Project engineer jobs in Elyria, OH - 879 jobs

Who is IC? Independence Construction is one of the largest CM businesses headquartered in Northeast Ohio. As part of the DiGeronimo Companies, we offer our clients self-perform services through our affiliated companies, as well as bring an owner's approach to projects through the company's work as a developer. We bring our experience and reputation for honesty, integrity, and outstanding performance to the world of design and management in order to ensure the best results for our partners, subcontractors, and community. What do we believe in? PEOPLE: Provide a safe, family-oriented environment. Commitment to integrity. Protect our most valuable assets. PERFORMANCE: Always deliver the highest quality. Find solutions. Provide value to our partners. COMMUNITY: Positively impact the communities we serve. Give back. Leave the world a better place than we found it. As a Project Engineer, your key responsibilities are to assist the project manager and/or superintendent in one or more aspects of a construction project. Coordination with Subs, vendors, suppliers, and Independence Construction project team. Administer and monitor compliance with construction contracts with Owners, subcontractors and vendors. Coordinate and expedite materials and services for the job site, in conjunction with superintendent. Schedule and manage meetings throughout each phase of construction and preconstruction. Assist the PM with the management of Project Budget, Budget Revisions, Cost Projections, and Cash Flow Projections. Assist with the generation of reports. Review and coordinate structural, architectural and MEP drawings throughout the project. Assist PM in the oversight and management of change management processes. Collect and analyze the trade contractor proposal for scope changes. Review and negotiate the cost for the change in scope to ensure the pricing is accurate and fair for the change in work. Log the change management to the correct cost codes. Issue the subcontract change order upon approval of the change by Owner and PM. Responsible for the entire RFI process (initiate, review the response, maintain a log and distribute to team as appropriate. Responsible for the entire submittal process (initiate, review the submittal, maintain a log and distribute to team as appropriate upon approvals. Responsible to keep accurate and current at all times the drawing log, submittal log, and RFI log. Coordinate all project meetings with PM and Superintendent prior to the start of project. Attend Owner / Architect / CM (Contractor) meetings. Collect, review and process subcontractor payment applications as assigned by the PM. Assist in compiling owner payment applications. Assist the Superintendent and PM as requested in creating and updating the Master Schedule. Quality Control and Quality Assurance - Work with the team (PM, PX, Supt.) for the development of the project QA/QC program. Assist PM and Superintendent with Close-out process. Assist with the preliminary punch list process. Coordinate owner-requested warranty requirements during the warranty period. Do you have what it takes? Bachelor's degree in construction management or engineering or equivalent combination of education and experience. 2-5 years of previous related experience is required Strong written and oral communication skills. Knowledge of budgeting and expense control. Able to write reports, and business correspondence. Able to organize work, engage in a variety of tasks simultaneously and consistently meet deadlines. Able to perform duties independently. Computer skills: Microsoft Office applications. Strong attention to detail.

Our client is expanding two high-growth product lines that protect critical environments for life-science, healthcare, and advanced-manufacturing customers. They need a hands-on Mechanical Engineer who loves seeing designs move from 3-D model to factory floor to finished installation. If you thrive on variety - custom equipment one week, supplier negotiations the next, and a quick site visit to verify fit-up - you'll feel right at home. What You'll Do Own mechanical design of custom modular enclosures, precision access doors, and related sub-systems in SolidWorks and Revit, delivering complete models, drawings, and BOMs. Produce manufacturable drawings, costed BOMs, and clear assembly instructions that hit quality and lead-time targets. Run FEA-based structural, vibration, and thermal studies to validate safety and performance. Source & track specialty hardware - hinges, seals, actuators, filtration interfaces - working closely with purchasing and key vendors. Coordinate with architecture, electrical, and controls teams plus outside design firms to integrate your work into overall facility layouts. Lead design-for-manufacture and continuous-improvement projects that boost throughput, reliability, and margins. Provide on-site support during fabrication, installation, and commissioning at both Midwest and Southeast facilities (≈10-15 % travel). Maintain CAD libraries, engineering change documentation, and best-practice design standards in the PLM system. What You'll Bring Bachelor's degree in mechanical engineering (or similar). 5 + years designing custom equipment, enclosures, or capital projects. Expert with SolidWorks (or comparable 3-D CAD) and comfortable integrating models into Autodesk Revit/AutoCAD plant layouts. Working knowledge of machining, sheet-metal, welding, and general fabrication processes. Familiarity with FEA tools; able to interpret standards, specs, and codes. Strong communication skills for vendor, cross-discipline, and client coordination. Organized, self-directed, and motivated by continuous improvement. Bonus Points PLM or PDM experience. Familiarity with environments requiring precise controls, such as radiation containment or contamination-free production settings. Experience guiding junior engineers or external design partners. Benefits Snapshot Competitive base salary, discretionary bonus, and full health benefits. Relocation assistance for the right candidate. Career path toward senior engineering or project-management leadership. Work with a nimble team that values innovation, craftsmanship, and getting things done. About Blue Signal: Blue Signal is a leading executive search firm, specializing in engineering recruitment. Our engineering recruiting team has expertise placing high-performing talent in areas such as electrical, mechanical, civil, and telecom engineering. Learn more at bit.ly/46IAFRJ

The Horsburgh & Scott Company is a leading manufacturer of industrial gears and custom gear drives, with 140 years of engineering and manufacturing expertise. Our commitment to quality and innovation ensures that we deliver the highest quality gearing products and services to our customers. To learn more about our Company and capabilities, visit our website at Horsburgh & Scott | Gear Manufacturer and Gearbox Repair. Primary Job Functions: Perform engineering functions for custom design products. These functions will include (but are not limited to: Gear tooth geometry analysis and ratings. Shaft deflection analysis. Bearing life analysis and selection. Lubrication system design. Housing design. Gear drive layout. Assembly and testing notes. Review and approve drawings from designer detailers for release to the shop. Enter requisition text for major raw material items into BaaN system for purchase. Secondary Job Functions: Point contact for technical communications (post order) with customers and sales personnel. Disposition Nonconforming Material Reports (NMR's). Issue Engineering Change Notices (ECN's) when appropriate. Support shop / assembly when questions or issues come up. Create detail drawings when necessary. Other functions as required by management. Qualifications: B.S. Mechanical Engineering. Minimum of five years' experience in linear/rotational machine design a must (experience within gear industry preferred). 3-D modeling experience, Solid Works experience a plus. Able to read and understand machine drawings. BaaN (ERP System) experience a plus. Microsoft Office applications. Strong verbal and written communication skills. Creative thinker and problem solver. Capable of managing multiple priorities. Participate in H&S Safety program. Able to perform the essential functions of the position with or without accommodation.

Seeking an Automation / Controls Engineer with hands-on experience in PLC, SCADA, HMI, or Robotics to support industrial automation systems. The role involves programming, troubleshooting, and supporting automated equipment in manufacturing or industrial environments. Responsibilities: PLC programming and automation support SCADA/HMI configuration and troubleshooting Support robotics or automated systems (as applicable) System testing, commissioning, and documentation Requirements: 3+ years in Automation / Controls Engineering Experience with PLC-based systems Exposure to SCADA, HMI, or Robotics Engineering background (Electrical / Electronics / Mechanical)

Title: Senior Plant Project Engineer Duration: Permanent Must have: Bachelor's Degree in an Engineering field (Mechanical, Industrial, Chemical preferred) Experienced planning, executing, and monitoring small to medium-sized ($5,000-$5M+) projects from conception through to completion. Chemical, Industrial, Combustion, Heating, or Cooling background Construction and safety-oriented AutoCAD experience creating high-level drawings Nice to have: Experienced with Incineration or Hazardous Waste Treatment, Storage and Disposal Facilities (TSDFs) Experience with safety and environmental compliance as related to chemical operations Day to day: We are looking for a talented Plant Project Engineer to join our team at Ross Incineration Services. This person will be planning, executing, and monitoring projects pertaining to the addition or replacement of tanks, pumps, air pollution control equipment, buildings, and other infrastructure. A successful candidate will be hands-on and be heavily involved throughout the course of the projects working closely with operations, maintenance, and contractors. The current team consists of 5 engineers of various disciplines and this role will report directly to the Engineering Technology Manager. This role will also be involved in safety and compliance, including the Mandatory Safety and Incentive Program initiatives, EHS Policy and Procedures, etc.

Multi-Family Construction/Development Group currently seeking a Project Manager. This position will report to the Vice President of Construction. Responsibilities include, but are not limited to: Partner with the Construction Executive in interacting with subcontractors Partner with the Construction Executive in the drafting of client proposals Partner with the Construction Executive on contract administration and management Work with preconstruction, estimating and scheduling on project estimate and schedule Provide direction to the project team to complete the projects safe and on time Perform on-site Project Manager duties on small scope projects Qualifications include: BS in a Construction related field preferred. Multi-Family Construction required. Podium, Wrap, Construction preferred. Strong working knowledge of Excel and Word Strong prioritization and organizational skills; detail-oriented Excellent verbal and written communication skills

We are seeking a highly skilled Mechanical Project Manager to oversee and manage mechanical engineering projects from inception to completion. The ideal candidate will be responsible for ensuring projects are delivered on time, within scope, and within budget. This role requires a strong understanding of mechanical systems and engineering principles, along with exceptional project management skills. Key Responsibilities Lead and manage mechanical engineering projects, ensuring alignment with client specifications and engineering standards. Develop project plans, timelines, and budgets, and monitor progress to ensure timely completion. Coordinate with cross-functional teams, including design, manufacturing, and quality assurance, to ensure project success. Identify project risks and implement mitigation strategies to minimize impact on project timelines and deliverables. Prepare and present project updates to stakeholders, including clients and senior management. Ensure compliance with safety regulations and industry standards throughout all project phases. Qualifications Bachelor's degree in Mechanical Engineering or a related field. Proven experience as a Project Manager in the mechanical engineering industry. Strong understanding of mechanical systems and engineering principles. Excellent organizational and multitasking skills, with the ability to manage multiple projects simultaneously. Effective communication and leadership skills, with experience in team management. Proficiency in project management software and tools. Benefits Range: $80,000-$130,000. Final determination of a successful candidate's pay is based on job-related knowledge, skills, education, and experience. 401K plan with matching contributions Health, Vision, and Dental Insurance Paid Time Off Health Savings Account, Health Reimbursement Account and Flexible Spending Accounts Health Wellness Programs Email Your Resume In Word To Looking forward to receiving your resume through our website and going over the position with you. Clicking apply is the best way to apply, but you may also: carson.kirk@cybercoders.com Please do NOT change the email subject line in any way. You must keep the JobID: linkedin : CK13-1850758 -- in the email subject line for your application to be considered.*** Carson Kirk - Recruiter For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 04/28/2025 and applications will be accepted on an ongoing basis until the position is filled or closed. CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at Benefits@CyberCoders.com to make arrangements.

They are responsible for prioritizing team activities, developing team members, and identifying and communicating team resource needs. Additionally, they are responsible for development of customer engineering relationships, project management, field engineering support and promotion of Corporate client technical/product solutions. Essential Duties and Responsibilities: • Prioritize team member activities and drive projects to be completed within project timelines. • Responsible for development and performance of team of technical personnel. This includes setting objectives, development plans, and delivering performance reviews. • Support and manage projects (product development or other) with responsibility for setting priorities, meeting customer deadlines and coordinating required activities via the APQP process • Accountable for building and maintaining strong relationships with our customers and their engineering teams • Create and maintain project schedule and milestone tracking to drive projects to successful completion ensuring accountability amongst all key stakeholders • Create project justifications and ensure target financial goals are achieved • Facilitate decision making and/or selection of products, components, or specific product development projects • Drive for continuous improvement of Corporate client product development processes and Corporate client products • Provide guidance for technical/product strategies and manage the execution of those strategies based on voice of customer feedback (VOC) and Corporate client technical/product strategic initiatives • Lead investigations and manage response to field performance issues and contribute to corrective action plans for key engineering issues • Other duties may be assigned Education and Experience: Required experience: • Bachelors of Science in Mechanical, Industrial, or Manufacturing Engineering from an accredited college or university • Minimum ten years' experience in relevant field • Experience in a leadership role in engineering, product development and/or product commercialization and experience in a customer facing role Preferred experience: • Knowledge of mechanical design principles, finite element analysis, engineering documentation, statistical analysis, and quality systems • Experience developing and maintaining quality documentation including process flow diagrams, PFMEA's, DFMEA's, control plans, APQP checklists, and work instructions • Creo/CATIA/NX • Teamcenter • Castings manufacturing and finishing process knowledge, understanding of plating techniques, familiarity with inspection and measurement methods • Commercial vehicle experience, especially vehicle chassis, suspensions, and brakes a plus. Qualifications and Competencies: • Engineering: Possesses the knowledge and skills required to create and execute engineering diagrams, plans, and models that fulfill the product and customer requirements. This includes specific skills and knowledge for either metal or plastics depending on the function/department. Is able to produce practical and functional solutions that meet operational needs. • Customer Focus: Builds customer confidence, is committed to increasing customer satisfaction, sets achievable customer expectations, assumes responsibility for solving customer problems, ensures commitments to customers are met, solicit opinions and ideas from customers. • Strategic Thinking: Creates and communicates a long-term vision, balances short and long term goals, keeps own and team's work aligned with overall goals, understands the market and can predict change, understands the industry and the competition, creates and adjusts strategic plans. • Managing for Results: Sets challenging and productive goals for team, keeps team accountable for actions, provides leadership and motivation, provides resources and support, uses checkpoints and data to track progress, sets up systems and processes to measure results. • Execution: Getting the job done, problem solving, driving for results, exercising control; setting high goals, using measurements, accountability; tenaciously working to meet or exceed goals; continuously improving themselves and the business. • Teamwork: Meets all team deadlines and responsibilities, listens to others and values opinions, helps team leader to meet goals, welcomes new members and promotes a team atmosphere; emphasizes cooperation and collaboration; treats coworkers like internal customers.

Commercial Banking Project Manager Contract Type: 6-Month Contract (Possible Extension) Work Schedule: Monday-Friday | 8am-5pm Pay: $60/hr Start Date: Flexible- ASAP Overview: This role supports our client's Commercial Strategy team, driving cross-functional strategic initiatives tied to market expansion, credit improvement, integration support, and process optimization. The team is expanding and looking for a Program Manager who can manage large, high-visibility projects while also supporting the day-to-day execution and coordination of ongoing initiatives. The ideal candidate brings strong change management expertise, executive communication experience, and the ability to navigate ambiguity while partnering closely with senior leadership to ensure seamless integration and delivery across multiple business lines. Responsibilities: Lead and mobilize strategic initiatives across the Commercial Bank Facilitate project planning, execution, and stakeholder alignment Oversee process improvement and reporting framework initiatives Manage timelines, deliverables, and communications across 20-30 projects Partner closely with leadership to drive consistency and accountability Support strategic and market deployment efforts across key functions Required Skills & Experience: 5+ years of Project or Program Management experience (large-scale initiatives) Proven success leading cross-functional teams in a complex environment Strong Change Management expertise (must-have) Proficient in PowerPoint and Excel; Visio exposure is a nice to have Excellent communication and executive presentation skills Background in Banking or Financial Services highly preferred PMP certification a plus, not required

Stevens Engineers & Constructors has an excellent opportunity for an experienced and highly motivated Industrial Construction Project Manager to join our Cleveland Operations Team. The ideal candidate will have project management experience in industrial construction markets. The Project Manager position is responsible for providing oversight for all phases of industrial construction projects, including coordinating employees, subcontractors, materials, equipment, while ensuring that specifications are being followed, and work is performed within quality standards as well as on schedule and within budget. The ideal candidate will also have a client-focused approach and will work well independently and as part of the project team. Stevens offers a competitive salary commensurate with experience, along with an excellent benefit package. This is a perfect career opportunity to join an experienced group of professionals that are committed to providing our customers with quality results. Essential Duties and Responsibilities Provide leadership and to establish and maintain effective and harmonious working relationships with all those involved in the project. Organize and execute the project safety compliance program within the guidelines of company policies. Initiate project safety meetings for on-site supervisors and labor force. Interface with the client as his primary contact, by receiving and communicating initial project setup information and periodic project status, writing significant project related correspondence, and representing the Company in meetings. Develop and maintain a thorough understanding of the provisions and requirements of all contract documents, including plans, specifications, owner's contract, subcontracts, and purchase orders. Develop and/or analyze the preliminary project documentation, such as project code of accounts, subcontracts and purchase orders. Organize and plan the execution of the physical work. Develop the project schedule and direct its long-term planning and execution. Communicate/coordinate schedule and plan with subcontractors and vendors. Recognize on-site activities which may impede project progress or jeopardize compliance to project/contract requirements.Prepare and submit related informational documents to the client or other responsible parties and implement corrective measures. Maintain strict control of the project budget for each work activity. Report monthly on the progress and current profitability of the project. Write subcontracts and purchase orders for field generated purchases and contracts. Review and approve related subcontractor and vendor invoices and change requests. Prepare, quote and negotiate contract changes with the General Manager's guidance. Maintain open communication with all other support and business units involved with the project. Maintain open line of communication with the local union officials. Promote goodwill with clients, architects, engineers etc., to facilitate construction activities and future repeat business. Supervise the project activities of the on-site project engineer, field superintendents, office manager and clerk. Participate in bidding, pre-construction services, budgeting and Continuous Improvement Programs. Required Skills and Certifications A bachelor's degree with major coursework in Construction Management Construction Science, Building Science, Engineering, or a related field is preferred. Requires current registration as a Professional Engineer (P.E.) in the State of Ohio. Five (5) years of project management experience in the construction industry. Able to multitask, prioritize, and manage time efficiently. Able to manage a team of employees and multiple projects. Experienced at compiling and following strict budgets. Excellent verbal and written communication skills. Accurate and precise attention to detail. Goal-oriented and organized leadership. Able to analyze problems and strategize for better solutions. In-depth understanding of the construction industry. Organized and able to create multiple timelines, budgets, and schedules. Knowledge of local, state, and federal building code regulations. Able to build solid relationships with team members, vendors, and customers. Computer Skills: Proficient with Microsoft Office; Microsoft Project and experience with construction / project management software. Equal Opportunity Employer Stevens Engineers & Constructors, Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category. We are proud to have a Drug Free Workplace that places Safety First!

The ideal candidate will be responsible for planning, coordinating, and implementing projects within the decided-upon budget, timeline, and scope. They will also effectively monitor and present project updates to relevant stakeholders, clients, or project team members. • Salary: $65,000-$85,000 • Bonus 15-20% of annual salary • 100% Onsite • 100% Company Paid medical, dental, vision, life ins, short/long term disability. • Unlimited PTO. Responsibilities Set project timeline Monitor project deliverables Update relevant stakeholders or team members on the project progress Coach and support project team members with tasks you assign them Qualifications Scrum/Agile processes and methodologies 3+ years of PM experience

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Pay Range: Min: 63,800 - Mid - 88,800 Bonus Plan:Profit Sharing Profit Sharing % Req ID: 27257 What You Will Do As an Electrical Engineer, you will collaborate in a team environment to design and support industrial electrical systems, which includes various types of equipment new and old. Specific responsibilities include: Engineer solutions to improve equipment reliability, safety, ergonomics, and compliance with ISO 14001, ISO 450001, and other EHS initiatives. Provide technical support to Production, Maintenance, and IT departments, reducing downtime and improving system performance. Develop, design, and update PLC, VFD, and HMI programs using various control automation platforms, including Rockwell, Siemens, and Beijer. Update and maintain National Instruments LabVIEW code for testing applications and equipment. Interface with engineering, manufacturing, maintenance, IT, MES, and Production teams to support facility projects. Apply NEC knowledge for planning industrial equipment installations and work with electricians to update documentation. Supply project leaders with capital cost estimates and timelines, and review capital equipment quotations. Lead projects or project steps, solve complex problems, and act as a resource for colleagues with less experience. Manage outside engineering and construction personnel, ensuring all safety, health, environmental, and compliance aspects meet regulations. Integrate equipment into data collection systems and establish network topologies. Support network backup, device patching management, and control system asset inventory. Compile data from connected devices for organizational use and develop standards for control systems hardware and software. Identify and assume additional responsibilities for projects and processes that align with and drive towards Lincoln Electric Company's 2025 Higher Standard Goals. Education and Experience Requirements This position is posted as a range, candidates with varying levels of experience and qualifications are encouraged to apply. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experience. Minimum requirements, Engineer II - Bachelor's degree in electrical engineering with 3+ years of professional relevant engineering experience. Experienced Professional - Has working knowledge and experience in own discipline Continues to build knowledge of the organization, processes and customers Performs a range of mainly straightforward assignments Uses prescribed guidelines or policies to analyze and resolve problems Receives a moderate level of guidance and direction Engineer III - bachelor's degree in electrical engineering with 5+ years of professional relevant engineering experience Senior "Go To" / Career Level Person - Has in-depth knowledge in own discipline and basic knowledge of related disciplines Solves complex problems; takes a new perspective on existing solutions Works independently; receives minimal guidance May lead projects or project steps within a broader project or have accountability for ongoing activities or objectives Acts as a resource for colleagues with less experience May represent the level at which career may stabilize for many years Engineer IV - bachelor's degree in electrical engineering with 8+ years of professional relevant engineering experience. Lead/Specialist - Is recognized as an expert in own area within the organization Has specialized depth and/or breadth of expertise in own discipline or function Interprets internal or external issues and recommends solutions/best practices Solves complex problems; takes a broad perspective to identify solutions May lead functional teams or projects Works independently, with guidance in only the most complex situations Experience Experience with AutoCAD Electrical CAD software. Experience with PLCs, HMIs, VFDs, and test equipment, including Rockwell Automation software, Siemens software, and National Instruments LabVIEW. Knowledge of NFPA 70, 70E, and 79, and other technical codes. Knowledge of basic networking concepts and SQL Database. Skills Demonstrate initiative and accept responsibilities with minimal supervision. Strong ownership and results-driven mindset. Good judgment, self-motivation, and safety consciousness. Excellent organizational skills. Superior written and oral communication abilities. Adaptability to handle diverse assignments and changing priorities. Hands-on work capability and effective collaboration on the shop floor. Critical thinking and exceptional problem-solving skills. Proficiency in supporting and troubleshooting industrial equipment. Flexibility to work off shifts, travel between facilities in Northeast Ohio, and as required. Effective teamwork with employees at all organizational levels. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Come work for OHM Advisors, the Community Advancement firm. With the singular mission of Advancing Communities , our diverse 750+ team of professionals works collaboratively across multiple service areas in multiple states, including architecture, engineering, planning, surveying, and construction engineering. We are a team of experts with individual specialties working together, driven to make a difference through people-focused problem-solving, design, and ideas. In everything we do, we put people first. We create places for communities of people that help solve a problem and drive them forward- advancing the whole community today and well into the future. What You Will Contribute to OHM Advisors The successful Project Engineer will have the opportunity to lead a multi-disciplinary team of engineers and technicians on municipal projects. Project engineering responsibilities include infrastructure design, preparation of construction documents, cost estimating, and thorough project QA/QC. Project Management duties include developing and managing the project scope, schedule, and budget; and delivering an overall quality project to our clients. Collaboration with a team of engineers and mentoring of entry-level staff will be essential. Your Responsibilities Managing multi-disciplinary engineering projects and engineers. Developing and maintaining project scope, schedule, and budget. Project Management with municipal projects involving infrastructure design, site/civil design, roadway rehabilitation/reconstruction, and pedestrian/bicycle facilities. Understanding of State, Local, and Federal funding programs. Understanding ODOT design criteria, standards, and specifications. Participation in local professional society functions. Client relationship management. Business development. Requirements Education, Experience & Licensure: Ohio Prof. Engineering License. 8-10 years' experience with Municipal Project Engineering. Experience with AutoCAD/Civil 3D, and/or MicroStation ORD. Technical Skills: The desire and ability to build strong client relationships. Ability to train entry-level engineers and interns. Excellent communication and organizational skills and enjoy working in a team environment. Benefits Summary At OHM Advisors, our people are our greatest asset. We're committed to providing a supportive and rewarding workplace that fosters personal and professional growth. That's why we offer a competitive benefits package designed to meet your unique needs. Benefits: BCBSM Medical, Dental and Vision Company Profit Sharing Flexible Spending & Health Savings Accounts 401(k) retirement savings plan with employer matching contribution Paid professional association membership Tuition & Certification Expense reimbursement Volunteer Service Leave 100% Employer-Paid Life Insurance Short & Long-Term Disability Options Career Advancement & Enrichment Programs: Voluntary Wellness Program OHM Grad School OHM University You can read more about each of these programs on our website. OHM Advisors is an Equal Opportunity Employer (EOE). All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. #LI-CC1

TITLE: Senior Energy Engineer LOCATION: Middleburg Heights, OH (open to candidates within a 2-3 hour radius of Cleveland, OH, including Toledo, Dayton, Detroit, Pittsburgh, and surrounding areas) TRAVEL: Up to 30% for worksite visits; remote candidates must work on-site at BG Headquarters in Middleburg Heights, OH, at least once per week. ELIGIBILITY: U.S. Citizens only (Federal Contractor) ABOUT BREWER-GARRETT The Brewer-Garrett Company is a facility solutions company dedicated to making buildings more energy-efficient through HVAC design, electrical upgrades, building automation systems, maintenance, and repair. We are a solutions-driven business with a proven track record of helping clients reduce energy costs while improving their carbon footprint. Our team's creativity, expertise, and dedication to providing practical solutions for our clients set us apart in the industry. We take pride in our collaborative, team-oriented approach to projects, and we are seeking an energetic Project Manager to join our talented team. ABOUT BREWER-GARRETT We are seeking a Senior Energy Engineer to lead energy conservation and efficiency projects that make a measurable impact. This role combines technical depth with project leadership - ideal for someone passionate about designing smarter, more sustainable systems across HVAC, building automation, lighting, and renewable technologies. As part of a collaborative, solutions-driven team, you'll partner with experts across disciplines to deliver innovative energy projects for commercial, institutional, and government clients nationwide. KEY RESPONSIBILITIES · Lead the development, design, and implementation of energy conservation projects for large and complex facilities. · Conduct energy audits, analyze utility data, and develop defensible energy and cost savings calculations. · Collaborate with internal teams (sales, engineering, estimating, and project management) throughout design and delivery. · Present technical findings and project recommendations to clients and internal stakeholders. · Stay current with emerging energy technologies, regulations, and best practices. · Mentor and provide technical guidance to Energy Engineers and project team members. · Support project execution from concept through completion, ensuring quality and accuracy in all deliverables. QUALIFICATIONS Bachelor's degree in Engineering or related field. 5+ years of experience in energy engineering, with expertise in HVAC systems, building automation, renewable energy, or central plant design. Experience across multiple sectors (healthcare, education, government, or industrial) strongly preferred. Certified Energy Manager (CEM) and/or Professional Engineer (PE) license preferred. Prior leadership, supervisory, or mentorship experience a plus. Valid driver's license and reliable transportation; ability to travel up to 50%. Must be a U.S. citizen and able to pass an FBI background check due to federal contract requirements. WHY JOIN US Be part of a mission-driven organization focused on sustainability and measurable energy impact. Work on diverse, high-profile projects that reduce carbon footprints and improve building performance. Join a collaborative team of experienced engineers who value creativity and innovation. Competitive compensation and benefits, including health, dental, vision, and 401(k). BG is proud to be an EOE and Drug-Free Workplace. Brewer-Garrett is an equal opportunity employer, all qualified job applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

The Weitz Company is hiring a Traveling Project Engineer with an emphasis in Quality to join our Aviation team! The Project Engineer is responsible for several functions throughout the duration of the assigned project including planning, buyout, management, and closeout. This role will assist the project team to monitor project status and identify issues that may impact the project schedule and/or budget. If you are looking for an opportunity to join a general construction company who is focused on employee growth and development, this could be a great fit for you! An ideal candidate for this position must be willing to travel once the assigned project is complete, based on the needs of the company. The Weitz Company has been Building a Better Way since 1855. We are a full-service construction company, general contractor, design-builder, and construction manager with office locations throughout the United States. We believe our employees to be our most valuable asset, and we are committed to growing a diverse and inclusive culture that inspires, motivates, and continuously improves. What You'll Do: * Organize, review, update, maintain, and post construction documents/drawings * Collaborate with project team to complete requests for information (RFI) * Review submittals and other project documents for accuracy against plans and specifications * Assist in preparing inspections, compliance audits, and the non-conformance log * Monitor material and equipment delivery status * Maintain and distribute accurate project logs * Understand scope of work to be included in subcontracts and/or purchase order agreements * Track subcontractor requests for change; solicit pricing and draft change orders within delegated authority * Understand and assist with project schedule management * Obtain closeout information, gather punch list items, prepare as-built drawings, and assist with warranty process * Travel and/or relocate to specified work assignments based on the needs of the company What We're Looking For: * Experience: * Industry related degree required * Previous construction internship or experience in project engineering role is highly preferred * Aviation construction is preferred * Skills: * High level of initiative and problem-solving skills * Excellent verbal and written communication * Detail-oriented and highly organized * Flexibility to balance competing needs * Ability to build positive relationships across the organization * Technology: * Proficient in basic computer software including Microsoft Word, PowerPoint, Excel, and Outlook * Ability to learn specific job-related software upon hire What We Offer: * Competitive Pay * Rewarding Bonus Program * Comprehensive Benefits Package with Tax-Advantaged HSA and FSA offerings * Employer-Paid Short- and Long-Term Disability Programs * Employer-Paid Life Insurance * Generous Paid Time Off Provisions * 401K Retirement Savings Plan with Company Match * Tuition Reimbursement * Fully Paid Parental Leave * Voluntary Products Including: Critical Illness Insurance and Accident Insurance * Corporate Wellness Program with Wellness Time Off and Rewards Visa sponsorship is not available for this position at this time. The Company does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of the Company without a prior written search agreement will be considered unsolicited and the property of the Company. Please, no phone calls or emails. The Weitz Company, LLC (and its U.S.-based subsidiaries and affiliates) recognizes the value of and is committed to hiring and retaining a diverse and inclusive workforce. We are an Equal Opportunity Employer and follow applicable affirmative action guidelines and policies. All qualified applicants will receive consideration for employment (including minorities, females, veterans, and individuals with disabilities, regardless of sexual orientation, gender identity, or other protected categories in accordance with applicable state and federal laws). The Company is a drug and alcohol-free workplace and background checks are required if applicable. Click here to review our Privacy Notice. #LI-MJ1

Role description: This internship is a great opportunity for students who participate in Project Lead The Way (PLTW) programs and are interested in manufacturing and engineering. You'll gain hands-on experience working in our plant, learning about production and how we improve the way we work. You'll be part of the Continuous Improvement (CI) team, helping with projects that make our processes faster, safer, and more efficient. You'll gain real-world skills like how to solve problems, work with teams, and use tools and systems that professionals use in manufacturing. The program will consist of project assignments that will lay a strong foundation for future careers in manufacturing, helping members become an expert in the metal manufacturing operations. By the end of the summer, you'll have a better understanding of how metal packaging is made and how to make production better through teamwork, safety, and analytical thinking. Job Responsibilities: * Help the CI Lead with improvement projects across the plant. * Prioitizing training early on tools and techniques used in manufacturing. * Support events focused on improving processes, like Kaizen, SMED (quick changeovers), and 6S (Sort, Set in order, Shine, Standardize, Sustain, Safety) activities. * Contribute to planning the AMPS Month celebrations and training sessions in August. * Collaborate with cross-functional teams to identify and implement process improvements. * Learn how to read and understand production data. * Become assimilated into the Ardagh Metal Packaging organization by participating in a comprehensive orientation program * Be assigned to a mentor within Ardagh Metal Packaging * Be exposed to and work on special projects (50%~ of the workload) to help the plants meet goals and leverage learning from work experiences * Present an end-of-internship summary to the Ardagh Metal Packaging executive leadership team Minimum Qualifications: * High school diploma * Ability to complete a 10-week internship from June-August 2026 * Cumulative GPA of a 2.6 * Completion of PLTW coursework, preferably * Ambition to pursue a career in the manufacturing industry, preferably Work Environment: * Required to wear Personal Protective Equipment (PPE) such as hearing and eye protection, steel toe boots, and other PPE * Must be willing to travel to the corporate office (Chicago, IL) for final week * Compliance with FDA regulations established by OSHA and the company Ardagh Metal Packaging is a leading global supplier of sustainable, infinitely recyclable metal beverage cans to brand owners. A subsidiary of sustainable packaging business Ardagh Group and a leading industry metal packaging company, Ardagh Metal Packaging employs more than 6,300 people across Europe, North America and Brazil, with sales of approximately $4.7 billion. Ardagh Metal Packaging believes that the success of our business depends on the success of our people. We strive to create working environments where our employees feel valued and can work to their full potential. We offer exciting and rewarding opportunities for talented and creative people. If you have ambition and want to make an impact with your career, come and join our team - you'll enjoy the journey! Ardagh Metal Packaging - North America has been and will continue to be an equal opportunity employer. All employment decisions are made without regard to sex, gender (including pregnancy, childbirth, breast feeding, and related conditions), sexual orientation, gender identity, gender expression, race, creed, religion (including religious dress and grooming), color, national origin, ancestry (including association, affiliation, or participation with persons or activities related to national origin, English-proficiency or accent, or immigration status), physical or mental disability, medical condition, genetic information, marital or domestic partner status, age, veteran or military status or any other basis prohibited by federal, state, or local law. Discrimination against any employee or applicant based on any of these factors is prohibited. Nearest Major Market: Cleveland Nearest Secondary Market: Mansfield

Design parts, drawings, and large assemblies within SolidWorks Perform Engineering analyses and simulations Provide support to the production floor for design changes or process improvements Collaborate with testing department and develop test methods Prototype building Utilize ERP for all data management related to products Skills & Qualifications 2+ years of experience Bachelor of Science in Mechanical Engineering or related degree SolidWorks CAD experience Knowledge of machine building, welding or fabrication methods Experience working within metals Job Type & Location This is a Contract to Hire position based out of Cleveland, OH. Pay and Benefits The pay range for this position is $29.00 - $38.50/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Cleveland,OH. Application Deadline This position is anticipated to close on Jan 30, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

The Horsburgh & Scott Company is a leading manufacturer of industrial gears and custom gear drives, boasting nearly 135 years of engineering and manufacturing expertise. Our commitment to quality and innovation ensures that we deliver the highest quality gearing products and services to our customers. To learn more about our Company and capabilities, visit our website Horsburgh & Scott | Gear Manufacturer and Gearbox Repair. Job Summary The primary function of the Estimator is to provide accurate pricing information for the design and production of our industrial gears, gear drives or gear repair services. Upon receiving a project request, the Estimator will review and analyze all customer supplied data, including technical and design specifications necessary to complete the project. The Estimator will accurately determine the raw materials, engineering, manufacturing, logistic, and other costs necessary to complete the project to specifications and provide the customer with an accurate quote on price. Primary Responsibilities Review the project request with the customer and/or salesperson. Review all customer supplied drawings, specifications, data, etc. For repairs, evaluate gearbox to determine necessary repairs and scope of work. Determine preliminary designs and specifications. Develop cost estimates based on the data supplied by the customer to include all preliminary design work, materials, production costs, etc. Review customer purchase orders to ensure they reflect the quote in accurate, up to date and meets the customers' expectations. Submit quote to customer in conjunction with the H&S sales team. Assist with overall workload within Applications Engineering to meet customer needs and department schedules. Qualification and Experience B.S. Mechanical Engineering or B.S.M.E.T. or equivalent work experience. Knowledge/experience with metal machining and manufacturing processes. Experience in the mechanical drive/power transmission industry preferred. Strong written and verbal communication skills. Computer literate with MS Office applications; design experience with Solid Works a plus. Superior time management skills; capable of handling multiple priorities. Strong problem-solving skills. Able to perform the essential functions of the position with or without accommodation.

Independence Construction is looking to add a seasoned Project Manager to our growing team in Cleveland, Ohio! Who is IC? Independence Construction is one of the largest CM businesses headquartered in Northeast Ohio. As part of the DiGeronimo Companies, we offer our clients self-perform services through our affiliated companies, as well as bring an owner's approach to projects through the company's work as a developer. We bring our experience and reputation for honesty, integrity, and outstanding performance to the world of design and management in order to ensure the best results for our partners, subcontractors, and community. What do we believe in? PEOPLE: Provide a safe, family-oriented environment. Commitment to integrity. Protect our most valuable assets. PERFORMANCE: Always deliver the highest quality. Find solutions. Provide value to our partners. COMMUNITY: Positively impact the communities we serve. Give back. Leave the world a better place than we found it. As a Project Manager you're responsible for all aspects of multiple construction projects for the duration of projects assigned; lead the project teams with the project executive(s) and represent Independence Construction to the client; work with IC executives on business development to secure future work. Develop Site Specific Safety Plans with Project Team, with assistance from company Safety personnel. Ensure safety is discussed at project morning huddles Work with estimating department on project bids and pre-construction phase for assigned projects. Assist in preparing Bid Packaging strategies and bidding Scopes of Work Prepare and review project schedules from pre-construction phase through close-out Working with estimating department, Initiate and award subcontracts to vendors and subcontractors during pre-construction phase; issue change orders as necessary. Develop and revise project budgets, as necessary On a monthly basis, prepare, monitor, and present Job Cost reports (i.e., budgets, GC expenditures, budget revisions, change orders and gross profit projections) for all projects assigned to Management and Company Controller Act as liaison with Owner/Architect for projects assigned Develop and Monitor Key Performance Indicators (KPIs) utilized on projects Administer and monitor compliance with construction contracts with Owners, subcontractors, and vendors; provide timely written notices in accordance with project manual and contract requirements Construction documentation management, including but not limited to applying for building permits, surveys, testing and inspections, in conjunction with projects' superintendents Coordinate and expedite materials and services for the job sites, in conjunction with superintendents Manage labor relations and work with appropriate internal personnel to resolve labor issues Analyze actual costs to estimates and document variances Prepare and update cash flow projections and if required using a cost-loaded schedule Oversee, manage and/or complete change management processes Review and coordinate structural, architectural and MEP drawings throughout project Oversee the MEP Coordination process and 3D or BIM utilization to assure project coordination is accurately being implemented Manage the Job Close out Process including Contracts with Owner, subcontractors and vendors, and obtain all necessary warrantees and releases With company and project executives, perform business development functions to obtain future work Do you have what it takes? Bachelor's degree in construction management or engineering; 5-7 years' experience in progressively responsible roles in construction management or equivalent combination of education and experience Ability to deal with situations involving sensitive and confidential company issues Strong written and oral communication skills; ability to communicate with all levels, both internally and externally Knowledge of budgeting and expense control Well-developed analytical and problem-solving abilities Able to write reports, business correspondence Able to organize work, engage in a variety of tasks simultaneously and consistently meet deadlines Knowledge of all different construction delivery systems Strong attention to detail