Production Associate Jobs in York, PA

The Production Supervisor is responsible for overseeing and managing the daily production activities, ensuring efficient, safe, and high-quality production processes. This role ensures that the production team meets operational goals, production schedules, and safety standards while maintaining product quality and meeting cost targets. Key Responsibilities: Supervision of Production Staff: Lead, manage, and supervise production teams to ensure smooth daily operations. Provide guidance and support to team members, ensuring they are adequately trained and performing their tasks efficiently. Assign daily tasks and monitor team performance. Address any team performance issues and escalate as necessary. Production Planning and Scheduling: Coordinate with production managers to develop and implement production schedules. Ensure production targets and deadlines are met. Adjust production schedules as needed to accommodate delays, equipment failure, or changes in demand. Quality Control and Assurance: Monitor production processes to ensure products meet the company's quality standards. Inspect finished goods and ensure proper documentation for quality control. Collaborate with the quality control team to resolve any quality issues. Safety and Compliance: Ensure all production activities comply with health and safety regulations. Conduct safety audits, identify potential hazards, and implement corrective actions. Promote a safe working environment by ensuring proper safety training for employees. Inventory and Materials Management: Monitor inventory levels to ensure materials and supplies are available for production needs. Work with the procurement and warehouse teams to ensure proper stock levels and timely delivery of materials. Minimize production downtime by managing materials effectively. Equipment Maintenance: Ensure production equipment is properly maintained and functioning optimally. Work closely with the maintenance team to schedule repairs and preventive maintenance. Troubleshoot equipment issues and oversee equipment setup for production runs. Continuous Improvement: Identify opportunities for process improvements and cost reduction. Implement lean manufacturing principles to improve production efficiency. Promote a culture of continuous improvement by involving team members in problem-solving and decision-making processes. Reporting and Documentation: Maintain accurate production records, including production output, downtime, and quality metrics. Prepare reports on production performance for upper management. Ensure compliance with company policies and industry regulations by maintaining necessary documentation. Communication and Coordination: Facilitate effective communication between shifts, departments, and management. Provide timely updates on production status, challenges, and performance metrics. Qualifications: Education: High school diploma or equivalent; associate's or bachelor's degree in manufacturing, engineering, or related field preferred. Experience: At least 3-5 years of experience in a production environment, with at least 1-2 years in a supervisory role. Familiarity with production processes, equipment, and quality control standards. Skills: Strong leadership and team management skills. Excellent problem-solving and decision-making abilities. Ability to communicate effectively at all levels of the organization. Knowledge of safety regulations and practices. Proficiency in Microsoft Office and production management software (ERP systems, etc.). Physical Requirements: Ability to lift up to 50 pounds and stand for long periods. Willingness to work in a manufacturing or factory environment, which may involve exposure to various environmental conditions. Work Environment: The role typically operates in a manufacturing or industrial setting. The supervisor may need to work in both office and production areas, depending on the needs of the shift.

Driven by integrity and united by the people-and-pet bond, we find strong purpose in the work we do and an even greater joy in those we get to work alongside. Together, we harness the expertise of our long-standing tradition of excellence to embrace possibility and continuously push to do what's never been done before in pet care. Discover your purpose and fuel your passions when you bring your love of pets to a team that prides itself on the power of togetherness-We are Proudly Connected. Purely Driven. Position Summary Since 1969, our factory has been a cornerstone just eight miles west of Harrisburg. Situated at a transportation crossroads, it offers quick access to major cities like Baltimore, Boston, and New York. As one of the largest manufacturers in the area, we produce a wide range of dry pet food, including beloved brands like Puppy Chow , Pro Plan , and Friskies . Beyond our work, we support local animal shelters, enriching the lives of pets everywhere. We're also doing our part to care for the environment we share, like conserving water, investing in renewable electricity and maintaining zero waste for disposal. Join us in Mechanicsburg, where small-town living meets big-city perks, and together, we make a difference. As a Production Operator you safely and efficiently operate packaging equipment. You will monitor and operate equipment, lead troubleshooting and make adjustments to provide optimal equipment performance. Operators ensure the lines are continuously supplied with materials and store, stack, and load finished goods safely. This position will be responsible for reviewing and actively participating in risk assessments. Safely operate, monitor and problem solve throughout the packaging area Supply packaging materials and maintain sanitation to high standards as issues are identified Load and unload raw/packaging materials and finished goods Maintain accurate inventory data through proper data entry Perform Preventative Standard Routines to include performance of basic lubrication, repairs, inspection, and identify defects to complete or coordinate repairs Ensure that products meet all quality standards by monitoring production parameters, sampling/testing and responding accordingly The pay progression plan is as follows: Production Operator E: $24.09 Production Operator D: $26.36 Production Operator C: $29.77 Production Operator B: $34.33 Requirements High School Diploma or GED required 1+ years of experience in a fast-paced and performance measured environment The approximate hourly pay for this position is $24.09. Please note that the pay range provided is a good faith estimate for the position at the time of posting. Final compensation may vary based on factors including but not limited to background, knowledge, skills, and abilities as well as geographic location of the position. Nestlé offers performance-based incentives and a competitive total rewards package, which includes a 401k with Company match, healthcare coverage and a broad range of other benefits. Incentives and/or benefit packages may vary depending on the position. Learn more at About Us | Nestlé Careers (nestlejobs.com). REQUISITION ID 338719 It is our business imperative to remain a very inclusive workplace. To our veterans and separated service members, you're at the forefront of our minds as we recruit top talent to join Nestlé. The skills you've gained while serving our country, such as flexibility, agility, and leadership, are much like the skills that will make you successful in this role. In addition, with our commitment to an inclusive work environment, we recognize the exceptional engagement and innovation displayed by individuals with disabilities. Nestlé seeks such skilled and qualified individuals to share our mission where you'll join a cohort of others who have chosen to call Nestlé home. The Nestlé Companies are an equal employment opportunity and affirmative action employer seeking diversity in qualified applicants for employment. All applicants will receive consideration for employment without regard to race, ethnicity, color, gender, gender identity, age, religion, national origin, ancestry, disability, perceived disability, medical condition, genetic information, veteran status, sexual orientation, or any other protected status, as defined by applicable law. Prior to the next step in the recruiting process, we welcome you to inform us confidentially if you may require any special accommodations in order to participate fully in our recruitment experience. Contact us at accommodations@nestle.com or please dial 711 and provide this number to the operator: **************. This position is not eligible for Visa Sponsorship. Review our applicant privacy notice before applying at **********************************

Come Join Us! From apartments in New York to hospitals and stadiums in Dallas, libraries at prestigious universities to creating modern retail experiences, our teams contribute architectural glass and building products to projects that shape the way people live, work, heal, learn, and play. At OBE, the work of our employees truly matters. With over 6,500 employees, we operate more than 80 manufacturing and distribution facilities in five countries. You can see some of our favorite projects here. Start your journey with OBE and help us build the future. What You'll Get to Do The Production Associate is focused on assembling and sealing all joinery on metal parts to window sashes, vents, and frames and reports to the Department Supervisor. This role is perfect for an individual who has good communication skills, follow instructions well, and has good attention to detail. A vital member of Production, this is an opportunity to build a career with an industry leader. Job responsibilities include: Follow sealing instructions Assembles parts according to specified pattern and sequence Assembles additional parts as required (hardware, adaptors, and grids) Inspect all joints that are sealed What We Are Looking For High School Diploma/GED Ability to read a tape measure Ability to work on your feet for long periods of time Ability to lift up to 50 lbs. What OBE Offers You Benefits that benefit you - industry competitive benefits at the lowest cost to the employee Work-life balance - PTO and holidays, including floating holidays you can choose Compensation that rewards your hard work - A pay-for-performance culture with potential for annual raises and bonuses Training - We will equip you with the knowledge and skills you need to succeed OBE is an Affirmative Action and Equal Opportunity Employer. EOE/Vet/Disability--If you want to know more, please click on this link. Oldcastle BuildingEnvelope is an E-Verify Employer.

TAIT partners with artists, brands, IP holders and place makers to bring culture-defining, never-before-seen experiences to life. With a legacy of innovation spanning over 45 years, TAIT has grown from pioneering in rock 'n' roll concert staging to setting the global standard for extraordinary live events and experiences through cutting-edge technology, precision engineering, and creative design. TAIT's 20 global offices have developed iconic productions and experiences in over 30 countries, all seven continents, and even outer space for renowned performers, theme parks, exhibits, and venues across the globe, including partnerships with Taylor Swift, Cirque Du Soleil, Royal Opera House, Nike, NASA, Bloomberg, Google, Beyoncé, and The Olympics Position Purpose The **Production Technician** will assist with all manufacturing, assembly, and fabrication on TAIT products and projects in a group setting with minimal guidance from the group lead. This position will require the Production Technician to be highly functional in multiple disciplines and help support the fabrication team to deliver a finished product to TAIT's standards of quality. This position also provides access to continued growth within the department based on skillset and training. Essential Responsibilities + Adhere to and implement proper fabrication and assembly techniques. + Maintain accurate dimensional tolerances set forth on drawings. + Produce a quality product while focusing on TAIT brand quality and standards. + Clean and maintain workspace area, facility tools, and equipment. + Ability to read, understand, and follow blueprints, internal drawings, and SOP's. + Adhere to all company safety policies and procedures. + Attend meetings, seminars, and training sessions as required. + Perform assigned duties according to the policies and expectations prescribed by the company. Minimum Qualifications + High School Diploma or GED. + One (1) year of instructional/professional training. + Skill set focused in general fabrication, carpentry, complex mechanical assembly and/or TAIT experience preferred. + Ability to identify materials and hardware. + Ability to read, understand, and follow blueprints and internal drawings. + Knowledge in rigging equipment and practices (WLL, COG, & LAF) + Advanced knowledge and experience using precision measuring instruments and general manufacturing tools (wood, plastic, metal). + Effective oral and written communication skills. + Ability to use (proficient in) TAIT business systems (Epicor, Slack, and Box). + Capacity to work independently, and as a member of a small team. + Ability to handle changing priorities in a fast-paced environment. + Flexibility with work schedule. Normal work schedule is forty hours per week; however operational demands may necessitate other schedules to meet business needs. Working Conditions The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is required to frequently walk, bend, climb, push, pull, twist, squat, stoop, and kneel each day. Specific requirements are: + Must be able to stand for extended periods of time + Must be able to lift or move 50 lbs. + Must be able to carry 50 lbs. + Must be able to pull or push 50 lbs. + Must be able to reach overhead + Must be able to work in small, sometimes awkward spaces and positions. TAIT is an equal opportunity employer fully committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected characteristic as outlined by international, national, state, or local laws.

Since 1869 we've connected people through food they love. Our history was created by remarkable people, ideas, and innovations. It serves as inspiration and foundation for our future success. We're proud to be stewards of amazing brands that people trust. Our portfolio includes the iconic Campbell's brand, as well as Michael Angelo's, noosa, Pace, Pacific Foods, Prego, Rao's Homemade, Swanson, and V8. In our Snacks division, we have brands like Cape Cod, Goldfish, Kettle Brand, Lance, Late July, Pepperidge Farm, Snack Factory, and Snyder's of Hanover. We foster a culture of belonging where people come first, and diversity is embraced. And we live our values, always, while setting the highest standards for performance. Here, you will make a difference every day. You will be part of a dynamic, collaborative, and competitive team. You will be supported to build a rewarding career with opportunities to grow, innovate and inspire. Make history with us. GENERAL JOB DESCRIPTION The Salty Packaging Machine Operator, under general supervision, is responsible for the safe, efficient, and continuous operation of packaging machinery while maintaining continuous flow of product to the packaging lines. Responsibilities include making minor adjustments to the machinery to achieve the correct product, troubleshooting, maintenance of machinery, and record keeping. DUTIES AND RESPONSIBILITIES * Maintains shift documentation (i.e., Metal Detector and Batch Order Verifications) * Reads production schedule and plans accordingly. * Reads and interprets schedule in MicroStrategy. * Able to print labels on different printers, choosing correct program for each printer; move eye and clean printers. * Perform nitrogen testing. * Efficiently maintains the operation of packaging machinery by monitoring codes, dates, and prices. * Maintains an adequate supply of roll stock and ensures all packaging materials are available for each machine. * Set up and write new programs for bag makers. * Writes and/or edits machine micro logic as needed to maintain an efficient and low waste operation. * Creating and modifying code dates. * Performs preventative maintenance on equipment. Sets up and makes minor scale repairs and adjustments. * Perform span calibration and/or adjustments on scales, adjust scales linkages so it opens and shuts correctly, make minor adjustments to formers. * Efficiently operates packaging equipment which may include case sealers and robot cells. This includes but is not limited to machine setups, troubleshooting, changeovers, proper running, procedural adjustments, sanitation cleanup, preventative maintenance, and shutdown. * Properly plans ahead for machine changeovers and efficiently changing from one product item to another. * Monitors and adjusts each machine to ensure proper cut off film and bags have proper end seals and back seals as required. * Ensures machines are running at standard speeds. * Monitors product appearance and adheres to weight control program. * Performs bag weight checks every 20 minutes and inspects for quality issues. * Able to run bagger, scales, counting conveyor, seal checker, weight check, case packers, and other auxiliary equipment as needed. * Identifies and resolves packaged product quality issues. * Properly accounts for product run off and handles this product; accordingly, sorts through and reworks all good product * Keeps machines and work areas clean, wipes packaging machines off and blows down area when required to do so. * Immediately reports any maintenance problems to appropriate technician and/or supervisor. * Practices and adheres to appropriate safety and hygiene guidelines/procedures for safe housekeeping and personal protection. * Stores supplies in designated areas. * Keeps work area aisles/exits clear and free from obstruction; removes trash from work area floor. * Follows instructions for safe lifting/carrying of various sizes, shapes, and weights; identifies/reports issues with equipment; reports all job-related injuries to supervision. * May provide leadership and direction to packers. * May be qualified to perform as Back-up Packaging Coordinator, or other technical/skilled position. * If applicable, may monitor and replenish seasoning on overhead to ensure proper seasoning coverage on product. * Mandatory overtime may be required. * May perform other duties as required. QUALIFICATIONS FOR THE JOB Education: High School Diploma or GED is preferred, but not required. Experience: 1-year production experience in a manufacturing environment is preferred, but not required. PHYSCIAL REQUIREMENTS Sitting: Seldom Driving: Seldom Standing: Continuously Walking: Frequently Using hands: Continuously Climbing: Occasionally Squatting/Kneeling: Frequently Talking/Hearing: Continuously Two Handed Carry: Frequently Reaching: Continuously Pushing: Continuously Pulling: Continuously Overhead Work Standing: Frequently Ladder Climbing: Occasionally Repetitive Twisting Standing: Frequently Fine motor Skills/Manipulation: Continuously Bending: Continuously Vison (Far, Near, Peripheral, and Depth Perception): Continuously Follow Directions and Routines: Frequently Concentrate, Memorize, and Recall: Frequently Analyze Data: Occasionally Problem Solving: Frequently Work Independently with Appropriate Judgment: Frequently Read, Write, Comprehend Numbers and Words: Frequently Lift/Carry/Push Weight: Up to 10 lbs.: Continuously Up to 25 lbs.: Frequently Up to 50 lbs.: Frequently Up to 100 lbs.: Occasionally (must be with assistance) More than 100 lbs.: Seldom (must be with assistance) WORK ENVIRONMENT While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to wet and/or humid conditions. The employee is occasionally exposed to high, precarious places; fumes or airborne particles; and caustic chemicals. The noise level in the work environment is usually loud. COMPENSATION AND BENEFITS: The starting rate for this full-time, hourly position is $22.50 Individual base pay depends on work location and additional factors such as experience, job-related skills, and relevant education or training. Total pay may include other forms of compensation. In addition, we offer competitive health, dental, 401k and wellness benefits beginning on the first day of employment. Please ask your Talent Acquisition Partner for more information about our total rewards package. The Company is committed to providing equal opportunity for employees and qualified applicants in all aspects of the employment relationship, including consideration for employment, without regard to race, color, sex, sexual orientation, gender identity, national origin, citizenship, marital status, protected veteran status, disability, age, religion, or any other classification protected by law.

Are you a problem-solver who can think on your feet? Do you like working with your hands and putting things together? Construction Experience at plus. If so, then a career at FASTSIGNS may be for you. As an Installer/Production Specialist, You will play an essential role in sign assembly with team members, including preparing substrates and using the proper machines and techniques to construct the products. You'll use a variety of tools to assemble, erect and hang items, both inside and out. Fear of heights is not in your vocabulary. In fact, most of your days will be spent moving, lifting, and building for a wide variety of sign installations. FASTSIGNS is a well-known and respected global brand. We help businesses and organizations visually communicate. Virtually every business in every industry needs and uses signs, so you will get to see your work around town. You'll be in a fast-paced environment with a collaborative and supportive team. Every day is challenging and different, and you'll have the opportunity to continue to hone your skills by accessing a wide range of hands-on, in-person, and online training programs. When you work at an independently owned and operated FASTSIGNS location, you are working for a local business, typically with Monday through Friday business hours. Are you ready to bring your mechanical and construction skills on board and join an established brand? Compensation: $20.00 - $25.00 per hour

All America Threaded Products has several opportunities available for a Machine Operator! The pay range for this position is $20.00 - $25.00 per hour + Bonus Incentives ($200-$500 per month) and is eligible for our full benefits Package, including health, dental, life, and 401k. The Workweek for this position Full-Time working 4, 10-hour days, Monday - Thursday from 6:00am - 4:30pm. This position will work on-site at our facility in Lancaster, PA. Mechanically inclined individuals willing to learn how to run machinery will be considered for this opportunity. We are willing to train someone to run various types of machinery if they are willing to learn and have good mechanical aptitude. Pay Range: $20.00 - $25.00 per hour (Starting range $20-$22) Shift Available: Monday - Thursday from 6:00am - 4:30pm (occasional overtime as required) Bonus Incentives: $200-$500 per month Benefits: Medical, dental, vision, short term and long-term disability, 401(k), and paid holidays and vacation. Job Duties and Responsibilities: All America Threaded Products is a leading manufacturer of threaded products, and due to our continued growth, we are currently seeking new machine operators. Our Production Assistants work with a variety of heavy manufacturing equipment producing threaded rod and U-bolts. Other responsibilities include: Adherence with our safety regulations. Documenting quality issues, reporting deviations. Material handling, loading, and unloading of machines. Basic maintenance including adjusting, lubrication, and set-up. Performing quality checks on finished products. Setting and operating industrial machines. Who we are seeking in an applicant: We are willing to train someone to run various types of machinery if they are willing to learn and have good mechanical aptitude. Other qualifications include: Ability to work independently and make sound decisions. Proficient using gauges, tape measures, and other basic hand tools. Familiarity with and willingness to adhere to warehouse and manufacturing safety standards. Ability to lift up to 75 lbs. and interact in a physically demanding position. Willingness to spend most of the day on your feet. What we value most of all is a good attitude and punctuality. Who we are: In June of 2010, Acme formed All America Threaded Products (AATP) by combining the operations of five acquisitions made in the threaded products industry. AATP manufactures and distributes a wide variety of threaded products including threaded rod, studs, anchor bolts, U-bolts and specials. AATP has custom product manufacturing capabilities to meet specific needs for various applications in numerous industries. With a large in-stock inventory of a variety of materials and finishes, AATP has the ability to deliver the necessary threaded products for any application. AATP offers flexible business solutions providing value to our customers. In-house capabilities, such as cutting, finishing, plating, drawing, bending, welding and packaging, have been developed to support our customers' needs. Services such as custom packaging, flexible stocking options, in-stock inventory and fast and convenient shipping make working with AATP a great experience.

Are you a hard working individual who likes to assemble and create and is looking for steady employment? Look no further; Carel USA is looking for production workers for both 1st and 2nd shifts. Assembly work in Electronics and Mechanics departments - assemble components, controls, panels and dampers for HVAC, Refrigeration and Humidification industry. Be part of the climate control industry in a clean and safe environment. We create products that deliver energy savings and minimize environmental impact through the use of advanced technologies and tailored services! 1st and 2nd shift opportunities Good wages and benefits. Current openings in our Mechanics department CAREL USA, Inc. is an innovative, high-tech company that offers professional development and skills enhancement opportunities, both nationally and internationally working for CAREL means taking an active role in building the company's success, and enjoying a professional experience that involves developing a spirit of initiative, a sense of responsibility and an aptitude to work within multicultural and change-oriented environment. About CAREL: Founded in 1973, CAREL is a world leader in control solutions for air-conditioning, refrigeration and heating, and systems for humidification and evaporative cooling. We design our products to bring energy savings and reduce the environmental impact of machinery and systems. Our solutions are used in commercial, industrial and residential applications. Specifically, we have operations in the Americas (North, Central, and South), Asia Pacific, Africa and Europe; we have 18 fully-owned subsidiaries and 7 production sites, in addition to partners and distributors in a further 75 countries. Our mission of high-efficiency solutions summarizes the model that CAREL has adopted, both the starting point and the final objective that enclose the entire process, from conception to production and marketing of our systems. Research, innovation, and technology are the keys to our success: for more than forty years, customer needs have been at the center of our design work, so as to offer elements of differentiation in terms of both functions and appearance. Carel offers great medical, dental, and vision, and life insurance benefits, vacation, sick and personal time, along with a 401k plan. Find out more about us: **************** Job Summaries Dampers - Utilizes hand tools such as a drill, pneumatic drivers, rivet gun, caulk gun, wrenches, and other tools to assemble a wide range of louvered and damper products to specifications. Warehouse - Creates a customer focus by accurately performing all warehousing duties assigned (pick/pack, ship, receive, and replenish) based on training/certification levels. Electronics - Responsible for the assembly and testing of a variety of products in the Electronics Department according to company standards using hand tools and some electronic or pneumatic tools.

RHI Magnesita is the global leading supplier of high-grade refractory products, systems, and services. With more than 14,000 valued employees across more than 40 countries and 3.1 billion in revenues, we are the driving force of the refractory industry.RHI Magnesita is the global leading supplier of high-grade refractory products, systems, and services. With more than 14,000 valued employees across more than 40 countries and 3.1 billion in revenues, we are the driving force of the refractory industry. Summary Description: Positions in this sub job family are responsible for managing or performing work associated with converting raw materials and components into finished goods including: * General production manufacturing work; * Assembling finished components or parts into finished products; * Process manufacturing batches of bulk materials/ingredients including mechanical processing (e.g., mixing, grinding, separating, filtering, etc.) and chemical processing (altering the chemical properties of materials through chemical reactions and changing temperature, pressure, etc.); * Setting up and operating machine tools to convert materials into parts, sub-assemblies, and assemblies; * Surface finishing of parts, components, and assembled items including washing/painting/plating/anti-corrosion coating, hardening, polishing/engraving/etching, etc.; * Packaging materials or finished goods into containers for the purpose of protection, displa, and handling. Education: Vocational Education Relevant Experience: Required little or no prior experience Typical Duties and Responsibilities: Entry-level positions typically requiring basic knowledge of procedures and tools.Main responsibilities/proficiency required: * Work is routine or follows standard procedures. • Work is closely supervised. * Communicates information that requires little explanation or interpretation. Typical Impact: Limited - contribution is mainly supportive in nature and has little effect on overall achievement of results. Disclaimer:The information contained herein is not intended to be an all-inclusive list of the duties, skills and responsibilities of the job. May be required to perform other related duties as assigned. Nearest Major Market: York PA Nearest Secondary Market: Lancaster

Company Statement Graham Packaging is a people, planet and values-based company and a leader in sustainable packaging manufacturing. From the kitchen to the laundry room, Graham Packaging is part of your everyday life. For employees at Graham, our Blue Culture is part of their everyday lives, too. In other words, Blue is how we do things here. At Graham, we are united by a clear vision. We know our part and help those around us know theirs, encouraging one another to continuously improve. We create a safe, challenging environment to innovate by supporting creative ideas and new ways of thinking. We take the initiative to cultivate our individual growth and help others do the same, while keeping ourselves and one another accountable. And we actively promote cooperation, collaboration, integrity and respect across regions and teams to foster an engaged, diverse and connected workforce. We value our employees, and a Blue Culture allows for the most rewarding employee experience as part of the Graham family. Blue is how we feel about what we do-together-to create a better tomorrow. Working at Graham means you lead constructively with clear goals, use diverse thinking to drive excellence, accountability, innovation, as well as demonstrating collaboration, embracing learning, and taking action for continuous improvement and growth. Overview Graham Packaging Company is looking for a Machine Operator based in York, PA. This position is a day shift position 7am-7pm on a 2/2/3 rotating schedule (working every other weekend). Weekly pay starting at $23.37 per hour. Benefits (medical, dental, vision, and 401k with match) effective on day one! The Operator is responsible for operating a given number of plastic blow molding machines (including in-line equipment), and makes necessary adjustments or minor repairs to ensure production of containers is made in a safe, efficient and high quality manner. The primary duties of an Operator include: Understands, follows and enforces all established safety, health, quality GMP and Company policies, procedures and recognized practices. Understands, follows and enforces all established policies, procedures and recognized practices. Participate in continuous quality improvement projects and other related activities as assigned Operate a group of plastic blow molding machines and auxiliary equipment producing a container in a safe and high quality method. Participate in continuous quality improvement projects and other related activities as assigned. Perform and/or assists in mold, insert and color changes on the line. Perform basic processing of injection and/or blow molding machines to improve machine efficiency and reduce scrap. Perform tasks and responsibilities of any Utility position during slow periods and/or as needed. Monitor HDPE/PET resin (if applicable), dryer, material handling and color systems for appropriate processing conditions. Make frequent on time quality checks on products being produced from established quality standards. Assist other Operators and maintenance personnel on mechanical repairs. Perform assigned preventative maintenance work. Maintain work area to acceptable safety and housekeeping standards. Complete and file all required documentation in an orderly and timely manner. Communicate with the Production Shift Supervisor to coordinate production line support staff in accomplishing the lines' objectives. Verify material usage per standards Perform minor troubleshooting and programming on the line. Notify leads and supervisors of any major problems or questions. Operate equipment to minimize the generation and maximize the consumption of regrind, purge and scrap within customer specifications where applicable. Properly identify regrind and chunk produced. Communicate processing information to designated personnel on incoming shift. Assist other Operators as needed. Assist in the training of new Operators. Limited travel may be required. Qualifications A minimum of 2 years in manufacturing required. Operators are required to interact with managers, employees, vendors, and customers. Therefore, the following skills and proficiencies are also essential requirements of the position: Ability to maintain regular, predictable, and punctual attendance. Computer usage and typing skills are essential. Excellent verbal and written communication, including the ability to effectively communicate with internal and external customers. Must be able to work under pressure and meet deadlines, while maintaining a positive attitude and providing exemplary customer service. Ability to work independently and to carry out assignments to completion within parameters of instructions given, prescribed routines, and standard accepted practices. Communicates effectively: conveys facts and information clearly both verbally and orally. Collaborates well with others: proactively contributes to group objectives; volunteers to help others. Compensation Statement The expected salary range for the position described in this posting is made in accordance with the legal mandates of certain jurisdictions within the United States. The final agreed-upon compensation is based on individual qualifications and experience. Benefits Statement Benefits include medical, dental, vision and basic life insurance. Employees are able to enroll in the company's 401K Employee Saving Plan and may participate in its Employee Wellness Program. Employees will also receive paid time off in accordance with company policy and state law requirements. EEO Disclaimer Graham Packaging is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex (including pregnancy), sexual orientation, religion, creed, age, national origin, physical or mental disability, gender identity and/or expression, marital status, veteran status or other characteristics protected by law.

**Company Statement** Graham Packaging is a people, planet and values-based company and a leader in sustainable packaging manufacturing. From the kitchen to the laundry room, Graham Packaging is part of your everyday life. For employees at Graham, our Blue Culture is part of their everyday lives, too. In other words, Blue is how we do things here. At Graham, we are united by a clear vision. We know our part and help those around us know theirs, encouraging one another to continuously improve. We create a safe, challenging environment to innovate by supporting creative ideas and new ways of thinking. We take the initiative to cultivate our individual growth and help others do the same, while keeping ourselves and one another accountable. And we actively promote cooperation, collaboration, integrity and respect across regions and teams to foster an engaged, diverse and connected workforce. We value our employees, and a Blue Culture allows for the most rewarding employee experience as part of the Graham family. Blue is how we feel about what we do-together-to create a better tomorrow. Working at Graham means you lead constructively with clear goals, use diverse thinking to drive excellence, accountability, innovation, as well as demonstrating collaboration, embracing learning, and taking action for continuous improvement and growth. **Overview** **Graham Packaging Company is looking for a Machine Operator based in York, PA. This position is a day shift position 7am-7pm on a 2/2/3 rotating schedule (working every other weekend).** + **Weekly pay starting at $23.37 per hour.** + **Benefits (medical, dental, vision, and 401k with match) effective on day one!** The Operator is responsible for operating a given number of plastic blow molding machines (including in-line equipment), and makes necessary adjustments or minor repairs to ensure production of containers is made in a safe, efficient and high quality manner. The primary duties of an Operator include: + Understands, follows and enforces all established safety, health, quality GMP and Company policies, procedures and recognized practices. + Understands, follows and enforces all established policies, procedures and recognized practices. + Participate in continuous quality improvement projects and other related activities as assigned + Operate a group of plastic blow molding machines and auxiliary equipment producing a container in a safe and high quality method. + Participate in continuous quality improvement projects and other related activities as assigned. + Perform and/or assists in mold, insert and color changes on the line. + Perform basic processing of injection and/or blow molding machines to improve machine efficiency and reduce scrap. + Perform tasks and responsibilities of any Utility position during slow periods and/or as needed. + Monitor HDPE/PET resin (if applicable), dryer, material handling and color systems for appropriate processing conditions. + Make frequent on time quality checks on products being produced from established quality standards. + Assist other Operators and maintenance personnel on mechanical repairs. + Perform assigned preventative maintenance work. + Maintain work area to acceptable safety and housekeeping standards. + Complete and file all required documentation in an orderly and timely manner. + Communicate with the Production Shift Supervisor to coordinate production line support staff in accomplishing the lines' objectives. + Verify material usage per standards + Perform minor troubleshooting and programming on the line. Notify leads and supervisors of any major problems or questions. + Operate equipment to minimize the generation and maximize the consumption of regrind, purge and scrap within customer specifications where applicable. + Properly identify regrind and chunk produced. + Communicate processing information to designated personnel on incoming shift. Assist other Operators as needed. + Assist in the training of new Operators. + Limited travel may be required. **Qualifications** A minimum of 2 years in manufacturing required. Operators are required to interact with managers, employees, vendors, and customers. Therefore, the following skills and proficiencies are also essential requirements of the position: + Ability to maintain regular, predictable, and punctual attendance. + Computer usage and typing skills are essential. + Excellent verbal and written communication, including the ability to effectively communicate with internal and external customers. + Must be able to work under pressure and meet deadlines, while maintaining a positive attitude and providing exemplary customer service. + Ability to work independently and to carry out assignments to completion within parameters of instructions given, prescribed routines, and standard accepted practices. + Communicates effectively: conveys facts and information clearly both verbally and orally. + Collaborates well with others: proactively contributes to group objectives; volunteers to help others. **Compensation Statement** The expected salary range for the position described in this posting is made in accordance with the legal mandates of certain jurisdictions within the United States. The final agreed-upon compensation is based on individual qualifications and experience. **Benefits Statement** Benefits include medical, dental, vision and basic life insurance. Employees are able to enroll in the company's 401K Employee Saving Plan and may participate in its Employee Wellness Program. Employees will also receive paid time off in accordance with company policy and state law requirements. **EEO Disclaimer** Graham Packaging is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex (including pregnancy), sexual orientation, religion, creed, age, national origin, physical or mental disability, gender identity and/or expression, marital status, veteran status or other characteristics protected by law. **ID** _2025-7696_ **Category** _Manufacturing Operations_ **Type** _Full-Time_ We believe in equal opportunity for all job candidates, and we do not discriminate on the basis of race, creed, color, ethnicity, national origin, religion, sex, sexual orientation, gender expression, age, physical or mental ability, veteran status, military obligations or marital status. Download these flyers to learn more about our company's policies, including our participation in E-Verify.

You have a choice of where you want to work! We invite you along on our journey to Purify and Protect, with Every Fiber, for a Sustainable World. We aim to attract, retain, and energize passionate people, like you, by investing in your professional development and providing opportunities for personal growth. Do your values align with ours? Accountability, Growth mindset, One team, Care and a fair and inclusive work environment for everyone, everywhere! We strive to meet the highest standards of corporate citizenship by protecting the health and safety of our team, safeguarding the environment, and creating a long-lasting, positive impact on the communities where we do business. Are you with us?!? Ahlstrom is now seeking candidates for an entry-level General Laborer opportunity at our unionized paper mill in Mount Holly Springs, Pennsylvania. Mt. Holly Springs is within reasonable travel from Carlisle, Harrisburg, Shippensburg and other neighboring communities. Nearby attractions include Hershey Park, the Gettysburg National Military Park, the Smithsonian National Air and Space Museum, and a number of historical landmarks. Ahlstrom is a leading global manufacturer of sustainable, specialty paper products. As a General Laborer on our Service Team, you will provide coverage to all departments and shifts. You will not work a set schedule. Instead, your schedule is assigned by your supervisor on a week-by-week basis. Therefore, candidates for the General Laborer position must have the availability to work any shift within any department. As a General Laborer, you will earn $21.17/hour to start. Then, after a 70-day training period, you will join the union, become eligable for benefits, and earn $21.70/hour when working as a general laborer or up to $25.31/hour depending on the job you are filling in for. We offer: $21.17/hour to start, then from $21.70 - $25.31/hour once fully certified Excellent benefits including medical, dental, and vision insurance (eligable on your 71st day of employment) 401(k) with company match Perfect Attendance Bonus Holiday Bonus Shift differentials for 2nd and 3rd shifts The Essential Functions and Primary Responsibilities of this role include: Use proper protective equipment as needed and directed, follow all safety rules and regulations and actively work through continuous improvements to improve safety. Maintain quality and focus on continuous quality improvements. Meet productivity targets and focus on productivity improvements. Ability to train, learn and operate in multiple areas of the plant Perform roll packaging to prepare order for shipment as required Perform other miscellaneous duties as directed by Supervisor. Perform minor maintenance when required. Must successfully complete any required training program. Performs other related duties as assigned. Minimum Occupational Requirements: Hight School Diploma or GED equivalent required Willing and available to work any shift, including rotating shifts and weekends Prior manufacturing experience preferred, but training is available Must pass non-D.O.T. physical and other screenings Must be willing to comply with OSHA's facial hair length and styles guidelines. Must have a valid driver's license and own personal reliable vehicle to travel to and from work and between buildings. Ability to read, write, use simple math and read a ruler. Dedication to safety and quality; operate equipment accurately and properly Physical Occupational Requirements: Must pass post-offer drug screenings and physical Frequent lifting and/or carrying of objects weighing up to 50 lbs Ability to stand and walk for long periods of time Work at heights and near rapidly moving machinery Operate lift-truck and hoists Work in a hot and humid environment Ahlstrom is an Equal Opportunity Employer. Equal opportunity is a sound and just concept to which we are firmly bound. Ahlstrom will not engage in discrimination against, or harassment of, any person employed or seeking employment with our company based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, non-disqualifying disability, status as a protected veteran or other characteristics protected by law. About Us. Ahlstrom is a global leader in combining fibers into sustainable specialty materials. Our purpose is to Purify and Protect, with Every Fiber, for a Sustainable World. Our vision is to be the Preferred Sustainable Specialty Materials Company for all our stakeholders. Our three divisions, Filtration and Life Sciences, Food and Consumer Packaging, and Protective Materials, address global trends with safe and sustainable solutions. Our net sales in 2023 amounted to EUR 3.0 billion and we employ some 7,000 people. Learn more at ****************

About Signify Through bold discovery and cutting-edge innovation, we lead an industry that is vital for the future of our planet: lighting. Through our leadership in connected lighting and the Internet of Things, we're breaking new ground in data analytics, AI, and smart solutions for homes, offices, cities, and beyond. At Signify, you can shape tomorrow by building on our incredible 125+ year legacy while working toward even bolder sustainability goals. Our culture of continuous learning, creativity, and commitment to diversity and inclusion empowers you to grow your skills and career. Join us, and together, we'll transform our industry, making a lasting difference for brighter lives and a better world. You light the way. More about the role This is an exciting job opportunity for you to light the way as a Production Worker-Pourer in New Oxford, PA with Signify. * Safely carry or push ladles of molten metal and pours metal into sand molds. * Charge and clean furnace safely to control the furnace and temperature levels * Moves sand, castings, flasks, or other materials about foundry * Skims slag from surface of molten metal More about you While we value and appreciate all applicants, we believe that the following experience and skills will be needed to shine brightly in this job opening: * High school diploma or GED preferred * Must have reliable transportation to and from work * Must have the ability to communicate clearly with supervisors and other foundry personnel * Must have the ability to use hand tools and larger mechanical machines in the casting process * Required to wear Personal Protective Equipment plus face shield, pouring jacket and pants, leather leggings and double gloves; Ability to stand during assigned shift Must be legally authorized to work in the United States without current or future sponsorship needs. Everything we'll do for you You can grow a lasting career here. We'll encourage you, support you, and challenge you. We'll help you learn and progress in a way that's right for you, with coaching and mentoring along the way. We'll listen to you too, because we see and value every one of our 30,000+ people. We believe that a diverse and inclusive workplace fosters creativity, innovation, and a full spectrum of bright ideas. With a global workforce representing 99 nationalities, we are dedicated to creating an inclusive environment where every voice is heard and valued, helping us all achieve more together. Rate - $20.00 an hour Hours - 5:00am to 3:30pm Monday to Thursday Benefits - Medical, Dental, 401K, paid time off Come join us, and together we can light the way.

At Ecore International, we transform reclaimed materials into performance surfaces that manage energy and improve people's lives. Why does it matter? Because we believe innovative surfaces have the power to help people in motion be their strongest, healthiest selves, and innovative businesses can help protect the planet we share. Location: 76 Acco Drive, York, PA 17402 We are looking for new Machine Operators. Reporting to our Production Supervisors, you will be a key part in making our high-performance upcycled rubber products. Shift: 3rd Shift (Sunday through Thursday) with occasional overtime Hours: 10:45 PM - 7:00 AM Pay Range: starting at $18.00/hour and up, based on experience Shift Differential: $0.75/hour We frequently fill other jobs by promoting our employees and hire externally from this job. Your application to this job can get you into several types of work: - Material Handler operating a forklift while organizing and moving material around - Reroller Operator operating a machine that winds and cuts rolls of flooring - Demolder operating overhead cranes to remove flooring material from large molds - Roto Grinder operating a machine that grinds tires into small crumbs - Peeler Operator operating a machine that peels off layers of flooring from the molded flooring material - Die Cutter operating a machine that cuts shapes out of flooring Core Contributions: Prioritize your personal safety and the safety of your teammates. You are empowered to act and stop work if you see something unsafe. You will start each shift with a team huddle and stretching. Set-up your machine at the start of each shift. Work with the materials and machines, following standard procedures. Take manual measurements to ensure high quality. Participate in regular training and cross-train others. Essential Experiences: High school diploma, GED, or 4+ years of experience Must be able to lift 50-70 lbs. depending on your area Need to have flexibility to work overtime as needed What we offer you: Competitive medical, dental, vision, and prescription insurance coverage 401k with a company match Earn PTO hours immediately Tuition reimbursement Opportunities for development 2-minute walk to eco-friendly public transportation from rabbittransit Ecore International is an equal opportunity employer (Minorities/Females/Disabled/Veterans). We recruit, employ, train, compensate, and promote without regard to race, religion, creed, color, national origin, age, gender, sexual orientation, marital status, disability, veteran status, or any other basis protected by applicable federal, state or local law. NOTICE TO PROSPECTIVE APPLICANTS Ecore International and its subsidiaries participate in the E-Verify program. Federal law requires all employers to verify the identity and employment eligibility of all persons hired to work in the United States. This employer will provide the Social Security Administration (SSA) and/or the Department of Homeland Security (DHS) with information from each new employee's Form I-9 to confirm work authorization. If, after an applicant has been extended and accepted an offer of employment, the Government cannot confirm that you are authorized to work, this employer is required to provide you written instructions and an opportunity to contact SSA and/or DHS before taking adverse action against you, including withdrawal of the offer of employment or terminating your employment. Employers may not use E-Verify to pre-screen job applicants or to re-verify current employees and may not limit or influence the choice of documents presented for use on the Form I-9. In order to determine whether Form I-9 documentation is valid, this employer may use E-Verify's photo screening tool to match the photograph appearing on some permanent resident and employment authorization cards with the official U.S. Citizenship and Immigration Services' (USCIS) photograph. Other details Job Function Direct Pay Type Hourly Min Hiring Rate $18.50 Travel Required No Travel % 0 Telecommute % 0 Required Education High School

Machine Operator Pay: $19-21/hr. 2nd Shift: Mon-Fri (3pm to 11pm) Requirements: Mechanically inclined and ability to read a tape measure to 1/16" Experience in a manufacturing or warehouse environment Ability to lift up to 100 pounds with assistance of a hoist; up to 50 pounds without assistance Ability to stand, walk, bend, twist, and use hands Computer operation skill: Moderate Job Details: Operate slitter efficiently and productively against set goals. Loading and unloading of rolls on slitter. Interpret and understand written information, (orders, SOP's, Lam. and print roll tickets etc.) Palletization, (building pallets of finished goods per customer specifications) Bagging of finished rolls. Quality checks slit material Lay flat/measurement of slit web Print quality/print defects Roll/web tension and integrity Enter accurate information into computer and on production forms. Print out and attach accurate labels to finished rolls. Keep machine and surrounding area safe and clean. Spot and determine visual defects. Cut out defects and splice together good material. Complete tasks in adequate time limits, as to meet press daily goal and schedule needs. SOP's may cover the area of (but are not limited to): Employee Health & Safety SQF (Safe Quality Food packager) and GMP (good manufacturing procedures) focused on eliminating contaminates in all packaging manufactured Benefits: Medical, dental, vision, and prescription drug coverage 401(k) plan with generous company match Bonus program Paid vacation and personal days Paid holidays Company-paid life and AD&D insurance Company paid short-term disability coverage Employee Assistance Program (EAP)

Woodstream has a rich history of over 150 years, and we are an essential, life sustaining business. We provide pest & animal control products that destroy disease carrying insects & rodents. We provide a safe work environment including screening, social distancing, and sanitation processes. We have an immediate opportunity for a Machine Operator on 3rd shift in Lititz. Pay Rates starting at $21.50/hr plus $1.60/hr shift differential Our Benefits Are Exceptional and Include: Exceptional Health, Dental and Vision Insurance effective Day One of Hire Access to free Penn Medicine Health Clinic Monthly Attendance Bonus Employee Bonus Program Competitive 401K Match Paid Basic, Life and Disability Insurance Accident, Critical Illness, & Hospital Insurance Options ID Theft & Legal Assistance Plan Options Parental Leave and Adoption Assistance Paid Vacation and Holidays On-Site Technical Training Center Career Advancement Opportunities Exceptional Work-Life balance JOB RESPONSIBILITIES INCLUDE: A PRO A is responsible for safety, quality and throughput and is capable of optimizing equipment in various work centers. A PRO A will participate as a team in solving problems and implementing solutions to increase Woodstream's productivity. A PRO A is part of the production team. Their success will be determined by the positive way in which they communicate, cooperate, interact, and contribute towards achieving work center goals and objectives. Produce consistently, parts and/or product that meets the specified quality requirements. Proficient in use of gages and tools required to monitor quality. Perform adjustments of a minor, frequent or repetitious nature, as defined by the work center's task list and process documentation. Maintain and support continuous operations in accordance with work center schedules. Maximize machine efficiency and throughput, and when appropriate, seek assistance for equipment failure. Interact with others towards accomplishment of team goals/objectives Provide quality cross training and support to co-workers as needed. Integrate temporary employees into duties as required. Participate in identifying problems, suggest improvements and participate where appropriate in implementation of solutions. Operate in a safe manner and comply with safety policies and procedures at all times Maintain work area in a neat and orderly way, during and at end of shift. Record and maintain any data related to work activity in a concise, accurate way, and communicate appropriately. Will assist in operations in any which way deemed essential to meet production requirements. EDUCATION/EXPERIENCE/OTHER SKILLS: Use of micrometer OR hand caliper Basic mathematical skills Basic problem solving skills Basic mechanical aptitude High School Diploma/GED required or 1-2 years experience in a mechanical trade Skilled in interpreting electrical schematics and translating that knowledge into physical circuitry. Works in a safe manner and insures the safety of others by sharing safety knowledge and practices. Self-motivated. Able to work effectively with little direct supervision. Woodstream is an Equal Employ Opportunity employer committed to recruit, hire, train and promote without regard to race, color, religion, creed, age, sex, national origin, marital status, union affiliation, disability, sexual orientation, or any other legally protected characteristic.

Our Story: Hood Container Corporation is a family-owned, mill to market company specializing in containerboard and kraft paper, corrugated boxes, high graphic displays and contract packaging. Our commitment to customer happiness, employee well-being, environmental stewardship, and operational excellence drive our business. Over the last eight years Hood Container Corporation has grown to become one of the top ten Paper and Packaging Companies in the United States. Our integrated company resources allow for a unique dynamic that evolves with every addition to our geographic footprint. We excel at offering the benefits of a large corporation, while operating as a boutique business building close relationships with our customers. Our Mission: Through our unwavering commitment to safety, innovation, and sustainability, we passionately deliver indispensable value to our customers, employees, suppliers, communities, and stakeholders. Our goal is to be a diverse workforce that is representative, at all job levels, of the citizens and customers we serve. We are committed to building a team that represents a variety of backgrounds, perspectives, and skills. The more inclusive we are, the better our work will be. Requirements: Responsible for the set-up and operation of the Bobst Die Cutter in an orderly, accurate and efficient manner. Operator will assist in training and interaction of crews, confer with pre-press department regarding conditions of supplies, check ink color to meet customer specifications. Responsible for a quality product properly printed and/or die cut according to customer specifications in a safe and proper manner. Must be able to perform preventative maintenance, inform of breakdowns, constantly monitor quality of product as per accepted standards as set by the company. Must be able to accurately report production in computer, to read and understand all orders, spec cards and print cards, must be able to read and understand a tape measure, stop watch, micrometer, Ph meter and viscometer, to use and understand a spectrophotometer. Must be able to stand on a continuous basis for an extended period of time. Must be able to lift up to 50 lbs on a continuous basis for an extended period of time. Perform all other duties as required by supervisor and must be willing to work overtime as needed.

15 Lightner Road, York, Pennsylvania 17404 Work Shift: 12hr-C Shift (United States of America) The Machine Operator will operate blow-mold/PET/injection molding machines, grinders, trimmer machines, and conveyor systems. Role is responsible for troubleshooting process problems and performing minor maintenance to ensure continued operation of the production line. The Machine Operator is also responsible for following our company's Good Manufacturing Practices. Responsibilities include, but are not limited to the following: * Demonstrates safe work practices by wearing correct PPE and following safety policies * Demonstrates punctuality and adheres to work schedule. * Demonstrates a One Team Cross Functional attitude by working well and effectively with others * Embraces and participates in continuous improvement processes to drive change within the plant. * Adheres to company General Manufacturing Policies * Ensure compliance with corporate and plant safety standards and with applicable laws and regulations issued by regulatory agencies. * Keeps the work area clutter free, clean, and organized. * Introduction to preventive maintenance, mold, neck and blow pin and other mechanical changes. * Operate blow-mold/PET/injection molding machines (including wheels, reciprocating or shuttle machines) to ensure production of quality bottles. * Adhere to quality control and to blow mold process procedure. * Introduction to troubleshooting and resolving process problems. * Performs bottle inspections, such as drop tests for designated lines. * Inspects the quality of bottles during production, packaging and labeling. * Perform audits, weights and quality checks. Machines may vary by site. * Make adjustments to meet product specifications. * Troubleshoot and perform minor repair on blow-mold and support equipment. * Immediately escalates all bottle abnormalities, defects and quality issues when found. * Monitor supply levels of packaging materials and replenish as needed. * Pick up dropped bottles, place into bins and if needed into grinder. * Ensure correct labeling, bottle description and packaging of product in accordance with specific customer requirements. * Move finished goods to designated area. * Prepare & document daily production reports, including rejects, regrinds, line efficiencies and other. * Prepare maintenance request forms and document equipment repairs. * Receives instructions on specific job task by Lead Operator or Supervisor. Assistance is furnished on unusual problems and work is reviewed for application of sound professional judgment. * Other duties as assigned by management. * Duties may differentiate by plant based on equipment and plant design. QUALIFICATIONS: The requirements listed below are minimum requirements for the job. Reasonable accommodation may be made to enable individuals with disabilities who are otherwise qualified to safely perform the essential functions of the job, unless such accommodation would impose an undue hardship on the Company. EXPERIENCE: * Basic mathematical skills are required. * Basic computer experience. * Blow mold experience. EDUCATION: * Prefer High School diploma or general education degree (GED). TRAINING: * Completion of Altium Production/Machine Operator training within 90 days of hire date. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities who are otherwise qualified to safely perform the essential functions of the job unless such accommodation would impose an undue hardship on the Company. While performing the employee is frequently required to stand; walk; use hands to grasp, handle, or feel; reach out, over and below with hands and arms. The employee is occasionally required to climb, balance, stoop, kneel, crouch, and or crawl. The employee frequently is required to lift, push, pull, and/or move up to 50 pounds. WORK ENVIRONMENT: While performing the duties of this job, the employee is regularly exposed to moving mechanical parts in a production environment. The noise level in the work environment is usually loud. Temperatures inside the plant can fluctuate between hot and cold according to seasonal changes. Personal protective equipment (PPE) is required in the production department and other designated areas. Altium Packaging, Our Culture Differentiates Us! We incorporate our Guiding Principles into all aspects and at all levels of the organization and use them as a framework for decision-making. We believe our Guiding Principles foster a culture of excellence that benefits both employees and customers. Our Guiding Principles * Act with Integrity & in Compliance * Drive Value Creation * Be Disciplined Entrepreneurs * Focus on the Customer * Act with Humility * Treat others with Dignity and Respect * Seeking Fulfillment in your Work We Believe in Rewarding our Most Important Resource - Our People! We show our commitment to Total Rewards by providing a competitive, comprehensive benefits package. In addition to medical, dental and vision plans, company holidays and vacation days, tuition reimbursement, learning and training opportunities, bonus potential, and a 401(k) plan with company contributions, Altium Packaging locations offer rewards and recognition programs and opportunities to make a difference in the community. EEO Statement We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class. Take your career to the next level at Altium Packaging!

Custom Engraving Studio is experiencing incredible growth and looking for people who want to get in on the ground floor and learn about our different technologies and grow with the company. Work in our warehouse to setup and operate machines that use cutting-edge laser technology to engrave a large variety of products. Responsibilities Operate machines that use different types of technology for engraving Work with the production team to ensure quality on all jobs Get necessary products ready to be fed into the machines Pull products needed for a job from inventory in the warehouse Prepare products and get them ready for production Work as a machine operator to complete all jobs Monitor the machines as they operate and troubleshoot the machines as needed Pull of finished product and package it as needed to prepare for shipping Work with the team to clean up and keep the warehouse organized Skills and proficiencies Experience in a manufacturing or production environment preferred Analytical skills Attention to detail Teamwork