Production operator jobs in Colorado Springs, CO - 67 jobs

at Samtec, Inc Samtec is looking for a Manufacturing Production Operator to work on our Fiber Attach product line. The position is in our Colorado Springs, CO location. First shift hours M-F 6:00 AM-2:30 PM. Pay is $18.25 - $ 18.75 per hour plus applicable bonus and is commensurate with experience. Standard benefits are medical (HSA/PPO) dental, vision, hearing, group life, AD&D, short and long term disability, EAP, 401K plus other voluntary options, as well as paid time off.As a Fiber Attach (FA) operator, the main objective will be to prepare optical cable for the attach process, attach the cable to an optical connector and perform required testing and inspections on assemblies. Essential Functions/Responsibilities: Be able to heat strip, cleave and inspect fiber Attach optical cable to connectors Perform measurements, alignment and testing of optical cable Have a good understanding of the work instructions that apply to the area Read, comprehend and be able to build orders according to information/specifications found on blueprints and PICS Must be familiar with all equipment and tooling and understand how and why it is used in the assembly process Must be able to use a microscope for extended periods of time Maintain in process workflow in a lean manufacturing environment Must a have a quality mindset throughout all processes Communicate effectively with co-workers (both written and verbal) Must have patience with new, tedious processes and have the creative mindset to suggest ideas for improved processes and tooling Must be willing to pay attention to detail “The responsibilities as defined are intended to serve as a general guideline for this position. Associates may be asked to perform additional tasks depending on strengths and capabilities.” Required Experience: One Year Production/Manufacturing experience. Must be willing to adhere to department safety rules and regulations. May be exposed to noise (required to wear protective gear). May be exposed to Hazardous Materials & Chemicals (required to wear safety glasses and other protective gear). Physical Requirements: Steady hands Good hand/eye coordination Ability to work in a clean work environment. Must be able to sit/stand for at least 90 consecutive minutes, and not suffer from any sensory deprivation and/or paralysis of the limbs. Preferred Education: High school diploma or equivalent required. Training Required: On the job training as appropriate. SAMTEC, Inc. is an Equal Opportunity Employer and committed to creating a diverse environment. All employment decisions at Samtec are based in business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, pregnancy or parental status, age, disability, sexual orientation, gender and/or gender identity/expression, marital status, past or present military service, family medical history or genetic information, or any other status protected by applicable laws. Privacy Policy: *****************************************************

Descripción Puesto en Samtec, Inc Samtec is looking for a Manufacturing Production Operator to work on our Fiber Attach product line. The position is in our Colorado Springs, CO location. First shift hours M-F 6:00 AM-2:30 PM. Pay is $18.25 - $ 18.75 per hour plus applicable bonus and is commensurate with experience. Standard benefits are medical (HSA/PPO) dental, vision, hearing, group life, AD&D, short and long term disability, EAP, 401K plus other voluntary options, as well as paid time off.As a Fiber Attach (FA) operator, the main objective will be to prepare optical cable for the attach process, attach the cable to an optical connector and perform required testing and inspections on assemblies. Essential Functions/Responsibilities: Be able to heat strip, cleave and inspect fiber Attach optical cable to connectors Perform measurements, alignment and testing of optical cable Have a good understanding of the work instructions that apply to the area Read, comprehend and be able to build orders according to information/specifications found on blueprints and PICS Must be familiar with all equipment and tooling and understand how and why it is used in the assembly process Must be able to use a microscope for extended periods of time Maintain in process workflow in a lean manufacturing environment Must a have a quality mindset throughout all processes Communicate effectively with co-workers (both written and verbal) Must have patience with new, tedious processes and have the creative mindset to suggest ideas for improved processes and tooling Must be willing to pay attention to detail “The responsibilities as defined are intended to serve as a general guideline for this position. Associates may be asked to perform additional tasks depending on strengths and capabilities.” Required Experience: One Year Production/Manufacturing experience. Must be willing to adhere to department safety rules and regulations. May be exposed to noise (required to wear protective gear). May be exposed to Hazardous Materials & Chemicals (required to wear safety glasses and other protective gear). Physical Requirements: Steady hands Good hand/eye coordination Ability to work in a clean work environment. Must be able to sit/stand for at least 90 consecutive minutes, and not suffer from any sensory deprivation and/or paralysis of the limbs. Preferred Education: High school diploma or equivalent required. Training Required: On the job training as appropriate.

A client of Ryzen Solutions is seeking a talented and experienced CNC Fabrication Technician to join their precision sheet metal team. This role is crucial for manufacturing parts for innovative electronic signage solutions. The ideal candidate will have a passion for precision and be skilled in operating a range of CNC machinery to produce high-quality components. Key Responsibilities Fabrication and Operation: Interpret detailed blueprints and engineering drawings to operate a variety of CNC machinery, including press brakes, punch presses, laser cutters, shears, and hardware insertion equipment. Quality Assurance: Ensure all fabricated components meet strict dimensional and cosmetic standards. This involves using precision measurement tools like calipers and micrometers for in-process inspections. Collaboration: Work closely with engineering and quality teams to troubleshoot issues and optimize processes. Maintenance: Maintain a clean and safe workspace and perform basic machine maintenance. Requirements Experience: 2-5 years of experience in precision sheet metal fabrication. Technical Skills: Proficient at reading mechanical drawings and work orders. In-depth knowledge of various metals (aluminum, mild steel) and fabrication methods. Solid experience with hand tools, power tools, and CNC equipment. Basic computer skills for tracking production and machine interaction. Experience with machine file software and tooling setup is a plus. Physical Demands: Must be able to lift 50 lbs and stand for long periods. Compensation: The pay for this role is between $18 and $28 per hour. Benefits Health and Wellness: Comprehensive medical, dental, and vision coverage. Financial: 401(k) with a company match, company-paid life and disability insurance. Time Off: Paid holidays, vacation time, and personal time off.

Are you looking for a unique opportunity to be a part of something great? Want to join a 17,000-member team that works on the technology that powers the world around us? Looking for an atmosphere of trust, empowerment, respect, diversity, and communication? How about an opportunity to own a piece of a multi-billion dollar (with a B!) global organization? We offer all that and more at Microchip Technology Inc. People come to work at Microchip because we help design the technology that runs the world. They stay because our culture supports their growth and stability. They are challenged and driven by an incredible array of products and solutions with unlimited career potential. Microchip's nationally-recognized Leadership Passage Programs support career growth where we proudly enroll over a thousand people annually. We take pride in our commitment to employee development, values-based decision making, and strong sense of community, driven by our Vision, Mission, and 11 Guiding Values; we affectionately refer to it as the Aggregate System and it's won us countless awards for diversity and workplace excellence. Our company is built by dedicated team players who love to challenge the status quo; we did not achieve record revenue and over 30 years of quarterly profitability without a great team dedicated to empowering innovation. People like you. Visit our careers page to see what exciting opportunities and company perks await! Job Description: Microchip is currently looking for positive and productive people who love to work in a team with people who care about each other and are passionate about the work that they do. We are hiring full-time Production Specialists at our facility in Colorado Springs, Colorado. We are committed to providing opportunities for growth, learning, and advancement for our Production Specialists. We regularly promote from within the company, so this position is a great opportunity to begin your career with Microchip. No prior experience is necessary. We are invested in our employees, and our in-house training programs will provide you all the tools, resources, and support you need to be successful. In addition to full-time employment and a consistent work schedule, Microchip offers a full and competitive package of benefits. This role will require completing and passing a basic online math and comprehension test as part of the interview process. If you would like to be a part of a dynamic and high-performing team, please complete your application for this job posting. Shift will be either: Front Days (A shift) every Sunday, Monday, Tuesday, every other Wednesday 7:00am-7:12pm Or Back Days (C shift) every Thursday, Friday, Saturday, every other Wednesday 7:00am-7:12pm Job Responsibilities: Learn the essential protocol for the cleanroom including the smock requirements. You will learn to operate the machines (or “tools”) that manufacture silicon wafers to make a large variety of different computer chips. The machines operate with elements such as power, water, gas, heat, metals, and various chemicals. You will learn to check and qualify tools and run engineering experiments to ensure that equipment and processes are running within specified limits. You will need to communicate with the appropriate people when equipment and processes do not meet specified limits or are not working properly. In time, you will learn multiple areas to diversify your skill set and to be able to help your team wherever the work is most needed. You will learn and perform all things needed to develop the knowledge and expertise to help your team meet production goals. After becoming proficient on a toolset, you will eventually share your knowledge, teach, and train others as needed so they can learn to successfully operate these toolsets as well. Requirements/Qualifications: Required: High school diploma or GED. Basic computer, math and reading comprehension skills. Proficiency in written and oral communication. The ability to follow detailed work specifications and instructions for each piece of equipment, while also meeting deadlines. Maintain and exhibit positive and productive attitudes and behavior with others. Willingness to participate in building a positive culture and contribute to a pleasant work environment. The ability to work on multiple different tasks throughout the day by focusing on one task at a time and paying careful attention to detail until completed, then quickly moving on to the next task. Working across designated areas of the cleanroom with the related machinery. Prior success working individually and in a team environment. Dependable attendance and punctuality. Availability to work a defined schedule assigned to you. Adaptability to change and a willingness to do whatever is needed for the team to be successful. Is a continuous learner and desires to enhance his/her skills and knowledge. Produces quality work, takes the job seriously, and displays good work habits. Takes the initiative to stay busy, work hard, and be productive. Perform work that can be repetitive in motion. Ability to wear and work in a cleanroom suit and PPE for the full shift. The cleanroom smock consists of a hood, face veil over the nose and mouth, safety glasses, light weight suit, fitted nitrile gloves, and shoe coverings. When working with chemicals, additional PPE may be required. Preferred: Prior production experience in a cleanroom environment is not required but is desirable. Travel Time: 0% - 25% Physical Attributes: Bending at Waist, Carrying, Climbing, Crouching, Feeling, Foot Controls, Fumes or Odors, Handling, Hearing, Kneeling, Lifting, Noise and/or vibration, Other, Pulling, Pushing, Reaching, Seeing, Stooping, Talking, Works Alone, Works Around Others Physical Requirements: Ability to stand 95%, walk 90%, sit 5%. Must also be able to carry and lift 6lbs, and push and pull up to 85 lbs on wheels. Pay Range: We offer a total compensation package that ranks among the best in the industry. It consists of competitive base pay, restricted stock units, and quarterly bonus payments. In addition to these components, our package includes health benefits that begin day one, retirement savings plans, and an industry leading ESPP program with a 2 year look back feature. Find more information about all our benefits at the link below: Benefits of working at Microchip The hourly pay range for this position, which could be performed in the US, is $17-22/hr.* *Range is dependent on numerous factors including job location, skills and experience. Application window will remain open until qualified candidates have been identified. Microchip Technology Inc is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. For more information on applicable equal employment regulations, please refer to the Know Your Rights: Workplace Discrimination is Illegal Poster. To all recruitment agencies: Microchip Technology Inc. does not accept unsolicited agency resumes. Please do not forward resumes to our recruiting team or other Microchip employees. Microchip is not responsible for any fees related to unsolicited resumes.

As a Facility Ops Team Member, you will ensure the cleanliness of the facility while offering great customer service. The club space must be clean, stocked with supplies and meet Life Time's standards of presentation. Job Duties and Responsibilities * Maintains indoor and outdoor club cleanliness and safety by performing daily maintenance tasks * Washes, folds, and stocks member towels and ensures the locker rooms are neat, and orderly * Ensures the usage of locker room consumables, cleaning products, and chemicals follow the amount prearranged by the department budget * Responds to member inquiries regarding Life Time products, services, policies and procedures Position Requirements * Ability to routinely bend to raise more than 20 lbs. * Ability to work in a stationery position and move about the club for prolonged periods of time Preferred Requirements * High School Diploma or GED Pay This is an hourly position with wages starting at $15.00 and pays up to $18.00, based on experience and qualifications. Benefits All team members receive the following benefits while working for Life Time: * A fully subsidized membership * Discounts on Life Time products and services * 401(k) retirement savings plan with company discretionary match (21 years of age and older) * Training and professional development * Paid sick leave where required by law Full-time Team Members are eligible for additional benefits, including: * Medical, dental, vision, and prescription drug coverage * Short term and long term disability insurance * Life insurance * Pre-tax flexible spending and dependent care plans * Parental leave and adoption assistance * Paid time off, including 5 to 20 vacation days per calendar year (based on tenure) and paid sick leave * Deferred compensation plan, if the team member meets the required income threshold Life Time is a place for everyone. As an organization, we are committed to an inclusive, diverse and equitable workplace that respects and celebrates the unique contributions of each individual while ensuring we remain an equal opportunity employer that recruits, hires, trains and promotes based on merit and qualifications.

We are seeking engaged, driven individuals with an active CDL license to join our team of Mixer Operators at SRM Concrete. The primary responsibility of the Mixer Operator is to ensure the efficient and safe production of high-quality concrete products. This involves safely operating and maintaining concrete mixer trucks, loading and mixing concrete according to precise specifications, and with exceptional customer service, delivering the product to various construction sites, commercial and residential. The role demands a strong commitment to safety, a keen eye for detail, and the ability to work effectively in a team. We value Go-Getters and are committed to ensuring every team member shares in the success of SRM Concrete. Key Responsibilities: Safely operate a concrete mixer truck to transport and deliver concrete products. Load and mix concrete ingredients by following specific job orders and company protocols. Ensure timely delivery of concrete products to construction sites, maintaining courteous and professional interaction with the customers and the public. Conduct pre-and post-operation checks on the mixer truck to ensure its proper functioning and report any maintenance or repair needs. Adhere to all safety protocols and procedures to prevent accidents and ensure the safety of all team members and the public. Maintain accurate records of deliveries, vehicle maintenance, and other relevant documentation as required. Work closely with the dispatch team to ensure efficient scheduling and routing of deliveries. Assist in other duties as assigned, which may include general maintenance tasks or supporting other team members in the production process. Qualifications: Valid CDL Class A or B license. Current DOT Medical Card. Proven safe driving record. Physically able to lift/carry up to 100 lbs, climb ladders/stairs, and work in varying weather conditions. No unexplained gaps in employment history. Strong teamwork, reliability, and adaptability. Previous experience as a Mixer Operator or in a similar role is preferred, but not mandatory. Willingness to undergo SRM's pre-employment screenings. About us: SRM strives to be the largest, most profitable construction material company in the country, while maintaining a best-in-class culture. SRM's 5 Principles of Service: Safety, Quality, Kindness, Cleanliness, Go-Getter Why Join Us? As part of our team, you'll me more than a CDL holder; you'll be a valued concrete expert. Our commitment to our team includes: Growth: Opportunities for advancement in a rapidly growing company. Home Daily: Enjoy work-life balance with daily home time. Competitive Compensation: Hourly pay with eligibility for bonuses and annual raises. Exceptional Benefits: Comprehensive benefits package including low-cost medical, dental, vision, STD, LTD, and life insurance, paid holidays, PTO and vacation programs, 401k with $100 match/week, family days, and more! Overtime Opportunities: Daily overtime after 8 hours and weekly after 40 hours Candidates will be required to undergo a pre-employment drug screen, SRM's pre-employment physical, and consent to background checks, including Clearinghouse and MVR checks. We are an equal-opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Pay Range: $20-22 The deadline to apply is 09/19/2025 Machine Operator I and II MACHINE OPERATOR I: This entry-level position is in a machine shop environment and requires a team-oriented individual to assist in setting up and operating CNC machinery. You will also support various processes to produce parts for the aerospace industry. Essential Responsibilities: * Maintain proper condition of measuring instruments * Maintain proper cutting conditions on machining centers * Meet or exceed required output hours * Ability to learn how to set equipment/machinery for production. * Monitors operation of machinery or equipment * Determines whether materials or products meet standards * Performs other duties as required and available for overtime as necessary. Skills Required: * Ability to learn how to read and interpret engineering drawings * Ability to read and understand basic work instructions for product fabrication * General knowledge, skills, and understanding with hand and power tools to include, rotary tooling, sanding devices, manual deburring tools, wrenches, etc. * Strong interpersonal skills. * Ability to learn and utilize inspection tools to include calipers, tape measures, pin gauges etc. * Basic mechanical knowledge. * Strong interpersonal skills. * Basic Shop Math Skills * Basic PC skills for data entry, timecard and production time entries * Prior experience in machine shop environments preferred. MACHINE OPERATOR II: This mid-level position is in a machine shop environment and requires a team-oriented individual to assist in setting up and operating CNC machinery. You will also support various processes to produce parts for the aerospace industry. Essential Responsibilities: * Maintain proper condition of measuring instruments * Maintain proper cutting conditions on machining centers * Meet or exceed required output hours * Sets equipment/machinery to required settings * Monitors operation of machinery or equipment * Determines whether materials or products meet standards * Performs other duties as required and available for overtime as necessary. Skills Required: * Read and interpret engineering drawings * Ability to read and understand basic work instructions for production processes. * Skills and understanding with hand and power tools to include, rotary tooling, sanding devices, manual deburring tools and pneumatic handheld tools. * Strong interpersonal skills. * Basic mechanical knowledge. * Proficiency with precision measuring and fixed gauge equipment (micrometers, calipers, electronic height gauges, etc.) * Strong interpersonal skills. * Intermediate knowledge of shop math skills. * Basic PC skills for data entry, timecard and production time entries. * Prior experience in machine shop environments preferred. US Citizen candidates only Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices. Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at accommodations@butler.com.

Are you eager to help shape the future of mobility and contribute to sustainability? Then Vossloh is the right place for you. Join our team and be part of innovative solutions that drive positive change in the transportation industry. Manufacturing Production Workers focus on setting up, operating, maintaining, and troubleshooting manufacturing production (i.e., machining, processing, assembly, or packaging) equipment including: •Operating machine tool, chemical processing, assembly, or packaging equipment to manufacture products according to production specifications, schedules, volume/cost/wastage targets, and quality standards •Moving, packing, and sorting raw materials or finished goods •Monitoring the quality of output to identify, discard, or re-manufacture faulty products •Maintaining accurate daily production records as input to manufacturing performance analysis Your contact person Pavicich, Mary

**Hiring Machine Operators** As a Machine Operator, you will set up and operate a variety of automatic or semi-automatic manufacturing machines, including robotic assembly equipment used in the production of semiconductor products. Come work for a company with huge growth potential, and opportunities for career advancement! **Shift & Pay:** **_($1 pay increase after 4 months)_** 7:00AM - 7:00PM Monday - Thursday _(compressed workweek schedule):_ $19-20/hr 7:00PM - 7:00AM Monday - Thursday _(compressed workweek schedule):_ $21.50-23/hr **Responsibilities:** + Minimum of 1 year of machine operating or assembly experience. + Operate traditional fabrication equipment. + Feed materials for processing and pull finished products from the line. + Utilize tools required for wafer and panel processing. + Perform first-level maintenance and troubleshooting. + Set up and operate assigned production equipment. **Must Have:** + Minimum of 1 year of recent machine operating OR assembly experience + Cleanroom experience is preferred. + Ability to stand on your feet for 12 hour shifts **Job Type & Location** This is a Contract to Hire position based out of Colorado Springs, CO. **Pay and Benefits** The pay range for this position is $19.00 - $23.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Colorado Springs,CO. **Application Deadline** This position is anticipated to close on Jan 27, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

←Back to all jobs at SOMOS CST INC MACHINE OPERATOR SOMOS-CST Colorado Springs, CO Full-time - $18-$20/hr Do you have steady hands and a sharp eye for detail? Join our precision optics team! SOMOS CST is a family-owned small business in Colorado Springs specializing in fine grinding and polishing extremely delicate glass components for the medical, defense, optics, and green tech industries. We're seeking steady-handed, detail-oriented team players who take pride in precision work and can carefully handle fragile materials throughout all stages of production. About SOMOS CST As an original equipment manufacturer (OEM), we provide comprehensive grinding and polishing solutions for clients in high-performance sectors, including precision optics, electronic sensors, watchmaking, and renewable energy - including EV, solar, and fuel cells. Our Team & Culture Our close-knit team thrives on innovation, collaboration, and excellence. We offer a casual, high-energy, goal-focused culture where team members can make a big impact in a small, entrepreneurial setting. Team members also enjoy great perks - health coverage, 401(k) match, and generous paid time off - all while enjoying life in one of the nation's most scenic locations. Position Summary The Machine Operator plays a key role in manual processing of ultra-thin, delicate glass materials. This position emphasizes careful, precise, and methodical handling to prevent damage and maintain exacting quality standards. Previous machine operating experience is helpful but not required; fine motor skills, patience, and dexterity are most essential in this role. Key Responsibilities Handle extremely fragile glass pieces with precision and care to minimize breakage Produce parts according to manufacturing specifications and quality standards Prepare materials for cutting, grinding, and polishing Mount, dismount, and debond materials for machine operations Operate diamond wire saws, lapping, and polishing equipment (training provided) Measure, inspect, and document parts and processes Maintain a clean, organized, and safe workspace Perform basic maintenance and quality checks on equipment Other duties as assigned Minimum Requirements High school diploma or equivalent 40 hrs/week, Mon-Fri, 2nd shift (potential 3rd shift), occasional weekends Excellent hand-eye coordination and manual dexterity required Ability to focus on repetitive, detail-oriented tasks Self-motivated, team-focused, and reliable Willingness to learn and adapt to specialized processes Successful completion of a probationary training period Transferable Skills Backgrounds in assembly, optics, jewelry, electronics, laboratory, production, food service, or other repetitive, hands-on, precision-based work Proficiency with hand tools, gauges, and mechanical aptitude is a plus Familiarity with lean manufacturing or structured processes for quality and efficiency Ability to follow precise written and verbal instructions Physical Demands Handle thin, delicate glass components with steady hands to minimize breakage Stand for extended periods while performing repetitive, hands-on tasks Perform tasks requiring fine motor control and sustained manual dexterity Lift or move materials and supplies as needed (up to 10-20 lbs) Inspect parts and measure components requiring good visual acuity The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodation may be made to enable individuals with disabilities to perform the functions. Benefits Summary Competitive pay: $18-$20/hour Health coverage: Medical, Dental, Vision Company-paid Life, AD&D, STD, & LTD coverage 401(k) match 15 days PTO annually Opportunities for growth in a supportive, innovative environment SOMOS CST is an Equal Opportunity Employer, promoting a drug- and alcohol-free workplace with mandatory pre-employment and random drug testing. Please visit our careers page to see more job opportunities.

Job DescriptionDescription: ***WE SPEAK SPANISH!! HABLAMOS ESPANOL!!*** This position participates on a cross functional team supporting operations, maintenance, customer load out and quality control to ensure the safe operation of the manufacturing process. KEY RESPONSIBILITIES Demonstrates a commitment to communicating, improving and adhering to safety policies in all work environments and areas. Operates computerized process control stations which control heavy manufacturing equipment in a minerals processing plant. Monitors and maintains quality control systems and procedures. Monitors and observes assigned area for abnormal conditions and emergency situations. Works and interacts with outside contractors, customers and agencies. Participates in safety reviews and other training activities. Maintains proper and safe process operations of the operating equipment. Performs maintenance related activities including welding, fabrication, housekeeping and other labor-intensive activities. Completes inspections and reports and deviations from standards. Loads out customer orders including bulk and bagging operations. Operates mobile equipment including skid loaders, wheel loaders, fork lifts, lifts and other heavy manufacturing mobile equipment. Upholds company values, understands and implements all company policies and procedures to ensure all work meets required standards. Position requires shift work including 12 hour shifts that may rotate supporting a 24/7 manufacturing operation. Requirements: Demonstrates a commitment to communicating, improving and adhering to safety policies in all work environments and areas. Operates computerized process control stations which control heavy manufacturing equipment in a minerals processing plant. Monitors and maintains quality control systems and procedures. Monitors and observes assigned area for abnormal conditions and emergency situations. Works and interacts with outside contractors, customers and agencies. Participates in safety reviews and other training activities. Maintains proper and safe process operations of the operating equipment. Performs maintenance related activities including welding, fabrication, housekeeping and other labor-intensive activities. Completes inspections and reports and deviations from standards. Loads out customer orders including bulk and bagging operations. Operates mobile equipment including skid loaders, wheel loaders, fork lifts, lifts and other heavy manufacturing mobile equipment. Upholds company values, understands and implements all company policies and procedures to ensure all work meets required standards. Position requires shift work including 12 hour shifts that may rotate supporting a 24/7 manufacturing operation. RELATIONSHIPS WITH OTHER JOBS Reports to the Plant Superintendent KNOWLEDGE, SKILLS & ABILITIES Required Education: High School Diploma or GED. Field of Study Preferred: Industry related field experience preferred. Preferred Work Experience: 1-2 years in manufacturing operation including process control and maintenance experience. Preferred Computer and Software Skills : Knowledge of processing methods and laboratory techniques and equipment operation. Proficiency with MS Office. Additional Requirements: Knowledge of processing methods and appropriate planning techniques. Problem solving and analytical skills. Ability to read, analyze, and interpret technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals.

Pay Type: Hourly Pay Rate $31.92/Hourly Travel Requirement: As the partner of choice for professional builders, we offer advanced branded solutions from foundation to rooftop. Wherever our customers are, whatever their job, we're ready to deliver. Our 19,000 colleagues work across 1,000 sites supported by an unparalleled distribution network. Infrastructure, commercial and residential, new build, repair and refurbishment: We're in every construction market. Amrize listed on the New York Stock Exchange and the SIX Swiss Exchange on June 23, 2025, following our spinoff as an independent company. Join us and build _your_ ambition. Learn more at ********************** (****************************************** Description: We're seeking aProduction Technicianwho's ready to put your skills to work on projects that matter - and build a career with a company that's building North America. **Job Title:** Production Technician **| Req ID:** 15263 | **HR Contact:** Carla J. NAVARA | **Location:** Portland Cement Plant CO **ABOUT THE ROLE** Under the direction of the Production Coordinator, the Production Technician is responsible for maintaining and monitoring the efficient operation of all production processes. **WHAT YOU'LL ACCOMPLISH** + Exercise and encourage core values including but not limited to; developing self and coaching others by inspiration and empowerment + Responsible to maintain and monitor efficient operation of all production processes. + Make routine operation and preventative maintenance inspections of process equipment, report all unusual conditions, and prepare work orders for maintenance when required. + Operate dump trucks, skid loader, front end loader, forklift and other equipment. + Able to clean the preheater tower with jack hammers and air lances. + As directed, reclaim sand, iron ore, gypsum and clinker into the process. + Operate limestone reclaimers to face storage piles and position reclaimers prior to the start of reclaim operation. + As directed, lubricate, inspect, adjust or make repairs to process equipment. + Completion of the Area Safety Inspection, Mobile Equipment Checklist and any other documentation as required. + General housekeeping - keep work areas clean. + Must be able to work rotating shifts. + Demonstrate a commitment to communicating, improving and adhering to health, safety and environmental policies in all work environments and areas. Promote a culture of safety and exhibit these behaviors. + Other duties as assigned. **WHAT WE'RE LOOKING FOR** **Education:** High School diploma/GED **Required Work Experience:** 1-3 years **Licenses Preferred:** Valid Driver's License Required **Required Computer and Software Skills:** Basic knowledge about computers, Microsoft Office and SAP. **Additional Requirements:** + Must be able to climb stairs and ladders and work in both hot and cold environments. + Must be able to work in awkward positions for short periods of time. + Must be able to work in confined areas and elevated platforms (working at heights). + Knowledge of the cement manufacturing process and equipment a plus. + Able to obtain ATF clearance for handling of explosives + Read, write and speak English. + Basic computer skills. + Strong work standards and attendance record. + Class B or higher CDL is a plus. + Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests. Accepting applications until 1/15/2026 **BUILDING INCLUSIVE WORKSPACES** At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email recruiting-accommodations@amrize.com . This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted. **Nearest Major Market:** Colorado Springs

We are seeking a Production Laborer to join our team! To Apply: Click on the “apply” button to get started or apply in-person (2662 North Freeway, Pueblo, CO 81003)! What We Offer: Work in a team-oriented environment where collaboration is a priority. Achieve your professional goals without sacrificing the balance between work and life. A comprehensive benefits package with options to choose what works best for you and your family. About the Role: As a Production Laborer you are responsible for: Pouring Concrete Welding Rebar Forklift Operation Using Hand Tools Using Cranes Adhering to Safety Procedures. About You: We Require: 1 Year of experience working in a manufacturing environment. Comfort with Lifting up to 100 Pounds The ability to work in a dusty, industrial, climate-controlled environment. A great understanding of Safety Compliance. Comfort working around Industrial Machinery. *Your offer may be contingent upon passing a drug-screen and pre-employment testing for this role!* We are seeking a Production Laborer to join our team! To Apply: Click on the “apply” button to get started or apply in-person (2662 North Freeway, Pueblo, CO 81003)! What We Offer: Work in a team-oriented environment where collaboration is a priority. Achieve your professional goals without sacrificing the balance between work and life. A comprehensive benefits package with options to choose what works best for you and your family. About the Role: As a Production Laborer you are responsible for: Pouring Concrete Welding Rebar Forklift Operation Using Hand Tools Using Cranes Adhering to Safety Procedures. About You: We Require: 1 Year of experience working in a manufacturing environment. Comfort with Lifting up to 100 Pounds The ability to work in a dusty, industrial, climate-controlled environment. A great understanding of Safety Compliance. Comfort working around Industrial Machinery. *Your offer may be contingent upon passing a drug-screen and pre-employment testing for this role!*

Front Range Staffing is seeking an experienced Chemicals Manufacturing Technician with 3+ years of chemical handling and process operations experience for a manufacturing company in Pueblo, CO. Pay: $24.00-$26.00/hour Schedule: Monday-Friday, 6:00 a.m. - 2:00 p.m. (initial training period), then transition to 6:00 p.m. - 6:00 a.m., three days on, two days off, three days on. Position Description:This Manufacturing Technician position involves hands-on work in a high-volume chemical manufacturing and processing environment. The successful candidate will be responsible for the safe and efficient handling, loading, sampling, and unloading of bulk chemical materials, including sulfuric acid, ammonium fluoride, hydroperoxide, and other industrial-grade acids. Technicians will operate and monitor large-scale production systems - including 3,000-gallon tank wagons, transfer pumps, and bulk containers - ensuring compliance with all OSHA, PSM, and environmental safety standards. The role requires a strong mechanical aptitude, attention to detail, and a commitment to maintaining a safe and compliant work environment. An Ideal Candidate for This Company Would Possess the Following Skills and Experience: Minimum 3 years of hands-on chemical handling experience in a manufacturing, chemical, or industrial setting. Demonstrated ability to safely handle hazardous materials (sulfuric acid, hydroperoxide, ammonium fluoride, etc.) while following strict PPE and safety standards. Knowledge of chemical compounding, sampling, and transfer operations, including documentation of process data and corrective actions. Understanding of hazardous chemical labeling, SDS requirements, signage, and safety symbols. Minimum 2 years of experience operating powered forklifts (sit-down and stand-up); certification preferred. Ability to safely load, unload, and transfer containers and bulk materials using forklifts and mechanical equipment. Knowledge of OSHA regulations, Process Safety Management (PSM), and Risk Management Plan (RMP) awareness standards. Experience with lockout/tagout (LOTO) and confined space procedures. Experience using LIMS, SAP, or comparable systems for data logging, maintenance requests, and sample tracking. Strong mechanical and electrical troubleshooting skills; able to identify and correct process deviations. Excellent attention to detail, organizational skills, and ability to work safely under minimal supervision. Comfortable using tablets, computers, and digital systems for documentation and process monitoring. Physically capable of lifting up to 50 lbs, climbing, bending, and working in confined spaces. Must maintain a valid Colorado driver's license and clean driving record. Willingness to obtain and maintain Emergency Response Team (ERT) certification (training provided). Ability to work rotating shifts and extended hours as needed in a 24/7 production environment. Front Range Staffing offers some great benefits, to include: Health, Dental & Vision Life Insurance Long Term/Short-Term Disability Sick Pay 401K Bereavement Pay Employee Referral Program If you're interested in this position, please submit your resume to jobs@frontrangestaffing.com and then call for immediate consideration. Front Range Staffing Ph: (719) 323-6632

Kelly Services, Inc. is a Fortune 500 company headquartered in Troy, Mich., providing employment to more than 700,000 employees annually, with skills including office services, accounting, engineering, information technology, law, science, marketing, light industrial, education, health care and home care. Kelly Services is an Equal Opportunity Employer. Job Description Kelly Services is now hiring for Machine Operators in Monument, CO and we need YOU! All eligible candidates will be offered paid training. Available Shift Times Are: 1st, 2nd, 3rd shifts available Qualifications To be considered eligible for this position you must: * Authorized to work in the United States * Have at least a High School diploma or equivalent (such as a GED) Also, previous light industrial experience preferred! Additional Information PERKS: • On-site cafeteria • Kelly-sponsored Affordable Care Act health care coverage available • Group insurance options • Holiday pay plan • Service bonus plan • Weekly electronic pay options

Full-time Description ***WE SPEAK SPANISH!! HABLAMOS ESPANOL!!*** This position participates on a cross functional team supporting operations, maintenance, customer load out and quality control to ensure the safe operation of the manufacturing process. KEY RESPONSIBILITIES Demonstrates a commitment to communicating, improving and adhering to safety policies in all work environments and areas. Operates computerized process control stations which control heavy manufacturing equipment in a minerals processing plant. Monitors and maintains quality control systems and procedures. Monitors and observes assigned area for abnormal conditions and emergency situations. Works and interacts with outside contractors, customers and agencies. Participates in safety reviews and other training activities. Maintains proper and safe process operations of the operating equipment. Performs maintenance related activities including welding, fabrication, housekeeping and other labor-intensive activities. Completes inspections and reports and deviations from standards. Loads out customer orders including bulk and bagging operations. Operates mobile equipment including skid loaders, wheel loaders, fork lifts, lifts and other heavy manufacturing mobile equipment. Upholds company values, understands and implements all company policies and procedures to ensure all work meets required standards. Position requires shift work including 12 hour shifts that may rotate supporting a 24/7 manufacturing operation. Requirements Demonstrates a commitment to communicating, improving and adhering to safety policies in all work environments and areas. Operates computerized process control stations which control heavy manufacturing equipment in a minerals processing plant. Monitors and maintains quality control systems and procedures. Monitors and observes assigned area for abnormal conditions and emergency situations. Works and interacts with outside contractors, customers and agencies. Participates in safety reviews and other training activities. Maintains proper and safe process operations of the operating equipment. Performs maintenance related activities including welding, fabrication, housekeeping and other labor-intensive activities. Completes inspections and reports and deviations from standards. Loads out customer orders including bulk and bagging operations. Operates mobile equipment including skid loaders, wheel loaders, fork lifts, lifts and other heavy manufacturing mobile equipment. Upholds company values, understands and implements all company policies and procedures to ensure all work meets required standards. Position requires shift work including 12 hour shifts that may rotate supporting a 24/7 manufacturing operation. RELATIONSHIPS WITH OTHER JOBS Reports to the Plant Superintendent KNOWLEDGE, SKILLS & ABILITIES Required Education: High School Diploma or GED. Field of Study Preferred: Industry related field experience preferred. Preferred Work Experience: 1-2 years in manufacturing operation including process control and maintenance experience. Preferred Computer and Software Skills : Knowledge of processing methods and laboratory techniques and equipment operation. Proficiency with MS Office. Additional Requirements: Knowledge of processing methods and appropriate planning techniques. Problem solving and analytical skills. Ability to read, analyze, and interpret technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Salary Description $19-$30

Are you eager to help shape the future of mobility and contribute to sustainability? Then Vossloh is the right place for you. Join our team and be part of innovative solutions that drive positive change in the transportation industry. Manufacturing Production manages or assists with managing various production activities (e.g., assembly, material forming/shaping, processing, treating, or packaging, etc.) including: •Planning, directing, and monitoring production to meet established specifications, schedules, volume/cost/wastage targets, and quality standards •Planning, prioritizing, and managing production line maintenance/downtime to minimize disruptions Your contact person Pavicich, Mary

Kelly Services, Inc. is a Fortune 500 company headquartered in Troy, Mich., providing employment to more than 700,000 employees annually, with skills including office services, accounting, engineering, information technology, law, science, marketing, light industrial, education, health care and home care. Kelly Services is an Equal Opportunity Employer. Job Description Kelly Services is now hiring for Machine Operators in Monument, CO and we need YOU! All eligible candidates will be offered paid training. Available Shift Times Are: 1st, 2nd, 3rd shifts available Qualifications To be considered eligible for this position you must: * Authorized to work in the United States * Have at least a High School diploma or equivalent (such as a GED) Also, previous light industrial experience preferred! Additional Information PERKS: • On-site cafeteria • Kelly-sponsored Affordable Care Act health care coverage available • Group insurance options • Holiday pay plan • Service bonus plan • Weekly electronic pay options

We're seeking a Production Technician who's ready to put your skills to work on projects that matter - and build a career with a company that's building North America. Job Title: Production Technician | Req ID: 15263 | HR Contact: Carla J. NAVARA | Location: Portland Cement Plant CO ABOUT THE ROLE Under the direction of the Production Coordinator, the Production Technician is responsible for maintaining and monitoring the efficient operation of all production processes. WHAT YOU'LL ACCOMPLISH * Exercise and encourage core values including but not limited to; developing self and coaching others by inspiration and empowerment * Responsible to maintain and monitor efficient operation of all production processes. * Make routine operation and preventative maintenance inspections of process equipment, report all unusual conditions, and prepare work orders for maintenance when required. * Operate dump trucks, skid loader, front end loader, forklift and other equipment. * Able to clean the preheater tower with jack hammers and air lances. * As directed, reclaim sand, iron ore, gypsum and clinker into the process. * Operate limestone reclaimers to face storage piles and position reclaimers prior to the start of reclaim operation. * As directed, lubricate, inspect, adjust or make repairs to process equipment. * Completion of the Area Safety Inspection, Mobile Equipment Checklist and any other documentation as required. * General housekeeping - keep work areas clean. * Must be able to work rotating shifts. * Demonstrate a commitment to communicating, improving and adhering to health, safety and environmental policies in all work environments and areas. Promote a culture of safety and exhibit these behaviors. * Other duties as assigned. WHAT WE'RE LOOKING FOR Education: High School diploma/GED Required Work Experience: 1-3 years Licenses Preferred: Valid Driver's License Required Required Computer and Software Skills: Basic knowledge about computers, Microsoft Office and SAP. Additional Requirements: * Must be able to climb stairs and ladders and work in both hot and cold environments. * Must be able to work in awkward positions for short periods of time. * Must be able to work in confined areas and elevated platforms (working at heights). * Knowledge of the cement manufacturing process and equipment a plus. * Able to obtain ATF clearance for handling of explosives * Read, write and speak English. * Basic computer skills. * Strong work standards and attendance record. * Class B or higher CDL is a plus. * Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests. Accepting applications until 1/15/2026 BUILDING INCLUSIVE WORKSPACES At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email recruiting-accommodations@amrize.com. This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted.