Product engineer jobs near me - 2,607 jobs

Job Title: Industrial/ Manufacturing Engineer Employment Type: Full-Time We are seeking a highly skilled Industrial/Manufacturing Engineer to support our production operations in Raymond, Ohio. This role focuses on optimizing manufacturing processes, developing tooling and fixture solutions, and supporting welding-related engineering activities across the plant. The ideal candidate will bring strong hands-on engineering expertise, a continuous-improvement mindset, and the ability to work collaboratively with cross-functional teams to enhance quality, safety, and efficiency on the shop floor. Key Responsibilities Process & Manufacturing Engineering Analyze, develop, and improve manufacturing processes to increase productivity, reduce waste, and enhance overall operational efficiency. Perform time studies, workflow analysis, and capacity planning to support production scaling and line balancing. Develop and maintain standardized work instructions, process documentation, and manufacturing guidelines. Tooling & Fixture Development Design, specify, and validate tooling, jigs, and fixtures required for assembly, fabrication, and welding operations. Collaborate with tool shops and suppliers for fabrication, trials, modifications, and implementation of fixtures. Conduct fixture capability studies and ensure tools meet quality, safety, and ergonomic requirements. Welding Engineering Support Provide technical expertise for welding processes (MIG/TIG/spot welding), weld sequence optimization, and weld quality improvement. Support welding equipment setup, parameter development, and troubleshooting. Work with quality teams on weld inspections, defect reduction initiatives, and compliance with welding standards. Continuous Improvement (CI) & Lean Initiatives Implement Lean Manufacturing and Six Sigma methodologies to drive continuous improvement. Lead Kaizen events, root-cause analysis, PFMEA reviews, and corrective action implementation. Identify automation opportunities and support integration of robotics, welding automation, or material-handling improvements. Cross-functional Collaboration Work closely with Production, Quality, Maintenance, and Safety teams to resolve issues and support daily operations. Provide engineering guidance during new product launches, process changes, and equipment commissioning. Support APQP activities, PPAP documentation, and process validation. Qualifications & Experience Required Bachelor's degree in Industrial Engineering, Manufacturing Engineering, Mechanical Engineering, or related field. 3-7 years of experience in a manufacturing environment, preferably automotive or heavy industrial. Hands-on experience with tooling, jigs, fixtures, and welding processes. Strong understanding of Lean Manufacturing principles, process flow, and industrial engineering fundamentals. Proficiency in CAD software (SolidWorks, AutoCAD, or similar). Familiarity with PFMEA, control plans, work instructions, and related engineering documentation. Preferred Experience with robotic welding systems or automated welding lines. Knowledge of GD&T and precision fixture design. Working experience with PLC-controlled equipment or automation integration. Certification in welding engineering or Six Sigma (Green Belt or above).

📍 Ohio, U.S. | Full-Time | Onsite We are seeking an experienced NX Designer to support the design and development of aerospace tooling and ground support equipment for civil and defense applications. This role is part of a growing engineering organization supporting complex, high-quality products used by leading aerospace OEMs. The ideal candidate is highly proficient in CAD Software, enjoys working closely with engineering and manufacturing teams, and is comfortable supporting designs from concept through production. What You'll Do: Create and modify 3D models and 2D drawings using Siemens NX or CATIA. Support the design of aerospace tooling, fixtures, and ground support equipment. Collaborate with engineers, manufacturing, and quality teams to ensure designs are manufacturable and compliant. Update and maintain design documentation, BOMs, and drawing packages. Support design changes, revisions, and continuous improvement initiatives. Participate in design reviews and support production troubleshooting as needed. What We're Looking For: Strong proficiency in Siemens NX or CATIA (required). Experience in aerospace manufacturing, tooling, fixtures, or heavy mechanical equipment preferred. Ability to produce clear, accurate drawings and models to engineering standards. Familiarity with GD&T and engineering documentation best practices. Strong attention to detail and ability to work in a collaborative, deadline-driven environment. Associate or Bachelor's degree in Mechanical Design, Engineering Technology, or related field preferred. Why Join: Work on high-impact aerospace products supporting civil and defense programs. Join a growing organization with expanding U.S. manufacturing operations. Collaborate with experienced engineers and manufacturing teams. Competitive compensation and comprehensive benefits. If you're an NX Designer who enjoys hands-on design work and seeing your designs built on the shop floor, we'd love to hear from you.

Resource 1 is seeking a Senior AI Engineer for a long-term, remote contract with our client in the Healthcare industry. Initial contract duration is 6 months, with expected extensions. This can be done 100% remotely from anywhere in the US. Selected individual will be brought in to help develop and deliver next-generation AI solutions across the healthcare enterprise. This role is hands-on and ideal for an engineer experienced in building GenAI and multi-agent systems using modern AI frameworks and Google Cloud Platform (GCP). Will collaborate closely with other engineers to design, build, test, and optimize AI capabilities within a scalable production environment. Key Responsibilities: Develop and enhance enterprise-scale multi-agent systems leveraging LLMs and autonomous agent frameworks, using tools such as Google ADK, Agentspace, MCP, RAG, and A2A orchestration. Contribute to the design and implementation of RAG pipelines using BigQuery and Vertex AI for knowledge grounding and factual response accuracy. Implement and tune agent reasoning workflows including orchestration, grounding, decision-making, and multi-step reasoning. Build and support distributed training workflows, online inference systems, and low-latency serving architectures leveraging Google Cloud services. Develop secure and scalable AI components including reusable orchestration layers, connectors, and observability hooks. Participate in developing agent governance and compliance frameworks aligned with enterprise standards. Translate business features and requirements into technical implementation tasks and contribute to solution design discussions. Support deployment pipelines, operational monitoring, troubleshooting, and optimization of production AI systems. Required Qualifications: Degree in Computer Science, AI/ML, or related technical field. Hands-on experience in Generative AI and agentic AI development. 4-5 years of total experience in AI/ML engineering or applied machine learning. Experience building and deploying production AI/ML systems. Solid understanding of modern model architectures including transformers, embeddings, and prompt engineering concepts. Hands-on expertise with Vertex AI (training, pipelines, deployment, orchestration, and monitoring) and Google Cloud native AI services. Experience with one or more agent frameworks (i.e. Google ADK/ Agentspace, LangChain/ LangGraph, LlamaIndex, CrewAI or AutoGen) Python and LLM integration, including MCP and A2A orchestration. Experience with Kubernetes, Cloud Run, Dataflow or Pub/Sub. Preferred Qualifications: Experience with AI observability, responsible AI frameworks, and model monitoring tools (Vertex AI Monitoring, BigQuery logging, Looker dashboards). Experience with multi-modal models and/or advanced optimization strategies. Contributions to open-source AI tooling or published applied work.

BS Degree or higher in ME. Minimum of 7 years of automotive experience in using Catia for 3D design. Minimum of 5 years of experience in designing BIW components A related advanced degree may be substituted for 2 years of experience. Strong knowledge of vehicle styling and packaging. Strong understanding of DFM (Design for Manufacturing) required. Experience with Catia v6 (3DX) is a significant advantage. Familiarity with vehicle simulation, especially in Body rigidity, NVH, and Crash, is highly preferred. Ability to program in VBA and EKL to automate design workflows is highly preferred. Detail-oriented with strong organizational and multitasking capabilities to handle simultaneous projects and support requests. Excellent communication skills to liaise between design and CAE teams. Use industry best practices and up-to-date technologies to identify inefficiencies and improve the design process. A self-starter who proactively accomplishes tasks with minimal guidance.

Project Engineer - Water & Wastewater | Columbus, OH We are seeking a motivated Project Engineer to support the planning and execution of water and wastewater construction projects in the Columbus market. This role offers hands-on exposure to WWTPs, pump stations, utilities, and civil infrastructure, working closely with Project Managers, Superintendents, and field teams. Key Responsibilities Support planning, scheduling, and budgeting for water and wastewater projects Review drawings, specifications, and contracts for scope and compliance Prepare RFIs, submittals, material takeoffs, and project documentation Coordinate with subcontractors, vendors, and field crews to maintain schedules Track quantities, production, and costs to support project controls Assist with field operations, safety, quality, and issue resolution Participate in meetings with owners, inspectors, and project stakeholders Support project closeout including as-builts, O&M manuals, and punch lists Qualifications Bachelor's degree in Civil Engineering, Construction Management, or related field 1-4 years of experience in water/wastewater or heavy civil construction Ability to read and interpret civil, utility, and process drawings Proficiency with Bluebeam, AutoCAD, MS Office, and scheduling tools Strong communication, organization, and teamwork skills Safety-focused mindset What's Offered Competitive salary with clear career progression Full benefits package (health, dental, vision, retirement) Exposure to high-impact municipal water and wastewater projects Supportive, team-oriented environment focused on development and long-term growth

We are seeking a motivated and detail-oriented Project Engineer to join our dynamic team. The ideal candidate will play a pivotal role in overseeing various construction projects from inception to completion, ensuring that all aspects are executed efficiently and effectively. This position requires strong project management skills, proficiency in construction management software, and a solid understanding of engineering principles. Your responsibilities in this role: Maintain contract documents, posting and distribution of addenda, field orders, RFI's and Requests for Proposal Control shop drawings and submittals to review for contract compliance and establish a routing process to ensure that all involved in the work are kept informed Lead the project QC including all deviation reports, pre-pour inspections, completion lists, testing reports, etc. and actively update the Project Manager and Superintendent Coordinate Requests for Information to and from architectural engineer, owner and other contractors and subcontractors Assist in assembling proposals and prepare owner change order requests Maintain “As-Built” drawings; prepare final close out sets Secure operations manuals guarantee and warranties; assist in project close-out What you need to qualify: 1-3 years of relative job experience in commercial construction highly preferred BS degree in Construction Management or Engineering Thorough understanding of industry practices and standards Strong foundation in database management (ex. Excel) and related industry software (ex. Bluebeam) Highly collaborative work style with excellent communication skills Join us as we build innovative solutions in the construction industry! LRT is proud to be an Equal Opportunity Employer and member of the Drug Free Safety Program.

Who is IC? Independence Construction is one of the largest CM businesses headquartered in Northeast Ohio. As part of the DiGeronimo Companies, we offer our clients self-perform services through our affiliated companies, as well as bring an owner's approach to projects through the company's work as a developer. We bring our experience and reputation for honesty, integrity, and outstanding performance to the world of design and management in order to ensure the best results for our partners, subcontractors, and community. What do we believe in? PEOPLE: Provide a safe, family-oriented environment. Commitment to integrity. Protect our most valuable assets. PERFORMANCE: Always deliver the highest quality. Find solutions. Provide value to our partners. COMMUNITY: Positively impact the communities we serve. Give back. Leave the world a better place than we found it. As a Project Engineer, your key responsibilities are to assist the project manager and/or superintendent in one or more aspects of a construction project. Coordination with Subs, vendors, suppliers, and Independence Construction project team. Administer and monitor compliance with construction contracts with Owners, subcontractors and vendors. Coordinate and expedite materials and services for the job site, in conjunction with superintendent. Schedule and manage meetings throughout each phase of construction and preconstruction. Assist the PM with the management of Project Budget, Budget Revisions, Cost Projections, and Cash Flow Projections. Assist with the generation of reports. Review and coordinate structural, architectural and MEP drawings throughout the project. Assist PM in the oversight and management of change management processes. Collect and analyze the trade contractor proposal for scope changes. Review and negotiate the cost for the change in scope to ensure the pricing is accurate and fair for the change in work. Log the change management to the correct cost codes. Issue the subcontract change order upon approval of the change by Owner and PM. Responsible for the entire RFI process (initiate, review the response, maintain a log and distribute to team as appropriate. Responsible for the entire submittal process (initiate, review the submittal, maintain a log and distribute to team as appropriate upon approvals. Responsible to keep accurate and current at all times the drawing log, submittal log, and RFI log. Coordinate all project meetings with PM and Superintendent prior to the start of project. Attend Owner / Architect / CM (Contractor) meetings. Collect, review and process subcontractor payment applications as assigned by the PM. Assist in compiling owner payment applications. Assist the Superintendent and PM as requested in creating and updating the Master Schedule. Quality Control and Quality Assurance - Work with the team (PM, PX, Supt.) for the development of the project QA/QC program. Assist PM and Superintendent with Close-out process. Assist with the preliminary punch list process. Coordinate owner-requested warranty requirements during the warranty period. Do you have what it takes? Bachelor's degree in construction management or engineering or equivalent combination of education and experience. 2-5 years of previous related experience is required Strong written and oral communication skills. Knowledge of budgeting and expense control. Able to write reports, and business correspondence. Able to organize work, engage in a variety of tasks simultaneously and consistently meet deadlines. Able to perform duties independently. Computer skills: Microsoft Office applications. Strong attention to detail.

Who You Are: You're a dynamic problem-solver with a passion for construction. Detail-oriented and driven, you thrive in collaborative environments and excel at managing multiple responsibilities. You're ready to take on challenges head-on and contribute to meaningful projects that make a difference. The Opportunity: You'll play a vital role in managing construction processes and driving project success. This role offers dynamic work, opportunities for growth, and a chance to make a significant impact in the Water, Wastewater, Industrial, and Energy sectors. Who We Are: Our people are our strength. As an employee-owned national construction company, we prioritize collaboration, innovation, and continuous improvement. We're committed to fostering a culture of growth and empowerment, where every team member is valued and supported. What You'll Do: As a Project Engineer, you'll work closely with the Project Manager and Superintendent to manage all construction processes effectively. From scheduling to safety, your responsibilities will include: Implementing Bowen's SQP process Supporting Field Engineer duties to ensure project success Facilitating communication with stakeholders Streamlining purchasing processes and coordinating submittals Identifying and addressing potential issues proactively Participating in project status meetings and reporting on progress Contributing to site safety audits and upholding safety standards Assisting in project close-out activities and estimating project divisions Why You'll Love Working At Bowen: The Right Size: Large enough for great resources, small enough that you'll personally know our leadership and they'll know you. Hands-On Experience: Work directly with Craft, PMs, Superintendents, and Engineering Partners, seeing the work unfold daily. We self-perform, fostering teamwork rather than just managing subcontractors. Growth Opportunities: The sky's the limit if you're willing to work hard, be patient, and take initiative. We're committed to developing future leaders and invest in your growth. Safety First: "Zero Injury and Genuine Concern for Others." We don't do shortcuts. We've built a culture where teams are empowered to speak up and continuously improve safety. Build Unique Projects: Our strength lies in deep, heavy, complex work. The variety will challenge you and keep things exciting. Strong Support System: We provide the training and team you need. Besides on-the-job training, we offer annual and bi-annual sessions at corporate, ensuring you're surrounded by a strong support system. Hard Work, Big Rewards: The work is tough but incredibly rewarding. We believe in Celebrating Success and encourage you to use your PTO. Our company trips and close-knit teams foster lasting friendships. While construction means some travel, we do our best to keep you close to home and always have your back. Must-haves in a Candidate: Bachelor's degree in construction/engineering or equivalent technical training 2+ years of construction experience Strong communication and interpersonal skills Proficiency in computer applications Sound understanding of cost analysis principles Nice to Haves in a Candidate: Experience working with self-perform construction operations Experience with advanced scheduling techniques Knowledge of value engineering principles Familiarity with construction safety standards and procedures Additional Details: This position will support our Columbus, OH operation. Must be comfortable with potential travel throughout the week. Benefits: Competitive Base Salary Medical, Dental and Vision Insurance PTO from Day 1 7 Paid Holidays (plus 6 additional half-days), 1 Community Day, 1 Floating Holiday Paid Parental Leave Annual Discretionary Bonuses Car Allowance Employer-paid Life Insurance with supplemental options 401k with Company Match HSA and FSA options Employee Referral Program Wellness Program Employee Assistance Program (EAP) Short and Long-Term Disability Family Planning and Adoption Assistance Education Reimbursement

Holder Construction is seeking qualified highly motivated candidates in our Mechanical, Electrical and Plumbing Services Team at one of our regional projects in Columbus, OH. Primary Responsibilities Communication with electrical/mechanical equipment vendors, electrical/mechanical design engineers, clients and subcontractors. This position involves procurement of electrical/mechanical subcontracts and equipment, managing contracts and contract deliverables from bid solicitation through contract award, equipment submittal coordination, assistance with electrical/mechanical and overall construction cost estimates. Common projects include commercial projects within our core markets: Data Centers; Aviation; Higher Education and Corporate / Commercial Office. Requirements For This Position Include Bachelor's degree in Mechanical, Electrical Engineering or Construction Management The ideal candidate will have 5+ years of Mechanical, Electrical and Plumbing preconstruction experience and have the following skill sets: Ability to read and understand electrical, HVAC, plumbing, architectural and civil plans, and specifications Familiar with standard concepts, practices, and procedures of MEP Systems and equipment Good communication skills Ability to identify and resolve issues Effective participation in a team environment Detail-oriented with the ability to manage multiple projects and tasks

About Us Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering, and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $7.6 billion in revenue for 2024, Clayco specializes in the "art and science of building," providing fast track, efficient solutions for industrial, commercial, institutional, and residential related building projects. The Role We Want You For The Senior Virtual Design and Construction (VDC) Engineer will become a strategic asset within a growing business unit and the key member of our project teams for the most creative builder in America. As part of VDC team you will be involved in a range of activities throughout the design-build cycle that are essential for a successful project delivery. These activities include support and implementation of Clayco's Digital Practice Technology in a variety of tasks as they relate to design analysis, design process, pre-construction, construction, and the facility handover. This is a critical support role with opportunity to become one of our VDC industry experts. The Specifics of the Role Provide assistance to design-build team to facilitate 3D and 2D coordination. Liaison with the design team and project subcontractors through multitude of BIM centric activities. Provide technical support for a range of application used in-house. Assist Pre-Con with quantities extraction and scheduling. Assist and coach the project teams in the use of companywide BIM best practices. Coordinate 3D content modeled by others and model any content not provided. Perform 4D virtual building analysis on model working closely with scheduling, project managers, and superintendents. Perform 5D virtual building analysis in close collaboration with the estimating team. Perform and document clash detection on virtual building model as well as assist in conflict resolution. Perform material quantity take-off of building model for conceptual estimating purposes utilizing leading edge BIM technologies. Manage model changes through design updates and as built conditions. Serve as the information manager and content gatekeeper for the duration of project. Requirements Bachelor's Degree in Architecture, Engineering, or Construction Management. 3-5 years of experience in AEC industry, in particular MEP coordination. Minimum 3 years of experience with VDC/BIM related processes. Solid knowledge of construction principles/practices required. Advanced proficiency with Autodesk Building Design Suite (Revit, Assemble Systems, AutoCAD, Navisworks), Structionsite, DroneDeploy, and BIM 360/ACC cloud-based technology. Willing to travel and/or relocate to a job site. Some Things You Should Know Our clients and projects are nationwide - Travel will be required. No other builder can offer the collaborative design-build approach that Clayco does. We work on creative, complex, award-winning, high-profile jobs. The pace is fast! This position is classified as a safety-sensitive role in accordance with applicable state and federal laws. Candidates selected for this position will be subject to a comprehensive background check, which includes mandatory drug testing. Why Clayco? 2025 Best Places to Work - St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal. 2025 ENR Midwest - Midwest Contractor (#1). 2025 ENR Top 100 Design-Build Firms - Design-Build Contractor (Top 5). 2025 ENR Top 100 Green Contractors - Green Contractor (Top 3). 2025 ENR Top 25 Data Center Builders - Data Center Contractor (Top 3). Benefits Discretionary Annual Bonus: Subject to company performance and individual contribution. Comprehensive Benefits Package Including: Medical, dental and vision plans, 401k, generous PTO and paid company holidays, employee assistance program, flexible spending accounts, life insurance, disability coverage, learning & development programs and more! Compensation The salary range for this position considers a wide range of factors in making compensation decisions including but not limited to: Education, qualifications, skills, training, experience, certifications, internal equity, and location. Compensation decisions are dependent on the facts and circumstances of each case.

The Commercial Group at Amphenol is currently seeking a Field Applications Engineer to support large Enterprise and Consumer Company. Our products help to enable the electronics revolution and remain a key enabler for all the major Tier 1 OEMs globally. The Company designs, manufactures and markets electrical, electronic and fiber optic connectors, coaxial and flat-ribbon cable, and interconnect systems. The primary end markets for the Company's products are communications and information processing. Including cable television, cellular telephone and data communication, storage, and information processing systems; aerospace and military electronics; and automotive, rail and other transportation and industrial applications. This role reports to the National Sales & Distribution Leader who is based in Atlanta, GA. Location: Dallas, TX / Austin, TX / Atlanta, GA / Charlotte, NC The candidate will work remotely but will be required to travel as needed based on customer requirements. This role involves covering the Southeastern and South-Central regions, which include multiple states and key clients from Texas to North Carolina. Responsibilities: We value our relationships with these companies, and we depend on our Sales and Field Applications Engineering Teams to foster these ongoing business partnerships. The FAE engineering team interfaces with customers, internal product development, product marketing, and the extended sales team to provide world-class interconnect solutions to our customers. Engineering resource on the sales team to lead technical aspects of the sales cycle; discovery, design, prototyping, and production Providing technical marketing support for the development and design in of Products, including internal/external power, memory, storage, and internal IO Prepare and participate in delivering technical presentations to the customer Develop customer-facing material that is application specific Provide customer support for all technical inquiries; provide product solutions to address customer concerns Help devise strategies to differentiate our products and solutions from our competitors Meet and exceed strategic objectives Some travel will be required to other customer or Amphenol locations in the US or Taiwan. Education/ Experience: Bachelor's Degree in an Engineering discipline or other technical equivalent Electrical Engineering, Mechanical Engineering Preferred 2+ years' experience in Design or Applications Engineering of electrical hardware components/ interconnect solutions industry Experience providing product marketing and technical support to produce design wins Skills: Proficient in communicating across organizational hierarchies High level of customer service, ability to build rapport with customers Proficient use of modeling tools such as Creo or Solid Works. Strong organizational and presentation skills Proficiency in Microsoft Office 365 (Excel, PowerPoint) Strong Program/Project Management

As a member of the FAE team, you will provide technical expertise and pre-sales support for IoT and Cloud solutions. Primary Responsibilities Provide pre-sales software development, technical support and consulting supporting demonstrations and deployment of solutions Coordinate, manage and conduct technical product demonstrations to existing and potential customers Provide technical sales support for internal sales team, prospective customers and partners Troubleshooting Develop content, execute presentations and product demonstrations to support marketing activities and virtual events Requirements Extensive software development experience using C/C++ Experience with Unix/Linux & embedded tools Experience with IoT protocols (Bacnet, LWM2M, modbus, OPC-UA, etc.) In-depth knowledge of ARM, x86 architecture Experience as technical sales support for Real-Time/Embedded Systems Excellent problem-solving skills Quickly learn & understand code written by others Multitask, prioritize & follow through Self-starting and independent working with limited supervision Travel Preferred Experience Embedded RTOS (QNX, VxWorks, INTEGRITY, ThreadX, etc.) Experience with Embedded development tools (compiler, debugger, IDE, etc.) Familiarity with Security technologies (PKI, HSM, etc.) Familiarity with Rest API and web services Experience with embedded safety and security platforms Education BS (or MS) Computer Science or Electrical Engineering related degree JO-1911-806

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency (“RF”) components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards (“PCB”s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at *********** Scope: The Field Applications Engineer is responsible for technical support for customers PCB designers and manufacturing groups. This position will interface with customers PCB designers early-on in the design cycle and provide feedback on routing and layout techniques, Signal Integrity performance, cost trade-off analysis of PCB layer stack-up, material selection process, and other electrical and mechanical requirements based on understanding of customer's end product application. Duties and Responsibilities: Educate customer designers and technologist on Design for Manufacture (DFM), Design for Value (DFV) Reduce customers' design cycle time by facilitating/eliminating problem disposition between TTM's pre-production engineering groups and the customer Improve the quality and completeness of design packages coming from the customer and help them by identifying design problems related to manufacturability and reliability test Update customer designers and manufacturing groups on TTM capabilities. Set roadmap and technology direction through formal customer presentations. Thorough understanding of TTM manufacturing capabilities and technologies to support QTA/NPI/High Volume Manufacturing; North America and Asia Pacific solutions Provide TTM manufacturing facilities with insight into future customer needs and technology requirements. Identify and communicate roadmap and capability gaps. Facilitate customer technical needs with engineering and operations. Analyze customer designs for manufacturability, controlled impedance, and specification improvements Establish technical contacts between customer and TTM to drive improved lines of technical communications and increased depth of relationships. Assist the pre-production teams thru the DFM/TQ process in getting “on hold” issues addressed at the customer site expeditiously, Assist the Sales Account Managers in increasing customer revenue through superior technical support and service Travel for customer sight visits to support issues, and/or, key programs as required. Create and conduct technical capability presentations in conjunction with the sales team Facilitate customer technical needs with engineering and operations. This position will interface regularly with TTM's Sales, Development, Pre-Production Engineering departments, and Operations, and it is essential that the employee be able to effectively balance the communication channels between these departments This position will interface regularly with TTM's Sales, Development, Pre-Production Engineering departments, and Operations, and it is essential that the employee be able to effectively balance the communication channels between these departments Essential Skills and Knowledge: Strong printed circuit engineering background and knowledge of entire PCB manufacturing process including; process flows, individual processing steps, and tooling Strong written and oral communication skills and the ability to work well with customers design groups Ability to make decisions influencing quality of PCB designs coming from strategic customers to enable high yielding product from TTM North America and Asia Pacific sites while transitioning from QTA/NPI to HVM. Self-motivated and willing to work with minimum supervision Ability to make routine decisions with general direction provided by department Manager Effective public speaking and presentation skills Disciplined in working remotely Education and Experience: Bachelor Degree in Engineering or related discipline preferred 5-7+ years of experience in engineering activities related to PCB manufacturing preferred Minimum level experience of electrical design performance and signal integrity (Impedance, insertion loss) Intermediate level skills for drawing / blueprint interpretation skills, and use of PCB CAM software and tooling PCB stack-up tools, Proficient with Microsoft Word, Excel, PowerPoint, Microsoft Project. Travel for customer visits, TTM NA manufacturing sites and TTM Asia Pacific sites for potentially up to 15-25% travel #LI-EC1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $106,974 - $188,127 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

To support our customers' success with Agilent's Atomic Spectroscopy portfolio, we are looking for an enthusiastic person to join our Professional Services consulting team. You will join a professional team of Field Application Engineers who support customers in the United States and Canada. You will be responsible for educating customers on the entire Agilent portfolio of Atomic Spectroscopy hardware and software and help them develop solutions to their specific application and analytical needs. Your Role: Your role is to provide our customers with post sales technical and application support on Agilent Atomic Spectroscopy (ICP-OES, ICP-MS and AAS) software and hardware products. Delivery of customized consulting and application support both remotely and at customer sites. Overnight travel is required 75% of the time. Interfacing with customers to answer questions and provide training using Agilent atomic spectroscopy products. Contributing to the effective and expedient resolution of customer problems Providing information to our Customer Service Organization that facilitates the transfer of knowledge and broadens organizational insight and awareness. Leading the design/ delivery of integrated multiple technologies solutions; is the key contributor of technical expertise and business/ industry knowledge Mentoring peers, colleagues and partners to drive workflow and application expertise. Solving complex, high impact system/application engineering services problems Qualifications Master's or PhD in Chemistry/Biochemistry or another life-science discipline At least 4 years of work experience with Agilent's ICP-OES, ICP-MS and AAS solutions with a deep understanding of workflow and applications Expertise in atomic spectroscopy techniques, workflows and solutions In-depth knowledge and experience in application implementation and troubleshooting Ability to work independently Excellent verbal, written, and presentation communications skills Drive, energy, and self-motivation Confidence to work independently and as part of a team Ability to learn new technologies on your own Proficiency in the use of Microsoft Office Suite Available for flexible work schedule and (minimum) 75% business travel Located within one hour drive of a major metropolitan airport. Additional Details This job has a full time weekly schedule. It includes the option to work remotely. Applications for this job will be accepted until at least December 22, 2025 or until the job is no longer posted. In the US, this position is eligible for reimbursement for personal vehicle usage.The full-time equivalent pay range for this position is $105,280.00 - $164,500.00/yr plus eligibility for bonus, stock and benefits. Our pay ranges are determined by role, level, and location. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. During the hiring process, a recruiter can share more about the specific pay range for a preferred location. Pay and benefit information by country are available at: ************************************* Agilent Technologies, Inc. is an Equal Employment Opportunity and merit-based employer that values individuals of all backgrounds at all levels. All individuals, regardless of personal characteristics, are encouraged to apply. All qualified applicants will receive consideration for employment without regard to sex, pregnancy, race, religion or religious creed, color, gender, gender identity, gender expression, national origin, ancestry, physical or mental disability, medical condition, genetic information, marital status, registered domestic partner status, age, sexual orientation, military or veteran status, protected veteran status, or any other basis protected by federal, state, local law, ordinance, or regulation and will not be discriminated against on these bases. Agilent Technologies, Inc., is committed to creating and maintaining an inclusive in the workplace where everyone is welcome, and strives to support candidates with disabilities. If you have a disability and need assistance with any part of the application or interview process or have questions about workplace accessibility, please email job_******************* or contact ***************. For more information about equal employment opportunity protections, please visit *************************************** Required: 75% of the TimeShift: DayDuration: No End DateJob Function: Services & Support

Job Details:Job Description: Altera Corporation, the world's largest independent provider of pure-play FPGA solutions, is looking for an outstanding Field Applications Engineer (FAE) to join our team! As the Channel FAE in the West, you will leverage your deep technical knowledge of FPGAs and systems, leadership & communications skills, and business acumen to engage with Altera's broad base customers and distributor FAEs and grow this important part of our business. You will work with cutting edge DSP, AI, embedded, high speed connectivity, security, etc. across a vast number of industries. This role will push your ability as an engineer exposing, exposing you to a wide variety of technologies and allowing you to build a broad network in the electronics industry. You will be expected to: Partner with distributor FAEs and the regional Distribution Sales Manager Work with our distribution FAEs to promote Altera technology to win new FPGA business: Present the technical capabilities of whole product portfolio Engage with customers' architects and key decision makers to understand their applications, influence their design choices, and develop creative solutions to their problems Create and deliver technical proposals based on product knowledge, customer requirements, and inputs from internal teams. Contribute to and execute on territory, account, and opportunity plans. Provide technical support to customers. Mentor and teach distribution FAEs to develop technical knowledge and skills. Build strong and influential relationships within Altera and the customer base. Lead the technical development & execution of product and applications based customer campaigns and proofs of concept. Salary Range The compensation below is reflective of a sales role that includes a salary + incentive. Our compensation reflects the cost of labor within the US market. Actual compensation may vary based on a number of factors including job location, job-related knowledge, skills, experiences, trainings, etc. $191.0K - $276.5K USD We use artificial intelligence to screen, assess, or select applicants for the position. Qualifications: BS in Electronics Engineering or equivalent with 5+ years of design experience and 3+ years of experience in Field Applications Engineering. Must have good presentation and interpersonal skills and be comfortable presenting technology and products. Must be proficient in the use of FPGA development tools. Willing to travel. Job Type: RegularShift:Shift 1 (United States of America) Primary Location:Massachusetts, United States (Remote) Additional Locations:Florida, United States (Remote), Georgia, United States (Remote), Maryland, United States (Remote), New Hampshire, United States (Remote), New Jersey, United States (Remote), New York, United States (Remote), North Carolina, United States (Remote), Pennsylvania, United States (Remote), Virginia - Remote, Washington D.C., United States (Remote) Posting Statement:All qualified applicants will receive consideration for employment without regard to race, color, religion, religious creed, sex, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, military and veteran status, marital status, pregnancy, gender, gender expression, gender identity, sexual orientation, or any other characteristic protected by local law, regulation, or ordinance.

The Semiconductor Business Unit provides solutions in pathfinding, yield learning, and failure analysis of semiconductor processes and manufacturing. Our broad range of high-performance microscopy workflows provides critical data at the micro-, nano-, and picometer scales. Combining hardware and software expertise in electron, ion, and light microscopy with deep application knowledge in semiconductor technology, the team is dedicated to the pursuit of discovery. Our employees work with companies on the forefront of semiconductor innovation as they develop and characterize the processes that will lead to the technologies of tomorrow. The Mission Our team provides technical expertise to top leading semiconductor companies developing groundbreaking products and processes using our innovative microscopy technology. The Applications team works at the intersection of the product team, the account team, and the customer to grow our business and ensure the success of our customers. Key Results are: Support for new product introductions with customers to integrate our technology into their workflows in the lab and fab for failure analysis, characterization, and metrology. Application development and training to ensure that users can extract the full value of our technology and achieve the best possible results Collaborative development of new processes and applications as the customer technologies evolve. How you will make an impact The Field Applications Engineer is the technical professional responsible for enabling our industry customers in the integration of our tools into their processes supporting the development and production of semiconductors and related technologies. What you will do Provide on-site professional technical support, primarily in Hillsboro, Oregon Develop innovative solutions to customer challenges. Support tool acceptance and new technologies on location and in coordination with the product and service teams. Develop positive relationships with our customers as the technical partner for solving their challenges, explaining our technology, and assisting with application development. Coordinate closely with internal product, engineering, marketing and account teams on product acceptance and development. Provide detailed technical feedback to the product teams on customer needs and product performance in the field. How will you get here? This position is ideal for a creative and dynamic technologist with a focus on innovation and customer happiness. As a minimum, the successful candidate will possess the following combination of education and experience: A university degree in Physics, Materials Science, Chemistry, or a related field; an advanced degree is preferred. Minimum of 5 years of hands-on experience with Transmission Electron Microscopy (TEM) equipment and applications Expert level of understanding of semiconductor processing, statistical process control, device physics, and failure analysis techniques Experience with coding or scripting (C#, Python, MATLAB, etc.) is a plus. Excellent, clear interpersonal skills and the ability to nurture positive, productive relationships with customers. Excellent problem-analysis and solving skills Ability to travel both domestically and internationally (up to 25%) and possession of a valid passport.

At ABB, we help industries outrun - leaner and cleaner. Here, progress is an expectation - for you, your team, and the world. As a global market leader, we'll give you what you need to make it happen. It won't always be easy, growing takes grit. But at ABB, you'll never run alone. Run what runs the world. This Position reports to: Sales Support Manager In this role, you'll help run what runs the world, by taking on meaningful work that drives real impact. The work model for the role is: remote (#Li-Remote) within the Houston, TX area - weekly office visits will be needed. In this role, you will be the technical lead at consulting engineer, end user, EPC and design build customers, ensuring ABB products and solutions achieve a preferred/ acceptable manufacturer status in project specifications. You will work closely with the local sales team and must be proficient applying MV/LV switchgear, switchboards, panelboards, transformers and arc flash mitigation technologies. Your role and responsibilities Technical & Customer Collaboration: Partner with consultants, end users, utilities, and EPCs to define project needs, provide design support, product selection, budgeting, and promote ABB solutions for specification inclusion. Solution Development & Expertise: Deliver comprehensive electrical solutions-including one-line diagrams, schematics, and equipment specs-for LV/MV applications; serve as the local expert on key products like switchgear, transformers, UPS, and power monitoring systems. Thought Leadership & Enablement: Lead customer education through presentations, Lunch & Learns, and industry events; contribute to whitepapers and conferences; mentor Field Application Engineers and support internal technical development. Strategic Insight & Self-Leadership: Gather customer feedback to inform product strategy, conduct risk and financial analyses, and manage time effectively across multiple stakeholders while operating independently with a strong customer-focused mindset. Our Team Dynamics Our teams support each other, collaborate, and never stop learning. Everyone brings something unique, and together we push ideas forward to solve real problems. Being part of our team means your work matters - because the progress we make here creates real impact out there. Qualifications for the role Education & Experience: Bachelor's in engineering (preferably electrical) with 8+ years of experience in electrical distribution, or a Master's with 4+ years in the same field; PE certification preferred. Technical & Industry Knowledge: Background in field, plant, or design engineering for power systems in oil & gas, utilities, or industrial sectors; familiarity with ANSI, IEEE, NEC, NEMA, NFPA 70E, and UL standards. Interpersonal & Communication Skills: Strong ability to collaborate across diverse teams, resolve technical issues, and communicate effectively in English, both written and spoken. Professional Traits: Self-motivated, results-driven, adept at multitasking, and skilled in building relationships with engineering consultants and customers. Candidates must already have work authorization that would permit them to work for ABB in the US. What's in it for you We empower you to take initiative, challenge ideas, and lead with confidence. You'll grow through meaningful work, continuous learning, and support that's tailored to your goals. Every idea you share and every action you take contributes to something bigger ABB is an Equal Employment Opportunity and Affirmative Action employer for protected Veterans and Individuals with Disabilities at ABB. All qualified applicants will receive consideration for employment without regard to their- sex (gender identity, gender expression, sexual orientation), marital status, citizenship, age, race and ethnicity, inclusive of traits historically associated with race or ethnicity, including but not limited to hair texture and protective hairstyles, color, religious creed, national origin, pregnancy, physical or mental disability, genetic information, protected Veteran status, or any other characteristic protected by federal and state law. For more information regarding your (EEO) rights as an applicant, please visit the following websites: ******************************************************************************************** As an Equal Employment Opportunity and Affirmative Action Employer for Protected Veterans and Individuals with Disabilities, applicants may request to review the plan of a particular ABB facility between the hours of 9:00 A.M. - 5:00 P.M. EST Monday through Friday by contacting an ABB HR Representative at **************. Protected Veterans and Individuals with Disabilities may request a reasonable accommodation if you are unable or limited in your ability to use or access ABB's career site as a result of your disability. You may request reasonable accommodations by calling an ABB HR Representative at ************** or by sending an email to ****************. Resumes and applications will not be accepted in this manner. While base salary is determined by things such as the successful applicant's qualifications and experience, this position is expected to pay between $116,200 and $185,920 annually and is eligible for a short-term incentive plan/annual bonus. ABB Benefit Summary for eligible US employees [excludes ABB E-mobility, Athens union, Puerto Rico] Go to MyBenefitsABB.com and click on “Candidate/Guest” to learn more Health, Life & Disability Choice between two medical plan options: A PPO plan called the Copay Plan OR a High Deductible Health Plan (with a Health Savings Account) called the High Deductible Plan. Choice between two dental plan options: Core and Core Plus Vision benefit Company paid life insurance (2X base pay) Company paid AD&D (1X base pay) Voluntary life and AD&D - 100% employee paid up to maximums Short Term Disability - up to 26 weeks - Company paid Long Term Disability - 60% of pay - Company paid. Ability to “buy-up” to 66 2/3% of pay. Supplemental benefits - 100% employee paid (Accident insurance, hospital indemnity, critical illness, pet insurance Parental Leave - up to 6 weeks Employee Assistance Program Health Advocate support resources for mental/behavioral health, general health navigation and virtual health, and infertility/adoption Employee discount program Retirement 401k Savings Plan with Company Contributions Employee Stock Acquisition Plan (ESAP) Time off ABB provides 11 paid holidays. Salaried exempt positions are provided vacation under a permissive time away policy. We value people from different backgrounds. Could this be your story? Apply today or visit *********** to read more about us and learn about the impact of our solutions across the globe.

At Amphenol Alden Products, we're passionate about making a difference. Every device we help create plays a part in improving - and even saving - lives around the world. It's a responsibility we take personally and proudly. What started as a family business over 80 years ago has grown into a global success story. Yet we've never lost the entrepreneurial spirit and close-knit culture that makes AAP a great place to work. Our people are at the heart of everything we do. We offer exceptional benefits, competitive pay, work-life balance, and opportunities to grow your career-locally and across Amphenol's global network. As we continue to expand, we're looking for driven, passionate individuals to join our team. Right now, we have an exciting opening for a Field Applications Engineer for the Western region. Summary: Position will be responsible for generating revenue through the solicitation and acquisition of orders in the West Region territory. The focus is on working collaboratively with existing and potential customers at the engineering level to understand their technical requirements and provide interconnect solutions from Amphenol Alden. Will also develop accounts to support the West Region sales team and ensure that all new business opportunities in the pipeline are explored to their fullest potential. Essential Functions: * Drive sales grow in the defined accounts and territory to achieve assigned sales goals. * Utilize strong communication skills to drive sales initiatives. * Assist the sales team in mining defined accounts for additional orders. * Develop technical expertise on products and applications to maximize sales efforts. * Communicate sales opportunities and need for further technical support. * Participate in industry trade events when needed. Required Skills/Experience: * Bachelor's degree in Electrical Engineering, Mechanical Engineering or similar. * Minimum 3 years displayed experience in providing technical customer Support. * At least 3 years of direct industry experience with the sale of electronic components for medical devices or industrial markets. * Up to 40% travel is needed, so must have the ability to travel to meet business objectives both domestically and sometimes internationally. * Must have excellent communication skills and be a structured, self-motivated person. * Position is fully remote; qualified candidates will reside in CA (preferred), AZ, or NV. What We Offer: * An opportunity to join a growing team dedicated to making a difference. * Competitive salary and bonus as well as a comprehensive benefits program, including medical, dental, vision, short and long-term disability, 401(K), PTO, HSA, FSA, employee discounts, life insurance, and employee activities. Join us at Amphenol Alden and contribute to our legacy of excellence in patient care. Apply now to be part of a company where your skills and dedication make a meaningful impact every day! Amphenol Alden Products is an Equal Opportunity Employer

Join Soitec, the world leader in engineered substrates for the semiconductor industry. We design and manufacture innovative semiconductor materials that are critical for miniaturizing chips, boosting performance, and cutting energy consumption. Our materials power the mobile, digital, automotive, and industrial revolutions, found in everything from smartphones and data centers to connected devices and electric vehicles. What does the job consist? We are seeking a highly motivated and experienced Field Application Engineer to be the primary technical liaison for our key customers across the United States. This is a critical, high-impact role that places you at the intersection of our cutting-edge substrate technology and the world's semiconductor leaders designing advanced analog, mixed-signal, power management, and RF devices. This position offers a unique chance to work across all Soitec products and markets, giving you a comprehensive overview of our business and deep involvement with our customers' most innovative applications. As a Field Application Engineer, you will serve as the expert technical consultant, customer advocate, and critical link between our customers and internal teams: Technical Leadership & Customer Interface * Primary Technical Contact: Act as the face of Soitec, owning all technical engagement with US customers, including world-leading semiconductor companies. * Product Expertise: Maintain deep knowledge of silicon processing, defects, and quality control of Soitec substrates. * Driving Adoption: Proactively communicate the technical benefits and value proposition of new and existing Soitec products to customer engineering teams and management. * Presentations & Demos: Develop and deliver technical presentations, product demonstrations, and training sessions targeted at existing and prospective customer engineers. Customer Advocacy & Project Management * Internal Voice of the Customer: Serve as the central advocate for customer technical requirements and standards within Soitec. * Cross-Functional Coordination: Coordinate technical services-liaising with Sales, Production, and Quality departments-on newly developed techniques, process improvements, and new product qualifications. * Project Execution: Coordinate engineering development samples and manage new part qualifications from initial request through final approval. * Strategic Planning: Collaborate on developing specific roadmap support plans to align Soitec's future product development with key customer needs. Quality, Risk, and Complaint Resolution * Complaint Investigation: Lead the technical investigation of customer complaints and concerns regarding product quality and performance. * Risk Assessment: Assist in the assessment of risk to customers associated with process changes and process control excursions. * Data Analysis: Conduct and present statistical analysis (SPC, Cpk) of product and process control data. Interactions & Environment * External: Primarily customers technical and quality departments. * Internal: Quality, Product Managers, and Sales teams across global sites. * Work Style: This is a remote-based position requiring regular travel for customer site visits and internal team reviews (F2F). Requirements & qualifications * Bachelor's degree in Materials Science, Physics, Engineering, Chemistry, or a closely related field. * 8+ years of significant customer support management or Field Application Engineering experience within the semiconductor industry. * Deep familiarity with silicon wafer processing, testing, and/or characterization techniques. * Demonstrated knowledge of Material Characterization methods (e.g., SEM, SIMS, GOI, XRT, C-V, SRP, TEM). * Expertise in statistical methods for process and product control (SPC, Cpk). * Exceptional verbal and written communication skills with the proven ability to present complex technical information clearly to diverse audiences. * A proactive, solutions-oriented approach to customer issues.