Electrical Engineer jobs at Protingent

Now Hiring: Senior I&C Designer + I&C Designer (2 Roles) | Hybrid or Fully Remote We're supporting a long-standing engineering group that is preparing for a significant wave of new project work arriving in early 2025. As they scale, we're helping them bring on two Instrumentation & Controls Designers-one Senior-level and one Mid-level-to join a collaborative, well-established team. These roles offer the chance to work on meaningful industrial and power-focused design projects with highly experienced I&C engineers and designers. If you're looking for stability, hands-on design ownership, and a team that values accuracy, quality, and mentorship, this is a strong fit. Location & Work Model Ideally Bothell, WA, but fully remote candidates across the U.S. are welcome to apply Hybrid available for those near an office Little to no travel Pay Range Senior I&C Designer: $36-60/hr I&C Designer (Mid-level): $30-50/hr Senior Instrumentation & Controls Designer What You'll Do You'll take a lead role in delivering complete I&C design packages-guiding design efforts, coordinating with multiple engineering disciplines, and ensuring the accuracy and quality of project deliverables. You will: Develop full I&C drawing sets: wiring diagrams, loop sheets, installation details, network architecture, junction boxes, etc. Lead and schedule design work for yourself and a small design team Check work for compliance with specifications, standards, and the SOW Perform and oversee drafting in AutoCAD (2D/3D) or Revit Place instrumentation in 3D models using SmartPlant 3D, AutoCAD Plant 3D, or Revit Support limited engineering functions under I&C engineering personnel Mentor junior designers and maintain project documentation Provide occasional support to Construction and Start-Up teams Track drawing registers and maintain ISO 9001-compliant revision histories What You Bring AA in Drafting, AS in Instrumentation/Industrial Automation, or similar technical education 6+ years of industrial or power plant I&C design experience Deep understanding of instrumentation types, installation practices, and drafting standards Strong AutoCAD 2D/3D skills and experience with the SmartPlant Suite (SPI, SPPID, SP3D) Ability to read and incorporate P&IDs into I&C design Solid understanding of electronics, PLCs, DCS, transmitters, and electrical fundamentals Strong communication skills and the ability to work with minimal supervision Experience leading design work and mentoring others Instrumentation & Controls Designer (Mid-Level) What You'll Do You'll support the preparation of I&C design packages and work alongside senior team members to deliver accurate, high-quality drawings and models. Responsibilities include: Creating I&C drawings from notes, sketches, vendor materials, SOW/DBD guidance Drafting in AutoCAD (2D/3D) or Revit Placing instrumentation in 3D models using SmartPlant 3D, AutoCAD Plant 3D, or Revit Cataloging instrumentation and producing reports Producing installation details and material take-offs Reviewing vendor and discipline drawings Supporting Construction and Start-Up teams as needed Maintaining ISO 9001-compliant document revisions Collaborating with designers and engineers to ensure interface accuracy What You Bring AA in Drafting, AS in Instrumentation/Industrial Automation, or equivalent 2+ years of I&C design experience (industrial or power preferred) Strong AutoCAD skills and familiarity with SmartPlant tools Understanding of instrumentation types, drafting standards, and P&ID interpretation Strong math foundation (algebra and trigonometry) Basic understanding of PLCs, DCS, and electrical fundamentals Motivated, detail-oriented, and able to work independently with moderate supervision Why These Roles Stand Out Stable, well-supported engineering group with consistent project wins Opportunities for mentorship (both giving and receiving) Flexible work model-including fully remote for the right candidates A chance to influence and deliver full-cycle I&C design packages Team culture built on collaboration, accuracy, and professional growth Interested? If you'd like to explore either opportunity, feel free to reach out directly or send along a resume. We're happy to walk through the details, team structure, and answer any questions.

We put the unity in "opportunity." Opportunity Snapshot: Compensation: $75.00/hour Assignment Duration: 12 months+ Work Schedule: 14/14 rotation (must be willing to work day and night shifts) Benefits: Comprehensive insurance with 401(k), PTO and holidays Multiple Openings Available Qualifications: Electrical HV Power Transmission and Distribution experience Electrical Dispatch Operations experience Ignition or other SCADA platform (Wonderware, GE HMI, etc.) knowledge/experience SeeQ Analytics Software functional knowledge Aspentech - Monarch and ABB Xenon SCADA software functional knowledge Instrumentation Controls & Electrical experience Understanding of equipment, systems, and processes relevant to the specific industry (O&G upstream/downstream remote operation) Proficiency in using control systems, monitoring tools, and computer software related to control room operations (SCADA, Call Systems, Seek, Citrix) Strong analytical and problem-solving skills, with the ability to make quick decisions in high-pressure situations Excellent computer skills (Excel, PowerBI, Zoom, RDC) Attention to detail and a strong sense of responsibility and accountability Ability to work in shifts and adapt to 24/7 on-call working days and nights rotation schedule High School diploma or GED required Responsibilities: Support field electrical maintenance work and electrical isolation (Lock out Tag out: Lock Out Tag Out (LOTO)) for lighting, air condition and motor maintenance. Typically reports to a supervisor or manager. TASKS AND RESPONSIBILITIES Provides guidance to lower level staff with complex problems. Assembles, tests, and modifies experimental and/or operational electrical machinery, electrical control equipment, electrical circuitry and components according to engineering specifications in industrial or commercial plants and laboratories. Diagnoses causes of malfunctions or failures and performs preventive/corrective maintenance. Records data and recommends modification or replacement of failed equipment. The Bergaila Way: The Bergaila Companies is a nationally recognized leader in providing staffing services to all sectors of the energy industry. We continually focus on partnering with talented professionals, engineering the perfect fit between our clients and employees. Choosing a career path with Bergaila grants you immediate access to nationally recognized organizations we partner with. Bergaila consistently attracts and retains its Employees with our dedicated internal service team, top tier benefits programs for contractors and their families, and commitment to place you in the desired career of your choice. Client Overview: Our Client is an American energy company operating principally in the U.S. and Canada, that specializes in the drilling and production of unconventional oil and natural gas assets. Our client has a reputation for efficient resource development, environmental stewardship and community involvement, with a drive to meet the growing challenges of the domestic natural gas industry.

We are looking for a junior-mid level Electrical Engineer with strong PCBA experience and exposure to supplier quality. This role blends hands-on electrical engineering with quality support across PCBA builds, incoming inspection, and supplier issue resolution. This position is ideal for someone who enjoys hardware, understands how boards are built and tested, and wants to gain experience across both product development and supplier quality-without requiring senior-level design ownership. Location: East Bay Area Compensation (Full Time): $130,000-$145,000 (DOE) Key Responsibilities: Electrical Engineering (50-60%) Support electrical testing, bring-up, and PCBA debugging Review schematics, layouts, and assembly drawings; create supporting test documentation Execute board-level validation and record clean, accurate test data Assist with component evaluations and engineering change updates Perform electrical troubleshooting during prototype and development builds Collaborate with systems, mechanical, and manufacturing engineering teams Supplier Quality Engineering (40-50%) Provide technical feedback to suppliers on PCBA build quality and assembly issues Support incoming inspection and identify workmanship or electrical concerns Assist with NCRs, issue tracking, and quality documentation Participate in DFM reviews and provide actionable feedback Drive corrective actions and verify effectiveness through electrical testing Review supplier test reports, workmanship standards, and compliance to specs Maintain quality records and support quality-system requirements Required Qualifications Bachelor's degree in Electrical Engineering, Electronics, or related field 2-4 years of experience with PCBAs, electrical assemblies, or electronics manufacturing Ability to interpret schematics, layouts, and BOMs Hands-on experience with common test equipment (multimeter, oscilloscope, power supplies) Familiarity with PCBA manufacturing processes and component-level troubleshooting Preferred Qualifications Exposure to supplier quality processes, DFM feedback, NCRs, or corrective actions Knowledge of standards such as IPC-A-610 or ISO 9001 Experience working with contract manufacturers or external suppliers Background in FA, RCA, or reliability activities (not required but beneficial) Ideal Candidate Profile Comfortable balancing both engineering and quality responsibilities Hands-on, detail-oriented, and confident communicating with suppliers Enjoys PCBA-level technical work and identifying issues early in the build cycle Strong problem solver who thrives in fast-paced development environments Interested in growing into electrical, manufacturing, or quality engineering career paths #IND-SPG Estimated Min Rate: $130000.00 Estimated Max Rate: $145000.00 What's In It for You? We welcome you to be a part of the largest and legendary global staffing companies to meet your career aspirations. Yoh's network of client companies has been employing professionals like you for over 65 years in the U.S., UK and Canada. Join Yoh's extensive talent community that will provide you with access to Yoh's vast network of opportunities and gain access to this exclusive opportunity available to you. Benefit eligibility is in accordance with applicable laws and client requirements. Benefits include: Medical, Prescription, Dental & Vision Benefits (for employees working 20+ hours per week) Health Savings Account (HSA) (for employees working 20+ hours per week) Life & Disability Insurance (for employees working 20+ hours per week) MetLife Voluntary Benefits Employee Assistance Program (EAP) 401K Retirement Savings Plan Direct Deposit & weekly epayroll Referral Bonus Programs Certification and training opportunities Note: Any pay ranges displayed are estimations. Actual pay is determined by an applicant's experience, technical expertise, and other qualifications as listed in the job description. All qualified applicants are welcome to apply. Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Visit ************************************************ to contact us if you are an individual with a disability and require accommodation in the application process. For California applicants, qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. All of the material job duties described in this posting are job duties for which a criminal history may have a direct, adverse, and negative relationship potentially resulting in the withdrawal of a conditional offer of employment. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. By applying and submitting your resume, you authorize Yoh to review and reformat your resume to meet Yoh's hiring clients' preferences. To learn more about Yoh's privacy practices, please see our Candidate Privacy Notice: **********************************

We put the unity in "opportunity." Opportunity Snapshot: Compensation: $75.00/hour Assignment Duration: 12 months+ Work Schedule: 14/14 rotation (must be willing to work day and night shifts) Benefits: Comprehensive insurance with 401(k), PTO and holidays Multiple Openings Available Qualifications: Electrical HV Power Transmission and Distribution experience Electrical Dispatch Operations experience Ignition or other SCADA platform (Wonderware, GE HMI, etc.) knowledge/experience SeeQ Analytics Software functional knowledge Aspentech - Monarch and ABB Xenon SCADA software functional knowledge Instrumentation Controls & Electrical experience Understanding of equipment, systems, and processes relevant to the specific industry (O&G upstream/downstream remote operation) Proficiency in using control systems, monitoring tools, and computer software related to control room operations (SCADA, Call Systems, Seek, Citrix) Strong analytical and problem-solving skills, with the ability to make quick decisions in high-pressure situations Excellent computer skills (Excel, PowerBI, Zoom, RDC) Attention to detail and a strong sense of responsibility and accountability Ability to work in shifts and adapt to 24/7 on-call working days and nights rotation schedule High School diploma or GED required Responsibilities: Support field electrical maintenance work and electrical isolation (Lock out Tag out: Lock Out Tag Out (LOTO)) for lighting, air condition and motor maintenance. Typically reports to a supervisor or manager. TASKS AND RESPONSIBILITIES Provides guidance to lower level staff with complex problems. Assembles, tests, and modifies experimental and/or operational electrical machinery, electrical control equipment, electrical circuitry and components according to engineering specifications in industrial or commercial plants and laboratories. Diagnoses causes of malfunctions or failures and performs preventive/corrective maintenance. Records data and recommends modification or replacement of failed equipment. The Bergaila Way: The Bergaila Companies is a nationally recognized leader in providing staffing services to all sectors of the energy industry. We continually focus on partnering with talented professionals, engineering the perfect fit between our clients and employees. Choosing a career path with Bergaila grants you immediate access to nationally recognized organizations we partner with. Bergaila consistently attracts and retains its Employees with our dedicated internal service team, top tier benefits programs for contractors and their families, and commitment to place you in the desired career of your choice. Client Overview: Our Client is an American energy company operating principally in the U.S. and Canada, that specializes in the drilling and production of unconventional oil and natural gas assets. Our client has a reputation for efficient resource development, environmental stewardship and community involvement, with a drive to meet the growing challenges of the domestic natural gas industry.

Electrical Engineer - MEP Nelson + Pope is seeking a qualified Electrical Engineer to work in the Mechanical Electrical Plumbing Department in our Melville, New York office for an immediate start. The work includes electrical design to support for new building construction and renovation projects, as well as lighting, utility and distributed energy projects. Responsibilities/Top Skills/Qualifications: support partners, project managers and senior technical staff preparation of permit, construction and bid documents proficient in AutoCad knowledge of Revit preferred site visits for field investigations and measurements shop drawing review detail oriented and commitment to producing high-quality work ability to work independently or in collaboration with a team proficient in Microsoft Office good communication, organizational & time management skills Nelson + Pope offers a competitive salary commensurate with level of education and professional experience and offers strong health, paid time off, work life balance, 401K, and other benefits. Extensive learning and educational work environment with strong day to day mentorship as well as formal training opportunities. Candidates must have a valid driver's license and be willing and able to commute to our Melville office for this on-site position (non-remote). Non-local candidates are encouraged to apply, and relocation assistance may be available where appropriate. The interview process is succinct. Nelson + Pope is proud to be an Equal Opportunity and Affirmative Action Employer. We evaluate qualified applicants without regard to race, color, national origin, religion, sex, sexual orientation, gender identity, disability, protected veteran status, and other statuses protected by law. In compliance with the Immigration Reform and Control Act of 1986, we will hire only U.S. citizens and aliens lawfully authorized to work in the United States (if the position is or will be one which is subject to U.S. law). Verification of employment eligibility will be required at the time of hire. Salary Range: $80K to $115K

A respected engineering consulting firm is seeking an Electrical Engineer to contribute to high-performance building projects in Oregon. You will play a key role in designing electrical system design, collaborating with multidisciplinary teams, and delivering innovative solutions. Are you looking to join a firm that elevates the built environment? If so, please reach out to learn more. The Electrical Engineer will be responsible for... Designing electrical systems for healthcare and education facilities. Coordinating with architects and other engineering disciplines for integrated design. The Electrical Engineer should have the following qualifications... 4+ years of experience, preferably in healthcare or education sectors. Proficiency in AutoCAD and Revit, familiarity with energy modeling tools is a plus. Strong understanding of electrical system design principles. Benefits / Perks Flexible hybrid schedule Diverse impactful across Oregon Professional growth and mentorship opportunities.

Job title: Electrical Engineer Annual Salary: $100,000 - $140,000 per annum & Job Title: An exciting high technology Electronics Engineering and Manufacturing Company located in Dallas (Texas) is now hiring for a brand new Electrical Engineer with an Electronics Hardware Design background to join the team and business who have a strong team culture and vibrant working environment. Salary on offer: The annual salary on offer for the successful Electrical Engineer is $100,000 - $140,000 per annum, depending on skillset and experience. Summary of the Electrical Engineer Role: The successful Electrical Engineer will be responsible for the system electronics, leading system architecture definition and validation, and working closely within a multi-disciplined team to ensure timely product delivery. Electrical Engineer Key Skills: 5+ industry professional experience Experience in the full product design lifecycle from concept to production Electronics Circuit Design (analogue, digital & power circuit design) PCB Design & Schematic Capture Experience of Altium Designer, OrCAD, Cadence Allegro Experience of microcontrollers & microprocessors Network interfaces - SPI, I2C, USB, UART, RS232/485 Embedded C, C++, Python, VHDL, GUI - Strong plus Knowledge & experience of CPLD & FPGA - Strong plus PLC programming, integration, and troubleshooting (Allen-Bradley, Siemens, or similar platforms) Product safety & compliance - EMC, EMI, LVD, CE Marking, FCC, UL Strong lab experience for bring-up and verification of new hardware Good teamwork, communication skills and being a self-starter Benefits Package: 401K retirement plan Unlimited PTO Medical & Dental Healthcare Vision Insurance EAP If you are interested in the above exciting Electrical Engineering position and think you have the skills required to join the successful company and to be working on new exciting technologies, please don't hesitate to apply and contact Frank Kanjanda on ******************** or call *************** for more information.

Hour: Monday - Friday 7:30am - 4:30pm Pay: $58,100 - $77,400 Direct Hire **Must be US Citizen or Permanent Resident ***Must be able to pass a background check/drug screen, cannot test positive for marijuana An industry leading manufacturer of gas and liquid analyzers is seeking an Electrical Engineer to join their team. This individual will be responsible for designing, developing, modifying, and evaluating electronic parts, components, or integrated circuitry for electronic equipment, and/or other hardware systems. Determines design approaches and parameters. Selects components and equipment based on analysis of specifications and reliability. May also review vendor capability to support product development. May use computer-assisted engineering and design software and equipment to perform assignments. Applies principles and techniques of electrical engineering to accomplish goals. Works under general supervision. Exercises judgment within defined procedures and practices to determine appropriate action; a certain degree of creativity and latitude is required. Job Duties: · Provides analysis related to the design, development, and implementation of electronic parts, components, or integrated circuitry for hardware systems. · Develops test strategies, devices, and systems. · Plan and implement research methodology and procedures to apply principles of electrical theory to engineering projects. · Analyzes equipment to establish operating data, conducts experimental tests and evaluates results. · Performs stress and performance tests on a variety of computer hardware including circuit boards, processors, and wiring. · Operate computer-assisted engineering and design software and equipment to perform engineering tasks. · Designs and modifies PCB/PCA's using ECAD software. · Prepares and studies technical drawings, specifications of electrical systems, to ensure conformity to standards and customer requirements. · Generates architecture for functional components and assists with product architecture. · Delivers hardware designs through prototype, beta, and production release in compliance with product development process and quality practices. · Supports existing products by troubleshooting and failure analysis. · Participates in technical design reviews of existing designs and peer reviews. · Compile data and write reports regarding existing and potential engineering studies and projects. · Briefs others on deliverables, status, and progress. · Documents and demonstrates solutions by developing documentation, flowcharts, layouts, diagrams, and charts. · Provides information by collecting, analyzing, and summarizing development and service issues. · Intermediate level experience with design of analog and digital circuits · Ability to test designs to specification. · Circuit analysis skills using applied calculus and algebra, including component stress analysis. · Strong analytical, problem solving, communication and project management skills are required. · Daily availability to include evenings and weekends when necessary to reach goals and deadlines. Qualifications: · Bachelor's degree in a related field · 2 - 5 years directly related experience and/or training · Must have experience with Altium Software · Experience with Functional Safety (SIL) and ATEX Intrinsic Safety (Ex'ia') is a plus · Individuals that have strong communication skills, problem solvers, and project management skills are helpful All qualified applicants will receive consideration for employment without regard to race, color, national origin, age, ancestry, religion, sex, sexual orientation, gender identity, gender expression, marital status, disability, medical condition, genetic information, pregnancy, or military or veteran status. We consider all qualified applicants, including those with criminal histories, in a manner consistent with state and local laws, including the California Fair Chance Act, City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, and Los Angeles County Fair Chance Ordinance. For unincorporated Los Angeles county, to the extent our customers require a background check for certain positions, the Company faces a significant risk to its business operations and business reputation unless a review of criminal history is conducted for those specific job positions.

Eastman Kodak Company is looking for a Control System Engineer to join our team in Rochester, NY. We are seeking an individual with the background to be successful supporting our batch Emulsion and Film Sensitizing Machine Manufacturing Operations located within Eastman Business Park in Rochester, NY. Primary Responsibilities • Provide technical support for the operation, maintenance and continuous improvement of manufacturing instrumentation and process control systems. • Work closely with operations, process engineers, and maintenance to understand the business and user needs and priorities. • Provide full life cycle support of control systems in our film sensitizing area, including developing requirements, programming support, commissioning, and ongoing hardware and software maintenance, from the control room to the field instrumentation. • Support upgrade projects for existing Rockwell Automation PLC based control systems, Emerson Ovation DCS and Reliance Automax Machine Coordinated Drive Control Systems including identifying system hardware and software architecture improvement opportunities. • Provide hardware and integration support for Ethernet based control systems in the plant IT environment. • Work with maintenance to develop data driven reliability improvement opportunities, as well as troubleshoot system hardware, resolve software malfunctions and assist in system improvements and software upgrades. • Implement improvements in systems capabilities that will increase the ability to meet customer requirements, including safe and reliable operations, and improve business competitiveness, using Six Sigma methodology as applicable. Qualifications • Bachelor's degree in electrical engineering or Electro-Mechanical Technology (Mechatronics) • Knowledge and understanding of Rockwell Automation PLC's and Process Control DCS • Communication skills: ability to interact with operator/mechanics/process engineers/staff/management • Knowledge of Rockwell VFD's, their application and configuration • Ability to complete work independently and through influence • Ability to lead and participate on teams, including outside contractors • Ability to configuring, documenting and troubleshooting control systems

Yoh is looking for a Electrical Test Engineer to come in and join our Biotech/ Pharma client for their state of the art manufacturing building. The ideal individual will come in with Bachelor's degree in Engineering: Mechanical, Electrical or Manufacturing with 7+ years of experience, or MS/ PhD with 5-7 years of experience. Industry: Bio Tech/ manufacturing Location: Pleasanton CA Compensation: $60-68/hour DOE Type: 6 month Contract Responsibilities Interfaces with design engineering and Product Management to coordinate the release of new products. Work with design engineering to provide DFM/A feedback during the design phase. Design and develop manufacturing test fixtures as required. Proactively communicate technical information and status to broad, cross-functional teams Develop and refine acceptance test processes and specifications of complex electromechanical subsystems while working cross functionally with manufacturing, R&D, and contract manufacturers. Required Skills (NPI Test Engineer) Bachelor's degree in Engineering: Mechanical, Electrical or Manufacturing with 7+ years of experience, or MS/ PhD with 5-7 years of experience. Work history with several successful iterations of Design to Manufacturing transfers. Creation of FMEAs, ECOs and work instructions Working knowledge of motor (eg., servo, stepper), PCA, and subassembly testing Experience with designing and testing PCB Experience working with instrument manufacturing under ISO 9001 or ISO 13485 standards Experience with Altium, Python, and SDK development Experience with Snowflake, Labview, and MES systems a plus Estimated Min Rate: $60.00 Estimated Max Rate: $68.00 What's In It for You? We welcome you to be a part of the largest and legendary global staffing companies to meet your career aspirations. Yoh's network of client companies has been employing professionals like you for over 65 years in the U.S., UK and Canada. Join Yoh's extensive talent community that will provide you with access to Yoh's vast network of opportunities and gain access to this exclusive opportunity available to you. Benefit eligibility is in accordance with applicable laws and client requirements. Benefits include: Medical, Prescription, Dental & Vision Benefits (for employees working 20+ hours per week) Health Savings Account (HSA) (for employees working 20+ hours per week) Life & Disability Insurance (for employees working 20+ hours per week) MetLife Voluntary Benefits Employee Assistance Program (EAP) 401K Retirement Savings Plan Direct Deposit & weekly epayroll Referral Bonus Programs Certification and training opportunities Note: Any pay ranges displayed are estimations. Actual pay is determined by an applicant's experience, technical expertise, and other qualifications as listed in the job description. All qualified applicants are welcome to apply. Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Visit ************************************************ to contact us if you are an individual with a disability and require accommodation in the application process. For California applicants, qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. All of the material job duties described in this posting are job duties for which a criminal history may have a direct, adverse, and negative relationship potentially resulting in the withdrawal of a conditional offer of employment. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. By applying and submitting your resume, you authorize Yoh to review and reformat your resume to meet Yoh's hiring clients' preferences. To learn more about Yoh's privacy practices, please see our Candidate Privacy Notice: **********************************

Yoh is seeking an experienced Analog/Mixed-Signal IC Layout Engineer to support the design and implementation of high-performance circuits in leading-edge CMOS processes. See below for abbreviated job responsibilities and requirements. If, after reviewing, you are interested in learning more about this-or other opportunities-please apply with your updated résumé ASAP. Location: San Jose, CA (Onsite 5 Days/Week) Type: Full Time Compensation: $120,000 - $192,000 Industry: Semiconductor / Infrastructure Software Citizenship Requirement: No citizenship requirements. Need to confirm. Key Responsibilities Lead and execute physical layout for complex analog and mixed-signal integrated circuits in advanced technology nodes (including deep-submicron and FinFET). Collaborate with circuit designers to develop layouts for high-speed and precision blocks such as TIAs, drivers, data converters, and clocking circuits. Perform floorplanning, device-level and block-level routing, and top-level integration for large-scale chip assemblies. Apply best-practice layout techniques for reliability, thermal awareness, electromigration mitigation, and manufacturability. Utilize industry-standard EDA platforms for layout creation, verification, and physical sign-off. Work closely with distributed engineering teams across multiple locations. Qualifications Bachelor's degree in Electrical or Computer Engineering with 8+ years of relevant IC layout experience, or Master's degree with 6+ years experience. Demonstrated expertise designing high-speed analog/mixed-signal IC layouts in advanced technology nodes (e.g., 5nm, 3nm, or comparable). Strong knowledge of physical design concepts, semiconductor device behavior, and fabrication processes. Proficiency with commonly used layout and verification tools (Cadence, Synopsys, Mentor, etc.). Ability to plan schedules, manage assignments independently, and communicate effectively across technical levels. Experience with automation/scripting for layout productivity is a plus. Willingness to travel occasionally as needed. May provide guidance or oversight to team members. Estimated Min Rate: $134400.00 Estimated Max Rate: $192000.00 What's In It for You? We welcome you to be a part of the largest and legendary global staffing companies to meet your career aspirations. Yoh's network of client companies has been employing professionals like you for over 65 years in the U.S., UK and Canada. Join Yoh's extensive talent community that will provide you with access to Yoh's vast network of opportunities and gain access to this exclusive opportunity available to you. Benefit eligibility is in accordance with applicable laws and client requirements. Benefits include: Medical, Prescription, Dental & Vision Benefits (for employees working 20+ hours per week) Health Savings Account (HSA) (for employees working 20+ hours per week) Life & Disability Insurance (for employees working 20+ hours per week) MetLife Voluntary Benefits Employee Assistance Program (EAP) 401K Retirement Savings Plan Direct Deposit & weekly epayroll Referral Bonus Programs Certification and training opportunities Note: Any pay ranges displayed are estimations. Actual pay is determined by an applicant's experience, technical expertise, and other qualifications as listed in the job description. All qualified applicants are welcome to apply. Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Visit ************************************************ to contact us if you are an individual with a disability and require accommodation in the application process. For California applicants, qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. All of the material job duties described in this posting are job duties for which a criminal history may have a direct, adverse, and negative relationship potentially resulting in the withdrawal of a conditional offer of employment. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. By applying and submitting your resume, you authorize Yoh to review and reformat your resume to meet Yoh's hiring clients' preferences. To learn more about Yoh's privacy practices, please see our Candidate Privacy Notice: **********************************

Our client is seeking a Controls Engineer to join their team! This position is located in Plano, Texas. Collaborate with design engineers to spec sensors, motors, and other electrical components Responsible for completing the electrical BOM and controls wiring diagram Develop and then Debug ladder logic programming for sequence and control in the Automation Direct PLC Desired Skills/Experience: 5+ years PLC programming experience Ability to develop and implement a ladder logic program from scratch Experience integrating and programming stepper motors, gantry or motion systems, and sensors Experience programing then debugging/ testing of motion, recovery, and fault sequences for a 3 axis stepper based motion system Automation Direct PLC familiarity (ProductivitySuite software ladder logic) is preferred Experience with PLC programming using methods such as recipe management, data management or remote data logging, or MQTT protocol is a plus Benefits: Medical, Dental, & Vision Insurance Plans Employee-Owned Profit Sharing (ESOP) 401K offered The approximate pay range for this position starting at $180,000 - 190,000. Please note that the pay range provided is a good faith estimate. Final compensation may vary based on factors including but not limited to background, knowledge, skills, and location. We comply with local wage minimums.

Hardware Engineer - Wilsonville, OR (Onsite | Full-Time) This position involves creating and supporting advanced electronic designs used in complex technology products. You'll participate in architecture planning, schematic development, board-level design, and hands-on validation work, collaborating closely with other engineering groups throughout the project lifecycle. Key Responsibilities: Develop digital circuits, processor-based boards, real-time systems, and related hardware components Lead high-speed design projects from initial concept through production release Evaluate and select components in partnership with vendors and internal teams Produce and review schematics, block diagrams, and design documentation Guide PCB layout activities and ensure alignment with project requirements Perform board bring-up, functional testing, and troubleshooting to resolve hardware issues Work with software/firmware teams during system integration and performance tuning Participate in technical reviews and provide input on requirements and feasibility Qualifications: 5+ years of experience in hardware development or related engineering disciplines Background working with high-speed designs or communication-oriented hardware Familiarity with schematic and PCB tools such as Cadence or OrCAD Understanding of PCB stack-up, layout constraints, and signal-integrity concepts Strong debugging abilities and experience using common lab instruments Core Competencies: Strong organization, planning, and problem-solving skills Ability to manage multiple tasks in a fast-paced environment Professional communication and confidentiality Works well independently and as part of a team Detail-oriented with strong follow-through Education: Bachelor's or Master's degree in Electronic Engineering or a related field Benefits: Medical, dental, and vision coverage Company-paid short- and long-term disability Flexible spending accounts Generous paid-time-off plan 401(k) with company matching Professional development opportunities Collaborative and supportive work environment On-site fitness facilities All qualified applicants will receive consideration for employment without regard to race, color, national origin, age, ancestry, religion, sex, sexual orientation, gender identity, gender expression, marital status, disability, medical condition, genetic information, pregnancy, or military or veteran status. We consider all qualified applicants, including those with criminal histories, in a manner consistent with state and local laws, including the California Fair Chance Act, City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, and Los Angeles County Fair Chance Ordinance. For unincorporated Los Angeles county, to the extent our customers require a background check for certain positions, the Company faces a significant risk to its business operations and business reputation unless a review of criminal history is conducted for those specific job positions.

About Us: We are working with a mission-driven SaaS company dedicated to keeping people safe. They're passionate about public safety and strive to create innovative solutions that keep their customer's happy. Job Description: As a Senior Staff Engineer, you will play a crucial role in building and maintaining our cutting-edge web applications. You will work closely with our engineering team to design, develop, and deploy robust, scalable, and user-friendly features. Onsite in Tampa, FL Area Up to 220k base salary Responsibilities: Design, develop, and maintain backend applications using Ruby on Rails. Build user-friendly and responsive frontend interfaces using React. Collaborate with cross-functional teams to define and implement new features. Write clean, well-tested, and efficient code. Qualifications: Strong proficiency in Ruby on Rails, React, and React Native. Experience with relational databases (e.g., PostgreSQL). Solid understanding of JavaScript and web development fundamentals. Familiarity with RESTful APIs and microservices architecture.

Early-Stage Project Manager Daily activities can include, but are not limited to: Primary responsibility is to take ownership of and work independently to actively manage a portfolio of assigned Solar projects through the Early-Stage processes to include Screening, Diligencing and Early-Stage Pipeline in preparation for turnover to Late-Stage Project Management. Leverage technical, commercial, and financial expertise to support and guide the broader team towards overall project, business unit, and/or corporate targets. Analyze technical and financial data, extrapolate notable variables, indicators, and trends. Proactively investigate, calibrate, and integrate broader market impacts into your portfolio of projects. Daily management of each assigned Solar project is all-encompassing. You are wholly responsible for delivering a technically feasibility, schedule appropriate, commercially supported, and financially viable project. Serve as development and permitting support, coordinate with and leverage subject matter experts, facilitate Engineering, actively engage in problem resolution, proactively manage your capital budget thru approvals, develop a viable construction plan/schedule, negotiate and execute on commercial contracts, investigate optimization opportunities. Support in the creation of, take ownership over, and actively manage not only each individual Solar project capital budget, but balance +/- variances across your portfolio of projects. Engage in a variety of software applications to support your activities, manage critical data and deliverables as well as report on key indicators. Support the larger Early-Stage team with process, tool, and training initiatives. Actively communicate and interface with Executive Leadership, Suppliers, Regulatory Agencies, Local Communities, and other stakeholders. Preferred Qualifications: Construction, Energy Industry, and/or Solar experience is a plus Required Qualifications: Bachelor's Degree in Business, Finance, Accounting, or Engineering Project Management Experience Strong financial and data analysis skillset Mechanical awareness and/or interest in technical variables Highly Organized Proactive attitude Inherent ability to manage fast paced high stress environment Capable of working independently

Job Details: Principal Full Stack Engineer Mode :: W2 Only (No C2C/1099) Top Skills: Hands on with Angular (expert level) application architecture fundamentals is a must. Role Overview: As a Principal Full Stack Engineer, you will play a pivotal role in building new application experiences and business capabilities to support a new business initiative. You will work closely with the Director of Engineering and multi-functional teams, driving technical decisions and ensuring the delivery of scalable, maintainable solutions. Key Responsibilities: Lead the design and development of modular, reusable front-end components in Angular, enabling sharing across multiple product teams. Expert level knowledge using Angular to build a single page application from scratch. Bonus points for experience with Storybook JS, React Native, Ionic and knowledge of micro-frontends architecture. Architect and implement robust back-end services using Java Spring Boot, JPA, and AWS, with a focus on scalable, secure, and maintainable solutions. Build and maintain the business API Domain model Champion standard methodologies in modular application design, including micro-frontends, shared libraries, and integration patterns. Collaborate with product, UX, and engineering teams to translate business requirements into technical solutions. Drive the adoption of modern CI/CD pipelines and DevOps practices for rapid, reliable delivery. Mentor and guide other engineers, fostering a culture of technical perfection and continuous improvement. Required Skills & Experience: 10+ years of professional software engineering experience, with a proven track record of delivering complex applications. 3 - 5 years of technical leadership experience Deep full-stack expertise in HTML, CSS, JavaScript, Angular, Java Spring Boot, JPA, AWS, and databases systems. Strong understanding of modular architecture, component sharing, and scalable design principles. Experience building and integrating RESTful APIs and working with cloud-native technologies. High degree of autonomy and ownership; able to drive projects forward with minimal oversight. Superb communication and collaboration skills, with the ability to influence and align stakeholders. Bonus Points: Experience with micro-frontends, Storybook JS, and API management tools. Prior work in a startup or incubator environment, building products from the ground up.

Project Engineer II- Licensed (Electrical) CSArch, an A/E firm with offices in Albany and Newburgh, NY is currently seeking a full-time Project Engineer for the Albany office. The Project Engineer II has at least 5 years of experience as a Licensed Engineer (Electrical). The successful candidate should possess an Associate's, Bachelor's, or Master's degree of Engineering. The candidate must have at least 3 years of Revit experience. This position is primarily responsible for the technical engineering and production aspects of medium to large projects from conceptual design through construction closeout. SPECIFIC DUTIES AND RESPONSIBILITIES: Leads in-house building systems design / engineering team through development of design and construction documentation process. Could also provide Project Engineer support as part of a larger project team on larger projects. Develops and coordinates with all engineering disciplines and architecture team to produce construction documents. Involved in field investigations, detailed engineering design work and development of design computations. Oversees code compliance with applicable engineering codes, standards and guidelines. Informs, directs and trains engineers-in-training and less experienced project engineers relative to these. Develops and coordinates engineering technical specifications. Adheres to and implements corporate contract documentation procedures and standards as they best apply. Responsible for all engineering aspects of construction administration including but not limited to shop drawing/submittal review and coordination, attending project meetings, developing field reports, periodic monitoring of construction sites, interfacing with contractors and clients. Supports project management with development of staffing, fee, budget estimating and project scheduling. Ensures that Quality Control procedures are being met. Will supervise small engineering staff and could have significant client contact. REQUIREMENTS/QUALIFICATIONS: Licensure Requirements: Licensed Education Requirements: Associate's, Bachelor's, or Master's degree of Engineering in electrical engineering. Experience: Minimum 5 years experience as a Licensed Engineer Computer Skills: Revit- minimum of 3 years experience and other design/presentation software programs; MS Office proficient; use of Adobe products; Submittal Exchange Excellent written, verbal and visual communication skills Detail oriented; highly organized; self-motivated; able to exercise independent judgment, multi-task, delegate, plan, set goals, meet critical deadlines, be accurate, work under pressure; conflict resolution/negotiation skills; team building and leadership skills. 40+ hours M-F; overtime as necessary to meet deadlines, travel, driving, occasional lifting/carrying up to 40 lbs. Site observations may involve outdoor weather, year-round, moving mechanical equipment, climbing ladders/scaffolding and observing high area construction activities. Noise level is often loud. Background check may be required. Requires use of hardhat, construction boots, and possibly other safety equipment as required on a construction site.

Local General Engineering Contractor seeks a Project Engineer for paving, grading, and underground projects. Ideal candidate should possess a minimum of 2 years of related project management and/or estimating skills. RESPONSIBILITIES: The Project Engineer is responsible for ensuring construction work complies with safety, specifications, cost guidelines, reporting requirements and field engineering activities for assigned projects. Major focus will vary depending on project needs and priorities. Maintains positive relationships with owners, community members and project team members. DUTIES: Able to perform all essential Project Engineer responsibilities. Attend and document project meetings. Set up and maintain electronic filing system as needed. Update and maintain all drawings, specifications and logs. Maintain a site-specific safety plan and pre-task planning process, including audits, meeting, training, etc. Review, analyze, and transmit submittals. Prepare and maintain submittal logs and procurement log. Perform expediting functions. Cost code and/or verify correct codes on time sheets. Code Accounts Payable workflows as assigned. Verify original estimate quantities for labor cost reports. Report quantities in place and maintain labor cost report. Prepare and document extra work orders. Review and assemble change order submittals and quantity surveys. Maintain record set drawings. Document punch list work. Complete other responsibilities as assigned. MINIMUM SKILLS: Bachelor's Degree in Construction Management or related field of study 2 years' work and field experience preferred. Construction related internship experience preferred. Basic understanding of construction cost accounting, estimating, and scheduling skills. Experience with HCSS, HeavyBid, Procore ideal, not required. Ability to read and understand plans and specifications. Effective organizational skills, strong work ethic, and eager to learn. Valid driver's license and reliable transportation.

Jr. Electrical Engineer - Altium/Cadence Allegro Design / Prototyping Position Description: Protingent Staffing has an exciting contract Jr. Electrical Engineer - Altium/Cadence Design / Prototyping opportunity with our client located in Bellevue, Washington. Onsite 5 days a week. Job Responsibilities: Collaborate to define product goals Conceive, design, evaluate, and produce novel gaming hardware. Job Qualifications: Bachelor's degree (or equivalent work experience) in electrical engineering or a related field Jr. Test Engineers, Jr. Design Engineers, Jr. Product Validation and Jr. DVEs are welcome 5 yrs. of proven start-to-finish design skills with Cadence Allegro or Altium Designer (preferred) including schematic entry, PCB layout, component definition, and CAD library managements 5 yrs. of hands on electronics prototyping experience, including soldering and rework of fine-pitch SMT components A proven track record of designing and shipping high-volume consumer electronics products Strong lab skills, including the use of common test and measurement equipment (oscilloscopes, logic analyzers, etc.) to debug and characterize complex electronic circuits Bonus if you have experience with Micro-Controllers Bonus if you have experience with 3D Printing Bonus if your hobbies include tinkering Job Details: Job Type: Contract Pay Rate Range: $50-$80/hr. Location: Bellevue, WA (Onsite). Benefits Package: Protingent offers competitive salaries, insurance plan options (HDHP plan or POS plan), education/certification reimbursement, pre-tax commuter benefits, Paid Time Off (PTO), and an administered 401k plan. About Protingent: Protingent is an Award-Winning provider of top-tier Engineering and IT talent, trusted by companies at the forefront of innovation - from Software and Aerospace to AI, Clean Tech, Medical Devices, and Connected Technologies. We're passionate about making a positive impact by connecting exceptional talent with meaningful opportunities and helping our clients build the future.