Production team member jobs in Tampa, FL - 373 jobs

Requirements Machine and Tools Used Ability to use and understand air tools Ability to use sockets and wrenches Box Taping Machine Language Skills: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Problem Solving Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Working Hours: Hours will be 7:00 AM to 4:00 PM Monday through Friday Working Conditions/Physical Demands of the Job: Warehouse/Production: The work environment characteristics described here are representative of those typical in a warehouse environment. The noise level in the work environment is usually moderate to loud, including the sounds of forklifts and tools. The temperature in the warehouse is moderate to hot depending on the time of the year. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands and fingers to handle or feel; and reach with hands and arms. The employee must frequently lift and/or move up to 50 pounds. *Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

As an Associate Assembler at GE Aviation Systems LLC, you will be responsible for the assembly of aircraft components and systems following established procedures and quality standards. This role operates on the 2nd shift, contributing to the timely production of high-quality aerospace parts. Job Responsibilities * Perform assembly operations on various aircraft components and sub-assemblies according to blueprints, work instructions, and engineering specifications. * Utilize hand tools, power tools, and specialized equipment to assemble parts with precision and accuracy. * Inspect assembled components for defects, ensuring compliance with quality standards and specifications. * Complete necessary documentation, including work orders, inspection reports, and production logs. * Adhere to all safety protocols and company policies to maintain a safe working environment. * Collaborate with team members and supervisors to troubleshoot issues and optimize assembly processes. * Maintain a clean and organized work area. * Participate in continuous improvement initiatives and training programs. Job Qualifications * High School Diploma or GED equivalent. * Previous experience in manufacturing or assembly preferred, ideally in an aerospace or precision manufacturing environment. * Ability to read and interpret blueprints, schematics, and work instructions. * Strong attention to detail and manual dexterity. * Basic understanding of quality control principles. * Ability to work effectively in a team-oriented manufacturing environment. * Must be able to work the 2nd shift (typically afternoon/evening hours). * Physical ability to stand for extended periods, lift up to 30 pounds, and perform repetitive tasks. * Basic computer skills for data entry and documentation. Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No

Company: AkzoNobel About AkzoNobel Since 1792, we've been supplying the innovative paints and coatings that help to color people's lives and protect what matters most. Our world class portfolio of brands - including Dulux, International, Sikkens and Interpon - is trusted by customers around the globe. We're active in more than 150 countries and use our expertise to sustain and enhance the fabric of everyday life. Because we believe every surface is an opportunity. It's what you'd expect from a pioneering and long-established paints company that's dedicated to providing sustainable solutions and preserving the best of what we have today - while creating an even better tomorrow. Let's paint the future together. For more information please visit ***************** 2024 Akzo Nobel N.V. All rights reserved. Job Purpose Executes assigned production tasks in accordance with procedures, to ensure right levels of HSE, Quality, Service and costs. Key Responsibilities * Performs daily tasks, processes data collection and administration tasks as per procedures and control systems. * Reports safety, quality, or other issues related to products or warehouse processes to the Team Leader / Warehouse Supervisor / Warehouse Manager. * Ensures all warehouse targets are met while ensuring the appropriate quality standards are maintained. * Use SAP to keep warehouse inventory updated and accurate. * Provide updates by email and SAP reports to the management team. * Appropriately addresses human resources issues, such as attendance or discipline * Advises/trains employees on care and preservation of items received, stored, and shipped * Supervise employees to ensure breaks and lunches are taken at the required time * Responsibilities include positively training and coaching employees positively * Ensure orders are picked, checked, and packed accurately and in a timely fashion * Perform inventory counts as directed and make adjustments when needed and authorized * Monitor compliance with safety and security procedures * Attend meetings, workshops, and training as directed * Ensure HSE training and responsibilities are completed as expected * Delegate warehouse housekeeping duties and ensure they are performed daily * Maintain compliance in all areas pertaining to Federal and State regulatory agencies * Proficiently use SAP to ship, receive, and monitor inventory transactions * Implement and maintain operational discipline throughout operations within the team * Coordinate and assign priorities and tasks to operators and ensure completion * Actively engage the team in HSE participation and ALPS improvements Job Requirements * Ability to read, comprehend, and follow safety instructions and safety guidelines * Ability to pass the forklift test and obtain forklift certification * Ability to operate a forklift, following all operating instructions effectively and efficiently * Ability to read and apply accurate labels * Ability to measure and weigh accurately * Ability to lift and handle containers such as 5-gallon pails up to 75 lbs, 60 lb bags of pigment or maneuvering drums up to 600 lbs * Must have effective interpersonal skills * High School Diploma * Prior experience working in a paint manufacturing facility is preferred * Prior manufacturing experience * English Speaking * Microsoft basic skills preferred Total Compensation * The hourly range for these skills is: $18.50/hr. + 3% Annual Bonus * 401 (k) retirement savings with 6% company match * Medical insurance with HSA * Dental, Vision, Life, and AD&D benefits * Generous vacation, sick, and holiday pay * Progression (pay-for-skill) pay plans. * Short- & Long-term disability * Paid Parental leave. * Career growth opportunities * Active Diversity & Inclusion Networks * Employee referral plan * Employee appreciation days At AkzoNobel we are highly committed to ensuring an inclusive and respectful workplace where all employees can be their best self. We strive to embrace diversity in a context of tolerance. Our talent acquisition process plays an integral part in this journey, as setting the foundations for a diverse environment. For this reason we train and educate on the implications of our Unconscious Bias in order for our TA and hiring managers to be mindful of them and take corrective actions when applicable. In our organization, all qualified applicants receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age or disability. #LI-HE1 REQ ID# 51028

Since 1869 we've connected people through food they love. Our history was created by remarkable people, ideas, and innovations. It serves as inspiration and foundation for our future success. We're proud to be stewards of amazing brands that people trust. Our portfolio includes the iconic Campbell's brand, as well as Michael Angelo's, Pace, Pacific Foods, Prego, Rao's Homemade, Swanson, and V8. In our Snacks division, we have brands like Cape Cod, Goldfish, Kettle Brand, Lance, Late July, Pepperidge Farm, Snack Factory, and Snyder's of Hanover. We foster a culture of belonging where people come first, and diversity is embraced. And we live our values, always, while setting the highest standards for performance. Here, you will make a difference every day. You will be part of a dynamic, collaborative, and competitive team. You will be supported to build a rewarding career with opportunities to grow, innovate and inspire. Make history with us. Job Description: Following established procedures and working under supervision, perform a variety of job duties in the packaging. Heavy lifting may be required. Must be able to work on short notice. Must maintain accurate records. Perform other duties as assigned by supervisor. Work Conditions: 1) 12 Hour shift. Overtime is required. 2) Environment - Noise levels will be minimal to moderate. Temperature will range from controlled to very warm. Lighting is sufficient. There is a possibility of slippery footing from wet and dry ingredients. Individual base pay depends on work location and additional factors such as experience, job-related skills, and relevant education or training. Total pay may include other forms of compensation. In addition, we offer competitive health, dental, 401k and wellness benefits beginning on the first day of employment. Please ask your Talent Acquisition Partner for more information about our total rewards package. The Company is committed to providing equal opportunity for employees and qualified applicants in all aspects of the employment relationship, including consideration for employment, without regard to race, color, sex, sexual orientation, gender identity, national origin, citizenship, marital status, protected veteran status, disability, age, religion, or any other classification protected by law.

**B Shift:** Monday-Friday, 1pm-9pm **_What Assembly contributes to Cardinal Health_** Manufacturing is responsible for cost of production and maintenance activities including process improvement, supply chain management, quality assurance, employee safety and engagement, and environmental commitment. Performs a variety of tasks ranging from repetitive to non-repetitive production to put together component parts to make assemblies, sub-assemblies or completed units, using standard operating procedures. May conduct quality inspections on processing line in accordance with quality specifications. **_Job Summary_** The Associate II, Assembly plays a key role in the manufacturing process of Cardinal Health medical products. The Associate II, Assembly operates multiple machines at once and performs routine inspections of manufactured products in accordance with quality specifications. This job reports defects and works with the quality team to investigate and identify route causes. This job ensures that manufactured parts are captured in bins and prepared for transport. The Associate II, Assembly tasks are performed in accordance with applicable safety guidelines, as well as appropriate processing standards. **_Responsibilities_** + Sets up and operates production equipment in accordance with current manufacturing practices and standard operating procedures. + Measures and records data associated with operating and manufacturing equipment. + Verifies outputs in the manufacturing process and ensures that quality and quantity standards are met. + Inspects components for debris, and or any other potential quality defect and reports defects as needed to management and the quality team. + Performs duties in compliance with all safety rules and regulations required by the Company, Local, and State and Federal provisions. **_Qualifications_** + 1-2 years of experience preferred + High school degree or GED preferred **_What is expected of you and others at this level_** + Applies acquired knowledge and skills to complete standard tasks + Readily learns and applies new information and methods to work in assigned area + Maintains appropriate licenses, training and certifications + Works on routine assignments that require some problem resolution + Works within clearly defined standard operating procedures and/or scientific methods + Adheres to all quality guidelines + Works under moderate degree of supervision + Work typically involves regular review of output by work lead or supervisor + Refers complex unusual problems to supervisor **Pay rate:** $16.45 per hour (includes shift differential) **Bonus eligible:** No **Benefits:** Cardinal Health offers a wide variety of benefits and programs to support health and well-being. + Medical, dental and vision coverage + Paid time off plan + Health savings account (HSA) + 401k savings plan + Access to wages before pay day with my FlexPay + Flexible spending accounts (FSAs) + Short- and long-term disability coverage + Work-Life resources + Paid parental leave + Healthy lifestyle programs **Application window anticipated to close:** 02/06/2026 *if interested in opportunity, please submit application as soon as possible. _Candidates who are back-to-work, people with disabilities, without a college degree, and Veterans are encouraged to apply._ _Cardinal Health supports an inclusive workplace that values diversity of thought, experience and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. Cardinal Health is an Equal_ _Opportunity/Affirmative_ _Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law._ _To read and review this privacy notice click_ here (***************************************************************************************************************************

Job DescriptionJoin Our Team as a Machine Operator! Are you interested in joining one of Tampa Bay's Top Workplaces (for 12 years running!) that provides on-the-job training and a fun, high-energy atmosphere? If you said yes, then look no further!!!! About Our Company Founded in 1998, PostcardMania is all about making small business marketing better, smarter, and a whole lot more fun! We're proud to be one of Tampa Bay's Top 100 Workplaces, and as an Inc. 500 marketing powerhouse, we've built a team of over 350 amazing people and continue to expand our impact. When entrepreneurs want to see real results, they turn to us! Your Mission You will play a key role in our production process by operating either mailing equipment or bindery machinery, depending on daily needs. In the mailing role, you'll run the mailing machine to ensure postcards and other mailings are processed accurately, kept in proper zip code order, and delivered to the Post Office on time, while also handling mailing paperwork and order materials. In the bindery role, you'll operate folder, inserter, or other bindery equipment, organize and maintain postcard inventory in shelving units, and support overall production flow. In both areas, you'll collaborate with teammates and assist other operators as needed to keep things running smoothly. Schedule Monday through Friday. Hours vary depending on which machine you would be working. 7a-4p OR 9a-6p Compensation Starting at $16/hour Requirements Ability to lift up to 50 lbs repeatedly and remain on your feet for most of the workday Strong attention to detail with a high level of quality control Comfortable working in a fast-paced environment and meeting deadlines Basic computer skills, including Word, Excel, and Outlook Willingness to learn and safely operate equipment such as forklifts and pallet jacks (training provided) Positive, team-oriented attitude with strong communication skills High level of responsibility, reliability, and work ethic Desire to grow with the company and be part of a collaborative team Benefits Medical, Dental, Vision & Life Insurance 401K, Short- and Long-Term Disability, Accident & Critical Illness Paid vacation time that increases with longevity 6 paid holidays (New Year's Day, Memorial Day, Fourth of July, Labor Day, Thanksgiving, and Christmas) Free yoga on-site twice a week Free monthly visits to a local chiropractor and so much more!

The Production Technician is responsible for safely handling customer's cylinders in compliance with standard operating procedures. This position reports directly to the Area Lead and Plant/Department Manager. Training is provided to ensure complete understanding of position and department responsibilities. Essential Functions Understands hazards of various gases and size and contents of cylinders. Properly perform inspections of cylinders. Properly and safely handle cylinders. Required for All Jobs Performs other duties as assigned Complies with all policies and standards Work Experience - 0-1 years - High School Diploma/GED Knowledge, Skills and Abilities Strong level of attention to detail. Basic computer skills. Ability to read and comprehend English. Ability to work independently and under some pressure to meet deadlines. Must be able to read and write and perform mathematical exercises. Must be able to work with a wide variety of people with different personalities Able to work extended shifts and/or weekends Physical Demands/Working Conditions Able to work in a non-climate controlled environment. Must be able to roll or lift 75 lb cylinders. Able to stand for extended periods of time Physical Demands A thorough completion of this section is needed for compliance with legal standards such as the Americans with Disabilities Act. The physical requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Travel Requirements - None Mental Demands Math - Frequently Reading Comprehension - Constantly Safety Awareness - Constantly PHYSICAL DEMANDS/WORKING CONDITIONS Stationary Position - Frequently Move/Traverse - Frequently Stationary Position/Seated - Rarely Transport/Lifting - Frequently 50 lbs Transport/Carrying - Frequently 50 lbs Exerting Force/Pushing - Frequently 200 lbs Exerting Force/Pulling - Rarely 200 lbs Ascend/Descend - Occasionally Balancing - Frequently Position Self/Stooping - Frequently Position Self/Kneeling - Frequently Position Self/Crouching -Occasionally Position Self/Crawling - Rarely Reaching - Rarely Handling - Constantly Grasping - Constantly Feeling - Constantly Communicate/Talking -Frequently Communicate/Hearing -Frequently Repetitive Motions - Constantly Coordination - Constantly Matheson is an Equal Opportunity Employer that complies with the laws and regulations set forth under EEOC. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. EOE AA M/F/VET/Disability

GENERAL PURPOSE This position is responsible for properly recognize the correct linen belonging to the account being processed. You must ensure there is no mixed, dirty, or damaged linen before feeding into the machine or hand-folding it. You must maintain a fast pace speed meeting company's expectations while practicing safety procedures. In addition, the Production Operators will help on making sure the machinery is working properly, by communicating with their leaders of any issues. DUTIES AND RESPONSIBILITIES Feeding machinery with sheets, Duvets, bathrobes pillowcases, towels, tablecloths napkins, mats Responsible for maintaining a clean and organized working station. Ensure the linen being process belongs to the account assigned. Identify any damaged, dirty, or mixed linen and properly place it in the correct containers. Maintain an average of 85% or above for production based on the IT system in place. (Spindle) Must be logged into the IT system in place. (Spindle) always while working on the machine. Will be required to perform other duties as requested, directed, or assigned. Qualifications QUALIFICATIONS High school diploma or equivalent preferred but not required. 3 months or more related experience in a commercial laundry or hotel industry. Ability to understand, comprehend, and follow simple instructions, short correspondence, and product labeling. Ability to add and subtract two-digit numbers. Able to work in a fast-paced environment. Ability to meet required performance goals and objectives. Ability to work in a team environment and alone. Good communications, both orally and written in English. Must have good attention to detail. APPLICABLE WORKING CONDITIONS WORKING CONDITIONS AMOUNT OF TIME TYPICALLY SPENT ON ACTIVITY Inside work: protected from weather conditions FREQUENTLY OCCASIONALLY RARELY NEVER Outside work: no effective protection from weather FREQUENTLY OCCASIONALLY RARELY NEVER Both inside and outside work: activities occur both inside and outside an office enclosure FREQUENTLY OCCASIONALLY RARELY NEVER Extreme cold: below 32 degrees for periods of more than 1 hour throughout the normal course of a day FREQUENTLY OCCASIONALLY RARELY NEVER Extreme heat: above 100 degrees for periods of more than 1 hour throughout the normal course of a day FREQUENTLY OCCASIONALLY RARELY NEVER Noise: employees must shout to be heard over ambient noise level (hearing protection required) FREQUENTLY OCCASIONALLY RARELY NEVER Vibration: exposure to oscillating movements of extremities or whole body FREQUENTLY OCCASIONALLY RARELY NEVER Potential hazards: moving parts, electricity, gas, scaffolding, chemicals, etc. FREQUENTLY OCCASIONALLY RARELY NEVER Terminal viewing: extended viewing of screens FREQUENTLY OCCASIONALLY RARELY NEVER Atmospheric conditions (in non-confined spaces): fumes, odors, mists, gases, poor ventilation, etc. FREQUENTLY OCCASIONALLY RARELY NEVER Oils: air and/or skin exposure to oils and other cutting fluids FREQUENTLY OCCASIONALLY RARELY NEVER Respirator: use of a respirator is required FREQUENTLY OCCASIONALLY RARELY NEVER Physical stamina: due to emergency or workload demands, subject to extended work hours requiring stamina beyond normal demands or levels FREQUENTLY OCCASIONALLY RARELY NEVER None: employee is NOT substantially exposed to adverse environmental conditions (work occurs in typical indoors, office or administrative environment) FREQUENTLY OCCASIONALLY RARELY NEVER ESSENTIAL ABILITIES AND FUNCTIONS ACTIVITY FUNCTION AMOUNT OF TIME TYPICALLY SPENT ON ACTIVITY Essential Non-Essential Rarely Occasionally Frequently Standing (on a hard surface) X X Stairs X Walking X X Sitting X X Twisting X X Stooping X X Crouching X X Crawling X X Talking X X Hearing X X Reaching X X Seeing X X Balancing X X Pushing up to 20 lbs. X X Pushing up to 50 lbs. X X Pulling up to 20 lbs. X X Pulling up to 50 lbs. X X Grasping X X Lifting or carrying up to 10 lbs. X X Lifting or carrying up to 20 lbs. X X Lifting or carrying up to 50 lbs. X X Feeling X X Moving (continuous motion) X X Using precise hand movements X X Reasoning or solving problems X X Reading X X Writing X X Performing mathematical calculations X X Adhering to deadlines under pressure X X Learning or retaining technical information X X Interacting with customers or visitors X X

MaxPak, a TRG company and affiliate of Schwarz Partners, has an exciting opportunity available for General Labor (Manufacturing) for in Lakeland, FL! The General Labor position(s) are responsible for all activities associated with the operation, set-up, cleaning, preventative maintenance, and recommending improvements to the processes, procedures, and/or operation. If you choose to take this path with MaxPak, you will have the opportunity to learn and advance your skillset by training in various areas allowing you the opportunity to learn and grow with a growing company. MaxPak strives to promote within and if this sounds like the career path you are looking for and want to work for an established company with a great benefit package, look no more. MaxPak truly values our employees as our greatest asset and we strive to support both you and your family at work and in life. Our mission is to provide value-added solutions to the most demanding customers. ESSENTIAL JOB FUNCTIONS FOR THIS POSITION: Follow & Adhere to all Safety Rules & Policies Understand machine set-up techniques for the Die Cutter - (i.e.: print plates and die boards) Inspect all dies before and after each run to ensure that any and ALL repairs are made BEFORE the next run Monitor and adhere to specifications for each customer order and ensure print quality is in accordance with all required specifications Maximize the utilization of the equipment by operating the machinery at peak capacity and speed Crosstrain on other machines when possible and necessary Completion of required reports in an accurate and timely manner including: Production Data, Machine Operational Status, Safety Data, Quality Data, and any other reporting requested by your Supervisor Completing Maintenance Work Orders for necessary repairs. Preventative Maintenance Installation of Die Boards and Print Plates Training for new hires to the machine center Ensuring the crew is working safely and report any safety issues to your Supervisor REQUIRED EDUCATION & EXPEREINCE: High school diploma or GED Experience working in a manufacturing environment PREFERRED EXPEREINCE: Experience in the corrugated box industry REQUIRED SKILLS & ABILITIES: Ability to read a tape measure with speed and accuracy Ability to calculate figures and amounts such as percentages, measurement, volume, and rate. Ability to apply concepts of High School Math Excellent communication skills. Ability to solve practical problems and not so practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. AS AN INDUSTRY LEADER, MAXPAK OFFERS: Year-round employment for job stability. Unlimited opportunities for growth, training, and career advancement. Exceptional pay and great, affordable benefits (including life, medical, dental, vision, 401(k) with company match and more!). Paid holidays, overtime pay, and vacation time. A clean facility, featuring state-of-the-art technology. A respectful, empowering, team-oriented and employee-friendly environment. If you would like to be part of a forward-thinking team with a family feel, culture of excellence, and customer-focused reliability, we want you to be a part of our team!

We Create Products and Brands That People Trust to Clean, Sanitize, and Protect Their Homes and Pools When you join KIK Consumer Products, you're joining a team that cares about the work we do and also about each other. We bring exceptional brands and products to consumers that help them protect the health and wellness of their families and the cleanliness of their homes and pools. We are committed to building a culture of performance driven by accountability, collaboration, and agility that enables timely fact-based decision-making and exceptional execution with unwavering ethics. As one of North America's largest independent manufacturers of consumer products, KIK helps a large portfolio of brands and retailers bring their products to life. Your Role at KIK In this role, you'll have the unique responsibility of ensuring product quality and safety, with the freedom to start and stop production as needed to insure quality and safety. You'll also gain hands-on experience with various equipment and duties, enhancing your skillset in a safe and empowering work environment. With a competitive pay rate of $20.00 per hour, this position offers the chance to develop your career while working 2nd shift: Monday - Friday 1:00pm-9:30pm. This role is eligible for the $1.00 shift differential for working 2nd and 3rd shift. What You'll Be Doing Monitor bottle indexing on conveyor systems through the filling process Monitor and document all Quality-related items (Hourly updates on production boards, Component verification to ensure correct product is produced, Bottle and label visual inspection for accurate packaging of product, verifying date code labeling correctness, Product verification, Weight checks on filled bottles) Strong communication skills regarding machine problems and quality requirements Ability to start and stop equipment and identify basic mechanical issues & adjust machine setups (Fillers, cappers, labelers, case packers, case erectors, palletizers) Follow all safety requirements including using appropriate Personal Protective Equipment - PPE (safety glasses, required footwear, hearing protection, hand protection, correct lifting methods, etc.) Support all changeover requirements of commodity products (changing caps, line clearance, assisting mechanics with changeovers) Make tank switches and understand & execute the valve change process What You'll Bring Minimum of high school degree or equivalent No prior manufacturing experience required, but preferred Demonstrated ability and willingness to learn machine operation in a fast-paced production environment Able to work scheduled overtime or shift changes when required Basic math skill set Able to lift 40 pounds periodically throughout the manufacturing shift and meet physical requirements of position including lifting, bending, standing for extended periods, reaching with both hands/arms, ability to visually inspect product Mechanically inclined to perform minor machine corrections within job responsibilities What You Will Get KIK offers a competitive salary and comprehensive benefits including health, wellness, dental, vision, life, and disability insurance. You can plan for your future with KIK's retirement savings options including employer match. KIK also recognizes the importance of continuing education and offers Education Assistance to our employees to encourage continued personal development and growth. About KIK We create products and brands that people trust to clean, sanitize, and protect their homes, pools, and cars. We are one of North America's largest independent consumer product manufacturers with 16 North American manufacturing facilities. We also operate globally in Canada, Europe, and Australia. We are known for our portfolio of notable brands including Spic and Span and Comet cleaning products, Clorox Pool&Spa™ (under license), BioGuard , and Natural Chemistry pool chemicals. We are also the #1 producer in North America of store-brand (“private label”) bleach and a leading private-label provider of laundry detergent and additives, dishwashing products, general-purpose cleaning, and other home care products. Our global team of over 2,300 employees drives our capabilities in product development, product formulation, strategic sourcing, manufacturing, packaging design, brand marketing, project management, quality assurance, compliance, distribution, and logistics. Our organization is constantly evolving and is driven by a set of “One KIK” values - a dedication to following through on commitments in a customer-focused, profit-motivated way; while never compromising on safety, ethics, or integrity. KIK is an Equal Employment Opportunity / Affirmative Action employer. KIK does not discriminate against qualified applicants or employees based on race, color, age, religion, sex, pregnancy, national origin, ancestry, age, physical or mental disability, veteran status, status in uniformed services, sexual orientation, gender identity, gender expression, marital status, genetic information or any other status protected by law. KIK is also committed to providing reasonable accommodation for applicants and employees with protected disabilities to the extent required by applicable laws. If you require reasonable accommodation to participate in the job application, or interview process, or to perform the essential functions of the job, please contact Human Resources immediately. Privacy Policy: ************************************************

4131 Hwy 17 South Bartow Florida 33830-7567 Why Valmont We're Here to Move the World Forward. Valmont impacts millions of people around the world every day, yet they might not realize the many ways. Our technology is helping feed the growing population, supplying the world with more reliable energy and access to renewables, enhancing connectivity in remote and urban locations to create a sustainable future and so much more. Simply put, Valmont is advancing agricultural productivity and reimagining vital infrastructure to make life better. Join a Fortune 1000 company that respects hard work, honors diversity and invests in our employees as we focus on creating the world of tomorrow, today. We are the modern workforce . Are you ready to move the world forward? Apply now. A Brief Summary of This Position Valmont is currently seeking a highly motivated and talented individual for the Machine Operator position. We are looking for a highly driven individual that will assist in various daily manufacturing production activities across multiple departments within the plant. Additionally, you will… Essential Functions Knowledge of department and plant processes. Knowledge of production equipment/handheld tools used in department in a professional manner (Spinner, Iron Worker, Ring Roller, Spiral Roller, Parts Washer and Mig and Stick Welding. Forklift Certification. Ability to read blueprints. Operate Spinner and complete inspections. Department processes and safety training. Perform minor machine maintenance such as oiling machines, dies, or work pieces. Reads job specifications to determine machine adjustments and material requirements. Participate in Lean manufacturing, Gemba and 5S. Ability to accurately use and read a tape measure. Demonstrate excellent safety practices and behaviors which conform to all Valmont safety policies and procedures. Understand mixes, hydraulic pumps and pressures, flow path and comprehension of equipment clean up. Ability to work overtime as required to meet business needs. Demonstrates the ability of attention to detail of product and processes. Perform strenuous activities for a moderate duration. Maintains an attitude that unlawful or unethical actions are not accepted. Performs other duties directed by leaders and management. Actively participate in department safety, demonstrate excellent safety practices and behaviors, which conform to all Valmont safety policy and procedures. Other important Details about the Role Ability to communicate and interact with coworkers in a professional manner. Ability to pay attention to detail and follow work instructions. Ability to work overtime as required to meet business needs. Remove all debris and foreign material from mold. Appropriately apply a thin layer of oil to coat mold skin from tip to butt. Articulate the difference in chuck bodies and wedges and install them correctly on to the mold strand. Ability to read, measure and install the false plate per the engineered drawing. Ability to read and comprehend the daily layout sheet and install the correct size spiral wire in the mold to approximately match the mold sections dimensions. Ability to read and comprehend the engineered drawing and determine the correct type and length of demold and install correctly and while it is flush and secured in place at the tip of the tension plate with tie wire. Obtains initial stress jack certification from EHS. Identify and report safety hazards. Assist with general plant clean up and housekeeping. This position reports to the Department Supervisor. Required Qualifications of Every Candidate (Education, Experience, Knowledge, Skills and Abilities) High school diploma or GED is highly desirable but not required. One (1) to three (3) years of relevant experience. Must be willing to become forklift certified. Ability to work overtime as required to meet business needs. Ability to read and follow written and verbal instructions in English. Communicate problems or needs to departmental supervision. Communicate and interact with coworkers in a professional manner. Pay attention to detail and follow work instructions. High awareness for safety with the ability to wear all required PPE and work in a non-temperature controlled environment, as well as with exposure to outdoors. Ability to safely lift up to 50 pounds, although most frequent lift is up to 30 pounds. Ability to spend 75% of workday standing or walking, 10% bending or kneeling, 10% stooping, and 5% climbing. Ability to be company trained and authorized to operate equipment and machinery. Ability to work overtime as required to meet business needs. Self-motivated ability to be internally inspired to perform task to the best of one's ability using his/her own drive or initiative. Passion and integrity with the drive to excel and deliver exceptional results. Highly Qualified Candidates Will Also Possess These Qualifications High School diploma or GED Machine and equipment certification Educational Background Must be able to read and write legibly. Must possess adequate communication and interpersonal skills to successfully interact with other employees. Must display and aptitude for problem solving and the ability to plan for potential problems or needs. Job Training Skill Development In addition to the above, should have a basic understanding to make most necessary decisions within three months and have total comprehension of the job within one year. Decision Making The incumbent must be able to make decisions, voice concerns and provide feedback on any safety issues regarding the scope of this position. Job Conditions Requires employee to work outside in heat, cold, wet and humid dusty environment. Benefits Valmont offers employees and their families a comprehensive Total Wellbeing benefit package to ensure their individual and family's overall wellness needs are met. Some offerings are dependent upon the role, work schedule, or location and can include the following: Healthcare (medical, prescription drugs, dental and vision) 401k retirement plan with company match Paid time off Employer paid life insurance Employer paid short-term and long-term disability including maternity leave Work Life Support Tuition Reimbursement up to $5,250 per year Voluntary programs like tobacco cessation, Type 2 diabetes reversal, one-on-one health coaching, mortgage services and more Valmont does not discriminate against any employee or applicant in employment opportunities or practices on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, veteran status, disability or any other characteristic protected by law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. If you have a disability and require any assistance in filling out the application for employment email *************************.

Job DescriptionDescription: The Warehouse Tech is responsible for the pulling of product on a day-to-day basis. Responsible for the loading and unloading of product to and from vendors/delivery trucks. Maintain a clean and organized work area, with keeping aisles clear and labeled. Responsible for product knowledge and internal codes used to distinguish between items. Able to work as a team to get each job completed in a timely manner to ensure it gets into the production team when they require it for the next build. Requirements: Warehouse Tech Essential Functions: • Responsible for having a higher level of product knowledge • Accountable for quality control on all parts before being brought to production • Ensures all counts on parts received from a vendor, or on work orders match the quantities specified • Places all product for a specific build in the prep area • Inspect raw materials used in the production of JL Marine products • Organize the warehouse by labeling and consolidating pallets, and ensure all like parts are stored together • Maintain a clean and clear work area • Maintain inventory counts when called upon • Clear out/set-up production area to ensure parts are taken out and counted, and new product is pulled in for them to begin the next build required Educational/Experience Requirement: • Less than high school education; or up to one month related experience or training; equivalent combination. • High school diploma or GED; or 1-3 months related experience and/or training; equivalent combination, preferred Machine and Tools to be Used • Forklift • Pallet Jack Knowledge, Skills and Abilities (KSAs): • Critical Thinking-Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. • Active Listening-Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times. • Monitoring-Monitoring/Assessing performance of yourself, other individuals, or organizations to make improvements or take corrective action. • Coordination-Adjusting actions in relation to others' actions. • Active Learning-Understanding the implications of new information for both current and future problem-solving and decision-making. • Social Perceptiveness-Being aware of others' reactions and understanding why they react as they do. • Service Orientation-Actively looking for ways to help people. • Learning Strategies-Selecting and using training/instructional methods and procedures appropriate for the situation when learning or teaching new things. • Time Management-Managing one's own time and the time of others. • Operation and Control-Controlling operations of equipment or systems. • Quality Control Analysis-Conducting tests and inspections of products, services, or processes to evaluate quality or performance. Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills: Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. Problem Solving Ability: Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Computer Skills: Basic personal computer skills Working Hours: 7:00 AM to 4:00 PM Monday through Friday, with a 1 hour lunch. Working Conditions/Physical Demands of the Job: The work environment characteristics described here are representative of those typical in a warehouse environment. The noise level in the work environment is usually moderate to loud, including the sounds of forklifts and tools. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands and fingers to handle or feel; and reach with hands and arms. The employee must frequently lift and/or move up to 50 pounds. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Since 1869, we've connected people through food they love. We're proud to be stewards of amazing brands that people trust. Our portfolio includes the iconic Campbell's brand, as well as Cape Cod, Chunky, Goldfish, Kettle Brand, Lance, Late July, Pacific Foods, Pepperidge Farm, Prego, Pace, Rao's Homemade, Snack Factory, Snyder's of Hanover. Swanson, and V8. Here, you will make a difference every day. You will be supported to build a rewarding career with opportunities to grow, innovate and inspire. Make history with us. Job Description: Following established procedures and working under supervision, perform a variety of job duties in the packaging. Heavy lifting may be required. Must be able to work on short notice. Must maintain accurate records. Perform other duties as assigned by supervisor. Work Conditions: 1) 12 Hour shift. Overtime is required. 2) Environment - Noise levels will be minimal to moderate. Temperature will range from controlled to very warm. Lighting is sufficient. There is a possibility of slippery footing from wet and dry ingredients. Individual base pay depends on work location and additional factors such as experience, job-related skills, and relevant education or training. Total pay may include other forms of compensation. In addition, we offer competitive health, dental, 401k and wellness benefits beginning on the first day of employment. Please ask your Talent Acquisition Partner for more information about our total rewards package. The Company is committed to providing equal opportunity for employees and qualified applicants in all aspects of the employment relationship, including consideration for employment, without regard to race, color, sex, sexual orientation, gender identity, national origin, citizenship, marital status, protected veteran status, disability, age, religion, or any other classification protected by law.

SummaryAs an Electronics Machine Operator manufacturing circuit card assembly, you will maintain and operate complex electronics machinery, by following established procedures, work instructions, and schematics. Your role includes performing both repetitive and non-repetitive production tasks, adjusting machine settings, and conducting preventive maintenance.Job Description Electronics Machine Operator - 2nd Shift Job Summary As an Electronics Machine Operator at GE Aviation, you will be responsible for operating and monitoring various automated machinery to assemble and test electronic components for critical aviation systems on our 2nd shift. This role requires attention to detail, adherence to safety protocols, and a commitment to quality in a fast-paced manufacturing environment. Responsibilities * Operate, set up, and troubleshoot automated and semi-automated machinery used in the assembly and testing of electronic components. * Monitor machine operations to detect malfunctions and make adjustments as needed to maintain product quality and production efficiency. * Perform routine preventative maintenance on equipment to ensure optimal performance and minimize downtime. * Load and unload materials and components into machines, ensuring correct placement and orientation. * Conduct in-process inspections and quality checks using precision measuring instruments to verify product specifications. * Record production data, including quantities produced, defects, and machine performance, in accordance with established procedures. * Identify and report equipment malfunctions, quality issues, or safety concerns to supervisory personnel. * Maintain a clean and organized work area, adhering to 5S principles. * Follow all safety regulations and company policies, including wearing appropriate personal protective equipment (PPE). * Collaborate with team members and supervisors to meet production targets and continuous improvement initiatives. Qualifications * High School Diploma or GED equivalent. * 1+ year of experience operating manufacturing machinery, preferably in an electronics or precision manufacturing environment. * Ability to read and interpret technical drawings, schematics, and work instructions. * Basic computer proficiency for data entry and system navigation. * Strong attention to detail and ability to perform repetitive tasks with accuracy. * Good manual dexterity and hand-eye coordination. * Ability to stand for extended periods and lift up to 25 pounds regularly. * Familiarity with lean manufacturing principles (e.g., 5S, waste reduction) is a plus. * Must be able to work the 2nd shift (e.g., typically afternoon/evening hours). * Strong commitment to safety and quality. Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No

B Shift: Monday-Friday, 1pm-9pm What Assembly contributes to Cardinal Health Manufacturing is responsible for cost of production and maintenance activities including process improvement, supply chain management, quality assurance, employee safety and engagement, and environmental commitment. Performs a variety of tasks ranging from repetitive to non-repetitive production to put together component parts to make assemblies, sub-assemblies or completed units, using standard operating procedures. May conduct quality inspections on processing line in accordance with quality specifications. Job Summary The Associate II, Assembly plays a key role in the manufacturing process of Cardinal Health medical products. The Associate II, Assembly operates multiple machines at once and performs routine inspections of manufactured products in accordance with quality specifications. This job reports defects and works with the quality team to investigate and identify route causes. This job ensures that manufactured parts are captured in bins and prepared for transport. The Associate II, Assembly tasks are performed in accordance with applicable safety guidelines, as well as appropriate processing standards. Responsibilities Sets up and operates production equipment in accordance with current manufacturing practices and standard operating procedures. Measures and records data associated with operating and manufacturing equipment. Verifies outputs in the manufacturing process and ensures that quality and quantity standards are met. Inspects components for debris, and or any other potential quality defect and reports defects as needed to management and the quality team. Performs duties in compliance with all safety rules and regulations required by the Company, Local, and State and Federal provisions. Qualifications 1-2 years of experience preferred High school degree or GED preferred What is expected of you and others at this level Applies acquired knowledge and skills to complete standard tasks Readily learns and applies new information and methods to work in assigned area Maintains appropriate licenses, training and certifications Works on routine assignments that require some problem resolution Works within clearly defined standard operating procedures and/or scientific methods Adheres to all quality guidelines Works under moderate degree of supervision Work typically involves regular review of output by work lead or supervisor Refers complex unusual problems to supervisor Pay rate: $16.45 per hour (includes shift differential) Bonus eligible: No Benefits: Cardinal Health offers a wide variety of benefits and programs to support health and well-being. Medical, dental and vision coverage Paid time off plan Health savings account (HSA) 401k savings plan Access to wages before pay day with my FlexPay Flexible spending accounts (FSAs) Short- and long-term disability coverage Work-Life resources Paid parental leave Healthy lifestyle programs Application window anticipated to close: 02/06/2026 *if interested in opportunity, please submit application as soon as possible. Candidates who are back-to-work, people with disabilities, without a college degree, and Veterans are encouraged to apply. Cardinal Health supports an inclusive workplace that values diversity of thought, experience and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. Cardinal Health is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law. To read and review this privacy notice click here

GENERAL PURPOSE This position is responsible for properly recognize the correct linen belonging to the account being processed. You must ensure there is no mixed, dirty, or damaged linen before feeding into the machine or hand-folding it. You must maintain a fast pace speed meeting company's expectations while practicing safety procedures. In addition, the Production Operators will help on making sure the machinery is working properly, by communicating with their leaders of any issues. DUTIES AND RESPONSIBILITIES Feeding machinery with sheets, Duvets, bathrobes pillowcases, towels, tablecloths napkins, mats Responsible for maintaining a clean and organized working station. Ensure the linen being process belongs to the account assigned. Identify any damaged, dirty, or mixed linen and properly place it in the correct containers. Maintain an average of 85% or above for production based on the IT system in place. (Spindle) Must be logged into the IT system in place. (Spindle) always while working on the machine. Will be required to perform other duties as requested, directed, or assigned. Qualifications QUALIFICATIONS High school diploma or equivalent preferred but not required. 3 months or more related experience in a commercial laundry or hotel industry. Ability to understand, comprehend, and follow simple instructions, short correspondence, and product labeling. Ability to add and subtract two-digit numbers. Able to work in a fast-paced environment. Ability to meet required performance goals and objectives. Ability to work in a team environment and alone. Good communications, both orally and written in English. Must have good attention to detail. APPLICABLE WORKING CONDITIONS WORKING CONDITIONS AMOUNT OF TIME TYPICALLY SPENT ON ACTIVITY Inside work: protected from weather conditions FREQUENTLY OCCASIONALLY RARELY NEVER Outside work: no effective protection from weather FREQUENTLY OCCASIONALLY RARELY NEVER Both inside and outside work: activities occur both inside and outside an office enclosure FREQUENTLY OCCASIONALLY RARELY NEVER Extreme cold: below 32 degrees for periods of more than 1 hour throughout the normal course of a day FREQUENTLY OCCASIONALLY RARELY NEVER Extreme heat: above 100 degrees for periods of more than 1 hour throughout the normal course of a day FREQUENTLY OCCASIONALLY RARELY NEVER Noise: employees must shout to be heard over ambient noise level (hearing protection required) FREQUENTLY OCCASIONALLY RARELY NEVER Vibration: exposure to oscillating movements of extremities or whole body FREQUENTLY OCCASIONALLY RARELY NEVER Potential hazards: moving parts, electricity, gas, scaffolding, chemicals, etc. FREQUENTLY OCCASIONALLY RARELY NEVER Terminal viewing: extended viewing of screens FREQUENTLY OCCASIONALLY RARELY NEVER Atmospheric conditions (in non-confined spaces): fumes, odors, mists, gases, poor ventilation, etc. FREQUENTLY OCCASIONALLY RARELY NEVER Oils: air and/or skin exposure to oils and other cutting fluids FREQUENTLY OCCASIONALLY RARELY NEVER Respirator: use of a respirator is required FREQUENTLY OCCASIONALLY RARELY NEVER Physical stamina: due to emergency or workload demands, subject to extended work hours requiring stamina beyond normal demands or levels FREQUENTLY OCCASIONALLY RARELY NEVER None: employee is NOT substantially exposed to adverse environmental conditions (work occurs in typical indoors, office or administrative environment) FREQUENTLY OCCASIONALLY RARELY NEVER ESSENTIAL ABILITIES AND FUNCTIONS ACTIVITY FUNCTION AMOUNT OF TIME TYPICALLY SPENT ON ACTIVITY Essential Non-Essential Rarely Occasionally Frequently Standing (on a hard surface) X X Stairs X Walking X X Sitting X X Twisting X X Stooping X X Crouching X X Crawling X X Talking X X Hearing X X Reaching X X Seeing X X Balancing X X Pushing up to 20 lbs. X X Pushing up to 50 lbs. X X Pulling up to 20 lbs. X X Pulling up to 50 lbs. X X Grasping X X Lifting or carrying up to 10 lbs. X X Lifting or carrying up to 20 lbs. X X Lifting or carrying up to 50 lbs. X X Feeling X X Moving (continuous motion) X X Using precise hand movements X X Reasoning or solving problems X X Reading X X Writing X X Performing mathematical calculations X X Adhering to deadlines under pressure X X Learning or retaining technical information X X Interacting with customers or visitors X X

We Create Products and Brands That People Trust to Clean, Sanitize, and Protect Their Homes and Pools When you join KIK Consumer Products, you're joining a team that cares about the work we do and also about each other. We bring exceptional brands and products to consumers that help them protect the health and wellness of their families and the cleanliness of their homes and pools. We are committed to building a culture of performance driven by accountability, collaboration, and agility that enables timely fact-based decision-making and exceptional execution with unwavering ethics. As one of North America's largest independent manufacturers of consumer products, KIK helps a large portfolio of brands and retailers bring their products to life. Your Role at KIK In this role, you'll have the unique responsibility of ensuring product quality and safety, with the freedom to start and stop production as needed to insure quality and safety. You'll also gain hands-on experience with various equipment and duties, enhancing your skillset in a safe and empowering work environment. With a competitive pay rate of $20.00 per hour, this position offers the chance to develop your career while working 2nd shift: Monday - Friday 1:00pm-9:30pm. This role is eligible for the $1.00 shift differential for working 2nd and 3rd shift. What You'll Be Doing * Monitor bottle indexing on conveyor systems through the filling process * Monitor and document all Quality-related items (Hourly updates on production boards, Component verification to ensure correct product is produced, Bottle and label visual inspection for accurate packaging of product, verifying date code labeling correctness, Product verification, Weight checks on filled bottles) * Strong communication skills regarding machine problems and quality requirements * Ability to start and stop equipment and identify basic mechanical issues & adjust machine setups (Fillers, cappers, labelers, case packers, case erectors, palletizers) * Follow all safety requirements including using appropriate Personal Protective Equipment - PPE (safety glasses, required footwear, hearing protection, hand protection, correct lifting methods, etc.) * Support all changeover requirements of commodity products (changing caps, line clearance, assisting mechanics with changeovers) * Make tank switches and understand & execute the valve change process What You'll Bring * Minimum of high school degree or equivalent * No prior manufacturing experience required, but preferred * Demonstrated ability and willingness to learn machine operation in a fast-paced production environment * Able to work scheduled overtime or shift changes when required * Basic math skill set * Able to lift 40 pounds periodically throughout the manufacturing shift and meet physical requirements of position including lifting, bending, standing for extended periods, reaching with both hands/arms, ability to visually inspect product * Mechanically inclined to perform minor machine corrections within job responsibilities What You Will Get KIK offers a competitive salary and comprehensive benefits including health, wellness, dental, vision, life, and disability insurance. You can plan for your future with KIK's retirement savings options including employer match. KIK also recognizes the importance of continuing education and offers Education Assistance to our employees to encourage continued personal development and growth. About KIK We create products and brands that people trust to clean, sanitize, and protect their homes, pools, and cars. We are one of North America's largest independent consumer product manufacturers with 16 North American manufacturing facilities. We also operate globally in Canada, Europe, and Australia. We are known for our portfolio of notable brands including Spic and Span and Comet cleaning products, Clorox Pool&Spa (under license), BioGuard, and Natural Chemistry pool chemicals. We are also the #1 producer in North America of store-brand ("private label") bleach and a leading private-label provider of laundry detergent and additives, dishwashing products, general-purpose cleaning, and other home care products. Our global team of over 2,300 employees drives our capabilities in product development, product formulation, strategic sourcing, manufacturing, packaging design, brand marketing, project management, quality assurance, compliance, distribution, and logistics. Our organization is constantly evolving and is driven by a set of "One KIK" values - a dedication to following through on commitments in a customer-focused, profit-motivated way; while never compromising on safety, ethics, or integrity. KIK is an Equal Employment Opportunity / Affirmative Action employer. KIK does not discriminate against qualified applicants or employees based on race, color, age, religion, sex, pregnancy, national origin, ancestry, age, physical or mental disability, veteran status, status in uniformed services, sexual orientation, gender identity, gender expression, marital status, genetic information or any other status protected by law. KIK is also committed to providing reasonable accommodation for applicants and employees with protected disabilities to the extent required by applicable laws. If you require reasonable accommodation to participate in the job application, or interview process, or to perform the essential functions of the job, please contact Human Resources immediately. Privacy Policy: ************************************************

Details Job Title: Production Tech Department: Operations Reports to: Production Supervisor FLSA Status: Full-Time, Non-Exempt Our mission is to share a sense of adventure with the world through our high performance marine products while instilling and inspiring consumer confidence with superior service. Benefits 100% employer paid - Employee/family health plan option available Health Savings Account (HSA) - with generous employer matching program Dental, Vision, Voluntary Life Insurance 100% employer paid - Employee Life Insurance, Short Term and Long-Term Disability Insurance Accident, Hospital and Critical Illness 401K with generous employer matching program Paid time off Holiday pay Annual employee apparel spending allowance Employee Referral Program Summary The Production Tech tends one or more machine tools, special purpose machines, or works to specifications on production basis for assembling an entire product or components of a product to produce the highest quality product for the end user. Company Values: Exceptional Client Service - Our customers are our life blood, we treat them as the essential partners that they are by going the extra mile and putting customer needs first Innovation and Growth - Always looking to acquire new information and try new things to improve how we work Ethical Orientation - Earns the trust and confidence of coworkers and customers through honest communication, ethical behavior and professionalism in all interactions Driven & Passionate - Shows passion for improving the delivery of services with a commitment to continuous improvement Duties and Responsibilities Lifts work piece manually onto pallets or workstation for assembly. Perform quality checks on products and parts Inspects and measures machined work pieces to verify conformance to specifications. Count and assemble kits for other components. Wrap and box components. Cleans machined parts. i.e. drill table, drill press. Tends machines and equipment other than machine tools. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice Requirements: Machine and Tools Used Ability to use and understand air tools Ability to use sockets and wrenches Box Taping Machine Language Skills: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Problem Solving Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Working Hours: Hours will be 7:00 AM to 4:00 PM Monday through Friday Working Conditions/Physical Demands of the Job: Warehouse/Production: The work environment characteristics described here are representative of those typical in a warehouse environment. The noise level in the work environment is usually moderate to loud, including the sounds of forklifts and tools. The temperature in the warehouse is moderate to hot depending on the time of the year. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands and fingers to handle or feel; and reach with hands and arms. The employee must frequently lift and/or move up to 50 pounds. *Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

SummaryAs an Electronics Machine Operator manufacturing circuit card assembly, you will maintain and operate complex electronics machinery, by following established procedures, work instructions, and schematics. Your role includes performing both repetitive and non-repetitive production tasks, adjusting machine settings, and conducting preventive maintenance.Job Description Electronics Machine Operator - 2nd Shift Job Summary As an Electronics Machine Operator at GE Aviation, you will be responsible for operating and monitoring various automated machinery to assemble and test electronic components for critical aviation systems on our 2nd shift. This role requires attention to detail, adherence to safety protocols, and a commitment to quality in a fast-paced manufacturing environment. Responsibilities * Operate, set up, and troubleshoot automated and semi-automated machinery used in the assembly and testing of electronic components. * Monitor machine operations to detect malfunctions and make adjustments as needed to maintain product quality and production efficiency. * Perform routine preventative maintenance on equipment to ensure optimal performance and minimize downtime. * Load and unload materials and components into machines, ensuring correct placement and orientation. * Conduct in-process inspections and quality checks using precision measuring instruments to verify product specifications. * Record production data, including quantities produced, defects, and machine performance, in accordance with established procedures. * Identify and report equipment malfunctions, quality issues, or safety concerns to supervisory personnel. * Maintain a clean and organized work area, adhering to 5S principles. * Follow all safety regulations and company policies, including wearing appropriate personal protective equipment (PPE). * Collaborate with team members and supervisors to meet production targets and continuous improvement initiatives. Qualifications * High School Diploma or GED equivalent. * 1+ year of experience operating manufacturing machinery, preferably in an electronics or precision manufacturing environment. * Ability to read and interpret technical drawings, schematics, and work instructions. * Basic computer proficiency for data entry and system navigation. * Strong attention to detail and ability to perform repetitive tasks with accuracy. * Good manual dexterity and hand-eye coordination. * Ability to stand for extended periods and lift up to 25 pounds regularly. * Familiarity with lean manufacturing principles (e.g., 5S, waste reduction) is a plus. * Must be able to work the 2nd shift (e.g., typically afternoon/evening hours). * Strong commitment to safety and quality. Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No