Production team member jobs in Los Angeles, CA

Huntsman is seeking a Production Operator supporting the Advanced Materials Division located in Los Angeles, CA. This position will report to the Production Supervisor. Job Scope Huntsman is currently recruiting for a Production Operator at our chemical manufacturing site in Los Angeles, CA. In this role, you will operate plant equipment and chemical processes safely and efficiently to achieve production output goals. You will gain in-depth knowledge of the production process and its supporting operations and apply that knowledge to maintain efficient and safe production activities. In summary, as the Production Operator, you will: Operate and monitor chemical processing equipment such as vessels, mixers, reactors, and dischargers for the manufacture of epoxy and polyurethane formulations. Safely handle chemicals, adhering to all safety procedures, PPE requirements, and written/verbal instructions in English. Perform processes that include heating, cooling, vacuum, pressure, nitrogen purging, and exothermic reactions. Fill containers, clean equipment and tools, and perform general housekeeping to maintain a safe and organized environment. Operate a forklift and handle drums as part of daily activities. Work independently and collaboratively with other team members to meet production goals. Participate in company-required training and support Environmental, Health, and Safety initiatives. Support continuous improvement initiatives and contribute to Huntsman's operational excellence goals. Qualifications You must possess the following minimum qualifications to be initially considered for this position. Preferred qualifications are in addition to the minimum requirements and are considered a plus factor in identifying top candidates. The candidate must have an unrestricted right to work for Huntsman in the United States. Minimum Qualifications High School diploma or equivalent (GED) required. Minimum of 3+ years of related experience in a manufacturing facility, preferably within a chemical formulation plant. Must be cleared by state and federal authorities to work with controlled chemicals utilized at the site. Willingness and ability to work any of the three shifts (1st, 2nd, or 3rd) based on business needs. Skills and Knowledge Strong adherence to safety procedures and attention to detail. Excellent communication skills with the ability to follow precise written and verbal instructions. Demonstrated ability to work effectively both independently and as part of a team. Good problem-solving, time management, and organizational skills. Basic knowledge of mathematics, science, and engineering principles. Computer literacy and ability to interface with production reporting systems. Preferred Qualifications Experience in epoxy or polyurethane manufacturing. Prior forklift certification. Exposure to aerospace, electronics, or tooling industry production environments. Working Environment This role involves working in a chemical manufacturing plant, which requires the use of personal protective equipment (PPE) at all times. The position includes standing, walking, lifting drums, and operating forklifts. Shift work is required, and good housekeeping is essential to ensure a safe and efficient operation. Compensation: Starting rate for Production Operator is $35.00/hr. plus $2.00/hr. shift differential for hours worked from 2:00pm-6:00am. The compensation range reflects the Company's reasonable expectation at the time of posting. We consider a number of business-related factors when making individual compensation decisions including, but not limited to, education, experience and training. Step progression available based on qualification - minimum of 12 months prior to associate qualifying. Huntsman offers outstanding benefits which start from Day One. Competitive healthcare, dental, and vision. One additional week of paid time off - on top of vacation. 401k - Huntsman automatically contributes 6% of eligible pay, regardless of employee contribution. In addition to the 6% non-discretionary contribution, Huntsman will match $1 for every $1 you contribute up to a maximum match of 4% of eligible pay. Huntsman is proud to promote equal opportunity in the workplace All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, national origin, disability, age, or any other protected characteristic. All unsolicited resumes presented by recruitment agencies are treated as pro bono information or service and will not be compensated. Huntsman is aware of scams involving fraudulent job offers. We do not make job offers until after a candidate has submitted a job application and has participated in an interview. Please be advised that any job offer that requires payment or requires you to deposit a check is likely a scam. If you have questions about any open positions at Huntsman or Rubison, please visit our Careers website at ******************************************** Additional Locations:

Job Description Job Title: Lead Production Associate Reports to: Kitchen Production Manager Company: JustFoodForDogs, LLC Job Type: Full-time, Non-Exempt At JustFoodForDogs, we're dedicated to helping pets live longer, healthier lives through the power of fresh, whole food. We're looking for passionate and driven Lead Production Associates to help bring that mission to life in our open-to-the-public kitchens. Our ideal Lead Production Associate is a hands-on leader who thrives in a fast-paced environment and sets the standard for food safety, quality, and efficiency. You'll guide and support our kitchen team including cooks, mixers, packagers, and rovers, while ensuring every batch is prepared with care and precision. Strong organization, time-management, and leadership skills are a must, along with a genuine love for pets and real food. If you're ready to lead with heart and help us feed more dogs and cats the food they deserve, apply today and join the pack! Key Responsibilities Effectively manage workflow to achieve goals in a timely manner Work with General Manager and Assistant General Manager to develop staff schedules Leads by exemplifying team management, setting and meeting goals, and problem solving Ensure proper food preparation and maintain critical control points, including monitoring and correcting food temperatures as needed Works shifts in the cooking and packaging departments to execute daily production Cooks: Responsible for preparing and cooking human grade pet food in small batches to ensure the highest safety and quality Mixers: Complete recipes by adding oils, nutrients, and operating mixer to ensure evenly distributed ingredients; weigh and transfer finished product for packaging Packagers: Ensure packages are accurately labeled, weighed and sealed; operate and maintain sealers to highest standards; fulfill requested quantities and transfer to freezer Rovers: Prepare production and transfer documents, labels, move finished products to process supply deliveries Assists with clean-up during and at end of shift Comply with sanitation regulations and safety standards Maintain a positive and professional approach with coworkers and customers Competencies and Qualifications Team leadership experience and skills Kitchen experience Ability to multitask Attention to detail; ability to conduct repetitive tasks with quality General understanding of basic kitchen functions, various cooking methods, ingredients, equipment and procedures Accuracy and speed in executing assigned tasks Organizational skills ServSafe certification preferred Tenets of the Pack (Company Values) Live Our Mission - We believe this is more than a job. It's a cause. Be a Team Player - We put company goals and success first. Maintain a Positive Attitude - We bring energy, enthusiasm, and drive to everything we do. Deliver Results - We play to win. JUSTFOODFORDOGS is an Equal Opportunity Employer. JUSTFOODFORDOGS does not discriminate due to race, color, creed, religion, sex, sexual orientation, gender and/or gender identity or expression, marital or parental status, national origin, ethnicity, citizenship status, veteran or military status, age, disability, unemployment status or any other legally protected basis, and to the extent permitted by law.

Energy: Forget about blending in. That's not our style. We're the risk takers, the trailblazers, the game-changers. We're not perfect and we don't pretend to be. We're raw, unfiltered, and a bit unconventional. Our drive is just like our athletes, unrivaled. The power is in your hands to define what success looks like and where you want to take your career. It's not just about what we do, but about who we become on along the way. We are much more than a brand here. We are a way of life, a mindset. Join us. A Day in the Life: As a Machine Operator at Monster Energy, you'll be at the heart of our production process, responsible for operating and maintaining equipment to ensure that production tasks are completed efficiently and accurately. Your efforts will ensure that production tasks are carried out with precision and efficiency, upholding the exceptional quality and standards that define Monster Energy's products. The Impact You'll Make: Operate and monitor line, removing or shifting materials and/or finished product as necessary to facilitate proper flow and machine operation. Ensure package and product quality. Operate all manufacturing equipment efficiently and safely. Performs all running maintenance, housekeeping and organizing. Execute light duty troubleshooting. Maintain clean work area throughout good housekeeping practices. Clean equipment during and after shift. Perform CIP/Sanitation as required. Expedite repairs to line, working with maintenance as necessary. Act as a member of team to deliver results and react to issues appropriate for situation Monitor, measure and report system performance. Conducts all quality control requirements. Perform product and package changeovers. Maintain accurate and current records of down time and machine operations Communicate with manager, mechanics, and other operators to solve problems, take direction and assigned work. Utilizes computer- based workstation systems. Who You Are: Prefer a Bachelor's Degree in the field of -- Heavy Machinery, Operations or related field of study Additional Experience Desired: Between 1-3 years of experience in a machine operator role Additional Experience Desired: Between 1-3 years of experience in manufacturing environment Computer Skills Desired: Microsoft office Additional Knowledge or Skills to be Successful in this role: Knowledgeable about the limits and capabilities of different machines is essential for optimal performance. Monster Energy provides a competitive total Compensation. This Position has a range of $24-$30/ hourly. The actual pay may vary depending on your skills, qualifications, experience, and work location.

Who WE Are: FASTSIGNS of Orange is a family owned, independently operated franchisee of FASTSIGNS. We are a new center rising from the chaos of the pandemic and just started this summer to be the graphics and signage partner of choice for our community! We consult, design, produce, source, and install visual communication assets for our customers. i.e. we don't just make signs! As a family owned center, we are committed to building an enduring business through providing long term careers for our staff to build their skills and professional careers, being the partner and advisor of choice to businesses we serve for all their visual communication needs, and creating a profitable business from which we can give back to our community. And have fun and make some money along the way of course! :) Job Title: Commercial Sign Production/Installation Team member Key Responsibilities: * Produce, or assist the Production Lead to make, finished products for our customers * Assist with installation as needed * Work with the sales and installation team members to ensure customer satisfaction with the finished products * Work with the sales team to translate estimates and orders in the order system to create proofs and layouts * Design customer orders with the focus on the final product to factor in how it will be produced in center or through our vendors * Scheduling the daily workflow of graphics design, printing, production, and installation This position is for you if: * You have a Great ATTITUDE: enjoy learning, work best in a team, and have a strong sense of personal accountability to create results for yourself and your team * Enjoy problem solving to meet customer's needs, and go the extra step to help them create a vision of what the solution could look like * Detail oriented and organized to ensure a smooth and efficient workflow with the team and for our customers (You will be doing some light project management each day to coordinate with the sales and install team members on where each order is in the workflow and help to prioritize the work) * Have at least 2 years experience in both commercial sign production (physically operating large format vinyl printers and plotters) and sign installation * Fluent with Adobe Illustrator and Photoshop (That is the main graphics software we use) * Fluent with Google's G-Suite (We use that heavily as part of our working environment) * Able to lift and carry up to 50lbs (You may need to help our with the delivery of graphics to the customer site, or else help customers load products into their vehicles from our center) * Can climb ladders (You may have to occasionally assist on complex installs with the Production Lead) Other "nice" to haves that will put you on the top of our list: * Worked at other FASTSIGNS centers, or other similar competitors in the industry * Extensive graphics installation experience - dimensional, monument, electrical, car wraps, etc * Extensive experience with large format printing and/or graphics/signage production - managing the printing process as well as mounting onto substrates This position is NOT for you if: * You are primarily driven by creating sophisticated graphic designs and branding campaigns (we're not a marketing agency and so the graphics you will primarily be involved in have real world production and installation limitations though they are still visually stunning with the technology we use to produce them) * You do not like to work with your hands to use the printer, plotter, laminator, and other production in our center to produce the final end product for our customers * You get frazzled by busyness and multiple workstreams, and managing the work daily along with the many team members involved with delivering quality products and services to our customers daily * You don't get excited to engage and build relationships with customers, and would rather stay isolated in front of a screen * You are not curious about new technologies in materials and production and prefer to stick with only what you've done before and is easiest * You don't like working with your hands to bring your designs to reality and prefer digital graphics only, and you definitely don't see yourself getting on a ladder to help install the graphics from time to time * You are looking to clock out at 5pm every day and have the same exact schedule every day If all this still sounds good to you, we provide: * Paid Vacation, Holidays, and Sick days * Benefits * Paid travel to training and conventions out of state as you succeed in the role * Opportunities to develop your career and train for other roles, e.g. Graphics & Production Lead, Production Manager, Center Manager, as our Center expands and grows Compensation: $18.00 - $24.00 per hour

When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation's premier propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customers. Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points across the United States. Applications for this position will be accepted until 11/24/2025. Posting Job Summary (Purpose): The Utility Worker primarily works in the outside production area of the AmeriGas Cylinder Exchange facility. The employee is responsible for the processing of cylinders (20 lb. barbeque grill cylinders). Key Characteristics: Models a commitment to safety through his/her own day-to-day behavior; follows company safety procedures and policies Demonstrates high professional and personal standards; has a commitment to quality, timeliness, and continuous improvement Ability to function effectively as a member of a production team Duties and Responsibilities: Sort, inspect, clean, paint, label, and refill empty cylinders. Maintain a safety focus at all times and wear the proper PPE Ensure the consistent quality of cylinders are being processed Load filled cylinders onto the truck(s) for the next day's shipments. Ability to stand and walk 8 - 12 hours per day. Ability to lift 50 pounds repeatedly throughout the day. Perform general housekeeping duties. Knowledge, Skills and Abilities: Ability to follow processes, procedures, and instructions Ability to function effectively as a member of a production team Willingness to grow and learn Basic mechanical aptitude Basic computer knowledge Work in a fast-paced environment Be able to stand 8-10 hours per day Ability to obtain required state licensing Ability to be forklift certified Education and Experience Required: 1 - 2 years work experience in manufacturing is preferred High School Diploma or GED Working conditions: Environmental conditions such as wind, rain, ice, and snow may affect this job, as the production area where the employee spends most of the workday is not enclosed. AmeriGas Propane, Inc. is an Equal Opportunity Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices. AmeriGas is a Drug Free Workplace. Candidates must be willing to submit to a pre-employment drug screen and a criminal background check. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with AmeriGas policies. As a federal contractor that engages in safety-sensitive work, AmeriGas cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis. The pay for this position ranges from $18.00 to $19.00 , depending on circumstances including an applicant's skills and qualifications, certain degrees and certifications, prior job experience, market data, and other relevant factors. Additional compensation may include eligibility to earn a performance-based bonus or commissions on completed sales depending on position. This is the Company's good faith and reasonable estimate of the range of compensation for this position as of the time of posting. The Company offers a wide array of comprehensive benefit programs and services including medical, dental, vision, flexible spending and health savings accounts to our benefits-eligible employees. Additional benefits include retirement savings plans like 401(k) and paid days off such as parental leave, military leave, vacation/paid time off, sick leave in compliance with state law, as applicable, paid holidays, and disability coverage. Some benefits offerings are subject to any legal requirements or limitations, employee eligibility status, and where the employee lives and/or works.

Avery Dennison Corporation (NYSE: AVY) is a global materials science and digital identification solutions company. We are Making Possible™ products and solutions that help advance the industries we serve, providing branding and information solutions that optimize labor and supply chain efficiency, reduce waste, advance sustainability, circularity and transparency, and better connect brands and consumers. We design and develop labeling and functional materials, radio frequency identification (RFID) inlays and tags, software applications that connect the physical and digital, and offerings that enhance branded packaging and carry or display information that improves the customer experience. Serving industries worldwide - including home and personal care, apparel, general retail, e-commerce, logistics, food and grocery, pharmaceuticals and automotive - we employ approximately 35,000 employees in more than 50 countries. Our reported sales in 2024 were $8.8 billion. Learn more at ********************* . At Avery Dennison, some of the great benefits we provide are: Health & Wellness benefits starting on day 1 of employment Paid parental leave 401K eligibility Tuition reimbursement Flexible work arrangements Employee Assistance Program eligibility / Health Advocate Paid vacation and Paid holidays Job Description The Production Operator plays a vital role in ensuring the quality and efficiency of our manufacturing process. This involves inspecting materials and products, identifying and addressing quality issues, and maintaining accurate records. The ideal candidate is a team player with a strong work ethic, a commitment to quality, and the ability to operate basic production equipment. Potential shifts available: A Shift, 8am - 4pm B Shift, 4pm - 12am C Shift, 12am - 8am Activities and duties may vary depending upon site specific needs. Essential functions may include, but are not limited to: Perform material inspection and sorting, ensuring adherence to quality standards and specifications. Conduct in-process and final inspections, utilizing appropriate measuring tools and techniques to verify product conformance. Accurately record inspection data and maintain detailed quality logs, identifying trends and areas for improvement. Participate in root cause analysis and corrective action investigations, contributing to the resolution of quality issues. Collaborate with production personnel to ensure quality standards are met throughout the manufacturing process. Maintain a clean and organized work area, adhering to 5S principles and safety protocols. Actively participate in continuous improvement initiatives, suggesting and implementing process enhancements to improve quality and efficiency. Train and mentor new employees on quality procedures and work instructions. Operate and maintain basic production equipment, ensuring proper setup and calibration. Qualifications Requirements: High School Diploma or equivalent (GED) or 3+ years of relevant manufacturing work experience. Ability to lift up to 50 pounds. Able to obtain Lift Truck Operator's license. Able and willing to work overtime, including short-notice requests. Demonstrate proficiency with computer applications. Maintain a service and quality focus, addressing issues and communicating root causes. Contribute actively in a team environment, promoting open communication. Demonstrate proficiency in key tasks, embrace learning and knowledge sharing, and engage in cross-training. Possess flexibility and dependability to support production and customer focus. Physical Requirements: Movement: May require the ability to stand/walk for up to 80% of your shift, with frequent pushing, pulling, bending, reaching, and squatting 50% of the time. Lifting: May require the ability to lift up to 50 pounds 50% of your shift. Environment: May require being comfortable working in an environment with varying temperatures. Important Note: Reasonable Accommodations: We are committed to providing reasonable accommodations to qualified individuals with disabilities. If you require any accommodations to perform the essential functions of this job, please let us know during the application process. Pre-Hire Medical Questionnaire: Upon accepting a role, you will be required to complete a pre-hire medical questionnaire. This is a standard procedure to ensure your ability to safely perform the job's physical demands and to identify any potential health concerns. Falsification of Medical Information: Falsifying information on the medical questionnaire is a serious offense and may lead to disciplinary actions up to and including termination. Additional Consideration: Safety: We prioritize the safety of all our employees. We provide comprehensive safety training and a safe working environment. The hourly rate for this position is $18.94-$22.73 / hour. The hiring wage rate range above represents what Avery Dennison reasonably expects to pay for this position as of the date of this posting. Actual salaries will vary within the range. In some circumstances, this may be above or below the range (based on various factors, including, but not limited to, a candidate's relevant skills, experience, education and training, location, as well as the job scope and complexity, responsibilities, and regular and/or necessary travel required for the position). That may change, depending on the candidate pool. Avery Dennison reserves the right to modify this information at any time, subject to applicable laws. Additional Information All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or other protected status. EEOE/M/F/Vet/Disabled. All your information will be kept confidential according to EEO guidelines. If you require accommodations to view or apply for a job, alternative methods are available to submit an application. Please contact ************ or [email protected] to discuss reasonable accommodations.

At 4over, we are committed to building a diverse and inclusive workplace welcoming to people of all backgrounds. Providing our employees with job training and opportunities for growth, development, and advancement. We take pride in fostering a safe environment for all employees, Summary: The Bindery Production Assistant is responsible for helping the Bindery Operator with the setup, adjustment and safe operation of all relevant bindery equipment such as: MBO folders with pile and continuous feeders; Heidelberg/Stahl Folders with continuous feeders; and 6 pocket Muller Martini-Presto saddle stitchers to produce quality finished products that meet customer specifications and quality standards. Schedule: 1st shift: Monday-Friday, eight or more hours per day, five days per week based on business needs. Primary schedule will be 5:00 AM - 1:30 PM, Monday - Friday, or similar. Training may occur at other times. Salary Range: $18.00 - 20.00 Hourly Compensation commensurate with experience. At this time, we are not engaging with agencies or third-party recruiters. Thank you for your understanding. Essential Duties and Responsibilities include the following: Checks paper sheet size/type etc., and verify materials required Assists with managing the preparation of next jobs to be printed Assist with press maintenance tasks and cleaning Support the Lead Press Operator by completing tasks as directed to keep the press running Actively remove waste items for recycling Complete and maintain all required paperwork, records, documents, etc. Ensure all equipment, tools, and workstation are in good working order and is free of safety hazards Report workplace hazards to management immediately Wear all assigned Personal Protective Equipment (PPE) when required Report all work related injuries, illnesses, and/or near misses to management immediately Keep all work area/station in compliance with our housekeeping guidelines Follow and comply with all safety and work rules and regulations Maintain departmental housekeeping standards, such as keeping floors swept and absent of debris that may be a work hazard Regularly perform general housekeeping duties in your work area(s) Adhere to all safety policies and protocols and maintain a safe working environment Attend all department/company meetings Other duties as assigned For an extensive listing of duties and responsibilities please refer to the attached Job Description. Qualifications 1 years' experience of working within a fast-paced production or manufacturing environment Preferred High School Diploma or GED equivalency, preferred 4over Company History: 4over was founded in February of 2001. What started off as creating business cards and web page designs by a husband and wife, quickly flourished. Since the company was founded, we are now a private equity owned company growing and expanding across many states. Through our 4over Core Attributes, we are committed to meeting and exceeding customer expectations, cultivating and nurturing our relationships, providing excellence and caring for others. Health and Life Insurance- Medical, Dental, Vision, Life/AD&D Insurance, Disability, and Flexible Spending Accounts (FSAs) for Health Care and Dependent Care 4over pays 100% of the employee's premium for his/her Basic Life/AD&D Insurance in the amount of 1x the employee's annual salary, up to $500,000 Coverage will be effective on the 1st of the month following 1 month of continuous regular full-time employment 401(k) Retirement Plan New employees are eligible to enroll the first of the month, following 1 month of employment Semi-annual open enrollment (January 1st and July 1st) Discretionary employer match; typically, 50% of employee deferrals up to 6% of compensation Immediate Vesting Holidays and PTO 9 Paid Holidays Accumulating PTO to be used after 90-days of continuous and active full-time service 4over is an Equal Opportunity employer. It provides equal employment opportunities to all employees and applicants for employment without regard to race, color, sex, national origin, age, religion, disability, or any other legally protected status and takes affirmative action to recruit, employ, train, and promote qualified minorities, women, covered veterans, and individuals with disabilities.

Fresh-Squeezed Legacy, Bold New Chapter Tropicana Brands Group is a $3B startup aiming to revolutionize the beverage category. Formed in 2022 as a joint venture between PAI Partners and PepsiCo, our portfolio includes iconic brands like Tropicana, Naked, KeVita, Izze, Copella, and Punica. With over 76 years of global leadership in the orange juice category, we're committed to preserving this legacy while driving innovation in other areas. From reimagining orange juice to creating functional smoothies and driving afternoon refreshments, we are striving to become the undisputed global leader in fresh and chilled beverages. Your Next Pour: The Opportunity Tropicana Brands Group is looking for a Production Operator to support our Supply Chain Team. This role will be responsible for activities such as unloading tankers, bins, drums, driving forklifts, pallet jack, floor scrubber, cleaning, sanitation, material handling, ect. Tropicana is looking for a critical thinker with exceptional communication, influencing and relationship management skills who thrives in a fast-paced environment. . Additional responsibilities will include: * Operates and monitors machinery used in the production process * Verifies conformance to quality standards at all levels ( raw, finished, ingredients, storage, and transportation conditions) * Performs autonomous maintenance activities such as preventative maintenance, lubrication, center lining, 5s and defect identification, sources of contamination. ect. * Participate in periodical activities such assisting with the cycle counts and physical inventories * Performs duties and responsibilities within the guidelines of plant's programs and initiatives (i.e.: SFTPM) * All other duties as assigned by managemet The Perfect Blend: Experience * Minimum 1 year of recent work experience in a manufacturing facility, food production preferred Foundational Ingredients: Requirements * Must be located in Oxnard, CA surrounding area or willing to relocate for the duration of employment * Willingness to be onsite at the manufacturing facility on a full-time basis * Must be able to perform physical tasks for the duration of the shift, including standing, walking, bending, reaching, and lifting/moving items weighing 50 pounds or more * Must be legally authorized to work in the United States without the need for employer sponsorship now or in the future * High School Diploma, GED or equivalent * Knowledge of basic math & problem solving * Must be able to utilize manufacturing software * Ability to operate equipment and machines in an industrial environment * Ability to perform work within established guidelines in a safe manner * Ability to work independently and in teams * Must be able to obtain forklift certification Benefits TBG is pleased to offer you a comprehensive benefits package which includes medical, dental, vision, company provided life, STD and LTD insurance. In addition, you may also elect to participate in voluntary life, accident, hospital, and critical illness coverages. The hourly pay for this position is $24.51.

Job Description Qualifications: This site uses Kronos for timekeeping. Manufacturing Forklift experience Packaging Responsibilities: Manufacturing Forklift experience Packaging Comments/Special Instructions What is the working schedule for this position - 1st shift, 6:00 AM - 2:30 PM What experiences/skills would stand out on a resume for this position (Must haves VS Nice to have) - We would like someone with prior manufacturing experience. Will there be a possibility of an extension for this role or is this a temp- to -perm - There may be an opportunity to hire permanently for this role. Will Overtime be offered - We may have OT as well. What would the interview process look like (in-person or teams, will there be a 2nd interview) - In-person interview Does the worker need to come with PPE, or will it be provided if required if needed - We will provide the PPE\'s, but the worker needs to have steel toed boots. Is the facility a temperature-controlled environment - Yes.

Responsible for performing manual fabrication operations, as well as operating basic machine shop tools and other fabrication machinery, to produce parts within an expected timeframe. ESSENTIAL FUNCTIONS OF THE JOB: Operates a variety of machines, tools and other equipment (with major emphasis in hydraulic or pneumatic presses, bench grinders, abrasive blasting machines, vibratory tumblers, rotary deburring and polishing tools, but may also include lathes, mills, drill presses, grinders, and manual operations) to produce, assemble or test parts per instructions, blueprints or other technical drawings. Properly maintains and performs minor routine maintenance to machines utilized. Evaluates parts or material by measuring with appropriate instruments and may perform simple testing to validate parts or material conforms to requirements. Documents information as required per the work instruction or as instructed and reports any discrepancies to the supervisor, lead, and/or engineer. Maintains a safe work environment and adheres to all safety procedures and protocols, including the use of personal protective equipment (PPE). Supports area organization and fosters a continuous improvement mindset. Adheres to the company's policies and promotes a healthy and positive work culture. The preceding functions have been provided as examples of the types of work performed by employees assigned to this job function. Management reserves the right to add, modify, change or rescind the work assignments of different positions and to make reasonable accommodations so that qualified employees can perform the essential functions of the job. EDUCATION: High School diploma or General Education Degree (GED) preferred. EXPERIENCE: 0-2 years of factory experience KNOWLEDGE/SKILLS/ABILITIES: Must be able to read blueprints Must read, write and speak English Ability to apply common sense understanding to carry out instructions furnished in written, oral or diagram form. Ability to work well with engineers, supervisors and other machinist. Able to manage tasks and meet production deadlines. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be a U.S. Person which is defined as a U.S. citizen, a lawful permanent resident [“green card” holders], U.S. National, Refugee, or Asylee. Please note that the salary range information is only applicable for California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee's pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Salary Range: $18-22 hourly. Relocation assistance not available and we are only considering local candidates. RBC Bearings is an Equal Opportunity Employer to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws

PRODUCTION ASSEMBLER EARN $600 - Come join the team for a successful start of the new 2 nd shift in the Appetizer department! “2 nd Shift Start Up incentive pay” for the Appetizers department. Employees, or individuals newly hired, who join this department on 2 nd shift, will receive extra pay: $160 after completing first 30 days*, and $200 after completing 60 days *, and $240 after completing 90 days* *To be eligible for “2 nd Shift Start Up incentive” pay for the 2 nd shift Appetizer department, you will need to complete the 30, 60 and 90 days with an acceptable attendance record, and demonstrate progressive learning for your particular position in the department. SUMMARY OF POSITION The Assembler is responsible for packaging food products while following the Food and Employee Safety Programs and Guidelines of the company. PRIMARY RESPONSIBILITIES · Load materials and products into package processing equipment. · Checking products for quality on the production line and removing defective items. · Keeping machines supplied with packaging materials and labels. · Reporting machine faults to shift supervisors and maintenance staff. · Press switches and turn knobs to start machines to package products. · Making minor adjustments to machine settings to handle changes from one type of product or container to another. · Observe and listen to equipment to detect possible malfunctions, such as leaks or plugging, and report malfunctions or undesirable tastes to supervisors. · Monitor lot numbers, expiration dates and/or manufacturing dates for each product. · Mark and label food products, using marking tools. · Measure, weigh, and count products and materials. · Examine and inspect materials and products to ensure that packing specifications are met. · Record product, packaging, and order information on specified forms and records. · Remove completed or defective products or materials, placing them on moving equipment such as conveyors or in specified areas. · Seal materials, using a case sealing machine and hand tools. · Clean materials, supplies, or work areas, using cleaning solutions and hand tools. · Move completed boxes from conveyor line and assemble a pallet of product. · Lift finished products, and packed items manually. · Count finished products to determine if product orders are complete. This is for our 2nd shift, starting at 2pm in the afternoon from Monday thru Friday (will require Weekends if needed)

Operators are responsible for a variety of product assembly, inspection, testing, operation of equipment/tools and material/component processing tasks to meet production schedule requirements to the high-quality standard expected by Client. Essential Functions: Safely and efficiently meeting all production work requirements assigned to you by following operating procedures and work instructions. Trouble shoot problems quickly and efficiently, seeking advice where necessary. To produce the highest standard of quality products possible in accordance with the company's ISO 9001: 2015 procedures. Visually inspect products throughout the stages of production to identify defective parts, component orientation errors, missing components, or wrong part insertion. Initial testing for product conformity. Assist others to provide an organized and clean workplace including: all areas of the plant, workstations, equipment, walkways, and break rooms using 5S procedures. Participation in and implementation of continuous improvement projects. Other duties as assigned. Qualifications High school diploma or GED required. Experience working in a manufacturing or industrial setting preferred. Ability to read and comprehend written instructions, as well as, comprehend verbal instructions and effectively communicate verbally. Computer Familiarity. Ability to self-start yet take orders as directed. Ability to move and lift up to 25 pounds. Ability to sit or stand as required to perform essential functions. Consistent and punctual attendance required. Must be available to work assigned shifts and required overtime. Preferred Qualifications Brazing, soldering, mechnical calibration, and/or mechanical testing experience.

Job DescriptionDescription: COMPANY DESCRIPTION: Union Rescue Mission (URM) is a 501(c)(3) nonprofit organization located in the Los Angeles Metropolitan Area. We are dedicated to serving men, women, and children experiencing homelessness and providing comprehensive emergency and long-term services to help them escape the dangerous streets of Skid Row. Established in 1891, URM is now one of the largest rescue missions of its kind in the United States and the oldest in Los Angeles. Join us at Union Rescue Mission as we bring hope and share the compassion of Christ to those devastated by homelessness. POSITION SUMMARY: Under the supervision of the Thrift Store Manager, the Thrift Store Floor Production Worker (Part-Time) is responsible for assisting the production crew in cleaning, prep, and tagging merchandise such as bric-a-brac, books, electronics, shoes, accessories, household items, etc. CORE WORK PRINCIPLE: Colossians 3:23 is the foundation of URM's standard for employment, “Whatever you do, work at it with all your heart, as though you were working for the Lord and not for people.” The goal for each employee is to enrich and sustain a humble heart attitude; to enrich and sustain a mindset of serving others, treating them with kindness and truth; and to enrich and sustain a zealous desire for achieving work objectives without any ulterior motives or agendas. THRIFT STORE FLOOR PRODUCTION WORKER (PART-TIME) ESSENTIAL FUNCTIONS: Cleans, tags, and packs merchandise for pricing. Determines which items are perishable and which are recyclable and discards unsellable items. Assists other departments/positions, as needed. Sets the pace for sorting. Records production numbers daily. (i.e., carts, units, etc.) Communicates regularly with management about store issues. Actively engages customers on floor sales to increase donations and merchandise sales. Ensures monthly revenue goals are met. Provides excellent customer service by greeting and assisting customers and donors; and responds to customer inquiries/complaints in a timely manner. Ensures store and displays are maintained, clean, and attractive. Maintains safety including all Health and Security policies and procedures. Conducts tasks and other projects as assigned by the Store Manager. Commitment to URM mission, vision, and core values. Encourages guests in their faith and growth in Jesus Christ. THRIFT STORE FLOOR PRODUCTION WORKER (PART-TIME) PHYSICAL DEMANDS: In general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to allow differently able individuals to perform the essential functions of the job. Must be able to lift 50 lbs. Requires manual dexterity for regular repetitive finger motion such as frequent reaching, pulling, pushing and lifting objects and operating equipment. Requires manual ability to operate a pallet jack. May be exposed to handling hazardous materials such as broken glass. THRIFT STORE FLOOR PRODUCTION WORKER (PART-TIME) WORK ENVIRONMENT: In general, the following conditions of the work environment are representative of those that an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to allow differently able individuals to perform the essential functions of the job within the environment. The office is clean, orderly, properly lighted, and ventilated. This position works predominantly indoors in a store, warehouse, or dock environment all of which are high traffic settings involving people, equipment and/or machinery. May be exposed to dust in the performance of certain duties. Noise levels are considered moderate to high. Requires regular standing, walking, sitting, crouching, stooping, speaking, hearing, and seeing. May be exposed to extreme temperatures both hot and cold (variable weather). Requirements: THRIFT STORE FLOOR PRODUCTION WORKER (PART-TIME) EXPERIENCE/EDUCATION/LICENSURES/CERTIFICATIONS: High school diploma or equivalent, required. Thrift store, warehouse, assembly line or restaurant experience, a plus. THRIFT STORE FLOOR PRODUCTION WORKER (PART-TIME) KNOWLEDGE/ SKILLS/ ABILITIES: Fluency in Spanish, both verbal and written, a plus. Ability to demonstrate a strong work ethic. Perform in a fast-paced environment and possess strong organizational skills. Ability to determine the value of donations. Must exhibit strong customer service skills. Clear communication skills, both written and oral. Excellent time management skills and detail oriented. Ability to multi-task in a high-volume environment. Must be an effective team member. Must be able to work a flexible schedule, including weekends.

Job Title: Lead Production Associate Reports to: Kitchen Production Manager Company: JustFoodForDogs, LLC Job Type: Full-time, Non-Exempt At JustFoodForDogs, we're dedicated to helping pets live longer, healthier lives through the power of fresh, whole food. We're looking for passionate and driven Lead Production Associates to help bring that mission to life in our open-to-the-public kitchens. Our ideal Lead Production Associate is a hands-on leader who thrives in a fast-paced environment and sets the standard for food safety, quality, and efficiency. You'll guide and support our kitchen team including cooks, mixers, packagers, and rovers, while ensuring every batch is prepared with care and precision. Strong organization, time-management, and leadership skills are a must, along with a genuine love for pets and real food. If you're ready to lead with heart and help us feed more dogs and cats the food they deserve, apply today and join the pack! Key Responsibilities Effectively manage workflow to achieve goals in a timely manner Work with General Manager and Assistant General Manager to develop staff schedules Leads by exemplifying team management, setting and meeting goals, and problem solving Ensure proper food preparation and maintain critical control points, including monitoring and correcting food temperatures as needed Works shifts in the cooking and packaging departments to execute daily production Cooks: Responsible for preparing and cooking human grade pet food in small batches to ensure the highest safety and quality Mixers: Complete recipes by adding oils, nutrients, and operating mixer to ensure evenly distributed ingredients; weigh and transfer finished product for packaging Packagers: Ensure packages are accurately labeled, weighed and sealed; operate and maintain sealers to highest standards; fulfill requested quantities and transfer to freezer Rovers: Prepare production and transfer documents, labels, move finished products to process supply deliveries Assists with clean-up during and at end of shift Comply with sanitation regulations and safety standards Maintain a positive and professional approach with coworkers and customers Competencies and Qualifications Team leadership experience and skills Kitchen experience Ability to multitask Attention to detail; ability to conduct repetitive tasks with quality General understanding of basic kitchen functions, various cooking methods, ingredients, equipment and procedures Accuracy and speed in executing assigned tasks Organizational skills ServSafe certification preferred Tenets of the Pack (Company Values) Live Our Mission - We believe this is more than a job. It's a cause. Be a Team Player - We put company goals and success first. Maintain a Positive Attitude - We bring energy, enthusiasm, and drive to everything we do. Deliver Results - We play to win. JUSTFOOD FORDOGS is an Equal Opportunity Employer. JUSTFOOD FORDOGS does not discriminate due to race, color, creed, religion, sex, sexual orientation, gender and/or gender identity or expression, marital or parental status, national origin, ethnicity, citizenship status, veteran or military status, age, disability, unemployment status or any other legally protected basis, and to the extent permitted by law.

Who WE Are: FASTSIGNS of Orange is a family owned, independently operated franchisee of FASTSIGNS. We are a new center rising from the chaos of the pandemic and just started this summer to be the graphics and signage partner of choice for our community! We consult, design, produce, source, and install visual communication assets for our customers. i.e. we don't just make signs! As a family owned center, we are committed to building an enduring business through providing long term careers for our staff to build their skills and professional careers, being the partner and advisor of choice to businesses we serve for all their visual communication needs, and creating a profitable business from which we can give back to our community. And have fun and make some money along the way of course! :) Job Title: Commercial Sign Production/Installation Team member Key Responsibilities: Produce, or assist the Production Lead to make, finished products for our customers Assist with installation as needed Work with the sales and installation team members to ensure customer satisfaction with the finished products Work with the sales team to translate estimates and orders in the order system to create proofs and layouts Design customer orders with the focus on the final product to factor in how it will be produced in center or through our vendors Scheduling the daily workflow of graphics design, printing, production, and installation This position is for you if: You have a Great ATTITUDE: enjoy learning, work best in a team, and have a strong sense of personal accountability to create results for yourself and your team Enjoy problem solving to meet customer's needs, and go the extra step to help them create a vision of what the solution could look like Detail oriented and organized to ensure a smooth and efficient workflow with the team and for our customers (You will be doing some light project management each day to coordinate with the sales and install team members on where each order is in the workflow and help to prioritize the work) Have at least 2 years experience in both commercial sign production (physically operating large format vinyl printers and plotters) and sign installation Fluent with Adobe Illustrator and Photoshop (That is the main graphics software we use) Fluent with Google's G-Suite (We use that heavily as part of our working environment) Able to lift and carry up to 50lbs (You may need to help our with the delivery of graphics to the customer site, or else help customers load products into their vehicles from our center) Can climb ladders (You may have to occasionally assist on complex installs with the Production Lead) Other "nice" to haves that will put you on the top of our list: Worked at other FASTSIGNS centers, or other similar competitors in the industry Extensive graphics installation experience - dimensional, monument, electrical, car wraps, etc Extensive experience with large format printing and/or graphics/signage production - managing the printing process as well as mounting onto substrates This position is NOT for you if: You are primarily driven by creating sophisticated graphic designs and branding campaigns (we're not a marketing agency and so the graphics you will primarily be involved in have real world production and installation limitations though they are still visually stunning with the technology we use to produce them) You do not like to work with your hands to use the printer, plotter, laminator, and other production in our center to produce the final end product for our customers You get frazzled by busyness and multiple workstreams, and managing the work daily along with the many team members involved with delivering quality products and services to our customers daily You don't get excited to engage and build relationships with customers, and would rather stay isolated in front of a screen You are not curious about new technologies in materials and production and prefer to stick with only what you've done before and is easiest You don't like working with your hands to bring your designs to reality and prefer digital graphics only, and you definitely don't see yourself getting on a ladder to help install the graphics from time to time You are looking to clock out at 5pm every day and have the same exact schedule every day If all this still sounds good to you, we provide: Paid Vacation, Holidays, and Sick days Benefits Paid travel to training and conventions out of state as you succeed in the role Opportunities to develop your career and train for other roles, e.g. Graphics & Production Lead, Production Manager, Center Manager, as our Center expands and grows Compensation: $18.00 - $24.00 per hour At FASTSIGNS, every day is unique and presents exciting opportunities, including new ways to use your talent and grow your skills. We have a large network of independently owned locations - both locally and internationally - who offer competitive pay and ongoing training opportunities. Are you ready to plan for your future? Discover your next career. Make your statement. Learn more by exploring the positions offered by FASTSIGNS centers. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to FASTSIGNS Corporate.

The Production Operator plays a vital role in ensuring the quality and efficiency of our manufacturing process. This involves inspecting materials and products, identifying and addressing quality issues, and maintaining accurate records. The ideal candidate is a team player with a strong work ethic, a commitment to quality, and the ability to operate basic production equipment. Potential shifts available: A Shift, 8am - 4pm B Shift, 4pm - 12am C Shift, 12am - 8am Activities and duties may vary depending upon site specific needs. Essential functions may include, but are not limited to: * Perform material inspection and sorting, ensuring adherence to quality standards and specifications. * Conduct in-process and final inspections, utilizing appropriate measuring tools and techniques to verify product conformance. * Accurately record inspection data and maintain detailed quality logs, identifying trends and areas for improvement. * Participate in root cause analysis and corrective action investigations, contributing to the resolution of quality issues. * Collaborate with production personnel to ensure quality standards are met throughout the manufacturing process. * Maintain a clean and organized work area, adhering to 5S principles and safety protocols. * Actively participate in continuous improvement initiatives, suggesting and implementing process enhancements to improve quality and efficiency. * Train and mentor new employees on quality procedures and work instructions. * Operate and maintain basic production equipment, ensuring proper setup and calibration. Requirements: * High School Diploma or equivalent (GED) or 3+ years of relevant manufacturing work experience. * Ability to lift up to 50 pounds. * Able to obtain Lift Truck Operator's license. * Able and willing to work overtime, including short-notice requests. * Demonstrate proficiency with computer applications. * Maintain a service and quality focus, addressing issues and communicating root causes. * Contribute actively in a team environment, promoting open communication. * Demonstrate proficiency in key tasks, embrace learning and knowledge sharing, and engage in cross-training. * Possess flexibility and dependability to support production and customer focus. Physical Requirements: * Movement: May require the ability to stand/walk for up to 80% of your shift, with frequent pushing, pulling, bending, reaching, and squatting 50% of the time. * Lifting: May require the ability to lift up to 50 pounds 50% of your shift. * Environment: May require being comfortable working in an environment with varying temperatures. Important Note: * Reasonable Accommodations: We are committed to providing reasonable accommodations to qualified individuals with disabilities. If you require any accommodations to perform the essential functions of this job, please let us know during the application process. * Pre-Hire Medical Questionnaire: Upon accepting a role, you will be required to complete a pre-hire medical questionnaire. This is a standard procedure to ensure your ability to safely perform the job's physical demands and to identify any potential health concerns. * Falsification of Medical Information: Falsifying information on the medical questionnaire is a serious offense and may lead to disciplinary actions up to and including termination. Additional Consideration: Safety: We prioritize the safety of all our employees. We provide comprehensive safety training and a safe working environment. The hourly rate for this position is $18.94-$22.73 / hour. The hiring wage rate range above represents what Avery Dennison reasonably expects to pay for this position as of the date of this posting. Actual salaries will vary within the range. In some circumstances, this may be above or below the range (based on various factors, including, but not limited to, a candidate's relevant skills, experience, education and training, location, as well as the job scope and complexity, responsibilities, and regular and/or necessary travel required for the position). That may change, depending on the candidate pool. Avery Dennison reserves the right to modify this information at any time, subject to applicable laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or other protected status. EEOE/M/F/Vet/Disabled. All your information will be kept confidential according to EEO guidelines. If you require accommodations to view or apply for a job, alternative methods are available to submit an application. Please contact ************ or ********************************** to discuss reasonable accommodations.

At 4over, we are committed to building a diverse and inclusive workplace welcoming to people of all backgrounds. Providing our employees with job training and opportunities for growth, development, and advancement. We take pride in fostering a safe environment for all employees, Summary: The Bindery Production Assistant is responsible for helping the Bindery Operator with the setup, adjustment and safe operation of all relevant bindery equipment such as: MBO folders with pile and continuous feeders; Heidelberg/Stahl Folders with continuous feeders; and 6 pocket Muller Martini-Presto saddle stitchers to produce quality finished products that meet customer specifications and quality standards. Schedule: 1st shift: Monday-Friday, eight or more hours per day, five days per week based on business needs. Primary schedule will be 5:00 AM - 1:30 PM, Monday - Friday, or similar. Training may occur at other times. Salary Range: $18.00 - 20.00 Hourly Compensation commensurate with experience. At this time, we are not engaging with agencies or third-party recruiters. Thank you for your understanding. Essential Duties and Responsibilities include the following: * Checks paper sheet size/type etc., and verify materials required * Assists with managing the preparation of next jobs to be printed * Assist with press maintenance tasks and cleaning * Support the Lead Press Operator by completing tasks as directed to keep the press running * Actively remove waste items for recycling * Complete and maintain all required paperwork, records, documents, etc. * Ensure all equipment, tools, and workstation are in good working order and is free of safety hazards * Report workplace hazards to management immediately * Wear all assigned Personal Protective Equipment (PPE) when required * Report all work related injuries, illnesses, and/or near misses to management immediately * Keep all work area/station in compliance with our housekeeping guidelines * Follow and comply with all safety and work rules and regulations * Maintain departmental housekeeping standards, such as keeping floors swept and absent of debris that may be a work hazard * Regularly perform general housekeeping duties in your work area(s) * Adhere to all safety policies and protocols and maintain a safe working environment * Attend all department/company meetings * Other duties as assigned For an extensive listing of duties and responsibilities please refer to the attached Job Description. Qualifications * 1 years' experience of working within a fast-paced production or manufacturing environment Preferred * High School Diploma or GED equivalency, preferred 4over Company History: 4over was founded in February of 2001. What started off as creating business cards and web page designs by a husband and wife, quickly flourished. Since the company was founded, we are now a private equity owned company growing and expanding across many states. Through our 4over Core Attributes, we are committed to meeting and exceeding customer expectations, cultivating and nurturing our relationships, providing excellence and caring for others. Health and Life Insurance- * Medical, Dental, Vision, Life/AD&D Insurance, Disability, and Flexible Spending Accounts (FSAs) for Health Care and Dependent Care * 4over pays 100% of the employee's premium for his/her Basic Life/AD&D Insurance in the amount of 1x the employee's annual salary, up to $500,000 * Coverage will be effective on the 1st of the month following 1 month of continuous regular full-time employment 401(k) Retirement Plan * New employees are eligible to enroll the first of the month, following 1 month of employment * Semi-annual open enrollment (January 1st and July 1st) * Discretionary employer match; typically, 50% of employee deferrals up to 6% of compensation * Immediate Vesting Holidays and PTO * 9 Paid Holidays * Accumulating PTO to be used after 90-days of continuous and active full-time service 4over is an Equal Opportunity employer. It provides equal employment opportunities to all employees and applicants for employment without regard to race, color, sex, national origin, age, religion, disability, or any other legally protected status and takes affirmative action to recruit, employ, train, and promote qualified minorities, women, covered veterans, and individuals with disabilities.

RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing and manufacturing capabilities for the diversified industrial, aerospace and defense markets. We currently have 56 facilities, of which 37 are manufacturing facilities in ten countries and our market capitalization is approximately $6.2 billion. ESSENTIAL FUNCTIONS OF THE JOB: Performs typical machine shop and mold press operations to support the assembly floor. Detects and reports defective materials or questionable conditions to the department supervisor. Maintains the work area and equipment in a clean orderly condition and follows prescribed safety regulations. Performs prescribed preventative maintenance on machines as required per the P.M. charts. Must be able to perform but not limited to the following tasks: milling, turning, drilling, taping, de-burring, molding and all bench operations and inspect. Must be familiar with the basic machine functions in order to perform the tasks stated above. Must be willing to accept and receive frequent supervision and assistance with regard to machine set-up. EDUCATION: High School diploma or General Education Degree (GED) preferred. EXPERIENCE: 0-3 years of factory-related experience. Training in general safety, electrostatic discharge awareness, foreign object damage awareness and quality system awareness. KNOWLEDGE/SKILLS/ABILITIES: Competence to read and comprehend simple instructions, short correspondence, and memos. Ability to present information effectively one-on-one. Good computer, math and reading skills needed. Ability to apply common sense understanding to carry out instructions furnished in written, oral or diagram form. PHYSICAL AND ENVIRONMENTAL ELEMENTS: While performing the duties of this job, the employee generally works indoors within the office and manufacturing areas. The employee is occasionally exposed to moving mechanical parts, fumes or airborne particles and toxic or caustic chemicals. The noise level in the work environment is usually moderate or loud. The employee is regularly required to sit and talk or to hear. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a US citizen, lawful permanent resident [“green card” holders] or have refugee or asylee status. **Please note that the salary range information is only applicable for California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee's pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Pay Range: $18 to $20/hour RBC Bearings is an Equal Opportunity Employer to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Reference #27.2-0/1

Job DescriptionDescription: : Union Rescue Mission (URM) is a 501(c)(3) nonprofit organization located in the Los Angeles Metropolitan Area. We are dedicated to serving men, women, and children experiencing homelessness and providing comprehensive emergency and long-term services to help them escape the dangerous streets of Skid Row. Established in 1891, URM is now one of the largest rescue missions of its kind in the United States and the oldest in Los Angeles. Join us at Union Rescue Mission as we bring hope and share the compassion of Christ to those devastated by homelessness. POSITION SUMMARY: Under the supervision of the Thrift Store Manager, the Thrift Store Production Worker is responsible for assisting the production crew in cleaning, prep, and tagging merchandise such as clothing, books, electronics, shoes, accessories, household items, etc. CORE WORK PRINCIPLE: Colossians 3:23 is the foundation of URM's standard for employment, “Whatever you do, work at it with all your heart, as though you were working for the Lord and not for people.” The goal for each employee is to enrich and sustain a humble heart attitude; to enrich and sustain a mindset of serving others, treating them with kindness and truth; and to enrich and sustain a zealous desire for achieving work objectives without any ulterior motives or agendas. THRIFT STORE FLOOR PRODUCTION WORKER ESSENTIAL FUNCTIONS: Cleans, tags, and packs merchandise for pricing. Determines which items are perishable and which are recyclable and discards unsellable items. Assists other departments/positions, as needed. Sets the pace for sorting. Records production numbers daily. (i.e., carts, units, etc.) Communicates regularly with management about store issues. Actively engages customers on floor sales to increase donations and merchandise sales. Ensures monthly revenue goals are met. Provides excellent customer service by greeting and assisting customers and donors; and responds to customer inquiries/complaints in a timely manner. Ensures store and displays are maintained, clean, and attractive. Maintains safety including all Health and Security policies and procedures. Conducts tasks and other projects as assigned by the Thrift Store Manager/Supervisor. Commitment to URM mission, vision, and core values. Encourages guests in their faith and growth in Jesus Christ. THRIFT STORE FLOOR PRODUCTION WORKER PHYSICAL DEMANDS: In general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation(s) may be made to allow differently able individuals to perform the essential functions of the job. Must be able to lift 50 lbs. Requires regular standing, walking, sitting, crouching, stooping, speaking, hearing and seeing. Requires manual dexterity for regular repetitive finger motion such as frequent reaching, pulling, pushing, and lifting objects and operating equipment. Requires manual ability to operate a pallet jack. May be exposed to handling hazardous materials such as broken glass. THRIFT STORE FLOOR PRODUCTION WORKER WORK ENVIRONMENT: In general, the following conditions of the work environment are representative of those that an employee encounters while performing the essential functions of this job. Reasonable accommodation(s) may be made to allow differently abled individuals to perform the essential functions of the job within the environment. The office is clean, orderly, properly lighted, and ventilated. This position works predominantly indoors in a store, warehouse, or dock environment all of which are high traffic settings involving people, equipment and/or machinery. May be exposed to dust in the performance of certain duties. Noise levels are considered moderate to high. May be exposed to extreme temperatures both hot and cold (variable weather). Requirements: THRIFT STORE FLOOR PRODUCTION WORKER EXPERIENCE/ EDUCATION/LICENSURES/CERTIFICATIONS: High school diploma or equivalent, required. Thrift store, retail store, warehouse, assembly line or restaurant experience, a plus. THRIFT STORE FLOOR PRODUCTION WORKER KNOWLEDGE/ SKILLS/ ABILITIES: Fluency in Spanish, both verbal and written, a plus. Ability to demonstrate a strong work ethic. Perform in a fast-paced environment and possess strong organizational skills. Ability to determine the value of donations. Must exhibit strong customer service skills. Clear communication skills, both written and oral. Excellent time management skills and detail oriented. Ability to multi-task in a high-volume environment. Must be an effective team member. Must be able to work a flexible schedule, including weekends.