Quality assurance technician jobs in Birmingham, AL - 102 jobs

Job Description The Quality Technician ensures that all compounded products are manufactured in accordance with current Good Manufacturing Practices (GMP) and also meet all internal specifications. This position is responsible for performing a number of manual and automated quality assurance checks on in-process products and finished goods. This position requires strong organizational skills and the ability to prioritize work and respond to customer demands in a timely fashion are critical requirements of this position. This position is responsible for working collaboratively with other personnel in the Quality Department to ensure the highest quality product is delivered to the consumer. Job Activities and Responsibilities: Collect and send samples of compounded sterile preparations (CSPs) for sterility, potency, and endotoxin testing. Conduct environmental monitoring (e.g., air and surface sampling) in cleanrooms to ensure compliance with regulatory standards. Perform visual inspection of finished drug products. Maintain incubation schedules of environmental monitoring sample plates and document results in associated reports and batch records. Maintain accurate and thorough records of all testing and inspections. Ensure all documentation complies with FDA 503B regulations, USP standards, and internal SOPs. Review batch records and verify that all procedures were followed correctly. Assist in internal and external audits to ensure compliance with FDA regulations, USP , USP, and other applicable guidelines. Work closely with the Quality Assurance (QA) team to implement corrective and preventive actions (CAPAs) when non-conformities are identified. Maintain effective communication and partnership with Operations Management department. Participate in root cause analysis to find the sources of defects or quality problems. Ensure that all QC laboratory equipment is properly calibrated and maintained according to the manufacturer's specifications. Review of draft and executed batch records, release of pharmaceutical products, and QA review and approval of product label proofs. Participate in continuous improvement initiatives to enhance the quality control processes and overall product quality. Provide input on QC methods and assist in the development of new testing procedures as needed. Assist with SOP training, personnel training and competency assessments for handwashing/garbing and training of quality technicians. Train other staff members on QC procedures and best practices. Stay current with new regulations, guidelines, and techniques related to quality control in 503B compounding Oversight of validation projects (i.e. equipment, facility, methods, and process), deviation investigations, and CAPA and Out of Specifications (OOS) investigations. Ensure all QC activities comply with FDA 503B requirements and other relevant regulatory bodies. Prepare and review QC sections of regulatory submissions. Under the direction of supervisor/lead, document, initiate, and investigate quality events for deviations and noncompliance. Conduct internal audits and gap analysis of processes, systems, and procedures. Assist with external, regulatory inspections. Maintain quality records (equipment calibration and maintenance, training, deviation and noncompliance investigations, environmental monitoring, Certificate of Analysis, clean room certification etc.). Maintain quality standards by approving incoming materials, in-process production, and finished products. Receive, store, and log in samples for testing analysis. Participate in investigations into any deviations, out-of-specification results, or product complaints. Collaborate with QA to resolve issues and prevent recurrence. Other duties, responsibilities and qualifications may be required and/or assigned as necessary. Qualifications and Education Requirements Compounding, cGMP, and/or laboratory experience preferred High school diploma required and Associates or Bachelor's degree in Health Sciences/Microbiology preferred Must be able to follow gowning/garbing procedures including wearing all protective gear (gown, hair bonnet, mask, beard cover, gloves, goggles) as outlined in site SOPs Strong written communication and interpersonal skills. Demonstrated ability to work in a demanding, high performance work environment and create a positive, team-oriented culture. Must be well organized and detail-oriented with proven initiative and self-starter skills. Must possess problem solving and analytical skills Demonstrated ability to direct individuals and delegate responsibilities and tasks Excellent work ethic, including a personal drive to excel independently. Solid PC skills including Microsoft Office Suite (Word, Excel, Outlook) 20/20 Vision (either aided or unaided) as required by CGMP regulations for visual inspection of finished drug products. Physical requirements: Ability to use a computer and computer-related equipment, printer/fax machine Prolonged periods of sitting and/or standing. Communicate by telephone and email Lift to forty (40) pounds at times. 20/20 vision (either aided or unaided) Benefits: Health care insurance (medical, dental, vision) Life Insurance Supplemental Insurance PTO 401K matching Sick leave

The Quality Technician plays a critical role in the quality control processes, ensuring that all products and services comply with rigorous quality and reliability standards. This position involves systematic testing and evaluation of materials and processes, along with data analysis to drive continuous improvement. Job Duties Conduct detailed testing of products and services, utilizing statistical methods to analyze results and generate actionable recommendations for quality enhancement. Ensure all products and services meet specified quality standards and regulatory requirements through rigorous inspection and documentation processes. Proficiently utilize various gaging instruments and measurement systems, ensuring accurate application and calibration to maintain data integrity. Oversee the management, maintenance, and repair of gaging equipment, adhering to industry standards and best practices. Operate and monitor advanced inspection equipment, collecting and analyzing quality data to identify trends and areas for improvement. Procure necessary gaging supplies and equipment, maintaining inventory levels to support ongoing quality assurance activities. Ensure full compliance with relevant regulatory and quality standards, implementing corrective actions as necessary. Recommend modifications to existing quality standards, methodologies, and procedures based on analysis of quality data and industry advancements. Complete all documentation accurately and in a timely manner, ensuring compliance with internal and external audit requirements. Maintain a high standard of workplace organization and cleanliness following 5S methodologies. Adhere to all safety, environmental, and quality policies and procedures, fostering a culture of safety and compliance. Perform additional duties as assigned by management to support the quality assurance team. Experience and Education Computer Experience is required. 3 to 5 years of experience in quality control or a similar technical role within a manufacturing or production environment. Demonstrated ability to work under general supervision, addressing moderately complex issues independently and escalating complex problems to senior staff as needed. In-depth knowledge of quality control methodologies and regulatory compliance standards. Competencies/ Skills Expertise in interpreting technical work instructions and quality specifications. Strong written and verbal communication skills, with the ability to convey technical information clearly. Advanced problem-solving and analytical thinking skills, with a focus on data-driven decision-making. Proficient in the use of gaging instruments, with a strong understanding of their applications in quality measurement.

Join our Team: Quality Technician Birmingham, AL Join our team at Terex Utilities and embark on an exciting opportunity as we seek a skilled and dedicated Quality Technician to contribute to the Terex team in Birmingham, AL. At Terex we believe in fostering a vibrant and inclusive work culture where every person is empowered to thrive. We're dedicated to driving quality, innovation, embracing diversity, and creating an environment where everyone feels valued and respected. We're committed to excellence in everything we do, and we're seeking talented individuals who share our passion and values to join our team. What you'll do • Safe and positive approach to daily standard work. • Proficient in reading blueprints, schematics and other types of engineering/manufacturing drawings. • Understanding of precision measurement equipment and applications. • Experienced with Microsoft Excel, Word, and PowerPoint. • Basic understanding of iPads/digital applications. • Highly proficient in communicating problems and solutions to leadership, internal and external customers, and with other departments and plants. • Must be familiar with weld inspection methods used by Terex Utilities at the various facilities. • Ability to investigate problems, determine root cause, and suggest or implement effective solutions. • Must have a desire to make a difference, make long-term changes to Terex Utilities Quality. • Ability to train the Terex Utilities team on Quality Standards and Customer Requirements. • Perform Audits/Inspections at specified Quality gates. • Write non-conformances and notify correct departments • Issue red tags • Help identify and drive internal quality and safety improvements • Work with operations team to resolve issues and put in countermeasures to prevent future reoccurrences. Improve/modify test procedure as required. • Other Job duties as assigned What you'll bring • High School Diploma and/or equivalent experience • 2-3 years of proven experience in Assembly/Installation, Testing, or Inspection. • Possess good mechanical aptitude • Effectively communicate with all team members • Function as a team member and contribute to group goals while maintaining a positive attitude. • Work independently with minimal supervision in a responsible manner • Recognize potential safety hazards and take appropriate actions to minimize risks • Maintain the integrity of confidential business and product information • Demonstrate acceptable attendance for company standard; provides adequate notification; aware of impact on organization • Take initiative to recognize areas of opportunity and resolve with appropriate action • Identify problems, work towards root cause elimination utilizing appropriate problem-solving methods • Demonstrate excellent leadership skills • Help others where needed, backs up others • Willingness to be flexible to learn new skills based on the need of the company • Consistently performs to Takt Time or quoted time. • Meets established metrics by performing quality work in accordance to SOPs for the area with minimal errors • Work to improve processes within their work area - uses appropriate tools to find and eliminate waste and to reduce overall business costs • Continuously search for new and better ways of doing things; challenges the status quo and sets stretch goals; works across boundaries to achieve common goals; strives to continuously improve oneself Why Join Us • We are a global company, and our culture is defined by our Values - Integrity, Respect, Improvement, Servant Leadership, Courage, and Citizenship. Check out this video! The Terex purpose. • Safety is an absolute way of life. We expect all team members to prioritize safety and commit to Zero Harm. • Our top priority is creating an inclusive environment where every team member feels safe, supported, and valued. • We make a positive impact by providing innovative solutions, engaging our people, and operating in a sustainable way. • We are committed to helping team members reach their full potential. • Through innovation and collaboration, our vision remains forward-looking, and we aim to be a catalyst for change, inspiring others to build a better world for generations. • We offer competitive salaries, health insurance (medical, dental, vision, Rx), life insurance, accidental death & dismemberment (AD&D), short-term and long-term disability, extended leave options, paid time off, company holidays, 401k matching, employee stock purchase plan, legal assistance, wellness programs, tuition reimbursement and discount programs. For more information on why Terex is a great place to work click on the link - Careers | Terex Corporate The compensation range for this position is $22.00-$23.50 per hour. Pay is based on several factors including but not limited to education, work experience, certifications, etc. This above description is non-exhaustive and there may be additional duties in accordance with the role. If you are interested in an open position but feel you may not meet all the listed qualifications, we still encourage you to apply. About Terex: Terex Corporation is a global industrial equipment manufacturer of materials processing machinery, waste and recycling solutions, mobile elevating work platforms (MEWPs), and equipment for the electric utility industry. We design, build, and support products used in maintenance, manufacturing, energy, minerals and materials management, construction, waste and recycling, and the entertainment industry. We provide best-in-class lifecycle support to our customers through our global parts and services organization, and offer complementary digital solutions, designed to help our customers maximize their return on their investment. Certain Terex products and solutions enable customers to reduce their impact on the environment including electric and hybrid offerings that deliver quiet and emission-free performance, products that support renewable energy, and products that aid in the recovery of useful materials from various types of waste. Our products are manufactured in North America, Europe, and Asia Pacific and sold worldwide. Additional Information: We are passionate about producing equipment that helps improve the lives of people around the world and providing our team members with a rewarding career and the opportunity to make an impact. We are committed to recruiting, engaging, developing, and retaining team members at all levels of our global workforce. Our culture is defined by our Terex Way Values - Integrity, Respect, Improvement, Servant Leadership, Courage, and Citizenship. Our values are the driving force behind our commitment to maintain an inclusive, supportive, non-discriminatory, and safe workplace for all team members. To that end, we are committed to actively foster a culture where every team member feels valued, listened to, and appreciated. We are committed to being fair and impartial in our decisions. As an Equal Opportunity Employer, employment decisions are made without regard to race, color, religion, national origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. If you are a qualified individual with a disability, including disabled veterans, you may request a reasonable accommodation if you are unable or limited in your ability to access job openings or apply for a job on this site as a result of your disability. You can request reasonable accommodations by contacting the recruiting department (person or department) at ********************************** . The Company offers competitive salaries, advancement opportunities, and a full range of benefits, including paid vacation, 401(k), medical, dental, and vision.

Here at Scotts Miracle-Gro there is no such thing as a typical day. Our culture is constantly energized by new and exciting growth opportunities and at a rapid pace. Below are details on an open job. If the role interests you and you would like to be considered we encourage you to apply! The hourly rate for this position at Scotts/Hawthorne will generally fall between $27.35 - 35.55 per hour and is paid weekly. Scotts/Hawthorne will consider various factors in determining the actual pay including your skills, qualifications, experience, and geographical location. We are looking for a Quality Technician to join our Scotts Miracle Gro team in Vance, AL! The Quality Assurance Technician is responsible for completing shift assignments to support the Quality department in a safety and effective manner. Assignments include performing chemical and physical testing per approved methods; data entry and result reporting; completing line audits, material inspections, and completing other tasks as assigned by the Lead technician or department supervisor or manager. What you'll do in this role: * Execution of chemical and physical analysis per approved methods and protocols. Interpreting results and advising plant operations on results and trends in the data. * Completion of assigned tasks and responsibilities that include any combination of the following: record keeping, LIMS data, SAP entry, product release, instrument maintenance and repair, supply management, safety and operation training, sample collection, audits, and inspections. * Support External analysis, R&D. * Perform housekeeping and safety and environmental tasks. What you'll need to be successful: * High school graduate with three years of experience in a lab setting or with two years advanced training degree. * One to three years of analytical chemistry and instrumentation experience * Previous experience with quality programs desirable.G.C, HPLC,ICP,AA, Leco, Spectrophotometer,Wet Chemistry Experience is preferred. * Knowledge of quality concepts and methods (GLP, ISO,GMP, Lean, Six Sigma) * Knowledge of general analytical testing methods, techniques and instrumentation * Knowledge of laboratory safety regulations * Knowledge of fertilizer chemistry * Ability to make good decisions * Good interpersonal skills with a customer service attitude. * Ability to use SAP software * Ability to provide preventative maintenance and repair to instrumentation * Ability to lift 50 pounds What we do for you (just to name a few cool ones): * Medical, dental, vision, life insurance, holidays, vacation and sick time benefits available within a month of your start date * Healthcare navigation, advocacy and support * 401(k) company match up to 7.5% with immediate participation and vesting * Ability to purchase company stock at a 15% discounted price from market value * $600 annual wellness reimbursement program * Up to $30,000 to help cover the cost of fertility treatments, adoption or surrogacy * Up to 18 weeks of time away to support your growing family * To view all of our great benefits, click here! * Eligibility for the above benefits may vary based on full-time/part-time status or additional factors. Not interested in this role? Stay up to date on future opportunities by joining our ScottsMiracle-Gro and Hawthorne Gardening talent communities. Scotts is an EEO Employer, dedicated to a culturally diverse, drug free workplace. EEO/AA Employer/Minority/Female/Disability/Veteran/Sexual Orientation/Gender Identity Notification to Agencies: Please note that the Scotts Miracle-Gro company does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Master Service Agreement, and specific approval to submit resumes to an approved requisition, the Scotts Miracle-Gro company will not consider or approve payment regarding recruiter fees or referral compensations.

Here at Scotts Miracle-Gro there is no such thing as a typical day. Our culture is constantly energized by new and exciting growth opportunities and at a rapid pace. Below are details on an open job. If the role interests you and you would like to be considered we encourage you to apply! The hourly rate for this position at Scotts/Hawthorne will generally fall between $27.35 - 35.55 per hour and is paid weekly. Scotts/Hawthorne will consider various factors in determining the actual pay including your skills, qualifications, experience, and geographical location. We are looking for a Quality Technician to join our Scotts Miracle Gro team in Vance, AL! The Quality Assurance Technician is responsible for completing shift assignments to support the Quality department in a safety and effective manner. Assignments include performing chemical and physical testing per approved methods; data entry and result reporting; completing line audits, material inspections, and completing other tasks as assigned by the Lead technician or department supervisor or manager.What you'll do in this role: Execution of chemical and physical analysis per approved methods and protocols. Interpreting results and advising plant operations on results and trends in the data. Completion of assigned tasks and responsibilities that include any combination of the following: record keeping, LIMS data, SAP entry, product release, instrument maintenance and repair, supply management, safety and operation training, sample collection, audits, and inspections. Support External analysis, R&D. Perform housekeeping and safety and environmental tasks. What you'll need to be successful: High school graduate with three years of experience in a lab setting or with two years advanced training degree. One to three years of analytical chemistry and instrumentation experience Previous experience with quality programs desirable.G.C, HPLC,ICP,AA, Leco, Spectrophotometer,Wet Chemistry Experience is preferred. Knowledge of quality concepts and methods (GLP, ISO,GMP, Lean, Six Sigma) Knowledge of general analytical testing methods, techniques and instrumentation Knowledge of laboratory safety regulations Knowledge of fertilizer chemistry Ability to make good decisions Good interpersonal skills with a customer service attitude. Ability to use SAP software Ability to provide preventative maintenance and repair to instrumentation Ability to lift 50 pounds What we do for you (just to name a few cool ones): Medical, dental, vision, life insurance, holidays, vacation and sick time benefits available within a month of your start date Healthcare navigation, advocacy and support 401(k) company match up to 7.5% with immediate participation and vesting Ability to purchase company stock at a 15% discounted price from market value $600 annual wellness reimbursement program Up to $30,000 to help cover the cost of fertility treatments, adoption or surrogacy Up to 18 weeks of time away to support your growing family To view all of our great benefits, click here! * Eligibility for the above benefits may vary based on full-time/part-time status or additional factors. Not interested in this role? Stay up to date on future opportunities by joining our ScottsMiracle-Gro and Hawthorne Gardening talent communities. Scotts is an EEO Employer, dedicated to a culturally diverse, drug free workplace. EEO/AA Employer/Minority/Female/Disability/Veteran/Sexual Orientation/Gender Identity Notification to Agencies: Please note that the Scotts Miracle-Gro company does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Master Service Agreement, and specific approval to submit resumes to an approved requisition, the Scotts Miracle-Gro company will not consider or approve payment regarding recruiter fees or referral compensations.

Why Join Our Team? Do you want to be part of a team that is making a positive difference in lives across the globe? Do you want to be part of a culture where you are recognized, respected, and rewarded for a job well done? U.S. Pipe has been providing quality water and wastewater products since 1899, and for over the past 125 years we have proudly supported local governments, municipalities, water departments, and businesses across the United States, and the world. What We Offer: * Team Collaboration: Join a team-oriented environment where collaboration is not just a buzzword but a priority. * Career Growth: Be part of an industry leader renowned for world-class design, manufacturing, sourcing, and distribution, and take your career to the next level. * Comprehensive Benefits: We provide a comprehensive benefits package with options tailored to meet your needs and those of your family. About the Role: U.S. Pipe is seeking a Quality Control Technician for our U.S. Pipe plant in Bessemer, Alabama. The ideal candidate will be responsible for ensuring that the product meets customer's requirements (both internal and external) at each stage of its manufacturing process, carrying out relevant testing and where necessary take corrective action to rectify non-conformance issues. Report quality issues data, ensuring the Quality Management System is adhered to at all stages. Specific Responsibilities: * Check dimensions of pipe spigots, grind spigots and cut and taper pipe spigots when required. * Ensure that pipe bells are of good quality and within specifications by visual inspection, gauging, and by performing minor salvage work. * Weigh pipe on pipe weighs scales and marks pipe accordingly or applies label. * Perform many or all of the following duties on in-process (WIP) pipe, depending upon the job assignment: visually inspect gauges, record data, calipers, measure, tape, mark, labels. * Perform inspection duties on finished products and accessories (both incoming and outgoing) on the shipping yard. Perform inspection duties on pipe linings at the cement lining facility and general inspection duties on products in the packaging department. * Inspect pipe spigot visually and with calipers to ensure that pipe spigot is acceptable and within specifications. Skills and Qualifications: * High School diploma or GED, basic math skills, and a minimum of 1 year manufacturing experience is required. * Previous foundry knowledge around melting, casting, annealing, inspection and testing procedures is desired.

REHAU | Water Technology is seeking a dependable Automation Production Technician to support our operations in Cullman, AL. This hands-on role supports automated production, labeling, and material-handling processes, helping ensure efficient product flow, accuracy, and quality. Responsibilities include operating and adjusting automated equipment, supporting final-stage packaging activities, and maintaining a clean, safe work environment. The ideal candidate is detail-oriented, safety-minded, and thrives in a fast-paced manufacturing environment with evolving automation. Essential Duties & Responsibilities Automation & Machine Operation Operate, monitor, and adjust automated equipment, scanners, labelers, and pallet-handling systems. Set and verify production “recipes,” machine dimensions, and product parameters. Load labels, select and print correct label formats, and ensure proper application. Conduct changeovers and assist with mechanical adjustments during production runs. Quality & Documentation Verify product data using digital scanners, HMIs, and system dashboards. Ensure compliance with internal specifications, quality standards, and FIFO requirements. Perform line checks, label audits, and product inspections. Accurately complete logs, forms, and system entries. Material Handling Safely operate a forklift and move materials through designated areas. Manually wrap pallets and prepare finished goods for staging or shipment. Lift, carry, and move materials up to 50 lbs consistently. Maintain clean and organized workspaces. Technical Support & Troubleshooting Use basic hand tools (wrench, calipers, tape measure, Allen keys). Troubleshoot labelers, digital scanners, printers, and automation sensors. Escalate equipment issues to maintenance or engineering as appropriate. Experience with FANUC robot interfaces or willingness to be trained (preferred). Safety Follow all REHAU safety policies and procedures. Participate in LOTO, safe lifting, forklift, and equipment-specific safety training. Immediately report hazards, quality issues, or equipment malfunctions. Minimum Qualifications High school diploma or equivalent. Strong computer literacy and ability to navigate HMI screens. Understanding of FIFO and inventory movement. Valid driver's license. Forklift certification (or ability to obtain). Ability to lift up to 50 lbs. Preferred Qualifications 2+ years of manufacturing experience. Experience with labeling systems, digital scanners, or automated equipment. Familiarity with FANUC robot programming or interfaces. Key Competencies Attention to detail Quality focus Problem-solving and troubleshooting Accountability Communication Safety awareness Adaptability and willingness to learn automation systems Schedule & Benefits: 12-hour shifts (day and night available; consistent with production schedule). Pay range $23.91-$28.66+ Full benefits package including health insurance, paid time off, and 401(k). Opportunities for on-the-job training and advancement within the company. Start Your Career with REHAU: If you're ready to work hard, learn, and support a high-performing team, apply today to become a Automation Production Technician at Rehau | Water Technology

Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded, and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. What You'll Do: Ensure Quality Control. Conduct routine testing of in-process materials, raw materials, environmental samples, and finished materials to ensure quality control of products at the point of production, shipping, and arrival upon the job site. Adhere to testing methods, including American Society for Testing and Materials (ASTM), American Association of State Highway and Transportation Officials (AASHTO) and Department of Transportation (DOT). Document and Report Information. Complete all required reports in a timely and accurate manner, interpreting, documenting, and storing the results. Communicate test results in a timely manner to the supervisor and properly document in a database. Maintain Lab Standards. Ensure housekeeping standards are maintained in and around the lab. Troubleshoot problems and review basic product specifications. Inspect, calibrate, and maintain testing equipment periodically. Monitor Stockpile. Inspect stockpiles, materials sources, and truckloads at plant sites. Monitor the daily construction of the stockpile to ensure that segregation and contamination is kept to a minimum or eliminated. Notify management immediately if contamination is identified. Inspect Equipment and Structures. Conduct routine inspections of the plant equipment in order to ensure safe, reliable, and compliant operations to maximize production and minimize interruptions. Additional Responsibilities. Other duties as assigned. Skills You'll Need: Experience. Prior training or experience in the materials testing field is preferred. Knowledge of general principles and practices of aggregate production is preferred. Safety Knowledge. Must display knowledge and awareness of construction and mining site hazards. Math Skills. Must possess good math skills and demonstrate the ability to perform simple to moderately complex arithmetic calculations. Technology Skills. Must have the ability to use computerized equipment and technology. Must be proficient in Microsoft Office Suite, Google, Oracle Business Environment, and other software packages relevant to the position. What You'll Like About Us: Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness and communication. Safe. Industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets up apart is the work we do impacts daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits. Medical, Dental, Vision programs, plus much more. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see our development programs and helping our employees meet their goals as a key part of our business. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. NOTICE TO TEMPORARY STAFFING AGENCIES, PLACEMENT SERVICES AND PROFESSIONAL RECRUITERS Vulcan Materials Company has an internal recruiting department. Please review our policy as it relates to the use of temporary staffing agencies, placement services and professional recruiters.

Quality Control Technician - 250002TZ Description Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded, and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. What You'll Do: Ensure Quality Control. Conduct routine testing of in-process materials, raw materials, environmental samples, and finished materials to ensure quality control of products at the point of production, shipping, and arrival upon the job site. Adhere to testing methods, including American Society for Testing and Materials (ASTM), American Association of State Highway and Transportation Officials (AASHTO) and Department of Transportation (DOT). Document and Report Information. Complete all required reports in a timely and accurate manner, interpreting, documenting, and storing the results. Communicate test results in a timely manner to the supervisor and properly document in a database. Maintain Lab Standards. Ensure housekeeping standards are maintained in and around the lab. Troubleshoot problems and review basic product specifications. Inspect, calibrate, and maintain testing equipment periodically. Monitor Stockpile. Inspect stockpiles, materials sources, and truckloads at plant sites. Monitor the daily construction of the stockpile to ensure that segregation and contamination is kept to a minimum or eliminated. Notify management immediately if contamination is identified. Inspect Equipment and Structures. Conduct routine inspections of the plant equipment in order to ensure safe, reliable, and compliant operations to maximize production and minimize interruptions. Additional Responsibilities. Other duties as assigned. Qualifications Skills You'll Need: Experience. Prior training or experience in the materials testing field is preferred. Knowledge of general principles and practices of aggregate production is preferred. Safety Knowledge. Must display knowledge and awareness of construction and mining site hazards. Math Skills. Must possess good math skills and demonstrate the ability to perform simple to moderately complex arithmetic calculations. Technology Skills. Must have the ability to use computerized equipment and technology. Must be proficient in Microsoft Office Suite, Google, Oracle Business Environment, and other software packages relevant to the position. What You'll Like About Us: Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness and communication. Safe. Industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets up apart is the work we do impacts daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits. Medical, Dental, Vision programs, plus much more. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see our development programs and helping our employees meet their goals as a key part of our business. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. NOTICE TO TEMPORARY STAFFING AGENCIES, PLACEMENT SERVICES AND PROFESSIONAL RECRUITERS Vulcan Materials Company has an internal recruiting department. Please review our policy as it relates to the use of temporary staffing agencies, placement services and professional recruiters. Job: Quality Control Primary Location: Alabama-Bessemer Organization: GM - AL Schedule: Full-time Job Posting: Oct 17, 2025, 8:10:12 PM

1st OR 2nd OR 3rd Shifts PRODUCTION Tech , Lift 40 lbs **To Interview CALL Today! 8am to 5pm M-F ************ *NO Rotating *WILL Train *Full Time *TRAINING on 1st Shift LISTEN: Your MUSIC While Working **Paid WEEKLY $660 = 40 hours / 48 hours = $858 Shifts: M-F 1st 8am to 4pm (*NO Sundays) 2nd: M-F 4pm to 12am (*NO Sundays) 3rd: Week Starts SUNDAY Night 12am to 8am NO UNIFORMS Pants, Shorts, Capris,T-Shirt, Full Shoe *NO Steel Toes Required For INTERVIEW Call M-F ************ M-F 8am to 5pm Full Time Position *NO Sundays Beverage at YOUR Work Station Benefits: Medical, Dental, Bonus, Retirement, and more… **Call Today ************!

Quality Control focuses on process control and providing accurate feedback to internal customers. Responsible for the effective management and/or day-to-day supervision of quality control and inspection. Responsible for following implemented of standards, methods and procedures for inspecting, testing and evaluating the precision, accuracy, efficacy and reliability of products. Responsible for usage of software, hardware, materials, parts, and products to ensure adherence to established standards of quality. Responsible for defined product sampling and checks for non-conformity. Executes required inspections defined by sampling plans for product conformity with a focus on Customer satisfaction. Essential Duties and Responsibilities include, but are not limited to: • Inspect parts to ensure conformity to the customer requirement and to industry standards. These inspections include dimensional, visual, material handling, workmanship, paint applications, free of all FOD • Utilize various measuring tools, which includes manual measuring instruments, CMMs, mylars, visual measuring systems, etc. • Prepare, update, and inspect Company and Customer inspection records for accuracy, communicating as needed, clearly and concisely. • Actively contributes to a culture of continuous improvement • Other duties as assigned Qualifications: Experience and Education: 1-2 years of relevant experience High school degree or equivalent, plus advanced training Technical Skills: Excellent attention to detail Working knowledge of customer specifications and requirements Basic computer skills Problem solving abilities Strong verbal and written communication skills Ability to use measuring equipment Ability to work both individually and in a team environment Understand and obey safety requirements Commitment to keep work area clean and free of debris Physical Requirements: Must be able to lift and/or move up to 50lbs Specific vision abilities include close and distance vision, depth perception and ability to adjust focus Ability to use hands to finger, handle, or feel, as well as reach with hands and arms for extended periods of time o Capable of standing for long periods Supervisory Responsibilities: None. Travel Required: N/A Note: This job description in no way states or implies that these are the only duties to be performed by the employee(s) of this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the employee(s) will possess the skills, aptitude, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety to themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an at will relationship. Affirmative Action/Employment Opportunity (EEO) Statement: ALIGN PRECISION is an equal opportunity employer and values diversity at our company. We are committed to creating a workplace where all qualified individuals are welcome and can thrive, regardless of race, religion, color, national origin, gender, sexual orientation, gender identity, age, marital status, veteran status, disability status, or any other characteristics protected by law.

Quality Control focuses on process control and providing accurate feedback to internal customers. Responsible for the effective management and/or day-to-day supervision of quality control and inspection. Responsible for following implemented of standards, methods and procedures for inspecting, testing and evaluating the precision, accuracy, efficacy and reliability of products. Responsible for usage of software, hardware, materials, parts, and products to ensure adherence to established standards of quality. Responsible for defined product sampling and checks for non-conformity. Executes required inspections defined by sampling plans for product conformity with a focus on Customer satisfaction. Essential Duties and Responsibilities include, but are not limited to: • Inspect parts to ensure conformity to the customer requirement and to industry standards. These inspections include dimensional, visual, material handling, workmanship, paint applications, free of all FOD • Utilize various measuring tools, which includes manual measuring instruments, CMMs, mylars, visual measuring systems, etc. • Prepare, update, and inspect Company and Customer inspection records for accuracy, communicating as needed, clearly and concisely. • Actively contributes to a culture of continuous improvement • Other duties as assigned Qualifications: Experience and Education: 1-2 years of relevant experience High school degree or equivalent, plus advanced training Technical Skills: Excellent attention to detail Working knowledge of customer specifications and requirements Basic computer skills Problem solving abilities Strong verbal and written communication skills Ability to use measuring equipment Ability to work both individually and in a team environment Understand and obey safety requirements Commitment to keep work area clean and free of debris Physical Requirements: Must be able to lift and/or move up to 50lbs Specific vision abilities include close and distance vision, depth perception and ability to adjust focus Ability to use hands to finger, handle, or feel, as well as reach with hands and arms for extended periods of time o Capable of standing for long periods Supervisory Responsibilities: None. Travel Required: N/A Note: This job description in no way states or implies that these are the only duties to be performed by the employee(s) of this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the employee(s) will possess the skills, aptitude, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety to themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an at will relationship. Affirmative Action/Employment Opportunity (EEO) Statement: ALIGN PRECISION is an equal opportunity employer and values diversity at our company. We are committed to creating a workplace where all qualified individuals are welcome and can thrive, regardless of race, religion, color, national origin, gender, sexual orientation, gender identity, age, marital status, veteran status, disability status, or any other characteristics protected by law.

Purpose: To oversee the audits of process and products within the department to which they are assigned. This includes control plan audits and the verification of data taken on a daily basis to verify that process controls are being utilized Qualifications: High School Diploma or GED 3+ years' experience working in a manufacturing environment preferred Knowledge: Business Writing General Computer Operation Manufacturing Concepts High School Diploma Proficient in computer operation Proficient in Microsoft Office Applications preferred Good Communication Skills Planning and organizational skills Main Tasks: Interface with quality engineering functions to secure documentation needed for successful audits Daily process audits designed to verify the process controls in use are being utilized and functioning Process Audits Ensure specifications are met according to the Control Plan in assigned area Create and Follow up on Quality Alerts Assist with Containment when defects occur Download reading into the color care software Advise the color harmony team when the readings are out of tolerance Responsible for measuring orange peel and gloss using the Wave scan and Gloss meters Assist the Color Technicians when needed Perform related office and clerical functions such as, data entry and filing.

G-O Manufacturing is looking for Quality Control Inspector for our growing manufacturing facility in Bessemer, AL. If you're dedicated and ambitious, G-O Manufacturing is an excellent place to grow your career. At G-O Manufacturing we believe in excellence in all that we do. We are driven by our passion for purpose and a culture that pushes the boundaries of possibilities to distinguish us from other companies and fuel our success. We are manufacturer of premier pull out drawers and shelving for ShelfGenie, the leading Glide-Out Shelving franchise in the USA and Canada. Job Description We are seeking an experienced, dedicated Quality Control Inspector to join our team. In this position, you will maintain quality standards by approving incoming materials, in-process production, finished products, and recording the results. Excellent communication and leadership skills are a must, as well as a keen attention to detail. Responsibilities: Perform minor repairs and cleanup on parts and products. Approve incoming materials by confirming specifications, conducting a visual and measurement test, and rejecting and returning unacceptable materials Approve in-process production by confirming required specifications, conducting visual and measurement tests, and communicating the required adjustments to the production supervisor Approve all finished products by confirming specifications and conducting required tests Return products for re-work if needed and complete documentation to confirm re-work Document and update inspection results by completing reports and logs Keep measurement equipment operating by following operating instructions and calling for repairs. Maintain safe work environment by following standards and procedures and complying with legal regulations Coach and mentor junior employees; seek opportunities to grow leadership in others Update job knowledge by participating in educational opportunities, reading technical publications, attending seminars, watching industry videos, etc. Accomplish organization mission by completing related results as needed Qualifications: Understanding of manufacturing methods and procedures Must be able to learn and interpret all product types, codes and quality guide info to ensure each product passes its own quality requirements. Hand skills to perform detailed touchup tasks such as appling wood caulk or puddy, light detailed sanding. Removal of residues or ink markings left over from production processing Ability to read a tape measure, use measuring tools/gages and basic math skills Preferred Qualifications: A general working knowledge of wood characteristics. Past experience working in a fast-paced assembly environment as a QA/QC line associate. Skilled at reading technical drawings or blueprints Compensation: $13.00 - $16.00 per hour G-O Manufacturing - We are the manufacturer of premier pull out drawers and shelving for ShelfGenie, the leading Glide-Out Shelving franchise in the USA and Canada. All of our solutions are hand crafted and custom-made in our manufacturing plant in Brighton, just southwest of Birmingham, Alabama. At G-O Manufacturing we believe in excellence in all that we do. We are driven by our passion for purpose and a culture that pushes the boundaries of possibilities to distinguish us from other companies and fuel our success. By providing better access, improved storage and more organizational options, our Glide-Out shelves have allowed homeowners to fall in love with their cabinets and pantries all over again.

Engineering Technician Fulltime Perform field and/or laboratory testing, observation, and inspection of construction materials (e.g. soils, aggregates, concrete, asphalt, and steel). Communicate with project manager, engineering technicians, client representative, contractor's representative and others as applicable regarding the construction site, project requirements, and testing, observation, and inspection requirements and results. Transport material samples with associated identifying documentation to the laboratory for further testing and analysis. Tabulate, prepare, and submit data and observation in the form of written and digital reports as work is performed for daily transmittal to the Project Manager. Maintain and clean equipment, vehicles and work areas. May assist with scheduling and dispatch of Technicians to project sites. Adhere to strict safety standards. Responsibilities: * Performs testing, observation, and inspection as directed in accordance with training and the specified procedures. * Provides clear documentation of findings and results. * Performs basic analysis of data to verify accuracy before communication and submittal to the Project Manager. * Communicates information to Project Manager and other personnel as directed by the PM. * Assists higher level technicians on complex tasks. * Maintains assigned equipment and related calibration. * Follows safety rules and practices and other safety requirements for all projects. Performs pre-task planning prior to executing work. Report any safety issues or concerns to management. * Be responsible for maintaining quality standards on all projects. Qualifications: * High school diploma or equivalent. * Minimum 1-2 years of relevant experience or the equivalent in training and related experience. * Experience with laptop computer use and Microsoft Word and Excel * ACI certification * Successful completion of related internal safety certifications. * Valid driver's license with acceptable violation history About Seneca Resources: Seneca Resources is a client driven provider of strategic Information Technology consulting services and Workforce Solutions to government and industry. Seneca Resources is a leading IT services provider with offices in Virginia, Alabama, Georgia, North Carolina and New York that service clients throughout the United States. We are an Equal Opportunity Employer and value the benefits of diversity in our workplace.

As an Engineering Technician, you will work closely with engineering, production, and maintenance teams to improve equipment functionality, support operator training, and lead continuous improvement efforts on the production floor. This position is ideal for candidates with a background in mechatronics, automation, or mechanical/electrical systems who are eager to make a hands-on impact in a high-performance manufacturing environment. Responsibilities Provide direct technical support to extrusion lines on assigned shift. Partner with production supervisors and operators to stabilize processes and troubleshoot equipment issues. Assist with equipment performance improvements, reliability initiatives, and root cause problem-solving. Support the development of Standard Work, QPPs, and training materials for operators. Collaborate with engineers to introduce new methods, technology, or process improvements. Maintain documentation, logs, and technical records to ensure accurate communication across shifts. Serve as a key resource for technical skill-building among shift operators. Collaborate and offer technical engineering support for equipment upgrades/installs/troubleshooting to improve the effectiveness and reliability of all process equipment Qualifications Associate's degree in engineering technology, Mechatronics, Electrical/Mechanical Engineering, or related field. Hands-on experience with technical troubleshooting in a production or lab environment. Strong mechanical aptitude with exposure to automation, robotics, or industrial controls preferred. Proficiency with technical documentation, problem-solving tools, and data analysis. Excellent teamwork and communication skills, with ability to support cross-functional teams. Willingness to work 2nd or 3rd shift in a fast-paced manufacturing environment. Willingness to travel to other Rain Bird locations for training, trials, and benchmarking. DESIRED QUALIFICATIONS: 3+ years of hands-on experience in a technician-level role supporting production or engineering operations. Proven ability to systematically troubleshoot processing and equipment performance issues, especially in high-volume manufacturing environments. Experience with plastics extrusion, automated machinery, or industrial manufacturing systems. Familiarity with CAD software (e.g., AutoCAD, SolidWorks) and/or programming tools such as Python, MATLAB, or PLCs for diagnostics and process optimization. Demonstrated success in supporting operator training, developing technical documentation, and enhancing shift-level skill-building initiatives. Rain Bird is an equal opportunity employer.

Job Description TRIGO Global Quality Solutions has several immediate openings for Quality Inspectors in Sylacauga, AL. Payrates are 1st shift $17.50 and 2nd shift $18.50. Overall Purpose of the Quality Inspector Provide Quality services and support for all missions assigned to a manufacturing or warehouse site while ensuring a healthy and safe work environment. Reports to Site Supervisor/Site Leaders Responsibilities (To include but not limited to the following) Client Relationship & Business Development Act as an impartial third party between the production source and the customer facility to ensure the product meets set criteria Operations Check/inspect manufactured parts or products for defects Read and follow work instructions and general processes Use measuring or testing equipment as needed Ensure products meet quality standards Display excellent customer service Must comply with local and company Health & Safety legislation, laws, and policies Organization & Management Collect and record data Technical Utilize company portal for time recording and policy acknowledgements Other Any other duties as assigned Knowledge, skills, abilities Hard skills Must be able to speak and read in the English language Good communications skills Must be able to multi-task Ability to work in a fast-paced environment Ability to handle sensitive and confidential material Ability to walk and stand for long periods of time Ability to bend, lift, twist and move freely Ability to periodically lift/move up to 50 pounds Must have reliable transportation Values & attitudes Global team spirit Team player Caring for people Open-minded Excellence Reactive Resilient to pressure Rigorous Customer focus Client oriented Reliable & trustworthy Flexible Initiative Autonomous Innovative Daring Work experience Overall recommendations No experience necessary Ability to read blueprints a plus Education background Overall recommendations High School Diploma or Equivalent recommended or comparable work experience About TRIGO Global Quality Solutions Founded in 1997, TRIGO is a multinational company providing operational Quality Management solutions for the manufacturing sector, especially in the automotive and aerospace industries. With a team of more than ten thousand professionals present in 20+ countries across 4 continents, TRIGO offers a comprehensive portfolio of Quality Assurance services ranging from inspection to expert auditing, consulting and training. The unrivaled expertise, industrial mindset and extensive global footprint that TRIGO has built up over the last 3 decades has made TRIGO the leading quality solutions provider using the latest innovative and reliable digital systems and standard processes, delivering results in the most demanding industries. TRIGO has recently started to expand its clientele by offering quality services to the medical, chemical and food industries. TRIGO Global Quality Solutions is committed to the core values of equal employment opportunity. We are committed to treating people fairly, and with respect and dignity. We offer employment opportunities based upon an individual's qualifications and performance, free from discrimination or harassment because of race, ancestry, place of origin, ethnic origin, color, citizenship, creed, sex, sexual orientation, age, marital status, family status, and disability. Job Posted by ApplicantPro

The Technician is responsible for performing jobs involving servicing and repair of class 6-8 heavy duty truck and diesel engines of various types. The successful candidate will be expected to work both independently and on a team. Extensive on the job training, classroom instruction, and e-learning must be successfully completed to remain in the technician training program. The Truck Engine Technician will demonstrate initiative, commitment to teamwork, enthusiasm for customer service, and dedication to finding solutions in an efficient manner. The Technician will advance in classification as attitude, skill level, and job performance allows. Plans and performs minor repairs using correct tools and procedures Orders and return parts for assigned jobs in timely manner Ability to perform the following tasks on basic components in work area including engine, hydraulic, transmission, and electrical components: remove and install; disassemble and reassemble; perform minor adjustments Ability to perform Preventive Maintenance service according to factory guidelines Demonstrates proper use of service information systems Works as helper in field service with experienced Technician as required Adheres to and follows all applicable and required safety standards and procedures Works independently in the field as required

Join our Team: Quality Technician Birmingham, AL Join our team at Terex Utilities and embark on an exciting opportunity as we seek a skilled and dedicated Quality Technician to contribute to the Terex team in Birmingham, AL. At Terex we believe in fostering a vibrant and inclusive work culture where every person is empowered to thrive. We're dedicated to driving quality, innovation, embracing diversity, and creating an environment where everyone feels valued and respected. We're committed to excellence in everything we do, and we're seeking talented individuals who share our passion and values to join our team. What you'll do * Safe and positive approach to daily standard work. * Proficient in reading blueprints, schematics and other types of engineering/manufacturing drawings. * Understanding of precision measurement equipment and applications. * Experienced with Microsoft Excel, Word, and PowerPoint. * Basic understanding of iPads/digital applications. * Highly proficient in communicating problems and solutions to leadership, internal and external customers, and with other departments and plants. * Must be familiar with weld inspection methods used by Terex Utilities at the various facilities. * Ability to investigate problems, determine root cause, and suggest or implement effective solutions. * Must have a desire to make a difference, make long-term changes to Terex Utilities Quality. * Ability to train the Terex Utilities team on Quality Standards and Customer Requirements. * Perform Audits/Inspections at specified Quality gates. * Write non-conformances and notify correct departments * Issue red tags * Help identify and drive internal quality and safety improvements * Work with operations team to resolve issues and put in countermeasures to prevent future reoccurrences. Improve/modify test procedure as required. * Other Job duties as assigned What you'll bring * High School Diploma and/or equivalent experience * 2-3 years of proven experience in Assembly/Installation, Testing, or Inspection. * Possess good mechanical aptitude * Effectively communicate with all team members * Function as a team member and contribute to group goals while maintaining a positive attitude. * Work independently with minimal supervision in a responsible manner * Recognize potential safety hazards and take appropriate actions to minimize risks * Maintain the integrity of confidential business and product information * Demonstrate acceptable attendance for company standard; provides adequate notification; aware of impact on organization * Take initiative to recognize areas of opportunity and resolve with appropriate action * Identify problems, work towards root cause elimination utilizing appropriate problem-solving methods * Demonstrate excellent leadership skills * Help others where needed, backs up others * Willingness to be flexible to learn new skills based on the need of the company * Consistently performs to Takt Time or quoted time. * Meets established metrics by performing quality work in accordance to SOPs for the area with minimal errors * Work to improve processes within their work area - uses appropriate tools to find and eliminate waste and to reduce overall business costs * Continuously search for new and better ways of doing things; challenges the status quo and sets stretch goals; works across boundaries to achieve common goals; strives to continuously improve oneself Why Join Us * We are a global company, and our culture is defined by our Values - Integrity, Respect, Improvement, Servant Leadership, Courage, and Citizenship. Check out this video! The Terex purpose. * Safety is an absolute way of life. We expect all team members to prioritize safety and commit to Zero Harm. * Our top priority is creating an inclusive environment where every team member feels safe, supported, and valued. * We make a positive impact by providing innovative solutions, engaging our people, and operating in a sustainable way. * We are committed to helping team members reach their full potential. * Through innovation and collaboration, our vision remains forward-looking, and we aim to be a catalyst for change, inspiring others to build a better world for generations. * We offer competitive salaries, health insurance (medical, dental, vision, Rx), life insurance, accidental death & dismemberment (AD&D), short-term and long-term disability, extended leave options, paid time off, company holidays, 401k matching, employee stock purchase plan, legal assistance, wellness programs, tuition reimbursement and discount programs. For more information on why Terex is a great place to work click on the link - Careers | Terex Corporate The compensation range for this position is $22.00-$23.50 per hour. Pay is based on several factors including but not limited to education, work experience, certifications, etc. This above description is non-exhaustive and there may be additional duties in accordance with the role. If you are interested in an open position but feel you may not meet all the listed qualifications, we still encourage you to apply. About Terex: Terex Corporation is a global industrial equipment manufacturer of materials processing machinery, waste and recycling solutions, mobile elevating work platforms (MEWPs), and equipment for the electric utility industry. We design, build, and support products used in maintenance, manufacturing, energy, minerals and materials management, construction, waste and recycling, and the entertainment industry. We provide best-in-class lifecycle support to our customers through our global parts and services organization, and offer complementary digital solutions, designed to help our customers maximize their return on their investment. Certain Terex products and solutions enable customers to reduce their impact on the environment including electric and hybrid offerings that deliver quiet and emission-free performance, products that support renewable energy, and products that aid in the recovery of useful materials from various types of waste. Our products are manufactured in North America, Europe, and Asia Pacific and sold worldwide. Additional Information: We are passionate about producing equipment that helps improve the lives of people around the world and providing our team members with a rewarding career and the opportunity to make an impact. We are committed to recruiting, engaging, developing, and retaining team members at all levels of our global workforce. Our culture is defined by our Terex Way Values - Integrity, Respect, Improvement, Servant Leadership, Courage, and Citizenship. Our values are the driving force behind our commitment to maintain an inclusive, supportive, non-discriminatory, and safe workplace for all team members. To that end, we are committed to actively foster a culture where every team member feels valued, listened to, and appreciated. We are committed to being fair and impartial in our decisions. As an Equal Opportunity Employer, employment decisions are made without regard to race, color, religion, national origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. If you are a qualified individual with a disability, including disabled veterans, you may request a reasonable accommodation if you are unable or limited in your ability to access job openings or apply for a job on this site as a result of your disability. You can request reasonable accommodations by contacting the recruiting department (person or department) at **********************************. The Company offers competitive salaries, advancement opportunities, and a full range of benefits, including paid vacation, 401(k), medical, dental, and vision.