Quality assurance technician jobs in Hartford, CT - 429 jobs

************************************************************************************************************************************* Work Shift: M-F, 3:00pm - 11:00pm Set up molds, start up/trouble shoot molding process. Fully capable to work on any molds and all auxiliary equipment. Work with trainee, as required ESSENTIAL DUTIES & RESPONSIBILITIES Set molds in presses and run production using pre-existing processes using the established process disc or print out if no disc exists Train process technician trainee as needed Troubleshoot molding processes and make basic adjustments to ensure quality and efficiency Troubleshoot molding machine/tooling malfunctions and communicate information with repair Provide and implement ideas to improve the efficiency of the molding department Solve quality problems and work with quality department to identify root causes Spray mold with “Mold Saver” before removing a clean mold that has finished running Communicate problems, needs and important information to supervisor Other duties as assigned Practice good housekeeping and appropriate measures to prevent pollution or other negative impacts on the environment EDUCATION & EXPERIENCE REQUIREMENTS High School diploma or equivalent 2-5 years of experience working with molds (mold setting and injection mold processing) in a manufacturing environment Experience troubleshooting Experience with forklift and pallet jack operation, preferred Knowledge of plastic materials and their processing characteristics Experience with computer controlled machines Experience with Sumitomo machines and robots, preferred SKILLS & ABILITIES Excellent communication skills Ability to read and understand work instructions Mechanical aptitude Use of hand tools and precision measuring/testing instruments Ability to climb up and down ladders frequently WORKING CONDITIONS & PHYSICAL DEMANDS Manufacturing environment. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Frequent stooping and bending. Regularly required to sit or stand and move about the facility. Physical ability to lift up to 70 pounds. TRAVEL REQUIRED None

Bestica is seeking a travel Cath Lab Technologist for a travel job in Bridgeport, Connecticut. Job Description & Requirements Specialty: Cath Lab Technologist Discipline: Allied Health Professional Duration: 13 weeks 40 hours per week Shift: 10 hours, days Employment Type: Travel 11388816 Cardiovascular Tech - Card Cath Technologist DESCRIPTION: Job Title: Cardiovascular Tech - Card Cath Technologist Location: Bridgeport, CT Contract Type: Travel Shift: 40 Hrs, 4x10, 7a-5:30p + call. Call requirement: 1 day a week, and 1 weekend a month, 5:30pm-7:00am overnight, and weekend is Friday 5:30p to Monday 7am. Contract Length: 13 weeks Interventional Technologist/Cardiovascular Specialist Tech/Cath Lab Tech Busy Cath Lab searching for experienced team-oriented tech to support. Experience with structural heart preferred. 3 years of Cath lab experience required. Certifications: Connecticut ARRT license, BLS, ACLS Required. RCIS preferred. 11388816 Cardiovascular Tech - Card Cath Technologist DESCRIPTION: Job Title: Cardiovascular Tech - Card Cath Technologist Location: Bridgeport, CT Contract Type: Travel Contract Length: 13 weeks Shift: 40 Hrs, 4x10, 7a-5:30p + call. Call requirement: 1 day a week, and 1 weekend a month, 5:30pm-7:00am overnight, and weekend is Friday 5:30p to Monday 7am. Interventional Technologist/Cardiovascular Specialist Tech/Cath Lab Tech Busy Cath Lab searching for experienced team-oriented tech to support. Experience with structural heart preferred. 3 years of Cath lab experience required. Certifications: Connecticut ARRT license, BLS, ACLS Required. RCIS preferred. About Bestica We are a trusted provider of solutions in Information Technology and Healthcare sectors to the DoD, Federal and Commercial markets. Our guiding principle and core values help us care for our people and the community; and build a culture of excellence which in turn helps us achieve our organizational objective of exceeding customer's expectations in each and every project. Headquartered in San Antonio, TX, we were founded in 2005 and are certified as an 8(a) Business. Benefits Referral bonus

As a Microbiological Lab Analyst, you will play a vital role in ensuring the integrity and safety of food, beverage, and environmental samples through meticulous testing and analysis. Your work will support our clients by providing accurate data and insights. Responsibilities + Receive, log, and label incoming samples following chain-of-custody procedures. + Verify sample integrity and storage conditions upon arrival. + Perform qualitative and quantitative testing for pathogens and indicator organisms using qPCR or ELFA technologies. + Assist in conducting shelf-life studies, challenge studies, and environmental monitoring analyses. + Prepare, dilute, and plate samples using standard ISO, BAM, USDA-FSIS, and FDA methods. + Record and verify lab data for accuracy before releasing client pathogen reports. + Communicate findings to experienced staff and assist with client inquiries. + Follow laboratory safety protocols and maintain a contamination-free workspace. + Adhere to ISO quality management standards and regulatory compliance requirements. + Operate and maintain laboratory equipment, performing routine maintenance and troubleshooting. + Assist with proficiency testing and participate in internal training programs. + Support special projects, including new product testing. Essential Skills + Proficiency in laboratory techniques, including pipetting and aseptic techniques. + Strong microbiology skill set with knowledge in PCR, sterile processing, and titration. + Ability to adapt to workflow changes and maintain attention to detail in data entry. + Experience in microbiology testing on food, with 1 to 2 years of experience with a degree or 4 to 5 years without a degree. Additional Skills & Qualifications + Basic microbiology testing on food. + Strong data entry skills with a focus on accuracy. Work Environment You will work in a small microbiology testing lab focused on generating data for clients. The work environment is relaxed but can fluctuate with client demands. The position includes a rotating shift schedule, working Monday to Friday from 8:30 am to 4:30 pm, and Tuesday to Saturday with an early finish on Saturday. Job Type & Location This is a Contract to Hire position based out of Farmington, CT. Pay and Benefits The pay range for this position is $23.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Farmington,CT. Application Deadline This position is anticipated to close on Jan 18, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

ID 2025-17966 Element has an opportunity for a Cleanroom Quality Technician. The Cleanroom Quality Technician is responsible to ensure that all company and customer technical and regulatory requirements are followed within the Precision Cleaning Division. This person will be responsible to ensure processing tanks are cleaned, filtered and meet specification requirements by performing weekly titrations. Cleaning of the cleanroom will be performed on a daily, week, monthly basis to help prevent and eliminate potential risk of foreign object debris. Documents corresponding with each machine will be collected, scanned and organized on a monthly basis. All duties will be communicated with the department manager. Salary: $20- $24/hr DOE Responsibilities Essential Duties and Responsibilities include the following. Other duties may be assigned. * Administers and inventories the certifications of purchased items. * Back up for review & approve PCD finished job certifications. * Works with crafts to dispose of unwanted chemicals and supplies. * Performs a daily, weekly and monthly cleaning of the certified Cleanroom. * Change chemical tanks periodically throughout the week as per schedule. * Is responsible for keeping quality records organized and easily located on company's servers. Administer and perform: * PCD Preventive Maintenance program. * PCD Calibration program. * Updates of the PCD "uncontrolled" within the quality masters' folders. Skills / Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Common knowledge of basic hand tool use. Microsoft Office Skill are a plus. Lifting of up to 25 lbs. is expected. Mechanical aids are available for weights over 25 lbs. Will be exposed to mild alkaline and acidic based detergents and organic solvents. Company Overview Element is one of the fastest growing testing, inspection and certification businesses in the world. Globally we have more than 9,000 brilliant minds operating from 270 sites across 30 countries. Together we share an ambitious purpose to 'Make tomorrow safer than today'. When failure in use is not an option, we help customers make certain that their products, materials, processes and services are safe, compliant and fit for purpose. From early R&D, through complex regulatory approvals and into production, our global laboratory network of scientists, engineers, and technologists support customers to achieve assurance over product quality, sustainable outcomes, and market access. While we are proud of our global reach, working at Element feels like being part of a smaller company. We empower you to take charge of your career, and reward excellence and integrity with growth and development. Industries across the world depend on our care, attention to detail and the absolute accuracy of our work. The role we have to play in creating a safer world is much bigger than our organization. Diversity Statement At Element, we always take pride in putting our people first. We are an equal opportunity employer that recognizes diversity and inclusion as fundamental to our Vision of becoming "the world's most trusted testing partner". All suitably qualified candidates will receive consideration for employment on the basis of objective work related criteria and without regard for the following: age, disability, ethnic origin, gender, marital status, race, religion, responsibility of dependents, sexual orientation, or gender identity or other characteristics in accordance with the applicable governing laws or other characteristics in accordance with the applicable governing laws. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) "If you need an accommodation filling out an application, or applying to a job, please email "

A Travel Cath Lab Technologist provides technical assistance during cardiac catheterization procedures, ensuring high-quality patient care in interventional cardiology settings. This role involves operating specialized equipment, assisting cardiologists, maintaining patient records, and adhering to healthcare regulations. The position includes benefits such as housing allowance, health insurance, and travel reimbursements through a Joint Commission-certified staffing agency. MedPro Healthcare Allied Staffing is seeking a travel Cath Lab Technologist for a travel job in Bridgeport, Connecticut. Job Description & Requirements Specialty: Cath Lab Technologist Discipline: Allied Health Professional Start Date: Duration: 13 weeks 40 hours per week Shift: 10 hours, days Employment Type: Travel MedPro Healthcare Staffing, a Joint Commission-certified staffing agency, is seeking a quality Cath Lab Technologist for a contract with one of our top healthcare clients. Requirements Current License in good standing Appropriate specialty certifications/credentials Two years of Cath Lab experience preferred, ideally in a critical care setting. Benefits Weekly pay and direct deposit Full coverage of all credentialing fees Private housing or housing allowance Group Health insurance for you and your family Company-paid life and disability insurance Travel reimbursement 401(k) matching Unlimited Referral Bonuses up to $1,000 Duties Responsibilities The primary responsibility of the Cath Lab Tech is to provide assistance with patient care in the cardiac catheterization lab (CCL) through the provision of technical assistance to the cardiac catheterization team. Provides direct, safe, competent and quality patient care in the Interventional Cardiology department. Assists in the performance of various invasive cardiac or peripheral vascular diagnostic and therapeutic procedures. Sustains a high level of patient care by communication with the patients, families, and physicians and co-works to address the physical, general and psychosocial needs of the patient. Functions under the direction and immediate supervision of the cardiologist/radiologist performing the procedure. Assists cardiologist during procedures by operating ancillary equipment, anticipating and obtaining catheters, wires and other necessary inventory and medications as ordered. Assure compliance with federal, state, and local technical and professional regulations and accepted practiced guidelines. Delivers quality, cost-effective patient care in a professional manner. Works effectively to maintain an environment of excellence, which is patient-focused, providing timely, compassionate, quality patient care. Promotes and maintains a safe work environment for both staff and customers, incorporating national patient safety initiatives. Prepare and update patient records accurately and legibly. About Agency MedPro Healthcare Staffing is a Joint Commission certified provider of contract staffing services. Since 1983, we have placed nursing and allied travelers in top healthcare facilities nationwide. Join us today for your very own MedPro Experience. If qualified and interested, please call for immediate consideration. MedPro Staffing is an Equal Opportunity Employer. All applicants will be considered for employment without attention to race, color, religion, national origin, age, sex, disability, marital status or veteran status. Key Words: Cath Lab Technologist, EKG Tech, Electrocardiograph Tech *Weekly payment estimates are intended for informational purposes only and include a gross estimate of hourly wages and reimbursements for meal, incidental, and housing expenses. Your recruiter will confirm your eligibility and provide additional details. MedPro Job ID #a0Fcx000008jDyzEAE. Pay package is based on 10 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Cath Lab Technologist Cath Lab: Cath Lab Technologist. About MedPro Healthcare Allied Staffing At MedPro Healthcare Staffing, we believe no one cares more for caregivers than we do. Our mission is simple: you focus on your patients, and we'll take care of the rest. As a Joint Commission-certified leader in temporary and contract healthcare staffing since 1983, MedPro has proudly connected nursing and allied travelers with top healthcare facilities across the nation. With thousands of job opportunities available nationwide, we make it easy to find assignments that align with your goals and lifestyle. Our on-staff clinical support team-alongside a compassionate group of experienced recruiters-provides hands-on guidance every step of the way. From Day 1 medical benefits and a 401(k) plan to personalized career support, we're committed to ensuring every professional we serve feels valued, cared for, and empowered to succeed. Guided by a CEO who is a Registered Nurse, MedPro is built on a foundation of clinical insight and genuine compassion for the caregiving community. Through The MedPro Experience, we deliver travel assignments that are rewarding, memorable, and designed to help you DREAM big, EXPLORE often, and ACHIEVE greatness. Benefits Day 1 medical, dental, and vision benefits for you and your family Weekly pay and direct deposit Unlimited Referral Bonuses starting at $500 On Staff Clinical Support Team Access to nationwide travel assignments MPX+ Mobile appreal-time access to jobs, credentials, assignment details, and more Full coverage of all credentialing fees Private housing or housing allowance Tax Free Per Diems, Housing Stipends and Travel Reimbursements Company-paid life and disability insurance Travel reimbursement 401(k) matching Benefits Weekly pay Employee assistance programs Referral bonus Keywords: Cath Lab Technologist, Cardiovascular Technologist, Interventional Cardiology, Cardiac Catheterization, Travel Healthcare Jobs, Allied Health Professional, Medical Technician, Patient Care, Healthcare Staffing, Temporary Nursing Jobs

Summary: This position is responsible for planning activities concerned with application and maintenance of quality standards for industrial processes, materials and products. Essential Functions of the Job: The essential functions of this job require the person, with or without reasonable accommodations, to perform the following: * Perform statistical analysis and study to determine if the current processes are meeting the customer specifications. * Perform repeatability and reliability tests on tooling. * Coordinate programs to recognize and reward groups or individuals for suggestions and actions related to process improvement. * Direct workers engaged in measuring and testing product and tabulating data concerning materials, product or process quality and reliability. * Develop and initiate standards and methods for inspection, testing and evaluation. * Compile and write training material and conduct training sessions on quality control activities. * Provide training in the use of measuring equipment and proper procedure for first article inspection. * Monitor own work to ensure quality during testing sequences and calibration procedures for instruments and equipment. * Test and calibrate electrical, mechanical, electromechanical and electronic measuring instruments and equipment for conformance to established standards. Assist in formulating calibration standards. * Demonstrate accuracy and thoroughness when measuring parts for conformity and specifications. * Use advanced math skills when devising formulas to solve problems with measurements and calibrations. * Speak clearly when assisting Engineers in formulating test, calibration, repair and evaluation plans and procedures to maintain precision accuracy of measuring, recording and indicating instruments and equipment. * Lift or move up to 50 pounds when comparing product with parts list or sample model to ensure assembly is complete. * Verify specified dimensions of product or material. * Reject defective parts and mark defect type on part, container of parts and inspection tag. * Use the following software when performing this job: MAC-PAC, Database Management, Microsoft Excel, Word, PowerPoint and Access. * Perform all other duties as assigned. Recommended Education and/or Experience High School Diploma or Equivalent; or minimum six months related experience.

The Senior Quality Control Technician role in our Bloomfield, CT facility drives improvement in the reliability of CO2 Laser products. The incumbent will be engaging directly with a cross functional team on a wide variety of products to ensure our product and processes meet the dynamic laser manufacturing requirements. Working with a quality mindset team, this role will provide hands on support for the incoming goods, in-process, and final inspection of laser systems to ensure we meet Coherent Quality Standards. Primary Duties & Responsibilities Inspection manufactured laser systems: Detail oriented inspection of electronic and mechanical assemblies Utilize common inspection methods to evaluate critical design requirements Develop inspection test plans with a cross functional team Assist in problem solving activities to support identified nonconformities Evaluation and verification of purchased components Define and execute incoming material test plans for qualification activities Document and present inspection results to key stakeholders Verification of vendor supplied documentation including first article inspections and material certifications Support of Quality Systems: Document detailed findings to be used for Continuous Improvement Initiatives Accomplish root cause analysis and provide corrective actions with follow-up Ensure practices align with best practices, procedures and inspection techniques Perform internal product and business system audits Reliability system maintenance: Utilize computers for automated data collection and control of instruments Collaborate with the Quality organization regarding calibration of test instruments Monitor and troubleshoot long term unmanned tests with engineering support Assist in developing new methods and protocols for component level testing and measurement Complete calibration of monitoring and measuring equipment support Education & Experience High School diploma A minimum of 4 years of related experience or combination of education and relevant experience Proficient in the use of automated and manual measuring devices and test equipment Excellent verbal and written skills in the English language required Skills Preferred experience with layout inspections and sound Geometric Dimensioning and Tolerancing knowledge Preferred experience automating inspection test method is preferred Knowledge of centralizing data for analysis Experience of test and measurement of electronic and/or optical systems Continuous improvement mindset - improves products and processes Well organized and knowledgeable of 6S methodology Demonstrated problem-solving abilities combined with hands-on experience Knowledge of electronic component manufacturing Self-motivated to thoroughly document data and test results Working Conditions Manufacturing working environment. Some areas under cleanroom protocol. Minimal to no expected travel Support of seconds shift operations required This is an on-site position in our Bloomfield, CT facility. Shift will be Monday to Friday 11am to 7:30pm Physical Requirements Must be able to move around manufacturing floor Must be able to lift a maximum of 30 pounds Safety Requirements All employees are required to follow the site EHS procedures and Coherent Corp. Corporate EHS standards. Quality and Environmental Responsibilities Depending on location, this position may be responsible for the execution and maintenance of the ISO 9000, 9001, 14001 and/or other applicable standards that may apply to the relevant roles and responsibilities within the Quality Management System and Environmental Management System. Culture Commitment Ensure adherence to company's values (ICARE) in all aspects of your position at Coherent Corp.: Integrity - Create an Environment of Trust Collaboration - Innovate Through the Sharing of Ideas Accountability - Own the Process and the Outcome Respect - Recognize the Value in Everyone Enthusiasm - Find a Sense of Purpose in Work Coherent Corp. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you need assistance or an accommodation due to a disability, you may contact us at ****************************** .

Position Type: Full Time, 40h/week FLSA Classification: Non-Exempt : Roto Frank of America, Inc. is looking for a Maintenance & Quality Technician-2nd Shift to join our team in Chester, CT. Roto North America is a subsidiary of Roto Window and Door Technology, a global leader in window and door hardware, with 18 production plants and more than 30 subsidiaries worldwide. Through its 2 companies, Roto Frank of America, Inc. and Roto Fasco Canada, Inc., Roto North America has been manufacturing and offering a variety of leading North American and European window and door hardware products in the USA and Canada. To learn more about Roto Frank of America please visit us at: Welcome - Roto North America Summary: We are looking for an enthusiastic and passionate individual to join our 2nd shift maintenance and QC team in Chester, CT. The Maintenance and Quality Control Technician will be accountable for the general maintenance and repairs for assigned equipment and be responsible for the quality of produced parts. This position is full time, on site in Chester, CT 3:30pm through 12:00am. There may be occasional overtime as required by business needs. Essential Functions: All aspects of maintenance of the assembly lines and quality control. Inspects and identifies equipment or machines in need of repair. Perform advanced troubleshooting to determine necessary repairs. Order supplies and materials needed for repairs and maintenance. Perform PM (preventative maintenance) on all assembly equipment. Basic milling and lathe work. Ability to use hand tools and power tools. Basic tool repair (grinding, polishing, etc.). Knowledge of general carpentry and repair. Use a pallet jack/forklift. Read and understand engineering drawings (dimensioning and tolerancing). Perform tests according to company quality standards; report results to supervisor for analysis and action steps. Consult with supervisor to determine appropriate recommendations and remedies for questionable products. Perform critical dimension checks on incoming products and raw materials. Use calipers, metric tape, and other measuring devices to determine fine color distinctions. Perform visual quality inspection of incoming finished products. Perform first-piece inspections and checks as noted on production sheets. Create NMRs and control rejected material. Provide support to receiving by identifying material as needed. Computer data entry using SAP system. General housekeeping. Observe all safety requirements. Must wear safety equipment as required. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Required Skills & Competencies: Demonstrated ability to offer sound and relevant input, and to contribute and defend ideas during meetings and discussions. Excellent organizational & time management skills. Assumes responsibility without supervision, self-motivated, and proactive. Ability to follow instructions from supervisors Quality focus along with first piece/last piece expertise Work Environment: Production environment work and physical position. Work requires sitting, standing, and/or walking for long periods, moving and examining objects at high and low reach. Must be physically able to climb ladders, bend or crawl into awkward spaces. Able to drive forklift. Dexterity and accuracy needed to operate testing equipment or gauges. Hand-eye coordination. Must be able to lift up to 50 pounds at a time. Minimum Required Education: High School diploma or equivalent required On-the-job training offered Valid Driver License Required Required Work Experience: Related experience of 2 years preferred Roto offers an attractive salary and benefits package: 401(k) 401(k) matching Employee assistance program Employee discount program Medical insurance Dental insurance Vision insurance Flexible spending account Health savings account Life insurance Short Term Disability insurance Voluntary Long Term Disability insurance Paid time off Paid Holidays Pay Range: The Pay Range for this position is $27.00 - 29.00 hourly. The actual pay range will depend on varying circumstances and individualized factors, such as job-related knowledge, skills, experience, and other objective business considerations. The pay range listed here has been provided to comply with local regulations and represents a potential pay range for this role.

As a Receiving Technician, you will be responsible for validating the quality of purchased raw materials and incoming products by conducting receiving inspections. Quality plays a critical role in elevating the performance of the total company by identifying opportunities for improvement in both processes and people and then working closely with leaders and teammates across the organization to take action to make things better each day (systems, processes, people). Document all inspection results consistent with company procedures and customer requirements and issue non-conformances and/or quality notifications for discrepant conditions as required. Maintain accurate records of incoming inspections in accordance with quality control procedures. Collaborate with engineering, purchasing, and quality departments to address and resolve quality issues with incoming goods. Notify relevant teams about non-conforming materials and incoming product. Follow the tag system Fill out, stamp, and sign Quality Inspections Log and file quality records Inspect and verify the quality and quantity of received materials, parts, or products against purchase orders and specifications. Conduct dimensional and visual inspections using tools like calipers, micrometers, gauges, and other measuring equipment. Support all manufacturing concerns in a timely manner Preferred Experience: Familiarity with office and warehouse environments Basic knowledge of Aerospace specifications Material handling experience, using a Forklift and Overhead Crane Must possess the ability to use and operate the following equipment and tools: Coil Cart, Micrometer, Calipers, Scale, Bander, Bander Cutters, Side Loader 1-2 year quality-related experience and/or training is preferred BENEFITS: Competitive Premiums on Health and Dental Insurances Vision Insurance for team members Boot and prescription safety glasses allowance PTO after 30-days Paid Holidays Quarterly Bonus Program 401k Match

About UFP MedTech: UFP Technologies is a designer and custom manufacturer of comprehensive solutions for medical devices, sterile packaging, and other highly engineered custom products. UFP is an important link in the medical device supply chain and a valued outsource partner to most of the top medical device manufacturers in the world. The Company's single-use and single-patient devices and components are used in a wide range of medical devices and packaging for minimally invasive surgery, infection prevention, wound care, wearables, orthopedic soft goods, and orthopedic implants. UFP Technologies, Inc. offers a competitive benefits package, including but not limited to: * Medical, Dental, Vision, Life, Disability Insurance * 401K with a matching contribution * Paid time off, Paid holidays, Employee discounts and much more! Location: This position will be on-site full-time in Chicopee, MA. The position holder will need to be within commuting distance (within 45 min). Quality Technician Summary: The Quality Technician performs diversified duties to monitor and ensure the proper quality testing of company products. This role provides support related to corrective action containment, component measurement / testing, product certification and administrative tasks. Quality Technician Essential Duties and Responsibilities: * Audits quality testing and documentation completed by operators, and reviews quality testing results to ensure proper testing has been conducted, results properly recorded and that results are within specification and without documentation errors. * Reads, reviews and interprets statistical run charts to detect trends in product quality line fall-off and report to appropriate personnel. * Ensures all ISO or other quality standards and procedures are being followed. * Authorizes release of finished goods based on quality audits. * Participates in Root Cause Investigations and provides corrective actions to customer SCARs. * Conducts any required special testing, failure analysis, etc. * Provides instruction, guidance and direction for manufacturing employees in determining acceptable products. * Performs regularly scheduled calibration of measuring and test equipment and arrange external calibration services. * Performs all other duties as assigned or needed. Quality Technician Qualification Requirements: * High school diploma, and 2+ years of related work experience. * Experience with Quality Standards - ISO 9001 and / or ISO 13485. * Bi-lingual in Spanish strongly desired. * Able to read and understand blueprints and other specifications. * Able to use micrometers, calipers, video measuring equipment and other common inspection tools. * Basic knowledge interpreting SPC control charting. * Ability to interact with different levels of the organization. * Strong oral communication and interpersonal skills. * Experience with Microsoft Office applications. UFP Technologies, Inc. is an Equal Opportunity/Affirmative Action employer Minorities/Women/Veterans/Disabled. #UFP #MEDTECH #CHIC

Linde Advanced Material Technologies Inc. Quality Technician - Inspector Manchester, CT, United States | req26453 1st shift, Monday-Friday 07:00am - 03:30pm What you will enjoy doing* * You will perform inspections, as well as in-process and final inspection of parts and assemblies in accordance with applicable engineering standards * In this role you will inspect parts using precision measurement equipment/devices * You will assist engineering and operations in the investigation of non-conformities * In this role you will also play a part in contract review of customer orders ensuring adherence to all applicable specifications * You are responsible for ensuring proper documentation including fine print details on all product certifications What makes you great * High Diploma or GED is required for this role * The ideal candidate will have 3 - 5 years of aviation experience and 2 years of inspection experience applying GD&T Principles and practices * Knowledge of ISO9001 & AS9100 Quality Management systems; working knowledge of First Article Inspection requirements per AS9102 * Proficient in Microsoft Office Suite * You have knowledge of common inspection measuring equipment is also a plus Why you will love working with us Linde Advanced Material Technologies, formerly Praxair Surface Technologies, is a company that revolutionizes industries through innovative materials and surface coatings. We are leaders in advanced materials and offer metal powders, sputtering targets, and surface coatings that enhance performance across various sectors. Our strong focus on innovation is evident in our superior technologies for the aerospace, energy, semiconductor, automotive, and industrial industries. Linde employees learn and abide the Linde Code of Ethics and Code of Conduct by demonstrating honesty, integrity, professionalism in all communications, actions, and decisions. What we offer you! At Linde, the sky is not the limit. If you're looking to build a career where your work reaches beyond your job description and betters the people with whom you work, the communities we serve, and the world in which we all live, at Linde, your opportunities are limitless. Be Linde. Be Limitless. Linde offers competitive compensation and an outstanding benefits package. Enjoy access to health, dental, disability, and life insurance, paid holidays and vacation, 401(k) matching, pension benefits, an employee discount program, and opportunities for educational and professional growth. Additional compensation may vary depending on the position and organizational level. Build your future with us while making an impact every day! Have we inspired you? Let´s talk about it We are looking forward to receiving your complete application. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, pregnancy, sexual orientation, gender identity or expression, or any other reason prohibited by applicable law. Linde Advanced Material Technologies Inc. abides by applicable export control laws including the Export Administration Regulations (EAR) and the International Traffic in Arms Regulations (ITAR) in accordance with the company's export control procedures. As such, persons considered for this position must be either a U.S. Citizen, Permanent Resident (green card holder) or otherwise classifiable as a U.S. person under relevant regulations. Linde Advanced Material Technologies Inc. acts responsibly towards its shareholders, business partners, employees, society and the environment in every one of its business areas, regions and locations across the globe. The company is committed to technologies and products that unite the goals of customer value and sustainable development. * The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of employees assigned to this position. Therefore employees assigned may be required to perform additional job tasks required by the manager. #LI-JD1

Job Description Required Qualifications: High School Diploma or equivalent - Required Quality Inspection Experience (2 to 4 years) Strongly Preferred High attention to detail and consistency Experience with basic measuring equipment such as calipers or micrometers and other common inspection tools Experience reading and interpreting blueprints and specifications Experience in a smaller production environment Some experience with Visual Measuring Systems desired Responsibilities: Scope: Our Quality Inspectors compare measurements, form, fit, function, and value judgments of simple and complex parts to blueprint specifications and general workmanship standards using documents, experience, and knowledge of inspection techniques of Saint-Gobain/American Seal & Engineering Co. The Quality Inspector is responsible for ensuring Good Documentation Practices are utilized throughout all quality records that are reviewed/completed/inspected/audited. Essential Functions: Inspect manufactured product for dimensional consistency, workmanship and finish. Maintains the flow of product through inspection in a timely manner meeting due dates for outside processes and customer deliveries. Inspects incoming materials for conformance to requirements, reviews certifications for conformance, issues DMR or NCMR in our ERP system if needed. Performs In-process inspection. Reviews certification packages for product and releases for shipment in ERP system. Files electronic data on server and maintains accurate and orderly certification files in QA. Assists the lead Inspector and department manager as needed. Other tasks as assigned. Comments/Special Instructions: Ideal candidate will have previous experience in a fast-paced manufacturing environment.

Element has an opportunity for a Cleanroom Quality Technician. The Cleanroom Quality Technician is responsible to ensure that all company and customer technical and regulatory requirements are followed within the Precision Cleaning Division. This person will be responsible to ensure processing tanks are cleaned, filtered and meet specification requirements by performing weekly titrations. Cleaning of the cleanroom will be performed on a daily, week, monthly basis to help prevent and eliminate potential risk of foreign object debris. Documents corresponding with each machine will be collected, scanned and organized on a monthly basis. All duties will be communicated with the department manager. Salary: $20- $24/hr DOE Responsibilities Essential Duties and Responsibilities include the following. Other duties may be assigned. • Administers and inventories the certifications of purchased items. • Back up for review & approve PCD finished job certifications. • Works with crafts to dispose of unwanted chemicals and supplies. • Performs a daily, weekly and monthly cleaning of the certified Cleanroom. • Change chemical tanks periodically throughout the week as per schedule. • Is responsible for keeping quality records organized and easily located on company's servers. Administer and perform: • PCD Preventive Maintenance program. • PCD Calibration program. • Updates of the PCD “uncontrolled” within the quality masters' folders. Skills / Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Common knowledge of basic hand tool use. Microsoft Office Skill are a plus. Lifting of up to 25 lbs. is expected. Mechanical aids are available for weights over 25 lbs. Will be exposed to mild alkaline and acidic based detergents and organic solvents. Company Overview Element is one of the fastest growing testing, inspection and certification businesses in the world. Globally we have more than 9,000 brilliant minds operating from 270 sites across 30 countries. Together we share an ambitious purpose to ‘Make tomorrow safer than today'. When failure in use is not an option, we help customers make certain that their products, materials, processes and services are safe, compliant and fit for purpose. From early R&D, through complex regulatory approvals and into production, our global laboratory network of scientists, engineers, and technologists support customers to achieve assurance over product quality, sustainable outcomes, and market access. While we are proud of our global reach, working at Element feels like being part of a smaller company. We empower you to take charge of your career, and reward excellence and integrity with growth and development. Industries across the world depend on our care, attention to detail and the absolute accuracy of our work. The role we have to play in creating a safer world is much bigger than our organization. Diversity Statement At Element, we always take pride in putting our people first. We are an equal opportunity employer that recognizes diversity and inclusion as fundamental to our Vision of becoming “the world's most trusted testing partner”. All suitably qualified candidates will receive consideration for employment on the basis of objective work related criteria and without regard for the following: age, disability, ethnic origin, gender, marital status, race, religion, responsibility of dependents, sexual orientation, or gender identity or other characteristics in accordance with the applicable governing laws or other characteristics in accordance with the applicable governing laws. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) “If you need an accommodation filling out an application, or applying to a job, please email ***********************”

Job Title: Quality Technician III Salary: $ Depending on experience Hours: 7:00 AM - 3:30 PM Duration: Direct Hire and Special DutiesThis position requires a minimum of 7 years of advanced inspection experience, including detailed layouts, setups, and visual inspections. Responsibilities include performing inspections for receiving, first article, first piece, in-process, final, and non-routine inspection activities on components (e.g., parts, sub-assemblies, finished goods, tooling, gages, fixtures, etc.). Additional duties may be assigned as required.Compensation & Benefits Competitive pay Medical, dental, and vision insurance Paid vacation Excusable allowance hours 401(k) retirement plan Education & Experience Requirements High school diploma or technical school equivalent with emphasis in mathematics ASQ CQT certification preferred Calibration experience preferred Experience inspecting high-precision, tight-tolerance parts in industries such as: Aerospace (ISO 9001/AS9100) Automotive (IATF 16949) Medical Device (ISO 13485) Military/Government Familiarity with both low- and high-volume production environments Compliance & Citizenship Requirements Must be a U.S. Citizen or U.S. Permanent Resident Green Card holder (ITAR compliance required) Skills & ResponsibilitiesCandidates must demonstrate proficiency in the following areas: Blueprint reading and GD&T interpretation (e.g., true position, profile of a line/surface) Interpretation of customer blueprints, material specs, and MIL-SPECs Understanding of the PPAP process Programming and operation of Vision Systems and CMMs (Starrett preferred) Proficient use of inspection tools including: Micrometers, calipers, indicators, comparators, gage pins Hardness testers, concentricity gages Surface plate setups using height gages, sine plates, v-blocks, etc. Development of inspection instructions and method setup sheets Maintenance of quality records and documentation Mentoring of Level I and II Inspectors Anticipating inspection needs, taking initiative, and escalating issues appropriately Communicating inspection deviations and generating nonconformance reports Supporting lean initiatives and continuous improvement efforts Maintaining safety, environmental, housekeeping, and documentation standards Company OverviewFounded in 2010, Top Prospect Group focuses on matching high-quality candidates with top clients while fostering an environment where success is shared by all. In 2023, the company was acquired by HW Staffing Solutions, expanding its service offerings to include technology and professional services. Qualified candidates are encouraged to apply immediately! Please include a clean copy of your resume, salary expectations, and any references in your application. #INDTPGSHELTON

As a Lab Technician, you will be responsible for completing and maintaining all necessary training and documentation of production records in accordance with quality system standards. You will work under the direction of supervisors and managers, utilizing documented techniques and methods to proficiently conduct various laboratory tasks. Responsibilities Receive and inspect soiled products. Communicate with various departments and staff as needed. Conduct lumen clearing on at least three specific products, averaging the completion of 50 devices per day. Perform tasks under the direction of the Manager, including lot number assignment, initial decontamination soak, coating removal, secondary decontamination, and ViewFlex Ultra Wet Room activities. Maintain a clean, organized workspace and conduct line clearance as needed. Perform top-down cleaning as directed. Follow the company's safety and quality guidelines. Complete additional responsibilities, projects, tasks, or objectives as assigned by supervisors, managers, engineers, directors, or company executives. Essential Skills Quality control Laboratory skills GMP knowledge Medical laboratory expertise Inspection and diagnosis skills Manufacturing process knowledge Experience with medical devices Additional Skills & Qualifications High school diploma, GED, or equivalent 1 year of experience in medical device reprocessing, manufacturing, production, or a related work environment Positive attitude and team-oriented mindset Ability to lift objects up to 40 lbs. and transfer them manually Ability to work on feet or sit for extended periods Basic knowledge of OSHA safety rules and precautionary measures Work Environment This position is based in a manufacturing lab. The work involves physical activity, including lifting objects up to 40 lbs. and either standing or sitting for extended periods. The lab environment follows strict safety and quality guidelines to ensure a clean and organized workspace. Job Type & Location This is a Permanent position based out of Voluntown, CT. Pay and Benefits The pay range for this position is $15.00 - $19.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Voluntown,CT. Application Deadline This position is anticipated to close on Jan 29, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

ID 2026-18255 Element has an opportunity for a Cleanroom Lab Technician to perform the basic elements required on a traveler such as visual inspection at incoming, count verification, equipment setup, part drying and packaging with low to moderate supervision. More complex tasks such as equipment operation and cleanliness verification shall be performed with the assistance and guidance of a qualified Cleaning Operator or Technician. Salary: $20- $24/hr DOE Responsibilities Essential Duties and Responsibilities include the following. Other duties may be assigned. * Perform incoming inspection of customer hardware, including: verifying counts, part numbers, and general condition of goods and record on appropriate forms. * Prepare customer hardware prior to cleanliness testing by performing a wide variety of operations such as, but not limited to: degreasing, ultrasonic cleaning, and manual cleaning. * Prepare cleaning and testing supplies including but not limited to: weighing of filters, preparation of and filtering of cleaning, testing, and preservation fluids. * Under supervision of Cleaning Operator or Technician, be able to set up and perform cleaning operations and basic test methods. * Performs variety of general tasks such as packaging of parts and labeling of bags. * Ensure that work area, customer hardware, tools, equipment, and supplies are organized and clean. Skills / Qualifications Qualifications: This associate shall be in the process of receiving "Classroom" training in accordance with procedure 4.18.1.4 and at the same time receiving "hands on" training under surveillance of Cleaning Operators or Technician. Education/Experience: None necessary; training provided. Language Ability: Must be able to read, write, speak, and understand the English language. Math Ability: Must be able to perform basic mathematics; i.e. add, subtract, multiply and divide, using whole numbers, common fractions Company Overview Element is one of the fastest growing testing, inspection and certification businesses in the world. Globally we have more than 9,000 brilliant minds operating from 270 sites across 30 countries. Together we share an ambitious purpose to 'Make tomorrow safer than today'. When failure in use is not an option, we help customers make certain that their products, materials, processes and services are safe, compliant and fit for purpose. From early R&D, through complex regulatory approvals and into production, our global laboratory network of scientists, engineers, and technologists support customers to achieve assurance over product quality, sustainable outcomes, and market access. While we are proud of our global reach, working at Element feels like being part of a smaller company. We empower you to take charge of your career, and reward excellence and integrity with growth and development. Industries across the world depend on our care, attention to detail and the absolute accuracy of our work. The role we have to play in creating a safer world is much bigger than our organization. Diversity Statement At Element, we always take pride in putting our people first. We are an equal opportunity employer that recognizes diversity and inclusion as fundamental to our Vision of becoming "the world's most trusted testing partner". All suitably qualified candidates will receive consideration for employment on the basis of objective work related criteria and without regard for the following: age, disability, ethnic origin, gender, marital status, race, religion, responsibility of dependents, sexual orientation, or gender identity or other characteristics in accordance with the applicable governing laws or other characteristics in accordance with the applicable governing laws. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) "If you need an accommodation filling out an application, or applying to a job, please email "

Job Description Summary: This position is responsible for planning activities concerned with application and maintenance of quality standards for industrial processes, materials and products. Essential Functions of the Job: The essential functions of this job require the person, with or without reasonable accommodations, to perform the following: Perform statistical analysis and study to determine if the current processes are meeting the customer specifications. Perform repeatability and reliability tests on tooling. Coordinate programs to recognize and reward groups or individuals for suggestions and actions related to process improvement. Direct workers engaged in measuring and testing product and tabulating data concerning materials, product or process quality and reliability. Develop and initiate standards and methods for inspection, testing and evaluation. Compile and write training material and conduct training sessions on quality control activities. Provide training in the use of measuring equipment and proper procedure for first article inspection. Monitor own work to ensure quality during testing sequences and calibration procedures for instruments and equipment. Test and calibrate electrical, mechanical, electromechanical and electronic measuring instruments and equipment for conformance to established standards. Assist in formulating calibration standards. Demonstrate accuracy and thoroughness when measuring parts for conformity and specifications. Use advanced math skills when devising formulas to solve problems with measurements and calibrations. Speak clearly when assisting Engineers in formulating test, calibration, repair and evaluation plans and procedures to maintain precision accuracy of measuring, recording and indicating instruments and equipment. Lift or move up to 50 pounds when comparing product with parts list or sample model to ensure assembly is complete. Verify specified dimensions of product or material. Reject defective parts and mark defect type on part, container of parts and inspection tag. Use the following software when performing this job: MAC-PAC, Database Management, Microsoft Excel, Word, PowerPoint and Access. Perform all other duties as assigned. Recommended Education and/or Experience High School Diploma or Equivalent; or minimum six months related experience.

Position Type: Full Time, 40h/week FLSA Classification: Non-Exempt : Roto Frank of America, Inc. is looking for a Maintenance & Quality Technician-2nd Shift to join our team in Chester, CT. Roto North America is a subsidiary of Roto Window and Door Technology, a global leader in window and door hardware, with 18 production plants and more than 30 subsidiaries worldwide. Through its 2 companies, Roto Frank of America, Inc. and Roto Fasco Canada, Inc., Roto North America has been manufacturing and offering a variety of leading North American and European window and door hardware products in the USA and Canada. To learn more about Roto Frank of America please visit us at: Welcome - Roto North America Summary: We are looking for an enthusiastic and passionate individual to join our 2nd shift maintenance and QC team in Chester, CT. The Maintenance and Quality Control Technician will be accountable for the general maintenance and repairs for assigned equipment and be responsible for the quality of produced parts. This position is full time, on site in Chester, CT 3:30pm through 12:00am. There may be occasional overtime as required by business needs. Essential Functions: All aspects of maintenance of the assembly lines and quality control. Inspects and identifies equipment or machines in need of repair. Perform advanced troubleshooting to determine necessary repairs. Order supplies and materials needed for repairs and maintenance. Perform PM (preventative maintenance) on all assembly equipment. Basic milling and lathe work. Ability to use hand tools and power tools. Basic tool repair (grinding, polishing, etc.). Knowledge of general carpentry and repair. Use a pallet jack/forklift. Read and understand engineering drawings (dimensioning and tolerancing). Perform tests according to company quality standards; report results to supervisor for analysis and action steps. Consult with supervisor to determine appropriate recommendations and remedies for questionable products. Perform critical dimension checks on incoming products and raw materials. Use calipers, metric tape, and other measuring devices to determine fine color distinctions. Perform visual quality inspection of incoming finished products. Perform first-piece inspections and checks as noted on production sheets. Create NMRs and control rejected material. Provide support to receiving by identifying material as needed. Computer data entry using SAP system. General housekeeping. Observe all safety requirements. Must wear safety equipment as required. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Required Skills & Competencies: Demonstrated ability to offer sound and relevant input, and to contribute and defend ideas during meetings and discussions. Excellent organizational & time management skills. Assumes responsibility without supervision, self-motivated, and proactive. Ability to follow instructions from supervisors Quality focus along with first piece/last piece expertise Work Environment: Production environment work and physical position. Work requires sitting, standing, and/or walking for long periods, moving and examining objects at high and low reach. Must be physically able to climb ladders, bend or crawl into awkward spaces. Able to drive forklift. Dexterity and accuracy needed to operate testing equipment or gauges. Hand-eye coordination. Must be able to lift up to 50 pounds at a time. Minimum Required Education: High School diploma or equivalent required On-the-job training offered Valid Driver License Required Required Work Experience: Related experience of 2 years preferred Roto offers an attractive salary and benefits package: 401(k) 401(k) matching Employee assistance program Employee discount program Medical insurance Dental insurance Vision insurance Flexible spending account Health savings account Life insurance Short Term Disability insurance Voluntary Long Term Disability insurance Paid time off Paid Holidays Pay Range: The Pay Range for this position is $27.00 - 29.00 hourly. The actual pay range will depend on varying circumstances and individualized factors, such as job-related knowledge, skills, experience, and other objective business considerations. The pay range listed here has been provided to comply with local regulations and represents a potential pay range for this role.

Job DescriptionAbout UFP MedTech: UFP Technologies is a designer and custom manufacturer of comprehensive solutions for medical devices, sterile packaging, and other highly engineered custom products. UFP is an important link in the medical device supply chain and a valued outsource partner to most of the top medical device manufacturers in the world. The Company's single-use and single-patient devices and components are used in a wide range of medical devices and packaging for minimally invasive surgery, infection prevention, wound care, wearables, orthopedic soft goods, and orthopedic implants. UFP Technologies, Inc. offers a competitive benefits package, including but not limited to: Medical, Dental, Vision, Life, Disability Insurance 401K with a matching contribution Paid time off, Paid holidays, Employee discounts and much more! Location: This position will be on-site full-time in Chicopee, MA. The position holder will need to be within commuting distance (within 45 min). Quality Technician Summary: The Quality Technician performs diversified duties to monitor and ensure the proper quality testing of company products. This role provides support related to corrective action containment, component measurement / testing, product certification and administrative tasks. Quality Technician Essential Duties and Responsibilities: Audits quality testing and documentation completed by operators, and reviews quality testing results to ensure proper testing has been conducted, results properly recorded and that results are within specification and without documentation errors. Reads, reviews and interprets statistical run charts to detect trends in product quality line fall-off and report to appropriate personnel. Ensures all ISO or other quality standards and procedures are being followed. Authorizes release of finished goods based on quality audits. Participates in Root Cause Investigations and provides corrective actions to customer SCARs. Conducts any required special testing, failure analysis, etc. Provides instruction, guidance and direction for manufacturing employees in determining acceptable products. Performs regularly scheduled calibration of measuring and test equipment and arrange external calibration services. Performs all other duties as assigned or needed. Quality Technician Qualification Requirements: High school diploma, and 2+ years of related work experience. Experience with Quality Standards - ISO 9001 and / or ISO 13485. Bi-lingual in Spanish strongly desired. Able to read and understand blueprints and other specifications. Able to use micrometers, calipers, video measuring equipment and other common inspection tools. Basic knowledge interpreting SPC control charting. Ability to interact with different levels of the organization. Strong oral communication and interpersonal skills. Experience with Microsoft Office applications. UFP Technologies, Inc. is an Equal Opportunity/Affirmative Action employer Minorities/Women/Veterans/Disabled. #UFP #MEDTECH #CHIC