Production operator jobs in Bowling Green, KY - 117 jobs

TITLE Production Technician REPORTS TO Area Leader/Team Leader Work in a variety of areas, in production and packaging, to produce product for the company. KEY RESPONSIBILITIES Follow all company Safety Rules and Good Manufacturing Practices (GMP's). Produce high quality products in a safe and healthful manner. Assigned shift attendance is required. To work in all areas of production and packaging, as assigned, which includes operating, being in close proximity to and crossing platforms over machinery. Ability to work as part of a team. Assist fellow employees as needed. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each duty and responsibility satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the duties and functions of the position. EDUCATION and/or EXPERIENCE High-school degree or equivalent is required. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, GMP's and general instructions. Good communication skills are required. REASONING ABILITY Ability to apply common sense understanding to carry out both oral and written instructions. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions and duties of this job. Reasonable accommodations may be made to enable individuals with disabilities. While performing the duties of this job, the employee is regularly required to stand and lift. The employee is required to stand and walk at minimum 70% of the time. The employee must be able to work 12 hour rotating shifts. The employees must occasionally lift/push/pull or carry up to fifty (50) pounds, and should be able to lift 30-35 pounds on a frequent basis. The employee must be able to squat or kneel and to bend on a frequent basis. The employee must be able to work in a cold (40-50 degree) environment. The employee must be able to tolerate exposure to flour and yeast materials. The employee must be able to climb steps on a frequent basis. VISION Employee is required to have a minimum of 20/40 vision in each eye with or without corrective lenses. The applicant must pass a standard eye exam. SAFE PERFORMANCE REQUIREMENTS Employee must have the ability to perform the essential job functions identified above consistent with safety standards and practices with or without a reasonable accommodation. WORK ENVIRONMENT The work environments characteristics described here are representative of those an employee encounters while performing the essential duties of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate to high.

Job Description Be part of a Company That Invests in YOU and Your Family! At Precision Strip, our associates are the reason we are known as the best in the metal processing industry. As we grow, we are looking for motivated individuals who are reliable, team-oriented, and looking for a long-term career with a company that values safety while providing excellent quality and service. What you will be doing in this role: Package materials as instructed by the customers Safely remove materials from the processing area What We're Looking For: High school diploma or GED Ability to work Monday through Friday, 5pm - 5am Previous forklift or crane experience in a manufacturing environment is a plus Ability to pass a hair-analysis drug test and background check Why Precision Strip? Precision Strip has a promote from within culture and invests in your career, growth, and well-being with a top-tier compensation and benefits package: Competitive Pay & Bonuses Starting at $23.75/hour with scheduled increases (plus shift premium) Monthly incentive bonus Exceptional Benefits Low-premium medical, dental, vision, life, and disability insurance 10% company contribution to 401(k) after 1 year Paid vacation and holidays Additional Perks Uniforms with free cleaning service Work boot reimbursement If you are someone who takes pride in their work and wants to grow in a stable, well-respected company, we want to hear from you! Precision Strip is a drug free workplace and an equal employment opportunity employer. Job Posted by ApplicantPro

First Brands Group is a proud equal opportunity employer. We are deeply committed to building a workplace and global community where inclusion is valued. Employment decisions at FBG are based on business needs, job requirements and individual qualifications, without regard to race, color, religion, or belief, national, social, or ethnic origin, sex, or age. All qualified applicants will be considered for employment without regard to the above forementioned as well as, gender, gender identity family/marital status, sexual orientation, national origin, age, past or present military veteran status, or any other non-merit based or legally protected grounds. FBG will not tolerate discrimination or harassment based on any of these grounds or characteristics.

**_About_** **_this_** **_Position_** At Henkel, you'll be part of an organization that's shaping the future through innovation, sustainability and collaboration. With our trusted brands like Persil , 'all , Loctite , Snuggle , and Schwarzkopf and our cutting-edge technologies, you'll have countless opportunities to explore new paths and grow. This position is with our Consumer Brands business unit - where we empower our employees to bring the best Laundry & Home Care and Hair products to people around the world. **Dare to learn new skills, advance in your career and make an impact at Henkel. ** **What you´ll do** + Operates machines and production equipment safely in accordance with instructions + Sets up or adjusts equipment according to manufacturing specifications + Monitors the quality of output to identify or discard re-manufacture faulty products + Maintains accurate daily production records so that manufacturing performance can be analyzed **What makes you a good fit** + Must be able to operator equipment independently. + Be knowledgeable on setting up equipment and making adjustments as needed. + Be knowledgeable on computers and complete required checks. **Some benefits of joining Henkel** + Health Insurance: affordable plans for medical, dental, vision and wellbeing starting on day 1 + Work-Life Balance: Paid time off including sick time, vacation time and holiday time + Financial: 401k matching, employee share plan with voluntary investment and Henkel matching shares, annual performance bonus, service awards and student loan reimbursement + Family Support: 12-week gender neutral parental leave (up to 20 weeks for parents giving birth), fertility support, adoption & surrogacy reimbursement, discounted child and elderly care, and scholarships + Career Growth: skill development programs, promotional opportunities and tuition reimbursement The salary for this role is $60.00. This is the range that we in good faith anticipate relying on when setting wages for this position. We may ultimately pay more or less than the posted range and this range. This salary range may also be modified in the future. Henkel does not accept unsolicited resumes from search firms or employment agencies. Unsolicited referrals and resumes are considered Henkel property and therefore, Henkel will not pay a fee for any placement resulting from the receipt of an unsolicited referral. Henkel is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information, and other legally protected categories. **JOB ID:** 25088523 **Job Locations:** United States, KY, Bowling Green, KY **Contact information for application-related questions:** ***************************** Please do not use this email address for sending your application or CV. To apply, please click on the "Apply for this role" button below. Applications sent via e-mail will not be accepted. **Application Deadline:** As long as the vacancy is listed on our Career Site, we are happy to receive your application **Job-Center:** If you have an application already, you can create or log in to your accounthere (******************************************************************************************************************************************************** to check the status of your application. In case of new account creation, please use your email address that you applied with. Activate external content When clicking the button below external content will be loaded which involves transfer of personal data (e.g. IP address) to external servers. This may involve that cookies are set by the external content provider. Please see Data Protection Statement for further information. **Accept for all YouTube content** Deactivate loading external content from YouTube. How is work at Henkel

Job Description The rate is $18-$24/hour range. involves processing various materials for the lamination process. job includes slitting, rewinding, and waste removal of laminated stock, war materials, or printed rolls. Attention to detail to make quality products. ESSENTIAL DUTIES AND RESPONSIBLITIES Load and unload rolls of stock to be processed. Remove questionable material and splice web (in register if necessary.). Hit production targets. Troubleshoot Machine and make adjustments. Trim material to the proper slit width to include the set-up for various widths. Perform quality check and enter data in the Infinity database. Cross train in other areas as needed. QUALIFICATIONS Minimum of High School Diploma. Experience running slitter machine or lamination machine

Job Title: Mixing Operator, Weekend Shift (Friday through Sunday, 6AM to 6:30AM, plus overtime) Reports to: Production Supervisor Department: Production The Chemical Compounding Operator operates, adjusts, and changes over chemical equipment involving such operations as weighing, measuring, mixing, and filtering liquids and solids to prepare batches of product from established recipes. Observes and reports occurrences in compounding, obtains samples for approval, corrects batches as instructed to maintain quality standards, moves materials and totes, and assists in cleaning equipment and area. Maintains appropriate documentation. Notifies supervisor of process, raw material or finished product deviations. Performs compounding tasks using established work instructions and SOPs. Ensures the even flow of the quality approved mixed compound throughout the manufacturing process must be self-driven and demonstrates a commitment to safety, manufacturing excellence, and quality. Responsibilities will include making batch mixes and transferring products into totes. Stages totes on racks to supply mixes to production lines. Duties: * Receive and check all incoming solvents for purity and quality specifications. * Check raw materials for contamination, weigh and mix raw materials as specified on the formulations/instructions. * Inspect scales for accuracy and operate equipment according to standard procedures. * Visually check mixing consistency of each batch, report inconsistencies, unusual conditions, or any process changes/problems to the Compounding Supervisor. * Load raw materials and solvents into mixer and mix in accordance with schedule and related work instructions. * Monitor mixing conditions and adjust setup as needed for mixing purposes. * Ensure mixer is clean of material buildup for changeovers to other materials. * Keep mixer chamber clean between batches. * Maintain cleanliness in the mixing area after every batch to prevent contamination. * Maintain efficient flow of machines to minimize production loss. * Report any problems immediately to supervision and participate in solutions to those problems. * Safety is a personal responsibility; verify that area and equipment are safe before proceeding with duties. * Check all safety equipment; follow all facility safety rules and procedures; wear all personal protective equipment (PPE) required. * Lock-out/Tag-out procedures must be adhered to when equipment is down for repair or cleaning. * Ability to clean tools and maintain identified tool boards while keeping workstation and surrounding area clean and organized. * Keep equipment in safe operating condition, report problems to Maintenance department. * Participate in training of new Associates as directed by the Supervisor. * Pump off each approved batch mixes into totes. * Stage totes for production as needed. * Be accountable for scrap, quality, production goals, housekeeping, and safety. * Promote a culture where safety becomes everyone's core value and working in a safe manner and adhering to the safety guidelines. * Strive for compliance excellence in environmental, health, safety and quality and ensure that best practices are being followed to minimize waste. * Ensure each and every compound mix meets quality specifications. * Participate in continuous improvement. * Effectively communicate with production filling department. * Maintain 5S in the mixing area. * Be on the spill clean-up crew. * Other duties as assigned. Competency: To perform the job successfully, an individual should demonstrate the following competencies: Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even with dealing with emotional topics. Project Management - Develops project plans; completes projects on time and budget. Interpersonal - Focuses on solving conflict, not blaming; Keeps emotions under control; Remains open to others' ideas and tries new things. Change Management - Communicates changes effectively; Builds commitment and overcomes resistance; Monitors transition and evaluates results. Managing People - Takes responsibility for subordinates' activities; Makes self-available to staff; Provides regular performance feedback. Motivation - Sets and achieves challenging goals; Demonstrates persistence and overcomes obstacles; Measures self against standard of excellence. Quality Management - Looks for ways to improve and promote quality. Safety and Security - Observes safety and security procedures; Reports potentially unsafe conditions; Uses equipment and materials properly. Qualifications: To perform the job successfully, and individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/ Experience - High School Diploma; or 3 to 5 years related experience and/ or training; or equivalent combination of education and experience. Language Ability - Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Mathematical Ability - Ability to calculate figures and amounts such as discounts, interests, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. Reasoning Ability - Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Computer Skills - To perform this job successfully, an individual should have knowledge of Spreadsheet, word processing, Database software, and E-mail Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to work near moving mechanical parts; fumes or airborne particles; extreme cold (non-weather) and extreme heat (non-weather). The noise level in the work environment is sometimes loud. Good cooperation and collaboration skills. Good organizational skills with the ability to handle multiple tasks and meet tight deadlines. High degree of concentration with attention to detail, high energy and self-motivated. Ability to manage demands and deal with frequent changes, delays, or unexpected events through organization, prioritization, and problem-solving skills. Ability to interact well with all personality types. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must frequently lift and /or move up to 50 pounds. While performing the duties of the job, the employee is regularly required to walk and talk or hear. The employee is frequently required to stand; sit and use hands to fingers, handle, or feel; the employee is occasionally required to reach with hands and arms. Training - Hazwoper 24 hour

Fluidra is seeking a Machine Operator - Rotomolding Technician to join the team at our S.R. Smith office in Portland, TN. PRIMARY PURPOSE Will be responsible for their assigned area including roto molding oven, employees assigned to their area, production schedules, production supplies, cost controls and safety. ESSENTIAL DUTIES AND RESPONSIBILITIES Oversee daily operations of assigned rotational molding machine and oven. Ensure operating and quality standards are met for all product produced in assigned area. Provide safety and operational training to employees in assigned roto molding area. Offer recommendations to improve production processes for better time management and quality work habits. Will be back up for Roto Molding Technician II when they are absent. OTHER DUTIES AND RESPONSIBILITIES Performs other duties as assigned. MINIMUM QUALIFICATIONS AND EXPERIENCE High School graduate or equivalent preferred. 3 Years experience with Roto Molding or similar role in a manufacturing environment. Quality control experience is preferred. Roto molding machine, personal computer (including word processing and spreadsheet software), calculator, scales, and measuring devices. WHAT WE OFFER An exciting opportunity to dive in and begin your career with a company that offers a competitive total rewards package that includes: 2 weeks of paid vacation (accrued biweekly, prorated if hired during the year) 1 week of sick leave 11 company paid Holidays Full range of health benefits including medical, dental & vision, short & long-term disability 401(K) matching (100% of first 3% contributed, 50% of the next 2%) Health and wellness programs / gym reimbursement Educational assistance up to $7,000 per year Company sponsored FUN events! Generous product discounts Position starts at $20.00/ hour. Fluidra offers a comprehensive total rewards / benefits program that includes base salary, annual bonus based on performance of individual and company objectives, competitive 401K matching, paid vacation and sick time, full range of health benefits, educational assistance, etc. The actual salary offer will carefully consider a wide range of factors, including skills, qualifications, experience and location. Your recruiter will provide additional details on our compensation and total rewards program. WHY WORK FOR FLUIDRA? We're an industry‐leading, global company with a legacy of innovation. Offering an extensive array of quality‐designed pool and spa equipment, our portfolio includes some of the most trusted brands in the business: Polaris , Jandy , CMP, S.R. Smith, and Zodiac . We also sell products under the Cover‐Pools , iAquaLink , Grand Effects , Dell and Nature2 names. Recognized as the foremost provider of reliable and visionary pool equipment, our reach extends worldwide across both the residential and commercial pool and wellness markets. We now have over 7,000 employees, a presence in over 45 countries and the combined resources to accelerate innovation in critical areas like energy-efficiency, robotics and the Internet of Things. Our focus is on creating the perfect pool and wellness experience responsibly. We take our mission to heart, and our employees embody these guiding principles in everything we do: passion for success, honesty & trust, customer collaboration, teamwork and inclusion, learn and adapt, excellence and innovation. Don't know if you meet every single requirement listed? At Fluidra, we thrive on building a diverse and inclusive workspace, so if you are excited about this role and your past experience doesn't align perfectly, we encourage you to apply anyways! While your experience may not effectively meet the requirements for this role, there may be another role in the organization that does better align with your experience and background. Fluidra is proud to be an equal opportunity employer. Fluidra recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, sex, disability, age or veteran status. #zip

This full-time, first-shift role follows a Monday-Thursday schedule, includes benefits, and offers opportunities for career growth within one of Tennessee's Top Workplaces for nine of the past ten years. The Des-Case products manufactured here are shipped worldwide to support customers globally. Des-Case seeks a dependable individual who enjoys hands-on work and thrives as part of a dynamic, highly collaborative team. Position Expectations: Safely and efficiently handling, working on, and operating line equipment and other manufacturing equipment. Light assembly of contamination control products. Support quality control procedures. Maintain position responsibilities with good organization skills. Detail-oriented, self-starter capable of working alone and on a team. Able to lift 40 pounds unassisted. Background Requirements: High school diploma or equivalent. Basic computer and math skills. Some previous work-related skill, knowledge, or work experience preferred. About the Company: Des-Case Corporation (a Timken company), headquartered in Goodlettsville, Tennessee (greater Nashville), is a leading provider of reliability solutions for industrial equipment, specializing in contamination control, lubrication, and predictive maintenance. Des-Case products are manufactured in Goodlettsville and shipped around the world. With a history dating back to 1983, we've consistently been recognized as one of Tennessee's Top Workplaces, earning this distinction nine times in the last ten years. Our trademarked and patented solutions are distributed globally through a vast network, including private label distributors and OEM partners, benefiting some of the world's largest companies. For more visit us at descase.com. Start a Career with Des-Case: ******************************************* Notes: The statements herein are intended to describe the general nature and level of work performed by employees, but does not represent a complete list of responsibilities, duties and skills required of personnel so classified. Furthermore, the statements herein do not establish a contract for employment and are subject to change at the discretion of the employer.

Manufacturing, innovation, and happy pets too. We are excited to announce that we are looking for a Production Operator: Freeze Dry - Weekend Shift to join our rapidly growing company. With thirty years of growth in the global pet food sector, our ORIJEN and ACANA brands define our vision of being The Global Leader in Advancing Premium Food for Pets. If you are passionate about personal and professional growth and see yourself as a key player contributing to our continued success by working in our award-winning company - we would love to hear from you. Summary We have a Production Operator position-Freeze Dry. This position is a weekend shift. These positions require demonstrated mechanical and technical skills necessary to operate the equipment safely and efficiently. These positions play a critical role in continuous improvement through identifying both equipment and procedural changes. Responsibilities Confer with the Supervisor and/or Team Leader to determine scheduled production runs and associated mixing or packaging requirements. Perform daily inventory of all dry and fresh ingredients and accurate recording of levels. Unloading of trucks including proper receiving and inventory transactions. Operate heavy machinery including grinding equipment for fresh meats and ingredients, and/or automated and manual packaging equipment in a safe and efficient manner. Develop and maintain successful professional working relationships, including good communication practices with relevant production department staff. Participate in annual physical inventory as determined by the Company. Maintain a neat and organized work area according to established corporate policies, procedures, and safety regulations. Perform other work assignments, as requested or required. Requirements High school diploma or GED. Minimum 2-3 years' experience in a manufacturing environment, or equivalent military experience, or college degree. 2-3 years' experience operating food processing machinery is preferred. Mechanical aptitude and adept with tools and equipment, including ability to accurately complete required paperwork. Demonstrated leadership skills and interpersonal skills with ability to work successfully both independently and as a part of a team. Ability to communicate effectively, both verbally and in writing. Willing to work any shift as necessary. Willing to work overtime as necessary or required. Benefits Top out on 1-year anniversary Medical, Dental and Vision benefits start Day 1 Three weeks' vacation Annual Bonus Program Company match 401k Free premium pet food Uniforms, safety footwear and PPE provided Tuition Reimbursement On the Job training Climate Controlled, state-of-the-art manufacturing facility Come as you are. We value diversity in all forms and know the power it can bring. Workplace equality allows for creative ideas to bloom, diverse points of views to be heard, and increases overall happiness. That sounds pretty good to us. Champion is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, national origin, sexual orientation, gender identity, disability, age, veteran status, or any other status protected by applicable law. The base pay range for this position at commencement of employment is expected to be between the range listed above, however, base pay offered may vary depending on multiple individualized factors, including but not limited to, market location, job-related knowledge, skills, and experience. The total compensation package for this position may also include other elements, if eligible, including variable pay, medical and dental benefits, participation in 401k plan, and paid time off benefits. Eligibility for these additional elements depend on the position offered and the employee's work schedule (i.e., part-time schedule, store associate). Details of participation in these benefit plans will be provided if an applicant receives an offer of employment.

Summary/Objective The Team Member position is to ensure that quality parts are being finished and that any non-conforming parts are reported and removed for disposition. They will also contribute to a work environment where fairness, equality and non-discriminatory practices are the standard. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Following the job instruction provided by the Group Leader. Meeting daily job assignment standards. Ability to rotate within the assigned work station in a line or within other lines. Immediately inform the Group Leader/Team Leader of any visual and/or physical defects in production pieces that appear at your work station. Reference operation instructions. Trim pieces without creating any defects. Perform additional trimming of flash to enable a part to meet customer standard and requirements. Ensuring that no defective pieces are packed. Record any non-conforming parts on the productive reports. Ensuring all conforming parts are correctly packed according to packaging standards. Ensure that all aspects of his or her area of responsibility is in full compliance with the quality system in place at the operation at all times. Ensure there are no quality or production interruptions due to lack of giving or seeking information by fully informing the Production Manager of all events affecting production and the shift. Maintain a productive working environment by good communication, cooperation, positive habits and attitudes. Record information on scrap sheets and/or downtime sheets regarding scrap parts, and information about machine, equipment and fixture problems. Follow company safety rules 100% of the time. Reading, understanding and complying with company safety rules as designated by the YAPP USA Automotive Systems, Inc. Employee Handbook and outlined by the Job Safety Guide. Take action to promptly correct or remove all workplace hazards and unsafe work conditions. Competencies Problem Solving/Analytical Technical Skills Communication Proficiency, written and oral Attendance/Punctuality Dependability Ethical Conduct Supervisory Responsibility This position as no supervisory responsibilities. Work Environment This job operates in a manufacturing environment. While performing the duties of this job, the employee is frequently exposed to work near moving mechanical parts. The noise level in the work environment is usually moderate. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands to grasp small items, handle, or feel; and reach with hands and arms. (See attached pages for physical requirements.) Summary/Objective The Team Member position is to ensure that quality parts are being finished and that any non-conforming parts ate reported and removed for disposition. They will also contribute to a work environment where fairness, equality and non-discriminatory practices are the standard. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Following the job instruction provided by the Group Leader. Meeting daily job assignment standards. Ability to rotate within the assigned work station in a line or within other lines. Immediately inform the Group Leader/Team Leader of any visual and/or physical defects in production pieces that appear at your work station. Reference operation instructions. Trim pieces without creating any defects. Perform additional trimming of flash to enable a part to meet customer standard and requirements. Ensuring that no defective pieces are packed. Record any non-conforming parts on the productive reports. Ensuring all conforming parts are correctly packed according to packaging standards. Ensure that all aspects of his or her area of responsibility is in full compliance with the quality system in place at the operation at all times. Ensure there are no quality or production interruptions due to lack of giving or seeking information by fully informing the Production Manager of all events affecting production and the shift. Maintain a productive working environment by good communication, cooperation, positive habits and attitudes. Record information on scrap sheets and/or downtime sheets regarding scrap parts, and information about machine, equipment and fixture problems. Follow company safety rules 100% of the time. Reading, understanding and complying with company safety rules as designated by the YAPP USA Automotive Systems, Inc. Employee Handbook and outlined by the Job Safety Guide. Take action to promptly correct or remove all workplace hazards and unsafe work conditions. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Competencies Problem Solving/Analytical Technical Skills Communication Proficiency, written and oral Attendance/Punctuality Dependability Ethical Conduct Supervisory Responsibility This position as no supervisory responsibilities. Work Environment This job operates in a manufacturing environment. While performing the duties of this job, the employee is frequently exposed to work near moving mechanical parts. The noise level in the work environment is usually moderate. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands to grasp small items, handle, or feel; and reach with hands and arms. Position Type/Expected Hours of Work This is a full-time position, and hours and days of work are determined by their shift. Working overtime and/or weekends may be required as necessary. Travel Travel is not expected. Required Education and Experience High School Diploma or GED Preferred Education and Experience Six months experience in a manufacturing environment. Additional Eligibility Qualifications Adaptability Quality Good Safety Record Teamwork Work Authorization/Security Clearance 1. Must have valid working documents to work in the United States. AAP/EEO Statement To provide equal employment and advancement opportunities to all individuals. Employment decisions at YAPP USA will be based on merit, qualifications and abilities. Employment decisions shall comply with all applicable federal, state and local laws prohibiting discrimination or harassment in the workplace. YAPP USA does not discriminate in employment opportunities or practices on the basis of race, color, religion, sex, national origin, age, disability, weight, height, familial status, veteran status, or any other characteristic protected by law.

Benefits: Company parties Paid time off Training & development Do You Have What It Takes to Be a Hero Every Day? Are you someone who thrives on adrenaline and the satisfaction of saving the day? Are you ready to step up to new challenges and lead a dynamic team in the fast-paced world of emergency mitigation? If so, we have the perfect opportunity for you! Position: Mitigation Production Technician Why You'll Love Working with Us: Join Our Elite Squad: We're not just a team; we're a family dedicated to making a difference. As a Mitigation Technician , you'll lead from the front, tackling water, fire, and mold restoration with precision and care. Stay Ahead of the Curve: Use cutting-edge technology like Docusketch for 3D imaging, and get hands-on with the latest tools and equipment. Your role is pivotal in ensuring our clients' properties are restored quickly and efficiently. Make an Impact: Every day brings a new challenge, and your expertise will help families and businesses recover from disasters. Your leadership and skills will turn chaos into order, providing peace of mind to those in distress. What You'll Be Doing: Control the Scene: Install containment and safety mechanisms, and establish drying protocols with top-notch equipment. Customer Champion: Deliver excellent customer service and secure positive client reviews. Emergency Response: Be ready to jump into action with emergency cleaning, sanitizing services, and controlled demolition when needed. What We're Looking For: Skills: Exceptional communication, customer service, and problem-solving abilities. Physical Stamina: Ability to handle physical demands, including lifting up to 20 pounds and working in various environments. What's In It for You: Competitive Pay: Earn an hourly wage with opportunities for overtime and bonuses. Growth Opportunities: We invest in our team members' development and career progression. Dynamic Environment: No two days are the same in this high-energy, rewarding role. Supportive Team: Work with a group of dedicated professionals who are passionate about what they do. Ready to Join Our Mission? If you're a proactive, detail-oriented leader with a passion for helping others, we want you on our team. Take control of your career and make a real difference in people's lives. Apply now to become our next Mitigation Production Technician! ‼️NO EXPERIENCE REQUIRED‼️ Compensation: $17.00 - $19.00 per hour Serving Southern Kentucky and Northern Tennessee, the SKY Restoration DKI team has been helping customers restore their properties after disasters of all sizes since 2017. Working with both residential and commercial clients, we understand our customers' need for fast, reliable service to get back to work and their everyday lives. As a result, we pride ourselves on employing the finest team in your area to not only restore your property to pre-loss condition, but to also restore your life. We provide expert knowledge on fire, water, mold, storm damage, roofing, reconstruction, and more. Our goal is to provide top-notch customer service no matter the size of the job.

TITLE Production Technician REPORTS TO Area Leader/Team Leader Work in a variety of areas, in production and packaging, to produce product for the company. KEY RESPONSIBILITIES * Follow all company Safety Rules and Good Manufacturing Practices (GMP's). * Produce high quality products in a safe and healthful manner. * Assigned shift attendance is required. * To work in all areas of production and packaging, as assigned, which includes operating, being in close proximity to and crossing platforms over machinery. * Ability to work as part of a team. * Assist fellow employees as needed. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each duty and responsibility satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the duties and functions of the position. EDUCATION and/or EXPERIENCE High-school degree or equivalent is required. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, GMP's and general instructions. Good communication skills are required. REASONING ABILITY Ability to apply common sense understanding to carry out both oral and written instructions. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions and duties of this job. Reasonable accommodations may be made to enable individuals with disabilities. * While performing the duties of this job, the employee is regularly required to stand and lift. The employee is required to stand and walk at minimum 70% of the time. * The employee must be able to work 12 hour rotating shifts. * The employees must occasionally lift/push/pull or carry up to fifty (50) pounds, and should be able to lift 30-35 pounds on a frequent basis. * The employee must be able to squat or kneel and to bend on a frequent basis. * The employee must be able to work in a cold (40-50 degree) environment. * The employee must be able to tolerate exposure to flour and yeast materials. * The employee must be able to climb steps on a frequent basis. VISION Employee is required to have a minimum of 20/40 vision in each eye with or without corrective lenses. The applicant must pass a standard eye exam. SAFE PERFORMANCE REQUIREMENTS Employee must have the ability to perform the essential job functions identified above consistent with safety standards and practices with or without a reasonable accommodation. WORK ENVIRONMENT The work environments characteristics described here are representative of those an employee encounters while performing the essential duties of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate to high.

Job Description Join the TA team and work with our esteemed clients as a Machine Operator.Must be hands-on, detail-oriented, and ready to keep production running smoothly always ensuring top quality products are produced. We're looking for a skilled Machine Operator to set up, operate, and maintain machinery in a fast-paced environment. Benefits: Health, dental and vision insurance Referral Bonuses Life insurance Performance based increases Top out at $26.40 per hour What You'll Do: Operate and monitor machines to ensure top performance Conduct basic maintenance and troubleshooting Follow safety procedures and quality standards Keep records of production and machine performance What You Bring: Experience in machine operation (preferred but not required) Strong attention to detail and problem-solving skills Ability to work independently and in a team Commitment to workplace safety Math Skills required Why Join Us? Growth opportunities, great team culture, and the chance to work with cutting-edge equipment. Apply Now! Don't miss this opportunity to be part of a high-performing team.

Job Description Responsible for operating various types of machines, and assembly stations in manufacturing operations. Operators will adhere to all safety, quality, inventory, policies, and production procedures. PRIMARY RESPONSIBILITIES 1. Adheres to company policies, standard operating procedures, quality, and safety Instructions. 2. Completes work orders on-time, and accurately records all daily production logs/forms. 3. Reads blueprints and work orders to determine product specifications, tooling instructions, assembling instructions, packaging instructions, and plans operational sequences. 4. Understands correct parts related to job, and checks for correct gauge, and dimensions. 5. Completes first piece inspection ticket at the start of each shift or changeover. 6. Responsible for quality control and continues inspection for defects. Adjust equipment as necessary to produce product within specifications. Inspects quality of finished assemblies. Rejects product outside of specifications and follow non-conforming and scrap procedures. 7. Ensure material is properly identified prior to moving and after moving. 8. Execute transactions within ERP utilizing bar code scanners, tablets, or computers. 9. Ensure proper placement of tools and perform required routine daily maintenance. 10. Monitor and report status of equipment and assist with all changeovers. 11. Keep work place safe, clean, organized and communicate progress with other shifts. 12. Perform other duties as assigned. Powered by ExactHire:189547

PIC North America, a Genus Company, invites you to be part of something bigger. We are looking for passionate individuals to join us as Swine Care Technician at our location in Franklin, Kentucky. If you're excited about contributing to the future of agriculture, working with animals, and being part of a global leader in swine genetics, this role is perfect for you. Help us transform the way the world nourishes itself by ensuring the health and care of our top-performing animals. The Swine Care Technician is at the heart of PIC's operations, with a hands-on role in maintaining the highest standards of animal health and welfare on our farms. You Will * Entry-level position with limited prior training or relevant work experience * Work as a team player by accomplishing daily department work requirements and farm goals * Daily animal husbandry tasks * Maintain accurate and timely production information and records as required * Assist in moving animals and maintaining efficient animal flows * Treat sick animals with a variety of pharmaceuticals by injection, oral application, and/or other methods as required * Assist with maintaining barn, including sanitizing and washing multiple areas on the farm using high pressure equipment, as well as office cleanliness and laundry duties * Flexibility with a willingness to change plans according to the direction of farm leadership * Adhere to the Company's animal care policies and procedures including: providing a physical environment that meets the animal's needs, providing access to adequate water and high quality feed, providing humane treatment of the animals, providing identification and appropriate treatment of animals in need of health care and following the guidelines for euthanasia * Read and understand the company's emergency notification process and how it applies to their specific worksite * Abide by all company policies, procedures and guidelines as directed by farm leadership, including but not limited to: * The Company's Safety Program, understanding all safety requirements of the job and performing the job in compliance with those safety requirements * The Company's bio-security protocols * All environmental laws and procedures as well as report all environmental issues immediately to supervisor Requirements * Previous livestock handling, preferred * Ability to work both autonomously and within a team environment * Ability to follow instructions and deal with standardized situations * Ability to work in and maintain performance expectations in a fast-paced environment * Work requires attention to detail and ability to meet deadlines * Minimal, if any travel Business Overview Genus strives to provide beef, dairy and pork producers with superior breeding stock to enable the production of affordable and nutritious animal protein for consumers. PIC is the swine division with a mission to pioneer animal genetic improvement to help nourish the world. PIC currently supplies over 70% of the world's top pork producers. We directly employ people in 18 countries worldwide and our products are available in more than 50 countries across the globe. We are a diverse team, ranging from scientists to sales teams, production personnel to customer service, and are all united by a passion for producing nutritious, affordable pork and a commitment to continuous improvement. Equal Employment Opportunities Genus is an equal opportunity employer. In accordance with anti-discrimination law, it is the purpose of this policy to effectuate these principles and mandates. Genus prohibits discrimination and harassment of any type and affords equal employment opportunities to employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. Genus conforms to the spirit as well as to the letter of all applicable laws and regulations.

Interested in a CAREER and not just a “job”? Join the Cavco Lafayette Team as a PRODUCTION HOME ASSEMBLER with starting pay of $18.00 per hour + Production Bonus after training! Complete an application (either online or in person at 739 HWY 52 Bypass W in Lafayette, TN.) and begin your career building a family's custom home! Experience preferred but not required. If you are eager to learn, we will train the “right person”. The Production Home Assembler follows work orders and instructions in order to accurately and efficiently prepare and assemble building components and homes in a factory assembly line environment. Essential Duties and responsibilities: Operate various hand tools, power tools and equipment used to complete carpentry duties including: Circular Saw Table Saw Router Pneumatic Nail Gun (roofing, framing and finish work) Drills And other tools needed for measuring, cutting, fastening, and drilling Cabinet and or finish carpentry and trim, build and installation CNC machine experience preferred Cooperate and promote a team concept with all other company employees Adhere to all rules and regulations, at all times Meet or exceed company safety standards Perform other tasks as assigned by management Minimum Qualifications: Must be at least 18 years of age Must be legally authorized to work in the United States Be able to read, write, and speak English High School diploma, preferred Knowledge, Skills and Abilities: Ability to read a tape measure Possess basic construction knowledge and comfortable using basic tools Excellent attention to detail Ability to read blueprints, a plus Ability to work in a fast-paced environment and multi-task Ability to trouble shoot and problem solve in a high-volume Versatility and willingness to transfer into various departments when necessary You must be able to communicate efficiently and clearly with other Team Members Working conditions: Continuous exposure to heat, cold, noise, and working outdoors. Must wear protective equipment while at the location Physical requirements: Requires walking, sitting, lifting, pushing, pulling and climbing to a significant degree Heavy Work-Exerting up to 50 pounds of force occasionally, and/or up to 20 pounds or force frequently, and/or up to 10 pounds of force constantly to move objects While performing the duties of this job, the employee is regularly required to talk and hear, in order to communicate to employees as well as function safely around construction equipment Disclaimer: “This is intended to provide general information about the position. It is not an employment contract. As with all positions, the responsibilities and duties of this position may change. The company, in its discretion, may alter this job description at any time with or without notice.” EEO/AA Statement: Cavco Industries Inc., and all of its Subsidiaries are an EEO/AA (equal opportunity/affirmative action) institution and does not discriminate on the basis of sex, age, race, color, religion, physical or mental disability, creed, national origin, veteran status, sexual orientation, genetic information, gender identity, or gender expression in the programs or activities which it operates.

PIC North America, a Genus Company, invites you to be part of something bigger. We are looking for passionate individuals to join us as Swine Care Technician at our location in Franklin, Kentucky. If you're excited about contributing to the future of agriculture, working with animals, and being part of a global leader in swine genetics, this role is perfect for you. Help us transform the way the world nourishes itself by ensuring the health and care of our top-performing animals. The Swine Care Technician is at the heart of PIC's operations, with a hands-on role in maintaining the highest standards of animal health and welfare on our farms. You Will Entry-level position with limited prior training or relevant work experience Work as a team player by accomplishing daily department work requirements and farm goals Daily animal husbandry tasks Maintain accurate and timely production information and records as required Assist in moving animals and maintaining efficient animal flows Treat sick animals with a variety of pharmaceuticals by injection, oral application, and/or other methods as required Assist with maintaining barn, including sanitizing and washing multiple areas on the farm using high pressure equipment, as well as office cleanliness and laundry duties Flexibility with a willingness to change plans according to the direction of farm leadership Adhere to the Company's animal care policies and procedures including: providing a physical environment that meets the animal's needs, providing access to adequate water and high quality feed, providing humane treatment of the animals, providing identification and appropriate treatment of animals in need of health care and following the guidelines for euthanasia Read and understand the company's emergency notification process and how it applies to their specific worksite Abide by all company policies, procedures and guidelines as directed by farm leadership, including but not limited to: The Company's Safety Program, understanding all safety requirements of the job and performing the job in compliance with those safety requirements The Company's bio-security protocols All environmental laws and procedures as well as report all environmental issues immediately to supervisor Requirements Previous livestock handling, preferred Ability to work both autonomously and within a team environment Ability to follow instructions and deal with standardized situations Ability to work in and maintain performance expectations in a fast-paced environment Work requires attention to detail and ability to meet deadlines Minimal, if any travel Business Overview Genus strives to provide beef, dairy and pork producers with superior breeding stock to enable the production of affordable and nutritious animal protein for consumers. PIC is the swine division with a mission to pioneer animal genetic improvement to help nourish the world. PIC currently supplies over 70% of the world's top pork producers. We directly employ people in 18 countries worldwide and our products are available in more than 50 countries across the globe. We are a diverse team, ranging from scientists to sales teams, production personnel to customer service, and are all united by a passion for producing nutritious, affordable pork and a commitment to continuous improvement. Equal Employment Opportunities Genus is an equal opportunity employer. In accordance with anti-discrimination law, it is the purpose of this policy to effectuate these principles and mandates. Genus prohibits discrimination and harassment of any type and affords equal employment opportunities to employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. Genus conforms to the spirit as well as to the letter of all applicable laws and regulations. Receive email notifications about our latest career opportunities, news and updates directly to your mailbox. Click here to sign up.

Job Description The Machine Operator/Packer will be responsible for the operation of the various machines, while maintaining a safe, clean, and organized work environment for maximum efficiency and production quality. Completes responsibilities in accordance with the organization's policies and procedures, and applicable laws. The primary responsibility for this roles is nesting springs into wire baskets preparing them for heat treat. Other times, the Operator may be moved about the production floor to assist in other areas. DESCRIPTION OF DUTIES AND RESPONSIBILITIES: Operate and maintain various machines (both mechanical and or Computer Numerically Controlled) to established standards and working order. Meet productivity standards. Troubleshoot issues with quality or productivity related to the team or the machine. Suggest improvements to processes or procedures. Coordinate with personnel, Team Leader and Engineering for issues and improvements. Actively participate in risk assessment activities for their area of responsibility. Actively participate in incident investigations, root cause analysis and support implemented corrective actions. Understand and fully utilize all ISO procedures. Participate in safety observation programs as required. Complete required documentation such as: patrols, housekeeping sheets, etc. Perform 5S and other housekeeping duties required for a clean and safe work environment. Train others as needed. Create and maintain a team effort attitude and team approach within the department and plant. Packaging Measuring parts with gauges and calipers Use and record production and print labels through Plex, etc. Occasionally wire feed machine during coil changes. Process will need to be learned. Additional duties as assigned. JOB SKILLS: High School Diploma or equivalent preferred 1-3 years manufacturing experience preferred. Perform basic mathematical calculations quickly and accurately. Ability to be on time, dependable and reliable. Ability to pay close attention to detail with problem solving skills. Ability to stand and be in motion throughout the shift. Must have basic computer skills. Must be able to work independently. Ability to multi-task Ability to lift 40-50 lbs.

Temp To Full-Time Job Title: Machine Operator Why You'll Love Working Here Step into a hands-on role with competitive pay, full benefits, and a clean, safety-first workspace. Discover a job that fits your life-and your future-today. What's In It for You Steady, Weekly Pay: Get rewarded on your schedule. Comprehensive Benefits: Health, dental, vision, life insurance, and paid time off. Team Bonuses: Celebrate shared success through referral and performance rewards. Smooth Onboarding: Direct deposit from day one-no waiting, no hassles. Your Impact As our Machine Operator, you are a key contributor to the quality and consistency of our production output. Every part you load, cycle you run, and product you inspect ensures we meet customer expectations with precision and efficiency. Your focus on safety, accuracy, and equipment performance helps drive smooth operations and keeps production moving forward without delay. What You'll Do • Operate Machinery: Set up, run, and monitor production machines according to job specifications and safety standards. • Inspect & Measure: Perform in-process quality checks, identify defects, and ensure products meet specifications. • Maintain Production Flow: Keep machines running efficiently by refilling materials, clearing jams, and minimizing downtime. • Perform Basic Maintenance: Clean and maintain machines daily, reporting any mechanical issues to the supervisor. • Read Instructions: Follow blueprints, work orders, or written instructions to complete production tasks accurately. • Document Work: Record production counts, scrap, and downtime clearly and accurately. • Champion Safety: Adhere to all safety protocols, including the use of PPE and machine guards, to maintain a safe work environment. Ready to Jump In? TA Staffing is an E-Verify, Equal Opportunity, Drug-Free Workplace. We move fast, reward hard work, and invest in your success. 16.00