Production worker jobs in Plymouth, MA - 375 jobs

Job Title: Production Test Technician II Duration: 06 Months (Possible Extension or Conversion) Pay rate; $24/hr Qualifications: High School Degree or Equivalent 1 - 2 years of related experience Experience working in a lean manufacturing environment a plus Essential Knowledge, Skills And Abilities Have good manual dexterity Computer skills and literacy a plus Strong attention to detail Ability to manage multiple priorities and multiple tasks simultaneously Strong verbal communication skills Enjoy contributing to a diverse manufacturing group Able to embrace change Be a Team Player Must be a highly organized, self-managed individual who works with minimum supervision and the ability to work in a fast-paced environment Able to lift 20 pounds Stand/Sit/Walk 8 hrs a day Responsibilities: Perform a wide variety of mechanical or measurement assembly operations on product components, assemblies or sub-assemblies. Determines and/or follows methods and sequence of operations in performing wiring, component installation, hand soldering, cable assembling, bonding and fitting on assembly units. Make setups and adjustments holding tolerances to blueprint specifications. Essential Duties And Responsibilities Acquires job skills and learns all applicable company policies and procedures. Complete assigned tasks while following manufacturing, schedules, policy and procedures. Normally receives little instruction on daily work. Requires instructions on newly introduced assignments. Act as a champion of the company's Lean and Continuous Improvement programs. Time and attendance are in accordance with company policies, procedures and work area schedule. Complete work orders on schedule to ensure a constant flow of finished product to support customer service levels. Advise management of adverse manufacturing and/or equipment conditions and issues that are affecting production and /or safety. Complete a variety of manufacturing tasks as trained and directed by your supervisor including but not limited to bonding, potting, hand soldering, mechanical assembly. Operate equipment to manufacture parts and materials used in the production of ultrasound transducers. Notify manager of all NCM (non-conforming material). Identify and report all adverse conditions of the facility to management. Evaluation of performance will be based on ability to: Produce quality products in accordance to standards. Meet established standard times for standard operations greater than 80% of the time. Follow all applicable manufacturing procedures and documentation. Follow work order activities established via manufacturing reports. Accurately record labor time to all work order operations into the MRP system. Clean and maintain equipment (including tools and fixtures). Participate in the company's Lean and Continuous Improvement programs. Time and attendance (including the accurate reporting of time and attendance) Maintain work area 5s standards. Work with Team members with mutual respect and understanding. Demonstrate proficiency in at least one stage of manufacturing (bonding, wiring, potting, etc.

Site: North Shore Medical Center, Inc. Mass General Brigham relies on a wide range of professionals, including doctors, nurses, business people, tech experts, researchers, and systems analysts to advance our mission. As a not-for-profit, we support patient care, research, teaching, and community service, striving to provide exceptional care. We believe that high-performing teams drive groundbreaking medical discoveries and invite all applicants to join us and experience what it means to be part of Mass General Brigham. We need per diem sanitation worker to fill in that area for call outs or vacations to minimize overtime Job Summary Summary Performs a wide variety of food preparation and service duties as well as health and cleanliness. Does this position require Patient Care? No Essential Functions -Aid cooks in preparing meals and plating food as requested by the chef or other supervising employee. -Prepare simple meals such as salads or desserts. -Help cooks with food preparation duties for the day by cutting, peeling, or slicing as needed. -Greet and take customer orders, remember special requests, and deliver food in a timely manner. -Demonstrate excellent customer service with a positive demeanor when dealing with restaurant patrons, fielding all complaints promptly, answering questions, and making meal suggestions when asked. -Assist with cleaning the restaurant and dining area by picking up trash, clearing and washing plates and dishes, and wiping down tables as needed. -Adhere to food safety standards at all times, making sure that all food is free or contaminants and pathogens that might make customers sick. -Clean pots, pans, and any other dishes in the kitchen as needed, adhering to safety and sanitation standards at all times. Qualifications Education Some High School Completed preferred Can this role accept experience in lieu of a degree? yes Licenses and Credentials Experience experience directly related to the duties and responsibilities of role 0-1 year preferred Knowledge, Skills and Abilities - Knowledge of supplies, equipment, and/or services ordering and inventory control. - Ability to follow routine verbal and written instructions. - Ability to read and write. - Ability to understand and follow safety procedures. - Ability to safely use cleaning equipment and supplies. - Ability to lift and manipulate heavy objects. - Knowledge of food service lines set-up and temperature requirements. - Skill in cooking and preparing a variety of foods. - Knowledge of food preparation and presentation methods, techniques, and quality standards. Additional Job Details (if applicable) Physical Requirements Standing Frequently (34-66%) Walking Frequently (34-66%) Sitting Occasionally (3-33%) Lifting Occasionally (3-33%) 35lbs+ (w/assisted device) Carrying Occasionally (3-33%) 35lbs+ (w/assisted device) Pushing Occasionally (3-33%) Pulling Occasionally (3-33%) Climbing Occasionally (3-33%) Balancing Frequently (34-66%) Stooping Occasionally (3-33%) Kneeling Occasionally (3-33%) Crouching Occasionally (3-33%) Crawling Occasionally (3-33%) Reaching Occasionally (3-33%) Gross Manipulation (Handling) Frequently (34-66%) Fine Manipulation (Fingering) Frequently (34-66%) Feeling Constantly (67-100%) Foot Use Rarely (Less than 2%) Vision - Far Constantly (67-100%) Vision - Near Constantly (67-100%) Talking Constantly (67-100%) Hearing Constantly (67-100%) Remote Type Onsite Work Location 81 Highland Avenue Scheduled Weekly Hours 0 Employee Type Per Diem Work Shift Rotating (United States of America) Pay Range $17.36 - $21.09/Hourly Grade 1 At Mass General Brigham, we believe in recognizing and rewarding the unique value each team member brings to our organization. Our approach to determining base pay is comprehensive, and any offer extended will take into account your skills, relevant experience if applicable, education, certifications and other essential factors. The base pay information provided offers an estimate based on the minimum job qualifications; however, it does not encompass all elements contributing to your total compensation package. In addition to competitive base pay, we offer comprehensive benefits, career advancement opportunities, differentials, premiums and bonuses as applicable and recognition programs designed to celebrate your contributions and support your professional growth. We invite you to apply, and our Talent Acquisition team will provide an overview of your potential compensation and benefits package. EEO Statement: 3200 North Shore Medical Center, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religious creed, national origin, sex, age, gender identity, disability, sexual orientation, military service, genetic information, and/or other status protected under law. We will ensure that all individuals with a disability are provided a reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. To ensure reasonable accommodation for individuals protected by Section 503 of the Rehabilitation Act of 1973, the Vietnam Veteran's Readjustment Act of 1974, and Title I of the Americans with Disabilities Act of 1990, applicants who require accommodation in the job application process may contact Human Resources at **************. Mass General Brigham Competency Framework At Mass General Brigham, our competency framework defines what effective leadership “looks like” by specifying which behaviors are most critical for successful performance at each job level. The framework is comprised of ten competencies (half People-Focused, half Performance-Focused) and are defined by observable and measurable skills and behaviors that contribute to workplace effectiveness and career success. These competencies are used to evaluate performance, make hiring decisions, identify development needs, mobilize employees across our system, and establish a strong talent pipeline.

Job Title: Production Worker - Level I Pay Rate: $19.00/hour Shift: 1st Shift | [Insert hours, e.g., 6:00 AM - 2:30 PM] Schedule: Monday - Friday We are seeking a dependable and hardworking Production Worker Level I to assist with daily processing of customer orders. This entry-level role involves basic production, packaging, and warehouse tasks. Training is provided. Key Responsibilities: Prepare the production and loading areas for daily operations Use an electric pallet jack to move, stack, load, and unload products Make boxes and handle packaging materials Weigh, count, or scale products for customer orders Pack and label items according to order requirements Handle and distribute ice for storing temperature-sensitive products Clean processing areas and dispose of waste properly Monitor inventory supplies and ice machine as needed Follow safety protocols and procedures Perform other duties as assigned Qualifications: Basic understanding of warehouse or production tasks Ability to lift up to 100 lbs occasionally and 50 lbs frequently Able to work in cold environments (super freezer at -70°F) Comfortable standing, bending, and lifting throughout the shift Able to operate electric pallet jacks and basic equipment (training provided) Reliable and punctual with a strong work ethic Work Environment: Cold storage and production areas May work in slippery or wet conditions Physically demanding role with heavy lifting and repetitive tasks Team-based environment with a focus on quality and efficiency

Job Description Job Title: Production Worker - Level I Pay Rate: $19.00/hour Shift: 1st Shift | [Insert hours, e.g., 6:00 AM - 2:30 PM] Schedule: Monday - Friday We are seeking a dependable and hardworking Production Worker Level I to assist with daily processing of customer orders. This entry-level role involves basic production, packaging, and warehouse tasks. Training is provided. Key Responsibilities: Prepare the production and loading areas for daily operations Use an electric pallet jack to move, stack, load, and unload products Make boxes and handle packaging materials Weigh, count, or scale products for customer orders Pack and label items according to order requirements Handle and distribute ice for storing temperature-sensitive products Clean processing areas and dispose of waste properly Monitor inventory supplies and ice machine as needed Follow safety protocols and procedures Perform other duties as assigned Qualifications: Basic understanding of warehouse or production tasks Ability to lift up to 100 lbs occasionally and 50 lbs frequently Able to work in cold environments (super freezer at -70°ree;F) Comfortable standing, bending, and lifting throughout the shift Able to operate electric pallet jacks and basic equipment (training provided) Reliable and punctual with a strong work ethic Work Environment: Cold storage and production areas May work in slippery or wet conditions Physically demanding role with heavy lifting and repetitive tasks Team-based environment with a focus on quality and efficiency Powered by JazzHR zm7647TPCd

Summary:We are looking for a highly motivated and detail-oriented Production Assembler to join our team. As a Production Assembler, you will be responsible for assembling components and subassemblies of industrial air compressors and vacuum systems in a fast-paced, quality-driven environment. Key Responsibilities: Assemble and test components for industrial air compressors and vacuum systems according to technical drawings, specifications, and safety standards. Ensure proper functionality of components, parts, and assemblies, conducting quality checks and troubleshooting as needed. Operate hand tools, power tools, and other machinery used in the assembly process. Maintain a clean, organized, and safe work environment by following company safety protocols. Work closely with other team members to meet production goals and deadlines. Ensure accurate record-keeping of completed work, inventory, and parts used during assembly. Follow all company policies regarding product quality, safety, and productivity. Qualifications: High school diploma or equivalent; technical training or certification is a plus. Previous experience in mechanical assembly or a similar production environment preferred. Ability to read and interpret technical drawings, blueprints, and work instructions. Strong attention to detail with a focus on producing high-quality work. Ability to work independently and as part of a team. Basic knowledge of hand tools and power tools. Strong problem-solving skills and the ability to troubleshoot mechanical issues. Physical Requirements: Ability to lift up to 50 pounds regularly. Ability to stand, bend, and move for extended periods. Comfortable working in a manufacturing environment with noise, heat, and moving machinery.

Production Operator (2nd Shift) Rockland, MA Collaborate with Innovative 3Mers Around the World Choosing where to start and grow your career has a major impact on your professional and personal life, so it's equally important you know that the company that you choose to work at, and its leaders, will support and guide you. With a variety of people, global locations, technologies and products, 3M is a place where you can collaborate with other curious, creative 3Mers. This position provides an opportunity to transition from other private, public, government or military experience to a 3M career. The Impact You'll Make in this Role As a Production Operator, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative people around the world. Here, you will make an impact by: Observing all safety procedures, maintain a clean and safe work area Applying quality instructions & specifications Monitoring the production or packing operation to ensure quality objectives are met Loading/unloading material into & from equipment Working as a team member through sharing information, problem solving & assisting others Your Skills and Expertise To set you up for success in this role from day one, 3M requires (at a minimum) the following qualifications: Possess a High School Diploma/GED or higher (completed and verified prior to start) from an accredited institution ***Applicants meeting the basic qualifications above may be required to take and pass 3M elected testing as a part of the selection process*** Additional qualifications that could help you succeed even further in this role include: Minimum one (1) year of plant and/or manufacturing experience in a public, private, government, or military environment Post-high school education Basic computer knowledge Pay & Benefits Pay starting at $22.62/hour New hires start with 3 weeks paid vacation Health, vision and dental start day one Employee stock discount 401K Match of 5% Our plant operates 24/7 so we have multiple shifts available, including days, evenings, overnights, weekends, 8 hour shifts, 12 hour shifts, etc. Note - If you are selected for an overnight, evening or weekend shift, you may be brought onto a different shift initially for training purposes before starting on your actual shift. Work location: Onsite - 30 Commerce Rd, Rockland, MA 02370 Travel: N/A Relocation Assistance: N/A Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status). Supporting Your Well-being 3M offers many programs to help you live your best life - both physically and financially. To ensure competitive pay and benefits, 3M regularly benchmarks with other companies that are comparable in size and scope. Chat with Max For assistance with searching through our current job openings or for more information about all things 3M, visit Max, our virtual recruiting assistant on 3M.com/careers. The starting rate of pay for this position is $22.62 per hour. This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate's relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: *************************************************************** All US-based 3M full time employees will need to sign an employee agreement as a condition of employment with 3M. This agreement lays out key terms on using 3M Confidential Information and Trade Secrets. It also has provisions discussing conflicts of interest and how inventions are assigned. Employees that are Job Grade 7 or equivalent and above may also have obligations to not compete against 3M or solicit its employees or customers, both during their employment, and for a period after they leave 3M.Learn more about 3M's creative solutions to the world's problems at ********** or on Instagram, Facebook, and LinkedIn @3M.Responsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties.Safety is a core value at 3M. All employees are expected to contribute to a strong Environmental Health and Safety (EHS) culture by following safety policies, identifying hazards, and engaging in continuous improvement.Pay & Benefits Overview: https://**********/3M/en_US/careers-us/working-at-3m/benefits/3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law. Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly. 3M Global Terms of Use and Privacy Statement Carefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at 3M are conditioned on your acceptance and compliance with these terms. Please access the linked document by clicking here, select the country where you are applying for employment, and review. Before submitting your application, you will be asked to confirm your agreement with the terms.

Multiple Production Operator 📍 Location: Franklin, MA | 🕒 Shift: Multiple Shifts -Full-Time 2nd Shift 15% - Differential & 3rd Shift 22.5% Differential 🏢 Join Our Team at Tegra Medical! We're a trusted contract manufacturer for some of the biggest names in the medical device industry. Known for taking on complex projects that others can't, we pride ourselves on precision and innovation. Headquartered in Franklin, MA, Tegra Medical is part of the global SFS Group, based in Heerbrugg, Switzerland. Together, we're shaping the future of healthcare. If you're passionate about making a difference and want to work on challenging, meaningful projects, check out our open positions and apply today! 📝Your Role: As a Production Operator, you'll play a key part in our daily operations, ensuring products meet quality standards and production goals. You will manufacture medical products/components using manual and/or Laser/CNC/NC machine tools such as mill, lathe, grinder or EDM, applying industry standard machine tool techniques to ensure customer product requirements and Tegra Medical requirements are met. 🛠️ Responsibilities Operate and monitor production equipment. Assemble, inspect, and package finished goods. Follow safety and quality protocols. Collaborate with team members and supervisors 📋 Qualifications High school diploma or equivalent required. Ability to lift up to 50 lbs and stand for extended periods Strong attention to detail and reliability Willingness to work flexible shifts and overtime 🎁 Benefits On-the-job training and advancement opportunities Good hourly wage + shift differentials (2 nd & 3 rd Shift) Great benefits like health, dental, vision, life, and disability insurance; 401K and much more. Paid time off, sick time and holiday pay Employee Assistance Program/ Tuition Reimbursement Tegra Medical is an Equal Opportunity Employer M/F/D/V 📲 How to Apply: Submit your application via our ADP Career Center. 1st shift 7:00am to 3:15pm 2nd shift 3:00pm to 11:115pm - Offers 15% shift differential 3rd shift 11:00pm to 7:15am - Offers 22.5% shift differential

Presser should have the ability to work in a fast-paced environment and have attention to detail. This position will work on the production floor and be trained to operate the robotics and computer system. Company is willing to train a hard working, reliable and honest individual. We offer great benefits, growth potential & training. Benefits include Health Insurance, paid vacation, sick and holidays, 401(k) with matching 3%, employee discount. Starting pay is $16+ based on performance and experience.

The Role As a Production Tech, you'll be an essential part of the process of turning raw cannabis flower into our beautiful line of medicated products. Under the guidance of the management team, you will produce, package, and handle products, perform inventory duties, adhere to compliance requirements, and keep safety as your top priority while working daily in our facility. Here at GTI, we are looking for true team players who are the perfect hybrid between precision and energy. Full time only, M-F 8am-430pm, overtime available occasionally. $18.50/hr, going to $19/hr at 90 days. Responsibilities Deliver on production goals, while focused on safety and quality Produce product per recipes and SOP's, maintaining high quality standards Package product into proper containers with proper labeling to ensure compliance with state regulations Ensure all standards for processing procedures and laboratory protocols are followed Compliance with local and state regulations Adherence to quality control methods throughout entire process Documentation of manufacturing methods are created and maintained Electronically convert packaged products in the state traceability system Manage time efficiently to meet goals while consistently producing quality product Practice good housekeeping habits throughout the facility with focus and personal contributions towards a clean and organized assigned work area at the end of the assigned shift Exhibit competency in basic organizational skills, communication skills and Windows based operating software Use independent judgment regarding product processing, keeping quality and goals in mind Help create a positive environment by having a positive attitude and by being self-motivated Other duties as assigned Qualifications High School Education or GED graduate; some college or college graduate preferred 1-2 years' experience in manufacturing, food processing, warehousing, and/or inventory preferred Equivalent combinations of education and experience may be considered Must be able to work well in a group and independently; demonstrate self-motivation and initiative Must be able to adapt quickly to changes in policy, procedure, and technique Employee must exhibit personal hygiene and follow the health guidelines set forth by GTI Ability to listen well and communicate effectively with various audiences Ability to perform monotonous tasks with great efficiency without losing qualities Must be able to follow basic instructions and accept constructive criticism Prior cannabis experience not required Additional Requirements Must have a valid driver's license or State ID card Must be a minimum of 21 years of age Must pass all required background checks Must be and remain compliant with all legal and company regulations for working in the industry Must be approved by the Cannabis Compliance Board to receive an Agent Card Working Conditions While performing the duties of this job, the employee is regularly required to perform reaching, grasping, bending, stooping, talking, hearing, seeing and repetitive motions. Must be able to sit and/or stand for extended periods of time while maintaining focus. PHYSICAL DEMANDS: Must be able to lift, carry, and balance up to 50 pounds AND must be able to do so with extreme care and caution when working with product. Work involves daily exposure to allergens (such as cannabis, tree nuts, and coconut oil).

Job Title Operator 1 Department Production Reporting to Production Manager Essential Job Duties: To oversee and operate the various packaging equipment Switchback Boxer EconoCorp Boxer & Shanklin Overwrap, Quantum. Set up the Packaging equipment and the packaging lines prior to start-up. Check that the proper products and/or ingredients are being used on the line based on the product being produced and packaged. Perform Packaging equipment changeovers. Monitor and record temperatures of ingredients and products as required. Fill out the “Production- Quality Packaging sheet”. Notify QA, Lead and/ or Supervisor of any production and/or quality issues. Fill out the Downtime report. Notify Lead, Supervisor and /or Maintenance of any mechanical issues or equipment damage. Properly label any raw materials (ingredients) or finished goods that are left over from the run and cover these and store under refrigeration or in freezer. Notify Lead and/or Supervisor of these items. Report any production issues or potential issues to the Lead person and/or Supervisor. Report any quality issues or potential issues to the Quality Tech, Lead person and or QC Supervisor. Report any safety issues or potential issues to the Lead person, Supervisor and/ or Safety Manager. Watch for & report any suspicious activities or unusual observations to authorized personnel. Keep the work area clean and always organized. Troubleshoot minor machine issues and/or notify maintenance of issues that require repair. Complete required paperwork. Complete all other duties assigned by shift supervisor. Essential Job Requirements: Good English skills, able to read and write labels, instructions, and code dates. Bilingual language skills in Portuguese, Creole and/or Spanish a plus. Basic math skills. Excellent communication skills. Leadership skills and able to direct line staff. Work with and mentor Temporary employees. Self-motivated. Mechanical ability. Attention to detail. Able to lift 50lbs and stand on feet for 10-12 hours/day. Able to bend, reach and squat. Work Conditions: Hot and cold temperatures (Hot 80-90F & Cold 35-45F) High noise levels in some areas of the plant. Sudden schedule changes during seasonal volumes. Other Responsibilities: In addition to the above, compliance with all company policies and procedures is mandatory for this position. This job description is intended to be an accurate reflection of the primary job elements and duties of the position, however there may be additional duties and responsibilities deemed necessary by management. Minimum Education & Experience: High School Diploma, GED, 3 years associated experience within the field of packaging or food environment.

Working at Freudenberg: We will wow your world! Responsibilities: Produce/package/label all products to meet or exceed all quality specifications per shop order, QCIC's and all other required documents provided. Operates various manufacturing and measurement equipment in a safe and orderly manner and notifies Lead/Supervisor when operating problems occur or standards cannot be met. Meet or exceed all due dates assigned to the manufacturing shop order. Responsible for all products manufactured. Understanding of documentation system including reading comprehension, writing and how to complete documents accurately. May assist engineering or manufacturing technicians with validation of processes, product and tooling. Understand and follow gowning processes and procedures while maintaining a clean and presentable work station. Physical Requirements: Involves sitting, standing and/or walking, with frequent ability to exert up to 15 pounds of force to move objects and occasionally exert up to 30 pounds of force to move objects. Qualifications: Must have high school diploma or equivalent Manufacturing experience preferred The Freudenberg Group is an equal opportunity employer that is committed to diversity and inclusion. Employment opportunities are available to all applicants and associates without regard to race, color, religion, creed, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity or expression, national origin, ancestry, age, mental or physical disability, genetic information, marital status, familial status, sexual orientation, protected military or veteran status, or any other characteristic protected by applicable law. Freudenberg Medical LLC

The Production Operator will oversee and operate different tools and equipment used in the manufacturing process. The Production Operator focuses on making sure every part of the manufacturing process is functioning effectively, along with ensuring production goals and timelines are met. Duties/Responsibilities: Operating various production machinery and tools. Produces the required quantity of products within established specifications and tolerances Perform quality testing on finished products. Assembling products and parts in manufacturing process. Inspects equipment prior to use to ensure proper set up and alignment; performs basic and routine adjustments and maintenance. Maintains logs and records of units produced including a record of errors resulting in rejected or discarded pieces. Maintains a clean, safe and orderly work area while following health and safety guidelines. Complete all other responsibilities and assignments as required to successfully achieve the goals and objectives of this position. Required Skills/Abilities: Ability to follow directions and work well with a team. Thorough understanding of or the ability to quickly learn production equipment. Strong analytical and problem-solving skills. Understanding of and the ability to abide by applicable OSHA and environmental regulations. Education/ Experience: At least two years of related experience required. Physical Requirements: Prolonged working on feet, using tools, and performing repetitive actions that entail frequent bending and stooping. Must be able to lift up to 50 pounds at a time. Visual acuity to read instructions, operating machines, and inspect parts produced. Core Values Accountable Versatile Knowledgeable Team Oriented Detail Oriented

Shift Options: Day Shift: Monday-Friday, 6:00 AM - 2:30 PM → $22.00/hr We are working with a client hiring Cooks for Cambridge Brands! This is a great opportunity in a food manufacturing environment for individuals with cooking or food prep experience who are looking to grow their career in production. What You'll Do: Mix and blend ingredients used to make nougat Operate kitchen equipment and monitor the cooking process Safely handle raw materials and finished products Follow department procedures and complete production documentation What We're Looking For: At least 1 year of experience in manufacturing or food production Strong basic math skills Attention to detail and ability to follow procedures Reliable, safety-conscious, and team-oriented Apply today - interviews are happening now!

Job Description Job Title: Production Operator with Picker Packer Responsibilities Department: Production Shift: Monday to Friday, 7:00 AM to 3:30 PM (Occasional overtime during peak season) About Us: Upton Tea Imports is dedicated to being the purveyor of the world's finest teas. We're seeking a detail-oriented and motivated individual to join our production team. This role is vital to ensuring our products meet the highest standards of quality and customer satisfaction. Position Summary: As a Production Operator, you will play a key role in packing, picking, and shipping orders. You'll ensure compliance with all GMP and safety policies while maintaining a clean and organized work environment. This position requires teamwork, a strong work ethic, and a focus on quality. Key Responsibilities: Packaging and Labeling: Accurately weigh tea using scales or machines, label packages neatly, and seal bags with precision. Order Fulfillment: Pick products from inventory, pack securely, and prepare shipments with proper labeling and protection for breakables. Quality Control: Maintain ownership of product quality during production. Inventory Management: Move and record inventory, ensuring bin tags are accurate. GMP Compliance: Complete required paperwork and adhere to safety policies. Cross-Training: Support other production areas as needed. Preferred Qualifications: High School Diploma or GED. At least two years of experience in a manufacturing environment. Required Skills and Attributes: Attention to detail and accuracy. Good attendance and reliability. Basic reading and math skills. Ability to stand/walk for a full shift. Team-oriented with the ability to work independently when needed. Strong sense of urgency and accountability. Physical Requirements: Ability to lift up to 50 lbs. several times daily. Push product carts weighing up to 100 lbs. Stand or walk for extended periods. Occasionally climb stairs. Why Join Us? At Upton Tea Imports, you'll be part of a dedicated team that values quality, teamwork, and attention to detail. We offer cross-training opportunities and the chance to work in a clean and safe environment.

Location: North Kingstown, United States of AmericaThales people architect identity management and data protection solutions at the heart of digital security. Business and governments rely on us to bring trust to the billons of digital interactions they have with people. Our technologies and services help banks exchange funds, people cross borders, energy become smarter and much more. More than 30,000 organizations already rely on us to verify the identities of people and things, grant access to digital services, analyze vast quantities of information and encrypt data to make the connected world more secure. Position Summary This is an on-site position in North Kingstown, RI This position is eligible for the Americas referral program for external candidates: Tier 1 - $2500 Referral Bonus. Machine Operator will operate various card production equipment to personalize debit/credit cards according to customers' specifications. Work with other operators, technicians, and supervisory staff to achieve daily / monthly goals. Perform minor equipment maintenance and adjustments per written and oral instructions. Work independently, performing quality inspections on own work according to production standards. Identify potential production and quality problems, recommending remedial, corrective or contingency action. Awareness and compliance with all security and production policies & procedures. Essential Functions / Key Areas of Responsibility Must be able to work in a high-paced environment Operate card production equipment and perform related activities Confirm work receipt Formulate and implement work priority decisions Exceed production output and quality standards Perform minor equipment maintenance and adjustments per written and oral instructions Work independently performing quality inspections on own work to production standards Maintain a clean and orderly work area Identify potential production and quality problems; recommending remedial, corrective or contingency action Work with other operators, technicians and supervisory staff to assist with problems and to an effective work environment Awareness and compliance with all security and production policies/procedures Must possess basic computer skills Maintain housekeeping standards of workstation Order supplies as needed Attend appropriate training and meetings as required Meet safety standards Minimum Requirements High School Diploma or equivalent experience Basic computer skills Basic math skills required Good communication skills in both written and verbal Strong analytical, numerical and reasoning abilities Ability to write routine reports and correspondence Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form Ability to establish credibility and be decisive - but able to recognize and support the organization's preferences and priorities Preferred Qualifications 1-3 years' experience in mechanical ability 1-3 years' experience in safety rules and maintenance instructions Intermediate computer skills Physical Demands Required to be standing and operating a machine 6+ hours a day #LI-Onsite #LI-AS007 This position will require successfully completing a post-offer background check. Qualified candidates with [a] criminal history will be considered and are not automatically disqualified, consistent with federal law, state law, and local ordinances. We are an equal opportunity employer, including disability and veteran status. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you need an accommodation or assistance in order to apply for a position with Thales, please contact us at ************************************. The reference Total Target Compensation (TTC) market range for this position, inclusive of annual base salary and the variable compensation target, is between Total Target Cash (TTC) 35,888.63 - 58,265.40 USD Annual This reflects how companies in a similar industry and geographic region generally pay for similar jobs. This range helps the Company make pay decisions as one data point among many. Where a position falls within this range is also dependent on other factors including - but not limited to - the employee's career path history, competencies, skills and performance, as well as the company's annual salary budget, the customer's program requirements, and the company's internal equity. Thales may offer additional benefits and other compensation, depending on circumstances not related to an applicant's status protected by local, state, or federal law. (For Internal candidate, if you need more information, please reach out to your HR Shared Service, 1st Point) Thales provides an extensive benefits program for all full-time employees working 30 or more hours per week and their eligible dependents, including the following: •Elective Health, Dental, Vision, FSA/HSA, Voluntary Life and AD&D, Whole Group Life w/LTC, Critical Illness, Hospital Indemnity, Accident Insurance, Legal Plan, Identity Theft, and Pet Insurance •Retirement Savings Plan after 30 days of employment with a company contribution and a match, and with no vesting period •Company paid holidays and Paid Time Off •Company provided Life Insurance, AD&D, Disability, Employee Assistance Plan, and Well-being Program

Job Details Division: Nucor Rebar Fabrication Midwest Other Available Locations: N/A Purpose Hours: 10pm - 7:30am Bend, cut, bundle and load reinforcing steel bars in accordance with customer's orders Basic Job Functions: Must adhere to Nucor's safety programs and standards. Demonstrate conduct consistent with Nucor's vision and values. Unload trailers and store material in storage bins. Operate a shearing machine to cut reinforcing steel bars to specific lengths. Operate a bending machine to bend reinforcing steel bars to specified shape. Operate overhead crane to move, assemble and select material to be fabricated or shipped. Operate Fabmatic machine that cuts and bends reinforcing steel bars to specified shapes. Assemble and load orders onto trailers for shipping. Operate power saw for cutting reinforcing steel bars to specified lengths. Operate a spray gun in the application of epoxy touch up or reinforcing steel bars. Maintain the shop or designated area in a clean and safe manner. Assist other employees in any of the above tasks. Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times. Minimum Qualifications: Must be legally authorized to work in the United States without company sponsorship now or in the future Must have a high school diploma, GED or local/state equivalent Physical Demands Some heavy lifting may be necessary Working conditions can be noisy/ dusty/ hot/ cold Special Demands Due to the operating conditions of the position, this is a safety sensitive position Must be able to work overtime when required Must be able to work any shift Nucor is an Equal Opportunity/Affirmative Action Employer - M/F/Disabled/Vets - and a drug - free workplace

Job DescriptionWe are excited to offer an entry-level position for an enthusiastic Racker to join a reputable Electropolishing company in Fall River, MA. This role is a fantastic opportunity for someone looking to gain hands-on experience in a dynamic and supportive environment. Role Overview: The Racker will be responsible for the careful handling and positioning of metal parts onto racks before the electropolishing process. This position plays a crucial role in ensuring the quality and efficiency of the electropolishing process. No previous experience is required, as on-the-job training will be provided. Responsibilities: Accurately place and secure metal parts onto racks according to specific procedures. Inspect parts for defects or damage before the electropolishing process. Work closely with the Electropolishing team to ensure smooth workflow and adherence to production schedules. Maintain a clean and organized work area in compliance with safety guidelines. Perform other duties as assigned to support the electropolishing process. Qualifications: High school diploma or equivalent preferred. Strong attention to detail and ability to follow precise instructions. Good manual dexterity and hand-eye coordination. Ability to stand for extended periods and lift up to 30 pounds. Willingness to learn and work as part of a team. To Apply: Please submit your application, including your resume through this post or on our website at www.acsstaffing.com Hours: Full time - 7am to 3:30pm Pay: $17+ per hour

**Production Operator (2nd Shift) Rockland, MA** **Collaborate with Innovative 3Mers Around the World** Choosing where to start and grow your career has a major impact on your professional and personal life, so it's equally important you know that the company that you choose to work at, and its leaders, will support and guide you. With a variety of people, global locations, technologies and products, 3M is a place where you can collaborate with other curious, creative 3Mers. **This position provides an opportunity to transition from other private, public, government or military experience to a 3M career.** **The Impact You'll Make in this Role** As a Production Operator, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative people around the world. Here, you will make an impact by: + Observing all safety procedures, maintain a clean and safe work area + Applying quality instructions & specifications + Monitoring the production or packing operation to ensure quality objectives are met + Loading/unloading material into & from equipment + Working as a team member through sharing information, problem solving & assisting others **Your Skills and Expertise** To set you up for success in this role from day one, 3M requires (at a minimum) the following qualifications: + Possess a High School Diploma/GED or higher (completed and verified prior to start) from an accredited institution *****Applicants meeting the basic qualifications above may be required to take and pass 3M elected testing as a part of the selection process***** Additional qualifications that could help you succeed even further in this role include: + Minimum one (1) year of plant and/or manufacturing experience in a public, private, government, or military environment + Post-high school education + Basic computer knowledge **Pay & Benefits** + Pay starting at $22.62/hour + New hires start with 3 weeks paid vacation + Health, vision and dental start day one + Employee stock discount + 401K Match of 5% + Our plant operates 24/7 so we have multiple shifts available, including days, evenings, overnights, weekends, 8 hour shifts, 12 hour shifts, etc. _Note - If you are selected for an overnight, evening or weekend shift, you may be brought onto a different shift initially for training purposes before starting on your actual shift._ **Work location:** Onsite - 30 Commerce Rd, Rockland, MA 02370 **Travel: N/A** **Relocation Assistance: N/A** **Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status).** **Supporting Your Well-being** 3M offers many programs to help you live your best life - both physically and financially. To ensure competitive pay and benefits, 3M regularly benchmarks with other companies that are comparable in size and scope. **Chat with Max** For assistance with searching through our current job openings or for more information about all things 3M, visit Max, our virtual recruiting assistant on 3M.com/careers. The starting rate of pay for this position is $22.62 per hour. This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate's relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: *************************************************************** . All US-based 3M full time employees will need to sign an employee agreement as a condition of employment with 3M. This agreement lays out key terms on using 3M Confidential Information and Trade Secrets. It also has provisions discussing conflicts of interest and how inventions are assigned. Employees that are Job Grade 7 or equivalent and above may also have obligations to not compete against 3M or solicit its employees or customers, both during their employment, and for a period after they leave 3M. Learn more about 3M's creative solutions to the world's problems at ********** or on Instagram, Facebook, and LinkedIn @3M. Responsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties. Safety is a core value at 3M. All employees are expected to contribute to a strong Environmental Health and Safety (EHS) culture by following safety policies, identifying hazards, and engaging in continuous improvement. Pay & Benefits Overview: *************************************************************** 3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law. **Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly.** **3M Global Terms of Use and Privacy Statement** Carefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at 3M are conditioned on your acceptance and compliance with these terms. Please access the linked document by clicking here (************************************************************************************************* , select the country where you are applying for employment, and review. Before submitting your application, you will be asked to confirm your agreement with the terms. At 3M we apply science in collaborative ways to improve lives daily as our employees connect with customers all around the world. Learn more about 3M's creative solutions to global challenges at ********** or on Twitter @3M or @3MNews. 3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law.

* Produce/package/label all products to meet or exceed all quality specifications per shop order, QCIC's and all other required documents provided. * Operates various manufacturing and measurement equipment in a safe and orderly manner and notifies Lead/Supervisor when operating problems occur or standards cannot be met. * Meet or exceed all due dates assigned to the manufacturing shop order. * Responsible for all products manufactured. * Understanding of documentation system including reading comprehension, writing and how to complete documents accurately. * May assist engineering or manufacturing technicians with validation of processes, product and tooling. * Understand and follow gowning processes and procedures while maintaining a clean and presentable work station. * * Physical Requirements: * Involves sitting, standing and/or walking, with frequent ability to exert up to 15 pounds of force to move objects and occasionally exert up to 30 pounds of force to move objects. Qualificationsarrow_right * Must have high school diploma or equivalent * Manufacturing experience preferred The Freudenberg Group is an equal opportunity employer that is committed to diversity and inclusion. Employment opportunities are available to all applicants and associates without regard to race, color, religion, creed, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity or expression, national origin, ancestry, age, mental or physical disability, genetic information, marital status, familial status, sexual orientation, protected military or veteran status, or any other characteristic protected by applicable law.