Quality assurance manager jobs in Alabama - 279 jobs

Allient Inc. is currently seeking a Quality Engineer to join our team in Dothan, Alabama! The Quality Engineer position works directly with production and engineering to audit and analyze manufacturing processes and products for improvement using various methods of problem solving, testing and inspection. Responsible for all aspects of the Quality Management System of the site. Apply now! Responsibilities: Develops, applies and maintains quality requirements and standards for development and manufacturing products by leading a “zero” defect culture across the organization through training, ongoing communication. Designs and implements methods for process control, process improvement, testing and inspection. Promotes and executes quality standards, inspection processes, test methodology, quality plans, documents and reports. Provides timely and robust quality corrective and preventive solutions to reduce generation of scrap and rework as well as external quality failures. Develops, executes and analyzes quality-reporting measures, COQ and COPQ both internal and external, identifies top opportunities, analysis, identify failures in need of prompt corrective action. Participates in internal and external quality audits as well as serves as the principle advisor on all quality certifications including ISO, AS 9100, etc. Monitors supplier quality performance and ensures incoming parts meet specified requirements. Works with suppliers on corrective actions. Minimum Qualifications: Bachelor's degree in Engineering, preferably Mechanical or Electrical or equivalent work experience in lieu of a degree. 0 - 8 years of work and/or intern/co-op experience in a technical, manufacturing environment Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Solid computer skills include MS Office, engineering design software such as Solidworks, MatLab, Altium, etc Physical Demands: The role is mostly office-based but may spend considerable time standing and walking on the production floor or development lab. May be required to operate a computer as well as some production machinery and lab equipment. Occasionally may have to lift and/or transport items weighing between 10 and 40 pounds. Work Environment: Predominately office environment with occasional exposure to the production floor and development lab. While on the production floor, employee may be subjected to moving mechanical parts and may be required to put on precautionary, protective wear such as safety glasses. Some travel may be required. Don't let this opportunity pass you by - APPLY TODAY! To learn more about Allient Inc. visit *************** * Allient Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Oversees and improves the AS9100/AS9110/ISO 9001 quality systems and applies in accordance with company and contractual requirements. Reviews status of customer (internal & external) rejections and recommends appropriate corrective action. Acts as a liaison with customers, vendors and various company departments. Responsible for contract review, flow-down requirements, manufacturing and MRO activities, meeting industry standards regarding new product introduction (APQP, PFMEA, Control Plans, MSA), process control and statistical analysis. Advises Senior Quality Manager of test trends, returns, vendor performance, audit results and corrective action needed. Responsible for the training, motivation and discipline of assigned employees. Supports the overall Corporate and Site quality function deployment and strategy. Reports to the Senior Quality Manager. Responsibilities and Tasks: To maintain daily management of QA personnel (QEs, QA inspectors, QA Quality Specialists) To keep personnel updated in inspection and test methods, quality standards, and quality system changes. To represent quality assurance in daily product operations and on-site government representatives. To conduct inspection activities regarding drawings and other Engineering processes. Daily management and administration of PQDR/Warranty processes and interactions. Responsible for contract review and customer internal and external flow downs Responsible for the QA function support for manufacturing and MRO activities Ensure that industry standards are met (New product introduction, APQP, PFMEA, Control Plans, MSA), process control and statistical analysis Daily administration activities of MRB processes. Process improvement both internal & external. The person assigned to this position has the full responsibility and authority to execute all essential duties as described above. Education, Experience & License or Certification: Bachelor's degree in Engineering, Science, Business Administration, or a related field 6 years of progressive experience in quality assurance, quality control, or process improvement roles. 2-3 years in a leadership or managerial capacity, overseeing teams and projects. Green or Black belt preferred Lean Manufacturing preferred Skills and Abilities: Deep understanding of quality management systems (QMS), ISO standards, Six Sigma, Lean, or similar frameworks. Proficiency in quality assurance methodologies, root cause analysis, corrective/preventive actions, and risk management. Ability to use analytical/statistical tools (e.g., Minitab, SPSS, Excel advanced functions) for data- driven decision making. Familiarity with regulatory requirements relevant to your industry (e.g., data privacy, software quality, safety standards)

B.L. Harbert International is looking for a Quality Control Manager for various locations overseas. The QC Manager will coordinate and manage a team of multi-national discipline engineers that will provide the infrastructure necessary to ensure the control of construction quality. Responsibilities: Coordinate with the BLHI Project Engineer and the BLHI Construction Superintendent in all matters related to the field Represent BLHI in all matters pertaining to Quality Control on-site with the client Manage the review and evaluation of technical requirements and documents for specified quality criteria Develop and manage QC inspection and test procedures and instructions for all trades Monitor on- and off-site QC facilities and activities assuring compliance with test procedure requirements Oversee and manage the QC staff to ensure that all contract requirements are being met Manage Quality Control inspections for all trades including closures and punch-lists Manage project close-out and commissioning activities Update and maintain the QC Plan, to include all documentation relevant to the implementation of the QC Program on and off site Consolidate and issue daily QC reporting for all trades for the project record Requirements: US citizen Ability to obtain and maintain a security clearance through the US Government Ability to travel abroad on assignments in the vicinity of the project for 24-36 months Physical Demands: To perform the duties of this job, the employee must: Have the ability to repetitively use hands to grasp, reach above and below with arms, and work overhead Have the ability to stand, sit, walk, stoop, kneel, squat, crawl, climb, bend, balance and twist for extended periods Have the ability to frequently lift and/or push or pull up to 40 pounds and occasionally lift and/or push or pull up to 75 pounds Possess the manual dexterity to utilize and operate construction tools and/or construction equipment and machinery Possess physical agility and mobility, to include safely maneuvering throughout the job site Work Environment: To perform the duties of this job, the employee Must be able to work 60-hours/week, six days/week, 10 hours/day May be exposed to fumes or airborne particles, moving mechanical parts and vibration Will have occasional exposure to a variety of extreme conditions at construction job sites including frequent loud noises Must be comfortable with regular work near moving mechanical parts and outside conditions that include inclement weather, heat and humidity, and exposure to dust and asphalt

We are seeking a Traveling Quality Control Manager (QCM) to support a large-scale data center project worth around $1B in Montgomery, Alabama. RCDD Certification is preferred for this role but not required. Benefits: * Competitive pay structure * Per diem and travel expenses covered * Opportunity for contract work for well known GC * Work on high-profile data center projects with clients like Meta * Career growth into senior superintendent, project management, or mission-critical specialist roles * This GC has steady, long-term work with repeat clients (data centers, federal facilities) Key Responsibilities: * Implement and manage the six-step quality control/safety process, including site-specific quality programs * Lead weekly QC meetings and maintain the project Quality Process Log (QPL) * Develop preparatory meeting agendas and participate in meetings prior to each definable feature of work * Interface directly with owner's quality assurance and management teams on all quality-related issues * Review inspection reports, punch lists, and close-in inspection results * Submit and review RFIs to ensure changes are implemented in the field * Coordinate trade partner test and inspection schedules and document daily QC activities * Audit trade partner QC procedures and report chronic issues to upper management * Select and coordinate third-party testing agencies and verify adherence to standards * Participate in source inspections and oversee QC personnel development Qualifications: * Bachelor's degree in Civil/Structural Engineering, Architecture, Construction Management, or equivalent experience * 5-7 years of experience on large commercial construction projects * Valid driver's license and ability to travel extensively * Strong communication and organizational skills * Proficiency in Microsoft Office Suite (Excel templates), Prolog, Primavera, and AutoCAD * RCDD Certification preferred but not required Work Environment: This is a fully Traveling QCM role. The current project is in Montgomery, Alabama. Job Type & Location This is a Contract position based out of Montgomery, AL. Pay and Benefits The pay range for this position is $55.00 - $67.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Montgomery,AL. Application Deadline This position is anticipated to close on Jan 24, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Arrowhead Contracting, Inc. has an exciting opportunity for skilled professionals to join our team. We are currently looking for a full-time Quality Control Manager to support our federal construction and renovation projects at various military bases in the southeastern US. We offer our Quality Control Managers a salary of $80,000 - $120,000/year, and we support earning licenses! Plus, our team enjoys great benefits and perks, such as: PTO Bonus structure Health insurance 401(k) Growth opportunities Company shirts Per diem Normal hours of onsite operations are Monday - Friday, 7:00 am - 4:00 pm. WANT TO KNOW MORE ABOUT US? Headquartered in Florida, Arrowhead Contracting, Inc. is focused on completing comprehensive construction services in the public and private sectors. From site utilities and building maintenance to earthwork and disaster relief, we provide a diverse range of services to meet our clients' needs. We have a rich history and a proven track record of delivering exceptional results, and we're hiring results-driven, customer-oriented people to help us reach even greater heights! If you're looking for a position where you can grow professionally and make a tangible impact on others, come build your career with us! DOES THIS SOUND LIKE YOU? 5+ years of experience as a quality control manager (QCM) for federal construction projects USACE CQM certification OSHA 30-hour class This position requires travel. Candidates with flexibility and willingness to travel may be given preference during the hiring process. Our ideal candidate has 7+ years of experience or has experience as a site safety and health officer (SSHO) for federal construction projects. As our Quality Control Manager, your role is crucial for the successful completion of our federal construction projects and for ensuring job site safety. You will be on-site, closely inspecting the work done by the field crew to ensure it meets our quality standards and client expectations. Initially, you will be responsible for this job site, and later on, you will oversee similar job sites across the region. Your duties will include checking safety standards, ensuring all workers adhere to company standards and job site requirements, completing safety reports, monitoring job progress, conducting weekly progress meetings, preparing 3-week look aheads, and serving as a government site liaison. Additionally, you will hold daily site safety meetings and prepare safety presentations based on the work being performed each day. Other duties include: Overseeing and making decisions related to the performance of work related to scheduling, delivery, logistics, and quality control Overseeing work among assigned trades to promote a coordinated project operation Resolving local area problems regarding procedures, precedence, design clarifications, adequate labor and equipment, schedule, and all other appropriate matters Managing the overall site safety program as required and ensuring subcontractor compliance with company standards and all applicable safety codes and regulations Creating schedules and determining sequencing of work. Developing and implementing recovery strategies to maintain the project schedule Communicating with owners and architects/engineers in connection with field issues. Investigating and resolving such issues Managing the work to ensure that it is installed in compliance with and conforms to the approved contract documents READY TO APPLY? If you're ready to become our Quality Control Manager, apply today with our short initial application. Must be able to pass a background check to get on military bases.

Baptist Health Alabama Region Baptist Health is seeking a dedicated, experienced Regional Clinical Quality Program Manager to lead peri-operative quality initiatives across its five hospitals in Alabama. This regional role is instrumental in enhancing surgical safety, ensuring compliance with CMS surgical quality measures, and driving continuous improvement in patient outcomes. The Regional Clinical Quality Program Manager serves as a subject matter expert and member of the quality team. Their role includes leading, coordinating, and supporting quality activities and projects at a system or regional level. This position is limited to regional or corporate quality departments. Responsibilities Region-Wide Quality Oversight: Monitor and evaluate surgical and peri-operative quality performance metrics across all Baptist Health hospitals in Alabama, ensuring alignment with CMS guidelines and internal benchmarks. Surgical Safety Leadership: Champion best practices in peri-operative safety, including standardized protocols for pre-op, intra-op, and post-op care. Facilitate adoption of evidence-based tools such as surgical safety checklists and time-outs. CMS Compliance & Reporting: Ensure accurate documentation and timely submission of surgical quality data to meet CMS requirements including IQR and eCQM measures as applicable, infection prevention (SSIs), and adverse event tracking. Performance Improvement: Lead multidisciplinary reviews and root cause analyses in collaboration with quality and hospital leaders to identify region-wide trends and implement corrective actions. Develop and monitor action plans to achieve measurable improvements. Education & Engagement: Provide training and support to peri-operative teams on regulatory standards, quality documentation, and continuous improvement strategies in collaboration with regulatory and professional development leaders. Regional Collaboration: Serve as a strategic liaison among surgical departments, anesthesia, infection prevention, and quality teams across all five hospitals to foster a unified culture of safety and excellence. Qualifications Education/Training Bachelor's degree. Masters preferred Licensure/Certification Registered Nurse Certification in healthcare quality and safety (e.g., CPHQ, CPPS) within one year of hire. Experience Seven (7) years' experience in acute care or other applicable healthcare settings. Five (5) of the seven (7) years MUST be in perioperative services and clinical quality improvement. Strong knowledge of CMS surgical quality measures and regulatory compliance. Ability to travel across Baptist Health facilities in Alabama as needed.

QUALITY MANAGER (Direct Hire, NOT a Contract) **Apply with Resume Today! Coordinate and direct QC program to ensure continuous production of products consistent with standards Trouble shooting on the floor is there is any non conformance existing on the part and prepare cap/study Plans, coordinates and directs quality control program designed to ensure continuous production of products consistent with IATF standards by performing the following duties personally or through subordinate supervisors: Develops and analyses statistical data and product specifications to determine present standards and establish proposed quality and reliability expectancy of finished product Formulates and maintains quality control objectives and coordinates objectives with production procedures in cooperation with other plant managers to maximize product reliability and minimize costs Directs workers engaged in inspection and testing activities to ensure continuous control over materials, facilities and products Plans, promotes, and organizes training activities related to product quality and reliability Investigates and adjusts customer complaints regarding quality Employee Q.A. training on SPC technique, problem solving using SPC methods Upgrade quality related facilities (Q.A. lab, inspection equipment and documentation) Prepare and update control plans (receiving, in process, final and welds effectiveness if necessary) Determine SPC characteristics, include control plans Prepare sample submission packages **Apply with Resume Today!

Responsibilities Brasfield & Gorrie has an exciting opportunity for a Quality Control Manager to join our team. Responsibilities and general duties include the following: * Assist project team including Superintendent and Project Manager onsite with quality control efforts and help lead the culture of quality on the jobsite * Maintain physical presence on jobsite during work performed in area of responsibility * Perform and document the three phases of control, final inspections, and closeout * Inspect all materials, construction, plant and equipment for conformance with the technical specifications * Perform all QC tests as required by the technical specifications * Ensure that the completed project meets all quality requirements of the contract * Verify that all provisions have been made to provide required quality control testing * Monitor contactor's daily work progress * Check dimensional requirements and verify calibration records of IMT Equipment * Visually inspect materials received on site for proper documentation, completeness, and condition * Observe and coordinate all required tests and inspections to verify that they are in compliance with the specifications * Complete and maintain accurate records of inspections and tests * Ensure the proper documentation and corrective action of all deficiencies in materials and workmanship is done in a timely manner * Conduct routine surveillances and maintain the system for document control on the project and jobsite * Work closely with all testing agencies to verify that all tests are properly performed * Assist in the development of a Site-Specific Quality Plan which ensures that all contractual requirements are carried out in conformance to Contract Documents and applicable standards * Maintain procedures and carry out field training activities to ensure that quality requirements are communicated to all levels of the field organization, including trade contractors * Communicate the quality control plan to all parties involved in the construction project such as Quality Assurance, Subcontractors, Architect and Engineer Education - Skills - Knowledge - Qualifications & Experience * Bachelor's degree in engineering or construction management required * Five (5) years of related field experience in heavy industrial, wastewater treatment plant, infrastructure, or power plant construction * USACE/NAVFAC QCM Certified preferred * Ability to read, interpret, and understand drawings and technical specifications * Proficient in Microsoft Office Suite (especially Excel) * Technical knowledge of quality control processes * Excellent verbal and written communication skills and interpersonal skills * Travel and relocation may be required

CQCM is responsible for establishing and maintaining the quality of work and control of the construction activities, and of implementing the Quality Control Plan for the project. The CQCM will assist in developing work plans and is responsible to verify that all features of work are in compliance with the contract requirements. Quality Control System (QCS) Manager - QC will input and/or track that all pertinent information is being included in the QCS daily. This includes but is not limited to Contract Administration, Finances, Quality Control (Daily Reports, Deficiency Reports, Requests for Information (RFIs) Work Plans, Accident Hazard Analysis (AHA), etc.), Submittals, Scheduling, Data Import/Export Sets up field filing system and maintains during the life of the project Drafts, maintains, and files daily reports (including safety reports) Performs Quality Control for all elements of work (planning, performance, compliance, and inspection) Submittal Register Owner - new submittals, resubmittals, verification of compliance, deviations, justifications, waivers, etc. Field Material Receiver (check for compliance and of all delivered and stored material and equipment and implementation of manufacturer's recommendations and file paperwork in field) Conducts Preparatory and Initial Meetings All permits received All equipment that will be on site Laydown plan Material storage Construction procedures Contingencies Compliance to specifications (how we are addressing the specifications for the particular feature of work) Access (ingress and egress) Utilities (interferences, outages, etc.) Design Changes (RFIs & RFPs) Outline of Subcontractor Coordination (subcontractors involved need to attend, but not present) Public Notices and Permits Facilitates for the schedule to move forward - Feedback for Next Day and Three Week Lookaheads, submittals in place, work plans reviewed, preparatory meetings scheduled and/or completed, issues or conflicts addressed. Skills and Qualifications Ability to address issues with all features of work at the site Knowledge of all the necessary coordination to complete project scope Good decision maker - desire to make decisions based on compliance, practicality, sound fact and for the benefit of the company Ability to work and communicate in a team atmosphere Computer Literate including Microsoft Office (a plus for knowledge in USACE RMS, CMIC) Knowledge in reading plans and interpreting specifications Training in the 3-Phase Quality Control Programs (USACE CQCM) General knowledge in First Aid/CPR, OSHA regulations Knowledge and/or Training in Confined Spaces, Rigging, Scaffolding Inspection, Benching and Shoring, Fall Protection and other safety procedures needed to complete the scope of the project. Innate desire to bring the client a quality based, fully compliant project. General knowledge of the Electrical Code, the International Mechanical Code, Plumbing Code, other Building and Industry Codes and Standards, LEED and Sustainability, etc. Experience Construction Quality Control: 3 years (Preferred) Construction industry with vertical building experience: 5 years You can also apply here: *************************************************************************

CCI Facility Contractors is expanding its workforce and is seeking a Quality Control Manager. We are committed to fostering a work environment that offers long-term stability and growth. We value our employees and are dedicated to supporting their success throughout their career with us. With a strong track record of consistent growth, we provide a secure and dependable workplace for those looking for a lasting career. The Quality Control Manager (QCM) in the federal construction industry is responsible for overseeing and ensuring the quality of construction projects, including complex electrical infrastructure and substation construction, in compliance with all contractual requirements. This role manages and coordinates quality control activities; implements quality assurance procedures; and conducts inspections to verify that materials, equipment, installation practices, and workmanship meet project specifications, industry standards, and federal regulations. The QCM develops and maintains the project quality management system, reviews submittals, monitors testing and inspections, and addresses non-conformance issues by ensuring timely and effective corrective actions. For substation projects, this includes oversight of high-voltage equipment installation, grounding systems, protective relaying, and coordination with safety and commissioning teams. The position requires strong knowledge of federal construction standards, electrical codes, and safety regulations, along with the ability to lead teams, communicate effectively with stakeholders, and ensure all deliverables meet or exceed established quality benchmarks, playing a critical role in the successful execution and completion of federal construction projects. CCI Facility Contractors offers a great benefits package complete with medical, dental, and vision insurance, health savings account health reimbursement account, flexible spending account, employer paid life and disability, 401(k) matching, and paid time off along with other essential benefits. This position will report to our office location in Huntsville, AL at Redstone Arsenal. Essential Duties & Responsibilities The Essential Duties and Responsibilities are intended to present a descriptive list of the range of duties, but not all duties performed for this position. Other duties may be assigned. Develop, administer, and ensure compliance with the Quality Control Plan for projects, following the Army Corps Three Phases of Control. Certify that all submittals, plans, and specifications meet contract requirements, and oversee evaluations and testing by approved personnel or facilities. Provide documented evaluations and corrective actions to maintain high-quality standards and minimize recurring issues. Minimum Qualifications: To perform this position successfully, an individual must be able to perform each essential duty satisfactorily. The qualifications listed are representative of the knowledge, skill, and/or ability required. OSHA 30 hour USACE CQM Certification Experience with Procore and RMS Proficient with Word, Excel, and PDF Proven experience as a QCM on similar federal projects In-depth knowledge of quality control procedures and legal standards Strong attention to detail and problem-solving skills Excellent organizational and leadership abilities Additional Qualifying Factors: As a condition of employment, you will be required to pass a pre-employment drug screening (post accepted offer) and have acceptable background check results. If applicable to the contract, you must also obtain the appropriate clearance levels required and be able to obtain access to military installations. Necessary Physical Requirements: The physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position requires the ability to maneuver around work sites, see, hear, and verbally communicate with co-workers and clients. Essential and marginal functions may require maintaining physical condition necessary for bending, stooping, sitting, walking or standing for prolonged periods of time; frequent opportunity to move about and to work outside the office environment for extended periods involving exposure to the elements with weather that will include extreme heat, cold, wind, rain or other inclement weather, walking over rough and uneven surfaces, and routine lifting of up to 35 pounds. If required, must properly use personal protective equipment (PPE) at all times including but not limited to: hard hats, steel toed boots, eye protection, respiratory protection, and hearing protection. Must always maintain a constant state of mental alertness. Working Conditions: Job is performed in a combination of office and outdoor site locations. The office setting includes exposure to computer screens and requires extensive use of a computer, keyboard, and mouse. Outdoor settings include walking, driving, and carrying supplies throughout all seasons with exposure to heat and cold conditions, and potentially wildlife. Is occasionally exposed to fumes or airborne particles, toxic or caustic chemicals and loud noise. About Bristol Bay Construction Holdings LLC BBCH is a holding company of Bristol Bay Native Corporation, an Alaska Native Corporation. The BBCH family of companies include 8(a), small, and large businesses operating under the Aerostar, CCI, CSI, Herman, and SES brands. The vision of BBCH is to be best value companies and employers of choice, recognized for our dedication to our unity of purpose, values, employees, clients, and shareholders. For three decades, our best-value companies have provided federal and commercial clients with superior quality and cost-effective, innovative, and sustainable solutions for general construction, restoration services, civil works, fuels systems, environmental services, professional services, and facility support services. BBCH gives hiring, promotion, training, and retention preference to BBCH shareholders, shareholder descendants, and shareholder spouses who meet the minimum qualifications for the job. We are an equal-opportunity employer. All applicants will receive consideration for employment, without regard to race, color, religion, creed, national origin, gender, or gender identity, age, marital status, sexual orientation, veteran status, disability, pregnancy or parental status, or any other basis prohibited by law. We participate in the E-Verify Employment Verification Program. We are a drug-free workplace.

Job Description Quality Control Manager (QCM), Federal Construction Columbus, GA Full-Time, Onsite, Federal Project Assignment About the Role We are seeking an experienced Quality Control Manager (QCM) to support federal government construction projects in the Columbus, GA area. This role is critical to ensuring all construction activities comply with contract documents, USACE standards, EM 385 requirements, and applicable federal regulations. The QCM will serve as the primary point of contact for quality-related matters and will work closely with the Project Manager, Superintendent, subcontractors, and government representatives. Key Responsibilities Develop, implement, and manage the Contractor Quality Control (CQC) Plan in accordance with USACE and DoD requirements Conduct and document the Three-Phase Control Process: Preparatory, Initial, and Follow-Up Inspections Review and manage submittals, RFIs, and quality documentation for compliance with contract specifications Perform daily quality control inspections across all phases of construction including civil, structural, architectural, and MEP work Prepare and submit daily QC reports, inspection logs, deficiency tracking, and corrective action documentation Coordinate and lead preparatory meetings, initial inspections, and quality coordination meetings Interface directly with Government QA personnel and participate in inspections, audits, and site walks Ensure work is executed in accordance with approved plans, specifications, and safety standards Track deficiencies, oversee corrective actions, and verify closeout compliance Support project closeout activities including punch lists, as-builts, and final inspections What We're Looking For Minimum 5 years of experience as a Quality Control Manager on federal construction projects Demonstrated experience working on USACE, NAVFAC, or other DoD projects Strong knowledge of federal construction standards, quality processes, and documentation requirements Experience coordinating with government inspectors and contracting officers Ability to manage multiple features of work and maintain organized quality records Strong communication skills and attention to detail Required Certifications & Qualifications USACE Construction Quality Management (CQM) for Contractors Certification OSHA 30-Hour Construction Safety Certification Working knowledge of EM 385-1-1 safety standards Ability to pass federal background requirements and site access credentials Valid driver's license Why Join Us? Work on stable, long-term federal government construction projects Clear scope, defined quality standards, and structured project environments Opportunity to work with experienced federal project teams Competitive compensation based on experience and certifications Total Rewards & Benefits Competitive salary or hourly compensation based on experience Per diem, lodging, and travel support if applicable Health insurance options and paid time off Consistent federal project pipeline Apply Today Qualified candidates are encouraged to apply to be considered for current and upcoming federal construction projects in the Columbus, GA area. Confidential inquiries are welcome.

* Assess sub-contractors' capabilities to meet the quality requirements of the project as required. * Responsibility for the performance of all MEP inspection and testing activities. * On Design-Build projects, assist with design reviews and contract document/code conformance. * Complete responsibility for the entire MEP & FP submittal process. * Assure that the contract obligations' for testing and record keeping are adhered to. * Control calibrated measuring and test equipment used on the project. * Keep calibration records and ensure that all testing equipment has current calibration records. Ensure proper turnover of complete quality control package(s). Responsible for ensuring that turnover documentation is maintained, organized and turned over on schedule. * Maintain project quality records for the construction phase of the project and quality audit plans, performance and management thereof. * Perform evaluations of sub-contractors' facilities to determine their capabilities in meeting the quality requirements. * Conduct periodic Quality Program training for site supervisory personnel. * All other duties as normally required by our QC Department, and as required by day-to-day business. * Work with in precise limits and standards of accuracy * Work within the BLHI company policy, BLHI Safety Manual and OSHA Safety rules. Perform other duties as assigned by the supervisor as needed. Requirements: * Five (5) years of formal training and experience on industrial, commercial, or federal projects. * Must have a comprehensive understanding of mechanical, electrical, plumbing and controls systems as it pertains to installation, coordination, operation, and start-up and commissioning. * Ability to effectively interact with project team members, clients, subcontractors, and craft employees. * Must be capable of obtaining or possess inspection licenses and/or certifications as required

Do you want to build a better future? Enfinity Global is a purpose-driven company focused on making a positive impact on the planet by helping companies, governments, and individuals transition to a carbon-free and sustainable economy. Our role as a leading IPP is to develop, finance, build, operate, and own renewable energy assets in the long term in Europe, Asia, and the Americas through our offices in the USA, Spain, Italy, UK, Netherlands, India, and Japan. Our team of over 350 Enfiniters comprises seasoned finance professionals, as well as experienced project developers and operators with extensive industry experience across all stages of the project life cycle. We pride ourselves on being creative and innovative solution providers to our customers and partners. Job Description Enfinity Global is seeking a Quality Control Manager to support and oversee quality control and assurance activities for renewable energy projects in USA, including Solar, Wind, and Battery Energy Storage Systems (BESS). This role will work closely with the Site Manager and project teams to ensure construction quality, compliance with standards, and smooth execution of quality processes throughout the project lifecycle. Key Responsibilities: Construction Quality Management Implement project-specific Quality Control Plans (QCPs) and ensure adherence to technical requirements. Conduct inspections and monitor site activities to verify compliance with design specifications and safety standards. Document and track non-conformance issues (NCRs) and assist in implementing corrective actions. Verify materials and equipment delivered to site meet approved specifications. Participate in quality meetings and maintain proactive communication with contractors and site teams. Supplier & Material Quality Coordinate with suppliers and subcontractors to resolve quality issues. Assist in pre-dispatch inspections and factory acceptance tests (FAT) when required. Compliance & Documentation Ensure compliance with relevant Indian and international standards. Maintain accurate records of inspections, tests, and quality reports. Support third-party inspections and audits as needed. Continuous Improvement Analyze recurring issues and suggest improvements. Support root cause analysis (RCA) and corrective/preventive actions (CAPA). Learn and apply best practices for quality management and digital tools for documentation. Requirements 5-7 years of experience in quality roles within construction. Renewable energy projects is a plus. B.Tech/BE in Electrical or Mechanical Engineering. Familiarity with ISO 9001 standards and quality processes. Strong understanding of site quality control and documentation. Good communication and problem-solving skills. Ability to work in a fast-paced, multi-site project environment. In Enfinity Global, you will find a very dynamic and multinational environment in one of the most exciting and impactful industries. Here we will foster your professional and personal growth, and you will have the opportunity to actively contribute and make a real impact on climate change. Let's build our future together. Visit ******************* to discover more about our culture and values. Benefits Health Care Plan (Medical, Dental & Vision) Retirement Plan (401k, IRA) Paid Time Off (Vacation, Sick & Public Holidays) Short Term & Long Term Disability

We are seeking an outstanding individual to fill the position of Quality Assurance Coordinator at Aviagen's GGP Hatchery in Elkmont, AL. This role is a critical part of the Hatchery team to ensure Aviagen's quality objectives are maintained and to verify conformance of activities to quality assurance standards. This position will work closely with the GGP Hatchery and production teams and will report directly to the GGP QA and Regulatory Manager. Job Description: The ideal candidate should have the following experience, skills, and attributes: Bachelors of Science or equivalent preferred. Strong computer skills including Microsoft Excel (with Pivot Tables), PowerPoint, and Word. Must be able to perform occasional physically demanding aspects of the job. Able to work flexible hours and weekends. Above average math skills and problem-solving abilities, with an emphasis on data collection and analysis. Knowledge of hatchery and poultry operations preferred. Knowledge and familiarity with sampling procedures to include bacterial and mold monitoring. Detail oriented, professional, strong organizational skills, and self-motivated. Preferred understanding of ISO 9001:2015 or equivalent. Preferred knowledge of hatchery and poultry operations. Key Responsibilities: The following duties will vary according to the needs of the organization. Normal duties will include, but are not limited to, the following: Quality assurance checks on day old chicks and eggs. Assist in revising and updating the quality assurance manual and procedures. Observe and ask employees questions pertaining to job functions. Maintain strong communication with the GGP Hatchery management team, and interact and communicate with all levels of facility personnel. Read processing information such as worker logs, product processing sheets, and specification sheets to verify that records adhere to quality assurance specifications. Aptitude to determine appropriate corrective actions and root cause analysis. Perform routine facility monitoring, tests, and sample collection. Interact and communicate with all levels of hatchery personnel. Recognize problems and opportunities for improvement that may affect quality, and aid in coming up with and implementing solutions (determine appropriate corrective actions and root cause analysis). Write and submits report to hatchery supervisory personnel and QA Management team. Maintain and upload paperwork in a timely manner. Follow policies and procedures related to animal welfare, biosecurity, and compartmentalization. Other duties as determined by QA Management team. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

The Quality Compliance Manager (QCM) is responsible for developing, implementing, and overseeing the Quality Compliance program. This role ensures that all service operations, facility management programs, and technical maintenance activities meet the highest standards of safety, compliance, and performance. The QCM works closely with regional and site leadership to monitor adherence to company standards, client requirements, and regulatory obligations. This individual will lead compliance initiatives, conduct audits, and partner with stakeholders to drive continuous improvement and consistency across all Services operations. This is a safety-sensitive position. Pay Range: * $100-$140k/yrly Position Qualifications: * Bachelor's degree in engineering, construction management, facility management, or related field; equivalent professional experience may be considered. * 5-10 years of experience in quality compliance, quality assurance, or program management in facilities, construction, or technical services. * Preferred: BICSI Certified Technician * Experience supervising and mentoring technical staff (engineers, inspectors, auditors). * Ability to work in a fast-paced environment and be able to function as part of a high-performance team. * Ability to work collaboratively in mobile work environment. * Advanced skills in data-driven decision-making, performance metrics, and continuous improvement processes. * Knowledgeable with software in MS Office (Excel, Project, Word, SharePoint). * Ability to work under pressure and meet deadlines. * Effective written and oral communications skills and detailed. * Valid driver's license. Essential Duties: * Conduct regular audits of service delivery, facility operations, and technical maintenance programs to ensure compliance with company, client, and regulatory requirements. * Supervise and oversee telecommunications closets. * Lead compliance and quality review meetings, producing actionable outcomes for continuous improvement. * Review compliance data, reports, and corrective action plans; ensure timely and effective resolution of issues. * Maintain and update compliance logs, audit findings, and corrective actions in alignment with company standards. * Coordinate with third-party auditors, regulators, and clients on quality and compliance-related matters. * Provide training, guidance, and coaching to managers and staff on compliance requirements and quality standards. * Participate in regional and corporate initiatives to standardize and improve compliance frameworks across the Services business unit. * Track key performance indicators (KPIs) and develop reports to leadership on compliance performance, risk areas, and improvement opportunities. * Partner with Regional Directors, Site Managers, and technical staff to establish quality and compliance goals, monitor progress, and resolve deficiencies. * Supervise and train other technicians. Physical Work Classification & Demands: * Heavy Work. Exerting up to 100 pounds of force occasionally, and/or up to 50 pounds of force frequently, and/or up to 20 pounds of force constantly to move objects. * The individual in this position will periodically walk, kneel, sit, crouch, reach, stoop, read/see, speak, push, pull, lift, stand, and finger/type. The frequency of each action varies by workflow and field activity. * Walking - The person in this position needs to frequently move about the jobsite. * Sometimes operates a computer or tablet and other office machinery, such as a calculator and phone. * The person in this position frequently communicates with employees and external stakeholders regarding a variety of topics related to office and field administration. * Constantly reads written communications and views mail submissions. Will also need to read blueprints and take/verify field measurements. * Climbing - Ascending or descending ladders, stairs, scaffolding and ramps at various heights. * Balancing - Ability to maintain body equilibrium to prevent falling and to walk, stand or crouch. * Stooping - Bending the body downward and forward by the spine at the waist. * Reaching - Extending hand(s) and arm(s) in any direction for various lengths of time. * Grasping - Needs to apply pressure to an object with fingers and palm regularly. * Visual acuity and ability to operate a vehicle as certified and appropriate. * Occasionally exposed to high and low temperatures. * Frequently exposed to noisy environment and outdoor elements such as precipitation and wind. Job Type & Location This is a Permanent position based out of Montgomery, AL. Pay and Benefits The pay range for this position is $90000.00 - $100000.00/yr. Generous benefits for our fulltime employees. This position is eligible for company paid medical insurance, life insurance, accidental death & dismemberment, long-term disability, 401(K) retirement plan, and our employee assistance program (EAP). Employees are also eligible for employee paid enrollment in vision and dental insurance. Workplace Type This is a fully onsite position in Montgomery,AL. Application Deadline This position is anticipated to close on Jan 30, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Job Description Arrowhead Contracting, Inc. has an exciting opportunity for skilled professionals to join our team. We are currently looking for a full-time Quality Control Manager to support our federal construction and renovation projects at various military bases in the southeastern US. We offer our Quality Control Managers a salary of $80,000 - $120,000/year, and we support earning licenses! Plus, our team enjoys great benefits and perks, such as: PTO Bonus structure Health insurance 401(k) Growth opportunities Company shirts Per diem Normal hours of onsite operations are Monday - Friday, 7:00 am - 4:00 pm. WANT TO KNOW MORE ABOUT US? Headquartered in Florida, Arrowhead Contracting, Inc. is focused on completing comprehensive construction services in the public and private sectors. From site utilities and building maintenance to earthwork and disaster relief, we provide a diverse range of services to meet our clients' needs. We have a rich history and a proven track record of delivering exceptional results, and we're hiring results-driven, customer-oriented people to help us reach even greater heights! If you're looking for a position where you can grow professionally and make a tangible impact on others, come build your career with us! DOES THIS SOUND LIKE YOU? 5+ years of experience as a quality control manager (QCM) for federal construction projects USACE CQM certification OSHA 30-hour class This position requires travel. Candidates with flexibility and willingness to travel may be given preference during the hiring process. Our ideal candidate has 7+ years of experience or has experience as a site safety and health officer (SSHO) for federal construction projects. As our Quality Control Manager, your role is crucial for the successful completion of our federal construction projects and for ensuring job site safety. You will be on-site, closely inspecting the work done by the field crew to ensure it meets our quality standards and client expectations. Initially, you will be responsible for this job site, and later on, you will oversee similar job sites across the region. Your duties will include checking safety standards, ensuring all workers adhere to company standards and job site requirements, completing safety reports, monitoring job progress, conducting weekly progress meetings, preparing 3-week look aheads, and serving as a government site liaison. Additionally, you will hold daily site safety meetings and prepare safety presentations based on the work being performed each day. Other duties include: Overseeing and making decisions related to the performance of work related to scheduling, delivery, logistics, and quality control Overseeing work among assigned trades to promote a coordinated project operation Resolving local area problems regarding procedures, precedence, design clarifications, adequate labor and equipment, schedule, and all other appropriate matters Managing the overall site safety program as required and ensuring subcontractor compliance with company standards and all applicable safety codes and regulations Creating schedules and determining sequencing of work. Developing and implementing recovery strategies to maintain the project schedule Communicating with owners and architects/engineers in connection with field issues. Investigating and resolving such issues Managing the work to ensure that it is installed in compliance with and conforms to the approved contract documents READY TO APPLY? If you're ready to become our Quality Control Manager, apply today with our short initial application. Must be able to pass a background check to get on military bases. Job Posted by ApplicantPro

HIRING Quality Manager 3 to 5 Years Experience as Quality Manager for Manufacturer Working Knowledge of the following: APQP / PPAP / 5S / TS16949 Support and Maintain PFC, PFMEAS, MQC and PQCTs Devise Sampling Procedures, Designs and Develop Forms, Instructions for Recordings and Evaluating Data Ensure Quality System is Maintained Develop and Implement Methods and Procedures for Disposition of Discrepant Material and Devise Methods to Assess Cost and Responsibility Establish Program to Evaluate Precision and Assurance of Inspection Measuring and Test Equipment (IMTE) Develop and Initiate Standards and Methods for Inspection, Testing, and Evaluatioe Devise Sample Procedures, Designs, and Develop Forms and Instructions for Data Ensure Quality System is Maintained **Send Resume Today!

CQCM is responsible for establishing and maintaining the quality of work and control of the construction activities, and of implementing the Quality Control Plan for the project. The CQCM will assist in developing work plans and is responsible to verify that all features of work are in compliance with the contract requirements. Quality Control System (QCS) Manager - QC will input and/or track that all pertinent information is being included in the QCS daily. This includes but is not limited to Contract Administration, Finances, Quality Control (Daily Reports, Deficiency Reports, Requests for Information (RFIs) Work Plans, Accident Hazard Analysis (AHA), etc.), Submittals, Scheduling, Data Import/Export Sets up field filing system and maintains during the life of the project Drafts, maintains, and files daily reports (including safety reports) Performs Quality Control for all elements of work (planning, performance, compliance, and inspection) Submittal Register Owner - new submittals, resubmittals, verification of compliance, deviations, justifications, waivers, etc. Field Material Receiver (check for compliance and of all delivered and stored material and equipment and implementation of manufacturer's recommendations and file paperwork in field) Conducts Preparatory and Initial Meetings All permits received All equipment that will be on site Laydown plan Material storage Construction procedures Contingencies Compliance to specifications (how we are addressing the specifications for the particular feature of work) Access (ingress and egress) Utilities (interferences, outages, etc.) Design Changes (RFIs & RFPs) Outline of Subcontractor Coordination (subcontractors involved need to attend, but not present) Public Notices and Permits Facilitates for the schedule to move forward - Feedback for Next Day and Three Week Lookaheads, submittals in place, work plans reviewed, preparatory meetings scheduled and/or completed, issues or conflicts addressed. Skills and Qualifications Ability to address issues with all features of work at the site Knowledge of all the necessary coordination to complete project scope Good decision maker - desire to make decisions based on compliance, practicality, sound fact and for the benefit of the company Ability to work and communicate in a team atmosphere Computer Literate including Microsoft Office (a plus for knowledge in USACE RMS, CMIC) Knowledge in reading plans and interpreting specifications Training in the 3-Phase Quality Control Programs (USACE CQCM) General knowledge in First Aid/CPR, OSHA regulations Knowledge and/or Training in Confined Spaces, Rigging, Scaffolding Inspection, Benching and Shoring, Fall Protection and other safety procedures needed to complete the scope of the project. Innate desire to bring the client a quality based, fully compliant project. General knowledge of the Electrical Code, the International Mechanical Code, Plumbing Code, other Building and Industry Codes and Standards, LEED and Sustainability, etc. Experience Construction Quality Control: 3 years (Preferred) Construction industry with vertical building experience: 5 years You can also apply here: *************************************************************************

* Create, update and maintain the project submittal log and all other project specific quality control reports * Review shop drawings and submittals for conformance with project specifications by direct review and by leveraging the knowledge and experience of others in the project team when necessary * Chair and document weekly QC meetings with the superintendent and provide written minutes as described in project specific contract documents * Provide written daily QC reports that reinforce activities that are being constructed in conformance with each specific project's established standard and constructively confronts non-conformances to produce the desired outcome in a timely manner * Conduct preparatory, initial and follow-up meetings to establish an understanding of the standards of care desired for each definable feature of work. Verify that checklists are being used and signed off prior to the placement of concrete, steel and other similar items of work * Verify and document that all materials received for the project are in conformance with the approved submittal, are handled and stored appropriately and are acceptable for use in the project * Schedule, document the results of, and maintain a log of all code and independent inspections that are required. Clearly document, correct and re-inspect all non-conformances prior to covering up work * Conduct periodic follow-up inspections to verify that work is proceeding with the contract documents and the approved submittals. * Document final inspections, certificates of occupancy and acceptance of the works and various phases thereof * Stop work if necessary to resolve matters that affect safety, quality and/or inhibit the logical progress of work Compensation & Benefits * Competitive salary * Blue Cross health and dental group insurance benefits * Company-provided Life, AD&D, and Long-term Disability (LTD) benefits * Company paid vacation and holidays * 401 * Relocation (if necessary) * Monthly living allowance (if applicable)