Production associate jobs in Goshen, IN - 358 jobs

General production employees work as a team member of one of our production lines which include the following: Bimini's, Final Finish, Floors (Decking/Framing/Vinyl-Trim), Furniture (Install/Prep), Helm (Install/Prep), Metal Jacket, Rail (Build/Install), Shrink Wrap, Saw Operator, In Floor Storage Build and Underbelly. There are two levels of Production employees at Barletta (Production I and Production II) which may be differentiated based upon and individual's specialized skills, abilities, previous work experience, and ability to work across multiple (3 or more) production departments. Individuals in any of these roles must have a strong work ethic and the ability to work in a fast-paced and team-focused environment. Barletta's culture is what sets us apart and creates a great employee experience. In addition to a Barletta Safe culture where all employees work collaboratively to create a "zero harm" work environment, we actively promote and encourage behaviors that align to our Values: 1) Treat everyone like family, 2) Always do the right thing, and 3) Relentlessly pursue excellence and our Leadership Expectations: 1) Connect with Purpose, 2) Execute with Excellence and 3) Build the future. JOB REQUIREMENTS: Job requirements for our general production positions are as follows: * At least 2 years' experience working in a team-focused manufacturing environment (preferred) * Must have the ability to perform all physical requirements required of the position, including but not limited to: ability to stand, walk, push, pull, bend, kneel, climb, squat for 8+ hours and lift upward of 40 lbs. * Must possess good work ethic, positive attitude, and motivated to meet and / or exceed production goals. * Ability to work flexible hours (overtime / weekends) if needed. * Flexibility to take on additional assignments given by supervisor as required / needed to support production goals. * Great attendance record and reliability * Must be able to pass a pre-employment drug and background screening * Supports a Barletta Safe culture by adhering to and advocating for the safest behaviors and proactively identifies opportunities to mitigate job-related risks and hazards. Ability to wear required PPE to support our Barletta Safe culture of "zero harm". QUALIFICATIONS: * Must have the ability to perform all physical requirements required of the position, including but not limited to: ability to stand, walk, push, pull, bend, kneel, climb, squat for 8+ hours and lift upward of 40 lbs. * Ability to adapt to climate, inside and outside * Must display good verbal and written communication skills * Must be able to follow policies and procedures and wear required PPE * Must be able to multi-task while remaining calm under pressure * Must possess work ethic, positive attitude, and motivated to meet and / or exceed production goals. * Ability to work flexible hours (overtime / weekends) if needed. * Flexibility to take on additional assignments given by supervisor as required/ needed to support production goals. * Great attendance record and reliability COMPENSATION AND BENEFITS: * Compensation is based on past job history, knowledge, and experience. * Medical/Rx * HSA/FSA * Dental & Vision * Short and Long-Term Disability * Company Paid Life Insurance and AD&D * Voluntary Life, Accident, Critical Illness, Hospital, Legal, Identity Theft * 401k with match * Employee Stock Purchase Program * Tuition Reimbursement As part of our hiring process, all candidates who receive a conditional offer of employment will be required to successfully complete a pre-employment background check and drug screening. These screenings are conducted to ensure the safety and integrity of our workplace. * This job description is intended to outline those functions typically performed by individuals assigned to this classification. This description is not intended to be all-inclusive or to limit the discretionary authority of supervisors to assign other tasks of similar nature or level of responsibility. Barletta Boats reserves the right to change or assign to this position as required.

The responsibility of the Assembler is to take various molded products and trim and/or assemble them into finished goods within quality and efficiency standards. Duties and Responsibilities Pull and review work instructions prior to starting a job. Review production priorities. Ensure that all necessary information and tools required for each job are in place before work begins. Retrieves product for trimming or assembly and moves to designated areas when complete. Finishes molded product using various methods designated for the job. These methods include, but not limited to: Use of hand and power tools. Use of pallet jack. Use of hot iron. Use of open flame. Completes product labels and ensures product is identified throughout each operation. Responsible for final inspection of product and ensures that product is of excellent quality before shipping to the Customer. Use of Reporting system to record production. Knowledge, Skills and Abilities Effective communication skills Good organizational skills Ability to read and write proficiently in English Ability to use hand and power tools Ability to operate and maintain industrial equipment Education and Experience 1-2 years' experience in manufacturing preferred Working Conditions Able to work in a hot humid environment for extended periods of time. This job is in a typical manufacturing environment, to include, but not limited to: Ovens, torches, and rotating tools Forklifts and other moving machinery Loud work environment Physical Requirements Must be able to remain stationary with intermediate walking throughout the shift. Frequently lift parts weighing up to 50 pounds alone and parts more than 50 pounds with assistance and must be able to transport these up to 20 feet. Frequently positions self to maneuver around the parts, materials, and molds. Must be able to operate the hand and tools and write legible.

Job Description Grow with Welch's! Welch's is on a journey towards our bold ambition of being the global-leader of convenient, good for you fruit-based food and beverages. To turn this goal into a reality we need you and other exceptionally talented, agile, and innovative individuals who are eager to contribute to something extraordinary! At Welch's, we're not just offering a job; we're inviting you to be a part of a vibrant, authentic, and inclusive culture where you not only belong, but also have the opportunity to unleash the best, most authentic version of you. Position Summary: The General Production Labor role operates manufacturing equipment to produce high quality food and beverage products in a safe and effective manner. We are currently hiring for 2nd and 3rd shift! Pay rate starts at $19.96. Where You'll Work This role will be based out of our 24/7 manufacturing facility in Lawton, MI. What You'll Do: Operate equipment to meet department goals Move, organize, and stage ingredients Produce documentation to verify safety, quality, and production standards Observe operations to ensure schedules and quality standards are met Submit reports summarizing daily production Inspect and test production line set-ups to ensure proper equipment operation Check production equipment daily for proper cleaning and safe operation Clean and sanitize production facilities and equipment Follow the Plant Safety Program, GMP requirements and both people & food safety protocols Ensure enough supplies and ingredients for production schedules Perform other duties as assigned Who You Are: A team player who takes pride in their work High attention to detail Safety-minded with the goal to protect yourself and others Ability to understand and follow a process from start to finish Strong problem solver Required physical abilities Ability to frequently lift up to 50 pounds with or without assistance Ability and willingness to work 8+ hour shifts Ability to stand, stoop, bend, crouch for extended periods of time Ability to climb stairs, ladders, and work in an elevated environment Ability to work in varying temperatures (hot/cold) and both indoor/outdoors What You'll Need: High school diploma, GED, or equivalent is required Experience as a Production Worker, Manufacturing Associate, Material Handler, General Labor, or other Manufacturing or industrial role preferred What You'll Enjoy: Organization with a bold, clear purpose & vision for the future Inclusive Culture: Be a part of an inclusive workplace where you not only belong but also have the opportunity to be the best version of yourself Passionate Community: You are encouraged to have a voice, share your opinions, and have individual impact on the success of the business Development & Advancement: Access to LinkedIn Learning as well as both formal and informal opportunities to develop and grow your career Welch's is an Equal Employment Opportunity Employer. We are committed to the prevention of employment discrimination based on race, religion, color, sex, gender identity, national origin, age, marital status, disability and/or military or veteran status, sexual orientation or any other action covered by federal or applicable state/local laws. Welch's offers more than just a job - it's an opportunity to grow, innovate, and make a global impact with a passionate community.

About Us: At Liberty Tire Recycling, we're building a sustainable future - one tire at a time. As North America's leading tire recycler, we offer a unique opportunity to make a real impact on the environment. Join our team of nearly 4,000 dedicated employees across 70+ sites and help us transform billions of pounds of waste tires into valuable resources. We're committed to innovation, a circular economy, and providing a rewarding workplace where you can grow and thrive. Job Summary: Liberty Tire Recycling has an immediate opening for a General Laborer/Production Worker. This is a manual labor position. Working in the Plant assisting with machine operation, granulation, and cleanup. Forklift experience is a plus but not mandatory. Duties and Responsibilities: Must be able to lift and load tires of all sizes: personal vehicle, truck and tractor tires. Show up on time. Daily contact requires courtesy, discretion and sound judgment. Assisting with machine operation May assist in performing routine inspections and preventive maintenance on assigned equipment and refer defects or repairs to dispatch, clean equipment. Perform all duties in conformance to appropriate safety standards. Other duties will be assigned as necessary by the company, such as truck cleaning and customer service visits to stores, to ensure they have enough work in the slow season. Skills and Abilities: Lift up to and including 50 pounds(50+ with assistance) on a routine basis. Be physically capable of loading upwards of 1,220 tires per day. Must be physically capable of climbing in a trailer unassisted in a safe manner to reduce injury. Learn to lace tires in a safe manner to prevent injury and maintain a secure load during transport. Ability to establish and maintain effective working relationships with employees, supervisors and the public. Ability to work independently with general instructions. Ability to perform heavy manual tasks under varying weather conditions. Ability to make independent judgments which have a moderate impact on the company. Education and Experience: Prior experience in the tire recycling or manufacturing industry is a plus. Compensation: $17.50 an hour. Paid bi-weekly. Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance EEO Statement: Liberty Tire Recycling is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sex, national origin, age, disability, protected veteran status, relationship or association with a protected veteran (spouses or other family members), genetic information, or any other characteristic protected by applicable law.

Job Description By separating the useful from the harmful, Mann + Hummel is providing key technologies to help enable a cleaner planet. Because when it comes to cleaner mobility, air, and water, there is no mine or yours... there is only ours. As a global filtration company, they are dedicated to developing top solutions for vehicle and industrial applications using clean air and sustainable water management. As a Production Operator for Mann + Hummel, you will be responsible for assembling production components and ensuring customer requirements are met. A typical day as a Production Operator includes: Assembling product and operating machinery according to standard rates and customer requirements Performing and documenting quality checks Verifying proper cell set up by ensuring the correct parts are running and verifying barcodes/lot numbers Must be able to read, write and speak English. Counting and packaging inventory into containers for shipment worldwide Practicing and participating in all 5S activities Let's chat about the Production Operator role if you: Can spot a flaw from a mile away thanks to your keen eye for detail Are mechanically inclined and like working with your hands Can work well with others as well as independently Prefer detailed processes and a steady pace Would rather be on your feet all day than behind a desk Don't mind the workout that comes with occasionally lifting up to 50 lbs Have basic math skills including adding, subtracting, dividing, computing ratios, and interpreting bar graphs Have positive and professional written/verbal communication skills Have a high school diploma and previous manufacturing experience (not required, but preferred!) Understand the importance of a safe and clean work environment Enjoy the extra cash that comes with working overtime Have reliable transportation to get you to work on time every day We offer Production Operators: Full time work on all shifts (1st: 7 am - 3 pm, 2nd: 3 pm - 11 pm, 3rd: 11 pm - 7 am) A pay rate of $16.25-17.50/hour Entry-level, temp to hire opportunities A pay increase, benefits package, 401(k) match, and more upon hire-in A bright, clean, and positive working environment A $100 bonus when you refer a friend to WSI By submitting your application for this position, you are agreeing to receive communication from WSI, which may include calls, texts, and emails. You have the option to unsubscribe from email communications or remove yourself from SMS messaging by replying 'stop' at any time.

AZZ Inc. is a leading provider of specialized products and services designed to meet the unique needs of industrial markets worldwide. With a rich history spanning several decades, AZZ has established a strong reputation for innovation, quality, and customer satisfaction. At AZZ, our culture is defined by trust, respect, accountability, integrity, teamwork and safety ("TRAITS"). We are dedicated to our employees by fully training and equipping them and providing a safe environment to grow personally and professionally. We strive to build, maintain and create a work environment that attracts and retains employees who are high contributors, have outstanding skills, are engaged in our culture, and who embody our Company mission: to create superior value in a culture where people can grow both professionally and personally, and where TRAITS matter. As AZZ Inc. continues to evolve and innovate, it remains committed to driving shareholder value while maintaining its reputation as a leader in industrial solutions. With a strong foundation built on decades of experience and a forward-thinking approach, AZZ Inc. is poised to continue its upward trajectory, delivering sustainable growth and an unwavering commitment to excellence. Job Description AZZ has an exciting 1st shift opportunity for a production worker at our Hamilton facility. Reporting to the Operations Manager you will help handle and clean material through the galvanizing process, to help us meet customer commitments. Duties and Responsibilities Responsible for tying or assisting with tying material onto racks with wire or chain for safe movement through the galvanizing process. Use wire to tie material to bow racks, universal racks, or other tooling to prepare for the pickling tanks using specific training methods for the galvanizing process. Use rope to lift and prepare material for the pickling tanks using specific training methods for galvanizing process. Operates and visually inspects all equipment (i.e. forklifts, cranes, tooling, etc.) prior to usage to ensure no maintenance is needed. Learns to rack a variety of materials by assisting others. Racks, unracks or cleans material in order as directed. May learn to use a torch to dry materials before hot dipping. May clean material using a grinder, file, or brush as specified by the customer. Inspects material for sags, runs, drips, bare spots and reports it to management. Uses bolt cutters to remove wire from product and tooling and disposes of it per established procedures. Learns to inspect materials for holes, smothered spots, etc. Perform housekeeping activities to keep production area and equipment clean and organized. Confers with supervisors to report material conditions that could result in production or customer problems by form of damage or quality issues. May assist with training new production helpers as specified by management. Required to wear protective equipment, follow safety rules and all company policies and procedures Qualifications 1+ years of manufacturing experience preferred Must be able to lift 50 lbs Must be able to work in a non-climate controlled facility Excellent verbal and written communication skills Previous experience utilizing hand tools is preferred Minimum Education High School diploma or equivalent is required Additional Information What We Offer Competitive salary and bonus structure. Comprehensive health, dental, and vision benefits package. Retirement savings plan with company match. Opportunities for professional growth and development in a dynamic industry. All your information will be kept confidential according to EEO guidelines. #LI-Onsite We are an Equal Opportunity Employer. AZZ Inc. is a Drug Free Workplace

General production employees work as a team member of one of our production lines which include the following: Bimini's, Final Finish, Floors (Decking/Framing/Vinyl-Trim), Furniture (Install/Prep), Helm (Install/Prep), Metal Jacket, Rail (Build/Install), Shrink Wrap, Saw Operator, In Floor Storage Build and Underbelly. There are two levels of Production employees at Barletta (Production I and Production II) which may be differentiated based upon and individual's specialized skills, abilities, previous work experience, and ability to work across multiple (3 or more) production departments. Individuals in any of these roles must have a strong work ethic and the ability to work in a fast-paced and team-focused environment. Barletta's culture is what sets us apart and creates a great employee experience. In addition to a Barletta Safe culture where all employees work collaboratively to create a “zero harm” work environment, we actively promote and encourage behaviors that align to our Values : 1) Treat everyone like family, 2) Always do the right thing, and 3) Relentlessly pursue excellence and our Leadership Expectations: 1) Connect with Purpose, 2) Execute with Excellence and 3) Build the future. JOB REQUIREMENTS: Job requirements for our general production positions are as follows: At least 2 years' experience working in a team-focused manufacturing environment (preferred) Must have the ability to perform all physical requirements required of the position, including but not limited to: ability to stand, walk, push, pull, bend, kneel, climb, squat for 8+ hours and lift upward of 40 lbs. Must possess good work ethic, positive attitude, and motivated to meet and / or exceed production goals. Ability to work flexible hours (overtime / weekends) if needed. Flexibility to take on additional assignments given by supervisor as required / needed to support production goals. Great attendance record and reliability Must be able to pass a pre-employment drug and background screening Supports a Barletta Safe culture by adhering to and advocating for the safest behaviors and proactively identifies opportunities to mitigate job-related risks and hazards. Ability to wear required PPE to support our Barletta Safe culture of “zero harm”. QUALIFICATIONS: Must have the ability to perform all physical requirements required of the position, including but not limited to: ability to stand, walk, push, pull, bend, kneel, climb, squat for 8+ hours and lift upward of 40 lbs. Ability to adapt to climate, inside and outside Must display good verbal and written communication skills Must be able to follow policies and procedures and wear required PPE Must be able to multi-task while remaining calm under pressure Must possess work ethic, positive attitude, and motivated to meet and / or exceed production goals. Ability to work flexible hours (overtime / weekends) if needed. Flexibility to take on additional assignments given by supervisor as required/ needed to support production goals. Great attendance record and reliability COMPENSATION AND BENEFITS: Compensation is based on past job history, knowledge, and experience. Medical/Rx HSA/FSA Dental & Vision Short and Long-Term Disability Company Paid Life Insurance and AD&D Voluntary Life, Accident, Critical Illness, Hospital, Legal, Identity Theft 401k with match Employee Stock Purchase Program Tuition Reimbursement As part of our hiring process, all candidates who receive a conditional offer of employment will be required to successfully complete a pre-employment background check and drug screening. These screenings are conducted to ensure the safety and integrity of our workplace. *This job description is intended to outline those functions typically performed by individuals assigned to this classification. This description is not intended to be all-inclusive or to limit the discretionary authority of supervisors to assign other tasks of similar nature or level of responsibility. Barletta Boats reserves the right to change or assign to this position as required.

ABOUT LOZIER Headquartered in Omaha, Nebraska, with facilities across the U.S., Lozier Corporation is the leading manufacturer of products used by retailers in stores and warehouses, with a vision to be operationally excellent in support of retail's present and future. Retailers have relied on our quality products and service for more than 65 years. BENEFITS AND COMPENSATION 1st shift: $20.16 2nd shift: $23.17 $1,000 bonus after completion of 90 days of employment (subject to taxes), applicable to new hires only. First pay increase after 6 months. PTO (Paid Time Off) plus paid holidays. Competitive Benefits Package (Eligible for medical, dental, and vision benefits on the first day of the month following 60 consecutive days of employment). Onsite Health Clinic. 401(k) with employer match. Employee Assistance Program. Educational Assistance Program. Career Development Programs. POSITION SUMMARY: Performs a variety of tasks to paint products. Individual will rotate between: Hook setter, Hang, Take-off/stack Individuals are responsible to handle a variety of parts. Individuals place hooks, hang parts and remove parts from a moving conveyor system. Individuals grasp the parts with one or two hands. The process is specific to the parts to be hung. The weight of the product will vary depending on the specific parts handled. Individuals may also work as Conveyor Cop and in Sign-Off

Who We Are and What We Do:At Corteva Agriscience, you will help us grow what's next. No matter your role, you will be part of a team that is building the future of agriculture - leading breakthroughs in the innovation and application of science and technology that will better the lives of people all over the world and fuel the progress of humankind.Corteva Agriscience has an exciting opportunity for a Production Technician to join our team at our Constantine, Michigan location! What You Will Do: Participate in harvest activities such as preparation, drying, shelling, husk oversight, product unloading, and other relevant processes Perform a variety of tasks associated with general plant, field, and warehouse operations that evolve with each season throughout the year Accurately monitor highly automated equipment for processes such as harvesting, conditioning, treating, and packing Product return and sorting activities Actively participate in conditioning activities such as sizing, gravity operation, packaging, palletizing, etc. Field activities such as scouting, inspection, and managing logistics Use of automation and computerized systems to perform work tasks (computers and iPads) Perform warehouse activities such as forklift operation, collecting samples, pooling, and other duties associated Various other duties as assigned Education: You have your High School Diploma/GED OR are willing and able to obtain your GED within twelve (12) months of hire as a condition of employment What Skills You Need: You are willing and able to do the following with or without reasonable accommodation: Climb and/or work in elevated areas, Stand, and sit for extended periods, work outdoors and indoors in hot, cold, wet, and dry conditions, lift up to fifty (50) lbs., and perform work that involves repetitive motion and lifting You are comfortable with technology and possess good a computer aptitude including the use of Microsoft Applications (Outlook, Word, Excel, PowerPoint, etc.), and are willing and able to learn other company-specific applications as required You have high diligence can multitask, maintain an organized workplace, and have excellent problem-solving skills You have a valid US Driver's License You possess good written, verbal, and interpersonal communication skills with the ability to communicate effectively with internal and external customers You demonstrate integrity and promote a positive working environment by being an initiative-taker and willing to assist team members consistently You uphold health and safety to the highest standard! You consistently help others and demonstrate adherence to safety protocols, policies, and procedures to ensure you and your colleagues go home safely every day You understand that delivering to our customers on time keeps us viable and are willing and able to work a rotating shift and overtime hours, which include nights and weekends during seasonal peaks to support production demand What Makes You Stand Out: Two-Year Technical or Associates Degree in Agriculture, Manufacturing, Operations, or a related field You have one (1) year of education and/or experience in operations, manufacturing, agriculture, or related industry Knowledge or experience with LEAN Manufacturing principles such as 5S, Continuous Improvement, and Standardized Work General knowledge and/or experience with field and/or agriculture equipment (plows, tractors, forklifts, etc.) Work Authorization and Relocation: VISA Sponsorship is NOT available for this position This position does NOT offer a comprehensive domestic relocation package Site Dedicated (100% at Corteva location): This role will be on-site at our Corteva location See what it's like to work at our Seed Production locations, please visit : ************************************************************************ Benefits - How We'll Support You: Numerous development opportunities offered to build your skills Be part of a company with a higher purpose and contribute to making the world a better place Health benefits for you and your family on your first day of employment Four weeks of paid time off and two weeks of well-being pay per year, plus paid holidays Excellent parental leave which includes a minimum of 16 weeks for mother and father Future planning with our competitive retirement savings plan and tuition reimbursement program Learn more about our total rewards package here - Corteva Benefits Check out life at Corteva! ************************************* Are you a good match? Apply today! We seek applicants from all backgrounds to ensure we get the best, most creative talent on our team. Corteva Agriscience is an equal opportunity employer. We are committed to embracing our differences to enrich lives, advance innovation, and boost company performance. Qualified applicants will be considered without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, military or veteran status, pregnancy related conditions (including pregnancy, childbirth, or related medical conditions), disability or any other protected status in accordance with federal, state, or local laws.

The Rail prep role is responsible for preparing Rails for anodizing. This includes inspecting Barletta-produced finished products for defects to ensure the highest level of quality for our customers by checking all parts for defects. Individuals in this role must have a strong attention to detail and the ability to work in a fast-paced and team-focused environment. Barletta's culture is what sets us apart and creates a great employee experience. We actively promote and encourage behaviors that align to our Values: 1) Treat everyone like family, 2) Always do the right thing, and 3) Relentlessly pursue excellence and our Leadership Expectations: 1) Connect with Purpose, 2) Execute with Excellence and 3) Build the future. JOB RESPONSIBILITIES: Inspect finished product to ensure they are built according to schedule and by print. Ability to remove defects with hand sanding. Operate small hand tools to remove burs and drill drain holes. Operate Rail Brush Machine. Ability to climb in and out of boats and work in proximity with others. Lift and carry rails from storage to prep table. Place finished rails in shipping racks. Push and pull rail delivery racks to exit doors for pick-up. Supports a Barletta Safe culture by adhering to and advocating for the safest behaviors and proactively identifies opportunities to mitigate job-related risks and hazards. JOB REQUIREMENTS: Job requirements for our general production positions are as follows: At least 2 years' experience working in a team-focused manufacturing environment (preferred) Must have the ability to perform all physical requirements required of the position, including but not limited to: ability to stand, walk, push, pull, bend, kneel, climb, squat for 8+ hours and lift upward of 40 lbs. Must possess good work ethic, positive attitude, and be motivated to meet and / or exceed production goals. Ability to work flexible hours (overtime / weekends) if needed. Flexibility to take on additional assignments given by supervisor as required / needed to support production goals. Great attendance and reliability is required. Supports a Barletta Safe culture by adhering to and advocating for the safest behaviors and proactively identifies opportunities to mitigate job-related risks and hazards. Ability to wear required PPE to support our Barletta Safe culture of “zero harm”. COMPENSATION AND BENEFITS: Compensation is based on past job history, knowledge, and experience. Medical/Rx HSA/FSA Dental & Vision Short and Long-Term Disability Company Paid Life Insurance and AD&D Voluntary Life, Accident, Critical Illness, Hospital, Legal, Identity Theft 401k with match Employee Stock Purchase Program Tuition Reimbursement As part of our hiring process, all candidates who receive a conditional offer of employment will be required to successfully complete a pre-employment background check and drug screening. These screenings are conducted to ensure the safety and integrity of our workplace. *This job description is intended to outline those functions typically performed by individuals assigned to this classification. This description is not intended to be all-inclusive or to limit the discretionary authority of supervisors to assign other tasks of similar nature or level of responsibility. Barletta Boats reserves the right to change or assign to this position as required.

The responsibility of the Machine Operator is to operate molding equipment to produce various molded products to efficiency and quality standards. Duties and Responsibilities Ensure that all necessary information and tools required for each job are in place before work begins. Pull and review setup sheets prior to starting a job. Maintains equipment required for molding machines. Stages products properly after molding and move to required staging locations. Complete all assigned projects by the due date. Review production priorities. Must meet or exceed all training requirements including those related to ISO standards and attend scheduled shift meetings or other meetings required. Meets or exceeds production targets. Produces molded products using various methods designated for the job. These methods include, but not limited to: Use of oven controls. Use of overhead crane. Use of hand and power tools. Use of pallet jack. Use of open flame. Inspects product for conformance to quality standards Knowledge, Skills and Abilities Effective communication skills Good organizational skills Ability to read and write proficiently in English Ability to use hand and power tools Ability to operate and maintain industrial equipment Education and Experience 1-2 years' experience in manufacturing preferred Working Conditions Able to work in a hot humid environment for extended periods of time. This job is in a typical manufacturing environment, to include, but not limited to: Ovens, torches, and rotating tools Forklifts and other moving machinery Loud work environment Physical Requirements Must be able to remain stationary with intermediate walking throughout the shift. Frequently lift parts weighing up to 50 pounds alone and parts more than 50 pounds with assistance and must be able to transport these up to 20 feet. Frequently positions self to maneuver around the parts, materials, and molds. Must be able to operate the hand and tools and write legible.

Job Description About Us: At Liberty Tire Recycling, we're building a sustainable future - one tire at a time. As North America's leading tire recycler, we offer a unique opportunity to make a real impact on the environment. Join our team of nearly 4,000 dedicated employees across 70+ sites and help us transform billions of pounds of waste tires into valuable resources. We're committed to innovation, a circular economy, and providing a rewarding workplace where you can grow and thrive. Job Summary: Liberty Tire Recycling has an immediate opening for a General Laborer/Production Worker. This is a manual labor position. Working in the Plant assisting with machine operation, granulation, and cleanup. Forklift experience is a plus but not mandatory. Duties and Responsibilities: Must be able to lift and load tires of all sizes: personal vehicle, truck and tractor tires. Show up on time. Daily contact requires courtesy, discretion and sound judgment. Assisting with machine operation May assist in performing routine inspections and preventive maintenance on assigned equipment and refer defects or repairs to dispatch, clean equipment. Perform all duties in conformance to appropriate safety standards. Other duties will be assigned as necessary by the company, such as truck cleaning and customer service visits to stores, to ensure they have enough work in the slow season. Skills and Abilities: Lift up to and including 50 pounds(50+ with assistance) on a routine basis. Be physically capable of loading upwards of 1,220 tires per day. Must be physically capable of climbing in a trailer unassisted in a safe manner to reduce injury. Learn to lace tires in a safe manner to prevent injury and maintain a secure load during transport. Ability to establish and maintain effective working relationships with employees, supervisors and the public. Ability to work independently with general instructions. Ability to perform heavy manual tasks under varying weather conditions. Ability to make independent judgments which have a moderate impact on the company. Education and Experience: Prior experience in the tire recycling or manufacturing industry is a plus. Compensation: $17.50 an hour. Paid bi-weekly. Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance EEO Statement: Liberty Tire Recycling is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sex, national origin, age, disability, protected veteran status, relationship or association with a protected veteran (spouses or other family members), genetic information, or any other characteristic protected by applicable law.

AZZ Inc. is a leading provider of specialized products and services designed to meet the unique needs of industrial markets worldwide. With a rich history spanning several decades, AZZ has established a strong reputation for innovation, quality, and customer satisfaction. At AZZ, our culture is defined by trust, respect, accountability, integrity, teamwork and safety ("TRAITS"). We are dedicated to our employees by fully training and equipping them and providing a safe environment to grow personally and professionally. We strive to build, maintain and create a work environment that attracts and retains employees who are high contributors, have outstanding skills, are engaged in our culture, and who embody our Company mission: to create superior value in a culture where people can grow both professionally and personally, and where TRAITS matter. As AZZ Inc. continues to evolve and innovate, it remains committed to driving shareholder value while maintaining its reputation as a leader in industrial solutions. With a strong foundation built on decades of experience and a forward-thinking approach, AZZ Inc. is poised to continue its upward trajectory, delivering sustainable growth and an unwavering commitment to excellence. Job Description AZZ has an exciting 1st shift opportunity for a production worker at our Hamilton facility. Reporting to the Operations Manager you will help handle and clean material through the galvanizing process, to help us meet customer commitments. Duties and Responsibilities Responsible for tying or assisting with tying material onto racks with wire or chain for safe movement through the galvanizing process. Use wire to tie material to bow racks, universal racks, or other tooling to prepare for the pickling tanks using specific training methods for the galvanizing process. Use rope to lift and prepare material for the pickling tanks using specific training methods for galvanizing process. Operates and visually inspects all equipment (i.e. forklifts, cranes, tooling, etc.) prior to usage to ensure no maintenance is needed. Learns to rack a variety of materials by assisting others. Racks, unracks or cleans material in order as directed. May learn to use a torch to dry materials before hot dipping. May clean material using a grinder, file, or brush as specified by the customer. Inspects material for sags, runs, drips, bare spots and reports it to management. Uses bolt cutters to remove wire from product and tooling and disposes of it per established procedures. Learns to inspect materials for holes, smothered spots, etc. Perform housekeeping activities to keep production area and equipment clean and organized. Confers with supervisors to report material conditions that could result in production or customer problems by form of damage or quality issues. May assist with training new production helpers as specified by management. Required to wear protective equipment, follow safety rules and all company policies and procedures Qualifications 1+ years of manufacturing experience preferred Must be able to lift 50 lbs Must be able to work in a non-climate controlled facility Excellent verbal and written communication skills Previous experience utilizing hand tools is preferred Minimum Education High School diploma or equivalent is required Additional Information What We Offer Competitive salary and bonus structure. Comprehensive health, dental, and vision benefits package. Retirement savings plan with company match. Opportunities for professional growth and development in a dynamic industry. All your information will be kept confidential according to EEO guidelines. #LI-Onsite We are an Equal Opportunity Employer. AZZ Inc. is a Drug Free Workplace

The Rail prep role is responsible for preparing Rails for anodizing. This includes inspecting Barletta-produced finished products for defects to ensure the highest level of quality for our customers by checking all parts for defects. Individuals in this role must have a strong attention to detail and the ability to work in a fast-paced and team-focused environment. Barletta's culture is what sets us apart and creates a great employee experience. We actively promote and encourage behaviors that align to our Values: 1) Treat everyone like family, 2) Always do the right thing, and 3) Relentlessly pursue excellence and our Leadership Expectations: 1) Connect with Purpose, 2) Execute with Excellence and 3) Build the future. JOB RESPONSIBILITIES: Inspect finished product to ensure they are built according to schedule and by print. Ability to remove defects with hand sanding. Operate small hand tools to remove burs and drill drain holes. Operate Rail Brush Machine. Ability to climb in and out of boats and work in proximity with others. Lift and carry rails from storage to prep table. Place finished rails in shipping racks. Push and pull rail delivery racks to exit doors for pick-up. Supports a Barletta Safe culture by adhering to and advocating for the safest behaviors and proactively identifies opportunities to mitigate job-related risks and hazards. JOB REQUIREMENTS: Job requirements for our general production positions are as follows: At least 2 years' experience working in a team-focused manufacturing environment (preferred) Must have the ability to perform all physical requirements required of the position, including but not limited to: ability to stand, walk, push, pull, bend, kneel, climb, squat for 8+ hours and lift upward of 40 lbs. Must possess good work ethic, positive attitude, and be motivated to meet and / or exceed production goals. Ability to work flexible hours (overtime / weekends) if needed. Flexibility to take on additional assignments given by supervisor as required / needed to support production goals. Great attendance and reliability is required. Supports a Barletta Safe culture by adhering to and advocating for the safest behaviors and proactively identifies opportunities to mitigate job-related risks and hazards. Ability to wear required PPE to support our Barletta Safe culture of “zero harm”. COMPENSATION AND BENEFITS: Compensation is based on past job history, knowledge, and experience. Medical/Rx HSA/FSA Dental & Vision Short and Long-Term Disability Company Paid Life Insurance and AD&D Voluntary Life, Accident, Critical Illness, Hospital, Legal, Identity Theft 401k with match Employee Stock Purchase Program Tuition Reimbursement As part of our hiring process, all candidates who receive a conditional offer of employment will be required to successfully complete a pre-employment background check and drug screening. These screenings are conducted to ensure the safety and integrity of our workplace. *This job description is intended to outline those functions typically performed by individuals assigned to this classification. This description is not intended to be all-inclusive or to limit the discretionary authority of supervisors to assign other tasks of similar nature or level of responsibility. Barletta Boats reserves the right to change or assign to this position as required.

Who We Are and What We Do: At Corteva Agriscience, you will help us grow what's next. No matter your role, you will be part of a team that is building the future of agriculture - leading breakthroughs in the innovation and application of science and technology that will better the lives of people all over the world and fuel the progress of humankind. Corteva Agriscience has an exciting opportunity for a Production Technician to join our team at our Constantine, Michigan location! What You Will Do: * Participate in harvest activities such as preparation, drying, shelling, husk oversight, product unloading, and other relevant processes * Perform a variety of tasks associated with general plant, field, and warehouse operations that evolve with each season throughout the year * Accurately monitor highly automated equipment for processes such as harvesting, conditioning, treating, and packing * Product return and sorting activities * Actively participate in conditioning activities such as sizing, gravity operation, packaging, palletizing, etc. * Field activities such as scouting, inspection, and managing logistics * Use of automation and computerized systems to perform work tasks (computers and iPads) * Perform warehouse activities such as forklift operation, collecting samples, pooling, and other duties associated * Various other duties as assigned Education: * You have your High School Diploma/GED OR are willing and able to obtain your GED within twelve (12) months of hire as a condition of employment What Skills You Need: * You are willing and able to do the following with or without reasonable accommodation: Climb and/or work in elevated areas, Stand, and sit for extended periods, work outdoors and indoors in hot, cold, wet, and dry conditions, lift up to fifty (50) lbs., and perform work that involves repetitive motion and lifting * You are comfortable with technology and possess good a computer aptitude including the use of Microsoft Applications (Outlook, Word, Excel, PowerPoint, etc.), and are willing and able to learn other company-specific applications as required * You have high diligence can multitask, maintain an organized workplace, and have excellent problem-solving skills * You have a valid US Driver's License * You possess good written, verbal, and interpersonal communication skills with the ability to communicate effectively with internal and external customers * You demonstrate integrity and promote a positive working environment by being an initiative-taker and willing to assist team members consistently * You uphold health and safety to the highest standard! You consistently help others and demonstrate adherence to safety protocols, policies, and procedures to ensure you and your colleagues go home safely every day * You understand that delivering to our customers on time keeps us viable and are willing and able to work a rotating shift and overtime hours, which include nights and weekends during seasonal peaks to support production demand What Makes You Stand Out: * Two-Year Technical or Associates Degree in Agriculture, Manufacturing, Operations, or a related field * You have one (1) year of education and/or experience in operations, manufacturing, agriculture, or related industry * Knowledge or experience with LEAN Manufacturing principles such as 5S, Continuous Improvement, and Standardized Work * General knowledge and/or experience with field and/or agriculture equipment (plows, tractors, forklifts, etc.) Work Authorization and Relocation: * VISA Sponsorship is NOT available for this position * This position does NOT offer a comprehensive domestic relocation package Site Dedicated (100% at Corteva location): * This role will be on-site at our Corteva location See what it's like to work at our Seed Production locations, please visit : ************************************************************************ Benefits - How We'll Support You: * Numerous development opportunities offered to build your skills * Be part of a company with a higher purpose and contribute to making the world a better place * Health benefits for you and your family on your first day of employment * Four weeks of paid time off and two weeks of well-being pay per year, plus paid holidays * Excellent parental leave which includes a minimum of 16 weeks for mother and father * Future planning with our competitive retirement savings plan and tuition reimbursement program * Learn more about our total rewards package here - Corteva Benefits * Check out life at Corteva! ************************************* Are you a good match? Apply today! We seek applicants from all backgrounds to ensure we get the best, most creative talent on our team. Corteva Agriscience is an equal opportunity employer. We are committed to embracing our differences to enrich lives, advance innovation, and boost company performance. Qualified applicants will be considered without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, military or veteran status, pregnancy related conditions (including pregnancy, childbirth, or related medical conditions), disability or any other protected status in accordance with federal, state, or local laws.

General production employees work as a team member of one of our production lines which include the following: Bimini's, Final Finish, Floors (Decking/Framing/Vinyl-Trim), Furniture (Install/Prep), Helm (Install/Prep), Metal Jacket, Rail (Build/Install), Shrink Wrap, Saw Operator, In Floor Storage Build and Underbelly. There are two levels of Production employees at Barletta (Production I and Production II) which may be differentiated based upon and individual's specialized skills, abilities, previous work experience, and ability to work across multiple (3 or more) production departments. Individuals in any of these roles must have a strong work ethic and the ability to work in a fast-paced and team-focused environment. Barletta's culture is what sets us apart and creates a great employee experience. In addition to a Barletta Safe culture where all employees work collaboratively to create a “zero harm” work environment, we actively promote and encourage behaviors that align to our Values : 1) Treat everyone like family, 2) Always do the right thing, and 3) Relentlessly pursue excellence and our Leadership Expectations: 1) Connect with Purpose, 2) Execute with Excellence and 3) Build the future. JOB REQUIREMENTS: Job requirements for our general production positions are as follows: At least 2 years' experience working in a team-focused manufacturing environment (preferred) Must have the ability to perform all physical requirements required of the position, including but not limited to: ability to stand, walk, push, pull, bend, kneel, climb, squat for 8+ hours and lift upward of 40 lbs. Must possess good work ethic, positive attitude, and motivated to meet and / or exceed production goals. Ability to work flexible hours (overtime / weekends) if needed. Flexibility to take on additional assignments given by supervisor as required / needed to support production goals. Great attendance record and reliability Must be able to pass a pre-employment drug and background screening Supports a Barletta Safe culture by adhering to and advocating for the safest behaviors and proactively identifies opportunities to mitigate job-related risks and hazards. Ability to wear required PPE to support our Barletta Safe culture of “zero harm”. QUALIFICATIONS: Must have the ability to perform all physical requirements required of the position, including but not limited to: ability to stand, walk, push, pull, bend, kneel, climb, squat for 8+ hours and lift upward of 40 lbs. Ability to adapt to climate, inside and outside Must display good verbal and written communication skills Must be able to follow policies and procedures and wear required PPE Must be able to multi-task while remaining calm under pressure Must possess work ethic, positive attitude, and motivated to meet and / or exceed production goals. Ability to work flexible hours (overtime / weekends) if needed. Flexibility to take on additional assignments given by supervisor as required/ needed to support production goals. Great attendance record and reliability COMPENSATION AND BENEFITS: Compensation is based on past job history, knowledge, and experience. Medical/Rx HSA/FSA Dental & Vision Short and Long-Term Disability Company Paid Life Insurance and AD&D Voluntary Life, Accident, Critical Illness, Hospital, Legal, Identity Theft 401k with match Employee Stock Purchase Program Tuition Reimbursement As part of our hiring process, all candidates who receive a conditional offer of employment will be required to successfully complete a pre-employment background check and drug screening. These screenings are conducted to ensure the safety and integrity of our workplace. *This job description is intended to outline those functions typically performed by individuals assigned to this classification. This description is not intended to be all-inclusive or to limit the discretionary authority of supervisors to assign other tasks of similar nature or level of responsibility. Barletta Boats reserves the right to change or assign to this position as required.

The responsibility of the Assembler is to take various molded products and trim and/or assemble them into finished goods within quality and efficiency standards. Duties and Responsibilities Pull and review work instructions prior to starting a job. Review production priorities. Ensure that all necessary information and tools required for each job are in place before work begins. Retrieves product for trimming or assembly and moves to designated areas when complete. Finishes molded product using various methods designated for the job. These methods include, but not limited to: Use of hand and power tools. Use of pallet jack. Use of hot iron. Use of open flame. Completes product labels and ensures product is identified throughout each operation. Responsible for final inspection of product and ensures that product is of excellent quality before shipping to the Customer. Use of Reporting system to record production. Knowledge, Skills and Abilities Effective communication skills Good organizational skills Ability to read and write proficiently in English Ability to use hand and power tools Ability to operate and maintain industrial equipment Education and Experience 1-2 years' experience in manufacturing preferred Working Conditions Able to work in a hot humid environment for extended periods of time. This job is in a typical manufacturing environment, to include, but not limited to: Ovens, torches, and rotating tools Forklifts and other moving machinery Loud work environment Physical Requirements Must be able to remain stationary with intermediate walking throughout the shift. Frequently lift parts weighing up to 50 pounds alone and parts more than 50 pounds with assistance and must be able to transport these up to 20 feet. Frequently positions self to maneuver around the parts, materials, and molds. Must be able to operate the hand and tools and write legible.

Since 1961, Precoat Metals (**************** has been setting the standards in the coil coatings industry worldwide. We are committed to this level of quality in both our product line and customer service, and focus our resources on investigating and implementing new coil coating technologies, developing unique coatings, ink and film systems, and designing multifaceted prints while reducing the cycle time to market. We are able to achieve this "culture of excellence" thru the hard work and talent of the people on our team. Job Description The Production Operator role is a vital part to the overall operations to the plant. And the experience you have may make you a perfect fit to join our team at our Kingsbury, IN plant. You will be called upon to assist with, and may be assigned work in, any area of the plant, including coating lines, slitting, shipping, receiving, paint vault, and packaging. Want to take your career to the next level? Working at Precoat Metals can take you down a career path of multiple opportunities, including opportunity to move into more skilled Line Operator positions. Start your success down a great career path today with Precoat Metals! Some of your Responsibilities include: Retrieves and transports bare coils and maintains flow of metal to lines by safely operating cranes, fork lifts, and upenders without damaging material or equipment. Trims, packages and bands finished coils according to customer specifications using proper skids, bands, pads, and wrapping materials. Inspects coils and identifies and reports defects. Reads and interprets production schedules. Accurately identifies proper skid and package specified on schedules. Reads and accurately records coil weights, order numbers, etc. Loads or unloads received or shipped coils onto or off of trucks. Qualifications As the selected candidate, you will need a high school level reading and writing, visual acuity to read labels, meters, gauges, documents and instructions, in addition to the following: Ability to read and comprehend written materials such as schedules, SOPs, work rules, etc. Ability to effectively communicate with all members of team. Ability to safely operate small manual and electric hand tools. Ability to work up to 12-hour shifts on a rotating schedule that includes afternoons, nights, weekends, and holidays. Additional Information We are an Equal Opportunity Employer. Precoat Metals is a Drug Free Workplace

**Who We Are and What We Do:** At **Corteva Agriscience** , you will help us grow what's next. No matter your role, you will be part of a team that is building the future of agriculture - leading breakthroughs in the innovation and application of science and technology that will better the lives of people all over the world and fuel the progress of humankind. Corteva Agriscience has an exciting opportunity for a **Production Technician** to join our team at our **Constantine, Michigan** location! **What You Will Do:** + Participate in harvest activities such as preparation, drying, shelling, husk oversight, product unloading, and other relevant processes + Perform a variety of tasks associated with general plant, field, and warehouse operations that evolve with each season throughout the year + Accurately monitor highly automated equipment for processes such as harvesting, conditioning, treating, and packing + Product return and sorting activities + Actively participate in conditioning activities such as sizing, gravity operation, packaging, palletizing, etc. + Field activities such as scouting, inspection, and managing logistics + Use of automation and computerized systems to perform work tasks (computers and iPads) + Perform warehouse activities such as forklift operation, collecting samples, pooling, and other duties associated + Various other duties as assigned **Education:** + You have your High School Diploma/GED OR are willing and able to obtain your GED within twelve (12) months of hire as a condition of employment **What Skills You Need:** + You are willing and able to do the following with or without reasonable accommodation: Climb and/or work in elevated areas, Stand, and sit for extended periods, work outdoors and indoors in hot, cold, wet, and dry conditions, lift up to fifty (50) lbs., and perform work that involves repetitive motion and lifting + You are comfortable with technology and possess good a computer aptitude including the use of Microsoft Applications (Outlook, Word, Excel, PowerPoint, etc.), and are willing and able to learn other company-specific applications as required + You have high diligence can multitask, maintain an organized workplace, and have excellent problem-solving skills + You have a valid US Driver's License + You possess good written, verbal, and interpersonal communication skills with the ability to communicate effectively with internal and external customers + You demonstrate integrity and promote a positive working environment by being an initiative-taker and willing to assist team members consistently + You uphold health and safety to the highest standard! You consistently help others and demonstrate adherence to safety protocols, policies, and procedures to ensure you and your colleagues go home safely every day + You understand that delivering to our customers on time keeps us viable and are willing and able to work a rotating shift and overtime hours, which include nights and weekends during seasonal peaks to support production demand **What Makes You Stand Out:** + Two-Year Technical or Associates Degree in Agriculture, Manufacturing, Operations, or a related field + You have one (1) year of education and/or experience in operations, manufacturing, agriculture, or related industry + Knowledge or experience with LEAN Manufacturing principles such as 5S, Continuous Improvement, and Standardized Work + General knowledge and/or experience with field and/or agriculture equipment (plows, tractors, forklifts, etc.) **Work Authorization and Relocation:** + VISA Sponsorship is NOT available for this position + This position does NOT offer a comprehensive domestic relocation package **Site Dedicated (100% at Corteva location):** + This role will be on-site at our Corteva location See what it's like to work at our Seed Production locations, please visit : ************************************************************************** **Benefits - How We'll Support You:** + Numerous development opportunities offered to build your skills + Be part of a company with a higher purpose and contribute to making the world a better place + Health benefits for you and your family on your first day of employment + Four weeks of paid time off and two weeks of well-being pay per year, plus paid holidays + Excellent parental leave which includes a minimum of 16 weeks for mother and father + Future planning with our competitive retirement savings plan and tuition reimbursement program + Learn more about our total rewards package here - Corteva Benefits (******************************************************************************* + Check out life at Corteva! ************************************* Are you a good match? Apply today! We seek applicants from all backgrounds to ensure we get the best, most creative talent on our team. Corteva Agriscience is an equal opportunity employer. We are committed to embracing our differences to enrich lives, advance innovation, and boost company performance. Qualified applicants will be considered without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, military or veteran status, pregnancy related conditions (including pregnancy, childbirth, or related medical conditions), disability or any other protected status in accordance with federal, state, or local laws. Corteva Agriscience is an equal opportunity employer. We are committed to boldly embracing the power of inclusion, diversity, and equity to enrich the lives of our employees and strengthen the performance of our company, while advancing equity in agriculture. Qualified applicants will be considered without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability or any other protected class. Discrimination, harassment and retaliation are inconsistent with our values and will not be tolerated. If you require a reasonable accommodation to search or apply for a position, please visit:Accessibility Page for Contact Information For US Applicants: See the 'Equal Employment Opportunity is the Law' poster. To all recruitment agencies: Corteva does not accept unsolicited third party resumes and is not responsible for any fees related to unsolicited resumes.