Production associate jobs in New Britain, CT

Warehouse Associate (Temporary) Shift: First Shift Pay Rate: $18-$20 per hour We are seeking a reliable and detail-oriented Temporary Warehouse Associate to support daily warehouse operations. This role involves operating powered equipment, handling product movement, and maintaining a safe, organized work environment. The ideal candidate is team-focused, safety-conscious, and comfortable working in a fast-paced setting. Responsibilities: Operate powered equipment to move, locate, stack, and count products safely and accurately Load products onto equipment, pallets, or totes while maintaining high standards of accuracy and efficiency Organize, store, and retrieve products for shipment or storage, verifying product type and quantities Replace equipment batteries or LP tanks and monitor power supply as needed to support operations Maintain cleanliness and organization of the warehouse, including routine inspections of equipment and work areas Assist with physical inventory processes, including cycle counts and audits, to ensure accurate inventory records Qualifications: Preferably 6 to 12 months of previous warehouse experience Preferably at least six months of forklift operating experience Strong attention to detail with a focus on accuracy and safety Ability to work effectively in a team-oriented environment Pay Details: $18.00 to $20.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Summary: The main function of the Production Line Utility Front End Associate is to ensure accuracy and quality of product to satisfaction of Ragozzino Standards. Essential Job Functions : Required duties include spreading of food toppings on product, wiping trays clean, placing trays on conveyors and similar tasks. Ensure that product looks neat and that all ingredients have been applied according to specifications. Responsible for notifying supervisor and QA tech of defective ingredients or materials which may hinder assembly. Ensure a clean, neat work area. Follow all General Manufacturing Practices (GMP practices) Other duties as assigned Job Safety Requirements: Safety is our top priority. Supervisors and leads are responsible to promote a safe and healthy work environment. Accountabilities include but are not limited to: Ensuring unsafe acts or conditions are reported promptly for corrective action. Empowered to stop a task if there are safety concerns so that corrective action can be taken. You are engaged with routinely auditing your team, processes, environment. You are engaged with the safety committee to continuously improve our plant safety performance. Job Requirements: High School diploma or equivalent Ability to perform multi-tasking. Ability to solve moderate problems and make recommendations for review by others. Ability to work as a member of a team responsible for successful completion of own and others job duties. Ability to communicate verbally in English for work related responsibilities. Ability to hear. Ability to walk and stand for long periods of time Ability to push, pull and lift up to 50 lbs. Ability to reach, feel, handle equipment Ability to perform repetitive motions using hands, wrists and feet

At Niagara, we're looking for Team Members who want to be part of achieving our mission to provide our customers the highest quality most affordable bottled water. Consider applying here, if you want to: Work in an entrepreneurial and dynamic environment with a chance to make an impact. Develop lasting relationships with great people. Have the opportunity to build a satisfying career. We offer competitive compensation and benefits packages for our Team Members. Production OperatorThis position is responsible for daily operations of the production floor; ensuring the shift meets established safety, quality, and production goals in compliance with all applicable legal and food safety requirements. Essential Functions Responsible for daily activities of the production line(s), ensuring product adheres to Niagara's standard of safety, quality, and throughput. Accurately completes applicable quality and production reports hourly. Physical and visual inspection of product is required to prevent non-conforming goods. Correctly reports all quality defects to the appropriate team members and shift leadership. Adheres to the highest standards of company and plant safety programs, guidelines, rules, and regulations. Abides by Niagara's Good Manufacturing Practices (GMP) and Food Safety Standards at all times. Maintains general housekeeping in all areas of production and additional areas assigned by plant leadership. Maintains appropriate level of raw materials as required, to ensure production lines incur minimal downtime. Demonstrates the aptitude and skill to work in all assigned areas of production; troubleshoots minor production line issues and performs relief duties when required. Regular and predictable attendance is an essential function of the job. Ability to work 12 hour shifts, day or night, on a rotating 2-2-3 schedule or schedule as dictated by production demand. Please note this job description is not designed to contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without prior notice. Qualifications Minimum Qualifications: 0 Years - Experience in Field or similar manufacturing environment 0 Years - Experience in Position 0 Years - Experience managing people/projects *experience may include a combination of work experience and education Preferred Qualifications: 2 Years - Experience in Field or similar manufacturing environment 2 Years - Experience in Position 2 Years - Experience managing people/projects *experience may include a combination of work experience and education Competencies This position embodies the values of Niagara's LIFE competency model, focusing on the following key drivers of success: Lead Like an Owner Makes safety the number one priority Keeps alert for safety issues and escalates immediately Effectively prioritizes tasks based on department goals Shows respect to others and confronts interpersonal issues directly Prioritizes resolution of customer issues effectively Responds promptly and honors commitments to internal and external customers InnovACT Makes recommendations to continuously improve policies, methods, procedures, and/or products Demonstrates adaptability by reacting appropriately to unexpected changes in situations or circumstances Increases performance through greater efficiency Find a Way Seeks to develop technical knowledge through learning from other experts Understands interdepartmental impact of individual decisions and actions Seeks solutions rather than placing blame Empowered to be Great Consistently looks for ways to improve one's self through growth and development opportunities Communicates clearly and promptly up, down, and across Communicates effectively to manage expectations Education Minimum Required: High School Diploma or GED Preferred: Associate's Degree Certification/License: Required: N/A Preferred: N/A Foreign Language Required: None Required Preferred: None Required Typical Compensation Range Pay Rate Type: Hourly$20.01 - $27.02 / Hourly Benefits Our Total Rewards package is thoughtfully designed to support both you and your family: Regular full-time team members are offered a comprehensive benefits package, while part-time, intern, and seasonal team members are offered a limited benefits package. Paid Time Off for holidays, sick time, and vacation time Paid parental and caregiver leaves Medical, including virtual care options Dental Vision 401(k) with company match Health Savings Account with company match Flexible Spending Accounts Expanded mental wellbeing benefits including free counseling sessions for all team members and household family members Family Building Benefits including enhanced fertility benefits for IVF and fertility preservation plus adoption, surrogacy, and Doula reimbursements Income protection including Life and AD&D, short and long-term disability, critical illness and an accident plan Special discount programs including pet plans, pre-paid legal services, identity theft, car rental, airport parking, etc. Tuition reimbursement, college savings plan and scholarship opportunities And more! *********************************************** * *Los Angeles County applicants only** Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, the California Fair Chance Act, and any other applicable local and state laws. Any employment agency, person or entity that submits a résumé into this career site or to a hiring manager does so with the understanding that the applicant's résumé will become the property of Niagara Bottling, LLC. Niagara Bottling, LLC will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Employment agencies that have fee agreements with Niagara Bottling, LLC and have been engaged on a search shall submit résumé to the designated Niagara Bottling, LLC recruiter or, upon authorization, submit résumé into this career site to be eligible for placement fees.

Modern machine shop needs a Production Worker with the following skills: Visual Inspection Painting and marking of aerospace parts Dimensional inspection using micrometers and calipers Forklift operation Media Finish and Fatigue Tumble Maintaining Scrap Metal Light Machine Maintenance General Shop and Building Maintenance Make deliveries and pick up parts, and verify appropriate paperwork. Qualifications: Must be able to: lift 30 lbs up to 4 feet, maintain stationary positions for long periods of time, able to walk or traverse, able to work with repetitive hand and arm motions, able to communicate, converse with, express self, exchange information, discern, and convey messages. Reliable/Adaptable High school or equivalent education It is the policy of this company to extend equal employment opportunities to all qualified employees without regard to race, color, religion, creed, marital status, learning disability, sexual orientation, national origin, sex, age, history of mental illness, mental retardation or physical, unless such disability prevents performance of the work involved. This policy applies to all phases of employment including, but not limited to, recruitment, hiring, placement, upgrading and promotion, transfer, layoff and recall, termination, selection for company sponsored training programs, rates of pay and other forms of compensation, use of facilities, and participation in all company sponsored activities.

Who is Habasit? Habasit is the global leader in the manufacturing of lightweight conveyor belting. Our slogan “Solutions in Motion” defines us; we are a provider of world class power-transmission and conveying solutions. At Habasit, we understand that a global leader is only as good as the people who represent it, and we are always searching for the right people to keep us in motion. We are looking for ambitious individuals, leaders, and students who are ready to help move us forward. If you have a can-do attitude and want to join a world-class organization, read on and apply today! What will you be doing? Standard Fabrication - Utilize machinery to customize fabric belts (measuring, cutting, pressing) to customer specifications. Special Fabrication - Utilize machinery to customize fabric belts (perforations, v-guides, flex cutting) to customer specifications. Automated Fabrication - Utilize multiple automated machines to customize fabric belts to customer specifications. Things you should know about Habasit's opportunities: Direct hire opportunity Eligible for bonuses and incentives $500 bonus after 90 days of employment $500 additional bonus after 180 days of employment $1000 additional bonus after 365 days of employment $750 referral bonus after 6 months Basic Qualifications Must be 18 years of age Must be cleared on any background screening English literacy Ability to use a calculator and a tape measure. Computer skills a plus Must be able to lift up to 40 pounds. Must be able to stand, walk, sit; use hands and fingers to handle or feel; and reach with hands and arms. Why should you join our team? Our amazing environment keeps safety as its top priority! You can enjoy a collaborative atmosphere in a clean and climate-controlled facility. Our core values is how we thrive, and you will get to work with people who share them: Organizational Pride, Highest Ethical Standards, Quality You Can Trust, Collaboration, Entrepreneurship, and Continuous Improvement. Our opportunities to advance give any qualified associate the opportunity to move to a higher-level job. Our on-the-job training and skills development will ensure your success in your job. Our competitive pay rate of $15.85/hour If you are interested in becoming a part of a World-Class Team, submit your application today! RESPONSIBILITIES OF THIS POSITION - CORE: To support the vision, mission and guiding principles of the company. While performing any procedure, all associates and contract personnel must observe applicable Safety, Health, and Environmental rules and guidelines. The use of appropriate personal protective equipment is required. Attend and participate in training opportunities and seminars relevant to this position. Adhere to appropriate company operating procedures, benefit rules, employment policies and safety policies. RESPONSIBILITIES OF THIS POSITION - PRODUCTION: Follows work instructions and is responsible for good quality Grinds tubes and belts. Measures work piece dimensions to assess conformance. Changes sandpaper when required. Initials work order upon completion of job duty and inspection of work performed as acknowledgment of properly completing task. Checks thickness gauges for accuracy. Performs minor machine maintenance such as oiling machines, dies, or work pieces. Notifies Supervisor of any equipment malfunctions or quality problems. Inspects ground tubes to meet work instruction requirements. Performs a combination of production tasks, which may include loading machinery, positioning work, setting up jobs, adjusting and operating machinery. May load and unload materials, parts or products; stock to designated work areas; pack products and may clean surface of machines and work areas. Operates machinery and equipment. Inspects ground tubes to meet work instruction requirements. Reads job specifications to determine machine adjustments and material requirements. Able to access databases as necessary to retrieve work instructions in order to perform work. Maintain own productivity while performing the duties mentioned above. Prepares material to be move to next station. Checks set-ups at beginning of shift to ensure grinder is in proper operating condition. Notifies Supervisor when supplies need replenishing. Follows all safety rule and procedures. Maintain good housekeeping in department. Performs other duties as required.

Carlisle Weatherproofing Technologies (CWT) is a leading supplier of building envelope solutions that effectively drive energy efficiency and sustainability in commercial and residential applications. We are looking for a Machine Operator to join our second shift EPS team in Prospect, CT. Shift: 6 pm-4:30 am Starting Pay: $23.81+$1.00 for shift differential Job Summary Operate machinery designed to perform a specific portion of the production process for Carlisle Companies Incorporated. Assist Operator II and Operator III on packing and end-of linework, and as needed. Overtime, no travel is required. Duties and Responsibilities: * Operates machinery of assigned department to complete assigned work order. * Receives and reviews work orders. * Communicates the required amount of material needed to perform tasks to other departments. * Continuous observation of machine operation to ensure optimal performance of standard work within the assigned department. * Performs hazard-based functions on machinery, including lock out/tag out and daily equipment inspection. * Stacks, sorts, and bundles material according to assigned department's standard work. * Occasional housekeeping tasks, 5S, and SQDC involvement. * Records data of manufactured material for quality control and improvement functions. * Achieves production goals while complying with all safety requirements. * Assists with quality checks to verify proper parameters are adhered to. * Assists Operators II & III in packaging and end-of-line work, and as needed. * Other duties as assigned. Required Knowledge/Skills/Abilities: * Highly motivated with a good, sound work ethic. * Must demonstrate safe working practices and possess great attention to detail. * Ability to follow Carlisle Companies Incorporated policies, procedures, and processes. * Good communication, organization, and time management skills. * Basic computer, mathematics, and problem-solving skills; ability to use a calculator. * Ability to use measuring devices (gauges, tapes, rulers). * Team player able to follow instructions from both management and peers. * Ability to learn and operate new equipment. * Expectation to understand, participate in, and support company COS initiatives, with focus on developing a lean mindset Education and Experience: * Required: * High School Diploma or GED is Preferred * Must be at least 18 years of age or older. * Prior experience in a manufacturing setting preferred. Working Conditions: * Fast paced manufacturing environment where workers are exposed to both ambient/outside temperatures and dust; working with mechanical parts and pinch points; exposure to increased noise levels. * Hours worked vary based on shift schedule and business volume. * Flexible to the possibility of overtime and weekend hours when required. * Heavy, stationary machinery on the manufacturing floor. * Radio, Calculator, Measuring Devices * Hand tools * Computer (Shop Floor and ERP) Personal Protective Equipment (PPE) Used: * Eye, head, and hearing protection is required at all times on the production floor. * Safety toe shoes (steel/composite) * Hi-Vis Vests * Other PPE as defined by management within the assigned department. BENEFITS AND PERKS Our employees' well-being is crucial to Carlisle's success. Despite the nationwide increase in healthcare costs, Carlisle has maintained the same employee premiums for four consecutive years by absorbing the rising medical insurance expenses. Furthermore, you have the flexibility to tailor a benefits program that perfectly suits your needs. Benefits offered: * Medical, Dental, and Vision insurance- DAY 1 * Life and Accidental Death & Dismemberment Insurance * Leave & Disability Income Protection (FMLA, LOA, PPL, STD, LTD) * Employee Assistance Program (EAP) * Health Advocate - health care concierge service * PTO - sick days, 11 holidays, vacation * 401K Retirement Savings Plan with company match * Employee Stock Purchase Plan * Flexible Spending accounts (commuter benefits, flexible spending accounts, health savings account) * College Scholarships for Dependents * Tuition Reimbursement

The Role As a Production Tech, you'll be an essential part of the process of turning raw cannabis flower into our beautiful line of medicated products. Under the guidance of the management team, you will produce, package, and handle products, perform inventory duties, adhere to compliance requirements, and keep safety as your top priority while working daily in our facility. Here at GTI, we are looking for true team players who are the perfect hybrid between precision and energy. Responsibilities Deliver on production goals, while focused on safety and quality Produce product per recipes and SOP's, maintaining high quality standards Package product into proper containers with proper labeling to ensure compliance with state regulations Ensure all standards for processing procedures and laboratory protocols are followed Compliance with local and state regulations Adherence to quality control methods throughout entire process Documentation of manufacturing methods are created and maintained Electronically convert packaged products in the state traceability system Manage time efficiently to meet goals while consistently producing quality product Practice good housekeeping habits throughout the facility with focus and personal contributions towards a clean and organized assigned work area at the end of the assigned shift Exhibit competency in basic organizational skills, communication skills and Windows based operating software Use independent judgment regarding product processing, keeping quality and goals in mind Help create a positive environment by having a positive attitude and by being self-motivated Other duties as assigned Qualifications High School Education or GED graduate; some college or college graduate preferred 1-2 years' experience in manufacturing, food processing, warehousing, and/or inventory preferred Equivalent combinations of education and experience may be considered Must be able to work well in a group and independently; demonstrate self-motivation and initiative Must be able to adapt quickly to changes in policy, procedure, and technique Employee must exhibit personal hygiene and follow the health guidelines set forth by GTI Ability to listen well and communicate effectively with various audiences Ability to perform monotonous tasks with great efficiency without losing qualities Must be able to follow basic instructions and accept constructive criticism Prior cannabis experience not required Additional Requirements Must have a valid driver's license or State ID card Must be a minimum of 21 years of age Must pass all required background checks Must be and remain compliant with all legal and company regulations for working in the industry Must be approved by the Cannabis Compliance Board to receive an Agent Card Working Conditions While performing the duties of this job, the employee is regularly required to perform reaching, grasping, bending, stooping, talking, hearing, seeing and repetitive motions. Must be able to sit and/or stand for extended periods of time while maintaining focus. PHYSICAL DEMANDS: Must be able to lift, carry, and balance up to 50 pounds AND must be able to do so with extreme care and caution when working with product. Work involves daily exposure to allergens (such as cannabis, tree nuts, and coconut oil).

Performs a wide variety of production duties including, but not limited to, assembly, wiring, and inspection of residential heating products following standards, practices, and procedures. Essential Duties and Responsibilities: Assembles and packs required components to produce a variety of heating systems Inspects assembled components and systems for overall quality, proper appearance, and conformance to requirements Identifies and records specific products for further production requirements Reports any defective materials, components, off-quality finishes, and unusual situations to supervisor Operates and maintains lift and platform trucks to move materials and products Utilizes and maintains hand and air tools, electrical and air testing equipment, rivet guns, carton staplers, utility knives, tape measures, and other necessary production tools Packages items and/or products to complete shipments as required Assures counts and condition of materials and items and notes discrepancies Delivers goods and items to appropriate party or to designated area Monitors and maintains safe work areas and reports any unsafe equipment, materials, or practices to supervisor Performs similar or related duties as requested or required

Job Description Qualifications: Education and/or Work Experience Requirements: At least (3) years experience in a production environment Experience with metal fabrication processes such as die forming, roll forming, welding strongly desired Press operation and setup strongly desired Experience with basic measuring equipment such as calipers or micrometers Experience reading and interpreting job instructions and blueprints Experience in a smaller production environment Experience with closely related seal products a plus Responsibilities: Perform specific metal fabrication operations as specified by supervisor. Read and interpret process sheets/work instructions to perform assigned tasks. Set up and operate both die forming and roll forming equipment. Measure work piece dimensions to ensure accuracy to blueprint. Work with manufacturing engineers and other production operators to resolve production issues.

Join Our Team as a Production Operator - 2nd Shift (3:30 pm - 11:30 pm) At Rea Magnet Wire, we don't just produce magnet wire - we are POWERING WHAT'S NEXT. If you're experienced in operating safely, quality production, and driving process improvements, we want you on our team! ⚡️ Ready to take the next step? New Start Pay: $24.00/hour $25.00/hour at 90 days $26.00/hour at 1 year Main Responsibilities: Set Up and Operate Taping Machines Follow Specification for Insulation Wire Inspect Finished Products and Testing Maintain Work Area Clean Comply with PPE and Safety Requirements Ability to train and support new employees by sharing job knowledge, demonstrating correct procedures, and reinforcing safety and quality standards until they achieve full qualification. Set up and operate taping machines to insulate aluminum and copper wire based on order specifications for insulation type, width, thickness of layers, and footage. Additional Responsibilities: Inspect product diameter Set tape overlap and registration Monitor product packaging Tag and identify finished products Utilize material handling equipment Operate welding and swaging devices Perform safety inspections Maintain material supply Record production data We are an Equal Employment Opportunity/Affirmative Action/Vet/Disability Employer Job Type: Full-time Pay: $24.00 - $26.00 per hour Benefits: 401(k) 401(k) matching Dental Insurance Employee assistance program Employee discount Flexible spending account Health insurance Health savings account Life insurance Paid time off Referral program Tuition reimbursement Vision insurance Schedule: Monday through Friday 2nd Shift (3:30 pm to 11:30 pm) 8-Hour Shift Overtime Weekends as needed Position Specifications Minimum Qualifications: High school diploma or GED required. At least 2 years of recent manufacturing experience. At least 2 years of recent Machine Operator experience. Knowledge of safety, distribution, and manufacturing best practices. High level of mechanical aptitude and hands-on experience with basic hand tools and measuring devices, verified through work history and references. Preferred Qualifications: Preference for candidates demonstrating recent, consistent work history. Preference for candidates with a strong work ethic, reliability, and a demonstrated commitment to professional growth in a manufacturing setting. Forklift certification is preferred. Physical Demands and Work Environment: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Demands: Frequently uses hoist to push/pull reels weighing up to 3,200lbs Frequent standing, walking and bending Frequent use of arms below shoulder height; minimal use of arms above shoulder height Frequent reading and interpreting test data and visually inspecting wire Frequent lifting up to 25lbs Work Environment: Work performed in a plant manufacturing environment. Slippery floors due to steel plates. Incumbent will occasionally be exposed to Cold Temperatures 80 degrees. The environment is well lit; the noise level is often minimal but incumbent may be exposed to higher than 85 decibels Work Location: In person

Job Type: Full-Time; Non-Exempt Shift: Monday to Friday - 5:45am to 2:30 pm Hourly Rate: $17/hr Who You Are: As a Production Technician, you will be responsible for the packaging and labeling of the finished goods at our cultivation and manufacturing centers. You will be responsible for the production of a variety of finished products including packaged, dried flower, pre-rolls, vape cartridges and vape pens, and infused products. Our production team is expected to maintain quality control measures to ensure high-quality products and will carry out day-to-day tasks including prepping, packaging, and labeling per standard operating procedures set by Curaleaf and our production management. What You Will Do: * Stage product and packaging supplies across various production lines to meet daily production schedule * Perform quality assurance protocols as designated by Curaleaf's procedures * Increase operational efficiency and reduce waste through ownership, teamwork, communication and collaboration * Perform in-process and post-process quality assurance, testing and conducting visual inspections to ensure all product meets or exceed Curaleaf's specifications and patient's expectations * Ensure 100% compliance involving proper weighing, data recording, product tracking and security throughout the entire packaging process * Operate in an efficient manner that also complies with all OSHA regulations, Curaleaf SOP's and all applicable required procedures * Ensure each product is properly labeled in compliance with state regulations * Work in a quick and efficient manner and strive to consistently increase productivity * Maintain the organization and cleanliness of the extraction room while performing all duties What You Will Bring: * High School Diploma or G.E.D minimum * Effective communication skills working in a team-based environment * Strong attention to detail skills working in a high-volume production environment * Strong work ethic and the ability to be punctual, reliable, and contribute to a positive, professional work environment * Ability to be trained on various production equipment, SOPs, and consistently meet performance expectations set by leadership * Ability to perform repetitive tasks for long periods of time Even Better If: * You have one year of manufacturing and packaging experience with a focus on ensuring product safety, consumer safety and satisfaction, and high product quality is strongly preferred Physical Requirements: * Allergen warnings, potential exposure to dust, pollen, and plant pathogens. * Exposure to cleaning solvents, such as high volumes of isopropyl alcohol. * Daily use of provided PPE, such as masks, hair nets, beard covers, respirators, boot covers, scrubs, non-slip shoes, and Tyvek suits as necessary. * Ability to work in confined spaces * Exposure to loud noises, including but not limited to air compressors, packaging equipment, and alarms. * Exposure to CO2 manufacturing procedures at OSHA approved CO2 levels. * High-stress tolerance, adaptable, flexible ability to work in an ever-changing environment

Production Technician will support their team in order to manufacture Metal, Rubber, Teflon, and Silicone Hose assemblies. MAJOR JOB DUTIES AND RESPONSIBILITIES(List in order of importance): Works safely within the parameters of and comply with company policies. Responsible for Supporting and building various Hose assemblies per work instructions and prints, cleaning, and packaging. Operate and maintain production equipment as per SOPs. Participate in continuous improvement processes. Comply with ISO and cGMP regulations. Daily organization (5S) and cleanliness of work area to comply with regulatory requirements. Participate in inventory cycle count programs and accurate record results. Performs other duties as assigned. Preferred Qualifications: Highschool Diploma/ GED or equivalent work experience in related field. Computer skills: basic knowledge of Word and Excel. Basic experience using Lean Manufacturing concepts. Knowledge, Skills, and Abilities: Ability to work in a team environment. Comfortable reading and interpreting product schematics Prior experience in a manufacturing environment, preferable for bioprocess, medical devices or other GMP environment. Must be able to lift 50lbs minimum. Detailed oriented and disciplined. Good communication skills.

Position Type: Full time, 40h/week. OT as business needs dictate FLSA Classification : Non- exempt (hourly) Salary Range: $24.00-27.00/ hour paid weekly . The actual pay range will depend on varying circumstances and individualized factors, such as job-related knowledge, skills, experience, and other objective business considerations. Reports to : Production Manager Company description: Roto North America is a subsidiary of Roto Window and Door Technology, a global leader in window and door hardware, with 15 production plants and more than 30 subsidiaries worldwide. Through its 2 companies, Roto Frank of America, Inc. and Roto Fasco Canada, Inc., Roto North America has been manufacturing and offering a variety of leading North American and European window and door hardware products in the USA and Canada. To learn more about Roto Frank of America please visit us at: Welcome - Roto North America Summary: The Machine Operator will be responsible for the advanced tasks of a Machine Operator, to include daily production and quality control of parts manufactured on the laser, injection moulding, machine programming, and operation of a component stamping press. Essential Functions: Accountable for production with machine operation and programming, to include injection moulding, laser, and component stamping press. Tasks: Able to set up and program injection molding machines. This includes insertion of molds and programming in all run criteria and adjusting as needed. Accountable for running daily production and performing hourly quality checks to ensure compliance with function, quality, and cosmetic specifications. Capable of using basic measuring equipment such as calipers, Ensure compliance. Observe all safety requirements. Creating nonconforming reports for out of specification product. Posting production orders in SAP. Inspects equipment prior to use to ensure proper setup and alignment; performs basic and routine adjustments. Able to maintain required efficiency rates. Conduct preventative maintenance on injection molding machines, dryers, and chillers. Able to train Machine Operator II employees on running equipment. Able to drive a forklift. Excellent organizational skills. General housekeeping of work area. Able to set up component stamping/laser/injection moulding machines. Employee must show up to work on time and be able to work overtime as needed. Performs other related duties as assigned. Minimum Required Education: High school diploma or equivalent required. Required Work Experience: 2 Years of related Manufacturing experience Work environment and Physical Requirements: Working conditions are based in a manufacturing setting. To perform this job successfully the individual must be able to stand and/or sit for prolonged periods of time. Must be able to traverse production facility and climb ladders. Must be able to lift and or move up to 45 pounds at a time. Must have manual dexterity in order to use tools or setup machines as directed. Perform repetitive tasks that entail frequent bending and stooping. Visual acuity to read instructions, operate machines, and inspect parts produced. Must wear personal safety equipment, as required. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Benefits: Roto offers an attractive salary and benefits package: 401(k) 401(k) matching Employee assistance program Employee discount program Medical insurance Dental insurance Vision insurance Flexible spending account Health savings account Life insurance Short Term Disability insurance Voluntary Long Term Disability insurance Paid time off Paid Holidays

When you join us at Thermo Fisher Scientific, you'll be part of an inquisitive team that shares your passion for exploration and discovery. With revenues of more than $40 billion and the largest investment in R&D in the industry, we give our people the resources and chances to create significant contributions to the world. Stafford CT/FSD Join our outstanding team in Stafford Springs, CT. Contribute to top-tier manufacturing in an encouraging atmosphere. Discover Impactful Work At Thermo Fisher Scientific, you will play a pivotal role in maintaining quality and production standards, ensuring our products meet the highest levels of excellence. A day in the Life Operate production equipment and address mechanical issues Perform quality tests and maintain accurate records Collaborate with team members to ensure smooth operations Keys to Success Achieve flawless execution by strictly adhering to safety and quality protocols, and successfully implementing continuous improvement strategies. Education High school diploma or equivalent experience required. Experience Basic knowledge of machinery preferred. Experience with production equipment is a plus. Familiarity with quality testing. Knowledge, Skills, Abilities Basic math skills including use of formulas, decimals, and fractions. Knowledge of simple measuring devices. Ability to stand continuously for an 8-hour period. Physical Requirements / Work Environment This role entails standing for long periods, operating machinery, and handling materials. You must be able to work in a dynamic and sometimes fast-paced environment. Benefits We offer competitive remuneration, annual incentive plan bonus, healthcare, and a range of employee benefits. Thermo Fisher Scientific offers employment with an innovative, forward-thinking organization, and outstanding career and development prospects. We offer an exciting company culture that stands for integrity, intensity, involvement, and innovation! Compensation and Benefits The hourly pay range estimated for this position based in Connecticut is $15.26-$22.88. This position may also be eligible to receive a variable annual bonus based on company, team, and/or individual performance results in accordance with company policy. We offer a comprehensive Total Rewards package that our U.S. colleagues and their families can count on, which includes: A choice of national medical and dental plans, and a national vision plan, including health incentive programs Employee assistance and family support programs, including commuter benefits and tuition reimbursement At least 120 hours paid time off (PTO), 10 paid holidays annually, paid parental leave (3 weeks for bonding and 8 weeks for caregiver leave), accident and life insurance, and short- and long-term disability in accordance with company policy Retirement and savings programs, such as our competitive 401(k) U.S. retirement savings plan Employees' Stock Purchase Plan (ESPP) offers eligible colleagues the opportunity to purchase company stock at a discount For more information on our benefits, please visit: *****************************************************

SBNA, Inc produces molding compounds that cover a wide range of application and industries. We are a global organization committed to exceeding our customers' expectations in material performance, customer service, technical expertise, and product quality. learn more about us at our company website ******************************************************************** This position is onsite Monday - Friday 3p-11p. Potential for scheduled overtime. Summary of Job Duties: Perform routine operations to select, weigh and mix various materials to prepare specified mixes for milling or twin screw operations. Use care to order and select correct raw materials, weigh accurately and mix to standard operating procedure. Insures proper operating inventory through communication with Warehouse. Load mixers from mezzanines, mix to prescribed time cycles and facilitate the transfer of the mixer contents to compounding equipment. Maintain constant flow of material to operations. Disassemble and clean all elements of process line equipment as required or on change-over of material. Assist in all efforts to bring non-operation process line equipment back into operation. Provide relief as necessary to maintain continuous operation of process line. Performs in-process control testing. Change/stage WIP containers when necessary. Make, record, log, and chart appropriate product and process control records. Detect unusual conditions, defective materials, operating difficulties, or process upsets, and report to supervisor. Requires the use of fork lift trucks and other material handling equipment. Observe prescribed or necessary safety precautions and work according to good manufacturing and housekeeping practices. Train other operators as assigned. Implement and maintain the 5S systems in the Plant. This includes sorting, straightening, and cleaning activities including but not limited to vacuuming, equipment cleaning and inspection and painting. Perform other related job duties as required or necessary. **Caution: This position requires the direct handling of hazardous materials. Personal protective equipment will be provided and must be used. E-verify employer. Background check and drug screen before hire. Equal Employment Opportunity and Non-Discrimination Statement: Sumitomo Bakelite North America Holding Inc., and all its affiliate companies, is committed to the principles of equal employment opportunity and non-discrimination. We do not discriminate based on race, color, gender (including pregnancy, childbirth or related medical conditions), religion, national origin, sexual orientation, gender identity or expression, physical or mental disability, marital status, age, military or veteran status, genetic information, height, weight, familial status or any other applicable legally protected characteristics.

8:30 - 6:30pm Thursday- Sunday Printing Production Key Responsibilities: Operate and monitor printing, inserting, and finishing machines Load materials such as paper, envelopes, and supplies Perform basic machine adjustments and troubleshoot minor issues Inspect printed materials for accuracy and quality Package, label, and prepare jobs for mailing or shipping Maintain a clean, organized work area Follow safety guidelines and production procedures Experience: Machine operation: 2 years (Required)

Machine Operators needed for Plastics Manufacturer in Shelton, CT! Hours: Rotating 12 hour shift schedule, 7pm-7am Pay: Starting at $20/hour (up to $24/hr based on experience!) Key responsibilities of a Machine Operator: Partners with leads, mechanics and other production employees to address production issues and implement solutions. Loads and unloads material rolls from machines, verifies and sets machine settings per the sheet settings in a safe manner. Performs general production activities to ensure efficient production of high-quality product. Operates thermoforming, automation, and auxiliary equipment (i.e., case tapers, grinders, stackers). Inspects finished or in-process products against company standards and specifications for irregularities or reject. Manages proper and timely starts/stops/restarts for machine, removes scrap and rewind. Skills and Qualifications of a Machine Operator: High school diploma or general equivalency degree (GED) or equivalent combination of education and experience. Minimum of 6 months experience in a manufacturing environment or similar relevant experience. Read micrometers and calipers, digital force gauge, protractors, pressure gauges, temperature thermocouples. Westaff Offers WEEKLY PAY, MEDICAL, and FREE ONLINE CLASSES APPLY TODAY for IMMEDIATE consideration! Military and Veterans are Encouraged to apply!

Job DescriptionBenefits: 401(k) matching Dental insurance Health insurance Opportunity for advancement Paid time off Training & development Vision insurance Closets by Design is a nationally recognized leader in home organizing systems. We design, manufacture, and install a complete line of custom closets, home office furniture, media systems, wall-beds, garage cabinetry and more. We desire motivated, organized, caring individuals who have a passion to provide outstanding craftsmanship and superior customer service. We are currently seeking an enthusiastic and motivated Production Operator to join our growing team! Summary/Objective: The Production Operator position is responsible for operating wood cutting and finishing equipment, maintaining production records, and communications associated with activities of equipment, product, and customer specification. They are responsible for the machine and builds including its condition and safe operation. Must maintain product quality and production output in accordance with company and customer standards. Essential Functions: Ability to read work orders to determine profile type, machine setup procedures, and type of build to be cut. Select and install cutting heads and all proper tooling on machine according to the pattern. Run materials through machinery and inspect for proper profile specifications. Make any required adjustments needed before producing order. Use machinery to cut wood to customer specifications. Follow production schedules. Responsible for general machine/tool maintenance. Check for proper lengths and quality, change tooling when worn. Complete production records. Maintain a clean/safe work area at all times. Perform other duties as required. Competencies: Ability to operate machinery safely and determine when maintenance is needed. Possess strong mechanical aptitude. Consistently meet project deadlines. Practical mathematic and measuring skills Must follow company policies, safety instructions, and wear required protective equipment. Able to function effectively as part of a production team. Dependable, works well with others, self-motivated. Required Education and Experience: High school diploma, GED or equivalent 1+ year of experience machine operation Ability to communicate with supervisors and co-workers Must be able to follow directions + follow specific work procedures/steps Experience with hand and power tools Mathematical aptitude Working Conditions and Physical Demands: While performing the duties of this job, the employee is exposed to airborne particles, dust, debris, moving forklifts, noise, and vibration. Physical demands include: Walking: Occasionally between work stations or to obtain parts and supplies. Lifting: Lift and carry up to 50 pounds for short distances. Schedule: Monday - Friday from 7:00 am to 3:30 pm. Benefits: 401(k) match Dental insurance Health insurance Holidays and Paid time off Vision insurance Open door policy Work Location: Bethel, CT

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at *********** We're always looking for talented individuals to join our team. Whether you're an experienced manufacturing professional or just starting your career - TTM offers a supportive workplace where all skillsets can thrive. Why Join Us? At TTM, we believe in offering our employees an environment where they can make a real impact on the work we do. Here's a look at what we provide our employees to set them up for success. * Career Development: We invest in your growth - our Operator Advancement Program supports your goals. We provide operators and assemblers at all levels the opportunity to certify their skills and build their career with us up to 3 times a year by applying to the OAP program. TTM promoted 68% of applicants in the program's first year! * Competitive Compensation: We offer a competitive package that reflects your skills and experience along with annual compensation reviews to ensure your growth is aligned with your performance and market trends. * Comprehensive Benefits and PTO: Including health, dental, and vision insurance to keep you at your best. Enjoy 10 paid holidays and 3 weeks of paid time off annually to recharge. TTM strives to invest in our team members at all levels, starting on your first day. To support the growth and development of new hires, this position is eligible for a 90 Day Evaluation that includes a pay increase if key performance indicators are met. Scope: Production Operator- To establish parameters for cutting flex acrylic and adhesive material, and to ensure proper tacking and pressing of coverlay material to cores, boards and panels. The operator is also familiar with all of the operations necessary in producing quality product in an efficient manner. Operator is available as needed to operate throughout the lamination department including but not limited to layup, rout, press and breakdown according to production needs Duties and Responsibilities: * Maintain a safe, neat and orderly workplace * Ability to operate computer, label makers, printers, Graphtec cutting equipment * Follows proper handling/department procedures for hot irons/waffle presses per JSA * Monitors and produces quality product. This is done by following all processing instruction * Selects and sorts core layers, gathers other production materials, performs cutting/tacking/waffling operation on product by following all instructions * Ability to identify product materials: rigid vs flex * Operates Lamination presses, breaks down pressed panels, inspect pressed panels. * Follows all work instructions to accurately tack and press coverlay materials to core layers. * Complete all internal departmental documentation accurately including travelers, daily preventative maintenance logs * Read and interpret shop traveler to verify count and quality of previous process steps is met * Read and interpret stack-up/construction and documented instructions or notes for special requirements * Communicate/coordinate with zone management team on inventory * Enter jobs and quality information in the Manufacturing Control System * Immediately communicate to your Supervisor, Manager or Process Engineer any discrepancies found in materials, product, or equipment * Facilitates and attends meeting, communicates regularly with managers and supervisors, suggests and composes procedural changes, communicates to supervisor about safety hazards and issues. * Generates, accumulates, and handles hazardous wastes generated in daily operations, as directed by the Environmental, Health, and Safety Manager. * Responsibilities include the reporting of all accidents, near misses and safety concerns. Perform their job duties utilizing the required and appropriate personal protective equipment (PPE). Full participation in safety training and the ability to understand and follow the directions identified in Job Safety Analysis (JSA), PPE Assessments, Material Safety Data Sheets (MSDS) and all Safety Procedures and Alerts. * Performs other tasks as assigned by management and cross-trains as needed to assist with production needs Note: The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer. Essential Knowledge and Skills: * Ability to read and comprehend English written instructions, including manufacturing work orders, customer specifications, blueprints, and shop control documents. * Quality centered mindset with strong attention-to-detail, mathematical, and technical aptitude. * Able to be a positive team member while also working independently. * Manual dexterity (hand/finger/eye coordination) is essential to the Machine Operator job. * General computer skills and ability to update electronic records, enter data into systems, and send emails. * Able to sit or stand throughout a shift and independently push, pull, or lift 10-40-pounds. * Able to read, write, and communicate in English to the degree necessary to perform the job. * Consistently meet attendance requirements. Willingness to work overtime, including weekends as necessary. * Comfortable working within a manufacturing environment that includes machinery, moving parts, noise, and chemicals. * Ability and willingness to cross-train in other departments, learning to operate other machinery. Education and Experience: Education: * High school diploma or GED is required. #LI-KR1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401K, Flexible Spending Account, Health Savings Account, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available 1st of the month following date of hire. Compensation for roles at TTM Technologies varies depending on a wide array of factors including but not limited to the specific office location, role, skill set and level of experience. As required by local law, TTM provides a reasonable range of compensation for roles that my be hired in New York, California and Colorado. For California-based roles, compensation ranges are based upon specific physical locations. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.