised a leadership role in meeting our customer's expectations.

• Participated in all phases of construction, commissioning, testing, and startup of Beta Carotene facility.
• Participate in troubleshooting activities such as: RCA's, TPM's and Kaizen methods.
• Generate Optiprobe recipes on a daily basis for new product lines.
• Create production recipes for Falcon Camtek Inspection tool.
• Perticipated in lead roles in numerous outages, projects, hazops, startups and shutdowns.

Show More

low Demand

• Operated and maintained manufacturing equipment in a rapidly changing environment including reporting and documenting process issues and malfunctions.
• Provided process training and answered internal and external process issues/complaints.
• Performed preventive maintenance and troubleshooting process issues.
• Investigated process issues using Six Sigma Method 1 tools, resulting in a cost avoidance of $435,000 in 2004.
• Performed valve alignments, equipment lock-outs, and troubleshot process issues as needed.

• Collaborate with engineers and maintenance to troubleshoot and resolve equipment and process issues.
• Identify and implement long term functional solutions to recurring process issues.
• Trouble shooting mechanical, tooling, material, and process issues.
• Worked with teams to identify process issues and improvement opportunities.
• Identify and resolve process issues that arise during production.

• Assisted Process Technicians with process issues during the shift.
• Maintained production, re-work, and process issues.
• Required to answer and troubleshoot all process issues.
• Assisted engineering on identifying the process issues.
• Resolved process issues through systematic problem solving.

• Try outs, start ups, program robots, fix process issues, make line up and run shift
• Job Duties - Improve cavitation and cycle time, Help line machines with process issues and daily training on molding problems.
• Repair and rebuild process valving and piping, read P&ID Schematics Monitor and troubleshoot Process issues.
• Run proto type pilots for all new products; troubleshoot daily on line process issues.
• Debugged inprocess issues related to SMT process.

Show More