Product engineer jobs in Huntsville, AL - 447 jobs

As a Product Engineer II at AeroVironment, one sustains engineering support for UAV systems for military and commercial applications. Includes design modifications of structural components, electro-mechanical assemblies, payloads, ground equipment, launching systems, flight control actuators, prototype hardware development, performing design verification testing, and configuration management of products. Other duties: developing & maintaining manufacturing drawings and bills of materials for components and assemblies using industry drafting standards, supporting design reviews, assisting project managers with the planning and scheduling of engineering work, and supporting manufacturing & suppliers with the production of mechanical components & assemblies. Position Responsibilities Sustains engineering support related to a product line Manages product line configuration and change orders in Agile PLM system Understands product design and features, be familiar with the manufacturing process. Understands customer performance and configuration requirements for production Acts as a technical point of contact for ongoing support and change initiation, including managing manufacturing and customer issues escalated to engineering Assists in proposal & report writing, review of contracts for production orders Helps coordinate the transition for new products and product variants into production Coordinates the release and update of engineering design documentation, operator manuals, bill of materials, manufacturing procedures, product acceptance test procedures, and production tooling and test equipment Coordinates development, testing and release of product improvements and variants in cooperation with product line manager, design engineers and project managers Provides component obsolescence management for the product line Provides customer support for failure analysis, field bulletin technical content, general product information Works with suppliers, purchasing and planning to ensure resolution of technical issues that impact production Other duties as assigned Basic Qualifications (Required Skills & Experience) Bachelor's Degree in a related field of study is required or equivalent combination of education, training, and experience Lean Six Sigma experience or Green Belt certification 2 - 5 years of related experience in a similar role, including experience in an engineering design. environment, including support of products in production Experience with unmanned air vehicles a plus RF, digital, and communications electronics design Electronics manufacturing troubleshooting PCB layout, schematics and assembly's Design/drafting/CAD (Altium), including ASME Y14 drawing standards Ability to solve basic structural dynamics problems Strong understanding of configuration management principles Understand General Engineering fundamentals, mathematics, physics, material properties, electronics, systems, software Understand requirements for building of production assemblies, including documentation for use on production floor Demonstrated ability to integrate across technical disciplines and organizations, including program management, manufacturing, quality, purchasing, suppliers and customers Demonstrated familiarity with office software and computer based productivity tools Other Qualifications & Desired Competencies Desirable experience or attributes: Agile PLM data management system product configuration management standards (MIL-HDBK-61A, EIA-649-B) Exercises judgment within defined procedures and practices to determine appropriate action. Contributes to meeting project cost and schedule Applies company policies and procedures to resolve a variety of issues. Typically performs multiple tasks on one project. Completes tasks within schedule and budget Works on problems of moderate scope where analysis of situations or data requires a review of a variety of factors Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties Displays strong initiative and drive to accomplish goals and meet company objectives Takes ownership and responsibility for current and past work products Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company Demonstrates effective problem-solving, analytical, interpersonal and strong communication skills Consistently demonstrates teamwork, collaboration and puts the success of the team above one's own interests Physical Demands Ability to work in an office and manufacturing environment (Constant) Required to sit and stand for long periods; talk, hear, and use hands and fingers to operate a computer and telephone keyboard (Frequent) Requires frequent travel to support working with suppliers, resolving product issues, participating in system tests, and supporting customers Clearance Level No Clearance The salary range for this role is: $69,259 - $98,175 AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: T his position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR U.S. Citizenship required

PPG's Aerospace Business is now hiring an Aerospace Product Design Engineer to join the team onsite in Huntsville, AL! As the Design Engineer, you will be accountable for the engineering design support of new and existing Aerospace Transparencies products throughout the world. You will provide product testing and product performance evaluations to assure that products and transparency programs will profitably meet performance expectations defined by the customer, regulatory agencies and Aerospace Products, Transparencies. Key Responsibilities: Technical responsibilities include providing support to Huntsville, Sylmar and AmpaSpace manufacturing facilities and all related products through the effective use of engineering skills and experience in structural design and analysis, electrical design, product testing, and product documentation. Responsible for technical communications within PPG, as well as to customers and to governmental regulatory agencies and authorities by means of engineering test reports, presentations, white papers, etc., in support of all new and existing products. Interaction with customers, sales, product support engineering, program management, manufacturing, quality assurance, GTC, other PPG manufacturing facilities and possibly regulatory agencies is required. Provide continuous improvement for the department's environmental, health and safety, quality and value performance to insure an injury free work place, 100% compliance to customer satisfaction while meeting plant profitability objectives. Participate on safety, quality and value improvement teams, be responsible to attend and contribute to several ongoing activities such as manufacturing planning, budget preparation and departmental IT planning. Will actively participate in and the PPG New Product Introduction (NPI) process during Technical Reviews and Management Gate Reviews (including New Program Selection Meeting). Remain technically aware of industry trends, government regulations, customer requirements and PPG Aerospace Transparency's manufacturing process requirements in order to personally contribute suggestions and recommendations. Qualifications: 5+ years' experience in the Aerospace industry. Minimum Bachelor of Science degree in Mechanical, Aerospace, or related Engineering field required. Must be proficient in both 3D and 2D CAD, SolidWorks and AutoCAD preferred. Experience with Aerospace structural design and analysis, including knowledge of finite element method. Experience providing technical support within a manufacturing facility. Strong ability to support multiple projects simultaneously. Product data management (PDM) experience is a plus. Must possess strong communication and collaboration skills. Only US Citizens, Green card holders, political asylees, or refugees are eligible to apply. About us: Here at PPG we make it happen, and we seek candidates of the highest integrity and professionalism who share our values, with the commitment and drive to strive today to do better than yesterday - everyday. PPG: WE PROTECT AND BEAUTIFY THE WORLD™ Through leadership in innovation, sustainability and color, PPG helps customers in industrial, transportation, consumer products, and construction markets and aftermarkets to enhance more surfaces in more ways than does any other company. To learn more, visit *********** and follow @ PPG on Twitter. The PPG Way Every single day at PPG: We partner with customers to create mutual value. We are "One PPG" to the world. We trust our people every day, in every way. We make it happen. We run it like we own it. We do better today than yesterday - everyday. PPG provides equal opportunity to all candidates and employees. We offer an opportunity to grow and develop your career in an environment that provides a fulfilling workplace for employees, creates an environment for continuous learning, and embraces the ideas and diversity of others. All qualified applicants will receive consideration for employment without regard to sex, pregnancy, race, color, creed, religion, national origin, age, disability status, marital status, veteran status, sexual orientation, gender identity or expression. If you need assistance to complete your application due to a disability, please email ******************. PPG values your feedback on our recruiting process. We encourage you to visit Glassdoor.com and provide feedback on the process, so that we can do better today than yesterday. Benefits will be discussed with you by your recruiter during the hiring process. PPG pay ranges and benefits can vary by location which allows us to compensate employees competitively in different geographic markets. PPG considers several factors in making compensation decisions including, but not limited to, skill sets, experience and training, qualifications and education, licensure and certifications, and other organizational needs. Other incentives may apply. Our employee benefits programs are designed to support the health and well-being of our employees. Any insurance coverages and benefits will be in accordance with the terms and conditions of the applicable plans and associated governing plan documents.

RELOCATION ASSISTANCE: No relocation assistance available CLEARANCE TYPE: SecretTRAVEL: Yes, 10% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman Space Systems, Multi-Domain Operations, and Missile Defense Integration Business Unit (BU) has an exciting career opportunity for a Sr. Principal Mechanical Engineer Level 4 to join our team of qualified, diverse individuals. This position will be in Huntsville, AL. Position Overview: As a Mechanical Engineer you will support the GMD Weapon System (GWS) Hardware Engineering team's design efforts working within an Agile environment. Your core tasks will entail performing finite element analysis, reviewing analyses, and providing oversight to junior engineers developing analysis products. Additional responsibilities include maintaining design drawings for multiple Ground Systems (GS) IPT hardware systems and their interfaces with facilities. Essential Functions: Under the direction of your program leadership, responsibilities include performing analyses IAW industry and military standards. Develop design drawings, maintaining drawings, evaluating hardware design efforts, scheduling, and planning required tasks. Leading small teams and writing reports to support milestone reviews. Accountability and active participation in team meetings and internal/external demos, and documenting progress on team dashboards is expected. Generate engineering documentation including technical drawings, specifications, and test reports. Mentoring and cross-training junior engineers in analysis work, reviews, and approving their analysis results to meet customer requirements. Basic Qualifications: Bachelor's Degree in a STEM (Science, Technology, Engineering or Mathematics) discipline from an accredited university and 8 years of related experience, or a Master's Degree and 6 years of related experience, or 4 years of related experience with a PhD. Ability and willingness to travel up to 10% of the time. Applicants must have a current active in-scope U.S. Government DoD issued Secret security clearance at the time of application which is required to start. Must be able to support an in-office / closed-area work environment full-time. Ability to communicate data in a clear and concise manner. Experience using a 3D CAD Package such as SolidWorks, Creo, or NX Recent experience in thermal, fatigue, static and/or dynamic analysis of mechanical structures, systems, and subsystems. Experience reviewing 2D mechanical drawings per ASME standards Prior experience with engineering PLM systems such as Teamcenter and MRP system such as SAP. Prior experience with the design, test, and/or integration and deployment of mechanical and structural components, systems, or subsystems Understanding and application of industry engineering technical standards; demonstrated structural design experience and impact assessment. Recent experience generating engineering documentation including technical drawings, specifications, technical reports, test procedures, program procedures, and CDRLS. Experience in evaluating vendor documents to ensure specifications and datasheet meets requirements. Familiarity with MIL-STD-810, MIL-STD-1366, MIL-STD-1472, ASME Y14.5, ASME Y14.100, MIL-STD-31000 Preferred Qualifications: BS in Mechanical or Aerospace Engineering Excellent interpersonal, written communication, and presentation skills, including the ability to clearly and succinctly communicate complex concepts Experience leading a small team, including task and schedule planning, to meet major project milestone objectives. Experience in one or more of the following system engineering knowledge areas: technical planning, requirements derivation, functional analysis, timeline analysis, trade studies, cost and risk analysis, interface definition, system design, system integration, verification and validation, supportability, and effectiveness analyses for total systems. Experience using analytical software tools, to analyze and reduce data to identify key characteristics and trends. Experience with mission critical and safety critical systems, components, etc. Familiarity with Missile Defense Agency (MDA) Core Standards: MDA-QS-001-MAP, MDA-QS-003-PMAP, MDA Instruction 5000.20-INS (ETR Process) Familiarity with the GMD domain and GMD Launch Support Systems hardware Hands-on mentality and a passion for fast-paced environments. Experience with Finite Element Analysis and Modeling theory and application using industry standard structural analysis software (ANSYS, GTStrudl, ABAQUS, STAAD, Femap, NX Simcenter, NASTRAN, Creo Simulation or SolidWorks Simulation) DOORS and/or CAMEO exposure Primary Level Salary Range: $123,400.00 - $185,000.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Job DescriptionSalary: The Mechanical Design Engineerwill develop innovative designs to challengingengineering problems for a wide variety of applicationsincludingbutnot limited to thermal-structural engineering and mechanical design. The Mechanical Design Engineer will develop detailed design criteria from customer requirements and use strong engineering principles and tools to develop robust and reliable solutions. Designs are expected to include hardware such as test fixtures, custom mechanical assemblies, pressure vessels, piping systems, weldments, etc. The Mechanical Design Engineer will regularly coordinate with engineers from other disciplines and backgrounds to ensure proper design integration. The Mechanical Design Engineer will occasionally develop CAD models and drawing packages for design solutions. Perform taskleadactivities to ensure proper due diligence for designs within the Mechanical Engineers responsibility. Design components and assemblies such as machined components, sheet metal components, weldments, pipe routing, cable routing, 3D printed parts, injection molding parts, mechanical assemblies, electrical assemblies, etc. Develop design documentation such as drawings, presentations, white papers, calculation packages, reports, etc. Perform review of design documentation from other ATS and third-party engineers. Present designs and design progress for customer review and feedback. Performstructural andpossiblyaerothermal, thermal-structural, and flow analysis using hand calculations orappropriate softwaretools tovalidatemechanical designs. Requirements: 2+ years of relevant experience BS in engineering or related field (equivalent experience may be accepted) Secret DoD Clearance or the ability to obtain a Secret DoD Clearance Desired Design experience with SolidWorks, Inventor, Creo, AutoCAD, or other relevant CAD softwares Desired Analysis experience with ANSYS or ABAQUS,CAESAR, AFTFathom, AFT Arrow, and MATHCAD Experience with GD&T Experience designing custom machined components, large assemblies, and piping systems Experience applying engineering codes and standards such as ASME BPVC, ASME B31.3, AISC 360-10, AWS D1.1,ASME Y14.5,etc. Desired Configuration Management experience and/or experience with PDM Drawing Check experience Note:ATS is a drug-free workplace. The unlawful manufacture, distribution, dispensing, possession, or use of a controlled substance is prohibited. All candidates who receive conditional offers of employment are subject to drug testing. In addition, ATS is an E-Verify employer. Export Control Regulations: Applicants for employment at ATS must be a U.S. citizen or national, U.S. permanent resident (i.e.current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.

GeneCapture offers a transformative workplace with opportunities for professional growth in an innovative and collaborative environment. We are developing novel platform technologies for rapid, portable, and affordable infection diagnostics at the point of care. You will be joining GeneCapture's flexible team of engineers and scientists with our eyes on the exciting potential of our breakthrough technology. You will be exposed to all stages of the medical product development cycle. Product Development & Manufacturing Process Engineer As a product developer, the candidate will directly support daily engineering and manufacturing activities with a focus on supply chain, product assembly, and process scalability. The candidate will work as a member of the Product Design & Development Team responsible for the design of medical, laboratory, and industrial disposable devices. The candidate much be self-motivated and a great problem-solver. Education • Bachelors of Science in Mechanical Engineering or similar B.S. degree (Associates degree may be considered with relevant experience) Required Experience • 3-7+ years industry experience developing medical / laboratory devices • Development of production test equipment • 2+ years of experience in a manufacturing environment • Experience with multiple plastic joining and bonding methods • Proficiency with Microsoft Office products (Word, Excel, PowerPoint, etc.) • Product Verification & Validation • Quality Documentation • Familiarity with Injection molding and tooling design Additional Characteristics • Proficient in technical writing and creating summary reports • Exposure to Rubber/Polymer Sealing Technologies • 3D Printing, Rapid Prototyping experience • Effective communication with people and capable of leading meeting discussions • A self-starter and require little oversight to complete given tasks • Experience working with diverse groups of individuals, including engineers, technicians and scientists • Diagnostic cartridge design & development • Familiarity with ISO 13485 and 21 CFR 820 Quality System Requirements • 3D modeling & 2D drawing experience with SolidWorks • Experience with high volume low cost fluidic disposable products Duties and Responsibilities • Work as part of a team supporting engineers and technicians. • Work with in-house project staff and outside vendors to optimize design for manufacturability of a point of care disposable diagnostic cartridge • Support multiple projects in an environment that changes quickly in response to product learnings. • Create, maintain and execute test plans and test cases for the products • Work in cross-functional project teams to plan and cost features • Design, build and improve test equipment and tools/processes • Investigate product issues, provide clear and insightful analysis of root cause, analyze patterns and effectively prioritize failure mode risks • Create detailed design and engineering documentation; including engineering drawing, reports and design intent documentation • Support project design reviews, ensuring proper material selection, component tolerances, etc. • New product design, prototyping and testing • Test fixture design, prototyping and testing • Works with manufacturing and outsourcing vendors concerning questions and problems encountered with drawings. Key Word Search • Medical Device • Plastic Joining • Plastics Manufacturing • ISO 13485 • 21 CFR 820 • Product Design • Product Testing • Technical Writing • Problem Solving • Design Control • Quality Control • SolidWorks Physical Demands/Environmental Factors/Mental Functions ADA Requirements: The physical demands, work environment factors, and mental functions described below are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Disclaimer: All job requirements are subject to possible revision to reflect changes in the position requirements or to reasonably accommodate individuals with disabilities. Some requirements may exclude individuals who pose a threat or risk to the health and safety of themselves or other employees. This job description in no way states or implies that these are the only duties which will be required in this position. Employees will be required to follow other job-related duties as requested by their supervisor/manager (within guidelines and compliance with Federal and State Laws). Continued employment remains on an "at-will" basis. Physical Demands • Must be able to remain in a stationary position (sit or stand) for prolonged periods (50% of the time). • Frequently moving between work areas. • Frequent operation of common equipment. • Vision abilities - close vision, distance vision, and ability to adjust/focus. • Ability to lift 20 pounds. • Continuous mental and visual attention, requiring constant alertness or activity. Environmental Factors • Moderate to high noise level (e.g., lab space with multiple equipment, computers, printers). • Workspace is generally an indoor lab setting and other common spaces throughout HudsonAlpha with controlled temperature conditions. Mental Functions • Maintain emotional control under stress. • Ability to understand complex problems and to collaborate and explore alternative solutions. It is the policy of GeneCapture, in accordance with all applicable laws, to recruit, hire, train, and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, disability, genetic information, sexual orientation, veteran status, or any other basis prohibited by applicable law.

FLSA STATUS: Exempt SALARY RANGE: The anticipated salary range for this role is $91,000 to $115,000 annually. This range reflects a good faith estimate based on the targeted level for the role and typical compensation benchmarks across U.S. locations. Actual compensation may vary depending on the selected candidate's qualifications, experience, geographical location, and internal alignment. SUMMARY A Manufacturing Engineer works to bridge the engineering and production teams, helping transition components, projects, and testing from ideation to manufacturing. Production Engineers work to develop, evaluate, and improve production processes considering engineering requirements, costing, materials, efficiency, and design constraints. To be successful as a Manufacturing Engineer, you should be an independent thinker and keen problem-solver. Outstanding production engineers can diagnose problems, train staff, and provide effective recommendations. RESPONSIBILITIES The following job functions are a basic requirement but are not limited to and may be assigned other duties. Develop and evolve the manufacturing processes, ensuring quality work is done in a safe and efficient manner. Creation, revision, and approval of production documentation such as travelers, assembly procedures, and test procedures. Lead continuous improvement efforts through a Kaizen approach liaising with engineering to develop plans that improve production while reducing costs and labor. Provide guidance, support, and mentorship to technicians and engineering team members. Establish safety procedures and protocols that prioritize the wellbeing of others. Evaluate and qualify vendors, suppliers, materials, and components. Operation of equipment for CAM programming, tool making and prototyping as required Observe and assist engineering and production teams in resolving issues. Communicating challenges with leadership REQUIRED QUALIFICATIONS The following are a non-exhaustive list of qualifications for the position: Bachelor's Degree in engineering or related technical field Minimum of 2 years work experience in manufacturing or engineering environment. Direct experience with shop equipment, such as 3D Printers, tooling, and hand tools Preparing and presenting technical presentations to leadership Knowledge with wire harness manufacturing processes (soldering, terminating, tooling) Experience using Kaizen (continuous improvement), A3 (problem solving), Poka Yoke (error proofing) techniques for process improvement. Understanding of ERP systems and implementation challenges. Strong people and communication skills, willing to work with others Proven leadership and mentoring skills Ability to work from engineering specifications, manuals, drawings, established procedures, verbal and written instructions Ability to draft, read, and interpret technical drawings Ability to perform data analytics and visualization (PowerBI). Ability to utilize CAD software (SolidWorks preferred) REDWIRE DEFENSE TECH BENEFITS Matching 401(k) Paid PTO Paid holidays Medical, vision, and dental insurance Group Short-Term & Long-Term Disability HSA and FSA Options Critical Care Plan Accident Care Plan CLEARANCE REQUIREMENTS This position may require access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). To comply with the requirements of the ITAR and/or the EAR, applicants will be asked to provide specific documentation to verify a US person's status under the ITAR and the EAR. WORK ENVIRONMENT AND PHYSICAL REQUIREMENTS The work environment may involve a standard office setting while also incorporating elements of a production area. Employees will use standard office equipment, including computers, and must demonstrate stamina to sit or stand while maintaining attention to detail despite potential interruptions. The role may require occasional activities such as walking, climbing, stooping, crouching, and bending. Vision is necessary for reading printed materials and a computer screen, while hearing and speech are essential for effective communication both in person and over the telephone. Additionally, the position may necessitate travel by air or automobile. Employees may be required to use personal protective equipment, including safety glasses, safety shoes, and shop coats, to ensure safety in the production environment. Employees may be able to lift up to 30 pounds as needed. REDWIRE DEFENSE TECH IS AN EQUAL OPPORTUNITY EMPLOYER All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. Redwire Defense Tech is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact Human Resources. Continued employment remains on an “At-Will” basis.

At Polaris Inc., we have fun doing what we love by driving change and innovation. We empower employees to take on challenging assignments and roles with an elevated level of responsibility in our agile working environment. Our people make us who we are, and we create incredible products and experiences that empower us to THINK OUTSIDE. The Manufacturing Engineer is responsible for establishing and implementing the most cost-efficient methods for production. This individual will plan and coordinate the activities necessary to produce specified products within safety, quality and cost standards and ensure schedule compliance. ESSENTIAL DUTIES & RESPONSIBILITIES: Directly manage a single or multiple process tech and other technical direct reports. Work with a team of engineers and supervisors in order to achieve department goals. Identifies areas of unnecessary cost and drive cost savings for the department. Develop and implement new manual and automated processes with ability to recommend and specify equipment details. Develops and updates process documentation and procedure instruction. Conducts direct labor studies using acceptable engineering practices and establishes labor standards on operations, set up, and workstation layout. Defines tooling and fixturing used in the manufacturing process, while also assisting with ideas for specialized processes. Coordinates with tool vendor to specify or procure new tooling and fixtures to make necessary changes. Available to travel to run off new tooling at vendor sites. Analyzes and evaluates manufacturing methods and standards. Provides solutions to problems that adversely affect cost, operator safety, productivity and quality. Qualify and develop new specifications. Work closely with other engineering groups such a Design, Assembly, Tube fab and Paint. Work with department M.E.s as well as New Product Engineers on model year changes and new product. Recognize current production problems and provide feedback to the team and direct feedback to design engineers. Assists in development and troubleshooting of manufacturing equipment. Assists in preparation of departmental budget including material, manpower, equipment and outside procurement costs, and operates within approved parameters. Reviews preliminary designs, making recommendations to reduce costs and improve manufacturability and quality on new or existing parts. Develops detailed and accurate capital equipment studies, makes appropriate recommendation. Operates within an approved budget. Reviews and evaluates manufacturing costs pertaining to make vs. buy decisions. Drive lean culture. Performs other assignments as requested. Works to minimize down time to production, during improvement projects and model year changes. Perform assessment and critical decisions in line down situation. SKILLS & KNOWLEDGE B.S. in Industrial, Mechanical, or Manufacturing engineering required 3+ years of Manufacturing Engineering experience in a fast-paced production environment preferably in automotive industry Strong organizational, communication, and leadership skills Excellent verbal and written skills required Proficiency with PC's and Microsoft suite Proficiency in CAD including AutoCAD, CREO and SolidWorks Understanding of SPC Strong Project Management skills Preferred: Lean Manufacturing knowledge Ability to read and interpret mechanical print Works independently with moderate supervisory direction WORKING CONDITIONS: Fast-paced manufacturing environment with high technology driven processes. Office and manufacturing environment with most of the time spent on the floor. Some travel ( Strong team dynamic. #LI_ERF1 #LI-ONSITE To qualify for this position, former employees must be eligible for rehire, and current employees must be in good standing. We are an ambitious, resourceful, and driven workforce, which empowers us to THINK OUTSIDE. Apply today! At Polaris we put our employees first, by offering a holistic approach to their health and financial wellbeing. Polaris is proud to offer competitive compensation, including a market-leading profit-sharing plan that is fundamental to our pay-for-performance culture. At Polaris, employees are owners of the company through company contributions to our Employee Stock Ownership Plan and discounted employee stock purchases plan. Employees receive a generous matching contribution to 401(k), financial wellness education and consultation to plan for their financial future. In addition to competitive pay, Polaris provides a comprehensive suite of benefits, including health, dental, and vision insurance, wellness programs, paid time off, gym & personal training reimbursement, life insurance and disability offerings. Through the Polaris Foundation and our Polaris Gives paid volunteer time off, we support employees who actively volunteer their time, efforts, and passions to improve the health and wellbeing of the communities in which they live, play and work. Employees at Polaris drive our success and are rewarded for their commitment. About Polaris As the global leader in powersports, Polaris Inc. (NYSE: PII) pioneers product breakthroughs and enriching experiences and services that have invited people to discover the joy of being outdoors since our founding in 1954. Polaris' high-quality product line-up includes the Polaris RANGER , RZR and Polaris GENERAL™ side-by-side off-road vehicles; Sportsman all-terrain off-road vehicles; military and commercial off-road vehicles; snowmobiles; Indian Motorcycle mid-size and heavyweight motorcycles; Slingshot moto-roadsters; Aixam quadricycles; Goupil electric vehicles; and pontoon and deck boats, including industry-leading Bennington pontoons. Polaris enhances the riding experience with a robust portfolio of parts, garments, and accessories. Proudly headquartered in Minnesota, Polaris serves more than 100 countries across the globe. *************** EEO Statement Polaris Inc. is an Equal Opportunity Employer and will make all employment-related decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, national origin, age, disability, marital status, familial status, status with regard to public assistance, membership or activity in a local commission, protected veteran status, or any other status protected by applicable law. Applicants with a disability that are in need of an accommodation to complete the application process, or otherwise need assistance or an accommodation in the recruiting process, should contact Human Resources at ************ or ****************************** . To read more about employment discrimination protection under U.S. federal law, see: Know Your Rights: Workplace Discrimination is Illegal (eeoc.gov) .

TSC's Production Division is looking for a Manufacturing Engineer IV, based in Huntsville, AL (Discovery). This group provides products and services in the areas of radar, communication systems, sensors, antennas and other electronics systems to the missile, radar/sensor system, communications, control systems, data acquisition, and signal processing markets. The company has developed products ranging from chip-level, application-specific integrated circuits (ASIC) to complete, turnkey radar and communication systems. TSC has established a state-of-the-art hardware capability that is well respected by customers in Government and industry. TSC also provides full spectrum systems engineering support including theoretical analysis, requirements generation, interface control, and test planning/execution/data analysis. As a Manufacturing Engineer IV at TSC, you'll tackle challenges head-on. Analyze and optimize production processes, integrate new technologies for improved efficiency and quality. Collaborate with diverse teams to identify and eliminate bottlenecks, ensuring the seamless flow of high-performance electronics. This role demands analytical prowess, strong leadership, and a commitment to continuous improvement. If you thrive in a dynamic environment where your expertise directly impacts production performance, then consider contributing your skills to TSC. Responsibilities: Assist in developing and implementing assembly procedures Introduce and train employees on new equipment Assists in leading and adhering to safety, quality, cost, schedule, technical and programmatic requirements, and performance expectations. Conduct process audits and ensure compliance with internal and external quality standards (e.g., IPC, AS9100). Providing shop floor support, developing manufacturing plans, tooling requirements, engineering change implementation and coordinating changes in the build process within an electrical/mechanical manufacturing facility, while mentoring and training junior engineers and technicians. Translate engineering intent, drawings, and configurations into work instructions that will produce high quality hardware. Apply Design for Manufacturability (DFM) and Design for Assembly (DFA) techniques on both new and existing products to produce optimal design and manufacturing solutions. Required Qualifications A bachelor's degree in an engineering equivalent field from an ABET accredited school is required. Experience should include military/DoD manufacturing experience, mechanical assemblies and/or circuit card assemblies and integration. Familiar with IPC, J-STD, MIL and DOD Standards, in-depth knowledge, and experience with AS9100 standards and certification processes. Experience in development and implementation of a new maintenance programs and creating training programs. US Citizenship due to Operations Security (OPSEC) Requirements. and the ability to obtain and maintain a government security clearance. Preferred Qualifications Active DoD secret clearance. Experience with development programs and transition to production. Experience applying audit standards, procedures, and techniques, strongly preferred. Interact across all levels of the organization; efficiently and effectively communicate and implement agreed upon changes; navigate difficult situations and conversations to a productive outcome. Strong analytical skills in root cause analysis, corrective / preventative action determination. Effective communication, teamwork, and leadership abilities. Able to work independently or as a part of a team in a fast-paced environment. Ability to accurately maintain records and documents in accordance with policies and procedures. TSC Benefits: TSC offers a stable work environment, a competitive salary and a comprehensive benefit package, including ESOP contributions, 401k Matching Program, Flexible Work Schedules, Tuition Reimbursement, Paid Leave and much more. Applying to TSC: Only those candidates invited for an interview will be contacted. Employment at TSC is contingent upon the successful completion of a comprehensive background check, security investigation, and a drug screening. This contractor and subcontractor shall abide by the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, or for inquiring about, discussing, or disclosing information about compensation. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Huntsville, AL, US, 35824 Leveraging its deep expertise as the global leader in catalysis and precious metals, BASF Environmental Catalysts and Metal Solutions (ECMS) serves customers in many industries including automotive, aerospace, indoor air quality, semiconductors, and hydrogen economy, and provides full loop services with its precious metals trading and recycling offering. With a focus on circular solutions and sustainability, ECMS is committed to helping our customers create a cleaner, more sustainable world. Protecting our elements of life is our purpose and this inspires us to ever-new solutions. ECMS operates globally in 15 countries with approximately 20 production sites and over 4,000 employees. **As a** **Manufacturing Engineer II,** **you will create chemistry by..........** Supporting manufacturing operations for the Light Duty Coating department of the Huntsville ECMS site. The Huntsville site primarily produces automotive catalysts and that function is segmented into a Light Duty plant and a Heavy Duty plant, which are differentiated by their technologies and catalyst applications. Working within the Light Duty plant, a Manufacturing Engineer II in the Coating production area is responsible for active support and continuous improvement on the part of the process that applies the catalytic coating to the substrates. This production area consists of multiple coating lines and has a wide portfolio of different products and technologies that it produces. The active support function of a manufacturing engineer requires them to get deeply involved in troubleshooting machine issues and assisting other operations personnel in resolving real-time issues. The continuous improvement function of a manufacturing engineer is centered around creating and driving department initiatives to enhance the performance and culture of the Light Duty Coating department. The manufacturing engineer will also serve as a primary operation representative on capital projects and will have direct accountability for the performance of several coating lines. **In this role you will......** + Develop and execute various initiatives to improve the long-term performance of the Light Duty Coating department and support immediate production issues. + Organize, participate, or lead projects, improvement discussions, and department initiatives. + Organize improvement activities and develop training material to communicate equipment changes to Operations and facilitate the growth and development of operators and shift engineers. + Contribute to safety improvements and investigating safety incidents. + Communicate with various support groups on topics to drive improvements in Light Duty Coating. + Develop weekly summaries to evaluate the performance of the coating lines that you are responsible for. + Analyze production data to identify improvement opportunities and support quality investigations. **_Your elements for success......._** + _Bachelor's degree in engineering required_ + _2+ years of Manufacturing experience required_ + _Knowledge of process safety and EHS standards required_ + _Strong written and verbal communication skills_ + Proficient in MS Excel (including Visual Basic macros), Word, PowerPoint, and SQL Server ManagementStudio preferred **_You @ BASF ECMS_** At BASF ECMS you get more than just compensation, Medical & Dental. Our total offer includes a wide range of elements you need to be your best in every stage of your life. + Flexible Work Arrangements whenever possible + Retirement Benefits with company contributions + Competitive Medical and Dental Plan Options + Disability and Life Insurance Programs + Wellness Programs + Maternity/Paternity Leave, Infertility & Adoption reimbursement + Mentoring & Development Programs + Employee Discounts + Pet insurance **_What are you waiting for? Click Apply now to BELONG@BASF!!_** BASF takes security & data privacy very seriously. We will never request financial information of any kind via email, private text message or direct message on any social medial platform or job board. Furthermore, we will never send a candidate a check for equipment or request any type of payment during the job application process. If you have experienced any of the above, please contact ******************************** to report fraud. BASF is committed to pay transparency practices. The competitive Pay Range for this role is $80k-$90k annually. Actual pay will be determine based on education, certifications, experience, and other job-related factor permitted by law. **All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status.** **Nearest Major Market:** Huntsville

We are always looking forward to receiving resumes from candidates with skills and technical experience in the aerospace sector. We are very happy to receive speculative resumes if you are looking for a career change within the aerospace industry. Our flexible recruitment services will provide you with the following employment options: * Contract * Contract to Direct * Direct Our experienced consultants are experts in their field and are well placed to advise you on all aspects of aerospace recruitment opportunities, and employment trends.

Create Your Career: Grow With Us Your growth matters to us-that's why we offer a variety of ways for you to develop your career. With professional and leadership development opportunities like Team Lead Academy, education reimbursement, mentoring, and company sponsored networking events, you can take control of your own career path on your own terms with a company that believes in you. A Place Where You Belong People are at the heart of our business. We reflect a diversity of cultures, backgrounds, and experiences. We expect our people, clients, and partners to treat one another with dignity and respect. This means promoting inclusion, celebrating diversity, and appreciating the differences we all bring to our workplace. Support Your Well-Being Our comprehensive benefits package includes wellness programs, paid holidays, paid time off, employee perks and much more. With these benefits, plus the option for flexible schedules, we'll support you as you pursue a balanced, fulfilling life-at work and at home. Responsibilities: Perform, document and report microstructural analysis of manufactured aerospace hardware and witness test coupons. Develop a metallurgical understanding of metals processed by casting, forging, welding, selective laser melting, directed energy deposition, and hot isostatic pressing for the determination of comparative relationships. Qualifications A degree Engineering or related field is required. A degree from an ABET accredited institution preferred. Typically, educational requirements are the equivalent of a Ph.D. with a minimum 9 years of experience; Masters with at least 13 years of experience, or a BS with at least 15 years of experience. Required Skills: Previous experience in either metallic or nonmetallic additive manufacturing (AM). Proficiency in CAD modeling software (preferably ProEngineer) and its application to AM. Must understand design-for-additive considerations/challenges and be able to communicate those to product designers. The ability to be "hands-on" and to communicate and work well with others. Desired skills: Understanding of in-situ monitoring processes. Ability to create generative designs for additive parts. Demonstrated leadership and innovation in the field of AM. Project management experience is highly desired. Essential Functions Work Environment: Office environment. Requires ability to provide clear, concise, accurate and timely communication, both verbally and in writing (100%). Requires ability to interact professionally with co-workers, management, and client (100%). Requires travel in the domestic USA (10%). Requires ability to work at a computer for long periods of time (100%). Physical Requirements: Requires sitting for extended periods of time in meetings with peers, management, and with our client at NASA facilities to discuss technical issues (10%). Also, requires sitting for extended periods of time at a desk to write reports and perform engineering tasks (80%). Requires ability to use stairs or elevators for access between floors and multiple buildings at NASA and other facilities (10%). Equipment and Machines: Requires ability to operate a personal computer, a telephone, fax machine, copier, calculator, and other general office equipment (100%). Attendance: Normal workday is from 7:30 a.m. through 4:30 p.m., Monday thru Friday. Minimal overtime may be required (10%) to meet schedule milestones and to support technical demands of the job. Regular attendance is a necessity and adequate arrangements for delegating duties during absences are required. Other Essential Functions: The ability to work independently with minimal supervision, and to make rational decisions, and to exercise good judgment is essential (100%). Grooming and dress must be appropriate for the position and must not impose a safety risk/hazard to the employee or others. Proof of U.S. Citizenship is required. #ESSCA, #YesWeAreRocketScientists, #ASED Compensation Details: 0.01 The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws. Benefits Overview: Our health and welfare benefits are designed to support you and your priorities. Offerings include: Health, dental, and vision insurance Paid time off and holidays Retirement benefits (including 401(k) matching) Educational reimbursement Parental leave Employee stock purchase plan Tax-saving options Disability and life insurance Pet insurance Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits. Original Posting: 01/09/2026 - Until Filled Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

HIRING 2nd Shift Electronics: Cell Phones and other Devices Monday through Thursday **OFF Fridays WILL Train Daily: Sit and Stand JOBS Must be Flexible for Both Other JOBS: Some Local Delivery Driver Duties: needs Clean MVR Overtime: Can Volunteer 1, 2 or 3 Saturdays for more hours BUYS LUNCH Tuesdays and Thursdays 90 Days: Company Pays 100% Blue Cross Blue Shield *APPLY: Send Resume

Do you have a passion for leveraging data, analytics, and AI to drive meaningful change? At GE Aerospace, we are transforming supply chain processes to address one of our most critical business challenges: delivery. As a Staff Enterprise Application Engineer specializing in Palantir, you will utilize your expertise in Palantir Foundry and AWS cloud technologies to design, deploy, and tailor solutions for complex aerospace challenges. In this role, you will build and maintain Foundry pipelines, modular applications, and workflows, while working closely with stakeholders to create cutting-edge solutions using ontology, advanced analytics, and AI. **** **Roles and Responsibilities** + Architect and design sound/supportable technical solutions to complex business requirements + Develop and maintain Foundry pipelines using Pipeline Builder to ingest, transform, and integrate data. + Build modular applications and workflows leveraging Python, and Foundry AIP. + Collaborate with data engineers, analysts, and stakeholders to refine data models and ontology mapping. + Assist in Foundry workshops to guide stakeholders through platform capabilities. + Support testing, debugging, and performance tuning of Foundry applications. + Work with aerospace data to identify patterns, trends, and insights using Palantir Foundry and AWS analytical tools. + Develop custom applications and workflows within Foundry and AWS to address specific challenges. + Ensure data integrity and compliance with aerospace industry standards. + Apply lean methodologies to identify opportunities for process improvement. + Share feedback with Palantir and AWS product teams to enhance tools and workflows. + Provide technical coaching and direction to more junior teammates. **Technical Qualifications** + Strong experience in Python, PySpark, and front-end frameworks like React, Angular, or Vue.js. + Experience with Pipeline Builder, AIP, and Foundry's application development ecosystem. + Proficiency in AWS cloud services such as EC2, S3, Lambda, RDS, and CloudFormation. + Experience with Git-based code repositories and CI/CD workflows. **Minimum Qualifications** + Bachelor's degree from accredited university or college with minimum of 4 years of professional experience OR associate's degree with minimum of 7 years of professional experience OR High School Diploma with minimum of 9 years of professional experience + Minimum 3 years of professional experience in Computer Science or "STEM" Majors (Science, Technology, Engineering and Math) + **Note:** Military experience is equivalent to professional experience The base pay range for this position is $110,700- $184,600. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on October 31, 2025. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs ( _i.e_ ., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. **Eligibility Requirement:** + Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job. **Desired Characteristics** + Ability to operate in an ambiguous environment as we establish this transformation program and define roles & responsibilities. + Demonstrated ability to quickly understand new concepts and analyze system deficiencies + Passionate about security and the quality of the applications they support + Organized, thorough, and detail oriented + Collaborates well with others to solve problems and actively incorporates input from various sources + Eager to learn, shares ideas, encourages and accepts feedback well + Strong analytical skills - strong problem-solving skills, communicates in a clear and succinct manner and effectively evaluates information / data to make decisions; anticipates obstacles and develops plans to resolve + Demonstrated customer focus - evaluates decisions through the eyes of the customer; builds strong customer relationships and creates processes from the customer's viewpoint + Experience working with an offshore development team + High level of energy and enthusiasm, with the ability to thrive in a dynamic, fast-paced setting + Comfortable with empowering colleagues and inspiring others to be their best **Note:** To comply with US immigration and other legal requirements, it is necessary to specify the minimum number of years' experience required for any role based within the USA. For roles outside of the USA, to ensure compliance with applicable legislation, the JDs should focus on the substantive level of experience required for the role and a minimum number of years should NOT be used. This Job Description is intended to provide a high-level guide to the role. However, it is not intended to amend or otherwise restrict/expand the duties required from each individual employee as set out in their respective employment contract and/or as otherwise agreed between an employee and their manager. **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

ReLogic Research, Inc. is seeking a self-starting, highly motivated, experienced (5+ years) Mechanical Engineer with design, manufacturing, and testing experience for a full-time position at ReLogic. ReLogic's central focus is to continually promote a culture that stimulates personal, professional, and intellectual growth, while developing elegant solutions to tough problems. We encourage teammates to be self-governing based on high standards of professionalism and judgement. This Mechanical Research Engineer role will be in direct support of ReLogic's efforts to solve priority problems highly aligned with our national defense strategy. Primary Responsibilities Perform hand calculations on mechanical design assemblies, calculating basic stresses and possible interferences due to tolerance stack up, accounting for thermal effects and preloads Create CAD models and derived drawings of parts and complex assemblies in SolidWorks Support development of manufacturing equipment Conduct ASTM standard thermo-mechanical material characterization tests Requirements & Desired Skills Active Secret security clearance or ability to receive and maintain clearance BS in Mechanical Engineering, Aerospace Engineering, or related discipline 5+ years' experience in relevant industry or technology area SolidWorks modeling and drafting experience required Familiar with ASME Y14.100, “Engineering Product definition and Related Documentation Practices” Experience with geometric dimensioning and tolerancing (GD&T) practices required SolidWorks Product Data Management (PDM) experience is highly desired Familiar with composite materials fabrication, e.g., prepreg lay-up, VARTM, etc., desired Familiarity with ASTM testing of composites and ceramic materials desired Experience with use of mechanical (Universal Test Machines) and/or thermo-physical test equipment (e.g., CTE, TGA, DSC) desired Experience with basic machining equipment, e.g., drill press, manual mill and lathe, waterjet, etc. desired This is full-time salaried position with full benefits offered. Approximately 10% of travel is expected. ReLogic Research, Inc.'s policy is to ensure equal employment opportunity without discrimination or harassment based on race, color, religion, sex (including pregnancy or childbirth), national origin, age, citizenship, disability, military obligation, or any other characteristic protected by law. In cases of disability, ReLogic follows the Americans with Disability Act (ADA). ReLogic prohibits and does not tolerate discrimination or harassment.

Company is seeking to hire a Bioprocess Engineer to support the company's ongoing development of novel immunotherapies. The position will play an integral role in the establishment of a GMP manufacturing facility to produce plasmid DNA active pharmaceutical ingredient (API). · Lead the development of pilot scale downstream processing (DSP) unit operations of plasmid DNA from bacterial cell paste (from 10 L - 100 L bioreactor fermentation), to include lysis, clarification, ultrafiltration/diafiltration, and ion exchange chromatography. · Plan and execute structured process development experiments to achieve the target yield, process optimization, product quality, scale-up and process robustness objectives. · Play a pivotal role in the establishment of a GMP manufacturing facility to produce plasmid DNA active pharmaceutical ingredient (API). · Document work thoroughly with a detail-oriented approach, write concise technical reports, and make effective presentations to management and other team members. · Translate developed processes into standard operating procedures (SOPs) as well as necessary calibration and preventive maintenance SOPs. · Write validation protocols and lead the technical support staff to successfully execute IQ, OQ, and PQ. · Lead the process transition into the new facility. · Troubleshoot, optimize, and improve ongoing process activity with scientific curiosity. Qualifications · B.S. or M.S. degree in Biochemical/Chemical Engineering preferred. Will also consider other disciplines such as biology, chemistry, or related field with requisite experience. · 4+ years of hands-on biopharmaceutical experience at pilot or commercial scale with bioreactor fermentation (USP) and DSP of plasmid DNA from bacterial cell paste, including lysis, clarification, ultrafiltration/diafiltration, and ion exchange chromatography. · 2+ years of experience working in a GMP manufacturing environment. Candidates with supervisory experience are preferred. · Significant experience using ultrafiltration and diafiltration with tangential flow filtration (TFF) in a DSP unit operation. Additional Information Competitive salary, bonus, stock, relocation and benefits are offered.

Nordson Medical - Atrion, a global leader in high quality medical device manufacturing, is seeking an experienced and highly motivated individual to join our team in Arab, Alabama as a Manufacturing Engineer. We are committed to creating a diverse and inclusive workplace, and we are looking for candidates who share that same commitment. Essential Job Duties and Responsibilities Works with New Product Development (NPD) personnel during the concept and development phases of each new product initiative to incorporate manufacturability and assembly features into the product to reduce overall part costs. Identifies, justifies and purchases components and/or equipment to support NPD activities. Works with NPD personnel to successfully transfer new products from the design phase into the manufacturing environment. Provides Manufacturing Engineering support for injection molding, assembly and product packaging operations. Oversees process development and validation for assembly and product preparation departments to ensure that a repeatable process is established, maintained and electronically documented. Provides assistance to the Manufacturing Manager for developing and implementing new and/or refined processes for injection molding, assembly, and product preparation operations. Responsible for developing and maintaining appropriate project plans and timelines for active projects. Provides support for continuous improvement initiatives, by working with the production teams to identify new opportunities which bring about new optimized facility layouts that increase part flow, increase personnel productivity, enhance personnel safety and reduce overall part costs. Creates, justifies and implements manufacturing strategies that support automation concepts which lead toward efficient “unattended” operation of equipment. Generate comparative studies in determining the best fit for manufacture of product. Upon successful evaluation of options, set up assembly process in-house, or oversee the transfer of assemblies to offsite subcontractors by qualifying and validating the assembly processes within their facility. Develops, justifies and manages capital equipment projects to support new products, as well as increase productivity on existing products. Knowledge/Skills/Abilities Must be able to read and understand mechanical drawings (ANSI Y14.5, ISO 594, and Geometric Tolerancing). Must have a general understanding of system troubleshooting for mechanical and electrical problems and experience with robotics. Must be able to successfully use common inspection instruments (micrometers, calipers, gauge pins, etc.) Must understand and be able to implement Statistical Process Control (SPC) tools. Strong written and oral communication skills. Ability to read, analyze and interpret common scientific and technical journals. Ability to respond to common inquiries and complaints from customers and regulatory agencies. Ability to effectively present information to top management, public groups, and/or boards of directors. Good analytical skills. Ability to apply principles of logical scientific thinking to a wide range of intellectual and practical problems. Ability to deal with nonverbal symbolism (formulas, scientific equations, graphs) in its most difficult phases. Ability to deal with a variety of abstract and concrete variables. Basic operating knowledge of PCs, and supporting software (Microsoft Word, Microsoft Project, Excel, Power Point) Fundamental understanding of ERP systems is required Working knowledge of CAD tools required, SolidWorks & Moldflow preferred. Ability to read and understand electrical diagrams, ladder logic and install general electrical equipment preferred Education and Experience Requirements Bachelor's Degree from a four-year college or university in Mechanical, Manufacturing, or Industrial Engineering preferred. Minimum 0-2 years' experience in Plastic Injection Molding and Automated and/or Manual Assembly Processes. Familiarity with specifying, procuring and installing automated and manual assembly equipment is preferred. Nordson Corporation provides equal employment opportunity to all applicants and employees. No person is to be discriminated against in any aspect of the employment relationship due to race, religion, color, sex, age, national origin, ancestry, disability, sexual orientation, gender identity, genetic information, citizenship status, marital status, pregnancy, veteran status, or any other status protected by applicable federal, state, or local law. All employment offers are contingent upon successful completion of our pre-employment drug screening and background/criminal check, consistent with applicable laws. Third party recruiters and agencies should not contact employees of Nordson or its subsidiaries directly. Any resumes sent to a hiring manager or submitted to Nordson employees are considered unsolicited and property of Nordson. Nordson will not pay a placement fee unless the agency or recruiter has a signed contract with Nordson's Human Resources department in advance of submitting a candidate for consideration. Verbal and written approvals will not be considered a valid contract for service.

At Polaris Inc., we have fun doing what we love by driving change and innovation. We empower employees to take on challenging assignments and roles with an elevated level of responsibility in our agile working environment. Our people make us who we are, and we create incredible products and experiences that empower us to THINK OUTSIDE. Duties and Responsibilities: Directs/guides tooling techs and robot programmers in operations. Directly manage a single or multiple process tech reports. Work with a team of engineers and supervisors in order to achieve department goals. Identifies areas of unnecessary cost and drive cost savings for the department. Develop and implement new manual and automated welding processes with ability to recommend and specify equipment details. Develops and updates process documentation and procedure instruction. Conducts direct labor studies using acceptable engineering practices and establishes labor standards on operations, set up, and workstation layout. Defines tooling and fixturing used in the manufacturing process, while also assisting with ideas for specialized processes. Coordinates with tool vendor to specify or procure new tooling and fixtures to make necessary changes. Run off new tooling at vendor sites. Analyzes and evaluates manufacturing methods and standards. Provides solutions to problems that adversely affect cost, operator safety, productivity and quality. Research methods and procedures for cost reductions, work cell development and material flow improvement. Qualify and develop new welding specifications. Work closely with other engineering groups such a Design, Assembly, Tube fab and Paint. Work directly with New Product Introduction team on model year changes and new product. Recognize current production problems and address in new design development. Assists in development and troubleshooting of manufacturing welding equipment. Assists in preparation of departmental budget including material, manpower, equipment and outside procurement costs, and operates within approved parameters. Reviews preliminary designs, making recommendations to reduce costs and improve manufacturability and quality on new or existing parts. Develops detailed and accurate capital equipment studies, makes appropriate recommendation. Operates within an approved budget. Reviews and evaluates manufacturing costs pertaining to make vs. buy decisions. Drive lean culture. Performs other assignments as requested. Skills and Knowledge: Bachelors of Science degree in Mechanical Engineering, Industrial Engineering or Weld Technology with emphasis in welding, recommended 1-3+ years-previous manufacturing engineer experience required, high pace automotive manufacturing experience preferred. Experience with weld tool maintenance and design preferred. Proficient in Microsoft Office Suite with focus in Excel. Robotic Weld Programming experience a plus. Lean Manufacturing knowledge is strongly preferred. Ability to read and interpret weld and mechanical prints. Works independently with moderate supervisory direction Excellent mechanical aptitude and mechanic skills Strong Project management skills Desire to work in a strong team dynamic. Motivated to work on, ride, and improve industry-leading powersports products Working Conditions: Fast-paced manufacturing environment with high technology driven processes. Office and manufacturing environment. Some travel ( Strong team dynamic. #LI-ERF1 #LI-ONSITE To qualify for this position, former employees must be eligible for rehire, and current employees must be in good standing. We are an ambitious, resourceful, and driven workforce, which empowers us to THINK OUTSIDE. Apply today! At Polaris we put our employees first, by offering a holistic approach to their health and financial wellbeing. Polaris is proud to offer competitive compensation, including a market-leading profit-sharing plan that is fundamental to our pay-for-performance culture. At Polaris, employees are owners of the company through company contributions to our Employee Stock Ownership Plan and discounted employee stock purchases plan. Employees receive a generous matching contribution to 401(k), financial wellness education and consultation to plan for their financial future. In addition to competitive pay, Polaris provides a comprehensive suite of benefits, including health, dental, and vision insurance, wellness programs, paid time off, gym & personal training reimbursement, life insurance and disability offerings. Through the Polaris Foundation and our Polaris Gives paid volunteer time off, we support employees who actively volunteer their time, efforts, and passions to improve the health and wellbeing of the communities in which they live, play and work. Employees at Polaris drive our success and are rewarded for their commitment. About Polaris As the global leader in powersports, Polaris Inc. (NYSE: PII) pioneers product breakthroughs and enriching experiences and services that have invited people to discover the joy of being outdoors since our founding in 1954. Polaris' high-quality product line-up includes the Polaris RANGER , RZR and Polaris GENERAL™ side-by-side off-road vehicles; Sportsman all-terrain off-road vehicles; military and commercial off-road vehicles; snowmobiles; Indian Motorcycle mid-size and heavyweight motorcycles; Slingshot moto-roadsters; Aixam quadricycles; Goupil electric vehicles; and pontoon and deck boats, including industry-leading Bennington pontoons. Polaris enhances the riding experience with a robust portfolio of parts, garments, and accessories. Proudly headquartered in Minnesota, Polaris serves more than 100 countries across the globe. *************** EEO Statement Polaris Inc. is an Equal Opportunity Employer and will make all employment-related decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, national origin, age, disability, marital status, familial status, status with regard to public assistance, membership or activity in a local commission, protected veteran status, or any other status protected by applicable law. Applicants with a disability that are in need of an accommodation to complete the application process, or otherwise need assistance or an accommodation in the recruiting process, should contact Human Resources at ************ or ****************************** . To read more about employment discrimination protection under U.S. federal law, see: Know Your Rights: Workplace Discrimination is Illegal (eeoc.gov) .

We are always looking forward to receiving resumes from candidates with skills and technical experience in the aerospace sector. We are very happy to receive speculative resumes if you are looking for a career change within the aerospace industry. Our flexible recruitment services will provide you with the following employment options: * Contract * Contract to Direct * Direct Our experienced consultants are experts in their field and are well placed to advise you on all aspects of aerospace recruitment opportunities, and employment trends.

Job DescriptionSalary: ReLogic Research, Inc. is seeking a self-starting, highly motivated, experienced (5+ years) Mechanical Engineer with design, manufacturing, and testing experience for a full-time position at ReLogic. ReLogics central focus is to continually promote a culture that stimulates personal, professional, and intellectual growth, while developing elegant solutions to tough problems. We encourage teammates to be self-governing based on high standards of professionalism and judgement. This Mechanical Research Engineer role will be in direct support of ReLogics efforts to solve priority problems highly aligned with our national defense strategy. Primary Responsibilities Perform hand calculations on mechanical design assemblies, calculating basic stresses and possible interferences due to tolerance stack up, accounting for thermal effects and preloads Create CAD models and derived drawings of parts and complex assemblies in SolidWorks Support development of manufacturing equipment Conduct ASTM standard thermo-mechanical material characterization tests Requirements & Desired Skills Active Secret security clearance or ability to receive and maintain clearance BS in Mechanical Engineering, Aerospace Engineering, or related discipline 5+ years experience in relevant industry or technology area SolidWorks modeling and drafting experience required Familiar with ASME Y14.100, Engineering Product definition and Related Documentation Practices Experience with geometric dimensioning and tolerancing (GD&T) practices required SolidWorks Product Data Management (PDM) experience is highly desired Familiar with composite materials fabrication, e.g., prepreg lay-up, VARTM, etc., desired Familiarity with ASTM testing of composites and ceramic materials desired Experience with use of mechanical (Universal Test Machines) and/or thermo-physical test equipment (e.g., CTE, TGA, DSC) desired Experience with basic machining equipment, e.g., drill press, manual mill and lathe, waterjet, etc. desired This is full-time salaried position with full benefits offered. Approximately 10% of travel is expected. ReLogic Research, Inc.s policy is to ensure equal employment opportunity without discrimination or harassment based on race, color, religion, sex (including pregnancy or childbirth), national origin, age, citizenship, disability, military obligation, or any other characteristic protected by law. In cases of disability, ReLogic follows the Americans with Disability Act (ADA). ReLogic prohibits and does not tolerate discrimination or harassment.