Production assistant full time jobs

Columbus, OH Connect Housing Blocks is currently searching for a full-time Production Associate to join their team in Columbus, Ohio. We are revolutionizing the housing industry, manufacturing multi-story, prefabricated modular apartment housing in Columbus, Ohio, by providing high-quality affordable housing. Production Associates are responsible for performing manufacturing tasks to build prefabricated component and module assemblies on the production line. What we can offer YOU: Health insurance Paid time off 401k Growth opportunities Pay: $16.00 Schedule: Monday - Thursday 7 AM - 5:30 PM In office; 3251 Westerville Rd. Columbus, Ohio 43224 The right candidate will have: High School Diploma (or GED or High School Equivalence Certificate) preferred No experience required Ability to ascend/descend ladders, stairs, scaffolding, ramps, and poles Ability to regularly move and push up to 20 pounds, occasionally move or push up to 50 pounds, and rarely move or push 200 pounds or more Our Production Associate will: Perform manufacturing of housing units, including quality checks on products and parts Review work orders and blueprints to ensure work is performed according to specifications Set up and operates machinery such as presses, pinners, hand tools, gluers, drills, etc. Rotate through all the tasks required in a particular production process Shovel, sweep, and otherwise cleans work areas Maintain production equipment and machinery Operate machinery and heavy equipment, such as forklifts Install plumbing, electrical units, and HVAC systems Install and finishes drywall Paint modules using brushes, paint sprayers, rollers, etc. Trim and cases installations Install fire alarms and fire suppression systems Install windows and doors Cold forms steel framing Install Structo-crete panels for subflooring Interested in becoming our Production Associate? Apply with a current resume today!

Cintas is seeking a Production Associate - Garment Hanger/Inspector to support the Rental Division. The Garment Hanger/Inspector is responsible for safely and accurately placing customer garments on hangers and for visually inspecting all garments to identify the need for proactive repairing, such as patching holes or tears. Garment Hanger/Inspectors are expected to maintain the cleanliness of their work area. This position is on a performance-based incentive pay structure; meaning the Garment Hanger/Inspector must meet or exceed a production standard for hanging garments, and additional compensation incentive (e.g., higher hourly pay) is tied to exceeding production standards. **Skills/Qualifications** Job Expectations and Eligibility Factors: Work Eligibility (prior to first day of employment) + Must be authorized to work in the US. + Must be 18 years of age or older. Work Expectations + Must adhere to attendance policy. + Must be willing to work in a safe proximity to other people for extended periods of time. + Must be willing to work in a fast-paced, schedule driven environment where there are time pressures to complete work quickly. Physical Qualifications, with or without reasonable accommodation: + Requires standing for most of shift. + Requires repetitive motions, stretching, bending, turning, or reaching to accomplish work activities. + May require pushing carts or bins full of bulk or linen product to station to prepare for folding. Attributes of a Great Employee-Partner: + Attention To Detail: Is thorough and careful about detail when completing work tasks or correcting flaws or mistakes. + Work Ethic / Effort: Displays a high level of effort and commitment towards performing work; is hard working and dependable; prioritizes tasks properly to meet deadlines. + Interpersonal Skills: Is pleasant with others on the job and displays a good-natured, cooperative attitude; is respectful, courteous, and polite towards others. + Teamwork and Collaboration: Works with others to achieve goals; supports team decisions. + Safety Orientation: Is committed to complying with safety rules and guidelines. How You Will Be Evaluated: The full selection process may include the following components: - Application and resume review - Interviews - Job Tryout This is not an offer of employment. The tryout provides a realistic job preview to better understand the work environment, the work activities, and the performance expectations. Candidates will be compensated for their time during the job tryout. Not all applicants will progress through the entire selection process; only those applicants identified as most qualified for the job will be invited to the next step in the process. Individuals who receive a conditional job offer will also be required to complete a background check and drug screen. Having a criminal history does not automatically disqualify candidates from employment. **Benefits** Cintas offers comprehensive and competitive medical, dental and vision benefits, with premiums below the national average. We offer flexibility with four different medical plan options; one plan is offered at zero cost. Additionally, our employee-partners enjoy: - Competitive Pay - 401(k) with Company Match/Profit Sharing/Employee Stock Ownership Plan (ESOP) - Disability, Life and AD&D Insurance, 100% Company Paid - Paid Time Off and Holidays - Skills Development, Training and Career Advancement Opportunities **Company Information** Cintas Corporation helps more than one million businesses of all types and sizes get Ready to open their doors with confidence every day by providing products and services that help keep their customers' facilities and employees clean, safe, and looking their best. With offerings including uniforms, mats, mops, towels, restroom supplies, workplace water services, first aid and safety products, eye-wash stations, safety training, fire extinguishers, sprinkler systems and alarm service, Cintas helps customers get Ready for the Workday . Headquartered in the U.S., Cincinnati, OH, Cintas is a publicly held Fortune 500 company traded over the Nasdaq Global Select Market under the symbol CTAS and is a component of both the Standard & Poor's 500 Index and Nasdaq-100 Index. Cintas Corporation is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), national origin, age, genetic information, disability, protected veteran status, or any other characteristic or category protected by local, state, or federal law. This job posting will remain open for at least five (5) days. **Job Category:** Production Hourly **Organization:** Rental **Employee Status:** Regular **Schedule:** Full Time **Shift:** 1st Shift \#INDHP

Worthington Enterprises is hiring Production Associates and Material Handlers on days and nights. These are 12 hour shifts, 6 am to 6 pm OR 6 pm to 6 am, rotating 2-2-3 schedule. Why you'll love working here: Your schedule rotates week to week, giving you every other weekend off. You'll work 3 or 4 days a week & have a 3-day weekend every other week. This means you'll only work 15 days a month. We pay for experience, but minimum starting pay is $20/hr. plus $1.50 shift differential; we also have quarterly profit sharing with no cap. Employees who work more than 40 hours per week are eligible for time and a half. Every other week 8 hours of overtime is built into your schedule. Those who work beyond 48 hours a week are eligible for double-time pay. Worthington offers health, dental & vision insurance that starts on your first day & provides an HSA contribution. We have a gym, medical center, pharmacy & barbershop on-site. Paid parental leave is offered for all regular full-time employees. As Our Philosophy states: People are our most important asset. We provide career development opportunities, training, tuition assistance and more to help you to continue to grow in your career. Responsibilities These positions are responsible for safely manufacturing quality parts on a fast-paced assembly line. Duties include a variety of tasks, including, but not limited to: Performing assembly, testing, problem-solving, material handling, welding, paint line operation, press room operation, and quality control. The goal of the Production Associate is to achieve excellence in all facets of the role; providing the highest quality service safely, while effectively and efficiently increasing profits. Desired Experience A good candidate is someone who is eager to learn and grow, shows up to work on time, and puts in a hard days' work. Our formal requirements are below: Must be able to handle physical, repetitive work and be able to stand on your feet for several hours Must have good hand-eye coordination Competent in basic math and computer skills Ability to handle small parts Ability to recognize quality issues and problems - detect defects Ability to read and follow detailed instructions on productions Ability to distinguish between part numbers and sizes Ability to count and label parts accurately Must follow all safety policies and procedures and have good safety awareness and efficiency skills Ability to follow verbal and written instructions in English. Basic English proficiency is required to read safety instructions, understand work orders, and communicate with supervisors and coworkers. Forklift and crane license a plus.

Description: The Production Associate is responsible for accurately and efficiently preparing, packing, and labeling customer orders or production materials for shipment. This role ensures all items meet company quality standards, comply with packing and labeling requirements, and are handled in accordance with safety regulations so that products arrive in excellent condition. Key Responsibilities1. Packing & Labeling Assemble and pack items according to standard operating procedures.. Apply shipping labels and documentation accurately. Ensure packages are properly sealed and protected to prevent damage in transit. 2. Quality Assurance Inspect products and packaging for defects, damage, or inaccuracies before packing. Verify the correct quantity and type of items are included in each order. Safeguard accuracy by ensuring prescription and shipping labels correspond without discrepancy Report discrepancies or quality issues promptly to a supervisor. 3. Material Handling & Inventory Support Alert production specialist to replenish packing supplies such as boxes, tape, and cushioning materials. Assist with counting, organizing, and maintaining stock as needed. 4. Workplace Organization & Safety Maintain a clean, organized, and hazard-free work area. Follow company safety policies and wear required personal protective equipment (PPE). Report accidents, injuries, or unsafe conditions immediately. Work collaboratively with co-workers to maintain efficiency and workflow. Qualifications Education: High school diploma or equivalent required. Experience: Prior warehouse or packing experience is helpful but not required (training provided). Skills & Abilities: Ability to follow written and verbal English instructions accurately. Strong attention to detail and manual dexterity. Basic reading, writing, and arithmetic skills. Basic proficiency with computer systems and digital tools relevant to daily operations. Key Essential Functions Must be able to stand for at least 8 hours at a day and up to 10 hours per day during peak periods. Must be able to lift up to 30-50 pounds. Must perform repetitive motions for an entire shift (bending, reaching, lifting, scanning labels, packing boxes). Must be able to work onsite for all scheduled shifts. Must be able to work in a warehouse environment with varying temperatures and moderate noise. Working Environment Location: On-site Schedule: Full-time May require additional availability or flexibility for escalations. Warehouse environment with potential exposure to dust, temperature fluctuations, and loud equipment. PPE is provided and required when applicable. Employment Classification Status: Full-time / Part-time / Temporary (to be determined) FLSA: Non-exempt (eligible for overtime pay) Equal Employment Opportunity (EEO) Statement Gifthealth is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. All employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, transgender status, national origin, age, disability, veteran status, or any other legally protected status. Disclaimer This job description is intended to describe the general nature and level of work being performed. It is not intended to be an exhaustive list of all responsibilities, duties, or skills required of personnel.Gifthealth reserves the right to modify job duties or descriptions at any time. Requirements:

The Production Associate is responsible for accurately and efficiently preparing, packing, and labeling customer orders or production materials for shipment. This role ensures all items meet company quality standards, comply with packing and labeling requirements, and are handled in accordance with safety regulations so that products arrive in excellent condition. Key Responsibilities1. Packing & Labeling Assemble and pack items according to standard operating procedures.. Apply shipping labels and documentation accurately. Ensure packages are properly sealed and protected to prevent damage in transit. 2. Quality Assurance Inspect products and packaging for defects, damage, or inaccuracies before packing. Verify the correct quantity and type of items are included in each order. Safeguard accuracy by ensuring prescription and shipping labels correspond without discrepancy Report discrepancies or quality issues promptly to a supervisor. 3. Material Handling & Inventory Support Alert production specialist to replenish packing supplies such as boxes, tape, and cushioning materials. Assist with counting, organizing, and maintaining stock as needed. 4. Workplace Organization & Safety Maintain a clean, organized, and hazard-free work area. Follow company safety policies and wear required personal protective equipment (PPE). Report accidents, injuries, or unsafe conditions immediately. Work collaboratively with co-workers to maintain efficiency and workflow. Qualifications Education: High school diploma or equivalent required. Experience: Prior warehouse or packing experience is helpful but not required (training provided). Skills & Abilities: Ability to follow written and verbal English instructions accurately. Strong attention to detail and manual dexterity. Basic reading, writing, and arithmetic skills. Basic proficiency with computer systems and digital tools relevant to daily operations. Key Essential Functions Must be able to stand for at least 8 hours at a day and up to 10 hours per day during peak periods. Must be able to lift up to 30-50 pounds. Must perform repetitive motions for an entire shift (bending, reaching, lifting, scanning labels, packing boxes). Must be able to work onsite for all scheduled shifts. Must be able to work in a warehouse environment with varying temperatures and moderate noise. Working Environment Location: On-site Schedule: Full-time May require additional availability or flexibility for escalations. Warehouse environment with potential exposure to dust, temperature fluctuations, and loud equipment. PPE is provided and required when applicable. Employment Classification Status: Full-time / Part-time / Temporary (to be determined) FLSA: Non-exempt (eligible for overtime pay) Equal Employment Opportunity (EEO) Statement Gifthealth is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. All employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, transgender status, national origin, age, disability, veteran status, or any other legally protected status. Disclaimer This job description is intended to describe the general nature and level of work being performed. It is not intended to be an exhaustive list of all responsibilities, duties, or skills required of personnel.Gifthealth reserves the right to modify job duties or descriptions at any time.

Hourly - Full Time OT as required 1st shift- Mon-Fri 6AM-2:30PM Key Responsibilities: Follows all safety procedures associated with machine center Prepares bottom and top sheets for units and prints load tags Responsible for unitization per customer specification Understands and participates, as required, in quality checks Work at pace set by the machine operator to achieve conformance to production schedule Reads and follows shop order instructions Troubleshoot problems throughout production run Complies with all company policies and procedures Maintains high standards of cleanliness and housekeeping in work area Requirements/Qualifications: Previous experience in a manufacturing / production environment is preferred Proven ability to work SAFELY adhering to all safety processes and policies Ability to work a flexible schedule on occasion to support operational and business needs Ability to work either individually or in a collaborative, team-oriented environment Physical Demands/Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the functions of this job with or without reasonable accommodation. The work environment characteristics described here are representative of those an employee encounters while performing the functions of this job. Physical Requirements: Must be able to lift 50 pounds on a repeatedly regular basis. Must be able to stand for 8-10 hours a day. Bend, stand, squat, twist repeatedly. Work Environment: Loud Environment that requires hearing protection Exposure to fumes or airborne particles Manufacturing facility with machinery and equipment occasionally exposed to wet and/or humid conditions; high, precarious places; toxic or caustic chemicals; extreme heat; and risk of electrical shock Fast paced environment For safety and operational efficiency, candidates must be able to read, write, and communicate effectively in English. This includes understanding safety instructions, operating procedures, and workplace signage. *Shift Differential Opportunities! About Welch Packaging: Headquartered in Elkhart, IN, Welch Packaging was started in 1985 with four employees. Since then, Welch has become one of the most dynamic independent packaging companies in the United States. Welch now has multiple sheet plants throughout the Midwest. Welch Packaging has grown from four employees to over one thousand employees. With customers at the core of our business philosophy, we have a service discipline that makes us easy to do business with. Through organic growth, strategic acquisitions, and a strong entrepreneurial spirit Welch Packaging continues to be a leader in custom packaging solutions. Welch encourages associates to serve in a variety of civic and charitable organizations. The "Welch Way" involves giving back to our communities. On an annual basis, Welch Packaging contributes to a variety of charities and higher education in the communities in which we serve. At Welch Packaging, we believe in building boxes, but we don't believe in putting our associates into them! Welch hires people who fit our business culture -- people with integrity, a commitment to customer service and a passion for success -- and we teach them the packaging business through a comprehensive individualized training and placement program. Welch looks for life-long learners committed to making a difference in the world through their work. Come grow with us! Interested candidates with strong work ethic, customer focus, and initiative to succeed in a fast paced environment are encouraged to apply! All candidates for this position are subject to an authorized background check and drug screen. The candidate must pass both to become a Welch Packaging Team Member.

RedBuilt is hiring immediately for Production Associates at our Delaware, OH facility. We offer a WORLD CLASS safety-first work environment, opportunities for growth, and great benefits! Wage Range: $21.00 to $26.50 hourly - We pay to reflect your prior applicable work experience! PLUS, earn an additional $2,000 during your first six months of employment! Industry Leading Benefits: 11 Paid Holidays, Paid Time Off, Health Benefits, 401k, PPE Reimbursement. See below for a FULL list of the benefits we offer! Shifts Available: Monday through Friday (6:00am - 2:30pm) with overtime and occasional weekends. Monday through Thursday (5:00am - 3:30pm) with overtime and occasional weekends. Don't want to Apply Online? Stop by our office on Monday through Friday between 6:00am to 2:30pm EST. We're located at 200 Colomet Drive, Delaware, OH and are excited to meet you! A Production Associate's typical day may include… Construction of wood-framed wall panels. Assembly of RedBuilt Open-Web Trusses. Setup and operation of machinery, such as a punch press, pinner, gluer, and/or drill. Setup and use of various tools such as circular saws, nail guns, and staple guns. Assembly of various construction accessories for comprehensive framing packages. Reading product design paperwork and plans. Inputting information into computers to track material and work orders. Assist with Spanish to English translation during one-on-one meetings, team meetings, interviews and New Hire onboarding What does RedBuilt do? Our Delaware manufacturing facility builds engineered wood trusses, constructs wood-framed wall panels, welds structural steel frames, and assembles job packages for delivery direct to the construction site. What do we look for in a Production Associate? We are looking for enthusiastic and reliable full-time Production Associates! Previous construction and/or production experience, preferred but not required. Knowledge, Skills, and Abilities (Minimum Qualifications) Must be safety and quality conscious and motivated to achieve excellence in both. Team player with positive attitude, help achieve department production goals. Read and understand shop details and job instructions. Ability to read a basic tape measure. Maintains excellent working relationships and has strong communication skills. Must be able to work overtime when scheduled. Must be 18 years of age. High School Diploma or GED (not required, but a plus!) Ability to work independently with minimal supervision. Must be on time and ready to work. Bilingual in English/Spanish REQUIRED Physical Demands/Work Environment Ability to occasionally lift and/or move up to 50 pounds. Ability to walk and/or stand for prolonged periods of time. Ability to occasionally bend, squat and/or stoop. Manual and finger dexterity as required to perform daily job duties. Frequently works near or around moving mechanical parts. Exposed to a high level of noise in the work environment. Exposed to airborne particles. Work environment: Wood processing, manufacturing operation. Occasionally exposed to outside weather conditions, including variations in temperature and precipitation. Work in non-climate controlled environments. Comprehensive Benefits Package: 11 Paid Holidays Paid Time Off Paid Community Service Health Benefits (Medical, Dental, Vision) FSA/HSA Options 401k Retirement Plan with Employer Matching Opportunity for bonus Paid Parental Leave Flexible Dependent Care Account Employee Assistance Program (EAP) Company Paid Basic Life and AD&D Insurance Company Paid Short Term Disability Voluntary Long-Term Disability Voluntary Life and AD&D Insurance PPE Support: We provide our associates with all basic PPE required for the job. We also have a PPE reimbursement policy to support our associates with the cost of prescription safety glasses, custom molded hearing protection, and safety boots. FLSA Classification: Non-Exempt Job Type: Full-time Work Location: Delaware, OH RedBuilt is an equal opportunity employer. Must take pre-employment drug test and a background check which includes criminal records to be considered for the position. Please note that the job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required for the Production Associate role. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. #RBPM

We are seeking a highly organized and detail-oriented Catering Production Coordinator to join our team. The ideal candidate will be responsible for coordinating and overseeing all aspects of catering production, ensuring that all events are executed flawlessly and to the highest standards. We Offer: * Shifts are primarily daytime Tuesday thru Saturday * Discounted meals and Off-Duty meal discounts * Competitive Base Pay * Paid Time Off (Requires Full Time) * Potential for Gratuity * Delivery Fees Paid according to company guidelines * Flexible Work Schedules * Paid Weekly * Opportunity for Advancement * Medical and Dental Benefits (Requires Full Time) * Matching 401(k) We'll Bring the Training - You Bring the Positive Attitude: At DiBella's, as our Catering Production Coordinator, you prepare orders and ensure our catering clients receive an accurate order each time. Additionally, you will make deliveries to catering clients, make follow up calls, do account maintenance calls, help drive new catering business into the restaurant and assist clients with placing catering orders . Teaching you how to make a great sub is easy, but we need Catering Coordinators who love their job and enjoy working with customers. We seek applicants who have experience in customer service, and in hospitality. Everyone at DiBella's learns how to make subs, but you will also be trained on our catering menu and sales procedures and delivery needs. Some Position Specifics: * Valid driver's license * Vehicle with current registration and insurance * Required frequently: standing, walking, kneeling, squatting, bending, reaching, and lifting up to 50 lbs. * Ability to read and interpret documents such as the crew handbook. * Ability to prioritize tasks, multi-task, balance friendliness with efficiency, and maintain focus. * Ability to communicate effectively with customers and co-workers. At DiBella's we work together to cultivate the best dining experience for our guest. If this sounds like the next career for you, apply now and join our crew! DiBella's Subs is an Equal Opportunity Employer. Salary Description $16-$17/hr

The Coordinator position requires a professional, organized individual with the ability to take ownership of new projects. This role requires management of multiple projects simultaneously, accuracy in daily work, and the ability to meet deadlines in a fast-paced environment. This position's duties include being responsible for leading Associates to ensure they are working in a safe manner, daily verification that all fixtures are in good working condition. Qualifications (include but are not limited to ): Strong written, verbal, and analytical skills Ability to work well with others in coordination of job tasks Record of dependability and good attendance Must work with a high degree of accuracy Must have safe forklift skills Must have strong leadership abilities and work well with all associates Duties (include but are not limited to): Shift pre-start up Identify production and shipping goals. Check emails for updates, information, or changes to PC or shipping changes. Check with PC department to follow up on any production/scheduling issues. Check for call-offs. Walk furnace lines to determine what is complete and which loads that may have been missed. Check daily shipping requirements. Start Mid shift daily production report. Identify any product that is “hot” or ships that day or the next that may need processed. Talk with previous shift/review any notes for items that may have carried over from the previous shift. Determine manpower needs to complete production schedule. Contact contract labor representative if more labor is needed, send home labor if there is an excess. Prioritize which loads need to be set to meet furnace, polishing, or blasting schedule. Utilize manpower to efficiently assign associates in order to meet customer needs. Morning meeting Cover any production, Safety, and Quality topics for that day. Provide feedback to associates as to how the day's production will be processed. Production floor Make sure roster/attendance is completed timely. Make sure any adjustments are noted on the roster such as leave earlies, Transfers, tardies, etc. Make sure setting and de-setting processes are running concurrent with PC Schedule. Make sure team leaders understand production and shipping goals. Verify that the routers are being followed completely for all product set. Make sure that all associates are reading and following router instructions. Make sure associates sign off on work started and completed. Ensure you have trained associates working with any new associates on the floor. Full time associate, seasoned contract associate or team leader. Check to make sure setting/de-setting is being performed correctly. Prioritize what is needed to de-set to meet shipping needs. Verify proper dunnage/packaging is being used. Ensure standard times are being met. Make sure associates sign off on work started and completed. Make sure loads are being checked prior to entering the ASRS or moved from setting by forklift. Make sure ASRS associate is checking for correct furnace height. Make sure ASRS operator checks paperwork is signed off. Make sure ASRS operator makes sure load is squared up and able to be put away. Make sure ASRS operator checks for proper base tray. If load is being moved to furnace area by forklift make sure it is proper height and on proper base tray. Preventative maintenance. Ensure that all PM charts are completed as designed. Review each PM chart daily. If there is an item that needs attention fill out and complete a maintenance work order and notate it on the chart. Daily Responsibilities. Answer associate questions as needed. If you don't have the answer, ask your manager, PC, Maintenance etc. Walk production area to help maintain high 5's standards. Make sure that all areas are clean throughout the work day. Clean up messes as they happen to ensure a safe environment. Make sure daily layered process audits are being completed. Be aware of any trial parts being processed. Check with engineering prior to setting any trial parts/loads. Verify proper process for setting or de-setting trial parts/loads. Communicate with your team any special instructions. Oversee instructions and be present for processing trial parts. Check PC charts hourly to ensure blaster/polisher schedule are being maintained. Check PC charts to ensure setting schedules are being completed properly. Identify those loads that need to be completed for shipment the next day. Check with PC if you have concerns re-guarding schedule or added product or unable to complete a setting assignment due to fixtures, furnace delays etc. Make sure that any equipment that is not functioning properly has a work order assigned to it. If the equipment creates an unsafe condition, lock this out or do not use. Contact maintenance department immediately. Contact manager/supervisor. Review any hold sheet and hold tags to ensure they are written up properly. Provide as much information as possible. Hold tags are for smaller amounts of non-conforming material. Hold sheets are for when the entire load is suspect and cannot be processed. Make sure ALL loads placed in the hold area have a hold sheet or hold tag (no exceptions) Safety Make sure any safety incidents are reported immediately. Make sure incident reports are filled out correctly. Be sure to use the proper forms for reporting incidents and witness statements. If damaged parts, parts property, or injury are involved send individual(s) for drug screen. Know which paperwork (if any) needs to go with associated and what location to send them. Know fire, Tornado, active shooter, and injury procedures. Know where HMDS documentation is located. Understand HMDS labeling and where it needed throughout the plant. Identify potential hazards on the production floor and correct accordingly. Make sure associates are using proper PPE when performing various tasks. Make sure they are maintaining safety glasses and wearing steel toe shoes at all times in the plant. Perform weekly spot checks as needed. When a process calls for specific PPE to complete a process, make sure associates are following all PPE requirements. Help drive process improvements. Identify possible Process improvements in your areas. Complete Kaizen/process improvement sheets to help improve efficiency and cost as you find them. End of shift duties Make sure all loads that have been completed and placed in ASRS. Any loads that need completed from your shift are set up and ready to be processed. Inform in coming shift of any loads that are waiting to enter the ASRS. Inform in coming shift of any loads that where missed that need to be picked up. Make sure to communicate with incoming shift any issues that may affect production. Make sure that any instructions, needs or issues that will carry over to the next shift are communicated fully to prevent negative impact on the incoming shift. PC charts are completed, up to date and signed off. 5's Make sure work areas are free of debris and parts. Make sure all areas are clean and free of any trip hazards. This includes trash is taken out and boxes/cardboard are removed from area and placed in proper bins. Make sure all tools and any other items needed for production are put away and stored properly. Make sure team leaders utilize associates efficiently when performing tasks such as painting, sorting, and general cleaning. Perform daily shift report Finish daily production report. Identify any quality, shipping, maintenance, and labor issues for the shift. Make sure team leaders complete labor analysis sheet. Email this to the designated managers. Make sure that team leaders complete paperwork such as PC charts, setting de-setting etc. and hand in to production manager. Benefits include: 401(k) retirement plan with company match Paid Time Off (PTO) Profit-sharing program Health, dental, and vision insurance Company holidays

Production Associate Bodycote offers: $1,500 sign-on retention bonus! Paid Holiday and paid time off. 401k with a match. Medical, Dental, and Vision plans for employees and families. Must pass a pre-employment drug screen. Ability to work full-time, 40+ hours per week. Due to the nature of our business and a heavy industrial market, Bodycote deems this position to be safety-sensitive. Summary: Performs essential job functions as directed under close supervision. Essential Job Functions (Duties and Responsibilities): The primary duties consist of, but are not limited to, the following. Prepares work for processing, including cleaning, wiring, fixturing, etc. Loads and unloads furnaces, bins, fixtures, baskets, etc. Stacks/loads parts in customer bins or containers. Immediately brings any unusual problem, irregularity, or concern to the Heat Treater, Foreman/Lead Person, or management. Practices and promotes safety and good housekeeping. Performs other tasks as assigned or dictated by position. This position is responsible for the care and treatment of our customers' inventory and, as such, will perform duties safely and responsibly to prevent customer loss or damage. Must have the ability to report for work on time, follow directions, interact effectively with co-workers, understand and follow rules and procedures, and accept constructive criticism. This position will allow for cross-training and the development of additional skills. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position must satisfy ITAR compliance requirements; therefore, candidates must be U.S. Citizens or Permanent Resident cardholders. Education - High school diploma or equivalent. Must have knowledge of basic math. May be required to work overtime. Must be able to obtain and maintain forklift operation certification. Must demonstrate the ability to read, write, and communicate in the English language. Physical & Mental Demands: The following physical and mental demands consist of, but are not limited to, the following. Must be able to work in a standing position for extended periods of time in an industrial environment. Manual dexterity to perform data entry functions. Ability to bend, pull, stoop, and reach to perform functions. Ability to lift up to 50 lbs. May be exposed to heat, fumes, noise, and humidity, etc. Must have the cognitive and mental capacity to perform essential job functions. Must be able to communicate effectively orally and in writing. The statements herein are intended to describe the general nature and levels of the work performed by employees, but are not a complete list of responsibilities, duties, and skills required of personnel so classified. Furthermore, the job description does not constitute a written or implied contract for employment. Bodycote reserves the right to revise or change job duties and responsibilities as the need arises. Bodycote is an Equal Opportunity Employer and does not discriminate against current and prospective employees based on race, religious creed, color, national origin, ancestry, physical disability, mental disability, medical condition, genetic information, marital status, sex, gender, gender identity, gender expression, age for individuals over forty years of age, military and veteran status, sexual orientation, or any other basis protected by applicable federal, state and local laws.

Production Coordinator Shift: First Shift This is a permanent opportunity with one of our customers in Springfield, Ohio. We are seeking a professional and highly organized Production Coordinator to take ownership of new and ongoing projects in a fast-paced manufacturing environment. This role requires the ability to manage multiple responsibilities simultaneously while maintaining a high level of accuracy and meeting daily deadlines. The Coordinator will provide hands-on leadership, ensuring associates are operating safely and efficiently. Daily responsibilities include verifying that all fixtures are functioning properly and supporting overall production flow. Key Responsibilities: Lead and support associates to promote a safe and productive work environment Oversee and manage multiple projects with a focus on accuracy and timeliness Perform daily checks to ensure all fixtures and equipment are in proper working condition Collaborate across departments to ensure smooth coordination of tasks Qualifications: Strong written, verbal, and analytical communication skills Proven ability to coordinate effectively with team members Demonstrated dependability and strong attendance record High attention to detail and commitment to accuracy Certified or demonstrated safe forklift operation skills Strong leadership skills with the ability to work collaboratively across all levels of the organization Job Type: Full-time Benefits: 401(k) 401(k) matching Dental insurance Health insurance Life insurance Paid time off Vision insurance Work Location: In person

Do you enjoy working with your hands, and breaking the boundaries of the traditional office job? Are you interested in a career with a family-owned company that is founded on growth, stability, and the idea that "nothing is impossible"? 84 Lumber is hiring immediately and has the career for you! WHO IS 84? 84 Lumber is the nation's largest privately held supplier of building materials, manufactured components and industry-leading services for single and multi-family residences and commercial buildings. With over 310 facilities and plans for even more locations, the opportunities to learn and grow with the company are endless. 84 Lumber is always looking for future leaders and takes pride in promoting nearly 100% from within. You can control your own destiny at 84 Lumber. If you invest in yourself, we will invest in you! FULL SUITE OF BENEFITS! * PTO, sick and personal days * Medical, Dental and Vision Insurance * Holiday pay * FSA medical and dependent care * Annual profit sharing and 401(k) with employer match (decided each year based on company profits) * Employee discounts and more! The full-time Yard Associate will act as a material handler and forklift operator to build loads for deliveries while maintaining a safe, clean and well-organized lumber yard and warehouse. Duties include: Building loads for delivery and unloading freight including lumber and building supplies Forklift training, certification, and operation Communicating delays or discrepancies with management Maintaining lumber yard and warehouse Other duties as assigned Responsibilities Ability to read and comprehend simple instructions, short correspondence and memos; write simple correspondence; effectively present information to others one-on-one Must be able to periodically lift up to 80 pounds High school diploma or general education degree (GED) Qualifications High school diploma or general education degree (GED) 84 Lumber Company is an affirmative action and equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. 84 Lumber Company is committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation to participate in the job application or interview process, contact ***********************. High school diploma or general education degree (GED) 84 Lumber Company is an affirmative action and equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. 84 Lumber Company is committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation to participate in the job application or interview process, contact ***********************. Ability to read and comprehend simple instructions, short correspondence and memos; write simple correspondence; effectively present information to others one-on-one Must be able to periodically lift up to 80 pounds High school diploma or general education degree (GED)

At WillowWood Global, we are proud to be a leading innovator in prosthetic solutions, helping amputees regain mobility and independence. We're seeking a dedicated and reliable Production Associate to join our liner manufacturing team. If you take pride in producing high-quality work and enjoy being part of a team, we'd love to meet you. Why You'll Thrive Here: * Consistent Schedule: Full-time, first shift (Monday - Friday, ends at 3:30pm) * Clean, Safe Environment: Temperature-controlled and safety-first facility * Rewarding Pay Structure: Competitive pay, overtime, monthly bonuses, and annual raises * Comprehensive Benefits: Paid time off and full medical coverage * Perks: Onsite fitness center, walking path, volleyball, pickleball, basketball, disc golf, fishing pond * Weekly Appreciation: Enjoy company-paid food trucks twice a week * Room to Grow: Cross-training opportunities available within the department Your Responsibilities: * Operate and maintain production machinery with care and consistency * Adhere to detailed work instructions and strict quality standards * Conduct visual and manual inspections to ensure product excellence * Keep your workspace clean, organized, and safe * Follow all safety guidelines and company procedures * Work closely with teammates to meet and exceed daily production goals * Accurately record and report production data What We're Looking For: * High school diploma or GED required * Prior experience in manufacturing or production is helpful * Commitment to reliability-punctuality and attendance are essential * Keen eye for detail and strong quality mindset * Comfortable using basic measuring tools and performing simple math * Team-oriented with strong communication skills and a positive attitude WillowWood Global is an Equal Opportunity Employer.

Physical Requirements: Must be able to lift up to 40 lbs. repetitively. Must be able to stand stationary on concrete for long periods of time. Pushing and pulling containers of parts Mental concentration to insure quality products are packed and rejects are disposed of properly. Ability to read work standards and complete written work records daily. Climb steps and ladders and/or stand on platform working in press area. Interested candidates must be comfortable in a manufacturing setting, committed to work safely as part of the production team, take pride in producing high quality parts, be committed to coming to work every day scheduled, and be willing to learn as they grow with the company. We have openings on: 2 nd shift Full Time Shift start between 3pm and 3:30pm depending on department assignment. Overtime is required as production needs. Starting wage between $15.86 and $17.61 hr. depending on job assignment with set increases every six months.

Apply Description Johnson Welded Products is a part of the Tramec family, which has facilities located throughout the United States. Along with competitive pay and a bonus program, we offer medical & RX, dental, vision, company paid life insurance, company matching 401(k), paid vacations, 10 paid holiday's, gym credit, $500 referral bonus, company paid uniforms, RX safety glasses program, work boot program, tuition reimbursement, internal training opportunities, plus much more! Overview: We are seeking a dedicated Production Associate to join our team. The ideal candidate will have experience with some or all of the following, hand tools, warehouse operations, assembly, forklift operation, power tools, mechanical knowledge, and fabrication. Duties: - Assemble components accurately and efficiently - Operate hand and power tools to fabricate parts - Utilize mechanical knowledge to troubleshoot issues - Work in a warehouse setting to manage inventory and materials - Safely operate forklifts to transport materials within the facility Experience: - Previous experience in a production or manufacturing environment preferred - Proficiency with hand tools and power tools - Familiarity with warehouse operations and inventory management - Ability to read and interpret blueprints or technical drawings - Experience with fabrication and mechanical assembly techniques Joining our team offers the opportunity to work in a dynamic environment where your skills will be valued. If you are a motivated individual with the required experience, we encourage you to apply for this position. Job Types: Full-time, Part-time Pay: $20.00 per hour Expected hours: 40 - 50 per week Benefits: 401(k) 401(k) matching Dental insurance Health insurance Life insurance On-the-job training Opportunities for advancement Paid time off Prescription drug insurance $500 Referral program Tuition reimbursement Vision insurance Schedule: 10 hour shift 8 hour shift Monday to Friday Overtime Supplemental pay types: Double time pay Overtime pay Johnson Welded Products is an Equal Opportunity Employer. We participate in E-Verify. All individuals, upon an offer of employment, will be required to submit to a drug screen. Our Drug Free Workplace program follows the Federal guidelines (marijuana or medical marijuana are not permitted). #ZR

Job Description Production Associate Positions starting at $18.25+ Shift Premiums 1st, 3rd, and Weekend Shifts Available Mount Vernon, OH Temp to Hire Why You'll Love This Job: Opportunity for full-time hire with great benefits, including: Tuition reimbursement and student debt relief Quarterly profit-sharing bonuses 401(k) with 100% company match (up to 6%) Paid training and company-provided tools Annual safety boot stipend Generous PTO and paid holidays What We're Looking For: Team players eager to learn new skills Must be 18 years or older Ability to pass a background check and drug screen High school diploma or GED required Apply Today! Upload your resume - no cover letter required. Our recruiters will review applications quickly and help connect you to this role and other opportunities. About Dawson Dawson is a trusted staffing partner in Central Ohio. We help job seekers grow their careers with fast feedback, personalized support, and access to multiple employers through one application. #ZR #INDWAR

Job DescriptionSalary: Based on Experience IEG Plastics is a proud supplier of plastic parts and assemblies to the automotive and consumer goods industries. IEG utilizes state-of-the-art facilities and equipment to provide the highest quality precision plastic parts and assemblies to our customers. Department: Production Supervisor: Production Manager Position Title: Production Coordinator Pay Rate:Based on experience Work Shift: 1st Shift Hours: 40 hours per week. Overtime as required. Overview The Production Coordinator at IEG Plastics plays a key role in planning, organizing, and monitoring production operations to ensure products are manufactured and delivered on time and to customer specifications. This position works closely with production, shipping, materials, and customer service teams to balance workflow, manage resources, and maintain smooth daily operations. The Production Coordinator serves as a central communication point between customers, plant management, and internal departments. This role involves reviewing production capacity, monitoring material and container readiness, and coordinating adjustments to meet customer requirements. The ideal candidate is detail-oriented, organized, and proactive in identifying and resolving scheduling or supply challenges in a fast-paced manufacturing environment. Key Responsibilities Coordinate all production orders for the shop floor, including primary and secondary operations. Process sales orders and schedule production based on departmental capacity. Monitor and adjust production schedules as needed to ensure on-time delivery. Work closely with production, shipping, and warehouse teams to ensure all materials and resources are available to support scheduled production. Collaborate with warehouse team on monthly inventory. Partner with plant management to address issues impacting production or delivery schedules. Print and distribute tickets, placards, labels, and other documentation related to scheduling and shipping. Serve as the primary point of contact for key buyers. Perform daily and weekly material level checks; review purchase orders and adjust timing as needed based on inventory and demand. Collaborate with the warehouse team to ensure returnable container targets are met to support production. Conduct daily schedule reviews to identify potential issues caused by material shortages, container availability, press downtime, or mold maintenance. Communicate proactively with internal teams and customers regarding any schedule changes or production impacts. Knowledge, Skills & Abilities Strong computer skills, including proficiency in Excel, Word, PowerPoint, and Outlook. Excellent organizational and time management skills. Effective communication and interpersonal abilities across all levels of the organization. Strong analytical and problem-solving skills with high attention to detail. Ability to handle sensitive and confidential information with discretion. Capable of documenting and improving workflow processes. Cross-trained in shipping, receiving, and inventory functions. Self-motivated with the ability to work independently and collaboratively. Qualifications Education: High School Diploma or equivalent (required) Experience: Production scheduling or coordination: 1+ year (required) Production planning: 1+ year (required) ERP system experience: 1+ year (required) IQMS preferred Manufacturing environment: 1+ year (preferred) Shipping/receiving experience: 1+ year (preferred) Preferred Systems Experience: EDICT (Automotive EC): ASN/Label Management Redwood Portal: Shipping Portal eSP: Supplier Portal Ideal Candidate Profile Dependable: Reliable, consistent, and accountable. People-Oriented: Enjoys collaboration and teamwork. Detail-Oriented: Focused on accuracy and process control. Achievement-Driven: Motivated by goals and continuous improvement. Independent: Capable of working effectively with minimal supervision.

Columbus, OH Connect Housing Blocks is currently searching for a full-time Production Associate to join their team in Columbus, Ohio. We are revolutionizing the housing industry, manufacturing multi-story, prefabricated modular apartment housing in Columbus, Ohio, by providing high-quality affordable housing. Production Associates are responsible for performing manufacturing tasks to build prefabricated component and module assemblies on the production line. What we can offer YOU: Health insurance Paid time off 401k Growth opportunities Pay: $16.00/hour ( Shift differential Saturday and Sunday) Schedule: Thursday-Sunday 7am to 7:30pm EST Qualifications & Competencies: High School Diploma (or GED or High School Equivalence Certificate) preferred No experience required Attendance/Punctuality - Arrives at work at the scheduled time and completes the entirety of the shift. Performs timekeeping via the timeclock to accurately record arrival times, break times, and end times Teamwork - Practices attentive and active listening. Has patience to hear people out and can accurately restate the opinions of others even when he or she disagrees. Provides the information people need to know how to do their jobs and to feel good about being a member of the team. Active Listening - Gives full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times. Critical Thinking - Uses logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems. Dependability - Is able to be trusted or relied upon to act in the way required or expected. Care and Use of Equipment - Performs all maintenance and operations checks of job-related equipment. Safety- Is safety conscious about the work environment and equipment. The work area is free of debris to prevent trip and slip hazards. All products and equipment are stored in its proper location. All safety guards and other safety devices are in its proper location, are functional, and utilized effectively on a consistent basis. Standard operating procedures, safety work rules and good general manufacturing practices are followed on a daily basis. Our Production Associate will: Performs basic production tasks in support of manufacturing housing modules. Follow work orders and blueprints to ensure tasks are completed to specifications. Sets up and operates hand tools and drills. Rotates through all the tasks required in a particular production process. Shovels, sweeps, and otherwise cleans work areas. Complies with all safety policies, procedures, and standards Reports all issues to production management. Assists, participates, and engages in company assigned trainings. Physical Demands: While performing the duties of this job, the individual positions oneself to move about the work site; ascend/descend ladders, stairs, scaffolding, ramps, and poles. The individual may operate motorized equipment and machines. The individual needs to regularly move about on the production floor to transport parts, access tools, equipment, parts, and other necessary items to complete the work. The individual frequently positions self to operate and repair machines, including underneath and above the machine. Most of the activities involve fine and gross manipulation of items. They must be able to exchange accurate information with other individuals in the office and production floor. Must be able to detect mechanical issues and part defects from short and long distances to determine what action needs to be taken. The employee must regularly move and push up to 20 pounds, occasionally move or push up to 50 pounds, and rarely move or push 200 pounds or more. The physical demands described here are representative of those that must be met by an individual to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work Environment: While performing the duties of this job, the individual is constantly exposed to various conditions which include wet and/or humid conditions and hot and/or cold temperatures. The noise level in the work environment is usually moderate but can be high at times. The work environment characteristics described here are representative of those that an individual encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Individuals are required to wear personal protective equipment as situations dictate on various job and construction sites and due to exposure of machinery and electrical currents. During warmer months, the required personal protective equipment may cause the employee to be very warm while working. The individual will be exposed to loud machinery or equipment. Interested in becoming our Production Associate? Apply with a current resume today!

RedBuilt is hiring immediately for Production Associates at our Delaware, OH facility. We offer a WORLD CLASS safety-first work environment, opportunities for growth, and great benefits! Wage Range: $21.00 to $26.50 hourly - We pay to reflect your prior applicable work experience! PLUS, earn an additional $2,000 during your first six months of employment! Industry Leading Benefits: 11 Paid Holidays, Paid Time Off, Health Benefits, 401k, PPE Reimbursement. See below for a FULL list of the benefits we offer! Shifts Available: Monday through Friday (6:00am - 2:30pm) with overtime and occasional weekends. Monday through Thursday (5:00am - 3:30pm) with overtime and occasional weekends. Don't want to Apply Online? Stop by our office on Monday through Friday between 6:00am to 2:30pm EST. We're located at 200 Colomet Drive, Delaware, OH and are excited to meet you! A Production Associate's typical day may include… Construction of wood-framed wall panels. Assembly of RedBuilt Open-Web Trusses. Setup and operation of machinery, such as a punch press, pinner, gluer, and/or drill. Setup and use of various tools such as circular saws, nail guns, and staple guns. Assembly of various construction accessories for comprehensive framing packages. Reading product design paperwork and plans. Inputting information into computers to track material and work orders. Assist with Spanish to English translation during one-on-one meetings, team meetings, interviews and New Hire onboarding What does RedBuilt do? Our Delaware manufacturing facility builds engineered wood trusses, constructs wood-framed wall panels, welds structural steel frames, and assembles job packages for delivery direct to the construction site. What do we look for in a Production Associate? We are looking for enthusiastic and reliable full-time Production Associates! Previous construction and/or production experience, preferred but not required. Knowledge, Skills, and Abilities (Minimum Qualifications) Must be safety and quality conscious and motivated to achieve excellence in both. Team player with positive attitude, help achieve department production goals. Read and understand shop details and job instructions. Ability to read a basic tape measure. Maintains excellent working relationships and has strong communication skills. Must be able to work overtime when scheduled. Must be 18 years of age. High School Diploma or GED (not required, but a plus!) Ability to work independently with minimal supervision. Must be on time and ready to work. Bilingual in English/Spanish REQUIRED Physical Demands/Work Environment Ability to occasionally lift and/or move up to 50 pounds. Ability to walk and/or stand for prolonged periods of time. Ability to occasionally bend, squat and/or stoop. Manual and finger dexterity as required to perform daily job duties. Frequently works near or around moving mechanical parts. Exposed to a high level of noise in the work environment. Exposed to airborne particles. Work environment: Wood processing, manufacturing operation. Occasionally exposed to outside weather conditions, including variations in temperature and precipitation. Work in non-climate controlled environments. Comprehensive Benefits Package: 11 Paid Holidays Paid Time Off Paid Community Service Health Benefits (Medical, Dental, Vision) FSA/HSA Options 401k Retirement Plan with Employer Matching Opportunity for bonus Paid Parental Leave Flexible Dependent Care Account Employee Assistance Program (EAP) Company Paid Basic Life and AD&D Insurance Company Paid Short Term Disability Voluntary Long-Term Disability Voluntary Life and AD&D Insurance PPE Support: We provide our associates with all basic PPE required for the job. We also have a PPE reimbursement policy to support our associates with the cost of prescription safety glasses, custom molded hearing protection, and safety boots. FLSA Classification: Non-Exempt Job Type: Full-time Work Location: Delaware, OH RedBuilt is an equal opportunity employer. Must take pre-employment drug test and a background check which includes criminal records to be considered for the position. Please note that the job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required for the Production Associate role. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. #RBPM