Production associate jobs in Manchester, NH - 529 jobs

Job Title: Production Test Technician II Duration: 06 Months (Possible Extension or Conversion) Pay rate; $24/hr Qualifications: High School Degree or Equivalent 1 - 2 years of related experience Experience working in a lean manufacturing environment a plus Essential Knowledge, Skills And Abilities Have good manual dexterity Computer skills and literacy a plus Strong attention to detail Ability to manage multiple priorities and multiple tasks simultaneously Strong verbal communication skills Enjoy contributing to a diverse manufacturing group Able to embrace change Be a Team Player Must be a highly organized, self-managed individual who works with minimum supervision and the ability to work in a fast-paced environment Able to lift 20 pounds Stand/Sit/Walk 8 hrs a day Responsibilities: Perform a wide variety of mechanical or measurement assembly operations on product components, assemblies or sub-assemblies. Determines and/or follows methods and sequence of operations in performing wiring, component installation, hand soldering, cable assembling, bonding and fitting on assembly units. Make setups and adjustments holding tolerances to blueprint specifications. Essential Duties And Responsibilities Acquires job skills and learns all applicable company policies and procedures. Complete assigned tasks while following manufacturing, schedules, policy and procedures. Normally receives little instruction on daily work. Requires instructions on newly introduced assignments. Act as a champion of the company's Lean and Continuous Improvement programs. Time and attendance are in accordance with company policies, procedures and work area schedule. Complete work orders on schedule to ensure a constant flow of finished product to support customer service levels. Advise management of adverse manufacturing and/or equipment conditions and issues that are affecting production and /or safety. Complete a variety of manufacturing tasks as trained and directed by your supervisor including but not limited to bonding, potting, hand soldering, mechanical assembly. Operate equipment to manufacture parts and materials used in the production of ultrasound transducers. Notify manager of all NCM (non-conforming material). Identify and report all adverse conditions of the facility to management. Evaluation of performance will be based on ability to: Produce quality products in accordance to standards. Meet established standard times for standard operations greater than 80% of the time. Follow all applicable manufacturing procedures and documentation. Follow work order activities established via manufacturing reports. Accurately record labor time to all work order operations into the MRP system. Clean and maintain equipment (including tools and fixtures). Participate in the company's Lean and Continuous Improvement programs. Time and attendance (including the accurate reporting of time and attendance) Maintain work area 5s standards. Work with Team members with mutual respect and understanding. Demonstrate proficiency in at least one stage of manufacturing (bonding, wiring, potting, etc.

The Manufacturing Support Associate provides hands-on support to GMP manufacturing operations within a CDMO environment. This role is responsible for owning and investigating deviations, performing detailed manufacturing batch record (MBR) reviews, and ensuring documentation accuracy and compliance. The associate partners closely with manufacturing, quality, and technical teams to maintain high-quality standards and support continuous improvement initiatives. Responsibilities Lead and execute deviation investigations, including root cause analysis and deviation report writing. Perform comprehensive MBR reviews to ensure accuracy, completeness, and compliance with GMP requirements. Support documentation activities such as logbook reviews, corrections, and updates to manufacturing records. Collaborate with manufacturing teams to gather data, understand workflow issues, and drive timely deviation closure. Assist in implementing corrective and preventive actions (CAPAs) and support process improvements. Ensure adherence to GMP guidelines and maintain audit-ready documentation practices. Participate in cross-functional meetings to support production activities and resolve documentation-related issues. Qualifications 3-5 years of experience in a GMP manufacturing environment (biotech, pharma, or CDMO preferred). Strong, hands-on experience owning and writing deviations, including root cause and impact assessments. Experience reviewing manufacturing batch records and supporting related documentation. Working knowledge of GMP regulations and manufacturing operations.

At indi GO Technologies (Tradename: “GO”), we are changing the electric vehicle paradigm with our own class of ultra-efficient electric vehicles for ride hailing and last-mile delivery use cases. The indi GO line of purpose-built EVs provides the smoothest, roomiest, and most affordable ride using patented SmartWheel technology. Our technology combines premium suspension, a spacious cabin, and low cost-per-mile performance to enable truly sustainable transportation. We are seeking an experienced Manufacturing Operations specialist to help establish and scale-up our manufacturing capabilities. This role will help manage manufacturing facility infrastructure, implement production processes, perform manufacturing project management, and participate in the implementation of manufacturing practices to deliver world-class efficiency, quality, and cost control. Responsibilities: Manufacturing facility setup, layout optimization, and equipment commissioning. Function as part of a high-performing production team. Implement manufacturing best practices and continuous improvement initiatives. Collaborate with product and engineering to integrate manufacturing considerations early in product design. Develop and manage schedules to meet volume ramp-up targets. Track key manufacturing KPIs for efficiency, quality, and cost. Help ensure health, safety, and environmental compliance across operations. Requirements: Bachelor's degree in manufacturing, mechanical, or industrial engineering; Master's preferred. 5+ years in manufacturing operations Experience scaling manufacturing from prototype to volume production. Knowledge of lean manufacturing, Six Sigma, or similar process optimization methodologies. Experience in automotive or complex electromechanical assembly highly preferred. Strong leadership, problem-solving, and organizational skills. Qualified candidates working from our EV facility and HQ in Woburn, MA (20 minutes from downtown Boston) are preferred and will be prioritized. Note that only experienced and qualified candidates should apply, and also state whether they can either work full time in Woburn MA or are open to relocation to the NorthEast area. We are looking for like-minded individuals on our movement to truly impact sustainability. Join us on our mission to change the EV paradigm! indi GO Technologies offers competitive salaries, stock options, flexible hours, and a 401K plan. We support a diverse team, knowing that innovation truly thrives with a variety of backgrounds and experiences. Job Title and Compensation The salary range for this position is between $117,000 and $132,000, based on full-time employment. Actual salaries are based on several factors unique to each candidate, including but not limited to skill set, experience, certifications, and work location. Our open positions are based on job competencies that are specific to each role. If you are offered a position, the job title may be different from what is advertised to align with the role's competencies and your specific background, experience, and interview results. indi GO Technologies is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law.

When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation's premier propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customers. Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points across the United States. Applications for this position will be accepted until 02/27/2026. Posting Job Summary (Purpose): The Utility Worker primarily works in the outside production area of the AmeriGas Cylinder Exchange facility. The employee is responsible for the processing of cylinders (20 lb. barbeque grill cylinders). Key Characteristics: * Models a commitment to safety through his/her own day-to-day behavior; follows company safety procedures and policies * Demonstrates high professional and personal standards; has a commitment to quality, timeliness, and continuous improvement * Ability to function effectively as a member of a production team Duties and Responsibilities: * Sort, inspect, clean, paint, label, and refill empty cylinders. * Maintain a safety focus at all times and wear the proper PPE * Ensure the consistent quality of cylinders are being processed * Load filled cylinders onto the truck(s) for the next day's shipments. * Ability to stand and walk 8 - 12 hours per day. * Ability to lift 50 pounds repeatedly throughout the day. * Perform general housekeeping duties. Knowledge, Skills and Abilities: * Ability to follow processes, procedures, and instructions * Ability to function effectively as a member of a production team * Willingness to grow and learn * Basic mechanical aptitude * Basic computer knowledge * Work in a fast-paced environment * Be able to stand 8-10 hours per day * Ability to obtain required state licensing * Ability to be forklift certified Education and Experience Required: * 1 - 2 years work experience in manufacturing is preferred * High School Diploma or GED Working conditions: * Environmental conditions such as wind, rain, ice, and snow may affect this job, as the production area where the employee spends most of the workday is not enclosed. AmeriGas Propane, Inc. is an Equal Opportunity Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices. AmeriGas is a Drug Free Workplace. Candidates must be willing to submit to a pre-employment drug screen and a criminal background check. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with AmeriGas policies. As a federal contractor that engages in safety-sensitive work, AmeriGas cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis. The pay for this position ranges from $18.50 to $19.50 per hour, depending on circumstances including an applicant's skills and qualifications, certain degrees and certifications, prior job experience, market data, and other relevant factors. Additional compensation may include eligibility to earn a performance-based bonus or commissions on completed sales depending on position. This is the Company's good faith and reasonable estimate of the range of compensation for this position as of the time of posting. The Company offers a wide array of comprehensive benefit programs and services including medical, dental, vision, flexible spending and health savings accounts to our benefits-eligible employees. Additional benefits include retirement savings plans like 401(k) and paid days off such as parental leave, military leave, vacation/paid time off, sick leave in compliance with state law, as applicable, paid holidays, and disability coverage. Some benefits offerings are subject to any legal requirements or limitations, employee eligibility status, and where the employee lives and/or works.

We're hiring a Production Operator to work in a clean, supportive manufacturing environment. In this role, you'll be hands-on with the assembly, testing, and repair of life-saving products such as pacemakers, ICDs, and related devices. You'll be trained on precise processes and work closely with a supervisor to ensure every product meets strict quality standards. What You'll Do Assemble, test, and inspect medical device components with a high level of attention to detail. Follow written procedures and verbal instructions to ensure accuracy and compliance. Keep production records accurate and up to date to maintain full product traceability. Work with your supervisor to meet quality, safety, and performance goals. Participate in continuous improvement initiatives to make processes safer and more efficient. Communicate clearly with teammates and leadership about issues, solutions, and ideas for improvement. What We're Looking For High school diploma or equivalent required. Strong attention to detail and the ability to follow written procedures closely. Comfort working with small parts and components. Basic computer skills;able to learn and use data collection systems. Positive attitude and willingness to be part of a team. Some experience in manufacturing or assembly is helpful, but not required-you'll receive thorough training.

Shift: B Shift: Sunday, Monday,Tuesday alt. Wednesday 5:40pm-6:00am Please Note: We do haverequired overtime. Interview: Onsite interview This person is a member of acrew that operates two production lines.You will work with your shift tosafely produce high quality product in a fast pace continuous operationenvironment. The expectation for a winder operator is to deliver qualitypackaging and products for our customers. JOB DUTIES ANDRESPONSIBILITIES Plant and Environmental Safety Lives the Safety Standard and meets all safetyrequirements. Safety is a condition of employment. Take personal ownership towork safely and hold other team members to the same high standards of safety Safer together. Notify supervisor immediatelyof any accident, near miss or on- the -job injury when it occurs no matter howinsignificant it may seem. Participates in the safety,quality, autonomous maintenance (AM), TPM and housekeeping programs asestablished within the plant; including but not limited to Focused ImprovementEvents, Safety Committee, Training, etc. Performs job tasks to reduceenvironmental impact and adheres to the environmental regulations and recyclingprocedures for waste disposal. Complies with all plant rulesand safety regulations. Performs cleanup duties atworkstations and/or equipment/machinery. Communicates safety concernsand/or equipment problems/abnormalities to appropriate personnel, maintainingstrong communication with the appropriate line section operators to ensureimmediate action is taken for product out of spec. Inspect vehicles and other PIVequipment before use and throughout shift, keeping all equipment clean andoperational. TPM Participates in plant TPMinitiatives - completing activities associated with TPM tasks (adheres to CILTstandard, 5S). Must be an active member of an AM and or Pillar team. Continues to use TPMmethodology to gain a better understanding of the equipment. Identifies and participatesproactively in learning opportunities and develops expertise in those areas. Utilizes Focus Improvement (FI)tools to problem solve. Works to achieve zeroinjuries, zero defects and zero losses. During PM days, uses timeeffectively to bring equipment to optimal condition for zero losses. Maintain DMS and AM Team AreaActivity Boards. Quality Perform winder, EDL, andconveyor quality checks and documentation at specified intervals. Maintain control panel adjust speed, delays, and other timers if needed. Interface with plant employeesto provide quality control (QC) information. Monitor and report unusual orsuspect material issues not within specifications. Communicate with all coaterend operators concerning shift production Communicate with all back-endoperators concerning quality problems Understand and react to upsetconditions. Evaluate all finished productfor proper weight and/or thickness. Productivity Have a basic understanding ofproduct process. Operate Winders and packagingmachines on both lines. Operate banding equipment. Print and apply pallet labels Load and stack reworkedmaterial. Manage and accurately reportthe amount of scrap and seconds for tracking. Relieve crew members fromduties for breaks Manage trash. Listen for alarms and respondsappropriately to the various alarm signals. Assist in repair of webbreaks. Assist in all threading,product change procedures. Perform PM to AM tasktransfers on down days. Other Demonstrate the ability toeffectively communicate. Support the training anddevelopment of colleagues. Demonstrates flexibility to changingpriorities as business needs dictate. Identifies and participatesproactively in learning opportunities and develops expertise in those areas. Follows standard operatingprocedures and processes. Can and is willing to makedecisions. Knows the chain of command to get support. Regular attendance on site andthe ability to rotate varying shifts. All other duties as assignedor needed. JOB REQUIREMENTS SKILLS AND ABILITIES The employee should hold thefollowing skills and abilities: Demonstrated desire to impactsafety Must be able to workindependently or in a team atmosphere with minimal direct supervision Demonstrated mechanicalaptitude and the ability to troubleshoot High attention to detail Demonstrated ability tomulti-task Basic mathematics skills Able to effectivelycommunicate (read, write, speak, understand) English COMPUTER AND SOFTWARECOMPENTENCIES The employee must be able to: Work with a computer toperform basic data entry Demonstrate basic computerskills such as Microsoft Excel, Outlook, Pallet labeling system (MII), Ignitionand SAP. EDUCATION AND/OR EXPERIENCE High School Diploma or GEDEquivalent. Manufacturing or processrelated experience preferred. ESSENTIAL PHYSICALREQUIREMENTS/WORK ENVIRONMENT Must: Be at least 18 years old. Remain drug free. Have work schedule flexibility(possible rotating shifts; mandatory overtime). Effectively and efficientlyperform up to 12-hour shifts (with breaks) in an industrial manufacturingenvironment: While wearing applicable /mandatory PPE. With exposure to: Extreme temperaturevariation. Sounds or noise levels thatmay be uncomfortable (hearing protection is provided). Prolonged sitting, standing,walking, and/or using full upper / lower body movement for process. Ink / dust / dirt / fumes. With the ability to: Distinguish colors andshading. Handle, control, feed, or feelobjects, tools, or product. Climb / descend stairs /ladder, and / or work from heights as needed. Become certified to operate aforklift (if/as needed). Repetitively and freely: Perform movements of body,hand, arm, leg. Bend, twist, squat, walk, sit,stand; to include waist, back and knee motion. Lift, push and pull40lbs. This job description in no waystates or implies that these are the only duties to be performed by theemployee(s) incumbent in this position.Employee(s) will be required to follow any other job-relatedinstructions and to perform any other job-related duties requested by anyperson authorized to give instructions or assignments. A review of this position hasexcluded the marginal functions of the position that are incidental to theperformance of fundamental job duties.All duties and responsibilities are essential job functions andrequirements and are subject to possible modification to reasonably accommodateindividuals with disabilities. Toperform this job successfully, the incumbents(s) will possess the skills,aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals whopose a direct threat or significant risk to the health or safety of themselvesor others. The requirements listed inthis document are the minimum levels of knowledge, skills, and abilities. This document does not createan employment contract, implied or otherwise, other than an at willrelationship.

Title: Entry Level Production Worker (Sandblast) Type of Placement: Temp to hire Shift: Mon-Friday 7:30AM - 4PM Pay/Pay Range: $18-20/hr About Our Customer: Well established manufacturer in Londonderry, NH. Our client takes pride in providing a work atmosphere that is a relatively low key and temperature-controlled environment. They are an AS9100D & ISO 9001 certified company. Benefits upon Hired Perm: Medical (Company pays 70%) Dental 401K Two weeks off each July Summary: We are currently seeking a dedicated and skilled individual to join our team as an entry level Production Worker. In this role, you will be responsible for the critical process of surface cleaning cast aluminum parts for inspection. It involves using compressed air to propel abrasive material at a surface under high pressure (60 psi) in an enclosed cabinet. ESSENTIAL FUNCTIONS: Utilize high-pressure compressed air to clean cast parts to prepare for inspection. Follow established procedures and guidelines to ensure safe and efficient operation of tools and equipment. Inspect parts for defects or irregularities. Work independently to prioritize tasks and manage workload to meet production deadlines. Maintain a clean and organized work area to ensure safety and efficiency. Communicate any issues or concerns regarding equipment or materials to the supervisor. Adhere to all safety protocols and guidelines to minimize the risk of accidents or injuries. Participate in training programs to enhance skills and knowledge related to sandblast techniques. EDUCATION and/or EXPERIENCE: High school diploma or equivalent. Previous experience in a manufacturing or industrial environment, preferably in a role involving metal casting or fabrication, but not required. Strong attention to detail and ability to identify defects or irregularities in parts. Physical strength and endurance to lift and handle parts weighing up to 50 pounds routinely. Good communication skills and the ability to work independently. Willingness to work in a fast-paced environment and adapt to changing priorities. Ability to follow both written and verbal directions. Manual dexterity and good eye coordination is necessary. About Wicked Staffing Solutions: We have built long-standing relationships with some of the most reputable and well-known top companies that are hiring in manufacturing, distribution, customer service, engineering, electronics and many other industries. We offer temporary, temp-hire and direct placement opportunities, in a variety of positions. Equal Opportunity Employer

Job DescriptionDescription: Streamline Glass, a privately-owned, brand new glass manufacturing company in Newton, NH, is seeking a Production Operator to help drive our largely automated, state-of-the-art glass manufacturing facility. In this role, you'll oversee advanced machinery, ensure seamless production flows, and maintain the highest standards of quality and safety. Working alongside management and technical teams, you'll support new equipment integration, troubleshoot issues, and keep our automated systems running at peak efficiency. Please note that work for this position will begin in late February. Responsibilities: Operating and monitoring automated machinery Maintaining streamlined production workflows and enforcing quality standards Assisting in setup and optimization of new equipment and processes Troubleshooting and performing minor maintenance to keep systems running smoothly Applying Diamon-Fusion coating to glass products If you enjoy working in a team environment, are detail-oriented and safety-focused, this may be the job for you! Why Join Streamline Glass? Generous PTO, health insurance, dental, vision, 401k Next-generation automated manufacturing systems redefining industry standards Cutting-edge equipment in a modern, innovation-driven facility Mentorship from industry veterans and collaboration with ambitious newcomers Ground-floor opportunity to grow with a pioneering company Requirements: Proficient technical skills; comfortability with technology and automated systems Ability to safely lift 75lbs Ability to perform physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking, stooping, and handling of materials Experience with safety protocols, collaborating effectively, and communicating clearly within dynamic, team-oriented environments Prior experience in the glass industry is a plus but not required Streamline Glass complies with all applicable federal, state, and local employment laws. We are an Equal Opportunity Employer and do not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other status protected by law. All employment decisions are made in accordance with these legal requirements, and we encourage individuals from all legally protected groups to apply.

**Roles and Responsibilities:** JOB TASKS MAY INCLUDE + Setting-up and operating inspection and/or manufacturing tools/equipment such as conventional electrical discharge machines, grinders, precision assembly devices, peen machines, TIG-tack welder, heat treat, plasma spray, etc. + Performing basic mathematical calculations + Using precision gages/fixtures and inspection measuring equipment and interpreting mechanical blueprints, sketches, engineering specifications and drawings, etc., to determine set-ups and operations necessary to complete job tasks. + Training duties. + Performing related environmental, health, safety, maintenance, quality, continuous improvement, and production-flow job duties to support plant machinery, equipment, and manufacturing-related initiatives and programs. + Maintaining detailed job task documentation, reports, and records. MINIMUM QUALIFICATIONS: + High school diploma/GED with a minimum of 1-year of experience in a technically-related field i.e., manufacturing, fabrication, or mechanical engineering; Or + Bachelor's degree, Associate's degree or Technical certificate from an accredited university or college in a technically-related field i.e., manufacturing, fabrication, or mechanical engineering. DESIRABLE QUALIFICATIONS + Set-up and operation of machine/manufacturing tools and equipment. + Reading and interpreting mechanical blueprints, drawings, engineering specifications, etc. + Performing basic mathematical calculations. + Use of manufacturing/machine tool measuring equipment and gages. + Lean Six Sigma fundamentals. + EH&S processes and procedures. + Oral and written communication skills. + Demonstrated ability in maintaining relationships by recognizing needs and sensitivities of others, and cooperating and resolving conflicts that inspire the Team in achieving objectives and deliverables. + Demonstrated ability in receiving guidance and supervision, following work rules, safety practices, work procedures; meeting deadlines; and punctuality and attendance standards. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Production Operator (Tilton, NH) Collaborate with Innovative 3Mers Around the World Choosing where to start and grow your career has a major impact on your professional and personal life, so it's equally important you know that the company that you choose to work at, and its leaders, will support and guide you. With a variety of people, global locations, technologies and products, 3M is a place where you can collaborate with other curious, creative 3Mers. This position provides an opportunity to transition from other private, public, government or military experience to a 3M career. The Impact You'll Make in this Role As a Production Operator, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative people around the world. Here, you will make an impact by: Not limited to heavy lifting and moving of materials. Loading and unloading vehicles, and other activities in a helping or assisting mode. May involve working at heights and heavy lifting of 30 pounds or more. May also require the operation of industrial trucks or tractors equipped to move materials around a warehouse, storage yard, factory, construction site, or similar location. Requires forklift certification. Your Skills and Expertise To set you up for success in this role from day one, 3M is looking for candidates who must have the following qualifications: Possess a High School Diploma/GED or higher (completed and verified prior to start) from an accredited institution. One (1) year of manufacturing experience in a private, public, government or military environment. Applicants meeting the basic qualifications above may be required to take and pass 3M elected testing as a part of the selection process. Additional qualifications that could help you succeed even further in this role include: Three (3) years of manufacturing experience in a private, public, government or military environment. Strong computer skills, including Microsoft Office Package, MES knowledge. Understanding of Lean Management Systems, and lean tools. Pay & Benefits: The starting rate of pay for this position is $25.79. This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate's relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences, and Retirement Benefits, etc.). Additional information is available at: ************************************************************** . For more information visit: ************************************************************** About 3M Do you see the world differently? Are you inspired by how a simple shift can result in big change? Do you share your ideas in the hopes of coming up with something even better by working together? Then join 3M! With 93,000 people around the world in more than 70 countries and $30 billion in sales, 3M is committed to building on our rich heritage by bringing our best to the innovations we create. Be part of improving how people live and work every day. Be part of what's next at 3M! Supporting Your Well-being 3M offers many programs to help you live your best life - both physically and financially. To ensure competitive pay and benefits, 3M regularly benchmarks with other companies that are comparable in size and scope. Resources for You For more details on what happens before, during, and after the interview process, check out the Insights for Candidates page at 3M.com/careers 3M is an equal-opportunity employer. 3M will not discriminate against any applicant for employment on the basis of race, color, national origin, religion, sex, sexual orientation, gender identity, age, disability, or veteran status. Must be legally authorized to work in the country of employment without sponsorship for employment visa status (e.g., H1B status) All US-based 3M full time employees will need to sign an employee agreement as a condition of employment with 3M. This agreement lays out key terms on using 3M Confidential Information and Trade Secrets. It also has provisions discussing conflicts of interest and how inventions are assigned. Employees that are Job Grade 7 or equivalent and above may also have obligations to not compete against 3M or solicit its employees or customers, both during their employment, and for a period after they leave 3M.Learn more about 3M's creative solutions to the world's problems at ********** or on Instagram, Facebook, and LinkedIn @3M.Responsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties.Safety is a core value at 3M. All employees are expected to contribute to a strong Environmental Health and Safety (EHS) culture by following safety policies, identifying hazards, and engaging in continuous improvement.Pay & Benefits Overview: **************************************************************3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law. Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly. 3M Global Terms of Use and Privacy Statement Carefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at 3M are conditioned on your acceptance and compliance with these terms. Please access the linked document by clicking here, select the country where you are applying for employment, and review. Before submitting your application, you will be asked to confirm your agreement with the terms.

Working at Freudenberg: We will wow your world! Responsibilities: Produce/package/label all products to meet or exceed all quality specifications per shop order, QCIC's and all other required documents provided. Operates various manufacturing and measurement equipment in a safe and orderly manner and notifies Lead/Supervisor when operating problems occur or standards cannot be met. Meet or exceed all due dates assigned to the manufacturing shop order. Responsible for all products manufactured. Understanding of documentation system including reading comprehension, writing and how to complete documents accurately. May assist engineering or manufacturing technicians with validation of processes, product and tooling. Understand and follow gowning processes and procedures while maintaining a clean and presentable work station. Physical Requirements: Involves sitting, standing and/or walking, with frequent ability to exert up to 15 pounds of force to move objects and occasionally exert up to 30 pounds of force to move objects. Qualifications: Must have high school diploma or equivalent Manufacturing experience preferred The Freudenberg Group is an equal opportunity employer that is committed to diversity and inclusion. Employment opportunities are available to all applicants and associates without regard to race, color, religion, creed, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity or expression, national origin, ancestry, age, mental or physical disability, genetic information, marital status, familial status, sexual orientation, protected military or veteran status, or any other characteristic protected by applicable law. Freudenberg Medical LLC

Our client, a busy and growing manufacturer in Alstead, NH is looking for a Production Worker to join their team! Basic math skills; counting, addition, subtraction Reading ability High level of accuracy and attention to detail Consistent attendance history Pallet jack experience a plus Ability to work effectively at a fast pace Ability to stand and lift up to 50 pounds frequently throughout the shift Benefits you will receive as the Production Worker: Temp to hire position Full time schedule Monday - Friday 6am-2:30pm Once hired on, Health/Life/Disability insurance Once hired on, 401k with company match Paid time off and holidays For the Production Worker your duties will include: Assisting Line Leaders in set up for production runs and changeovers Loading containers onto conveyor belts for filling Packaging and palletizing completed cases of product Production area and equipment cleaning as directed Reworking projects including labeling, case boxing, and repalletizing product Assisting in performing periodic inventory counts of products Reporting any quality or safety concerns to the Production Manager Are you excited for a great new opportunity in a fast paced manufacturing environment? Apply today! To apply for this position, please email your resume to *****************, call ************ or apply online at *************** We are here to help! For your convenience, Masiello Employment Services offers phone & video interviews/meetings. We can't wait to virtually meet you!

Job Description Job Title: Production Worker - Level I Pay Rate: $19.00/hour Shift: 1st Shift | [Insert hours, e.g., 6:00 AM - 2:30 PM] Schedule: Monday - Friday We are seeking a dependable and hardworking Production Worker Level I to assist with daily processing of customer orders. This entry-level role involves basic production, packaging, and warehouse tasks. Training is provided. Key Responsibilities: Prepare the production and loading areas for daily operations Use an electric pallet jack to move, stack, load, and unload products Make boxes and handle packaging materials Weigh, count, or scale products for customer orders Pack and label items according to order requirements Handle and distribute ice for storing temperature-sensitive products Clean processing areas and dispose of waste properly Monitor inventory supplies and ice machine as needed Follow safety protocols and procedures Perform other duties as assigned Qualifications: Basic understanding of warehouse or production tasks Ability to lift up to 100 lbs occasionally and 50 lbs frequently Able to work in cold environments (super freezer at -70°ree;F) Comfortable standing, bending, and lifting throughout the shift Able to operate electric pallet jacks and basic equipment (training provided) Reliable and punctual with a strong work ethic Work Environment: Cold storage and production areas May work in slippery or wet conditions Physically demanding role with heavy lifting and repetitive tasks Team-based environment with a focus on quality and efficiency Powered by JazzHR zm7647TPCd

Job Title: Production Worker - Level I Pay Rate: $19.00/hour Shift: 1st Shift | [Insert hours, e.g., 6:00 AM - 2:30 PM] Schedule: Monday - Friday We are seeking a dependable and hardworking Production Worker Level I to assist with daily processing of customer orders. This entry-level role involves basic production, packaging, and warehouse tasks. Training is provided. Key Responsibilities: Prepare the production and loading areas for daily operations Use an electric pallet jack to move, stack, load, and unload products Make boxes and handle packaging materials Weigh, count, or scale products for customer orders Pack and label items according to order requirements Handle and distribute ice for storing temperature-sensitive products Clean processing areas and dispose of waste properly Monitor inventory supplies and ice machine as needed Follow safety protocols and procedures Perform other duties as assigned Qualifications: Basic understanding of warehouse or production tasks Ability to lift up to 100 lbs occasionally and 50 lbs frequently Able to work in cold environments (super freezer at -70°F) Comfortable standing, bending, and lifting throughout the shift Able to operate electric pallet jacks and basic equipment (training provided) Reliable and punctual with a strong work ethic Work Environment: Cold storage and production areas May work in slippery or wet conditions Physically demanding role with heavy lifting and repetitive tasks Team-based environment with a focus on quality and efficiency

The Production Worker is responsible for performing all tasks involved in the production of the company's products. The individual in this position follows standard work methods and practices safe work habits to ensure production is as efficient and safe as possible. ESSENTIAL FUNCTIONS To perform this job successfully, an individual must be able to perform each essential function. Perform work on production line; run equipment and inspect, stack, separate, count, and pack product. Conduct quality checks and properly record information. Monitor machinery and equipment operation to ensure all product meets performance specifications and requirements. Promptly notify supervisor of any quality or production issue. Assist with changeovers. Maintain good housekeeping and regularly clean work area, machines, and equipment. Identify and contribute to continuous improvement efforts to reduce costs or increase productivity without reducing effectiveness. Maintain an open and candid working relationship with immediate supervisor/manager in discussing matters of importance. Adhere to established company values, practices, policies and procedures at all times. Follow and support compliance with all applicable safety rules, laws, regulations, and standards. Demonstrate regular and punctual attendance at the assigned work location. This job description reflects management's assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned MARGINAL FUNCTIONS The individual may be asked to perform other duties as requested. REQUIRED KNOWLEDGE, SKILLS, AND ABILITIES An individual qualified for this job must be able to: Keep up with machine production rates. Accurately multiply, divide, add, and subtract whole numbers to resolve practical problems. Operate a computer PC proficiency; use spreadsheets and reporting software effectively. Wear/use required PPE (personal protective equipment). Understand written instruction and complete appropriate documentation as directed. Use a logical approach to troubleshooting issues and prioritizing production needs. Recognize problems when they occur and to work toward the solution of those problems. Pay attention to details and pursue quality in accomplishing work duties and tasks. Look for opportunities to reduce costs or increase productivity without reducing effectiveness. Handle challenges skillfully, thoroughly, and effectively. Effectively and professionally communicate with co-workers, team members, and internal or external customers. Present information clearly and accurately. Independently take advantage of opportunities to improve or increase skills, abilities and job knowledge. Make sure that work is delivered on time and of high quality. Develop good work practices in order to get the job done. Use equipment, resources and time in an efficient and effective manner. Use good judgment when making decisions. Perform work in a safe manner at all times. Work in a cooperative manner with management, co-workers, internal/external customers, and vendors. Do the right thing, even when it is difficult. MINIMUM EXPERIENCE, EDUCATION, AND CERTIFICATIONS Entry level position (0 to 2 years experience). Must be able to obtain forklift license through Highline Warren. PHYSICAL DEMANDS OF ESSENTIAL FUNCTIONS The physical demands described here are representative of those that must be met by an individual to successfully perform the Essential Functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Remain in a stationary position when performing line operations. Regularly move about when moving along the line as needed to perform job duties. Transport products and materials weighing up to 58 pounds when moving products to the line and or emptying boxes to the load area. Manipulate products on pallets, using force of up to 35 pounds. Position oneself to retrieve products or materials from ground level. Reach forward and overhead when inspecting product and moving pallets. Ascend/descend stairs/ladders to access the machine, catwalk, and when climbing over machinery/line. Position and handle product, boxes, and pallets. Perceive the nature of sounds and have the ability to exchange detailed information while performing job duties in a manufacturing plant where noise level is moderate to high. Move about the manufacturing facility to observe and effectively communicate with team members and perform job duties. ENVIRONMENTAL CONDITIONS The environmental conditions described here are representative of those the associate encounters while performing the Essential Functions of the job. The individual in this position will be expected to work in a manufacturing plant environment, which may include being exposed to work in high/precarious places, moving machinery, marked changes in temperature and humidity, and dust, odors and fumes. Typical noise level is loud.

Presser should have the ability to work in a fast-paced environment and have attention to detail. This position will work on the production floor and be trained to operate the robotics and computer system. Company is willing to train a hard working, reliable and honest individual. We offer great benefits, growth potential & training. Benefits include Health Insurance, paid vacation, sick and holidays, 401(k) with matching 3%, employee discount. Starting pay is $16+ based on performance and experience.

Shift: B Shift: Sunday, Monday, Tuesday alt. Wednesday 5:40pm-6:00am Please Note: We do have required overtime. Interview: Onsite interview This person is a member of a crew that operates two production lines.You will work with your shift to safely produce high quality product in a fast pace continuous operation environment. The expectation for a winder operator is to deliver quality packaging and products for our customers. JOB DUTIES AND RESPONSIBILITIES PRINCIPAL DUTIES AND RESPONSIBILITIES: Plant and Environmental Safety Lives the Safety Standard and meets all safety requirements. Safety is a condition of employment. Take personal ownership to work safely and hold other team members to the same high standards of safety Safer together. Notify supervisor immediately of any accident, near miss or on- the -job injury when it occurs no matter how insignificant it may seem. Participates in the safety, quality, autonomous maintenance (AM), TPM and housekeeping programs as established within the plant; including but not limited to Focused Improvement Events, Safety Committee, Training, etc. Performs job tasks to reduce environmental impact and adheres to the environmental regulations and recycling procedures for waste disposal. Complies with all plant rules and safety regulations. Performs cleanup duties at workstations and/or equipment/machinery. Communicates safety concerns and/or equipment problems/abnormalities to appropriate personnel, maintaining strong communication with the appropriate line section operators to ensure immediate action is taken for product out of spec. Inspect vehicles and other PIV equipment before use and throughout shift, keeping all equipment clean and operational. TPM Participates in plant TPM initiatives - completing activities associated with TPM tasks (adheres to CILT standard, 5S). Must be an active member of an AM and or Pillar team. Continues to use TPM methodology to gain a better understanding of the equipment. Identifies and participates proactively in learning opportunities and develops expertise in those areas. Utilizes Focus Improvement (FI) tools to problem solve. Works to achieve zero injuries, zero defects and zero losses. During PM days, uses time effectively to bring equipment to optimal condition for zero losses. Maintain DMS and AM Team Area Activity Boards. Quality Perform winder, EDL, and conveyor quality checks and documentation at specified intervals. Maintain control panel adjust speed, delays, and other timers if needed. Interface with plant employees to provide quality control (QC) information. Monitor and report unusual or suspect material issues not within specifications. Communicate with all coater end operators concerning shift production Communicate with all back-end operators concerning quality problems Understand and react to upset conditions. Evaluate all finished product for proper weight and/or thickness. Productivity Have a basic understanding of product process. Operate Winders and packaging machines on both lines. Operate banding equipment. Print and apply pallet labels Load and stack reworked material. Manage and accurately report the amount of scrap and seconds for tracking. Relieve crew members from duties for breaks Manage trash. Listen for alarms and responds appropriately to the various alarm signals. Assist in repair of web breaks. Assist in all threading, product change procedures. Perform PM to AM task transfers on down days. Other Demonstrate the ability to effectively communicate. Support the training and development of colleagues. Demonstrates flexibility to changing priorities as business needs dictate. Identifies and participates proactively in learning opportunities and develops expertise in those areas. Follows standard operating procedures and processes. Can and is willing to make decisions. Knows the chain of command to get support. Regular attendance on site and the ability to rotate varying shifts. All other duties as assigned or needed. JOB REQUIREMENTS SKILLS AND ABILITIES The employee should hold the following skills and abilities: Demonstrated desire to impact safety Must be able to work independently or in a team atmosphere with minimal direct supervision Demonstrated mechanical aptitude and the ability to troubleshoot High attention to detail Demonstrated ability to multi-task Basic mathematics skills Able to effectively communicate (read, write, speak, understand) English COMPUTER AND SOFTWARE COMPENTENCIES The employee must be able to: Work with a computer to perform basic data entry Demonstrate basic computer skills such as Microsoft Excel, Outlook, Pallet labeling system (MII), Ignition and SAP. EDUCATION AND/OR EXPERIENCE High School Diploma or GED Equivalent. Manufacturing or process related experience preferred. ESSENTIAL PHYSICAL REQUIREMENTS/WORK ENVIRONMENT Must: Be at least 18 years old. Remain drug free. Have work schedule flexibility (possible rotating shifts; mandatory overtime). Effectively and efficiently perform up to 12-hour shifts (with breaks) in an industrial manufacturing environment: While wearing applicable / mandatory PPE. With exposure to: Extreme temperature variation. Sounds or noise levels that may be uncomfortable (hearing protection is provided). Prolonged sitting, standing, walking, and/or using full upper / lower body movement for process. Ink / dust / dirt / fumes. With the ability to: Distinguish colors and shading. Handle, control, feed, or feel objects, tools, or product. Climb / descend stairs / ladder, and / or work from heights as needed. Become certified to operate a forklift (if/as needed). Repetitively and freely: Perform movements of body, hand, arm, leg. Bend, twist, squat, walk, sit, stand; to include waist, back and knee motion. Lift, push and pull 40lbs. This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, and abilities. This document does not create an employment contract, implied or otherwise, other than an at will relationship.

SummaryJob Description Roles and Responsibilities: JOB TASKS MAY INCLUDE Setting-up and operating inspection and/or manufacturing tools/equipment such as conventional electrical discharge machines, grinders, precision assembly devices, peen machines, TIG-tack welder, heat treat, plasma spray, etc. Performing basic mathematical calculations Using precision gages/fixtures and inspection measuring equipment and interpreting mechanical blueprints, sketches, engineering specifications and drawings, etc., to determine set-ups and operations necessary to complete job tasks. Training duties. Performing related environmental, health, safety, maintenance, quality, continuous improvement, and production-flow job duties to support plant machinery, equipment, and manufacturing-related initiatives and programs. Maintaining detailed job task documentation, reports, and records. MINIMUM QUALIFICATIONS: High school diploma/GED with a minimum of 1-year of experience in a technically-related field i.e., manufacturing, fabrication, or mechanical engineering; Or Bachelor's degree, Associate's degree or Technical certificate from an accredited university or college in a technically-related field i.e., manufacturing, fabrication, or mechanical engineering. DESIRABLE QUALIFICATIONS Set-up and operation of machine/manufacturing tools and equipment. Reading and interpreting mechanical blueprints, drawings, engineering specifications, etc. Performing basic mathematical calculations. Use of manufacturing/machine tool measuring equipment and gages. Lean Six Sigma fundamentals. EH&S processes and procedures. Oral and written communication skills. Demonstrated ability in maintaining relationships by recognizing needs and sensitivities of others, and cooperating and resolving conflicts that inspire the Team in achieving objectives and deliverables. Demonstrated ability in receiving guidance and supervision, following work rules, safety practices, work procedures; meeting deadlines; and punctuality and attendance standards. This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No

Working at Freudenberg: We will wow your world! Responsibilities: Freudenberg-NOK Sealing Technologies is recruiting Production Technicians to join established teams that manufacture raw materials for our customers throughout North America. Freudenberg-NOK is a family-owned company with facilities in over 55 countries worldwide. Our Components group in Bristol produces high quality rubber, metal, and springing components. These parts are the raw materials used in the manufacturing of seals for automotive, hydraulics, and drivetrains. Come join the team that produces quality parts for our global automotive customers. $2,000 sign-on bonus for 3rd shift operators. $1,000 sign-on bonus for 2nd shift operators. Competitive starting pay and rate increase schedule. $1.00/hr shift differential for 3rd shift operators. $0.50/hr shift differential for 2nd shift operators. Schedule: Full Time, Monday - Friday, 11pm - 7am or 3pm - 11pm. Rotating Saturday shifts as scheduled. Ensures compliance with all safety procedures. Quality inspections of finish product. Maintains 5-S in the area. Ensures all work instructions are maintained. Qualifications: Strong aptitude to learn Careful attention to detail Ability to work effectively in a team environment Effective communication skills Prior manufacturing experience (preferred) The Freudenberg Group is an equal opportunity employer that is committed to diversity and inclusion. Employment opportunities are available to all applicants and associates without regard to race, color, religion, creed, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity or expression, national origin, ancestry, age, mental or physical disability, genetic information, marital status, familial status, sexual orientation, protected military or veteran status, or any other characteristic protected by applicable law. Freudenberg-NOK General Partnership