Quality assurance manager jobs in Caldwell, ID - 292 jobs

Spectra Tech, Inc. is hiring for a Quality Assurance Manager in Idaho Falls, ID This is a multi-functional position with primary responsibility as the NRC Licensed Facilities (NLF) Quality Assurance Manager. Responsibilities include implementing and maintaining the NLF Quality Assurance Program (QAP) and ensuring compliance with NRC requirements and quality standards across all quality-affecting activities. Primary Responsibilities Develop, review, approve, issue, and maintain NLF implementing QA procedures. Verify and ensure that the QAP is properly established and executed. Ensure that quality is verified by personnel independent from the work and ensure that the QAP is adequate and being effectively implemented. Ensure QA training and qualification programs are developed for NLF personnel who perform quality-affecting activities. Develop, manage, update, and implement a QA Audit Plan and schedule, and coordinate NRC participation in audit activities. Identify quality problems; initiate, recommend, or provide solutions to quality problems; and verify the implementation of solutions to quality problems. Ensure the causal analysis for significant conditions adverse to quality (SCAQs) are appropriate, determine the cause of significant conditions adverse to quality, and ensure corrective actions are initiated for all conditions adverse to quality. Accept final resolution for NLF audit findings and proposed corrective actions. Initiate stop-work orders within the license oversight program when required. Receive and compile QA information and forward QAP status reports to management. Interface with NRC to coordinate and clarify NRC QA requirements, the QAP, and to resolve QA issues related to NRC requirements. Interface with NRC to coordinate plans and schedules relevant to QA for NRC oversight of licensing activities. Interpret and approve QAP requirements as they apply to the NLF scope of work. Ensure, along with the Program Manager, that the NLF QAP is implemented by trained personnel with adequate resources so that cost and scheduling considerations do not override the QAP's function. Ensure any revisions to the Quality Assurance Requirements Document (QARD) are reviewed and incorporated into implementing documents, as appropriate. Additional Responsibilities Contribute to the overall success of the NLF team. Support work tasks as needed, including resolving corrective actions. Provide training related to quality assurance requirements. Submit updates into Trackwise. Support some classified work in 240D, as required. Education and Experience Requirements Baccalaureate degree in Engineering or Physical Science field. Five (5) years of experience in nuclear operations quality assurance. At Spectra Tech, Inc., our recruitment team is powered by real people in real time-personally reviewing every application with care and integrity. We take pride in identifying and recruiting top-tier talent while maintaining full alignment with federal regulations, EEOC standards, and fair hiring practices that reflect our commitment to excellence and equity Spectra Tech, Inc. is committed to hiring and retaining a diverse workforce. We are an Equal Employment Opportunity (EEO) employer. It is the policy of the Company to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. We are also an E-verify employer. (function () { 'use strict'; social Share.init(); })();

FLSA Status: Exempt Primary Job Function The Quality Assurance Manager is lead person for the IMC Quality Management System (QMS), giving daily direction to quality personnel concerning quality related issues vs. production scheduling, inspection and testing. Works with customer on quality issues keeping the key managers in the loop on customer perceptions of IMC. Assists in setup and analysis of quality metrics, quality product reviews and new product development documentation. Reports quality performance metrics to all functions of the organization. Essential Duties and Responsibilities Delegates various aspects of the system to others but retains the overall responsibility and accountability for the QMS Ensures that the quality system is kept current Provides periodic assessment of the effectiveness of the system Reports to the Management Team on the status of the QMS. This review is composed of several measures, including the results of internal quality system audits. Recommends strategies to the Management Team for meeting quality objectives Monitors the effectiveness of the quality system through suitable audits on systems and suppliers and analysis of corrective actions. Oversees the inspection and calibration department Administers and leads the corrective action function Administers the nonconforming material procedure and leads the Material Review Board (MRB). Conducts or delegates quality system training for all employees Communicates the importance of customer requirements to all functions of the organization Follows established safety protocols including required usage of PPE; helps to maintain a safe working environment. Keeps work area clean and organized Performs other duties as assigned Supervisory Responsibilities Supervises the calibration, inspection and document control functions Serves as a coach and trainer for all employees in matters relating to the quality system Supervises Quality department employees Qualifications Minimum Qualifications and Experience Minimum skills, knowledge, education, certifications and related job experience that employee typically must have to perform essential functions of the job acceptably: Five or more years of experience in quality related positions; 10 or more years of metal industry experience. Bachelor's degree in relevant field preferred ISO 9001: 2015 experience (1 year) highly preferred Basic knowledge of Quality Management Systems Competent in the usage of Word, Excel and other software programs needed to effectively analyze and effectively communicate for the requirements of the position. Three or more years of experience performing quality audits Strong math and measurement skills Knowledge of and ability to use measuring tools, tape measure and calculator Strong attention to detail Dependability; honesty & integrity; a positive, proactive attitude; ability to use time productively, working with minimal supervision both individually and as part of a team. Ability to work overtime as required Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to: (a) stand (up to 8 hours per shift), (b) walk, (c) use hands to touch, (d) reach with hands and arms, (e) climb or balance, (f) stoop, (g) kneel, crouch, or crawl, and (h) and talk or hear. The employee must frequently lift and/or move up to 50 pounds Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. May be exposed to noise, dust, fumes, airborne particles, smoke and temperature extremes within OSHA Permissible Exposure Levels.

Lab Technical Operations Specialist Duration: 12 Months+ Shift: 1st Shift Pay range $25-$30/hr on w2 We are looking for a motivated Lab Technical Operations Specialist to join our Manufacturing Science and Technology (MSAT) team. This role is critical for advancing our CAR-T and PSC process development and requires expertise in cell culture and strong data management skills. Key Responsibilities The primary focus of this role involves hands-on laboratory work and meticulous data management. CAR-T Cell Processing: Execute the ADA CAR-T process on donor materials, requiring proven experience in laboratory cell culture techniques. Support process improvement and characterization studies for allogeneic CAR-T processes. Pluripotent Stem Cell Processing (PSC): Culture, maintain, and differentiate PSCs, specifically hESCs Culture Retinal Pigmented Epithelial (RPE) cells, in both 2D tissue culture flasks and 3D stirred tank bioreactors. Support process improvement and characterization studies for PSC and RPE processes. Documentation and Data Management: Thoroughly document experiments in the Benchling electronic laboratory notebook (ELN), adhering strictly to Good Documentation Practices (GDP). Perform review and approval of completed experiments within the Benchling ELN. Manage in-process and analytical data by accurately transcribing data from various sources into a central data tool. Verify data accuracy during transcription and perform process monitoring to identify potential trends. Assist with analyzing data and preparation of experimental protocols, reports, and presentations. Logistics and Coordination: Manage process materials and inventory by collaborating with procurement, warehouse, and Vendor Managed Inventory (VMI) personnel. Maintain appropriate material stock levels. Coordinate the shipping of laboratory samples to various internal and external teams across the network and third-party testing partners. Qualifications and Experience Experience in laboratory cell culture is required for execution of the CAR-T, PSC, and RPE process. Demonstrated proficiency with electronic laboratory notebooks (ELNs), preferably Benchling. Strong understanding of Good Documentation Practices (GDP). Excellent data entry and data verification skills, with an eye for detail and trend identification. Experience or comfort collaborating with cross-functional teams (e.g., procurement, logistics). Ability to manage complex logistics, including sample coordination and shipping.

🚀 Now Hiring: Quality Validation Specialist / Engineer 🏭 About the Role We are seeking an experienced Quality Validation Specialist / Engineer to support a drug product and finished goods manufacturing organization responsible for delivering commercial and pipeline products. This role provides critical quality oversight to ensure manufacturing systems and processes remain compliant, validated, and inspection-ready. 🔍 What You'll Do ✅ Provide quality oversight for site qualification and validation programs ⚙️ Support qualification and validation of equipment, facilities, and utility systems 💻 Oversee validation of GMP computerized systems 🧪 Provide quality oversight for drug product manufacturing, cleaning, sterilization, and analytical methods 📋 Guide internal teams on best practices for compliant and reproducible validation execution 🔄 Review and approve changes impacting the validated state and/or requiring qualification or validation 📝 Review and approve validation documentation in alignment with quality system requirements ⚠️ Provide oversight and input on qualification/validation deviations and exceptions 📊 Analyze complex issues requiring evaluation of multiple variables and cross-functional impact 🤝 Collaborate with cross-functional teams and exercise sound technical and quality judgment 👩 🔬 Who You Are 🎓 Bachelor's degree with 5-10 years of relevant industry experience, or equivalent qualifications 🏥 Experience in the biopharmaceutical or pharmaceutical industry in technical or quality validation 📘 Strong knowledge of qualification and validation principles 📏 Ability to interpret and apply quality standards and regulatory requirements 🧠 Strong decision-making skills related to quality and technical topics 📜 Solid understanding of cGMP or equivalent regulations ⏰ Flexible in problem-solving approach and work hours to meet business objectives 🤝 Strong collaboration skills with the ability to quickly build rapport with team members

Want to do meaningful work that will leave a lasting impact in our community? Benton County is currently in search of a Developmental Diversity Quality Assurance Coordinator to join our team! We are looking for a Quality Assurance coordinator to serve a variety of essential functions which may include support of children and family services, filing and documentation, billing and financial management, protective services, as well as investigations regarding abuse and neglect. We are looking for someone with good customer service skills to work in a busy and diverse office providing supports for people identified with intellectual and developmental disabilities. Good written and interpersonal communication skills are important. Click here for a complete list of the duties, responsibilities and physical requirements of this position. The first review of applications will be 1/22/26 Applications submitted after this date may or may not be considered. This listing may close at any time after the first review date. BENEFITS * Generous time off to maintain a healthy work-life balance! * 11 Paid Holidays + 2 Floating Holidays + 8 hours of vacation accrual every month + sick leave! Vacation accrual increases with years of service. * $0 Health Insurance Premium! * Medical, Dental and Vision -cover your eligible family members without additional premium. * In addition, the County contributes up to $1,900 per year to your Health Savings or Health Reimbursement account, depending on plan and personal contribution! * Apart from your deductible you can use this money for things that aren't traditionally paid by insurance - i.e. Ibuprofen, Tylenol and other preventative type medications * You never lose your Health Savings Account funds as it rolls over from year to year * Dependents up to age 26 are covered! * Get ready for retirement. Generous employer paid contributions! * After 6 months of employment: * The County makes a retirement contribution of 6% of your salary towards Oregon PERS! * The County makes a deferred compensation 457b plan contribution of 1.5% of your salary! You can add more if you wish. * A free and award-winning wellness program * Interactive and personalized approach focused on your whole health. * Onsite and virtual seminars, wellness challenges and fun activities. * Monetary incentives and cool prizes to engage everyone and meet your individual needs! * 100% employer-paid coverage for AD&D ($100,000), Life ($50,000), and Long Term Disability coverage. * Supplemental plans are available at reasonable rates! * Annual salary range of: * $65,566.63 - $94,774.96 * This position is eligible for two salary raises within your first year as long as your performance is in good standing! * Note: salary placement will be based on your level of directly related experience and education consistent with Oregon's pay equity law. * Have benefits questions? * Reach out to us anytime: ***************************** MINIMUM QUALIFICATIONS The following minimum qualifications are REQUIRED for this position: * Bachelor's degree from an accredited college or university in health and human services, social sciences, humanities, social work, psychology, education, ethnic studies, public health, or other related fields; AND * 1 year of experience in human services, social services, diverse populations, or other related field. An equivalent combination of education and experience may be accepted. Please note candidates must have at least 6 months of actual work experience to be considered as equivalent. Special Requirements * Hiring is contingent upon the successful completion of a background check. The Ideal Candidate * Bilingual English/ Spanish preferred * Well-developed critical thinking and organizational skills, and take initiative * Strong communication and interpersonal skills * Dependable, invested, focused, and is able to effectively collaborate with the team * Shows care and compassion to the population served * Problem-solves through complex tasks while using creativity, flexibility, and adaptability * Has the capacity to learn and grow * Has a strong commitment to equity Please ensure you have provided a thorough and updated application as it pertains to the position for which you are applying. Your application materials will be used to determine salary based on a pay equity assessment. For further information, please click on the link: Oregon Pay Equity Law Questions regarding this position can be directed to Dawn Harbach; Team Coordinator Benton County Health Services Telephone: ************** ******************************* Working at Benton County Living in Benton County How to Apply * To apply for this position, click on the "Apply" button to fill out all information in the online application and complete the questionnaire. Failure to do so may result in your application being removed from consideration. * Only complete applications received by the posted application deadline date, or the first review date will be considered. * Answer all supplemental questions. After you Apply * You will get an email stating your application has been submitted. Log in to your NeoGov account before the job announcement closes to see if you have any pending tasks or notifications, and make sure to complete these tasks before the job announcement closes. These can be found under the "My Applications" section. * Be sure to check both your email and NeoGov account for updates regarding this recruitment. Additional information * This is a FLSA exempt position. * This position is represented by the American Federation of State, County and Municipal Employees (AFSCME). * Hiring is contingent upon the successful completion of a background check. * Please save a copy of this job announcement for your reference, as it may not be available for you to view after the job closes. * Eligible veterans who meet the qualifications will be given veterans' preference. For further information, please see the following website: Veterans Resources. NOTE: If claiming veterans' preference please be sure to attach your DD214 or Disability letter from the VA. * Benton County does not offer VISA sponsorships. Within three days of hire, you will be required to complete the US Department of Homeland Security's I-9 form confirming authorization to work in the United States. Benton County will review these documents to confirm that you are authorized to work in the United States. * If you wish to identify yourself as an individual with a disability under the Americans with Disabilities Act of 1990 and will be requesting accommodation, please contact the Benton County Human Resources Department by calling ************. Benton County is an equal opportunity employer. Helpful links and contact information Learn more about Benton County Understanding the County Application Process Job Interest Cards webpage For more information you may contact us by e-mail at ***************************** or by phone at ************.

Crane Aerospace and Electronics has an exciting opportunity for a Quality Manager at our West Caldwell, NJ location. About Crane: Crane Aerospace & Electronics supplies critical systems and components to the aerospace and defense markets. You'll find Crane Aerospace & Electronics in some of the toughest environments: from engines to landing gear; from satellites to medical implants and from missiles to unmanned aerial systems (UAS). Every time you use phone navigation, make a bank transaction or have food delivered to your home, Crane Aerospace & Electronics Microwave product is hard at work. Located in the tight-knit, family-first West Caldwell, NJ., community, our West Caldwell facility supplies industry-leading microwave components and systems for use in space, defense and commercial applications, including GPS III satellites. With more than 60 years of expertise, our Microwave group has proven capabilities in major military, communications, electronic warfare, radar and satellite systems. Start the next chapter of your career with Crane Aerospace & Electronics! Job Summary: The Quality Manger is responsible for establishing, implementing and directing quality assurance efforts to ensure components and other materials in finished goods and products conform to quality standards based on the requirements and expectations of the organization and customer. Essential Functions: • Management, training and mentoring of all Quality Department employees at site level • Lead problem solving Kaizen events • Manage budget, costs and expenditures within the Quality function and applicable functional support requirement. • Responsible for investigation of and formal response to all customer complaints(SCARS) • Responsible for failure analysis & corrective action reporting system(FRACAS) • Participate in internal and external quality audits • Any other task assigned by your supervisor or management Minimum Qualifications: • Experience: 5+ years Quality assurance experience in the defense, space electronics or high end aerospace industry in either a management role or senior quality engineering position; Experience with Lean and Six Sigma methodologies • Knowledge: Expert knowledge of Quality Management Systems as well as Process Improvement and Control Techniques; Demonstrated knowledge of manufacturing best practices, process control (SPC, Six Sigma), logistics processes (inventory management), engineering management (project management) and safety management • Skills/Abililties: Demonstrated strong analytical and problem solving skills; Effective written and verbal communication skills and interpersonal skills; Ability to manage through influence; Abilty to demonstrate a strong sense of urgency • Education/Certification: B.S. degree in electrical or mechanical engineering, or related field Preferred Qualifications: • Certified ISO/AS lead assessor credentials Working Conditions: • Standard office environment • Work requires substantial visual concentration on detail • Working conditions are normal for a manufacturing environment • Manufacturing operations may require the use of safety equipment to include but not limited to: eye safety glasses, gowning, masks, hearing protectors, heel/wrist straps and any other required PPE • May be exposed to unusual environmental conditions such as loud noises, cold temperatures, confined spaces, dust or fumes • Travel up to 10% may be required Standing: 30% *percentage is approximate and may vary depending on work task Sitting: 70% *percentage is approximate and may vary depending on work task Lifting (in pounds): up to 25 pounds Pushing (in pounds): up to 25 pounds Mental/Visual: use of computer, calculator, filing cabinets Workspace: cubicle/desk Crane Co. reserves the right to change or assign other duties to this position. The statements contained herein reflect general details as necessary to describe the principal functions of this job, the level of knowledge and skill typically required and the scope of accountability and responsibility. These descriptions should not be considered to be all-inclusive listings of work requirements. Crane Co. is an Equal Opportunity Employer and does not discriminate on the basis of race, color, creed, religion, sex, national origin, marital status, age, sexual orientation, gender identity characteristics or expression, physical or mental disability, pregnancy, medical condition, genetic information, or U.S. military or veteran status or any other characteristic protected under federal, state, or applicable local law, in recruiting, hiring, training and promoting Salary range: $132,020.70 - $162,894.20. Several factors contribute to actual salary, including experience in a similar role or performing comparable job responsibilities, skills, training, and other qualifications. Some roles may be eligible for participation in performance-based bonus programs. This description has been designed to indicate the general nature and level of work being performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. Crane Company. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, gender, sexual orientation, general identity, national origin, disability or veteran status.

Job DescriptionThe Director of Commercial Quality Assurance plays an integral role in fostering a culture of quality, efficiency, and excellence, ensuring that quality and compliance are integrated into the day-to-day operations and long-term Quality strategy. The focus of this position will be to support the Commercial Manufacturing Facility that is currently underway, giving the selected candidate to truly be a visionary leader in the development and implementation of the Commercial Quality Assurance program. This position will provide strategic direction and guidance for the Quality Assurance functions to assure end-to-end harmonization of quality processes including risk and GMP core management, and regulatory compliance with worldwide requirements. The position is also responsible for ensuring that Quality operates in compliance within internal quality system procedures, mitigation of identified compliance and quality risks throughout product life cycle from development to commercialization for the products manufactured at Serán BioScience. Duties and Responsibilities Identifies and eliminates risk to continuously improve customer satisfaction and product reliability Leads and steers Quality Assurance (QA) Department, including hires and mentors QA personnel, provides constructive and timely performance evaluations, and handles discipline of employees in accordance with company policy Leads implementation and continuous improvement of the company's quality systems and facility validation Creates product quality documentation system by writing and updating quality assurance procedures Leads Quality System improvements, Investigations, CAPAs, Change Management, Document Control, Validation, and Auditing Responsible for oversight of site activities, assuring that products are manufactured in compliance with cGMP, FDA, and EU guidelines Documents authorship, reviews, and approves of SOPs, batch production and quality control (QC) records, certificates of analysis, method validations, and equipment qualifications Supports internal audits, client audits and regulatory inspections Provides support and oversight of Quality Management Review meetings Oversight of a broad range of documentation including, but not limited to User Requirements Specifications (URS), Functional and Design Specifications, Testing Protocols (IQ/OQ/PQ), Change Controls, and Risk Assessments Maintains product quality by enforcing quality assurance policies and procedures and government requirements Collaborates with other members of management to develop new product and engineering designs and manufacturing and training methods Prepares product and process quality reports by collecting, analyzing, and summarizing information and trends Defines and maintains a strong people management, training, and engagement culture to ensure a high and constantly improving right first-time rate in manufacturing and QC Manages the QA budget to ensure that resources are allocated appropriately and that all projects are completed on time and within budget Responsibilities may increase in scope to align with company initiatives Other related duties as assigned Required Skills and Abilities General knowledge of aseptic manufacturing processes Expert knowledge of GMP guidelines and Quality expectations for preclinical and clinical phase programs In-depth understanding and application of cGMP principles, concepts, practices, and standards Experience with regulatory inspections by the FDA and EU authorities Ability to influence diverse stakeholders and drive accountability and decision-making cross functionally Demonstrated ability to partner with other functional groups to achieve business objectives Broad knowledge of FDA and international regulations related to GMPs and Pharmaceuticals Experience organizing and managing work responsibilities while working independently with minimal oversight Time and project management skills with the ability to multi-task and meet deadlines Excellent verbal and written communication skills Excellent organizational skills and attention to detail Communicates effectively and maintains productive relationships with coworkers, clients, and other contacts outside of the company Accepts feedback from a variety of sources and constructively manages conflict Strong analytical and problem-solving skills Proven ability to lead organizations Ability to prioritize tasks and to delegate when appropriate Proficient with Microsoft Office Suite or related software Education and Experience Bachelor's degree in a scientific discipline; advanced degree is preferred. Requires a minimum of 10 years of GMP and Quality experience in the Pharmaceutical or Biotechnology industry Requires a minimum of 5 years in a QA management role Physical Requirements Prolonged periods of sitting or standing at a desk and working on a computer Must be able to lift up to 15 pounds at a time Adheres to consistent and predictable in-person attendance Visit ******************************** to learn more about company culture and the community of Bend, Oregon. Applicants must be authorized to work for an employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. Benefits Summary:Serán employees accrue over four weeks of paid time off annually. Employer contributions to a retirement account begin after 90 days and do not require an employee match or vesting period. Various health plans allow employees to find the best coverage for their individual or family needs with minimal employee contributions. Serán covers each employee with basic life and long-term disability, giving access to increase or add coverage. An Employee Assistance Program provides support for all things related to our employees' wellbeing, along with access to pet insurance. The Corporate Headquarters of Serán BioScience are located at 63047 Layton Ave, Bend, OR 97701 We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Why E2 Optics? 🔌 Join Our Team as a QA/QC Coordinator at E2 Optics! 🔌 Are you ready to elevate your career with an award-winning, Woman-Owned technology integrator that's leading the charge in the data center revolution? E2 Optics is one of the fastest-growing and most stable companies at the core of the tech industry-powering the infrastructure behind AI, cloud computing, and the innovations of tomorrow. At E2 Optics, you will work with cutting-edge systems in some of the most advanced environments in the world. We invest in your growth through hands-on experience, industry certifications, and leadership opportunities that put you in charge of teams and outcomes. Collaboration is in our DNA-we believe in lifting each other up, mentoring with purpose, and celebrating every win. If you're looking to be part of something meaningful, fast-moving, and future-focused, your next opportunity is here. Join one of America's largest and fastest-growing tech integrators and help us shape what's next. What You'll Do Safety is E2 Optics' number one Core Value. All employees are expected to follow safe work practices, as well as adhere to company and client worksite safety policies and procedures. Quality Assurance: Develop and execute the E2 Optics Quality Management System (QMS) for every project. Collaboration: Partner with internal and external stakeholders to ensure adherence to quality standards. Inspections & Reporting: Conduct quality inspections, generate data analytics, and track nonconformance reports. Continuous Improvement: Drive Lean initiatives and contribute to the success of quality-driven projects. Training & Coaching: Train internal teams on quality standards and procedures. What We Are Looking For High school diploma or GED required. 2+ years of field experience with structured cabling or data center cabling installations. Experience with fiber installation and testing. Strong communication and coaching abilities. Analytical, decision-making, and problem-solving skills. Proficient in Microsoft Office (Outlook, Word, Excel). Ability to work under pressure while maintaining a positive, detail-oriented approach. Experience with technical writing and developing QA/QC procedures is a plus. What We Offer Competitive pay Opportunities for professional development and career growth BICSI training facilities A supportive and inclusive work environment Health, dental, and vision insurance Paid time off and holidays Work Environment and Physical Demands The standard work environment for this position is an indoors business office and construction environment. The noise level in the work environment is usually moderate. While performing the duties of this job, the employee is regularly required to sit, talk or hear, use hands, stoop, kneel, reach with hands and arms, and talk or hear. The employee is frequently required to stand and walk. The employee must regularly lift and/or move up to 50 pounds and frequently lift and/or move up to 25 pounds. The employee must regularly carry and climb ladders to 20 feet. Must be able to operate equipment such as scissor lifts, telehandlers, boom lifts, and UTVs (buggies) if required to do so. The employee may also be required to work in tight, confined spaces. The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. When possible, reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Disclaimer The above job definition information has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. Job duties and responsibilities are subject to change based on changing business needs and conditions.

We Are: Are you ready to step into the heart of digital transformation in one of the world's most critical - and most dynamic - industries? The Chemicals Industry is evolving at lightspeed: demand for sustainability-driven products is on the rise. At the same time, digital platforms, real-time analytics, AI, and SAP-enabled processes are no longer "nice to have" - they are foundational. As part of Accenture's SAP Chemical's Practice, you'll be delivering major SAP engagements (for example, Business Transformation Strategy & Roadmaps, migrations to SAP S/4HANA, process standardization, cloud-enablement) that help clients win in this new environment and guide major Chemical clients through the journey of business-model reinvention, process excellence and enterprise technology enablement You Are: Do you have a passion for storytelling and for originating, selling and delivering SAP-based Supply Chain Transformation projects that make a positive impact in your clients' business? Are you inspired by working with the best companies in their industries? Want a role that provides you with a sense of purpose and satisfaction? Then join Accenture and build a rewarding career improving the way the world works and lives, as you help clients innovate with leading-edge SAP and Accenture Supply Chain solutions and technologies on some of the most innovative projects in the world You will thrive in our highly collaborative, digitally-driven and innovation-led environment while nurturing your talent for thoughtful and game changing solutions in our inclusive culture that values diversity of ideas, experiences and backgrounds. Ultimately, you are a confident manager who spots and stays ahead of the SAP platform, industry and Supply Chain trends and knows how to translate client goals into clear and actionable outcomes that everyone can get behind. You know how to fully utilize the capabilities of various SAP platforms to drive business value, transform end-to-end functions and drive leading practices for your clients in markets all over the globe. The more complex their challenges, the more excited you are about leading the charge to solve them. The Work: Team with clients on their SAP functional transformation programs through your combined SAP application and functional process expertise which includes your ability to: + Engage with client executives on the business challenges/trends and the potential value of SAP solutions (current & future) + Lead customers in defining their SAP journey through the development of business cases & roadmaps including during sales origination, proposal development and client presentations + Architect E2E solutions that leverage SAP technologies, custom apps, & add on partner solutions + Advise, design and deliver solutions based on the latest industry and technology best practices leveraging a SAP solutions and embedded innovation. + Lead small teams - helping them achieve transformational roadmaps - onsite with clients or within Accenture + Become a trusted expert and advisor to your clients, team, and Accenture Leadership by staying current on regulations, trends, and innovations across your area of expertise + Be a thought leader, build assets and best practices and develop the next level of transformation experts Travel may be required for this role. The amount of travel will vary from 0 to 100% depending on business need and client requirements Here's what you need: + Minimum of 5 years of SAP functional and technical experience/expertise in Quality Management and/or Manufacturing. + Minimum 3 years of experience in SAP projects supporting Chemicals clients. (SAP support / managed services experience will not be considered for this requirement) + Minimum 2 end-to-end SAP S/4 implementations, including project planning, estimation and solution architecture for Chemicals clients + Experience managing SAP delivery teams, in a Global Delivery Model, including but not limited to the following responsibilities: driving complex workshops and leading design decisions, as well as leading the design and execution of system build, configuration, testing, cutover, and go-live in the SAP Transportation Management or Quality Management area + Prior experience in a Consulting and/or Advisory role + Bachelor's degree or equivalent (minimum 12 years' work experience). If Associate's Degree, must have equivalent minimum 6-year work experience Compensation at Accenture varies depending on a wide array of factors, which may include but are not limited to the specific office location, role, skill set, and level of experience. As required by local law, Accenture provides a reasonable range of compensation for roles that may be hired as set forth below. We accept applications on an on-going basis and there is no fixed deadline to apply. Information on benefits is here. (************************************************************ Role Location Annual Salary Range California $94,400 to $293,800 Cleveland $87,400 to $235,000 Colorado $94,400 to $253,800 District of Columbia $100,500 to $270,300 Illinois $87,400 to $253,800 Maryland $94,400 to $253,800 Massachusetts $94,400 to $270,300 Minnesota $94,400 to $253,800 New York/New Jersey $87,400 to $293,800 Washington $100,500 to $270,300 Requesting an Accommodation Accenture is committed to providing equal employment opportunities for persons with disabilities or religious observances, including reasonable accommodation when needed. If you are hired by Accenture and require accommodation to perform the essential functions of your role, you will be asked to participate in our reasonable accommodation process. Accommodations made to facilitate the recruiting process are not a guarantee of future or continued accommodations once hired. If you would like to be considered for employment opportunities with Accenture and have accommodation needs such as for a disability or religious observance, please call us toll free at **************** or send us an email or speak with your recruiter. Equal Employment Opportunity Statement We believe that no one should be discriminated against because of their differences. All employment decisions shall be made without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by federal, state, or local law. Our rich diversity makes us more innovative, more competitive, and more creative, which helps us better serve our clients and our communities. For details, view a copy of the Accenture Equal Opportunity Statement (******************************************************************************************************************************************** Accenture is an EEO and Affirmative Action Employer of Veterans/Individuals with Disabilities. Accenture is committed to providing veteran employment opportunities to our service men and women. Other Employment Statements Applicants for employment in the US must have work authorization that does not now or in the future require sponsorship of a visa for employment authorization in the United States. Candidates who are currently employed by a client of Accenture or an affiliated Accenture business may not be eligible for consideration. Job candidates will not be obligated to disclose sealed or expunged records of conviction or arrest as part of the hiring process. Further, at Accenture a criminal conviction history is not an absolute bar to employment. The Company will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. Additionally, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the Company's legal duty to furnish information. California requires additional notifications for applicants and employees. If you are a California resident, live in or plan to work from Los Angeles County upon being hired for this position, please click here for additional important information. Please read Accenture's Recruiting and Hiring Statement for more information on how we process your data during the Recruiting and Hiring process.

Job Description This position directs the day-to-day function of the Quality Assurance Department to ensure the Orenco products (Commercial and residential treatment systems, Control Panels) meet or exceed customers' requirements. This position interfaces with manufacturing personnel to develop, implement, and monitor procedures and Work Instructions to ensure product quality for internal and external customers. This position is responsible for directing Quality Analysts and quality auditors in support of manufacturing operations. The focus of this position is the reduction of variation and ensuring acceptable outgoing quality levels. Works within ISO 9001 standards to accomplish the established quality objectives. Leads cross functional Six Sigma teams to continuously improve product quality and implement permanent root cause corrective actions. CORE RESPONSIBILITIES: Develop, measure, and report internal and external product quality manufacturing performance metrics. Develop and maintain direct report objectives to monitor the effectiveness of assigned responsibilities. Oversee incoming inspection and testing of materials, components and finished products. Validate final inspection checks on completed control panels, High Voltage, functional testing, label verification. Ensure all test reports, inspection records are complete and traceable to each panel's serial number. Ensure the Product Quality Plans are fully implemented, and the Quality Standards are fully defined and implemented to detect defect early (Wiring errors, Torque settings, cable routing) Lead, investigate and Resolve product quality issues, analyze data, and maintain the integrity of the quality systems. Implement corrective action plan. Prepare for and manage external audits. Utilize measurement data to develop a continuous improvement quality action plan with a clear definition of objectives and associated actions with timelines. Resolve quality issues through Define, Measure, Analyze, Implement and Control (DMAIC) six-sigma methods, and continuous improvement methodology. Lead and/or participate in scrap reduction activities. Create Work Instructions (WIs) for availability, accuracy and communicating work methods for production and testing. Audit the processes and procedures to ensure compliance to world-class practices. Perform statistical analysis for requested projects, providing recommended actions based upon the data. Manage, train and mentor subordinate employees between engineers and inspectors as necessary. Ensure panels and related electrical assemblies meet safety, performance and compliance standards such as IEC, UL, CE. Ensure calibration and maintenance of testing instruments. Safety/Culture Continuously maintains Orenco management's safety, cultural, and professional standards. Promotes, encourages, and reinforces a positive safety culture, safe practices, and a safe work environment to all employees. Work to be done during manufacturing business hours, which may include an occasional early and/or later shift as needed. However, this position may on occasion work outside business hours to support department needs. Occasional long hours may be required. Regular, consistent, and predictable attendance is required. Performs other duties as assigned. EXPERIENCE, EDUCATIONAL, AND TECHNICAL QUALIFICATIONS: Mechanical, Electrical, Electronic Engineer, Bachelor's degree from a four-year college or university Minimum of 7 years' experience in quality, 3 years minimum in quality management role Knowledgeable of standard UL 508A Knowledgeable of polymer testing Experience with root cause analysis, statical analysis and process improvement methodologies. Company Benefits: Health & Welfare Benefits: Medical and prescription drug plans, telemedicine (with medical plan), High-Deductible Health Plan (HDHP) and Health Savings Account (HSA), dental and vision plans, virtual physical therapy*, an employee assistance program (EAP)*, and voluntary accident, critical illness, and hospital indemnification programs. Financial Benefits: Retirement 401k program with company match, an employee stock purchase plan (voluntary), financial wellness planning*, paid parental leave*, flexible spending accounts (FSA) for child care and health care, short-term and long-term disability*, basic life insurance, accidental death and dismemberment (AD&D)*, adoption financial reimbursement*, tuition reimbursement*, voluntary life insurance (for employees, spouses, and children), and voluntary identity theft and fraud protection. *100% paid by ADS. WORKING CONDITIONS: Primarily indoor office environment. Travel requirements may include operation of a motor vehicle, airplane travel, and overnight stays in temporary lodging. Requires the ability to visit project sites that are situated on a variety of developed and undeveloped terrain/locations. Includes exposure to outside weather conditions when at customer sites. Conducting field work may include occasional exposure to wastewater, requiring proper use of personal protective equipment including but not limited to gloves. PHYSICAL REQUIREMENTS: Regular job duties include seeing, speaking, hearing, reading, writing, keyboarding, prolonged periods of sitting including extended time viewing a computer screen. Intermittent physical activity including standing, walking, climbing stairs and/or ladders, reaching, pushing, pulling, grasping, holding, bending, twisting, stooping, kneeling, squatting, driving, and occasional light lifting of under 20 lbs. May also include occasional unassisted lifting of up to 50 lbs., occasionally up to 70 lbs. Lifting over 70 lbs. must be assisted. Operation of a motor vehicle and airplane travel with the ability to visit project sites that are situated on a variety of developed and undeveloped terrain/locations, is and/or may be required. EEO Statement ADS supports an inclusive workplace that values diversity of thought, experience, and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. ADS is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law.

Job DescriptionCement Quality Control Manager Pay/Salary Range: $140-180,000 Full-Time, Onsite Direct HireLead cement laboratory excellence in a company known for its commitment to quality, safety, and innovation in the cement and concrete industry! As Quality Assurance Manager, you will oversee cement laboratory operations across the Northwest, ensuring that industry-leading standards are met while supporting a team dedicated to delivering superior customer service. This role offers excellent opportunity for growth, great for someone ready to take the next step in their lab services career! Bring your cement expertise to an organization that values employee growth, continuous improvement, and environmental responsibility - apply now! What You'll Do Lead and coordinate daily lab functions, guaranteeing compliance with AMRL/CCRL cement and concrete testing protocols Manage scheduling, training, and oversight of lab and field technicians to deliver consistent, high-quality testing services Maintain lab equipment calibration schedules and oversee procedural manuals and certifications Monitor cement quality data and conduct trial mixes and specific performance tests according to industry standards Act as the technical liaison with public agencies, contractors, and internal teams to align on specifications, quality issues, and emerging opportunities Provide technical coaching and updates to sales and operational teams, ensuring top-notch customer support Engage regularly with quality control teams at cement plants and represent the company at relevant meetings and technical associations Travel throughout the Pacific Northwest and Western Canada to support client needs and cement distribution points What You'll Bring 7+ years' technical service experience within cement, concrete, or construction materials industries, including supervisory experience Bachelor's in Civil Engineering or Concrete Management preferred Experience working with public entities a plus Strong communication and presentation skills - you can influence, educate, and collaborate across multiple groups Solid understanding of cement and concrete manufacturing, chemistry, and performance characteristics Skilled with math, analytical, and organizational skills with attention to detail Drive to grow into a Director role Ability to travel throughout the PNW Why You'll Love This Role Competitive, comprehensive health benefits including medical, dental, and vision coverage Company-paid life insurance and disability coverage Retirement program with employer contributions Employee assistance program to support you and your family Great opportunities for growth Wide range of voluntary benefits to fit your lifestyle Ready to make a lasting impact? Apply now or call Aileen at ************ for more details. Copy this link to share this opportunity! Dynamic's benefits and leave programs for Temporary and Temp to Hire Associates are provided in our employee handbook and are reviewed during onboarding and follow state, local and federal laws. Eligibility and accrual rates may vary based on work location and employment status. Dynamic provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job DescriptionThe mission for this position is to support the Quality Department through additional oversight of lab personnel, batch paperwork review and data entry, cross-training, and coordinating and assisting with special projects to ensure timely completion of all department goals. The right person for this role will understand food processing and have experience meeting food safety and quality requirements. This is a critical role, requiring working cross-functionally with multiple teams. Responsibilities Communicate with leadership teams and personnel regarding product compliance to food safety and quality requirements and specifications. Manage all lab staff, including hiring, scheduling, and performance reviews. Position scorecards will list all performance indicators. Assist in Incident Response and ON HOLD programs to document investigations. Verify batch paperwork daily, and report quality concerns to appropriate personnel. Responsible for follow-up with technicians on deficiencies and reporting those deficiencies to the Lab Supervisors and QA Manager. Maintain and audit incident, on hold and positive release registers. Maintenance and data entry into quality databases and files. Review physical grade sheets of cans for accuracy and enter into Positive Release if product is within specification. Review physical samples with potential deficiencies and report findings as appropriate. Meet regularly with lab Supervisors to provide training and feedback, assist with issues on shift, and assist Supervisors in bringing problems to Management attention. Work with lab Supervisors to develop and oversee weekly lab training programs. Be able to perform all job duties of a lab technician or lab supervisor to fill in the lab when necessary. Cross-train in the microbiology lab to learn all skills associated with the position. Assist with any other project as assigned by QC Management. Perform other duties as assigned. This position has been identified as holding responsibility for food safety and the quality of the company. This responsibility extends over all shifts. Minimum Qualifications Bachelor of Science in Microbiology, Food Science, Ag Science or related field. PCQI certification within 6 months of hire. Must be a team oriented strong problem solver, able to create solutions to challenges in an expedient manner. The ability to multi-task and prioritize assignments is essential. Strong computer skills are important. Proficiency in understanding and use of personal computers, Excel, Word, e-mail, and 10-key skills required. Experience in food manufacturing, preferably in a Quality role. Spanish fluency strongly preferred. The statements made in any and all of the position postings are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed, as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. Stahlbush Island Farms, Inc is an equal opportunity employer, focused on the employment and advancement of all applicants and colleagues for employment and promotion without regard to race, color, ethnicity, religion, gender, pregnancy/childbirth, age, national origin, sexual orientation, gender identity or expression, disability, genetic information, citizenship, veteran or military status, marital or domestic partner status, or any other category protected by federal, state and/or local laws. Stahlbush Island Farms is an equal opportunity employer, program auxiliary aids and services are available upon request to individuals with disabilities. Powered by JazzHR nl5EcJT3m9

Descripción Puesto en Samtec, Inc Founded in 1976, Samtec is a leading global manufacturer of electronic interconnect solutions, generating $950 million in annual revenue. Our extensive product portfolio includes High-Speed Board-to-Board, High-Speed Cables, Optics for Mid-Board and Panel, Precision RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers drive innovation to optimize system performance and cost across all interconnect points, supported by a presence in 40+ international locations and products distributed in over 125 countries, ensuring exceptional customer service worldwide.Samtec is searching for a Cable Manufacturing Quality Manager is responsible for ensuring quality and continuous improvement are integrated into the development and manufacturing of Samtec's cable products.Essential Functions/Responsibilities: Implement robust quality systems in a highly complex manufacturing environment. Be accountable for the quality of Samtec's high-speed coaxial cable manufacturing and processes at our Oregon, Costa Rica, and other expansion cable manufacturing sites. Support manufacturing transfers of products/machines. Support resolution of downstream cable quality issues by managing and coordinating activities across Manufacturing Quality, Supplier Quality, Customer Quality, and Engineering organizations. Proactively engage in the product/process development and preproduction stages to ensure new products and processes are introduced with robust quality controls. Partner with Engineering and Operations leaders to form a cohesive team, ensuring adequate resource levels for a high quality, interrupt free manufacturing environment. Drive continuous improvement within operations through use of Six Sigma, lean manufacturing techniques, and consistent use of PFMEA and Production Control Plans. Customer Quality: Partner with Customer Quality Engineering (CQE) on identification of root cause of quality issues and execution of product quality improvements through preventive or corrective actions. Occasionally interface with customers for quality-related excursions, lead customer audits, and collect and summarize customer quality data to drive improvement. Direct Manufacturing Quality Engineering (MQE) in execution of investigations and improvement efforts. Supplier Quality: Partner with Supplier Quality Engineering (SQE) to perform supplier qualifications, monitoring, investigations, and audits to minimize quality risk from incoming materials. Ensure Quality engineering support for R&D, marketing, and operations for the development, modification, and qualification of new products and existing released products. Ensure proper documentation of processes exists and is being followed. Work to sustain and improve quality management systems of ISO-9001, IATF 16949, and others. ** The responsibilities as defined are intended to serve as a general guideline for this position. Associates may be asked to perform additional tasks depending on strengths and capabilities .** Required Experience: 5+ years' experience developing or manufacturing products involving extrusion or in-line electroplating processes, with use of SCADA systems and SI testing Minimum 3 years' experience in Quality Management Operations/Manufacturing Management is a must. Understanding of Lean Manufacturing concepts. Knowledge of ISO 9001 QMS Standard Preferred Experience: Quality certifications are desirable (Certified Quality Manager, Certified Quality Engineer, Certified Quality Auditor or related) Experience with cable extrusion, ribbonization, shielding (serve/braid) is desirable. Knowledge of other quality standards such as AS9100, ISO 13485, or IATF 16949 is preferred. Electronic industry experience or knowledge of IPC is highly desired. Education: Bachelor of Science in Engineering or related discipline required. About Samtec: Founded in 1976, Samtec is a privately held, $800 million global manufacturer of a broad line of electronic interconnect solutions. What drives us at Samtec is the knowledge that our products enable engineers to create great things. When we innovate electronics capable of moving signals at faster speeds, smaller footprints, and higher densities, we know that we're providing designers access to the technologies that they need to do the jobs that impact all our lives. Whether it's advanced medical equipment with the ability to save lives, energy-efficient products that make our living spaces more comfortable, communication products that bring us together, or any number of other innovations, we feel good about our part in making those things possible. With 40 locations in 20 countries, Samtec's global presence enables its unmatched customer service. SAMTEC, Inc. is an Equal Opportunity Employer and committed to creating a diverse environment. All employment decisions at Samtec are based in business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, pregnancy or parental status, age, disability, sexual orientation, gender and/or gender identity/expression, marital status, past or present military service, family medical history or genetic information, or any other status protected by applicable laws

at Samtec, Inc Founded in 1976, Samtec is a leading global manufacturer of electronic interconnect solutions, generating $950 million in annual revenue. Our extensive product portfolio includes High-Speed Board-to-Board, High-Speed Cables, Optics for Mid-Board and Panel, Precision RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers drive innovation to optimize system performance and cost across all interconnect points, supported by a presence in 40+ international locations and products distributed in over 125 countries, ensuring exceptional customer service worldwide.Samtec is searching for a Cable Manufacturing Quality Manager is responsible for ensuring quality and continuous improvement are integrated into the development and manufacturing of Samtec's cable products.Essential Functions/Responsibilities: Implement robust quality systems in a highly complex manufacturing environment. Be accountable for the quality of Samtec's high-speed coaxial cable manufacturing and processes at our Oregon, Costa Rica, and other expansion cable manufacturing sites. Support manufacturing transfers of products/machines. Support resolution of downstream cable quality issues by managing and coordinating activities across Manufacturing Quality, Supplier Quality, Customer Quality, and Engineering organizations. Proactively engage in the product/process development and preproduction stages to ensure new products and processes are introduced with robust quality controls. Partner with Engineering and Operations leaders to form a cohesive team, ensuring adequate resource levels for a high quality, interrupt free manufacturing environment. Drive continuous improvement within operations through use of Six Sigma, lean manufacturing techniques, and consistent use of PFMEA and Production Control Plans. Customer Quality: Partner with Customer Quality Engineering (CQE) on identification of root cause of quality issues and execution of product quality improvements through preventive or corrective actions. Occasionally interface with customers for quality-related excursions, lead customer audits, and collect and summarize customer quality data to drive improvement. Direct Manufacturing Quality Engineering (MQE) in execution of investigations and improvement efforts. Supplier Quality: Partner with Supplier Quality Engineering (SQE) to perform supplier qualifications, monitoring, investigations, and audits to minimize quality risk from incoming materials. Ensure Quality engineering support for R&D, marketing, and operations for the development, modification, and qualification of new products and existing released products. Ensure proper documentation of processes exists and is being followed. Work to sustain and improve quality management systems of ISO-9001, IATF 16949, and others. ** The responsibilities as defined are intended to serve as a general guideline for this position. Associates may be asked to perform additional tasks depending on strengths and capabilities .** Required Experience: 5+ years' experience developing or manufacturing products involving extrusion or in-line electroplating processes, with use of SCADA systems and SI testing Minimum 3 years' experience in Quality Management Operations/Manufacturing Management is a must. Understanding of Lean Manufacturing concepts. Knowledge of ISO 9001 QMS Standard Preferred Experience: Quality certifications are desirable (Certified Quality Manager, Certified Quality Engineer, Certified Quality Auditor or related) Experience with cable extrusion, ribbonization, shielding (serve/braid) is desirable. Knowledge of other quality standards such as AS9100, ISO 13485, or IATF 16949 is preferred. Electronic industry experience or knowledge of IPC is highly desired. Education: Bachelor of Science in Engineering or related discipline required. About Samtec: Founded in 1976, Samtec is a privately held, $800 million global manufacturer of a broad line of electronic interconnect solutions. What drives us at Samtec is the knowledge that our products enable engineers to create great things. When we innovate electronics capable of moving signals at faster speeds, smaller footprints, and higher densities, we know that we're providing designers access to the technologies that they need to do the jobs that impact all our lives. Whether it's advanced medical equipment with the ability to save lives, energy-efficient products that make our living spaces more comfortable, communication products that bring us together, or any number of other innovations, we feel good about our part in making those things possible. With 40 locations in 20 countries, Samtec's global presence enables its unmatched customer service. SAMTEC, Inc. is an Equal Opportunity Employer and committed to creating a diverse environment. All employment decisions at Samtec are based in business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, pregnancy or parental status, age, disability, sexual orientation, gender and/or gender identity/expression, marital status, past or present military service, family medical history or genetic information, or any other status protected by applicable laws SAMTEC, Inc. is an Equal Opportunity Employer and committed to creating a diverse environment. All employment decisions at Samtec are based in business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, pregnancy or parental status, age, disability, sexual orientation, gender and/or gender identity/expression, marital status, past or present military service, family medical history or genetic information, or any other status protected by applicable laws. Privacy Policy: *****************************************************

The Quality Control (QC) Manager is responsible for leading the day-to-day Quality Control operations that ensure products meet established specifications, food safety requirements, and regulatory standards. Reporting directly to the Quality Director, this role oversees in-process inspections, finished product testing, product holds and releases, and compliance documentation across all shifts. The QC Manager serves as the primary owner of execution-level quality control on the production floor, translating Quality and Food Safety systems into consistent daily practice. This position works closely with Operations, Sanitation, Maintenance, and the broader Quality team to identify issues early, drive root-cause analysis, and implement corrective actions that prevent recurrence. The QC Manager also leads and develops QC personnel while reinforcing GMP compliance and a strong quality culture. Responsibilities Quality Control Operations · Lead daily QC activities including in-process inspections, finished product inspections, sampling plans, and testing programs. · Manage product hold, release, and disposition processes to ensure compliance with specifications and food safety requirements · Verify adherence to formulas, specifications, labeling, and customer requirements · Maintain a strong on-floor presence to identify and address quality issues in real time Food Safety & GMP Compliance · Enforce Good Manufacturing Practices (GMPs), food safety protocols, and sanitation standards across all shifts. · Identify and escalate potential food safety risks immediately to the Quality Director · Support HACCP verification activities, Preventive Control monitoring, and food safety documentation. Nonconformance & Corrective Actions · Lead investigations into nonconforming product, process deviations, and quality failures. · Conduct root-cause analysis and partner with Operations and Sanitation to implement corrective and preventive actions. · Track corrective actions through completion and verify effectiveness. Testing, Documentation & Equipment · Oversee analytical, sensory, and visual testing activities to ensure accuracy, consistency, and reliability. · Ensure QC documentation is complete, accurate, and audit-ready, including batch records, inspection logs, and testing results. · Manage calibration, verification, and basic maintenance of QC and laboratory equipment. Team Leadership & Development · Lead, train, and develop QC Technicians and Inspectors across all shifts. · Manage staffing, onboarding, training, coaching, and performance evaluations. · Reinforce accountability, attention to detail, and adherence to quality standards Cross-Functional Collaboration · Partner with Operations to support efficient production while maintaining quality standards. · Coordinate with Sanitation to ensure cleaning, allergen controls, and environmental monitoring requirements are executed. · Support new product launches by executing QC plans, trials, and validation activities. · Communicate quality issues, trends, and metrics to the Quality Director Data & Continuous Improvement · Monitor QC data to identify trends, recurring issues, and improvement opportunities. · Support continuous improvement initiatives focused on defect reduction, first-pass quality, and waste reduction. · Participate in internal audits, customer audits, and third-party inspections as required. Other Responsibilities · Uphold all food safety and quality policies at all times. · Respond to quality concerns with urgency and professionalism. · Perform other duties as assigned. Requirements Education & Experience Bachelor's degree in Food Science, Biology, Chemistry, or related field; equivalent experience considered. 5+ years of experience in Quality Control or Quality Assurance within food manufacturing. Prior supervisory or lead experience required. Technical Skills Strong working knowledge of GMPs, HACCP principles, and food safety requirements. Experience with in-process inspections, finished product testing, and quality documentation. Familiarity with analytical testing methods and laboratory equipment. Proficiency with Microsoft Office and Quality Management Systems Leadership & Behavioral Skills Strong attention to detail and problem-solving capability. Ability to lead teams across multiple shifts in a manufacturing environment. Effective communicator with production, sanitation, and quality teams. Willingness to spend significant time on the production floor Physical Requirements Regularly required to stand, walk, reach, and handle materials or equipment. May be required to kneel, crouch, or climb. Must frequently lift or move up to 10 pounds and occasionally up to 50 pounds. Vision requirements include close vision, depth perception, and ability to adjust focus Download attachment(s) This job as a PDF file

Title: Construction Manager - Quality Control Manager / Site Safety and Health Officer (QCM/SSHO) Status: Full-time Safety Sensitive: Yes Midnight Sun Global Services is seeking a well-qualified Construction Manager which will dual-hat the positions of Quality Control Manager and Site Safety and Health Officer in support of a Federal contract at the Portland Air National Guard Base in Portland, Oregon. QCM responsibilities include providing, implementing, and administering a quality control and assurance program to ensure that all work is performed in accordance with project plans and specifications as well as the standards and methods specified in the project Quality Control Plan. SSHO responsibilities include daily administrative and technical management with a staff of personnel who perform safety inspections and training. This person must work with the site Superintendent to maintain onsite presence at all times. Duties/Responsibilities: Quality Control Responsibilities Check and approve all items before submittal and stamp, sign, and date indicating action taken. Identify in writing all proposed deviations from the contract requirements. Update and maintain the quality control (QC) system that complies with FAR 52.246-12 Inspection of Construction. Implement and administer Quality Control Plan (QCP) based on client approved Quality Control Plan (QCP). Perform daily inspections to provide daily inspections ensuring compliance with delivery order requirements. Prepare material submittals and Material Delivery Verification Forms in compliance with the drawings and specifications. Prepare Daily Quality Control Report. Attend Pre-Construction meetings with subcontractors to promote understanding of QCP, applicable specification sections, and expected quality level. Maintain on-site records of: Quality control operations, activities, tests, and inspections performed including the work of subcontractors and suppliers. Drawing records and records of materials used. Factory tests and manufacturers' certifications. Coordinate third party testing agents as outlined in the QCP. Develop and implement methods and procedures to assess cost and responsibility for unacceptable material and supplies. Exercise stop work authority as needed. Monitor all job site operations for compliance with contract requirements in noise and dust control, non-interruption of APS activities, and utility shutdown procedures. Prepare and submit accurate, detailed, daily reports for the project. Ensure compliance with Company Health, Safety, Environment and Quality (HSEQ) guidelines and procedures along with all local requirements (OSHA, USACE EM385.1.1, etc.). Site Safety and Health Responsibilities Manage and supervise all activities including, but not limited to confined space entry, cranes and rigging, excavation/trenching, fall protection, and electrical work. Conduct daily safety and health inspections and maintain a written log which includes area/operation inspected, date of inspection, identified hazards, recommended corrective actions, estimated and actual dates of corrections. Attach safety inspection logs to the Contractors' daily production report. Conduct mishap investigations and complete required accident reports to include mishaps and near misses. Use and maintain OSHA's Form 300 to log work-related injuries and illnesses occurring on the project site for Prime Contractors and subcontractors and make available to the Contracting Officer upon request. Post and maintain the Form 300A on the site Safety Bulletin Board. Maintain applicable safety reference material on the job site. Attend the pre-construction conference, pre-work meetings including preparatory meetings, and periodic in-progress meetings. Review the APP and AHAs for compliance with EM 385-1-1, and approve, sign, implement and enforce them. Establish a Safety and Occupational Health (SOH) Deficiency Tracking System that lists and monitors outstanding deficiencies until resolution. Ensure subcontractor compliance with safety and health requirements. Maintain a list of hazardous chemicals on site and their material Safety Data Sheets (SDS). Maintain a weekly list of high hazard activities involving energy, equipment, excavation, entry into confined space, and elevation, and be prepared to discuss details during QC Meetings. Provide and keep a record of site safety orientation and indoctrination for Contractor employees, subcontractor employees, and site visitors. Manage resources, provide guidance and direction, and establish priorities for implementing health, safety, and environmental policies, procedures, and standards. Prepare and enforce the Contractor's safety program. Formulate, recommend, and evaluate policies, procedures, and standards to ensure safety practices are consistent with prescribed federal and state regulations and laws. Develop and conduct safety and health inspections, training, and orientation as required. Manage workers compensation, auto, and general liability insurance claims. Maintain documentation for auditing and reporting purposes. Exercise stop work authority as needed. Recommend measures to help protect workers from potentially hazardous work methods, processes, or materials. Investigate all job-related and vehicle accidents to identify causes and to determine how such accidents might be prevented in the future. Coordinate the Project Site's Safety and Health Committee meetings. Investigate all unsafe working conditions reported by employees. Manage safety training and education programs, including demonstrating the use of safety equipment. Inspect facilities, machinery, and safety equipment to identify and correct potential hazards, and to ensure safety regulation compliance. Other Maintain on-site presence at all times. Must have an Uncompromising Commitment to Safety! Assist with other duties as assigned. Requirements: Education/Experience 5+ years of experience as a Quality Control Inspector or SSHO on Federal projects similar in size and complexity. Bachelor's degree in Construction Management, Engineering, or related field preferred. Knowledge, Skills, and Abilities Extensive knowledge of building codes and general engineering principles. Working knowledge in the areas of hazard identification and safety compliance. Knowledge and experience with OSHA's guidelines including, but not limited to Confined Space, Cranes and Rigging, Excavation/Trenching, and Fall Protection. Must meet the requirements for EM 385-1-1 and ensure compliance with national consensus safety standards to include but not limited to: CFR 1910, CFR 1926, OSHA, EM 385-1-1. Ability to build and interpret a critical path schedule and construction drawings. Ability to adapt and be flexible to frequent changes in a fast-paced work environment. Strong verbal and written communication skills, to include clear, concise, and professional presentation of information. High computer proficiency and familiarity with Microsoft Office, ProCore, and Adobe. Certifications/Licenses USACE Construction Quality Management for Contractors certification, or ability to obtain in the first 60 days of employment. EM-385 certification (40 hour), or ability to obtain in the first 60 days of employment. OSHA-30, or ability to obtain in the first 60 days of employment. CPR/First Aid certification required within 45 days of hire date. Valid driver's license. Ability to obtain/maintain client site access. Work Environment: Performance of the required job duties will be in a construction environment, which may include various weather conditions. Responsible for driving between project sites that may be away from the assigned office location. Physical Demands: The physical demands described below are representative of those that must be met by an employee to successfully perform the essential functions of this job: Ability to walk terrain and surfaces that may be far, uneven, or temporary. Ability to regularly sit, stand, walk, talk, and hear. Ability to frequently use hands to finger, handle, or feel. Ability to occasionally climb, balance, stoop, kneel, squat, or reach. Ability to occasionally lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Benefits: KIC offers a comprehensive benefits package including: Medical, Dental, and Vision Insurance, 401k with Match, Life and ADD Coverage, Short and Long Term Disability, Education Assistance/Tuition Reimbursement, Employee Assistance Program, Employee Discount Program, and more! Apply online at our website: ************************************* Disclaimer: This is not to be an exclusive list of all responsibilities, duties, and skills required of the person in this job. KIC is an Equal Opportunity Employer as to all protected groups, including protected veterans and individuals with disabilities. Pursuant to The Alaska Native Claims Settlement Act 43 U.S.C. Sec. 1601 et seq., and federal contractual requirements, Kikiktagruk Inupiat Corporation, may legally grant certain preference in employment opportunities to KIC Shareholders, and their Descendants. Successful candidates must adhere to KIC's Drug and Alcohol policy/testing requirements and may be required to pass a background and/or Motor Vehicle Records check. The salary range for this position is based on several factors, including relevant experience, education, skills, and current market conditions.

Job Description Quality Control Manager (QCM), Federal Construction Columbus, GA Full-Time, Onsite, Federal Project Assignment About the Role We are seeking an experienced Quality Control Manager (QCM) to support federal government construction projects in the Columbus, GA area. This role is critical to ensuring all construction activities comply with contract documents, USACE standards, EM 385 requirements, and applicable federal regulations. The QCM will serve as the primary point of contact for quality-related matters and will work closely with the Project Manager, Superintendent, subcontractors, and government representatives. Key Responsibilities Develop, implement, and manage the Contractor Quality Control (CQC) Plan in accordance with USACE and DoD requirements Conduct and document the Three-Phase Control Process: Preparatory, Initial, and Follow-Up Inspections Review and manage submittals, RFIs, and quality documentation for compliance with contract specifications Perform daily quality control inspections across all phases of construction including civil, structural, architectural, and MEP work Prepare and submit daily QC reports, inspection logs, deficiency tracking, and corrective action documentation Coordinate and lead preparatory meetings, initial inspections, and quality coordination meetings Interface directly with Government QA personnel and participate in inspections, audits, and site walks Ensure work is executed in accordance with approved plans, specifications, and safety standards Track deficiencies, oversee corrective actions, and verify closeout compliance Support project closeout activities including punch lists, as-builts, and final inspections What We're Looking For Minimum 5 years of experience as a Quality Control Manager on federal construction projects Demonstrated experience working on USACE, NAVFAC, or other DoD projects Strong knowledge of federal construction standards, quality processes, and documentation requirements Experience coordinating with government inspectors and contracting officers Ability to manage multiple features of work and maintain organized quality records Strong communication skills and attention to detail Required Certifications & Qualifications USACE Construction Quality Management (CQM) for Contractors Certification OSHA 30-Hour Construction Safety Certification Working knowledge of EM 385-1-1 safety standards Ability to pass federal background requirements and site access credentials Valid driver's license Why Join Us? Work on stable, long-term federal government construction projects Clear scope, defined quality standards, and structured project environments Opportunity to work with experienced federal project teams Competitive compensation based on experience and certifications Total Rewards & Benefits Competitive salary or hourly compensation based on experience Per diem, lodging, and travel support if applicable Health insurance options and paid time off Consistent federal project pipeline Apply Today Qualified candidates are encouraged to apply to be considered for current and upcoming federal construction projects in the Columbus, GA area. Confidential inquiries are welcome.

Company Name: Baker Concrete Construction, Inc **Req ID** : 7107 **Travel:** Up to 25% **Number of Openings:** 1 Achieve more in your career with the nation's leading specialty concrete contractor. At Baker Construction, you'll be part of a team that prioritizes people, invests in their development, and offers unparalleled opportunities for professional growth. In this role, you'll be integral to building the future of our country and our company. You'll collaborate across diverse teams, have a hand in significant projects, and dive headfirst into complex challenges with the best in the industry. If you are driven to do more and have the grit to follow through, you'll have everything you need to define your career on your terms. Make a meaningful impact with a team that values ambition and rewards initiative. Apply today and be more with Baker. **Summary** The **Quality Control Manager** directs all site quality control activities and manages the inspection staff. Typically certified as Inspector Level II or III in various disciplines. **Roles and Responsibilities** The **Quality Control Manager** will possess competency in the following areas in order to perform his/her role in a safe, productive, and effective manner. Note that the areas listed are intended to describe the general nature and level of work being performed by co-workers assigned to this role. They are not intended to be an exhaustive list of all the responsibilities, skills, efforts, or working conditions associated with this job. + Manages all Aspects of Quality Control + Oversees Staff + Ensures a Safe Work Environment + Participates in Training/Certifications **Requirements** + Bachelor's Degree in an engineering, scientific, or construction-related discipline from an accredited college or university and 8 years related experience and/or training; or 10 years equivalent combination of education and experience. + Knowledge of construction practices (i.e., formwork, rebar, concrete placing, etc.). + Quality assurance-related experience preferably in the nuclear power industry (DOE/DOD facilities). + Quality inspector experience. + Demonstrated skill and knowledge with applicable quality codes and standards preferably NRC regulations. At Baker Construction, we welcome those who are driven to make things happen. Your tenacity will be rewarded with great pay, excellent benefits, and opportunities to make your mark. This is an opportunity to own your future while working alongside co-workers who are united in our purpose to build better structures and better lives. Go further with an industry leader that puts people first, honors its word, and has the grit to achieve greatness. Baker is an EOE Disability/Veterans Employer. Applicants with physical and/or mental disabilities who require a reasonable accommodation for any or part of the application process may make their requests known by emailing ************************ or calling ************** and asking for HR.

Quality Control Manager (PTR-2024-21973): Bowhead seeks to network witha Quality Control Manager for an upcoming/potential effort, toprovide oversight, direction, and coordination to ensure high standards of quality are accomplished in support of operations for the Primary Training Ranges (PTRs) managed by ACC at Avon Park Range, FL; Grand Bay Range, GA; Belle Fourche (Colony) EWS, WY; Dare County B&G Range, NC; Holloman B&G Ranges, NM; Poinsett EWR, SC; Mountain Home Ranges, ID; and Snyder EWS, TX. PTRs consist of Electronic Warfare Sites (EWS), Electronic Warfare Ranges (EWR), and Bombing and Gunnery Ranges (B&G). **Responsibilities** + Responsible for all quality/safety aspects of range safety during aircraft operations, aircraft emergencies, and ground weapons fire activities during active events. + Provide the quality approach that reduces and minimizes the amount of Government oversight required to determine the acceptability of services + Provide the necessary organizational structure, functional responsibilities, and lines of authority, corporate quality philosophy, and qualified/experienced quality control personnel to meet or exceed the quality requirements of the contract. + Provide a responsive quality program that identifies, corrects, and prevents initial and recurring discrepancies and identifies effective the quality/safety management/program interface with the Government quality assurance evaluation program. + Responsible for and oversee the overall approach to ensure timely and accurate scoring of missions and reporting of scores. Areas include training of personnel for scoring equipment operations and personnel scheduling. + Responsible for all preventive maintenance inspections as required by applicable Air Force Technical Orders/commercial manuals or as specified in the Quality Control Program Plan to ensure maximum service life and peak operational capability at all times. + Develops, implements, and maintains a QC inspection system to conform to all the provisions of the PTR contract and which include as a minimum, checklists and procedures to evaluate operations, maintenance and operator proficiency.Develops the QC Inspection schedule for all scheduled maintenance to be accomplished for the upcoming month. + Other duties as assigned. **Qualifications** + Quality Control experience of a DoD aircraft training range within the last 5 years + Quality management experience of projects with multi-million dollar annual budgets + Experience in developing and implementing quality programs + Familiarity with International Organization for Standardization (ISO) 9000-2015 standards + High school diploma or equivalent required + Expert knowledge pertinent to range operations policies, directives, and products and applicable operational methods and processes. Ability to perform duties in a stressful environment. + Ability to communicate both orally and in writing for conducting conferences, presenting briefings, preparing correspondence, and writing findings and reports. + General knowledge of computer systems including USAF databases, computer graphics, and word processing applications, in order to perform assigned duties. + Ability to exercise tact, diplomacy and patience in order to present sensitive recommendations to affected elements or higher authorities, MAJCOMs, and other Federal agencies. + Current Driver's License required; must be able to be insured through company's vehicle insurance policy while driving work/government/rental vehicles during working hours, and for the duration of employment. + Must be a US citizen. **Physical Demands** + Must be able to lift up to 50 pounds. + Must be able to stand and walk for prolonged period amounts of time. + Must be able to twist, bend, and squat periodically. + High noise levels are common as is the potential exposure to heat/cold, noise, dusts, mist, and/or fumes. **Environment** + Work areas consists of office and non-office settings + Must be able to lift 50 lbs. unassisted. + Job demands will require physical dexterity and flexibility. + Must be physically able to sit, stand, kneel and climb. + Must be willing and able to wear company provided personal protective equipment; such as hearing protectors, safety glasses, gloves, etc. + Must comply with all applicable USAF and Bowhead safety rules, regulations, and policies. + Changing work locations, and overtime required at times to support operations. SECURITY CLEARANCE REQUIREMENTS: Must currently hold a security clearance at the Secret level. US Citizenship is a requirement for Secret clearance at this location. Applicants may be subject to a pre-employment drug & alcohol screening and/or random drug screen, and must follow UIC's Non-DOT Drug & Alcohol Testing Program requirements. If the position requires, an applicant must pass a pre-employment criminal background history check. All post-secondary education listed on the applicant's resume/application may be subject to verification. Where driving may be required or where a rental car must be obtained for business travel purposes, applicants must have a valid driver license for this position and will be subject to verification. In addition, the applicant must pass an in-house, online, driving course to be authorized to drive for company purposes. UIC is an equal opportunity employer. We evaluate qualified applicants without regard to race, age, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other protected characteristics EOE/D/V. In furtherance, pursuant to The Alaska Native Claims Settlement Act 43 U.S.C. Sec. 1601 et seq., and federal contractual requirements, UIC and its subsidiaries may legally grant certain preference in employment opportunities to UIC Shareholders and their Descendants, based on the provisions contained within The Alaska Native Claims Settlement Act. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. Please view Equal Employment Opportunity Posters provided by OFCCPhere (******************************************* . All candidates must apply online at ***************** , and submit a completed application for all positions they wish to be considered. Once the employment application has been completed and submitted, any changes to the application after submission may not be reviewed. Please contact a UIC HR Recruiter if you have made a significant change to your application. In accordance with the Americans with Disabilities Act of 1990 (ADA), persons unable to complete an online application should contact UIC Human Resources for assistance *****************/careers/recruitment/ . The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) UIC Government Services (UICGS / Bowhead) provides innovative business solutions to federal and commercial customers in the areas of engineering, maintenance services, information technology, program support, logistics/base support, and procurement. Collectively, the fast-growing Bowhead Family of Companies offers a breadth of services which are performed with a focus on quality results. Headquartered in Springfield, VA, we are a fast-growing, multi-million-dollar company recognized as a top Alaska Native Corporation providing services across the Department of Defense and many federal agencies. Bowhead offers competitive benefits including medical, dental, vision, life insurance, accidental death and dismemberment, short/long-term disability, and 401(k) retirement plans as well as a paid time off programs for eligible full-time employees. Eligible part-time employees are able to participate in the 401(k) retirement plans and state or contract required paid time off programs. **Join our Talent Community!** Join our Talent Community (************************************************************************ to receive updates on new opportunities and future events. **ID** _2024-21973_ **Category** _Program/Project Management_ **Location : Location** _US-ID-Mountain Home AFB_ **Minimum Clearance Required** _Secret_ **Travel Requirement** _25% - 50%_