Quality assurance technician jobs in Atlanta, GA - 704 jobs

The main function of a lab technician is to support laboratory operations by maintaining laboratory and supply storage areas, equipment, instruments, and supplies. The lab technician is expected to apply general lab methods, techniques, equipment, and instrumentation in compliance with quality assurance programs and standard operating procedures. Responsibilities + Retrieve samples from Sample Control for analysis. + Perform sample preparation, including aliquoting samples, spiking and tracing samples, preparing reagents, bottling samples, preparing concentrations, separation, sonication, and setting up liquid racks. + Resolve discrepancies and anomalies to ensure samples are properly labeled. + Prepare general lab paperwork, such as recording analysis results, tracking samples, bench sheets, and lab logbooks. + Wash lab glassware to prepare for the next day's samples and stock lab supplies. Essential Skills + Proficiency in laboratory techniques and sample preparation. + Knowledge of biology and chemistry. + High school diploma is required. Additional Skills & Qualifications + An Associate's or Bachelor's degree is preferred. + Experience in quality, microbiology, quality assurance, food chemistry, environmental monitoring, quality control, food safety, and food science. + Consistent job tenure of at least 1 year. + Relevant experience in biology is highly preferred. + New graduates should have achievements within school, such as extracurriculars, internships, research, or jobs. + Success has been seen with individuals from a food service experience. Job Type & Location This is a Contract to Hire position based out of Tucker, GA. Pay and Benefits The pay range for this position is $15.00 - $17.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Tucker,GA. Application Deadline This position is anticipated to close on Jan 29, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

The main function of a lab technician is to support laboratory operations through general maintenance of laboratory and supply storage areas, equipment, instruments, and supplies. The typical lab technician is expected to use general lab methods, techniques, equipment, and instrumentation in compliance with quality assurance programs and standard operating procedures. Job Responsibilities: ? Retrieve samples from Sample Control for analysis ? Perform sample preparation including but not limited to: aliquot samples, spike and trace samples, prepare reagents, bottle samples, prepare concentrations, separation, sonication, liquid rack set up ? Resolve discrepancies and anomalies to ensure samples are properly labeled? Prepare general lab paperwork such as recording analysis results, tracking samples, bench sheets, and lab logbooks ? Wash lab glassware to prepare for next day?s samples? stock lab supplies Skills: ? Verbal and written communication skills, attention to detail, and problem solving skills? Basic ability to work independently and manage one?s time ? Basic knowledge of the information and techniques for lab testing? Basic ability to analyze data and accurately document and record results. Education/Experience:? High school diploma or GED required. ? 0-2 years experience required.

Join our team to play a pivotal role in mitigating tech risks and upholding operational excellence, driving innovation in risk management. As a Tech Risk & Controls Lead in the Cybersecurity and Technology Controls ogranization, you will be responsible for identifying, and mitigating compliance and operational risks in line with the firm's standards. You will also provide subject matter expertise and technical guidance to technology-aligned process owners, ensuring that implemented controls are operating effectively and in compliance with regulatory, legal, and industry standards. By partnering with various stakeholders, including Product Owners, Business Control Managers, and Regulators, you will contribute to the reporting of a comprehensive view of technology risk posture and its impact on the business. Your advanced knowledge of risk management principles, practices, and theories will enable you to drive innovative solutions and effectively manage a diverse team in a dynamic and evolving risk landscape. Job responsibilities Drives efficient and effective execution of assessments, ensuring alignment with organizational objectives, risk appetite, and regulatory compliance Leads the governance of issues raised from assessments, tracking concerns, and resolution of findings Ensures timely and effective closure of identified control deficiencies Provides subject matter expertise in regulatory assessments, ensuring that the organization adheres to applicable frameworks such as HITRUST and other relevant standards Ensures effective identification, quantification, communication, and management of technology risk, focusing on root cause analysis and resolution recommendations Develops and maintains robust relationships, becoming a trusted partner with LOB technologists, assessments teams, and data officers to facilitate cross-functional collaboration and progress toward shared goals Executes reporting and governance of controls, policies, issue management, and measurements, offering senior management insights into control effectiveness and inform governance work Proactively monitors and evaluate control effectiveness, identify gaps, and recommend enhancements to strengthen risk posture and regulatory compliance Required qualifications, capabilities, and skills 5+ years of experience or equivalent expertise in technology risk management, information security, or related field, emphasizing risk identification, assessment, and mitigation Experience with risk management frameworks such as HITRUST, industry standards such as HIPAA, and financial industry regulatory requirements (SOX, PCI, ISO 270001, NIST, GLBA, NYDFS) Proficient knowledge and expertise in data security, risk assessment & reporting, control evaluation, design, and governance, with a proven record of implementing effective risk mitigation strategies Demonstrated ability to influence executive-level strategic decision-making and translating technology insights into business strategies for senior executives Preferred qualifications, capabilities, and skills CISM, CRISC, CISSP, or similar industry-recognized risk and risk certifications are preferred Experience managing projects within Cybersecurity Technology, Risk, and Controls

What We Do FOX Factory designs, engineers, manufactures and markets performance-defining products and systems for customers worldwide. Our premium brand, performance-defining products and systems are used primarily on bicycles, side-by-side vehicles, on-road vehicles with and without off-road capabilities, off-road vehicles and trucks, all-terrain vehicles, snowmobiles, specialty vehicles and applications, motorcycles, and commercial trucks. Some of our products are specifically designed for and marketed to a variety of leading cycling and powered vehicle original equipment manufacturers ("OEMs"), while others are distributed to consumers through a global dealer and distribution network. Fox Factory Holding Corp. is the holding company of FOX Factory, Inc. and is publicly traded (FOXF) on Nasdaq. Why you should join us Not only do we provide competitive wages, you will also have access to great benefits and employee discounts. But more importantly, it's a fun environment where we truly enjoy working as a team and bringing great products to our customers! If this sounds like something you would love to do, and a place you want to be a part of, get in touch with us by submitting your application. We look forward to hearing from you! Position Summary: Lead and motivate the performance of key quality teams in support of manufacturing. Drive improvements for quality control processes and procedures. Position Responsibilities: * Gives direction and improvement recommendations for quality processes. * Ensures compliance with quality control standards. * Monitors quality processes. * May conduct quality training programs for technicians, inspectors and/or for the production line. * Mentors quality and line staff and facilitates problem solving. * Maintains standard quality practices across all processes. * Records data, makes computations, analyzes results, and writes reports. Specific Knowledge, Skills or Abilities Required: * Ability to work with cross-functional teams * Strong leadership ability * Strong manufacturing knowledge (5S, Lean Manufacturing, technical drawing understanding) * Familiarity with MS Office, Excel, and Outlook Position Qualifications: Education: HS Graduate, AA degree in a technical discipline or equivalent experience Experience: 5+ years prior quality control experience required, preferably in manufacturing environment People leadership experience desired, but not required Work Environment and Physical Requirements: Production/Manufacturing environment Lifts up to 50 lbs. on a regular basis Requires walking, standing, bending and lifting for long periods of time Vision abilities required to validate and enter data on computer Disclaimer: This list does not represent all physical demands. Descriptions are representative of those that must be met by employee to successfully perform the essential functions of the job. Reasonable accommodation may be provided to enable individuals with disabilities to perform the jobs' essential functions. Note: FOX provides equal employment opportunities for all employees and applicants for employment without regard to race, color, ancestry, national origin, gender, gender identity, sexual orientation, marital status, religion, age, physical disability (including HIV and AIDS), mental disability, results of genetic testing, or service in the military, or any other characteristic protected by the laws or regulations of any jurisdiction in which we operate. We base all employment decisions -including recruitment, selection, training, compensation, benefits, discipline, promotions, transfers, layoffs, terminations and social/recreational programs - on merit and the principles of equal employment opportunity. Fox offers an excellent compensation package and wide-ranging opportunities for professional development. Medical, Dental, Vision, Health Spending and Dependent Care Savings Accounts, Disability and Life Insurance benefit programs are available, as is a 401k plan with employer matching. Eligibility for all benefit programs is defined by the applicable plan document or employee handbook.

Job Description Description of Tasks: Perform wet chemical analyses Prepare and standardize lab stock reagents as needed Order, receive, stock and maintain inventory of chemicals, reagents and consumable supplies. Interpret MSDS information with respect to lab chemicals and finished products Identify tests to perform based on product testing matrices Record data in computer and/or logbooks and compose SPC charts for data analysis. Use of SAP to retrieve product specifications and test limits Maintain and troubleshoot laboratory equipment to include scales, pH meters, viscometers, and auto titrator. Maintain housekeeping in the department as required Support project work as necessary Demonstrate the proper use of lab-ware including volumetric and non-volumetric. Including menisci reading for graduated cylinder/burette/volumetric flasks Conduct Finish Case Inspections and other Quality checks on Packaging Lines Prepare and maintain Target/Reject bottles Support WCM processes including Early Management, Daily Operations and other Pillars. Required Skills: Ability to prepare a standard calibration curve using internal and external standards for quantitative analyses, with emphasis on calibration curve theory Recognize data trends in results using Statistical Process Control and determine appropriate course of action Ability to operate, troubleshoot and maintain analytical instrumentation such as, but not limited to colorimeter, viscometer and auto titrator. Follow and interpret test methods accurately to ensure consistency and reproducibility of results Maintain laboratory through workplace organization (WPO) Manage workload and prioritize daily responsibilities Possess good troubleshooting skills Perform tests with a high degree of accuracy to support tight production specifications Ability to write, revise and update SOPs and other documentation Knowledge and understanding of analytical techniques, including quantitative and qualitative chemical analyses Demonstrate safe laboratory practices with respect to PPE and chemical handling Intermediate computer skills with experience in Microsoft applications Be willing to work overtime as needed. Workdays and schedule may include 12 hour shifts and change periodically according to business needs Strong commitment to the Plant non-negotiables (Safety, Quality, Environmental and Housekeeping) Demonstrate effective interpersonal skills in order to respond appropriately to supervisors and co-workers Self-motivated work behavior requiring limited to no supervision Be below the written step in attendance and/or work performance

Who is Habasit? Habasit is the global leader in the manufacturing of lightweight conveyor belting. Our slogan “Solutions in Motion” defines us; we are a provider of world class power-transmission and conveying solutions. At Habasit, we understand that a global leader is only as good as the people who represent it, and we are always searching for the right people to keep us in motion. We are looking for ambitious individuals, leaders, and students who are ready to help move us forward. If you have a can-do attitude and want to join a world-class organization, read on and apply today! SUMMARY The Quality Technician is primarily responsible for managing and driving root cause and corrective actions within the manufacturing & business environment. This role ensures that product and process nonconformities are properly investigated, documented, and resolved in compliance with company procedures. The Quality Technician partners with cross-functional teams to identify root causes, implement effective solutions, and monitor results to prevent recurrence. This role is ideal for someone who thrives on problem-solving, compliance, and driving accountability across teams. Things you should know about Habasit's opportunities: Direct hire opportunity Eligible for bonuses and incentives $500 bonus after 90 days of employment $500 additional bonus after 180 days of employment $1000 additional bonus after 365 days of employment $750 referral bonus after 6 months Basic Qualifications Must be 18 years of age Must be cleared on any background screening English literacy Ability to use a calculator and a tape measure. Computer skills a plus Must be able to lift up to 40 pounds. Must be able to stand, walk, sit; use hands and fingers to handle or feel; and reach with hands and arms. Why should you join our team? Our amazing environment keeps safety as its top priority! You can enjoy a collaborative atmosphere in a clean and climate-controlled facility. Our core values are how we thrive, and you will get to work with people who share them: Organizational Pride, Highest Ethical Standards, Quality You Can Trust, Collaboration, Entrepreneurship, and Continuous Improvement. Our opportunities to advance give any qualified associate the opportunity to move to a higher level job. Our on-the-job training and skills development will ensure your success in your job. If you are interested in becoming a part of a World-Class Team, submit your application today! ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Coordinate and oversee corrective and preventive action activities across manufacturing operations. Track, document, and maintain corrective action records in accordance with company requirements. Ensure timely closure of corrective action tasks and verify effectiveness of solutions. Lead investigations into product or process non-conformances. Facilitate problem-solving sessions using tools such as 5 Whys, Fishbone Diagrams, and FMEA. Collaborate with engineering, production, and quality teams to identify systemic issues. Create or revise work instructions or procedures to support improvement actions. Technical writing ability and knowledge of document & configuration control. Prepare reports and summaries of corrective action status. Support internal and external audits by providing corrective action documentation and objective evidence. Recommend process improvements to reduce defects, scrap, and rework. Provide training and guidance to employees on corrective action and best practices. Monitor trends in non-conformances and proactively address recurring issues. Perform quality system and process audits. Perform product inspections and nonconformance dispositions. Experience with QT9 QMS a plus. All other relevant duties as assigned by supervisor QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Additionally, the Quality Technician must have proven root cause problem-solving experience, attention to detail & documentation accuracy; cross-functional collaboration & analytical thinking with a continuous improvement mindset. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions RESPONSIBILITIES OF THIS POSITION: 3-5 years of experience in manufacturing quality assurance or corrective action coordination. Strong knowledge of CAPA processes, ISO 9001, Lean, and Six Sigma methodologies. Excellent organizational, communication, and facilitation skills. Proficiency in quality tools and software for managing & tracking corrective actions & tasks. Ability to assess adequacy of objective evidence to approve and close corrective actions. Strong knowledge of ISO 9001, Lean Manufacturing, and Six Sigma principles. Excellent leadership, communication, and problem-solving skills. Proficiency in quality tools (SPC, FMEA, control plans, etc.) Working experience with Microsoft programs: MS Word, Power Point, Visio, Excel, Outlook. Strong aptitude for learning software and managing data. Demonstrated people and leadership skills, including conflict resolution, problem solving, and performance management. Excellent organizational skills, attention to detail, and the ability to work with staff from diverse disciplines and backgrounds. Other duties as assigned PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand. The employee frequently is required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to walk and sit. The employee is occasionally required to stand, stoop and/or kneel. The employee must regularly lift and/or move up to 25 pounds and occasionally lift and/or move up to 60 pounds, with assistance if necessary. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus.

Monitors production processes of the facility to ensure all products meet company quality and food safety requirements during plant operations to ensure compliance with all company, regulatory and USDA standards. Role qualifications: Employee will need to be able to: Lift and stack up to 40 - 80 pounds Work at a fast pace for up to 3 hours at a time Work in a warm, dusty environment for extended periods. Work in a cold, moist environment for extended periods. Push and/or pull heavy objects Tolerate the sight of continuous moving objects Walk up and down multiple flights of stairs multiple times daily. Work in all weather conditions Be around chemicals for extended periods Adheres to all safety requirements including PPE (Personal Protective Equipment), preventing, and reporting unsafe acts and conditions, Lockout-Tagout procedures and Process Safety Management related matters. Maintains clean and safe working environment. Ensures product meets internal and customer specifications and takes appropriate actions when a non-compliance is noted. Accurately conducts product reviews for compliance to include grading, packaging, temperature control and weights. Performs and accurately records quality checks on product and regulatory checks as specified within company programs and USDA regulations. Monitors associates' work practices and addresses any deficiencies noticed immediately while continually evaluating potential for foreign material contamination while in assigned work areas. Inspects equipment for cleanliness and proper working condition prior to start up and records findings. Monitor production employees to ensure GMP compliance and reports violations Other responsibilities as assigned by Supervisor Essential Skills and Experience: Be dependable and honest. Time management: the ability to organize and manage multiple priorities Strong team player Commitment to company values Be able to work overtime when needed. Attention to detail a must Wear employer-specified protective gear, including gloves, face/eye shields, aprons, boots, etc. (some of which to be supplied by employer). Exposure to chemical solution (with protective gear) Perform varying tasks while standing, lifting, crouching, etc. during long periods of time. Perform all tasks safely and in a manner that will not create or pose a direct threat to the health and/or safety of the sanitation worker or any other person. Physical Demands and work environment: The physical and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands and work environment: Exposure primarily consists of wet and moist floors which include metal grating surfaces. May be exposed to temperatures of 28 degrees to 100 degrees Fahrenheit. May handle product 25 degrees to 50 degrees Fahrenheit. May be exposed to noise ranges of 50 db to 110 db. May be exposed to dust, feathers and all chemicals used in poultry, food, processing facility. Must wear and use protective and safety equipment required for the job as directed by the Company. Occasional exposure to carbon dioxide vapors 10ppm and chlorine less than 20 ppm. Able to stand for several hours. Work may include lifting (up to 80 lbs.), reaching, bending, pushing, extending.

By clicking the "Apply" button, I understand that my employment application process with Takeda will commence and that the information I provide in my application will be processed in line with Takeda's Privacy Notice and Terms of Use. I further attest that all information I submit in my employment application is true to the best of my knowledge. Job Description About BioLife Plasma Services Every day at BioLife, we feel good knowing that what we do helps improve the lives of patients with rare diseases. While you focus on our donors, we'll support you. We offer a purpose you can believe in, a team you can count on, opportunities for career growth, and a comprehensive benefits program, all in a fast-paced, friendly environment. BioLife Plasma Services is a subsidiary of Takeda Pharmaceutical Company Ltd. OBJECTIVES/PURPOSE Monitors designated systems and activities, according to tasks trained and assigned, to ensure that source plasma manufacturing is performed consistently according to current Good Manufacturing Practices (cGMP), the Shire Quality System, and other applicable regulations for a plasma center. Is able to perform all technical tasks required within the work areas and will work in these areas as a Lead Technician (or Center Supervisor by exception) when not acting as the Quality Lead Technician. All below listed responsibilities must be completed in compliance with federal, state, local and company-specific regulations related to quality of product, employee and donor safety, and to the proper performance of day-to-day activities. Employees must also maintain complete and accurate records, in accordance with cGMP. ACCOUNTABILITIES Performs duties associated with Quality (including but not limited to): (50%) Reviews operational records in association with tasks trained and assigned to ensure they are complete, accurate and compliant with cGMP requirements. Tracks deviations in operating procedures and policies through established mechanisms. Reports error, deficiencies, discrepancies and observations to center management and Quality Management Representative (QMR). Conducts monthly quality assurance audits for critical control points and key elements for the systems related to donor suitability, source plasma collection, sample collection, plasma storage, product release, quality assurance, and employee training program. Ensures SOP's are current and that staff perform routine tasks according to SOP through direct observation. In the absence of a QMR, works in collaboration with the management team to prepare for and host (if needed) internal auditors and external inspectors. Assists center management teams to ensure timely closure of observations. Maintain qualifications and perform all duties (core and elective) for Medical History, Phlebotomy, and Sample Processing areas. Train new and existing staff on donor center procedures through demonstration, instruction, observation, and feedback. (30%) Provide leadership and training assistance in support of center management and supervisory team, including oversight of operational flow. (10%) Maintain certification and perform all required duties of Lead Technician. (10%) DIMENSIONS AND ASPECTS Technical/Functional (Line) Expertise A minimum of one year of relevant work experience, preferably in a regulated industry, or an equivalent combination of education and experience. Certification in all three primary operational areas of the plasma center (Medical Historian, Phlebotomy, and Processing Technician). Completion of all training through Lead Technician. Demonstrated understanding of quality assurance in an FDA-regulated environment. Effective communication, organizational, and technical/problem-solving skills. Supports the center management team in identifying operational opportunities for continuous improvement, initiating changes to center processes as needed, through use of company approved procedures (including but not limited to 5S, Value Stream Mapping and Kaizen). Maintain general cleanliness of work area and assist other work areas as needed to ensure a clean and professional environment. Ability to read and follow Standard Operating Procedures (SOPs) and to maintain complete and accurate records. Leadership Integrity Fairness Honesty Perseverance Putting the patient at the center Building trust with society Reinforcing our reputation Developing the business Decision-making and Autonomy Refers to Center Manager for guidance on complex, medium-impact or above decisions (internal) Refers to management team for escalated donor/employee concerns (internal) Interaction Responsible for providing exceptional customer service to donors (external) and fellow employees (internal) Attend staff meetings and other team meetings as required. Good verbal communication and customer service skills. Ability to multi-task and work as a team player. Innovation Coordinates will all other center roles to effectively problem solve, ensure safety of staff and donors, and provide an exceptional customer experience. Complexity Production environment requiring the ability to walk and stand for the entire work shift. Requires frequent leaning, bending, stooping, crouching, and reaching above the shoulders and below the knee. Requires frequent lifting up to 26 lbs. and occasional lifting of materials 32 lbs. - 50 lbs. Must have fine motor coordination, depth perception, and ability to hear equipment sounds from a distance. Due to potential exposure to blood borne pathogens (risk level 1), 90% of work tasks require pro-longed glove wear EDUCATION, BEHAVIOURAL COMPETENCIES AND SKILLS: Essential: High School Diploma or equivalent required Desired: Associate or Bachelor's degree preferred ADDITIONAL INFORMATION FLSA Classification (US) - Non-Exempt Other duties and responsibilities as assigned. BioLife Compensation and Benefits Summary We understand compensation is an important factor as you consider the next step in your career. We are committed to equitable pay for all employees, and we strive to be more transparent with our pay practices. For Location: USA - GA - Kennesaw U.S. Hourly Wage Range: $19.00 - $26.13 The estimated hourly wage range reflects an anticipated range for this position. The actual hourly wage offered may depend on a variety of factors, including the qualifications of the individual applicant for the position, years of relevant experience, specific and unique skills, level of education attained, certifications or other professional licenses held, and the location in which the applicant lives and/or from which they will be performing the job. The actual hourly wage offered will be in accordance with state or local minimum wage requirements for the job location. U.S. based employees may be eligible for short-term incentives. U.S. based employees may be eligible to participate in medical, dental, vision insurance, a 401(k) plan and company match, short-term and long-term disability coverage, basic life insurance, a tuition reimbursement program, paid volunteer time off, company holidays, and well-being benefits, among others. U.S. based employees are also eligible to receive, per calendar year, up to 80 hours of sick time, and new hires are eligible to accrue up to 120 hours of paid vacation. EEO Statement Takeda is proud in its commitment to creating a diverse workforce and providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, parental status, national origin, age, disability, citizenship status, genetic information or characteristics, marital status, status as a Vietnam era veteran, special disabled veteran, or other protected veteran in accordance with applicable federal, state and local laws, and any other characteristic protected by law. Locations USA - GA - Kennesaw Worker Type Employee Worker Sub-Type Regular Time Type Full time Job Exempt No

Chase Staffing is currently hiring a Quality Technician in the White, GA area. The Quality Technician is responsible for all incoming inspections, mainly for solar cells, in accordance with the high industry standards and within manufacturing timescales. Swing Shift: 6:00am - 6:30pm OR 6:00pm - 6:30am Schedule: two days on, two days off Pay rate: $23.00 - $24.00 per hour Responsibilities Inspect raw materials and solar cells to ensure consistency and integrity. Communicate with the Korean Plant regarding solar cell quality issue. Maintain, test, and troubleshoot all instrumentation devices. Test a certain percentage of all products based on industry standards. Report all issues and concerns to senior manager in a timely manner w/o an omission. Accurately record data and production information. Required Qualifications High School Diploma. Must have experience with working with calipers and reading blueprints. 1+ years of experience in quality related fields Proficiency in Korean, both spoken and written. Ability to communicate at all levels both verbally and written. Basic PC skills. Flexibility to adapt to different tasks. Awareness of Health and Safety. Eye for detail and quality. Must be able to communicate effectively within the team. Able to tolerate a fast-paced work environment in areas that are not climate controlled. Assertive, able to cope with pressure, self-motivated and driven team player. Proactive approach toward various issues. For consideration: 1) Apply online www.chasestaffing.com with the Cartersville branch 2) Call 678-655-6533 to schedule an interview after you complete the online application. CHASE provides Equal Employment Opportunities to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, status as disabled veteran, marital status or any other legally- protected characteristic in accordance with applicable laws. In addition, CHASE complies with applicable state and local laws governing nondiscrimination in employment in every location. CHASE is committed to complying fully with the Americans with Disabilities Act (ADA) and ensuring equal opportunity in employment for qualified persons with disabilities.

Monitors production processes of the facility to ensure all products meet company quality and food safety requirements during plant operations to ensure compliance with all company, regulatory and USDA standards. Role qualifications: Employee will need to be able to: Lift and stack up to 40 - 80 pounds Work at a fast pace for up to 3 hours at a time Work in a warm, dusty environment for extended periods. Work in a cold, moist environment for extended periods. Push and/or pull heavy objects Tolerate the sight of continuous moving objects Walk up and down multiple flights of stairs multiple times daily. Work in all weather conditions Be around chemicals for extended periods Adheres to all safety requirements including PPE (Personal Protective Equipment), preventing, and reporting unsafe acts and conditions, Lockout-Tagout procedures and Process Safety Management related matters. Maintains clean and safe working environment. Ensures product meets internal and customer specifications and takes appropriate actions when a non-compliance is noted. Accurately conducts product reviews for compliance to include grading, packaging, temperature control and weights. Performs and accurately records quality checks on product and regulatory checks as specified within company programs and USDA regulations. Monitors associates' work practices and addresses any deficiencies noticed immediately while continually evaluating potential for foreign material contamination while in assigned work areas. Inspects equipment for cleanliness and proper working condition prior to start up and records findings. Monitor production employees to ensure GMP compliance and reports violations Other responsibilities as assigned by Supervisor Essential Skills and Experience: Be dependable and honest. Time management: the ability to organize and manage multiple priorities Strong team player Commitment to company values Be able to work overtime when needed. Attention to detail a must Wear employer-specified protective gear, including gloves, face/eye shields, aprons, boots, etc. (some of which to be supplied by employer). Exposure to chemical solution (with protective gear) Perform varying tasks while standing, lifting, crouching, etc. during long periods of time. Perform all tasks safely and in a manner that will not create or pose a direct threat to the health and/or safety of the sanitation worker or any other person. Physical Demands and work environment: The physical and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands and work environment: Exposure primarily consists of wet and moist floors which include metal grating surfaces. May be exposed to temperatures of 28 degrees to 100 degrees Fahrenheit. May handle product 25 degrees to 50 degrees Fahrenheit. May be exposed to noise ranges of 50 db to 110 db. May be exposed to dust, feathers and all chemicals used in poultry, food, processing facility. Must wear and use protective and safety equipment required for the job as directed by the Company. Occasional exposure to carbon dioxide vapors 10ppm and chlorine less than 20 ppm. Able to stand for several hours. Work may include lifting (up to 80 lbs.), reaching, bending, pushing, extending.

Organizational Relationship: reports directly to the Quality Supervisor Skills, Knowledge, and Abilities: • Ability to apply and interpret statistical data • Computer skills (Word, Excel, and PowerPoint) required • Must be a team player with strong written and verbal communication skills • Must have the ability to actively initiate, lead, and participate in problem solving activities • Must be able to give candid feedback and report findings of non-compliance • Ability to maintain the professional competence, knowledge, and skill necessary for the satisfactory performance of all assigned responsibilities • Two years' experience within a manufacturing environment preferred Description of Duties: • Actively participate in the Layered Process Audits and work towards resolution of open items • Interacts with Group Leaders, Team Leaders, and Engineering in the identification and resolution of product quality problems • Interacts with internal and external customers to resolve quality problems • Lead and record activities for Quality Round Table meetings (Bi-Weekly) • Periodically review specifications and Standard Operating Sheets (SOS) etc. for accuracy and revisions • Support Operations employees as needed to interpret specifications and solve problems • Support the Jackson Quality Department by performing tasks to ensure compliance and initiate continuous improvement of the system • Provide accurate information and feedback to all Business Units and Jackson Operations Leadership Team • Provide training/coaching on quality related issues to Jackson production associates and management • Participate in Kaizen improvement events as required • All other duties as may be assigned at management's discretion All applicants must follow Job Posting instructions as stated in the job bidding policy. All applications must be provided to Human Resources by the deadline listed above. The successful applicant will be notified by his/her supervisor of the start date for the new assignment. Successful applicants will be evaluated during their first 5 days in the new position. If not capable of performing the new duties, they will be returned to either their previous job or any open position for which they qualify. Additional Information For nearly 70 years, MasterBrand has been shaping the places where people come together, enriching lives and creating meaningful memories for our customers. That, combined with our stylish products, expansive dealer and retail network, and dedicated associates, has helped make us the number one North American residential cabinet business. Our unique culture of continuous improvement is based on trusting the tools, empowering the team and moving forward, and is kept alive by our more than 14,000 associates across 20 plus manufacturing facility and offices. Visit ******************* to learn more and join us in building great experiences together! Equal Employment Opportunity MasterBrand Cabinets LLC is an equal opportunity employer. MasterBrand Cabinets LLC's policy is not to discriminate against any applicant or employee based on race, color, religion, sex, gender identity or expression, national origin, ancestry, age, disability/handicap status, marital status, military status, sexual orientation, genetic history or information, or any other basis protected by federal, state or local laws. MasterBrand Cabinets LLC also prohibits harassment of applicants or employees based on any of these protected categories. It is also MasterBrand Cabinets LLC's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Reasonable Accommodations MasterBrand Cabinets LLC is committed to working with and providing reasonable accommodations to individuals with disabilities. If you have a disability and wish to discuss potential accommodations related to applying for employment, please contact us at [email protected] .

Responsible to perform laboratory testing assigned to the department. Maintain knowledge of all current Standard Operating Procedures (SOPs) required to perform effectively. Maintain excellent communication with the Department and other Laboratory Services personnel. Competently perform all assigned departmental duties. May perform Pre-Analytical tasks [receipt, qualification, and preparation of samples for testing], CLIA waived tests, and moderate and/or high complexity testing on patient, donors, or biologic products using routine chemistries utilizing automated / semi-automated methods with internal support systems. Recognize and report unusual test results in a timely manner to appropriate management. Operate equipment utilizing established protocols and within quality control limits. Recognize equipment malfunctions and/or technical problems and take appropriate steps to resolve. Maintain strict adherence to Standard Operating Procedures (SOPs). Prepare and maintain reports/records and perform computer data entry. Maintain departmental supplies within established inventory levels. Additional Skills & Qualifications * Requires BS degree in Life Science discipline * 0-1 years of laboratory experience within academic or industry Job Type & Location This is a Contract position based out of Norcross, GA. Pay and Benefits The pay range for this position is $21.00 - $21.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Norcross,GA. Application Deadline This position is anticipated to close on Jan 29, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Join our team to play a pivotal role in mitigating tech risks and upholding operational excellence, driving innovation in risk management. As a Tech Risk & Controls Lead in the Cybersecurity and Technology Controls organization, you will be responsible for identifying, and mitigating compliance and operational risks in line with the firm's standards. You will also provide subject matter expertise and technical guidance to technology-aligned process owners, ensuring that implemented controls are operating effectively and in compliance with regulatory, legal, and industry standards. By partnering with various stakeholders, including Product Owners, Business Control Managers, and Regulators, you will contribute to the reporting of a comprehensive view of technology risk posture and its impact on the business. Your advanced knowledge of risk management principles, practices, and theories will enable you to drive innovative solutions and effectively manage a diverse team in a dynamic and evolving risk landscape. Job responsibilities Drives efficient and effective execution of assessments, ensuring alignment with organizational objectives, risk appetite, and regulatory compliance Leads the governance of issues raised from assessments, tracking concerns, and resolution of findings Ensures timely and effective closure of identified control deficiencies Provides subject matter expertise in regulatory assessments, ensuring that the organization adheres to applicable frameworks such as HITRUST and other relevant standards Ensures effective identification, quantification, communication, and management of technology risk, focusing on root cause analysis and resolution recommendations Develops and maintains robust relationships, becoming a trusted partner with LOB technologists, assessments teams, and data officers to facilitate cross-functional collaboration and progress toward shared goals Executes reporting and governance of controls, policies, issue management, and measurements, offering senior management insights into control effectiveness and inform governance work Proactively monitors and evaluate control effectiveness, identify gaps, and recommend enhancements to strengthen risk posture and regulatory compliance Required qualifications, capabilities, and skills 5+ years of experience or equivalent expertise in technology risk management, information security, or related field, emphasizing risk identification, assessment, and mitigation Experience with risk management frameworks such as HITRUST, HIPAA, FedRAMP and financial industry regulatory requirements (SOX, PCI, ISO 270001, NIST, GLBA, NYDFS) Proficient knowledge and expertise in data security, risk assessment & reporting, control evaluation, design, and governance, with a proven record of implementing effective risk mitigation strategies Demonstrated ability to influence executive-level strategic decision-making and translating technology insights into business strategies for senior executives Preferred qualifications, capabilities, and skills CISM, CRISC, CISSP, or similar industry-recognized risk and risk certifications are preferred

Job Description Who is Habasit? Habasit is the global leader in the manufacturing of lightweight conveyor belting. Our slogan “Solutions in Motion” defines us; we are a provider of world class power-transmission and conveying solutions. At Habasit, we understand that a global leader is only as good as the people who represent it, and we are always searching for the right people to keep us in motion. We are looking for ambitious individuals, leaders, and students who are ready to help move us forward. If you have a can-do attitude and want to join a world-class organization, read on and apply today! SUMMARY The Quality Technician is primarily responsible for managing and driving root cause and corrective actions within the manufacturing & business environment. This role ensures that product and process nonconformities are properly investigated, documented, and resolved in compliance with company procedures. The Quality Technician partners with cross-functional teams to identify root causes, implement effective solutions, and monitor results to prevent recurrence. This role is ideal for someone who thrives on problem-solving, compliance, and driving accountability across teams. Things you should know about Habasit's opportunities: Direct hire opportunity Eligible for bonuses and incentives $500 bonus after 90 days of employment $500 additional bonus after 180 days of employment $1000 additional bonus after 365 days of employment $750 referral bonus after 6 months Basic Qualifications Must be 18 years of age Must be cleared on any background screening English literacy Ability to use a calculator and a tape measure. Computer skills a plus Must be able to lift up to 40 pounds. Must be able to stand, walk, sit; use hands and fingers to handle or feel; and reach with hands and arms. Why should you join our team? Our amazing environment keeps safety as its top priority! You can enjoy a collaborative atmosphere in a clean and climate-controlled facility. Our core values are how we thrive, and you will get to work with people who share them: Organizational Pride, Highest Ethical Standards, Quality You Can Trust, Collaboration, Entrepreneurship, and Continuous Improvement. Our opportunities to advance give any qualified associate the opportunity to move to a higher level job. Our on-the-job training and skills development will ensure your success in your job. If you are interested in becoming a part of a World-Class Team, submit your application today! ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Coordinate and oversee corrective and preventive action activities across manufacturing operations. Track, document, and maintain corrective action records in accordance with company requirements. Ensure timely closure of corrective action tasks and verify effectiveness of solutions. Lead investigations into product or process non-conformances. Facilitate problem-solving sessions using tools such as 5 Whys, Fishbone Diagrams, and FMEA. Collaborate with engineering, production, and quality teams to identify systemic issues. Create or revise work instructions or procedures to support improvement actions. Technical writing ability and knowledge of document & configuration control. Prepare reports and summaries of corrective action status. Support internal and external audits by providing corrective action documentation and objective evidence. Recommend process improvements to reduce defects, scrap, and rework. Provide training and guidance to employees on corrective action and best practices. Monitor trends in non-conformances and proactively address recurring issues. Perform quality system and process audits. Perform product inspections and nonconformance dispositions. Experience with QT9 QMS a plus. All other relevant duties as assigned by supervisor QUALIFICATIONSTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Additionally, the Quality Technician must have proven root cause problem-solving experience, attention to detail & documentation accuracy; cross-functional collaboration & analytical thinking with a continuous improvement mindset. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions RESPONSIBILITIES OF THIS POSITION: 3-5 years of experience in manufacturing quality assurance or corrective action coordination. Strong knowledge of CAPA processes, ISO 9001, Lean, and Six Sigma methodologies. Excellent organizational, communication, and facilitation skills. Proficiency in quality tools and software for managing & tracking corrective actions & tasks. Ability to assess adequacy of objective evidence to approve and close corrective actions. Strong knowledge of ISO 9001, Lean Manufacturing, and Six Sigma principles. Excellent leadership, communication, and problem-solving skills. Proficiency in quality tools (SPC, FMEA, control plans, etc.) Working experience with Microsoft programs: MS Word, Power Point, Visio, Excel, Outlook. Strong aptitude for learning software and managing data. Demonstrated people and leadership skills, including conflict resolution, problem solving, and performance management. Excellent organizational skills, attention to detail, and the ability to work with staff from diverse disciplines and backgrounds. Other duties as assigned PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand. The employee frequently is required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to walk and sit. The employee is occasionally required to stand, stoop and/or kneel. The employee must regularly lift and/or move up to 25 pounds and occasionally lift and/or move up to 60 pounds, with assistance if necessary. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Daily - 8:00AM-5:00PM - Monday through Friday

Organizational Relationship: reports directly to the Quality Supervisor Skills, Knowledge and Abilities: • Ability to apply and interpret statistical data • Computer skills (Word, Excel, and PowerPoint) required • Must be a team player with strong written and verbal communication skills • Must have the ability to actively initiate, lead, and participate in problem solving activities • Must be able to give candid feedback and report findings of non-compliance • Ability to maintain the professional competence, knowledge, and skill necessary for the satisfactory performance of all assigned responsibilities • Two years' experience within a manufacturing environment preferred Description of Duties: • Actively participate in the Layered Process Audits and work towards resolution of open items • Interacts with Group Leaders, Team Leaders, and Engineering in the identification and resolution of product quality problems • Interacts with internal and external customers to resolve quality problems • Lead and record activities for Quality Round Table meetings (Bi-Weekly) • Periodically review specifications and Standard Operating Sheets (SOS) etc. for accuracy and revisions • Support Operations employees as needed to interpret specifications and solve problems • Support the Jackson Quality Department by performing tasks to ensure compliance and initiate continuous improvement of the system • Provide accurate information and feedback to all Business Units and Jackson Operations Leadership Team • Provide training/coaching on quality related issues to Jackson production associates and management • Participate in Kaizen improvement events as required • All other duties as may be assigned at management's discretion Additional Information For nearly 70 years, MasterBrand has been shaping the places where people come together, enriching lives and creating meaningful memories for our customers. That, combined with our stylish products, expansive dealer and retail network, and dedicated associates, has helped make us the number one North American residential cabinet business. Our unique culture of continuous improvement is based on trusting the tools, empowering the team and moving forward, and is kept alive by our more than 14,000 associates across 20 plus manufacturing facility and offices. Visit ******************* to learn more and join us in building great experiences together! Equal Employment Opportunity MasterBrand Cabinets LLC is an equal opportunity employer. MasterBrand Cabinets LLC's policy is not to discriminate against any applicant or employee based on race, color, religion, sex, gender identity or expression, national origin, ancestry, age, disability/handicap status, marital status, military status, sexual orientation, genetic history or information, or any other basis protected by federal, state or local laws. MasterBrand Cabinets LLC also prohibits harassment of applicants or employees based on any of these protected categories. It is also MasterBrand Cabinets LLC's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Reasonable Accommodations MasterBrand Cabinets LLC is committed to working with and providing reasonable accommodations to individuals with disabilities. If you have a disability and wish to discuss potential accommodations related to applying for employment, please contact us at [email protected].

+ Responsible to perform laboratory testing assigned to the department. + Maintain knowledge of all current Standard Operating Procedures (SOPs) required to perform effectively. + Maintain excellent communication with the Department and other Laboratory Services personnel. + Competently perform all assigned departmental duties. May perform Pre-Analytical tasks (receipt, qualification, and preparation of samples for testing), CLIA waived tests, and moderate and/or high complexity testing on patient, donors, or biologic products using routine chemistries utilizing automated / semi-automated methods with internal support systems. + Recognize and report unusual test results in a timely manner to appropriate management. + Operate equipment utilizing established protocols and within quality control limits. + Recognize equipment malfunctions and/or technical problems and take appropriate steps to resolve. + Maintain strict adherence to Standard Operating Procedures (SOPs). + Prepare and maintain reports/records and perform computer data entry. + Maintain departmental supplies within established inventory levels. Additional Skills & Qualifications + Requires BS degree in Life Science discipline + 0-1 years of laboratory experience within academic or industry Job Type & Location This is a Contract position based out of Norcross, GA. Pay and Benefits The pay range for this position is $21.00 - $21.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Norcross,GA. Application Deadline This position is anticipated to close on Jan 29, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

Join our team to play a pivotal role in mitigating tech risks and upholding operational excellence, driving innovation in risk management. As a Tech Risk & Controls Lead in Global Technology, Tech Risks and Controls, you will contribute to the successful management of technology-aligned aspects of Governance, Risk, and Compliance in line with the firm's standards. Leverage your broad knowledge in risk management principles and practices to assess and monitor risks and implement effective controls. Your role in risk identification, control evaluation, and security governance is crucial in advising on complex situations and enhancing the firm's risk posture. Through collaboration and analytical skills, you will contribute to the overall success of the Technology Risk & Services team and ensure compliance with regulatory obligations and industry standards. Job responsibilities Assess and monitor technology risks, ensuring compliance with firm standards, regulatory requirements, and industry best practices Lead all aspects of our SOX program relating to IT general and applications controls, including annual and ongoing risk assessments, facilitation of walkthroughs and overseeing the documentation and testing of applicable controls Support implementation of effective controls in collaboration with cross-functional teams and stakeholders Evaluate the effectiveness of existing controls, identify gaps, and recommend improvements to mitigate risks and enhance the firm's risk posture Analyze complex situations, provide advice on risk management strategies, and support the implementation of risk mitigation measures Collaborate directly with the External Auditors on the scoping and execution of all IT components of the SOX program, including the evolution of compliance requirements based on PCAOB or firm mandates Drive initiatives to improve the SOX program and promote efficiencies, improving governance and structure for audit processes and deliverable Required qualifications, capabilities, and skills 3+ years of experience or equivalent expertise in technology risk management, information security, or a related field, with a focus on risk identification, assessment, and mitigation Experience in risk identification, assessment, and control evaluation, with a strong understanding of industry standards Demonstrated ability to analyze complex issues, develop and implement risk mitigation strategies, and communicate effectively with senior stakeholders Proficient knowledge of risk management frameworks, regulations, and industry best practices Strong understanding of the Sarbanes-Oxley Act, the 2013 COSO framework, NIST, COBIT, SOC, DCAM, and SEC guidance for management's assessment of internal controls over financial reporting Demonstrated ability to apply IT-related knowledge and experience in solving compliance issues Preferred qualifications, capabilities, and skills CISM, CRISC, CISSP, or other industry-recognized risk and risk certifications preferred Experience with cloud products, i.e. Azure, AWS, Google cloud, etc. Well-developed communication and presentation skills indicative of an ability to effectively present to and influence senior management and communicate with all levels of management in a decentralized environment Ability to influence, interact and partner effectively with multi-functional and remote teams

Who is Habasit? Habasit is the global leader in the manufacturing of lightweight conveyor belting. Our slogan “Solutions in Motion” defines us; we are a provider of world class power-transmission and conveying solutions. At Habasit, we understand that a global leader is only as good as the people who represent it, and we are always searching for the right people to keep us in motion. We are looking for ambitious individuals, leaders, and students who are ready to help move us forward. If you have a can-do attitude and want to join a world-class organization, read on and apply today! SUMMARY The Quality Technician is primarily responsible for managing and driving root cause and corrective actions within the manufacturing & business environment. This role ensures that product and process nonconformities are properly investigated, documented, and resolved in compliance with company procedures. The Quality Technician partners with cross-functional teams to identify root causes, implement effective solutions, and monitor results to prevent recurrence. This role is ideal for someone who thrives on problem-solving, compliance, and driving accountability across teams. Things you should know about Habasit's opportunities: Direct hire opportunity Eligible for bonuses and incentives $500 bonus after 90 days of employment $500 additional bonus after 180 days of employment $1000 additional bonus after 365 days of employment $750 referral bonus after 6 months Basic Qualifications Must be 18 years of age Must be cleared on any background screening English literacy Ability to use a calculator and a tape measure. Computer skills a plus Must be able to lift up to 40 pounds. Must be able to stand, walk, sit; use hands and fingers to handle or feel; and reach with hands and arms. Why should you join our team? Our amazing environment keeps safety as its top priority! You can enjoy a collaborative atmosphere in a clean and climate-controlled facility. Our core values are how we thrive, and you will get to work with people who share them: Organizational Pride, Highest Ethical Standards, Quality You Can Trust, Collaboration, Entrepreneurship, and Continuous Improvement. Our opportunities to advance give any qualified associate the opportunity to move to a higher level job. Our on-the-job training and skills development will ensure your success in your job. If you are interested in becoming a part of a World-Class Team, submit your application today! ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Coordinate and oversee corrective and preventive action activities across manufacturing operations. Track, document, and maintain corrective action records in accordance with company requirements. Ensure timely closure of corrective action tasks and verify effectiveness of solutions. Lead investigations into product or process non-conformances. Facilitate problem-solving sessions using tools such as 5 Whys, Fishbone Diagrams, and FMEA. Collaborate with engineering, production, and quality teams to identify systemic issues. Create or revise work instructions or procedures to support improvement actions. Technical writing ability and knowledge of document & configuration control. Prepare reports and summaries of corrective action status. Support internal and external audits by providing corrective action documentation and objective evidence. Recommend process improvements to reduce defects, scrap, and rework. Provide training and guidance to employees on corrective action and best practices. Monitor trends in non-conformances and proactively address recurring issues. Perform quality system and process audits. Perform product inspections and nonconformance dispositions. Experience with QT9 QMS a plus. All other relevant duties as assigned by supervisor QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Additionally, the Quality Technician must have proven root cause problem-solving experience, attention to detail & documentation accuracy; cross-functional collaboration & analytical thinking with a continuous improvement mindset. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions RESPONSIBILITIES OF THIS POSITION: 3-5 years of experience in manufacturing quality assurance or corrective action coordination. Strong knowledge of CAPA processes, ISO 9001, Lean, and Six Sigma methodologies. Excellent organizational, communication, and facilitation skills. Proficiency in quality tools and software for managing & tracking corrective actions & tasks. Ability to assess adequacy of objective evidence to approve and close corrective actions. Strong knowledge of ISO 9001, Lean Manufacturing, and Six Sigma principles. Excellent leadership, communication, and problem-solving skills. Proficiency in quality tools (SPC, FMEA, control plans, etc.) Working experience with Microsoft programs: MS Word, Power Point, Visio, Excel, Outlook. Strong aptitude for learning software and managing data. Demonstrated people and leadership skills, including conflict resolution, problem solving, and performance management. Excellent organizational skills, attention to detail, and the ability to work with staff from diverse disciplines and backgrounds. Other duties as assigned PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand. The employee frequently is required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to walk and sit. The employee is occasionally required to stand, stoop and/or kneel. The employee must regularly lift and/or move up to 25 pounds and occasionally lift and/or move up to 60 pounds, with assistance if necessary. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Daily - 8:00AM-5:00PM - Monday through Friday

Organizational Relationship: reports directly to the Quality Supervisor Skills, Knowledge, and Abilities: • Ability to apply and interpret statistical data • Computer skills (Word, Excel, and PowerPoint) required • Must be a team player with strong written and verbal communication skills • Must have the ability to actively initiate, lead, and participate in problem solving activities • Must be able to give candid feedback and report findings of non-compliance • Ability to maintain the professional competence, knowledge, and skill necessary for the satisfactory performance of all assigned responsibilities • Two years' experience within a manufacturing environment preferred Description of Duties: • Actively participate in the Layered Process Audits and work towards resolution of open items • Interacts with Group Leaders, Team Leaders, and Engineering in the identification and resolution of product quality problems • Interacts with internal and external customers to resolve quality problems • Lead and record activities for Quality Round Table meetings (Bi-Weekly) • Periodically review specifications and Standard Operating Sheets (SOS) etc. for accuracy and revisions • Support Operations employees as needed to interpret specifications and solve problems • Support the Jackson Quality Department by performing tasks to ensure compliance and initiate continuous improvement of the system • Provide accurate information and feedback to all Business Units and Jackson Operations Leadership Team • Provide training/coaching on quality related issues to Jackson production associates and management • Participate in Kaizen improvement events as required • All other duties as may be assigned at management's discretion All applicants must follow Job Posting instructions as stated in the job bidding policy. All applications must be provided to Human Resources by the deadline listed above. The successful applicant will be notified by his/her supervisor of the start date for the new assignment. Successful applicants will be evaluated during their first 5 days in the new position. If not capable of performing the new duties, they will be returned to either their previous job or any open position for which they qualify. Additional Information For nearly 70 years, MasterBrand has been shaping the places where people come together, enriching lives and creating meaningful memories for our customers. That, combined with our stylish products, expansive dealer and retail network, and dedicated associates, has helped make us the number one North American residential cabinet business. Our unique culture of continuous improvement is based on trusting the tools, empowering the team and moving forward, and is kept alive by our more than 14,000 associates across 20 plus manufacturing facility and offices. Visit ******************* to learn more and join us in building great experiences together! Equal Employment Opportunity MasterBrand Cabinets LLC is an equal opportunity employer. MasterBrand Cabinets LLC's policy is not to discriminate against any applicant or employee based on race, color, religion, sex, gender identity or expression, national origin, ancestry, age, disability/handicap status, marital status, military status, sexual orientation, genetic history or information, or any other basis protected by federal, state or local laws. MasterBrand Cabinets LLC also prohibits harassment of applicants or employees based on any of these protected categories. It is also MasterBrand Cabinets LLC's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Reasonable Accommodations MasterBrand Cabinets LLC is committed to working with and providing reasonable accommodations to individuals with disabilities. If you have a disability and wish to discuss potential accommodations related to applying for employment, please contact us at [email protected].