Production operator jobs in Upland, CA

Initial Contract Length: 6 - 12 Months with extension highly likely Contract Type: W2 - Inclusive of employment benefits Full-time contracted Hours: 8 Hours per day, 5 days per week + Optional Overtime Pay rate: Open & Flexible - Priority here is finding the right people As a Composites Technician, you'll fabricate, assemble, and finish composite structures that make up our unmanned defence systems. You'll support both rapid prototypes (where speed and adaptability are key) and production builds (where consistency and precision drive mission success). You'll work shoulder-to-shoulder with engineers and fellow technicians, using advanced composite materials and processes to bring critical hardware to life. Key Responsibilities Perform lay-up, bagging, curing, trimming, and finishing of composite parts using prepreg, wet layup, and resin infusion techniques. Operate ovens and vacuum systems to cure composite structures. Trim and machine cured composite assemblies to tight tolerances. Drill, bond, fasten, and assemble composite substructures into final hardware. Conduct in-process inspections, measuring tolerances and identifying defects. Support prototype builds: adapting methods, iterating with engineers, and recording lessons learned. Support production builds: following controlled work instructions, ensuring repeatability, and meeting takt time. Handle sensitive materials and maintain clean work environments to prevent contamination. Maintain tooling and fixtures, reporting wear, and supporting continuous improvement. Uphold safety, quality, and documentation standards in line with defence hardware requirements. Basic Qualifications High school diploma or equivalent 1+ years of hands-on composite fabrication in aerospace, defence, automotive, or marine applications. Proficiency with hand tools, power tools, and precision measuring equipment. Ability to read and interpret engineering drawings and work instructions. Comfortable working in a fast-paced, high-expectation environment with tight tolerances. Physical capability to lift 25+ lbs, stand for long periods, and work in cleanroom/controlled environments. Preferred Qualifications Experience with prototype composite builds where processes are not fully defined. Familiarity with structural bonding, secondary bonding, and composite repair. Knowledge of defence or aerospace quality standards. Cross-trained in related areas: paint, coatings, metallics, or assembly.

Medical Device Technician (Direct Hire | Irvine, CA | M-F 7:00am-3:30pm) Play a Hands-On Role in Advancing Life-Saving Medical Technology Why You'll Love It Here ✅ Direct-hire opportunity with a stable, growing medical device manufacturer ✅ Day shift schedule (Monday-Friday, 7:00am-3:30pm) - no nights or weekends mandatory ✅ Excellent benefits package including medical, dental, vision, and 401(k) ✅ Paid holidays and two-week company-wide winter break ✅ Clean, professional, and mission-driven work environment ✅ Work that makes an impact - contribute to products that help save lives Key Responsibilities Execute receiving, trimming, fixation, die-cutting, and measurement processes for porcine pericardium tissue following approved procedures Use tools such as blades, scissors, forceps, dies, and microscopes to perform precise tissue processing Operate equipment such as fume hoods, presses, and measurement instruments in accordance with safety and GMP standards Verify work against specifications and record all activities per good documentation practices Maintain accurate Device History Records (DHRs) and ensure traceability of all materials and processes Support manufacturing, R&D, and engineering teams with process improvements and new product development Participate in root cause investigations for nonconforming materials Adhere to health, safety, and environmental regulations and company policies at all times Qualifications High school diploma or equivalent required 1+ year of experience in tissue processing, cleanroom, or medical device manufacturing environment preferred Familiarity with GMP and regulated manufacturing procedures Strong attention to detail and ability to perform precise, repetitive tasks Comfortable handling animal tissue and wet processes Basic computer literacy and solid communication skills How to Apply If you're looking for a stable, hands-on career in medical manufacturing where your work truly makes a difference, we'd love to hear from you. Apply today to join a professional team that values quality, teamwork, and innovation. All qualified applicants will receive consideration for employment without regard to race, color, national origin, age, ancestry, religion, sex, sexual orientation, gender identity, gender expression, marital status, disability, medical condition, genetic information, pregnancy, or military or veteran status. We consider all qualified applicants, including those with criminal histories, in a manner consistent with state and local laws, including the California Fair Chance Act, City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, and Los Angeles County Fair Chance Ordinance. For unincorporated Los Angeles county, to the extent our customers require a background check for certain positions, the Company faces a significant risk to its business operations and business reputation unless a review of criminal history is conducted for those specific job positions.

Responsibilities Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ************************** Follow: LinkedIn, Twitter, Instagram, Facebook, and YouTube. Howmet Fastening Systems (HFS) is seeking a Machine Technician II, EDM in our Torrance, CA location. HFS is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment. General Summary: Performs all types of precision EDM (Electrical Discharge Machine) work in steel and carbide to exacting tolerances. Studies part prints and decides on correct procedures to obtain dimensions and forms of finished products. Sets up parts on machines with proper power settings and depths. Checks final forms by taking molds or using other gauges to verify tolerances and finishes. Machinist will be held to established quality standards. Incumbent will have control to make minor adjustments to the process or machine after tasks are assigned. Specific Responsibilities: Program, set up and operate EDM. Plans the set up and sequence of operations by studying work orders, part prints, engineering prints and verbal instructions. Checks dimensions, finish material and nature of part to determine proper power setting and feed to hold specified tolerances and obtain required finish. Prepares necessary information for construction of electrodes to achieve desired results. Makes some electrodes of relatively simple geometry. Put the electrodes on the bars and in the machine. Loads and edits programs on machines. Receives assistance from EDM Programmer if programming is required Reads blueprints and has knowledge to use micrometers, calipers, comparators, thread gauges, depth micrometers and dial indicators as needed. Makes recommendations for alternate method to fabricate tools and parts. Performs other tasks as required Essential Knowledge & Skills Certified in Lock Out/Tag Out Ability to read and interpret blueprints Must have good communication skills and know basic shop math Must be able to read, write and understand English Must be able to lift/move up to 30 lbs. (may not exceed per EHS Policies) Qualifications Basic Requirements: High school diploma or general education degree (GED) preferred. Minimum 2-year experience in relevant machining experience or technical certification or associate degree in machining, manufacturing technology, or a related field preferred Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position. This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items. Preferred Qualifications: Solid understanding of machining principles, tooling selection, and process optimization for EDM Experience with CAD/CAM software for programming EDM machines Knowledge of materials commonly used such as titanium, aluminum, and specialized alloys Familiarity with ISO 9001. AS9100, or similar quality management systems Benefits/Salary: The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location. The salary range for this position is $17-$29/hr. About Us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ************************** Follow: LinkedIn, Twitter, Instagram, Facebook, and YouTube. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email [email protected] About the Team Howmet fastening systems are the premier aerospace and industrial fasteners, latches, bearings, fluid fittings and installation tools. Our products are used nose to tail on commercial and military defense aircraft, as well as on jet engines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.

Job Details Entry 0T534 CA - El Monte, CA Undisclosed N/A Full Time High School $17.46 - $23.62 Hourly None 2nd Shift Manufacturing 2nd Shift: 2:00 p.m. to 10:30 p.m. Who We Are: The Gill Corporation is one of the world's largest manufacturers of honeycomb, high performance floor panels, cargo compartment liners and original equipment for passenger and freighter aircraft. The company also excels in many other types of reinforced plastics including interior sandwich panels for creating structures such as aircraft galleys and bulkheads, honeycomb core and related products. Summary: We are looking for individuals with or without prior experience in production assembly. High attention to detail, accuracy, efficiency and a team player are key qualities to be successful in this role. Responsibilities: Primarily responsible for laying up panels and liners prior to the work order to load and unload into the press and assembling precut material slices (Balsa, Aluminum, Nomex) into panels or liners. Will check core accuracy according to work order and that orders are properly signed off on. Prepare and stage all left over materials to be returned back to warehouse. Ensures all materials used are within shelf-life requirements. Makes sure housekeeping is being maintained and all containers are properly labeled. Qualifications: Minimum 1-year Manufacturing experience (Assembly/Machine Operating/Warehouse) Basic PC Computer Skills Must be able to lift, push & pull a minimum of 50 lbs. Ability to reach, grab, pull and stand for entirety of shift. A minimum composite score of 240 on the Wonderlic Basic Math Skill Test is required. Benefits offered: Full range of medical benefits, dental, vision Life Insurance 401(K) and Profit Sharing Paid Vacation, Sick Leave and 10 Paid Holidays Tuition Reimbursement Employee discounts to theme parks, attractions, shows and more! Shift differentials ITAR Requirement: This position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants will be asked to provide specific documentation to verify U.S. person status under the ITAR and the EAR. A “U.S. person” according to their definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee, or asylee. The Gill Corporation is an Equal Opportunity Employer . Applicants for all job openings are welcome and will be considered without regard to race, religious creed, color, age, sex, gender identity, gender expression, genetic information, sexual orientation, national origin, religion, marital status, medical condition, physical or mental disability, military service, pregnancy, childbirth and related medical conditions, or any other classification protected by federal, state, and local laws and ordinances. The Gill Corporation provides reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disability Act and applicable state and local law. If you require an accommodation in the application process, please notify the Human Resources Department.

At Niagara, we're looking for Team Members who want to be part of achieving our mission to provide our customers the highest quality most affordable bottled water. Consider applying here, if you want to: Work in an entrepreneurial and dynamic environment with a chance to make an impact. Develop lasting relationships with great people. Have the opportunity to build a satisfying career. We offer competitive compensation and benefits packages for our Team Members. Production Operator (Days) 2-2-3 schedule This position is responsible for daily operations of the production floor; ensuring the shift meets established safety, quality, and production goals in compliance with all applicable legal and food safety requirements. Essential Functions Responsible for daily activities of the production line(s), ensuring product adheres to Niagara's standard of safety, quality, and throughput. Accurately completes applicable quality and production reports hourly. Physical and visual inspection of product is required to prevent non-conforming goods. Correctly reports all quality defects to the appropriate team members and shift leadership. Adheres to the highest standards of company and plant safety programs, guidelines, rules, and regulations. Abides by Niagara's Good Manufacturing Practices (GMP) and Food Safety Standards at all times. Maintains general housekeeping in all areas of production and additional areas assigned by plant leadership. Maintains appropriate level of raw materials as required, to ensure production lines incur minimal downtime. Demonstrates the aptitude and skill to work in all assigned areas of production; troubleshoots minor production line issues and performs relief duties when required. Regular and predictable attendance is an essential function of the job. Ability to work 12 hour shifts, day or night, on a rotating 2-2-3 schedule or schedule as dictated by production demand. Please note this job description is not designed to contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without prior notice. Qualifications Minimum Qualifications: 0 Years - Experience in Field or similar manufacturing environment 0 Years - Experience in Position 0 Years - Experience managing people/projects *experience may include a combination of work experience and education Preferred Qualifications: 2 Years - Experience in Field or similar manufacturing environment 2 Years - Experience in Position 2 Years - Experience managing people/projects *experience may include a combination of work experience and education Competencies This position embodies the values of Niagara's LIFE competency model, focusing on the following key drivers of success: Lead Like an Owner Makes safety the number one priority Keeps alert for safety issues and escalates immediately Effectively prioritizes tasks based on department goals Shows respect to others and confronts interpersonal issues directly Prioritizes resolution of customer issues effectively Responds promptly and honors commitments to internal and external customers InnovACT Makes recommendations to continuously improve policies, methods, procedures, and/or products Demonstrates adaptability by reacting appropriately to unexpected changes in situations or circumstances Increases performance through greater efficiency Find a Way Seeks to develop technical knowledge through learning from other experts Understands interdepartmental impact of individual decisions and actions Seeks solutions rather than placing blame Empowered to be Great Consistently looks for ways to improve one's self through growth and development opportunities Communicates clearly and promptly up, down, and across Communicates effectively to manage expectations Education Minimum Required: High School Diploma or GED Preferred: Associate's Degree Certification/License: Required: N/A Preferred: N/A Foreign Language Required: None Required Preferred: None Required Typical Compensation Range Pay Rate Type: Hourly$20.01 - $27.02 / Hourly Benefits *********************************************** * *Los Angeles County applicants only** Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, the California Fair Chance Act, and any other applicable local and state laws. Any employment agency, person or entity that submits a résumé into this career site or to a hiring manager does so with the understanding that the applicant's résumé will become the property of Niagara Bottling, LLC. Niagara Bottling, LLC will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Employment agencies that have fee agreements with Niagara Bottling, LLC and have been engaged on a search shall submit résumé to the designated Niagara Bottling, LLC recruiter or, upon authorization, submit résumé into this career site to be eligible for placement fees.

Avery Dennison Corporation (NYSE: AVY) is a global materials science and digital identification solutions company. We are Making Possible™ products and solutions that help advance the industries we serve, providing branding and information solutions that optimize labor and supply chain efficiency, reduce waste, advance sustainability, circularity and transparency, and better connect brands and consumers. We design and develop labeling and functional materials, radio frequency identification (RFID) inlays and tags, software applications that connect the physical and digital, and offerings that enhance branded packaging and carry or display information that improves the customer experience. Serving industries worldwide - including home and personal care, apparel, general retail, e-commerce, logistics, food and grocery, pharmaceuticals and automotive - we employ approximately 35,000 employees in more than 50 countries. Our reported sales in 2024 were $8.8 billion. Learn more at ********************** At Avery Dennison, some of the great benefits we provide are: Health & Wellness benefits starting on day 1 of employment Paid parental leave 401K eligibility Tuition reimbursement Flexible work arrangements Employee Assistance Program eligibility / Health Advocate Paid vacation and Paid holidays Job Description The Production Operator plays a vital role in ensuring the quality and efficiency of our manufacturing process. This involves inspecting materials and products, identifying and addressing quality issues, and maintaining accurate records. The ideal candidate is a team player with a strong work ethic, a commitment to quality, and the ability to operate basic production equipment. Potential shifts available: A Shift, 8am - 4pm B Shift, 4pm - 12am C Shift, 12am - 8am Activities and duties may vary depending upon site specific needs. Essential functions may include, but are not limited to: Perform material inspection and sorting, ensuring adherence to quality standards and specifications. Conduct in-process and final inspections, utilizing appropriate measuring tools and techniques to verify product conformance. Accurately record inspection data and maintain detailed quality logs, identifying trends and areas for improvement. Participate in root cause analysis and corrective action investigations, contributing to the resolution of quality issues. Collaborate with production personnel to ensure quality standards are met throughout the manufacturing process. Maintain a clean and organized work area, adhering to 5S principles and safety protocols. Actively participate in continuous improvement initiatives, suggesting and implementing process enhancements to improve quality and efficiency. Train and mentor new employees on quality procedures and work instructions. Operate and maintain basic production equipment, ensuring proper setup and calibration. Qualifications Requirements: High School Diploma or equivalent (GED) or 3+ years of relevant manufacturing work experience. Ability to lift up to 50 pounds. Able to obtain Lift Truck Operator's license. Able and willing to work overtime, including short-notice requests. Demonstrate proficiency with computer applications. Maintain a service and quality focus, addressing issues and communicating root causes. Contribute actively in a team environment, promoting open communication. Demonstrate proficiency in key tasks, embrace learning and knowledge sharing, and engage in cross-training. Possess flexibility and dependability to support production and customer focus. Physical Requirements: Movement: May require the ability to stand/walk for up to 80% of your shift, with frequent pushing, pulling, bending, reaching, and squatting 50% of the time. Lifting: May require the ability to lift up to 50 pounds 50% of your shift. Environment: May require being comfortable working in an environment with varying temperatures. Important Note: Reasonable Accommodations: We are committed to providing reasonable accommodations to qualified individuals with disabilities. If you require any accommodations to perform the essential functions of this job, please let us know during the application process. Pre-Hire Medical Questionnaire: Upon accepting a role, you will be required to complete a pre-hire medical questionnaire. This is a standard procedure to ensure your ability to safely perform the job's physical demands and to identify any potential health concerns. Falsification of Medical Information: Falsifying information on the medical questionnaire is a serious offense and may lead to disciplinary actions up to and including termination. Additional Consideration: Safety: We prioritize the safety of all our employees. We provide comprehensive safety training and a safe working environment. The hourly rate for this position is $18.94-$22.73 / hour. The hiring wage rate range above represents what Avery Dennison reasonably expects to pay for this position as of the date of this posting. Actual salaries will vary within the range. In some circumstances, this may be above or below the range (based on various factors, including, but not limited to, a candidate's relevant skills, experience, education and training, location, as well as the job scope and complexity, responsibilities, and regular and/or necessary travel required for the position). That may change, depending on the candidate pool. Avery Dennison reserves the right to modify this information at any time, subject to applicable laws. Additional Information All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or other protected status. EEOE/M/F/Vet/Disabled. All your information will be kept confidential according to EEO guidelines. If you require accommodations to view or apply for a job, alternative methods are available to submit an application. Please contact ************ or [email protected] to discuss reasonable accommodations.

Dreaming big is in our DNA. It's who we are as a company. It's our culture. It's our heritage. And more than ever, it's our future. A future where we're always looking forward. Always serving up new ways to meet life's moments. A future where we keep dreaming bigger. We look for people with passion, talent, and curiosity, and provide them with the teammates, resources and opportunities to unleash their full potential. The power we create together - when we combine your strengths with ours - is unstoppable. Are you ready to join a team that dreams as big as you do? SALARY: $33.83/hr + 4.25 hours of daily OT SHIFT: 12 hours (rotating days/nights) every quarter COMPANY: Michelob ULTRA. Cutwater Spirits. Budweiser. Kona Brewing Co. Stella Artois. Bud Light. That's right, over 100 of America's most loved brands, to be exact. But there's so much more to us than our top-notch portfolio of beers, seltzers, and more. We are powered by a 19,000-strong team that shares our passion to create a future with more cheers. We look for people with talent, curiosity, and commitment and provide the teammates, resources and opportunities to unleash their full potential. The power we create together - when we combine your strengths with ours - is unstoppable. Are you ready to join a team that dreams as big as you do? ROLE SUMMARY: Sitting behind a desk all day was never your style. Rolling up your sleeves and solving tangible problems? That's more like it. If you are passionate about maintenance and troubleshooting while working in a fast paced environment, Anheuser-Busch could be your last stop in fulfilling your career. Our Maintenance Technicians are the key in guaranteeing that our quality is where it needs to be: the very best. If you are looking for a new challenge, come join our team today! As a Maintenance Technician, you will operate, maintain, troubleshoot, and repair high speed manufacturing equipment. You would also be responsible to perform quality checks by using powerful quality reporting systems. If you think you've got what it takes, we want to hear from you! JOB RESPONSIBILITIES: * Operate, maintain troubleshoot and repair high speed manufacturing equipment * Responsible for prioritization of operation and maintenance on multiple pieces of manufacturing equipment * Perform quality checks and recording them in our automated quality control systems * Interpret data to make quality and productivity decisions, we're a data driven company * Perform routine and emergency maintenance on process equipment * Maintain our work area in accordance with all sanitation and housekeeping standards, safety is our first priority JOB QUALIFICATIONS: * High School Diploma or GED * 1-3 years of industrial experience, preferably in a high-speed manufacturing or packaging environment * Proficient in mechanical troubleshooting * Able and willing to work a rotating 12-hour and other alternate work schedule, including day and night shift rotations, and required weekend and holiday hours * Able and willing to work mandatory overtime as required * Superior work history, including good attendance * Knowledge of safety policies and procedures WHY ANHEUSER-BUSCH: At Anheuser-Busch, our purpose is to create a future with more cheers. For more than 165 years, we have delivered a legacy of brewing great-tasting, high-quality beers that have satisfied beer drinkers for generations. 99 percent of the products we sell in the U.S are made in the U.S. with more than $700 million in high-quality ingredients sourced from American farmers and more than $7 billion in goods and services purchased from U.S. suppliers, and we have invested nearly $2 billion in our 100 facilities across the country over the past five years. Through these investments, and as a leading American manufacturer and the nation's top brewer, we drive economic prosperity nationwide through investments in our people, facilities, and communities. We are the only brewer that invests in the U.S. at this scale. BENEFITS: * Health benefits including Medical, Dental, Vision, Wellness and Tax-Advantaged Savings and Spending Accounts * Life Insurance and Disability Income Protection * 401(k) Retirement Savings options with a company matching contribution * Chance to work in a fast-paced environment among a company of owners * Free Beer!

Energy: Forget about blending in. That's not our style. We're the risk takers, the trailblazers, the game-changers. We're not perfect and we don't pretend to be. We're raw, unfiltered, and a bit unconventional. Our drive is just like our athletes, unrivaled. The power is in your hands to define what success looks like and where you want to take your career. It's not just about what we do, but about who we become on along the way. We are much more than a brand here. We are a way of life, a mindset. Join us. A Day in the Life: As a Machine Operator at Monster Energy, you'll be at the heart of our production process, responsible for operating and maintaining equipment to ensure that production tasks are completed efficiently and accurately. Your efforts will ensure that production tasks are carried out with precision and efficiency, upholding the exceptional quality and standards that define Monster Energy's products. The Impact You'll Make: Operate and monitor line, removing or shifting materials and/or finished product as necessary to facilitate proper flow and machine operation. Ensure package and product quality. Operate all manufacturing equipment efficiently and safely. Performs all running maintenance, housekeeping and organizing. Execute light duty troubleshooting. Maintain clean work area throughout good housekeeping practices. Clean equipment during and after shift. Perform CIP/Sanitation as required. Expedite repairs to line, working with maintenance as necessary. Act as a member of team to deliver results and react to issues appropriate for situation Monitor, measure and report system performance. Conducts all quality control requirements. Perform product and package changeovers. Maintain accurate and current records of down time and machine operations Communicate with manager, mechanics, and other operators to solve problems, take direction and assigned work. Utilizes computer- based workstation systems. Who You Are: Prefer a Bachelor's Degree in the field of -- Heavy Machinery, Operations or related field of study Additional Experience Desired: Between 1-3 years of experience in a machine operator role Additional Experience Desired: Between 1-3 years of experience in manufacturing environment Computer Skills Desired: Microsoft office Additional Knowledge or Skills to be Successful in this role: Knowledgeable about the limits and capabilities of different machines is essential for optimal performance. Monster Energy provides a competitive total Compensation. This Position has a range of $20-$26/ hourly. The actual pay may vary depending on your skills, qualifications, experience, and work location.

Job Description Department: Exhibition Design and Productions Reports to: Manager, Exhibitions Graphic Design Job Type: Temporary - Part-time Job Classification: Hourly (Non-exempt) Workplace Location: Los Angeles - Academy Museum Summary/Objective: The Academy is seeking a detail-oriented Graphic Production Technician to assist in executing exhibition graphics and didactic materials. This role is responsible for formatting design templates, preparing files for print production, coordinating with vendors, and ensuring high-quality, cost-effective production. The ideal candidate has a strong understanding of print processes, materials, and fabrication, along with excellent organizational and communication skills. Essential Functions of the Job: Prepare and refine artwork for print production, ensuring accurate color, resolution, and file setup. Work closely with designers to maintain the integrity of creative concepts while optimizing production feasibility. Oversee file handoff to fabricators and printers, ensuring files meet specifications and production deadlines. Create and manage Requests for Proposals (RFPs) for print and fabrication vendors. Negotiate vendor estimates and ensure cost-effective production without compromising quality. Collaborate with internal departments to value engineer solutions that balance design intent with budget and production constraints. Maintain production schedules, ensuring timely execution of deliverables. Oversee test prints, material proofs, and installations as needed. Assist with installation and troubleshooting of exhibition graphics when required. Required Competencies: Associate or technical degree, or equivalent on-the-job experience. 3+ years of experience in production art, print production, or a related field. Advanced proficiency in Adobe Creative Suite (Illustrator, InDesign, Photoshop). Knowledge of print production, substrates, and fabrication methods. Strong attention to detail and ability to troubleshoot pre-press issues. Excellent project management and communication skills. Preferred Qualifications: Experience working in museums, galleries, or cultural institutions. Familiar with large-format printing, vinyl application, and environmental graphics. Understanding of accessibility standards for exhibition graphics. Required Vaccination: Full vaccination against COVID-19 is required, including any booster vaccinations as applicable. Exception: Medical and religious accommodations approved by the Office of People & Culture. Compensation: The expected base salary for this role is $28.00 per hour. The actual base pay offered will be determined by factors such as experience, skills, training, location, certifications, education, and other factors permitted by law. Decisions will be made on a case-by-case basis. @museum LI Powered by JazzHR qz AekYkCIy

At 4over, we are committed to building a diverse and inclusive workplace welcoming to people of all backgrounds. Providing our employees with job training and opportunities for growth, development, and advancement. We take pride in fostering a safe environment for all employees, Summary: The Bindery Production Assistant is responsible for helping the Bindery Operator with the setup, adjustment and safe operation of all relevant bindery equipment such as: MBO folders with pile and continuous feeders; Heidelberg/Stahl Folders with continuous feeders; and 6 pocket Muller Martini-Presto saddle stitchers to produce quality finished products that meet customer specifications and quality standards. Schedule: 1st shift: Monday-Friday, eight or more hours per day, five days per week based on business needs. Primary schedule will be 5:00 AM - 1:30 PM, Monday - Friday, or similar. Training may occur at other times. Salary Range: $18.00 - 20.00 Hourly Compensation commensurate with experience. At this time, we are not engaging with agencies or third-party recruiters. Thank you for your understanding. Essential Duties and Responsibilities include the following: * Checks paper sheet size/type etc., and verify materials required * Assists with managing the preparation of next jobs to be printed * Assist with press maintenance tasks and cleaning * Support the Lead Press Operator by completing tasks as directed to keep the press running * Actively remove waste items for recycling * Complete and maintain all required paperwork, records, documents, etc. * Ensure all equipment, tools, and workstation are in good working order and is free of safety hazards * Report workplace hazards to management immediately * Wear all assigned Personal Protective Equipment (PPE) when required * Report all work related injuries, illnesses, and/or near misses to management immediately * Keep all work area/station in compliance with our housekeeping guidelines * Follow and comply with all safety and work rules and regulations * Maintain departmental housekeeping standards, such as keeping floors swept and absent of debris that may be a work hazard * Regularly perform general housekeeping duties in your work area(s) * Adhere to all safety policies and protocols and maintain a safe working environment * Attend all department/company meetings * Other duties as assigned For an extensive listing of duties and responsibilities please refer to the attached Job Description. Qualifications * 1 years' experience of working within a fast-paced production or manufacturing environment Preferred * High School Diploma or GED equivalency, preferred 4over Company History: 4over was founded in February of 2001. What started off as creating business cards and web page designs by a husband and wife, quickly flourished. Since the company was founded, we are now a private equity owned company growing and expanding across many states. Through our 4over Core Attributes, we are committed to meeting and exceeding customer expectations, cultivating and nurturing our relationships, providing excellence and caring for others. Health and Life Insurance- * Medical, Dental, Vision, Life/AD&D Insurance, Disability, and Flexible Spending Accounts (FSAs) for Health Care and Dependent Care * 4over pays 100% of the employee's premium for his/her Basic Life/AD&D Insurance in the amount of 1x the employee's annual salary, up to $500,000 * Coverage will be effective on the 1st of the month following 1 month of continuous regular full-time employment 401(k) Retirement Plan * New employees are eligible to enroll the first of the month, following 1 month of employment * Semi-annual open enrollment (January 1st and July 1st) * Discretionary employer match; typically, 50% of employee deferrals up to 6% of compensation * Immediate Vesting Holidays and PTO * 9 Paid Holidays * Accumulating PTO to be used after 90-days of continuous and active full-time service 4over is an Equal Opportunity employer. It provides equal employment opportunities to all employees and applicants for employment without regard to race, color, sex, national origin, age, religion, disability, or any other legally protected status and takes affirmative action to recruit, employ, train, and promote qualified minorities, women, covered veterans, and individuals with disabilities.

Responsible for performing manual fabrication operations, as well as operating basic machine shop tools and other fabrication machinery, to produce parts within an expected timeframe. ESSENTIAL FUNCTIONS OF THE JOB: Operates a variety of machines, tools and other equipment (with major emphasis in hydraulic or pneumatic presses, bench grinders, abrasive blasting machines, vibratory tumblers, rotary deburring and polishing tools, but may also include lathes, mills, drill presses, grinders, and manual operations) to produce, assemble or test parts per instructions, blueprints or other technical drawings. Properly maintains and performs minor routine maintenance to machines utilized. Evaluates parts or material by measuring with appropriate instruments and may perform simple testing to validate parts or material conforms to requirements. Documents information as required per the work instruction or as instructed and reports any discrepancies to the supervisor, lead, and/or engineer. Maintains a safe work environment and adheres to all safety procedures and protocols, including the use of personal protective equipment (PPE). Supports area organization and fosters a continuous improvement mindset. Adheres to the company's policies and promotes a healthy and positive work culture. The preceding functions have been provided as examples of the types of work performed by employees assigned to this job function. Management reserves the right to add, modify, change or rescind the work assignments of different positions and to make reasonable accommodations so that qualified employees can perform the essential functions of the job. EDUCATION: High School diploma or General Education Degree (GED) preferred. EXPERIENCE: 0-2 years of factory experience KNOWLEDGE/SKILLS/ABILITIES: Must be able to read blueprints Must read, write and speak English Ability to apply common sense understanding to carry out instructions furnished in written, oral or diagram form. Ability to work well with engineers, supervisors and other machinist. Able to manage tasks and meet production deadlines. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be a U.S. Person which is defined as a U.S. citizen, a lawful permanent resident [“green card” holders], U.S. National, Refugee, or Asylee. Please note that the salary range information is only applicable for California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee's pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Salary Range: $18-22 hourly. Relocation assistance not available and we are only considering local candidates. RBC Bearings is an Equal Opportunity Employer to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws

Job Description Qualifications: This site uses Kronos for timekeeping. Manufacturing Forklift experience Packaging Responsibilities: Manufacturing Forklift experience Packaging Comments/Special Instructions What is the working schedule for this position - 1st shift, 6:00 AM - 2:30 PM What experiences/skills would stand out on a resume for this position (Must haves VS Nice to have) - We would like someone with prior manufacturing experience. Will there be a possibility of an extension for this role or is this a temp- to -perm - There may be an opportunity to hire permanently for this role. Will Overtime be offered - We may have OT as well. What would the interview process look like (in-person or teams, will there be a 2nd interview) - In-person interview Does the worker need to come with PPE, or will it be provided if required if needed - We will provide the PPE\'s, but the worker needs to have steel toed boots. Is the facility a temperature-controlled environment - Yes.

Our Culture DZYNE Technologies is leading the future of autonomous defense. Based in Irvine, California, we develop and manufacture advanced airborne and ground-based defense solutions deployed in over 50 countries. Backed by U.S. Government Programs of Record, our technologies are field-proven, scalable, and production-ready. We're growing fast and looking for innovators ready to make an impact. At DZYNE, you'll join a culture built on collaboration, integrity, and purpose. We celebrate wins, value diverse perspectives, and support every team member's success. Ready to do work that matters? Join us. Position: Senior SUAS Test Operator Location: Irvine CA Travel: Up to 50%, both CONUS and OCONUS Position Description: This position will be filled with a highly motivated Senior Small UAS Test Pilot with a passion for developmental flight test and improving system capabilities. Senior UAS Test Pilot candidates must be able to safely manage and conduct the operation of developmental small unmanned aerial system (UAS) platforms. This position is highly flexible and requires a high degree of competence. Candidates must be able to operate in environments that do not have fully developed documentation and training courses and be able to develop them throughout all stages of the development cycle. Candidates must have the ability to create, review, edit, and publish crew training documentation, checklists, operations manuals, and a other documents required to fulfill contract requirements. Fluency with Microsoft Office, Adobe Acrobat, and similar computer applications is essential to fulfill this role. The candidate must be able to communicate effectively with team members, management, and customers in both written and verbal form. CONUS development flight test and intermittent OCONUS operations are to be expected. Required Skills and Responsibilities: * Maintain a high degree of professionalism including punctuality and accountability * Current FAA SUAS Remote Pilot Certificate * 100 hours (or at least one year) of relevant SUAS flight experience while acting as Remote Pilot in Command * Five years of relevant work related to UAS flight operations, or equivalent * Must demonstrate extensive understanding of UAS and aeronautical principles, theories, and concepts. * Must have excellent analytical, interpersonal, verbal, and written communication skills to efficiently collaborate with aircrew, management, civilian and government customers, and contractors * Must be fluent with Microsoft Office and Adobe Acrobat for documentation development * Must be able to work both independently and lead in a team environment. * Must be willing to work extended or non-traditional hours when required. * Must have a team-first attitude and drive for system success. * Ability to support five (5) complete on-site workdays per week during CONUS test and flight operations * Perform other duties as directed by supervision and management for the benefit of the company, program, or employee(s). Preferred Skills/Qualifications: * Any piloting experience in addition to SUAS is desired (e.g. sport, recreational, private) * Experience with RC model aircraft * Experience obtaining approvals to fly SUAS in military or civilian airspace to include waiver applications * Experience with Ardupilot-based SUAS * Experience flying SUAS in a deployed or unfamiliar flight environment that requires detailed planning and coordination * Degree in mechanical or electrical field or other relevant technical fields * Ability to obtain a Secret security clearance, or higher. Travel Required: Up to 50%, willing to support CONUS Flight Test and/or deploy overseas to austere/non-permissive environments a minimum of three months at a time. CONUS travel is also expected. Working Conditions * The diversity of work conditions may range from an austere test environment (outdoors, all seasons) to an indoor environment such as a general office environment or workshop. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. * This position is subject to both inside and outside environmental conditions * This position is subject to a variety of physical and atmospheric conditions * This position will require the use of Personal Protective Equipment (PPE) * This position is subject to working conditions peculiar to the specific assignment. (e.g., required to perform work-related travel worldwide and may include hardship and combat areas) * This position will require the ability to lift 50 lbs. consistently (e.g. assistance to load, unload, and emplace ground equipment; and the ability to work for a long period of time on one's feet * Prior to interview, candidates will be asked to provide flight records. Other Requirements: It is an essential requirement for the person in this role to have a legal right to work in the United States and be eligible to obtain any required Export Authorization and DoD Clearance. Salary: $90,000-$130,000 annually Salary depends on relevant work experience, education, training, essential skills, and/or other factors such as specialized or high-demand professions. In addition to the annual salary, the position will be eligible for an annual bonus. The pay range for this job level is a general guideline only and not a guarantee of salary or annual bonus. Benefits: Our benefits are DZYNE'ed for your overall health and financial wellness. DZYNE provides comprehensive medical, dental, and vision plans, employee life and accidental death, and disability, with all premiums for our employees paid for by DZYNE Technologies. DZYNE provides paid time off and paid holidays. Additionally, DZYNE offers a 401K plan with an employer match. DZYNE Technologies is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, national origin, disability, or protected veteran status. In addition to federal law requirements, DZYNE Technologies complies with applicable state and local laws governing nondiscrimination in employment in every location in which our company has facilities. This policy applies to all terms and conditions of employment. Pay Range: $90,000 - $130,000 per year

Milliken & Company is a global manufacturing leader whose focus on materials science delivers tomorrow's breakthroughs today. From industry-leading molecules to sustainable innovations, Milliken creates products that enhance people's lives and deliver solutions for its customers and communities. Drawing on thousands of patents and a portfolio with applications across the textile, flooring, chemical and healthcare businesses, the company harnesses a shared sense of integrity and excellence to positively impact the world for generations. Discover more about Milliken's curious minds and inspired solutions at Milliken.com and on Facebook, Instagram, LinkedIn and Twitter. Job Summary: The Weft Insertion Operator is responsible for efficiently operating and maintaining weft insertion machinery in the textile production process. This role requires attention to detail, technical skills, and adherence to safety and quality standards, to ensure the production of high-quality woven fabrics. The current open position will be on third shift with work hours 12am to 8am. Essential Duties and Responsibilities include the following. Other duties may be assigned. Must follow all Plant Safety and Work Rules; Work safely, attend required safety training. Responsible for good housekeeping in your work area as well as the Weft Department. Operate weft insertion machines to insert weft yarns into warp yarns during the weaving process. Keep broken yarn ends drawn in as necessary. Keep yarn in creel. Monitor machinery performance and make adjustments as necessary to maintain consistent fabric quality. Perform routine machine maintenance and cleaning to prevent breakdowns and ensure optimal operation. Troubleshoot and resolve mechanical issues in a timely manner. Frequently inspect fabric and machines to detect and prevent running defects and off quality fabric; adhere to the quality standards set forth by our customers. Collaborate with the production team to meet daily production targets. Maintain accurate production logs and report any deviations or malfunctions. Follow specific instructions from the dept. Lead/Manager and/or Supervisor. Assist the doffer, threader and / or technician in removing and replacing guide bars and other machine components as requested. Watch the machines / quality for other operators, while they are on break. Inform the Weft Technician or Dept. Supervisor/Mgr. of yarn or machine related problems. Perform any other duties as directed by Supervisor/Mgr. or department Lead. Supervisory Responsibilities This job has no supervisory responsibilities. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation's may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience One year certificate from college or technical school; or three to six months related experience and/or training; or equivalent combination of education and experience. Computer Skills To perform this job successfully, an individual should have knowledge of manufacturing software. Language Skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to stand and walk. The employee is frequently required to use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently exposed to moving mechanical parts, overhead cranes and material transporting vehicles; the noise level and job tasks in the work environment requires the use of PPE; the work area is usually loud and requires the continuous use of PPE to be worn in reducing hearing loss risk. , Milliken is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to actual or perceived race, color, creed, religion, sex or gender (including pregnancy, childbirth or related medical condition, including but not limited to lactation), sexual orientation, gender identity or gender expression (including transgender status), ancestry, national origin, citizenship, age physical or mental disability, genetic information, marital status, veteran or military status or any other characteristic protected by applicable law. To request a reasonable accommodation to complete a job application, pre-employment testing, a job interview, or to otherwise participate in the hiring process, please contact ******************************.

Since 1927, Davis Wire Corporation has built a reputation for dependability and quality. As the largest wire manufacturer in the western United States, our impressive range of products are used in a wide variety of fields, including agriculture, construction, transportation, communications and industrial applications. The foundations of our business are galvanized and reinforcement wire, though we also produce an assortment of specialty wires to fit almost any need. Our entire line is always supported by our committed customer service. Machine Operator Our manufacturing firm is seeking a Machine Operator- Wire Drawing. This position will provide the successful candidate with the chance to apply their knowledge, learn new skills, and work as a team within a fast-paced and safe environment. The ideal candidate for this role has a minimum of 6 months experience in the manufacturing sector, pays strong attention to detail, has excellent attendance and is committed to workplace safety. Broad Functions and Objectives: Use basic processes to set up, adjust, and operate assigned machines and auxiliary equipment to produce wire and wire products. Principal Accountabilities/Duties: Read, understand and follow production schedule. Interpret and follow basic written instructions, drawings, and documents Perform setups on assigned machine(s) Detect and report faulty processes and identify opportunities for improvement Maintains standard housekeeping standards Observes all safety rules including reporting of all industrial accidents and any unsafe conditions. Check with lead person at beginning of shift to determine the production schedule Set-up and maintain wire drawing machines according to production schedule and quality standards - making minor adjustments as necessary Load rod coils on to drawing machine payoffs. Operator and run machine to produce a finished product. Perform quality inspections on regular basis throughout shift. Perform other duties as requested. Must be able to work rotating shift schedule every 4 months. Must be able to work Saturdays and overtime as needed. Compensation $20.00 Hourly Rate $1,500 Retention Bonus after successful completion of 3 months and 6 months Incentive Pay Shift Differential for 2nd & 3rd Shift Pay for Knowledge Qualifications: Basic understanding of production and machine operation Ability to use tools and precision equipment Ability to perform physical work, including lifting up to 50 pounds, frequent use of arms and legs, and climbing. Must have excellent attendance and work record Must have machine experience. Must be able to work/communicate well in a team environment. Must be able to work 12-hour shifts Must be able to work in cold/hot temperature Must be able to do heavy lifting up to 50 lbs. or more Perks and Benefits: • Company contributes $980 monthly toward employee and dependent health and welfare • Medical, Dental, Vision • Incentivized bonus pay (up to $4/hour additional) • Paid Vacation • Paid Sick Leave • Paid Holidays (company pays 9 holidays per year) • Pension (company makes monthly contributions to employee retirement) • Life Insurance ($25,000 group term life insurance) This is a union position. New hires are required to pay a union initiation fee to the local union. Upon passing probation, new hires will join the union and will be required to pay monthly union dues Davis Wire is an equal opportunity employer. All aspects of employment will be based on merit, competence, performance and business needs. We do not discriminate on the basis of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status or any other status protected under federal, state or local law. Davis Wire Corporation does not accept unsolicited resumes from search firm recruiters. Fees will not be paid in the event candidate submitted by a recruiter without an agreement in place is hired; such resumes will be deemed the sole property of Davis Wire Corporation. Recruiters and agencies, please do not contact Davis Wire about this position.

94M RADAR Repair As a Radar Repairer, you'll maintain and repair essential on-the-ground surveillance radar equipment, one of the most sophisticated and decisive pieces of technology. You'll inspect, test, and adjust system components and equipment used to detect enemy artillery and mortar rounds for proper defense. Requirements U.S. Citizen 17 to 34 Years Old High School Diploma or GED Meet Tattoo Guidelines No Major Law Violations No Medical Concerns Testing & Certifications 36Nationally Recognized Certifications Available 10weeks of Basic Training 37weeks of Advanced Individual Training 107ASVAB Score: Electronics (EL) OR 102ASVAB Score: Electronics (EL) 90ASVAB Score: Skilled Technical (ST) Skills You'll Learn Radar & Computer Electronics Maintenance & Repairs Math & Physics

Full time opportunities available! $20-26hr DOE. Apply now!! Responsibilities * Operate and monitor AOI machines to inspect PCBAs and other electronic assemblies for defects. * Load and unload PCBAs onto the AOI machine according to established procedures. * Interpret AOI inspection results and identify defects such as missing components, incorrect placement, solder defects, and surface imperfections. * Document inspection results and maintain accurate records of defects found. * Perform basic maintenance and calibration of AOI equipment. * Follow established safety procedures and maintain a clean and organized work area. * Checking machinery to ensure they are operated in a safe manner * Communicate effectively with other team members, including production supervisors and quality control personnel. * Assist in troubleshooting and resolving production issues related to AOI inspection. * Adhere to all quality standards and specifications. * Potentially assist in the training of other AOI operators. * Alert supervisory and maintenance colleagues regarding necessary equipment repairs * Other various tasks as needed to support customer requirements and production schedule * Ensure assembled product meets compliance standards * Other various tasks as needed to support customer requirements and production schedule Required Skills and Qualifications * Strong attention to detail and ability to identify subtle defects. * Ability to read and interpret technical drawings, schematics, and assembly instructions. * Basic understanding of electronic components, functions, and surface mount technology (SMT) processes. * Proficiency in operating computers, navigating software, and performing basic math calculations. * Ability to follow written/verbal instructions, with strong problem-solving and troubleshooting skills. * Effective communication skills (written and verbal) and the ability to work independently or as part of a team; knowledge of quality control principles. Knowledge of quality control principles and practices. * Must be a U.S. Person per EAR Part 772 and ITAR 120.15 Desired Skills and Experience Responsibilities * Operate and monitor AOI machines to inspect PCBAs and other electronic assemblies for defects. * Load and unload PCBAs onto the AOI machine according to established procedures. * Interpret AOI inspection results and identify defects such as missing components, incorrect placement, solder defects, and surface imperfections. * Document inspection results and maintain accurate records of defects found. * Perform basic maintenance and calibration of AOI equipment. * Follow established safety procedures and maintain a clean and organized work area. * Checking machinery to ensure they are operated in a safe manner * Communicate effectively with other team members, including production supervisors and quality control personnel. * Assist in troubleshooting and resolving production issues related to AOI inspection. * Adhere to all quality standards and specifications. * Potentially assist in the training of other AOI operators. * Alert supervisory and maintenance colleagues regarding necessary equipment repairs * Other various tasks as needed to support customer requirements and production schedule * Ensure assembled product meets compliance standards * Other various tasks as needed to support customer requirements and production schedule Required Skills and Qualifications * Strong attention to detail and ability to identify subtle defects. * Ability to read and interpret technical drawings, schematics, and assembly instructions. * Basic understanding of electronic components, functions, and surface mount technology (SMT) processes. * Proficiency in operating computers, navigating software, and performing basic math calculations. * Ability to follow written/verbal instructions, with strong problem-solving and troubleshooting skills. * Effective communication skills (written and verbal) and the ability to work independently or as part of a team; knowledge of quality control principles. Knowledge of quality control principles and practices. * Must be a U.S. Person per EAR Part 772 and ITAR 120.15 All qualified applicants will receive consideration for employment without regard to race, color, national origin, age, ancestry, religion, sex, sexual orientation, gender identity, gender expression, marital status, disability, medical condition, genetic information, pregnancy, or military or veteran status. We consider all qualified applicants, including those with criminal histories, in a manner consistent with state and local laws, including the California Fair Chance Act, City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, and Los Angeles County Fair Chance Ordinance. For unincorporated Los Angeles county, to the extent our customers require a background check for certain positions, the Company faces a significant risk to its business operations and business reputation unless a review of criminal history is conducted for those specific job positions.

Dreaming big is in our DNA. It's who we are as a company. It's our culture. It's our heritage. And more than ever, it's our future. A future where we're always looking forward. Always serving up new ways to meet life's moments. A future where we keep dreaming bigger. We look for people with passion, talent, and curiosity, and provide them with the teammates, resources and opportunities to unleash their full potential. The power we create together - when we combine your strengths with ours - is unstoppable. Are you ready to join a team that dreams as big as you do? SALARY: $33.83/hr + 4.25 hours of daily OT SHIFT: 12 hours (rotating days/nights) every quarter COMPANY: Michelob ULTRA. Cutwater Spirits. Budweiser. Kona Brewing Co. Stella Artois. Bud Light. That's right, over 100 of America's most loved brands, to be exact. But there's so much more to us than our top-notch portfolio of beers, seltzers, and more. We are powered by a 19,000-strong team that shares our passion to create a future with more cheers. We look for people with talent, curiosity, and commitment and provide the teammates, resources and opportunities to unleash their full potential. The power we create together - when we combine your strengths with ours - is unstoppable. Are you ready to join a team that dreams as big as you do? ROLE SUMMARY: Sitting behind a desk all day was never your style. Rolling up your sleeves and solving tangible problems? That's more like it. If you are passionate about maintenance and troubleshooting while working in a fast paced environment, Anheuser-Busch could be your last stop in fulfilling your career. Our Maintenance Technicians are the key in guaranteeing that our quality is where it needs to be: the very best. If you are looking for a new challenge, come join our team today! As a Maintenance Technician, you will operate, maintain, troubleshoot, and repair high speed manufacturing equipment. You would also be responsible to perform quality checks by using powerful quality reporting systems. If you think you've got what it takes, we want to hear from you! JOB RESPONSIBILITIES: Operate, maintain troubleshoot and repair high speed manufacturing equipment Responsible for prioritization of operation and maintenance on multiple pieces of manufacturing equipment Perform quality checks and recording them in our automated quality control systems Interpret data to make quality and productivity decisions, we're a data driven company Perform routine and emergency maintenance on process equipment Maintain our work area in accordance with all sanitation and housekeeping standards, safety is our first priority JOB QUALIFICATIONS: High School Diploma or GED 1-3 years of industrial experience, preferably in a high-speed manufacturing or packaging environment Proficient in mechanical troubleshooting Able and willing to work a rotating 12-hour and other alternate work schedule, including day and night shift rotations, and required weekend and holiday hours Able and willing to work mandatory overtime as required Superior work history, including good attendance Knowledge of safety policies and procedures WHY ANHEUSER-BUSCH: At Anheuser-Busch, our purpose is to create a future with more cheers. For more than 165 years, we have delivered a legacy of brewing great-tasting, high-quality beers that have satisfied beer drinkers for generations. 99 percent of the products we sell in the U.S are made in the U.S. with more than $700 million in high-quality ingredients sourced from American farmers and more than $7 billion in goods and services purchased from U.S. suppliers, and we have invested nearly $2 billion in our 100 facilities across the country over the past five years. Through these investments, and as a leading American manufacturer and the nation's top brewer, we drive economic prosperity nationwide through investments in our people, facilities, and communities. We are the only brewer that invests in the U.S. at this scale. BENEFITS: Health benefits including Medical, Dental, Vision, Wellness and Tax-Advantaged Savings and Spending Accounts Life Insurance and Disability Income Protection 401(k) Retirement Savings options with a company matching contribution Chance to work in a fast-paced environment among a company of owners Free Beer!

Milliken & Company is a global manufacturing leader whose focus on materials science delivers tomorrow's breakthroughs today. From industry-leading molecules to sustainable innovations, Milliken creates products that enhance people's lives and deliver solutions for its customers and communities. Drawing on thousands of patents and a portfolio with applications across the textile, flooring, chemical and healthcare businesses, the company harnesses a shared sense of integrity and excellence to positively impact the world for generations. Discover more about Milliken's curious minds and inspired solutions at Milliken.com and on Facebook, Instagram and LinkedIn. Summary: Seeking a skilled and reliable Weaver to operate and maintain weaving looms in our textile manufacturing facility. The Weaver is responsible for producing high-quality woven fabrics by monitoring loom performance, inspecting fabric for defects, and making necessary adjustments to ensure production standards are met. Essential Duties and Responsibilities include the following: Work Safely, follow all plant safety rules and attend required safety training Patrol looms for efficiency. Patrol looms for first quality. Repair warp breaks. Repair filling breaks. Repair mechanical stops. Flag the loom for the cloth doffer when necessary. Flag a loom for a technician when necessary. Record smashes on smash board. Perform other duties assigned by supervisor. Data entry; enter information in computer, at COP box at loom. Check efficiency, stops, etc. in computer. Other duties as assigned. Milliken is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to actual or perceived race, color, creed, religion, sex or gender (including pregnancy, childbirth or related medical condition, including but not limited to lactation), sexual orientation, gender identity or gender expression (including transgender status), ancestry, national origin, citizenship, age physical or mental disability, genetic information, marital status, veteran or military status or any other characteristic protected by applicable law.