Project engineer jobs near me

Who is IC? Independence Construction is one of the largest CM businesses headquartered in Northeast Ohio. As part of the DiGeronimo Companies, we offer our clients self-perform services through our affiliated companies, as well as bring an owner's approach to projects through the company's work as a developer. We bring our experience and reputation for honesty, integrity, and outstanding performance to the world of design and management in order to ensure the best results for our partners, subcontractors, and community. What do we believe in? PEOPLE: Provide a safe, family-oriented environment. Commitment to integrity. Protect our most valuable assets. PERFORMANCE: Always deliver the highest quality. Find solutions. Provide value to our partners. COMMUNITY: Positively impact the communities we serve. Give back. Leave the world a better place than we found it. As a Project Engineer, your key responsibilities are to assist the project manager and/or superintendent in one or more aspects of a construction project. Coordination with Subs, vendors, suppliers, and Independence Construction project team. Administer and monitor compliance with construction contracts with Owners, subcontractors and vendors. Coordinate and expedite materials and services for the job site, in conjunction with superintendent. Schedule and manage meetings throughout each phase of construction and preconstruction. Assist the PM with the management of Project Budget, Budget Revisions, Cost Projections, and Cash Flow Projections. Assist with the generation of reports. Review and coordinate structural, architectural and MEP drawings throughout the project. Assist PM in the oversight and management of change management processes. Collect and analyze the trade contractor proposal for scope changes. Review and negotiate the cost for the change in scope to ensure the pricing is accurate and fair for the change in work. Log the change management to the correct cost codes. Issue the subcontract change order upon approval of the change by Owner and PM. Responsible for the entire RFI process (initiate, review the response, maintain a log and distribute to team as appropriate. Responsible for the entire submittal process (initiate, review the submittal, maintain a log and distribute to team as appropriate upon approvals. Responsible to keep accurate and current at all times the drawing log, submittal log, and RFI log. Coordinate all project meetings with PM and Superintendent prior to the start of project. Attend Owner / Architect / CM (Contractor) meetings. Collect, review and process subcontractor payment applications as assigned by the PM. Assist in compiling owner payment applications. Assist the Superintendent and PM as requested in creating and updating the Master Schedule. Quality Control and Quality Assurance - Work with the team (PM, PX, Supt.) for the development of the project QA/QC program. Assist PM and Superintendent with Close-out process. Assist with the preliminary punch list process. Coordinate owner-requested warranty requirements during the warranty period. Do you have what it takes? Bachelor's degree in construction management or engineering or equivalent combination of education and experience. 2-5 years of previous related experience is required Strong written and oral communication skills. Knowledge of budgeting and expense control. Able to write reports, and business correspondence. Able to organize work, engage in a variety of tasks simultaneously and consistently meet deadlines. Able to perform duties independently. Computer skills: Microsoft Office applications. Strong attention to detail.

Project Engineer - Water & Wastewater | Columbus, OH We are seeking a motivated Project Engineer to support the planning and execution of water and wastewater construction projects in the Columbus market. This role offers hands-on exposure to WWTPs, pump stations, utilities, and civil infrastructure, working closely with Project Managers, Superintendents, and field teams. Key Responsibilities Support planning, scheduling, and budgeting for water and wastewater projects Review drawings, specifications, and contracts for scope and compliance Prepare RFIs, submittals, material takeoffs, and project documentation Coordinate with subcontractors, vendors, and field crews to maintain schedules Track quantities, production, and costs to support project controls Assist with field operations, safety, quality, and issue resolution Participate in meetings with owners, inspectors, and project stakeholders Support project closeout including as-builts, O&M manuals, and punch lists Qualifications Bachelor's degree in Civil Engineering, Construction Management, or related field 1-4 years of experience in water/wastewater or heavy civil construction Ability to read and interpret civil, utility, and process drawings Proficiency with Bluebeam, AutoCAD, MS Office, and scheduling tools Strong communication, organization, and teamwork skills Safety-focused mindset What's Offered Competitive salary with clear career progression Full benefits package (health, dental, vision, retirement) Exposure to high-impact municipal water and wastewater projects Supportive, team-oriented environment focused on development and long-term growth

A nationally recognized architectural and engineering consultancy is looking to add a technically sharp and forward-thinking Project Design Engineer - Structural to their team. With offices in key markets and a reputation for innovation and quality, this firm is known for tackling projects that span commercial, civic, and institutional sectors. You're being invited to join a dynamic team where your skills in structural design will be valued, and you'll have plenty of chances to learn and grow alongside talented colleagues in a supportive atmosphere. What You'll Do: Contribute to the design and documentation of building structures using steel, concrete, timber, and hybrid systems. You'll play a key role in ensuring structural elements meet regulatory standards and are thoroughly analyzed for both new construction and renovation initiatives. Work closely with project managers on design intent, deliverables, and timelines. Collaborate with architects, MEP engineers, and other stakeholders to align structural solutions with project goals. Participate in quality checks, internal reviews, and technical coordination across project milestones. Help assess design challenges and offer technical input to guide project direction efficiently. Qualifications: A background in civil or structural engineering with a bachelor's degree is required, and having a postgraduate degree would be a significant advantage. A strong background in structural engineering and building design is expected, with familiarity with a variety of materials and systems. EIT with active progress toward PE/SE licensure, or currently licensed as a PE/SE. Familiarity with relevant building codes and experience using structural modeling tools. Team-first mindset with a track record of positive collaboration and quality execution. Why Join This Firm? Work on impactful projects that are shaping skylines and communities nationwide. Mentorship from experienced professionals and a budgeted path for continuing education. Strong internal culture that promotes autonomy, creativity, and career progression. Benefits include: Comprehensive health, dental, and vision plans 401(k) with match Paid time off and company holidays Annual bonus potential Student loan repayment options Certification/licensure reimbursement Flexible schedules and work/life balance support If you're ready to grow your technical capabilities while making a lasting impact through structural design, this role offers a compelling path forward. About Blue Signal: Blue Signal is an award-winning, executive search firm specializing in various specialties. Our recruiters have a proven track record of placing top-tier talent across industry verticals, with deep expertise in numerous professional services. Learn more at bit.ly/46Gs4yS

Columbus, OH Permanent I am working with a growing automation manufacturing company in the Columbus, OH area focused on producing high-quality products in a safety-first, team-oriented environment. They a offer stable work, opportunities to learn new skills, and career growth for motivated employees. Position Summary The Manufacturing Associate supports daily production by operating equipment, assembling and inspecting products, and ensuring work is performed safely, accurately, and efficiently. This role follows standard work instructions, quality requirements, and lean manufacturing practices to meet production goals. Essential Duties & Responsibilities Operate production equipment and tools according to standard operating procedures (SOPs) Assemble products/components, package finished goods, and label per specifications Perform quality checks (visual inspection, measurements, defect identification) and document results Load/unload materials, stage work-in-process (WIP), and maintain line flow Follow safety rules, wear required PPE, and report hazards or near-misses immediately Maintain a clean, organized workstation (5S) Accurately complete production paperwork, scans, and/or basic data entry Support changeovers, basic troubleshooting, and minor preventative maintenance as trained Work collaboratively with team leads, maintenance, and quality to resolve issues Meet productivity, quality, and attendance standards Qualifications (Required) Engineering Degree (or equivalent years experience) Ability to follow written and verbal instructions in English Basic math and measurement skills (ruler/caliper use a plus) Comfortable standing for extended periods and performing repetitive tasks Able to lift up to 35-50 lbs (adjust as needed), bend, reach, and push/pull carts Willingness to work overtime or weekends as needed Preferred Qualifications (Nice to Have) 1+ year manufacturing, warehouse, assembly, CNC, molding, or packaging experience Forklift/pallet jack experience (or willingness to train/certify) Familiarity with lean/5S, ISO, GMP, or cleanroom environments (as applicable) Experience with work orders, scanners, or ERP systems Work Environment Manufacturing floor with noise, moving equipment, and temperature variation PPE required (safety glasses, hearing protection, gloves, steel-toe shoes, etc.) May involve exposure to oils, coolants, adhesives, or dust depending on department

Provide the definitive technical solutions to the development, maintenance, and enhancement of business applications, providing specialized technical or business knowledge to projects. Identify causes and implement solutions to business problems in a multifunctional project, assessing and communicating issues of technology impact on the business. Apply a broad knowledge of various technical functions to accurately anticipate organizational impacts and share responsibility with other team members to ensure on-time product delivery. Specific Duties, Activities and Responsibilities Knowledge of data warehousing architecture, including modeling needed to support it. Strong development and support expertise in DataStage Version 8.7/9.1/11.7, ETL, UNIX scripting and debugging, Oracle, Teradata, DB2 (generic DB skills). Strong ETL design and development skills. Deep expertise on ETL architecture and solutions providing experience. In-depth knowledge of Systems Development Life Cycle with a strong emphasis on Engagement, Analysis, Design, Development, and Deployment. Knowledge of network architectures and systems performance consideration. Strong verbal and written communication skills, with an ability to express complex technical concepts in business terms. Under the guidance of the manager, collaborate with company customers, staff members, IT colleagues, and other stakeholders to define detailed customer requirements and system interfaces, assess available technologies, and develop and present solutions. Perform assessments and listen to internal/external customers to understand and anticipate their needs and determine their priorities in the context of the overall enterprise. Skills Required Skills Strong development and support expertise in DataStage Version 8.7/9.1/11.7, ETL, UNIX scripting and debugging, Oracle, Teradata, DB2 (generic DB skills). Strong ETL design and development skills. In-depth knowledge of Systems Development Life Cycle with a strong emphasis on Engagement, Analysis, Design, Development, and Deployment. Strong verbal and written communication skills, with an ability to express complex technical concepts in business terms. Desired Skills Knowledge of data warehousing architecture, including modeling needed to support it. Deep expertise on ETL architecture and solutions providing experience. Knowledge of network architectures and systems performance consideration. Various ETL and data warehousing technologies (IBM DataStage, Quality Stage, Informatica).

We are seeking a highly skilled and experienced Senior Electrical Engineer with a focus on Power and Controls. The ideal candidate will have a strong background in electrical engineering, with at least 10 years of experience and a Professional Engineer (PE) license. This role involves designing, developing, and implementing power systems and control solutions that enhance operational efficiency and safety. Key Responsibilities: Design and develop electrical power systems, including high and low voltage equipment. Analyze and optimize power distribution systems and controls to meet performance specifications. Collaborate with cross-functional teams to integrate electrical systems into larger projects. Conduct feasibility studies, risk assessments, and technical evaluations for electrical designs. Lead projects from conception through execution, ensuring compliance with industry standards and regulations. Prepare and review technical documentation, including specifications, reports, and schematics. Provide mentorship and guidance to junior engineers and technical staff. Stay updated on industry trends, technologies, and best practices to drive innovation. Troubleshoot and resolve electrical issues in existing systems and propose solutions for enhancements. Qualifications: Bachelor's degree in Electrical Engineering or a related field (Master's degree preferred). Professional Engineer (PE) license is required. Minimum of 10 years of experience in electrical engineering, with a focus on power systems and controls. Proficient in electrical design software (e.g., AutoCAD, ETAP, or similar). Strong understanding of industry standards (IEEE, NEC, etc.) and safety regulations. Experience with project management methodologies and tools. Excellent problem-solving skills and attention to detail. Strong communication and interpersonal skills, with the ability to collaborate effectively with diverse teams.

Job Title: Data Integration Engineer (DataStage/ETL) 6-12 Month Contract with possible extension Job Type: W2 Contract Visa: USC/GC We are seeking a Data Integration Engineer to design, develop, and support enterprise ETL and data warehousing solutions. This role requires deep expertise in DataStage and strong collaboration across technical and business teams. Key Responsibilities: · Design, develop, and support ETL solutions using IBM DataStage. · Support data warehousing architectures and modeling. · Develop and debug UNIX scripts supporting ETL workflows. · Collaborate with stakeholders to define requirements and integration strategies. · Troubleshoot data pipeline and performance issues. · Support SDLC phases from analysis through deployment. Required Skills & Qualifications · Strong experience with IBM DataStage (8.7 / 9.1 / 11.7). · Expertise in ETL design and data warehousing concepts. · Experience with Oracle, Teradata, DB2, or similar databases. · UNIX scripting and debugging skills. · Strong written and verbal communication skills. Preferred Skills · Experience with Informatica or QualityStage. · Knowledge of network architectures and performance considerations. Healthcare or large-enterprise data environment experience

The Project Manager will be responsible for creating job schedules, coordinating the delivery of tools and fabrications, identifying and managing the personnel assigned to each project, and tracking labor efficiency. In addition, the individual will be responsible for representing the company at job progress meetings and initiating change orders. ESSENTIAL DUTIES AND RESPONSIBILITIES Include the following. Other duties may be assigned. Accurately define project requirements. Create job schedules. Coordinate the delivery of tools and fabrication. Identify and manage the personnel assigned to each project and track their labor efficiency. Represent the company at job progress meetings. Initiate change orders as needed. Complete contract progress billings as required. Estimate remaining “cost-to-complete” for monthly WIP reporting. Manage the day-to-day operations of assigned projects to ensure they are completed on time and on budget. Serve as the main point of contact for clients on assigned projects. Work with clients to brainstorm creative solutions to problems to ensure their needs are met through our customized solutions. Monitor assigned projects following established guidelines to ensure they are completed as efficiently as possible. Communicate with team members regarding project needs. Ability to work in a fast-paced dynamic environment. Read and analyze job cost reports. Respond in a timely manner to inquiries from management. Assist with collections as required. Communicate daily with foremen. Consistently overlook the design progress. SUPERVISORY RESPONSIBILITIES Will provide direct supervision to the individuals assigned to the projects being managed. QUALIFICATIONS To perform this job successfully, the individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High School Diploma or GED is required. 3+ years working in estimating and/or project management is required. Previous construction experience is a plus. Knowledge of NFPA and industry standards is a plus. A degree from an accredited college or university is a plus. Significant experience with Microsoft Office (i.e., Word, Excel, PowerPoint) applications is required. Knowledge of scheduling programs is a plus. Ability to think strategically, make sound decisions, and produce accurate and timely results is required. Building positive working relationships with multiple levels of employees and management is required. Demonstrating integrity and professionalism is required. Demonstrating commitment to company values is required. Excellent organizational skills are required. Ability to follow-up on tasks and assignments in a timely manner is required. Excellent written and verbal communications skills are required. Ability to prioritize in a fast-paced multi-task environment is required. Ability to perform basic business mathematical functions is required. Ability to work with minimal supervision is required. Ability to work effectively in a team environment is required. Complying with all operating policies, procedures, executed plans, and programs is required. Ability to delegate when needed is required. LANGUAGE SKILLS Must have the demonstrated ability to effectively communicate, cooperate, and collaborate with multiple levels of employees, government agencies, customers, vendors and suppliers. PHYSICAL REQUIREMENTS The physical requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand see, talk, and hear. The employee is regularly required to use hands to finger, handle, or feel objects, tools, or controls. The employee is regularly required to walk, reach with hands and arms, climb, balance, stoop, kneel, crouch, pull/push, or crawl. Specific vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. The strength rating for this position is classified as medium work which entails exerting 20-50 pounds of force occasionally, and/or 10-25 pounds of force frequently, and/or greater than negligible up to 10 pounds of force constantly to move objects. This position frequently requires protective equipment for eyes, feet, and head. Occasionally requiring protective equipment for arms, hearing, full body, leg, respirator, and skin. Operations of a computer, telephone, a hand calculator, and copiers/fax machine are required. Understanding advanced math (Calculus, Algebra, & Geometry), shop math, simple drawings, technical reports, technical instructions, financial reports, layout work, legal documents, simple memos, and business letters is required. Writing or presenting simple memos, summaries, business letters, and technical reports is required. While performing the duties of this job, the employee is regularly required to commute to customer and company locations by land and air.

Title: Project Manager - Pharmaceutical / Life Sciences Compensation: $110K-$140K base + bonus + vehicle allowance + gas card I'm partnered with a reputable mechanical contractor in Columbus. Their Integrated Projects Group division is expanding and looking to bring on an experienced Project Manager to oversee a portfolio of pharmaceutical and life sciences projects. The team operates with a modern, flexible structure - no red tape, no corporate layers - and values professionals who take ownership and thrive in a collaborative, results-driven environment. Key Responsibilities Manage multiple concurrent pharmaceutical and owner-direct projects across central Ohio Coordinate self-perform mechanical work and manage key subs (controls, electrical, insulation, balancing) Interface directly with client facilities teams to deliver turnkey, design-build solutions Oversee budgets, schedules, and quality standards from precon through closeout Collaborate with estimating, operations, and business development to support repeat-client work Utilize digital PM tools (e-Builder, Teams, Zoom) for documentation and coordination Qualifications 7-12+ years of project management experience in commercial or industrial construction Background in mechanical contracting or GC-side MEP-heavy projects preferred Pharmaceutical or life sciences experience strongly preferred Demonstrated ability to manage multiple active projects independently Stable career history with proven client-facing ability Strong understanding of design-build and owner-direct project delivery Tech-savvy and comfortable in a flexible, collaborative environment If you're interested in exploring this confidential opportunity, please apply or send your resume directly to avanaelst@irisrecruiting.com.

Job Title: Industrial/ Manufacturing Engineer Employment Type: Full-Time We are seeking a highly skilled Industrial/Manufacturing Engineer to support our production operations in Raymond, Ohio. This role focuses on optimizing manufacturing processes, developing tooling and fixture solutions, and supporting welding-related engineering activities across the plant. The ideal candidate will bring strong hands-on engineering expertise, a continuous-improvement mindset, and the ability to work collaboratively with cross-functional teams to enhance quality, safety, and efficiency on the shop floor. Key Responsibilities Process & Manufacturing Engineering Analyze, develop, and improve manufacturing processes to increase productivity, reduce waste, and enhance overall operational efficiency. Perform time studies, workflow analysis, and capacity planning to support production scaling and line balancing. Develop and maintain standardized work instructions, process documentation, and manufacturing guidelines. Tooling & Fixture Development Design, specify, and validate tooling, jigs, and fixtures required for assembly, fabrication, and welding operations. Collaborate with tool shops and suppliers for fabrication, trials, modifications, and implementation of fixtures. Conduct fixture capability studies and ensure tools meet quality, safety, and ergonomic requirements. Welding Engineering Support Provide technical expertise for welding processes (MIG/TIG/spot welding), weld sequence optimization, and weld quality improvement. Support welding equipment setup, parameter development, and troubleshooting. Work with quality teams on weld inspections, defect reduction initiatives, and compliance with welding standards. Continuous Improvement (CI) & Lean Initiatives Implement Lean Manufacturing and Six Sigma methodologies to drive continuous improvement. Lead Kaizen events, root-cause analysis, PFMEA reviews, and corrective action implementation. Identify automation opportunities and support integration of robotics, welding automation, or material-handling improvements. Cross-functional Collaboration Work closely with Production, Quality, Maintenance, and Safety teams to resolve issues and support daily operations. Provide engineering guidance during new product launches, process changes, and equipment commissioning. Support APQP activities, PPAP documentation, and process validation. Qualifications & Experience Required Bachelor's degree in Industrial Engineering, Manufacturing Engineering, Mechanical Engineering, or related field. 3-7 years of experience in a manufacturing environment, preferably automotive or heavy industrial. Hands-on experience with tooling, jigs, fixtures, and welding processes. Strong understanding of Lean Manufacturing principles, process flow, and industrial engineering fundamentals. Proficiency in CAD software (SolidWorks, AutoCAD, or similar). Familiarity with PFMEA, control plans, work instructions, and related engineering documentation. Preferred Experience with robotic welding systems or automated welding lines. Knowledge of GD&T and precision fixture design. Working experience with PLC-controlled equipment or automation integration. Certification in welding engineering or Six Sigma (Green Belt or above).

Commerical Banking Project Manager Contract Type: 6-Month Contract (Possible Extension) Work Schedule: Monday-Friday | 8am-5pm Pay: $60/hr Start Date: Flexible- ASAP Overview: This role supports our client's Commercial Strategy team, driving cross-functional strategic initiatives tied to market expansion, credit improvement, integration support, and process optimization. The team is expanding and looking for a Program Manager who can manage large, high-visibility projects while also supporting the day-to-day execution and coordination of ongoing initiatives. The ideal candidate brings strong change management expertise, executive communication experience, and the ability to navigate ambiguity while partnering closely with senior leadership to ensure seamless integration and delivery across multiple business lines. Responsibilities: Lead and mobilize strategic initiatives across the Commercial Bank Facilitate project planning, execution, and stakeholder alignment Oversee process improvement and reporting framework initiatives Manage timelines, deliverables, and communications across 20-30 projects Partner closely with leadership to drive consistency and accountability Support strategic and market deployment efforts across key functions Required Skills & Experience 5+ years of Project or Program Management experience (large-scale initiatives) Proven success leading cross-functional teams in a complex environment Strong Change Management expertise (must-have) Proficient in PowerPoint and Excel; Visio exposure is a nice to have Excellent communication and executive presentation skills Background in Banking or Financial Services highly preferred PMP certification a plus, not required

Are you a Project Manager or Senior Project Manager with a minimum of 7 years experience delivering Ground-Up Commercial projects upwards of $15M? Or, are you a PM/SPM looking for more diverse projects as well as a clearer path for growth? If you answered "yes" to either, let's chat! Our client is a mid-sized, Ohio-based GC with over 50 years in business and build projects across the Commercial, Industrial, Healthcare, Higher Education, K-12, and Multifamily sectors. Due to significant growth, they are now looking to add at least (3) Project Managers to their field team! Company/Role Highlights: 50+ years in business with multiple offices in Ohio 10+ years' experience delivering Ground-Up projects > $20M Projects: Commercial, Industrial, Healthcare, Higher Education, K-12, Multifamily Location: Columbus, OH Salary: $120K - $160K DOE + Bonus & Benefits

BS Degree or higher in ME. Minimum of 7 years of automotive experience in using Catia for 3D design. Minimum of 5 years of experience in designing BIW components A related advanced degree may be substituted for 2 years of experience. Strong knowledge of vehicle styling and packaging. Strong understanding of DFM (Design for Manufacturing) required. Experience with Catia v6 (3DX) is a significant advantage. Familiarity with vehicle simulation, especially in Body rigidity, NVH, and Crash, is highly preferred. Ability to program in VBA and EKL to automate design workflows is highly preferred. Detail-oriented with strong organizational and multitasking capabilities to handle simultaneous projects and support requests. Excellent communication skills to liaise between design and CAE teams. Use industry best practices and up-to-date technologies to identify inefficiencies and improve the design process. A self-starter who proactively accomplishes tasks with minimal guidance.

Project Engineer / Project Manager - Water/Wastewater Construction Seeking a Project Engineer or Project Manager to support ongoing water, wastewater, and heavy civil construction projects. This is a field-based role working directly with project leadership to ensure safe, efficient, and compliant project execution. Key Responsibilities Coordinate and manage daily project engineering activities in support of field operations. Interpret design documents, support construction planning, and participate in technical problem solving. Lead and administer construction documentation processes including RFIs, submittals, material tracking, and payment applications. Assist with scheduling activities and monitor progress against project plans. Support constructability reviews, quality control efforts, and design clarifications. Participate in meetings with internal teams, clients, subcontractors, and engineering representatives. Provide oversight for preconstruction and design-build coordination as needed. Complete additional tasks and assignments as required by project leadership. Qualifications Bachelor's degree in Civil Engineering, Construction Management, or related field; equivalent experience accepted. 5+ years of project engineering or construction management experience within water/wastewater Strong understanding of construction engineering practices, drawings, and specifications. Experience with construction documentation tools (RFIs, submittals, schedules, etc.). Effective communication and coordination skills across multiple disciplines. Professional Engineer (PE) license is beneficial but not required. Preferred Attributes Strong technical aptitude and analytical skills Collaborative mindset with a solutions-oriented approach Ability to manage competing priorities in a fast-moving field environment Detail-driven with strong follow-through

Project Manager - Architectural Employment Type: Full-Time / Direct Hire We are seeking an experienced Project Manager with an architectural background to join a dynamic team in Columbus, OH. This role offers the opportunity to manage custom architectural projects from initial engagement through final delivery, working closely with clients, architects, engineers, contractors, and fabrication specialists. Position Overview: As a Project Manager, you will serve as the central point of contact for all project stakeholders and be responsible for leading project execution with precision and professionalism. You will ensure projects are delivered on time, within budget, and in alignment with quality standards and client expectations. Key Responsibilities: Serve as the primary liaison for internal teams and external partners, including clients, architects, engineers, and contractors. Lead project planning, scheduling, execution, and close-out activities. Maintain and manage project timelines, monitor progress, and proactively address schedule concerns. Prepare and maintain project budgets, provide regular budget analysis, and communicate financial status to stakeholders. Accurately document project discussions, decisions, and action items to keep all stakeholders informed and aligned. Facilitate effective communication across all levels of the organization. Ensure compliance with contractual requirements, safety protocols, and company standards. Required Skills & Attributes: Excellent verbal and written communication skills, with the ability to lead meetings, present to clients, and capture critical project details. Strong organizational skills with proven ability to manage budgets, schedules, and teams in a fast-paced environment. Collaborative team player who can also work independently and take initiative. Exceptional time management and multitasking capabilities. Adaptable and able to navigate shifting priorities. Qualifications: BA/BS degree in Architecture, Construction Management, Engineering, or a related field (or equivalent experience) preferred. 3+ years of project management or related experience. Architectural background preferred but not required Ability to read and interpret construction drawings and plans. Previous estimating experience is a plus. Proficiency with CRM systems and Microsoft Office (Outlook, Word, Excel).

📍 Ohio, U.S. | Full-Time | Onsite We are seeking an experienced NX Designer to support the design and development of aerospace tooling and ground support equipment for civil and defense applications. This role is part of a growing engineering organization supporting complex, high-quality products used by leading aerospace OEMs. The ideal candidate is highly proficient in CAD Software, enjoys working closely with engineering and manufacturing teams, and is comfortable supporting designs from concept through production. What You'll Do: Create and modify 3D models and 2D drawings using Siemens NX or CATIA. Support the design of aerospace tooling, fixtures, and ground support equipment. Collaborate with engineers, manufacturing, and quality teams to ensure designs are manufacturable and compliant. Update and maintain design documentation, BOMs, and drawing packages. Support design changes, revisions, and continuous improvement initiatives. Participate in design reviews and support production troubleshooting as needed. What We're Looking For: Strong proficiency in Siemens NX or CATIA (required). Experience in aerospace manufacturing, tooling, fixtures, or heavy mechanical equipment preferred. Ability to produce clear, accurate drawings and models to engineering standards. Familiarity with GD&T and engineering documentation best practices. Strong attention to detail and ability to work in a collaborative, deadline-driven environment. Associate or Bachelor's degree in Mechanical Design, Engineering Technology, or related field preferred. Why Join: Work on high-impact aerospace products supporting civil and defense programs. Join a growing organization with expanding U.S. manufacturing operations. Collaborate with experienced engineers and manufacturing teams. Competitive compensation and comprehensive benefits. If you're an NX Designer who enjoys hands-on design work and seeing your designs built on the shop floor, we'd love to hear from you.

The Integrations Project Manager serves as the project lead for client API integration projects, managing cross-functional performance improvement initiatives across multiple directives. This role combines technical expertise with relationship management to drive measurable business results in API integrations, support sales initiatives, and ensure successful project delivery from conception through implementation. High school diploma or equivalent required Minimum 3-5 years of project management experience with proven leadership capabilities and self-directed work style Minimum 3 to 5 years of experience in the consumer reporting industry, including credit bureaus specialty consumer reporting agencies, data aggregators, or risk management services providers Strong understanding of technical concepts including APIs, OAuth, JSON, and integration processes Knowledge of process improvement methodologies such as Lean, Six Sigma, or Agile Expert-level proficiency in Microsoft Office Suite, particularly Excel, PowerPoint, and Visio and other project management tools such as Jira, Quickbase, and Salesforce Excellent presentation and communication skills for both technical and non-technical audiences, including senior leadership Advanced analytical and problem-solving skills with data-driven decision-making approach Experience with or willingness to learn AI tools and emerging technologies Bachelor's degree in Business Administration, Engineering, Computer Science, or related field PMP (Project Management Professional) or equivalent certification Knowledge of Fair Credit Reporting Act (FCRA) regulations and compliance requirements

Project Manager - Natural Products Industry (Supplements) The Project Manager is responsible for coordinating business projects from inception to completion which requires working collaboratively with cross-functional teams across the division as well as corporate shared services. The Project Manager communicates with the leadership team to align intended outcomes in accordance with our strategic business plan to ensure the overall effectiveness and success of each project. This position reports to the Division General Manager What you'll be doing: Project Planning: Defines project charter, scope, objectives and deliverables in collaboration with leadership and stakeholders. Project Management: Defines and assigns tasks to project team members; coordinates and aligns cross-functional project teams by leading regular project meetings; fosters collaboration with effective communication as the primary point-of-contact for projects. Progress Monitoring: Tracks and monitors project progress to ensure timely delivery of milestones and objectives; regularly updates key stakeholders; analyzes project status and, when necessary, recommends revisions to scope, schedule or budget to meet requirements. Documentation: Prepares and submits necessary project documentation, including requests, reports, and revisions; regularly updates Jira Work Management, as required. Resource Management: Coordinates internal and external resources to ensure projects adhere to scope, schedule, and budget. Assists Division General Manager in identifying, creating, maintaining, and improving Standard Operating Procedures for effective and efficient business operations. Collaborate with cross-functional teams to introduce or improve AI-assisted workflows, encouraging adoption and assisting team members in using tools effectively. Leverage AI tools and continuously evaluate emerging AI capabilities relevant to project planning and management. What we're looking for: Bachelor's degree in project management, business administration, communications, or relevant field, with a minimum five (5) years of experience working in project or product management. Experience at a CPG company or manufacturer is a plus . Proven track record of successfully managing multiple projects with varying levels of complexity and deliverables. Knowledge and experience with general business processes as well as new product development and launches, product distribution, and marketing. Collaborates effectively with all levels, across multiple departments, including on-site and remote employees. Initiates, supports, and implements process changes to improve operational effectiveness and efficiency; assists others to successfully manage process changes. Ensures accountability for his/her own work and reviews other's work and information for completeness and accuracy; prepares for meetings and presentations; follows up timely to ensure projects and related action items are being completed as scheduled. Exceptional abilities in organization and time management with proven track record of organizing tasks and managing multiple deadlines. Strong written and verbal skills to convey ideas, manage expectations, and ensure clarity with leadership and project team members. Proficient in Office365 especially Outlook, Teams, PowerPoint and SharePoint. Expertise in project management software; Jira Work Management experience is a plus. Location and Travel Requirements: The Project Manager will be based in the Columbus/New Albany, OH office. Up to 20% travel per year is expected, primarily to the corporate headquarters in Coshocton, OH, but also overnight travel for trade shows, training, and other events/meetings. This may go up or down based on the individual year. The Project Manager is an exempt, salaried position. General business hours are 8:00AM to 5:00PM EST, Monday through Friday. Work outside these hours may be necessary from time to time to meet deadlines, travel, entertain customers and vendors, and various other reasons. The Company complies with all applicable federal and state wage and hour laws. Why Join Us? You'll be part of a dynamic team in an innovative company that values hard work, collaboration, and personal growth. We offer a competitive salary based on experience and knowledge, along with an attractive benefits package that includes: Company-paid premiums for Health, Dental, Vision, Life, and Disability insurance 401(k) plan with company match Paid Parental, Vacation, Sick, Holiday, and Bereavement leave Who we are: Wiley's Finest , a Wiley Companies brand, focuses on science-driven supplements that make a significant impact on human and environmental health. We launched in 2012 as Wiley's Finest Wild Alaskan Fish Oil with the mission to bring consumers high-potency, sustainably sourced Omega-3s. We have since evolved our mission with the introduction of our Plant Powered Nutrition and Nutriment Plus product lines, which provide essential nutrients to people with diverse dietary needs at any stage of life. Our roots go back to the founding of Wiley Organics Inc. in 1981. Today, Wiley Companies is a family of experts and brands driven to nurture a lasting, positive effect on the world through the innovative power of chemistry. To learn more, visit us at ********************* If you're ready to take the next step in your career and drive success in an innovative company, we'd love to hear from you!

The Project Manager plays a crucial role in overseeing and managing the entire construction process from start to finish. This role requires strong leadership skills, extensive construction knowledge, and the ability to manage multiple crews simultaneously while ensuring safety, efficiency, and quality. The Project Manager will work closely with project superintendents, field supervisors, and subcontractors to maintain smooth project execution, enforce safety protocols, and ensure timely and cost-effective completion of projects. Key Responsibilities: Project Planning & Execution Attend a Pre-Construction meeting with the Sr. Project Manager before project commencement to review: Plans, rough openings, shear walls, floor and truss layouts, and details Labor purchase orders Material delivery schedules and equipment Attend a Pre-Construction meeting with the Sr. PM and the subcontractor foreman to assign scopes of work, release purchase orders, and obtain contract signatures Create bills for subcontractor draws, paid for work completed Verify wall layouts for subcontractors to ensure precision and accuracy Mark punch-out lists for subcontractors and ensure all discrepancies are corrected before final inspections Conduct weekly Toolbox Talks & Project Pulse meetings Conduct Quality Control Walks as project progresses, ensuring all subcontractors meet quality standards Site Oversight & Supervision Ensure proper equipment and tools are available and onsite for project completion Monitor construction progress and enforce adherence to schedules, identifying, and addressing potential delays proactively Maintain a clean and organized job site, enforcing cleanliness among subcontractors Implement and uphold Supreme Builders' safety policies, ensuring all workers wear the necessary protective gear Quality Control & Compliance Conduct routine inspections to ensure all work meets building codes, safety regulations, and project specifications Maintain a strong attention to detail, verifying critical elements Attend all job site trade meetings for the duration of the project Communication & Documentation Maintain clear and consistent communication with project stakeholders, including project superintendents, field supervisors, and subcontractors Keep detailed records of site activities, including: Daily Logs Delivery Schedules Photos and documentation of potential issues or disputes Report project updates, challenges, and necessary adjustments to management Resource & Time Management Verify material deliveries match order specifications Oversee material management, ensuring deliveries are received on schedule and stored securely Track additional work required by the General Contractor, ensuring proper timekeeping and documentation of changes Submitting change order scopes of work to Sr. PM for approval Assist in cost-saving measures by ensuring proper use of materials and fuel, tracking rental equipment return dates, and limiting the amount of rework Collaboration & Leadership Foster a team-oriented environment where all members, including subcontractors, collaborate effectively Ensure accountability by holding team members responsible for assigned tasks Strong leadership and team-building skills to foster a productive work environment Qualifications & Skills: 5+ years of experience in construction supervision or site management Extensive knowledge of construction principles, building codes, regulations and safety standards Mastered ability to read and interpret construction blueprints, drawings, and construction plans precisely Strong leadership and organizational skills to manage multiple projects efficiently Excellent communication skills to work with clients, project managers, subcontractors, and field teams Critical thinking and problem-solving abilities to address challenges proactively Financial acumen to assist in budget management, cost controls, and resource allocation Strong work ethic, dedication, and adaptability to handle the demands of construction projects Proven experience in multifamily construction required Preferred fluency in the English and Spanish languages (not required) Must be able to lift and carry objects weighing up to 50 lbs. on a regular basis