Production associate jobs in Greeley, CO

Job Title: Production Block Thrower Reports To: Production Manager Department: Production Job Status: Full-Time Job Type: Hourly/Nonexempt Essential Duties and Responsibilities include the following. Other duties may be assigned. Receives work assignments and schedules from Production Leads. Ensure the production line is supplied with necessary tools, equipment, production orders, material, etc. Demonstrates ability to operate all equipment in a safe and efficient manner that adheres to company training and safety procedures. Evaluation of product on production line to ensure it meets or exceeds quality standards. Assist with troubleshooting mechanical and operations issues and ensure production line efficiencies. Assist in the completion of production line performance results reporting. Report faulty equipment, damages, and other safety hazards to supervisor/line lead. Competency: To perform the job successfully, an individual should demonstrate the following competencies: Quality Management - Demonstrates accuracy and thoroughness. Actively promotes the production of safe quality pet proteins by participating in food safety and quality improvement meetings or teams. Responding to food safety issues or quality issues of customers, as requested. Monitoring the GMP state of the facility and employees and taking corrective actions as necessary. Attendance/Punctuality - Is consistently at work and on time. Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments. Quality - Demonstrates accuracy and thoroughness. Quantity - Meets productivity standards; Completes work in timely manner. Safety and Security - Observes safety and security procedures; meets company and departmental safety goals; Proper utilization of required PPE at all times; reports potentially unsafe conditions; Uses equipment and materials properly; actively participates in job hazard analysis and proposes potential solutions. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Must be able to complete with passing grade general labor and safety training and all required training for their position. Education/Experience: High School degree or equivalent Employment Eligibility: Ability to provide proof of U.S. Citizen or Permanent Resident (Green Card) status. Ability to pass pre-employment screening (e.g., drug screen.). Work Environment: While performing the duties of this Job, the employee is regularly exposed to work near moving mechanical parts, risk of electrical shock and vibration. The noise level in the work environment is usually moderate. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must lift and/or move up to 60 pounds without mechanical assistance. Specific vision abilities required by this job include Close vision, Peripheral vision and Depth perception. While performing the duties of this job, the employee is occasionally required to stand; sit; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl; talk or hear or smell. Equal Opportunity Employer Protein for Pets OPCO, LLC is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity, sexual orientation, national origin, ethnicity, age, disability, marital status, veteran status, or any other characteristic protected by law. Monday to Friday 6:00am to 2:30pm

PRODUCTION OPERATOR - APPLY TODAY! Starting compensation: $22.00 per hour Shamrock anticipates closing the application window for this job opportunity on or before December 31, 2025 Work takes place in a fast-paced manufacturing environment that includes both indoor and outdoor tasks, year-round. Role involves operating production machinery and warehouse equipment, following written procedures, basic math and writing skills. Essential Duties: * Operates automated machinery, including the loading of materials, package changeovers, basic maintenance activities, and cleaning of equipment. * Reads production schedules, product labels, shipping documents, and others. * Uses valves and pump controls to transfer liquid product from tanks or railcars to production vessels. * Handles materials throughout the production process, including sorting, staging, placing, and transporting materials to designated areas. * Moves materials and items from receiving or production areas to storage or to other designated areas/pre-assigned dock doors. * Sorts and places materials or items on carts, pallets, shelves, racks, or in bins or boxes according to predetermined sequence such as size, stop numbers, type and style as to prevent damage and expedite loading and put away procedures while working closely with others. * Marks materials with identifying information. * Opens bales, crates, and other containers. * Capable of learning Maintenance practices to keep equipment operational. * Other duties as assigned. Qualifications: * High School or GED preferred * Production experience or mechanical skills preferred. * Forklift (stand-up and sit-down) experience preferred. * Ability to read and interpret documents such as safety rules/signage and operational procedures. * Ability to write routine reports and correspondence * Must be able to frequently reach up to 31-77 inches and lift up to 50 pounds. Physical Demands: * The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * While performing the duties of this job, the employee is regularly required to stand; walk; reach and handle objects, tools, or controls. The employee is occasionally required to sit; climb or balance; stoop, kneel, crouch, or crawl; and communicate when necessary to complete duties. The employee must regularly lift and/or move up to 100 pounds. Specific vision abilities required by this job include ability to observe surroundings, objects, and labels at both close and far distances. The employee must regularly lift and /or move up to 100 pounds, frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 25 pounds. Corporate Summary: At Shamrock Foods Company, people come first - our associates, our customers, and the families we serve across the nation. A privately-held, family-owned and -operated Forbes 500 company, Shamrock is an innovator in the food industry and has been since being founded in Arizona in 1922. Our Mission: At Shamrock Foods Company, we live by our founding family's motto to 'treat associates like family and customers like friends.' Why work for us? Benefits are a major part of your overall compensation, and we believe offering them at an affordable cost is not only the right thing to do, but it helps keep you and your family healthy. That's why Shamrock Foods pays for the majority of your health insurance, allowing you to take home more of your paycheck. And it doesn't stop there - our associates also enjoy additional benefits such as 401(k) Savings Plan, Profit Sharing, Paid Time Off, as well as our incredible growth opportunities, continued education and wellness programs. Equal Opportunity Employer At Shamrock Foods Co all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status, sexual orientation, gender identity or any other basis protected by applicable law.

When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation's premier propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customers. Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points across the United States. Applications for this position will be accepted until 12/29/2025. Posting Job Summary (Purpose): The Utility Worker primarily works in the outside production area of the AmeriGas Cylinder Exchange facility. The employee is responsible for the processing of cylinders (20 lb. barbeque grill cylinders). Key Characteristics: Models a commitment to safety through his/her own day-to-day behavior; follows company safety procedures and policies Demonstrates high professional and personal standards; has a commitment to quality, timeliness, and continuous improvement Ability to function effectively as a member of a production team Duties and Responsibilities: Sort, inspect, clean, paint, label, and refill empty cylinders. Maintain a safety focus at all times and wear the proper PPE Ensure the consistent quality of cylinders are being processed Load filled cylinders onto the truck(s) for the next day's shipments. Ability to stand and walk 8 - 12 hours per day. Ability to lift 50 pounds repeatedly throughout the day. Perform general housekeeping duties. Knowledge, Skills and Abilities: Ability to follow processes, procedures, and instructions Ability to function effectively as a member of a production team Willingness to grow and learn Basic mechanical aptitude Basic computer knowledge Work in a fast-paced environment Be able to stand 8-10 hours per day Ability to obtain required state licensing Ability to be forklift certified Education and Experience Required: 1 - 2 years work experience in manufacturing is preferred High School Diploma or GED Working conditions: Environmental conditions such as wind, rain, ice, and snow may affect this job, as the production area where the employee spends most of the workday is not enclosed. AmeriGas Propane, Inc. is an Equal Opportunity Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices. AmeriGas is a Drug Free Workplace. Candidates must be willing to submit to a pre-employment drug screen and a criminal background check. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with AmeriGas policies. As a federal contractor that engages in safety-sensitive work, AmeriGas cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis. The pay for this position ranges from $19.00 to $20.00 , depending on circumstances including an applicant's skills and qualifications, certain degrees and certifications, prior job experience, market data, and other relevant factors. Additional compensation may include eligibility to earn a performance-based bonus or commissions on completed sales depending on position. This is the Company's good faith and reasonable estimate of the range of compensation for this position as of the time of posting. The Company offers a wide array of comprehensive benefit programs and services including medical, dental, vision, flexible spending and health savings accounts to our benefits-eligible employees. Additional benefits include retirement savings plans like 401(k) and paid days off such as parental leave, military leave, vacation/paid time off, sick leave in compliance with state law, as applicable, paid holidays, and disability coverage. Some benefits offerings are subject to any legal requirements or limitations, employee eligibility status, and where the employee lives and/or works.

Benefits: 401(k) matching Company car Competitive salary Dental insurance Free uniforms Health insurance Training & development Vision insurance Benefits: Vacation and Sick time Medical Insurance with employer shared contribution Holidays 401k matching Hourly: $23.00 - $25.00 depending on experience We are looking for someone who is ready to join a growing team in the sign and printing industry, who is coachable, and who has a great attitude. As an Installer, you'll play an important role in getting the finished sign or graphic in place so everyone can see it - in the ground, on a wall, on a vehicle or hanging from a ceiling. You'll use a variety of tools to assemble, erect and hang items, both inside and out. Fear of heights is not in your vocabulary. In fact, most of your days will be spent moving, lifting and building for a wide variety of sign installations. You'll be in a fast-paced environment with a collaborative and supportive team. Every day is challenging and different, and you'll have the opportunity to continue to hone your skills by accessing a wide range of hands-on, in-person and online training programs. POSITION DESCRIPTION Under general direction, this position is responsible for all aspects of scheduling, estimating, and performing on-site installation of signage and large format graphics. This includes a variety of flat panel substrates, post & panel projects, and application of pressure-sensitive vinyl's according to written instructions. This position must proofread signs and conduct quality assurance to ensure accurate fulfillment of projects. There is a significant degree of customer interaction in this position. Professional demeanor and appearance is required, along with a customer service focus. RESPONSIBILITIES 1. Follow instructions to accurately install a variety of flat panel signage, post and panel, and full-color graphic images in various circumstances. Interior and Exterior. 2. Maintain an accurate, written schedule reflecting all installation commitments. Set and achieve project deadlines. 3. Consult with sales staff to provide accurate estimates of labor time and to set realistic deadlines. 4. Maintain strong lines of communication with sales staff and promptly answer messages/questions. Accurately relay project details to sales staff and customers. 5. Adhere to industry-standard safety practices. Operate all tools and equipment according to specified safety requirements. 6. Perform advance site visits, obtaining and relaying necessary information for accurate quoting and production of the product. 7. Assist with general sign production duties as needed. 8. Work on multiple projects simultaneously. 9. Adhere to all company policies, procedures and business ethics codes. 10. Present and maintain a good driving record. Safely operate all vehicles and promptly report any incidents/infractions. QUALIFICATIONS High school diploma or GED required Basic math skills (adding, subtracting, multiplying, and dividing whole numbers and fractions and converting fractions to decimals and vice versa) Able to work well under pressure to output high volume, high quality work. Able to stand / kneel for long periods of time. Must have the flexibility to lean over a waist-high table and use back forth hand motions to apply vinyl letters and graphics to a substrate. Able to lift 50 or more pounds Able to use light power equipment Must be physically able to perform sign installations, which includes lifting, climbing, and working at heights greater than 10 feet This Franchise is independently owned and operated by a franchisee. Your application will go directly to the Franchise Owner, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchise should be made directly to the franchise location, and not to FASTSIGNS Corporate. Compensation: $23.00 - $25.00 per hour At FASTSIGNS, every day is unique and presents exciting opportunities, including new ways to use your talent and grow your skills. We have a large network of independently owned locations - both locally and internationally - who offer competitive pay and ongoing training opportunities. Are you ready to plan for your future? Discover your next career. Make your statement. Learn more by exploring the positions offered by FASTSIGNS centers. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to FASTSIGNS Corporate.

Acme Manufacturing has an opportunity available for a new Machine Operator! This position has a starting range of $22.00 - $23.50 per hour and is eligible for our full benefits package, including health, dental, life, 401k, and on-demand payment options to access your pay when you need it. This position will work on-site at our facility near I-70 and Monaco. This is an ideal job for mechanically inclined individuals seeking experience in the manufacturing industry, stable hours, reliable pay, and a set schedule. Starting Pay: $22.00 - $23.50 per hour with on-demand pay options available. Shift Available: Monday-Friday, 6:00am - 2:30pm (5, 8-hour shifts) Benefits: Medical, dental, vision, short term and long-term disability, 401(k), paid holidays, vacation, and on-demand payment options to access your paycheck when you need it. Job Duties and Responsibilities: Acme Manufacturing Company is a prime manufacturer of a variety of metal products. We are currently seeking an experienced machine operator or an individual looking to become a machine operator. Our Machine Operators work with a variety of heavy manufacturing equipment producing metal products including threaded and unthreaded rod, sheet metal, landscaping edging, angled pieces, and more. Other responsibilities include: Adherence with our safety regulations. Material handling, loading, and unloading of machines. Basic maintenance including making adjustments, lubrication, and set-up. Performing quality checks on finished products. Lifting, bending, and preforming repetitive, physical, tasks. Who we are seeking in an applicant: We are willing to train someone to run various types of machinery if they are willing to learn and have good mechanical aptitude. Other qualifications include: Ability to work independently and make sound decisions. Proficient using gauges, tape measures, and other basic hand tools. Ability to document production and quality standards information. Familiarity with and willingness to adhere to warehouse and manufacturing safety standards. Ability to lift up to 75 lbs. and interact in a physically demanding position. Willingness to spend most of the day on your feet. Who we are: Acme Manufacturing is a Denver-based company located at I-70 and Monaco, about 5 miles east of Downtown Denver. We manufacture and distribute metal products used mainly in the building trades. We employ a diverse range of people from all walks of life. Our team members are passionate about what they do, and we are in turn dedicated to our talented personnel. We believe a company is as successful as its employees, and we strive to provide a positive, inclusive, and engaging work environment. We work collaboratively as a team to achieve our goals and offer great employee perks to attract top talent, leading to life-long careers. Over the past 30 years the Acme Manufacturing family of brands has grown to include a wide variety of quality products - this includes metal shapes and sheet, garage door parts, landscape products, decorative door hardware, chain, and threaded products. A career at Acme includes advancement opportunities, cross-training between roles, employee enrichment programs and a great workplace community. We offer competitive salaries and benefits packages, as well as bonus opportunities.

Join a 2024 USA Top Workplace at our state-of-the art milk processing plant in Platteville, CO as a Production Operator. From cow to carton, to everyone, everywhere, we bring organic milk to mainstream America. We provide an excellent benefits package, competitive wages and an exciting work environment. We seek team-oriented members who are looking for a career opportunity to grow and learn. Job Summary: The operator is responsible for equipment operation while maintaining quality standards, adhering to recognized GMP standards and performing the required procedures to ensure the integrity of the product. Essential Job Results: All plant personnel have the responsibility to monitor and report any deviations from our Food Safety and Food Quality (HACCP & SQF) programs to your immediate supervisor. Monitor and report any deviation from the Food Safety & Food Quality program. Responsible for operation/ CIP of half gallon & gallon filling equipment and protocols. Maintain proper customer carton supply following script without interfering with production and efficiencies. Perform Dye checks as well as Titrate Sanitize tank every hour. Perform case packer and blow mold duties and will be required to palletize. Maintain constant communication with lab, processing and case packers. Milk receiving responsibilities. Complete all required documentation. Education and Experience: High School Diploma or equivalent. Ability to comprehend GMP standard and quality control measures. Previous filling equipment experience is preferred, but not required. Strong work ethic and the ability to handle multiple tasks Physical Requirements Must possess the physical ability to work the entire shift on the plant floor working in a cool, wet environment with temperatures ranging between 34-38 degrees will be a requirement. Standing, walking, climbing, repetitive bending, repetitive stooping, repetitive reaching with arms and repetitive grasping with hands and fingers. Must have the ability to lift up to 30 pounds frequently and up to 50 pounds occasionally. Must be able to work safely in a fast-paced environment working around production machines, warehouse equipment, forklifts, large trucks and tankers Benefits: 401(k) plan with company match Medical Insurance Dental Insurance Vision Insurance Company Paid Group Life Insurance Voluntary Life Insurance Voluntary Short-Term Disability Voluntary Long-Term Disability Voluntary Accident, Cancer Coverage Employee Assistance Program Paid Time Off Company Holidays Floating Holidays Personal Leave Family Care Leave Free Milk Costco Membership Reimbursement

At Areté, we are on the forefront of developing innovative solutions, with great minds from all backgrounds, to help solve the nation's most complex security challenges. We strive for an inclusive, collaborative team environment that approaches differences as opportunities for innovation and excellence. As an employee-owned company, we foster an atmosphere that propels diverse career opportunities and professional growth. Discover your future with us. As an Electronics Technician for production at Arete, you will be responsible for assembling the electronics and necessary subassemblies for AIRTRAC lasers. These assemblies require soldering, following procedures, and reading schematics and drawings. You will also be responsible for the construction, integration, and test of custom cabling harnesses. You will be working with a team of scientists, engineers, and technicians to assemble, test, and calibrate electronics for lasers. You will also contribute to building, testing, troubleshooting, repairing, and modifying developmental and production electronic systems independently, or under the direction of an electrical or optical engineer. This position is based in our Niwot, CO office. This is a non-exempt, non-supervisory, full-time position. If you're looking for a rewarding career in a fast-paced and innovative environment, Arete could be the perfect fit for you. We have an impressive range of benefits, programs, and perks that we offer: Health & Wellness: Medical, Dental & Vision Insurance Life and Long-Term Disability (LTD) Vision Reimbursement Fitness Reimbursement Financial: 401(k) Retirement Plan Contributions Employee Stock Ownership Plan (ESOP) Continuing Education Assistance Work-Life Balance: Flexible Scheduling Paid Time Off (PTO) Paid Parental and Bereavement Leave What We Value: Creativity and innovation in solving challenges Integrity and responsibility in all actions Collaboration across teams and specialties Responsiveness in fast-paced environments Passion for national security and excellence Experiences and Background We Look For (required skills): Familiarity with electronic test equipment such as oscilloscopes, current clamps, AC/DC power supplies, and multimeters Ability to produce professional documentation and thoroughly document setups and testing results. AA/AS in a Technical or Engineering field or similar relevant discipline. Minimum 2 year of experience preferred, and significant relevant experience may substitute for educational requirement. Good communication skills Ability to learn new skills quickly in a fast-paced work environment Highly organized and detail oriented Good consistent work ethic Nice to Have (preferred skills): Good computer skills Soldering experience, especially J-STD-001 certification Strong fine motor skills; ability to work on small assemblies under a microscope The salary range for this role is $60,000 to $65,000; however, Arete considers several factors when extending an offer of employment, including but not limited to: the position and associated responsibilities, a candidate's work experience, education/training, and key skills. Other Considerations Areté is committed to the principles of equal employment opportunity and nondiscrimination, and we believe every person has the right to be treated with fairness, dignity, and equal consideration. Areté is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, marital status, national origin, age, veteran status, disability, or any other characteristic protected by applicable federal, state, or local law. U.S. citizenship is required to meet position eligibility. Successful passage of a criminal background screen is required to meet position eligibility. Selected applicants will be subject to a government security investigation and must meet eligibility requirements for access to classified information. Areté will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring. Successful passage of a Department of Transportation (DOT) drug test is required to meet position eligibility. If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our website because of your disability. To request an accommodation, please contact Areté Human Resources at ************ for assistance.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at *********** We're always looking for talented individuals to join our team. Whether you're an experienced manufacturing professional or just starting your career, TTM offers a supportive workplace where all skillsets can thrive. Why Join Us? At TTM, we believe in offering our employees an environment where they can make a real impact on the work we do. Here's a look at what we provide our employees to set them up for success. * Career Development: We invest in your growth - our Operator Advancement Program supports your goals. We provide operators and assemblers at all levels the opportunity to certify their skills and build their career with us up to 3 times a year by applying to the OAP program. TTM promoted 68% of applicants in the program's first year! * Competitive Compensation: We offer a competitive package that reflects your skills and experience along with annual compensation reviews to ensure your growth is aligned with your performance and market trends. * Comprehensive Benefits and PTO: Including health, dental, and vision insurance to keep you at your best. Enjoy 10 paid holidays and 3 weeks of paid time off annually to recharge. TTM strives to invest in our team members at all levels - starting on your first day. To support the growth and development of our new hires, this position is eligible for a 90 Day Evaluation that includes a pay increase if key performance indicators are met. Scope: The primary responsibilities of a Production Operator include: Setting up, operating, maintaining, and troubleshooting manufacturing production equipment. 2nd shift schedule of 3 PM - 11:30 PM, Mon-Fri. The work location for this position is 8192 Southpark Lane, Littleton, Colorado. Duties and Responsibilities: * Adherence to production time sensitive disciplines * Set and maintain processing equipment within operational parameters * Meet or exceed expected output targets and metrics * Read blueprints and comprehend the English instruction documents and engineering notes to take individual/specific action to produce precisely designed products * Strict compliance to all safety and quality guidelines * Follow dispatch as required while making allowances for schedule changes to accommodate for Hot Orders and customer requirements * Work closely with others in a team environment * Demonstrate a strong, customer-focused culture * Operate with a true sense of urgency * Exact adherence to process requirements Note: The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer. Essential Knowledge and Skills: * Good mathematical skills. * Basic computer skills and mechanical aptitude * Use measuring tools such as pin-gauges and calipers * Read and understand blueprints * Outstanding attention to detail * Ability to produce high quality product under pressure * Ability to stand on feet for 8 hours, lift up to 30-50 lbs. and work in noisy environment * Able to read and interpret travelers and oral and written work instructions in English. * Ability to understand and follow all safety requirements. Education and Experience: Education: * High school diploma or GED. Required Experience: * No experience required. We can train candidates with the essential knowledge and skills. Preferred Experience: * Previous machining or CNC experience. * Previous printed circuit board manufacturing experience preferred. General manufacturing experience helpful. #LI-MP1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $36,948 - $58,402 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency (“RF”) components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards (“PCB”s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at *********** We're always looking for talented individuals to join our team. Whether you're an experienced manufacturing professional or just starting your career, TTM offers a supportive workplace where all skillsets can thrive. Why Join Us? At TTM, we believe in offering our employees an environment where they can make a real impact on the work we do. Here's a look at what we provide our employees to set them up for success. Career Development: We invest in your growth - our Operator Advancement Program supports your goals. We provide operators and assemblers at all levels the opportunity to certify their skills and build their career with us up to 3 times a year by applying to the OAP program. TTM promoted 68% of applicants in the program's first year! Competitive Compensation: We offer a competitive package that reflects your skills and experience along with annual compensation reviews to ensure your growth is aligned with your performance and market trends. Comprehensive Benefits and PTO: Including health, dental, and vision insurance to keep you at your best. Enjoy 10 paid holidays and 3 weeks of paid time off annually to recharge. TTM strives to invest in our team members at all levels - starting on your first day. To support the growth and development of our new hires, this position is eligible for a 90 Day Evaluation that includes a pay increase if key performance indicators are met. Scope: The primary responsibilities of a Production Operator include: Setting up, operating, maintaining, and troubleshooting manufacturing production equipment. 3rd shift schedule of 11:00pm - 7:30am, Mon-Fri. The work location for this position is 8192 Southpark Lane, Littleton, Colorado. Duties and Responsibilities: Adherence to production time sensitive disciplines Set and maintain processing equipment within operational parameters Meet or exceed expected output targets and metrics Read blueprints and comprehend the English instruction documents and engineering notes to take individual/specific action to produce precisely designed products Strict compliance to all safety and quality guidelines Follow dispatch as required while making allowances for schedule changes to accommodate for Hot Orders and customer requirements Work closely with others in a team environment Demonstrate a strong, customer-focused culture Operate with a true sense of urgency Exact adherence to process requirements Note: The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer. Essential Knowledge and Skills: Good mathematical skills. Basic computer skills and mechanical aptitude Use measuring tools such as pin-gauges and calipers Read and understand blueprints Outstanding attention to detail Ability to produce high quality product under pressure Ability to stand on feet for 8 hours, lift up to 30-50 lbs. and work in noisy environment Able to read and interpret travelers and oral and written work instructions in English. Ability to understand and follow all safety requirements. Education and Experience: Education: High school diploma or GED. Required Experience: No experience required. We can train candidates with the essential knowledge and skills. Preferred Experience: Previous machining or CNC experience. Previous printed circuit board manufacturing experience preferred. General manufacturing experience helpful. #LI-MP1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $36,948 - $58,402 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

Job DescriptionProduction Worker in Take Down/Quality/Packaging - 2nd Shift Premium Powder Coating seeks a consistent and reliable employee who's looking for long term employment. PPC is one of the largest and cleanest powder coating facilities in Colorado. Our location is a 60,000 square facility located in Longmont. PPC has been in business 23 years and is expanding. Employees work 40 hours per week with the opportunity of overtime. Advancement opportunity within the company is available and encouraged for those who are eager to learn new skills. Day to day responsibilities: Parts Inspection and Quality Control of powder coated product. Takedown parts from racks using crane, lift or other methods. Package parts to customer's specification using foam, cardboard, or other protective product prior to wrapping and strapping pallets Maintaining hooks and plugs Attention to detail is key for any applicant. This is a production position you will have the opportunity to move to different departments as you gain experience. Position requires the ability to lift 50+ pounds, bend, reach and stoop throughout the day. You must be able to be on your feet for an 8 plus hour shift. Excellent attendance is critical to your success in this position. Application are being taken for second shifts: Second shift from 12:00 p.m. to 9:00 p.m. Monday through Friday. Starting pay is based on like experience in coating between $18.00 and $20.00 per hour. Benefits include a wide array of medical plan options, dental, vision and supplemental coverages. The company also offers a 401K Plan. Job Type: Full-time Powered by JazzHR TA9KrVXfEu

At EVRAZ, our strength starts with our people! As a team we collaborate to solve problems, contribute ideas and challenge each other to ensure growth and ultimately success for the business and our employees. Job Summary and Responsibilities EVRAZ North America is looking for an enthusiastic individual who excels in providing customer service and administrative support to join our team in Denver, Colorado. If you are someone who is willing to learn and can provide great customer service, this position is for you! The ideal candidate will enjoy a fast-paced work environment, have a friendly demeanor, and be customer and safety focused. No day is the same at EVRAZ North America and the skills you learn here cannot be learned anywhere else. What are you waiting for? Apply today! Would you like to work in different areas of the company? If you are a multitasker who likes a good challenge, we have the right job for you. This Production Operator job is like no other! In this role you will work with multiple groups across the organization: working outdoors at the rail car scale, helping with paperwork, inspecting scrap materials while providing excellent customer service, working inside the scale office and performing various administrative duties. EVRAZ is committed to maintaining and promoting a safe, healthy and injury-free environment. It is required for all jobs. Field phone calls, provide pricing and assistance to customers, direct phone calls to the applicable party Cut scale commodity cheques, review for accuracy and seek required approvals Pay out suppliers according to their payment terms, envelope cheques Maintain office/scale house records, file all paperwork as needed, ensure filing systems and tracking spreadsheets are maintained and up date Accurately enter data into spreadsheet's and company operating systems Maintain an organized scale house and ensure all paperwork is up to date and is filed properly Maintain office equipment, keep required materials stocked Ensure office supplies are fully stocked Create rail car manual tickets during loading in the yard Coverage for absences (sick, vacation, etc.) for scale operator/yard inspector/NF warehouse Coverage duties include but are not limited to: Weighing customers over the truck scale Inspecting material for quality control and trash deductions in the yard Sorting NF materials in the warehouse Performs other duties as they might be assigned Requirements Must have High school diploma or GED 1-2 years of experience working in an office setting Must have reliable transportation Willing and able to work in variable weather conditions including hot, dry summer conditions and cold, harsh winter conditions Basic math skills Proficiency with Microsoft Office, including Windows, Outlook and Excel Strong communication and organizational skills; ability to interact productively with supervisors, fellow peers, and customers Ability to multitask, react to changing conditions and function well under the pressure of deadlines Excellent customer service, committed to making sure that all purchases are handled professionally and expeditiously Scrap yard experience is a plus Compensation: $22.60 to $25.30 depending upon experience Our total compensation package includes amazing benefits! A bonus may be paid to eligible employees based upon organizational and individual performance Family medical, dental, and prescription coverage at minimal employee cost Short and long term disability programs Retirement Account contributions and (401k) with employer match Flexible Spending and Health Savings Accounts Employer-provided Group Life and Voluntary Life Insurance options Paid vacations, sick time and 10 paid holiday days per year Apprenticeship and career advancement within the company Tuition reimbursement Wellness program All applicants must be eligible to work in the USA without sponsorship. While we thank all those who apply, only those being actively considered for employment will be contacted. Equal Opportunity Employer EVRAZ North America is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status. EVRAZ North America is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail ******************* or call: **************. We will make a determination on your request for reasonable accommodation on a case-by-case basis. Join a team that manufactures excellence, drives success and builds careers!

As a second-generation, family-owned enterprise, RK Industries, LLC (RK) offers a diverse range of construction, manufacturing, advanced fabrication and building services. Led by Rick and Jon Kinning, RK represents seven distinct lines of business that work together to provide seamless project collaboration. Our exclusive building methodologies, accredited safety standards and professional execution allow us to turn our customers' greatest concepts into reality. Position and Responsibilities: * Operate production machinery. * Must be experienced operating variety of CNC fabrication equipment * Must be able to Read Drawings and tape measure, understand decimals and do complex calculations * Experience with G-Code and Python machine a plus * Inspects and documents product compliance. * Handle materials. * Structural Fabrication Experience a plus Qualifications: * Working knowledge of capacities of equipment. * Maintains time records accurately. * Work closely with other fabricators and labors to improve their skills. * Maintenance of equipment. * Work with shop foreman to ensure production goals are met. * Communicate status of orders to the shop superintendent. * Perform other assignments as directed by shop superintendent. Company Benefits * Comprehensive medical plans with HSA and FSA options for you and your family. * Generous 401(k) plan with immediate company match - 100% vested. * Dental and vision insurance for your well-being. * Short-term and long-term disability plans available after one year. * Company provided life insurance and AD&D with options for supplemental buy-ups. * Enjoy paid time off and holidays. * Get paid weekly for your convenience. In-house Programs * Elevate your skills with career development training at RK University. * Unlock discounts on essential products and services like phones, internet and work apparel. * Participate in fun company and team-building events. * Make a difference with volunteering opportunities. Partnership Programs * Access confidential counseling for personal issues and financial advice. * Enjoy exclusive discounts on entertainment, including amusement park tickets and restaurant specials. Safety is Our Top Priority: * Comply with all company policies and procedures. * All employees are accountable for safety and health and are empowered to stop work if an unsafe condition is present. Employees should immediately notify their supervisor so that the hazard may be corrected. * RK Mechanical employees and subcontractors are required to implement and maintain all safety and health systems practices including the training requirements of RK Mechanical Orientation, shop specific orientation, CPR/First Aid/AED/Bloodborne Pathogens, Hazard Identification and Reporting, and OSHA 10. Minimum Physical Requirements: * Work outside, inside, and in dusty, noisy and hazardous areas. * Work in high places, tight places, confined spaces and/or other adverse locations. * Climb, balance, squat, kneel and crouch. * Work in all types of weather. * Must have working knowledge of all trade materials and tools. * Ability to lift and carry 51 to 75 lbs. occasionally, and/or 31 to 45 pounds of force frequently, and/or greater than negligible up to 16 to 22 pounds of force constantly to move objects Why RK is a Great Place to Work At RK, we take immense pride in our diverse business units, each specializing in delivering exceptional projects, products and services to our customers. What sets us apart is our unique ability to integrate these services, providing comprehensive solutions and offering our employees ample opportunities for growth and learning across different businesses. * RK Mechanical: commercial and industrial plumbing, mechanical, process and HVAC contracting. * RK Steel: custom fabrication and manufacturing of structural steel and miscellaneous metals for various industries. * RK Electrical: commercial and industrial electrical contracting and service. * RK Water: groundwater dewatering and remediation, facilities water treatment and custom fabrication. * RK Service: commercial and industrial building and maintenance services. * RK Energy: custom fabrication for various industries requiring ASME and modular skidded solutions. * RK Mission Critical: design and manufacturing for off-site constructed modular solutions. Our commitment to excellence has been recognized with numerous awards for our outstanding performance and contributions, including high rankings in various categories from the Denver Business Journal and ABC's Top Performers by Market, illustrating our broad expertise. We've been consistently recognized as a top private company and a leading employer by ColoradoBiz Magazine, and we're proud of our long-standing position as number one in the Top 50 Family-Owned Companies since 2011. Our strong commitment to safety, wellness and employee development has earned us prestigious accolades: * ABC Step Awards * ACCA Award Member * AGC Safety Utah * American Heart Association Fit-Friendly Worksite Award * Wellness Workdays and Harvard Medical School Best Wellness Employer Certification * Colorado Workforce Development Council Excellence in Apprenticeship Award * Business Experiential Learning Commission Colorado Apprentice Award In addition to our engagement with the community, we have been acknowledged in: * Denver Business Journal Corporate Philanthropy rankings * Named among The Civic 50 Colorado as one of the most community-minded companies Each of our business units has its own impressive list of awards and recognitions, such as: * Engineering News Record Top 20 Firms in Steel Erection * ABC Excellence in Construction Awards * AGC Awards for Construction Excellence * Xcel Energy Top Trade Partner in Energy Efficiency * USGBC LEED Program Member * IECRM Annual Summit Awards * MFG Magazine Colorado Manufacturing Awards We also adhere to rigorous quality standards and accreditations, including: * ISO 9001:2015 * ISO 14001:2015 * ISO 45001:2018 * AISC certifications As a new member of our team, you'll be joining a company that's not just award-winning but is also consistently striving to exceed expectations and deliver excellence in all we do. Become an essential part of our thriving and dynamic team, where your contributions will drive our continued success. Hourly Wage $25-$30 *

ARC is looking for a Full-time Print Production Operator to help us continue to provide the best employment experience for employees; and, continued excellent service for our customers. ARC Document Solutions is seeking an experienced Print Production Staff member for Print Production Department. In this position, you will receive and process wide-format print work utilizing small & large-format black and white printers. If you have a background specifically with large format digital printing, then this might be a job for you. This is a hands-on role and will require expert knowledge of large-format equipment- including techniques for the pre-press, printing, cutting, finishing, and installation. Description: The Print Production Operator works directly with the Operations teams by coordinating and processing orders for material or merchandise received by mail, e-mail, fax, telephone, or personally from customers. The ideal candidate would have previous print experience with small-format AND large-format printers. The job would also include binding, laminating, and other finishing duties. Basic knowledge of computers is expected. * Receive, process, and maintain orders, and prioritize work assignments based on customer needs, workload, and machine capabilities. * Process PDF, and graphics files that come in e-mail, delivery, walk-in, or other methods. * Ensure the required resources are available to complete the job (media, fonts, graphics, etc.). * Evaluate output and adjust to obtain the desired level of image quality. * Troubleshoot problems that occur during job submission or the printing process. * Inspect finished work for sharpness, the density of line, position, count, and sizes. * Minor maintenance functions include cleaning, replenishing consumables, replacing filters, and waste containers. * Provide good customer service to maintain current accounts and enhance the company's image. * Process, comprehend, and follow detailed written and verbal instructions. * Gather, organize, and wrap completed work for delivery to customers or the next department. * Report mechanical failure to the Production Manager or Branch Manager. * Load and unload print materials and help maintain a safe and clean environment Experience and Qualifications: * Minimum (3) years experience in large-format production * Knowledgeable in the movement of materials through the printing process * Must be able to use and read a standard tape measure * Able to lift a minimum of 50 lbs. on a consistent basis * Ability to report to work as scheduled to support business operations * Willing to work reasonable overtime when needed to meet customer demands and shop goals. * Able to work in a fast-paced, high-pressure environment. * Self-motivated with the ability to work independently, and resourcefully with minimal oversight We have Great Cultural Fit: We are one team, one company. We are blessed with an outstanding culture and maintaining this is something very important to all of us. The right candidate can succeed in a team environment. ARC Document Solutions, LLC (NYSE: ARC) provides technology and services to businesses of all types, with a focus on the architectural, engineering, and construction industry, in thousands of customer locations nationwide, 170 worldwide service centers, and secure document storage in the cloud. Find out more at ************** If you require reasonable accommodation for any part of the application or hiring process due to a disability, please submit your request to ************** and use the words "Accommodation Request" in your subject line. To all recruitment agencies: ARC does not accept unsolicited agency resumes. Please do not forward resumes to our Careers alias or other ARC employees. ARC is not responsible for any fees related to unsolicited resumes. We are an Equal Employment Opportunity ("EEO") Employer. It has been and will continue to be a fundamental policy of ARC Document Solutions and RIOT Creative Imaging not to discriminate based on race, color, creed, religion, gender, gender identity, pregnancy, marital status, partnership status, domestic violence victim status, sexual orientation, age, national origin, alienage or citizenship status, veteran or military status, disability, medical condition, genetic information, caregiver status, unemployment status or any other characteristic prohibited by federal, state and/or local laws. This policy applies to all aspects of employment, including hiring, promotion, demotion, compensation, training, working conditions, transfer, job assignments, benefits, layoff, and termination. pm20

Job Description Ripple produces the most innovative and consistent products in the marijuana market, including: Ripple Dissolvables, the O.G. fast-acting, water-soluble powder; Ripsticks, the most convenient and fun way to get the fastest THC; and Ript, our fast-growing value gummy line. At Ripple, our mission is to improve people's lives through cannabinoids. We give people consistent experiences they can count on, and we give those experiences two times faster. We pride ourselves on great products, great people, and great science. We are singularly focused on quality, which to us means doing things the right way, right from the start. We know that success isn't found in shortcuts or silver bullets. We put in the work, and damn right we're proud of it. This is a wild, wild industry, and we love working in it, but only with those who want to do things right. About the job We're looking for a full-time Production Operator who values safety, trust, accountability, and a strong work ethic. Here at Ripple you'll find a culture that values engagement, flexibility, and high feedback. If you're punctual, positive, and eager to actively participate in building new processes and capacity, this is the place for you. At times, mandatory overtime may be required, and flexible schedules are a must. Hours may change based on business needs. The current schedule is generally M-TH 6:00am - 4:30pm. Schedule subject to change to meet the needs of the business. Essential Duties and Responsibilities: Packaging and labeling products. Washing dishes and small wares. Assist with scheduled cleaning of facility Attention to detail and product quality. This is critical to the role. Perform and record regular quality checks. Adjust process according to quality results to achieve target quality parameters. After a successful period of training, set up, shut down, and clean up equipment for daily production. General maintenance of equipment as required. Any other duties assigned by the Production Manager or Leads. Qualifications: Must be 21+ years of age with a current MED Badge or the ability to obtain one. Manufacturing experience, with food manufacturing experience a plus! Able to stand for hours at a time, work in a hot environment, and lift 50 lbs. Read and write English to be able to understand and follow Good Manufacturing Practices (GMP) and Standard Operating Procedures. Must be reliable and able to attend the workplace in person daily. What you'll love about us: We are a team of competent, motivated, diverse, and decent adults. Named as one of America's Top Cannabis Employers of 2022, we offer: competitive compensation, PTO, 13 paid holidays, paid sick leave, paid parental leave, 80% paid medical benefits and 100% paid dental and vision benefits, 401k and a fun, relaxed working environment. We too value health, relaxation, and spending time with friends and family! We are incredibly transparent about our standards and expectations, and we honor that transparency with honest feedback and timely compensation. We believe trust and accountability are two-way streets. For more details on the culture we foster, visit: Values, Culture, and Other Stuff Compensation: $20/hr

JOB TITLE: Production Operator DEPARTMENT: Production SUPERVISOR: Production Supervisors COMPENSATION: Full Time - Non-Exempt ($18-20/hour) REPONSIBILITIES Strict adherence to manufacturing guidelines including, Safety, GMP and SQF Ability to follow verbal and written directions. Eagerness to learn all aspects of equipment operation, including troubleshooting. Maintain a clean and organized working area. Willing to work in a fast-paced environment. Able to stand during a 10-hour shift and lift up to 55lbs. KEY EMPLOYEE TOUCHPOINTS Production Supervisor/s QA Manager and Technicians Maintenance Manager Director of Operations POSITION QUALIFICATIONS High School diploma or equivalent education Basic mathematical skills Flexible schedule, able to work occasional nights and weekends Be a team member EXPERIENCE 1-2 years of food or FMCG manufacturing experience preferred Previous experience with operating of manufacturing equipment Food handling and manufacturing knowledge preferred ADDITIONAL COMPETENCIES Fluent English required. Bilingual preferred Hobart equipment knowledge WORK SETTING: In-person ABILITY TO COMMUTE/RELOCATE: Thornton, CO 80023: Reliably commute or planning to relocate before starting work (Required) WORK LOCATION: ONE LOCATION

Job Description Leather Worker Must live in Colorado, specifically, in or near the Denver Metropolitan area. This is an onsite position. Hours: M - F 7:30 AM - 4:00 PM Our Company: The Hunter Company has been building top quality leather scabbards, holsters, rifle slings, belts & accessories for over 70 years. Our products are made right here in Colorado by a team of talented leather craftsmen and women. Here at Hunter Company, we strive to provide the very best for our customers and look forward to many, MANY more years of service. Hunter believes in keeping our team close. We care for one another and continue to provide the 2nd amendment-loving community with the finest leather holsters, slings, and accessories made right here in America. The Work: We are seeking a highly motivated individual who holds themselves to high standards when it comes to quality and innovation. We need a creative and skilled individual to assemble custom leather holsters and help assist warehouse manufacturing needs. We are a fast-growing company ensuring the opportunity to those with the motivation to take initiative and learn new skills to advance within the company. The right candidate will train with a leather craftsman who will guide you to be a versatile, skilled leather craftsman. Qualifications: Manage production of Hunter leather goods. Cut, shape and mold top grain leather holsters. Operate machinery, assembly tools, and equipment. Sewing experience is a plus. Problem Solve issues that arise during production. Meet established time guidelines for various steps and projects. Perform quality control inspection of finished products. Utilize provided safety equipment and adhere to best practices. Communicate well with the team regarding holster models to fit specific guns. Must have a reliable source of transportation. Previous experience in manufacturing, assembly, or other related fields. Experience with holster making and working with leather is a plus, but willing to train the right candidate. Job type: Full time Experience: Leather experience: 1 year preferred Firearm Knowledge: Preferred Job Type: Full-time Salary: $18.00 - $20.00 per hour Experience: Leather: 1 year (Preferred) Manufacturing: 1 year (Preferred) Additional Compensation: Health, dental, vision, LT disability, and life insurance available after 90 continuous days of employment. Work Location: One location This Job Is: Military experienced candidates are encouraged to apply. Schedule: Monday to Friday

The Production Worker is under the direction of the shift supervisor and will primarily be responsible for assembly of reconditioned products using established production procedures, following safety protocol, and adhering to company's quality standards. Responsibilities: Demonstrates ability to meet production standards on specific assignments within required time Maintains good housekeeping and clean work areas in assigned space Performs all assignments in accordance with safety specifications, instructions, and requirements Responsible for safety and quality throughout production Responsible for notifying a Production Lead or Supervisor when they step off the line to ensure safety and quality standards are maintained Reports all production waste/issues to Production Lead or Supervisor Performs other duties as required by Supervisor or Manager Follows all company policies and procedures Requirements: Experience working in a Manufacturing Environment Ability to work in a fast paced environment Understand plant safety guidelines and pass all required safety training Must be able to understand verbal and written instructions Troubleshoot problems and report issues Must work well in team environment Physical Requirements: Ability to be on feet up to 8-12 hours per shift Use of hands and fingers to perform job function Ability to stoop, kneel, bend and climb Ability to lift up to 35lbs Pay Range The range is $14.81 - $20.00 per hour. Exact salary offered will depend on candidate's experience, work location, skills, etc. Benefits Mauser Packaging Solutions offers a comprehensive benefits package, including medical, dental, paid time off, and other competitive benefits.

Advantage Resourcing provides workforce recruiting and placement services. As one of the world's leading staffing companies, our primary objective is clear-cut: To perfectly align the best people with appropriate positions around the globe. Through contingent, contract and direct hire services, the specialized recruiters at Advantage Resourcing place career-minded people in a wide variety of jobs in different fields. Advantage Resourcing offers a number of services to help you find the job for you. Regardless of the career stage you may be in-identifying work interest, searching for that first job, looking to take the next step-Advantage Resourcing can help you discover the personal and career success you desire. Job Description Are YOU looking for your next great job opportunity? We are seeking entry level and experienced Production Operators to join our team! Temp to hire, great benefits, excellent employer to work for! Title: Production Operator Shifts: 1st shift pays $11.00 an hour Monday through Thursday 10 hour days 5:00am to 3:30pm or 6:00am to 4:30pm (overtime on Friday's is required when there is a high demand of product) Shifts: 2nd shift pays $11.50 an hour Monday through Thursday 10 hour days 4:00pm to 2:30am or 5:00pm to 3:30am (overtime on Friday's is required when there is a high demand of product) Summary of Job Responsibilities: Production Operators will work for a large propane distributer in Henderson, Colorado. Workers will inspect the bottles of propane for dents and damage. Duties will include refurbishing the propane bottles, paint, check valves for leaks, refill and palletize product. Operators will also hang the 50lb bottles on a conveyer. Please call Melinda Montoya ************. Qualifications Ideal Candidates: • Will work safely and be responsible for the safety of others • Flexible with job duties and interested in advancing to other positions • Show initiative and learn quickly • Must be willing to work as a team • Must pay attention to all details & follow instructions from the Supervisors • Have a Quality Assurance mind set Additional Information Company Perks- As an Advantage Resourcing employee, you will also receive great benefits, including:  Optional health benefits, including medical, dental, vision, and group life insurance.  Competitive weekly pay  Performance incentives/Holiday pay  Free training and computer software tutorials. All your information will be kept confidential according to EEO guidelines.

At Areté, we are on the forefront of developing innovative solutions, with great minds from all backgrounds, to help solve the nation's most complex security challenges. We strive for an inclusive, collaborative team environment that approaches differences as opportunities for innovation and excellence. As an employee-owned company, we foster an atmosphere that propels diverse career opportunities and professional growth. Discover your future with us. As an Electronics Technician for production at Arete, you will be responsible for assembling the electronics and necessary subassemblies for AIRTRAC lasers. These assemblies require soldering, following procedures, and reading schematics and drawings. You will also be responsible for the construction, integration, and test of custom cabling harnesses. You will be working with a team of scientists, engineers, and technicians to assemble, test, and calibrate electronics for lasers. You will also contribute to building, testing, troubleshooting, repairing, and modifying developmental and production electronic systems independently, or under the direction of an electrical or optical engineer. This position is based in our Niwot, CO office. This is a non-exempt, non-supervisory, full-time position. If you're looking for a rewarding career in a fast-paced and innovative environment, Arete could be the perfect fit for you. We have an impressive range of benefits, programs, and perks that we offer: Health & Wellness: * Medical, Dental & Vision Insurance * Life and Long-Term Disability (LTD) * Vision Reimbursement * Fitness Reimbursement Financial: * 401(k) Retirement Plan Contributions * Employee Stock Ownership Plan (ESOP) * Continuing Education Assistance Work-Life Balance: * Flexible Scheduling * Paid Time Off (PTO) * Paid Parental and Bereavement Leave What We Value: * Creativity and innovation in solving challenges * Integrity and responsibility in all actions * Collaboration across teams and specialties * Responsiveness in fast-paced environments * Passion for national security and excellence Experiences and Background We Look For (required skills): * Familiarity with electronic test equipment such as oscilloscopes, current clamps, AC/DC power supplies, and multimeters * Ability to produce professional documentation and thoroughly document setups and testing results. * AA/AS in a Technical or Engineering field or similar relevant discipline. Minimum 2 year of experience preferred, and significant relevant experience may substitute for educational requirement. * Good communication skills * Ability to learn new skills quickly in a fast-paced work environment * Highly organized and detail oriented * Good consistent work ethic Nice to Have (preferred skills): * Good computer skills * Soldering experience, especially J-STD-001 certification * Strong fine motor skills; ability to work on small assemblies under a microscope The salary range for this role is $60,000 to $65,000; however, Arete considers several factors when extending an offer of employment, including but not limited to: the position and associated responsibilities, a candidate's work experience, education/training, and key skills. Other Considerations Areté is committed to the principles of equal employment opportunity and nondiscrimination, and we believe every person has the right to be treated with fairness, dignity, and equal consideration. Areté is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, marital status, national origin, age, veteran status, disability, or any other characteristic protected by applicable federal, state, or local law. U.S. citizenship is required to meet position eligibility. Successful passage of a criminal background screen is required to meet position eligibility. Selected applicants will be subject to a government security investigation and must meet eligibility requirements for access to classified information. Areté will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring. Successful passage of a Department of Transportation (DOT) drug test is required to meet position eligibility. If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our website because of your disability. To request an accommodation, please contact Areté Human Resources at ************ for assistance.