Production operator jobs in Yuma, AZ

Candidate position is for a technician in the client B3/B8 facility in Goleta, California, involved in the packaging of IR detectors for high reliability space, military and commercial applications. Responsibilities: A self-motivated, self-disciplined individual is the ideal candidate for this position. Ability to work with individuals and teams outside the department will be required. Tasks may include working with chemicals (epoxies, adhesives, solvents, etc.) and following rigorous disciplined methodologies and instructions. Tasks may require the ability to push a cart, extend arms above shoulder height, and be able to visually inspect small parts. Technicians will be expected to wear company provided Personal Protective Equipment (PPE) and strictly follow all safety related processes, procedures, and protocols. Requirements:Able to work from engineering instructions with exceptional attention to detail. Able to work extended periods in an environmentally controlled area. Able to use a microscope and small hand-held tools (tweezers, screwdrivers, etc.), often using both hands at the same time. Basic to moderate computer use. Desired Skill Sets: Previous experience working in a cleanroom and around ESD sensitive parts is a plus. Understanding of FOD and FOD reduction methods and concerns would be a big plus. Familiarity using Z-scopes is preferred. Experience in wire bond or laser welding is highly desired. Years of Experience Required (if any): Four Education: A high school diploma or GED Technicians are required to communicate in English and be able to understand written and verbal instruction in English.

R&D Partners is seeking to hire a Production Technician in Tarzana, CA. Your main responsibilities as a Production Technician: Using general application of principles, support activities to ensure GMP readiness for clinical manufacturing, including but not limited to equipment procurement, installation and qualification, facility qualification, and technology transfer. Perform operational tasks within a cleanroom environment in a manner consistent with safety policies, quality systems, and cGMP requirements. Assist in developing Standard Operating Procedures (SOPs) and other documents for manufacturing processes. Set up manufacturing areas and equipment, including complex automated cell processing equipment. Follow all cleaning and gowning procedures for the facility. What we are looking for in a Production Technician: Minimum of five (5) years of experience with a High School Diploma or a BS/BA in a relevant science or engineering discipline. Understanding of cGMP process and knowledge of CMC regulatory framework for biologics. Knowledge of aseptic techniques for primary human cell cultures and GMP manufacturing and supporting tech transfer and GMP clinical/commercial manufacturing operations. Knowledge of industry practices, cell therapy manufacturing experience preferred. Develop solutions to complex problems independently. Why Choose R&D Partners? As an employee, you have access to a comprehensive benefits package including: Medical insurance - PPO, HMO & Dental & Vision insurance 401k plan Employee Assistance Program Long-term disability Weekly payroll Expense reimbursement Online timecard approval Pay Scale: $38,421 - $48,027 Dependent on Experience) R&D Partners is a global functional service provider and strategic staffing resource specializing in scientific, clinical research & engineering. We provide job opportunities within major pharmaceutical, biopharmaceutical, biotechnology, and medical device companies. R&D Partners is an equal-opportunity employer. If you are interested in applying to this exciting opportunity, then please click 'Apply' or to speak to one of our specialists visit the 'Contact Us' page. R&D Partners is a leading life sciences recruiter focused on finding exceptional people and matching them with the finest positions across the globe. R&D Partners is acting as an Employment Agency in relation to this vacancy. By submitting this application, you confirm that you've read and understood our privacy policy, which informs you how we process and safeguard your data - ******************************************* Desired Skills and Experience Understanding of cGMP process and knowledge of CMC regulatory framework for biologics. Knowledge of aseptic techniques for primary human cell cultures and GMP manufacturing and supporting tech transfer and GMP clinical/commercial manufacturing operations. Knowledge of industry practices, cell therapy manufacturing experience preferred.

Robotics Operator Duration: 6 month contract + extensions Pay Range: $25-27/hr Must haves: Experience and interest in robotics engineering Hobby (gaming, robotics), pursuing in college, or full-time career Ability to stand 80% of the workday Good hand eye coordination and comfortability manipulating video game joysticks Detail oriented Day to day: Our client is seeking a highly motivated and detail-oriented Robot Operator to join our team. In this role, you will directly contribute to the advancement of robotic artificial intelligence by collaborating with industry leaders and supporting essential data collection efforts. A typical day to day will include being assigned to a workstation that is a small desktop of a robot with 2 arms. A list of tasks will be given to complete at that station through out that shift for the day. When you are not operating at the station you will be responsible for doing process improvement and documentation on your findings.

Akkodis is seeking a Production Associate for a client located in Novato, CA with this position being fully onsite. Pay Range: $23/hr - 27/hr (The rate may be negotiable based on experience, education, geographic location, and other factors.) Production Associate Job Summary: Job Description: Understanding of process theory and equipment operation. Ability to learn biopharmaceutical manufacturing processes including mammalian cell culture, depth filtration, tangential flow filtration, column chromatography, centrifugation, protein purification, and formulation of bulk drug substance. Support initiatives for process optimization. Identify and elevate processing issues and support solutions. Gain experience with automation systems (LIMS, MES, PI, etc.). Education -Bachelors degree in science related area or engineering -Associates degree in science related area or a Biotech certificate with 2+ years of experience in a biotech manufacturing environment or other regulated industry If you are interested in this Production Associate job in Novato, CA then please click APPLY NOW. For other opportunities available at Akkodis, go to **************** If you have questions about the position, please contact Agam Bharti at ****************************. Equal Opportunity Employer/Veterans/Disabled Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, an EAP program, commuter benefits, and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave, including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs that are direct hires to a client. To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit ****************************************** The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: · The California Fair Chance Act · Los Angeles City Fair Chance Ordinance · Los Angeles County Fair Chance Ordinance for Employers · San Francisco Fair Chance Ordinance

Department: Center for Marine Biotechnology and Biomedicine, Scripps Institution of Oceanography Supervisor: Dr. Deirdre Lyons APPLY HERE: **************************************************************************************************************** About the Role In the Lyons Lab, we study how diverse animal body plans are built at the cellular and molecular level and how those mechanisms evolve. We use molluscs and echinoderms as model organisms and are seeking a highly motivated candidate to join our interdisciplinary team. Learn more at ************************* Successful candidates will carry out work as a member of the newly formed Allen Discovery Center for Neurobiology in Changing Environments (ADC-NiCE). This pioneering, transdisciplinary center investigates the impacts of climate change on the neurobiology of marine organisms and how their nervous systems are affected by climate change-related stressors. The successful candidate will have the opportunity to apply their expertise to help unravel the complexities of marine neurobiology. The Lyons Lab is recruiting a detail-oriented Aquatic Transgenic Production Technician to support high-volume developmental biology and marine genomics workflows. The role involves hands-on care of marine invertebrates, embryo production, and microinjection pipelines that generate transgenic lines for studies on evolution, development, and environmental effects on neural systems. What You'll Do Aquatic Systems and Invertebrate Husbandry • Oversee daily operations of specialized Iwaki recirculating seawater systems • Maintain tanks, filtration units, plumbing, and life-support hardware • Feed and care for adult marine invertebrates • Monitor water chemistry and adjust pH, salinity, and nitrogen cycle parameters • Perform minor equipment repairs or construct simple system components Embryo Production and Microinjection • Collect embryos daily from breeding colonies • Perform high-volume embryo microinjections with precision • Rear embryos through metamorphosis and maintain stable genetic lines • Track development from embryos to juveniles and adults Molecular Reagent Preparation • Grow and purify bacterial cultures for plasmid production • Prepare plasmids, CRISPR components, and transposases • Complete routine molecular biology tasks, including buffer prep and PCR sample prep Lab Organization and Operations • Maintain detailed logs of animal lines, system maintenance, and breeding records • Manage ordering, shipping, and supply organization • Support lab upkeep, safety compliance, and waste management What You Bring Required • Experience with aquatic systems and water chemistry • Experience caring for adult aquatic organisms • Experience performing embryo microinjection in any species • Ability to lift up to 50 lbs and work regularly with seawater • Basic molecular biology skills • Strong observation, documentation, and organizational skills • Professional communication and teamwork abilities Preferred • Bachelor's degree in a biological science or equivalent experience • Familiarity with sequence-viewing or basic bioinformatics tools • Experience with IHC, HCR, or confocal microscopy Work Environment This role involves hands-on work with seawater systems, daily care of live marine organisms, and periods of standing, sitting, and moderate lifting. Because embryo production and animal care follow biological timelines, some work may occur outside regular hours, including evenings or weekends. Flexible scheduling is offered. Success in this role also depends on strong interpersonal and teamwork skills. You'll work closely with other lab members to coordinate animal care, share system responsibilities, and support high-volume husbandry and embryo workflows. The ideal candidate communicates clearly, collaborates well, stays flexible when priorities shift, and is comfortable receiving and applying constructive feedback. Annual Full Pay Range: $48,295 - $56,794 (will be prorated if the appointment percentage is less than 100%) APPLY HERE: ****************************************************************************************************************

Manual Machine Operator - Tucson, AZ Compensation: $20-$28/hour Employment Type: Full-Time (Regular Business Hours) Department: Machine Shop Reports To: Plant Manager, Production Department Who We Are At Industrial Tool, Die and Engineering, precision is our passion. With decades of experience behind us, we've built a reputation for delivering top-tier components to industries where details matter-like aerospace and advanced manufacturing. We combine old-school craftsmanship with modern innovation, and we're proud of the team that makes it all happen. If you're someone who takes pride in doing things right the first time, enjoys hands-on work, and thrives in a team that values quality and skill, then you'll fit right in here. The Opportunity We're looking for a talented Manual Machine Operator to join our production floor. You'll work with manual lathes, mills, grinders, and ProtoTrak systems to bring precision parts to life. From set-up to final inspection, you'll play a key role in delivering the quality our clients expect. What You'll Do Operate manual machines to produce precision components Set up jobs and verify dimensions using high-precision tools Read and interpret technical blueprints and work instructions Select and maintain proper tooling for each job Complete documentation accurately (job logs, SPC forms, etc.) Collaborate with the team to hit production targets and maintain quality What You Bring High school diploma required; trade school or apprenticeship preferred 5+ years of experience in a machine shop environment Strong blueprint reading and mechanical problem-solving skills Knowledge of machining speeds, feeds, and MIL-SPEC standards Ability to lift up to 50 lbs and work in a typical machine shop setting Proficiency in machine shop math and basic trigonometry Clear communication skills and a team-oriented mindset Why Join Us Competitive pay and full-time stability Work with a team that values skill, quality, and collaboration Be part of a company with a legacy-and a future Opportunities to grow your craft and contribute to something meaningful Ready to Apply? If this sounds like the kind of shop you'd be proud to work in, we'd love to hear from you. Send us your resume and tell us a bit about your experience. Let's build something great-together.

Contract to Hire Milpitas, CA $24/HR - $28/HR (Depending on Experience) Responsibilities: Responsible for a variety of complex operations and duties in a production area. Develops, maintains and improves most assembly processes Evaluates process specifications periodically to determine if they accurately reflect the process requirements and reviews process steps and reduces inefficiencies Works with the Quality Engineers on process improvement, monitoring tools, root causes and corrective actions Drives production schedules and process related problems to closure Supports engineering and the development labs with all new product introduction and development Assists in the compliance of safety regulations, i.e. ISO and business controls Provides production ready documentation (MPIs) with equipment setup and programs Leads team in making process and efficiency improvements Handles first calls in non-maintenance down issues and provides assistance to manufacturing support with implementing changes Monitors equipment performance and makes minor adjustments such as set-ups, calibrations and alignments Clears minor machine difficulties and performs maintenance and repairs under supervision of technician, engineer or supervisor Assists operators by answering questions and demonstrating operations Spot checks product to ensure quality levels are maintained Stays current working with manufacturing support on process and equipment changes and upgrades Must have knowledge and experience with all assembly requirements Requirements: High school diploma / GED a minimum; Higher education is a plus 4+ years of related manufacturing experience and the ability to use complex equipment, read difficult instructions and maintain written records. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Demonstrated knowledge of manufacturing line techniques. Requires the ability to use complex equipment, read difficult instructions and schematics, and maintain written records. Good communication skills both verbal and written Use of the following tools may be required: Electronic Assembly: color code, component, loading, touch-up, commercial soldering, mechanical assembly, surface mount assembly, point to point wiring; Cables: crimping, harness assembly, connector/wire soldering, cable prepping; Testing: cable & harness testing, trouble shooting, component testing, logic analyzer; Inspection: bare board, systems, components, cable/harness, microscope, measuring tools; Machine Operations: automatic component insertion equipment, surface mount insertion equipment, wave soldering; Mechanical & Electrical Tools: power air guns, taps & dies, alignment tools, measuring tools; Office Skills: typing, telephones, Warehouse: forklift, electronic scales, pallet jack, staple gun, cycle counting, kitting.

CLEANROOM PACKAGING OPERATOR Location: Palo Alto, CA Reports to: Operations Manager Shift: Days Compensation: $19 - $23/hr We've built our reputation as an industry leader by delivering world-class precision metal finishing solutions for over 50 years. We proudly serve a variety of industries including aerospace, defense, medical, semiconductor, and other high-tech industries that demand uncompromising quality and reliability. Our team is dedicated to craftsmanship, innovation, and exceeding customer expectations - every component, every time. Your Role: As a Cleanroom Packaging Operator, you'll be part of the final stage of production, preparing finished parts for shipment in a controlled environment. You'll handle wrapping, sealing, labeling, and boxing while maintaining the organization and cleanliness required for high-quality work. What You'll Do: Package finished metal parts in a cleanroom environment following established procedures. Wrap, seal, label, and box items with accuracy and efficiency. Maintain organization and cleanliness in the packaging area. Inspect parts for visible flaws or irregularities before packaging. Follow quality and safety standards at all times. Assist with other production tasks as needed. What You'll Bring: Basic packaging or manufacturing experience preferred. Strong attention to detail and ability to follow instructions. Self-motivated with a positive attitude and willingness to learn. Organized, reliable, and comfortable working in a fast-paced environment. Commitment to cleanliness and quality standards. Outstanding teamwork and communication. Must meet US person status due to export regulations.

Medical Device Manufacturing Operators Pay $25.00 - $30.00 6 month+ assignment Onsite in Campbell, CA EDUCATION/EXPERIENCE: • A minimum of 4 years related experience in the medical device industry; or equivalent combination of education and work experience. • Must be certified on all processes of work area, including certified as expert on all critical processes. • Training, skill, or experience from a trade is preferred. • Highly skilled in product manufacturing, testing, and data collection. • Proficient with GMP, GDP procedures and requirements as they relate to production lines. • Strong ability to be reliable, work independently or in team setting and take initiative. • Strong ability to coach and train others on manufacturing processes and procedures. • High skill on operating manufacturing equipment (i.e. hot boxes, adhesives, soldering, bonding, fuse joining). • Proficient with testing: tensile, simulated use testing, or tests related to assigned projects. • Expert hand dexterity and ability to work with small components. • Strong written and verbal communication skills. • Strong computer skills, including knowledge of Microsoft office products. • Strong interpersonal skills, effective interaction with Operations and other departments ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: • Operate with high skill, manufacturing and packaging equipment following Standard Operating Procedures (SOPs) and Good Manufacturing Practices (GMP). • Uses high level of expertise to work with in-house and contract manufacturers and ensure products are manufactured adhering to product plans, quality, and regulatory requirements. • Collaborate with manufacturing and engineering personnel to understand product requirements, identify and implement process improvements. • Perform complex troubleshooting and maintain workspace and equipment clean. • Adhere to strict safety regulations of the company; maintain a safe, clean and organized work area, and ensure that others are doing the same. • Perform manufacturing processes using Manufacturing Process Instructions (MPI's), while assisting in the development of new processes or test procedures through feedback. • Record and review accuracy of data on lot history records (LHR's) in collaboration with manufacturing, quality, and R&D. • Meet regular attendance and punctuality expectations and adhere to all company policies. • Learn and adhere to safety requirements of manufacturing processes, equipment, handling of chemicals and materials, and apply high skills during complex operations. • Accurately use computerized operating systems to run and monitor manufacturing equipment. • May oversee the set up and operation of a variety of equipment to produce materials and assemblies. • Monitor and record critical process parameters and ensure that proper documentation and GDP guidelines are followed by others. • Contribute to manufacturing team meetings to ensure communication between members. • Help build engineering prototypes and products used in preclinical/clinical evaluations. • Must be a Certified Trainer and teach/train others on manufacturing processes. • Actively promote and support the Quality Management System, Quality Objectives, and Quality Policy. • Assure that you and functional subordinates (if applicable) are trained on all applicable procedures and processes according to Good Manufacturing Practices, applicable FDA, and Regulatory requirements. Benefits (employee contribution): Health insurance Health savings account Dental insurance Vision insurance Flexible spending accounts Life insurance Retirement plan All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Red Oak Technologies is a leading provider of comprehensive resourcing solutions across a variety of industries and sectors including IT, Marketing, Finance, Business Operations, Manufacturing and Engineering. Our client is an electronics manufacturer. They are looking for a Manufacturing Technician (Swing Shift) to join their team. This role is a CONTRACT position. Position will be ONSITE. Candidate must be able to commute onsite to San Francisco, CA. **Swing Shift - 2:00PM - 10:30PM - Monday through Friday - Some work on Saturday as needed** **Gated private parking lot available for contractors** **$30/hr - $35/hr** Position Requirements: Follow all Safety and Laser Safety procedures and requirements Be able to construct, test and calibrate engineering and production robotic and computer-controlled assembly systems using engineering prints, schematics, assembly instructions and engineering direction Knowledgeable in high precision measuring equipment, calibration, and detailed record generation Experienced and Proficient in the following: Mechanical hand and power tools Oscilloscopes, DMM, Signal Generators, Optics, Cameras Laser safety, lasers, laser pattern recognition, beam focus, and active alignment Auto dispense and cure of UV adhesive Multiple axis, vision assisted, computer controlled robotic assembly equipment in both a R/D and Volume Manufacturing environment Identification of “Root” Cause of Manufacturing, Quality and Yield issues Microsoft Office, Standard SPC and Flowcharts packages Pneumatic actuated Slides, Grippers, etc. Hex Pod Tables, Active Alignment Excellent reading, writing, and communication skills in English Minimum of 5 years industry experience, Lidar Sensor experience preferred but not required Be able to stand for long periods of time Lift and carry 35 lbs Red Oak Technologies is made up of people from a wide variety of backgrounds and lifestyles. We embrace diversity and invite applications from people of all walks of life. See what it's like to be at the top; connect with one of our recruiters and apply today. Red Oak Tech: Quality | Talent | Integrity Note: Compensation rates are based on years of experience and/or level of skills relevant to the opportunity.

Title: Manufacturing Specialist Pay: $25.00-$31.00/hour Duration: 6-Month Contract Schedule: 1st Shift (8-hour days; flexible start between 6:00 AM - 8:00 AM) Job Description Position Summary: This role provides technical and process support to the manufacturing team to ensure production goals are met while maintaining quality, efficiency, and compliance with established quality systems. Key Responsibilities Analyze production data to identify trends and recommend actions that improve efficiency, product quality, and cost. Identify process gaps and collaborate with engineering teams to drive improvements. Support validation activities as a subject matter expert, including reviewing validation plans, executing protocols, and ensuring validated state is maintained. Serve as an SME for MES and eDHR systems; collaborate with cross-functional teams during development and change management. Create, update, and support Quality Documents such as SOPs, work instructions, pFMEAs, test methods, batch record templates, and validation reports. Participate in continuous improvement initiatives using Lean and Operational Excellence methodologies. Contribute to internal audit activities and assist with corrective actions and audit responses. Test next-generation instrumentation using approved procedures. Troubleshoot product non-conformances and work closely with Manufacturing, Quality, and Life Cycle Management to resolve issues. Maintain reports tracking instrument failures and defects. Perform other duties as assigned. Required Education High School Diploma or GED. Some college-level STEM coursework or related technical training preferred. Preferred Background & Skills Bachelor's degree in Engineering, Chemistry, Biology, Physics, or related field preferred. No prior technical experience required; detailed instructions will be provided. Strong organizational skills and attention to detail. Ability to work both independently and collaboratively in a team environment. Strong communication and troubleshooting skills. Proficient with Microsoft Office (Excel, Word, PowerPoint). Experience with SOPs, DHRs, ECOs, GLP, GMP, and SAP is a plus. Hands-on experience with diagnostic or sequencing instrumentation is highly desirable.

This position works to provide superior customer service; receives, analyzes and processes day-to-day business transactions efficiently while meeting the expectations of customers and departmental KPIs. Follows internal operating procedures, business processes and policies. Essential Duties and Responsibilities Performs a combination of duties in accordance with departmental guidelines: Provides superior customer service through various channels, i.e. voice, email, chat, etc., by interacting with internal and external customers in a professional, courteous and ethical manner Processes, resolves, and documents routine customer transactions through completion; Researches, analyzes, provides complete and accurate information and solutions Tracks work progress as needed Complies with established operations policies, guidelines, procedures and practices Meets individual and team targets for phone and performance metrics Education High School Diploma or equivalent Experience One to two years of related customer service experience. Experience in inbound call transactional work desired. Experience within a dealership or related to the vehicle service contract industry preferred. Skills, Knowledge and Abilities Working knowledge of concepts practices, procedures and principles related to the industry a plus Possess a strong customer orientation and the ability to build relationships of trust and mutual respect with internal and external customers and team members Possess analytical skills to grasp simple to mildly complex situations with changing circumstances for well-reasoned solutions that balance risk Customer service techniques A strong work ethic and time management skills in order to handle activity load and meet KPI's Proficient computer navigation skills using a variety of software including Microsoft Office Suite All qualified applicants will receive consideration for employment without regard to race, color, national origin, age, ancestry, religion, sex, sexual orientation, gender identity, gender expression, marital status, disability, medical condition, genetic information, pregnancy, or military or veteran status. We consider all qualified applicants, including those with criminal histories, in a manner consistent with state and local laws, including the California Fair Chance Act, City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, and Los Angeles County Fair Chance Ordinance. For unincorporated Los Angeles county, to the extent our customers require a background check for certain positions, the Company faces a significant risk to its business operations and business reputation unless a review of criminal history is conducted for those specific job positions.

Manufacturing Technician - Fremont, CA (On‑Site) Pay: $47.00/hour. Schedule: Full-time, Monday-Friday, 8:00 AM-4:30 PM Work Environment: In-person. Some travel to Hayward as needed An on-demand autonomous ride‑hailing company is seeking a Manufacturing Technician to support the assembly and testing of next‑generation autonomous vehicles. This team is transitioning from R&D to commercial launch, and your hands-on expertise will directly influence build quality, system reliability, and production readiness. You'll work on vehicle assembly lines, support sub‑assemblies, run software bring‑up scripts, perform light diagnostics, and collaborate closely with engineering teams. Your feedback will help refine processes, improve safety, and accelerate the company's path to mass production. What You'll Do Work closely with leads and technicians on vehicle assembly line builds Perform sub‑assembly of smaller components to support production Support bring‑up activities, including running scripts and assisting with software testing Conduct light diagnosis and troubleshooting of vehicle issues Execute daily tasks to ensure on‑time project completion Provide feedback to engineering and development teams Collaborate with cross‑functional teams as needed Follow all Environmental Health and Safety (EHS) guidelines Identify opportunities to improve quality, efficiency, and safety Ideal Candidate Profile The strongest candidates bring hands‑on mechanical skills, a positive attitude, and the ability to stay productive even during downtime. Positive attitude, quick learner, strong team player Comfortable with cutting, drilling, teardown, and rebuild work on Toyota Highlanders Experience with sub‑assembly to feed the production line Able to run basic software scripts (copy/paste, execute) Bachelor's degree + 4-6 years experience preferred; 2-4 years considered with strong soft skills Electrical work is minimal (10-15%) and can be learned CAN/LIN familiarity is a plus Automotive line experience translates well Semiconductor line experience is not a fit Required Skills & Qualifications Bachelor's degree with 4-6 years of technician or manufacturing experience, or equivalent industry experience Proficiency with basic hand and power tools Strong analytical and problem‑solving skills Understanding of basic electrical theory Ability to read electrical schematics and harness drawings Familiarity with CAN/LIN systems is a plus Automotive/OEM experience preferred Associate Degree or Certificate in Automotive Technology is a plus Why This Role Matters As a Manufacturing Technician, you'll help build and test autonomous vehicles equipped with Gen2 technology. Your work will directly influence: Build quality System reliability Safety improvements Speed to commercial launch Your hands-on insights will help refine key systems and accelerate the company's transition from prototype to production.

Johnson Service Group is looking for an SMT Operator for one of our Client in the Bay Area. This person will operate an SMT machine in a contract manufacturing environment. Responsibilities Login and Read Manufacturing Process Instructions. (MPI) Setup and operation of surface mount pick and place machines. Setup and operation of automatic and semi-automatic stencil printers. Setup and operation of automatic labeling machine. Setup and operation of mass reflow ovens. Perform manual component placement and inspection. Perform routine machine daily maintenance. Perform detailed quality inspection of populated circuit boards. Follow Traceability process per instructions. Any other duties assigned. Qualifications: High School Diploma or Equivalent Can build a strong bond with employees to create an open and honest communications Strong, effective organizational skills required; detail oriented; ability to multitask in a changing and/or fast paced environment Able to manage change in an organization Able to create and maintain the highest levels of confidentiality when dealing with proprietary information and sensitive situations Rate $22-24/hr Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law.

TITLE: PLATING PROCESS TECHNICIAN FLSA STATUS: NON-EXEMPT A SHIFT: MONDAY THRU WEDNESDAY AND EVERY OTHER THURSDAY 6:00 AM TO 6:00 PM REPORTS TO: DIRECTOR, PLATING PROCESS ENGINEERING Under the direction of the Director of Plating Process Engineering, the Plating Process Technician provides support to the engineering teams in the plating area, including assisting with wet etch process, preparing and maintaining recipes, reviewing and documenting process or procedures, and expediting and dispositioning prototype wafers; maintains process controls using Statistical Process Control (SPC), collects and analyzes data, and recommends corrective action. This position is located in Milpitas, California. ESSENTIAL FUNCTIONS: Provides support to the engineering teams in the plating, wet etch, and stripping process areas Supports the plating, wet etch, and stripping processes by preparing, maintaining, and setting up recipes to ensure an efficient and consistent process Reviews and documents processes and procedures; partners with engineering to implement changes effectively Expedites and dispositions prototype wafers in the plating, wet etch and stripping areas Assists engineers to run plating process development experiments, collects and analyzes data, and recommends corrective action if required Reviews and maintains process controls using SPC and prepares charts and graphs Assists with routine trouble-shooting and resolves basic process-related issues Participates in and recommends modifications to procedures or processes in support of continuous improvement initiatives Collaborates with Engineering to qualify or approve new processes or procedures Creates reports, charts, or graphs on an ad-hoc or routine basis Prepares daily pass down report for engineers, next shift plating process technicians, and manufacturing plating technicians Responds to inquiries from other team members, managers, or departments Adheres to all safety policies and procedures as required Performs other duties of a similar nature or level* MINIMUM QUALIFICATIONS: Associates degree in Electronics or Industrial Technology and/or equivalent relevant experience Two years of experience working in the semiconductor industry Knowledge of plating, wet processes and procedures Hands on experience using metrology tools such as pH meter, Tencor Thickness Profiler, XRF, and B-H loop tools Proficient in the use of Microsoft Office Applications Required Knowledge, Skills, and Abilities: Knowledge of semiconductor or hard disk drive (HDD) principles and processes Knowledge and ability to use SPC to maintain process controls Knowledge of plating, wet processes and procedures Ability to collect and analyze data, present findings, and recommend corrective action Ability to adhere to all safety policies and procedures Ability to communicate effectively with all levels of employees and management Demonstrated ability to follow routine verbal or written instructions Demonstrated problem solving and organizational skills Demonstrated time management and prioritization skills Skilled at resolving issues quickly and efficiently Flexible and able to prioritize The hourly rate for this full-time position is between $25.00-$40.00 + bonus target + benefits. Within the range the individual pay may differ depending on additional factors including job responsibilities, job related knowledge, skills, abilities, education, and experience. The hourly pay range shown is subject to change and may be modified periodically. WORKING CONDITIONS: The Plating Process Technician works primarily in an indoor environment on A shift which is Monday thru Wednesday and every other Thursday 6:00 AM to 6:00 PM. The schedule may be altered from time-to-time to meet business or operational needs; may travel from building-to-building as needed. Works in a class 100 ESD sensitive wafer manufacturing facility; wears a cleanroom (bunny) suit, including hood, gloves, safety glasses, booties, and mask. May be exposed to hazardous conditions, chemicals, fumes, and/or gases during the course of work day; Stands and walks; performs various fine grasping movements, bends, and twists; operates a computer and enters information using a keyboard, operates a telephone, and other office equipment. Must be able to load and unload various wet etch chemical solutions several times per shift. May be required to push, pull, or lift up to 25 pounds. *Other duties of a similar nature or level are duties that may be required, but may not be specifically listed in the job description or posting. TDK/Headway Technologies, Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, national origin, age, disability, or genetics. Applicants requiring accommodation in order to complete the application process should contact the Headway Human Resources Department.

The Production Supervisor will oversee daily operations in the pharmaceutical manufacturing area, ensuring compliance with cGMP standards, FDA regulations, and internal SOPs. This role is responsible for supervising production staff, maintaining quality standards, and driving efficiency across formulation, filling, inspection, labeling, and facility sanitization processes. Key Responsibilities Supervise and develop employees in production areas (warehousing, formulation, aseptic filling, inspection/labeling, sanitization). Ensure adherence to Good Manufacturing Practices (GMP) and all regulatory requirements. Monitor production schedules and adjust workflows to meet deadlines. Analyze production errors, downtime, and waste; lead continuous improvement initiatives. Collaborate with Quality Assurance to resolve variances and document errors promptly. Maintain accurate production records, including batch documentation and training logs. Implement and update Standard Operating Procedures (SOPs) for production operations. Conduct regular equipment inspections and coordinate maintenance. Manage staffing levels, time and attendance, and departmental budgets. Lead problem-solving activities and corrective/preventive actions (CAPA). Qualifications Education: Bachelor's degree in a technical or scientific discipline preferred. Experience: 2+ years in aseptic processing or pharmaceutical manufacturing. 1+ years supervisory experience in a cGMP FDA-regulated environment. Strong knowledge of cGMP guidelines and pharmaceutical production processes. Excellent communication and leadership skills. Proficiency in Microsoft Office and production management systems. Ability to work in a fast-paced environment and adapt to change.

Job Title: Production Supervisor Reports To: Head of Operations - Carson facility Department: Production Employment Type: Full-Time / Exempt About Us Woojin IS America, Inc. (WISA), headquartered in Santa Fe Springs, CA, is a fast-growing manufacturer specializing in electric equipment for rolling stock and light rail vehicles. We proudly serve North American customers with advanced technologies that deliver safe, reliable, and long-lasting transportation equipment. About the Role The Production Supervisor is responsible for overseeing day-to-day rolling stock and light rail manufacturing operations, ensuring safety, quality, productivity, and employee engagement within assigned production areas. This position plays a critical role in meeting customer commitments, optimizing resources, and driving continuous improvement across processes and teams. Key Responsibilities Production Supervision Plan and direct daily production activities for railcar refurbishment, overhaul, and modification projects, schedules, staffing and priorities to meet delivery and quality targets. Monitor progress against established goals, identifying variances and developing recovery plans for schedule, cost, and quality performance. Ensure efficient use of manpower, machines, and equipment while maintaining a high standard of product quality. Coordinate production activities with cross-functional teams such as Engineering, Quality, Purchasing, and Warehouse. Safety and Compliance Enforce all safety protocols and ensure employees are properly trained and certified. Conduct regular safety audits, maintain a clean and organized work environment, and drive compliance with 5S principles. Promote a culture of zero incidents through proactive hazard identification and corrective actions. People Leadership Supervise, coach, and develop production staff to achieve individual and team performance goals. Conduct regular performance evaluations in coordination with HR, providing constructive feedback and development plans. Foster a positive, motivated, and collaborative work environment that supports employee engagement and retention. Continuous Improvement Partner with Methods, Engineering, and Quality teams to enhance process efficiency, work cell optimization, and overall throughput. Lead daily production meetings to review safety, quality, material availability, and improvement opportunities. Implement continuous improvement initiatives to increase productivity, reduce waste, and strengthen quality. Reporting and Analysis Track and report key performance indicators (KPIs), including productivity, efficiency, and labor utilization. Review and approve employee time reports to ensure accurate project and cost tracking. Support long-term production planning and capacity forecasting. Qualifications High school diploma required; Associate or Bachelor's degree in Manufacturing, Industrial Engineering, or Business preferred. 3-5 years of supervisory experience in rail manufacturing or production environment. Strong leadership, communication, and interpersonal skills with the ability to motivate and manage diverse teams. Excellent problem-solving and analytical abilities in a fast-paced environment. Working knowledge of production processes, quality standards, and ERP or manufacturing software systems. Commitment to safety, quality, and continuous improvement. Ability to manage multiple priorities and adapt to changing production needs. Performance Expectations Ensure all safety, quality, and productivity targets are met or exceeded. Maintain an organized and efficient work area in compliance with company standards. Demonstrate visible leadership presence on the production floor. Support a culture of accountability, teamwork, and operational excellence. What We Offer Competitive compensation package commensurate with experience. Comprehensive health, dental, and vision insurance. Paid time off, holidays and retirement plan. Opportunity to work in a growing, innovative rail manufacturing company. Collaborative, team-oriented environment focused on safety, quality, and continuous improvement.

1. Monitor production lines for maintenance, sanitation and product needs and/or deviations making adjustments as necessary. 2. Possess knowledge of ingredients and functionality. 3. Set, adjust and maintain correct equipment settings. 4. Manage employee shifts to ensure all duties are being performed. 5. Responsible for GMP practices that are required by a wholesale, commercial bakery and are in compliance with company and customer standards. 6. Ensure a safe working environment by monitoring safety standards while in production. 7. Meet or exceed customer quality requirements. **What You Need for this Position** Required: - High School Diploma or GED - Minimum of at least 3 years experience in a similar role in the baking industry. Preferred certification of completion of an appropriate AIB In-Residence or Distance Learning course. Ability to do basic math and computational skills as well as possess verbal and written skills. - English is required but ability is speak Spanish is a plus. So, if you are a Bakery Production Supervisor with experience, please send in your resume. Applicants must be authorized to work in the U.S. Compensation based upon experience and skills.

The Production Supervisor oversees daily operations within a designated production area to ensure that manufacturing goals related to volume, cost, quality, and safety are consistently met. This role involves coordinating staff, optimizing workflows, troubleshooting issues, and driving continuous improvement initiatives. SCOPE OF WORK PERFORMED Ensure Machine Set-up meets production and quality goals Determine actual machines and locations where work is to be assigned Assuring a steady flow and process of work Interface with Quality, Engineering, Payroll, Human Resources and Management Daily assignment of duties for entire department Training and Supervision of all operators in the correct and safe use of equipment Training new employees in inspection procedures and/or work instructions Ensure Production leads are adhering to their responsibilities as outline in the Production lead Job Description Ensure employees are performing their duties to the standards and guidelines Reinforce compliance with Health & Safety regulations, Company rules, policies and procedures Ensure employees work in a manner and with the protective devices, measures and procedure required by the Occupational Health & Safety Act and the regulations. Ensure employees use or wear equipment, protective devices or clothing as required by the company Ensure employees are trained and follow prints, work/inspection procedures and/or work instructions Ensure employees are upholding quality standards and perform inspection prior to completion of paperwork and/or labor entry Ensure all paperwork and/or data entry is completed accurately and on time Ensure all machines are operating at maximum efficiency and utilization Organize the employees to ensure maximum efficiency from the work center Ensure that material is delivered to the designated area prior to shift start Report any damage to machines or tooling to supervisors and/or maintenance immediately Ensure that all schedules and deadline are met by the employees Ensure finished product is delivered to the next operation and/or drop-off zone Continuously look for ways to improve production, quality and safe working conditions in the plant Ensure employees maintain proper housekeeping standard. Ensure communication flow from company to employees and vice versa Assess employee's ability to perform certain jobs, which can lead to further training or reassignment of job Provide employees and Lead Hands with coaching and counseling as required Execute progressive discipline when deemed necessary Support Management decisions and employ diplomacy when directing employees Maximize and maintain plant through-put using NBS tools Comply with EHS Standard policies and procedures. Manage all KPI'S for Production All other duties as assigned by the Plant Manager GENERAL QUALIFICATION GUIDELINES 5-7 years previous supervisory experience Ability to read and interpret dimensional and weld prints Ability to train, motivate, coach and counsel others Must have excellent interpersonal skills, ability to interact with employees, and all levels of management Must possess problem solving, conflict resolution and decision-making skills Excellent written/oral communication and excellent listening skills Works well independently and in a team environment Strong organizational skills, able to prioritize, time management Must possess the ability to provide and receive positive criticism Must have the ability to take ownership and be accountable for the department Ability to multi-task, excellent time management skills and detailed orientated Must be creative and possess the ability to think outside the box Ensure confidentiality of all employee information Physical Demands & Work Conditions Working in a plant environment Frequent distractions and interruptions Multiple demands, challenging, fast paced, team orientated environment, can be noisy Constant standing, walking, bending and lifting and climbing Warm/Cold temperatures Constant communication with employees, peers, management and customers involving time management, multi-tasking, scheduling, decision making, forecasting and problem solving Intense work atmosphere Use of computer and phone Overtime as required Involve exposure to noise, heat, and machinery.