Production operator jobs in Charleston, SC

OpSource Pro has partnered with a paint manufacturer in Charleston, SC. $19 - $21.50/hr. Hours: 9am - 6pm Role Responsibilities: Full compliance for all applicable laws and regulations pertaining to department and job functions. Quality management as well as adherence to all company policy and procedure. Must be a self-starter with the ability to work with minimum supervision. Ability to plan, organize, coordinate and sort priorities in order to achieve timely quality results. Proper use of department technology and technique in accordance to applicable Work Instructions. Use of the systems and tools (e.g. mixing equipment, scales) including cleaning and maintenance as specified. Observation of the quality reporting to superior of any deviations throughout the production process. Adhere to daily work load and daily priority list. Effective internal communications within assigned team. Mandatory and proper use of internal computer programs (e.g. SAP). Lean Management / 5S. Pay attention to department work area and job functions reporting immediately all health and safety observations or opportunities as well as any other opportunities for improvement (e.g. work flow, processes). Maintain a clean, organized and efficient work area. Compliance with all company policies and procedures. Ability to perform all functions in Scratch-On and H/T, i.e. mixing, milling, filling, etc. Meet performance standards of the department (goals & objectives). Prioritize issues and manage time effectively, taking accountability for resolving production issues. Work well in a team and provide team members support and guidance when required. Share and implement best practices with other team members to enhance the quality and efficiency of the assigned area. Provide daily support in assigned area, ensuring accurate tracking of inventory levels. Ability to correspond with internal teams and external customers with dignity, respect and integrity while exhibiting the Mankiewicz Values at all times. Requires flexibility and understanding that this position may be required to perform duties outside the duties listed above in order to meet the mission and goals of Mankiewicz Coatings. Qualifications: High school diploma, GED or equivalent hours in a related work environment. Receive hazardous waste training within 6 months of initial employment, and annually thereafter in accordance with the applicable provisions of R.61-79.262.17(a)(7)(ii), (iii) and (iv)(D) of the South Carolina Hazardous Waste Management Regulations (SCHWMR). Excellent verbal and written communication skills, including ability to effectively communicate with internal and external customers . Experience with SAP software (preferred). Excellent computer proficiency (Microsoft Office - Word, Excel, Outlook and Powerpoint). Must be able to work under pressure and meet deadlines while maintaining a positive attitude and providing exemplary customer service. Ability to work independently and carry out assignments to completion within parameters of instructions given, prescribed routines and standard accepted practices. Physical Demands Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards. Ability to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state and local standards. Requires frequent walking, standing, heavy lifting and carrying, stooping, bending, kneeling and reaching. Exposure to fumes and hazardous chemicals. Must be able to wear a respirator and must pass annual respirator fit testing. Must be able to lift and carry up to 50 pounds. Able to stand for 8 hours per day. Must be able to understand directions as provided by the supervisor.

Production Technician - Injection Molding Reporting to: Manufacturing Supervisor - Injection Molding SHL Medical is the world-leading solution provider in the design, development, and manufacturing of advanced drug delivery systems with more than 5000 employees worldwide. Our customers include top pharmaceutical and biotech companies from around the globe that require innovative devices such as auto-injectors or pen injectors to effectively deliver their drugs. Headquartered in Switzerland since late 2018, with sites in Sweden, Taiwan, and the United States. Job Overview This role is embedded in Production / Injection Molding of our new state-of-the-art device manufacturing facility in North Charleston, South Carolina. For interested candidates there will be an opportunity to initially spend an extended period in our facility in Taiwan for induction/training. Main Responsibilities Operate and maintain Injection Molding/Automation equipment to achieve production goals. Set up, operate/process, maintain, monitor and control injection molding equipment including resin drying and conveying, injection molding machines, hot runners and molds, fluid temperature control systems and robot/automation Execution of production schedule to achieve production goals Maintain controlled areas and environmental monitoring in injection molding production Actively participate in production event response Review and author SOP's and other documents, as required Assist during equipment maintenance, including mold & robot end of arm & IMM restoration, predictive and preventative maintenance Ensure all event response and production operations activities are correctly documented in SAP Actively participate in Systematic Problem-Solving tools to establish Root Cause Analysis & resolve equipment issues Record/review production data and activities per SHL work instructions Follow all safety and environmental requirements in the performance of duties Support and implement system/equipment reliability improvement projects Other accountabilities, as assigned Required Qualifications High school diploma or equivalent required (AAS degree in related field preferred, or equivalent military training or industrial training or an equivalent combination of education experience 5+ years of relevant work experience Knowledge/experience in the following areas: crane operation, compressed air/pneumatic actuators and systems, electro-mechanical controls, robotics, optical sensor systems, resin drying, molds, fluid thermal control systems, hot runners and injection molding machines 2+ years proven track record in injection molding Demonstrated ability to support & actively participate in event response activities in highly automated / 24/7 production settings Able to document problems & works to bring them rapidly to solution Desired Qualifications Experience in an FDA regulated environment (medical, pharmaceutical, food) preferred Ability and experience with automated records systems such as SPC, MES, EWM, SAP Proficiency in reading schematics, wiring diagrams & other technical documents. Experience in planning/organizing work, managing execution, checking results & revising the work plan in accordance with the daily work plan Computer literacy Physical Demands Ability to move equipment and/or supplies weighing up to 50 pounds within the facility using various body positions Routinely operates and inspects manufacturing equipment using hands Ability to be on feet for up to a 12-hour shift Corrected vision to 20/30 Occasionally ascends/descends a ladder to service equipment; ability to work atop elevated positions Occasionally works around odorous and/or hazardous materials. May be required to wear latex gloves Occasionally positions self within confined spaces for inspection, repair and maintenance of equipment Ability to work in loud noise environments with hearing protection (Ability to attain clean room gowning certification and work with hazardous materials, including sanitants) Frequent bending, stooping and prolonged working overhead Ability to work the hours necessary to support a 24/7 continuous manufacturing operation We Offer Competitive compensation package Modern working environment with state-of-the-art facilities and technologies Challenging assignments in a fast growing and innovative industry Position in a dynamic, international team of highly skilled professionals Various opportunities for personal and professional development within a global organization

This position works under close supervision and is primarily responsible for performing all duties and tasks associated with one of the work cells listed below, as assigned by plant management, while adhering to quality standards according to GMP, sanitation and safety procedures. Knowledge of the SAP functions listed below must also be mastered. PRINCIPAL DUTIES AND RESPONSIBILITIES 1. * Sets- up (assembles and disassembles), operates, adjusts and cleans equipment to produce color products and packages these finished goods according to quality, GMP, safety and sanitation standards. Operations may include blending, filling and packing procedures. 2. * Locates, prepares, transfers and loads materials to be processed; transfers WIP or finished product to filling operation, additional processing operations, storage or shipping area. 3. * Prepares packing materials (drums, pails, boxes) and packaging labels and stacks or stages containers for transfer. 4. Draws samples and takes to QC lab for testing per product specifications. Confers with lab technicians and supervisors and makes adjustments to the process to bring the product within specification. 5. Prints and applies labels to product. 6. Completes necessary paperwork or data entry for production/lab records and inventory levels. 7. Follows all GMP, safety, sanitation and quality specifications and procedures. KNOWLEDGE, SKILLS & ABILITIES 1. Ability to read, write and speak English. 2. Ability to apply basic mathematical concepts to the production process including conversion of weight and volume in the metric system. 3. Ability to read and follow a recipe for mixing and/or blending product. 4. Ability to operate a forklift. 5. Ability to use basic hand tools (hammer, screwdriver, wrench) for assembly and disassembly of equipment. 6. Ability to communicate effectively with co-workers regarding the status of the production process. 7. These characteristics are normally acquired through a High School Diploma or GED with experience in a production environment preferred. WORKING CONDITIONS Working environment is a production unit and includes frequent exposures to wet, humid, dusty, or loud conditions, moving machine parts, fumes or airborne particles and caustic chemicals. A company issued uniform is required to be worn along with personal protective equipment at all times. This can include coveralls, dust mask, hearing protection, hair/beard net, safety glasses, gloves, and safety shoes. Work may occur in small rooms with air lock compliance to avoid interdepartmental contamination. PHYSICAL DEMANDS While performing the duties of this job, the employee is frequently required to stand, walk, talk, hear, lift and/or move materials or equipment up to 50 lbs, use hands to finger, handle objects, tools or controls and roll bags, scoop, kneel, crouch or crawl and use foot/feet to operate machinery. Specific vision abilities required by this job include vision, color vision, depth perception and the ability to adjust focus. What We Offer: Comprehensive Health Coverage - Medical, Dental, and Vision Plans to support you and your family on your first day of employment 401(k) Retirement Plan with Employer Match - Plan for your future with company-supported retirement savings Paid Time Off - Enjoy a healthy work-life balance with PTO and 11 Paid Holidays Paid Parental Leave -Maternity and Paternity Leave so you can focus on what matters most Employee Engagement - Join our Engagement Team for fun events, volunteer opportunities, and ways to connect with colleagues across the company

Are you an Air Operations Center (AOC) Training Management professional looking for an opportunity to make a difference every day? Serco is the place for you! Discover this exciting opportunity supporting our USAFCENT program. United States Air Force Central Command (USAFCENT) is the Air Force Service Component of United States Central Command (USCENTCOM), a joint Department of Defense combatant command responsible for U.S. security interests in 27 nations that stretch from the Horn of Africa through the Persian Gulf region, into Central Asia. This position supports USAFCENT/609 AOC Detachment and works in coordination with the AOC training office and USAFCENT A2 training office to analyze and assess training program requirements for positions within the combat operations, combat plans, strategy, and intelligence, surveillance, reconnaissance divisions within the AOC supporting Air Force and joint/combined operations and exercises. This position provides assistance to improve, edit and author training material required to support the AOC Initial Qualification and Mission Qualification training conducted by USAFCENT. Review current and future training and exercise plans, AF instructions, and joint publications with the purpose of making recommendations on improving them as well as incorporating them into unit training programs. In this role, you will: Provide analytical performance assessments in support of positional verification and validation processes for the AOC systems when new upgrades or patches are in review. Provide feedback on AOC processes and functions in the operations, plans, strategy and ISR divisions when requested by AOC leadership. Provide technical advice for resource and configuration management, technical C4ISR, and modeling and simulation systems operations and maintenance. Provide input to and conduct classes in support of AOC training that will result in the combat mission ready certification of AOC personnel. (Permanent party and temporary duty). Coordinate with the AOC training office to schedule approximately 250 students annually to attend Mission Qualification Training conducted at Shaw AFB. Assist with developing reach back plans and coordinate system availability for expanded operations and exercises. Works with other services to incorporate service specific requirements within the AOC operating structure. Qualifications To be successful in this role, you will have: An active DoD Top Secret with SCI (TS/SCI) clearance Held or currently hold the rank of Officer in the US Air Force, Navy Or Marines Eight (8) years of experience in the US Air Force, Navy Or Marines One (1) year of experience in AOC strategy division OR have graduated intermediate/senior level service school OR have graduated Joint Air Operations Planning Course One (1) year of experience using Microsoft Office suite The ability to travel up to 25% of the time. US Citizenship If you are interested in supporting and working with our military and a passionate Serco team- then submit your application now for immediate consideration. It only takes a few minutes and could change your career! Company Overview Serco Inc. (Serco) is the Americas division of Serco Group, plc. In North America, Serco's 9,000+ employees strive to make an impact every day across 100+ sites in the areas of Defense, Citizen Services, and Transportation. We help our clients deliver vital services more efficiently while increasing the satisfaction of their end customers. Serco serves every branch of the U.S. military, numerous U.S. Federal civilian agencies, the Intelligence Community, the Canadian government, state, provincial and local governments, and commercial clients. While your place may look a little different depending on your role, we know you will find yours here. Wherever you work and whatever you do, we invite you to discover your place in our world. Serco is a place you can count on and where you can make an impact because every contribution matters. To review Serco benefits please visit: ************************************************************ If you require an accommodation with the application process please email: ******************** or call the HR Service Desk at ************, option 1. Please note, due to EEOC/OFCCP compliance, Serco is unable to accept resumes by email. Candidates may be asked to present proof of identify during the selection process. If requested, this will require presentation of a government-issued I.D. (with photo) with name and address that match the information entered on the application. Serco will not take possession of or retain/store the information provided as proof of identity. For more information on how Serco uses your information, please see our Applicant Privacy Policy and Notice. Serco does not accept unsolicited resumes through or from search firms or staffing agencies without being a contracted approved vendor. All unsolicited resumes will be considered the property of Serco and will not be obligated to pay a placement or contract fee. If you are interested in becoming an approved vendor at Serco, please email *********************. Serco is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics.

Job Description Job Title: Associate, Production Reports To: Manager, Manufacturing Charleston, SC FLSA Status (Exempt/Non-Exempt): Non-Exempt The Production Associate is responsible for the production and/or packaging of a variety of manufactured products. This is a support role for several areas within manufacturing, specifically the molding and BCM areas. The position requires knowledge of commonly used concepts, practices and procedures; and relies on instructions and pre-established guidelines to perform the functions of this job. Key Responsibilities: Production duties such as manual lifting, packaging, taping, labeling, and stacking raw materials and finished goods. Execute and document quality inspections per SOP. Report defective materials, process, equipment or questionable conditions to the department supervisor. Ensure work area and equipment are maintained in a clean and orderly condition. Follow prescribed safety and housekeeping regulations. Fork lift operation. Perform other duties as assigned. Education: High School diploma or GED from an accredited learning institution, or equivalent work experience Experience: 0-1 year prior related experience Minimum Requirements/Qualifications: Understand and follow basic verbal and written instructions Read, analyze and interpret written instruction Maintain production pace and standards Excellent organizational skills and attention to detail Possess basic mathematical skills: addition, subtraction, multiplication and division Basic knowledge of computer skills Certified or become certified in operation of forklift Ability to lift up to 25 pounds with reasonable accommodation Thrives in a fast-paced, collaborative environment, efficiently works under pressure, within deadlines or other time essential constraints Excellent communication skills, both written and verbal, to clearly and concisely communicate to all levels of the organization Strong work ethic and an ability to excel within a rapidly changing and growing organization This position has not been approved for Relocation Assistance. The above statements are intended to describe the general nature and level of the work being performed by people assigned to this job. They are not an exhaustive list of all of the duties and responsibilities associated with it. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, protected veteran status, or disability status.

Aufgaben Shape the future today. The world is changing. The question is, what will be our contribution to the outcome? We have set the pace in the field of mobility from the very beginning, and we will continue to do so. At Mercedes-Benz Vans, interdisciplinary teams are developing the mobility of tomorrow. Our goal is to make mobility safer, simpler, and more sustainable for people across the globe. Put your pioneering spirit to good use: This is your opportunity to make a contribution that extends far beyond your job title. At Mercedes-Benz Vans, we offer you the perfect environment for your professional and personal growth. Cutting-edge training and promising career opportunities will help you to foster and expand your professional skill set as well as your individual strengths. Think, try, and thrive with us in collaborative work environments that spark game-changing concepts. Responsibilities: * Inspect and verify spot welded joints of entire vehicle body as defined by quality standards * Inspect and verify stud presence, location, and torque welded to the vehicle body as defined by quality standards * Inspect and verify MIG/MAG welds of the entire body as defined by quality standards * Inspect and verify sealer/adhesive of the entire body as defined by quality standards * Inspect and verify laser welds/laser brazing of the entire body as defined by quality standards * Responsible for the control of the ultrasonic device and the test mode * Conduct special audits without inspection plan specification o Conduct ultrasonic inspection using ultrasonic probe according to quality standards for entire vehicle shell. o Conduct ultrasonic testing outside of normal test conditions in special cases o Conduct ultrasonic device testing to ensure proper function o Coordinate with maintenance to ensure the ultrasonic device's proper function * Use the ultrasonic tester to analyze spot-welded joints in reference to the inspection plan * Provide expert input to establish and modify testing plans. Act as a consultant while working with other departments to establish ultrasonic test parameters (e.g. locations, quantity of points, and amplitude) * Document, communicate and troubleshoot unsatisfactory ultrasonic tests with the appropriate department; decide if a physical inspection (with peel and/or chisel) is necessary * Communicate any daily information and any other relevant events during change of shift * Assist in the organization of teamwork * Participate in Continuous Improvement Program * Availability to work Weekends, Holidays and Shutdowns Qualifikationen Qualifications: Education * High School Diploma or GED and a minimum of 5 years of relevant automotive production experience * or- * Associate's Degree in a technical trade (NDT, material sciences, welding technology, industrial technology, etc.) and 2 years relevant automotive production experience Knowledge and Skills * Extensive experience with non-destructive structural testing * Knowledge of sheet metal processing and data processing * Certified Radiographic Interpreter preferred * Certified Welding Inspector preferred * Previous spot-welding experience preferred Hours of Work: Normal hours of work for first shift are currently Monday to Friday from 6:00am to 2:15pm, normal hours of work for second shift are currently Monday to Thursday from 2:10pm to 10:10pm and Friday from 2:10pm - 11:25pm, normal hours of work for third shift are currently Sunday from 8:50pm to 6:05am and Monday to Thursday from 10:05pm to 6:05am. Hours are subject to change based on the needs of the business. You may be required to work on 1st, 2nd, or 3rd shift for training purposes. We are all in for change. Are you too? Apply now. If you have experience in the above and are interested in joining an outstanding company we welcome you to apply. The division Mercedes-Benz Vans is world renown for quality and innovative products. Mercedes-Benz Vans, LLC ("MBV") is a plant in Ladson, South Carolina that produces Sprinter vans for the U.S. and Canadian market under the brand Mercedes-Benz. The midsize Mercedes-Benz Metris vans are also reassembled at this location. Mercedes-Benz Vans, LLC invested 500 million U.S. dollars in the construction of a new Sprinter production plant in addition to an expansion of the previous assembly operations. In September 2018, MBV officially opened its new plant, located next to existing operations in the North Charleston area. The MBV facility will provide up to 1,300 jobs by the end of the decade and is expected to create at least 600 additional jobs in the region through its suppliers. More than 30,000 Sprinters have been assembled in North Charleston and delivered to destinations in the U.S. since 2006. The U.S. is now the second largest market for Sprinter vans, after Germany. Mercedes-Benz Vans, LLC is committed to fostering an inclusive environment that appreciates and leverages the diversity of our team. We provide equal employment opportunity (EEO) to all qualified applicants and employees without regard to race, color, ethnicity, sex (including pregnancy, gender identity, and sexual orientation),age, national origin, religion, marital status, veteran status, physical or other disability, genetic information, or any other characteristic protected by federal, state or local law.

Salary: 1st Shift $19.00 2nd & 3rd Shift: $19.00 + $2.25 Shift Differential At Thorne, we work to deliver high-quality, science-backed solutions to empower individuals to take a proactive approach to their well-being. Each day begins with a mission to help others discover and achieve their best health. We count on our team members to challenge and push the boundaries to make that happen. At Thorne, you'll be joining a team of more than 750 passionate individuals committed to our cause of providing superior health solutions at every age and life stage. Position Summary: At Thorne, our production team is the heart of our operation, where science meets precision to create high-quality health and wellness products. Our hourly production roles offer hands-on experience in a clean, safe, and innovative manufacturing environment with opportunities for growth and development. Whether you're packaging finished goods, ensuring products meet our strict quality standards, or cleaning and sanitizing equipment every team member plays a critical role in delivering trusted solutions to our customers. To learn more about our packaging and Sanitation roles- watch these videos! * Packaging Operator * Sanitation Technician Schedules: 1st Shift 7:00am- 3:30pm. 2nd Shift 3:00pm-11:30pm 3rd Shift 11pm-7:30am All shifts include Saturdays plus overtime as required to meet production needs. What You Need * Minimum High school diploma or GED is required. Prior manufacturing experience preferred. * Ability to work overtime as required. * Must be able to safely work with ingredients and products that are derived from possibly allergenic sources including, but not limited to, nuts, soy, dairy, fish, and shellfish. Physical Demands * Must be able to work an entire 8 hour shift, when necessary, in an enclosed room. * Must be medically qualified to work while using a half-mask respirator or a full-air respirator for up to six hours at a time and be able to follow Thorne Research's Respiratory Protection Program guidelines. * Must be able to work in a stationary position as well as move about unassisted. * Must be able to safely and carefully operate and use assigned production equipment and machinery. * Must be able to stoop, kneel, crouch, or crawl as circumstances arise during the course of a shift as well as climb a ladder unassisted. * Must be able to operate, activate, use, prepare, and clean production equipment, occasionally grasping with force and using twisting wrist movements, as well as climb a ladder unassisted. * Must have sufficient range of motion with arms and hands to reach overhead and to the side, often repetitively, during an 8 hour shift. * Must be able to ascend/descend a ladder while carrying up to 20 pounds of material. * Must be able to print in a legible manner. * Must be able to work in a moderate noise level environment. * Must be able to move or lift items weighing up to 55 pounds from floor to table and from table to floor, often repetitively, during an 8-hour shift. What We Offer * Competitive compensation * 100% company-paid medical, dental, and vision insurance coverage for employees * Company-paid short- and long-term disability insurance * Company- paid life insurance * 401k plan with employer matching contributions up to 4% * Gym membership reimbursement * Monthly allowance of Thorne supplements * Paid time off, volunteer time off and holiday leave * Training, professional development, and career growth opportunities Thorne is the leader in science-backed health and wellness solutions committed to helping individuals live healthier longer. As the top recommended clinical brand by healthcare practitioners, Thorne offers a comprehensive range of products including nutritional supplements and health tests designed to meet the unique needs of individuals at every stage of life. Founded in 1984, Thorne products are formulated with the highest-quality ingredients, supported by clinical research, and rigorously tested to ensure purity, potency, and efficacy. Thorne is trusted by 47,000+ health-care professionals, thousands of professional athletes, more than 100 professional sports teams, multiple U.S. National Teams, and more than five million consumers. For more information, visit Thorne.com. THORNE IS AN EQUAL OPPORTUNITY EMPLOYER

The Machine operator is responsible for all functions related to daily production output. This position requires the use of computers, CAD programs, basic hand tools, and measurement instruments. **Responsibilities** + Operate and maintain fabrication machinery with precision + Read and interpret blueprints and technical drawings + Ensure quality standards are met on every project + Collaborate with a skilled team to deliver custom builds + Communicate with production leads to meet demands and follow schedules. + Inspect production parts for defects and quality standards. + Perform routine maintenance on machinery. + Maintain work area and ensure a clean, safe work environment. + Collaborate with Quality, Environmental, H&S employees to ensure compliance with safety, operational, and regulatory standards. **Additional Skills & Qualifications** + Blueprint reading is a plus. + Experience with laser, CNC, fabrication, welding, mill, and lathe operations. + Must be able to read a tape measure + Experience working within a sheet metal fabrication environment. **Job Type & Location** This is a Contract to Hire position based out of North Charleston, SC. **Pay and Benefits** The pay range for this position is $22.00 - $24.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in North Charleston,SC. **Application Deadline** This position is anticipated to close on Dec 4, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Machine Operator Duration : 12 Months Total Hours/week : 40 3rd Shift Client : Medical Devices Company Job Category : Light Industrial Level of Experience : Entry - Level Employment Type : Contract on W2 (Need US Citizens or GC Holders or GC EAD or OPT or EAD or CPT) Work hours (Days/times): 5pm-3am Monday - Thursday Job Description: Performs routine production functions including filling, utility operations, packing, packaging, assembling, labelling and inspecting under general supervision. Maintains accurate records and logs in accordance with FDA (Food and Drug Administration), GMPs (Good Manufacturing Practices) and ISO9000 (International Organization for Standardization). Effectively works in a team setting, supporting team goals and objectives. Makes effective decisions relative to position requirements. Must follow instructions and work within routine, standard practices, making decisions as required. Works under direct supervision, following standard operating procedures. Education & Skills High school diploma or equivalent. Develops skills in basic tasks, techniques and procedures within one skill area / process / method. Applies basic knowledge and skills to complete routine tasks consisting of prescribed steps. Effective communication skills at a level co-workers and Team Lead/Supervisor can understand. Ability to read, write, interpret and comprehend specifications written in English and perform basic math calculations. Must be able to work flexible and/or extended hours and report to work on a regular, punctual basis. Ability to get along with people and be able to work in a team environment. Willingness to rotate into different tasks and responsibilities.

Full-time Description The Machine Operator is responsible for operating and maintaining production equipment in a safe, efficient, and quality-focused manner. This role supports daily manufacturing operations by ensuring machinery functions properly, performing minor maintenance tasks, and following production standards to meet operational goals. Summary of Essential Job Functions Operate and monitor machinery to ensure accurate, timely, and safe production output. Perform routine cleaning, setup, and inspections following established quality and safety protocols. Assist with hose connections, equipment adjustments, and system blowdowns per operational requirements. Review production documentation and verify product specifications prior to job execution. Collaborate with team leads to address process issues, product variances, or equipment irregularities. Maintain workplace organization and comply with housekeeping standards. Complete required training and support continuous improvement initiatives. Other Duties as Assigned. Requirements Required Skills and Qualifications 6-12 months of machine operation or warehouse experience preferred. Ability to interpret production paperwork and follow verbal or written instructions. Strong attention to detail and commitment to quality. Capable of working independently with minimal supervision. Physically able to lift up to 55 lbs, stand for extended periods, and work in varying environmental conditions. Flexibility to work rotating shifts, weekends, and holidays as needed. Problem-solving mindset and willingness to adapt to operational changes. Disclaimer The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.

Job Description Tenoner Machine Operator (Window Sash Production Technician) Schedule: Full-time - Monday-Thursday 6:00 AM-3:30 PM; Friday 6:00 AM-12:00 PM Work Environment: In-person only MW Millworks is a locally owned custom millwork manufacturer specializing in high-end, architecturally accurate millwork for both new construction and impact-rated projects, with approximately 30% of our work dedicated to historic restoration. Located in North Charleston, we partner with builders, architects, and designers to produce premium-quality doors, windows, mouldings, shutters, and custom elements. Our team combines craftsmanship with precision tooling to deliver projects that enhance Charleston's architectural landscape-whether preserving history or creating something entirely new. The Opportunity We're looking for a Tenoner Machine Operator to join our production team. You'll be a key part of creating precise, high-quality window sashes using both digital and manual machinery. This is a detail-driven role that blends hands-on craftsmanship with technical precision. What You'll Do Operate tenoner machinery (digital and manual) to create window sashes. Perform sizing, assembly, sanding, and application of stops. Prepare components for priming and conduct audits and quality checks. Read and interpret CAD drawings to ensure accuracy. Collaborate with team members to maintain production schedules. Who You Are Bring pride in craftsmanship and a commitment to precision. Adaptable when plans evolve and focused on quality outcomes. Organized, detail-oriented, and comfortable working in a team-focused shop. Qualifications Experience with tenoner or similar woodworking machinery. Proficiency with measuring tools (tape measures, calipers). Ability to read CAD drawings. Strong attention to detail and mechanical aptitude. Why Work With Us In-person, hands-on culture where your work makes a visible impact. Collaborative, tight-knit team passionate about craftsmanship and quality. Competitive benefits, including employer-sponsored health insurance. Stable, full-time position with consistent 40 hours and a great schedule: Monday-Thursday: 6:00 AM-3:30 PM Friday: 6:00 AM-12:00 PM (Your weekends start early!)

Job DescriptionDescription: Now Hiring: Processing Operator Shift/Schedule: 2nd Shift/2pm - 10:30pm Pay: Base + Shift Differential = $20/hour (+ based on experience) Why join our team? Need cash before payday? We've got you covered with on demand pay Competitive hourly rate Quarterly bonuses (based on team achievement and up to 5% of wages) Full benefits package - medical, dental, vision & 401(k) match Generous PTO & holidays Growth opportunities to expand skillsets and enhance career Amazing team & culture focused on: Communication | Community Involvement | Wellness | Employee Activities Other Benefits & Programs We Offer: Full-time & stable hours - no seasonal cuts! Referral bonus program Tuition reimbursement HSA Medical plan option with annual company contribution Perks at Work - discounts on shopping, travel & more Proven continued business growth for future opportunities What You'll Do Coordinate filling and reprocessing operations Perform all necessary pipeline connections in the raw fluid silos and the mixing transfers from batching to silos Master sanitation schedule tasks will include the cleaning of walls, floors, ceilings, air vents, lights, overhead piping, and exterior surfaces Perform cleaning utilizing a COP tank Perform chemical titrations Keep a log of temperature, pressure, chemical concentration to verify that all levels are within the established control limits Perform all preventive maintenance tasks of the equipment and report to the supervisor any failure or malfunctioning Able to work independently What You'll Need No experience required - we provide thorough training Previous production, warehouse, or manufacturing experience a plus-but not required! High school diploma or equivalent Ability to work in a fast-paced environment (stand for 8+ hours and lift up to 30 lbs) Team-player mindset who shows up on time and ready to work Ability to obtain Better Processing Certification within first 6-9 months of employment About Us Gehl Foods is a fast-growing food and beverage manufacturer, known for ready-to-serve products like nacho cheese and protein shakes-no refrigeration needed! We lead with safety, quality, and teamwork in everything we do. Feed your future at gehlfoodandbeverage.com Gehl Foods is proud to be an Equal Opportunity Employer. Requirements:

PartsSource is the leading technology and software platform for managing mission-critical healthcare equipment. Trusted by over 5,000 US hospitals and 15,000 clinical sites, PartsSource empowers providers and service organizations to maximize clinical availability for patient care and automates the procurement of parts, services and training through a unique digital experience. PartsSource team members are deeply committed to our mission of Ensuring Healthcare is Always On , which is foundational to our success and growth. Our vibrant culture is built upon aligned values, shared ownership, mutual respect, and a passion for collaborating to solve complex customer problems. Description North American Imaging is looking for Production Technician. Reporting to Production Manager . You will be responsible for refurbishment x-ray tube assemblies. You will assist in the production process by performing tasks such as assembling, testing, and packaging medical supplies and equipment. Follow standard operating procedures (SOPs) and work instructions to ensure consistent quality. Understands what is critical to quality at the processes where they are trained. Has basic awareness of the electronic systems used in operations, but minimal to no interaction with the system(s) What You'll Do: Refurbishment of X-ray tube assemblies Refurbish x-ray tube housing assembly by removing x-ray insert and replacing it with a new x-ray tube insert. Replacing all bio-degradable components (O-rings, seals and bellows) Quality assurance Testing of the x-ray tube housing assembly-high voltage and performance testing. Pre label and QC on finished x-ray tube housing assembly. Final QC and labeling on finished x-ray tube housing assembly. Inspects equipment and evaluates performance using diagnostic equipment. RGA/ Evaluation. Preventative maintenance Ensures equipment is within calibration intervals. Reworks product as requested by Director of Engineering. Ensures product identification and traceability within department. What You Will Bring Documenting test results Use of muti-meter (voltmeter) Use of mechanical tools (Allen wrench, hand drills and wire cutters) and soldering ironing Basic Computer skills including a basic understanding of email, word processing, and spreadsheets) Relevant experience or qualifications. A positive attitude. Able to work efficiently under pressure. Able to work well with others. Able to meet deadlines. Attention to detail. What's In It for You Competitive salary package inclusive of base salary, incentive bonus structure and equity incentive plan; with a full benefits package (including 401k match, employer paid college debt redux, and more). An inclusive PartsSource community - work alongside other smart, passionate people Growing company investing in and committed to developing careers of our employees. A chance to revolutionize Healthcare with evidence-based decision making on the world's leading Procure-to-Pay platform! Interested? We'd love to hear from you and explore the possibilities. Please send us your resume along with an optional cover letter detailing why you're an excellent candidate. Diversity Statement We are an Equal Opportunity Employer committed to building an inclusive and diverse environment where everyone's individuality is respected, and everyone has an identity. Our commitment to inclusion across race, gender, age, religion, identity, and experience drives us forward every day. Legal authorization to work in the U.S. is required. Benefits & Perks Competitive compensation package with salary, incentives, company ownership/equity, and comprehensive benefits (401k match, health, college debt reduction, and more!) Career and professional development through training, coaching and new experiences. Hybrid culture with new & beautiful workspaces that balance flexibility, collaboration, and productivity. Inclusive and diverse community of passionate professionals learning and growing together. Interested? We'd love to hear from you! Submit your resume and an optional cover letter explaining why you'd be a great fit. About PartsSource Since 2001, PartsSource has evolved into the leading technology and software platform for managing mission-critical equipment, serving over half of the U.S. hospital infrastructure. Our digital systems modernize and automate the procurement of parts, services, technical support, and training for HTM professionals to efficiently and effectively maintain their mission-critical equipment. In 2021, Bain Capital invested in the platform, further accelerating our growth and long-term impact within the healthcare industry. Read more about us here: PartsSource Named to Newsweek's List of the Top 200 America's Most Loved Workplaces for 2024 PartsSource Named One of the Top 100 Healthcare Technology Companies of 2023 WSJ: Bain Capital Private Equity Scoops Up PartsSource PartsSource President and CEO Philip Settimi Named to Top 50 Healthcare Technology CEO List PartsSource values diversity and is committed to Equal Employment Opportunity, ensuring decisions are made regardless of race, gender, disability, or background. We welcome applicants from all walks of life and are dedicated to providing an accessible hiring process for everyone. Legal authorization to work in the U.S. is required.

Job Details Walterboro Manufacturing - Walterboro, SC Full Time Not Specified $17.00 - $25.00 Hourly None Day Skilled Labor - TradesDescription About Us Sunward Steel Buildings is a family-owned, American manufacturer, that has been in business for over 50 years. We sell, engineer, and manufacture custom metal buildings, including industrial and manufacturing facilities, barns, arenas, fitness facilities, agricultural buildings, shops, aircraft hangars, residential barndominums, self-storage facilities, and much more! We deliver these buildings to every state in the U.S. as well as Canada. We exist to fulfill our customers' dreams and goals. We are different from other steel building companies because we partner with our customers to provide a needs-based solution. At Sunward Steel we are building a growing, sustainable company. About the Role A Machine Operator is a resilient and team-minded individual responsible for installing, maintaining, and operating various types of machinery to ensure optimal performance and product quality. Key duties and responsibilities include: Setting up and calibrating manufacturing equipment. Operating machine equipment to complete production tasks efficiently. Conducting quality checks to ensure parts or materials meet required standards. Evaluating machine efficiency and identifying areas of improvement. Adhering to all safety rules, best practices, and company standards. Performing other related duties as assigned. Qualifications About You Basic Qualifications Understanding of basic math including fractions. Ability to read and interpret shop drawings. Proficiency with tape measures. Experience in setting up and operating machinery used in manufacturing. Preferred Qualifications Prior relevant experience in a similar role. Forklift certification. Overhead crane experience. Knowledge of inventory control procedures. Proficiency with hand tools. Physical Requirements Manual dexterity and stability required for precision work. Close-range vision for detailed work. Ability to lift up to 15 pounds occasionally. Capacity to traverse facilities and machinery by climbing, balancing, lifting, walking, stooping, and carrying materials. EEOC Statement Sunward Steel and its affiliates are an Equal Opportunity Employer and Prohibit Discrimination and Harassment of Any Kind: we are committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at Sunward Steel and its affiliates are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. We will not tolerate discrimination or harassment based on any of these characteristics.

Standex International is a global industrial growth company operating through our market-leading brands in electronics, cutting-edge forming technologies, engraving, and scientific refrigeration. We work with our customers to advance progress through innovation. From inventing and producing parts for next-generation space vehicles to evolving vaccine refrigeration, designing functional textures for everyday products, improving renewable energy technology, and much more, we are focused on making what's next possible. The Manufacturing Technician will assemble medical grade refrigeration equipment with the use of hand tools. This employee must be well organized, detail oriented, able to follow multi-step processes, easily take direction, able to proof and check own work for accuracy and to correct mistakes. Manufacturing Plant & Warehouse environment Working with plant employees requires a role model profile that reflects the rules and discipline levels employed on the shop floor. Some overtime may be required. What You'll Do Perform a series of basic and some moderately complex operations using a variety of hand tools, power tools, fixtures, and work instructions to properly produce and assemble medical grade refrigeration equipment. Inspect completed work for conformance to verbal and written instructions, drawings, and specifications. Maintain thorough understanding of how the work being done produces a quality part. Maintain clean, organized work area to facilitate manufacturing functions. Check for prescribed dimensions in jigs, fixtures with calipers, micrometers, and other inspection devices. Follow and accurately interpret written instructions, drawings, planning, sketches, and best practice worksheets. Perform periodic cycle counts of inventory and non-inventory parts. Perform all work in accordance with established standards and safety procedures. Other duties as assigned. What You'll Bring High School Diploma required. Must possess knowledge of machines and tools, including their designs, uses, repair and maintenance. Must have good communication and interpersonal skills to communicate rapidly and effectively within the organization and to represent the company in a professional manner to suppliers and visitors. Must be willing and able to independently pursue assignments with maximum problem-solving resolve and minimal supervision but must also readily ask for direction and help when needed. Ability to shift priorities as needed and work in a fast-paced environment. Ability to follow demonstrated steps. Must be able to lift 50 lbs., have good manual dexterity, perform physical activities that require considerable use of arms and legs and frequent movement of the whole body, and occasionally required to stoop, kneel, or crouch. 3 years' experience in manufacturing assembly/production is preferred Ability to read engineering drawings preferred Forklift certification preferred Refrigeration/ HVAC experience preferred Electrical wiring experience in a manufacturing environment preferred Some college coursework, Associate's or Bachelor's degree preferred Must pass drug screen and background check Must be willing and able to work independently and efficiently with minimal supervision, but must also readily ask for direction and help when needed Must have reliable transportation What We Value Must have good communication and interpersonal skills in order to communicate rapidly and effectively within the organization and to represent the company in a professional manner to suppliers and visitors. Must be willing and able to work independently and efficiently with minimal supervision but must also readily ask for direction and help when needed. HOURS Monday through Friday, 6:00AM - 2:30PM DISCLAIMER The above job description is not an exhaustive list of all duties and responsibilities of the position and in no way is to be construed as a contract. As with all positions, employment is "at will" or voluntary on both the part of the Company and the employee. Employment is not for a set period of time and may be discontinued by either party for any reason with or without notice. Equal Opportunity Employer. We consider candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Jrlon, Inc. - Metalworx Division Summerville, SC 29483 Entry-level position working in a manufacturing setting performing many different processes including but not limited to, operating automatic saws, Pem-Serters, deburring/polishing and operating CNC machine tools. May also include working in our powder coat/paint department: washing, masking, prep work, etc. Responsibilities and Skills needed to be successful: Must be able to closely follow instructions on job travelers. Must be able to follow company policies. Must be able to work well in a fast-paced environment with good interpersonal skills. Must be punctual. Positive Attitude. Ability to learn and read blueprints. Ability to learn new operations quickly and retain knowledge. Being a team player. Preferred Experience: No experience required Benefits: Starting Pay Range: $13 - 15 / hr. Medical Coverage Dental Vision 401K HSA (Health Savings Account) Shifts: 1st Shift 7:00 AM to 3:30 PM Job Type: Full-time

Job Description Your next opportunity starts here! . At Hartwood Consulting Group, we believe in empowering people to grow, lead, and succeed. If you're ready to take on new challenges and be part of something meaningful, we'd love to hear from you! WHO WE ARE Hartwood Consulting Group is a Service-Disabled Veteran-Owned Small Business (SDVOSB/VOSB), proudly founded in 2007. For over 15 years, we have delivered proven, measurable results to our federal customers, driving change, anticipating challenges, and preparing organizations for the future. Our highly certified experts thrive on collaboration, bringing together the right people, proven processes, and cutting-edge solutions to solve complex problems and optimize efficiency. We are trusted advisors and problem solvers - committed to integrity, excellence, and mission success in everything we do. With a people-first approach, we specialize in business consulting, innovative services, and technical solutions for the Federal market. Our team consists of diverse perspectives and driven professionals who are passionate about making a difference - for our customers, our community, and the missions we serve. OUR BENEFITS: Competitive compensation Paid Time Off 11 paid holidays Generous employer contributions to medical plans Ancillary benefit options Employer paid life, AD&D, and STD insurance Employer contribution to retirement savings plan Professional development and training We are proud to be an Equal Opportunity Employer supporting federal, state, and local government missions. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status. POSITION DESCRIPTION The Sewing Machine Operator is responsible for performing precise alterations, repairs, and finishing work on U.S. Marine Corps uniforms and related garments using industrial sewing equipment. This role supports mission readiness by ensuring that all uniforms meet Marine Corps dress standards and specifications. The operator must demonstrate a high level of craftsmanship, attention to detail, and efficiency in working with various fabrics, seams, and fastenings. Working in a fast-paced military environment, the Sewing Machine Operator contributes directly to the professional appearance and uniform compliance of service members. ESSENTIAL DUTIES AND RESPONSIBILITIES Operate industrial sewing machines (straight stitch, overlock, blind hem, bar tack, etc.) to perform alterations and repairs on military uniforms, including trousers, jackets, shirts, and dress blues. Perform hemming, tapering, seaming, patching, and zipper replacement according to USMC standards. Attach or reapply insignias, name tapes, rank patches, and other uniform components accurately and to regulation. Read and interpret work orders and alteration instructions to determine sewing tasks and specifications Inspect garments before and after sewing to ensure quality, accuracy, and proper fit. Maintain sewing equipment, replace needles, thread machines, and report malfunctions as needed. Collaborate with fitters, rippers, and customer service staff to ensure garments are properly prepped and delivered on schedule. Handle each uniform with care and discretion, maintaining accountability and confidentiality. Meet daily production goals and support the team in prioritizing urgent or ceremonial uniform requests. Follow all safety protocols, equipment procedures, and Marine Corps uniform regulations. Comply with all safety, security, and base access regulations while operating in a U.S. military environment. Report equipment issues, operational delays, or material shortages to supervisory staff in a timely manner. Provide professional, courteous, and timely customer service to U.S. Marine Corps personnel, ensuring all inquiries, concerns, and special garment requests are handled with accuracy, discretion, and a commitment to excellence. REQUIRED SKILLS AND EXPERIENCE High school diploma or GED preferred. Minimum 3 years of sewing experience, preferably in a professional or military setting. Proficiency in operating various types of sewing machines and performing hand sewing when needed. Knowledge of military garment construction and alterations strongly preferred. Ability to work with a variety of fabrics and garments with attention to precision and detail. Strong organizational skills and the ability to work independently or as part of a team. Must be able to meet security requirements and work on a U.S. military installation. Willingness to learn, cross-train and become knowledgeable in other functional areas. WORKING ENVIORNMENT Indoor workshop environment with industrial sewing equipment. Frequent sitting, repetitive motion, and use of hands/fingers. Exposure to fabric dust, sewing machine noise, and occasional lifting of garment bundles up to 25 lbs. High-paced work environment with deadlines tied to military schedules and events. Structured and regulated setting with strict quality and delivery standards in support of U.S. Marine Corps operational needs.

This position works under close supervision and is primarily responsible for performing all duties and tasks associated with one of the work cells listed below, as assigned by plant management, while adhering to quality standards according to GMP, sanitation and safety procedures. Knowledge of the SAP functions listed below must also be mastered. PRINCIPAL DUTIES AND RESPONSIBILITIES 1. * Sets- up (assembles and disassembles), operates, adjusts and cleans equipment to produce color products and packages these finished goods according to quality, GMP, safety and sanitation standards. Operations may include blending, filling and packing procedures. 2. * Locates, prepares, transfers and loads materials to be processed; transfers WIP or finished product to filling operation, additional processing operations, storage or shipping area. 3. * Prepares packing materials (drums, pails, boxes) and packaging labels and stacks or stages containers for transfer. 4. Draws samples and takes to QC lab for testing per product specifications. Confers with lab technicians and supervisors and makes adjustments to the process to bring the product within specification. 5. Prints and applies labels to product. 6. Completes necessary paperwork or data entry for production/lab records and inventory levels. 7. Follows all GMP, safety, sanitation and quality specifications and procedures. KNOWLEDGE, SKILLS & ABILITIES 1. Ability to read, write and speak English. 2. Ability to apply basic mathematical concepts to the production process including conversion of weight and volume in the metric system. 3. Ability to read and follow a recipe for mixing and/or blending product. 4. Ability to operate a forklift. 5. Ability to use basic hand tools (hammer, screwdriver, wrench) for assembly and disassembly of equipment. 6. Ability to communicate effectively with co-workers regarding the status of the production process. 7. These characteristics are normally acquired through a High School Diploma or GED with experience in a production environment preferred. WORKING CONDITIONS Working environment is a production unit and includes frequent exposures to wet, humid, dusty, or loud conditions, moving machine parts, fumes or airborne particles and caustic chemicals. A company issued uniform is required to be worn along with personal protective equipment at all times. This can include coveralls, dust mask, hearing protection, hair/beard net, safety glasses, gloves, and safety shoes. Work may occur in small rooms with air lock compliance to avoid interdepartmental contamination. PHYSICAL DEMANDS While performing the duties of this job, the employee is frequently required to stand, walk, talk, hear, lift and/or move materials or equipment up to 50 lbs, use hands to finger, handle objects, tools or controls and roll bags, scoop, kneel, crouch or crawl and use foot/feet to operate machinery. Specific vision abilities required by this job include vision, color vision, depth perception and the ability to adjust focus. What We Offer: Comprehensive Health Coverage - Medical, Dental, and Vision Plans to support you and your family on your first day of employment 401(k) Retirement Plan with Employer Match - Plan for your future with company-supported retirement savings Paid Time Off - Enjoy a healthy work-life balance with PTO and 11 Paid Holidays Paid Parental Leave -Maternity and Paternity Leave so you can focus on what matters most Employee Engagement - Join our Engagement Team for fun events, volunteer opportunities, and ways to connect with colleagues across the company

Salary: 1st Shift $21.00 2nd & 3rd Shift: $21.00 + $2.25 Shift Differential At Thorne, we work to deliver high-quality, science-backed solutions to empower individuals to take a proactive approach to their well-being. Each day begins with a mission to help others discover and achieve their best health. We count on our team members to challenge and push the boundaries to make that happen. At Thorne, you'll be joining a team of more than 750 passionate individuals committed to our cause of providing superior health solutions at every age and life stage. Position Summary: At Thorne, our production team is the heart of our operation, where science meets precision to create high-quality health and wellness products. Our hourly production roles offer hands-on experience in a clean, safe, and innovative manufacturing environment with opportunities for growth and development. Whether you're Mixing raw ingredients, operating machinery, or calibrating a machine ensuring products meet our strict quality standards, every team member plays a critical role in delivering trusted solutions to our customers. To learn more about our packaging and Sanitation roles- watch these videos! * Encapsulation Operator * Mixing Operator Schedules: 1st Shift 7:00am- 3:30pm. 2nd Shift 3:00pm-11:30pm 3rd Shift 11pm-7:30am All shifts include Saturdays plus overtime as required to meet production needs. What You Need * Minimum High school diploma or GED is required. Prior manufacturing experience preferred. * Ability to work overtime as required. * Must be able to safely work with ingredients and products that are derived from possibly allergenic sources including, but not limited to, nuts, soy, dairy, fish, and shellfish. Physical Demands * Must be able to work an entire 8 hour shift, when necessary, in an enclosed room. * Must be medically qualified to work while using a half-mask respirator or a full-air respirator for up to six hours at a time and be able to follow Thorne Research's Respiratory Protection Program guidelines. * Must be able to work in a stationary position as well as move about unassisted. * Must be able to safely and carefully operate and use assigned production equipment and machinery. * Must be able to stoop, kneel, crouch, or crawl as circumstances arise during the course of a shift as well as climb a ladder unassisted. * Must be able to operate, activate, use, prepare, and clean production equipment, occasionally grasping with force and using twisting wrist movements, as well as climb a ladder unassisted. * Must have sufficient range of motion with arms and hands to reach overhead and to the side, often repetitively, during an 8-, 10-, or 12-hour shift. * Must be able to ascend/descend a ladder while carrying up to 20 pounds of material. * Must be able to print in a legible manner. * Must be able to work in a moderate noise level environment. * Must be able to move or lift items weighing up to 55 pounds from floor to table and from table to floor, often repetitively, during an 8-hour shift. What We Offer * Competitive compensation * 100% company-paid medical, dental, and vision insurance coverage for employees * Company-paid short- and long-term disability insurance * Company- paid life insurance * 401k plan with employer matching contributions up to 4% * Gym membership reimbursement * Monthly allowance of Thorne supplements * Paid time off, volunteer time off and holiday leave * Training, professional development, and career growth opportunities Thorne is the leader in science-backed health and wellness solutions committed to helping individuals live healthier longer. As the top recommended clinical brand by healthcare practitioners, Thorne offers a comprehensive range of products including nutritional supplements and health tests designed to meet the unique needs of individuals at every stage of life. Founded in 1984, Thorne products are formulated with the highest-quality ingredients, supported by clinical research, and rigorously tested to ensure purity, potency, and efficacy. Thorne is trusted by 47,000+ health-care professionals, thousands of professional athletes, more than 100 professional sports teams, multiple U.S. National Teams, and more than five million consumers. For more information, visit Thorne.com. THORNE IS AN EQUAL OPPORTUNITY EMPLOYER