Production operator jobs in Orlando, FL - 505 jobs

Department: Utility Services Department Organizational Unit: County Water and Wastewater Position Type:Permanent Full Time/Part Time:Full Time Open Until Filled. Heavy Equipment Operator III - Utilities: $24.09 to $26.50 Heavy Equipment Operator II - Utilities: $23.05 to $25.36 Heavy Equipment Operator I - Utilities: $21.23 to $23.35 Selections for current vacancies will be based upon the candidate's highest level of education/experience/licensing. Please see the requirements listed below. Positions are available in the North, Central, and South areas of the County. Work schedule is Monday through Friday 7:00 a.m. to 3:30 p.m. and includes standby, overtime, and holidays as needed. Performs skilled crafts and trades work in the operation and routine maintenance of heavy equipment and may perform related manual labor. Employee may rotate among various pieces of equipment or may be permanently assigned to a specific piece of equipment. REQUIREMENTS: FOR EXTERNAL APPLICANTS ONLY: Must complete within nine (9) months of employment, all of the classes for the Brevard County Mandatory Training for the Development of New Employees PLUS must complete within twenty-four (24) months of employment, all of the classes for all three (3) phases of the Brevard County Employee Development Program and receive a passing score on each phase examination. Heavy Equipment Operator III: Three (3) years of experience in the operation and routine maintenance of heavy equipment; OR two (2) years of experience as a Brevard County Heavy Equipment Operator II PLUS successful completion of all three (3) phases of the Brevard County Employee Development Program and received a passing score on each phase examination PLUS a current annual performance evaluation score of 3.5 or greater and must be able to achieve departmental standards for operating equipment. Additional qualifying education and/or experience may be substituted one for the other on a year for year basis. SPECIAL REQUIREMENTS: Must possess, OR obtain prior to employment, a valid Florida Class A Commercial driver's license with a tanker endorsement and maintain both the said license and the endorsement during the term of employment. Must be able to pass a verbal proficiency test and effectively demonstrate the ability to safely operate the Excavator PLUS the Dump Truck with Trailer PLUS one (1) OR more of the following types of heavy equipment: Fuel Truck, Compactor, Backhoe, Loader, Vacuum Truck, Roller, End Loader, and/or Mowing Tractor. Must possess a current Florida Department of Transportation (FDOT) Maintenance of Traffic (MOT) Basic Flagger OR higher certification and maintain said certification in an active status during the term of employment. Must be able to work planned and unplanned overtime and standby and call-out duties on a rotational basis. Heavy Equipment Operator II: Two (2) years of experience in the operation and routine maintenance of heavy equipment; OR One (1) year of experience as a Brevard County Heavy Equipment Operator I PLUS successful completion of all of the classes for any two (2) phases of the Brevard County Employee Development Program and received a passing score on each phase examination PLUS a current annual performance evaluation score of 3.5 or greater. Additional qualifying education and/or experience may be substituted one for the other on a year for year basis. SPECIAL REQUIREMENTS: Must possess, OR obtain prior to employment, a valid Florida Class A Commercial driver's license and maintain said license during the term of employment. A tanker endorsement is preferred. Must be able to pass a verbal proficiency test and effectively demonstrate the ability to safely operate the Excavator PLUS one (1) OR more of the following types of minor heavy equipment: Fuel Truck, Compactor, Backhoe, Loader, Vacuum Truck, Roller, Dump Truck with Trailer, End Loader, and/or Mowing Tractor. Must possess a current Florida Department of Transportation (FDOT) Maintenance of Traffic (MOT) Basic Flagger OR higher certification and maintain said certification in an active status during the term of employment. Must be able to work planned and unplanned overtime and standby and call-out duties on a rotational basis. Heavy Equipment Operator I: One (1) year of experience in the operation and routine maintenance of heavy equipment; OR six (6) months of on-the-job training within the County in the operation of minor heavy equipment and must be able to achieve departmental standards for operating the equipment; OR successful completion of a six (6) month heavy equipment operator training program from an accredited school. Successful completion of coursework in heavy equipment operation at an accredited post-secondary school may be substituted on a year for year basis for a maximum of one (1) year (1,080 class hours [1 school year] : I year of experience; 120 class hours : I month of experience). Additional qualifying education and/or experience may be substituted one for the other on a year for year basis. SPECIAL REQUIREMENTS: Must possess, OR obtain prior to employment, a valid Florida Class B Commercial driver's license and maintain said license during the term of employment. A tanker endorsement is preferred. Must be able to pass a verbal proficiency test and effectively demonstrate the ability to safely operate one (1) of the following types of minor heavy equipment: Vacuum Truck, Fuel Truck, Compactor, Backhoe, Loader, Excavator, Roller, Dump Truck with Trailer, End Loader, and/or Mowing Tractor. Must possess OR obtain within six (6) months of employment, a current Florida Department of Transportation (FDOT) Maintenance of Traffic (MOT) Basic Flagger OR higher certification and maintain said certification in an active status during the term of employment. Must satisfactorily complete all of the Brevard County Mandatory Training for the Development of New Employees within nine (9) months of employment. Must be able to work planned and unplanned overtime and standby and call-out duties on a rotational basis. FOR ALL APPLICANTS: In the event of a hurricane, major storm, natural or man-made disaster, that may threaten the area, the employee will be required to perform emergency duties as directed. These positions are part of an established career ladder. PHYSICAL REQUIREMENTS CHECKLIST (With or without reasonable accommodations) PHYSICAL ACTIVITIES / TRAITS The employee must be able to: LIFT:50 lbs. or more CARRY:50 lbs. or more PUSH:50 lbs. or more PULL:50 lbs. or more In an eight hour day, the employee may have to: STAND:5 - 8 hours WALK:5 - 8 hours SIT:5 - 8 hours DRIVE:5 - 8 hours The employee must repetitively perform: Fine manipulation (ex. writing, wiring); Operating foot controls; Pulling; Pushing; Simple grasping (ex. pen, screwdriver) The employee must be able to: Balance; Bend; Climb; Crawl; Dig; Jump; Kneel; Reach; Run; Smell; Stoop The employee must have: Color Perception; Good distant vision; Good hearing; Good near vision; Good speech; Other; Use of both eyes Other necessary physical activities/traits N/A WORKING CONDITIONS Working conditionsthat will apply to the employee: At heights above/below ground level; Below ground level (ditches, tunnels, etc.; In cold; In dampness or chilly conditions; In heat; In high humidity; In or with dusty conditions; In or with moving objects or vehicles; In or with noisy conditions; On or with ladders or scaffolding; On slippery or uneven walking surfaces; Other working conditions; With chemicals or solvents; With electricity; With feet, legs or hands in water; With fumes, smoke, gases or flames; With grease; With hazardous materials; With lawn grasses, plants, etc.; With odors; With oils; With poor lighting; With poor ventilation; With silica, fiberglass, etc.; With vibrations (jackhammers, etc.); Work alone; Work inside; Work outside; Works Closely with Others Other working conditions: N/A

Our commitment to exceeding our customers' expectations for creating refreshing, high quality, and safe products manufactured in a sustainable way is central to The Coca-Cola Company's philosophy. As a Production Operator III, you'll bring your knowledge and experience to conduct a variety of tasks which are part of the production process in one of our world class manufacturing facilities. We're looking for individuals with attention to detail that enjoys working in a team environment. **What You'll Do for Us** Follows manufacturing procedures and guidelines to conduct a variety of tasks which are part of the production process, which can include loading materials into production machines; removing packs and sorting raw materials or finished products. Collects and disposes of garbage and production waste; cleans production equipment and work areas. Accountable for the set-up, operation and troubleshooting of equipment, including mechanical and programmable controls, as well as completing the necessary filler, conveyor and palletizer adjustments for changeovers. Visually inspect all incoming materials and outgoing products and make minor adjustments as needed. Perform and evaluate package integrity tests Assist forklift drivers with lower-level problems with pallets, slip sheets, and/or stretch wrappers Identify non-conforming product, such as poorly glued boxes, improper codes and/or labels Identify and report product or machine problems to production, maintenance, and/or warehouse personnel using plant intercoms and or 2-Way radios Monitor computer terminals and OIT screens **Qualifications & Requirements** High School diploma or equivalent is required. Ability to understand and communicate instructions in English with experience in a manufacturing/food production environment. A demonstrated ability to exceed performance expectations, especially in categories of attendance, safety, and teamwork is required. Must be familiar with and able to run automated equipment, including fillers and palletizers and operating casing equipment Must have a high mechanical aptitude to be able to sequence equipment for proper start-up and shutdown, understanding machinery and conveyor controls. The ability to do repetitive stooping, lifting 50 pounds, bending, and standing while operating equipment is required. Must possess a valid forklift license and be able to operate a forklift safely and efficiently Must be able to work an eight (8) hour shift with overtime and or extended hours as required and work any shift as directed **What We Can Do for You** **Experience:** A career with a global organization that give you limitless growth opportunities. **Benefits:** A full benefits package that starts on day one of employment. **Learning & Development:** The ability to learn manufacturing processes from a leader in the industry. The Coca-Cola Company will not offer sponsorship for employment status (including, but not limited to, H1-B visa status and other employment-based nonimmigrant visas) for this position. Accordingly, all applicants must be currently authorized to work in the United States on a full-time basis and must not require The Coca-Cola Company's sponsorship to continue to work legally in the United States. Pay Range:$50,357 - $61,547 Base pay offered may vary depending on geography, job-related knowledge, skills, and experience. A full range of medical, financial, and/or other benefits, dependent on the position, is offered. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class.

At Niagara, we're looking for Team Members who want to be part of achieving our mission to provide our customers the highest quality most affordable bottled water. Consider applying here, if you want to: Work in an entrepreneurial and dynamic environment with a chance to make an impact. Develop lasting relationships with great people. Have the opportunity to build a satisfying career. We offer competitive compensation and benefits packages for our Team Members. Production OperatorThis position is responsible for daily operations of the production floor; ensuring the shift meets established safety, quality, and production goals in compliance with all applicable legal and food safety requirements. Essential Functions Responsible for daily activities of the production line(s), ensuring product adheres to Niagara's standard of safety, quality, and throughput. Accurately completes applicable quality and production reports hourly. Physical and visual inspection of product is required to prevent non-conforming goods. Correctly reports all quality defects to the appropriate team members and shift leadership. Adheres to the highest standards of company and plant safety programs, guidelines, rules, and regulations. Abides by Niagara's Good Manufacturing Practices (GMP) and Food Safety Standards at all times. Maintains general housekeeping in all areas of production and additional areas assigned by plant leadership. Maintains appropriate level of raw materials as required, to ensure production lines incur minimal downtime. Demonstrates the aptitude and skill to work in all assigned areas of production; troubleshoots minor production line issues and performs relief duties when required. Regular and predictable attendance is an essential function of the job. Ability to work 12 hour shifts, day or night, on a rotating 2-2-3 schedule or schedule as dictated by production demand. Please note this job description is not designed to contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without prior notice. Qualifications Minimum Qualifications: 0 Years - Experience in Field or similar manufacturing environment 0 Years - Experience in Position 0 Years - Experience managing people/projects *experience may include a combination of work experience and education Preferred Qualifications: 2 Years - Experience in Field or similar manufacturing environment 2 Years - Experience in Position 2 Years - Experience managing people/projects *experience may include a combination of work experience and education Competencies This position embodies the values of Niagara's LIFE competency model, focusing on the following key drivers of success: Lead Like an Owner Makes safety the number one priority Keeps alert for safety issues and escalates immediately Effectively prioritizes tasks based on department goals Shows respect to others and confronts interpersonal issues directly Prioritizes resolution of customer issues effectively Responds promptly and honors commitments to internal and external customers InnovACT Makes recommendations to continuously improve policies, methods, procedures, and/or products Demonstrates adaptability by reacting appropriately to unexpected changes in situations or circumstances Increases performance through greater efficiency Find a Way Seeks to develop technical knowledge through learning from other experts Understands interdepartmental impact of individual decisions and actions Seeks solutions rather than placing blame Empowered to be Great Consistently looks for ways to improve one's self through growth and development opportunities Communicates clearly and promptly up, down, and across Communicates effectively to manage expectations Education Minimum Required: High School Diploma or GED Preferred: Associate's Degree Certification/License: Required: N/A Preferred: N/A Foreign Language Required: None Required Preferred: None Required Benefits Our Total Rewards package is thoughtfully designed to support both you and your family: Regular full-time team members are offered a comprehensive benefits package, while part-time, intern, and seasonal team members are offered a limited benefits package. Paid Time Off for holidays, sick time, and vacation time Paid parental and caregiver leaves Medical, including virtual care options Dental Vision 401(k) with company match Health Savings Account with company match Flexible Spending Accounts Expanded mental wellbeing benefits including free counseling sessions for all team members and household family members Family Building Benefits including enhanced fertility benefits for IVF and fertility preservation plus adoption, surrogacy, and Doula reimbursements Income protection including Life and AD&D, short and long-term disability, critical illness and an accident plan Special discount programs including pet plans, pre-paid legal services, identity theft, car rental, airport parking, etc. Tuition reimbursement, college savings plan and scholarship opportunities And more! *********************************************** * *Los Angeles County applicants only** Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, the California Fair Chance Act, and any other applicable local and state laws. Any employment agency, person or entity that submits a résumé into this career site or to a hiring manager does so with the understanding that the applicant's résumé will become the property of Niagara Bottling, LLC. Niagara Bottling, LLC will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Employment agencies that have fee agreements with Niagara Bottling, LLC and have been engaged on a search shall submit résumé to the designated Niagara Bottling, LLC recruiter or, upon authorization, submit résumé into this career site to be eligible for placement fees.

GENERAL PURPOSE This position is responsible for properly recognize the correct linen belonging to the account being processed. You must ensure there is no mixed, dirty, or damaged linen before feeding into the machine or hand-folding it. You must maintain a fast pace speed meeting company's expectations while practicing safety procedures. In addition, the Production Operators will help on making sure the machinery is working properly, by communicating with their leaders of any issues. DUTIES AND RESPONSIBILITIES Feeding machinery with sheets, Duvets, bathrobes pillowcases, towels, tablecloths napkins, mats Responsible for maintaining a clean and organized working station. Ensure the linen being process belongs to the account assigned. Identify any damaged, dirty, or mixed linen and properly place it in the correct containers. Maintain an average of 85% or above for production based on the IT system in place. (Spindle) Must be logged into the IT system in place. (Spindle) always while working on the machine. Will be required to perform other duties as requested, directed, or assigned. Qualifications QUALIFICATIONS High school diploma or equivalent preferred but not required. 3 months or more related experience in a commercial laundry or hotel industry. Ability to understand, comprehend, and follow simple instructions, short correspondence, and product labeling. Ability to add and subtract two-digit numbers. Able to work in a fast-paced environment. Ability to meet required performance goals and objectives. Ability to work in a team environment and alone. Good communications, both orally and written in English. Must have good attention to detail. APPLICABLE WORKING CONDITIONS WORKING CONDITIONS AMOUNT OF TIME TYPICALLY SPENT ON ACTIVITY Inside work: protected from weather conditions FREQUENTLY OCCASIONALLY RARELY NEVER Outside work: no effective protection from weather FREQUENTLY OCCASIONALLY RARELY NEVER Both inside and outside work: activities occur both inside and outside an office enclosure FREQUENTLY OCCASIONALLY RARELY NEVER Extreme cold: below 32 degrees for periods of more than 1 hour throughout the normal course of a day FREQUENTLY OCCASIONALLY RARELY NEVER Extreme heat: above 100 degrees for periods of more than 1 hour throughout the normal course of a day FREQUENTLY OCCASIONALLY RARELY NEVER Noise: employees must shout to be heard over ambient noise level (hearing protection required) FREQUENTLY OCCASIONALLY RARELY NEVER Vibration: exposure to oscillating movements of extremities or whole body FREQUENTLY OCCASIONALLY RARELY NEVER Potential hazards: moving parts, electricity, gas, scaffolding, chemicals, etc. FREQUENTLY OCCASIONALLY RARELY NEVER Terminal viewing: extended viewing of screens FREQUENTLY OCCASIONALLY RARELY NEVER Atmospheric conditions (in non-confined spaces): fumes, odors, mists, gases, poor ventilation, etc. FREQUENTLY OCCASIONALLY RARELY NEVER Oils: air and/or skin exposure to oils and other cutting fluids FREQUENTLY OCCASIONALLY RARELY NEVER Respirator: use of a respirator is required FREQUENTLY OCCASIONALLY RARELY NEVER Physical stamina: due to emergency or workload demands, subject to extended work hours requiring stamina beyond normal demands or levels FREQUENTLY OCCASIONALLY RARELY NEVER None: employee is NOT substantially exposed to adverse environmental conditions (work occurs in typical indoors, office or administrative environment) FREQUENTLY OCCASIONALLY RARELY NEVER ESSENTIAL ABILITIES AND FUNCTIONS ACTIVITY FUNCTION AMOUNT OF TIME TYPICALLY SPENT ON ACTIVITY Essential Non-Essential Rarely Occasionally Frequently Standing (on a hard surface) X X Stairs X Walking X X Sitting X X Twisting X X Stooping X X Crouching X X Crawling X X Talking X X Hearing X X Reaching X X Seeing X X Balancing X X Pushing up to 20 lbs. X X Pushing up to 50 lbs. X X Pulling up to 20 lbs. X X Pulling up to 50 lbs. X X Grasping X X Lifting or carrying up to 10 lbs. X X Lifting or carrying up to 20 lbs. X X Lifting or carrying up to 50 lbs. X X Feeling X X Moving (continuous motion) X X Using precise hand movements X X Reasoning or solving problems X X Reading X X Writing X X Performing mathematical calculations X X Adhering to deadlines under pressure X X Learning or retaining technical information X X Interacting with customers or visitors X X

Signature Systems Group is hiring multiple Machine Operators for our NIGHT SHIFT. Immediate openings available! Rotating days (4 days per week/ 3 days per week), Shift Differential and THREE weeks of PTO the first year! PM Shift - 6:45PM to 7:00AM (rotating weekends required) Must be able to speak and understand English. You will load and operate machinery to manufacture semi-finished parts (large composite/plastic matting parts) for assembly. Essential duties include: Move parts and materials to and from production or storage areas. Operate, troubleshoot, and optimize equipment for maximum cycle-time efficiency. Conduct quality control checks. Keep work area organized and clean. Qualifications and Requirements: Experience working in a manufacturing or industrial environment preferred. Must be able to lift 50 lbs. Must be able to adapt to environmental changes and working conditions; such as temperature and noise. Must have transportation to and from work. Forklift experience is preferred but not required PM Shift - 6:45PM to 7:00AM (rotating weekends required

Machine Operator - Night, Swing Join a growing company that protects people and property from the ground up. Why You'll Love Working Here: Competitive pay with shift options Fast-paced, team-oriented environment Advancement opportunities in a growing company third shift What You'll Do: Load and operate machines to produce large composite matting parts Monitor machine performance and adjust as needed Move materials to and from production and storage areas Perform quality control checks Keep your work area clean and organized Follow all safety rules and operating procedures What We're Looking For: Experience in manufacturing or industrial setting (preferred) Ability to lift 50 lbs and handle physical work Must be able to understand and communicate in English Comfortable working in hot, cold, or noisy environments Reliable transportation to and from work Forklift experience is a plus (not required) About Us:Signature Systems, a Myers Industries company (NYSE: MYE), manufactures high-performance composite matting and flooring for construction, utilities, oil & gas, stadiums, and world events like the Olympics and Super Bowl. We're a fast-growing company committed to quality, innovation, and outstanding customer service. Equal Opportunity EmployerMyers Industries, Inc. is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

About Clean the World At Clean the World, we believe business can and should be a force for good. Our mission is to reduce waste, protect the planet, and improve lives through sustainability, innovation, and social impact. Through our global operations, we recycle, redistribute, and repurpose hygiene and hospitality products, helping to save lives, reduce waste, and protect our planet. With over a decade of measurable impact, we continue to innovate solutions that align environmental responsibility with business growth. Our Values: Clean the World Genome Our people are united by shared values that define how we work and lead: Boldly Ask Why: We challenge convention to create progress. Driven by Purpose: Our mission drives our growth. Grit Gets It Done: We persevere, adapt, and execute with excellence. CARES: Compassion, Collaboration, Accountability, Respect, Resilience, Excellence, Sustainability. We don't just talk about impact - we deliver it, every day. Why Join Us When you join Clean the World, you join a global community of innovators, dreamers, and doers united by purpose. You'll have the opportunity to: Work with a division that directly drives global growth and sustainability. Be part of an award-winning organization recognized for innovation and social good. Collaborate with a passionate, mission driven team making a measurable impact every day. Thrive in a culture that values creativity, collaboration, and results. Role Machine Operator Recycling is responsible for operating and maintaining Clean the World's soap and plastic recycling lines. This role ensures continuous, efficient, and safe production by operating shredders, dewatering presses, mixers, plodders, cutters, and stampers used in the recycling and reforming of collected materials. The operator will be cross trained across both the soap and plastic recycling processes to maximize production output, ensure product quality, and maintain machine reliability. Key responsibilities (not limited to) Soap Recycling Line · Operate soap recycling equipment including mixers, refiners/plodders, cutters, and stamping machines. · Monitor feedstock consistency and adjust machine settings for optimal throughput and bar quality. · Inspect and maintain soap recycling machinery, ensuring cleanliness and efficiency. · Troubleshoot production issues and perform minor repairs or adjustments as needed. · Maintain accurate production logs and follow daily batch production schedules. · Adhere to quality control and safety procedures during all stages of soap reformation. Plastic Recycling Line · Operate industrial shredders and dewatering screw presses to process collected plastic bottles and containers. · Monitor feed material for contamination and ensure consistent flow through the system. · Adjust machine parameters to achieve optimal liquid removal and throughput. · Perform routine cleaning and preventive maintenance to ensure reliable operation. · Record output metrics, moisture levels, and system performance data. · Ensure proper handling and staging of processed plastic for downstream recycling partners. Qualifications Education: High school diploma / GED Experience : 3+ years of experience in a manufacturing, recycling, or processing environment. Experience operating extruders, plodders, shredders, or other continuous-feed processing equipment. Identify and correct machine performance issues. Ability to perform routine equipment maintenance, part replacement, and minor repairs. Understanding of production safety protocols and lockout/tagout procedures. Demonstrated ability to meet production goals while maintaining product quality. Comfortable working in industrial environments with heat, noise, and moving equipment. Excellent teamwork, communication, and documentation skills. Ability to lift up to 50 lbs and stand for extended periods. Willingness to cross-train and operate both soap and plastic recycling lines as needed.

Reports to: Production Supervisor The purpose of this position is to keep the work area clean and organized to provide a smooth work flow in support of the production team. Traits and Requirements: Must be at least 18 years of age Ability to concentrate and pay close attention to detail Eye-hand coordination to sort, grasp, color coordinate, and tag. Ability to read and write Physical Skill Requirements: Lifting and Carrying up to 50 lbs. Pushing and pulling 100-200 lbs. or force Standing 80% of the time Repetitive use of hands-80% of the time Reaching overhead-20% of the time Pushing and pulling-50% of the time Bending and crouching-70% of the time Grasping items with hands -90% of the time Working Conditions: Exposure to dust-ongoing continual basis Exposure to temperature fluctuations periodically Exposure to weather Flexible with scheduling changes due to store needs and sales events May require overtime on occasion due to store needs Supplies: Recycle and Trash containers Back brace (optional) Gloves (optional) Dust mask (optional) Essential Duties and Responsibilities % of Time Customer Engagement- Provides customers with fast, friendly and courteous service. Responds to customer's questions and/or takes initiative to find answers for them. Greet and assist customers on the sales floor while making eye contact and smiling. Respectful of property while loading or unloading. -As Needed Assessing Work Flow & Inventory - Empty trash as it accumulates. Remove empty carts and replace with full carts as needed by production team. Move discards to baling area. -80% Processing - Keep back lot clean of debris. Process furniture to designated areas. -20% Work Area - Maintain cleanliness and organization of the work area for safety and the most efficient production possible. Keep area free of debris and large items and entire area should be cleaned prior to leaving. -Continually Safety - Provides our customers and team members with a hazard free environment by following company safety guidelines and procedures. This includes cleaning up breakages or spills promptly, following guidelines and reporting any hazard or injury to a supervisor. -Ongoing Communication - Utility will communicate to Production Supervisor when dumpsters need to be emptied. Be cognizant of potential production obstacles in sorting and hanging that may slow down the teams' efficiency. -As Needed Meeting Targets - Regularly supports production in processing targets as assigned by production manager and reviews results and discusses opportunity improvements. -Continually This job description is not to be construed as a complete statement of duties, responsibilities or requirements. The percentages are approximate and can be different in each store.

Iron Heart Canning is the quality leader in mobile beverage canning, our strive for operational excellence sets us apart from the competition. With warehouses operating in 27 states, Iron Heart provides onsite canning support for breweries, wineries, and other beverage manufacturers. This is a full-time position as an Advanced Canning Technician, whose responsibilities include setting up and breaking down equipment, ensuring all Clean-In-Place procedures meet Iron Heart standards, and operating and maintaining the canning line. Starting compensation is $20/hr with benefits for all full time employees including paid sick leave, paid holidays, PTO, and medical/dental insurance. This is the perfect opportunity for craft beer enthusiasts looking to get into the brewing world. Iron Heart encourages all employees to learn and grow in the industry, providing onsite training and guidance along the way. Packaging Technician/Canning Line Operator Benefits: Paid Time Off Paid Sick Time Paid Holidays Medical, Dental, and Vision Insurance Life Insurance 401(k) Packaging Technician/Canning Line Operator Compensation: $20 per hour Packaging Technician/Canning Line Operator Duties/Responsibilities: Transport and set up/take down of heavy equipment in a box truck to and/or from canning runs Chemical Mixing and Sanitation Procedures Setting up and troubleshooting equipment such as labeler and date coder Consistent quality checks Keeping the equipment clean and up to IHC standards Full understanding of company policies and rules Collaborating with the other technicians and brewery staff Safely and efficiently operate heavy packaging machinery Packaging machinery repair and maintenance Mandatory lunch breaks Packaging Technician/Canning Line Operator Supervisory Responsibilities: Advanced Canning Technicians are expected to be able to operate independently and take responsibility for the jobsite, managing customer interactions while providing direction to the technicians onsite. Requirements Packaging Technician/Canning Line Operator Required Skills/Abilities: Understanding of mechanics Ability to learn onsite Multitasking Communication You'll need to pull 150-lb. pallets of cans, push the 800-lb. canning line into place (it is on wheels), stay on your feet for lengthy 8-12-hour shifts (federal/state law lunch breaks required), and perform other physical tasks as required. Flexible Schedule: Every week is different, depending on the breweries scheduled. Long hours and overnight stays are common. Hardworking: Pride in your work, self-motivation, attention to detail, and a positive attitude are all essential. Quick Learner: There is a lot to learn as our procedures and processes are always improving. Beer Knowledge: Home brewing or brewery experience is a big plus, as is a general appreciation for great craft beer. Education and Experience: High school diploma or equivalent required. 4-year college degree preferred but not required One year of packing machine operator experience preferred but not required Packaging Technician/Canning Line Operator Physical Requirements: While performing the duties of this job, the employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to a variety of conditions at job sites including loud noise, high and low temperatures and small working areas. Physical demands: Ability to continuously stand or walk Ability to bend, squat, climb stairs and lift frequently Ability to lift up to 50 pounds occasionally Ability to push/pull up to 800 pounds on wheels Ability to perform repetitive motion functions in support of canning line operations Salary Description $20/hr

Job DescriptionBenefits: 401(k) matching Bonus based on performance Competitive salary Free uniforms Opportunity for advancement Training & development Core Drilling Slab Sawing Wall Sawing Wire Sawing Asphalt Cutting Gas, Hydraulic, & Electric Cutting Equipment Remote Control Equipment Cutting & removal of concrete

Production Technician Job Description PT-7 Each SERVPRO Franchise is Independently Owned and Operated. Revised 6/12 Primary Role: Respond to service calls as needed. Perform services as assigned, following SERVPRO production guidelines. Communicate with crew chief to make sure all customer needs are met. Support crew chief and other production personnel, as needed. Clean and maintain vehicles, equipment, warehouse, and office areas, as needed. Results Expected: Production processes are performed according to guidelines and work orders. Communications to crew chief and customers are timely. Jobs are completed at or beyond customer expectations. Vehicles, equipment, and facilities remain clean, orderly, and working properly. 1. Executive: Manage Customer Satisfaction a. Notify crew chief of customer needs and concerns. • Communicate with crew chief regarding customer needs and successfully meet those needs. • Report any complaints about the performance of services. 2. Production: Production Processes and Jobsite Support a. Adhere to 1-4-8 job response. • Provide personnel availability for response to emergency services as required by SERVPRO response commitment. b. Perform production processes following SERVPRO production guidelines per work order per crew chief directions. •. Inventory and load the van with equipment, products, and supplies needed for jobs. • Set up staging area and equipment for each job. • Prepare rooms for cleaning processes. • Follow EZ Production Guidelines for all production processes. • Assist the crew chief and other production personnel. • Perform end-of-job/end-of-day cleanup and breakdown. c. Leave jobsite with a clean and orderly appearance. • Show respect for customer's home/property. d. Follow SERVPRO uniform policy. e. Develop production expertise in services, cleaning products, and equipment. • Participate in training activities on a regular basis. • Seek certification through the SERVPRO Employee Certification Training Program (ECTP) and relevant Institute of Inspection, Cleaning, and Restoration Certification (IICRC) certifications. • Enroll in all relevant training programs and achieve all relevant production certifications. • Read equipment and product directions and Material Safety Data Sheets (MSDS) to learn correct usage and application. • Learn how to properly operate equipment by reading owner's manuals and from training with other team members. Requirements Willingness to work hard and always put the customers' needs first. Have a "Yes We Can" Attitude

Work directly with the engineering team to develop new operation processes and operate various machines to produce quality parts as instructed. Ensure all operations adhere to company procedures and safety standards, contributing to a clean and efficient work environment. Responsibilities * Operate Electrical Discharge Machine (EDM), waterjet, air flow, and laser machines to produce quality parts as instructed by Operation Process Sheets. * Work with tools such as drill press, belt sander, orbital sander, swivel deburr, bench grinder, and other hand tools according to instructions. * Utilize inspection equipment to ensure product quality. * Complete documentation accurately and correctly scan on/off shop orders. * Utilize and understand operation process sheets and inspect parts per character control sheets. * Notify Supervisor immediately in case of damage, defect, or inability to proceed efficiently. * Collaborate effectively with team members and other departments as needed. * Use approved software and follow company processes and procedures. * Perform all tasks in a safe and reasonable manner according to the company's Employee Handbook. * Maintain a clean and safe work environment and contribute to the company's 6S program and Lean concepts. * Comply with all quality policies, specifications, regulations, and instructions. Essential Skills * Experience with EDM, fusion, and laser machines, with fiber optic laser experience being a plus. * Fusion hole drilling experience. * Ability to work independently or as part of a team. * Strong focus and attention to detail. * Proficiency in mid-level math skills, including working with whole numbers, fractions, and decimals. * Proficiency in using inspection equipment like calipers, micrometers, gage pins, and height gages. * Ability to read blueprints. * Ability to read and follow company processes, policies, and procedures. Additional Skills & Qualifications * Experience with fiber optic laser technology is desirable. Work Environment The role operates in a manufacturing, fabrication, and welding tooling shop environment. The position is for the 2nd shift from 3:30 PM to 12:30 AM, Monday to Friday. The engineering team works from cubicles off of the large, clean, indoor machine shop. Clients are primarily in the aviation and aerospace sectors, focusing on tooling and fabrication of parts. The company promotes a small, family-oriented environment with a team-first mindset. Job Type & Location This is a Permanent position based out of Palm Bay, FL. Pay and Benefits The pay range for this position is $60000.00 - $72000.00/yr. health/dental/vision insurance, 401(k) with company match, life/disability insurance, paid time off (PTO), tuition reimbursement, and wellness programs like counseling/dietitian access Workplace Type This is a fully onsite position in Palm Bay,FL. Application Deadline This position is anticipated to close on Jan 28, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

We are seeking day shift Production Laborers at our Orlando manufacturing plant. As a Production Laborer, you will assist in the production of steel framing stud products. Essential Functions: Safe operation of warehouse equipment Safe loading and unloading of materials Ability to lift, stand and move throughout the shift Responsibilities: Assisting Machine Operators in the production of Steel-Con products Packaging material and stacking material within the yard Loading and unloading trucks General duties throughout the manufacturing plant Forklift experience is preferred, but not required. Qualifications: Ability to consistently lift and carry construction materials Ability to stand, climb, reach, bend and twist throughout complete shifts What We Offer: Competitive Wages and an annual discretionary bonus! Advancement Opportunities! Great Benefits: medical, dental and vision insurance, paid time off, paid holidays and many more! Excellent Ways to Prepare for Your Future: 401K, short-term and long-term disability insurance and life insurance! Who We Are: We started in 1995 with the sole purpose of providing light gauge steel framing products to the residential and commercial construction market through our network of distribution partners. Our number one commitment is providing the highest quality product in our industry. With our state-of-the-art computer-controlled equipment and our substantial raw material supply, we have dedicated ourselves to being the industry leader in providing high-quality, cost-effective products.

Job Description This is the first step in manufacturing aluminum trailers. Must recognize and be conscious of quality, tolerance and accuracy of finished parts. Will operate ( brake press, benders, saws, belt sanders, CNC milling centers, and a shear ) in order to fill job orders. Will deburr, blow out all parts, stack and band all finished parts. Will operate and maintain set ups on special purpose machines where operations may involve several progressive machining sequences, and will give instructions on operating procedures. Requires complete knowledge of machine shop operations as acquired by on-the-job training and experience. Operation responsibility includes but are not limited to verifying blueprints, 1st piece inspections, proper measurements, safety of equipment operator is using, accurate count of parts and proper documentation on job orders. The work is repetitive and subject to processes inspection. Position Duties: Reads job order and blueprint specifications. Set up machinery for jobs to run efficiently with all parts checked to blueprint and job order. Operate machinery efficiently while maintaining 1st piece inspection on all parts, all 1st piece inspections are checked to the job order and blueprint. Demonstrate timely communication of needed materials. Responsible for the safety of the equipment he/she is using. Responsible for notifying supervisor of any and all repairs needed. Recognize obvious defective or damaged parts, incorrect sizes, faulty workmanship and general quality. Double check job order to finished part. Must be able to follow directives and procedures and complete paperwork. Ensure no material is used or moved unless it has a part number on it. All counts must be consistently accurate. Work area must be maintained as clean and organized. Work in compliance with all safety, quality and housekeeping standards in accordance with company policies. Performs other duties as assigned by management. Required Education: A high school and/or GED is preferred. Must be able to read tape measure and follow a job order. Good math skills are required, must be able to give accurate counts. Must pass a measuring test. Must be able to read blueprints, must pass a blueprint reading test with 85% accuracy or higher. Good verbal and written communication skills are required, must have legible penmanship. Training: Requires a fundamental knowledge of machine shop operations as required by short job training and experience. Must have some direct experience setting up some or all of the machines, brake press, punch press, drill press, benders, saws, belt sanders, shear, and CNC milling centers. Prefer direct experience instructing others and working as part of a team. Qualifications: Physically fit to perform lifting assignments with a weight limit of no more than 40lbs. Must be able to read blueprints and job orders within 90 days of start date. Job Type: Full-time 10 hour 4 days a week Benefits: 401(k) matching Dental insurance Employee discount Health insurance Health savings account Life insurance Paid time off Referral program Retirement plan Vision insurance Experience: CNC milling machine: 1 year (Preferred) Monday - Thursday 6am to 430pm

Job DescriptionBenefits: 10 Hour Work Shift 4 day work week Mon-Thurs 401(k) 401(k) matching Bonus based on performance Company parties Dental insurance Health insurance Paid time off Vision insurance Wellness resources Position Summary: Responsible for 1-2 sewing operations, or 1-2 bartack operations, or 1-2 assembly operations or any combination thereof by utilizing excellent, in-depth knowledge of company products, work instructions and procedures. Essential Duties and Responsibilities Follows Production drawings and work instructions to perform operations. Must understand canopy familiarization. Achieves time standards to learning curve. Meets all quality requirements, efficiency goals, and production schedule. Understands and utilizes the Lean & Cellular Manufacturing process for the continuous improvement of product, quality, efficiency, scrap reduction, safety, and ergonomics. Follows all safety rules and has basic understanding of machine operations where applicable. Performs preventive maintenance by keeping machine clean, blown out, and oiled. Wears safety glasses when using air hose to clean out machines. Must understand role in Kanban priority responsibility. Completes required production paperwork and barcode activity accurately. Performs self-inspection of all work and performs own rework as required. Keeps area clean and neat. Must be able to read First Piece canopy packages, Engineering Bulletins or Design Summary packages to familiarize on product. Performs other inherent duties related, but not limited, to the above. Education and Experience Requirements High School diploma or GED Equivalent required Previous sewing experience preferred, but not required Knowledge, Skills, and Abilities Must pass certifications of assigned operations. Must be capable of learning to operate a sewing machine. Must be able to read ruler measurements and possess self-inspection skills. Must be able to read, understand and follow written Standard Operating Procedure Specifications that are written in the English language. Physical Requirements Finger, hand and arm dexterity crucial for sewing canopy parts. Visual acuity necessary for seeing match marks and determine good versus poor stitch quality. Ability to lift materials weighing up to 50 pounds. Must have legible handwriting to complete required documentation. Must be able to sit, stand, bend and lift for extended periods of time depending on job task The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

COMPANY PROFILE: CaptiveAire is the nation's leading manufacturer of commercial kitchen ventilation systems, and now provides a complete solution of fans, heaters, ductwork and HVAC equipment. For over 40 years, we've led the industry with innovative technologies, unmatched service, competitive pricing, and rapid lead times. CaptiveAire maintains a network of over 90 sales offices in the U.S. and Canada and six strategically located manufacturing plants in North Carolina, Iowa, Oklahoma, California, Pennsylvania, and Florida. We are currently hiring Manufacturing & Production Technicians to perform general assembly in our Groveland, FL manufacturing facility. Join us if you are interested in working in a fast paced, financially sound manufacturing environment. Note: Satisfactory background check, and negative drug screen required SCHEDULE: Monday-Friday 6 a.m. - 2:30 p.m. Some overtime required WHAT WE ARE LOOKING FOR: Hard-working individuals, wanting to excel in their profession Strong organizational skills Self-starting team player with a positive attitude and good communication Considers attendance & punctuality a priority RESPONSIBILITIES: Perform work according to safety & quality standards and procedures Work effectively as a team member contributing to a positive workplace Finished work is expected to be neat, orderly, and repeatable Ensuring workspace is clean, safe, and in working order JOB REQUIREMENTS: Ability to use various hand and power tools Ability to lift up to 50 lbs independently Stand for long periods Basic mathematical skills Proficient in English EDUCATION: High school diploma or equivalent required. SALARY: Competitive wages based on experience Monthly bonus based on productivity and profits Perfect Attendance Bonus BENEFITS: Medical, Dental, Vision $100,000 Life Insurance & Long-Term Disability with Medical election Flexible Spending Account (FSA) 401k w/ employer match Paid holidays Vacation and sick days based upon tenure APPLY NOW! Apply To: https://www.captiveaire.com/Careers/Opening.asp?id=********** (include the code for the specific ad) Applications submitted for this position are valid for 60 days. Consideration for employment after 60 days requires a new application to be submitted. This position is classified as a safety-sensitive position. Employees in this position are subject to drug and alcohol testing in accordance with CaptiveAire's Drug-Free Workplace policy. Captive-Aire Systems, Inc. is proud to be an equal opportunity workplace. We review applications for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, ancestry, citizenship, age, uniformed services, genetic information, physical or mental disability, medical condition, marital status, or any other basis prohibited by law.

This position can be filled as a Water Treatment Plant Operator Trainee, C, B or A. Pay will be commensurate with the level of license held. Water Treatment Plant Operator Trainee - Salary Range $21.42 - $34.38/Hourly DOQ Water Treatment Operator C - Salary Range $24.69 - $40.47/Hourly DOQ Water Treatment Operator B - Salary Range $25.74 - $42.23/Hourly DOQ Water Treatment Operator A - Salary Range $26.83- $44.06/Hourly DOQ Under the supervision of the Operations Supervisor and the direction of an assigned Certified Operator, performs entry level work in the operation and maintenance of water treatment facilities and equipment. Work involves on-the-job training related to the maintenance of a water plant. Work is performed under close supervision. The supervisor provides instructions about procedures to be followed and training tasks to be performed and standards to be maintained. Work is reviewed periodically during the training period to note progress. Performs other work as required. Examples of Duties * Participates in an on-the-job training program involving practical, "hands- on" experience with plant operations under the supervision of a Water Production plant supervisor and/or a Certified Operator; reads and comprehends a variety of technical laboratory, operations, and maintenance procedures. * Starts and stops machinery and pumps via supervisory control and data acquisition system, regulates valves and observes instrumentation; adds chemicals according to prescribed standards. * Collects and analyzes various samples periodically and reports results; maintains simple records. * Performs cleanup work on equipment and daily/weekly assigned housekeeping duties. * Assists certified operator in all work and duties required in water treatment plant operations. Minimum Qualifications * High School diploma or G.E.D. (Proof must be uploaded with application). * Water Treatment Operator Trainee Qualifications: High School diploma or GED. Must have working knowledge of nomenclature of water treatment devices. A knowledge test will be given to all applicants whose applications meet all minimum requirements. Must have successfully completed a Florida Department of Environmental Protection approved training course for Water Treatment Plant Operator C-class licensure within the last five years and provide copies of approved coursework with application. Applicant must successfully pass Florida Department of Environmental Protection Water Treatment Plant C-class licensure examination within 6 months of hire. * Must possess a State of Florida Class "B" commercial driver's license with air brake endorsement. Applicants who do not currently possess a Class "B" CDL with air brake endorsement must acquire a learner's permit within 3 months of hire and obtain the license within 6 months of hire. Applicants who possess an out of state driver's license must obtain a Florida license within 10 days of employment. * Water Treatment Plant Operator C Qualifications: High School Diploma or GED. Must possess a current State of Florida Water Treatment Plant Operator class "C" license. Minimum of one year experience at the full performance level in a Water Treatment Plant Facility. Applicant who possess an out of state driver's license must obtain a Florida license within 1O days of employment. * Water Treatment Plant Operator B Qualifications: High School Diploma or GED. Must possess a current State of Florida Water Treatment Plant Operator class "B" license. Minimum of two years experience at the full performance level in a Water Treatment Plant Facility. Applicant who possess an out of state driver's license must obtain a Florida license within 1O days of employment. * Water Treatment Plant Operator A Qualifications: High School Diploma or GED. Must possess a current State of Florida Water Treatment Plant Operator class "A" license. Minimum of four years experience at the full performance level in a Water Treatment Plant Facility. Applicant who possess an out of state driver's license must obtain a Florida license within 1O days of employment. Knowledge, Skills and Abilities * Knowledge of the operation of mechanical and electrical equipment. * Knowledge of basic mathematics and chemistry. * Ability to read and understand technical manuals. * Ability to understand and follow oral and written instructions. * Ability to establish and maintain effective working relationships with co-workers and supervision. * Ability to readily learn the operation of laboratory equipment. Physical and Mental Requirements: * Able to print, draw, see, and read letters, numbers, words, characters, and symbols which are both large and small. * Able to use hands and fingers to perform titrations and other lab tests. Dexterity is required. * Able to hear, speak and understand conversation in English in normal tones of voice. Use of senses which include sight, smell, hearing and touch as aids in the evaluation and troubleshooting of malfunctioning equipment. * Able to hear normal conversations and communicate clearly, both orally and in writing. * Able to identify and distinguish colors. * Able to smell, identify, and distinguish odors in laboratory water tests. * Able to learn, understand, remember, and complete normal tasks without assistance. * Able to wear personal protective equipment. * Exposure to outdoors, heat, noise, vibration, confined work space, chemicals, mechanical hazards, and electrical hazards. * Able to go from a standing or sitting position to a bending, kneeling, or squatting position, or vice-versa, periodically. * Able to move back and forth and sideways while in a bending, kneeling, or squatting position. * Able to operate a car, pickup truck, and dump truck. * Able to work in adverse environmental and weather conditions (day or night). * Able to load or unload vehicles with objects weighing up to 50 pounds that may be awkward to hold. * Able to lift, carry, push, or pull items which weigh 50 pounds. * Able to walk, stand, sit for periods longer than 30 minutes and walk continuously for more than five minutes at a time. * Able to climb stairs four stories high. * Able to climb ladders 35 feet high and work on scaffolds. * Able to use a variety of hand and gas powered tools and equipment. * Able to work night, weekend and holiday work shifts. * Able to work double shifts (overtime). * Able to work around chemicals used in laboratory water tests and water treatment processes. The City of Melbourne offers a generous benefit package to include: * 100% City paid medical insurance for employee only; coverage available for family * Health Insurance opt-out incentive for employees with other medical coverage * Dental . Vision * Life Insurance in the amount of 1 times your annual salary * Additional life insurance to include coverage for your spouse and child(ren) * Short-term disability * Long-term disability * Flexible Spending and Dependent Care Account * Employee Assistance Program * Wellness Program * 457 Deferred Compensation * Retirement Plans (FRS, local plan for Police and Fire personnel) * Paid Holidays * Tuition Reimbursement For more information about benefits visit ************************************************************************************************************************ 01 The information provided in your application must support your selected answers in the supplemental questions. The information you provide will be verified and documentation may be required. Please be as honest and accurate as possible. You may be asked to demonstrate your knowledge and skills in a work sample or during an interview. By completing this supplemental questionnaire you are attesting that the information you have provided is accurate. Any misstatements, omissions, or falsification of information may eliminate you from consideration or result in dismissal. "See resume" is not an acceptable answer to the questions. * Yes, I understand and agree * No, I do not agree 02 What is the highest level of education you have completed? PROOF OF EDUCATION REQUIRED FOR THE POSITION YOU ARE APPLYING FOR MUST BE UPLOADED TO APPLICATION. * Did not complete High School Diploma or GED * High School Diploma or GED * High School Diploma or GED and Some College * Associate's Degree * Bachelor's Degree * Master's or Higher 03 Do you possess a valid State of Florida driver's license, or a valid out of state driver's license? * Yes * No 04 Do you possess a valid State of Florida or a valid out of state Commercial Driver's License with air brake endorsement? * Yes * No 05 Please indicate your class of driver's license. For example: Class E, CDL B, CDL A, etc 06 Have you completed a Florida Department of Environmental Protection approved training course for Water Treatment Plan Operator C-Class Licensure within the last five (5) years? Copies of approved coursework must be uploaded with application. * Yes * No 07 Do you have working knowledge of nomenclature of water treatment devices? * Yes * No 08 Do you currently possess a Florida Department of Environmental Protection Water Treatment Plant C-class or higher license? * Yes * No Required Question Employer City of Melbourne Address 900 E Strawbridge Ave. Melbourne, Florida, 32901 Phone ************ Website *********************************

A Production Technician L1 is an advanced generalist with specialty skills in lighting, audio/projection, carpentry or stage management in the Theater Operations Department and participates in the running of events and non-union shows. May act as Lead of the Day directing crews in operation of shows and events. Responsibilities include: point person for show set up and operation of audio, lighting, video and other theatrical equipment; general event setup and teardown; theatrical maintenance; and other physical tasks as assigned. The Production Technician L1 must be proactive in their work and planning, perform tasks efficiently with high quality, and display a customer service-oriented attitude. They must remain flexible while executing tasks and effectively communicate changing priorities to stakeholders. ESSENTIAL JOB FUNCTIONS/RESPONSIBILITIES Advanced practical knowledge of sound, lighting, and other stage equipment operation, as well as new programs and technologies in the execution of live shows and events. Review show advance documentation and prepares for work call. Coordinate show needs with Technical Director and Production Management. Lead and assist production crew. Inspect all equipment for any hazards prior to installation. Transport, lift and move equipment strategically and safely. Direct set-up of equipment; conduct pre-show/event testing of equipment; and run all equipment for the duration of the event/performance. Troubleshoot any equipment malfunctions; work quickly to resolve issues to client/guest satisfaction. Ensure all cords/cables are secured properly to prevent trip and fall hazards. Responsible for the safety and security of arts center equipment and any rental AV, Sound, Lighting and Staging equipment. Immediately report all equipment problems to the proper party. Power down and return equipment to proper storage areas or loading dock for pick up. When needed, work as Show Runner providing transportation of artist between hotel and venue site using arts center vehicle. (requires a valid FL driver's license) Works with minimal supervision when setting up spaces. Respond promptly and courteously to any last-minute changes. Anticipate the needs of the client/guest. Work cooperatively with Events Team, meeting planners, stage managers, etc. to assure client satisfaction for the smooth, efficient and successful operation of the event. May interact with client directly to achieve event or show needs. Follow all company safety and security policies and procedures. Adhere to local, state and OSHA safety requirements. Assist in the coaching and training of L1 and L2 staff. Act as a positive representative of the Dr. Phillips Center throughout an event or show. Follow and support all operational policies and procedures. Assimilate into the arts center culture through understanding, supporting and demonstrating the core values. Maintain a professional and friendly relationship with other departments, colleagues, and partners. Able to remain calm under pressure. Ability to work effectively with internal and external customers, some of whom will require high levels of patience, tact, and diplomacy. Maintain Dr. Phillips Center standards of customer service at all times. Able to effectively communicate in English in both written and oral forms. Other duties as assigned. KNOWLEDGE AND EXPERIENCE At least three (3) years of advanced practical Theater or Event support experience. Advanced proficiency in audio, video, carpentry/rigging and/or lighting techniques and equipment. Advanced rigging skills to include the ability to determine correct rigging hardware for flying items. Ability to safely weight and operate a fly system. Ability to read and understand stage ground plans, technical design drawings and industry specific paperwork as it pertains to the arts center inventory and make appropriate recommendations or substitutions. Thorough knowledge of backstage procedures and protocols; demonstrate correct headset use and etiquette. Experienced at leading teams during an assigned show/event or shift. Detail-oriented, good follow-through, and effective communication skills. Lighting skills: Proficient in operation and troubleshooting of all arts center lighting consoles. Able to complete power tie into Company Switch Able to lead a crew to hang and focus a light plot. Able to patch and set-up/configure lighting gateways/fixtures; function as lighting programmer and board operator. Able to provide multi-scene lighting design for events and shows. Audio skills: Proficient in operation and troubleshooting of all arts center Audio systems. Ability to create an Audio mic plot with knowledge of microphone types and their application. Able to reset power (audio). Fulfill Audio 1 role including system knowledge, and ability to mix musicians, performers and monitors. Stage Carpentry: assist in Steinmetz Hall stage changeovers and perform duties as a main or secondary driver or lead on Tower move. Preferred experience: Audio consoles and equipment: DigiCo SD Series, Yamaha CL Series, Allen and Heath Avantis and Shure Wireless Video consoles and equipment: EPSON Projectors, Panasonic and Blackmagic Lighting consoles and equipment: ETC EOS, HOG4, HES Moving Lighting, sACN and DMX Stage Management experience including show running, prompt book set up and organization for larger events and DPC presented shows. SPECIAL CONDITIONS OF EMPLOYMENT This position requires the ability to work a variable schedule, evenings, weekends, and holidays to meet operational needs. Able to move, lift, carry, push, pull and place objects weighing less than or equal to 40 lbs. without assistance. Able to load and unload various equipment carts, i.e. tables, chairs, road cases, etc. on a regular basis. Able to work outside in Florida heat and humidity (for plaza and off-site events) for up to 8 hours. Candidates must have a valid Florida driver's license.

CertaPro Painters is a leader in the residential and commercial painting industry throughout North America. We are an organization of professional painting contractors specializing in beautifying homes and buildings; interiors, exteriors, commercial, offices, and condominiums. Our success has been built on the foundation of delivering certainty to our customers - certainty of a job well done. We focus on the details of every project and most importantly, we focus on our clients. Overview Provide an exceptional experience for CertaPro Painters' customers to dramatically differentiate ourselves from our competition and to further ‘Deliver Extraordinary Experiences'. Fulfill the obligations of the essential functions; Production, Marketing, Quality Assurance, Administration, Safety, and Business Development. Responsibilities Provide an exceptional job opportunity for CertaPro Painters' Job Site Supervisors so as to differentiate ourselves from our competitors as the employer of choice in the painting labor workforce. Provide exceptional support to CertaPro Painters' Job Site Supervisors and build a performance culture among the team. Service all CertaPro Painters' customers with the objective of meeting their painting needs and building customers for life. Develop a close working relationship with the Residential Sales Associate and the Office Associate to ensure all expectations set forth with the customers are met and best executed. Develop a recruiting, development, and retention program for the Job Site Supervisors as well as properly onboarding them to setting them up for production success. Ensure that all field programs and systems are being executed. Responsible for providing ongoing training and inspections related to safety, as well as conducting safety meetings. Responsible for ensuring that all crews are following Occupational Safety and Health Administration (OSHA) guidelines, Environmental Protection Agency (EPA) guidelines around Lead Safety and possess and maintain the required Material Safety Data Sheets (MSDS). Qualifications and Skills 2-year degree in related field required Current driver's license and a good driving record. Position will travel to and from job sites and as needed. Expert in multiple finishes and paint applications. Exceptional communication skills with a friendly, positive demeanor Strong written/verbal skills, to include proof-reading and basic math skills for estimating High attention to detail and a strong work ethic Basic computer skills Proven record of ability to set, meet and exceed goals Must speak, read, and write English - Spanish speaking skills helpful but not necessary Previous experience in the paint industry preferred but not required Unrestricted driver's license and clean driving record Meticulous, clean, detail-oriented and taking pride in your work. Results driven Ability to work Monday-Friday with some Saturdays and some nights depending on the project. Benefits/Compensation: Competitive pay and benefits Each CertaPro Painters business is independently owned and operated. Compensation: $40,000.00 - $70,000.00 per year Opportunity is Knocking Qualities like working hard, getting the job done right, and fostering respect while working as part of a team are core to the CertaPro Painters brand culture. This makes each independently owned and operated CertaPro Painters franchise unique and fulfilling places to work. It is important to not only deliver memorable experiences for customers, but for team members of each independently owned and operated CertaPro Painters franchise, as well. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to CertaPro Painters Corporate.