Quality assurance technician jobs in Beaumont, TX - 31 jobs

Job Description Thompson Engineering is a leader in delivering high-quality infrastructure and construction projects across the South. With a strong commitment to safety, quality, and client satisfaction, we are currently seeking a dedicated and experienced Civil QA/QC Inspector to join our growing team. The Civil QA/QC Inspector will oversee the quality assurance and quality control aspects of civil construction work including earthworks, concrete, asphalt, utilities, drainage, and structural components. The ideal candidate will be responsible for ensuring that all construction activities comply with applicable codes, standards, project specifications, and quality plans. The Ideal candidate must be willing to travel to support project needs. Essential Functions of the Position Conduct QA/QC inspections for all civil construction activities, including but not limited to earthwork, foundation, concrete placement, utilities, roadways, and structural components. Review and interpret project drawings, specifications, and quality requirements. Prepare and maintain daily inspection reports, test results, non-conformance reports (NCRs), and corrective action documentation. Monitor construction work to ensure compliance with approved inspection and test plans (ITPs). Coordinate with contractors, site engineers, consultants, and quality managers to address any quality-related issues. Verify materials and workmanship meet the project's approved submittals and standards. Attend quality and coordination meetings as needed. Ensure that all inspection and testing records are properly documented and archived. Support continuous improvement by identifying recurring quality issues and suggesting practical solutions. Minimum Requirements High School Diploma or GED required; Associate's or Bachelor's degree in Civil Engineering, Construction Management, or related field preferred. Minimum of [3-5] years of experience in civil construction QA/QC, preferably in infrastructure or large-scale projects. In-depth knowledge of industry standards and codes (ASTM, ACI, AASHTO, etc.). Experience reviewing and implementing Inspection and Test Plans (ITPs) and Quality Control Plans (QCPs). Familiarity with construction materials and laboratory/field testing procedures. Strong organizational and communication skills. Proficiency with Microsoft Office Suite and QA/QC reporting tools. Valid driver's license and the ability to travel to project sites. Preferred Certifications (Not Required, but a Plus): ACI Concrete Field Testing Technician - Grade I NICET Certification in Civil/Construction Inspection OSHA 10 or 30 Certification ISO 9001 Quality Management Systems knowledge QMS/QA-related training or certifications Physical Requirements Must be willing to work flexible schedules and overtime as needed by the department needs. Ability to lift and carry a minimum of 40 lbs. Drive a company vehicle in a safe manner Walk, stoop, bend, and climb up and down stairs and ladders Stand, walk and balance in irregular and uneven terrain and pavements, concrete, grass, dirt and gravel. Work in high grounds and high open buildings Work outside for extended periods in the heat and cold Ability to wear appropriate PPE for hazardous materials Ability to read and write in English About Thompson Engineering Thompson Engineering was established in 1953 in Mobile, Alabama. Since then, the company has grown to include multiple offices in states throughout the Southeast. Thompson Engineering is a subsidiary of Thompson Holdings, Inc. Our sister companies are Watermark Design Group, an architectural and interior design firm, and Thompson Consulting Services, a disaster recovery consulting firm. As a group, the three firms provide a broad range of architectural and engineering services. Thompson is an employee-owned firm with more than 300 personnel in multiple disciplines. Our staff has a vested interest in providing safe, quality driven, successful projects that are completed on time and within budget. Our business relies heavily on our performance and the repeat satisfaction of our customers. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

Job Description Job Title: Level II QC Technician Metalforms is committed to matching the needs of our customers with products and services which provide value and can help them conserve resources, improve environmental quality to increase production, reduce and avoid down time, and assist in the development of new products. This will be accomplished through design, fabrication, testing and maintenance of heat exchangers and related process equipment. At Metalforms, we provide our customers with a variety of services that have helped us to become one of the leading providers of heat transfer solutions along the Gulf Coast Region. Metalforms was recently acquired by TransTech Energy, a leading provider of custom-engineered and fabricated solutions for liquids and gas processing, storage, transfer, and utilization across a broad range of industries including energy, petrochemical, specialty chemical, renewables, biofuels, and a variety of industrial process industries. Job Summary The primary responsibilities of the Level II QC Technician are to perform shop work in the following Non-destructive Testing techniques: (MT) Magnetic Particle, (PT) Dye Penetrant, (VT) Visual Testing, and (UTT) Ultrasonic thickness testing Job Requirements High school diploma or GED required SNT-TC1A for one or all of the following (Magnetic Particle, Penetrant, or Ultrasonic testing) required Prior certification as an NDT Level II with 1 year experience or prior experience as an NDT Level I technician with adequate field experience hours to certify to level II per SNT-TC1A standards in all or one of the following (Magnetic Particle, Penetrant, or Ultrasonic testing). Must have the ability to perform a wide variety of tasks and respond to short-notice work assignments Must have the ability to adapt to an ever-changing schedule Must be able to read technical documents, blueprints, and engineering specifications Must be able to follow precise directions and procedures Benefits Designed to Work for You: Free HSA health plan or traditional PPO 401(k) with generous company match (Safe Harbor) Dental, vision, and optional coverage like accident & critical illness insurance HSA and FSA accounts to save on healthcare costs Company-paid Life, Long Term Disability, and AD&D insurance Confidential support for mental health, family matters, legal concerns, and more through our Employee Assistance Program Discounts on gyms, shopping & entertainment Health benefits kick in fast - first of the month after 30 days Time Off We offer a variety of paid time off options to support rest, wellness, and personal needs: Paid Time Off Paid Holidays Bereavement Leave This organization provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. #MetalForms

Job Title: Level II QC Technician Metalforms is committed to matching the needs of our customers with products and services which provide value and can help them conserve resources, improve environmental quality to increase production, reduce and avoid down time, and assist in the development of new products. This will be accomplished through design, fabrication, testing and maintenance of heat exchangers and related process equipment. At Metalforms, we provide our customers with a variety of services that have helped us to become one of the leading providers of heat transfer solutions along the Gulf Coast Region. Metalforms was recently acquired by TransTech Energy, a leading provider of custom-engineered and fabricated solutions for liquids and gas processing, storage, transfer, and utilization across a broad range of industries including energy, petrochemical, specialty chemical, renewables, biofuels, and a variety of industrial process industries. Job Summary The primary responsibilities of the Level II QC Technician are to perform shop work in the following Non-destructive Testing techniques: (MT) Magnetic Particle, (PT) Dye Penetrant, (VT) Visual Testing, and (UTT) Ultrasonic thickness testing Job Requirements High school diploma or GED required SNT-TC1A for one or all of the following (Magnetic Particle, Penetrant, or Ultrasonic testing) required Prior certification as an NDT Level II with 1 year experience or prior experience as an NDT Level I technician with adequate field experience hours to certify to level II per SNT-TC1A standards in all or one of the following (Magnetic Particle, Penetrant, or Ultrasonic testing). Must have the ability to perform a wide variety of tasks and respond to short-notice work assignments Must have the ability to adapt to an ever-changing schedule Must be able to read technical documents, blueprints, and engineering specifications Must be able to follow precise directions and procedures Benefits Designed to Work for You: Free HSA health plan or traditional PPO 401(k) with generous company match (Safe Harbor) Dental, vision, and optional coverage like accident & critical illness insurance HSA and FSA accounts to save on healthcare costs Company-paid Life, Long Term Disability, and AD&D insurance Confidential support for mental health, family matters, legal concerns, and more through our Employee Assistance Program Discounts on gyms, shopping & entertainment Health benefits kick in fast - first of the month after 30 days Time Off We offer a variety of paid time off options to support rest, wellness, and personal needs: Paid Time Off Paid Holidays Bereavement Leave This organization provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. #MetalForms

Job Description What you'll do: Operate manufacturing equipment that produces oriented strand board (OSB) Operate forklifts and other mobile equipment to manage product flow Perform regular preventive maintenance and clean-up on equipment Work safely and effectively in a team environment Problem solve and troubleshoot equipment and issues on a regular basis Involvement in ongoing process improvement in the work area Complete shift paperwork and recordkeeping Attend team meetings and regular training sessions Comply with all Company safety standards and protocols Other duties as assigned Education and Experience you will need: Eligible to legally work in the United States High School diploma or equivalent education Willing and able to work a 12-hour rotating schedule which will include nights, weekends and holidays Ability to work as part of a team and deliver value to the team Willingness and ability to cross-train to learn new jobs and skills Consistent, predictable attendance Outstanding benefits package including: Benefits starting Day 1 Competitive starting pay On-the-job training A culture that strongly believes in promoting from within Medical, Dental & Vision 401K with company match and additional retirement contribution Employee Stock Purchase Plan Life Insurance Disability Insurance Paid vacations and holidays Apply: If you are ready to build your career in a company that thrives on growth, a safe work environment, rewarding work, challenge, and opportunity, come build your career with us at West Fraser: ******************************************************** We thank all candidates for their interest; however, only those selected for an interview will be contacted. Please apply through our online application process. Be sure to attach your resume to your online profile as resumes will not be accepted at the site. No phone inquiries, please. West Fraser is a diversified wood products company producing lumber, OSB, LVL, MDF, plywood, pulp, newsprint, wood chips, and energy with over 60 facilities in Canada, the United States, and Europe. We are the largest lumber producer in North America, a leading global manufacturer of wood-based panels, and the world's largest producer of oriented strand board (OSB). We are a growing company, believe strongly in promoting from within, and pride ourselves on providing a challenging environment with continuous development. The successful candidate should be interested in future growth opportunities within the company. West Fraser is an Equal Opportunity Employer M/F/V/D & Drug-Free Workplace (DFW).

Who We Are Enovis Corporation (NYSE: ENOV) is an innovation-driven medical technology growth company dedicated to developing clinically differentiated solutions that generate measurably better patient outcomes and transform workflows. Powered by a culture of continuous improvement, global talent and innovation, the Company's extensive range of products, services and integrated technologies fuels active lifestyles in orthopedics and beyond. For more information about Enovis, please visit *************** What You'll Do At Enovis we pay attention to the details. We embrace collaboration with our partners and patients, and take pride in the pursuit of scientific excellence - with the goal of transforming medical technology as we know it. Because that's how we change the lives of patients for the better. And that's how we create better together. Why work at Enovis? See for yourself. As a key member of the Recovery Sciences team you will play an integral part in helping Enovis drive the medical technology industry forward through transforming patient care and creating better patient outcomes. Job Title: Laser Manufacturing Technician Reports To: Supervisor, Manufacturing Location: DFW Distribution Center Business Unit Description: Recovery Sciences Job Title/High-Level Position Summary: In this role the Laser Manufacturing Technician will be an indispensable partner with internal partners by performing moderate functions associated with a focused manufacturing or operations area. You will perform functions associated with all manufacturing operations, including testing, inspecting, and completing in-process products, assets, and finished goods. This will be accomplished by following and completing set test procedures. As well as packing out finished goods by following the bill of materials. You will also be responsible for working with QA to test, document, and report any quality related issues. Key Responsibilities: * Utilize a developing knowledge of operations principles and experience to perform duties that may include but are not limited to: * Inspection of medical lasers, medical devices, and accessories * Manufacturing/Kitting of medical lasers, and other medical devices * Transacting manufacturing orders and QA checks via an ERP system * Collaborate with QA to investigate, take samples, and document issues * Perform rework, repair and quality testing related to the production of parts, components, sub-assemblies and final assemblies * Use sophisticated programs to collect and evaluate operating data to conduct on-line adjustments to products, instruments or equipment * Assist with tests and experiments as directed * May operate and perform maintenance on equipment * Ability to understand quality methodologies * Sustain a safe and clean working environment * Understand and follow standard operating procedures (SOPs) * May develop processing schedules for related operations * Collaborate with various functions and levels throughout the organization * Other duties determined by direct supervisor as seen necessary * Currently, Enovis does not provide sponsorship for employment visas (e.g., H-1B) and will not offer such sponsorship in the future. Applicants must already have full-time work authorization in the United States, both now and in the future, without requiring sponsorship. Minimum Basic Qualifications: To perform this job successfully, an individual must be able to perform essential duties satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. * High School Diploma / GED Or a minimum of 4 years of production or testing experience * General computer and Microsoft Office knowledge Work environment | Physical demands: * Climate controlled work environment * Benchtop work environment * Exerting up to 75 pounds of force occasionally and/ or up to 20 pounds of force constantly to move objects * The ability to work with and assemble small objects and component parts * Must have excellent visual acuity Desired Characteristics: * Associate degree * Production or testing experience * ERP Software experience * Mechanical Aptitude * Detail oriented "Creating better together". It's the Enovis purpose, and it's what drives us and empowers us every day on a global scale. We know that the power to create better - for our customers, our team members, and our shareholders - begins with having the best team, pursuing common goals, operating at the highest levels, and delivering extraordinary outcomes. What does creating better together mean to us at Enovis? Discover the "why" behind our purpose, values and behaviors: Our Enovis Purpose, Values and Behaviors on Vimeo We offer a comprehensive benefits package which includes: * Medical Insurance * Dental Insurance * Vision Insurance * Spending and Savings Accounts * 401(k) Plan * Vacation, Sick Leave, and Holidays * Income Protection Plans * Discounted Insurance Rates * Legal Services ABOUT ENOVIS Enovis Corporation (NYSE: ENOV) is an innovation-driven medical technology growth company dedicated to developing clinically differentiated solutions that generate measurably better patient outcomes and transform workflows. Powered by a culture of continuous improvement, global talent and innovation, the Company's extensive range of products, services and integrated technologies fuels active lifestyles in orthopedics and beyond. Visit ************** to learn more. EQUAL EMPLOYMENT OPPORTUNITY: Enovis provides equal employment opportunities based on merit, experience, and other work-related criteria and without regard to race, color, ethnicity, religion, national origin, sex, age, pregnancy, disability, veteran status, or any other status protected by applicable law. We also strive to provide reasonable accommodation to employees' beliefs and practices that do not conflict with Enovis policies and applicable law. We value the unique contributions that every employee brings to their role with Enovis. #LI-RC2 EOE AA M/F/VET/Disability Statement All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, religion, color, national origin, sex, protected veteran status, disability, or any other basis protected by federal, state or local laws.

**QA/QC Inspectors- Orange Texas - Orange, Texas (Job Number: 197359)** **The future you want is within reach.** At PCL, we build the places where life happens and find camaraderie in the process. We're a community of builders committed to building better communities. That's why we're always looking ahead, and not just to the next project or what's next in our industry. We're also looking at what's next for you and we can help you build a career you're proud of. As a **QA/QC** **Inspector** for our **GTPP** **Project in Orange, Texas** you will contribute to our team by: + Review prime contract and subcontract details for specifications and requirements. + Conduct quality activities aligned with project scope as per the contract terms and conditions. + Review the project specifications and identifies quality requirements. + Perform visual examination, witnesses, monitors and document as per project quality and inspection testing plans (ITPs) + Observe functioning of installed equipment or systems to determine hazards and need for adjustments, relocation, or replacements (IND). + Produces and/or collects quality turnover documentation. + Act as liaison with craft personnel to broaden technical knowledge. + Completes documentation of mock-ups (BLDG) + Works with field management to ensure the protection of finished work. + Constant Walking and Climbing throughout the day. + Knowledge of Structural Steel Connections along with Welding inspections + Other duties required. What you will bring to the role: + Minimum of 5-10 years of experience in quality control relative to heavy industrial construction. + basic knowledge of construction industry, understands specifications, methods and procedures. + Proficient knowledge of codes related to Industrial Construction. + basic construction inspection skills + strong attention to detail + excellent record keeping skills. + effective verbal and writing communication skills. + **Must have current AWS QC-1 CWI Certification** **Resumes and interview by QC Manager on site** PCL is an innovative, safety-oriented company comprised of people who find passion in their profession and take pride in doing great work every day. Our work powers the infrastructure and utilities that are essential to daily life and our projects are the scene of vacations, careers, education and healing. We are consistently ranked among the best companies to work for because we are committed to supporting and developing our teams. The PCL Companies celebrate diversity and are proud to be an equal opportunity employer. We are committed to creating equitable opportunities and an inclusive environment for all employees and applicants. We make employment-related decisions without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, age, disability or veteran status. Should you require an accommodation during the application process, please contact us at *************** with the position and location you are interested in. Together, we can build success and a better future. Let's get started! **Company:** PCL Industrial Construction Co. **Job Posting:** Jan 15, 2026 **Closing Date:** Ongoing **Primary Location:** United States-Texas-Orange

Production Technician-25002185 Description Job Overview:The LGUS HyCO division of Linde, Inc. is currently seeking a Production Technician in Liberty, TX. The production technician, working under the direction of lead technicians and the facilities manager, has responsibility for supporting day-to-day operations at the Moss Bluff facility. The facility produces supports the hydrogen pipeline via hydrogen storage in a salt cavern and boosting capabilities, this site also runs and supports a PSA site in Baytown. In this role, you will be responsible for operating the equipment associated with PSA, compressors, dryers, Salt Caverns, and oil removal systems. Primary Responsibilities:Adjustments to process variables. Startup and shutdown of process equipment. Preparing equipment for maintenance work including lock-out tag-out. Correctly and safely permit maintenance work. Monitoring equipment performance. Responsibilities require 12-hour shift rotation, on-call, and scheduled overtime. Effectively communicate with fellow operators, technicians, engineers, and managers. Adhere to all Corporate and Plant policies. Maintain the highest degree of personal safety and environmental accountability at all times. Maintain high standards of housekeeping. Participate in daily and monthly safety and production meetings. Qualifications Qualifications:HS Diploma. Associate degree preferred. 2 years Production/Operations experience or equivalent industrial experience. Working extended hours and/or weekends, holidays and call-ins may be required. About Linde:Linde is a leading global industrial gases and engineering company with 2024 sales of $33 billion. We live our mission of making our world more productive every day by providing high-quality solutions, technologies and services which are making our customers more successful and helping to sustain and protect our planet. Culture:At Linde, we strive to create a work environment that treats all employees with respect, supports new thoughts and ideas, encourages growth and development, celebrates our differences, and embraces inclusion. Linde is committed to remaining an employer of choice for the diverse, ever-increasing pool of global talent. For more information about the company and its products and services, please visit www. linde. com. Benefits:Linde Gases US offers competitive compensation and an outstanding benefits package. Enjoy access to health, dental, disability, and life insurance, paid holidays and vacation, 401(k) matching, pension benefits, an employee discount program, and opportunities for educational and professional growth. Additional compensation may vary depending on the position and organizational level. Build your future with us while making an impact every day! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, pregnancy, sexual orientation, gender identity or expression, or any other reason prohibited by applicable law. #LI-PL1Primary Location Texas-LibertySchedule Full-time Job - OperationsUnposting Date Ongoing

Bilfinger is an international industrial services provider with a vision to be the No. 1 for its customers in enhancing efficiency and sustainability within the process industry. Bilfinger's comprehensive portfolio spans the entire value chain, from consulting & engineering to prefabrication & installation, access & insulation, and services that improve the asset performance of industrial plants. The company operates in three geography-based segments: Western Europe, Central Europe, and International, with primary activities in Europe, North America, and the Middle East. Its process industry customers come from markets such as chemicals & petrochemicals, energy, oil & gas, and pharma & biopharma. With over 32,000 employees, Bilfinger upholds the highest standards of safety and quality, generating revenue of more than €5 billion in the financial year 2024. To achieve its goals, Bilfinger has identified two strategic levers: enhancing Operational Excellence to boost internal efficiency, and Market Expansion to strengthen customer focus and establish Bilfinger as the preferred partner. Enterprise Mont Belvieu Job Summary: The Site Quality Inspector will report to the Site Quality Manager. Duties shall include but not limited to planning, coordination, and inspections to ensure continuous production of systems are consistent with established codes and standards. Must be a certified Welding Inspector (CWI) or an ASNT VT Level II with entry level or greater experience in Quality and inspection. Will be required to work in the office, plant operations or construction jobsite settings. Have a basic understanding of ASME BPVC, AWS D1.X, NBIC, and API codes. Also, be able to inspect no-welding work as required. Must learn and understand all safety hazards related to the work and learn to safely and effectively use or operate work related tools and equipment. Will be required to work in a plant operations or construction jobsite setting. Responsibilities: * Support the Bilfinger Quality Manual and related programs * Monitor all quality related activities on the project * Coordinate with Site Quality Manager for quality improvements * Coordinate NDE vendor activities * Complete site quality control instructions and action remedial responses * Verify that contractor quality requirements are specified to vendors and confirms contractor documentation submittals * Ensure that safety is adhered to at site * Ensure all technical documents relative to site quality control are current in status * Put test packages together for client * Provide inspection activity for in place products * Investigate and adjust customer issues regarding quality * Assist Construction as needed Qualifications: Physical * Must be able to lift up to 25 lbs., but may occasionally lift up to 50 lbs. * Hearing and comprehension is necessary for giving and receiving directions * Will need to perform sedentary to heavy work * Will operate office equipment of all types * Will operate inspection hand gages of all types * Climb and maintain balance on steel/wood framework, stairs, ladders and scaffolds * Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis * Position may require prolonged bending/twisting, walking, reaching overhead, squatting, sitting or standing and lifting * Must be able to manipulate and traverse uneven terrain, ladders, and multi-floor buildings with no elevator * Must be able to walk on uneven surfaces, muddy conditions, loose rock, loose/soft sand, etc. * Will be exposed to adverse weather conditions (Heat, Cold, Rain, Etc.) * Vision requirements include ability to pass a Jaeger 1 visual acuity test and color blind test * Ability to drive cars/trucks as needed Mental * Must have the ability to communicate effectively with management/ supervision * Talking and reading & writing comprehension is necessary for giving and receiving directions to perform work and/or safety policy * Ability to use math/complete calculations * Work at various tempos, and concentrate amid distractions * Decision making skills necessary * Detail-oriented; must be able to remember, examine, and observe details Other Requirements * Willing to acquire additional certifications as required * Computer literate with functional knowledge of Microsoft Office and Adobe * Must be willing to travel on short but reasonable notice * Must be able to work overtime as needed * Willing to accept short project assignments * Have or be able to obtain TWIC/TSA clearance * Have or be able to pass Basic Plus or equal safety training * Willing to learn and to assist with Bilfinger`s ASME/NBIC Code Stamp Program. Please reach out to Shondra White (***************************) in case of any questions related to this position. Bilfinger Inc is an Equal Opportunity Employer - M/F/Veterans/Disabled. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or other legally protected characteristics. This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including terminating your employment. Employers can only use E-Verify once you have accepted a job offer and completed the Form I-9. Fraudulent employment offers We are aware that fraudulent employment offers are being transmitted via email by people claiming to be employees or representatives of Bilfinger. Prospective candidates are provided job descriptions and employment letters and are asked to complete and return employment information forms as well as official tax forms. These job offers may look genuine and could include names of Bilfinger legal entities, Bilfinger executives, their signatures, seals of "authenticity", the Bilfinger brand and logo. Please be advised that these communications are FRAUDULENT and are NOT sent from anyone within or affiliated with Bilfinger. These email messages are a scam and should be treated as such. Bilfinger does not make job offers via social media, unsolicited email or without personally interviewing candidates first. We never send you cheques in order to pay contractors to set up a home office. Never send money or pass on personal details to anyone suggesting they can provide employment with Bilfinger, and never reply to an email address that does not end in @bilfinger.com. If you receive such a message, you are advised to contact your local law enforcement agency and provide any details you may have. You also may forward the messages to *********************************. If you are interested in an employment with Bilfinger, please submit your application in the safe environment of our global job portal only. Bilfinger Inc. HSEQ Permanent Skilled / Semi-skilled Bilfinger Office Nearest Major Market: Houston Job Segment: Welding Inspector, Sustainability, Help Desk, Information Technology, Welding, Manufacturing, Energy, Technology

Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Responsibilities for this position include the preparation and analysis of hazardous waste samples using standard EPA and ASTM methods. Responsible for following established laboratory QA/QC protocols as well as performing routine calculations and data entry. Laboratory Instruments and procedures employed may include: GC, GC/MS, ICAP, Mercury Vapor Analyzer, Ion Chromatography, Parr Bomb calorimeters, pH meters, TOC analyzers, balances and various wet chemistry procedures. Cleans and maintains instruments and work area. The position is working the afternoon schedule. Primary Duties /Responsibilities: Conduct all login procedures, both manual and electronic, of samples delivered to the laboratory, ensures proper labeling and paperwork. Sub-sample a variety of waste materials, process and product samples and follows proper analytical methods required for compliance in accordance with established guidelines and training. Conduct sample analysis on sub-samples per methods and procedures established by training and knowledge of analysis plans. Conducts QA/OC sample analysis and calibrations. Ensure proper written and electronic documentation of all test results including QA/QC and audit sample documents prior to approval and completeness of summarizing data. Notifies appropriate supervisor or staff member of completed analysis. Prepare reagent solutions, standards and other laboratory solutions as directed by supervisor or lead technician per guidance and training. Maintenance of analytical equipment and documents in accordance with quality assurance and control compliance. Gather appropriate paperwork for management approvals and notifies staff of any incomplete sections needing attention. Assists in compiling and reporting of analysis date including QA/QC data for review by staff. Perform periodic audits of analytical logs to ensure regulatory compliance for completeness and accuracy. Other duties as assigned. Work Environment: Spends 100% of the time in a lab or operations environment. Typically spends 10 - 20% of time exposed to outdoor and sometimes inclement weather. Company service vehicles are used as required. Possible Work Hazards: May be exposed to possible operations hazards including fumes, airborne particles, and noise, rotating machinery, high pressure, hot and cold temperatures, slippery surfaces, water and electrical hazards. Frequently exposed to toxic and caustic chemicals Physical Demands: Amount of time spent - Standing 50-75%, Sitting 25%, Walking 25%. Requires close visual and hearing observation. Taste and smell may be required for some tests. Constantly uses hands to finger, handle or feel and frequently reaches with hands and arms. Must be able to lift and carry 50 pounds distances of 10 feet. May lift up to 50-100 pounds on occasion. Occasional stooping, bending or kneeling, crouching, crawling, climbing, balancing and entering confined spaces. Close, distance, color and peripheral vision, depth perception and ability to adjust focus are special requirements. Personal Protective Equipment Required. Safety Glasses: Continuously Gloves: Continuously Hard Hat: Occasionally Clothing/Coveralls (Tyvek, Poly Coated Tyvek, etc.): Continuously Hearing Protection: Occasionally Respirator (Full Face): Frequently Steel-toed boots: Occasionally Powered Air Purifying Respirator (PAPR): NA Apron: Occasionally Self-Contained Breathing Apparatus (SCBA): NA Qualifications Education /Experience /Background: High School diploma or General Educational Development (GED) required Minimum of AA degree in Chemistry or equivalent laboratory experience required Bachelor's degree in science discipline with a working knowledge of Chemistry preferred 24 hour OSHA HAZWOPER training preferred. Knowledge /Skills /Abilities: Strong team player Excellent Interpersonal and communication skills Time management: the ability to organize and manage multiple deadlines Strong customer service orientation Required Certification /Licenses /Training: 24-Hour HAZWOPER Training Additional Information Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

SGS is the global leader and innovator in inspection, verification, testing and certification services. Founded in 1878, SGS is recognized as the global benchmark in quality and integrity. With over 97,000 employees in 130 countries and operating a network of more than 2,400 offices and laboratories, we provide services to almost every industry by assuring quality and safety of products and services. Trusted all over the world, SGS is a market leader because we put 100% passion, pride and innovation into everything we do. We encourage new ideas. We welcome people who challenge the way we do things. And we will be 100% committed to helping you reach your full potential. Summary Responsible for safely conducting analysis and reporting of various products, such as crude oil, fuel oils, middle distillates, petroleum and petrochemicals, LPG and LNG gases as well as lubricants for the Natural Resources and Industries and Environment sectors. Job Functions * Responsible for conducting laboratory analysis (hands on working on the bench). * Complete all laboratory reports as applicable. * Understand and keep current with all laboratory analysis methods. * Assist with the maintenance and calibration of equipment. * Understand and keep current with all laboratory safety and reporting techniques. * Adheres to internal standards, policies and procedures. * Prepare chemical solutions according to standard formulas. * Other duties as assigned. Qualifications Education and Experience * High School Diploma or GED (Required) * Associates Degree in a science discipline (Preferred) * 1-year experience working in a laboratory setting (Preferred) * For Crude Assay Technician: Previous experience in crude oil assay distillation per ASTM D2892 and ASTM D5236 (Preferred) Licenses and Certifications * N/A Knowledge, Skills and Abilities * Good organization skills, detailed oriented and completes tasks in a timely manner. (Required) * Able to work in a routine repetitive fast paced work environment (Required) * Able to stand on feet for long periods of time (Required) * Ability to interpret a variety of instructions as may be furnished in oral, written, diagram, electronic or schedule form. (Required) * Acts accordingly to the SGS standards of ethics and integrity (Required) * Must be able to work with all chemicals, petrochemicals and petroleum products. (Required) * For Crude Assay Technician: Possess working proficiency of ASTM D4052, D5002, D97, D5853, UOP 163, D4294; Understands and is able to read and interpolate applicable data and tables, interpret applicable graphs and control charts, complete laboratory raw data sheets, and is able to compute rates, ratio, percents and material quantities (linear, volumetric, weight, etc.); able to synthesize information from a variety of sources and evaluate relevance as pertains to crude assay trending properties. (Required) Physical Demands of the Job * Stand: Constantly * Move or traverse: Frequently * Sit: Occasionally * Use hands: Constantly * Reach with hands and arms: Constantly * Climb or balance: Occasionally * Stoop, kneel, crouch or crawl: Occasionally * Talk/hear: Constantly * Taste/Smell: Constantly * Lift/carry/push or pull: Occasionally 25 lbs Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.

** Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. **Job Description** **Position Purpose:** Responsibilities for this position include the preparation and analysis of hazardous waste samples using standard EPA and ASTM methods. Responsible for following established laboratory QA/QC protocols as well as performing routine calculations and data entry. Laboratory Instruments and procedures employed may include: GC, GC/MS, ICAP, Mercury Vapor Analyzer, Ion Chromatography, Parr Bomb calorimeters, pH meters, TOC analyzers, balances and various wet chemistry procedures. Cleans and maintains instruments and work area. The position is working the afternoon schedule. **Primary Duties /Responsibilities:** + Conduct all login procedures, both manual and electronic, of samples delivered to the laboratory, ensures proper labeling and paperwork. + Sub-sample a variety of waste materials, process and product samples and follows proper analytical methods required for compliance in accordance with established guidelines and training. + Conduct sample analysis on sub-samples per methods and procedures established by training and knowledge of analysis plans. Conducts QA/OC sample analysis and calibrations. + Ensure proper written and electronic documentation of all test results including QA/QC and audit sample documents prior to approval and completeness of summarizing data. Notifies appropriate supervisor or staff member of completed analysis. + Prepare reagent solutions, standards and other laboratory solutions as directed by supervisor or lead technician per guidance and training. + Maintenance of analytical equipment and documents in accordance with quality assurance and control compliance. + Gather appropriate paperwork for management approvals and notifies staff of any incomplete sections needing attention. Assists in compiling and reporting of analysis date including QA/QC data for review by staff. + Perform periodic audits of analytical logs to ensure regulatory compliance for completeness and accuracy. + Other duties as assigned. **Work Environment:** Spends 100% of the time in a lab or operations environment. Typically spends 10 - 20% of time exposed to outdoor and sometimes inclement weather. Company service vehicles are used as required. **Possible Work Hazards:** May be exposed to possible operations hazards including fumes, airborne particles, and noise, rotating machinery, high pressure, hot and cold temperatures, slippery surfaces, water and electrical hazards. Frequently exposed to toxic and caustic chemicals **Physical Demands:** + Amount of time spent - Standing 50-75%, Sitting 25%, Walking 25%. + Requires close visual and hearing observation. Taste and smell may be required for some tests. + Constantly uses hands to finger, handle or feel and frequently reaches with hands and arms. + Must be able to lift and carry 50 pounds distances of 10 feet. May lift up to 50-100 pounds on occasion. + Occasional stooping, bending or kneeling, crouching, crawling, climbing, balancing and entering confined spaces. + Close, distance, color and peripheral vision, depth perception and ability to adjust focus are special requirements. Personal Protective Equipment Required. Safety Glasses: Continuously Gloves: Continuously Hard Hat: Occasionally Clothing/Coveralls (Tyvek, Poly Coated Tyvek, etc.): Continuously Hearing Protection: Occasionally Respirator (Full Face): Frequently Steel-toed boots: Occasionally Powered Air Purifying Respirator (PAPR): NA Apron: Occasionally Self-Contained Breathing Apparatus (SCBA): NA **Qualifications** **Education /Experience /Background:** + High School diploma or General Educational Development (GED) required + Minimum of AA degree in Chemistry or equivalent laboratory experience required + Bachelor's degree in science discipline with a working knowledge of Chemistry preferred + 24 hour OSHA HAZWOPER training preferred. **Knowledge /Skills /Abilities:** + Strong team player + Excellent Interpersonal and communication skills + Time management: the ability to organize and manage multiple deadlines + Strong customer service orientation **Required Certification /Licenses /Training:** + 24-Hour HAZWOPER Training **Additional Information** **Benefits:** Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Core Laboratories is the Reservoir Optimization Company™ Core Laboratories Inc. is a leading provider of proprietary and patented reservoir description and production enhancement services and products used to optimize petroleum reservoir performance. The Company has over 70 offices in more than 50 countries and is located in every major oil-producing province in the world. We are well-positioned to serve the growing needs of the energy transition while continuing to fulfill the demand for reliable and affordable energy sources like crude oil and natural gas. Our services, products, expertise, and innovations will continue to be essential as our clients meet the growing demand for energy globally. For more information, visit *********************** At Core Lab, our values matter: Safety, Honesty and Integrity, Customer Focus, Building Trust, and Employee Development. We regard our employees as our greatest asset. We believe that identifying, attracting, developing, and retaining talent are significant actions because our people are so important. SUMMARY Performs routine laboratory tests under close supervision to determine chemical or physical characteristics designated by clients. DUTIES & RESPONSIBILITIES Read and understand all analysis and safety standards in English, including ASTM, UOP, IP and other well-defined analytical standards and procedures used in the laboratory. Assist senior laboratory personnel in setting up, adjusting and operating laboratory equipment for which the technician has been adequately trained and has been verified to operate correctly in accordance with applicable standards and sound laboratory practice. Assist in or perform basic analytical tests from well-defined standards and procedures as assigned by the Laboratory Manager. Laboratory technicians must be verified to be able to perform all tests in accordance with applicable standards and sound laboratory practice. Clean and sterilize laboratory equipment. Assist in calibrating laboratory instruments for which the technician has been adequately trained and has been verified to operate correctly in accordance with applicable standards and sound laboratory practice. Prepare chemical solutions according to standard formulas. Exercise procedural, safety and quality requirements specified in Laboratory Manual #5, Safety Manual #7, and the Core Laboratories Safety and Environmental Manual, and company policies. Attend training and pass appropriate examinations in petroleum, chemical and gas analysis, including Right-to-Know training, hazardous materials disposal, and other safety and compliance training required by applicable regulations. Understand and be able to complete laboratory raw data sheets and make accurate entries into laboratory computer programs. QUALIFICATIONS High school diploma or equivalent is required. Bachelor's degree preferred. Three to five years of related experience and/or training; or equivalent combination of education and experience. KNOWLEDGE, SKILLS & ATTRIBUTES Strong communication, presentation, and interpersonal skills. Ability to work independently and collaboratively in a fast-paced and dynamic environment. Proficient in Microsoft Office applications. OTHER INFORMATION (US ONLY) PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The Company requires laboratory technicians to meet the following physical qualifications Pass the drug and alcohol test specified for safety-sensitive employees. Be able to work in the presence of odors typical of petroleum or petrochemicals without allergic reactions or nausea when such odors are within OSHA-designated permissible exposure limits (PELs). While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel objects, tools, or controls; talk or hear; and test or smell. The employee frequently is required to walk, sit, and reach with hands and arms. The employee is occasionally required to stoop, kneel, crouch, or crawl. Laboratory personnel must regularly lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may be exposed to fumes, airborne particles, and toxic or caustic chemicals. The Company provides product information, training, engineering controls, and personal protective equipment in an effort to protect employees from exposure to potentially harmful levels of those materials. Employees are required to read product information, use available engineering controls, follow guidelines presented during training, and be able to wear and use appropriate protective equipment, including respiratory protective equipment, as may be required by the work environment. The noise level in the work environment is usually moderate. Core Laboratories, including all of its affiliated and related entities, is an equal opportunity employer and is committed to creating an inclusive environment for everyone. Employment decisions are made regardless of characteristics including, but not limited to, race, color, sex, sexual orientation, gender identity, national origin, age, disability, religion, genetic information, protected veteran or uniformed service member status, and any other characteristic protected under applicable law.

Job DescriptionDescription: About the Role We are seeking a motivated Entry-Level Laboratory Technician to join our team. In this role, you will perform laboratory tests that support production and ensure our products meet the highest quality standards. You'll gain hands-on experience with industry-standard testing methods (ASTM/ISO), work with advanced lab equipment, and play a key role in delivering safe, high-quality products to our customers. This is a great opportunity for individuals who are early in their career, with prior lab, manufacturing, or academic experience, and who want to grow with a trusted leader in high-performance roto molding materials, custom solutions, and real-world results. What You'll Do Perform chemical and physical laboratory testing and analysis to support production and quality assurance. Interpret test results, compile data, and communicate findings accurately and on time. Apply technical information, diagrams, and procedures related to test methods and standards (ASTM/ISO). Assist with the development of test methods, work instructions, and equipment calibration/maintenance. Monitor product quality to ensure compliance with specifications and standards. Operate lab equipment for specimen preparation and testing. Maintain accurate and organized records of testing activities. Contribute to certification and continuous improvement initiatives. Follow all corporate safety practices, including safe handling of hazardous materials and proper use of PPE. Support colleagues and collaborate across teams to achieve production and quality goals. Requirements: What We're Looking For 1-2 years of laboratory or manufacturing experience (academic or internship experience may be considered). Proficiency with Microsoft Office (Excel, Word, PowerPoint). Strong attention to detail with the ability to work accurately and thoroughly. Basic math skills and ability to analyze data to support decision-making. Ability to follow written, verbal, or diagram-based instructions. Team-oriented with a professional and proactive attitude. Reliable attendance and ability to manage multiple priorities. Flexibility to work overtime, weekends, and rotating shifts as needed. Work Environment & Physical Demands Ability to stand for extended periods (8-12 hours). Ability to lift 50 lbs. or more. Comfortable working with fiberglass and other potentially hazardous materials (with provided training and PPE). Willingness to undergo respiratory fit testing (where applicable). Ability to work in moderate-noise environments and areas without temperature control (warm conditions in summer months). Comfortable working at heights (up to 50 ft.).

Core Laboratories is the Reservoir Optimization Company Core Laboratories Inc. is a leading provider of proprietary and patented reservoir description and production enhancement services and products used to optimize petroleum reservoir performance. The Company has over 70 offices in more than 50 countries and is located in every major oil-producing province in the world. We are well-positioned to serve the growing needs of the energy transition while continuing to fulfill the demand for reliable and affordable energy sources like crude oil and natural gas. Our services, products, expertise, and innovations will continue to be essential as our clients meet the growing demand for energy globally. For more information, visit *********************** At Core Lab, our values matter: Safety, Honesty and Integrity, Customer Focus, Building Trust, and Employee Development. We regard our employees as our greatest asset. We believe that identifying, attracting, developing, and retaining talent are significant actions because our people are so important. SUMMARY Performs routine laboratory tests under close supervision to determine chemical or physical characteristics designated by clients. DUTIES & RESPONSIBILITIES * Read and understand all analysis and safety standards in English, including ASTM, UOP, IP and other well-defined analytical standards and procedures used in the laboratory. * Assist senior laboratory personnel in setting up, adjusting and operating laboratory equipment for which the technician has been adequately trained and has been verified to operate correctly in accordance with applicable standards and sound laboratory practice. * Assist in or perform basic analytical tests from well-defined standards and procedures as assigned by the Laboratory Manager. Laboratory technicians must be verified to be able to perform all tests in accordance with applicable standards and sound laboratory practice. * Clean and sterilize laboratory equipment. * Assist in calibrating laboratory instruments for which the technician has been adequately trained and has been verified to operate correctly in accordance with applicable standards and sound laboratory practice. * Prepare chemical solutions according to standard formulas. * Exercise procedural, safety and quality requirements specified in Laboratory Manual #5, Safety Manual #7, and the Core Laboratories Safety and Environmental Manual, and company policies. * Attend training and pass appropriate examinations in petroleum, chemical and gas analysis, including Right-to-Know training, hazardous materials disposal, and other safety and compliance training required by applicable regulations. * Understand and be able to complete laboratory raw data sheets and make accurate entries into laboratory computer programs. QUALIFICATIONS * High school diploma or equivalent is required. * Bachelor's degree preferred. * Three to five years of related experience and/or training; or equivalent combination of education and experience. KNOWLEDGE, SKILLS & ATTRIBUTES * Strong communication, presentation, and interpersonal skills. * Ability to work independently and collaboratively in a fast-paced and dynamic environment. * Proficient in Microsoft Office applications. OTHER INFORMATION (US ONLY) PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The Company requires laboratory technicians to meet the following physical qualifications * Pass the drug and alcohol test specified for safety-sensitive employees. * Be able to work in the presence of odors typical of petroleum or petrochemicals without allergic reactions or nausea when such odors are within OSHA-designated permissible exposure limits (PELs). * While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel objects, tools, or controls; talk or hear; and test or smell. The employee frequently is required to walk, sit, and reach with hands and arms. The employee is occasionally required to stoop, kneel, crouch, or crawl. * Laboratory personnel must regularly lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * While performing the duties of this job, the employee may be exposed to fumes, airborne particles, and toxic or caustic chemicals. The Company provides product information, training, engineering controls, and personal protective equipment in an effort to protect employees from exposure to potentially harmful levels of those materials. Employees are required to read product information, use available engineering controls, follow guidelines presented during training, and be able to wear and use appropriate protective equipment, including respiratory protective equipment, as may be required by the work environment. * The noise level in the work environment is usually moderate. Core Laboratories, including all of its affiliated and related entities, is an equal opportunity employer and is committed to creating an inclusive environment for everyone. Employment decisions are made regardless of characteristics including, but not limited to, race, color, sex, sexual orientation, gender identity, national origin, age, disability, religion, genetic information, protected veteran or uniformed service member status, and any other characteristic protected under applicable law.

The QC Assistant will be responsible for scrubbing test/turnover packages to ensure accuracy and completeness while also maintaining a meticulous record of check sheets for tracking and release purposes. This role plays a crucial part in our commitment to maintaining high-quality standards in our operations. Responsibilities: Review test/turnover packages, including documentation, reports, and records, for accuracy and completeness. Identify discrepancies, errors, or missing information and collaborate with relevant teams to address and rectify issues promptly. Ensure compliance with established quality control procedures and industry standards. Maintain a systematic and organized approach to document verification and correction. Establish and maintain a comprehensive tracking system for all check sheets associated with quality control processes. Record and categorize check sheets, assigning unique identifiers and dates for easy retrieval. Monitor the status of check sheets and facilitate their release according to company protocols. Collaborate with project teams to ensure timely access to required documentation. Communicate effectively with project managers, engineers, and other relevant stakeholders to address document-related issues. Prepare regular reports on the status of test/turnover packages and check sheet tracking/release activities. Assist in preparing documentation for audits and inspections as necessary. Assist in maintaining a clean and organized workspace conducive to efficient quality control operations. Support the Quality Control Supervisor/Manager in implementing process improvements and best practices. Education and Experience: High school diploma or equivalent; additional education or certification in quality control or a related field is a plus. Proficiency in using computer software for data entry and record-keeping. Effective communication skills, both written and verbal. Ability to work independently with minimal supervision and as part of a team. Knowledge of industry-specific quality control standards and regulations is an advantage. Physical Requirements: Ability to reach, stand, walk, finger, grasp, feel, talk, hear, see and to perform repetitive motions. Sedentary work: Exerting up to 10 lbs. of force occasionally and/or a negligible amount of force frequently or constantly to lift, carry, push, pull or otherwise move objects, including the human body. Sedentary work involves sitting most of the time. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Thompson Engineering is a leader in delivering high-quality infrastructure and construction projects across the South. With a strong commitment to safety, quality, and client satisfaction, we are currently seeking a dedicated and experienced Civil QA/QC Inspector to join our growing team. The Civil QA/QC Inspector will oversee the quality assurance and quality control aspects of civil construction work including earthworks, concrete, asphalt, utilities, drainage, and structural components. The ideal candidate will be responsible for ensuring that all construction activities comply with applicable codes, standards, project specifications, and quality plans. The Ideal candidate must be willing to travel to support project needs. Essential Functions of the Position * Conduct QA/QC inspections for all civil construction activities, including but not limited to earthwork, foundation, concrete placement, utilities, roadways, and structural components. * Review and interpret project drawings, specifications, and quality requirements. * Prepare and maintain daily inspection reports, test results, non-conformance reports (NCRs), and corrective action documentation. * Monitor construction work to ensure compliance with approved inspection and test plans (ITPs). * Coordinate with contractors, site engineers, consultants, and quality managers to address any quality-related issues. * Verify materials and workmanship meet the project's approved submittals and standards. * Attend quality and coordination meetings as needed. * Ensure that all inspection and testing records are properly documented and archived. * Support continuous improvement by identifying recurring quality issues and suggesting practical solutions. Minimum Requirements * High School Diploma or GED required; Associate's or Bachelor's degree in Civil Engineering, Construction Management, or related field preferred. * Minimum of [3-5] years of experience in civil construction QA/QC, preferably in infrastructure or large-scale projects. * In-depth knowledge of industry standards and codes (ASTM, ACI, AASHTO, etc.). * Experience reviewing and implementing Inspection and Test Plans (ITPs) and Quality Control Plans (QCPs). * Familiarity with construction materials and laboratory/field testing procedures. * Strong organizational and communication skills. * Proficiency with Microsoft Office Suite and QA/QC reporting tools. * Valid driver's license and the ability to travel to project sites. Preferred Certifications (Not Required, but a Plus): * ACI Concrete Field Testing Technician - Grade I * NICET Certification in Civil/Construction Inspection * OSHA 10 or 30 Certification * ISO 9001 Quality Management Systems knowledge * QMS/QA-related training or certifications Physical Requirements * Must be willing to work flexible schedules and overtime as needed by the department needs. * Ability to lift and carry a minimum of 40 lbs. * Drive a company vehicle in a safe manner * Walk, stoop, bend, and climb up and down stairs and ladders * Stand, walk and balance in irregular and uneven terrain and pavements, concrete, grass, dirt and gravel. * Work in high grounds and high open buildings * Work outside for extended periods in the heat and cold * Ability to wear appropriate PPE for hazardous materials * Ability to read and write in English About Thompson Engineering Thompson Engineering was established in 1953 in Mobile, Alabama. Since then, the company has grown to include multiple offices in states throughout the Southeast. Thompson Engineering is a subsidiary of Thompson Holdings, Inc. Our sister companies are Watermark Design Group, an architectural and interior design firm, and Thompson Consulting Services, a disaster recovery consulting firm. As a group, the three firms provide a broad range of architectural and engineering services. Thompson is an employee-owned firm with more than 300 personnel in multiple disciplines. Our staff has a vested interest in providing safe, quality driven, successful projects that are completed on time and within budget. Our business relies heavily on our performance and the repeat satisfaction of our customers. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Responsibilities for this position include the preparation and analysis of hazardous waste samples using standard EPA and ASTM methods. Responsible for following established laboratory QA/QC protocols as well as performing routine calculations and data entry. Laboratory Instruments and procedures employed may include: GC, GC/MS, ICAP, Mercury Vapor Analyzer, Ion Chromatography, Parr Bomb calorimeters, pH meters, TOC analyzers, balances and various wet chemistry procedures. Cleans and maintains instruments and work area. The position is working the afternoon schedule. Primary Duties /Responsibilities: Conduct all login procedures, both manual and electronic, of samples delivered to the laboratory, ensures proper labeling and paperwork. Sub-sample a variety of waste materials, process and product samples and follows proper analytical methods required for compliance in accordance with established guidelines and training. Conduct sample analysis on sub-samples per methods and procedures established by training and knowledge of analysis plans. Conducts QA/OC sample analysis and calibrations. Ensure proper written and electronic documentation of all test results including QA/QC and audit sample documents prior to approval and completeness of summarizing data. Notifies appropriate supervisor or staff member of completed analysis. Prepare reagent solutions, standards and other laboratory solutions as directed by supervisor or lead technician per guidance and training. Maintenance of analytical equipment and documents in accordance with quality assurance and control compliance. Gather appropriate paperwork for management approvals and notifies staff of any incomplete sections needing attention. Assists in compiling and reporting of analysis date including QA/QC data for review by staff. Perform periodic audits of analytical logs to ensure regulatory compliance for completeness and accuracy. Other duties as assigned. Work Environment: Spends 100% of the time in a lab or operations environment. Typically spends 10 - 20% of time exposed to outdoor and sometimes inclement weather. Company service vehicles are used as required. Possible Work Hazards: May be exposed to possible operations hazards including fumes, airborne particles, and noise, rotating machinery, high pressure, hot and cold temperatures, slippery surfaces, water and electrical hazards. Frequently exposed to toxic and caustic chemicals Physical Demands: Amount of time spent - Standing 50-75%, Sitting 25%, Walking 25%. Requires close visual and hearing observation. Taste and smell may be required for some tests. Constantly uses hands to finger, handle or feel and frequently reaches with hands and arms. Must be able to lift and carry 50 pounds distances of 10 feet. May lift up to 50-100 pounds on occasion. Occasional stooping, bending or kneeling, crouching, crawling, climbing, balancing and entering confined spaces. Close, distance, color and peripheral vision, depth perception and ability to adjust focus are special requirements. Personal Protective Equipment Required. Safety Glasses: Continuously Gloves: Continuously Hard Hat: Occasionally Clothing/Coveralls (Tyvek, Poly Coated Tyvek, etc.): Continuously Hearing Protection: Occasionally Respirator (Full Face): Frequently Steel-toed boots: Occasionally Powered Air Purifying Respirator (PAPR): NA Apron: Occasionally Self-Contained Breathing Apparatus (SCBA): NA Qualifications Education /Experience /Background: High School diploma or General Educational Development (GED) required Minimum of AA degree in Chemistry or equivalent laboratory experience required Bachelor's degree in science discipline with a working knowledge of Chemistry preferred 24 hour OSHA HAZWOPER training preferred. Knowledge /Skills /Abilities: Strong team player Excellent Interpersonal and communication skills Time management: the ability to organize and manage multiple deadlines Strong customer service orientation Required Certification /Licenses /Training: 24-Hour HAZWOPER Training Additional Information Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

SGS is the global leader and innovator in inspection, verification, testing and certification services. Founded in 1878, SGS is recognized as the global benchmark in quality and integrity. With over 97,000 employees in 130 countries and operating a network of more than 2,400 offices and laboratories, we provide services to almost every industry by assuring quality and safety of products and services. Trusted all over the world, SGS is a market leader because we put 100% passion, pride and innovation into everything we do. We encourage new ideas. We welcome people who challenge the way we do things. And we will be 100% committed to helping you reach your full potential. Summary Responsible for safely conducting analysis and reporting of various products, such as crude oil, fuel oils, middle distillates, petroleum and petrochemicals, LPG and LNG gases as well as lubricants for the Natural Resources and Industries and Environment sectors. Job Functions Responsible for conducting laboratory analysis (hands on working on the bench). Complete all laboratory reports as applicable. Understand and keep current with all laboratory analysis methods. Assist with the maintenance and calibration of equipment. Understand and keep current with all laboratory safety and reporting techniques. Adheres to internal standards, policies and procedures. Prepare chemical solutions according to standard formulas. Other duties as assigned. Qualifications Education and Experience High School Diploma or GED (Required) Associates Degree in a science discipline (Preferred) 1-year experience working in a laboratory setting (Preferred) For Crude Assay Technician: Previous experience in crude oil assay distillation per ASTM D2892 and ASTM D5236 (Preferred) Licenses and Certifications N/A Knowledge, Skills and Abilities Good organization skills, detailed oriented and completes tasks in a timely manner. (Required) Able to work in a routine repetitive fast paced work environment (Required) Able to stand on feet for long periods of time (Required) Ability to interpret a variety of instructions as may be furnished in oral, written, diagram, electronic or schedule form. (Required) Acts accordingly to the SGS standards of ethics and integrity (Required) Must be able to work with all chemicals, petrochemicals and petroleum products. (Required) For Crude Assay Technician: Possess working proficiency of ASTM D4052, D5002, D97, D5853, UOP 163, D4294; Understands and is able to read and interpolate applicable data and tables, interpret applicable graphs and control charts, complete laboratory raw data sheets, and is able to compute rates, ratio, percents and material quantities (linear, volumetric, weight, etc.); able to synthesize information from a variety of sources and evaluate relevance as pertains to crude assay trending properties. (Required) Physical Demands of the Job Stand: Constantly Move or traverse: Frequently Sit: Occasionally Use hands: Constantly Reach with hands and arms: Constantly Climb or balance: Occasionally Stoop, kneel, crouch or crawl: Occasionally Talk/hear: Constantly Taste/Smell: Constantly Lift/carry/push or pull: Occasionally 25 lbs Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.

Core Laboratories is the Reservoir Optimization Company Core Laboratories Inc. is a leading provider of proprietary and patented reservoir description and production enhancement services and products used to optimize petroleum reservoir performance. The Company has over 70 offices in more than 50 countries and is located in every major oil-producing province in the world. We are well-positioned to serve the growing needs of the energy transition while continuing to fulfill the demand for reliable and affordable energy sources like crude oil and natural gas. Our services, products, expertise, and innovations will continue to be essential as our clients meet the growing demand for energy globally. For more information, visit *********************** At Core Lab, our values matter: Safety, Honesty and Integrity, Customer Focus, Building Trust, and Employee Development. We regard our employees as our greatest asset. We believe that identifying, attracting, developing, and retaining talent are significant actions because our people are so important. Performs routine laboratory tests under close supervision to determine chemical or physical characteristics designated by clients. DUTIES & RESPONSIBILITIES * Perform basic analytical tests from well-defined standards and procedures as required by the Location Manager or senior management staff. * Complete laboratory raw data sheets and make accurate entries into Saybolt's laboratory computer programs. * Assist senior laboratory personnel in the preparation of samples for analysis and the setting up, adjusting and operation of laboratory equipment for which the technician has been adequately trained and has been verified to operate correctly in accordance with applicable standards and sound laboratory practice. * Verify and communicate results obtained from the performance of laboratory procedures and make the appropriate entries into instrument logs, control charts, laboratory worksheets, and any other media, whether print or electronic, assuring the validity and traceability of the information. * Perform and maintain laboratory procedures, equipment calibration, control charting, documentation and records in full compliance with the quality assurance program outlined in Saybolt's quality manuals and compliance program. * Clean and sterilize laboratory equipment. * Prepare chemical solutions according to standard formulas for use in laboratory analysis. * Laboratory technicians must be documented to be able to perform basic tests in accordance with applicable standards and sound laboratory practice. * Exercise procedural, safety and quality requirements specified in Laboratory Manual #5, Saybolt LP HSE Manual, and the Core Laboratories Safety and Environmental Manual, and all applicable company policies. * QUALIFICATIONS * High school diploma or equivalent is required. * Bachelor's degree preferred. * Two to three years of related experience and/or training. KNOWLEDGE, SKILLS & ATTRIBUTES * Strong communication, presentation, and interpersonal skills. * Ability to work independently and collaboratively in a fast-paced and dynamic environment. * Proficient in Microsoft Office applications. OTHER INFORMATION (US ONLY) PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The Company requires laboratory technicians to meet the following physical qualifications * Pass the drug and alcohol test specified for safety-sensitive employees. * Be able to work in the presence of odors typical of petroleum or petrochemicals without allergic reactions or nausea when such odors are within OSHA-designated permissible exposure limits (PELs). * While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel objects, tools, or controls; talk or hear; and test or smell. The employee frequently is required to walk, sit, and reach with hands and arms. The employee is occasionally required to stoop, kneel, crouch, or crawl. * Laboratory personnel must regularly lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * While performing the duties of this job, the employee may be exposed to fumes, airborne particles, and toxic or caustic chemicals. The Company provides product information, training, engineering controls, and personal protective equipment in an effort to protect employees from exposure to potentially harmful levels of those materials. Employees are required to read product information, use available engineering controls, follow guidelines presented during training, and be able to wear and use appropriate protective equipment, including respiratory protective equipment, as may be required by the work environment. * The noise level in the work environment is usually moderate. Core Laboratories, including all of its affiliated and related entities, is an equal opportunity employer and is committed to creating an inclusive environment for everyone. Employment decisions are made regardless of characteristics including, but not limited to, race, color, sex, sexual orientation, gender identity, national origin, age, disability, religion, genetic information, protected veteran or uniformed service member status, and any other characteristic protected under applicable law.