Production associate jobs in Brandon, FL - 328 jobs

Leeds Professional Resources is working with a client in the Oldsmar area that is looking for a second shift (3pm-11pm) Production Supervisor. Essential Functions: Manage the day-to-day activities of the manufacturing process to ensure that safety and quality practices are maximized. Manage the employment and training of production staff, to include evaluation and motivation to achieve peak productivity. Manage the process flow of products, to include scheduling runs, to maximize the production capability. Work with team to continually improve processes within department. Develop and oversee implementation and administration of department policies, systems and procedures. Resolves conflict on the floor and will perform all written warnings. Collects performance data and prepares reports for management. Holds shift operators responsible for department standards and company policies. Responsible for conducting interviews, performance reviews, and work schedules. Capable of reading customer drawings and following specifications on them. Previous Work Experience: Yellow Belt/Lean Six Sigma or other continuous improvement certification is required. Green belt is preferred. Five years of quality control or manufacturing experience is preferred. Previous experience in machine troubleshooting is preferred. This position requires on-the-job training.

This person will be responsible for: Supervise, lead, and inspect work progress from crews in accordance with jobsite safety, schedules, and requirements, Assist in screening/filtering applicants and hiring workforce personnel, Train and enforce safety and regulatory compliance, Execute quality control and attend worksite inspections, Read specifications and blueprints to direct crews safely and efficiently, Work with jobsite field personnel. Job Requirements: Strong communication (verbal & email) skills, Strong organizational skills, Problem resolution and the ability to quickly find solutions, Experience in multi-family and/or commercial construction preferred, Ability to assist with leading a workforce of 50+ technicians to produce quality workmanship, Knowledge of blueprints, Ability to work outdoors, Travel as needed, Full time position, hours vary, Insulation, Drywall or similar experience would be helpful, Clean driving record, Light duty labor, standing at jobsites required.

Job DescriptionDescription: The Warehouse Tech is responsible for the pulling of product on a day-to-day basis. Responsible for the loading and unloading of product to and from vendors/delivery trucks. Maintain a clean and organized work area, with keeping aisles clear and labeled. Responsible for product knowledge and internal codes used to distinguish between items. Able to work as a team to get each job completed in a timely manner to ensure it gets into the production team when they require it for the next build. Requirements: Warehouse Tech Essential Functions: • Responsible for having a higher level of product knowledge • Accountable for quality control on all parts before being brought to production • Ensures all counts on parts received from a vendor, or on work orders match the quantities specified • Places all product for a specific build in the prep area • Inspect raw materials used in the production of JL Marine products • Organize the warehouse by labeling and consolidating pallets, and ensure all like parts are stored together • Maintain a clean and clear work area • Maintain inventory counts when called upon • Clear out/set-up production area to ensure parts are taken out and counted, and new product is pulled in for them to begin the next build required Educational/Experience Requirement: • Less than high school education; or up to one month related experience or training; equivalent combination. • High school diploma or GED; or 1-3 months related experience and/or training; equivalent combination, preferred Machine and Tools to be Used • Forklift • Pallet Jack Knowledge, Skills and Abilities (KSAs): • Critical Thinking-Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. • Active Listening-Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times. • Monitoring-Monitoring/Assessing performance of yourself, other individuals, or organizations to make improvements or take corrective action. • Coordination-Adjusting actions in relation to others' actions. • Active Learning-Understanding the implications of new information for both current and future problem-solving and decision-making. • Social Perceptiveness-Being aware of others' reactions and understanding why they react as they do. • Service Orientation-Actively looking for ways to help people. • Learning Strategies-Selecting and using training/instructional methods and procedures appropriate for the situation when learning or teaching new things. • Time Management-Managing one's own time and the time of others. • Operation and Control-Controlling operations of equipment or systems. • Quality Control Analysis-Conducting tests and inspections of products, services, or processes to evaluate quality or performance. Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills: Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. Problem Solving Ability: Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Computer Skills: Basic personal computer skills Working Hours: 7:00 AM to 4:00 PM Monday through Friday, with a 1 hour lunch. Working Conditions/Physical Demands of the Job: The work environment characteristics described here are representative of those typical in a warehouse environment. The noise level in the work environment is usually moderate to loud, including the sounds of forklifts and tools. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands and fingers to handle or feel; and reach with hands and arms. The employee must frequently lift and/or move up to 50 pounds. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

As an Associate Assembler at GE Aviation Systems LLC, you will be responsible for the assembly of aircraft components and systems following established procedures and quality standards. This role operates on the 2nd shift, contributing to the timely production of high-quality aerospace parts. Job Responsibilities * Perform assembly operations on various aircraft components and sub-assemblies according to blueprints, work instructions, and engineering specifications. * Utilize hand tools, power tools, and specialized equipment to assemble parts with precision and accuracy. * Inspect assembled components for defects, ensuring compliance with quality standards and specifications. * Complete necessary documentation, including work orders, inspection reports, and production logs. * Adhere to all safety protocols and company policies to maintain a safe working environment. * Collaborate with team members and supervisors to troubleshoot issues and optimize assembly processes. * Maintain a clean and organized work area. * Participate in continuous improvement initiatives and training programs. Job Qualifications * High School Diploma or GED equivalent. * Previous experience in manufacturing or assembly preferred, ideally in an aerospace or precision manufacturing environment. * Ability to read and interpret blueprints, schematics, and work instructions. * Strong attention to detail and manual dexterity. * Basic understanding of quality control principles. * Ability to work effectively in a team-oriented manufacturing environment. * Must be able to work the 2nd shift (typically afternoon/evening hours). * Physical ability to stand for extended periods, lift up to 30 pounds, and perform repetitive tasks. * Basic computer skills for data entry and documentation. **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Company: AkzoNobel About AkzoNobel Since 1792, we've been supplying the innovative paints and coatings that help to color people's lives and protect what matters most. Our world class portfolio of brands - including Dulux, International, Sikkens and Interpon - is trusted by customers around the globe. We're active in more than 150 countries and use our expertise to sustain and enhance the fabric of everyday life. Because we believe every surface is an opportunity. It's what you'd expect from a pioneering and long-established paints company that's dedicated to providing sustainable solutions and preserving the best of what we have today - while creating an even better tomorrow. Let's paint the future together. For more information please visit ***************** 2024 Akzo Nobel N.V. All rights reserved. Job Purpose Executes assigned production tasks in accordance with procedures, to ensure right levels of HSE, Quality, Service and costs. Key Responsibilities * Performs daily tasks, processes data collection and administration tasks as per procedures and control systems. * Reports safety, quality, or other issues related to products or warehouse processes to the Team Leader / Warehouse Supervisor / Warehouse Manager. * Ensures all warehouse targets are met while ensuring the appropriate quality standards are maintained. * Use SAP to keep warehouse inventory updated and accurate. * Provide updates by email and SAP reports to the management team. * Appropriately addresses human resources issues, such as attendance or discipline * Advises/trains employees on care and preservation of items received, stored, and shipped * Supervise employees to ensure breaks and lunches are taken at the required time * Responsibilities include positively training and coaching employees positively * Ensure orders are picked, checked, and packed accurately and in a timely fashion * Perform inventory counts as directed and make adjustments when needed and authorized * Monitor compliance with safety and security procedures * Attend meetings, workshops, and training as directed * Ensure HSE training and responsibilities are completed as expected * Delegate warehouse housekeeping duties and ensure they are performed daily * Maintain compliance in all areas pertaining to Federal and State regulatory agencies * Proficiently use SAP to ship, receive, and monitor inventory transactions * Implement and maintain operational discipline throughout operations within the team * Coordinate and assign priorities and tasks to operators and ensure completion * Actively engage the team in HSE participation and ALPS improvements Job Requirements * Ability to read, comprehend, and follow safety instructions and safety guidelines * Ability to pass the forklift test and obtain forklift certification * Ability to operate a forklift, following all operating instructions effectively and efficiently * Ability to read and apply accurate labels * Ability to measure and weigh accurately * Ability to lift and handle containers such as 5-gallon pails up to 75 lbs, 60 lb bags of pigment or maneuvering drums up to 600 lbs * Must have effective interpersonal skills * High School Diploma * Prior experience working in a paint manufacturing facility is preferred * Prior manufacturing experience * English Speaking * Microsoft basic skills preferred Total Compensation * The hourly range for these skills is: $18.50/hr. + 3% Annual Bonus * 401 (k) retirement savings with 6% company match * Medical insurance with HSA * Dental, Vision, Life, and AD&D benefits * Generous vacation, sick, and holiday pay * Progression (pay-for-skill) pay plans. * Short- & Long-term disability * Paid Parental leave. * Career growth opportunities * Active Diversity & Inclusion Networks * Employee referral plan * Employee appreciation days At AkzoNobel we are highly committed to ensuring an inclusive and respectful workplace where all employees can be their best self. We strive to embrace diversity in a context of tolerance. Our talent acquisition process plays an integral part in this journey, as setting the foundations for a diverse environment. For this reason we train and educate on the implications of our Unconscious Bias in order for our TA and hiring managers to be mindful of them and take corrective actions when applicable. In our organization, all qualified applicants receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age or disability. #LI-HE1 REQ ID# 51028

The Production Technician is responsible for safely handling customer's cylinders in compliance with standard operating procedures. This position reports directly to the Area Lead and Plant/Department Manager. Training is provided to ensure complete understanding of position and department responsibilities. Essential Functions Understands hazards of various gases and size and contents of cylinders. Properly perform inspections of cylinders. Properly and safely handle cylinders. Required for All Jobs Performs other duties as assigned Complies with all policies and standards Work Experience - 0-1 years - High School Diploma/GED Knowledge, Skills and Abilities Strong level of attention to detail. Basic computer skills. Ability to read and comprehend English. Ability to work independently and under some pressure to meet deadlines. Must be able to read and write and perform mathematical exercises. Must be able to work with a wide variety of people with different personalities Able to work extended shifts and/or weekends Physical Demands/Working Conditions Able to work in a non-climate controlled environment. Must be able to roll or lift 75 lb cylinders. Able to stand for extended periods of time Physical Demands A thorough completion of this section is needed for compliance with legal standards such as the Americans with Disabilities Act. The physical requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Travel Requirements - None Mental Demands Math - Frequently Reading Comprehension - Constantly Safety Awareness - Constantly PHYSICAL DEMANDS/WORKING CONDITIONS Stationary Position - Frequently Move/Traverse - Frequently Stationary Position/Seated - Rarely Transport/Lifting - Frequently 50 lbs Transport/Carrying - Frequently 50 lbs Exerting Force/Pushing - Frequently 200 lbs Exerting Force/Pulling - Rarely 200 lbs Ascend/Descend - Occasionally Balancing - Frequently Position Self/Stooping - Frequently Position Self/Kneeling - Frequently Position Self/Crouching -Occasionally Position Self/Crawling - Rarely Reaching - Rarely Handling - Constantly Grasping - Constantly Feeling - Constantly Communicate/Talking -Frequently Communicate/Hearing -Frequently Repetitive Motions - Constantly Coordination - Constantly Matheson is an Equal Opportunity Employer that complies with the laws and regulations set forth under EEOC. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. EOE AA M/F/VET/Disability

Be a part of an innovative team and culture… Walt Disney Imagineering is the creative force that imagines, designs and brings to life all Disney theme parks, resorts, attractions and cruise ships worldwide. Working across a spectrum of disciplines that range from creative and conceptual to scientific and technical, Imagineers blend an innovative mixture of storytelling, art, science and technology to create immersive experiences, memorable destinations, and innovative entertainment for families around the globe. The approximate date of this internship is May/June 2026 to December 2026 and will be located in Orlando, FL. What You Will Do Prepare, under supervision, project specific facility input details to be used in the field. Provide general support to project and Show Designers. Provide general support to project mockup efforts on an as needed basis Required Qualifications & Skills A working knowledge of the entertainment or theatrical industries Knowledge of Show/Theatrical Lighting, Audio, Video, Set and Prop Construction and/or Rigging Ability to work in a fast-paced environment under strict deadlines Ability to handle multiple tasks and confidential information Strong work ethic and desire to learn and develop as an industry contributor Knowledge of theatrical, concert, or special effect industry standards Computer literacy with MS Office products Ability to work as a member of a technical team Competency in AutoCAD Must possess a valid driver's license Preferred Qualifications Experience with Technical Theatre, Technical Entertainment AutoCAD and/or SolidWorks experience Understanding of engineering practices Understanding of how Codes and Standards apply to Show/Theatrical Design Education Currently enrolled and attending an accredited college/university, earning a degree majoring in Technical Theater or related field Eligibility Requirements & Program Information Candidates for this opportunity MUST meet all of the below requirements: Be enrolled in an accredited college/university pursuing a degree taking at least one class at time of application posting OR currently participating in a Disney College Program or Disney Internship Be at least 18 years of age Possess unrestricted work authorization Have not completed one year of continual employment on a Disney internship or Disney College Program Additional Information Able to provide reliable transportation to/from work Must be fully available for the duration of the internship We provide limited housing opportunities for Florida Based Professional Interns through American Campus Communities, for more information click here The pay rate for this role in Orlando, FL is $26.50 per hour for undergraduate students and $27.50 for graduate level students. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits. To learn more about our benefits visit: ***************************** Job Posting Segment: WDI Creative Development Job Posting Primary Business: Show Mgmt & Operations (WDI) Primary Job Posting Category: Creative Intern, Engineering Intern Employment Type: Full time Primary City, State, Region, Postal Code: Lake Buena Vista, FL, USA Alternate City, State, Region, Postal Code: Date Posted: 2026-01-20

B Shift: Monday-Friday, 1pm-9pm What Assembly contributes to Cardinal Health Manufacturing is responsible for cost of production and maintenance activities including process improvement, supply chain management, quality assurance, employee safety and engagement, and environmental commitment. Performs a variety of tasks ranging from repetitive to non-repetitive production to put together component parts to make assemblies, sub-assemblies or completed units, using standard operating procedures. May conduct quality inspections on processing line in accordance with quality specifications. Job Summary The Associate II, Assembly plays a key role in the manufacturing process of Cardinal Health medical products. The Associate II, Assembly operates multiple machines at once and performs routine inspections of manufactured products in accordance with quality specifications. This job reports defects and works with the quality team to investigate and identify route causes. This job ensures that manufactured parts are captured in bins and prepared for transport. The Associate II, Assembly tasks are performed in accordance with applicable safety guidelines, as well as appropriate processing standards. Responsibilities Sets up and operates production equipment in accordance with current manufacturing practices and standard operating procedures. Measures and records data associated with operating and manufacturing equipment. Verifies outputs in the manufacturing process and ensures that quality and quantity standards are met. Inspects components for debris, and or any other potential quality defect and reports defects as needed to management and the quality team. Performs duties in compliance with all safety rules and regulations required by the Company, Local, and State and Federal provisions. Qualifications 1-2 years of experience preferred High school degree or GED preferred What is expected of you and others at this level Applies acquired knowledge and skills to complete standard tasks Readily learns and applies new information and methods to work in assigned area Maintains appropriate licenses, training and certifications Works on routine assignments that require some problem resolution Works within clearly defined standard operating procedures and/or scientific methods Adheres to all quality guidelines Works under moderate degree of supervision Work typically involves regular review of output by work lead or supervisor Refers complex unusual problems to supervisor Pay rate: $16.45 per hour (includes shift differential) Bonus eligible: No Benefits: Cardinal Health offers a wide variety of benefits and programs to support health and well-being. Medical, dental and vision coverage Paid time off plan Health savings account (HSA) 401k savings plan Access to wages before pay day with my FlexPay Flexible spending accounts (FSAs) Short- and long-term disability coverage Work-Life resources Paid parental leave Healthy lifestyle programs Application window anticipated to close: 02/06/2026 *if interested in opportunity, please submit application as soon as possible. Candidates who are back-to-work, people with disabilities, without a college degree, and Veterans are encouraged to apply. Cardinal Health supports an inclusive workplace that values diversity of thought, experience and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. Cardinal Health is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law. To read and review this privacy notice click here

GENERAL PURPOSE This position is responsible for properly recognize the correct linen belonging to the account being processed. You must ensure there is no mixed, dirty, or damaged linen before feeding into the machine or hand-folding it. You must maintain a fast pace speed meeting company's expectations while practicing safety procedures. In addition, the Production Operators will help on making sure the machinery is working properly, by communicating with their leaders of any issues. DUTIES AND RESPONSIBILITIES Feeding machinery with sheets, Duvets, bathrobes pillowcases, towels, tablecloths napkins, mats Responsible for maintaining a clean and organized working station. Ensure the linen being process belongs to the account assigned. Identify any damaged, dirty, or mixed linen and properly place it in the correct containers. Maintain an average of 85% or above for production based on the IT system in place. (Spindle) Must be logged into the IT system in place. (Spindle) always while working on the machine. Will be required to perform other duties as requested, directed, or assigned. Qualifications QUALIFICATIONS High school diploma or equivalent preferred but not required. 3 months or more related experience in a commercial laundry or hotel industry. Ability to understand, comprehend, and follow simple instructions, short correspondence, and product labeling. Ability to add and subtract two-digit numbers. Able to work in a fast-paced environment. Ability to meet required performance goals and objectives. Ability to work in a team environment and alone. Good communications, both orally and written in English. Must have good attention to detail. APPLICABLE WORKING CONDITIONS WORKING CONDITIONS AMOUNT OF TIME TYPICALLY SPENT ON ACTIVITY Inside work: protected from weather conditions FREQUENTLY OCCASIONALLY RARELY NEVER Outside work: no effective protection from weather FREQUENTLY OCCASIONALLY RARELY NEVER Both inside and outside work: activities occur both inside and outside an office enclosure FREQUENTLY OCCASIONALLY RARELY NEVER Extreme cold: below 32 degrees for periods of more than 1 hour throughout the normal course of a day FREQUENTLY OCCASIONALLY RARELY NEVER Extreme heat: above 100 degrees for periods of more than 1 hour throughout the normal course of a day FREQUENTLY OCCASIONALLY RARELY NEVER Noise: employees must shout to be heard over ambient noise level (hearing protection required) FREQUENTLY OCCASIONALLY RARELY NEVER Vibration: exposure to oscillating movements of extremities or whole body FREQUENTLY OCCASIONALLY RARELY NEVER Potential hazards: moving parts, electricity, gas, scaffolding, chemicals, etc. FREQUENTLY OCCASIONALLY RARELY NEVER Terminal viewing: extended viewing of screens FREQUENTLY OCCASIONALLY RARELY NEVER Atmospheric conditions (in non-confined spaces): fumes, odors, mists, gases, poor ventilation, etc. FREQUENTLY OCCASIONALLY RARELY NEVER Oils: air and/or skin exposure to oils and other cutting fluids FREQUENTLY OCCASIONALLY RARELY NEVER Respirator: use of a respirator is required FREQUENTLY OCCASIONALLY RARELY NEVER Physical stamina: due to emergency or workload demands, subject to extended work hours requiring stamina beyond normal demands or levels FREQUENTLY OCCASIONALLY RARELY NEVER None: employee is NOT substantially exposed to adverse environmental conditions (work occurs in typical indoors, office or administrative environment) FREQUENTLY OCCASIONALLY RARELY NEVER ESSENTIAL ABILITIES AND FUNCTIONS ACTIVITY FUNCTION AMOUNT OF TIME TYPICALLY SPENT ON ACTIVITY Essential Non-Essential Rarely Occasionally Frequently Standing (on a hard surface) X X Stairs X Walking X X Sitting X X Twisting X X Stooping X X Crouching X X Crawling X X Talking X X Hearing X X Reaching X X Seeing X X Balancing X X Pushing up to 20 lbs. X X Pushing up to 50 lbs. X X Pulling up to 20 lbs. X X Pulling up to 50 lbs. X X Grasping X X Lifting or carrying up to 10 lbs. X X Lifting or carrying up to 20 lbs. X X Lifting or carrying up to 50 lbs. X X Feeling X X Moving (continuous motion) X X Using precise hand movements X X Reasoning or solving problems X X Reading X X Writing X X Performing mathematical calculations X X Adhering to deadlines under pressure X X Learning or retaining technical information X X Interacting with customers or visitors X X

Job DescriptionJoin Our Team as a Machine Operator! Are you interested in joining one of Tampa Bay's Top Workplaces (for 12 years running!) that provides on-the-job training and a fun, high-energy atmosphere? If you said yes, then look no further!!!! About Our Company Founded in 1998, PostcardMania is all about making small business marketing better, smarter, and a whole lot more fun! We're proud to be one of Tampa Bay's Top 100 Workplaces, and as an Inc. 500 marketing powerhouse, we've built a team of over 350 amazing people and continue to expand our impact. When entrepreneurs want to see real results, they turn to us! Your Mission You will play a key role in our production process by operating either mailing equipment or bindery machinery, depending on daily needs. In the mailing role, you'll run the mailing machine to ensure postcards and other mailings are processed accurately, kept in proper zip code order, and delivered to the Post Office on time, while also handling mailing paperwork and order materials. In the bindery role, you'll operate folder, inserter, or other bindery equipment, organize and maintain postcard inventory in shelving units, and support overall production flow. In both areas, you'll collaborate with teammates and assist other operators as needed to keep things running smoothly. Schedule Monday through Friday. Hours vary depending on which machine you would be working. 7a-4p OR 9a-6p Compensation Starting at $16/hour Requirements Ability to lift up to 50 lbs repeatedly and remain on your feet for most of the workday Strong attention to detail with a high level of quality control Comfortable working in a fast-paced environment and meeting deadlines Basic computer skills, including Word, Excel, and Outlook Willingness to learn and safely operate equipment such as forklifts and pallet jacks (training provided) Positive, team-oriented attitude with strong communication skills High level of responsibility, reliability, and work ethic Desire to grow with the company and be part of a collaborative team Benefits Medical, Dental, Vision & Life Insurance 401K, Short- and Long-Term Disability, Accident & Critical Illness Paid vacation time that increases with longevity 6 paid holidays (New Year's Day, Memorial Day, Fourth of July, Labor Day, Thanksgiving, and Christmas) Free yoga on-site twice a week Free monthly visits to a local chiropractor and so much more!

Full-time Description At Spartronics we build products lives depend on! Our mission is to be the preferred provider of fail-safe electronics solutions that save lives and protect what matters most. A re you looking for a great opportunity working in the Aerospace & Defense Industry right here in Brooksville Florida? Spartronics is looking for career minded individuals who are interested in the manufacturing & assembly of critical components for Aerospace, Defense, Medical and Commercial applications. Whether you have experience in the industry or are looking for a change, Spartronics offers job training, great wages, health & dental insurance , paid vacation, paid holidays, retirement savings with company match. We operate in a fully air-conditioned facility, daytime shifts Monday-Thursday ("4/10" schedule) with overtime on Fridays and/or Saturdays. We are currently seeking Production Operators - Bond/Mask who are interested in building components essential to aerospace, defense, medical and commercial applications. Employees perform routine and/or repetitive operations in a flexible manufacturing environment in accordance with standardized processes, procedures or methods. This position may require frequent movement throughout the manufacturing operation. As a Production Operator - Bond/Mask you will assemble, disassemble, bond, mask, and repair electronic assemblies in a flexible manufacturing environment in accordance with standardized processes, procedures or methods. This position may require frequent movement throughout the manufacturing operation. What a Day Looks Like: Bond and masking electronic circuit boards to class 2 and class 3 requirements in accordance with J-STD. Solder/bond and coat and install components, wires, and adhesives on PC Boards. Read and work from assembly processes, procedures, engineering drawings, and specifications. Assemble circuit boards in accordance with standardized processes, procedures, and methods. Work with mechanical and/or electrical assemblies involving fixed indicating meters, in-circuit test/functional test, marking machines, jigs & fixtures, packaging, wire cutting, stripping & twisting equipment, various types of fastening devices involving power operations, hand tools and gauges (fixed, micrometers, calipers, rules). Assemble and/or repair printed wiring assemblies (pwa), subassemblies, instruments, and final assemblies of various components utilizing a wide range of tools, work processes and skills to approved documented procedures/specifications. Perform ICT and Functional testing on various products. Crimp pins, using both hand and semi-automatic crimping tools. Use heat guns to install heat shrink and/or solder splices. Strip wire using thermal, hand and semi-automatic strippers. Perform light mechanical assembly duties. Perform inspection of your work and the work of your co-workers. Record time and quantities on daily production logs and time sheets. Read and work from assembly processes, procedures, engineering drawings and specifications. Identify and document problems on assemblies and suggest solutions. This position typically works under general supervision and direction. Performs other assembly duties as required. Requirements To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions We are an ITAR Controlled Facility; all applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. High school graduate or equivalent. Minimum 6 months manufacturing experience preferred Ability to read and comprehend written work instructions. Ability to add and subtract fractions and decimals using direct reading, gauges, rulers and scales. Must be quality conscious and possess ability to meet production and quality standards. Ability to solve practical problems and/or interpret instructions furnished in written, oral, diagram or schedule form. Must maintain ESD Precautions Standards certification in areas/facilities where required. Must be able to pass J-STD certification course and maintain solder certification to operate certain pieces of equipment. May be required to have previous experience with hand tool operation. May require entry to mid-level computer skills. May be required to lift to 25 lbs. as required by the job task. Working Hours are Monday-Thursday (6am-4:30pm Monday -Thursday), day shifts of 10 hours per day. Job Location: Spartronics 30167 Power Line Road Brooksville, FL 34602 Our Commitment: At Spartronics, we're dedicated to fostering an inclusive, diverse, and equitable workplace. We believe that diverse perspectives drive innovation, and we welcome candidates of all backgrounds to apply. Our culture at Spartronics values accountability, unity, respect, and transparency. These winning values are the lifeblood of our business. We embrace diversity through people who believe in these values. Embracing our employees' differences enables us to be a stronger team. Join Our Journey: If you're ready to be a part of something extraordinary, challenge the status quo, and shape the future, then we want to hear from you. Together, we'll continue to win, while we build products lives depend on. Our Benefits: Full range of medical, dental, and vision benefits. Flexible Savings Accounts for Medical, Dependent Care, and Limited Purpose (dental and vision only) PTO and Holiday Pay Company-paid life insurance and disability at 1 time your annual salary at no cost to you, with options to increase coverage amounts 401k with a company match of 50% to every dollar up to 6% Accident, Critical Illness, Hospital Indemnity, and Legal Insurance optional plans Employee Assistance Program Tuition Reimbursement Opportunities to grow and excel in the Electronics Manufacturing industry at a company that values promotions and learning from within. Every day is different, challenging, and rewarding. How to Apply: If this sounds like the perfect opportunity for you, please apply with your resume outlining your qualifications and why you're excited about joining Spartronics. Spartronics is an equal opportunity Employer/Veteran/Disabled 41 CFR 60-1.4. We comply with federal Affirmative Action guidelines in all employment opportunities for qualified employees and applicants. We encourage applications from candidates of all backgrounds and experiences. This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. Spartronics LLC is an Equal Opportunity Employer/Veteran/Disabled 41 CFR 60-1.4

MaxPak, a TRG company and affiliate of Schwarz Partners, has an exciting opportunity available for General Labor (Manufacturing) for in Lakeland, FL! The General Labor position(s) are responsible for all activities associated with the operation, set-up, cleaning, preventative maintenance, and recommending improvements to the processes, procedures, and/or operation. If you choose to take this path with MaxPak, you will have the opportunity to learn and advance your skillset by training in various areas allowing you the opportunity to learn and grow with a growing company. MaxPak strives to promote within and if this sounds like the career path you are looking for and want to work for an established company with a great benefit package, look no more. MaxPak truly values our employees as our greatest asset and we strive to support both you and your family at work and in life. Our mission is to provide value-added solutions to the most demanding customers. ESSENTIAL JOB FUNCTIONS FOR THIS POSITION: Follow & Adhere to all Safety Rules & Policies Understand machine set-up techniques for the Die Cutter - (i.e.: print plates and die boards) Inspect all dies before and after each run to ensure that any and ALL repairs are made BEFORE the next run Monitor and adhere to specifications for each customer order and ensure print quality is in accordance with all required specifications Maximize the utilization of the equipment by operating the machinery at peak capacity and speed Crosstrain on other machines when possible and necessary Completion of required reports in an accurate and timely manner including: Production Data, Machine Operational Status, Safety Data, Quality Data, and any other reporting requested by your Supervisor Completing Maintenance Work Orders for necessary repairs. Preventative Maintenance Installation of Die Boards and Print Plates Training for new hires to the machine center Ensuring the crew is working safely and report any safety issues to your Supervisor REQUIRED EDUCATION & EXPEREINCE: High school diploma or GED Experience working in a manufacturing environment PREFERRED EXPEREINCE: Experience in the corrugated box industry REQUIRED SKILLS & ABILITIES: Ability to read a tape measure with speed and accuracy Ability to calculate figures and amounts such as percentages, measurement, volume, and rate. Ability to apply concepts of High School Math Excellent communication skills. Ability to solve practical problems and not so practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. AS AN INDUSTRY LEADER, MAXPAK OFFERS: Year-round employment for job stability. Unlimited opportunities for growth, training, and career advancement. Exceptional pay and great, affordable benefits (including life, medical, dental, vision, 401(k) with company match and more!). Paid holidays, overtime pay, and vacation time. A clean facility, featuring state-of-the-art technology. A respectful, empowering, team-oriented and employee-friendly environment. If you would like to be part of a forward-thinking team with a family feel, culture of excellence, and customer-focused reliability, we want you to be a part of our team!

Schedule Requirements: Monday- Thursday 7:00 AM - 5:30 PM Worksite: (Wimauma, FL) Everyone is welcome here. Each of us is unique, and that's what makes us amazing. We believe in inclusiveness and celebrating each person's individuality, because there's power in bringing people with different points of view and life experiences together. That's why we provide equal employment opportunities (EEO). All applicants are considered regardless of race, color, religion, national origin, age, sex, marital status, ancestry, physical or mental disability, veteran status, or sexual orientation. So, bring yourself and your best ideas; when we feel safe and comfortable being ourselves, there's no limit to what we can achieve. IN A NUTSHELL… As a Production Technician, you will play a critical role in the processing and production of high-quality cannabis products. This position involves working in all aspects of the production process, including extraction, packaging, and ensuring product quality. You will work closely with the Production Manager and team to maintain an efficient and productive work environment. The cultivation industry is continuously evolving, and you must be able and willing to learn and implement new technologies and methods to enhance efficiency and effectiveness. Parallel is one of the largest multi-state cannabis companies in the world, owning and operating in three markets; Florida (Surterra Wellness), Massachusetts (NETA) and Texas (Surterra Wellness). If you enjoy companies that are growing, moving fast, and constantly challenging themselves to achieve more, then Parallel is for you. We work hard, lean on each other, and are passionate about a pretty ambitious vision … pioneering a new paradigm of what well-being can be for all people, everywhere. For more information, visit ********************* WHAT YOU WILL BE DOING Extraction: Support extraction processes, including operating extraction equipment, and ensuring the safe and efficient production of cannabis concentrates. Lab Work: Assist with lab-related tasks, including the preparation and testing of samples, maintaining lab equipment, and ensuring compliance with safety and quality standards. Packaging: Assist with the packaging of cannabis products, including labeling, weighing, and sealing products for distribution. Quality Control: Conduct quality control checks throughout the production process to ensure products meet company standards and regulatory requirements. Sanitation: Maintain a clean and organized work environment, including the cleaning and sanitization of equipment and work areas to prevent contamination. Compliance: Adhere to all state and local regulations, as well as company policies and procedures, to ensure legal and operational standards are met. Inventory Management: Assist with inventory management, including tracking and recording product quantities, and reporting discrepancies. Lab Work: Assist with lab-related tasks, including the preparation and testing of samples, maintaining lab equipment, and ensuring compliance with safety and quality standards. Adaptability and Learning: Stay updated on industry trends and new technologies. Be open to learning and implementing new methods to improve production efficiency and effectiveness. Team Collaboration: Work collaboratively with other team members to ensure the smooth and efficient operation of the production department. Other Duties: Perform other duties as assigned by the Production Manager to support the overall success of the production operation. EXPERIENCE AND SKILLS YOU'LL BRING Required Age 21 or over High School Diploma or equivalent Valid Government-Issued Photo ID Preferred Previous experience working in a cannabis production facility, lab, or a related manufacturing environment. Familiarity with quality control, policy, procedure, and documentation Experience with cannabis extraction processes, lab procedures, knowledge of production techniques, and proficiency in using production-related software and tools. Ability to learn new technologies Ability to multitask and be aware of multiple active processes PHYSICAL REQUIREMENTS Ability to consistently lift up to 25 pounds Ability to be able to be in constant standing/moving position Ability to perform various physical activities, including lifting, standing, and squatting YOU WILL BE SUCCESSFUL IF YOU… Are self-motivated; micro-managing isn't fun for anyone Roll your sleeves up and do the work; strategy is important, but so is getting stuff done Willingness to flex between department to s Can work fast and be flexible; our industry is always changing Play nice with others; we collaborate with each other a lot Think creatively; sometimes, the "traditional" solution isn't the best one WHAT YOU GET Employee discount Consistent, reliable benefits; Full medical/vision/dental, 401k with possibility of a company match, access to company-sponsored well-being programs Balance and flexibility; paid time off, paid parental leave, flexible work arrangements Tuition Reimbursement Programs Pet Insurance Chance to make a difference; Employee Relief Fund, community volunteerism through our Parallel Cares program PARALLEL IS UNITED BY OUR VISION, Mission, & Values Our Vision - why we exist - is to pioneer well-being and improve the quality of life for humanity through the benefits of cannabinoids. Our Mission - how we will do this - is to build a leading, global well-being company through the best talent, our values, trusted and recognized brands, science and technology-based innovation, and a relentless focus on execution and continuous improvement. Our Values - Integrity | Collaboration | Alignment | Intentionality | Accountability | Agility We are an Equal Opportunity Employer. We embrace and encourage our employees' differences in age, color, disability, ethnicity, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socioeconomic status, veteran status, and other characteristics that make our employees unique. Disclaimer Parallel reserves the right to change or assign other duties to this job description. Your employment with Parallel is a voluntary one and is subject to termination by you or Parallel at will, with or without cause, and with or without notice, at any time. Nothing in this document shall be interpreted to be in conflict with or to eliminate or modify in any way the employment-at-will status of Parallel associates.

We Create Products and Brands That People Trust to Clean, Sanitize, and Protect Their Homes and Pools When you join KIK Consumer Products, you're joining a team that cares about the work we do and also about each other. We bring exceptional brands and products to consumers that help them protect the health and wellness of their families and the cleanliness of their homes and pools. We are committed to building a culture of performance driven by accountability, collaboration, and agility that enables timely fact-based decision-making and exceptional execution with unwavering ethics. As one of North America's largest independent manufacturers of consumer products, KIK helps a large portfolio of brands and retailers bring their products to life. Your Role at KIK In this role, you'll have the unique responsibility of ensuring product quality and safety, with the freedom to start and stop production as needed to insure quality and safety. You'll also gain hands-on experience with various equipment and duties, enhancing your skillset in a safe and empowering work environment. With a competitive pay rate of $20.00 per hour, this position offers the chance to develop your career while working 2nd shift: Monday - Friday 1:00pm-9:30pm. This role is eligible for the $1.00 shift differential for working 2nd and 3rd shift. What You'll Be Doing * Monitor bottle indexing on conveyor systems through the filling process * Monitor and document all Quality-related items (Hourly updates on production boards, Component verification to ensure correct product is produced, Bottle and label visual inspection for accurate packaging of product, verifying date code labeling correctness, Product verification, Weight checks on filled bottles) * Strong communication skills regarding machine problems and quality requirements * Ability to start and stop equipment and identify basic mechanical issues & adjust machine setups (Fillers, cappers, labelers, case packers, case erectors, palletizers) * Follow all safety requirements including using appropriate Personal Protective Equipment - PPE (safety glasses, required footwear, hearing protection, hand protection, correct lifting methods, etc.) * Support all changeover requirements of commodity products (changing caps, line clearance, assisting mechanics with changeovers) * Make tank switches and understand & execute the valve change process What You'll Bring * Minimum of high school degree or equivalent * No prior manufacturing experience required, but preferred * Demonstrated ability and willingness to learn machine operation in a fast-paced production environment * Able to work scheduled overtime or shift changes when required * Basic math skill set * Able to lift 40 pounds periodically throughout the manufacturing shift and meet physical requirements of position including lifting, bending, standing for extended periods, reaching with both hands/arms, ability to visually inspect product * Mechanically inclined to perform minor machine corrections within job responsibilities What You Will Get KIK offers a competitive salary and comprehensive benefits including health, wellness, dental, vision, life, and disability insurance. You can plan for your future with KIK's retirement savings options including employer match. KIK also recognizes the importance of continuing education and offers Education Assistance to our employees to encourage continued personal development and growth. About KIK We create products and brands that people trust to clean, sanitize, and protect their homes, pools, and cars. We are one of North America's largest independent consumer product manufacturers with 16 North American manufacturing facilities. We also operate globally in Canada, Europe, and Australia. We are known for our portfolio of notable brands including Spic and Span and Comet cleaning products, Clorox Pool&Spa (under license), BioGuard, and Natural Chemistry pool chemicals. We are also the #1 producer in North America of store-brand ("private label") bleach and a leading private-label provider of laundry detergent and additives, dishwashing products, general-purpose cleaning, and other home care products. Our global team of over 2,300 employees drives our capabilities in product development, product formulation, strategic sourcing, manufacturing, packaging design, brand marketing, project management, quality assurance, compliance, distribution, and logistics. Our organization is constantly evolving and is driven by a set of "One KIK" values - a dedication to following through on commitments in a customer-focused, profit-motivated way; while never compromising on safety, ethics, or integrity. KIK is an Equal Employment Opportunity / Affirmative Action employer. KIK does not discriminate against qualified applicants or employees based on race, color, age, religion, sex, pregnancy, national origin, ancestry, age, physical or mental disability, veteran status, status in uniformed services, sexual orientation, gender identity, gender expression, marital status, genetic information or any other status protected by law. KIK is also committed to providing reasonable accommodation for applicants and employees with protected disabilities to the extent required by applicable laws. If you require reasonable accommodation to participate in the job application, or interview process, or to perform the essential functions of the job, please contact Human Resources immediately. Privacy Policy: ************************************************

Details Job Title: Production Tech Department: Operations Reports to: Production Supervisor FLSA Status: Full-Time, Non-Exempt Our mission is to share a sense of adventure with the world through our high performance marine products while instilling and inspiring consumer confidence with superior service. Benefits 100% employer paid - Employee/family health plan option available Health Savings Account (HSA) - with generous employer matching program Dental, Vision, Voluntary Life Insurance 100% employer paid - Employee Life Insurance, Short Term and Long-Term Disability Insurance Accident, Hospital and Critical Illness 401K with generous employer matching program Paid time off Holiday pay Annual employee apparel spending allowance Employee Referral Program Summary The Production Tech tends one or more machine tools, special purpose machines, or works to specifications on production basis for assembling an entire product or components of a product to produce the highest quality product for the end user. Company Values: Exceptional Client Service - Our customers are our life blood, we treat them as the essential partners that they are by going the extra mile and putting customer needs first Innovation and Growth - Always looking to acquire new information and try new things to improve how we work Ethical Orientation - Earns the trust and confidence of coworkers and customers through honest communication, ethical behavior and professionalism in all interactions Driven & Passionate - Shows passion for improving the delivery of services with a commitment to continuous improvement Duties and Responsibilities Lifts work piece manually onto pallets or workstation for assembly. Perform quality checks on products and parts Inspects and measures machined work pieces to verify conformance to specifications. Count and assemble kits for other components. Wrap and box components. Cleans machined parts. i.e. drill table, drill press. Tends machines and equipment other than machine tools. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice Requirements: Machine and Tools Used Ability to use and understand air tools Ability to use sockets and wrenches Box Taping Machine Language Skills: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Problem Solving Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Working Hours: Hours will be 7:00 AM to 4:00 PM Monday through Friday Working Conditions/Physical Demands of the Job: Warehouse/Production: The work environment characteristics described here are representative of those typical in a warehouse environment. The noise level in the work environment is usually moderate to loud, including the sounds of forklifts and tools. The temperature in the warehouse is moderate to hot depending on the time of the year. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands and fingers to handle or feel; and reach with hands and arms. The employee must frequently lift and/or move up to 50 pounds. *Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

As an Electronics Machine Operator manufacturing circuit card assembly, you will maintain and operate complex electronics machinery, by following established procedures, work instructions, and schematics. Your role includes performing both repetitive and non-repetitive production tasks, adjusting machine settings, and conducting preventive maintenance. **Job Description** Electronics Machine Operator - 2nd Shift Job Summary As an Electronics Machine Operator at GE Aviation, you will be responsible for operating and monitoring various automated machinery to assemble and test electronic components for critical aviation systems on our 2nd shift. This role requires attention to detail, adherence to safety protocols, and a commitment to quality in a fast-paced manufacturing environment. Responsibilities * Operate, set up, and troubleshoot automated and semi-automated machinery used in the assembly and testing of electronic components. * Monitor machine operations to detect malfunctions and make adjustments as needed to maintain product quality and production efficiency. * Perform routine preventative maintenance on equipment to ensure optimal performance and minimize downtime. * Load and unload materials and components into machines, ensuring correct placement and orientation. * Conduct in-process inspections and quality checks using precision measuring instruments to verify product specifications. * Record production data, including quantities produced, defects, and machine performance, in accordance with established procedures. * Identify and report equipment malfunctions, quality issues, or safety concerns to supervisory personnel. * Maintain a clean and organized work area, adhering to 5S principles. * Follow all safety regulations and company policies, including wearing appropriate personal protective equipment (PPE). * Collaborate with team members and supervisors to meet production targets and continuous improvement initiatives. Qualifications * High School Diploma or GED equivalent. * 1+ year of experience operating manufacturing machinery, preferably in an electronics or precision manufacturing environment. * Ability to read and interpret technical drawings, schematics, and work instructions. * Basic computer proficiency for data entry and system navigation. * Strong attention to detail and ability to perform repetitive tasks with accuracy. * Good manual dexterity and hand-eye coordination. * Ability to stand for extended periods and lift up to 25 pounds regularly. * Familiarity with lean manufacturing principles (e.g., 5S, waste reduction) is a plus. * Must be able to work the 2nd shift (e.g., typically afternoon/evening hours). * Strong commitment to safety and quality. **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

GENERAL PURPOSE This position is responsible for properly recognize the correct linen belonging to the account being processed. You must ensure there is no mixed, dirty, or damaged linen before feeding into the machine or hand-folding it. You must maintain a fast pace speed meeting company's expectations while practicing safety procedures. In addition, the Production Operators will help on making sure the machinery is working properly, by communicating with their leaders of any issues. DUTIES AND RESPONSIBILITIES Feeding machinery with sheets, Duvets, bathrobes pillowcases, towels, tablecloths napkins, mats Responsible for maintaining a clean and organized working station. Ensure the linen being process belongs to the account assigned. Identify any damaged, dirty, or mixed linen and properly place it in the correct containers. Maintain an average of 85% or above for production based on the IT system in place. (Spindle) Must be logged into the IT system in place. (Spindle) always while working on the machine. Will be required to perform other duties as requested, directed, or assigned. Qualifications QUALIFICATIONS High school diploma or equivalent preferred but not required. 3 months or more related experience in a commercial laundry or hotel industry. Ability to understand, comprehend, and follow simple instructions, short correspondence, and product labeling. Ability to add and subtract two-digit numbers. Able to work in a fast-paced environment. Ability to meet required performance goals and objectives. Ability to work in a team environment and alone. Good communications, both orally and written in English. Must have good attention to detail. APPLICABLE WORKING CONDITIONS WORKING CONDITIONS AMOUNT OF TIME TYPICALLY SPENT ON ACTIVITY Inside work: protected from weather conditions FREQUENTLY OCCASIONALLY RARELY NEVER Outside work: no effective protection from weather FREQUENTLY OCCASIONALLY RARELY NEVER Both inside and outside work: activities occur both inside and outside an office enclosure FREQUENTLY OCCASIONALLY RARELY NEVER Extreme cold: below 32 degrees for periods of more than 1 hour throughout the normal course of a day FREQUENTLY OCCASIONALLY RARELY NEVER Extreme heat: above 100 degrees for periods of more than 1 hour throughout the normal course of a day FREQUENTLY OCCASIONALLY RARELY NEVER Noise: employees must shout to be heard over ambient noise level (hearing protection required) FREQUENTLY OCCASIONALLY RARELY NEVER Vibration: exposure to oscillating movements of extremities or whole body FREQUENTLY OCCASIONALLY RARELY NEVER Potential hazards: moving parts, electricity, gas, scaffolding, chemicals, etc. FREQUENTLY OCCASIONALLY RARELY NEVER Terminal viewing: extended viewing of screens FREQUENTLY OCCASIONALLY RARELY NEVER Atmospheric conditions (in non-confined spaces): fumes, odors, mists, gases, poor ventilation, etc. FREQUENTLY OCCASIONALLY RARELY NEVER Oils: air and/or skin exposure to oils and other cutting fluids FREQUENTLY OCCASIONALLY RARELY NEVER Respirator: use of a respirator is required FREQUENTLY OCCASIONALLY RARELY NEVER Physical stamina: due to emergency or workload demands, subject to extended work hours requiring stamina beyond normal demands or levels FREQUENTLY OCCASIONALLY RARELY NEVER None: employee is NOT substantially exposed to adverse environmental conditions (work occurs in typical indoors, office or administrative environment) FREQUENTLY OCCASIONALLY RARELY NEVER ESSENTIAL ABILITIES AND FUNCTIONS ACTIVITY FUNCTION AMOUNT OF TIME TYPICALLY SPENT ON ACTIVITY Essential Non-Essential Rarely Occasionally Frequently Standing (on a hard surface) X X Stairs X Walking X X Sitting X X Twisting X X Stooping X X Crouching X X Crawling X X Talking X X Hearing X X Reaching X X Seeing X X Balancing X X Pushing up to 20 lbs. X X Pushing up to 50 lbs. X X Pulling up to 20 lbs. X X Pulling up to 50 lbs. X X Grasping X X Lifting or carrying up to 10 lbs. X X Lifting or carrying up to 20 lbs. X X Lifting or carrying up to 50 lbs. X X Feeling X X Moving (continuous motion) X X Using precise hand movements X X Reasoning or solving problems X X Reading X X Writing X X Performing mathematical calculations X X Adhering to deadlines under pressure X X Learning or retaining technical information X X Interacting with customers or visitors X X

Full-time Description At Spartronics we build products lives depend on! Our mission is to be the preferred provider of fail-safe electronics solutions that save lives and protect what matters most. A re you looking for a great opportunity working in the Aerospace & Defense Industry right here in Brooksville Florida? Spartronics is looking for career minded individuals who are interested in the manufacturing & assembly of critical components for Aerospace, Defense, Medical and Commercial applications. Whether you have experience in the industry or are looking for a change, Spartronics offers job training, great wages, health & dental insurance , paid vacation, paid holidays, retirement savings with company match. We operate in a fully air-conditioned facility, daytime shifts Monday-Thursday ("4/10" schedule) with overtime on Fridays and/or Saturdays. We are currently seeking Production Operators/Testers who are interested in building components essential to aerospace, defense, medical and commercial applications. Employees perform routine and/or repetitive assembly operations in a flexible manufacturing environment in accordance with standardized processes, procedures, or methods. This position may require frequent movement throughout the manufacturing operation. Why Join Us: When you become a part of Spartronics, you're joining a team of dedicated and talented, individuals who share a common goal - to win as one. We value talent, innovation, and a hunger for growth. Here, you'll have the opportunity to work with industry leaders in Aerospace & Defense, Medical & Life Science, and Industrial markets where our customers put full trust in us to deliver the most complex, highly regulated products that must work the first time, every time. What a Day Looks Like: Build and solder electronic circuit boards to class 2 and class 3 requirements in accordance with J-STD. Solder and install components, wires, and adhesives on PC Boards. Read and work from assembly processes, procedures, engineering drawings and specifications. Assemble circuit boards in accordance with standardized processes, procedures and methods. Work with mechanical and/or electrical assemblies involving fixed indicating meters, in-circuit test/functional test, marking machines, jigs & fixtures, packaging, wire cutting, stripping & twisting equipment, various types of fastening devices involving power operations, hand tools and gauges (fixed, micrometers, calipers, rules). Assemble and/or repair printed wiring assemblies (pwa), subassemblies, instruments, and final assemblies of various components utilizing a wide range of tools, work processes and skills to approved documented procedures/specifications. Perform ICT and Functional testing on various products. Crimp pins, using both hand and semi-automatic crimping tools. Use heat guns to install heat shrink and/or solder splices. Strip wire using thermal, hand and semi-automatic strippers. Perform light mechanical assembly duties. Perform inspection of your work and the work of your co-workers. Record time and quantities on daily production logs and time sheets. Read and work from assembly processes, procedures, engineering drawings and specifications. Identify and document problems on assemblies and suggest solutions. This position typically works under general supervision and direction. Performs other assembly duties as required. Requirements What You'll Need: We are an ITAR Controlled Facility; all applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. High school graduate or equivalent required Minimum 6 months manufacturing experience preferred Ability to read and comprehend written work instructions. Ability to add and subtract fractions and decimals using direct reading, gauges, rulers and scales. Must be quality conscious and possess ability to meet production and quality standards. Ability to solve practical problems and/or interpret instructions furnished in written, oral, diagram or schedule form. Must maintain ESD Precautions Standards certification in areas/facilities where required. Must be able to pass J-STD certification course and maintain solder certification to operate certain pieces of equipment. May be required to have previous experience with hand tool operation. May require entry to mid-level computer skills. May be required to lift to 25 lbs. as required by the job task Working Hours are Monday-Thursday (6am-4:30pm Monday -Thursday), day shifts of 10 hours per day. Job Location: Spartronics 30167 Power Line Road Brooksville, FL 34602 Our Commitment: At Spartronics, we're dedicated to fostering an inclusive, diverse, and equitable workplace. We believe that diverse perspectives drive innovation, and we welcome candidates of all backgrounds to apply. Our culture at Spartronics values accountability, unity, respect, and transparency. These winning values are the lifeblood of our business. We embrace diversity through people who believe in these values. Embracing our employees' differences enables us to be a stronger team. Join Our Journey: If you're ready to be a part of something extraordinary, challenge the status quo, and shape the future, then we want to hear from you. Together, we'll continue to win, while we build products lives depend on. Our Benefits: Full range of medical, dental, and vision benefits. Flexible Savings Accounts for Medical, Dependent Care, and Limited Purpose (dental and vision only) PTO and Holiday Pay Company-paid life insurance and disability at 1 time your annual salary at no cost to you, with options to increase coverage amounts 401k with a company match of 50% to every dollar up to 6% Accident, Critical Illness, Hospital Indemnity, and Legal Insurance optional plans Employee Assistance Program Tuition Reimbursement Opportunities to grow and excel in the Electronics Manufacturing industry at a company that values promotions and learning from within. Every day is different, challenging, and rewarding. How to Apply: If this sounds like the perfect opportunity for you, please apply with your resume outlining your qualifications and why you're excited about joining Spartronics. Spartronics is an equal opportunity Employer/Veteran/Disabled 41 CFR 60-1.4. We comply with federal Affirmative Action guidelines in all employment opportunities for qualified employees and applicants. We encourage applications from candidates of all backgrounds and experiences. This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. Spartronics LLC is an Equal Opportunity Employer/Veteran/Disabled 41 CFR 60-1.4

Requirements Machine and Tools Used Ability to use and understand air tools Ability to use sockets and wrenches Box Taping Machine Language Skills: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Problem Solving Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Working Hours: Hours will be 7:00 AM to 4:00 PM Monday through Friday Working Conditions/Physical Demands of the Job: Warehouse/Production: The work environment characteristics described here are representative of those typical in a warehouse environment. The noise level in the work environment is usually moderate to loud, including the sounds of forklifts and tools. The temperature in the warehouse is moderate to hot depending on the time of the year. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands and fingers to handle or feel; and reach with hands and arms. The employee must frequently lift and/or move up to 50 pounds. *Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.