Production operator jobs in Bowie, MD

The TSUBAKI name is synonymous with excellence in quality, dependability, and customer service. U.S. Tsubaki is a leading manufacturer and supplier of power transmission and motion control products. As a part of a vast, international network of corporate and industrial resources, Tsubaki offers its customers the finest state-of-the-art products available in the world and we strive to be the “Best Value” supplier in the industry. Essential Duties and Responsibilities: Operate a wide range of machinery to fabricate, process, and assemble chain and other operations associated to ensure that all processes are maintained and run to the high levels of efficiency and quality stipulated by US Tsubaki standards. Primarily responsible for the operation of a complete range of: grinders, drilling machines, ballizers, semi-automatic equipment, power presses, and packaging equipment, or other operations associated with the fabrication, processing, or assembly of pins, bushings, rolls, side plates, attachments, and all other chain related components. No set-up skills are required. Able to measure all quality parameters of assembled and unassembled chain components and determine corrective action where appropriate to the processes concerned. Retrieve and replace components from parts storage or prior processes to ensure continuous operation of equipment. Requirements: Must have the ability to learn to operate simple production equipment with minimal amount of instruction. Basic numeric and writing skills are essential. High level of dexterity and flexible nature essential. Requires sufficient knowledge of all types of production equipment for example: grinders, drilling machines, ballizers, automatic equipment, semi-automatic equipment, power presses, greasing, and packaging equipment, and tooling required, to maintain close tolerances and work specifications. Self-motivated to take ownership of work schedule and quality. Continuous improvement: Willing to accept change to support being a Fast - Flexible - Efficient section. Must be a team player - capable of working with peers and supervisors both inside and outside the section in order to satisfy the needs of internal and external customers. Make decisions in order to perform a variety of tasks having timely constraints. Follow directions / instructions of group leader or supervisor. Able to work in any fabrication, processing, assembly, and warehouse section when and where needed. Capable of handling heavy weights. Tsubaki is an Equal Opportunity Employer - Minorities/Females/Veterans/Disability PM21 Compensation details: 20.54-23.65 Hourly Wage PIacbe56fd933d-30***********2

Production Operator I - III (Solid Dosage/OSD Manufacturing) Manufacturing Job Type: Full-time Shift Availability 1st Shift: 7:00 am - 3:30 pm EST 2nd Shift: 3:00 pm - 11:30 pm EST Training: Must be available for training from 8:30 am - 5:00 pm EST for one month. Job Summary The Production Operator is responsible for tasks associated with drug product processing, ensuring adherence to current Good Manufacturing Practices (cGMPs), customer specifications, and Standard Operating Procedures (SOPs). Tasks may vary in complexity, scope, and sequence, and the role requires recognizing issues to improve efficiency, throughput, and quality. Operators manage production schedules and contribute to troubleshooting process issues, ensuring safe, efficient operations. Key Responsibilities Production Operate pharmaceutical production machinery, following procedures for manufacturing activities such as weighing, blending, dispensing, mixing, granulating, drying, compressing, and encapsulating. Adhere to SOPs to ensure material purity and proper equipment usage. Verify materials against Product ID Labels, QC release tags, and Batch Production Records. Clean and perform machine changeovers, conduct in-process product quality checks, and document results accurately. Follow assigned schedules and participate in debriefs to address any production issues. Documentation Maintain accurate documentation of manufacturing processes in batch records, logbooks, and protocols. Complete and attach verification tickets, updating status boards as needed. Continuous Improvement Assist in troubleshooting, participate in improvement projects, and address deviations with the supervisor. Safety & Compliance Comply with all cGMP, SOP, policy, and safety requirements. Participate in safety meetings and maintain a clean, organized work area. Training Fulfill all training requirements, including machine-specific training. Teamwork & Collaboration Share knowledge with team members, contributing to the overall success of projects and initiatives. Requirements Trainee - Level I Operator: High school diploma, GED, or Associate Degree. 1-3 years of experience in a physically demanding environment. Proficiency in English (verbal and written). Level II Operator (OSD/Solid Dose Manufacturing Experience Required) High school diploma, GED, or Associate Degree. 3-7 years of experience in OSD pharmaceutical manufacturing. Forklift certification may be required for specific roles. Level III Operator (OSD/Solid Dose Manufacturing Experience Required) High school diploma, GED, or Associate Degree. 7+ years of pharmaceutical manufacturing experience, with relevant certification or demonstrated proficiency. Required Knowledge & Skills For Levels II & III Experience in solid dose manufacturing (OSD) and equipment operation. Proficiency in areas like Compression, Granulation, Encapsulation, Coating, etc. Familiarity with FDA regulations, GMP, Lean Manufacturing, and Six Sigma principles. Basic math, reading, and problem-solving skills. Ability to participate in Continuous Improvement projects. Physical Requirements Ability to stand for extended periods, lift at least 50 pounds, climb ladders, wear a respirator, and all required PPE (safety glasses, earplugs, safety shoes). Apply if you're eager to contribute to high-quality production in a regulated environment with opportunities for growth. Send us an email to ************************ and tell me why you're interested.

Entry Level & Highly Skilled Pharmaceutical Production/Manufacturing Operators The Manufacturing/Production Operator reports to the Production Manager and performs functions relating to the processing of drug products, ensuring product compliance to established current Good Manufacturing Practices (cGMPs), customer requirements and in conjunction with all Standard Operating Procedures (SOPs). Key Accountabilities: Operates pharmaceutical production machinery and follows the procedures for manufacturing such as weighing, blending, dispensing, mixing, pellet coating, granulating, drying, milling, blending, compressing, Encapsulating, Coating, potent compound, etc. Meets the requirements for use of manufacturing equipment and other commonly used equipment per SOPs. Executes written SOPs to ensure the purity of materials involved in the manufacturing process. Properly uses all scales, including printouts, zeroing, setting tares, and daily calibration verification per SOPs. Examines manufacturer Product ID Labels, Quality Control release tags, and Batch Production Record to verify issued/staged raw materials can be released for production. Cleans manufacturing equipment and facilities according to established SOPs. Executes machine changeovers from batch to batch. May sample batches for quality testing. Executes required in-process product quality checks and documents accurately. Understands and runs processes to meet the assigned schedule and standards/routers; when this is not achieved, participates in the debrief to understand the reasons why and what needs to be corrected moving forward. Required Skills & Abilities: Proficient in running machinery. Proficient in (Master Clean/Surface clean) equipment cleaning. Proficient in sampling batches. Proficient in doing basic set-ups. Ability to participate in Continuous Improvement projects. Qualified in any of the following manufacturing processes: Weighing Blending Granulation Compression Coating Encapsulation Potent Compound Experience & Education High School Diploma or equivalent experience Any production or retail store experience Knowledge of Good Manufacturing Practices (cGMP) Looking for Pharmaceutical Glatt, Compression and Pan coating experience Level II Operator: High School diploma, GED or College Associate Degree Minimum of 2-5 years of pharmaceutical manufacturing experience and certification in assigned area, as required or proficiency demonstrated in competencies as required. Forklift certification may be required for certain jobs. Level III Operator:HS Diploma, GED or College Associate Degree Minimum of 5+ years of pharmaceutical manufacturing experience and certification in assigned area, as required or proficiency demonstrated in competencies as required. Forklift certification may be required for certain jobs. Knowledge: Current Good Manufacturing Practices (cGMP) Food and Drug Administration (FDA) and other regulatory requirements Standard Operating Procedures for process rooms and manufacturing area GMP compliance in a regulated work environment Manufacturing processes and equipment procedures Physical Requirements: Must be able to stand for long periods of time (up to 12 hour shifts), maneuver at least 50 pounds, climb ladders, wear a respirator and pass associated respirator tests and/or requirements, and be able to wear all required PPE, including safety glasses, ear plugs, and safety shoes.

Baltimore Signsmiths, headquartered in Owings Mills, MD is seeking an experienced Sign Maker or Sign Production Associate with a sign production experience using large format printers and plotter/cutters to create custom signs and graphics. At Baltimore Signsmiths, you will be working with the latest generation of latex ink printers and software and the most advanced materials to make custom signs and graphics for a diverse base of clients. The right candidate for this role has sign and graphics production experience, is enthusiastic, and works with a sense of urgency and accuracy to deliver products on time. You will have a keen attention to detail and working knowledge of large format production, finishing and installation. This position is full-time Monday-Friday with occasional overtime. Pay will be commensurate with experience. About Us: Baltimore Signsmiths is a fast paced, growing sign, display and graphics company in Owings Mills, Maryland. We are an independently owned company and our business model is designed to provide exceptional service and outstanding quality to commercial clients, satisfying their sign and display needs. We offer a variety of graphics solutions including posters, banners, vehicle wraps, wall graphics, window graphics, monument signs, channel letters, trade show displays, and custom signage. Required Qualifications: 3+ years of experience working as a professional sign maker or display production associate with demonstrated skills in graphic design and product production, specifically vinyl application & installation. Experience with laminating, cutting, weeding, mounting, wall vinyl application & installation of commercial signage. Expertise in using Adobe Design tool suite (Photoshop, Illustrator, etc.) Experience with RIP software Experience and understanding of estimating and project management of signs Ideal Candidates will have professional experience and skills such as these: Signs and graphics installation of all types including but not limited to large vinyl and print graphics, post and panels, Monument signs Pylon signs, etc. Vehicle wrap installation Print color management (desired) Prior experience working with site surveys to get all required specifications for the full scope of work including but not limited to measurements and photos. General Skills: Reliable, presentable, detailed oriented with excellent customer service skills Adept at using hand and power tools such as hammer, drills, table & panel saws, jigsaws, various wall anchors and mounts, post concrete, grommet machine, corner rounders, levels, files, rulers, tall ladders, and aerial lifts/booms. Ability to safely climb ladders of varying heights. MUST be a self-motivated team player, and demonstrate a professional, upbeat, positive attitude. Demonstrate strong attention to detail and accuracy and organization skills. Must work well in a fast-paced environment and adapt quickly to changing situations and customer requests. Must be able to lift 50 lbs., work with power tools, and use ladder comfortably. Valid driver's license/clean driving record a must. Job Type: Full-time Pay: Commensurate with Experience Benefits: Flexible schedule 401K Plan Paid time off Schedule: Monday to Friday 40-hour week. Overtime - rarely but occasionally Education: High school or equivalent (Preferred)

Is attention to detail among your key strengths? Do you like getting things right and seeing a task through to completion? Can you see yourself playing an important role on a team dedicated to producing world-class quality electronic products? Our production team is a close-knit group of professionals who are upbeat, talented and extremely proud of their work and the cutting edge products they produce. We use state of the art Surface Mount Technology (SMT) & Inspection equipment to assemble our own high quality printed circuit cards. We are searching for an organized, detail-oriented, and friendly SMT Operator to join our production team and take pride in sending products to Test with minimal defects. Join us and become part of the future of computing technology! Essential Duties and Responsibilities Operate SMT equipment to place components according to IPC A 610 Class III standards and inspect using AOI machine Operate Screen printer to print solder on PCB and inspect using SPI machine Operate Convection Oven Inspect printing and component placement Hand place components before sending boards through the oven Maintain all documentation necessary as required by the process Perform necessary maintenance on SMT equipment Occasionally some overtime or working on the weekends may be required Requirements High School Diploma or equivalent U.S. Citizenship Hands on experience with assembling PCB's Hands on experience with a Pick and Place machine Ability to lift 20 lbs Attention to Detail Strong Oral and Written Communication Ability to effectively work in a team environment Able to adapt to change Desired Technical Background Bachelor's degree Experience in handling SMT components, boards, and tools for assembly Experience with Solder Printer to Oven and all additional equipment in between Experience following manufacturing documentation and procedures. Experience following quality standard and inspection requirements to IPC 610 A Class III. Able to read and understand engineering bill of materials and drawings

This position will oversee production lines and staff to ensure timely and efficient work flow, while meeting finished product specifications. In this role, will also partner with Quality Assurance to ensure quality standards are met, and will track labor and raw product yields. Accountabilities: * Communicate with Production staff and management team to ensure proper follow through on duties. * Perform product inventory cycle counts as directed. * Maintain accurate documentation for food safety purposes. * Advise management of unsafe conditions and provide recommendations for improvement. * Communicate well (both written and verbal) with management, as well as direct employees in a productive/professional manner. * Assist with scheduling of work teams, and initiate short and long-term plans with Production Management. * Assist with training of employees and ensure they are provided ongoing skills development and coaching, to improve job performance. * Assess daily and weekly output, identify issues in productivity, and manage the allocation of people and equipment, to address day-to-day variations in demand and capacity, across assigned lines. * Perform tasks as related to position of production employee when needed. * Flexible-Willing to move around within department or to different shifts. * Any other accountability will be discussed at the time of the interview. * Will be required to stay later if needed. Minimum Skills Required: * High School Diploma or equivalent, from an accredited institution. * Knowledge of Microsoft Office programs (i.e. Word, Excel, and Outlook, etc.). * At least 1 year prior experience in a similar role in a production environment. * Strong analytical and organizational skills. * Must be able to communicate well (both written and verbal) with management as well as direct employees in a productive/professional manner. * Must be able to work in a production area which includes noise, equipment moving, sharp utensils, wet, and cold ( * Strong attention to detail and problem solving abilities. Preferred: * Hazard Analysis & Critical Control Points (HACCP) experience. * Fork Lift and/or Electric pallet jack experience. * Bi-lingual: English and Spanish * Food Experience (Fresh Fruit) * Please note: This position does not qualify for relocation expenses. * Fresh Del Monte Produce Inc. is a global leader in the production, distribution, and marketing of fresh and fresh-cut fruits and vegetables. Our diverse product portfolio also includes prepared fruits and vegetables, juices, beverages, snacks, and desserts-available in over 80 countries worldwide. With operations spanning more than 35 countries, we've proudly been nourishing families for over 135 years. We are committed to maintaining a drug-free workplace and are proud to be an Equal Opportunity Employer. Fresh Del Monte and its affiliates do not discriminate based on race, color, religion, national origin, age, disability, gender, veteran status, or any other characteristic protected by applicable law. We also participate in E-Verify* where applicable, to ensure employment authorization eligibility. Driven by our core values-Excellence, Care, Passion, Trust, and Creativity-we invite you to explore our career opportunities and join our FRESH team.

About the Job The IV Production Technician prepares all medication for compounding performs IV preparation under sterile technique and packages medication for distribution for ordering entity according to policy and procedure manual. Primary Duties and Responsibilities * Accurately compounds and completes mixing of TPN in the appropriate timeframe as set forth by the productivity standards. * Accurately prepares all medication according to the mixing report prepared by the pharmacist utilizing good compounding technique. Labels patient specific medications for inspection by pharmacist. Records lot numbers and expiration dates on mixing reports for all dispenses. * Completes set up of TPN compounder according to policy and procedure for inspection by pharmacists. * Contributes to the achievement of established department goals and objectives and adheres to department policies procedures quality standards and safety standards. Complies with governmental and accreditation regulations. * Maintains daily production logs as outlined in the Policy and Procedure manual. Consistently signs off processes that will validate medications produced. * Maintains department facilities equipment and materials through cleaning and signs off processes that will validate accurate operation. * Participates in the on-call rotation and rotates to the prep area room as requested. * Participates in the ongoing review maintenance and revision of the CIVAC policy and procedures. * Performs other duties as assigned. * Receives all bins into the clean room for compounding and prioritizes mixing of medications. * Records data in Simplifi-797 including but not limited to temperature monitoring (incubator refrigerators and freezers) cleaning activities. Minimal Qualifications Education * High School Diploma or GED required or equivalent required Experience * 6 months experience working in a pharmacy required and * 1-2 years Pharmacy technician experience in a retail or hospital setting preferred Licenses and Certifications * Registered technician in Maryland and has achieved pharmacy technician certification through a nationally accredited certification examination (such as PTCB) required This position has a hiring range of USD $19.55 - USD $34.25 /Hr. General Summary of Position The IV Production Technician prepares all medication for compounding performs IV preparation under sterile technique and packages medication for distribution for ordering entity according to policy and procedure manual. Primary Duties and Responsibilities * Accurately compounds and completes mixing of TPN in the appropriate timeframe as set forth by the productivity standards. * Accurately prepares all medication according to the mixing report prepared by the pharmacist utilizing good compounding technique. Labels patient specific medications for inspection by pharmacist. Records lot numbers and expiration dates on mixing reports for all dispenses. * Completes set up of TPN compounder according to policy and procedure for inspection by pharmacists. * Contributes to the achievement of established department goals and objectives and adheres to department policies procedures quality standards and safety standards. Complies with governmental and accreditation regulations. * Maintains daily production logs as outlined in the Policy and Procedure manual. Consistently signs off processes that will validate medications produced. * Maintains department facilities equipment and materials through cleaning and signs off processes that will validate accurate operation. * Participates in the on-call rotation and rotates to the prep area room as requested. * Participates in the ongoing review maintenance and revision of the CIVAC policy and procedures. * Performs other duties as assigned. * Receives all bins into the clean room for compounding and prioritizes mixing of medications. * Records data in Simplifi-797 including but not limited to temperature monitoring (incubator refrigerators and freezers) cleaning activities. Minimal Qualifications Education * High School Diploma or GED required or equivalent required Experience * 6 months experience working in a pharmacy required and * 1-2 years Pharmacy technician experience in a retail or hospital setting preferred Licenses and Certifications * Registered technician in Maryland and has achieved pharmacy technician certification through a nationally accredited certification examination (such as PTCB) required

About the Job The IV Production Technician prepares all medication for compounding performs IV preparation under sterile technique and packages medication for distribution for ordering entity according to policy and procedure manual. Primary Duties and Responsibilities * Accurately compounds and completes mixing of TPN in the appropriate timeframe as set forth by the productivity standards. * Accurately prepares all medication according to the mixing report prepared by the pharmacist utilizing good compounding technique. Labels patient specific medications for inspection by pharmacist. Records lot numbers and expiration dates on mixing reports for all dispenses. * Completes set up of TPN compounder according to policy and procedure for inspection by pharmacists. * Contributes to the achievement of established department goals and objectives and adheres to department policies procedures quality standards and safety standards. Complies with governmental and accreditation regulations. * Maintains daily production logs as outlined in the Policy and Procedure manual. Consistently signs off processes that will validate medications produced. * Maintains department facilities equipment and materials through cleaning and signs off processes that will validate accurate operation. * Participates in the on-call rotation and rotates to the prep area room as requested. * Participates in the ongoing review maintenance and revision of the CIVAC policy and procedures. * Performs other duties as assigned. * Receives all bins into the clean room for compounding and prioritizes mixing of medications. * Records data in Simplifi-797 including but not limited to temperature monitoring (incubator refrigerators and freezers) cleaning activities. Minimal Qualifications Education * High School Diploma or GED required or equivalent required Experience * 6 months experience working in a pharmacy required and * 1-2 years Pharmacy technician experience in a retail or hospital setting preferred Licenses and Certifications * Registered technician in Maryland and has achieved pharmacy technician certification through a nationally accredited certification examination (such as PTCB) required This position has a hiring range of USD $19.55 - USD $34.25 /Hr.

*English communication required* Hiring for 2nd & 3rd shift 2nd shift: 3:00p - 11:30p EST 3rd shift: 11:00a - 7:30a EST Must be able to train from 8:30am - 5:00pm EST for 1 month Flexibility to work Overtime is Required JOB SUMMARY The Production Operator performs functions relating to the processing of drug products, ensuring product compliance to established current Good Manufacturing Practices (cGMPs), customer requirements and in conjunction with all Standard Operating Procedures (SOPs). Follows standard procedures to complete tasks, some of which may vary in scope, sequence, complexity, and timing. Applies skills and knowledge to recognize issues and to increase efficiency, throughput, and quality. Understands and runs processes to meet the assigned standards/routers and fulfills the assigned schedule; when these are not achieved, participates in the debrief to understand the reasons why and what needs to be corrected moving forward. Assists in troubleshooting process issues. Responsible for the safe and efficient execution of job duties. Production Operator Trainee - Operator I Pay rate: $18 - $22 / hour Production Operator II - III (Skilled Operators)- must have OSD Manufacturing experience Pay rate: $22 - 33 / hour (Flexible based on experience) Key Accountabilities: Operates pharmaceutical production machinery and follows the procedures for manufacturing such as weighing, blending, dispensing, mixing, pellet coating, granulating, drying, milling, blending, compressing, Encapsulating, Coating, potent compound, etc. Meets the requirements for use of manufacturing equipment and other commonly used equipment per SOPs. Executes written SOPs to ensure the purity of materials involved in the manufacturing process. Properly uses all scales, including printouts, zeroing, setting tares, and daily calibration verification per SOPs. Examines manufacturer Product ID Labels, Quality Control release tags, and Batch Production Record to verify issued/staged raw materials can be released for production. Cleans manufacturing equipment and facilities according to established SOPs. Executes machine changeovers from batch to batch. May sample batches for quality testing. Executes required in-process product quality checks and documents accurately. Understands and runs processes to meet the assigned schedule and standards/routers; when this is not achieved, participates in the debrief to understand the reasons why and what needs to be corrected moving forward. Documentation: Completes documentation associated with manufacturing processes (e.g. batch record, protocols, and logbooks) with detail and accuracy. Meets requirements for entries on all applicable Batch Production pages, completion and attachment of all dispensary and weight verification tickets. Verifies the manufacturing process on BPR in an accurate and timely manner. Provides status updates and operational challenges on status boards. Continuous Improvement: Assists in troubleshooting process issues; refers deviations from standard procedure to the supervisor. Typically participates in at least one continuous improvement project of a moderate scope and complexity. Safety & Compliance: Adheres to all cGMP compliance/regulatory mandates and quality requirements. Participates in safety teams, start-up discussions, incident debriefing sessions, etc. Ensures compliance with SOPs, policies and procedures as required by the Company and regulatory agencies. Maintain a clean, organized, work area. Training: Conforms to all training requirements, including company required and machine-specific training. Teamwork & Collaboration: Contributes to team and project success by sharing previously acquired knowledge. Collaborates typically within own cross-functional work unit and occasionally with contacts outside own unit or department. Requirements - Trainee - Level I Operator: HS diploma, GED or College Associate Degree Minimum of 1-3 years experience in a labor intensive environment Forklift certification preferred. Ability to communicate and comprehend English language both verbally and written - Level II Operator (OSD/Solid Dose Manufacturing expereince required): HS diploma, GED or College Associate Degree Minimum of 3-7 years of OSD pharmaceutical manufacturing (cGMP) experience Forklift certification preferred. - Level III Operator (OSD/Solid Dose Manufacturing expereince required): HS Diploma, GED or College Associate Degree Minimum 7+ years of pharmaceutical manufacturing (cGMP) experience and certification in assigned area, as required or proficiency demonstrated in competencies as required. Forklift certification preferred. Required Knowledge & Skills for Level II & III Strong background in solid dose manufacturing (OSD) Experience in 1 or more of the following areas: Compression, Granulation, Encapsulation, Wurster Coating, Coating, Fluid Bed Dryers, Bead Tower Capable of cleaning, setting-up, dismantling and operating state of the art tablet presses and encapsulation, i.e., Fette 3200i; Fette P 3030; MG2 planeta; Korsch XM 12. Knowledgeable of FDA regulations, GMP, Lean Manufacturing, Six-Sigma, etc. Solid working knowledge and skills in procedures, techniques, tools, materials and/or equipment needed for the position. Basic math, reading, legible writing skills, and problem-solving abilities. Proficient in sampling batches Ability to participate in Continuous Improvement projects. Required for all levels: Written Communication - Writes clearly and informatively; Edits work for spelling and grammar; Varies writing style to meet needs; Presents numerical data effectively; Able to read and interpret written information. Oral Communication - Speaks clearly and persuasively in positive or negative situations; listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings. Physical Requirements: Must be able to stand for long periods of time (up to 12 hour shifts), maneuver at least 50 pounds, climb ladders, wear a respirator and pass associated respirator tests and/or requirements, and be able to wear all required PPE, including safety glasses, ear plugs, and safety shoes. Salary Description $18- $33 per hour (Flexible based on experience)

We have a wonderful opportunity for machine operators in Crofton, MD with a local manufacturer. QUALIFICATIONS Machine operator experience and mechanical skills Basic computer and math skills Ability to read and interpret documents such as safety rules, operating and maintenance instruction, and procedure manuals. Must be a self-starter and work independently and assist other operators to set up machines and any other necessary tasks to adhere to deadlines and completion of product. Must make sure all housekeeping is maintained in a clear and orderly fashion in assigned area. Must be able to maintain a high level of accuracy in all aspects of work assignments and apply common sense understanding to carry out instructions furnished in written, oral, and diagram form. Ability to work a flexible schedule, lift/move product up to 50lbs, and will be required to frequently stand on their feet for extended periods of time. ESSENTIAL DUTIES AND RESPONSIBILITIES Run manufacturing equipment safely and efficiently and follow supervisor's instructions and the company's safety policies to ensure that the products coming off the machine meet company standards for quality. Safety and consistency are top priorities. Review instructions that tell you what product is being made, what materials are needed, and how the machine should be set up. Will physically adjust the machine's measuring devices - like stops, guides, or rulers - to control the length, height, or thickness of the product being made. Will keep an eye (and ear) out for anything unusual - like strange noises, jams, or defective output and inspect the finished product to make sure it looks right and meets company quality standards. Will handle simple maintenance tasks - cleaning, lubricating parts, replacing worn components, or checking oil levels - to keep the machine running well. You may help coworkers adjust or prepare their machines, or jump in to handle general labor tasks (like loading materials or stacking finished products) to meet production goals and may occasionally be asked to handle extra tasks that support production - such as helping in another department, loading trucks, or completing paperwork. Will be responsible for keeping your workspace clean and organized - sweeping up debris, putting tools away, and ensuring materials aren't blocking aisles. HOURS: 5am-5pm, Monday through Thursday Or 5am-5pm, Monday through Saturday one week and Tuesday through Saturday the next. PAY: Pay ranges from $18 to $22 an hour depending on experience. #ISS

SummaryPerforms routine set up, operation, minor and major routine maintenance, preventative maintenance (PM) and troubleshooting of highly complex/automated manufacturing equipment. Controls and adjusts machine settings. Inspects in-process parts to ensure consistent quality and removes defective product, packaging, and component material. Must possess mechanical aptitude to complete changeover of equipment and some operator level preventive maintenance. Assist with root-cause analysis activities for process or product exceptions. Checks work using prescribed gauges, jig and fixtures to measure close tolerances. Monitors and verifies quality in accordance with statistical process or other control procedures. Ensures accurate documentation of all relevant quality, safety and maintenance documents. Identifies, troubleshoots, and resolves complex issues associated with the machine performance and/or product quality.Job Description We are the makers of possible BD is one of the largest global medical technology companies in the world. Advancing the world of health™ is our Purpose, and it's no small feat. It takes the imagination and passion of all of us-from design and engineering to the manufacturing and marketing of our billions of MedTech products per year-to look at the impossible and find transformative solutions that turn dreams into possibilities. We believe that the human element, across our global teams, is what allows us to continually evolve. Join us and discover an environment in which you'll be supported to learn, grow and become your best self. Become a maker of possible with us. Job Summary Performs routine set up, operation, minor and major routine maintenance, preventative maintenance (PM) and troubleshooting of highly complex/automated manufacturing equipment. Controls and adjusts machine settings. Inspects in-process parts to ensure consistent quality and removes defective product, packaging, and component material. Must possess mechanical aptitude to complete changeover of equipment and some operator level preventive maintenance. Assist with root-cause analysis activities for process or product exceptions. Checks work using prescribed gauges, jig and fixtures to measure close tolerances. Monitors and verifies quality in accordance with statistical process or other control procedures. Essential Functions: Works within standards and operating procedures to plan, perform, and make decisions regarding the set up and operations of a variety of production equipment, including automated machine processes and controls to perform routine assembly-line production functions of filling, packing, assembling, labeling and inspecting Uses independent judgment in troubleshooting and problem solving under little/no supervision May perform clean up functions in sterilized areas Identifies the need for minor equipment repairs Analyze and evaluate charts, follows simple diagrams, testing, and inspecting procedures Conducts root-cause analysis activities for process or product exceptions May monitor quality in accordance with statistical process or other control procedures. Ensures accurate documentation of all relevant quality, safety, and maintenance documents. Identifies, troubleshoots, and resolves complex issues associated with the machine performance and/or product quality. Provides support to the lead/supervisor when necessary May provide training support for on-boarding and/or new procedures May provide support on special projects Demonstrates the ability to follow established procedures according to Good Manufacturing Practices (GMP) Must follow all BD housekeeping policies and procedures Must follow all BD safety policies and procedures Must be able to work overtime as required to meet BD business requirements Perform other duties as required Shift: 1st / 6:00 a.m. - 4:30 p.m. / Monday - Thursday Minimum Education/Experience: High School degree with 4 years manufacturing experience including Food, Pharma, and Industrial production settings. Must have experience working in a regulated environment (FDA). AA technical degree with 2 years experience. Basic Skills: Can effectively work in a team setting and communicate effectively across the department. Strong attention to detail. Ability to be punctual in order to ensure production. Ability to work on assignments that are semi-routine in nature with the skill to recognize any deviations from specification. Ability to operate independently within the constraints of approved process-related documentation. Proficient/Working Skills: Must be proficient in English with the ability to read, write, analyze/evaluate charts, follow simple diagrams and perform basic arithmetic. At BD, we prioritize on-site collaboration because we believe it fosters creativity, innovation, and effective problem-solving, which are essential in the fast-paced healthcare industry. For most roles, we require a minimum of 4 days of in-office presence per week to maintain our culture of excellence and ensure smooth operations, while also recognizing the importance of flexibility and work-life balance. Remote or field-based positions will have different workplace arrangements which will be indicated in the job posting. For certain roles at BD, employment is contingent upon the Company's receipt of sufficient proof that you are fully vaccinated against COVID-19. In some locations, testing for COVID-19 may be available and/or required. Consistent with BD's Workplace Accommodations Policy, requests for accommodation will be considered pursuant to applicable law. Why Join Us? A career at BD means being part of a team that values your opinions and contributions and that encourages you to bring your authentic self to work. It's also a place where we help each other be great, we do what's right, we hold each other accountable, and learn and improve every day. To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you'll discover a culture in which you can learn, grow, and thrive. And find satisfaction in doing your part to make the world a better place. To learn more about BD visit ********************** Becton, Dickinson, and Company is an Equal Opportunity Employer. We evaluate applicants without regard to race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, and other legally-protected characteristics. #earlycareer Required Skills Optional Skills . Primary Work LocationUSA MD - Hunt ValleyAdditional LocationsWork Shift At BD, we are strongly committed to investing in our associates-their well-being and development, and in providing rewards and recognition opportunities that promote a performance-based culture. We demonstrate this commitment by offering a valuable, competitive package of compensation and benefits programs which you can learn more about on our Careers Site under Our Commitment to You. Salary or hourly rate ranges have been implemented to reward associates fairly and competitively, as well as to support recognition of associates' progress, ranging from entry level to experts in their field, and talent mobility. There are many factors, such as location, that contribute to the range displayed. The salary or hourly rate offered to a successful candidate is based on experience, education, skills, and any step rate pay system of the actual work location, as applicable to the role or position. Salary or hourly pay ranges may vary for Field-based and Remote roles. Salary Range Information $22.70 - $35.20 USD Hourly

Accelerate the possible by joining a winning Amcor team that's transforming the packaging industry and improving lives around the world. At Amcor, we unpack possibility through our innovative and responsible packaging to provide solutions that benefit our customers, our people and our planet. More than 10,000 consumers worldwide encounter our products every second and rely on us for safe access to food, medicine and other goods. We value their trust by making safety our guiding principle. It's our core value and integral to how we do business. Beyond this core principle, our shared values and behaviors unite us as we work together to elevate customers, shape lives and protect the future. We champion our customers and help them succeed. We play to win - adapting quickly in an everchanging world - and make smart choices to safeguard our business, our communities and the people we serve for generations to come. And we invest in our world-class team, empowering our colleagues to unpack their potential, because we believe when our people grow, so does our business. To learn more about playing for Team Amcor, visit ************* | LinkedIn | YouTube SUMMARY: Responsible for production and quality of machine output. Responsibilities Maintain productivity and quality output of Production Machines (to include Injection Molding, Compression Molding, Vision, and High Speed Assembly Machines). Perform tooling changes, set-ups, material changes on production equipment. Troubleshoot production machinery, and support equipment. Accurately complete routine paperwork Submit work order for repair of equipment beyond ability of department mechanic. Must perform any other assigned duties. Qualifications High school diploma or equivalent. Excellent attendance and good work history. Must score at least 65% on mechanical aptitude test. Able to quickly learn the mechanics of high speed lining machines. Prior mechanic experience. Knowledge of product and materials a plus. Able to provide or purchase own tools as needed. Capable of physical mobility including walking, sitting, bending, climbing, twisting, standing, pushing, pulling and lifting/moving (up to 50 pounds) Able to work in a production environment, recognizing various sounds and alarms. Able to work overtime as needed. Must perform all duties in a safe and effective manner. Additional Info Pay Range: $21.84 - 26.

The Role As a Machine Operator, you will be responsible for setting up, safely operating, and ensuring basic maintenance of a variety of pieces of automated and semi-automated machinery to make high quality cannabis products. The Machine Operator is also responsible for ensuring that all products meet our standards (including product formulas, visual appearance, packaging, etc.), inspecting and ensuring equipment is ready to run, adjusting equipment to run at optimal speed while ensuring safety and quality. Responsibilities Safety: Follow all department specific safety practices including the use of PPE Responsible for maintaining the organization and cleanliness of the designated work area, including supporting all 5S requirements Remain compliant with all safety training requirements Promptly report safety concerns, including near miss situations Production: Perform equipment inspections, calibrations, line centering, etc. to ensure the successful operation of equipment. Responsible for increasing operational efficiency and reducing waste through ownership, teamwork, communication, and collaboration. Work in a fast-paced environment and meet productivity standards Follow SOP's and work instructions to complete the tasks according to company standards Work in a quick and efficient manner and strives to consistently increase productivity Responsible for regular maintenance and cleaning of all equipment. Participate in trial runs, new product development projects and training of other employees. Work in a team environment and be part of building a positive environment Quality & Compliance: Demonstrate accuracy and thoroughness to improve and promote quality Perform in-process and post-process quality assurance testing and conducting visual inspections to ensure all product meets or exceed our strict specifications and patient's expectations. Ensure 100% compliance involving proper weighing, data recording, product tracking, and security awareness throughout all times. Teamwork (makes the dream work): Participate in daily communication meetings Elevate issues to a lead, direct manager, and HR as appropriate Create a positive working environment Escalate areas of process improvement Perform any additional tasks assigned by a manager or lead Qualifications Minimum of a high school diploma or GED; associates degree or certifications preferred Effective time-management skills and ability to multi-task Ability to work well with others while also completing individually assigned tasks Ability to stand, sit, kneel, and lift equipment or plants up to 50 lbs. for extended periods Ability to work in a fast-paced, changing and challenging environment Must be able to comply with Good Manufacturing Practices (GMP) requirements Must be able to work at heights Prior experience running automated equipment Basic math and mechanical skills Curiosity to understand how the equipment works to support troubleshooting or process improvements Effectively follow state and company compliance requirements Excellent customer service, time management and organization skills Prior cannabis experience not required Additional Requirements Must pass any and all required background checks Must be and remain compliant with all legal or company regulations for working in the industry Must be a minimum of 21 years of age Must be approved by state badging agency to work in cannabis industry Working Conditions While performing the duties of this job, the employee is regularly required to perform reaching, grasping, bending, stooping, talking, hearing, seeing and repetitive motions. Must be able to sit and/or stand for extended periods of time while maintaining focus. Must be able to lift, carry, and balance up to 50 pounds AND must be able to do so with extreme care and caution when working with product. Work involves daily exposure to allergens (such as cannabis, tree nuts, and coconut oil). The pay range is competitive and based on experience, qualifications, and/or location of the role. Positions may be eligible for a discretionary annual incentive program driven by organization and individual performance. Green Thumb Pay Range$20-$21 USD

Performs routine set up, operation, minor routine maintenance, preventative maintenance (PM) and troubleshooting of moderately complex/automated manufacturing equipment. Controls and adjusts machine settings. Inspects in-process parts to ensure consistent quality and removes defective product, packaging, and component material. Assists with root-cause analysis activities for process or product exceptions. Checks work using prescribed gauges, jigs and fixtures to measure close tolerances. May monitor quality in accordance with statistical process or other control procedures. Ensures accurate documentation of all relevant quality, safety, and maintenance documents. Identifies, troubleshoots, and resolves basic issues associated with the machine performance and/or product quality. **Job Description** We are **the makers of possible** BD is one of the largest global medical technology companies in the world. Advancing the world of health is our Purpose, and it's no small feat. It takes the creativity and passion of all of us-from design and engineering to the manufacturing and marketing of our billions of MedTech products per year-to look at the impossible and find entrepreneurial solutions that turn dreams into possibilities. We believe that the human element, across our global teams, is what allows us to continually evolve. Join us and discover an environment in which you'll be supported to learn, grow and become your best self. Become a **maker of possible** with us. **Job Overview** Performs routine set up, operation, minor routine maintenance, preventative maintenance (PM) and troubleshooting of moderately complex/automated manufacturing equipment. Controls and adjusts machine settings. Inspects in-process parts to ensure consistent quality and removes defective product, packaging, and component material. Assists with root-cause analysis activities for process or product exceptions. Checks work using prescribed gauges, jigs and fixtures to measure close tolerances. May monitor quality in accordance with statistical process or other control procedures. Ensures accurate documentation of all relevant quality, safety, and maintenance documents. Identifies, troubleshoots, and resolves basic issues associated with the machine performance and/or product quality. **Responsibilities and Duties** + Works within standards and operating procedures to plan, perform, and make decisions regarding the set up and operations of a variety of production equipment, including automated machine processes and controls to perform routine assembly-line production functions of filling, packing, assembling, labeling and inspecting + Uses independent judgment in troubleshooting and problem solving under general supervision + May perform clean up functions in sterilized areas + Identifies the need for minor equipment repairs + May analyze and evaluate charts, follows simple diagrams, testing, and inspecting procedures + Assists with root-cause analysis activities for process or product exceptions + May monitor quality in accordance with statistical process or other control procedures. + Ensures accurate documentation of all relevant quality, safety, and maintenance documents. Identifies, troubleshoots, and resolves basic issues associated with the machine performance and/or product quality. + Demonstrates the ability to follow established procedures according to Good Manufacturing Practices (GMP) + Must follow all BD housekeeping policies and procedures + Must follow all BD safety policies and procedures + Must be able to work overtime as required to meet BD business requirements + Perform other duties as required + Shift: 3rd / 10:00 p.m. - 06:30 a.m. / Monday - Friday **Qualifications** _Minimum Education/Experience:_ + High school with 2 years manufacturing. Experience in a regulated environment preferred. _Basic Skills:_ + Can effectively work in a team setting and communicate effectively across the department + Strong attention to detail + Ability to be punctual in order to ensure production + Ability to work on assignments that are semi-routine in nature with the skill to recognize any deviations from specification + Ability to operate independently within the constraints of approved process-related documentation _Proficient/Working Skills:_ + Must be proficient in English with the ability to read, write, analyze/evaluate charts, follow simple diagrams and perform basic arithmetic + Basic proficiency with PCs (Personal Computers) and basic use of a Windows environment is required At BD, we prioritize on-site collaboration because we believe it fosters creativity, innovation, and effective problem-solving, which are essential in the fast-paced healthcare industry. For most roles, we require a minimum of 4 days of in-office presence per week to maintain our culture of excellence and ensure smooth operations, while also recognizing the importance of flexibility and work-life balance. Remote or field-based positions will have different workplace arrangements which will be indicated in the job posting. For certain roles at BD, employment is contingent upon the Company's receipt of sufficient proof that you are fully vaccinated against COVID-19. In some locations, testing for COVID-19 may be available and/or required. Consistent with BD's Workplace Accommodations Policy, requests for accommodation will be considered pursuant to applicable law. **Why Join Us?** A career at BD means being part of a team that values your opinions and contributions and that encourages you to bring your authentic self to work. It's also a place where we help each other be great, we do what's right, we hold each other accountable, and learn and improve every day. To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you'll discover a culture in which you can learn, grow, and thrive. And find satisfaction in doing your part to make the world a better place. To learn more about BD visit ********************** Becton, Dickinson, and Company is an Equal Opportunity Employer. We evaluate applicants without regard to race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, and other legally-protected characteristics. \#earlycareer Required Skills Optional Skills . **Primary Work Location** USA MD - Hunt Valley **Additional Locations** **Work Shift** At BD, we are strongly committed to investing in our associates-their well-being and development, and in providing rewards and recognition opportunities that promote a performance-based culture. We demonstrate this commitment by offering a valuable, competitive package of compensation and benefits programs which you can learn more about on our Careers Site under Our Commitment to You (********************************************* . Salary or hourly rate ranges have been implemented to reward associates fairly and competitively, as well as to support recognition of associates' progress, ranging from entry level to experts in their field, and talent mobility. There are many factors, such as location, that contribute to the range displayed. The salary or hourly rate offered to a successful candidate is based on experience, education, skills, and any step rate pay system of the actual work location, as applicable to the role or position. Salary or hourly pay ranges may vary for Field-based and Remote roles. **Salary Range Information** $19.10 - $29.70 USD Hourly Becton, Dickinson and Company is an Equal Opportunity/Affirmative Action Employer. We do not unlawfully discriminate on the basis of race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, or any other protected status.

Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets. Factory Location: Lorton, VA Compensation: $25.73 / hour Shift differential: 6%-8% of base hourly rate paid for applicable hours worked Schedule: 1st shift, 6:00am - 2:30pm, Monday - Friday Ability to work holidays and weekends per business needs Benefits: Medical, prescription, dental, vision, life and disability insurance, 401(k) with match, company discounts, paid vacation, and much more! Employees are eligible for benefit election on day 1 of employment Responsibilities Skills Required: Operate, changeover, clean, troubleshoot, and complete basic maintenance according to company standards on production equipment consisting of fillers, labelers, case packers, palletizers, blow mold machines, wrappers, and forklifts Record the following: preventative maintenance activities, quality inspection data, equipment downtime, production output and other key metrics Adhere to safe work practices, good manufacturing practices, and participate in safe behavior observation programs Communicate effectively when issues arise that prevent operating to company standards/procedures Meet or exceed performance metrics including efficiency, production, and downtime Perform mathematical calculations as needed Ensure quality product is sent to customers by completing hourly quality checks Inspect raw materials against quality standards before loading them Interact with team members from various departments (Quality Assurance, Maintenance, etc.) to maximize output and efficiency Attend shift, team, and plant meetings during their scheduled times Measure and continuously improve the line operation as a team and with other technicians Crosstrain in other areas to support operations during downtimes Maintain your workstation in an organized and clean manner ensuring safety and good manufacturing practices Focus on safe work practices and high quality while executing duties with a sense of urgency Qualifications High school diploma, GED, or equivalent experience Prior experience in clean manufacturing preferred Ability to work the scheduled shift which includes start-up and handover meetings Exposure to high-speed production and/or basic maintenance is preferred Troubleshooting and root cause analysis experience Ability to work on your own and with a team Strong communication skills both face to face and over the radio Computer skills with knowledge of Microsoft applications, SAP experience a plus Forklift experience is preferred, but we are able to train new associates Ability to lift and move 50 lbs. and stand on your feet for extended periods of time throughout the day Ability to work in adverse environmental conditions, including inclement weather and changes in temperature Primo Brands' established portfolio includes billion-dollar brands Poland Spring and Pure Life , premium brands like Saratoga and Mountain Valley , regional leaders such as Arrowhead , Deer Park , Ice Mountain Ozarka , and Zephyrhills , purified brands, Primo Water and Sparkletts , and flavored and enhanced brands like Splash and AC+ION . Our extensive direct-to-consumer offerings and industry-leading line-up of innovative water dispensers create consumer connectivity through recurring water purchases across Water Direct, Water Exchange, and Water Refill. At Primo Brands, our more than 11,000 associates are at the heart of what we do and deliver on our mission to provide healthy hydration to consumers wherever, however and whenever they want it. We believe in fostering a respectful culture, which values our associates who are deeply invested in quality hydration, our communities, and the sustainability of our packaging and water sources for generations to come. Primo Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law.

Job Description: Mailroom/Machine Operator (Temp-to-Perm) We are seeking a reliable and detail-oriented Mailroom/Machine Operator for a temporary-to-permanent opportunity in our Glen Burnie, MD site. This role focuses on providing essential administrative support to business operations through the processing, sorting, and scanning of incoming mail and materials. The successful candidate will operate high-speed mail processing equipment and ensure complete accuracy and compliance in all tasks. Job Details Location Glen Burnie, MD (1000 Stewart Avenue) Schedule Full-Time: 40 hours per week Work Days Monday, Tuesday, Thursday, Friday, Saturday Days Off Wednesday and Sunday Shift Hours 6:00 AM - 2:30 PM Compensation $18.00 per hour Contract Length Temporary (11/17/2025 - 02/16/2026) with opportunity for Permanent Conversion Note: We are primarily seeking candidates residing in Anne Arundel County, MD, including Severn, Glen Burnie, Crofton, Linthicum, Ferndale, and Gambrills, due to current commute challenges from other areas. Key Responsibilities The Transaction Processing Specialist II will be responsible for a variety of mailroom and data capture duties, including: Mail Processing & Sorting: Operating high-speed Opex P40 mail sorter and Opex envelopener equipment. Performing physical sorting of mail into corresponding lockbox mail bins. Handsorting mis-sorted mail and other documents as assigned. Scanning & Data Capture: Conducting inbound scanning and delivery of receipted mail. Operating high/low speed capture equipment for transaction processing. Handling exceptions and similar activities related to document imaging. General Duties: Performing basic data entry and utilizing computer applications. Completing required accuracy and compliance testing. Performing clerical tasks as needed and other duties as assigned by management. Qualifications Must have basic data entry skills and working computer knowledge. Ability to operate mail sorting and opening equipment (training provided on specific models). Must be able to perform physical duties, including standing, walking, and lifting up to 10 lbs. High level of accuracy and attention to detail is critical. Ability to work the required schedule: Monday, Tuesday, Thursday, Friday, and Saturday from 6:00 AM to 2:30 PM. Next Steps If you are interested in this temporary-to-permanent role and meet the qualifications, please submit your application.

PACKER - INSPECTOR Experience not necessary; training provided! Location: Sterling, MA In a Nutshell: Laddawn has manufacturing facilities located from coast to coast, which allows us to rapidly ship to our customers no matter where they are located. You'll help us inspect and package finished product that wows our customers. What you'll be doing: · Packaging bags\/rolls into boxes, weighing the boxes, and keeping accurate counts in the computer system. · Performing quality control checks on product and ensuring that all products are properly labeled with a Q.C. sticker before stacking finished product. · Keeping the work area clean and clutter free: picking up scrap materials around the production lines and cutting scrap off cores. · Alerting Setup Technicians or Changeover Technicians using the light system to keep them informed of production status. Scheduling Production workers are scheduled 12 hours per day, 4 days per week, and work every other weekend. Day shift is scheduled from 8am\-8pm. Night shift is scheduled from 8pm\-8am. Apply if you are able to: · Work independently and use common sense and critical thinking skills to handle and resolve problems. · Measure small increments on a ruler. · Read order specifications in English and use basic math skills. · Be punctual and arrive at the production line on time. · And you cannot be afraid of heights Education High School Diploma or equivalent Physical Demands · Regularly required to stand and communicate · Ability to see and hear · Occasionally required to stretch, bend, climb or balance · Often required to lift and\/or move up to 65 lbs. · Frequently required to lift 30 to 40 pounds · Occasionally climb towers up to 35 feet high About Us: We're a family\-owned company that's been around for over 40 years, but we have the attitude of a start\-up and we're growing like crazy! As a web based wholesaler, we are revolutionizing the way businesses buy flexible packaging products, and our sales are proving it. At Laddawn, we are constantly working to elevate our game. We are fun, unique, and a little quirky\-\- business as usual just isn't our style. Teams and individuals alike take ownership of business challenges and are empowered to make decisions that shape our success. Have we caught your attention yet? If so, apply now if you think you can keep up. The information listed above is not intended to be an all\-inclusive list of the duties and responsibilities of the job described. All qualified applicants will receive consideration for employment without regard to race, sex, color, religion, national origin, protected veteran status, or on the basis of disability. "}}],"is Mobile":false,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"61177098","FontFamily":"Verdana, Geneva, sans\-serif","job OtherDetails":[{"field Label":"Department Name","uitype":4,"value":"Production"},{"field Label":"Work Experience","uitype":2,"value":"0\-1 year"},{"field Label":"Industry","uitype":2,"value":"Manufacturing"},{"field Label":"City","uitype":1,"value":"Sterling"},{"field Label":"State\/Province","uitype":1,"value":"Massachusetts"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"01564"}],"header Name":"Machine Operator\/Packer","widget Id":"3***********078359","is JobBoard":"false","user Id":"3***********096003","attach Arr":[],"custom Template":"2","is CandidateLoginEnabled":false,"job Id":"3***********159007","FontSize":"14","location":"Sterling","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do"}

Join our team in Hunt Valley, MD, where you will have the opportunity to work in a dynamic and supportive environment. We are seeking dedicated individuals to perform routine production functions with precision and teamwork. Responsibilities Perform routine production tasks including filling, utility operations, packing, packaging, assembling, labeling, and inspecting under general supervision. Maintain accurate records and logs in compliance with FDA, GMPs, and ISO9000 standards. Collaborate effectively in a team setting to support team goals and objectives. Make informed decisions related to position requirements while following instructions and standard practices. Work under direct supervision, adhering to standard operating procedures. Qualifications High school diploma or equivalent. One to two years of true machine operating experience. Develop skills in basic tasks, techniques, and procedures within one skill area/process/method. Ability to read, write, interpret, and comprehend specifications in English and perform basic math calculations. Effective communication skills to interact with co-workers and Team Lead/Supervisor. Flexibility to train on 1st or 2nd shift and work flexible and/or extended hours. Willingness to rotate into different tasks and responsibilities. Work Hours Monday - Friday, 10pm - 6: 30am

The Personalization Machine Operator IV sets up and operates Datacard, Zebra, and other personalization equipment to process customer orders accurately and efficiently. This role ensures all identification cards meet quality standards, with any defective cards identified, documented, and remade. The position requires attention to detail, technical aptitude, and the ability to work efficiently in a fast-paced environment while supporting mailing and fulfillment processes. Job Responsibilities: * Operate personalization and fulfillment equipment efficiently and safely. * Select and prepare production data according to the daily schedule * Process production jobs with accuracy, speed, and attention to detail. * Perform quality checks to ensure all products meet company and customer standards. * Verify counts of finished products to confirm order completion. * Keep machines and work areas clean, organized, and well maintained. * Follow all company safety procedures and regulatory requirements. * Produce high-quality products within established timeframes while minimizing waste. * Record and route defective or remake materials for reprocessing. * Maintain accountability for all materials released and returned to secure storage. * Accurately document and prepare completed orders for shipment each day. * Track job progress and update production data through the ERP system. * Follow ISO work instructions and company quality procedures. * Review and sign off on completed card production. * Print, fold, and insert mail pieces according to job specifications and documentation. * Meter, seal, and prepare envelopes for mailing as instructed. Accountabilities: * Complete all job orders accurately and on time. * Meet production schedules and service level goals consistently. * Verify that all card and carrier specifications meet required standards. * Maintain compliance with departmental KPIs, quality metrics, and company policies. Job Specifications: * Work performed in a fast paced production setting. * Required to lift up to 45 lbs. * Ability to sit or stand for long periods of time, and reach and move about facility. * Overtime may be required. * Wearing of company furnished smock is mandatory. Required Qualifications: * Strong mathematical aptitude. * Excellent organizational, verbal, and written communication skills. * Proven ability to multitask effectively in a fast-paced, high-demand environment. * Strong problem-solving and analytical thinking skills. * Effective interpersonal skills with the ability to collaborate across teams. * Capable of working independently with minimal supervision or as part of a team. * High attention to detail and strong hand-eye coordination. Preferred Qualifications: * High school diploma or equivalent. * Six months or more of experience in card personalization or a related manufacturing environment. * Proficiency with Microsoft Word and Excel.