Production team member jobs in San Buenaventura, CA - 129 jobs

All

Production Team Member

Production Worker

Production Technician

Production Operator

Production Assembler

Production Technician II
Aerovironment 4.6
Production team member job in Simi Valley, CA
The primary responsibility of the Production Technician II will be to test/assemble Small Unmanned Arial System products in our manufacturing facility following released engineering drawings and assembly instructions using our work order system. Position Responsibilities Primary duty is the mechanical assembly of subassemblies using small hand and/or power tools. Some soldering may be required Final assembly of ground control equipment and air vehicles Testing and troubleshooting of subassemblies and final assemblies Works with other Production Technicians and Engineering to correct and improve upon any documents related to the assembly process at the required high quality standard Works with manufacturing engineers to improve assembly efficiency, improve product quality, reduce manufacturing costs and validate released assembly/ fabrication documentation Responsible for ensuring that work order protocols are followed and that work order paperwork is completed as the work is performed May also train other technicians to build a product or follow an established assembly process May conduct in-process quality checks to ensure that items built are to established high quality standards Follows established procedures on routine work and may require instruction on new assignments Maintains a clean and safe work environment Other duties as assigned Basic Qualifications (Required Skills & Experience) High School diploma or GED equivalent is required or equivalent combination of education, training, and experience Minimum of 1 - 2 years of experience in a manufacturing or production environment in either electronics or electro-mechanical assembly and test or equivalent combination of education, training, and experience Experience with hand tools, including crimpers, drills, taps, torque wrenches, power tools and air tools is required Ability to read blueprints and schematics is desired Ability to solder as part of assembly function and duties Must have good manual dexterity and basic computer operation skills Must have strong oral and written communication skills to communicate effectively with employees in the Company Strong analytical, problem-solving skills and attention to detail with ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form Other Qualifications & Desired Competencies Vocational training in Electronics or Solder Certification is preferred Versed in Lean Manufacturing methodologies is desired Familiarity with Safety and ESD practices is desired Work with engineering on new product development efforts where documentation and assembly instructions are not yet finalized Applies acquired job skills, company policies and procedures to complete assigned tasks under minimal supervision Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties Displays strong initiative and drive to accomplish goals and meet company objectives Takes ownership and responsibility for current and past work products Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company Focuses on teamwork, collaboration and puts the success of the team above one's own interests Physical Demands Ability to work in a manufacturing environment Ability to frequently use hand tools (e.g. clamps) using light, minimal force Regularly required to sit for long periods and occasionally stand for short periods Frequently lift and/or carry objects of small size between 2lbs and 5lbs Frequently required to use hand to finger, handle, or feel objects, tools, or controls and balance Occasionally required to walk Occasionally required to reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus Clearance Level Clearance Level The salary range for this role is: $17 - $24 AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: T his position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR U.S. Citizenship required
$17-24 hourly Auto-Apply 60d+ ago

Looking for a job?

Let Zippia find it for you.

Production Operator
Tropicana Products, Inc. 4.9
Production team member job in Oxnard, CA
Fresh-Squeezed Legacy, Bold New Chapter Tropicana Brands Group is a $3B startup aiming to revolutionize the beverage category. Formed in 2022 as a joint venture between PAI Partners and PepsiCo, our portfolio includes iconic brands like Tropicana, Naked, KeVita, Izze, Copella, and Punica. With over 76 years of global leadership in the orange juice category, we're committed to preserving this legacy while driving innovation in other areas. From reimagining orange juice to creating functional smoothies and driving afternoon refreshments, we are striving to become the undisputed global leader in fresh and chilled beverages. Your Next Pour: The Opportunity Tropicana Brands Group is looking for a Production Operator to support our Supply Chain Team. This role will be responsible for activities such as unloading tankers, bins, drums, driving forklifts, pallet jack, floor scrubber, cleaning, sanitation, material handling, ect. Tropicana is looking for a critical thinker with exceptional communication, influencing and relationship management skills who thrives in a fast-paced environment. . Additional responsibilities will include: * Operates and monitors machinery used in the production process * Verifies conformance to quality standards at all levels ( raw, finished, ingredients, storage, and transportation conditions) * Performs autonomous maintenance activities such as preventative maintenance, lubrication, center lining, 5s and defect identification, sources of contamination. ect. * Participate in periodical activities such assisting with the cycle counts and physical inventories * Performs duties and responsibilities within the guidelines of plant's programs and initiatives (i.e.: SFTPM) * All other duties as assigned by managemet The Perfect Blend: Experience * Minimum 1 year of recent work experience in a manufacturing facility, food production preferred Foundational Ingredients: Requirements * Must be located in Oxnard, CA surrounding area or willing to relocate for the duration of employment * Willingness to be onsite at the manufacturing facility on a full-time basis * Must be able to perform physical tasks for the duration of the shift, including standing, walking, bending, reaching, and lifting/moving items weighing 50 pounds or more * Must be legally authorized to work in the United States without the need for employer sponsorship now or in the future * High School Diploma, GED or equivalent * Knowledge of basic math & problem solving * Must be able to utilize manufacturing software * Ability to operate equipment and machines in an industrial environment * Ability to perform work within established guidelines in a safe manner * Ability to work independently and in teams * Must be able to obtain forklift certification Benefits TBG is pleased to offer you a comprehensive benefits package which includes medical, dental, vision, company provided life, STD and LTD insurance. In addition, you may also elect to participate in voluntary life, accident, hospital, and critical illness coverages. The hourly pay for this position is $24.51.
$24.5 hourly 7d ago
Production Worker 4
RTX Corporation
Production team member job in Goleta, CA
**Country:** United States of America ** Onsite **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance **Security Clearance Type:** DoD Clearance: Secret **Security Clearance Status:** Active and existing security clearance required after day 1 At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. We have an opening for a Production Worker 4 in our Class 7 Clean Room Facility in Goleta, California, that is involved in the packaging of IR detectors for high-reliability space, military, and commercial applications. We need a skilled electro-mechanical technician in support of a variety of program processes as assigned by management. The selected candidate will be working with critical dewars and subassemblies. **What You Will Do** + Must be able to work extended periods of time in an environmentally controlled area (cleanroom). + Technicians are required to communicate in English and must be able to understand written and verbal instructions in English. + The ability to use a computer to access work instructions, perform data entry, and complete on-line training is required. + You must wear company provided Personal Protective Equipment (PPE) and strictly follow all safety-related processes, procedures, and protocols. + Tasks may require the ability to push a cart, extend arms above shoulder height, and be able to visually inspect small parts. + Tasks may include working with chemicals (epoxies, adhesives, solvents, etc.) and following rigorous disciplined methodologies and instructions. + This is a 1st shift, onsite position. **Qualifications You Must Have** + Typically requires HS diploma (or equivalent, e.g. G.E.D in the US) or vocational/ technical education in related discipline with a minimum of 4 years of relevant experience. + Minimum of four years' relevant experience in manufacturing or operations. + Experience using general lab equipment like microscopes and small hand-held tools (tweezers, screwdrivers, etc.) + U.S. Citizenship status is required, as this position will require the ability to access U.S. only data systems. **Qualifications We Prefer** + Experience using manual or automated wire bonders or tab bonders as well as pull testing equipment. + Previous experience working in a cleanroom, around ESD sensitive parts is a plus. + Experience with FOD and FOD reduction methods. **What We Offer** Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. _Relocation assistance not provided for this position._ **Learn More & Apply Now!** Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. _The salary range for this role is $31-$35/hour. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills._ **_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._** Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
$31-35 hourly 9d ago
Production Worker 4
RTX
Production team member job in Goleta, CA
Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance Type: DoD Clearance: Secret Security Clearance Status: Active and existing security clearance required after day 1 At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. We have an opening for a Production Worker 4 in our Class 7 Clean Room Facility in Goleta, California, that is involved in the packaging of IR detectors for high-reliability space, military, and commercial applications. We need a skilled electro-mechanical technician in support of a variety of program processes as assigned by management. The selected candidate will be working with critical dewars and subassemblies. What You Will Do Must be able to work extended periods of time in an environmentally controlled area (cleanroom). Technicians are required to communicate in English and must be able to understand written and verbal instructions in English. The ability to use a computer to access work instructions, perform data entry, and complete on-line training is required. You must wear company provided Personal Protective Equipment (PPE) and strictly follow all safety-related processes, procedures, and protocols. Tasks may require the ability to push a cart, extend arms above shoulder height, and be able to visually inspect small parts. Tasks may include working with chemicals (epoxies, adhesives, solvents, etc.) and following rigorous disciplined methodologies and instructions. This is a 1st shift, onsite position. Qualifications You Must Have Typically requires HS diploma (or equivalent, e.g. G.E.D in the US) or vocational/ technical education in related discipline with a minimum of 4 years of relevant experience. Minimum of four years' relevant experience in manufacturing or operations. Experience using general lab equipment like microscopes and small hand-held tools (tweezers, screwdrivers, etc.) U.S. Citizenship status is required, as this position will require the ability to access U.S. only data systems. Qualifications We Prefer Experience using manual or automated wire bonders or tab bonders as well as pull testing equipment. Previous experience working in a cleanroom, around ESD sensitive parts is a plus. Experience with FOD and FOD reduction methods. What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation assistance not provided for this position. Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. The salary range for this role is $31-$35/hour. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
$31-35 hourly Auto-Apply 10d ago
Production Technician I
General Public
Production team member job in Carpinteria, CA
GENERAL PUBLIC, LLC, is a revolutionary art publishing company that utilizes proprietary technology to reproduce fully textured printed artworks that capture the nuances of brushwork and technique. These textured prints are an authentic expression of the artist's hand. At General Public, we believe that great art should be shared and enjoyed by all, and our mission is to make it accessible to everyone. Visit our website at ********************* for more information. We seek an experienced Print Shop Technician to operate our large-format flatbed presses, roll-to-roll inkjet printers, digital cutters, scanners, and associated RIP and control software. You will be responsible for day-to-day print production, equipment maintenance, and general production duties. Previous experience working in a fast-paced digital printing department is strongly desired, but not required. Essential Functions and Responsibilities: Interact with digital large-format presses, roll-to-roll printers, digital cutting and routing equipment, and scanning equipment. Use of PhotoShop, rip, and control software to produce print-ready files Read, comprehend, and produce orders from detailed production orders to meet requested deadlines. Quality assurance. (checking prints for accurate color, texture, size, and general print quality.) Follow standard procedures and operations for the production of printed products. Perform needed maintenance on all production equipment. Maintain a clean and professional production facility at all times. Perform additional duties as assigned. Mandatory Qualifications: A good understanding of digital presses, cutters, scanners, and the accompanying rip (Caldera) and control software. Minimum 1 year of professional experience in the field of large-format digital printing Ability to read, write, and comprehend written materials and instructions. Basic math skills in standard and metric measurements (adding, subtracting, multiplying, and dividing whole numbers and fractions and converting fractions to decimals and vice versa). Preferred Qualifications: Ultimate client satisfaction mentality and approach Ability to communicate with various functional groups Proactive problem-solving and issue identification Exceptional coordination and multi-tasking skills Strong attention to detail Ability to see color accurately Ability to work in a fast-paced team environment Continually improving operator skills and knowledge Basic computer skills MultiCam (or similar) digital cutting experience preferred Physical Requirements: Ability to lift, push, and pull up to 75 lbs. Ability to visually inspect all work for defects and distinguish colors. Frequent reaching, bending, climbing, kneeling, crouching, and stooping. Manual dexterity for repetitive work. Frequent walking and standing. Chemicals: Yes Travel: N/A Location: in person in Carpinteria Pay: $20.00-$30.00 per hour DOE Benefits: 401(k) Dental Insurance Health Insurance Vision Insurance Paid time off Schedule: 8-hour shift Day shift Five days a week (schedule flexibility may be required) Education: High school or equivalent (required) Some post-secondary education (preferred) Experience: Wide Format Printing/Sign Making: 1 year
$20-30 hourly 2d ago
Production Assembler - 2nd Shift
Ensign-Bickford Industries 4.1
Production team member job in Moorpark, CA
This opportunity is located within our Ensign-Bickford Aerospace & Defense Company business, a global leader of mission-critical hardware and systems solutions including precision energetics systems and innovative explosive solutions.Click here to learn more. Job Description There is a position available for 2nd Shift Production Assembler with Ensign-Bickford Aerospace & Defense Company in Moorpark, CA. This is a full-time position. Work Schedule: 9/80 Schedule Monday - Thursday: 3:00 PM - 12:30 AM Friday: 2:00 PM - 10:30 PM (eight-hour shift every other Friday) General Summary: This position will report to the Shop Floor Supervisor and will be responsible for various work assignments throughout the production area. Principal Duties and Responsibilities: Performs manual/mechanized assembly operations. Responsible for adhering to all safety and quality requirements. Process specifications using hand tools, machinery, air presses, jigs and other equipment and tooling. Must be able to follow work instructions. Performs other operations such as loading and unloading components into tooling and powders into cups to press. Able to work independently with minimal supervision. Job Specifications: High school diploma or equivalent required. Must demonstrate ability to setup and monitor equipment through written and verbal instructions. Must be able to read and interpret engineering drawings and blueprints. General knowledge of GD&T, blueprint reading and inspection tools Ability to perform fine mechanical assembly including resistance welding, light machining and electrical testing Defense and Aerospace Industry experience including working knowledge of company product lines a plus Excellent verbal and written communication skills in English. Must be able to effectively communicate with all levels of management. Physical Demands and Work Environment Appropriate safety equipment as required by area. Some of the test and manufacturing areas include exposure to noise and may require hearing protection. Safety training in the handling of pyrotechnic materials is required. The physical activities of this position include work lifting up to 25 pounds occasionally, walking, standing, sitting, reaching, kneeling, repetitive motions, stooping, balancing, pushing, pulling, coordinating, talking and hearing. The physical demands and the work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Ensign-Bickford Aerospace & Defense Company is an Equal Opportunity Employer (EOE). Qualified applicants are considered for employment without regard to race, religion, color, sex, age, disability, sexual orientation, genetic information, national origin, or veteran status. Compensation: Hourly Range: $23.00 - $28.00 per hour. Compensation is determined by the applicant's education, experience, knowledge, skills, abilities, internal equity, and alignment with market data. Ensign-Bickford Aerospace & Defense Company is an Equal Opportunity Employer (EOE). Qualified applicants are considered for employment without regard to race, religion, color, sex, age, disability, sexual orientation, genetic information, national origin, or veteran status.
$23-28 hourly Auto-Apply 60d+ ago
Production Operator
All External Jobs
Production team member job in Oxnard, CA
Fresh-Squeezed Legacy, Bold New Chapter Tropicana Brands Group is a $3B startup aiming to revolutionize the beverage category. Formed in 2022 as a joint venture between PAI Partners and PepsiCo, our portfolio includes iconic brands like Tropicana, Naked, KeVita, Izze, Copella, and Punica. With over 76 years of global leadership in the orange juice category, we're committed to preserving this legacy while driving innovation in other areas. From reimagining orange juice to creating functional smoothies and driving afternoon refreshments, we are striving to become the undisputed global leader in fresh and chilled beverages. Your Next Pour: The Opportunity Tropicana Brands Group is looking for a Production Operator to support our Supply Chain Team. This role will be responsible for activities such as unloading tankers, bins, drums, driving forklifts, pallet jack, floor scrubber, cleaning, sanitation, material handling, ect. Tropicana is looking for a critical thinker with exceptional communication, influencing and relationship management skills who thrives in a fast-paced environment. . Additional responsibilities will include: Operates and monitors machinery used in the production process Verifies conformance to quality standards at all levels ( raw, finished, ingredients, storage, and transportation conditions) Performs autonomous maintenance activities such as preventative maintenance, lubrication, center lining, 5s and defect identification, sources of contamination. ect. Participate in periodical activities such assisting with the cycle counts and physical inventories Performs duties and responsibilities within the guidelines of plant's programs and initiatives (i.e.: SFTPM) All other duties as assigned by managemet The Perfect Blend: Experience · Minimum 1 year of recent work experience in a manufacturing facility, food production preferred Foundational Ingredients: Requirements Must be located in Oxnard, CA surrounding area or willing to relocate for the duration of employment Willingness to be onsite at the manufacturing facility on a full-time basis Must be able to perform physical tasks for the duration of the shift, including standing, walking, bending, reaching, and lifting/moving items weighing 50 pounds or more Must be legally authorized to work in the United States without the need for employer sponsorship now or in the future High School Diploma, GED or equivalent Knowledge of basic math & problem solving Must be able to utilize manufacturing software Ability to operate equipment and machines in an industrial environment Ability to perform work within established guidelines in a safe manner Ability to work independently and in teams Must be able to obtain forklift certification Benefits TBG is pleased to offer you a comprehensive benefits package which includes medical, dental, vision, company provided life, STD and LTD insurance. In addition, you may also elect to participate in voluntary life, accident, hospital, and critical illness coverages. The hourly pay for this position is $24.51.
$24.5 hourly 51d ago
Production Laborer I
Calpipe Industries LLC
Production team member job in Santa Paula, CA
Job Description Production Laborer I M-F 6:00am - 2:30pm $19/hour Who we are Atkore is forging a future where our employees, customers, suppliers, shareholders, and communities are building better together - a future focused on serving the customer and powering and protecting the world. With a global network of manufacturing and distribution facilities, Atkore is a leading provider of electrical, safety and infrastructure solutions. Who we are looking for: We are currently looking for a Production Laborer I to be based out of Santa Paula, CA. Reporting to Production Supervisor, this person will be responsible for performing production work that includes assembling and disassembling parts, inspecting product to ensure quality as well as operating, tending, and cleaning the production area. The ideal candidate will have a one (1) year experience in a manufacturing setting. Experience in lean manufacturing or business system-based company is a plus. What you'll do: Assist with the production line Load and unload parts from machine Feed or place items onto equipment for processing Pull damaged or non-conforming parts off the line Install and uninstall tooling from product Cut and scrape waste material from parts Label, clean, pack or strap and wrap finished goods Must be able to remain in a stationary position during shift Perform Daily 5S in production work area to prevent safety hazards Be able to work with daily production schedule Take instruction from production line coordinator Read and understand the department metrics Knowledge of basic hand power tools Follow all Personal Protective Equipment (PPE) as required Continuously perform all required tasks in a safe manner, adhering to Atkore's established safety rules and procedures Be flexible and willing to adapt to change, be comfortable working in the constant changing environment Assist in meeting performance to meet Safety, Quality, Delivery, Cost and Innovation goals Attend monthly safety trainings, be an active participant in daily safety briefings, and provide feedback to improve safety program. Must embrace and foster an environment that supports our core values of Accountability, Teamwork, Integrity, Respect and Excellence. What you'll bring: One (1) year of production experience in a manufacturing setting Ability to maintain quality, safety, and effective control standards Ability to understand and follow safety procedures Ability to interpret and execute standard works Ability to read, sort, check, county and verify numbers / perform simple arithmetic Ability to detect problems and report information to appropriate personnel Ability to move objects weighing up to 50lbs Ability to multitask in a fast-paced work environment is a must Ability to familiarize and follow the 5S company program Ability to work independently and in a team when necessary. Good attendance and punctuality. Within 3 months, you'll: Complete your Atkore immersion program Understand your team and your role within the team and how it will help delivery Atkore's strategy Understand departmental standard work and Atkore's policies and procedures Understand department metrics Load and unload parts onto machine Cut/scrape waste material from product Install/Uninstall tooling from product Process and pack finished goods to next process Within 6 months, you'll: Ensure parts conform to specifications, by identifying nonconforming parts and pulling off the line Work efficiently as a team within the department to meet the daily target goal To detect problems and report information as necessary Within 12 months, you'll: Ensure full adherence to 5S practices Follow department standard work procedures, continuous quality improvement objectives, and safety and environmental policies. Atkore is a recipient of a Great Place to Work© certification and a Top Workplaces USA award! We're committed to creating an engaged and aligned workforce that drives collaborative culture. Our team strives for breakthrough results, stays focused on being standout leaders, and fully supports decisions of the Company. We consistently live the Atkore mission, strategic priorities, and behaviors, all in a way that's consistent with our core values. Together, we build strong leaders that continually endeavor to move us forward. Join our team and align yourself with an industry leader!
$19 hourly 17d ago
Production Technician - Second Shift
Teledyne 4.0
Production team member job in Goleta, CA
**Be visionary** Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. **Job Description** **Position Summary:** This Production Technician will work the second shift allowing us to take full advantage of additional equipment and process capacity. Under supervision of Detector Packaging Manager, provide microelectronics assembly support to packaging operations. This Production Technician will process, build, bond, transfer, cure, test and package a full series of cameras. They will learn and function in the exact same manner as the first shift currently does. Work environment is cleanroom / lab. This position will be a 2nd Shift position with hours from 03:00 PM to 11:00 PM. This position will train for the first 8-12 weeks on the 1st Shift before transitioning to the 2nd shift. **Primary Duties & Responsibilities:** + Aqueous ultrasonic cleaning operations. + Laser marking, getter welding + Adhesive die bonding + Wirebonding and pull testing + Alignment measurement + Multipart testing + Stereo zoom microscope + Documentation for travelers and WIP tracking + Knowledge of clean room protocol **Job Qualifications:** + Attention to detail + Collaboration and teamwork + Communication skills (oral, written and listening) + Decision-making and problem solving + Initiative and flexibility + Minimum two years' experience in electronics or related field + High school diploma or equivalent **What We Offer** : + Competitive Salary & Benefits Package + Health, Dental, Vision, and Life Insurance from Day 1 + Paid Vacation, Sick Time, and Holidays + 401(k) with Company Match + Employee Stock Purchase Plan + Educational Tuition Reimbursement + Fun Employee Events throughout the year **Applicants must be either a U.S. Citizen, U.S. national, legal permanent resident, asylee, refugee or must be eligible to apply for and obtain the appropriate export control license from the U.S. Departments of State or Commerce.** **Salary Range:** $45,300.00-$60,400.000 **Pay Transparency** The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, local regulations (such as minimum wage), education/training, work experience, key skills, and type of position. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws. You may not realize it, but Teledyne enables many of the products and services you use every day **.** Teledyne provides enabling technologies to sense, transmit and analyze information for industrial growth markets, including aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, energy, medical imaging and pharmaceutical research.
$45.3k-60.4k yearly 60d+ ago
Production Operator - 2 Shift
Lancesoft 4.5
Production team member job in Thousand Oaks, CA
Title: Production Operator - 2 Shift Duration: 04 Months Contract Shift: 02: 00 PM TO 10: 30 PM Pay Range: USD 18/hr. - 20/hr. Operators are responsible for a variety of product assembly, inspection, testing, operation of equipment/tools and material/component processing tasks to meet production schedule requirements to the high-quality standard expected by the client Essential Functions: Safely and efficiently meet all production work requirements assigned, following operating procedures and work instructions. Troubleshoot problems quickly and efficiently, seeking advice where necessary. To produce the highest standard of quality products possible in accordance with the company's ISO 9001: 2015 procedures. Initial testing for product conformity. Participation in and implementation of continuous improvement projects. Assist others to provide an organized and clean workplace including: all areas of the plant, workstations, equipment, walkways, and break rooms using 5S procedures. Visually inspect products throughout the stages of production to identify defective parts, component orientation errors, missing components, or wrong part insertion. Other duties as assigned. Qualifications: High school diploma or GED required. Experience working in a manufacturing or industrial setting preferred. Possess strong organizational skills, a positive attitude and the ability to work well as a team. Ability to read and comprehend written instructions, as well as, comprehend verbal instructions and effectively communicate verbally. Computer Familiarity. Ability to self-start yet take orders as directed. Ability to move and lift up to 25 pounds. Ability to sit or stand as required to perform essential functions. Consistent and punctual attendance required. Must be available to work assigned shifts and required overtime. Desired Skills/Preferred Qualifications • Insulation/Manual coil winding/MCS coil winding experience
$33k-42k yearly est. 7d ago
Production Worker/Vacuum Packer
SBS Acquisition Company LLC
Production team member job in Santa Barbara, CA
· Take product from the bagging table, or from tubs containing retail or hot smoke packs, and place on the vacuum packer. · Ensure packs are straight and in the correct place for sealing. · Take the vacuum-packed product from the other side of the machine and place it on tubs. · Check all packs for proper seal. · Vacuum sealing and labeling food products according to specifications. · Reporting equipment issues or product defects to supervisor. · Maintain clean work environment. · Follow all company safety procedures and requirements. · Comply with all facility GMP rules and policies and all processes and requirements of the Food Safety and Quality Management System as applicable. · Complete other tasks at request of High Care Supervisor. Requirements: Ability to stand for long periods of time Cold environment and repetitive motions Ability to lift up to 30lbs, push up to 60lbs Ability to understand, and follow instructions (verbal and written) Willingness to wear required PPE and follow GMP (Good Manufacturing Practices) Willingness to work flexible shifts, including early mornings, evenings, weekends, or overtime as needed Bi-lingual a plus! Legally authorized to work in the United States
$29k-37k yearly est. 5d ago
Production Assembler
Eleven Recruiting
Production team member job in Simi Valley, CA
Eleven Recruiting is searching for Production Assemblers to perform a variety of routine mechanical and/or electromechanical assembly operations. Job Core Responsibilities Performs a variety of routine mechanical and/or electromechanical assembly operations by company instructions and procedures Conducts inspections of own and /or other associate's work to ensure correctness by company and /or customer drawing Applies process specifications governing the production of product within an assigned cell, records production time and quantity data Support with simple welding, brazing, or soldering tasks and may operate light machinery such as sandblaster, or electro-etching processing Job Specifications Education: High School Diploma Years Experience: 2-5 years of relevant experience Skills: Skilled at routine mechanical and/or electromechanical assembly operations Able to operate a variety of hand tools and machinery Ability to read and interpret company documents, such as safety rules, operating/manufacturing instructions, policies, and procedures Good manual dexterity is required to work with small parts Capable of recognizing and solving typical problems that can occur in own work area; evaluates and selects solutions from established options Effective oral written and interpersonal skills #LI-BP1 #LI-Onsite Seniority Level: Entry level Salary: $45,000 Job Function: Assembler Industry: Aerospace Employment Type: Full-Time Location: Simi Valley, CA
$45k yearly 60d+ ago
Production Operator - Aerospace Paint Department
Pirate Staffing
Production team member job in Santa Clarita, CA
We are seeking a dedicated and detail-oriented Production Operator to join our Aerospace Paint Department. This full-time role involves preparing, mixing, applying, and finishing aerospace-grade coatings on various components in accordance with strict industry standards and specifications. The ideal candidate will have experience in industrial painting or coatings, strong attention to detail, and a commitment to quality and safety in a controlled manufacturing environment. Key Responsibilities: Surface Preparation: Clean, sand, and prepare surfaces to ensure proper adhesion of aerospace coatings. Mask and unmask components as required, following specifications and blueprints. Paint Mixing & Application: Accurately mix paint systems per technical data sheets and work instructions. Apply primer, topcoat, and specialty coatings using spray guns or other application tools. Quality Control: Inspect parts visually and with measuring tools to ensure coating thickness, color, and finish meet aerospace standards. Document process steps and inspection results according to internal procedures and customer requirements. Equipment Operation: Operate spray booths, curing ovens, and other related paint application equipment. Perform basic equipment maintenance and ensure cleanliness of the work area. Process Documentation: Maintain accurate production records and batch documentation in compliance with industry regulations. Follow written work instructions, standard operating procedures (SOPs), and safety protocols. Safety Compliance Adhere strictly to safety guidelines, including handling hazardous materials and wearing proper PPE. Work in accordance with OSHA, environmental, and aerospace industry standards. Team Collaboration: Work closely with quality inspectors, supervisors, and team members to ensure on-time delivery and high-quality output. Communicate any defects, issues, or process improvements proactively.
$34k-45k yearly est. 16d ago
Production Support Operator
Lamsco West
Production team member job in Santa Clarita, CA
A Production Support Operator will perform a variety of production support functions including cleaning parts, part marking, packaging, deburring and/or grinding parts, operating a tumbler and a sand blaster. The stock material may consist of aluminum, stainless steel, polyimide or phenolic, fiber glass, composite material, titanium, brass, and copper. Main Duties and Responsibilities: · In accordance with instructions on Manufacturing Plan, will clean parts, perform part marking and packaging, deburr and/or grind parts using file, grinding wheel, tumbler and deburring cloth. · Must be able to get along well with others. · Must be able to work scheduled shift and meet company attendance requirements; must be flexible enough to stay late or modify work hours on short notice, if production deadlines require it. · Must be able to perform the job safely; must comply with company safety rules and procedures. Must follow the lean philosophy and practice the 6 S's on a daily basis Additional Duties, as assigned. Requirements: Any combination of education and experience providing the required skill and knowledge for successful job performance will be considered. Typical qualifications would be: · Have good basic math skills (addition, subtraction, multiplication and division using whole numbers, common fractions and decimals). Have good verbal and written English communication skills; ability to work from written and verbal instructions. Ability to use micrometers and calipers. Ability to input data into a computer terminal. Have neat penmanship for completing Manufacturing Plans, etc. High school diploma or GED preferred; prefer one to three months experience in a manufacturing environment. Ability to be detail oriented and able to multi-task several functions. Ability to organize work to optimize efficiency. Additional Requirements: Ability to perform shop math calculations and follow instructions on manufacturing plans. Manual dexterity to perform job functions within established time frame. Correctable vision and hearing. Ability to sit, walk, bend waist and neck, squat, twist neck and waist, use hands to grasp, manipulate, push, pull, reach, twist, turn; ability to stand up to 75% of the day; ability to lift up to 35 lbs. (individually) for 8-10 hours a day. Must be able to maneuver successfully through a 75,000 square foot, two story manufacturing facility. Must be able to work in/around solvents and dust
$34k-45k yearly est. 22d ago
Production Technician II
Aerovironment 4.6
Production team member job in Simi Valley, CA
The primary responsibility of the Production Technician II will be to test/assemble Small Unmanned Arial System products in our manufacturing facility following released engineering drawings and assembly instructions using our work order system. Position Responsibilities * Primary duty is the mechanical assembly of subassemblies using small hand and/or power tools. Some soldering may be required * Final assembly of ground control equipment and air vehicles * Testing and troubleshooting of subassemblies and final assemblies * Works with other Production Technicians and Engineering to correct and improve upon any documents related to the assembly process at the required high quality standard * Works with manufacturing engineers to improve assembly efficiency, improve product quality, reduce manufacturing costs and validate released assembly/ fabrication documentation * Responsible for ensuring that work order protocols are followed and that work order paperwork is completed as the work is performed * May also train other technicians to build a product or follow an established assembly process * May conduct in-process quality checks to ensure that items built are to established high quality standards * Follows established procedures on routine work and may require instruction on new assignments * Maintains a clean and safe work environment * Other duties as assigned Basic Qualifications (Required Skills & Experience) * High School diploma or GED equivalent is required or equivalent combination of education, training, and experience * Minimum of 1 - 2 years of experience in a manufacturing or production environment in either electronics or electro-mechanical assembly and test or equivalent combination of education, training, and experience * Experience with hand tools, including crimpers, drills, taps, torque wrenches, power tools and air tools is required * Ability to read blueprints and schematics is desired * Ability to solder as part of assembly function and duties * Must have good manual dexterity and basic computer operation skills * Must have strong oral and written communication skills to communicate effectively with employees in the Company * Strong analytical, problem-solving skills and attention to detail with ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form Other Qualifications & Desired Competencies * Vocational training in Electronics or Solder Certification is preferred * Versed in Lean Manufacturing methodologies is desired * Familiarity with Safety and ESD practices is desired * Work with engineering on new product development efforts where documentation and assembly instructions are not yet finalized * Applies acquired job skills, company policies and procedures to complete assigned tasks under minimal supervision * Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties * Displays strong initiative and drive to accomplish goals and meet company objectives * Takes ownership and responsibility for current and past work products * Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company * Focuses on teamwork, collaboration and puts the success of the team above one's own interests Physical Demands * Ability to work in a manufacturing environment * Ability to frequently use hand tools (e.g. clamps) using light, minimal force * Regularly required to sit for long periods and occasionally stand for short periods * Frequently lift and/or carry objects of small size between 2lbs and 5lbs * Frequently required to use hand to finger, handle, or feel objects, tools, or controls and balance * Occasionally required to walk * Occasionally required to reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear * Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus Clearance Level Clearance Level The salary range for this role is: $17 - $24 AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: This position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A "U.S. person" according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR U.S. Citizenship required
$17-24 hourly Auto-Apply 16d ago
Production Worker 3
RTX Corporation
Production team member job in Goleta, CA
**Country:** United States of America ** Onsite **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. **Security Clearance Type:** None/Not Required **Security Clearance Status:** Not Required At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. We have an opening for a Production Worker 3 in our Class 7 Clean Room Facility in Goleta, California, that is involved in the packaging of IR detectors for high-reliability space, military, and commercial applications. We need a skilled electro-mechanical technician in support of a variety of program processes as assigned by management. The selected candidate will be working with critical dewars and subassemblies. **What You Will Do** + Must be able to work extended periods of time in an environmentally controlled area (cleanroom). + Technicians are required to communicate in English and must be able to understand written and verbal instructions in English. + The ability to use a computer to access work instructions, perform data entry, and complete on-line training is required. + You must wear company provided Personal Protective Equipment (PPE) and strictly follow all safety-related processes, procedures, and protocols. + Tasks may require the ability to push a cart, extend arms above shoulder height, and be able to visually inspect small parts. + Tasks may include working with chemicals (epoxies, adhesives, solvents, etc.) and following rigorous disciplined methodologies and instructions. + This is a 1st shift, onsite position. **Qualifications You Must Have** + Typically requires HS diploma (or equivalent, e.g. G.E.D in the US) or vocational/ technical education in related discipline with a minimum of 2 years of relevant experience. + Minimum of two years relevant experience in manufacturing or operations. + Experience using general lab equipment like microscopes and small hand-held tools (tweezers, screwdrivers, etc.) + U.S. Citizenship status is required, as this position will require the ability to access U.S. only data systems. **Qualifications We Prefer** + Previous experience working in a cleanroom, around ESD sensitive parts is a plus. + Experience with FOD and FOD reduction methods. **What We Offer** Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. **_Relocation assistance not provided for this position._** **Learn More & Apply Now!** Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. _The salary range for this role is $27-$32/hour. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills._ **_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._** Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.
$27-32 hourly 9d ago
Production Assembler
Ensign-Bickford Industries 4.1
Production team member job in Moorpark, CA
This opportunity is located within our Ensign-Bickford Aerospace & Defense Company business, a global leader of mission-critical hardware and systems solutions including precision energetics systems and innovative explosive solutions.Click here to learn more. Job Description There is a position available for a Production Assembler with Ensign-Bickford Aerospace & Defense Company in Moorpark, CA. This is a full-time position. General Summary: This position will report to the Shop Floor Supervisor and will be responsible for various work assignments throughout the production area. Principal Duties and Responsibilities: Performs manual/mechanized assembly operations. Responsible for adhering to all safety and quality requirements. Process specifications using hand tools, machinery, air presses, jigs and other equipment and tooling. Must be able to follow work instructions. Performs other operations such as loading and unloading components into tooling and powders into cups to press. Job Specifications: High school diploma or equivalent required. Must demonstrate ability to setup and monitor equipment through written and verbal instructions. Minimum 2 years manufacturing related experience with ability to use and read accurately various measuring instruments. Ability to perform fine mechanical assembly including resistance welding, light machining and electrical testing Certified soldering skills per J-STD/NASA a plus. Defense and Aerospace Industry experience including working knowledge of company product lines a plus Excellent verbal and written communication skills in English. Must be able to effectively communicate with all levels of management. Physical Demands and Work Environment Appropriate safety equipment as required by area. Some of the test and manufacturing areas include exposure to noise and may require hearing protection. Safety training in the handling of pyrotechnic materials is required. The physical activities of this position include work lifting up to 25 pounds occasionally, walking, standing, sitting, reaching, kneeling, repetitive motions, stooping, balancing, pushing, pulling, coordinating, talking and hearing. The physical demands and the work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Ensign-Bickford Aerospace & Defense Company is an Equal Opportunity Employer (EOE). Qualified applicants are considered for employment without regard to race, religion, color, sex, age, disability, sexual orientation, genetic information, national origin, or veteran status. Compensation: Hourly Range: $23.00 - $28.00 per hour. Compensation is determined by the applicant's education, experience, knowledge, skills, abilities, internal equity, and alignment with market data. Ensign-Bickford Aerospace & Defense Company is an Equal Opportunity Employer (EOE). Qualified applicants are considered for employment without regard to race, religion, color, sex, age, disability, sexual orientation, genetic information, national origin, or veteran status.
$23-28 hourly Auto-Apply 60d+ ago
FPA Production Worker S4- 2nd Shift
RTX
Production team member job in Goleta, CA
Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance Type: None/Not Required Security Clearance Status: Not Required At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. A Production Worker S4 (Production Specialist) in the FPA area, operates equipment and performs processes to build hardware. Utilizes their advanced processing experience to trouble shoot and resolve issues with production support teams. Works closely with area leads to optimize area efficiency. Rigorously documents processes performed in electronic tracking systems. Executes tasks to ensure that equipment and processes being used are in control. May assist in outlining tasks and checking other's work for correctness. Routine work is performed without supervision. This is a 100% onsite position. **2nd Shift: 2PM - 10:30PM and negotiable in Goleta, California. This is an onsite position. Responsibilities to Anticipate: Active participation in a Safety-First work environment. The ability to work in a class 100 cleanroom, in a full bunny suit, under yellow lights is required. Process Focal Plane Arrays (Hybridize, Wet Etch, Photomask, Fixturing, Hotplate processing, Surface treatment, Wire bond, Metrology, inspection etc.) to build hardware. Handle fragile hardware and manipulate small parts during processing. Rigorously follow written procedures and work instructions Document data on travelers and in the electronic database Utilize strong interpersonal communication skills with peers, leads, support teams and management. Cross train as necessary to improve area efficiency Execute specialized communications (pass downs) if operating during 2nd or 3rd shift hours. Basic Qualifications: High School Diploma or GED US Citizenship Minimum 4 years of production experience in cleanroom fabrication, assembly, manufacturing or equivalent. Has experience in MS Office (Excel) Preferred Qualifications: More than 4 years of production experience in cleanroom fabrication, assembly, manufacturing or equivalent. Experience in Hybridization, Thin Film Deposition, Photolithography, Wet Etch, or other cleanroom Focal Plane Array, fabrication work cells. Ability to work safely with chemicals and raw production materials. Ability to multitask. The flexibility to work occasional, voluntary overtime on weekends to meet the factory's needs is strongly desired. What We Offer: Whether you're just starting out on your career journey or are an experienced professional, we offer a total rewards package that goes above and beyond with compensation; healthcare, wellness, retirement and work/life benefits; career development and recognition programs. Some of the benefits we offer include parental (including paternal) leave, flexible work schedules, achievement awards, educational assistance and child/adult backup care. Additional Information: The salary range for this role is Goleta Ca, Zone 2 $30.35- $41.06; however, Raytheon considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate's work experience, location, education/training, and key skills. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms
$29k-37k yearly est. Auto-Apply 3d ago
Production Operator - Plastic Manufacturing
Pirate Staffing
Production team member job in Santa Clarita, CA
We are seeking a reliable and detail-oriented Production Operator to join our plastic manufacturing team. In this full-time role, you will be responsible for operating machines, monitoring production lines, and ensuring that plastic parts and products are manufactured to quality standards. This is a hands-on position ideal for someone who thrives in a fast-paced, team-driven manufacturing environment. Machine Operation Set up and operate plastic molding, extrusion, or thermoforming machines based on production requirements. Monitor machines during operation to detect mechanical or processing issues. Adjust machine settings as needed to maintain product quality and consistency. Production Monitoring Inspect plastic products for defects, proper shape, color, and dimensions. Remove and dispose of defective items according to company procedures. Record production data including quantities produced, machine downtime, and materials used. Material Handling Load raw plastic materials (pellets, resins, additives) into machines. Safely transport materials and finished goods within the facility. Maintain clean and organized workspaces and production lines. Quality Control Use basic measuring tools (calipers, gauges, rulers) to check product specifications. Follow production checklists and quality guidelines to ensure compliance. Report quality issues to the supervisor or quality control team. Safety & Maintenance Follow all safety procedures, including proper use of PPE and machine lockout/tagout protocols. Perform routine cleaning and basic maintenance on equipment. Report any equipment malfunctions or hazards immediately. Team Collaboration Work cooperatively with other team members, supervisors, and maintenance personnel. Communicate issues or suggestions for improving productivity and safety.
$34k-45k yearly est. 60d+ ago
Production Technician II
Aerovironment 4.6
Production team member job in Simi Valley, CA
The primary responsibility of the Production Technician II will be to test/assemble Small Unmanned Arial System products in our manufacturing facility following released engineering drawings and assembly instructions using our work order system. Position Responsibilities * Primary duty is the mechanical assembly of subassemblies using small hand and/or power tools. Some soldering may be required * Final assembly of ground control equipment and air vehicles * Testing and troubleshooting of subassemblies and final assemblies * Works with other Production Technicians and Engineering to correct and improve upon any documents related to the assembly process at the required high quality standard * Works with manufacturing engineers to improve assembly efficiency, improve product quality, reduce manufacturing costs and validate released assembly/ fabrication documentation * Responsible for ensuring that work order protocols are followed and that work order paperwork is completed as the work is performed * May also train other technicians to build a product or follow an established assembly process * May conduct in-process quality checks to ensure that items built are to established high quality standards * Follows established procedures on routine work and may require instruction on new assignments * Maintains a clean and safe work environment * Other duties as assigned Basic Qualifications (Required Skills & Experience) * High School diploma or GED equivalent is required or equivalent combination of education, training, and experience * Minimum of 1 - 2 years of experience in a manufacturing or production environment in either electronics or electro-mechanical assembly and test or equivalent combination of education, training, and experience * Experience with hand tools, including crimpers, drills, taps, torque wrenches, power tools and air tools is required * Ability to read blueprints and schematics is desired * Ability to solder as part of assembly function and duties * Must have good manual dexterity and basic computer operation skills * Must have strong oral and written communication skills to communicate effectively with employees in the Company * Strong analytical, problem-solving skills and attention to detail with ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form Other Qualifications & Desired Competencies * Vocational training in Electronics or Solder Certification is preferred * Versed in Lean Manufacturing methodologies is desired * Familiarity with Safety and ESD practices is desired * Work with engineering on new product development efforts where documentation and assembly instructions are not yet finalized * Applies acquired job skills, company policies and procedures to complete assigned tasks under minimal supervision * Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties * Displays strong initiative and drive to accomplish goals and meet company objectives * Takes ownership and responsibility for current and past work products * Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company * Focuses on teamwork, collaboration and puts the success of the team above one's own interests Physical Demands * Ability to work in a manufacturing environment * Ability to frequently use hand tools (e.g. clamps) using light, minimal force * Regularly required to sit for long periods and occasionally stand for short periods * Frequently lift and/or carry objects of small size between 2lbs and 5lbs * Frequently required to use hand to finger, handle, or feel objects, tools, or controls and balance * Occasionally required to walk * Occasionally required to reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear * Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus Clearance Level No Clearance The salary range for this role is: $17 - $24 AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: This position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A "U.S. person" according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR
$17-24 hourly Auto-Apply 7d ago

Learn more about production team member jobs

How much does a production team member earn in San Buenaventura, CA?

The average production team member in San Buenaventura, CA earns between $21,000 and $37,000 annually. This compares to the national average production team member range of $22,000 to $37,000.

Average production team member salary in San Buenaventura, CA

$28,000

$21,00010%

$28,000Median

$37,00090%

Job type you want

Full Time

Part Time

Internship

Temporary

Zippia Careers
Production and Manufacturing Industry
Production Team Member Jobs
Locations
San Buenaventura, CA
Production Team Member San Buenaventura, CA Jobs

Production team member jobs in San Buenaventura, CA - 129 jobs

Production Technician II

Production Operator

Production Worker 4

Production Worker 4

Production Technician I

Production Assembler - 2nd Shift

Production Operator

Production Laborer I

Production Technician - Second Shift

Production Operator - 2 Shift

Production Worker/Vacuum Packer

Production Assembler

Production Operator - Aerospace Paint Department

Production Support Operator

Production Technician II

Production Worker 3

Production Assembler

FPA Production Worker S4- 2nd Shift

Production Operator - Plastic Manufacturing

Production Technician II

Learn more about production team member jobs

How much does a production team member earn in San Buenaventura, CA?