Quality assurance technician jobs in Hamburg, NY - 109 jobs

Starting pay is $23.40/hour (plus shift differential, if applicable). Year 2 = $26.74 Year 3 = $28.41 Year 4 = $33.43 First year: $70K+ with overtime. Wage progression over 3 years to a max of $33.43+/hr. With overtime up to $85K+ / year Excellent wages, benefits and product discounts. REPORTS TO: Area Leader/Team Leader SUMMARY: Work in a variety of areas, operating high-speed manufacturing production equipment in processing and packaging to produce Milk-Bone product for the company. KEY RESPONSIBILITIES Positions are afternoons and evenings and shifts can alternate weekly. Assigned shift attendance and weekend work is required. Follow all company Safety Rules and Good Manufacturing Practices (GMP's). Produce high quality products in a safe and healthful manner. Work in all areas of processing and packaging, as assigned, which includes operating, being in close proximity to and crossing platforms over machinery. Cross-training will occur throughout the facility in all aspects of high-speed manufacturing. Ability to work as part of a team. Assist fellow employees as needed. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each duty and responsibility satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the duties and functions of the position. 3+ years related manufacturing experience or equivalent technical/vocational experience preferred. Selected individuals must have excellent interpersonal and communication skills, be highly motivated and responsible, and work well within a team environment. Use of computers and PLCs in an industrial manufacturing environment is preferred. EDUCATION and/or EXPERIENCE High-school degree or equivalent is required. Associate degree preferred. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, GMP's and general instructions. Good communication skills are required. REASONING ABILITY Ability to apply common sense understanding to carry out both oral and written instructions. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions and duties of this job. Reasonable accommodations may be made to enable individuals with disabilities. While performing the duties of this job, the employee is regularly required to stand and lift. The employee is required to stand and walk at minimum 70% of the time. The employee must be able to work 8-hour shifts with a maximum of 16 hours required. The employees must be able to lift fifty (50) pounds. The employee must be able to squat or kneel and to bend on a frequent basis. The employee must be able to work in a cold and hot environment. The employee must be able to tolerate exposure to flour and yeast materials. The employee must be able to climb steps on a frequent basis. SAFE PERFORMANCE REQUIREMENTS Employee must have the ability to perform the essential job functions identified above consistent with safety standards and practices with or without a reasonable accommodation. WORK ENVIRONMENT The work environments characteristics described here are representative of those an employee encounters while performing the essential duties of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is located in a bakery which is a high temperature environment, especially in the summer months. This position requires you to spend the majority of your shift on your feet and walking. This position is in a loud noise environment and requires the use of hearing protection and other personal protective equipment. #ZR IND123

McGard LLC Quality Assurance Technician I Are you ready to take your skills to the next level? Look no further than McGard, a leading company in the automotive industry! We are seeking a highly talented and motivated Quality Assurance Technician I to join our dynamic team and contribute to our ongoing success. ABOUT MCGARD: McGard has been a trusted name in the automotive industry for over 60 years. We specialize in manufacturing high-quality, precision-engineered automotive security products and components. Our commitment to excellence, innovation, and customer satisfaction has earned us a reputation as a global leader in our field. BENEFITS: Comprehensive benefits package, including 10 company paid holidays and paid time off (PTO). Discretionary, annual profit sharing. Exciting and challenging projects in a collaborative work environment. Flexible working schedule including “9-80's” and flex time. On-site walking trail and convenience cafeteria. A supportive and inclusive company culture that values employee well-being and work-life balance. SCHEDULE: 1st Shift, Monday - Friday, 6:00am - 2:30pm Ability to work overtime during the week and Saturdays. COMPENSATION: Hourly Pay: $24.00 - $27.00 DOE RESPONSIBILITY: Ensures products and processes meet established quality standards by performing inspections, tests, and audits to identify and resolve defects. This position reports to the Quality Assurance Manager. JOB DUTIES: Committed to ensuring the achievement of continuous improvement within area of expertise, as well as areas of business in order to remain at the forefront of meeting Company objectives, thus proactively satisfying customers. This position mandates that all required safety classes, trainings, and certifications be completed and maintained within the specific position/department. Is aware of relevance and importance of their activities and how they contribute to the achievement of the quality objectives. This position requires an employee to work their regularly scheduled shift; ability to work overtime and weekends. Must be aware of and comply with related IATF/ISO procedures, as applicable, including ISO 17025 specifications and requirements. Must meet qualitative and quantitative standards for the position and department. Selects products for tests at specified stages in production process, and tests products for variety of qualities such as dimensions, performance, and mechanical, electrical, or chemical characteristics. Records test data, applying statistical quality control procedures. Part sorting. Demonstrates knowledge of the importance of “housekeeping” within the workspace, and how it relates to both safety and the 5S systems/methodology. This job description in no way states or even implies that these are the only duties to be performed by this employee. Other duties may be assigned. EDUCATION/ SKILL REQUIREMENTS: Ability to communicate effectively in English, both written and orally. High school diploma or general education degree (GED). Minimum one (1) year related experience. Works as a team player, helping to meet departmental and Company goals and objectives. Ability to read and interpret blueprints preferred. Must be able to fulfill essential job functions in a consistent state of alertness and safe manner. Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plain and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Knowledge of statistical analysis, precision measurement, and industrial practices. May specialize in any of the following areas of Quality Control: Process and Inventory Control, Incoming Material, Design, Product Evaluation, and Product Reliability. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Management can move employees into other departments for business needs. Position requires individuals to be capable of traveling and working throughout the entire facility, within reasonable accommodation. The noise level in the work environment is usually moderate. To find out more about McGard and reach your full potential with a career with us, visit ************** . “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or other characteristic protected by law.” #LI-ONSITE

McGard LLC

HWI has a fantastic opportunity to join our Quality Team as a Facility Quality Assurance Technician. The Facility Quality Assurance Technician supports HWI's mission and vision to drive industry performance and deliver quality results. This role focus is on the actual testing of product and raw materials, judging samples against standards and accurately enters data into our Laboratory Information Management System (LIMS). A successful candidate will maintain high level of accuracy and engagement to guide HWI towards achieving and exceeding their objectives. Responsibilities Verify in process production. Performs physical testing of finished goods. Performs final inspections. Enters LIMS data into appropriate systems and judges acceptability of product. Screens analysis of raw materials and mixes. Sample preparation. Performs additional testing as required. Requirements Requires high school diploma and one (1) year of college education or technical training with emphasis on math and science. Requires computer operation aptitude (MS Office and LIMS system or similar products). Requires abilities to follow directions, provide innovative solutions, and both work independently or as a team member. Requires knowledge of refractory industry and quality assurance. Physical and Environment Requirements: Physical Activity: Requires less than 1/3 of time sitting, climbing/balancing, and stooping/kneeling/crouching/crawling. Requires 1/3 to 2/3 of time walking, using hands and fingers, reaching, and speaking/hearing. Requires more than 2/3 of time standing. Lifting: Requires lifting up to 25 pounds 1/3 to 2/3 of time, and lifting up to 50 pounds more than 2/3 of time. Vision: Requires accurate close vision, color vision, and the ability to focus. Environment: Requires 1/3 to 2/3 of time in an office setting and working near moving mechanical parts. Also requires less than 1/3 of time in wet/humid conditions, working in high, precarious places, exposed to fumes or airborne particles, vibration, outdoor weather, and in extreme heat or cold. Noise: Requires exposure to moderate noise.

New Flyer is North America's heavy-duty transit bus leader, providing sustainable mobility solutions through transit buses, technology, and infrastructure. New Flyer is a subsidiary of NFI Group, a leading independent bus and coach manufacturer and a leader in electric mass mobility solutions. Building on its 90+ year legacy of innovation, New Flyer is the only manufacturer offering all three types of zero-emission transit buses, with over 1,900 zero-emission buses delivered to date. Proudly serving all 25 of the largest transit agencies in North America, New Flyer actively supports over 35,000 heavy-duty transit buses currently operated by approximately 500 agencies. POSITION SUMMARY: This role will have you reporting to the Quality Supervisor. The successful candidate will verify that product quality is maintained, quality systems are followed, provide high quality product to the required specification in accordance with the production schedule. Provide encourage effective communication within the cell and promote Assembly Technicians. WHAT YOU WILL DO: · Inspection of production processes in manufacturing of assemblies and sub-assemblies. · Read blueprints and use a variety of testing and measuring instruments. · Prepare written reports of all defects and submit to the production supervisors in a timely manner. · Complete knowledge of the specifications and customer requirements. · Assist with any problems or difficulties which may arise from specification, drawings, and customer requirements. · Work directly with customers' inspection personnel in a courteous manner. · Perform all inspections on the coach and ensure inspection reports are complete. · Perform the release process and sale of coach. · Ensure that ISO 9001 Quality Assurance procedures are followed. · Follow up with vendors on non-conformance issues and audit completion, this is to include first article inspections. · Follows quality issues from identification through corrective action and follow up auditing. · Full knowledge of assembly products and can inspect to them as required. · Full knowledge and execution of rejects. · Perform receiving inspections and warehouse audits. · Perform all functions of SQA dealing with SCA reports, product review, auditing, corrective action, follow up. · Complete special assignments as required. · Complete work cell items and containment actions in a timely manner as they occur. · Must be able to train other Technicians in QA processes. · Must Maintain the 5S requirements as they apply to your job. Requirements · Three to Five years previous Quality experience in a fast-paced manufacturing environment preferred. · Lean Manufacturing experience · Thorough knowledge of ISO Certification process · Superior interpersonal, problem solving and communicating skills. · Superior Auto CAD, Microsoft Office computer and organizational skills. · Demonstrated ability to mentor others, and ability to work well under pressure. · Goal orientated and motivation to achieve tasks within set timelines. Hourly Pay Rate: $21.75/hr Benefits WHY JOIN US: · Apart of a team leading the world's electrification of mass mobility · Competitive Wages and comprehensive benefit package · Immediate benefit eligibility · Paid holidays and vacation · 401K with generous company match / or RRSP with generous company match) · Passionate about creating a better product, a better workplace, and a better world · Inclusive workplace culture that values and empowers team members. · On-the-job training in a continuous learning environment (we've invested 8.6M in 2022) · Advancement opportunities within our family of companies NFI Group | We Move People - YouTube New Flyer is an EEO/AA/Female/Minority/Disabled/Vets Employer. Accommodations are available at all stages of the recruitment process, at the candidates' request . NFI Group is a leading independent global bus manufacturer providing a comprehensive suite of mass transportation solutions. News and information are available at ***************** ***************** ***************** **************** ************************* ************************* and **************

Job Description Join a team that nourishes life from farm to table! Upstate Niagara Cooperative, proudly owned by 200+ local family farms, is one of America's largest and most stable dairy cooperatives. Guided by farmer- and employee-led values, we process and market high-quality milk, yogurt, dips, sour cream, cottage cheese, and more under our trusted brands: Upstate Farms , Bison , Milk for Life , and Intense Milk . Here, you'll support sustainable farming, strong communities, and the mission to deliver fresh, local dairy to families every day. We are currently seeking candidates for all shifts: 2nd & 3rd Shift. Weekend and Holiday availability required. Job Summary: Support the overall total quality focus of the manufacturing plant. Focusing on documentation and distribution of finished product and ingredient data originating from the production records. Assess and report compliance with company policies and procedures, U.S. Food and Drug Administration Regulation, GFSI Initiatives, Customer Specifications, HACCP and GMP requirements. Duties and Responsibilities: Support Quality Systems, Food Safety Policies, Procedures and practices involved in the manufacturing process Preform and/or Observe Line processing checks on packaging lines at required frequencies. Collect Line samples for Customer send out and lab Point of contact for quality concerns with production and lab Area pre-ops, post cleaning, prior to start up and in process. Assist in all investigations, customer, root cause, etc. Internal auditing, GMP, Glass-Plastic, document audits, etc. Master Sanitation checks. Input repair orders and follow up for completion as needed. Assist with HOLDS, paperwork, Ross transactions, E mail communications. Ensure product is segregated. Review of re-work from holds prior to release. Pull ingredients samples/ run testing for product identity Environment monitoring temperatures and humidity Other duties as assigned. Experience & Education Required: Associates degree in related field or GED and two years related experience or the equivalent combination of education and experience. Knowledge & Skills - Required: Must be detail oriented and highly organized. Ability to work effectively under deadlines is required. Confidentiality The QA line tech is exposed to O-AT-KA customer and product information on a consistent basis. Management Responsibility The QA Associate is an independent contributor role that operates under the guidance and direction of the Plant QA Supervisor. Work Environment Some time spent in an office environment. Incumbent must be able to use standard computer equipment (Computer, Copier, Fax, and Phone), bend reach, walk and lift up to 25 lbs. Majority of time required in the production facility where the incumbent will be exposed to slippery floors, heat, cold, and noise. Training to be completed upon hiring if not already attained. Internal Auditing Better Process School PCQI certification SQF Practitioner Pay: $24.06 -$31.28 per hour* *The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position's qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays. Upstate Niagara Cooperative, Inc. is committed to equal employment opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Are you passionate about being part of a Team that will become the most trusted medical device machining service provider? Are you tired of mundane cubicle roles? Join Team Orchard Park as a Quality Technician, state-of-the-art, inspection equipment and realize your full potential as a High Impact member of our Quality team. New employees are eligible for the following benefits effective date of hire! Medical, dental, and vision benefits Company-paid life insurance Generous Paid time off and 10 paid Holidays 401k Plan with Company Match Tuition Reimbursement Attendance Bonus paid monthly GROWTH: This is an outstanding opportunity for a Quality Technician/CMM Programmer that has an attention to detail, thrives in cross-functional teams, and is ready for the next big challenge. You will be working in a highly dynamic work environment that encourages and promotes developmental growth in many areas. MISSION: We collaborate and innovate with our customers to provide the highest quality, life enhancing medical devices in the world. Key Responsibilities: Program, operate and troubleshoot automated inspection equipment, including CMM, Smart Scopes, and VICI systems, to ensure accurate product measurements. Interpret blueprints and technical drawings using GD&T principles. Conduct First Article Inspections. Utilize manual measurement tools (e.g., micrometers, pin gages, ring gages) Conduct root cause investigations for non-conforming equipment or parts. Write, improve, and submit work instructions for review and release to ensure standardized processes. Education, Experience, and Skills: High school diploma 2 - 5 years of experience programming and operating automated inspection equipment (e.g., CMM, Smart Scopes, VICI). Ability to read and assess product drawings Demonstrate understanding of basic Quality System Regulations Working knowledge of Excel and database programs Basic understand of automated systems and programming We offer market competitive compensation. Potential salary range for this role is $25.00-$30.00. Actual pay will be determined based on experience, qualifications, geographic location, and other job-related factors permitted by law. CLICK HERE FOR A SITE TOUR! ** All job offers are contingent on passing a background check and drug test (including THC)

Buffalo News Names Sealing Devices Inc. A Winner of The Metro Buffalo Top Workplaces 2024 Award Statement of Work: Follow all company policies, procedures, and work instructions in the completion of daily activities with minimal input and supervision to ensure successful accomplishment of company objectives. Perform Receiving Inspections to verify that incoming parts, materials, and related documentation meet requirements and are suitable for use. Perform First piece, In-process, Last piece, and Final inspections per sampling plans, product requirements, and job instructions to verify product conformity. Perform First Article Inspections to ensure manufacturing die, tooling, and other manufacturing methods result in product meets customers drawing requirements. Perform customer specific required Inspections and complete Inspection reports per the stated requirements. Document, identify, and segregate nonconforming product in accordance with policies, procedures, and work instructions. Complete and submit customer documentation as required. Document, identify and segregate nonconforming product in accordance with policies, procedures and work instructions. Make requests to suppliers for missing or incorrect documentation. Use appropriate measuring devices and automated inspection equipment to perform inspections including basic programming of automated inspection equipment. Interact with other departments in a professional manner in addressing product quality and service issues. Provide other departments with information and assistance to support them in accomplishing their objectives. Contribute to and participate in improvement activities within the department and the company. Follow departmental procedures and work instructions as written and recommend improvements as necessary. Perform any other task/activity assigned by the supervisor within the scope of Company business. Maintain a safe and clean working environment by complying with policies, guidelines, and regulatory requirements per the Sealing Devices Quality System What you will need to Succeed: High School Graduate or General Education Degree (GED): Required Associate's Degree (two year college or technical school) or Work Equivalent, Field of Study: Industrial Technology or Quality related field Bachelor's Degree (four year college or technical school) Preferred, Field of Study: Industrial Technology or Quality related field Computer Literacy (MS Office), 2 plus years of experience in mechanical inspection and blueprint reading required. Knowledge of GD&T, basic statistical techniques, automated inspection experience preferred. ASQ Certified Quality Technician (CQT) preferred Benefits offered for this role: Medical/Dental/Vision Coverage Health Reimbursement Account (HRA) provided by Company 401K Paid Vacation & Holidays Free Life Insurance for Employee Flex Spending - Medical, Dental, Vision and Child Care Employee Referral Program Company Sponsored Training Profit Sharing - Earn up to 18% of your gross wages after one-year anniversary Free Employee Assistance Program Wellness Programs - Onsite Reflexology, Chair Massage, Nutritional Sessions, Chiropractic Legal Shield and Aflac Employee Recognition Program Company Celebrations - Including: Lunches, Breakfasts, Ice Cream Truck, Holiday Parties Career Advancement Opportunities Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Ability to sit or stand for extended periods of time while performing detailed inspections and working at inspection stations. Regularly required to lift, carry, and move materials or product up to 25 pounds; occasional lifting of heavier items with assistance. Frequent use of hands and fingers to handle small parts, operate measuring instruments, and input data into computer systems. Ability to perform repetitive motions of the wrists, hands, and arms during part handling and equipment use. Requires close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus for precision inspection tasks. Must be able to hear verbal instructions, alarms, and signals in a manufacturing environment. Occasional reaching, stooping, bending, turning, or crouching to retrieve or position parts and materials. Ability to work in both office and production environments, which may involve moderate noise levels, temperature variation, and use of personal protective equipment (PPE) when required. Salary ranges for this position are determined based upon the job location and can be adjusted based upon experience, reflecting our commitment to valuing the expertise and contributions of our individual team members. Salary range for this role is $22-27/hr based upon experience.

Join a team that nourishes life from farm to table! Upstate Niagara Cooperative, proudly owned by 200+ local family farms, is one of America's largest and most stable dairy cooperatives. Guided by farmer- and employee-led values, we process and market high-quality milk, yogurt, dips, sour cream, cottage cheese, and more under our trusted brands: Upstate Farms , Bison , Milk for Life , and Intense Milk . Here, you'll support sustainable farming, strong communities, and the mission to deliver fresh, local dairy to families every day. We are currently seeking candidates for all shifts: 2nd & 3rd Shift. Weekend and Holiday availability required. Job Summary: Support the overall total quality focus of the manufacturing plant. Focusing on documentation and distribution of finished product and ingredient data originating from the production records. Assess and report compliance with company policies and procedures, U.S. Food and Drug Administration Regulation, GFSI Initiatives, Customer Specifications, HACCP and GMP requirements. Duties and Responsibilities: Support Quality Systems, Food Safety Policies, Procedures and practices involved in the manufacturing process Preform and/or Observe Line processing checks on packaging lines at required frequencies. Collect Line samples for Customer send out and lab Point of contact for quality concerns with production and lab Area pre-ops, post cleaning, prior to start up and in process. Assist in all investigations, customer, root cause, etc. Internal auditing, GMP, Glass-Plastic, document audits, etc. Master Sanitation checks. Input repair orders and follow up for completion as needed. Assist with HOLDS, paperwork, Ross transactions, E mail communications. Ensure product is segregated. Review of re-work from holds prior to release. Pull ingredients samples/ run testing for product identity Environment monitoring temperatures and humidity Other duties as assigned. Experience & Education Required: Associates degree in related field or GED and two years related experience or the equivalent combination of education and experience. Knowledge & Skills - Required: Must be detail oriented and highly organized. Ability to work effectively under deadlines is required. Confidentiality The QA line tech is exposed to O-AT-KA customer and product information on a consistent basis. Management Responsibility The QA Associate is an independent contributor role that operates under the guidance and direction of the Plant QA Supervisor. Work Environment Some time spent in an office environment. Incumbent must be able to use standard computer equipment (Computer, Copier, Fax, and Phone), bend reach, walk and lift up to 25 lbs. Majority of time required in the production facility where the incumbent will be exposed to slippery floors, heat, cold, and noise. Training to be completed upon hiring if not already attained. Internal Auditing Better Process School PCQI certification SQF Practitioner Pay: $24.06 -$31.28 per hour* *The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position's qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays. Upstate Niagara Cooperative, Inc. is committed to equal employment opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Parallel Employment group in partnership with a customer in Lancaster has an exciting opening for a Quality Control Technician. In this role, you will verify product conformance in a fast paced environment with a large range of products. Additionally you will be receiving First Piece, In-process, Last Piece, Final and First Article Inspections. Responsibilities: · Follow all company policies, procedures, and work instructions in the completion of daily activities with minimal input and supervision to ensure successful accomplishment of company objectives. · Perform Receiving Inspections to verify that incoming parts, materials, and related documentation meet requirements and are suitable for use. · Perform First piece, In-process, Last piece, and Final inspections per sampling plans, product requirements, and job instructions to verify product conformity. · Perform First Article Inspections to ensure manufacturing die, tooling, and other manufacturing methods result in product meets customers drawing requirements. · Perform customer specific required Inspections and complete Inspection reports per the stated requirements. · Document, identify, and segregate nonconforming product in accordance with policies, procedures, and work instructions. · Make requests to suppliers for missing or incorrect documentation. · Use appropriate measuring devices and automated inspection equipment to perform inspections including basic programming of automated inspection equipment. · Interact with other departments in a professional manner in addressing product quality and service issues. · Provide other departments with information and assistance to support them in accomplishing their objectives. · Contribute to and participate in improvement activities within the department and the company. · Follow departmental procedures and work instructions as written and recommend improvements as necessary. · Perform any other task/activity assigned by the supervisor within the scope of Company business. · Maintain a safe and clean working environment by complying with policies, guidelines, and regulatory requirements Requirements High school diploma or equivalent required. Associate degree is preferred. 1 year of experience in inspection required. C ommunication - Advanced professional written and oral communication skills, including presentation skills. Safety Awareness - Ability to identify and correct conditions that affect employee safety. Quality Management - Provides high quality services, processes, programs and products while consistently seeking ways to improve outcomes and enhance service. Customer Oriented - Ability to take care of the customers' needs while following company procedures. Honesty / Integrity - Ability to be truthful and be seen as credible in the workplace. Teamwork -Working as a productive member of a cohesive group toward a common goal and contributing to team development and effective team dynamics. Parallel Employment Group is an Equal Opportunity Employer #IND456

Work Schedule Standard (Mon-Fri) Environmental Conditions Able to lift 40 lbs. without assistance, Adherence to all Good Manufacturing Practices (GMP) Safety Standards, Cold Room/Freezers -22degreesF/-6degrees C, Some degree of PPE (Personal Protective Equipment) required (safety glasses, gowning, gloves, lab coat, ear plugs etc.), Warehouse, Will work with hazardous/toxic materials Job Description As part of the Thermo Fisher Scientific team, you'll discover meaningful work that makes a positive impact on a global scale. Join our colleagues in bringing our Mission to life every single day to enable our customers to make the world healthier, cleaner and safer. We provide our global teams with the resources needed to achieve individual career goals while helping to take science a step beyond by developing solutions for some of the world's toughest challenges, like protecting the environment, making sure our food is safe or helping find cures for cancer. Location/Division Specific Information: First Shift: Monday - Friday 7am - 330pm (may require start and end time flexibility based on training and production needs) The Thermo Fisher Scientific BioProduction division, located at 3175 Staley Road Grand Island NY 14072, supports developers and manufacturers of biological-based therapeutics and vaccines with a portfolio of premium cell culture media and buffers as well as on site custom services dedicated to upstream cell culture, downstream purification, analytics for detection and quantitation of process/product impurities, and a catalog of single-use solutions spanning the biologics workflow. How Will You Make an Impact?: We need a motivated individual with excellent communication and laboratory skills to coordinate and complete planned and detailed activities within a quality system to ensure product, process, system, or equipment quality requirements are met. A Day in the Life: Perform wet chemical analyses based on both internal and Compendia (USP, EP, ACS, etc) based methodologies on raw materials (i.e. salts, sugars, amino acids, vitamins, etc) . Perform physical inspection and documentation review of incoming manufacturing components. Education: Required: High School Diploma required Preferred: AAS or Bachelors degree in Chemistry, Biology, or other Sciences Experience: Preferred: Experience in a cGMP environment/QC or QA related field Knowledge, Skills, Abilities: Required: Strong organizational skills and the ability to work independently. Required: Ability to work in a high paced team environment, prioritize work accordingly. Required: General digital literacy, specifically in Microsoft office programs. Preferred: 1-2 years of Chemistry lab experience (wet Chemistry lab work and safety protocols). Physical Requirements / Work Environment: Able to lift 40 lbs. without assistance Adherence to all Good Manufacturing Practices (GMP) Safety Standards Occasionally required to enter Cold Room/Freezers -22degreesF/-6degrees C Some degree of PPE (Personal Protective Equipment) required (safety glasses, gowning, gloves, lab coat, ear plugs etc.) Will work with hazardous/toxic materials What We Offer: Compensation Competitive Pay Performance Related Bonus where eligible Annual merit performance-based increase Excellent Benefits Medical benefits Paid Time Off/Annual Leave Employee Referral Bonus Career Advancement Opportunities Compensation and Benefits The hourly pay range estimated for this position based in New York is $16.95-$25.42. This position may also be eligible to receive a variable annual bonus based on company, team, and/or individual performance results in accordance with company policy. We offer a comprehensive Total Rewards package that our U.S. colleagues and their families can count on, which includes: A choice of national medical and dental plans, and a national vision plan, including health incentive programs Employee assistance and family support programs, including commuter benefits and tuition reimbursement At least 120 hours paid time off (PTO), 10 paid holidays annually, paid parental leave (3 weeks for bonding and 8 weeks for caregiver leave), accident and life insurance, and short- and long-term disability in accordance with company policy Retirement and savings programs, such as our competitive 401(k) U.S. retirement savings plan Employees' Stock Purchase Plan (ESPP) offers eligible colleagues the opportunity to purchase company stock at a discount For more information on our benefits, please visit: *****************************************************

Job Description GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more. The GTI team consists of more than 50 professionals spanning from fabrication and engineering to government and military specialists. Our combination of expertise allows us to provide top quality solutions and customer service for various industries and missions. The QC Technician is responsible for the inspection and testing of materials and finished products at various stages of the manufacturing process to ensure they comply with all applicable laws, industry codes & standards, as well as Company and Customer specifications/standards. Job Responsibilities: Develop and maintain inspection reports. Ensure compliance with federal and state laws, as well as company standards and specifications. Maintain calibration of quality control equipment. Perform inspections across all stages of production. Prepare and maintain test data for review. Evaluate data and draft reports, noting any relevant deviations from existing standards. Identify areas for quality control improvement and implement new methods accordingly. Communicate quality or compliance concerns with urgency. Other duties as assigned by the QA Manager. Required Qualifications: High school diploma or general education degree (GED) required. Solid understanding of measuring, inspection and test equipment. Minimum of 2-5 years of inspection and/or production experience in the metals fabrication industry. Visual weld and welding inspection experience. Proficiency with Microsoft Office programs, specifically Excel. Strong working knowledge of various mathematical concepts including fractions, ratios, and proportions. Ability to lift and/or move up to 50 pounds occasionally. Specific vision abilities required include close vision, color vision, and the ability to adjust focus. (minimum required visual acuity - 20/20 corrected or uncorrected) Demonstrated ability to work independently with minimal supervision. Excellent organizational skills. Demonstrated ability to analyze and interpret information. Ability to read and interpret mechanical, electrical, and fabrication drawings. Preferred Qualifications: Associate or bachelor's Degree in a related field. AWS Certified Welding Inspector - CWI. GrowTech Industries, LLC is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Professional Plastics is a leading distributor of high-performance engineering plastic shapes. We provide the widest range of engineering plastics, composites & technical ceramics in the marketplace. Established in 1984, Professional Plastics has grown to 22 locations across the USA, Singapore & Taiwan. We are a family-owned and operated business that values hard work, integrity and ethics. Professional Plastics is currently offering great career opportunities. We are interested in hiring motivated professionals who share our core values and desire to be part of a dynamic team. Professional Plastics is an equal opportunity employer and offers competitive pay and benefits. Position Summary: The Quality Technician ensures that product conforms to all customer expectations through documented inspection and testing procedures utilizing precision measuring/testing equipment and accurately interpreting specifications and blueprint GD&T requirements. This position requires the ability to develop procedures and write clear work instructions and inspection plans. This may also include preparation of PPAP documentation and other PPAP support activities such as dimensional layouts, gage verification, data analysis, material certification review, and maintaining traceability. In collaboration with engineering, manufacturing, and quality leadership, the Quality Technician participates in process improvement activities to optimize efficiencies and improve product quality. Essential Duties and Responsibilities: Include the following, as well as other duties that may be assigned. Establish an understanding of customer product requirements. Perform testing and inspection on incoming materials from vendors and outgoing product shipping to customers. Read and interpret blueprints and drawings with an understanding of GD&T. Interpret specifications and other technical industry and customer documentation. Maintain calibration records for measuring devices and equipment. Perform process capability studies, including obtaining and analyzing data using statistical methods. Take quick action when a nonconformance is detected. Utilize ERP system to perform effective containment activities. Perform root cause analysis and develop permanent corrective actions. Access customer portals for documentation and data submittals. Support Quality Control incoming, in-process, and final inspection needs. Ensure all internal and customer requirements are met prior to product release. Support certification and customer audits. Perform Internal Audits. Establish collaborative working relationships with customers, vendors, and all internal departments. Multitask - manage several projects at once. Present data and other information in an organized and appropriate manner Minimum Qualifications: To perform the job successfully, the individual must have the following minimum qualifications: Knowledge, Skills, and Abilities: Knowledge of Geometric Dimensioning & Tolerancing (GD&T) Ability to read and interpret drawing/blueprints/schematics Experience conducting and/or preparing for audits Understanding of the AS9100 or ISO9001 standard Developing and maintaining effective customer relationships Proficiency in standard office and database programs/equipment Education and Experience: Required and preferred educational and experiential qualifications Associate degree in Engineering/Manufacturing Technology or other relevant technical field 3 years QA or QC experience in a manufacturing environment Metrology experience Experience interacting with customers Benefits: DailyPay Earned Wage Access Medical Dental Vision Flexible Spending Account 401K Plan with Company Match Basic Life and AD&D Voluntary Life Insurance Long Term Disability Employee Assistance Program Paid Time Off (PTO) Paid Holidays Morgan Stanley Financial Advice Short Term Disability Accident, Critical Illness and Hospital Indemnity MetLife Legal Plan Norton LifeLock United Pet Care Discount Program LifeMart Employee Discounts Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. While performing the duties of this position, the employee is regularly required to stand, walk, reach with hands or arms and talk or hear. The employee is frequently required to type, use telephonic devices, and view data on computer screens. The employee is occasionally required to use hands or fingers, handle or feel objects, tools, or controls. The employee is occasionally required to sit and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this Job, the employee is frequently exposed to office equipment and moving mechanical parts. The noise level in the work environment is usually moderate, however certain areas of the work environment may have elevated noise levels and require hearing protection. Job Type: Full-time Equal Opportunity Employer: Disability/Veteran

About Us iNRCORE, LLC is a world-class manufacturer of custom and catalog magnetic solutions. With employees worldwide, iNRCORE is a growing international partner with Gowanda Components Group and Bicron Manufacturing, to design, manufacture and sell specialty electronic components. For over 70 years iNRCORE has deployed reliable and intelligent solutions to power the world's next generation of systems. iNRCORE is committed to supplying the highest level of compliance and innovation to customers' most demanding applications from the frontlines of defense to the frontiers of space exploration. iNRCORE's power and signal magnetic components are utilized to help save lives, generate powerful connections and further the knowledge of the cosmos. When failure is not an option, the world trusts iNRCORE. iNRCORE models itself after its products - Rugged to the Core. About the Position The Quality Inspector is responsible for inspecting, auditing, and reporting on materials, processes, and products using variable and attribute measuring instruments and techniques to ensure conformance with the company's quality standards. Essential Duties and Responsibilities Inspect and approve incoming materials by confirming specifications, conducting visual and mechanical measurement tests, and rejecting and returning nonconforming materials. Inspects in-process and/or finished products by confirming specifications and drawings, conducting visual and mechanical measurement testing, returning nonconforming product for rework, and verifying and validating the completed rework. Documents inspection results by completing the required reports and logs on a timely basis while summarizing rework and scrap while inputting the data into the respective database. Inspect high reliability parts based on the J-STD-001 and Space Addendum and accept/reject based on IPC-A-610 requirements under a high-power microscope. Accomplishes quality and organization mission by completing related results as needed. Reading and interpreting electronic drawings and customer supplied blueprints and drawings and have a basic knowledge of statistical techniques. Knowing the definitions of critical, major, and minor characteristics. Schedule: Monday through Friday 5 am to 1:30 pm Qualifications Education/Experience: A two-year technical certificate or equivalent experience required. Knowledge/Skills/Abilities: Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. To perform this job successfully, an individual should have knowledge and expertise in using Microsoft Office software (Outlook, Excel, Word, and PowerPoint) Must have the ability to read and interpret electronic drawings and customer supplied blueprints and drawings and have a basic knowledge of statistical techniques. Must have experience using electronic and mechanical testing equipment. Prefers someone have a good working knowledge of using and referencing military and industry standards, Prefers someone who has a general knowledge of ASME Y14.5M, working knowledge of GD&T, and must understand the x, y, and z coordinate system. Must know basic statistical terms and techniques, how to enter and plot data as well as recognize out-of-control conditions. Must understand types of measurement, measurement terminology and the diverse types of measurement scales. Must know the difference between accuracy and precision and be able to select the appropriate measuring tools and techniques. Must understand lot level traceability based on product, processes, and raw material. Must have a strong knowledge of basic mathematical operations and perform measurement conversions; be able to solve for x; add and subtract degrees, minutes, and seconds. Why should you join our team? Our team is growing! We collaborate and use innovation to build meaningful relationships, both internally with colleagues and externally with customers. Our business casual dress code allows you personality to shine through. Our new facility is clean, spacious, and located near I-95, with a variety of local restaurants easily accessible. Although you can occasionally enjoy a variety of snacks on-site too! We are committed to providing our employees with a comprehensive package that stands as one of the most competitive within the manufacturing and engineering industries. All benefits start immediately, which means no waiting periods for you or your family! Medical, Dental, Vision, & Prescription plans Flexible Spending Accounts (FSA) Health Savings Accounts (HSA) 401K Program with Employer Match Group Life Insurance Long Term Disability Coverage Vacation, Sick, and Floating Holidays (in addition to 7 paid holidays) This position is not eligible for relocation allowance. iNRCORE, LLC is an equal-opportunity organization. We recruit, employ, train, compensate and promote without regard to race, religion, creed, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, veteran status, or any other basis protected by applicable federal, state or local law. At iNRCORE, we are committed to fostering an inclusive, accessible environment, where all employees are valued and supported. If you are a candidate with a disability and need an accommodation to complete the application process, please contact Caity Dawson at *************************. Include your full name and the best way to reach you, along with the accommodation needed to assist you with the application process. Veterans encouraged to apply.

About Us iNRCORE, LLC is a world-class manufacturer of custom and catalog magnetic solutions. With employees worldwide, iNRCORE is a growing international partner with Gowanda Components Group and Bicron Manufacturing, to design, manufacture and sell specialty electronic components. For over 70 years iNRCORE has deployed reliable and intelligent solutions to power the world's next generation of systems. iNRCORE is committed to supplying the highest level of compliance and innovation to customers' most demanding applications from the frontlines of defense to the frontiers of space exploration. iNRCORE's power and signal magnetic components are utilized to help save lives, generate powerful connections and further the knowledge of the cosmos. When failure is not an option, the world trusts iNRCORE. iNRCORE models itself after its products - Rugged to the Core. About the Position The Quality Inspector is responsible for inspecting, auditing, and reporting on materials, processes, and products using variable and attribute measuring instruments and techniques to ensure conformance with the company's quality standards. Essential Duties and Responsibilities Inspect and approve incoming materials by confirming specifications, conducting visual and mechanical measurement tests, and rejecting and returning nonconforming materials. Inspects in-process and/or finished products by confirming specifications and drawings, conducting visual and mechanical measurement testing, returning nonconforming product for rework, and verifying and validating the completed rework. Documents inspection results by completing the required reports and logs on a timely basis while summarizing rework and scrap while inputting the data into the respective database. Inspect high reliability parts based on the J-STD-001 and Space Addendum and accept/reject based on IPC-A-610 requirements under a high-power microscope. Accomplishes quality and organization mission by completing related results as needed. Reading and interpreting electronic drawings and customer supplied blueprints and drawings and have a basic knowledge of statistical techniques. Knowing the definitions of critical, major, and minor characteristics. Schedule: Monday through Friday 5 am to 1:30 pm Qualifications Education/Experience: A two-year technical certificate or equivalent experience required. Knowledge/Skills/Abilities: Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. To perform this job successfully, an individual should have knowledge and expertise in using Microsoft Office software (Outlook, Excel, Word, and PowerPoint) Must have the ability to read and interpret electronic drawings and customer supplied blueprints and drawings and have a basic knowledge of statistical techniques. Must have experience using electronic and mechanical testing equipment. Prefers someone have a good working knowledge of using and referencing military and industry standards, Prefers someone who has a general knowledge of ASME Y14.5M, working knowledge of GD&T, and must understand the x, y, and z coordinate system. Must know basic statistical terms and techniques, how to enter and plot data as well as recognize out-of-control conditions. Must understand types of measurement, measurement terminology and the diverse types of measurement scales. Must know the difference between accuracy and precision and be able to select the appropriate measuring tools and techniques. Must understand lot level traceability based on product, processes, and raw material. Must have a strong knowledge of basic mathematical operations and perform measurement conversions; be able to solve for x; add and subtract degrees, minutes, and seconds. Why should you join our team? Our team is growing! We collaborate and use innovation to build meaningful relationships, both internally with colleagues and externally with customers. Our business casual dress code allows you personality to shine through. Our new facility is clean, spacious, and located near I-95, with a variety of local restaurants easily accessible. Although you can occasionally enjoy a variety of snacks on-site too! We are committed to providing our employees with a comprehensive package that stands as one of the most competitive within the manufacturing and engineering industries. All benefits start immediately, which means no waiting periods for you or your family! Medical, Dental, Vision, & Prescription plans Flexible Spending Accounts (FSA) Health Savings Accounts (HSA) 401K Program with Employer Match Group Life Insurance Long Term Disability Coverage Vacation, Sick, and Floating Holidays (in addition to 7 paid holidays) This position is not eligible for relocation allowance. iNRCORE, LLC is an equal-opportunity organization. We recruit, employ, train, compensate and promote without regard to race, religion, creed, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, veteran status, or any other basis protected by applicable federal, state or local law. At iNRCORE, we are committed to fostering an inclusive, accessible environment, where all employees are valued and supported. If you are a candidate with a disability and need an accommodation to complete the application process, please contact Caity Dawson at *************************. Include your full name and the best way to reach you, along with the accommodation needed to assist you with the application process. Veterans encouraged to apply.

Job Description About Us iNRCORE, LLC is a world-class manufacturer of custom and catalog magnetic solutions. With employees worldwide, iNRCORE is a growing international partner with Gowanda Components Group and Bicron Manufacturing, to design, manufacture and sell specialty electronic components. For over 70 years iNRCORE has deployed reliable and intelligent solutions to power the world's next generation of systems. iNRCORE is committed to supplying the highest level of compliance and innovation to customers' most demanding applications from the frontlines of defense to the frontiers of space exploration. iNRCORE's power and signal magnetic components are utilized to help save lives, generate powerful connections and further the knowledge of the cosmos. When failure is not an option, the world trusts iNRCORE. iNRCORE models itself after its products - Rugged to the Core. About the Position The Quality Inspector is responsible for inspecting, auditing, and reporting on materials, processes, and products using variable and attribute measuring instruments and techniques to ensure conformance with the company's quality standards. Essential Duties and Responsibilities Inspect and approve incoming materials by confirming specifications, conducting visual and mechanical measurement tests, and rejecting and returning nonconforming materials. Inspects in-process and/or finished products by confirming specifications and drawings, conducting visual and mechanical measurement testing, returning nonconforming product for rework, and verifying and validating the completed rework. Documents inspection results by completing the required reports and logs on a timely basis while summarizing rework and scrap while inputting the data into the respective database. Inspect high reliability parts based on the J-STD-001 and Space Addendum and accept/reject based on IPC-A-610 requirements under a high-power microscope. Accomplishes quality and organization mission by completing related results as needed. Reading and interpreting electronic drawings and customer supplied blueprints and drawings and have a basic knowledge of statistical techniques. Knowing the definitions of critical, major, and minor characteristics. Schedule: Monday through Friday 5 am to 1:30 pm Qualifications Education/Experience: A two-year technical certificate or equivalent experience required. Knowledge/Skills/Abilities : Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. To perform this job successfully, an individual should have knowledge and expertise in using Microsoft Office software (Outlook, Excel, Word, and PowerPoint) Must have the ability to read and interpret electronic drawings and customer supplied blueprints and drawings and have a basic knowledge of statistical techniques. Must have experience using electronic and mechanical testing equipment. Prefers someone have a good working knowledge of using and referencing military and industry standards, Prefers someone who has a general knowledge of ASME Y14.5M, working knowledge of GD&T, and must understand the x, y, and z coordinate system. Must know basic statistical terms and techniques, how to enter and plot data as well as recognize out-of-control conditions. Must understand types of measurement, measurement terminology and the diverse types of measurement scales. Must know the difference between accuracy and precision and be able to select the appropriate measuring tools and techniques. Must understand lot level traceability based on product, processes, and raw material. Must have a strong knowledge of basic mathematical operations and perform measurement conversions; be able to solve for x; add and subtract degrees, minutes, and seconds. Why should you join our team? Our team is growing! We collaborate and use innovation to build meaningful relationships, both internally with colleagues and externally with customers. Our business casual dress code allows you personality to shine through. Our new facility is clean, spacious, and located near I-95, with a variety of local restaurants easily accessible. Although you can occasionally enjoy a variety of snacks on-site too! We are committed to providing our employees with a comprehensive package that stands as one of the most competitive within the manufacturing and engineering industries. All benefits start immediately, which means no waiting periods for you or your family! Medical, Dental, Vision, & Prescription plans Flexible Spending Accounts (FSA) Health Savings Accounts (HSA) 401K Program with Employer Match Group Life Insurance Long Term Disability Coverage Vacation, Sick, and Floating Holidays (in addition to 7 paid holidays) This position is not eligible for relocation allowance. iNRCORE, LLC is an equal-opportunity organization. We recruit, employ, train, compensate and promote without regard to race, religion, creed, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, veteran status, or any other basis protected by applicable federal, state or local law. At iNRCORE, we are committed to fostering an inclusive, accessible environment, where all employees are valued and supported. If you are a candidate with a disability and need an accommodation to complete the application process, please contact Caity Dawson at *************************. Include your full name and the best way to reach you, along with the accommodation needed to assist you with the application process. Veterans encouraged to apply.

+ This position involves performing X-Ray Fluorescence (XRF) analysis and other analytical methods to determine major, minor, and trace elements in raw materials, plant products, and materials submitted by customers and clients using established methods and procedures. Responsibilities + Perform spectroscopic analysis and other analytical methods using computer-controlled X-Ray spectrometer, including all ancillary equipment and software. + Accurately weigh samples and prepare them for analysis using methods such as fused bead, pressed pellet, and loose powder, while properly maintaining platinum sample preparation materials. + Utilize appropriate calibration, correction standards, and quality control criteria to ensure data precision, repeatability, and accuracy. + Archive and dispose of samples, recognize instrumental and equipment issues, assist with routine maintenance service and repairs, and maintain and order supplies when necessary. + Continuously evaluate, modify, and improve existing methods and create new methods for sample evaluation and analysis. + Communicate with plant production group and technical staff to obtain analytical schedules and priorities. + Maintain accurate records of analysis and report findings and test results, entering data into the Quality Control Database. + Provide occasional weekend coverage based on production needs. + Perform other duties as assigned. Essential Skills + Minimum two-year college degree in chemistry, chemical technology, or equivalent experience in chemistry. + Understanding of X-ray spectroscopy theory and familiarity with WD-XRF unit and ZSX quantitative and SQX semi-quantitative software. + Full understanding of quality assurance and quality control practices. + Knowledge of ISO 9001:2015 and its application in the workplace and lab activities. Additional Skills & Qualifications + Strong mathematics and computer skills with familiarity of Microsoft Office 365 software. + Effective time management skills to manage priorities, turnaround time, and production requirements. + Ability to work independently and in a team environment. + Interpersonal skills to interact with staff, clients, and vendors. + Written and oral communication skills for recording and reporting analytical data, preparing documentation such as SOPs, and training QC technicians. + Ability to diagnose and perform minor repairs and upkeep of instrumentation. + Capability to recommend equipment purchases and maintain stock of specialized consumables. Work Environment + This role is based in an industrial lab setting with less cleanliness. + The work schedule is Monday through Friday from 7am to 3:30pm, with occasional weekend work required based on production needs. + Benefits include company-paid life insurance, an annual safety shoe allowance, and uniform availability. Job Type & Location This is a Contract to Hire position based out of Niagara Falls, NY. Pay and Benefits The pay range for this position is $20.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Niagara Falls,NY. Application Deadline This position is anticipated to close on Jan 19, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

Buffalo News Names Sealing Devices Inc. A Winner of The Metro Buffalo Top Workplaces 2024 Award Statement of Work: * Follow all company policies, procedures, and work instructions in the completion of daily activities with minimal input and supervision to ensure successful accomplishment of company objectives. * Perform Receiving Inspections to verify that incoming parts, materials, and related documentation meet requirements and are suitable for use. * Perform First piece, In-process, Last piece, and Final inspections per sampling plans, product requirements, and job instructions to verify product conformity. * Perform First Article Inspections to ensure manufacturing die, tooling, and other manufacturing methods result in product meets customers drawing requirements. * Perform customer specific required Inspections and complete Inspection reports per the stated requirements. * Document, identify, and segregate nonconforming product in accordance with policies, procedures, and work instructions. * Complete and submit customer documentation as required. * Document, identify and segregate nonconforming product in accordance with policies, procedures and work instructions. * Make requests to suppliers for missing or incorrect documentation. * Use appropriate measuring devices and automated inspection equipment to perform inspections including basic programming of automated inspection equipment. * Interact with other departments in a professional manner in addressing product quality and service issues. * Provide other departments with information and assistance to support them in accomplishing their objectives. * Contribute to and participate in improvement activities within the department and the company. * Follow departmental procedures and work instructions as written and recommend improvements as necessary. * Perform any other task/activity assigned by the supervisor within the scope of Company business. * Maintain a safe and clean working environment by complying with policies, guidelines, and regulatory requirements per the Sealing Devices Quality System What you will need to Succeed: * High School Graduate or General Education Degree (GED): Required * Associate's Degree (two year college or technical school) or Work Equivalent, Field of Study: Industrial Technology or Quality related field * Bachelor's Degree (four year college or technical school) Preferred, Field of Study: Industrial Technology or Quality related field * Computer Literacy (MS Office), 2 plus years of experience in mechanical inspection and blueprint reading required. * Knowledge of GD&T, basic statistical techniques, automated inspection experience preferred. * ASQ Certified Quality Technician (CQT) preferred Benefits offered for this role: * Medical/Dental/Vision Coverage * Health Reimbursement Account (HRA) provided by Company * 401K * Paid Vacation & Holidays * Free Life Insurance for Employee * Flex Spending - Medical, Dental, Vision and Child Care * Employee Referral Program * Company Sponsored Training * Profit Sharing - Earn up to 18% of your gross wages after one-year anniversary * Free Employee Assistance Program * Wellness Programs - Onsite Reflexology, Chair Massage, Nutritional Sessions, Chiropractic * Legal Shield and Aflac * Employee Recognition Program * Company Celebrations - Including: Lunches, Breakfasts, Ice Cream Truck, Holiday Parties * Career Advancement Opportunities Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. * Ability to sit or stand for extended periods of time while performing detailed inspections and working at inspection stations. * Regularly required to lift, carry, and move materials or product up to 25 pounds; occasional lifting of heavier items with assistance. * Frequent use of hands and fingers to handle small parts, operate measuring instruments, and input data into computer systems. * Ability to perform repetitive motions of the wrists, hands, and arms during part handling and equipment use. * Requires close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus for precision inspection tasks. * Must be able to hear verbal instructions, alarms, and signals in a manufacturing environment. * Occasional reaching, stooping, bending, turning, or crouching to retrieve or position parts and materials. * Ability to work in both office and production environments, which may involve moderate noise levels, temperature variation, and use of personal protective equipment (PPE) when required. Salary ranges for this position are determined based upon the job location and can be adjusted based upon experience, reflecting our commitment to valuing the expertise and contributions of our individual team members. Salary range for this role is $22-27/hr based upon experience.

Job DescriptionQuality Control Technician (2nd Shift - 3:30 - Midnight) Also known as: Quality Inspector, QC Inspector, QA Technician, Quality Assurance Technician, Manufacturing Quality Technician, Welding Inspector, Metal Fabrication Inspector, Structural Steel Inspector, Production Quality Technician Location: Buffalo, NY | Schedule: Monday-Friday, 3:30 PM-12:00 AM | Pay range: 20-25 an hour with Shift differential GTI Fabrication manufactures custom modular structures, energy storage enclosures, and container-based systems for military, defense, energy, and commercial industries. We specialize in metal fabrication, welding, assembly, structural steel, and modular construction at our Buffalo, NY facility. We are hiring a 2nd Shift Quality Control Technician (Quality Inspector / QC Inspector) to perform inspections on welded, fabricated, and assembled components throughout the manufacturing process. Responsibilities Perform incoming, in-process, and final inspections on fabricated metal parts, welds, and assemblies Conduct visual weld inspections and dimensional inspections Read and interpret blueprints, weld symbols, fabrication drawings, and mechanical prints Maintain accurate QC reports, inspection logs, and test data Calibrate and maintain measurement tools and QC equipment Identify nonconformities (NCRs) and communicate issues to supervisors Support continuous improvement for quality assurance and welding quality Work closely with fabrication, welding, assembly, and engineering teams Qualifications 2-5 years of experience as a Quality Control Technician, Quality Inspector, QC Inspector, Welding Inspector, or Manufacturing Quality Technician Experience with weld inspection and metal fabrication inspection Proficiency using calipers, gauges, tape measures, squares, and weld inspection tools Ability to read and interpret mechanical drawings, fabrication prints, and electrical diagrams Strong math skills (fractions, decimals, tolerances) Ability to lift 50 lbs and work in a shop-floor production environment High school diploma or GED Preferred: AWS CWI certification or working toward certification Experience in welding, structural steel, modular manufacturing, or industrial fabrication GrowTech Industries, LLC is an equal opportunity employer. 2nd Shift - Monday-Friday 3:30 - Midnight