Production worker jobs in Warwick, RI - 459 jobs

Job Title: Production Test Technician II Duration: 06 Months (Possible Extension or Conversion) Pay rate; $24/hr Qualifications: High School Degree or Equivalent 1 - 2 years of related experience Experience working in a lean manufacturing environment a plus Essential Knowledge, Skills And Abilities Have good manual dexterity Computer skills and literacy a plus Strong attention to detail Ability to manage multiple priorities and multiple tasks simultaneously Strong verbal communication skills Enjoy contributing to a diverse manufacturing group Able to embrace change Be a Team Player Must be a highly organized, self-managed individual who works with minimum supervision and the ability to work in a fast-paced environment Able to lift 20 pounds Stand/Sit/Walk 8 hrs a day Responsibilities: Perform a wide variety of mechanical or measurement assembly operations on product components, assemblies or sub-assemblies. Determines and/or follows methods and sequence of operations in performing wiring, component installation, hand soldering, cable assembling, bonding and fitting on assembly units. Make setups and adjustments holding tolerances to blueprint specifications. Essential Duties And Responsibilities Acquires job skills and learns all applicable company policies and procedures. Complete assigned tasks while following manufacturing, schedules, policy and procedures. Normally receives little instruction on daily work. Requires instructions on newly introduced assignments. Act as a champion of the company's Lean and Continuous Improvement programs. Time and attendance are in accordance with company policies, procedures and work area schedule. Complete work orders on schedule to ensure a constant flow of finished product to support customer service levels. Advise management of adverse manufacturing and/or equipment conditions and issues that are affecting production and /or safety. Complete a variety of manufacturing tasks as trained and directed by your supervisor including but not limited to bonding, potting, hand soldering, mechanical assembly. Operate equipment to manufacture parts and materials used in the production of ultrasound transducers. Notify manager of all NCM (non-conforming material). Identify and report all adverse conditions of the facility to management. Evaluation of performance will be based on ability to: Produce quality products in accordance to standards. Meet established standard times for standard operations greater than 80% of the time. Follow all applicable manufacturing procedures and documentation. Follow work order activities established via manufacturing reports. Accurately record labor time to all work order operations into the MRP system. Clean and maintain equipment (including tools and fixtures). Participate in the company's Lean and Continuous Improvement programs. Time and attendance (including the accurate reporting of time and attendance) Maintain work area 5s standards. Work with Team members with mutual respect and understanding. Demonstrate proficiency in at least one stage of manufacturing (bonding, wiring, potting, etc.

Since its inception over a decade ago, CRISPR Therapeutics has transformed from a research-stage company advancing programs in the field of gene editing, to a company with a diverse portfolio of product candidates across a broad range of disease areas including hemoglobinopathies, oncology, regenerative medicine, cardiovascular and rare diseases. The Nobel Prize-winning CRISPR science has revolutionized biomedical research and represents a powerful, clinically validated approach with the potential to create a new class of potentially transformative medicines. To accelerate and expand its efforts, CRISPR Therapeutics has established strategic partnerships with leading companies including Vertex Pharmaceuticals. CRISPR Therapeutics AG is headquartered in Zug, Switzerland, with its wholly-owned U.S. subsidiary, CRISPR Therapeutics, Inc., and R&D operations based in Boston, Massachusetts and San Francisco, California. Position Summary Reporting to the Manufacturing Sr Manager, the Manufacturing Associate will perform manufacturing activities associated with LNP GMP manufacturing within a state-of-the-art manufacturing facility at 33 New York Ave in Framingham, MA. A successful candidate will be responsible for the manufacture of LNP therapies for clinical studies and as a commercial product. This role requires clear communication across multiple departments for the execution of daily activities. The ideal candidate will have experience successfully performing formulated LNP Manufacturing within a GMP environment. Responsibilities Perform clinical / commercial product manufacturing for LNP therapies according to cGMP standards and SOPs including Lipid and RNA Prep, T-Mix, and TFF operations Perform aseptic vial filling, visual inspection, cryopreservation, process reagent formulation, and material kitting. Transfer raw material inside cleanroom suite using sanitizing reagents or equipment. Participates in technology transfer from Process Development to the Manufacturing group. Assist in the life cycle development of Standard Operating Procedures (SOPs) for manufacturing in collaboration with PD / MSAT and Quality Systems groups. Ensures all materials and equipment are identified and available in time for manufacturing operations. Execute standard work per manufacturing schedule Participate in Quality investigations and resolutions. Ensure cGMP compliance through consistent execution. Other duties and projects as assigned to meet departmental requirements. Minimum Qualifications Certificate, associate's degree or higher in biological sciences or related fields and 2-5 years of relevant Manufacturing experience or related fields Available to work a flexible schedule as needed. Ability to don cleanroom garments and work within a classified environment (Grade B and C) Knowledge of GMP and industry standards T-Mix and TFF experience preferred Fluency in Windows and Microsoft Office applications Attentive to detail and accuracy Ability to effectively communicate and collaborate with internal stakeholders is essential Ability to work effectively in a collaborative team environment where results are achieved through influence and the incorporation of multiple points of view. Ability to execute and follow-through to completion Ability to lift 40 pounds Ability to stand for 6 hours in a clean room environment Self-driven, independently motivated, data driven and excellent problem-solving ability Competencies Collaborative - Openness, One Team Undaunted - Fearless, Can-do attitude Results Orientation - Delivering progress toward our mission. Sense of urgency in solving problems. Entrepreneurial Spirit - Proactive. Ownership mindset. Due to the nature of their work, our manufacturing and lab-based positions are located fully on-site. Manufacturing Associate: Base pay range of $35.00 per hour to $42.00 per hour + bonus, equity and benefits. The range provided is CRISPR Therapeutics' reasonable estimate of the base compensation for this role. The actual amount will be based on job-related and non-discriminatory factors such as experience, training, skills, and abilities. CRISPR Therapeutics, Inc. is committed to equal employment opportunity and non-discrimination for all employees and qualified applicants without regard to a person's race, color, gender, age, religion, national origin, ancestry, disability, veteran status, genetic information, sexual orientation or any characteristic protected under applicable law. To view our Privacy Statement, please click the following link: ***********************************************

What's In It For You: Joining our team as a Production Operator offers an opportunity to build a stable and rewarding career in manufacturing. We prioritize a safe, supportive work environment and offer competitive wages and shift differentials to recognize the valuable contributions of our employees. WILL TRAIN! Competitive Compensation: Earn $18/hr, depending on your experience and assigned shift. Comprehensive Benefits: Access to health benefits and an incentive recognition bonus (all benefits are based on eligibility). Career Stability: We value candidates with stable work histories and offer steady employment across multiple shifts (1st, 2nd, and 3rd). We are seeking dedicated and physically capable Production Operators for our Rope Mill facility. Candidates must have a proven track record of stable employment, particularly in a manufacturing or machine operation setting. Shifts: Available shifts are 1st, 2nd and 3rd shift hours available. Responsibilities Include But Are Not Limited To: Efficiently measure, cut, sow and assemble wires. Perform quality checks and inspections on finished and in-process products. Package outgoing orders. Update inventory levels Ensure machines are adequately supplied by replenishing stock. Safely lift and handle heavy supplies, requiring the ability to lift 50 lbs Utilize computer skills for accurate documentation and record-keeping. Maintain excellent attendance and follow all safety and operational protocols while standing for extended periods. Compensation: Pay will be offered based on several factors including the candidate's education, work experience, work location, specific job duties, and certifications, with an expected hourly wage of $18/hr Benefits: We offer comprehensive benefits to include health and an incentive recognition bonus (all benefits are based on eligibility). Skills and Qualifications: A minimum of one year of stable work experience in each of your previous positions. Physical ability to lift 50 lbs Strong foundational skills in reading, writing, and math. Excellent attendance record and the ability to work while standing. Prior Manufacturing (mfg) experience a plus! Trade school experience a plus. Experience reading and using measuring tools (e.g., tape measure, calipers). Ready to Apply? Are you ready to make a difference as a Production Operator? Join our team and take your manufacturing career to the next level. Apply today and take the first step toward a rewarding future. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected veteran status.

The Role As a Production Tech, you'll be an essential part of the process of turning raw cannabis flower into our beautiful line of medicated products. Under the guidance of the management team, you will produce, package, and handle products, perform inventory duties, adhere to compliance requirements, and keep safety as your top priority while working daily in our facility. Here at GTI, we are looking for true team players who are the perfect hybrid between precision and energy. Full time only, M-F 8am-430pm, overtime available occasionally. $18.50/hr, going to $19/hr at 90 days. Responsibilities Deliver on production goals, while focused on safety and quality Produce product per recipes and SOP's, maintaining high quality standards Package product into proper containers with proper labeling to ensure compliance with state regulations Ensure all standards for processing procedures and laboratory protocols are followed Compliance with local and state regulations Adherence to quality control methods throughout entire process Documentation of manufacturing methods are created and maintained Electronically convert packaged products in the state traceability system Manage time efficiently to meet goals while consistently producing quality product Practice good housekeeping habits throughout the facility with focus and personal contributions towards a clean and organized assigned work area at the end of the assigned shift Exhibit competency in basic organizational skills, communication skills and Windows based operating software Use independent judgment regarding product processing, keeping quality and goals in mind Help create a positive environment by having a positive attitude and by being self-motivated Other duties as assigned Qualifications High School Education or GED graduate; some college or college graduate preferred 1-2 years' experience in manufacturing, food processing, warehousing, and/or inventory preferred Equivalent combinations of education and experience may be considered Must be able to work well in a group and independently; demonstrate self-motivation and initiative Must be able to adapt quickly to changes in policy, procedure, and technique Employee must exhibit personal hygiene and follow the health guidelines set forth by GTI Ability to listen well and communicate effectively with various audiences Ability to perform monotonous tasks with great efficiency without losing qualities Must be able to follow basic instructions and accept constructive criticism Prior cannabis experience not required Additional Requirements Must have a valid driver's license or State ID card Must be a minimum of 21 years of age Must pass all required background checks Must be and remain compliant with all legal and company regulations for working in the industry Must be approved by the Cannabis Compliance Board to receive an Agent Card Working Conditions While performing the duties of this job, the employee is regularly required to perform reaching, grasping, bending, stooping, talking, hearing, seeing and repetitive motions. Must be able to sit and/or stand for extended periods of time while maintaining focus. PHYSICAL DEMANDS: Must be able to lift, carry, and balance up to 50 pounds AND must be able to do so with extreme care and caution when working with product. Work involves daily exposure to allergens (such as cannabis, tree nuts, and coconut oil).

Be part of the Stafford Springs team at Thermo Fisher Scientific Inc. to assist in top-tier manufacturing. Your vital role maintains quality and production standards to ensure excellent products. Job Responsibilities Operate production equipment and address mechanical issues Perform quality tests and maintain accurate records Collaborate with team members to ensure smooth operations Keys to Success Achieve flawless execution by strictly adhering to safety and quality protocols, and successfully implementing continuous improvement strategies. Education High school diploma or GED is required Experience Basic knowledge of machinery preferred Experience with production equipment is a plus Familiarity with quality testing Knowledge, Skills, Abilities Basic math skills including use of formulas, decimals, and fractions Knowledge of simple measuring devices Ability to stand continuously for an 8-hour period Physical Requirements / Work Environment This role entails standing for long periods, operating machinery, and handling materials. You must be able to work in a dynamic and sometimes fast-paced environment. Benefits We provide competitive compensation, an annual performance-based bonus scheme, healthcare coverage, and a variety of employee perks. Thermo Fisher Scientific Inc. offers employment opportunities within a progressive, forward-looking company with excellent career growth and development possibilities. Our company fosters a dynamic culture centered on integrity, passion, engagement, and creativity! Compensation and Benefits The hourly pay range estimated for this position based in Connecticut is $16.78-$25.16. This position may also be eligible to receive a variable annual bonus based on company, team, and/or individual performance results in accordance with company policy. We offer a comprehensive Total Rewards package that our U.S. colleagues and their families can count on, which includes: A choice of national medical and dental plans, and a national vision plan, including health incentive programs Employee assistance and family support programs, including commuter benefits and tuition reimbursement At least 120 hours paid time off (PTO), 10 paid holidays annually, paid parental leave (3 weeks for bonding and 8 weeks for caregiver leave), accident and life insurance, and short- and long-term disability in accordance with company policy Retirement and savings programs, such as our competitive 401(k) U.S. retirement savings plan Employees' Stock Purchase Plan (ESPP) offers eligible colleagues the opportunity to purchase company stock at a discount For more information on our benefits, please visit: *****************************************************

**Production Operator (2nd Shift) Rockland, MA** **Collaborate with Innovative 3Mers Around the World** Choosing where to start and grow your career has a major impact on your professional and personal life, so it's equally important you know that the company that you choose to work at, and its leaders, will support and guide you. With a variety of people, global locations, technologies and products, 3M is a place where you can collaborate with other curious, creative 3Mers. **This position provides an opportunity to transition from other private, public, government or military experience to a 3M career.** **The Impact You'll Make in this Role** As a Production Operator, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative people around the world. Here, you will make an impact by: + Observing all safety procedures, maintain a clean and safe work area + Applying quality instructions & specifications + Monitoring the production or packing operation to ensure quality objectives are met + Loading/unloading material into & from equipment + Working as a team member through sharing information, problem solving & assisting others **Your Skills and Expertise** To set you up for success in this role from day one, 3M requires (at a minimum) the following qualifications: + Possess a High School Diploma/GED or higher (completed and verified prior to start) from an accredited institution *****Applicants meeting the basic qualifications above may be required to take and pass 3M elected testing as a part of the selection process***** Additional qualifications that could help you succeed even further in this role include: + Minimum one (1) year of plant and/or manufacturing experience in a public, private, government, or military environment + Post-high school education + Basic computer knowledge **Pay & Benefits** + Pay starting at $22.62/hour + New hires start with 3 weeks paid vacation + Health, vision and dental start day one + Employee stock discount + 401K Match of 5% + Our plant operates 24/7 so we have multiple shifts available, including days, evenings, overnights, weekends, 8 hour shifts, 12 hour shifts, etc. _Note - If you are selected for an overnight, evening or weekend shift, you may be brought onto a different shift initially for training purposes before starting on your actual shift._ **Work location:** Onsite - 30 Commerce Rd, Rockland, MA 02370 **Travel: N/A** **Relocation Assistance: N/A** **Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status).** **Supporting Your Well-being** 3M offers many programs to help you live your best life - both physically and financially. To ensure competitive pay and benefits, 3M regularly benchmarks with other companies that are comparable in size and scope. **Chat with Max** For assistance with searching through our current job openings or for more information about all things 3M, visit Max, our virtual recruiting assistant on 3M.com/careers. The starting rate of pay for this position is $22.62 per hour. This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate's relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: *************************************************************** . All US-based 3M full time employees will need to sign an employee agreement as a condition of employment with 3M. This agreement lays out key terms on using 3M Confidential Information and Trade Secrets. It also has provisions discussing conflicts of interest and how inventions are assigned. Employees that are Job Grade 7 or equivalent and above may also have obligations to not compete against 3M or solicit its employees or customers, both during their employment, and for a period after they leave 3M. Learn more about 3M's creative solutions to the world's problems at ********** or on Instagram, Facebook, and LinkedIn @3M. Responsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties. Safety is a core value at 3M. All employees are expected to contribute to a strong Environmental Health and Safety (EHS) culture by following safety policies, identifying hazards, and engaging in continuous improvement. Pay & Benefits Overview: *************************************************************** 3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law. **Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly.** **3M Global Terms of Use and Privacy Statement** Carefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at 3M are conditioned on your acceptance and compliance with these terms. Please access the linked document by clicking here (************************************************************************************************* , select the country where you are applying for employment, and review. Before submitting your application, you will be asked to confirm your agreement with the terms. At 3M we apply science in collaborative ways to improve lives daily as our employees connect with customers all around the world. Learn more about 3M's creative solutions to global challenges at ********** or on Twitter @3M or @3MNews. 3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law.

Multiple Production Operator 📍 Location: Franklin, MA | 🕒 Shift: Multiple Shifts -Full-Time 2nd Shift 15% - Differential & 3rd Shift 22.5% Differential 🏢 Join Our Team at Tegra Medical! We're a trusted contract manufacturer for some of the biggest names in the medical device industry. Known for taking on complex projects that others can't, we pride ourselves on precision and innovation. Headquartered in Franklin, MA, Tegra Medical is part of the global SFS Group, based in Heerbrugg, Switzerland. Together, we're shaping the future of healthcare. If you're passionate about making a difference and want to work on challenging, meaningful projects, check out our open positions and apply today! 📝Your Role: As a Production Operator, you'll play a key part in our daily operations, ensuring products meet quality standards and production goals. You will manufacture medical products/components using manual and/or Laser/CNC/NC machine tools such as mill, lathe, grinder or EDM, applying industry standard machine tool techniques to ensure customer product requirements and Tegra Medical requirements are met. 🛠️ Responsibilities Operate and monitor production equipment. Assemble, inspect, and package finished goods. Follow safety and quality protocols. Collaborate with team members and supervisors 📋 Qualifications High school diploma or equivalent required. Ability to lift up to 50 lbs and stand for extended periods Strong attention to detail and reliability Willingness to work flexible shifts and overtime 🎁 Benefits On-the-job training and advancement opportunities Good hourly wage + shift differentials (2 nd & 3 rd Shift) Great benefits like health, dental, vision, life, and disability insurance; 401K and much more. Paid time off, sick time and holiday pay Employee Assistance Program/ Tuition Reimbursement Tegra Medical is an Equal Opportunity Employer M/F/D/V 📲 How to Apply: Submit your application via our ADP Career Center. 1st shift 7:00am to 3:15pm 2nd shift 3:00pm to 11:115pm - Offers 15% shift differential 3rd shift 11:00pm to 7:15am - Offers 22.5% shift differential

Job Description The Production Operator will oversee and operate different tools and equipment used in the manufacturing process. The Production Operator focuses on making sure every part of the manufacturing process is functioning effectively, along with ensuring production goals and timelines are met. Duties/Responsibilities: Operating various production machinery and tools. Produces the required quantity of products within established specifications and tolerances Perform quality testing on finished products. Assembling products and parts in manufacturing process. Inspects equipment prior to use to ensure proper set up and alignment; performs basic and routine adjustments and maintenance. Maintains logs and records of units produced including a record of errors resulting in rejected or discarded pieces. Maintains a clean, safe and orderly work area while following health and safety guidelines. Complete all other responsibilities and assignments as required to successfully achieve the goals and objectives of this position. Required Skills/Abilities: Ability to follow directions and work well with a team. Thorough understanding of or the ability to quickly learn production equipment. Strong analytical and problem-solving skills. Understanding of and the ability to abide by applicable OSHA and environmental regulations. Education/ Experience: At least two years of related experience required. Physical Requirements: Prolonged working on feet, using tools, and performing repetitive actions that entail frequent bending and stooping. Must be able to lift up to 50 pounds at a time. Visual acuity to read instructions, operating machines, and inspect parts produced. Core Values Accountable Versatile Knowledgeable Team Oriented Detail Oriented

Job Title Operator 1 Department Production Reporting to Production Manager Essential Job Duties: To oversee and operate the various packaging equipment Switchback Boxer EconoCorp Boxer & Shanklin Overwrap, Quantum. Set up the Packaging equipment and the packaging lines prior to start-up. Check that the proper products and/or ingredients are being used on the line based on the product being produced and packaged. Perform Packaging equipment changeovers. Monitor and record temperatures of ingredients and products as required. Fill out the “Production- Quality Packaging sheet”. Notify QA, Lead and/ or Supervisor of any production and/or quality issues. Fill out the Downtime report. Notify Lead, Supervisor and /or Maintenance of any mechanical issues or equipment damage. Properly label any raw materials (ingredients) or finished goods that are left over from the run and cover these and store under refrigeration or in freezer. Notify Lead and/or Supervisor of these items. Report any production issues or potential issues to the Lead person and/or Supervisor. Report any quality issues or potential issues to the Quality Tech, Lead person and or QC Supervisor. Report any safety issues or potential issues to the Lead person, Supervisor and/ or Safety Manager. Watch for & report any suspicious activities or unusual observations to authorized personnel. Keep the work area clean and always organized. Troubleshoot minor machine issues and/or notify maintenance of issues that require repair. Complete required paperwork. Complete all other duties assigned by shift supervisor. Essential Job Requirements: Good English skills, able to read and write labels, instructions, and code dates. Bilingual language skills in Portuguese, Creole and/or Spanish a plus. Basic math skills. Excellent communication skills. Leadership skills and able to direct line staff. Work with and mentor Temporary employees. Self-motivated. Mechanical ability. Attention to detail. Able to lift 50lbs and stand on feet for 10-12 hours/day. Able to bend, reach and squat. Work Conditions: Hot and cold temperatures (Hot 80-90F & Cold 35-45F) High noise levels in some areas of the plant. Sudden schedule changes during seasonal volumes. Other Responsibilities: In addition to the above, compliance with all company policies and procedures is mandatory for this position. This job description is intended to be an accurate reflection of the primary job elements and duties of the position, however there may be additional duties and responsibilities deemed necessary by management. Minimum Education & Experience: High School Diploma, GED, 3 years associated experience within the field of packaging or food environment.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency (“RF”) components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards (“PCB”s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at *********** Why Join Us? At TTM, we believe in offering our employees an environment where they can make a real impact on the work we do. Here's a look at what we provide our employees to set them up for success. Career Development: We invest in your growth - our Operator Advancement Program supports your goals. We provide operators and assemblers at all levels the opportunity to certify their skills and build their career with us up to 3 times a year by applying to the OAP program. TTM promoted 68% of applicants in the program's first year! Competitive Compensation: We offer a competitive package that reflects your skills and experience along with annual compensation reviews to ensure your growth is aligned with your performance and market trends. Comprehensive Benefits and PTO: Including health, dental, and vision insurance to keep you at your best. Enjoy 10 paid holidays and 3 weeks of paid time off annually to recharge. TTM strives to invest in our team members at all levels, starting on your first day. To support the growth and development of new hires, this position is eligible for a 90 Day Evaluation that includes a pay increase if key performance indicators are met. Scope: This position is responsible to prep and manually apply coatings to printed circuit boards. Must be able to use a spray booth to coat. Applicant must be able to handle a fast paced environment with a high volume workload. Duties and Responsibilities: Prepare boards for conformal coat by cleaning items and surfaces to be finished. Mask connectors and other objects on the board. Work with hand, pneumatic and electric hand tools. Mix chemicals according to manufacturer's specifications. Apply epoxy and conformal coatings using dispensing equipment. Visually check work in process for defects and makes adjustments as required. Comprehend and follow instructions, read and understand blueprints. Communicate regularly to supervisor/managers. Work effectively and responsibly with others. Maintain cleanliness of the work area. Works effectively and responsibly with others. All other assigned duties as required within the production organization. Regular attendance is an essential job function for this position. Comply with ITAR/Export Compliance requirements. Note: The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer. Essential Knowledge and Skills: General knowledge and use of industrial ovens, scales and simple meters used for recording data desired. Use and knowledge of two part epoxies and chemicals. Good English skills, able to read, write and speak clearly. Good computer skills. Ability to understand printed circuit board assembly; including reading assembly drawings and written work instructions. Ability to pass eye exam with a minimum 20/20 vision that may be corrected via eyeglasses or contact lenses as required. Eye exam is required annually. Ability to work up to 10 hours a day, 5 days a week and is flexible to work up to 10 hours a day, 5 days a week and weekends if necessary. The ability to work extra hours at the company's request due to business needs is mandatory. Ability to lift up to 25 lbs. Good manual dexterity, attention to detail, reading vision: ability to sit/stand for up to 10 hours Ability to work with limited supervision, produce quality product consistently within time standards. Education and Experience: Education: High School Diploma or equivalent. Required Experience: 1 Year Manufacturing Experience. #LI-KR1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401K, Flexible Spending Account, Health Savings Account, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available 1st of the month following date of hire. Compensation for roles at TTM Technologies varies depending on a wide array of factors including but not limited to the specific office location, role, skill set and level of experience. As required by local law, TTM provides a reasonable range of compensation for roles that my be hired in New York, California and Colorado. For California-based roles, compensation ranges are based upon specific physical locations. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at *********** Why Join Us? At TTM, we believe in offering our employees an environment where they can make a real impact on the work we do. Here's a look at what we provide our employees to set them up for success. * Career Development: We invest in your growth - our Operator Advancement Program supports your goals. We provide operators and assemblers at all levels the opportunity to certify their skills and build their career with us up to 3 times a year by applying to the OAP program. TTM promoted 68% of applicants in the program's first year! * Competitive Compensation: We offer a competitive package that reflects your skills and experience along with annual compensation reviews to ensure your growth is aligned with your performance and market trends. * Comprehensive Benefits and PTO: Including health, dental, and vision insurance to keep you at your best. Enjoy 10 paid holidays and 3 weeks of paid time off annually to recharge. TTM strives to invest in our team members at all levels, starting on your first day. To support the growth and development of new hires, this position is eligible for a 90 Day Evaluation that includes a pay increase if key performance indicators are met. Scope: This position is responsible to prep and manually apply coatings to printed circuit boards. Must be able to use a spray booth to coat. Applicant must be able to handle a fast paced environment with a high volume workload. Duties and Responsibilities: * Prepare boards for conformal coat by cleaning items and surfaces to be finished. Mask connectors and other objects on the board. * Work with hand, pneumatic and electric hand tools. * Mix chemicals according to manufacturer's specifications. * Apply epoxy and conformal coatings using dispensing equipment. * Visually check work in process for defects and makes adjustments as required. * Comprehend and follow instructions, read and understand blueprints. * Communicate regularly to supervisor/managers. * Work effectively and responsibly with others. * Maintain cleanliness of the work area. * Works effectively and responsibly with others. * All other assigned duties as required within the production organization. * Regular attendance is an essential job function for this position. * Comply with ITAR/Export Compliance requirements. Note: The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer. Essential Knowledge and Skills: * General knowledge and use of industrial ovens, scales and simple meters used for recording data desired. Use and knowledge of two part epoxies and chemicals. * Good English skills, able to read, write and speak clearly. Good computer skills. * Ability to understand printed circuit board assembly; including reading assembly drawings and written work instructions. * Ability to pass eye exam with a minimum 20/20 vision that may be corrected via eyeglasses or contact lenses as required. Eye exam is required annually. * Ability to work up to 10 hours a day, 5 days a week and is flexible to work up to 10 hours a day, 5 days a week and weekends if necessary. The ability to work extra hours at the company's request due to business needs is mandatory. * Ability to lift up to 25 lbs. Good manual dexterity, attention to detail, reading vision: ability to sit/stand for up to 10 hours * Ability to work with limited supervision, produce quality product consistently within time standards. Education and Experience: Education: * High School Diploma or equivalent. Required Experience: * 1 Year Manufacturing Experience. #LI-KR1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401K, Flexible Spending Account, Health Savings Account, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available 1st of the month following date of hire. Compensation for roles at TTM Technologies varies depending on a wide array of factors including but not limited to the specific office location, role, skill set and level of experience. As required by local law, TTM provides a reasonable range of compensation for roles that my be hired in New York, California and Colorado. For California-based roles, compensation ranges are based upon specific physical locations. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

Shift Options: Day Shift: Monday-Friday, 6:00 AM - 2:30 PM → $22.00/hr We are working with a client hiring Cooks for Cambridge Brands! This is a great opportunity in a food manufacturing environment for individuals with cooking or food prep experience who are looking to grow their career in production. What You'll Do: Mix and blend ingredients used to make nougat Operate kitchen equipment and monitor the cooking process Safely handle raw materials and finished products Follow department procedures and complete production documentation What We're Looking For: At least 1 year of experience in manufacturing or food production Strong basic math skills Attention to detail and ability to follow procedures Reliable, safety-conscious, and team-oriented Apply today - interviews are happening now!

Job DescriptionBenefits: 11 Paid Holidays Paid On the Job Training 401(k) Bonus based on performance Company parties Free uniforms Paid time off Parental leave Training & development Job Title: Production Operator Reports To: Production Manager FLSA Status: Non-Exempt Department: Production (1st Shift) Location: Putnam, CT At John M. Dean Co. we make products most people take for granted. With products like miniature drive shafts, dowel pins, hand tools, sports accessories, and even antique phonograph needles, were a manufacturer of a diverse range of wire based products that keep the world moving. Since 1898 J.M. Dean has been serving industries like textiles, military/defense, hobbyists, agriculture, and much more. We are one of the largest pointed wire and pin manufacturers in North America. Located in the quiet corner of Connecticut, our Putnam facility has over 27,000 sq. ft. of manufacturing space. Were growing and looking for the right candidate to join or dedicated team. The ideal person will need to be self-driven, always looking for ways to pitch in and help move business forward. A person new to industry and looking to learn many new skills, but who is also capable of self-learning would be a great fit! If you're a mechanically inclined individual who likes making things and love the satisfaction of producing quality workmanship, this is the job for you. This is a unique position you won't find anywhere else! Our talented machine operators are hopeful we can find the new wave of professionals to pass on their knowledge to. Are you the right person for this? Joining our team means joining our family. Come be part of our history, but more importantly our future. See more of what we do by visiting us ******************* Essential Duties and Responsibilities include the following. Other duties may be assigned. *** MUST BE A MOTIVATED AND ENERGETIC PERSON EAGER TO LEARN! *** IF YOU ARE NOT WILLING TO STAY OFF YOUR CELL PHONE AND LEARN A NEW SKILL, PLEASE DO NOT APPLY. Summary: The Production Operator is tasked with operating John M. Dean Co. process equipment to enable the forming of raw wire into a finished product for our customers. This equipment includes (but is not limited to) straightening and cutting machinery, grinding equipment, mechanical presses, final cut machines, bending fixtures, heat treating furnaces and tempering ovens, barrel tumblers (wet and dry process), sorting fixtures, assembly fixtures, hand trucks, media separators, hoists, and other equipment to support the flow of product through the metal finishing process. Additionally, a variety of hand tools may be used during a normal shift, such as transfer shovels, brooms, pick tools, screwdrivers, wrenches, and other miscellaneous tools to support the uptime of machinery, and to promote a clean working environment. Job functions include: Read and understand job routers/travelers and instructions for the purpose of completing jobs. Operate various equipment such as listed above in the summary. Use material handling equipment such as hand trucks and media trucks to move product within the facility. Perform preventive maintenance for manufacturing equipment and facilities related equipment. This includes: Lubricating gearboxes, bearings, and pinion gear sets periodically. Cleaning of dust/debris from the equipment and work area daily. Visual inspection of equipment prior to and during operation. Monitor operation of equipment and make recommendations for reactive maintenance to the Production Manager. Utilize measurement equipment such as micrometer, caliper, and 6" scale. Ensuring all product is manufactured per the documented requirements. Requirements: 1+ year(s) experience in a manufacturing environment as an equipment operator or other mechanical discipline. Previous machining experience is not required but is preferred. Ability to read and understand/interpret documents such as safety rules, operating and maintenance instructions, and customer related documents such as instructions on job routers, prints, production records, and customer prints. Must be able to use a caliper, micrometer, optical comparator, protractor, and other necessary inspection tools (Metric and Standard/SAE). Must read, write, and comprehend English as a primary language. Must be able to count, add, subtract, multiply, divide, and perform other basic math skills. Work Environment: While performing the duties of this job, the employee is regularly exposed to work near moving mechanical parts, airborne particles, loud sustained noise, vibration, and pressurized systems. PPE (safety glasses, hearing protection, gloves, etc.) are provided. Physical Demands: Must be able to stand and/or sit for extended periods of time. The employee must be able to lift and/or move up to 40 pounds unassisted, 80 pounds assisted. Must be able to operate machinery such as pallet jack, hand truck, hoist, and other common material handling equipment as needed. Salary: Hourly rate based on experience. We are willing to pay for good people! Job Type: Full-time Pay: From $18.00 per hour (commensurate with experience) Expected hours: 40 per week Benefits: 401(k) On-the-job training Paid time off Retirement plan Schedule: 8 hour shift Monday to Friday Application Question(s): Are you willing to work hard, show up each day, and learn a rare skill? Experience: Calipers, micrometer, scale: 1 year (Required) Manufacturing: 1 year (Required) Ability to Commute: Putnam, CT 06260 (Required) Ability to Relocate: Putnam, CT 06260: Relocate before starting work (Required) Work Location: In person

$500 Retention Bonus after 90 day!! Additional $500 after 180 day!! Benefits after 30 Days! As a Machine Operator with HMI, you will learn the unique trade of glass manufacturing. This role combines the skills and ability of a person who is mechanically inclined with an artistic edge which sets our product apart from the rest. If you are interested in learning and advancing with a company who cares about our employees, HMI is the home for you. Duties and Responsibilities Responsible for learning all tasks associated with assigned tempering production line station. Assists in maintaining paperwork that was placed on the glass during the cutting process and keeps it in order to ensure it returns to the correct piece of glass. Performs inspections on all glass as it is moved from each machine to check for quality issues. If quality issues are discovered, follows procedure to have issue(s) assessed by an authorized individual. Assists with keeping the floor clean of tripping hazards and mops up water puddles as needed. Assists as needed in other departmental functions and housekeeping duties. Ensures working environment is clean and safe. All other duties as assigned. Required Skills/Abilities: Ability to read a tape measure and identify written measurements. Operates machinery including saws, drills, and power tools. Strong attention to detail and excellent problem-solving skills. Ability to work well with team and under pressure. Physical Demands: While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands to lift, handle, or feel; use finger(s) to push buttons; and reach with hands and arms. The position involves frequent walking, pushing, pulling, and lifting glass panels up to 75lbs repeatedly and stand for an 8-10 hour shift or until all orders are completed for the day. Work Environment: While performing the duties of this job, the employee is frequently exposed to water, moving mechanical parts, and vibration. The noise level in the work environment can be loud. Production facility is not climate controlled. Required Education: High School Diploma or GED Required Experience: None. Warehouse and/or construction background a plus.

Job Description Job Title: Production Operator with Picker Packer Responsibilities Department: Production Shift: Monday to Friday, 7:00 AM to 3:30 PM (Occasional overtime during peak season) About Us: Upton Tea Imports is dedicated to being the purveyor of the world's finest teas. We're seeking a detail-oriented and motivated individual to join our production team. This role is vital to ensuring our products meet the highest standards of quality and customer satisfaction. Position Summary: As a Production Operator, you will play a key role in packing, picking, and shipping orders. You'll ensure compliance with all GMP and safety policies while maintaining a clean and organized work environment. This position requires teamwork, a strong work ethic, and a focus on quality. Key Responsibilities: Packaging and Labeling: Accurately weigh tea using scales or machines, label packages neatly, and seal bags with precision. Order Fulfillment: Pick products from inventory, pack securely, and prepare shipments with proper labeling and protection for breakables. Quality Control: Maintain ownership of product quality during production. Inventory Management: Move and record inventory, ensuring bin tags are accurate. GMP Compliance: Complete required paperwork and adhere to safety policies. Cross-Training: Support other production areas as needed. Preferred Qualifications: High School Diploma or GED. At least two years of experience in a manufacturing environment. Required Skills and Attributes: Attention to detail and accuracy. Good attendance and reliability. Basic reading and math skills. Ability to stand/walk for a full shift. Team-oriented with the ability to work independently when needed. Strong sense of urgency and accountability. Physical Requirements: Ability to lift up to 50 lbs. several times daily. Push product carts weighing up to 100 lbs. Stand or walk for extended periods. Occasionally climb stairs. Why Join Us? At Upton Tea Imports, you'll be part of a dedicated team that values quality, teamwork, and attention to detail. We offer cross-training opportunities and the chance to work in a clean and safe environment.

Job Details Division: Nucor Rebar Fabrication Midwest Other Available Locations: N/A Purpose Hours: 10pm - 7:30am Bend, cut, bundle and load reinforcing steel bars in accordance with customer's orders Basic Job Functions: Must adhere to Nucor's safety programs and standards. Demonstrate conduct consistent with Nucor's vision and values. Unload trailers and store material in storage bins. Operate a shearing machine to cut reinforcing steel bars to specific lengths. Operate a bending machine to bend reinforcing steel bars to specified shape. Operate overhead crane to move, assemble and select material to be fabricated or shipped. Operate Fabmatic machine that cuts and bends reinforcing steel bars to specified shapes. Assemble and load orders onto trailers for shipping. Operate power saw for cutting reinforcing steel bars to specified lengths. Operate a spray gun in the application of epoxy touch up or reinforcing steel bars. Maintain the shop or designated area in a clean and safe manner. Assist other employees in any of the above tasks. Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times. Minimum Qualifications: Must be legally authorized to work in the United States without company sponsorship now or in the future Must have a high school diploma, GED or local/state equivalent Physical Demands Some heavy lifting may be necessary Working conditions can be noisy/ dusty/ hot/ cold Special Demands Due to the operating conditions of the position, this is a safety sensitive position Must be able to work overtime when required Must be able to work any shift Nucor is an Equal Opportunity/Affirmative Action Employer - M/F/Disabled/Vets - and a drug - free workplace

When you join us at Thermo Fisher Scientific, you'll be part of an inquisitive team that shares your passion for exploration and discovery. With revenues of more than $40 billion and the largest investment in R&D in the industry, we give our people the resources and chances to create significant contributions to the world. Stafford CT/FSD Join our outstanding team in Stafford Springs, CT. Contribute to top-tier manufacturing in an encouraging atmosphere. Discover Impactful Work At Thermo Fisher Scientific, you will play a pivotal role in maintaining quality and production standards, ensuring our products meet the highest levels of excellence. A day in the Life Operate production equipment and address mechanical issues Perform quality tests and maintain accurate records Collaborate with team members to ensure smooth operations Keys to Success Achieve flawless execution by strictly adhering to safety and quality protocols, and successfully implementing continuous improvement strategies. Education High school diploma or equivalent experience required. Experience Basic knowledge of machinery preferred. Experience with production equipment is a plus. Familiarity with quality testing. Knowledge, Skills, Abilities Basic math skills including use of formulas, decimals, and fractions. Knowledge of simple measuring devices. Ability to stand continuously for an 8-hour period. Physical Requirements / Work Environment This role entails standing for long periods, operating machinery, and handling materials. You must be able to work in a dynamic and sometimes fast-paced environment. Benefits We offer competitive remuneration, annual incentive plan bonus, healthcare, and a range of employee benefits. Thermo Fisher Scientific offers employment with an innovative, forward-thinking organization, and outstanding career and development prospects. We offer an exciting company culture that stands for integrity, intensity, involvement, and innovation! Compensation and Benefits The hourly pay range estimated for this position based in Connecticut is $15.26-$22.88. This position may also be eligible to receive a variable annual bonus based on company, team, and/or individual performance results in accordance with company policy. We offer a comprehensive Total Rewards package that our U.S. colleagues and their families can count on, which includes: A choice of national medical and dental plans, and a national vision plan, including health incentive programs Employee assistance and family support programs, including commuter benefits and tuition reimbursement At least 120 hours paid time off (PTO), 10 paid holidays annually, paid parental leave (3 weeks for bonding and 8 weeks for caregiver leave), accident and life insurance, and short- and long-term disability in accordance with company policy Retirement and savings programs, such as our competitive 401(k) U.S. retirement savings plan Employees' Stock Purchase Plan (ESPP) offers eligible colleagues the opportunity to purchase company stock at a discount For more information on our benefits, please visit: *****************************************************

Production Operator (2nd Shift) Rockland, MA Collaborate with Innovative 3Mers Around the World Choosing where to start and grow your career has a major impact on your professional and personal life, so it's equally important you know that the company that you choose to work at, and its leaders, will support and guide you. With a variety of people, global locations, technologies and products, 3M is a place where you can collaborate with other curious, creative 3Mers. This position provides an opportunity to transition from other private, public, government or military experience to a 3M career. The Impact You'll Make in this Role As a Production Operator, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative people around the world. Here, you will make an impact by: Observing all safety procedures, maintain a clean and safe work area Applying quality instructions & specifications Monitoring the production or packing operation to ensure quality objectives are met Loading/unloading material into & from equipment Working as a team member through sharing information, problem solving & assisting others Your Skills and Expertise To set you up for success in this role from day one, 3M requires (at a minimum) the following qualifications: Possess a High School Diploma/GED or higher (completed and verified prior to start) from an accredited institution ***Applicants meeting the basic qualifications above may be required to take and pass 3M elected testing as a part of the selection process*** Additional qualifications that could help you succeed even further in this role include: Minimum one (1) year of plant and/or manufacturing experience in a public, private, government, or military environment Post-high school education Basic computer knowledge Pay & Benefits Pay starting at $22.62/hour New hires start with 3 weeks paid vacation Health, vision and dental start day one Employee stock discount 401K Match of 5% Our plant operates 24/7 so we have multiple shifts available, including days, evenings, overnights, weekends, 8 hour shifts, 12 hour shifts, etc. Note - If you are selected for an overnight, evening or weekend shift, you may be brought onto a different shift initially for training purposes before starting on your actual shift. Work location: Onsite - 30 Commerce Rd, Rockland, MA 02370 Travel: N/A Relocation Assistance: N/A Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status). Supporting Your Well-being 3M offers many programs to help you live your best life - both physically and financially. To ensure competitive pay and benefits, 3M regularly benchmarks with other companies that are comparable in size and scope. Chat with Max For assistance with searching through our current job openings or for more information about all things 3M, visit Max, our virtual recruiting assistant on 3M.com/careers. The starting rate of pay for this position is $22.62 per hour. This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate's relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: *************************************************************** All US-based 3M full time employees will need to sign an employee agreement as a condition of employment with 3M. This agreement lays out key terms on using 3M Confidential Information and Trade Secrets. It also has provisions discussing conflicts of interest and how inventions are assigned. Employees that are Job Grade 7 or equivalent and above may also have obligations to not compete against 3M or solicit its employees or customers, both during their employment, and for a period after they leave 3M.Learn more about 3M's creative solutions to the world's problems at ********** or on Instagram, Facebook, and LinkedIn @3M.Responsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties.Safety is a core value at 3M. All employees are expected to contribute to a strong Environmental Health and Safety (EHS) culture by following safety policies, identifying hazards, and engaging in continuous improvement.Pay & Benefits Overview: https://**********/3M/en_US/careers-us/working-at-3m/benefits/3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law. Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly. 3M Global Terms of Use and Privacy Statement Carefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at 3M are conditioned on your acceptance and compliance with these terms. Please access the linked document by clicking here, select the country where you are applying for employment, and review. Before submitting your application, you will be asked to confirm your agreement with the terms.

The Production Operator will oversee and operate different tools and equipment used in the manufacturing process. The Production Operator focuses on making sure every part of the manufacturing process is functioning effectively, along with ensuring production goals and timelines are met. Duties/Responsibilities: Operating various production machinery and tools. Produces the required quantity of products within established specifications and tolerances Perform quality testing on finished products. Assembling products and parts in manufacturing process. Inspects equipment prior to use to ensure proper set up and alignment; performs basic and routine adjustments and maintenance. Maintains logs and records of units produced including a record of errors resulting in rejected or discarded pieces. Maintains a clean, safe and orderly work area while following health and safety guidelines. Complete all other responsibilities and assignments as required to successfully achieve the goals and objectives of this position. Required Skills/Abilities: Ability to follow directions and work well with a team. Thorough understanding of or the ability to quickly learn production equipment. Strong analytical and problem-solving skills. Understanding of and the ability to abide by applicable OSHA and environmental regulations. Education/ Experience: At least two years of related experience required. Physical Requirements: Prolonged working on feet, using tools, and performing repetitive actions that entail frequent bending and stooping. Must be able to lift up to 50 pounds at a time. Visual acuity to read instructions, operating machines, and inspect parts produced. Core Values Accountable Versatile Knowledgeable Team Oriented Detail Oriented