Project engineer jobs in York, PA - 727 jobs

Dutchland, LLC designs, manufactures and constructs precast, post-tensioned concrete tanks for water, wastewater and renewable energy applications. Our team is growing and we're seeking a structural engineer (all experience levels, Spring 2026 grads welcome to apply). This is a great opportunity to make a difference in the water and wastewater industry. Position Responsibilities: Perform structural analysis and design of precast, post-tensioned concrete tanks in compliance with appropriate design codes and Dutchland standard practices Oversee the preparation of Erection and Production drawings for precast, post-tensioned concrete tanks Coordinate with the Project Management, Production and Construction departments to produce and install tanks within established budgets and schedules Contribute to efforts within the Engineering Department to continuously improve quality and efficiency of structural designs Contribute to efforts in the Engineering and Drafting Department to continuously improve efficiency of workflow Travel to job sites to inspect the work, as needed Perform stripping and handling calculations for precast concrete panels Interpret Contract Documents for environmental engineering tank projects Diligently work to obtain proficiency in analysis and design of all types of tanks produced by Dutchland Qualifications: B.S. in Civil Engineering, or equivalent Engineer-in-Training certificate PE license is a plus, but not required Reinforced concrete design Prior precast concrete and/or concrete tank design experience is desirable, but not required Foundation design Experience with 3D CAD modeling software desired, but not a requirement Technical writing Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people in the classification and are not intended to be construed as an exhaustive list of all job responsibilities, duties, and skills required of personnel so classified.

Project Engineer/ Manager Travel: open to regional travel Pay: $90K/yr- $120K/yr (Based on experience) The primary role of the Project Engineer/ Manager will report directly to the Geotechnical Manager. The Regional Manager will support and assist the Geotechnical Manager in ensuring the assigned project area is executed in accordance with the project plans and documents. The Project Manager will serve as a liaison with clients and owners and will represent Wagman at meetings. Functions will include planning, scheduling, managing personnel and/or subcontractors, and job cost management. This is a safety sensitive position requiring work on construction sites with various safety hazards inherent in heavy construction. This position is subject to drug testing and compliance policies associated with our status as a Federal Contractor. Wagman is a multi-faceted construction firm with operations in heavy civil, general construction and geotechnical construction services. Founded in 1902, Wagman is a fourth-generation family-owned company with offices in Pennsylvania and Virginia. Wagman Heavy Civil Inc. has grown to become a nationally recognized leader within the industry. Wagman Heavy Civil Inc's core competencies include design-build, infrastructure, marine construction, modified concrete, grooving and grinding and geotechnical construction services. Skills and Qualifications: · Knowledgeable in the following software: Heavy Job, Heavy Bid, Viewpoint, OnBase, Excel, CAD “computer aided drafting”. · Maintain a Valid Driver's License · Ability to communicate in English both written and verbally Essential Functions: Estimating & Job Cost Management Estimating, including plan and document review, takeoff, material quotation, estimate development, and proposal writing. Contract scope of work review and management. Job cost accounting baseline establishment and management to achieve project goals. Monitor job costs constantly to identify any problems resulting in costs above cost as bid so that action may be taken to correct the problem and bring costs in line. Preparation and compilation of project required submittals. Invoicing and collections. Scheduling, Ordering & Management Develop work schedules for projects, sequencing work activities, coordinating activities with the project superintendent and other field supervisory personnel, including engineering staff. Scheduling resources to meet project objectives. Material and subcontractor acquisition in accordance with the project estimate. Coordinate work of subcontractors and vendors and suppliers ensuring that there is delivery of required materials and supplies when needed to perform the work on the site. Setting safety standards for each project and maintaining a safe environment for employees, complying with the high safety standards of the company. Manage, supervise, and mentor other engineers, managers, and field management personnel. Physical Requirements: Able to sit, stand, and walk for extended periods (up to 7 hours). Able to lift and carry up to 30 lbs. occasionally Able to occasionally bend, squat, kneel, and climb (i.e., ladders) throughout the workday. Must be able to perform simple grasping and fine manipulation tasks with both hands. Must be comfortable working outdoors in varying weather conditions (hot, cold, wet, etc.). Ability to travel to project sites and work at heights above 6 feet as necessary. Must have acceptable corrected vision and hearing. Job Benefits: Wagman wants to keep employees and their families happy and healthy and offers a comprehensive benefits package to all full-time employees that includes: Medical/Vision/Dental Insurance Flexible Spending Accounts for Healthcare and Dependent Care Disability and Life Insurance Wellness Programs that include Orthopedic Care 401(k) Retirement Plan with Company Matching Contribution Tuition Reimbursement Adoption Assistance Employee Assistance Program 8 paid holidays Paid Time Off Our Values Wagman's Core Values of integrity, mutual respect, safety, innovation, sense of urgency, and community are an integral part of every decision and every plan made at Wagman and these values have laid the foundation for our success and longevity for our past, present, and future. Consistently being recognized with national and regional awards for projects, safety and community is a testament of our commitment to these values. Beyond the buildings and bridges which connect and improve our communities, Wagman has community engagement programs and initiatives which help to build better, for our people. Wagman Culture Wagman is committed to cultivating a workforce and preserving a culture built on our core values. Our people are our most valuable assets. We value the diverse identities, experiences, perspectives, backgrounds capabilities and talents that our people bring to Wagman. From hiring to training, development, and promotions to special events, Wagman is committed to providing equal and equitable opportunities and rewarding experiences. As a family business providing a safe and healthy work environment in accordance with our mission, we foster diverse and inclusive work experiences and a sense of belonging. Wagman is an affirmative action and equal opportunity employer. We recognize and value our diverse workforce. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. Wagman is proud to be an EEO/AA employer M/F/D/V.

Title: Project Manager Salary Range: $110K-120K Project Types: Commercial/Multi Family Tiello has partnered with a highly successful General Contractor in the Lancaster, PA area on their search for a Project Manager with experience in commercial and multi- family projects. Provide field supervision and management to ensure minimal disruption to our client's staff and residents, that we deliver a high-quality product for a reasonable cost, and that the project is completed on schedule. Duties & Responsibilities: Collaborate with Preconstruction teams during development of project design and scope of work to identify challenges and propose solutions, providing critical input for project planning and contract documents. Work with Preconstruction teams in development of project contract and subcontract agreements. Lead in agreement negotiations ensuring company risk management, fee and pricing goals are achieved. Understand and implement all project contract and subcontract agreements. Lead and manage the development of project teams internally and externally to ensure project quality, schedule and financial goals are exceeded. Manage project staffing to achieve maximum performance and efficiency to meet project goals. Develop and implement construction project schedule to meet contractual obligations and to match team size and skill Facilitate and improve communications between field staff, suppliers, subcontractors, clients, design teams and office management Provide effective and timely management, reporting and feedback of employee, subcontractor, and vendor performance Manage project budget and provide and analyze financial reporting. Make project adjustments to guarantee project cost control. Review job cost reports on a monthly basis and work with the Business Manager to develop monthly billing applications. Follow up with clients to ensure timely receipt of payments. Work with field management to see all quality standards and safety protocols are understood and achieved. Meet project milestones and deadlines with ability to multi- task and manage multiple projects simultaneously. Develop and improve positive client relationships by identifying and exceeding client expectations while maintaining project objectives Skills & Qualifications: Commitment to company Core Values: Bring your very best, Uplift others, Initiate solutions, Look ahead, Do the right thing Bachelor's degree in construction management, engineering, or a similar field plus 8 years in construction project management with GC or related construction experience preferred Time management, organizational skills and ability to multi- task required Strong communication skills with project teams and reports required Understanding of local permit and zoning regulations Experience with Bluebeam and other take- off software (experience with PlanSwift is a plus) Proficient with Excel and Microsoft Office as well as job costing software (experience with Viewpoint Vista is a plus) Applicants must be authorized to work in the U.S. Tiello LLC is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, or any other characteristic protected by law. Your Right to Work - In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire Your Right to Work - In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire

we are seeking a skilled Power Electronics Engineer with strong experience in power electronics design, inverters, and motor control systems. The ideal candidate will have hands-on expertise in hardware design, simulation, prototyping, and testing of power electronic circuits, with a solid understanding of thermal performance and diagnostic instrumentation. Key Responsibilities: Design and develop power electronics front-end circuits and inverter systems Work on IPM motor control and associated power stages Perform simulations and analytical modeling of power electronic circuits Develop and support Hardware-in-the-Loop (HIL) platforms for power electronics validation Design, prototype, and test hardware assemblies Analyze and select inverter switching devices (IGBTs, MOSFETs, etc.) Perform thermal calculations, characterization, and reliability analysis of power structures Conduct hands-on testing using measurement and diagnostic instrumentation Collaborate with cross-functional teams including firmware, mechanical, and systems engineering Support troubleshooting, validation, and design optimization activities Required Qualifications: Bachelor's degree in Electrical Engineering, Electronics Engineering, or a related field 5+ years of experience in power electronics design and development Strong knowledge of inverters, switching devices, and power stages Experience with IPM motor control systems Proficiency in power circuit simulation and analysis Hands-on experience in hardware design, prototyping, and testing Experience using measurement and diagnostic instruments (oscilloscopes, power analyzers, multimeters, etc.) Understanding of thermal design, calculations, and characterization Preferred Skills (Nice to Have): Experience with HIL platforms and validation environments Familiarity with automotive, HVAC, or industrial power electronics systems Knowledge of relevant safety and compliance standards Work Environment: Onsite role based in New Freedom, PA Hands-on engineering lab and prototype development environment

Project Manager Job Opportunity Shift: 1st Shift (M-F) Compensation: $42/hr to $51.60/hr - Paid Weekly Exact compensation may vary based on several factors, including skills, experience, and education. Benefit packages for this role will start on the 1st day of employment and include medical, dental, and vision insurance, as well as HSA, FSA, and DCFSA account options, and 401k retirement account access with employer matching. Employees in this role are also entitled to paid sick leave and/or other paid time off as provided by applicable law. Required Skills & Experience - Project Management Experience - GMP Experience - Bachelor's Degree Nice to Have Skills & Experience - Consumer Product Experience -Oral Care Product Experience Job Description Our Consumer Manufacturing Client is seeking a Manufacturing Project Manager to join their Oral Care team in Lititz, PA. This individual will provide technical and business project leadership across function boundaries for different phases of product development and support programs. This leadership will include projects pertaining to New Product Introduction, Line Qualification for new product launch, and batch qualification for new product launch. This individual will manage the production scale up of products as well as lead the tech transfer process. They will provide documentation of the project and program activities and deliverables.

About Us Trusted Leaders in Disaster Recovery for Over 40 Years Advanced Disaster Recovery, Inc. (Advanced DRI) is the premier restoration company serving the Northeast and Mid-Atlantic regions. With over four decades of experience, we have the size and expertise to handle large-scale losses while maintaining the personalized service of a local partner. Salary: $65,000 - $85,000 - Commission of up to $30,000 per year for hitting minimum expectations The Opportunity As a Project Manager, you'll lead projects from start to finish - overseeing budgets, schedules, crews, and subcontractors - while ensuring safety, quality, and an outstanding customer experience. You'll play a key role in representing our brand, building client trust, and helping our team grow stronger every day. What You'll Do Manage construction projects from inspection through completion Lead and mentor in-house crews and subcontractors Maintain project budgets, timelines, and quality standards Build strong relationships with customers, tenants, and insurance partners Conduct site inspections, document scopes, and resolve challenges proactively Participate in our 24/7 on-call rotation for emergency response What We're Looking For Experience in construction project management or a related field Strong leadership, communication, and organizational skills Tech-savvy with project management software, MS Office, and Google Workspace Ability to thrive in a fast-paced, team-oriented environment Why Join Us Be part of a company that values people first - our team and our customers Opportunities for professional growth and leadership development A collaborative culture where your ideas and contributions matter The chance to make a real impact every day

NOTE: THIS IS A REPOSTING OF CS-2025-38144-13430. IF YOU APPLIED UNDER THE PREVIOUS POSTING WHICH WAS OPEN FROM DECEMBER 16, 2025 TO DECEMBER 30, 2025, YOU CANNOT SUBMIT A NEW APPLICATION. Advance your engineering career with the Department of Corrections (DOC)! As an Electrical Engineer Consultant for the Bureau of Operations, you will be central to managing construction projects working with licensed engineers and internal teams. We are looking for experts eager to collaborate across state departments and apply their skills to meaningful work. Apply today to shape the future of Commonwealth infrastructure! DESCRIPTION OF WORK As an Electrical Engineer Consultant, you will be responsible for utilizing your knowledge of electrical engineering principles and methods to develop solutions for a variety of operational, maintenance, design, and construction challenges. Your duties will involve representing the bureau on construction projects, working with outside professional engineers and architects, and advising other disciplines within the bureau and agency on a range of projects. You will also assist in the construction and modification of various facilities, such as those related to security, food services, plant maintenance, safety, environmental energy, conservation, and building modifications to improve functionality and utility plant operations. This role requires a strong understanding of electrical engineering principles and the ability to effectively communicate and collaborate with a wide range of professionals. Interested in learning more? Additional details regarding this position can be found in the position description. Work Schedule and Additional Information: Full-time employment, 37.5 hours per week Work hours are 7:30 AM to 3:30 PM, Monday - Friday, with a 30-minute lunch. Telework: You may have the opportunity to work from home (telework) part-time up to 3 days per week after successful completion of a 6-month training period. In order to telework, you must have a securely configured high-speed internet connection and work from an approved location inside Pennsylvania. If you are unable to telework, you will have the option to report to the headquarters office in Mechanicsburg. The ability to telework is subject to change at any time. Salary: In some cases, the starting salary may be non-negotiable. You will receive further communication regarding this position via email. Check your email, including spam/junk folders, for these notices. REQUIRED EXPERIENCE, TRAINING & ELIGIBILITY QUALIFICATIONS Minimum Experience and Training Requirements: Two years as an Electrical Engineer 2 (Commonwealth job title or equivalent Federal Government job title, as determined by the Office of Administration); or Four years of professional electrical engineering experience which required work on any structural electrical system. Special Requirement: You must possess a Professional Engineer license issued by the Pennsylvania State Registration Board for Professional Engineers, Land Surveyors and Geologists. Condition of Employment: This position requires possession of a valid driver's license. Other Requirements: Successful completion of basic training in Elizabethtown, PA is required. PA residency requirement is currently waived for this title. You must be able to perform essential job functions. Legal Requirement: You must pass a background investigation and meet Criminal Justice Information Services (CJIS) compliance requirements. How to Apply: Resumes, cover letters, and similar documents will not be reviewed, and the information contained therein will not be considered for the purposes of determining your eligibility for the position. Information to support your eligibility for the position must be provided on the application (i.e., relevant, detailed experience/education). Your application must be submitted by the posting closing date . Late applications and other required materials will not be accepted. Failure to comply with the above application requirements may eliminate you from consideration for this position. Veterans: Pennsylvania law (51 Pa. C.S. *7103) provides employment preference for qualified veterans for appointment to many state and local government jobs. To learn more about employment preferences for veterans, go to ************************************************ and click on Veterans. Telecommunications Relay Service (TRS): 711 (hearing and speech disabilities or other individuals). If you are contacted for an interview and need accommodations due to a disability, please discuss your request for accommodations with the interviewer in advance of your interview date. The Commonwealth is an equal employment opportunity employer and is committed to a diverse workforce. The Commonwealth values inclusion as we seek to recruit, develop, and retain the most qualified people to serve the citizens of Pennsylvania. The Commonwealth does not discriminate on the basis of race, color, religious creed, ancestry, union membership, age, gender, sexual orientation, gender identity or expression, national origin, AIDS or HIV status, disability, or any other categories protected by applicable federal or state law. All diverse candidates are encouraged to apply. EXAMINATION INFORMATION Completing the application, including all supplemental questions, serves as your exam for this position. No additional exam is required at a test center (also referred to as a written exam). Your score is based on the detailed information you provide on your application and in response to the supplemental questions. Your score is valid for this specific posting only. You must provide complete and accurate information or: your score may be lower than deserved. you may be disqualified. You may only apply/test once for this posting. Your results will be provided via email.

About Aerospace, Defense & Marine (AD&M) TE's Aerospace, Defense & Marine (AD&M) business unit, part of our Industrial Solutions segment, is a global leader in designing high-performance electrical interconnect solutions for the world's most demanding environments. Our technologies enable critical applications - from avionics, propulsion systems, and flight controls to naval vessels, ground vehicles, and space exploration. From the ocean's depths to the edge of space, TE delivers reliable connectivity that performs in the harshest conditions on Earth. Position Summary TE Connectivity's Aerospace, Defense & Marine (AD&M) division is seeking an experienced Staff Manufacturing Engineer to join our team in Mount Joy, PA. In this hands-on leadership role, you will drive the design, optimization, and continuous improvement of manufacturing processes for precision electrical connectors used in aerospace and defense applications. You'll work closely with production, tooling, quality, and maintenance teams to ensure robust, efficient, and cost-effective operations. This role directly supports advanced manufacturing technologies including manual and automated contact insertion, crimping, impact cold forming, pressing, and bonding - making it ideal for an engineer experienced in connector assembly and high-reliability production environments. Key Responsibilities Lead process design, development, and validation for new and existing connector manufacturing operations. Drive continuous improvement in safety, quality, delivery, and cost through Lean and Six Sigma methodologies. Develop and maintain process documentation, including PFMEAs, control plans, and standard work instructions. Optimize assembly, cold forming, die designm and press operations to enhance yield, throughput, and OEE. Identify and implement automation and semi-automation opportunities to reduce variability and improve labor efficiency. Support design-for-manufacturing (DFM) efforts during new product introduction. Lead root-cause analysis and implement corrective actions for process deviations and nonconformances. Collaborate with maintenance and tooling teams to ensure equipment reliability and technical readiness. Prepare business cases and cost-benefit analyses to justify new capital investments, ensuring alignment with ROI targets, operational strategy, and capacity planning. Justify, specify, and support the installation of new capital equipment to advance manufacturing capabilities. What your background should look like • Bachelor's degree in Mechanical, Manufacturing, or Industrial Engineering (or related technical discipline). • 10+ years of manufacturing engineering experience in a high-mix, precision assembly environment. • Strong background in stamping, impacting, high speed contact stitching, or metal forming processes preferred. • Preferred experience in contact insertion, crimping, and automated connector assembly machines within the electrical connector industry. • Hands-on experience with press-fit, bonding, and automated assembly systems. • Advanced expertise in CAD modeling and design (Creo or SolidWorks), including the creation of tooling, fixtures, and detailed manufacturing layouts. • Demonstrated ability to justify and secure capital investment through data-driven analysis, ROI modeling, and strategic planning in a manufacturing environment. • Deep knowledge of Lean Manufacturing, Six Sigma, and SPC; Green Belt required, Black Belt preferred. • Strong analytical, problem-solving, and communication skills with a focus on cross-functional collaboration. • Familiarity with Import and Export process for production tooling in ITAR facility is a plus. • Ability to lead complex projects independently and mentor junior engineers or technicians. • Experience with industrial robots and vision systems is a plus. • Working experience in SAP or other ERP systems is a plus. • Strong written and verbal communication skills. Competencies Values: Integrity, Accountability, Inclusion, Innovation, Teamwork ABOUT TE CONNECTIVITY TE Connectivity is a global industrial technology leader creating a safer, sustainable, productive, and connected future. Our broad range of connectivity and sensor solutions enable the distribution of power, signal and data to advance next-generation transportation, renewable energy, automated factories, data centers, medical technology and more. With more than 85,000 employees, including 8,000 engineers, working alongside customers in approximately 140 countries. TE ensures that EVERY CONNECTION COUNTS. Learn more at ********** and on LinkedIn, Facebook, WeChat, Instagram and X (formerly Twitter). COMPENSATION • Competitive base salary commensurate with experience: $121,600 - $182,300 (subject to change dependent on physical location) • Posted salary ranges are made in good faith. TE Connectivity reserves the right to adjust ranges depending on the experience/qualification of the selected candidate as well as internal and external equity. • Total Compensation = Base Salary + Incentive(s) + Benefits BENEFITS • A comprehensive benefits package including health insurance, 401(k), disability, life insurance, employee stock purchase plan, paid time off and voluntary benefits. EOE, Including Disability/Vets IMPORTANT NOTICE REGARDING RECRUITMENT FRAUD TE Connectivity has become aware of fraudulent recruitment activities being conducted by individuals or organizations falsely claiming to represent TE Connectivity. Please be advised that TE Connectivity never requests payment or fees from job applicants at any stage of the recruitment process. All legitimate job openings are posted exclusively on our official careers website at te.com/careers, and all email communications from our recruitment team will come only from actual email addresses ending **********. If you receive any suspicious communications, we strongly advise you not to engage or provide any personal information, and to report the incident to your local authorities. Job Locations: Mount Joy, Pennsylvania 17552 United States Posting City: Mount Joy Job Country: United States Travel Required: Less than 10% Requisition ID: 142024 Workplace Type: External Careers Page:

Who We Are: Advanced Cooling Technologies, Inc. (ACT) is a premier thermal solutions provider serving many diverse markets including Defense, Aerospace, High-Performance Computing, Power Electronics, Medical and HVAC industries. We provide thermal products and engineering services to the world's leading defense and commercial companies such as Intel, Hewlett Packard (HP), GE Healthcare, Google, Facebook, Lockheed Martin, Northrop Grumman, Boeing, and General Electric. We also conduct advanced research and development work for government agencies including NASA, DOD, and DOE. Our products and technologies have become integral parts of numerous mission-critical devices, from life-saving MRI and CT scanners to energy-efficient building HVAC systems to weather and telecommunications satellites, and even Lunar Rovers and Landers. ACT is strongly committed to our customers, employees, and our community. Innovation, Teamwork and Customer Care are our core values that drive the continuous growth of our company. Our skilled and dedicated staff is our strongest resource and the critical factor in our ongoing success. Position summary: The Product Development Engineer in our Vaporization and Refrigeration group supports various phases of Environmental Control Unit (ECU) and Liquid Chiller projects ranging from concept generation and initial design to prototype hardware fabrication and volume production. The types of projects vary from modifications of existing designs to "blank sheet of paper" development programs and advanced performance testing. At any given time, the Product Development Engineer is responsible for the success of multiple projects, providing the opportunity to work on all aspects of the product development cycle. Product Development Engineers work on a multi-disciplinary team including Electrical Engineering resources and CAD Designers to effectively develop complex systems. Candidates that have a strong technical background with experience in design for manufacturability of complex systems excel at this position. Responsibilities Include: * All aspects of initial product design including: * Innovative concept generation * Excel or hand calculation analytical analysis * Refrigeration (Vapor Compression) system design and component selection * Refrigeration schematic generation * Requirements and Verification Matrix (RVM) generation and review * 3-D CAD modeling (SolidWorks) * 2-D Drawing creation * CFD/FEA analysis for mechanical/thermal/hydraulic performance prediction * Fabrication procedure and work instruction development * Working with a diverse group of engineers and technicians * Managing program schedules and budget * Frequent customer communication Our work environment demands a candidate with the ability to take on multiple responsibilities in a fast-paced environment. We are looking for team players who enjoy working with customers, vendors, and co-workers to provide the best service and solutions. The best candidates will be those who embrace new challenges, using critical thinking skills, and developing innovative solutions. The ideal candidate will possess the following qualities: Initiative: Product Development engineers don't have a daily agenda given to them and are expected to take it upon themselves to work closely with customers, vendors and ACT personnel to fulfill projects goals and objectives. Technical knowledge: We are looking for a candidate who has a strong real-world engineering background, coupled with hands-on skills and fabrication and testing capabilities. Teamwork skills: As a member of the product development team, the ideal candidate must have the ability to give and receive encouragement and constructive criticism, communicate effectively, and work cooperatively with team members to achieve common goals. Critical thinking skills: The product development customer and projects vary widely, and the strategies and design approaches that worked for one program may be completely different for the next opportunity. Because of that, we need a curious individual who loves to dive in, experiment, and develop innovative solutions to new challenges. Desire to grow: The ideal candidate wants to be the best at their job and is never content with "good enough". They set lofty goals and constantly seek to improve themselves and expand their professional knowledge and skillset. They desire to sharpen their engineering and project management skills and grow in leadership ability and responsibility. ACT is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, status as a qualified individual with a disability, or any other trait protected by law. Requirements * US citizenship or permanent residency strongly preferred due to ITAR requirements * B.S. or M.S. degree in Mechanical Engineering or another relevant field * Basic understanding of refrigeration systems * Proficiency in using commercial CAD (Solidworks) and FEA (Solidworks) tools, along with refrigeration system design tools * 3-5 years of hands-on experience with design for manufacturability (DFM) and prototype hardware fabrication and testing * Good verbal and written communication skills

Electrical Project Engineer Direct Hire Lancaster, PA 65,000.00 - 80,000.00 + Company paid health, vision, and dental insurance Short-term disability, long-term disability, and life insurance/AD&D policies Paid holidays Paid time off 401k with 5% company match Periodic employee performance reviews Bonus Structure Advancement Opportunities Duties and Responsibilities: * Provide technical support to a project team to expose, track, resolve, and notate project issues * Manage all project documents through the document control team * Process and track submittals and RFI's * Assist in the coordination of planning and fabrication activities * Support Procurement in the distribution of bidding documents and tracking of quotations * Maintain project schedule via the Enterprise Scheduling Department * Prepare and issue meeting minutes * Assist with planning and managing site logistics * Implement corporate safety policies on jobsite * Receive, review, and evaluate subcontractor quotations * Assist in the tracking of change orders and cost management * Manage plan review and approval process with local and state municipalities * Process new hire documents and verify accuracy of the site payroll submission * Participate in continuous learning, training, and skill development * Ability to travel and/or temporarily relocate based on project needs * Willingness to work in both office and on-site environments * Perform tasks at the discretion of the project management team Preferred Qualifications * One to three (1-3) years of relevant construction experience * Bachelor's degree in Engineering, Construction Management, or Business Administration or a technical college degree with two (2) years construction experience * Data Center, Healthcare, Automotive, and/or Light Industrial experience * Excellent written and verbal communication skills * Excellent organizational skills and attention to detail * Positive attitude with an aptitude for proactive and team-oriented problem solving * Proficient with Microsoft Office Suite and related construction software * Commitment to Safety Note: Chosen applicant will be subject to a drug screen and Motor Record Vehicle check as a condition of employment. #LI-JJ1

TAIT partners with artists, brands, IP holders and place makers to bring culture-defining, never-before-seen experiences to life. With a legacy of innovation spanning over 45 years, TAIT has grown from pioneering in rock 'n' roll concert staging to setting the global standard for extraordinary live events and experiences through cutting-edge technology, precision engineering, and creative design. TAIT's 20 global offices have developed iconic productions and experiences in over 30 countries, all seven continents, and even outer space for renowned performers, theme parks, exhibits, and venues across the globe, including partnerships with Taylor Swift, Cirque Du Soleil, Royal Opera House, Nike, NASA, Bloomberg, Google, Beyoncé, and The Olympics **Position Purpose** Mechanical Design Engineers (MDE) at TAIT are responsible for project-based mechanical design work that focuses on specialized machinery, structures, and rigging systems for the entertainment technology industry. MDEs drive innovative technical solutions, while working within TAIT safety and quality processes, as well as leveraging TAIT standard design principles and practices. As part of the wider mechanical design and engineering team, this role will focus on owning specific subsections of projects, which we call elements. This role is a bridge between associate/entry-level roles (which focus on part-level drawings) and senior/experienced roles (which focus on project-level solutions). The MDE team collaborates across departments (project management, fabrication, procurement, field teams) to ensure project success, from "initial concept" through "opening night." **Essential Responsibilities / Accountabilities** + Collaborate with project teams to develop innovative and effective technical solutions that align with project objectives and exceed client expectations. + Plan and execute technical solutions to work within scope, schedule, and budget. + Apply TAIT design best practices to design for fit and finish, manufacturing efficiency, onsite assembly + disassembly, and packaging. + Identify and understand the underlying physics of complex problems to create successful technical solutions. + Identify and prioritize project specific requirements and constraints to drive technical solutions. + Apply TAIT Project Delivery best practices and processes including design reviews, project team meetings, use of planning systems/software, + Participate in client meetings and produce client-facing drawing packages as needed. + Communicate effectively through hand sketches, 2D CAD drawings and cross sections. + Efficiently generate robust and clean 3D models to support TAIT's collaborative design process. + Produce pitch studies, schematics, storyboards, weight studies, and other supporting tasks to advance the design + engineering process. + Identify appropriate timing and scale of prototyping to support design + engineering process. + Recognize aspects of project work requiring engineering rigor to collaborate with internal and external engineering review on assigned project work. + Identify long lead time items and work with purchasing department to procure project specific components and materials. + Use custom TAIT CAD tools as appropriate in design and detailing processes. + Maintain project documentation including drawing redlines and operation manuals as required. + Release assembly and part drawings to be manufactured internal to TAIT as well as through subcontracting vendors using appropriate dimensioning and tolerancing. + Efficiently solve technical issues as they may arise during fabrication, testing, and/or commissioning. + Support legacy TAIT equipment as required by project needs and/or support department requests. + Maintain awareness of standard of solutions within TAIT's markets, product lines, and platforms. + Maintain awareness of TAIT's markets and competition. To perform this position successfully, each essential responsibility/accountability must be fulfilled satisfactorily. Reasonable accommodation may be made to enable an individual with disabilities to perform the responsibilities and accountabilities outlined above. Other duties may be assigned to meet business needs. **Minimum Qualifications** + Formal degree in Technical Theater, Engineering, Architectural, Industrial Design, Machine Design, CADD preferred, or High School Diploma/GED and equivalent work experience listed below: + Design Experience: minimum 7 years with formal degree + Design Experience: minimum 9 years without formal degree + Background in 3D CAD modeling + Working knowledge of live entertainment technology + Experience working in a short-term, project-based environment + Success collaborating as part of a cross-functional team + Ability to be based in the Lititz, PA TAIT headquarters **Preferred Experience** + Parametric modeling, ideally using Autodesk Inventor + Building information modeling (BIM) + Design for manufacture (DFM), especially aluminum structures and electro-mechanical machines + Rigging, especially theatrical rigging, arena rigging, performer flying, or catenary systems + TAIT markets, especially concert touring and theme parks + TAIT technology, especially winches, trolleys, and other overhead machinery/structures **Working Conditions and Physical Effort** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to sit and use hands to finger, handle, or feel objects, tools, or controls. The employee frequently is required to reach with hands and arms and talk or hear. Specific vision abilities required by this job include close vision, color vision, and peripheral vision. The employee regularly operates a computer, including typing, using a mouse or keyboard, and viewing the screen for extended periods. While the role does not require regular lifting or physical exertion, there may be occasional onboarding programs or training opportunities that create opportunities for more exposure to physical tasks or new environments (sites, venues, etc.) **Work conditions of the role are:** + Work conditions may involve moderate exposure to unusual elements such as dirt, dust, fumes, unpleasant odors, and/or loud noises. + Work environment involves some exposure to hazards or physical risks which require following basic safety precautions. + Must be able to wear and properly utilize appropriate personal protective equipment (PPE) to work within or visit areas where required. This includes safety glasses, reflective vest, ear plugs, safety toed shoes, and other PPE as required by the location. \#LI-AW1 TAIT is an equal opportunity employer fully committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected characteristic as outlined by international, national, state, or local laws.

The importance of water to the health of our world can't be overstated. As the frequency and intensity of floods, droughts and storms increases, the water industry must continue to build resiliency and lead from the front. Together with our clients, we are thinking and doing things differently to help pre-empt and prepare for what's next. Be a part of this dynamic and committed team of diverse water specialists and drive change for your community. You'll be able to apply our powerful global network of skills and decades of experience to create positive water outcomes that respect nature and nurture communities. Who are we looking for? Our Northeast Water business is expanding, and we're excited to welcome several talented Project Engineers to our offices in Harrisburg, Bloomsburg, and King of Prussia, PA. This is your opportunity to make a meaningful impact on water, wastewater, utility, and infrastructure design projects that shape communities across the region. As a Project Engineer, you'll play a key role in delivering innovative solutions alongside a dynamic, multi-disciplinary team. In this role, you will assist with preparing technical reports, design drawings, contract documents, cost estimates, and permits. You'll lead and support client workshops focused on advancing technical studies and designs, while also developing project delivery strategies and job management plans to ensure compliance with QA standards. Your work will involve supporting pricing, estimating, scoping, and marketing strategies for new projects, as well as coordinating CAD teams to produce high-quality design and construction documents. You'll conduct field investigations and condition assessments to identify process improvements, manage communication on technical and contractual issues, and facilitate client meetings to keep projects on track. This is more than just a job-it's a chance to grow your career while contributing to sustainable water solutions that matter. If you're passionate about engineering excellence and ready to take on challenging, rewarding projects, we'd love to hear from you! Our Hybrid Work Model: Be part of the dynamic culture! Our workplace thrives on a hybrid model, combining in-office collaboration and flexibility. Join us in the office three days a week to contribute, connect and excel in our vibrant environment. Working with an energetic and high performing team, this position offers a variety of work and will see you involved in: Engineering Drawings: Create engineering drawings to support the communication, evaluation, and implementation of engineering solutions. Engineering Solutions Design: Contribute to the design of engineering solutions; design the feasibility testing approach and supervise its implementation to support the development and validation of engineering solutions. Health, Safety, and Environment: Follow the organization's health, safety, and environment (HSE) policies, procedures, and mandatory instructions to identify and mitigate environmental risks and risks to the well-being of self and others in the workplace. Identify patterns of risky behavior within the team and take appropriate action to resolve them, escalating serious issues as appropriate. Personal Capability Building: Develop own capabilities by participating in assessment and development planning activities as well as formal and informal training and coaching; gain or maintain external professional accreditation, where relevant, to improve performance and fulfill personal potential. Maintain an understanding of relevant technology, external regulation, and industry best practices through ongoing education, attending conferences, and reading specialist media. Research: Carry out a range of research activities either to support others or to fulfill the requirements of the role. Technical Troubleshooting: Support technical troubleshooting efforts, aiding in the quick and accurate identification, analysis, and resolution of technical issues with equipment and experiments. Project Management: Work within an established project management plan to achieve specific goals. Client & Customer Management (External): Help senior colleagues manage client and customer relationships by using relevant sales or client systems. What you will bring to the team: Bachelor's and/or Master's degree in Civil or Environmental Engineering Registered Pennsylvania Professional Engineer or ability to obtain it At least 3-7 years of municipal water experience including experience in the state of Pennsylvania; prior water and wastewater design experience with local municipalities a plus Stormwater design and MS4 planning a plus #LI-JK1 As a multicultural organization, we encourage individual achievement and recognize the strength of a diverse workforce. GHD is an equal opportunity employer. We provide equal employment opportunities to all qualified employees and applicants without regard to race, color, religion, genetic information, national origin, sex (including same sex), sexual orientation, gender identity, pregnancy, childbirth, or related medical conditions, age, disability or handicap, citizenship status, service member status, or any other category protected by federal, state, or local law.

Job Description Job Type: Full-time, Exempt Duration of role: Permanent 1 Reporting to: Senior Engineering Project Manager About Us At Tate we are passionate about everything we do. As an independent brand operating within Kingspan Group, a global plc group of companies, Tate has been recognized worldwide as an industry leader in the development and manufacture of data center infrastructure solutions and commercial office raised access floors, for over 60 years. With revenues of over $600m and growing, Tate plays a pivotal role in offering expertise in cutting edge design engineering in order to craft solutions, by working collaboratively with clients as a trusted partner. Tate continues to grow and expand, operating multiple manufacturing and commercial sites across the US, Europe, the Middle East, Asia, and Australia. We are excited about our fresh, dynamic, and inclusive team of experts working on new innovations and forward-thinking designs, as we remain a market leading player within our industry. We continue to invest heavily in the best available manufacturing tools and equipment needed to adhere to Tate's world class standards and in keeping with our Planet Passionate sustainability strategy, our focus is on having minimal climate impact. We are excited to potentially welcome you as part of our team as we continue to grow on a worldwide scale. About the Role We are seeking a proactive and technically skilled Project Engineer (Mechanically Biased) to support the delivery of manufacturing projects from concept through to completion. The ideal candidate will be comfortable working with minimal guidance, taking ownership of tasks, while also contributing effectively as part of a multidisciplinary project team. What You'll Do Support the planning, coordination, and execution of engineering aspects of projects, including design, installation, testing, and commissioning. Review and interpret drawings, specifications, and technical documents. Coordinate with mechanical, controls, and civil disciplines to ensure full project integration. Liaise with suppliers, contractors, and clients to ensure technical and schedule requirements are met. Monitor progress against project timelines and budgets; escalate risks or deviations as needed. Prepare documentation such as risk assessments, method statements, and technical reports. Ensure all work complies with relevant codes, standards, and safety regulations. Participate in design reviews, site meetings, and commissioning activities. Identify opportunities for process improvement or cost reduction. Additional Expectations Remain compliant with the Code of Conduct and Policies which includes the Kingspan Group Compliance Policy. Ensure that all duties related to product compliance are adhered to in accordance with the Product Compliance Policy, Laws, Regulations, and market demands. Responsible for all tasks to achieve compliance goals and demands of the Compliance Management System. Must raise concerns related to the Compliance Management System to their supervisor, manager, or any member of the Leadership Team, or through the confidential whistle blower service. What You'll Bring Bachelor's degree or equivalent qualification in Engineering or related field. 2+ years' experience in an industrial, manufacturing, or capital project environment. Familiarity with project documentation, commissioning processes, and regulatory standards. Experience with CAD software or electrical design tools is desirable. Excellent problem-solving and communication skills. Ability to manage priorities and work effectively with limited supervision. Willingness to travel to project sites as required. Competencies: Self-motivated, organized, and able to work independently. Collaborative mindset and able to work seamlessly in team environments. Practical, hands-on approach with attention to detail. Committed to safety, quality, and continuous improvement. What You'll Get Pay range: $80,000 USD to $110,000 USD. This role is eligible for a discretionary bonus. Career Scope and Advancement: As we grow, new positions and career opportunities arise, offering accelerated paths for the right candidates, locally and globally. World of Wellness Philosophy: We empower you to take charge of your health and well-being. You'll have access to a wide range of medical, dental, and vision benefits, along with personalized guidance from a “Health Advocate.” We also offer other supplemental options, including 401k, legal, disability, and theft insurance, to ensure your financial wellness. Corporate Social Responsibility: Through Planet Passionate we are determined to reduce our manufacturing carbon (CO2e) emissions to as close to zero as technically possible, together with halving carbon intensity in our primary supply chain. We are very involved in our community, and you will have ample opportunities to support us in creating a better world. Skills Development: Given the dynamic pace of our business and a strong collaborative environment, your new role will be diverse and multifaceted - allowing you to be more versatile and develop a broader skill set. Mentorship and development: At Tate, we don't believe in hierarchy, we work together as one team for one common goal. You will have access and exposure to our senior leaders and experts for learning in your role, and additionally mentorship for the future. Culture: We have a great team culture, highly collaborative, supportive, and social. Together we innovate, collaborate, take ownership, and strive for excellence. Stay connected with us on LinkedIn for insights into life at Tate. Join us in our mission to make a difference through exceptional solutions. Tate Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to legally protected characteristics. We are committed to providing reasonable accommodations to qualified individuals with disabilities. Employment may be contingent upon completion of post-offer requirements in accordance with applicable law.

**About the Role:** Join TAI's Electrical and Controls Engineering Group as an Engineer III and take the lead in detailed electrical and process controls design for diverse projects. You'll drive work across the full project lifecycle, from conceptual design and cost estimation to construction administration and system commissioning, while ensuring compliance with industry codes and coordinating with multiple engineering disciplines. This is an excellent opportunity for a highly experienced engineer with a strong background in automation control systems to make a significant impact. **About TAI:** TAI is a full-service, multi-disciplinary engineering and construction firm built to scale; delivering mission-critical, integrated solutions across the full design-build-maintain lifecycle. For more than 35 years, TAI has partnered with leading organizations in advanced manufacturing, life sciences, food and beverage, energy, and government to design, build, and sustain complex facilities and infrastructure. TAI brings deep expertise across five core service pillars: Engineering, Construction, Systems Integration, On-Site Services, and Technical Services. Our unified approach combines precision engineering, field execution, and technical depth to deliver end-to-end results that drive reliability, safety, and long-term value for our clients. Team members at TAI are capable, well-rounded, flexible, and optimistic. We have found that the best employees are the ones who recognize the importance of what they do and the ones who let that guide them in the actions they take. More than any skill, we seek people who make decisions that support the common good. We work for our clients, and we work for one another. **Here's a glimpse into your day to day:** + Individuals in this position are responsible for planning, organizing, and performing detailed electrical and controls design and support management of engineering activities. + This position receives general administrative direction from the division manager and is responsible for process controls design of multiple projects of varying complexity. + Research applicable industry standards, prepare engineering studies, analysis of systems, preliminary and detailed engineering designs. + Develop engineering specifications and project cost estimates. + Review work of project design team, check progress of work and alert managers to change of scope and additional services. + Coordinate most aspects of project document completion. + Direct CAD designers for the preparation of construction drawings. + Interpret and apply applicable codes. + Independently work with code officials and other design professionals when an interpretation or exception to codes is required. + Coordinate project design with other engineering disciplines. **You'll be a perfect fit if you have:** + Bachelor's degree from an accredited university; Electrical, Mechanical or Chemical Engineering + Professional Engineer licensure is preferred + Minimum of Seven (7) years of controls design experience. + Ability to communicate with customers to gather critical information. + Working Knowledge of NEC (NFPA 70). + Effectively manage multiple ongoing project and tasks. + Assure compliance with company and client CAD standards. + Capable of performing field surveys in order to document existing conditions. + Review construction packages from designers for company and department standards. + Capable of specifying, designing, programming and maintaining automation control systems for industrial, power, oil & gas, manufacturing, pharmaceutical, food & beverage facilities with significant expertise in at least one of the core industries served by TAI + Capable of specifying both digital and analog instrumentation (Level, Flow, Pressure, Temperature, Analytical - pH, LEL, O2, CO, CO2, etc.) and integrate to construction and panel drawing sets. + Capable of specifying Electrical Component and Field Devices (combination starters, VFD's, MCC's, pushbuttons/selector switches, heat trace, etc.) + Capable of designing, reviewing and approving Electrical Construction Drawing sets including but not limited to instrument location plan, conduit block and network architecture drawings + Capable of designing, reviewing and approving PLC control panel and motor control panel drawings + Capable of with specification and programming of controls systems including Rockwell family of processors and HMI's, ability to program new applications and modify existing applications with ample annotation for future reference + Working knowledge of TCP/IP, Modbus, Profibus and other industrial communication protocols + Experience programming Wonderware, IFix, Maple, Delta V, Siemens, Omron, Modicon, Mitsubishi and Koyo is a plus + Experience programming SCADA and SQL is a plus + Working knowledge of and ability to specify control systems for use in hazardous area locations as identified by NFPA 70 + Working knowledge of ISA standards and ability to interpret and contribute to development of P&ID + Working knowledge of and ability to design robust safety circuits and specify components of varying industry requirements + Working knowledge of NFPA 79 _Candidates must have experience with at least one of the following software:_ + Rockwell RSLogix 5, RSLogix500, RSLogix5000, FactoryTalk View SE & ME, RSlinx, Siemens PLC, Iconics Genesis 64, Design S + Microsoft Office applications - Word, Excel, PowerPoint and Project + AutoCAD (ability to open drawings, navigate, edit text, and print) + Masterspec **Compensation and Benefits:** + Pay: $95,000-105,000 annually (based upon experience) + Annual Profit Sharing Bonus (variable) + PTO and Paid Holidays + Health Benefits: Employee through family level coverage for medical, dental, and vision insurances. Company funded life and long-term disability insurances. Short Term Disability, FSA, HSA, EAP, and supplemental life insurances (employee - family) are also available! + 401(k)with employer match **Other Offerings:** + The opportunity to make a real impact on a variety of industry-leading projects. + The ability to balance your work and family activities. + Flexible work schedule + Work in a dynamic and collaborative environment that values creativity and innovation. + A chance to learn and grow alongside some of the brightest minds in engineering. + Professional Development, Tuition Reimbursement, and Association Membership Reimbursements. Discover what makes TAI a top-20 manufacturing partner, according to Engineering News-Record (ENR), and one of the top-50 fastest-growing private companies in the Baltimore Business Journal. Learn more about us at *********************** TAI provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

About the Role: Join TAI's Electrical and Controls Engineering Group as an Engineer III and take the lead in detailed electrical and process controls design for diverse projects. You'll drive work across the full project lifecycle, from conceptual design and cost estimation to construction administration and system commissioning, while ensuring compliance with industry codes and coordinating with multiple engineering disciplines. This is an excellent opportunity for a highly experienced engineer with a strong background in automation control systems to make a significant impact. About TAI: TAI is a full-service, multi-disciplinary engineering and construction firm built to scale; delivering mission-critical, integrated solutions across the full design-build-maintain lifecycle. For more than 35 years, TAI has partnered with leading organizations in advanced manufacturing, life sciences, food and beverage, energy, and government to design, build, and sustain complex facilities and infrastructure. TAI brings deep expertise across five core service pillars: Engineering, Construction, Systems Integration, On-Site Services, and Technical Services. Our unified approach combines precision engineering, field execution, and technical depth to deliver end-to-end results that drive reliability, safety, and long-term value for our clients. Team members at TAI are capable, well-rounded, flexible, and optimistic. We have found that the best employees are the ones who recognize the importance of what they do and the ones who let that guide them in the actions they take. More than any skill, we seek people who make decisions that support the common good. We work for our clients, and we work for one another. Here's a glimpse into your day to day: * Individuals in this position are responsible for planning, organizing, and performing detailed electrical and controls design and support management of engineering activities. * This position receives general administrative direction from the division manager and is responsible for process controls design of multiple projects of varying complexity. * Research applicable industry standards, prepare engineering studies, analysis of systems, preliminary and detailed engineering designs. * Develop engineering specifications and project cost estimates. * Review work of project design team, check progress of work and alert managers to change of scope and additional services. * Coordinate most aspects of project document completion. * Direct CAD designers for the preparation of construction drawings. * Interpret and apply applicable codes. * Independently work with code officials and other design professionals when an interpretation or exception to codes is required. * Coordinate project design with other engineering disciplines. You'll be a perfect fit if you have: * Bachelor's degree from an accredited university; Electrical, Mechanical or Chemical Engineering * Professional Engineer licensure is preferred * Minimum of Seven (7) years of controls design experience. * Ability to communicate with customers to gather critical information. * Working Knowledge of NEC (NFPA 70). * Effectively manage multiple ongoing project and tasks. * Assure compliance with company and client CAD standards. * Capable of performing field surveys in order to document existing conditions. * Review construction packages from designers for company and department standards. * Capable of specifying, designing, programming and maintaining automation control systems for industrial, power, oil & gas, manufacturing, pharmaceutical, food & beverage facilities with significant expertise in at least one of the core industries served by TAI * Capable of specifying both digital and analog instrumentation (Level, Flow, Pressure, Temperature, Analytical - pH, LEL, O2, CO, CO2, etc.) and integrate to construction and panel drawing sets. * Capable of specifying Electrical Component and Field Devices (combination starters, VFD's, MCC's, pushbuttons/selector switches, heat trace, etc.) * Capable of designing, reviewing and approving Electrical Construction Drawing sets including but not limited to instrument location plan, conduit block and network architecture drawings * Capable of designing, reviewing and approving PLC control panel and motor control panel drawings * Capable of with specification and programming of controls systems including Rockwell family of processors and HMI's, ability to program new applications and modify existing applications with ample annotation for future reference * Working knowledge of TCP/IP, Modbus, Profibus and other industrial communication protocols * Experience programming Wonderware, IFix, Maple, Delta V, Siemens, Omron, Modicon, Mitsubishi and Koyo is a plus * Experience programming SCADA and SQL is a plus * Working knowledge of and ability to specify control systems for use in hazardous area locations as identified by NFPA 70 * Working knowledge of ISA standards and ability to interpret and contribute to development of P&ID * Working knowledge of and ability to design robust safety circuits and specify components of varying industry requirements * Working knowledge of NFPA 79 Candidates must have experience with at least one of the following software: * Rockwell RSLogix 5, RSLogix500, RSLogix5000, FactoryTalk View SE & ME, RSlinx, Siemens PLC, Iconics Genesis 64, Design S * Microsoft Office applications - Word, Excel, PowerPoint and Project * AutoCAD (ability to open drawings, navigate, edit text, and print) * Masterspec Compensation and Benefits: * Pay: $95,000-105,000 annually (based upon experience) * Annual Profit Sharing Bonus (variable) * PTO and Paid Holidays * Health Benefits: Employee through family level coverage for medical, dental, and vision insurances. Company funded life and long-term disability insurances. Short Term Disability, FSA, HSA, EAP, and supplemental life insurances (employee - family) are also available! * 401(k)with employer match Other Offerings: * The opportunity to make a real impact on a variety of industry-leading projects. * The ability to balance your work and family activities. * Flexible work schedule * Work in a dynamic and collaborative environment that values creativity and innovation. * A chance to learn and grow alongside some of the brightest minds in engineering. * Professional Development, Tuition Reimbursement, and Association Membership Reimbursements. Discover what makes TAI a top-20 manufacturing partner, according to Engineering News-Record (ENR), and one of the top-50 fastest-growing private companies in the Baltimore Business Journal. Learn more about us at ***********************

As a Project Engineer Foundry Intern, you will support process improvement initiatives and participate in kaizen events aimed at enhancing operational efficiency within the foundry. You will assist in project management tasks, including developing project scopes, obtaining vendor quotes, and overseeing small projects. Additionally, you will be responsible for reviewing and updating work instructions and procedures to ensure they are accurate and up to date. How You Will Help * Process Improvements - Review and become familiar with selected process improvement projects and activities. * Participate in kaizen events - operational / process improvements. * Project Management - Review and become familiar with selected projects - Work on the development of project scopes, solicit and attain quotes, and manage small projects as assigned. * Administrative Tasks - Review and update work instructions and procedures What You Will Bring * Pursuing Bachelor's Degree/Technical Degree in Engineering, preferably with a focus in Foundry / Metal Casting or Manufacturing * Basic CAD experience / knowledge, 2D and/or 3D CAD * Familiar with MS Suite products, particularly Excel * Able to read and produce technical plans, drawings, and schematics * Good communicator, verbal and written * Good leadership skills * Good time management and analytic skills * Preference - Basic programming skills (CNC, Robotics, etc.) Compensation * Health benefits * On-site nurse * 401k and Paid Holidays after 90 days * Career advancement opportunities, on-site training, steel toe reimbursement

The Department of Environmental Protection, Bureau of Waterways Engineering and Wetlands, Project Inspection Division is seeking candidates who are dedicated to protecting the health and safety of Pennsylvania's citizens and environment. If you are interested in furthering your Commonwealth career as a Civil Engineer Trainee, apply today to become a part of our team! DESCRIPTION OF WORK This position performs various engineering duties in the design, construction, inspection and maintenance of flood control projects by serving as a project engineer and in ensuring contractors and DEP inspectors complete work in accordance with established agreements in the maintenance and construction areas. The position supervises wage and salaried Environmental Projects Construction Inspectors depending on the size of the construction project. Work is assigned by a Construction Inspector Manager who reviews inspection activities, and engineering activities are supervised by Civil Engineer Manager, who acts as the responsible charge. If this position is filled as a Civil Engineer Trainee, the incumbent will participate in a one-year formal and on-the-job training program to learn the duties of a Civil Engineer Supervisor. The incumbent will perform these duties either with the Construction Inspector Manager or Civil Engineer Manager. The work products produced, i.e. plans, reports, letters, etc. are reviewed by the supervisor before being issued or released. Interested in learning more? Additional details regarding this position can be found in the position description. Work Schedule and Additional Information: Full-time employment. Work hours are 7:00 am to 3:30 pm, Monday - Friday, with a 1-hour lunch. Travel usually requires overnight stays of 3 to 4 nights a week depending on scheduled activities. This position is Home Headquartered but does not include a monthly stipend. Telework: This position is home headquartered. In order to be home headquartered, you must have a securely configured high-speed internet connection and work from an approved location inside Pennsylvania. Salary: Most selected candidates who are new to employment with the Commonwealth of Pennsylvania will begin employment at the starting annual salary of $66,328 (before taxes). You will receive further communication regarding this position via email. Check your email, including spam/junk folders, for these notices. REQUIRED EXPERIENCE, TRAINING & ELIGIBILITY QUALIFICATIONS Minimum Experience and Training Requirements: One year of civil engineering experience and a valid Engineer-in-Training certificate issued by or acceptable to the Pennsylvania State Registration Board for Professional Engineers, Land Surveyors and Geologists; or A bachelor's degree in civil engineering or a closely related field that includes or is supplemented by major coursework in civil engineering. Applicants will be considered to have met the educational requirements once they are within three months of graduating with a qualifying degree. Conditions of Employment: This position also requires possession of a valid driver's license which is not under suspension. Other Requirements: PA residency requirement is currently waived for this title. You must be able to perform essential job functions. How to Apply: Resumes, cover letters, and similar documents will not be reviewed, and the information contained therein will not be considered for the purposes of determining your eligibility for the position. Information to support your eligibility for the position must be provided on the application (i.e., relevant, detailed experience/education). If you are claiming education in your answers to the supplemental application questions, you must attach a copy of your college transcripts for your claim to be accepted toward meeting the minimum requirements. Unofficial transcripts are acceptable. Your application must be submitted by the posting closing date . Late applications and other required materials will not be accepted. Failure to comply with the above application requirements may eliminate you from consideration for this position. Veterans: Pennsylvania law (51 Pa. C.S. *7103) provides employment preference for qualified veterans for appointment to many state and local government jobs. To learn more about employment preferences for veterans, go to************************************************ and click on Veterans. Telecommunications Relay Service (TRS): 711 (hearing and speech disabilities or other individuals). If you are contacted for an interview and need accommodations due to a disability, please discuss your request for accommodations with the interviewer in advance of your interview date. The Commonwealth is an equal employment opportunity employer and is committed to a diverse workforce. The Commonwealth values inclusion as we seek to recruit, develop, and retain the most qualified people to serve the citizens of Pennsylvania. The Commonwealth does not discriminate on the basis of race, color, religious creed, ancestry, union membership, age, gender, sexual orientation, gender identity or expression, national origin, AIDS or HIV status, disability, or any other categories protected by applicable federal or state law. All diverse candidates are encouraged to apply. EXAMINATION INFORMATION Completing the application, including all supplemental questions, serves as your exam for this position. No additional exam is required at a test center (also referred to as a written exam). Your score is based on the detailed information you provide on your application and in response to the supplemental questions. Your score is valid for this specific posting only. You must provide complete and accurate information or: your score may be lower than deserved. you may be disqualified. You may only apply/test once for this posting. Your results will be provided via email.

Join our innovative thermal solutions team- named a Best Place to Work in PA! Advanced Cooling Technologies, Inc. (ACT) is a premier thermal solutions provider serving many diverse markets. Our products and technologies have become integral parts of numerous mission-critical devices, including life-saving MRI and CT scanners, US Military applications, weather and telecommunication satellites, exploratory space missions, and much more. We are proud to be doing work that really makes a difference in our world- and beyond! Position summary: The Product Development Engineer supports various phases of projects ranging from concept generation and initial design all of the way to final delivery hardware and volume production. The types of projects vary from exploratory trade studies to highly detailed thermal analysis, to the fabrication of complicated prototype assemblies and testing. At any given time, the Product Development Engineer is responsible for the success of multiple projects, providing the opportunity to work on all aspects of the product development cycle. Candidates that have a strong technical background with hands-on experience fabricating prototype hardware excel at this position. Responsibilities Include: * All aspects of initial product design including: * Innovative concept generation * Excel or hand calculation analytical analysis * 3-D CAD modeling (Solidworks) * CFD/FEA analysis * 2-D Drawing creation * Fabrication procedure and work instruction development * Working cohesively with a diverse group of engineers and technicians * Managing program schedules and budget * Frequent customer communication/interaction Requirements Our work environment demands a candidate with the ability to take on multiple responsibilities in a fast-paced environment. We are looking for team players who enjoy working with customers, vendors, and co-workers to provide the best service and solutions. The best candidates will be those who embrace new challenges, using critical thinking skills, and developing innovative solutions. * B.S. or M.S. degree in Mechanical Engineering or Aerospace Engineering. * Proficiency in using commercial CAD (Solidworks), FEA (Solidworks) and CFD software (Autodesk Simulation, Fluent, Comsol) * Hands-on experience with design for manufacturability (DFM) and prototype hardware fabrication and testing is a plus! * Good verbal and written skills. * Must be a US Person as defined by 22 C.F.R. §120.15? (U.S. Citizen, lawful permanent resident, refugee, or asylee) due to ITAR restrictions. We offer an attractive and competitive compensation/benefits package, which includes a profit-sharing bonus plan. Our work environment is comfortable, collaborative, and stimulating. Apply now to get started on a career with ACT! If you are looking for an opportunity to start a career with a growing company doing exciting and important work, please apply today! ACT is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, status as a qualified individual with a disability, or any other trait protected by law. E-verify employer.

The importance of water to the health of our world can't be overstated. As the frequency and intensity of floods, droughts and storms increases, the water industry must continue to build resiliency and lead from the front. Together with our clients, we are thinking and doing things differently to help pre-empt and prepare for what's next. Be a part of this dynamic and committed team of diverse water specialists and drive change for your community. You'll be able to apply our powerful global network of skills and decades of experience to create positive water outcomes that respect nature and nurture communities. Who are we looking for? Our Northeast Water business is expanding, and we're excited to welcome several talented Project Engineers to our offices in Harrisburg, Bloomsburg, and King of Prussia, PA. This is your opportunity to make a meaningful impact on water, wastewater, utility, and infrastructure design projects that shape communities across the region. As a Project Engineer, you'll play a key role in delivering innovative solutions alongside a dynamic, multi-disciplinary team. In this role, you will assist with preparing technical reports, design drawings, contract documents, cost estimates, and permits. You'll lead and support client workshops focused on advancing technical studies and designs, while also developing project delivery strategies and job management plans to ensure compliance with QA standards. Your work will involve supporting pricing, estimating, scoping, and marketing strategies for new projects, as well as coordinating CAD teams to produce high-quality design and construction documents. You'll conduct field investigations and condition assessments to identify process improvements, manage communication on technical and contractual issues, and facilitate client meetings to keep projects on track. This is more than just a job-it's a chance to grow your career while contributing to sustainable water solutions that matter. If you're passionate about engineering excellence and ready to take on challenging, rewarding projects, we'd love to hear from you! Our Hybrid Work Model: Be part of the dynamic culture! Our workplace thrives on a hybrid model, combining in-office collaboration and flexibility. Join us in the office three days a week to contribute, connect and excel in our vibrant environment. Working with an energetic and high performing team, this position offers a variety of work and will see you involved in: * Engineering Drawings: Create engineering drawings to support the communication, evaluation, and implementation of engineering solutions. * Engineering Solutions Design: Contribute to the design of engineering solutions; design the feasibility testing approach and supervise its implementation to support the development and validation of engineering solutions. * Health, Safety, and Environment: Follow the organization's health, safety, and environment (HSE) policies, procedures, and mandatory instructions to identify and mitigate environmental risks and risks to the well-being of self and others in the workplace. Identify patterns of risky behavior within the team and take appropriate action to resolve them, escalating serious issues as appropriate. * Personal Capability Building: Develop own capabilities by participating in assessment and development planning activities as well as formal and informal training and coaching; gain or maintain external professional accreditation, where relevant, to improve performance and fulfill personal potential. Maintain an understanding of relevant technology, external regulation, and industry best practices through ongoing education, attending conferences, and reading specialist media. * Research: Carry out a range of research activities either to support others or to fulfill the requirements of the role. * Technical Troubleshooting: Support technical troubleshooting efforts, aiding in the quick and accurate identification, analysis, and resolution of technical issues with equipment and experiments. * Project Management: Work within an established project management plan to achieve specific goals. * Client & Customer Management (External): Help senior colleagues manage client and customer relationships by using relevant sales or client systems. What you will bring to the team: * Bachelor's and/or Master's degree in Civil or Environmental Engineering * Registered Pennsylvania Professional Engineer or ability to obtain it * At least 3-7 years of municipal water experience including experience in the state of Pennsylvania; prior water and wastewater design experience with local municipalities a plus * Stormwater design and MS4 planning a plus #LI-JK1 As a multicultural organization, we encourage individual achievement and recognize the strength of a diverse workforce. GHD is an equal opportunity employer. We provide equal employment opportunities to all qualified employees and applicants without regard to race, color, religion, genetic information, national origin, sex (including same sex), sexual orientation, gender identity, pregnancy, childbirth, or related medical conditions, age, disability or handicap, citizenship status, service member status, or any other category protected by federal, state, or local law.