Production worker jobs in Fort Wayne, IN

The Electronics Production Operator works onsite and in-person to performs assembly operations to mass-produce products: relays, thermostats, actuators, and other heating and cooling control devices. ESSENTIAL DUTIES AND RESPONSIBILITIES Include the following. Other duties may be assigned. The below statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties, and requirements of personnel as classified. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Set up the assembly line/workstation and stock parts for the product to assemble. Refer to the most current product engineering prints and work instructions to assemble parts to build products. Glue, clamp, press, screw, or solder parts together. Set up, operate, maintain, and run machines such as arbor presses, punch presses, mold machines, or riveting machines. Report issues that would compromise product quality, or damage to tools or machinery.

Assure a quality product is efficiently produced and packed in a safe and proper manner to ensure on-time delivery to the customer. This position covers tending, packing, and utility. PRIMARY DUTIES AND RESPONSIBILITIES: Respond to /and operate machines Identify serious problems for maintenance Assemble and pack boxes with light-weight packaging components consisting of lids and tubs Place boxes of finished goods on skids approximately 24 times per hour On occasion (up to approximately 6 times per hour) lift cases weighing up to 30lbs. to a height of 6 ft. to put on skids Push boxes into case sealer Deliver materials to machines (inserts, film, color, resin, etc.) Inspect product as per quality standards and pack boxes Apply proper labels and identification codes to boxes of product Complete traceability forms and record production data, enter data into computer, verify that correct labels are applied to boxes and production information is correct. Perform online quality checks Maintain a clean and organized work area Perform c/o in a timely manner following procedures and work instructions. Tend 3 lines at a time and/or pack 2 lines at a time and/or run as a utility (filling and pulling boxes, pulling skids to the staging area, filling materials for packer on the lines, and break relieve packers) supply the production lines based on your shift-assigned duties. Follow procedures and guidelines as defined by the Good Manufacturing Practices (GMP) and the Master Cleaning Schedule Performs other related duties as assigned. Qualifications: Ability to effectively function in a broad-based, fast-paced work environment with minimal supervision. The ability to understand and follow verbal and written instructions in English is a requirement. Must be able to read, write and speak English fluently. Physical Demands: The physical demands described here are representative of those that must be met by employees to successfully perform the essential functions of this job. Must be on their feet all day; standing, stooping, squatting, and reaching can be expected along with the lifting of up to 30 lbs. boxes of raw materials and finished goods. Ability to tend 3 lines at one time and/or pack two lines at a time or run as a utility for all production lines as a product packer based on your shift assignment. Quality Standards: Must comply with all plant Good Manufacturing Practices (GMP) and Safe Quality Food (SQF). Safety: Proper use of all safety equipment (i.e., proper use of personal protective gear including hair net, beard net, gloves, hearing protection, and safety glasses) Proactive approach to safety and accident avoidance Maintain proper safety standards according to established Sanitary and Housekeeping Practices (GMP Compliance).

Job Description Production Worker 1st Shift: Monday - Thursday 6:00 a.m. - 4:30 p.m. 3rd Shift: Monday - Thursday 7:30 p.m. - 6:00 a.m. starting pay is $20/hour - $25.15/hour depending on position **3rd Shift positions pay an additional $3/hour shift premium** POSITION DEMANDS: Good verbal and written communication skills Have knowledge and understanding of all safety guidelines and specific safety hazards associated with position. Ability to be overhead crane trained Able to safely use and demonstrate the safe use of utility knife and common hand and power tools Maintain good attendance and a positive work attitude Ability to use basic math skills Understand the proper disposal of all chemicals and waste on the line Have knowledge of and use all safety equipment required for position PRINCIPAL RESPONSIBILITIES: Ensure product conforms to the requirements of the Quality System and are acceptable for our customer's use Ensure proper tools, equipment and material are in safe operating order Maintain clean work area throughout the shift Responsible for 5S and TPM compliance

AZZ Inc. is a leading provider of specialized products and services designed to meet the unique needs of industrial markets worldwide. With a rich history spanning several decades, AZZ has established a strong reputation for innovation, quality, and customer satisfaction. At AZZ, our culture is defined by trust, respect, accountability, integrity, teamwork and safety ("TRAITS"). We are dedicated to our employees by fully training and equipping them and providing a safe environment to grow personally and professionally. We strive to build, maintain and create a work environment that attracts and retains employees who are high contributors, have outstanding skills, are engaged in our culture, and who embody our Company mission: to create superior value in a culture where people can grow both professionally and personally, and where TRAITS matter. As AZZ Inc. continues to evolve and innovate, it remains committed to driving shareholder value while maintaining its reputation as a leader in industrial solutions. With a strong foundation built on decades of experience and a forward-thinking approach, AZZ Inc. is poised to continue its upward trajectory, delivering sustainable growth and an unwavering commitment to excellence. Job Description AZZ has an exciting 1st shift opportunity for a production worker at our Hamilton facility. Reporting to the Operations Manager you will help handle and clean material through the galvanizing process, to help us meet customer commitments. Duties and Responsibilities Responsible for tying or assisting with tying material onto racks with wire or chain for safe movement through the galvanizing process. Use wire to tie material to bow racks, universal racks, or other tooling to prepare for the pickling tanks using specific training methods for the galvanizing process. Use rope to lift and prepare material for the pickling tanks using specific training methods for galvanizing process. Operates and visually inspects all equipment (i.e. forklifts, cranes, tooling, etc.) prior to usage to ensure no maintenance is needed. Learns to rack a variety of materials by assisting others. Racks, unracks or cleans material in order as directed. May learn to use a torch to dry materials before hot dipping. May clean material using a grinder, file, or brush as specified by the customer. Inspects material for sags, runs, drips, bare spots and reports it to management. Uses bolt cutters to remove wire from product and tooling and disposes of it per established procedures. Learns to inspect materials for holes, smothered spots, etc. Perform housekeeping activities to keep production area and equipment clean and organized. Confers with supervisors to report material conditions that could result in production or customer problems by form of damage or quality issues. May assist with training new production helpers as specified by management. Required to wear protective equipment, follow safety rules and all company policies and procedures Qualifications 1+ years of manufacturing experience preferred Must be able to lift 50 lbs Must be able to work in a non-climate controlled facility Excellent verbal and written communication skills Previous experience utilizing hand tools is preferred Minimum Education High School diploma or equivalent is required Additional Information What We Offer Competitive salary and bonus structure. Comprehensive health, dental, and vision benefits package. Retirement savings plan with company match. Opportunities for professional growth and development in a dynamic industry. All your information will be kept confidential according to EEO guidelines. #LI-Onsite We are an Equal Opportunity Employer. AZZ Inc. is a Drug Free Workplace

ABOUT LOZIER Headquartered in Omaha, Nebraska, with facilities across the U.S., Lozier Corporation is the leading manufacturer of products used by retailers in stores and warehouses, with a vision to be operationally excellent in support of retail's present and future. Retailers have relied on our quality products and service for more than 65 years. BENEFITS AND COMPENSATION 1st shift: $20.16 2nd shift: $23.17 $1,000 bonus after completion of 90 days of employment (subject to taxes), applicable to new hires only. First pay increase after 6 months. PTO (Paid Time Off) plus paid holidays. Competitive Benefits Package (Eligible for medical, dental, and vision benefits on the first day of the month following 60 consecutive days of employment). Onsite Health Clinic. 401(k) with employer match. Employee Assistance Program. Educational Assistance Program. Career Development Programs. POSITION SUMMARY: Performs a variety of tasks to paint products. Individual will rotate between: Hook setter, Hang, Take-off/stack Individuals are responsible to handle a variety of parts. Individuals place hooks, hang parts and remove parts from a moving conveyor system. Individuals grasp the parts with one or two hands. The process is specific to the parts to be hung. The weight of the product will vary depending on the specific parts handled. Individuals may also work as Conveyor Cop and in Sign-Off

Founded in 1925 and a leader in the production of Stainless Steels, Nickel Alloys and Titanium Long products, Valbruna is a private company with 2,500 employees and an annual output of approx. 250,000 tons of specialty steels. Production is primarily focused on Stainless Steels and Specialty Alloys, available in blooms and billets, ingots, round, square, flat, hexagonal and angle bars, wire rod, wire, reinforcement bars and threaded rods, with the expressed goal of satisfying the most sophisticated needs of the customer. To that end, Valbruna is constantly updating its production capabilities and experience. Essential Duties/Responsibilities: Interprets program sheets, instructions, and process sheets to determine work to be done. Performs diversified operations on numerical control machining centers. Performs a variety of milling, drilling, boring, or related operations to close and interrelated tolerances. Reviews setup sheet and specifications to determine machining sequence and dimensions of finished work piece. Attaches fixture to machine bed and positions and secures work piece in fixture according to setup instructions. Selects and installs cutting tools in machine spindle or magazine. Manipulates controls and enters commands to index cutting tool to specified set point and to start machine. Observes and listens to machine operation to detect malfunctions, such as worn or damaged cutting tools. Changes cutting tools and location of work piece during machining process as specified in setup instructions. Performs a variety of inspection and gauging operations to insure maintenance of quality standards and specifications. Measures work piece for conformance to specifications. Could be placed on Overhead Crane, Heat Treat, Primary Mill, Forklift, Finish Operations. Notifies supervisor of discrepancies.

A leading manufacturer in the defense sector is seeking reliable and motivated Production Operators to join our growing team. This position plays a key role in ensuring efficient production, quality control, and equipment operation within a team -based manufacturing environment. Responsibilities: Operate and monitor production machinery and equipment safely and efficiently. Perform assembly, machining, and tool change tasks according to standard operating procedures. Conduct quality checks and machine resets as needed to maintain product standards. Maintain a clean and organized workstation in compliance with 5S and safety practices. Follow written instructions, work orders, and standardized work documentation. Collaborate effectively with teammates and supervisors to meet production goals. Support continuous improvement initiatives and report any safety or quality concerns immediately. Qualifications: High school diploma or equivalent (GED) required. Prior manufacturing, assembly, or production experience preferred. Strong attention to detail, teamwork, and communication skills. Must be able to work in a fast -paced environment and adapt to changing priorities. VantageClear Certification (or equivalent security certification) required

Production Operator perform a variety of routine tasks in support of manufacturing. Primary function of this position includes material/product handling and providing Manufacturing and Quality Assurance support. This position works collaboratively to achieve Dreyer's business objectives of safety, productivity, customer service, quality, and environmental protection. ROLE AND ACTIVITY To ensure your areas are clean, always organized and operating under discipline Operate to standard operating procedures in area assigned Ensure limited water is used when cleaning with “clean as you go” principle Ensure effective hand over with the next shift. To drive the production process to ensure that the products produced meet customer specification, quality and food safety. To ensure production meets targeted outputs through effective control of the manufacturing process To communicate effectively with the entire team Ensure health and safety requirements are fully met and a positive safety culture is maintained throughout the line Ensure you walk the talk always using the looking eyes, attend to the issues as and when they happen Promote the Froneri culture of employees being owners rather than just employees Following the principle of “will I do this to my home?” Other duties as assigned MEASURABLE OUTCOMES Hygiene, GMP and safety audits improving week over week Daily, weekly, monthly production targets are fully met Effective interaction with the team and takes direction from Machine Operator and Management Quality and improvement initiatives being implemented and maintained De-kitting the line LEVELS OF RESPONSIBILITY Quality and technical system adherence Completion of the required production to plan Health and Safety Impeccable hygiene standards always Clean as you go with No Ghost Busters. BEHAVIORS Performance - Open to change and will always look for better, simpler and more effective ways of operating. Zero compromise on Quality and excellence. - Hygiene, Process, Labor resource and Waste. Continually striving to increase knowledge of the processes and products - Understand all tasks, processes and activities as an expert in your area. Accuracy - Attention to details. Urgency - Always ready to respond. Adaptable - Adjust approach to match varied task requirements; Adjust behavior to others' styles; Change priorities to meet changing demands; Adjust quickly to new responsibilities and tasks Communication - presents ideas optimally, actively listens and works across functional boundaries. Teamwork/ Cooperation - effectively working within and outside the formal line of authority. Position Qualifications: 18 years of age or older Aptitude for automated mechanical processes with good troubleshooting and diagnostic skills Excellent interpersonal communication, math and problem solving skills Ability to work multiple shifts and/or schedules. High School diploma, GED or equivalent experience Work Environment In this position, the employee will regularly work with and around others; in a wet and/or humid environment; in areas of high noise level; and around mechanical, electrical, and pressurized equipment. The work is fast-paced. The position involves frequent exposure to nuts and other potential allergens. The pay scale for this role considers the wide range of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational needs. The pay scale disclosed below has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At Dreyer's Grand Ice Cream, it is not typical for an individual to be hired at or near the top of the range for their role, and compensation decisions are dependent on the facts and circumstances of each case. The pay rate in this position is $ 20.40 per hour. Dreyer's Grand Ice Cream Inc. provides equal employment opportunities for all applicants, regardless of race, religion, gender, national origin, age, disability, marital status, veteran status, or any other protected characteristic.

MULTIMATIC BUTLER (Structures & Suspension) is expanding its workforce and are searching for dynamic individuals who desire to join an energetic and dedicated team. Multimatic is a global enterprise supplying engineered components, systems and services to the automotive industry. The company's success has been fueled by its ability to attract and motivate a team of highly skilled and passionate individuals who want to make a difference. With expanding facilities around the world, including in Canada, the US, the UK, Germany, Mexico, Japan and China, there is always room in Multimatic's growing team for people who share a dedication to technical excellence, quality and enthusiasm. Why Work For Multimatic? Outstanding Compensation & a Culture that values its associates! Great benefits first day of employment ; (e.g. Medical, Dental, Vision, Paid and unpaid time-off, & 401k match, Company provided Uniforms, & PPE reimbursement programs). Tuition Assistance for Apprenticeships & other continuing education programs. An excellent opportunity to be part of new product launches. Work with high-tech equipment (tube bending, hot forming presses, lasers, with over 180+ robots throughout the facility). Patented technology that is exclusive to Multimatic Butler. Perhaps best known as constructor of the new Ford GT road and race cars, Multimatic's products also span a wide range of automotive mechanisms, structures and suspension systems (including Formula 1 race dampers). FACILITY ADDRESS: Multimatic BUTLER 201 RE Jones Road Butler, Indiana USA 46721 SUMMARY - PRODUCTION OPERATOR (2nd Shift 2pm-10pm) Assembles and loads materials, work in process and finished goods ensuring quality standards within the plant or work site by performing the following duties: ESSENTIAL DUTIES AND RESPONSIBILITIES Ability to safely and efficiently perform all assignments Maintain a clean and safe work environment at all times Responsible for following all established company policies and procedures Perform all functions of machine operation, setup, and changeover Ability to follow oral and written instruction, and provide clear communication to co-workers and supervision Review process book daily for new quality or process changes and be responsible for any changes or countermeasures put in place Perform minor troubleshooting, minor machine repair, and basic preventative maintenance as instructed Assist other material handlers with production duties as needed Ensure all production paper is filled out completely and accurately Participate in corrective action or continuous improvement activities when necessary Ensure all quality standards are met as required by the process books and inspection instructions Responsible for reworking product as required Be available to attend future training as deemed necessary for this position Performs loading, unloading, and assembly operations as required by the assigned machine The ability to effectively train future individuals in this position Performs other duties as directed by the supervisor or designee EDUCATION and/or EXPERIENCE High school diploma or general education degree (GED). One to three months related experience and/or training or the equivalent combination of education and experience. The ability to safely and effectively operate machinery; and material handling equipment within orientation period. MATHEMATICAL SKILLS The ability to add and subtract three digit numbers, multiply and divide. The ability to use and accurately read micrometers, dial calipers, digital indicators, tape measure, feeler gages, and taper gages in standard and metric measurements. REASONING ABILITY The ability to define problems, collect data, establish facts, and draw valid conclusions. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an associate to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The associate is consistently required to stand, walk, use hands to feel or handle objects, tools or controls; reach and lift with hands and arms; talk, see and hear. The associate is frequently required to climb, balance, stoop, kneel, crouch or crawl. Consistently bending, twisting, or stretching. The associate must frequently lift and/or move up to 50 pounds and will frequently be required to perform repetitive work tasks. The associate must be available to work scheduled overtime and assist in emergency situations. The associate must have the flexibility to work various shift hours. WORK ENVIRONMENT The environmental characteristics described here are representative of those an associate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the associate frequently works near moving parts. The associate is frequently exposed to electromagnetic fields, and vibration. The associate may occasionally work in high precarious places and is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually loud. Associate may be subject to temperature extremes for extended periods of time. To learn more about Multimatic, check out our youtube channel - ********************************** OjJIh3t90 If you are interested in this position, apply by sending us your cover letter and resume. We thank all interested candidates in advance; however, only individuals selected for interviews will be contacted. As part of our commitment to ensuring our employment practices are fair, accessible, and inclusive of persons with disabilities, recruitment-related accommodations for disabilities, are available upon request throughout the recruitment and assessment process for applicants with disabilities.

FXI is a leading producer of foam innovation in the Bedding, Furniture, Industrial, Home & Office, Healthcare, and Transportation markets. We have made it our mission to provide tailored solutions that delight our customers and consumers. With our corporate headquarters, high-tech research and development facility, and multiple manufacturing locations in North America, FXI has built a culture of innovation and achievement that is recognized by customers, suppliers and peers. Our products include finished goods, sub-assemblies, services, and raw materials for OEMs, fabricators, and retailers. You will find FXI's foam innovations inside, around, and under yourself in countless applications. Everywhere foam goes, FXI's innovations lead the way! Won't you join us? Responsibilities: * Sets up, operates, and controls the foam machine. - Performs cleaning operations required to maintain equipment in good operating condition. - Ensures all foam machine troughs are properly maintained and installed. - Assists in the preparation of papers, films, start up block and other related items in the normal set up procedure. - Help encourage and maintain good housekeeping. - Assist production supervision as required. - Knowledge of fraction/decimal conversions. - Reading comprehension skills adequate to understand written communication. - Write legible and understandable communication. Qualifiations: - Read, Understand and be successfully trained on all related standard operating - procedure and work instructions to perform tasks successfully and meet - customer and QMS requirements. - For specific quality expectations for this position, reference related SOP's and - work instructions - Be qualified to use appropriate measurement device(s) such as ruler, caliper, - tape measure, to verify product acceptance and proper machine operation. - Constant visual inspection of materials and product to ensure acceptance - Set aside any material or product that does not meet specification for disposition - by appropriate personnel (supervisor, quality representative)

Production Operators Location: Bluffton, Indiana We are seeking production operators for our structural foam molded facility and our high pressure plant. Production operators are responsible for trimming excessive plastics off parts, checking for defects, visual inspection, stacking and packing product. You must be able to stand, bend, lift up to 50 lbs, pull and push. Starting pay $20.00 per hour for level 1 operators (must be able to lift up to 50 pounds) with up to a $.50 increase at 60 days with excellent performance and attendance. Shift differential - $2.00 for night shift. Experience in injection molding a plus. Must be flexible to shift. Pre-employment drug screen required. We test for marijuana. Monthly attendance bonus - $500.00 per month.Excellent benefit package including: Medical, dental, vision, short term disability, long term disability, critical care and accidental care, life insurance, vacation, 10 paid holidays after 30 days of employment. 401k with matching available after 30 days.

Production Operators Location: Bluffton, Indiana We are seeking production operators for our structural foam molded facility and our high pressure plant. Production operators are responsible for trimming excessive plastics off parts, checking for defects, visual inspection, stacking and packing product. You must be able to stand, bend, lift up to 50 lbs, pull and push. Starting pay $20.00 per hour for level 1 operators (must be able to lift up to 50 pounds) with up to a $.50 increase at 60 days with excellent performance and attendance. Shift differential - $2.00 for night shift. Experience in injection molding a plus. Must be flexible to shift. Pre-employment drug screen required. We test for marijuana. Monthly attendance bonus - $500.00 per month.Excellent benefit package including: Medical, dental, vision, short term disability, long term disability, critical care and accidental care, life insurance, vacation, 10 paid holidays after 30 days of employment. 401k with matching available after 30 days.

Our people are the life of this company. Together, we build life into the kitchen. We are a nationwide team, designing and manufacturing the most comprehensive choice of kitchen cabinets in the U.S. Our people pride themselves on genuine collaboration, working to deliver a seamless, integrated, quality experience to anyone and everybody. Our shared purpose is to bring the kitchen to life - the place where people spend such a meaningful part of their personal and family lives, and the true heart of any home. This is why your career with our company can be so satisfying, rewarding and worthwhile. Do you enjoy woodworking? Want to be part of the 2nd largest privately owned cabinet manufacturer in the US? Then apply now for our New Paris, IN location!! No experience needed! We will train you if you are up to the challenge. Why not gain skills that you can use at home or even start a new hobby with? Come join us and be a part of crafting beautiful cabinets for many family's homes and benefit from the following: Weekly Paychecks $2 hour shift premium Health, Dental, Vision, Company paid Life Insurance & Short-Term Disability, Long-Term Disability, Accident & Critical Illness (Benefits effective the 1st of the month following your start date) 401K with Company match 11 paid holidays starting day 1 $500 Employee Referral Bonus Program We want you to be able to do: Read production paperwork specifications Maintain production and quality standards Follow all safety rules and work instructions; Employer provides PPE Minimum Qualifications: Ability to read a tape measure and use it effectively Team player Communication skills Excellent work ethics Willing and able to work overtime as needed EQUIPMENT USED - Includes air-powered tools (sanders, drills, nail & staple guns) and other power tools (portable sanders, saws, drills, etc.). ShiftFull or Part TimeFull time Cabinetworks Group (the “Company”) is an equal opportunity employer and we want to have the best available persons in every job. The Company makes employment decisions only based on merit. It is the Company's policy to prohibit discrimination in any employment opportunity (including but not limited to recruitment, employment, promotion, salary increases, benefits, termination and all other terms and conditions of employment) based on race, color, sex, sexual orientation, gender, gender identity, gender expression, genetic information, pregnancy, religious creed, national origin, ancestry, age, physical/mental disability, medical condition, marital/domestic partner status, military and veteran status, height, weight or any other such characteristic protected by federal, state or local law. The Company is committed to complying with all applicable laws providing equal employment opportunities. This commitment applies to all persons involved in the operations of the Company regardless of where the employee is located and prohibits unlawful discrimination by any employee of the Company. Cabinetworks Group is an E-Verify employer. E-Verify is an Internet based system operated by the Department of Homeland Security (DHS) in partnership with the Social Security Administration (SSA) that allows participating employers to electronically verify the employment eligibility of their newly hired employees in the United States. Please click on the following links for more information. E-Verify Participation Poster: English & Spanish E-verify Right to Work Poster: English, Spanish

Job DescriptionDescription: Production Operator (Monday - Thursday 5AM-3:30PM Subject to Change) Are you looking for a stable career with a global company? Are you someone ready for the opportunity to grow your career?Univertical LLC has a limited number of openings available for qualified individuals who want an opportunity to work with a well-established and highly respected local manufacturing operation. You can build on your current skills or earn as you learn to become a valued team member with a worldwide supplier of copper products manufactured right here in Angola, IN. Our culture, our people and our passion is to be the best, and Univertical is proud of its employees who take pride and are dedicated to their work. In return, Univertical offers an excellent benefit package which includes: Health and Dental Insurance, 401K with 25% employer match, Vacation, and tuition assistance. An ideal candidate will understand the importance of good attendance, clean workstation, and a safe work environment. An ideal candidate will have a high school diploma or equivalent, 1-3 years of manufacturing experience preferred, and a motivation to work hard. RESPONSIBILITIES:· Fork truck and overhead crane operation· Follow all ISO, safety and company policies· Operate required equipment following written operating procedures· Select and visually inspect approved raw materials prior to processing· Inspect, sort, package, label and weigh product· Record daily production· Stack hoppers and racks of product in their proper storage areas· Maintain a clean and orderly work area· Perform other duties as required by Supervisor Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Health insurance Life insurance Paid time off Professional development assistance Referral program Relocation assistance Retirement plan Tuition reimbursement Vision insurance Schedule: Sun-W 5pm-5am Requirements: REQUIREMENT: · High School diploma or GED equivalent · Computer experience with knowledge in Excel spreadsheets · Forklift and overhead crane experience a plus · Ability to lift up to 75 pounds.

We're committed to hiring only those individuals who pride themselves on setting quality standards for the industry. We provide steady work, competitive wages, safer working conditions and good long term opportunities to train and increase their earnings. All our employees must display professionalism through: Unwavering Reliability and Punctuality Good Appearance and Attitudes Highly Productive Work Ethics Emphasis on Safety / Commitment to be Drug Free Job Description Heavy Factory Worker - APPLY NOW! Come join a dynamic team in Delphos, Ohio. We have a variety of different roles available for the 3rd shift: Palletizer, Labeling Operator, Casemaker, and/or Packer. . Qualifications Minimum Qualifications High School Diploma Must be open to working hours on any shift (3 shift factory 5 pm - 5 am) Must be able to work overtime (12 hr shifts) on a daily basis. Must be able to work weekends, when needed as per production demands Additional Information $9.75/hour Monday-Friday, mandatory overtime, Saturdays as needed 3rd shift 5 pm - 5 am 90 days Temporary to Direct Hire Eligible Upon Direct Hire; eligible for Benefits as well as potential Pay Increase

AZZ Inc. is a leading provider of specialized products and services designed to meet the unique needs of industrial markets worldwide. With a rich history spanning several decades, AZZ has established a strong reputation for innovation, quality, and customer satisfaction. At AZZ, our culture is defined by trust, respect, accountability, integrity, teamwork and safety ("TRAITS"). We are dedicated to our employees by fully training and equipping them and providing a safe environment to grow personally and professionally. We strive to build, maintain and create a work environment that attracts and retains employees who are high contributors, have outstanding skills, are engaged in our culture, and who embody our Company mission: to create superior value in a culture where people can grow both professionally and personally, and where TRAITS matter. As AZZ Inc. continues to evolve and innovate, it remains committed to driving shareholder value while maintaining its reputation as a leader in industrial solutions. With a strong foundation built on decades of experience and a forward-thinking approach, AZZ Inc. is poised to continue its upward trajectory, delivering sustainable growth and an unwavering commitment to excellence. Job Description AZZ has an exciting 1st shift opportunity for a production worker at our Hamilton facility. Reporting to the Operations Manager you will help handle and clean material through the galvanizing process, to help us meet customer commitments. Duties and Responsibilities Responsible for tying or assisting with tying material onto racks with wire or chain for safe movement through the galvanizing process. Use wire to tie material to bow racks, universal racks, or other tooling to prepare for the pickling tanks using specific training methods for the galvanizing process. Use rope to lift and prepare material for the pickling tanks using specific training methods for galvanizing process. Operates and visually inspects all equipment (i.e. forklifts, cranes, tooling, etc.) prior to usage to ensure no maintenance is needed. Learns to rack a variety of materials by assisting others. Racks, unracks or cleans material in order as directed. May learn to use a torch to dry materials before hot dipping. May clean material using a grinder, file, or brush as specified by the customer. Inspects material for sags, runs, drips, bare spots and reports it to management. Uses bolt cutters to remove wire from product and tooling and disposes of it per established procedures. Learns to inspect materials for holes, smothered spots, etc. Perform housekeeping activities to keep production area and equipment clean and organized. Confers with supervisors to report material conditions that could result in production or customer problems by form of damage or quality issues. May assist with training new production helpers as specified by management. Required to wear protective equipment, follow safety rules and all company policies and procedures Qualifications 1+ years of manufacturing experience preferred Must be able to lift 50 lbs Must be able to work in a non-climate controlled facility Excellent verbal and written communication skills Previous experience utilizing hand tools is preferred Minimum Education High School diploma or equivalent is required Additional Information What We Offer Competitive salary and bonus structure. Comprehensive health, dental, and vision benefits package. Retirement savings plan with company match. Opportunities for professional growth and development in a dynamic industry. All your information will be kept confidential according to EEO guidelines. #LI-Onsite We are an Equal Opportunity Employer. AZZ Inc. is a Drug Free Workplace

Headquartered in Omaha, Nebraska, with facilities across the U.S., Lozier Corporation is the leading manufacturer of products used by retailers in stores and warehouses, with a vision to be operationally excellent in support of retail's present and future. Retailers have relied on our quality products and service for more than 65 years. BENEFITS AND COMPENSATION 1st shift: $20.16 2nd shift: $23.17 $1,000 bonus after completion of 90 days of employment (subject to taxes), applicable to new hires only. First pay increase after 6 months. PTO (Paid Time Off) plus paid holidays. Competitive Benefits Package (Eligible for medical, dental, and vision benefits on the first day of the month following 60 consecutive days of employment). Onsite Health Clinic. 401(k) with employer match. Employee Assistance Program. Educational Assistance Program. Career Development Programs. POSITION SUMMARY: Performs a variety of tasks to paint products. Individual will rotate between: Hook setter, Hang, Take-off/stack Individuals are responsible to handle a variety of parts. Individuals place hooks, hang parts and remove parts from a moving conveyor system. Individuals grasp the parts with one or two hands. The process is specific to the parts to be hung. The weight of the product will vary depending on the specific parts handled. Individuals may also work as Conveyor Cop and in Sign-Off

FXI is a leading producer of foam innovation in the Bedding, Furniture, Industrial, Home & Office, Healthcare, and Transportation markets. We have made it our mission to provide tailored solutions that delight our customers and consumers. With our corporate headquarters, high-tech research and development facility, and multiple manufacturing locations in North America, FXI has built a culture of innovation and achievement that is recognized by customers, suppliers and peers. Our products include finished goods, sub-assemblies, services, and raw materials for OEMs, fabricators, and retailers. You will find FXI's foam innovations inside, around, and under yourself in countless applications. Everywhere foam goes, FXI's innovations lead the way! Won't you join us? Responsibilities: To work with the foam pouring team to ensure that safety, production, and quality standards are met, and to provide analytical support for process improvements. The person in this developmental role is capable of becoming a Pourline Manager with experience and training and must be willing to relocate to a new pouring plant location for growth and/or a promotional opportunity. - Insure that safety is the number one priority in all Pourline department activities and that all safety procedures are followed by all members of the Pourline team. Oversee EH&S activities for the pouring department. - Monitor daily foam production and supervise the pour line hourly workforce as part of the training process. Adjust formulas as needed to maintain product within specifications. In this role, the incumbent must be fully capable of managing the line in the absence of the Technical or Pour Line Manager. - Participate, along with the Technical Manager or Pourline Manager, in all pour line HR related activities such as appraisals and disciplinary activities - As part of the pour line team, conduct trials to develop new and improved manufacturing processes and foam formulations - Provide analytical expertise for process improvements and SPC/SQC. - Troubleshoot equipment problems and solve process issues. - Direct/facilitate continuous improvement teams and training - Oversee inventory control and ordering of chemicals/raw materials. - Be fully capable of handling all pour line functions in SAP Qualifiations: - Bachelor's degree in Chemical or Mechanical Engineering preferred - 0-2 years previous experience in a manufacturing environment preferred - Task oriented individual able to perform in a fast-paced environment - SPC/SQC and RCA (Root Cause Analysis) e - Successful candidate will be expected to complete a 40 hour HAZWOPER training to understand proper procedures for safe handling of hazardous and non-hazardous waste. - Must possess planning/organization, analytical and strong problem solving skills - Basic mechanical and electrical aptitude to facilitate troubleshooting foam making problems. Previous foam production experience is a plus - Proficient computer skills including Word, Excel & PowerPoint. Minitab proficiency is a plus. - Experience using SAP or similar ERP system is a definite plus. - Outstanding communication and interpersonal skills - Must be self-directed and able to lead/facilitate diverse work teams - Ability to positively interact with others in the plant in a team environment

We're committed to hiring only those individuals who pride themselves on setting quality standards for the industry. We provide steady work, competitive wages, safer working conditions and good long term opportunities to train and increase their earnings. All our employees must display professionalism through: Unwavering Reliability and Punctuality Good Appearance and Attitudes Highly Productive Work Ethics Emphasis on Safety / Commitment to be Drug Free Job Description Heavy Factory Worker - APPLY NOW! Come join a dynamic team in Delphos, Ohio. We have a variety of different roles available for the 3rd shift: Palletizer, Labeling Operator, Casemaker, and/or Packer. . Qualifications Minimum Qualifications High School Diploma Must be open to working hours on any shift (3 shift factory 5 pm - 5 am) Must be able to work overtime (12 hr shifts) on a daily basis. Must be able to work weekends, when needed as per production demands Additional Information $9.75/hour Monday-Friday, mandatory overtime, Saturdays as needed 3rd shift 5 pm - 5 am 90 days Temporary to Direct Hire Eligible Upon Direct Hire; eligible for Benefits as well as potential Pay Increase