Quality assurance technician jobs in Alafaya, FL - 355 jobs

This position is for a Travel Cath Lab Technologist responsible for assisting cardiologists during invasive cardiac catheterization procedures while providing quality patient care in hospital settings. Candidates must hold current licensure, have specialty certifications, and preferably two years of relevant Cath Lab experience. The role is a 13-week travel assignment with comprehensive benefits including housing allowances, health insurance, and travel reimbursements. MedPro Healthcare Allied Staffing is seeking a travel Cath Lab Technologist for a travel job in Orlando, Florida. Job Description & Requirements Specialty: Cath Lab Technologist Discipline: Allied Health Professional Start Date: Duration: 13 weeks 40 hours per week Shift: 8 hours, days Employment Type: Travel MedPro Healthcare Staffing, a Joint Commission-certified staffing agency, is seeking a quality Cath Lab Technologist for a contract with one of our top healthcare clients. Requirements Current License in good standing Appropriate specialty certifications/credentials Two years of Cath Lab experience preferred, ideally in a critical care setting. Benefits Weekly pay and direct deposit Full coverage of all credentialing fees Private housing or housing allowance Group Health insurance for you and your family Company-paid life and disability insurance Travel reimbursement 401(k) matching Unlimited Referral Bonuses up to $1,000 Duties Responsibilities The primary responsibility of the Cath Lab Tech is to provide assistance with patient care in the cardiac catheterization lab (CCL) through the provision of technical assistance to the cardiac catheterization team. Provides direct, safe, competent and quality patient care in the Interventional Cardiology department. Assists in the performance of various invasive cardiac or peripheral vascular diagnostic and therapeutic procedures. Sustains a high level of patient care by communication with the patients, families, and physicians and co-works to address the physical, general and psychosocial needs of the patient. Functions under the direction and immediate supervision of the cardiologist/radiologist performing the procedure. Assists cardiologist during procedures by operating ancillary equipment, anticipating and obtaining catheters, wires and other necessary inventory and medications as ordered. Assure compliance with federal, state, and local technical and professional regulations and accepted practiced guidelines. Delivers quality, cost-effective patient care in a professional manner. Works effectively to maintain an environment of excellence, which is patient-focused, providing timely, compassionate, quality patient care. Promotes and maintains a safe work environment for both staff and customers, incorporating national patient safety initiatives. Prepare and update patient records accurately and legibly. About Agency MedPro Healthcare Staffing is a Joint Commission certified provider of contract staffing services. Since 1983, we have placed nursing and allied travelers in top healthcare facilities nationwide. Join us today for your very own MedPro Experience. If qualified and interested, please call for immediate consideration. MedPro Staffing is an Equal Opportunity Employer. All applicants will be considered for employment without attention to race, color, religion, national origin, age, sex, disability, marital status or veteran status. Key Words: Cath Lab Technologist, EKG Tech, Electrocardiograph Tech *Weekly payment estimates are intended for informational purposes only and include a gross estimate of hourly wages and reimbursements for meal, incidental, and housing expenses. Your recruiter will confirm your eligibility and provide additional details. MedPro Job ID #a0Fcx000008eYUcEAM. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Cath Lab Technologist Cath Lab: Cath Lab Technologist. About MedPro Healthcare Allied Staffing At MedPro Healthcare Staffing, we believe no one cares more for caregivers than we do. Our mission is simple: you focus on your patients, and we'll take care of the rest. As a Joint Commission-certified leader in temporary and contract healthcare staffing since 1983, MedPro has proudly connected nursing and allied travelers with top healthcare facilities across the nation. With thousands of job opportunities available nationwide, we make it easy to find assignments that align with your goals and lifestyle. Our on-staff clinical support team-alongside a compassionate group of experienced recruiters-provides hands-on guidance every step of the way. From Day 1 medical benefits and a 401(k) plan to personalized career support, we're committed to ensuring every professional we serve feels valued, cared for, and empowered to succeed. Guided by a CEO who is a Registered Nurse, MedPro is built on a foundation of clinical insight and genuine compassion for the caregiving community. Through The MedPro Experience, we deliver travel assignments that are rewarding, memorable, and designed to help you DREAM big, EXPLORE often, and ACHIEVE greatness. Benefits Day 1 medical, dental, and vision benefits for you and your family Weekly pay and direct deposit Unlimited Referral Bonuses starting at $500 On Staff Clinical Support Team Access to nationwide travel assignments MPX+ Mobile appreal-time access to jobs, credentials, assignment details, and more Full coverage of all credentialing fees Private housing or housing allowance Tax Free Per Diems, Housing Stipends and Travel Reimbursements Company-paid life and disability insurance Travel reimbursement 401(k) matching Benefits Weekly pay Employee assistance programs Referral bonus Keywords: Cath Lab Technologist, Cardiac Catheterization, Cardiovascular Technologist, Travel Healthcare Job, Interventional Cardiology, Patient Care, Cardiology Technician, Healthcare Staffing, Travel Nurse, Medical Technician

We are the leading provider of professional services to the middle market globally, our purpose is to instill confidence in a world of change, empowering our clients and people to realize their full potential. Our exceptional people are the key to our unrivaled, culture and talent experience and our ability to be compelling to our clients. You'll find an environment that inspires and empowers you to thrive both personally and professionally. There's no one like you and that's why there's nowhere like RSM. At RSM, associates work with large and small companies in various industries. They develop strong working relationships with clients built on understanding their businesses and challenges. Associates work on multiple team engagements each year, including several pieces of any particular assignment - not just one part. Working in a mutually respectful team environment helps our associates perform at their best and integrate their career with their personal life. Examples of responsibilities include: Understanding clients' needs and expectations, their business and industry, accounting and control systems, employees, company values and industry-related GAAP and GAAS issues Developing an understanding of the RSM audit approach and tools Assessing risks and evaluating the client's internal control structure Performing substantive tests and tests of internal controls to identify and resolve accounting or reporting issues Drafting financial statements under prescribed formats Basic Qualifications: Minimum B.A / B.S. degree or equivalent from an accredited university by the time employment commences Accounting major Travel to assigned client locations is required. Must have access to and ability to arrange for use of reliable modes of transportation to those locations Ability to travel up to 25% A minimum 3.0 GPA is preferred Preferred Qualifications: Excellent written and verbal communication skills Strong computer skills, including MS Office Ability to work as an effective member of a team Motivated to work in a fast-paced environment Client focused Ability to multitask At RSM, we offer a competitive benefits and compensation package for all our people. We offer flexibility in your schedule, empowering you to balance life's demands, while also maintaining your ability to serve clients. Learn more about our total rewards at ************************************************** All applicants will receive consideration for employment as RSM does not tolerate discrimination and/or harassment based on race; color; creed; sincerely held religious beliefs, practices or observances; sex (including pregnancy or disabilities related to nursing); gender; sexual orientation; HIV Status; national origin; ancestry; familial or marital status; age; physical or mental disability; citizenship; political affiliation; medical condition (including family and medical leave); domestic violence victim status; past, current or prospective service in the US uniformed service; US Military/Veteran status; pre-disposing genetic characteristics or any other characteristic protected under applicable federal, state or local law. Accommodation for applicants with disabilities is available upon request in connection with the recruitment process and/or employment/partnership. RSM is committed to providing equal opportunity and reasonable accommodation for people with disabilities. If you require a reasonable accommodation to complete an application, interview, or otherwise participate in the recruiting process, please call us at ************ or send us an email at *****************. RSM does not intend to hire entry-level candidates who require sponsorship now or in the future. This includes individuals who will one day request or require RSM to file or complete immigration-related forms or prepare letters on their behalf in order for them to obtain or continue their work authorization. RSM will consider for employment qualified applicants with arrest or conviction records. For those living in California or applying to a position in California, please click here for additional information. At RSM, an employee's pay at any point in their career is intended to reflect their experiences, performance, and skills for their current role. The salary range (or starting rate for interns and associates) for this role represents numerous factors considered in the hiring decisions including, but not limited to, education, skills, work experience, certifications, location, etc. As such, pay for the successful candidate(s) could fall anywhere within the stated range. Compensation Range: $70,400 - $84,000

Description & Requirements The Assurance team delivers independent, objective services that bring transparency and confidence to financial reporting. With deep industry knowledge and a proactive, communicative approach, we help clients navigate complex reporting requirements. What You Will Do: * Perform detailed audit procedures over various income statement and balance sheet accounts * Demonstrate a strong understanding of Generally Accepted Accounting Principles (GAAP) to ensure accurate financial reporting, compliance with regulatory standards, and the identification of discrepancies or risks * Deliver exceptional client service that exceeds expectations through timely, unmatched support while cultivating strong relationships as a trusted advisor and partner in their success * Collaborate proactively with key client management to identify issues and recommend practical solutions. * Take ownership of assigned tasks by organizing workflows, monitoring progress, and ensuring timely completion within budget and scope to consistently deliver high-quality outcomes * Utilize technology tools effectively and demonstrate a commitment to process improvement through innovation * Complete Continuing Professional Education (CPE) requirements to maintain technical proficiency and industry knowledge Minimum Qualifications: * Bachelor's Degree in Accounting or related field * Must be eligible to sit for the CPA exam, meeting the educational requirements as defined by the applicable state board of accountancy. * Proficiency in Microsoft Office Suite * Flexibility to travel for client engagements and internal meetings. Travel may include overnight stays. Preferred Qualifications: * Master's Degree in related field * 1+ years of relevant audit experience * Current and valid CPA (Certified Public Accountant) license * Experience with Caseware software for financial reporting and audit documentation #LI-CW1

At Disney, we're storytellers. We make the impossible, possible. We do this through utilizing and developing cutting-edge technology and pushing the envelope to bring stories to life through our movies, products, interactive games, parks and resorts, and media networks. Now is your chance to join our talented team that delivers unparalleled creative content to audiences around the world. "We create happiness." That's our motto at Walt Disney Parks and Resorts. And it permeates everything we do. At Disney, you'll help inspire that magic by enabling our teams to push the limits of entertainment and create the never-before-seen! The Metalworker QC Inspector is more than just a modern day superhero. They conduct routine inspections on rides and equipment to ensure the safety of our Guests and Cast Members. The Metalworker QC Inspector is expected to complete scheduled inspections by the end of shift and assist with repairs if necessary. The field service position may include work from elevated platforms and confined spaces throughout the Walt Disney World Parks and Resort property. The pay rate for this role in Florida is $33.40 per hour. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits. To learn more about our benefits visit: ***************************************

Do you have a minimum of five (5) years' experience in aircraft maintenance on Falcon's, alteration of turbo fan powered business aircraft, and proficient in the use of the various inspection methods, techniques, and practices? If so, APPLY TODAY! Dassault Falcon Jet recently opened a state-of-the-art flagship Maintenance, Repair and Overhaul (MRO) facility at the Melbourne Orlando International Airport in Melbourne, Florida. Dassault Falcon Jet will serve customers across North and South America and beyond, the complex will accommodate all current Falcon models, (including the new, ultra-long-range Falcon 10X, the largest purpose-built business jet), and will be capable of performing major maintenance and modifications on up to 18 Falcon models. Dassault Falcon Jet in Melbourne, Florida is seeking a Quality Control Inspector who will be primarily responsible for performing inspections of aircraft maintenance and alterations for quality and airworthiness. The Quality Control Inspector may also perform aircraft maintenance (including inspection), preventive maintenance and alteration and assist customers with technical and operational support relative to the customer's aircraft. DUTIES AND RESPONSIBILITES * Responsible for Quality Assurance for quality and airworthiness and may report to Maintenance Supervision for the assignment of aircraft maintenance tasks. * Using technical data acceptable to and/or approved by the FAA, the Quality Control Inspector provides inspection and approval for return to service with respect to work performed. * Adheres to general work and safety requirements. * May travel to locations other than the Repair Station's fixed location to support customer aircraft. * May perform inspections, adjusts and repairs, replace components and corrects any malfunction or deficiency with and without power applied to the aircraft. * May perform repairs on components removed from the aircraft. * May remove and re-install aircraft components to gain access for the performance of assigned tasks. * May troubleshoot (fault isolation) aircraft system malfunction. * May perform basic mechanical and electrical removals and installations. * Documents, records, and signs for work performed and/or inspected per RSM/QCM. * Perform other related tasks as assigned by supervision. * May fuel and defuel aircraft. * May perform aircraft line services. * Performs inspection on-site and at off-site locations. * Supports production aircraft under Production Certificate System. * Assists other employees in the performance of their duties within area(s) of qualification. * Is familiar with and adheres to the RSM/QCM and applicable regulations. * Is responsible for and accountable for work performed. QUALIFICATIONS * Possess a Mechanics certificate with Airframe and Power plant ratings. * Minimum 5 years' experience in aircraft maintenance and alteration of turbo fan powered business aircraft. * Trained in or experience with the methods, techniques, practices, aids, equipment, and tools used to perform aircraft maintenance and alterations. * Minimum 5 years' experience working on our Falcon models. * Thoroughly familiar with the applicable regulations, the RSM/QCM and proficient in the use of the various inspection methods, techniques, practices, aids, equipment, and tools appropriate for the work being performed and approved for return to service. * Able to work unsupervised for extended periods. * Excellent written and verbal communications skills. * Can Do attitude - highly motivated, * Demonstrate excellent customer service skills. * Team player that exhibits and models Dassault Falcon Jet core values and attributes. * Repair Station Training * Applicable Airframe Initial Training * Applicable Engine Training * Applicable Avionics Systems Training * RVSM Training * FAR 91.411/FAR 91.413 Training * Human Factors Training * Must be able to climb and lift up to 50lbs. * Performs duties as assigned. Additional Information: This position requires successful completion of the Melbourne Airport background check process. Compensation and Benefits: The compensation for this position typically falls between $38 and $55 per hour. This position is eligible for tech leveling to reflect varying levels of experience. This position is eligible for overtime and may be eligible for shift differential or relocation assistance. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest, and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

GENERAL PURPOSE Help to plan and develop systems and procedures to improve the operating quality and efficiency of the warehouse. Efficiently move gear inbound and outbound as well as doing Quality Control checks on gear upon return from show sites. Operate in accordance with company policies and procedures. PRIMARY RESPONSIBILITIES Preparation, organization, and coordination of equipment for shows as assigned. Loading and unloading of trucks. Driving box truck for delivery and pick-up of equipment Follow systems and procedures to improve the operating quality and efficiency of the department. Coordinate with Project Managers on the details of all shows. Assist Project Managers and other departments regarding show order details, truck pack and overall needs. Contributes to meet department productivity and quality goals. Communicate with Warehouse Manager regarding warehouse daily operations. Review inbound equipment that has been identified as malfunctioning. Diagnose, log and repair equipment that does not pass QC standards. Ensure outbound equipment has been checked and all accessories/parts are included. Organize, clean, and store all equipment that has been tested or returned. Maintain a safe and clean work environment. RELATIONSHIPS & ROLES Build upon the AVmedia culture, core values and core purpose by being always a role model. Forge excellent relationships with all internal and external customers. Sets examples for staff in areas of personal character, commitment, organizational, customer service and leadership skills, and work habits. Maintain high level of customer service with staff to ensure high levels of client satisfaction. Demonstrates ability to communicate, interact and cooperate with all company employees. Requirements KNOWLEDGE & SKILL REQUIREMENTS Ability to drive up to a 24' Box Truck. Since position requires driving a company vehicle, you must be in possession of a valid driver's license. A clean driving record over the past five (5) years is required. Basic reading, writing, and arithmetic skills required. This is normally acquired through a high school diploma or equivalent. Must be able to lift 50lbs. Ability to effectively troubleshoot and assist others in troubleshooting Audio Visual equipment. Must be able to be stand for a majority of the shift. 1-3 years of experience working in a warehouse environment; working with audio, video, lighting, and screen systems. This position requires willingness to work a flexible schedule. Availability required Monday-Sunday, days and nights and holidays. KEY COMPETENCIES Critical thinking and problem solving skills Planning and organizing Decision-making Communication skills Resourcefulness Teamwork Adaptability Stress tolerance Sense of urgency AVmedia Inc. is an Equal Opportunity Employer.

Pritchard Industries is a dynamic and innovative provider of comprehensive facility services, dedicated to enhancing the operational efficiency of our client partners in the industries we serve. With services from facility maintenance and janitorial to landscaping, we enable desired outcomes for our clients through consistent service and outstanding people. We are seeking a Quality Control Inspector for Orlando International Airport (MCO). This dynamic, hands-on inspector will be responsible for upholding quality standards and processes to ensure the cleanliness and maintenance of airport facilities are maintained or exceed contractual obligations. This position will report to the Site Manager. Bilingual: English & Spanish required. * A current and valid Florida driver's license is required * The expectation is to work weekends, days, nights and even holidays if required Responsibilities: * Conduct regular inspections of airport facilities to ensure adherence to quality standards. * Identify opportunities for improvement and address quality concerns promptly. * Engage with customers to understand their needs and address any quality issues. * Analyze data to identify trends and areas for growth within the quality control process. * Provide training, coaching, and feedback to employees to ensure compliance with quality standards. * Generate reports and distribute them to relevant personnel and clients. * Collaborate with management to develop strategies for increasing productivity and maintaining quality. * Stay updated on industry trends and ensure quality processes align with current standards. * Other duties as needed by company Qualifications: * High school diploma or equivalent required; relevant certification or associate degree preferred. * Proven experience in quality control in janitorial/facilities management or similar industry. * Strong attention to detail and ability to identify areas for improvement. * Must have experience and knowledge in janitorial cleaning projects, i.e., floor care, strip and wax, carpet extraction, buffing, scrubbing, burnishing * Strong knowledge of janitorial cleaning equipment and ability to conduct inspections of the cleaning machines. * Excellent communication skills to interact with customers and provide feedback to employees. * Ability to analyze data and generate reports to track quality metrics * Self-motivated with the ability to work independently. Physical Demands: * The Quality Assurance position is a physically demanding position. The work requires extensive walking, standing, bending, and/or heavy lifting. Benefits: * Pay: $20.35/per hr. * Schedule: Third shift: 10:00 pm - 6:30 am * Paid holidays and vacation time * Health Benefits Package * Ancillary benefits-Life insurance, Long Term Disability, FSA, and Dependent Spending care * 401K * Opportunity for growth Management has the exclusive right to alter the scope of work within the framework of the job description at any time without prior notice. Pritchard Industries participates in E-Verify. EEO Notice: Pritchard Industries is an Equal Opportunity Employer and will consider all qualified applicants without regard to race, color, creed, genetic information, religion, national origin, ethnicity, gender; gender identity, sexual orientation, pregnancy, childbirth or related medical condition, age, disability or handicap, servicemember status, relationship or association with a protected veteran, and any other category protected by Federal, state, or local law.

Full-time Description Job Description: Every boat that leaves the facility must meet or exceed Nautique's standards. This position assists production staff in finding solutions to problems and working with management to ensure the highest quality standards possible. Duties and Responsibilities: Ensures that all the quality check procedures put in place by the company are followed during every production phase. Approves incoming materials by confirming specifications, conducting visual and measurement tests, and rejecting and returning unacceptable materials. Approves in-process production by confirming specifications, conducting visual and measurement tests, and communicating required adjustments to the production supervisor. Approves finished products by confirming specifications; conducting visual and measurement tests; returning products for re-work; confirming re-work. Documents inspection results by completing reports and logs, summarizing re-work and waste, and inputting data into a quality database. Keeps measurement equipment operating by following operating instructions and calling for repairs as needed. Maintains a safe and healthy work environment by following standards, procedures, and complying with legal regulations. Updates job knowledge by participating in educational opportunities; reading technical publications. Accomplishes quality and organization mission by completing related results as needed. Enforces quality procedures and notes the corrective actions that are taken when needed. Educates the production team on quality control issues and works with department managers to improve overall company safety and product quality. Performs product/process analysis for quality improvement. Represents manufacturing on cross-functional teams. Accomplishes all tasks as appropriately assigned or requested including keeping the work area clean and orderly. Must comply with all OSHA and safety procedures. Performs any other duties as assigned by management. Requirements Skills and abilities for success in this position: Excellent communication skills, including written, verbal, and visual. Excellent organizational skills and self-motivation. Ability to identify different models and read orders. Computer skills including Microsoft and ability to learn Quality programs. Some areas require added skills depending on QC location: Lamination, Gelcoat, Upholstery, Electrical & Water Testing; boat pulling, driving w/trailer; forklift certified. Ability to manage one's own time and respect the time of others. Ability to consider the relative costs and benefits of potential actions to choose the most appropriate one. Ability to work effectively individually or with a team. Ability to perform tasks under time pressure deadlines. Ability to communicate information and ideas so others will understand. Ability to tell when something is wrong or is likely to go wrong. Knowledge, Education, and Experience include but are not limited to the following: 2 years' experience with boats/or at Nautique. High school diploma or equivalent; college degree preferred. Must be a licensed driver with a good driving record (subject to MVR). Ability to check boats and or parts in accordance with Nautique's Quality System. Must have strong attention to detail. Physical and Work Requirements: Must be able to work in a non-climate-controlled environment where ambient air temperature can exceed outside air temperature. Must be able to bend at the waist and knees and stand for extended periods. Must be able to climb into and out of the interior of boats. Must be able to wear proper safety equipment as needed. Must be able to lift 50 pounds when necessary. The ability to see details at close range. Be able to use and maintain small hand tools (grinder, scraper, razor knife, blower, etc.)

Job DescriptionProduction Quality TechnicianThe Production Quality Technician plays a key role in ensuring the consistency, safety, and compliance of all manufactured products and processes. This position focuses on quality assurance for batch-manufactured products, incoming raw materials, packaging, labeling, outgoing shipments, product testing, and internal processes - all in alignment with ISO 9001:2015 and the company's Quality Management System (QMS). A strong quality mindset, excellent teamwork, communication skills, and attention to detail are essential for success in this role.Key Responsibilities • Develop a thorough understanding of all processes related to product manufacturing, identification, packaging, shipping preparation, and quality assurance for all products and materials. • Gain comprehensive knowledge of all product lines, documentation standards, and the EBS Quality Management System (ISO 9001:2015). • Perform quality testing, inspections, and reporting on both products and incoming materials. • Prepare, review, and correct Certificates of Analysis and other quality-related documentation. • Record test results and production data; utilize statistical software, data analysis techniques, and SPC charting to monitor and improve performance.• Safely handle, weigh, and transfer hazardous materials from bulk containers for use in production.• Perform calibration, verification, and maintenance on all equipment; monitor and record process and environmental data; prepare reports for management and regulatory agencies.• Maintain a compliant, organized laboratory notebook in accordance with intellectual property protection standards.• Investigate non-conformances and implement corrective and preventive actions. • Support continuous improvement and maintenance of the Quality Management System (QMS) by writing, reviewing, and updating procedures and documentation. • Maintain a clean and safe work environment; consistently adhere to all safety policies and protocols. Qualifications· • Associate degree or higher preferred; equivalent experience or certifications may be considered.· • Strong understanding of mathematics and statistics (beyond algebra).· • Proficiency with Microsoft Excel, Access, and Office Suite; experience with statistical or SPC software a plus.· • Strong mechanical aptitude and familiarity with basic hand tools.· • Excellent attention to detail and a commitment to product quality.· • Ability to read and follow Standard Operating Procedures (SOPs).· • Willingness to work overtime or weekends as needed, and adjust shifts to cover absences or vacations. Physical Requirements· • Ability to perform manual labor in hot, humid, or outdoor conditions as required.· • Work safely in environments with fumes, airborne particles, noise, and vibration while wearing proper Personal Protective Equipment (PPE).· • Physically capable of pushing or pulling objects over 100 lbs; lifting up to 70 lbs unassisted to chest height or on stairs; carrying 70 lb pails between work areas.· • Comfortable standing or walking for up to 3 hours, and able to stoop, kneel, crouch, bend, and twist as needed.· • Must have clear vision, including color recognition, depth perception, peripheral vision, and the ability to focus on fine details. E04JI800t97s4083npp

Titan Florida is a wholly owned subsidiary of Titan America LLC, a leading environmentally and socially progressive heavy building materials company located in the eastern United States. Titan America is part of the TITAN Group, an independent, multi-regional producer of cement and other related building materials. Our products include cement, aggregate, ready-mixed concrete, and fly ash beneficiation. TITAN Group has a record of continuous growth since its establishment in 1902. It has expanded its production and distribution operations into 13 countries, employing more than 5,500 people. Our products protect human life and personal property, improve the quality of life, generate economic prosperity, and connect society. We are seeking a Concrete Quality Control Technician in the Melbourne/Cocoa area, Florida. This salaried non-exempt position reports directly to the Quality Supervisor. The primary functions of this position are to ensure high quality ready-mix product and provide industry related technical assessments. Responsibilities Responsibilities: Perform sample testing and monitoring of our concrete production and procedures for the region. Observe job site testing and perform comparative testing with independent testing agencies. Communicate with customers, testing laboratories, and dispatch and plant supervisors regarding mix utilization and admixture dosage rates. Perform plant inspections of our facilities and recommend corrective action to ensure compliance with project specifications, VDOT, Federal specifications and Titan America's QA guidelines. Perform visual inspection assessments of jobsite conditions, solutions, and recommendations to correct problems if they occur. Monitor test report data and plant records to help determine specification compliance in accordance with project, Federal and State specifications. Perform all pertinent ASTM, ACI and FDOT testing procedures and evaluations. Supports Sales and Production departments in resolving quality-based customer queries and complaints. Participates in the analysis of customer claims and supports the investigation of the causes linked to process or production conditions. Qualifications FDOT Plant, ACI Field Testing, Aggregate, and Lab Technician Certifications preferred or able to obtain within the first six months of hire. Minimum one-year experience in Ready Mix Concrete, quality control, or related industry. H.S. Diploma or equivalent required, college degree preferred. Must have excellent interpersonal, verbal, and written communication skills. Must be computer literate in Windows, Excel, Adobe, and MS Office. Knowledge of other software programs and computer functionality a plus. Ability to work flexible shifts including nights, weekends, and overtime. Excellent data entry skills and ability to multi-task under pressure. Titan Florida is an Equal Employment Opportunity (EEO) / Affirmative Action employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, veteran status, genetic data, or other legally protected status.

Titan Florida is a wholly owned subsidiary of Titan America LLC, a leading environmentally and socially progressive heavy building materials company located in the eastern United States. Titan America is part of the TITAN Group, an independent, multi-regional producer of cement and other related building materials. Our products include cement, aggregate, ready-mixed concrete, and fly ash beneficiation. TITAN Group has a record of continuous growth since its establishment in 1902. It has expanded its production and distribution operations into 13 countries, employing more than 5,500 people. Our products protect human life and personal property, improve the quality of life, generate economic prosperity, and connect society. We are seeking a Concrete Quality Control Technician in the Melbourne/Cocoa area, Florida. This salaried non-exempt position reports directly to the Quality Supervisor. The primary functions of this position are to ensure high quality ready-mix product and provide industry related technical assessments. Responsibilities Responsibilities: * Perform sample testing and monitoring of our concrete production and procedures for the region. * Observe job site testing and perform comparative testing with independent testing agencies. * Communicate with customers, testing laboratories, and dispatch and plant supervisors regarding mix utilization and admixture dosage rates. * Perform plant inspections of our facilities and recommend corrective action to ensure compliance with project specifications, VDOT, Federal specifications and Titan America's QA guidelines. * Perform visual inspection assessments of jobsite conditions, solutions, and recommendations to correct problems if they occur. * Monitor test report data and plant records to help determine specification compliance in accordance with project, Federal and State specifications. * Perform all pertinent ASTM, ACI and FDOT testing procedures and evaluations. * Supports Sales and Production departments in resolving quality-based customer queries and complaints. * Participates in the analysis of customer claims and supports the investigation of the causes linked to process or production conditions. Qualifications * FDOT Plant, ACI Field Testing, Aggregate, and Lab Technician Certifications preferred or able to obtain within the first six months of hire. * Minimum one-year experience in Ready Mix Concrete, quality control, or related industry. * H.S. Diploma or equivalent required, college degree preferred. * Must have excellent interpersonal, verbal, and written communication skills. * Must be computer literate in Windows, Excel, Adobe, and MS Office. Knowledge of other software programs and computer functionality a plus. * Ability to work flexible shifts including nights, weekends, and overtime. * Excellent data entry skills and ability to multi-task under pressure. Titan Florida is an Equal Employment Opportunity (EEO) / Affirmative Action employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, veteran status, genetic data, or other legally protected status.

A client in the defense industry is looking for someone to join their team as a Quality Technician! This person will be responsible for performing inspections, tests, analyses and audits of products and processes including microelectronics, precision mechanical, test equipment and fully integrated systems. They will be responsible for ensuring each product and/or process remains compliant and ensure quality standards for both customer and regulatory requirements. They will assist in the inspection of repairs for subassemblies and system level integrated platforms. This person will collaborate with quality engineers to develop inspection requirements, techniques and implement quality plans. We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to ********************.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: **************************************************** Skills and Requirements · B: HS Diploma & 4 years of experience OR A.A. & 0-2 years of experience · C: HS Diploma & 6 years of experience OR A.A. & 2 years of experience · D: HS Diploma & 8 years of experience OR A.A. 4 years of experience · Experience performing inspections of circuit card level assemblies and/or electro-mechanical assemblies · Experience reading and understanding of engineering drawings and bills of materials · Experience performing final inspection of test equipment and monitoring to ensure compliance · Experience communicating and working with customers to present finished goods, test results, etc Strong soft skills - work ethic, communication, following tasks

Why Join Our Team? Joining Rinker means becoming a part of a team that's committed to making a positive impact. When you work with us, you're not just building structures; you're contributing to the growth and development of communities. As a Quality Control Technician, you will be responsible for quality control in all phases of production utilizing established procedures, quality control manuals, and equipment. Join our team and enjoy a comprehensive benefits package that includes competitive pay, a 401k match, paid vacation, holidays, employee discounts, and more. Why Choose a Career with Us? * Growth and Learning: We provide an environment that encourages personal and professional growth, helping you build a long-lasting, successful career. * Innovation: Be a part of a team that's shaping the future of construction and infrastructure. * Impact: What we build today will shape the world for generations to come. Your work here will be your legacy, impacting communities and leaving a lasting mark on the world. * Collaboration: We value collaboration and teamwork, knowing that the best solutions are born through shared knowledge and diverse perspectives. Join us and work with talented, like-minded professionals. About the Role: * Responsible for quality control in all phases of production utilizing established procedures, quality control manuals, and equipment * Read and understand shop fabrication drawings and specs and verify dimensions of product or material * Perform internal audits and maintain quality control inspection records * Act as liaison to outside inspectors * Resolve quality issues due to production and fabrication errors * Inspect finished good loads prior to plant departure * Coach and train the team in quality requirements Qualifications: * High School Diploma or GED. * 2 years manufacturing experience. Prior QC experience preferred. * Ability to read and interpret shop drawings and American Society for Testing and Materials (ASTM) specifications. * Ability to interpret readings from Micrometers, Calipers, and other QC tools. * Excellent communication and organization skills. We're always on the lookout for passionate individuals who are committed to Excellence and share our vision of a better future. If you're ready to take the next step in your career and contribute to some of the most exciting infrastructure projects, we invite you to explore our current job openings and start your journey with us. Ready to Apply? * The process is simple. Click on the "apply" button to get started.

Job Description At Curaleaf, we're redefining the cannabis industry with a strong commitment to quality, expertise, and innovation. As a leading global cannabis provider, our brands-including Curaleaf, Select, and Grassroots-offer premium products and services in both medical and adult-use markets. Join us at Curaleaf to be part of a high-growth, purpose-driven company that champions corporate social responsibility through our Rooted in Good initiative, supporting community outreach and positive change. Here, you'll have the opportunity to make a meaningful impact, drive innovation, and help shape the future of cannabis. Title: Production Technician Pay Rate: $ Location: Job Type: Full Time/Part Time | Non-Exempt Shift: [DAYS] | [SHIFT] Who You Are: You're a hands-on production pro who thrives in a fast-paced, quality-driven environment. With an eye for detail and a steady focus on consistency, you take pride in packaging and labeling premium cannabis products-from dried flower and pre-rolls to vape cartridges, pens, and infused items. You enjoy working with clear procedures, following safety and compliance standards, and collaborating with teammates to keep operations running smoothly. Your reliability and commitment to accuracy ensure every finished product meets Curaleaf's high standards before it reaches our customers. What You'll Do: As a Production Technician at Curaleaf, you'll play a key role in delivering high-quality cannabis products by supporting every stage of the packaging process. In this fast-paced, hands-on role, you will: Stage products and packaging materials across production lines while performing quality assurance checks to meet daily schedules and Curaleaf's high standards Boost operational efficiency and minimize waste by taking ownership, collaborating with the team, and communicating effectively Conduct in-process and final quality checks, including testing, visual inspections, and precise weighing, while maintaining 100% compliance in data recording, product tracking, and secure packaging Work quickly and efficiently to boost productivity while keeping the extraction room organized, clean, and inspection-ready Operate efficiently while following OSHA standards, Curaleaf SOPs, and all required procedures, ensuring every product is accurately labeled and fully compliant with state regulations What You'll Bring: You are eager to learn and can be trained on various production equipment and SOPs while consistently meeting performance expectations set by leadership You bring strong attention to detail and effective communication skills, thriving in a fast-paced, team-based production environment You can comfortably perform repetitive tasks with focus and consistency over extended periods You have a strong work ethic, are punctual and reliable, and help maintain a positive, professional team environment You have a high school diploma, GED, or equivalent Even Better If: You have at least one year of manufacturing or packaging experience focused on product safety, consumer satisfaction, and delivering high-quality results Physical Requirements Ability to stand, sit, and walk for extended periods of time (8-10 hours per shift) Ability to lift and carry up to 50 pounds regularly and occasional lifting of heavier items with assistance Frequent and repetitive use of hands and wrists for extended periods of time Repetitive bending, squatting, and reaching Ability to climb ladders or step stools to access plants or equipment Ability to use required PPE when required, such as masks, hair nets, beard covers, respirators, boot covers, scrubs, non-slip shoes, and Tyvek suits as necessary Environmental Conditions Exposure to environments with high humidity, varying temperatures, and strong odors (such as cannabis) Exposure to soil, water, fertilizer, dust, pollen and plant pathogens Exposure to cleaning solvents, such as high volumes of isopropyl alcohol Exposure to loud noises, including but not limited to air compressors, packaging equipment, and alarms Exposure to CO2 manufacturing procedures at OSHA approved CO2 levels Curaleaf Pay Transparency$15-$15 USD What We Offer: Career Growth Opportunities Competitive Pay and Benefits Generous PTO and Parental Leave 401(K) Retirement Plan Life/ Disability Insurance Community Involvement Referral Bonuses and Product Discounts Benefits vary by state, role type, and eligibility. Follow us on Social Media: Instagram: @curaleaf.usa Twitter: @Curaleaf_Inc LinkedIn: Curaleaf LinkedIn Curaleaf Holdings, Inc. (TSX: CURA) (OTCQX: CURLF) ("Curaleaf") is a leading international provider of consumer products in cannabis with a mission to enhance lives by cultivating, sharing, and celebrating the power of the plant. As a high-growth cannabis company known for quality, expertise and reliability, the Company, and its brands, including Curaleaf, Select, Grassroots, JAMS, Find and Zero Proof provide industry-leading service, product selection and accessibility across the medical and adult-use markets. Curaleaf International is the largest vertically integrated cannabis company in Europe with a unique supply and distribution network throughout the European market, bringing together pioneering science and research with cutting-edge cultivation, extraction, and production. Home | Curaleaf | Cannabis with Confidence Our Vision: To be the world's leading cannabis company by consistently delivering superior products and services and driving the global acceptance of cannabis. Our Values: Lead and Inspire. Commit to Win. ONE Curaleaf. Driven to Deliver Excellence. Curaleaf is an equal opportunity employer. Curaleaf recruits, employs, trains, compensates, and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status, and other protected status as required by applicable law. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Individuals adversely impacted by the war on drugs are encouraged to apply. Current Curaleaf employees should apply for open positions through our Internal Job Board, which can be accessed via the link on The Leaf.

The County Materials Family of Companies manufactures and delivers concrete construction products to meet the demand for growing communities. We rely on our talented and dedicated team members to provide reliable products with personalized service. We are seeking a Quality Control Technician for County Materials in Astatula, Florida Job Duties: * Performs quality control inspections, checks, and tests during the manufacture of products * Inspects materials, parts and products at different stages of production * Records observations and may make recommendations for improving processes * Familiar with standard concepts, practices, and procedures within the concrete industry * Regularly observes the production process including setup, casting, stripping and storage of product. * Work with production to identify and resolve quality issues related to casting and concrete performance. * Manage housekeeping to ensure a safe workplace. * Other tasks as needed Work Environment: * Work in indoor and outdoor weather conditions, including extreme hot or cold temperatures * Work near moving machinery and equipment - could include electrical hazards * Work in a noisy environment Physical Requirements: * Carrying/Lifting 10 - 40 Pounds frequently * Carrying/Lifting > 40 Pounds occasionally * Standing / Walking / Climbing * Squatting/Crouching/Kneeling/Bending * Pushing / Pulling / Reaching Above Shoulder Experience & Qualifications: * Understanding of a manufacturing environment. * Concrete plant and/or quality control experience highly desired. * Ability to interpret shop drawings and job specifications. * Proficient Computer Skills with Microsoft Office. * Solid math aptitude. * Must have the ability to train and obtain technical certifications as directed and supported by the company. * Ability to work independently. * Strong organizational, interpersonal and communication skills. * High School diploma or equivalency required. * 1-2 years prior experience in a manufacturing environment * Experience in the construction and/or building materials industry preferred, not required.

The Technical Engineer JNY provides engineering and technical execution support to the design, integration, testing, fielding, and sustainment of Training Aids, Devices, Simulators, and Simulations (TADSS). The individual applies technical expertise to ensure systems meet operational training requirements, technical specifications, and lifecycle performance objectives. Responsibilities include supporting engineering analyses of TADSS capabilities; assisting with development and review of technical requirements, specifications, interface control documents, and system documentation; and supporting system integration activities across hardware, software, networks, and training enablers. The Technical Engineer participates in technical interchange meetings, design reviews, and working groups to identify risks, resolve issues, and ensure technical alignment with objectives. Additional duties include supporting test and evaluation activities; assisting with data collection, analysis, and reporting; supporting configuration and change management activities; and contributing to development of technical reports, briefings, and acquisition artifacts. The role collaborates closely with systems engineers, test engineers, military doctrine analysts, acquisition analysts, logisticians, and leadership to ensure technical solutions effectively support Army training outcomes. The Technical Engineer provides practical, hands-on engineering insight and recommendations to improve system performance, interoperability, maintainability, and training effectiveness across portfolios. Required Education * Bachelor's degree in Engineering, Systems Engineering, Computer Science, Information Technology, or a related technical discipline Required Experience * Minimum of 3 years of experience supporting engineering or technical activities within a DoD, Federal, or defense training environment * Demonstrated experience with: * Technical analysis and system support * Integration or test support for training systems or TADSS * Technical documentation and reporting * Coordination with engineering, acquisition, and program teams * Active Secret Clearance Preferred Qualifications * Familiarity with: * TADSS development, integration, or sustainment * Systems engineering lifecycle processes * Test & Evaluation support for training systems * Prior military or Army training systems experience

· Incoming ingredients evaluation for conformance with product specifications · Perform inspection activities, testing to ensure continuous control over production specification throughout the production cycle. · Inspect blending/bottling operations for conformance to process and package specification. · Determine Brix-Acid Ratio (BAR) and oil level in product blends · Maintain and verify calibration activities for laboratory & operation equipment · Perform microbiological plating functions. · Maintain QA record keeping, filing, verifying, and review, documents for accuracy · Comply with SO Water testing activities · Environmental testing activities, including swabs and air samples · Hold process activities following SOPs on product holds · Monitor compliance with GMPs, HACCP, SOPs, regulatory compliance and company polices · Other duties as assigned Skills laboratory, Gmp, Wet chemistry, Titration, Analytical chemistry, Batch record, Fda, chemistry, biology, quality assurance, food science Top Skills Details laboratory Additional Skills & Qualifications Maintains the raw material sampling program of the quality lab and tests the materials associated with this program and maintains database. Maintains micro corrective action log. Maintains the calibration program for all lab equipment for the micro Experience Level Intermediate Level Job Type & Location This is a Contract to Hire position based out of Davenport, FL. Pay and Benefits The pay range for this position is $18.00 - $20.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Davenport,FL. Application Deadline This position is anticipated to close on Jan 20, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

The Travel Cath Lab Technologist provides specialized technical assistance during cardiac catheterization procedures in healthcare settings, working under the supervision of cardiologists. This role requires current licensure, relevant certifications, and preferably two years of critical care experience. The position offers travel benefits, competitive weekly pay, comprehensive insurance, and career support through a certified staffing agency. MedPro Healthcare Allied Staffing is seeking a travel Cath Lab Technologist for a travel job in Daytona Beach, Florida. Job Description & Requirements Specialty: Cath Lab Technologist Discipline: Allied Health Professional Start Date: Duration: 13 weeks 36 hours per week Shift: 13 hours, days Employment Type: Travel MedPro Healthcare Staffing, a Joint Commission-certified staffing agency, is seeking a quality Cath Lab Technologist for a contract with one of our top healthcare clients. Requirements Current License in good standing Appropriate specialty certifications/credentials Two years of Cath Lab experience preferred, ideally in a critical care setting. Benefits Weekly pay and direct deposit Full coverage of all credentialing fees Private housing or housing allowance Group Health insurance for you and your family Company-paid life and disability insurance Travel reimbursement 401(k) matching Unlimited Referral Bonuses up to $1,000 Duties Responsibilities The primary responsibility of the Cath Lab Tech is to provide assistance with patient care in the cardiac catheterization lab (CCL) through the provision of technical assistance to the cardiac catheterization team. Provides direct, safe, competent and quality patient care in the Interventional Cardiology department. Assists in the performance of various invasive cardiac or peripheral vascular diagnostic and therapeutic procedures. Sustains a high level of patient care by communication with the patients, families, and physicians and co-works to address the physical, general and psychosocial needs of the patient. Functions under the direction and immediate supervision of the cardiologist/radiologist performing the procedure. Assists cardiologist during procedures by operating ancillary equipment, anticipating and obtaining catheters, wires and other necessary inventory and medications as ordered. Assure compliance with federal, state, and local technical and professional regulations and accepted practiced guidelines. Delivers quality, cost-effective patient care in a professional manner. Works effectively to maintain an environment of excellence, which is patient-focused, providing timely, compassionate, quality patient care. Promotes and maintains a safe work environment for both staff and customers, incorporating national patient safety initiatives. Prepare and update patient records accurately and legibly. About Agency MedPro Healthcare Staffing is a Joint Commission certified provider of contract staffing services. Since 1983, we have placed nursing and allied travelers in top healthcare facilities nationwide. Join us today for your very own MedPro Experience. If qualified and interested, please call for immediate consideration. MedPro Staffing is an Equal Opportunity Employer. All applicants will be considered for employment without attention to race, color, religion, national origin, age, sex, disability, marital status or veteran status. Key Words: Cath Lab Technologist, EKG Tech, Electrocardiograph Tech *Weekly payment estimates are intended for informational purposes only and include a gross estimate of hourly wages and reimbursements for meal, incidental, and housing expenses. Your recruiter will confirm your eligibility and provide additional details. MedPro Job ID #a0Fcx000008ezWQEAY. Pay package is based on 13 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Cath Lab Technologist Cath Lab: Cath Lab Technologist. About MedPro Healthcare Allied Staffing At MedPro Healthcare Staffing, we believe no one cares more for caregivers than we do. Our mission is simple: you focus on your patients, and we'll take care of the rest. As a Joint Commission-certified leader in temporary and contract healthcare staffing since 1983, MedPro has proudly connected nursing and allied travelers with top healthcare facilities across the nation. With thousands of job opportunities available nationwide, we make it easy to find assignments that align with your goals and lifestyle. Our on-staff clinical support team-alongside a compassionate group of experienced recruiters-provides hands-on guidance every step of the way. From Day 1 medical benefits and a 401(k) plan to personalized career support, we're committed to ensuring every professional we serve feels valued, cared for, and empowered to succeed. Guided by a CEO who is a Registered Nurse, MedPro is built on a foundation of clinical insight and genuine compassion for the caregiving community. Through The MedPro Experience, we deliver travel assignments that are rewarding, memorable, and designed to help you DREAM big, EXPLORE often, and ACHIEVE greatness. Benefits Day 1 medical, dental, and vision benefits for you and your family Weekly pay and direct deposit Unlimited Referral Bonuses starting at $500 On Staff Clinical Support Team Access to nationwide travel assignments MPX+ Mobile appreal-time access to jobs, credentials, assignment details, and more Full coverage of all credentialing fees Private housing or housing allowance Tax Free Per Diems, Housing Stipends and Travel Reimbursements Company-paid life and disability insurance Travel reimbursement 401(k) matching Benefits Weekly pay Employee assistance programs Referral bonus Keywords: Cath Lab Technologist, Cardiac Catheterization, Cardiovascular Technologist, Travel Healthcare Jobs, Interventional Cardiology, Medical Technologist, Healthcare Staffing, Patient Care, Temporary Healthcare Employment

At Disney, we're storytellers. We make the impossible, possible. We do this through utilizing and developing cutting-edge technology and pushing the envelope to bring stories to life through our movies, products, interactive games, parks and resorts, and media networks. Now is your chance to join our talented team that delivers unparalleled creative content to audiences around the world. "We create happiness." That's our motto at Walt Disney Parks and Resorts. And it permeates everything we do. At Disney, you'll help inspire that magic by enabling our teams to push the limits of entertainment and create the never-before-seen! The Metalworker QC Inspector is more than just a modern day superhero. They conduct routine inspections on rides and equipment to ensure the safety of our Guests and Cast Members. The Metalworker QC Inspector is expected to complete scheduled inspections by the end of shift and assist with repairs if necessary. The field service position may include work from elevated platforms and confined spaces throughout the Walt Disney World Parks and Resort property. The pay rate for this role in Florida is $33.40 per hour. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits. To learn more about our benefits visit: ***************************************