Quality assurance technician jobs in Nebraska

Job Description This position is responsible for conducting food safety and quality assurance audits of the production lines and facility assuring the company standards are maintained and product integrity is preserved. This position is required to promptly notify Quality and Operations management team when food safety critical limits and product quality parameters do not meet company program requirements. This position works with the cross-functional management team to resolve quality, production and efficiency problems. Duties and Responsibilities Abide by all regulations, policies, codes, work procedures, and instructions. Follow all safety rules and Good Manufacturing Practices (GMP) and use all appropriate safety equipment. Monitor and/or verify products for compliance to specifications (weight, packaging, ingredients, etc.) Perform and record monitoring and/or verification checks of Critical Control Point (CCP), Preventive Control (PC). Perform inspections for proper cleaning of equipment at pre-operation and/or during operations. Place product, equipment and/or an area on QA Hold when required as a result of identified non-conformances. Respond to additional calls when needed concerning foreign materials, non-conformance, receiving and or shipping. Monitor production, maintenance, and sanitation employees for compliance with GMP's Inspect trailer condition and unloading raw material truck and loading of finished good products. Pull samples of finished product for shelf life and sensory testing/evaluation. Perform daily sensory evaluations which include tasting the product, checking the color of the top and bottom crust, evaluating the workmanship of the icing pattern, topping and fillings for customer and product expectations. Analyze facts or circumstances surrounding individual problems to determine what action should be taken within the limits of standard practices. Perform weekly and daily equipment calibrations Collect samples for lab analysis as directed by food safety and quality control policy. GMP Audits - Monitor production, maintenance, and sanitation employees for compliance with GMP. Glass/Brittle Plastic Audits - Follow up on foreign material and breakage form and sign off. Complies with all food safety policies, procedures and programs as stated in the Company's Food Safety Manual. Perform all other duties as assigned and required. Required Knowledge, Skills & Abilities Knowledge of inspection and quality control methods in manufacturing environment, preferably in food manufacturing. Knowledge and use of a wide variety of measuring instruments. Must be able to work efficiently in a fast paced, continuously changing environment. Effective communication with other departments and outside contacts is essential. Strong positive attitude, work ethic, and commitment to department and company goals Excellent written and verbal communication skills Ability to learn quickly and work efficiently Must be a team player Highly organized with keen attention to detail Strong computer skills Education & Experience 1 - 3 years Quality Assurance or related experience, preferably in the food manufacturing High school diploma or GED is required Physical Requirements The physical demands described below are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. 3:00am - 11:30am

Syngenta Seeds is one of the world's largest developers and producers of seed for farmers, commercial growers, retailers and small seed companies. Syngenta seeds improve the quality and yields of crops. High-quality seeds ensure better and more productive crops, which is why farmers invest in them. Advanced seeds help mitigate risks such as disease and drought and allow farmers to grow food using less land, less water and fewer inputs. Syngenta Seeds brings farmers more vigorous, stronger, resistant plants, including innovative hybrid varieties and biotech crops that can thrive even in challenging growing conditions. Syngenta Seeds is headquartered in the United States. Job Description Responsible for general site upkeep, such as, general maintenance, housekeeping, stocking, etc. Operate forklifts to support plant operations. Assisting with operating equipment and systems in accordance with site specific activities. Support quality control and adherence. Basic understanding of standard procedures and safety programs. Alert senior technicians and leadership as needed when non-conformities in product or process variance occur. Maintain compliance with site HSE protocols and Syngenta HSE policies and employee code of conduct. Qualifications High School Diploma or GED. 3+ years of relevant experience. Ability to work multiple shifts. Forklift certification (within 90 days). Able to perform manual labor tasks, such as bending, lifting, and standing for extended periods. Ability to lift, push, pull up to 70 pounds. Critical Success Factors & Key Challenges: Knowledge of safety procedures and maintaining a safe work environment. Limited knowledge of routine maintenance procedures. Accurate record-keeping of production documents. Basic knowledge of Microsoft Office. Ability to conduct inspections to ensure product quality. Ability to communicate effectively and work as part of a team. Additional Information What We Offer: A culture that celebrates diversity & inclusion, promotes professional development, and strives for a work-life balance that supports the team members. Offers flexible work options to support your work and personal needs. Full Benefit Package (Medical, Dental & Vision) that starts your first day. 401k plan with company match, Profit Sharing & Retirement Savings Contribution. Paid Vacation, Paid Holidays, Maternity and Paternity Leave, Education Assistance, Wellness Programs, Corporate Discounts, among other benefits. Syngenta has been ranked as a top employer by Science Journal. Learn more about our team and our mission here: ******************************************* Syngenta is an Equal Opportunity Employer and does not discriminate in recruitment, hiring, training, promotion or any other employment practices for reasons of race, color, religion, gender, national origin, age, sexual orientation, marital or veteran status, disability, or any other legally protected status. WL1A #LI-KR1 #LI-ONSITE

Valero is the best-in-class producer of essential fuels and products that are foundational to modern life. We invite you to join our ~10,000 employees to drive exceptional results for our company, the energy industry and our community. As a QA/QC Lab Technician you will implement the quality assurance (QA/QC) program for the ethanol plant to ensure maximum production quantity and quality, while supporting the policies, goals, and objectives of the company. At Valero, we are committed to advancing the future of energy through innovation, ingenuity and unmatched execution. You can help achieve this goal if you can: * Assist in implementing plant QA/QC program. * Implement plant QA/QC program based on best practice in the ethanol industry by sampling various points in the process and conducting QA/QC tests. * Ensure accuracy of analysis of samples and provide results in a timely manner. * Monitor use and inventory of laboratory chemicals and supplies. * Operate, maintain, and calibrate laboratory equipment. * Review reports, analyze data and make recommendations for adjusting process conditions to ensure that QA/QC standards are met. * Maintain safety, health and environmental policies and procedures. * Ensure city, county, state, and federal regulations relating to the QA/QC laboratory are met at all times. * Participate in the safety program for the QA/QC laboratory. * Maintain a clean and orderly work environment. * Demonstrate teamwork and take initiative in daily work. * Assist coordinating activities with other departments. * Communicate directly with production department to ensure effective participation by the process operators in the implementation of QA/QC policies and procedures. * Implement programs and procedures required to ensure laboratory and plant cleanliness. * Demonstrate a thorough understanding of the ethanol process. This position is hourly nonexempt status, which means you are eligible for overtime pay. This is a part-time position. Minimum Requirements: * High school diploma or GED required. * Minimum one year of experience in a laboratory setting or an Associate's degree (or higher) in a related scientific or technical field required. * Able and willing to work on-site and in-person, required. Preferred Requirements: * Bachelor's (or higher level) degree in a related scientific or technical field preferred. * Experience with implementing effective QA/QC programs preferred. * Experience operating and troubleshooting automated laboratory equipment (such as HPLC or GC) preferred. * Experience with software programs such as Office, LIMS, Pi or SAP preferred. * Experience with Food Safety Modernization Act (FSMA) preferred. Need more reasons to work for a company that is both professionally challenging and culturally rewarding? Take a look at some of our best-in-class benefits: * Competitive Pay and Annual Bonus Program * 100% match on 401(K) up to 7%, plus additional discretionary 3% annual company contribution * Comprehensive Healthcare and Wellness Programs Benefits described above are highlights only, subject to an employee's eligibility and work location. Discover more about Albion and how we're making a difference there. Valero's pre-employment process includes successful completion of a background check and pre-employment drug screen. Valero's employees and team-focused culture drive our success. We're invested in our dedicated workforce through a comprehensive, customizable benefits package, while supporting a caring culture that delivers a rewarding work environment built on teamwork, excellence and career growth. To explore the ways we build a stronger team, visit Valero.com/Careers. Valero is an EEO Employer. All qualified applicants are encouraged to apply and will receive consideration for employment without regard to legally protected status, including race, color, religion, sex, national origin, age, disability, protected veteran or any other status protected by applicable federal, state or local laws. Please be advised, if you are viewing this position on a website that lists an estimated salary rate/range, it was not provided by Valero. Valero's market specific salary rate/range will be provided during the recruiting process and tends to be higher than what is estimated by such websites. * LI-LP1

The Quality Assurance Technician will be responsible for conducting food safety and quality assurance audits on production lines, ensuring that the company's standards are consistently met. **Responsibilities** + Conduct food safety and quality assurance audits on production lines. + Ensure compliance with company standards and FDA regulations. + Perform inspection and batch record reviews. + Maintain and follow standard operating procedures (SOPs). **Essential Skills** + 1-3 years of quality assurance experience in a manufacturing environment. + Proficiency in quality assurance and quality control processes. + Familiarity with FDA regulations. + Ability to stand for 8-12 hours. + GED required. **Additional Skills & Qualifications** + Experience with batch record keeping and inspection processes. **Why Work Here?** We offer comprehensive health benefits, including medical, dental, and vision insurance, along with a 401k plan. Join a team that values your well-being and professional growth. **Work Environment** This role requires working in a hot, non-climate controlled environment. Available shifts are 1st shift from 6 am to 4 pm and 2nd shift from 4 pm to 2 am. **Job Type & Location** This is a Contract to Hire position based out of Omaha, NE. **Pay and Benefits** The pay range for this position is $17.00 - $18.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Omaha,NE. **Application Deadline** This position is anticipated to close on Dec 16, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

At Corteva Agriscience, you will help us grow what's next. No matter what your role, you will be part of a team that is building the future of agriculture - solving the world's food problems through innovation, technology, and putting people first. We have an exciting opportunity for a Production Technician to join our company at our Doniphan, NE production facility. VISA Sponsorship is not available for this position. Relocation assistance not offered for this position. This role will be on-site at the Corteva location. What You'll Do: * Run a variety of process equipment. * Ensure compliance with Quality Plan Work Instructions and Quality Plan requirements. * Collect and record data for continuous improvement projects and production records. * Support preventative maintenance (PM) and other general repair efforts. * Assist with warehousing activities including forklift operation. * Use automation and computerized systems to perform work tasks (computers, iPads, etc). * Perform field management activities such as scouting, field maintenance, logistical planning and maintain relationships with external partners (growers, contractors, etc). * Assist with harvest activities such as preparation, seed sampling, truck unloading, and other relevant processes as well as leading work areas. * Various other duties as assigned. Education: * You have your High School Diploma/GED OR are willing and able to obtain your GED within a specified time frame of hire as a condition of employment. What Skills You Need: * You are willing and able to do the following with or without reasonable accommodation: Climb and/or work in elevated areas, stand and sit for extended periods, work both outdoors and indoors in hot, cold, wet and dry conditions, lift up to 50 lbs, and perform work that involves repetitive motion and/or repetitive lifting. * You are able to work independently as well as in a team environment. * You are comfortable with technology (computers, iPads, etc), have good computer skills and are experienced with Microsoft Outlook, Excel and Word. * You have good written, verbal and interpersonal communication skills. * You have high attention to detail can multitask, maintain an organized workplace and have excellent problem-solving skills. * You value health and safety! You will always work safely and follow all safety policies and procedures to ensure you and your colleagues go home safely every day. * You are proactive, communicate concerns, and are accepting of change. * You are legally able to work in the United States. No visa sponsorship/support is available for this position, including for any type of U.S. permanent residency (green card) process. * You have a valid US driver's license, so you are able to drive a company vehicle to field locations when needed. * You are willing/able to work a rotating shift and overtime hours including weekend work as needed during seasonal peaks to support production demand. What Makes You Stand Out: * Associate degree or two-year Trade School degree. * Knowledge of lean manufacturing principles such as 5S, Continuous Improvement and Standardized Work. * WMS and SAP/ERP system experience. * Forklift operation experience. * Previous leadership experience. See what it's like to work at our Seed Production locations, please visit : ************************************************************************ Benefits - How We'll Support You: * Numerous development opportunities offered to build your skills * Be part of a company with a higher purpose and contribute to making the world a better place * Health benefits for you and your family on your first day of employment * Four weeks of paid time off and two weeks of well-being pay per year, plus paid holidays * Excellent parental leave which includes a minimum of 16 weeks for mother and father * Future planning with our competitive retirement savings plan and tuition reimbursement program * Learn more about our total rewards package here - Corteva Benefits * Check out life at Corteva! ************************************* Are you a good match? Apply today! We seek applicants from all backgrounds to ensure we get the best, most creative talent on our team. Corteva Agriscience is an equal opportunity employer. We are committed to embracing our differences to enrich lives, advance innovation, and boost company performance. Qualified applicants will be considered without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, military or veteran status, pregnancy related conditions (including pregnancy, childbirth, or related medical conditions), disability or any other protected status in accordance with federal, state, or local laws.

We are the leading provider of professional services to the middle market globally, our purpose is to instill confidence in a world of change, empowering our clients and people to realize their full potential. Our exceptional people are the key to our unrivaled, culture and talent experience and our ability to be compelling to our clients. You'll find an environment that inspires and empowers you to thrive both personally and professionally. There's no one like you and that's why there's nowhere like RSM. Position Description At RSM, interns work with large and small companies in various industries. They develop strong working relationships with clients built on understanding their businesses and challenges. Interns work on multiple team engagements each year, including several pieces of any particular assignment - not just one part. Working in a mutually respectful team environment helps our associates perform at their best and integrate their career with their personal life. Examples of the candidate's responsibilities include: Understanding clients' needs and expectations, their business and industry, accounting and control systems, employees, company values and industry-related GAAP and GAAS issues Developing an understanding of the RSM audit approach and tools Assessing risks and evaluating the client's internal control structure Performing substantive tests and tests of internal controls to identify and resolve accounting or reporting issues Drafting financial statements under prescribed formats Basic Qualifications: 90 credit hours completed Working towards B.A. / B.S. degree or equivalent from accredited university Accounting Major Travel to assigned client locations is required. Must have access to and ability to arrange for use of reliable modes of transportation to those locations A minimum 3.0 GPA is preferred At RSM, we offer a competitive benefits and compensation package for all our people. We offer flexibility in your schedule, empowering you to balance life's demands, while also maintaining your ability to serve clients. Learn more about our total rewards at ************************************************** All applicants will receive consideration for employment as RSM does not tolerate discrimination and/or harassment based on race; color; creed; sincerely held religious beliefs, practices or observances; sex (including pregnancy or disabilities related to nursing); gender; sexual orientation; HIV Status; national origin; ancestry; familial or marital status; age; physical or mental disability; citizenship; political affiliation; medical condition (including family and medical leave); domestic violence victim status; past, current or prospective service in the US uniformed service; US Military/Veteran status; pre-disposing genetic characteristics or any other characteristic protected under applicable federal, state or local law. Accommodation for applicants with disabilities is available upon request in connection with the recruitment process and/or employment/partnership. RSM is committed to providing equal opportunity and reasonable accommodation for people with disabilities. If you require a reasonable accommodation to complete an application, interview, or otherwise participate in the recruiting process, please call us at ************ or send us an email at *****************. RSM does not intend to hire entry-level candidates who require sponsorship now or in the future. This includes individuals who will one day request or require RSM to file or complete immigration-related forms or prepare letters on their behalf in order for them to obtain or continue their work authorization. RSM will consider for employment qualified applicants with arrest or conviction records in accordance with the requirements of applicable law, including but not limited to, the California Fair Chance Act, the Los Angeles Fair Chance Initiative for Hiring Ordinance, the Los Angeles County Fair Chance Ordinance for Employers, and the San Francisco Fair Chance Ordinance. For additional information regarding RSM's background check process, including information about job duties that necessitate the use of one or more types of background checks, click here. At RSM, an employee's pay at any point in their career is intended to reflect their experiences, performance, and skills for their current role. The salary range (or starting rate for interns and associates) for this role represents numerous factors considered in the hiring decisions including, but not limited to, education, skills, work experience, certifications, location, etc. As such, pay for the successful candidate(s) could fall anywhere within the stated range. Compensation Range: $29 - $34 per hour

**_What Quality Assurance contributes to Cardinal Health_** Quality develops and implements quality policies, procedures, and processes to ensure products and services comply with regulatory standards and specifications. Quality Assurance develops and implements a compliant and cost effective quality system that assures products and services are reliable, safe and effective. This job family provides oversight of production/manufacturing activities, training to operational and quality control personnel, and educates business leaders on Quality policies and procedures and ensures that all products and services are properly reviewed for quality and documented. **_Job Summary_** The Specialist, Quality Assurance executes quality programs, policies, and procedures in a particular area of specialty (such as recalls and customer complaints) in order to minimize risks and drive supply chain integrity. With basic knowledge of quality assurance concepts, the Specialist creates reports on quality metrics and trends in support of resolutions to quality issues and the development of standard operating procedures. The Specialist frequently seeks guidance from more experienced Senior Specialists or Principal Specialists and assists on more complex projects to develop advanced knowledge and technical capabilities. **_Responsibilities_** + Lead the efforts within Cardinal Health to collect substance information on products and raw materials from suppliers + Load and extract product systematic data on substances within Cardinal Health Master Data systems + Review and evaluate received questionnaire forms for completeness and applicability + Coordinate with Supplier, Sourcing, Quality, Regulatory and Manufacturing teams to obtain information necessary to complete assigned tasks + Identify and quantify risk, communicate results effectively to management + Support management of QRA policies governing product quality data + Identify quality and regulatory related issues within current processes, investigate and provide recommendations + Interact with cross-functional business partners (Customers, Operations, Sourcing, Regulatory, Manufacturing Quality, field QRA, etc.) to assist in execution of the current Medical Distribution Quality Plan. + Responsible for deployment of policies and programs to minimize risk and enable compliant business operations for Cardinal Health + Demonstrates working knowledge of applicable laws and regulatory concepts utilized to manage risk + Supports development of programs, policies and procedures using knowledge of regulatory requirements and technologies + Works to understand complex functional situations by paying attention to the details of the tasks at hand and by breaking them down into smaller pieces + Proactively develops and maintains a broad knowledge of the technical disciplines in own functional area; applies broad knowledge of trends and best practices in a manner that ensures exceptional performance and results + Uses deep subject matter/functional expertise; influence and process skills to help internal/external customers and stakeholders identify and meet their high priority needs while considering cultural and diversity implications + Encourages informed risk-taking and acts as a catalyst for innovation at Cardinal Health; generates practical, sustainable and creative options to solve problems and create business opportunities, while maximizing existing resources + Champions and leads change initiatives; identifies the best approach for implementing strategic processes; in light of culture and diversity **_Qualifications_** + Bachelor's degree preferred + 1-3 years experience preferred + Knowledge of Regulated Substances regulations such as EU MDR, REACH, RoHS, WEE, POP and California Proposition 65 preferred + Distribution Operations processes (Medical and Pharmaceutical) preferred + Excellent verbal, written, computer, SAP, and interpersonal skills required + Excellent influencing skills + Must be able to multitask and work with competing priorities **_What is expected of you and others at this level_** + Works to understand complex functional situations by paying attention to the details of the tasks at hand and by breaking them down into smaller pieces + Proactively develops and maintains broad knowledge of the technical disciplines in own functional area(s); applies broad knowledge of trends and best practices in a manner that ensures exceptional performance and results + Uses deep subject matter/functional expertise, influence and process skills to help internal/external customers and stakeholders identify and meet their high priority needs while considering cultural and diversity implications + Encourages informed risk-taking and acts as a catalyst for innovation at Cardinal Health; generates practical, sustainable and creative options to solve problems and create business opportunities, while maximizing existing resources + Champions and leads change initiatives; identifies the best approach for implementing strategic processes in light of cultural and diversity implications **Anticipated hourly range:** $26.90 per hour - $36.90 per hour **Bonus eligible:** No **Benefits:** Cardinal Health offers a wide variety of benefits and programs to support health and well-being. + Medical, dental and vision coverage + Paid time off plan + Health savings account (HSA) + 401k savings plan + Access to wages before pay day with my FlexPay + Flexible spending accounts (FSAs) + Short- and long-term disability coverage + Work-Life resources + Paid parental leave + Healthy lifestyle programs **Application window anticipated to close:** 12/07/2025 *if interested in opportunity, please submit application as soon as possible. The salary range listed is an estimate. Pay at Cardinal Health is determined by multiple factors including, but not limited to, a candidate's geographical location, relevant education, experience and skills and an evaluation of internal pay equity. _Candidates who are back-to-work, people with disabilities, without a college degree, and Veterans are encouraged to apply._ _Cardinal Health supports an inclusive workplace that values diversity of thought, experience and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. Cardinal Health is an Equal_ _Opportunity/Affirmative_ _Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law._ _To read and review this privacy notice click_ here (***************************************************************************************************************************

Please, review and apply for this position through the QCI system following the link below (Copy and Paste): http://jobs.qcitech.com/jobseeker/Quality_Assurance_Supervisor_J02117290.aspx *You can apply through Indeed using mobile devices with this link. Additional Information

ADS BIOTEC is a growing Biotechnology company based in Omaha. We manufacture reagents for laboratory and pilot scale processes for life sciences. We also manufacture robotic instrumentation for laboratory automation of biological sample processing. Job Title Liquids Production Technician Location Omaha, NE Job Type Full-Time Job Summary The Liquids Production Technician is responsible for operating and maintaining equipment used in the production of liquid products. This role ensures efficient, safe, and high-quality production processes while adhering to strict safety and quality standards. The ideal candidate is detail-oriented, mechanically inclined, and thrives in a dynamic manufacturing setting. Key Responsibilities Equipment Operation: Operate production equipment, such as mixers, blenders, filling machines, and pumps, to produce liquid products according to batch specifications and production schedules. Process Monitoring: Monitor and adjust production processes to maintain consistency, troubleshoot equipment issues, and minimize downtime. Additional Production Areas: Additional production areas will be to assemble, and QC tubing and fittings and similar hardware components used with these consumable products. Sanitation and Maintenance: Perform routine cleaning, sanitization, and preventive maintenance on equipment to ensure operational efficiency and compliance with hygiene standards. Safety Compliance: Follow all safety protocols, including proper handling of chemicals, use of personal protective equipment (PPE), and adherence to standard operating procedures (SOPs). Documentation: Accurately record production data, batch records, equipment logs, and quality control results. Teamwork: Collaborate with production team members, supervisors, and quality control staff to ensure smooth operations and timely production goals. Process Improvement: Identify and suggest improvements to enhance efficiency, reduce waste, and improve product quality. Qualifications Education: High school diploma or equivalent required; technical certification or associate degree in manufacturing, chemical processing, or related field preferred. Experience: 1-3 years of experience in liquids manufacturing, chemical processing, mechanical assembly or a similar production environment. Entry-level candidates with relevant training may be considered. Skills: Basic mechanical and troubleshooting skills for production equipment. Ability to read and follow technical documents, batch FMP's (mfg. instructions), and SOPs. Strong attention to detail and commitment to producing high-quality products. Basic computer skills for data entry and equipment operation. Ability to work efficiently in a fast-paced environment. Physical Requirements: Ability to lift up to 50 pounds and stand for extended periods. Comfortable working in a manufacturing environment with exposure to chemicals, moderate noise, and varying temperatures. Working Conditions Work is performed in a manufacturing facility with exposure to chemicals, machinery, and moderate noise levels. Work is 8 hour day, Monday thru Friday. Use of PPE (e.g., gloves, safety glasses, protective clothing) is required. Benefits 401(k) with company matching Dental insurance Health insurance Flexible spending account or Health Savings Account Vision insurance Employee assistance program Paid time off

Serious Medicine is what we do. Being extraordinary is who we are. Every colleague plays a key role in upholding this promise to our patients and their families. Shift: First Shift (United States of America) Shift Details: M-F 8:30-5pm or 9:00am - 5:30pm Call rotation is 2 weeks on, 3 weeks off. Why Work at Nebraska Medicine? Together. Extraordinary. Join a team that values your skills, delivering exceptional care through collaboration. Leading Health Network Work with the region's top academic health network, partnering with UNMC to transform lives through education, research, and patient care. Dignity and Respect: We value all backgrounds and experiences, reflecting the communities we serve. Educational Support Enjoy up to $5,000/year in tuition assistance, a 35% discount at Clarkson College, and career advancement opportunities with covered educational costs. Enjoy support for your personal growth within the organization, from those just starting their healthcare careers to those who are years down the path. Be part of something extraordinary at Nebraska Medicine! Support all processes and services the facility provides to the organization and/or contract entities. Learn and develop a comprehensive skill set for current good manufacturing practices (cGMP) and current good tissue practices (cGTP) manufacturing that currently includes, but is not limited to, the areas of cell, gene, and tissue-based therapies. Perform and report clinical laboratory procedures using job-acquired technical and specialized knowledge according to Standard Operating Procedures, applicable laws and regulations, and accreditation standards. Support continuous performance and process improvements of laboratory processes/services to ensure high quality and timely manufacture of products. Required Qualifications: • Bachelor's degree in a scientific field, laboratory related science, or medical laboratory science required. • ASCP or AABB certification required within 1 year of hire. Preferred Qualifications: • Clinical laboratory or research experience preferred. • Prior clean room/good manufacturing practices GMP work experience preferred. • Master's degree in a scientific field, laboratory related science, or medical laboratory science preferred. Nebraska Medicine is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, marital status, sex, age, national origin, disability, genetic information, sexual orientation, gender identity and protected veterans' status.

How will you contribute to the team? - Collect, compile, and analyze data from the physical work site, surveys, structural plans, blueprints, schematics, data, technical drawings, flow diagrams, material sampling, computer-generated reports, and other matrices for single, multi-phase, or multi-site field inspection activities. - Perform inspections on projects of moderate to increased complexity and/or scope, including proposed and existing site conditions, equipment, construction, materials, controls, resources, layout, alignment, and elevation to determine conformance with applicable rules, standards, codes, and construction or operating permits. - Follow standard practices to provide technical assistance and guidance that accounts for the proper inspection, construction, and functioning of buildings, , materials, structures, infrastructure, equipment, and/or mechanical systems according to design standard - Act as consultant regarding work progress and problem resolution; may serve as the only inspector on a construction project or assist in overseeing construction inspection activities for projects of a moderate/large scope and complexity within a district. - Perform an initial check during the first phase of construction and follow-up inspections throughout the construction project; at completion, performs a final, comprehensive inspection and provides written and oral feedback related to their findings. - Work as an individual or as part of a cross-functional team to execute inspection work; occasionally leading tasks and inspection staff for technical or field assignments on project work. - Attend pre-construction meetings and answer questions from contractors and other -Write technical reports summarizing inspection findings and conclusions; generating complete, accurate, and concise documentation using photographs, sketches, calculations, software, spreadsheets, technical drawings, flow diagrams, 2D/3D illustrations, and reports. - Provide guidance and training to entry-level inspection staff. Engage in contact with client and contractor personnel to schedule and coordinate project inspection. - Assist in the analysis, evaluation, and interpretation of data obtained during site inspections, offering input with developing action plans for low to mid-level risk environmental, construction, installation, equipment operations, and/or mitigation - Remain current in latest inspection and construction knowledge, techniques, and - Perform additional responsibilities as required by business needs. What will you contribute? - High School Diploma. - Minimum of 10 years of relevant post education experience in discipline with prior construction inspection experience. - Valid state drivers license. - Advanced knowledge of construction inspection principles, field inspection practices, process, methods and techniques. - Advanced knowledge of relevant construction codes, regulations, compliance practices, and record-keeping requirements. - Ability to make technical computations and calculations involving the application of construction inspection principles, understanding plans and specifications, and making factual comparisons to the appropriate standards or regulations. - Ability to plan and conduct inspections and investigations on various aspects of the construction and installation of equipment, materials, and systems. -Capable interpersonal and communication skills when interacting with others, expressing ideas effectively and professionally to a technical and non-technical audience. - Effective self-leadership with attention to detail, results orientation, and managing multiple priorities in a dynamic work environment. - Ability to learn new techniques, perform multiple tasks simultaneously, follow instruction, work independently, and comply with company policies. - Proven track record of upholding workplace safety and ability to abide by WSPs health, safety and drug/alcohol and harassment policies. - Ability to work schedules conducive to project-specific requirements that may extend beyond the typical workweek. - Bachelors Degree in closely related discipline is preferred

Job DescriptionCompany Highlight Standard Iron has been in the contract manufacturing business for over 90 years! We are seeking quality employees who share our Core Values of Safety, Respect, Pride in Work and Continuous Improvement. Shift Information 1st Shift: Mon - Fri Salary Range $19.75 - $22.68 Job Responsibilities: • Promote Standard Iron's Core Values of Safety, Pride in Work, Respect, Continuous Improvement." • Manage ISIR workload through use of ISIR dispatch report. • Facilitate actions required when Non-Conformances arise, both external and internal, including customer communications. • Sustain quality procedures, systems, and requirements to assure customer satisfaction." • Interpret customer prints, specifications, weld, and workmanship standards. • Perform part inspections for ISIR's and other production parts as needed. • Update part specific Control Plans as quality issues dictate. • Assist in Gage R&R and Process Capability Studies. • Engage in Tier II Triangle activities including daily meetings to support continuous improvement. • Coordinate the calibration of metrology equipment, gages, and test equipment when needed. • Other duties as assigned by the Quality Manager. Qualifications: • Trigonometry basics and math skills, which include proficiency with fractions, decimals and both standard and metric dimensions. • Experience with blueprint reading including basic dimensioning, true position, and welding callouts. • Proficient in use of inspection equipment including weld gages, calipers, micrometers, height stands, and protractors. • Good computer skills with proficiency with Microsoft Work & Excel. • Effective communication skills and working in a Team environment. • Experience with portable arm Coordinate Measurement Machine's preferred but not required. • ASQ Certification or previous quality experience preferred. Benefits: • Health, Dental, Vision and Life Insurance **Health Insurance co-pay plans available with no deductibles and no co-insurance • PTO - earn 80 hours 1st year. Optional PTO purchase program • 80 hours paid Holidays • Quarterly Profit-Sharing • 401(k) with employer match funded each pay period • Flexible Scheduling • Tuition Reimbursement and on the job training/skills development • Reimbursements for safety boots, glasses, welding hood • Fun work environment with employer sponsored activities Standard Iron Website Facility Video Equal Opportunity Employer Powered by JazzHR ZeHsAMyEcD

Job DescriptionDescriptionWho We Are: We're building a better way to donate plasma - one that's fast, friendly, and powered by smart technology - our donor app makes booking and earning easy for donors, and our team makes every visit feel welcoming and personal. We've grown from 2 to 30+ locations in under 3 years, and we're just getting started. If you want to grow your career with a high-energy team, this is a great opportunity. What You'll do: As the Center Quality Assurance Supervisor, you'll own the regulatory and compliance program at the Donor Center, ensuring it operates at the highest standards of compliance, accuracy, and safety. You will be a key part of our culture of quality, holding the team accountable while creating a positive environment for the team and our donors. You will have a unique opportunity to be part of a high-growth organization, one that is changing rapidly and creating new opportunities for our high-performing team members. Compensation: Up to $70K ($50K - $55K base + up to 25% monthly bonus) + benefits Travel: 8 weeks of paid training with travel and accommodations provided Key Responsibilities Lead quality programs, including overseeing inspections, audits, and corrective action plans. Keep the center audit-ready by maintaining compliance with industry, government, and company regulations at all times. Provide independent oversight - maintain quality checks and documentation separate from daily operations to ensure objectivity. Support center leadership - work closely with the Center Director to maintain safety and operational excellence. Improve processes - track trends, analyze data, and implement plans to increase efficiency and reduce risk. Oversee training and knowledge - ensure staff are trained and compliant with new policies and procedures. Required Qualifications 3+ years of experience in a regulated or process-driven environment (e.g., manufacturing, clinical, or business settings) High school diploma, GED equivalent, or higher education Ability to lift 50 lbs., sit or stand for extended periods, and enter cold environments (-40°ree;C) for short periods Ability to work day and evening hours, weekends, holidays and extended shifts as needed. Who You Are A Detail -Oriented Problem Solver - You take ownership. You're excited to get in the weeds, know how to creatively prioritize and solve a long, ambiguous, and evolving task list, are trustworthy and outcomes oriented An Empathetic Communicator - You know how to adapt your communication style to meet different audiences (staff with different styles, donors, Ops leadership); you have strong conflict resolution skills, are even-keeled under pressure, and know how to motivate and inspire others A Development-Minded Employee - You are self-aware and curious, have integrity, and have a track record of steep learning curves A Data-Driven Decision Maker - You are metrics driven, have strong logical reasoning and decision-making skills, aren't distracted by one-offs or edge cases Who You Are Not Someone who isn't excited to get their hands dirty - while you are hired for a role, our operations are often unpredictable, and we need people willing to jump in where they're needed. Someone who doesn't thrive in an environment of continuous change - we are in a hypergrowth stage, which is unique for this industry. We need people who are excited to be with us on this rollercoaster. Someone who wants to clock in and clock out. We are looking for team players who care about the impact their centers have on their communities and the plasma-based medicine, which takes a true ownership mentality and often extra hours. Why Join Parachute? Competitive compensation with bonus potential Medical, Dental, and Vision insurance Paid time off Company paid holidays Career growth opportunities

Job Description Any salary estimation specified in this job board may or may not be aligned with our organization's pay philosophy. Apply to connect with a Talent Acquisition Partner who can provide you more details! Cleaver-Brooks is searching for someone to join our team in Lincoln as a Quality Control Technician (2nd Shift; 3:30pm - Midnight, M-F) and are specifically looking for someone who has had previous experience in this field. You will test and inspect products at various stages of the production process and compile and evaluate statistical data to determine and maintain quality and reliability of products. If you feel you possess the capabilities for this position, then take the first steps to becoming part of our team by applying online! Basic Function: Test and inspect pressure vessel products at various stages of the production process. Compile and evaluate statistical data to determine and maintain quality and reliability of products by performing the following duties: Essential Duties: Basic Welding and Metal Fabrication Material Receiving Inspections Use Microsoft Office (Outlook, Excel, Word, Access) and IFS software Verify Fabricated Products meet Design Specifications within Tolerance Provide Training/Presentations to individuals and small to mediums sized groups Read Welding Fabrication Drawings and Bills of Material Perform hydrostatic tests of pressure retaining products Visual Weld Examinations (VT) Utilize Inspection and Test Plans to Control the Quality of Product Fabrication Supervise Welding Performance Qualification Tests Perform statistical analysis of inspection data Apply intellect, creativity, adaptability, judgment, and management skills to achieve required results. Demonstrates enthusiastic, cooperative, and positive behavior. Maintain a favorable working relationship with all employees to foster and promote a cooperative and harmonious working climate. Perform all duties and responsibilities in a timely and effective manner in accordance with established policies to achieve overall objectives of this position. Apply intellect, creativity, adaptability, judgment, and management skills to achieve required results. Ensure duties and company projects are accomplished in an efficient and cost effective manner. Support peers and management with internal and external projects. Adhere to company policies. All other duties as assigned. External Contacts: Minimal-third party and customer inspectors. Education: High School Diploma plus AAS degree in Non Destructive Testing (NDT) or Electronics preferred. Physical Skill and Effort ... Must be able to lift up to 80 lbs. 48” high and up to 50 lbs. overhead on an occasional basis. Must be able to work up to 12 hours standing and walking on hard cement surface and will be required to regularly bend, stretch, stoop, squat and climb ladders up to 8 feet high. Must be able to work in confined spaces as narrow as 16” in diameter. Will require working in areas up to 25 feet from the ground. Must be able to climb stairs and work in temperature ranges corresponding with the outside ambient temperatures, in welding shop environment; must be able to access all areas of the plant both inside and outside. Must be able to differentiate between control wire colors. (yellow, blue, red, etc) Working Conditions and Hazards ... Normal plant, shop, field or office conditions. From time to time, slightly disagreeable features; negligible/little or no exposure. Do You Qualify ... Education: High School Diploma plus AAS degree in Non Destructive Testing (NDT) preferred. Experience: 1 - 5 years related experience in welding, boiler or related manufacturing industry. Certified Welding Inspector (CWI) certification, and prior quality control technician experience preferred. Ability to work independently, read blueprints, welding symbols and follow ASME Section 1 code required. ASNT SNT - TC - 1A in UT or RT experience a plus. Must have excellent Microsoft Office Software/computer skills; ERP/MRP/IFS, Lean/Six Sigma experience preferred. Benefits of Being a Cleaver-Brooks Employee … We offer a competitive salary and comprehensive benefits package, including medical, dental, vision, flexible spending account, health savings account, wellness benefits, life insurance, short term and voluntary long term disability, cash matching 401(k) plan, generous vacation and 11 paid holidays. This description indicates the general nature of the tasks and responsibilities required of position given this classification. It is not intended as a complete list of specific duties and responsibilities. Nor is it intended to limit or modify the right of management to assign, direct, and control the specific duties of individuals performing this function. The Company reserves the right to change, modify, amend, add to or delete from any section of this document as it deems, in its judgment, to be proper. This description supersedes any previous descriptions for this position . To Apply … Qualified applicants must apply online at ********************** click on “Careers”, then on the link to “Cleaver-Brooks Careers”, then on “Quality Control Technician - Lincoln, NE and apply. Cleaver-Brooks is an Equal Opportunity/Affirmative Action Employer.

Any salary estimation specified in this job board may or may not be aligned with our organization's pay philosophy. Apply to connect with a Talent Acquisition Partner who can provide you more details! Cleaver-Brooks is searching for someone to join our team in Lincoln as a Quality Control Technician (2nd Shift; 3:30pm - Midnight, M-F) and are specifically looking for someone who has had previous experience in this field. You will test and inspect products at various stages of the production process and compile and evaluate statistical data to determine and maintain quality and reliability of products. If you feel you possess the capabilities for this position, then take the first steps to becoming part of our team by applying online! Basic Function: Test and inspect pressure vessel products at various stages of the production process. Compile and evaluate statistical data to determine and maintain quality and reliability of products by performing the following duties: Essential Duties: Basic Welding and Metal Fabrication Material Receiving Inspections Use Microsoft Office (Outlook, Excel, Word, Access) and IFS software Verify Fabricated Products meet Design Specifications within Tolerance Provide Training/Presentations to individuals and small to mediums sized groups Read Welding Fabrication Drawings and Bills of Material Perform hydrostatic tests of pressure retaining products Visual Weld Examinations (VT) Utilize Inspection and Test Plans to Control the Quality of Product Fabrication Supervise Welding Performance Qualification Tests Perform statistical analysis of inspection data Apply intellect, creativity, adaptability, judgment, and management skills to achieve required results. Demonstrates enthusiastic, cooperative, and positive behavior. Maintain a favorable working relationship with all employees to foster and promote a cooperative and harmonious working climate. Perform all duties and responsibilities in a timely and effective manner in accordance with established policies to achieve overall objectives of this position. Apply intellect, creativity, adaptability, judgment, and management skills to achieve required results. Ensure duties and company projects are accomplished in an efficient and cost effective manner. Support peers and management with internal and external projects. Adhere to company policies. All other duties as assigned. External Contacts: Minimal-third party and customer inspectors. Education: High School Diploma plus AAS degree in Non Destructive Testing (NDT) or Electronics preferred. Physical Skill and Effort ... Must be able to lift up to 80 lbs. 48” high and up to 50 lbs. overhead on an occasional basis. Must be able to work up to 12 hours standing and walking on hard cement surface and will be required to regularly bend, stretch, stoop, squat and climb ladders up to 8 feet high. Must be able to work in confined spaces as narrow as 16” in diameter. Will require working in areas up to 25 feet from the ground. Must be able to climb stairs and work in temperature ranges corresponding with the outside ambient temperatures, in welding shop environment; must be able to access all areas of the plant both inside and outside. Must be able to differentiate between control wire colors. (yellow, blue, red, etc) Working Conditions and Hazards ... Normal plant, shop, field or office conditions. From time to time, slightly disagreeable features; negligible/little or no exposure. Do You Qualify ... Education: High School Diploma plus AAS degree in Non Destructive Testing (NDT) preferred. Experience: 1 - 5 years related experience in welding, boiler or related manufacturing industry. Certified Welding Inspector (CWI) certification, and prior quality control technician experience preferred. Ability to work independently, read blueprints, welding symbols and follow ASME Section 1 code required. ASNT SNT - TC - 1A in UT or RT experience a plus. Must have excellent Microsoft Office Software/computer skills; ERP/MRP/IFS, Lean/Six Sigma experience preferred. Benefits of Being a Cleaver-Brooks Employee … We offer a competitive salary and comprehensive benefits package, including medical, dental, vision, flexible spending account, health savings account, wellness benefits, life insurance, short term and voluntary long term disability, cash matching 401(k) plan, generous vacation and 11 paid holidays. This description indicates the general nature of the tasks and responsibilities required of position given this classification. It is not intended as a complete list of specific duties and responsibilities. Nor is it intended to limit or modify the right of management to assign, direct, and control the specific duties of individuals performing this function. The Company reserves the right to change, modify, amend, add to or delete from any section of this document as it deems, in its judgment, to be proper. This description supersedes any previous descriptions for this position . To Apply … Qualified applicants must apply online at ********************** click on “Careers”, then on the link to “Cleaver-Brooks Careers”, then on “Quality Control Technician - Lincoln, NE and apply. Cleaver-Brooks is an Equal Opportunity/Affirmative Action Employer.

ESSENTIAL FUNCTIONS Follow all company Policies and Procedures, Quality and Environmental Management Systems (QMS & EMS), Kawasaki Production System (KPS) and any other legal and compliance regulations that may apply such as OSHA. Inspect materials, products and/or production operations for conformance to specifications by dimensional, visual and physical testing means. Compare inspection results with written specifications such as engineering drawings, technical specifications, inspection lists, standards and visual aids. Record and report inspection results. May assist or lead investigations to determine root causes for process and/or product abnormalities. May quarantine, sort and/or rework product to support Production and maintain quality product. May package quarantined, sorted and/or reworked product and complete documentation to distribute. May replace and/or calibrate measuring equipment and maintain proper equipment documentation. Communicate inspection data results to appropriate personnel and request adjustments when necessary. Performs job duties in a safe and appropriate manner as well as follows all work and safety rules including any specialized safety and health training. Responsible for cleanliness of work area. POSITION QUALIFICATIONS KMM Core Competencies - Accountability, Adaptability, Attendance, Communication, Integrity, Productivity, Quality, Respect, Safety Awareness and Teamwork Experience in quality control inspection, or an equivalent experience of fabrication and assembly. Accuracy - Ability to perform work accurately and thoroughly. Assertiveness - Ability to act in a self-confident manner to facilitate completion of a work assignment or to defend a position or idea. Calibration Techniques - Ability to learn and follow a variety of calibration techniques applicable to current and new tools and equipment. Customer-Oriented - Desire to serve our customers by focusing effort on meeting the customer's needs, understanding their concerns, and seeking to build trust. Detail-Oriented - Ability to pay attention to the minute details of a project or task. Initiative/Self-Motivated - Achieves desired outcomes with little supervision; being selfdriven and task oriented. Language Skills - Must be able to speak and understand English. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively one-on-one or to groups, as necessary. Measuring Equipment - Able to understand and use small measuring devices such as calipers, micrometers, gauges, etc. Multi-tasking - Able to handle multiple tasks and competing demands; knowledge of priorities and ensures all issues are addressed. Organizational Skills - Develops or uses systems to organize and keep track of information (e.g., "to-do" lists, appointment calendars, follow-up file systems).Sets priorities with an appropriate sense of what is most important and plans with an appropriate and realistic sense of the time demand involved. Problem Sensitivity - The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem. Stress Tolerance - Job requires accepting criticism and dealing calmly and effectively with high stress situations SKILLS & ABILITIES Education/Experience: High School Graduate or General Education Degree (GED). Manufacturing experience preferred. Computer Skills: Displays appropriate proficiency with computers and computer applications, including: spreadsheets (e g, Excel), word processing (e g, Word), special applications. Other Requirements Required to wear company apparel. Required to complete core courses in KawaTech program

Company Description: Instinct is a rapidly growing, family-owned marketer and manufacturer of science-based 100% natural pet food for dogs and cats. Instinct is the Raw Brand, with a mission to get more raw nutrition into every bowl of dogs and cats, for proven healthier and happier long lives. Our company mission is to Empower people to transform the lives of pets . We are committed to hiring and developing a team of passionate, performance-oriented professionals who live by our 4 values of championing raw, empowered to make a difference, collaborating as one team, and striving for excellence through continuous learning and improvement. Our home office is located in St. Louis, Missouri with our Center of Excellence Raw Food kitchens in Lincoln, Nebraska. Instinct is part of the family-owned group, Agrolimen, who owns leading pet food and human food businesses in the US, China, Europe, and Africa. Position Summary: Rotating shift through three manufacturing facilities, performing quality audits and food safety monitoring in a pet food processing facility. This includes monitoring raw materials, processing areas, finished product and providing accurate documentation to support the SSOP, GMP & HACCP programs, and labs. Key Responsibilities: Executing activities related to reviewing, monitoring, documenting, and assessing food safety and quality standards to verify materials are compliant with product specifications including, but not limited to net weights, product quality, product codes/labels, temperatures, CCP's Gather product samples from production lines to identify defective and non-conforming products and take appropriate corrective action if necessary Gather product samples from production lines aseptically for product testing; ensure on-time sample pick-up for product release Ensure cGMPs and best practices are being followed by auditing the facility and personnel daily for compliance Monitor production processes, personnel, and facilities to ensure adherence to cGMP, FSMA, HACCP, SQF, Sanitation guidelines, etc.; taking corrective action as necessary if standards are not being met Assist in employee training as needed for Food Safety and Quality tasks Pre-Op inspection of processing area/equipment before the start of operations to verify cleanliness Perform swabbing to verify the cleanliness of equipment and surrounding environment Generate complete and accurate documentation of all monitoring activities; distribute all reports in a timely manner Perform scale and thermometer verifications; calibrations of other equipment may also be required Communicate with all cross-functional departments to notify them of issues, take appropriate actions and resolve problems; may assist in non-conforming product investigations and CAPA's Perform verification activities for FS&Q documentation Maintain organization and inventory of on-site product samples/retains. Enter data in spreadsheets as required Support Food Safety and Quality initiatives and data collection Other assigned projects and other tasks/duties when appropriate Crosstrain and support onsite laboratory as needed Assist with preparations for SQF audit Back-up for other QA personnel Assist with fostering Food Safety/Quality Culture within Instinct manufacturing E-Systems: Microsoft Office Tools (Excel, Outlook), ERP (QAD), Electronic monitoring system (Redzone) Must be able to occasionally lift up to 50 pounds Must be willing to work in refrigerated temperatures (40F to 50F) Other duties as assigned Personal Attributes: High Values: integrity (do the right thing), encourager, courteous, respectful and trustworthy Team player: work effectively across levels and departments, cover responsibilities of others, and work holidays/weekends as needed A self-starter with the desire to follow work instructions and work with urgency Organized with the ability to prioritize and manage multiple things at once Effective verbal and written communicator Ability to remain calm in stressful and conflict situations Skills and Technical Expertise: Employee safety knowledge (Knowing what you can do to keep yourself and others free from work injuries) Food safety and quality knowledge (Knowing what you can do to assure safety, high-quality product) Sanitation knowledge (operational sanitation) Required Experience: Able to read, write and speak in English Must be able to perform in a manufacturing environment with temperatures of 40 -50 F Lifting of up to 50 lbs. may be required to perform audits Preferred Experience: Bilingual (Spanish, Vietnamese, Arabic, French) Prior experience in Production Compensation and Benefits: Competitive compensation includes health and dental insurance, life and AD&D insurance, flexible spending accounts, health savings accounts, short and long-term disability, paid time off, Purpose Days off for company partner volunteer opportunities, and 401k with company match. Our Instinct is to CHAMPION Diversity At Instinct, we are as passionate about our people as we are about the pets we call family. We are committed to inclusion, empowerment, and respect. We believe that just like our pets, what sets us apart unleashes our greatest strengths. We thrive on the ability to not only empower people to transform the lives of pets through raw nutrition, but also to empower each other to inspire a culture that celebrates our differences. Our unique approach to pet food is what makes us who we are as a company, and our individual identities are what makes us a successful, innovative, authentic team.

Job DescriptionSalary: 15.00 Graepel pays 100% of the employee's medical and dental premiums. Graepel also pays for all tuition costs, and fees including books. Graepel also pays the apprentice his/her hourly rate for days when student attends class (GET PAID TO GO TO COLLEGE!). POSITION SUMMARY The Industrial Manufacturing Technician Apprenticeship is a triad study program between Metro Community College, Graepel, and the Industry for Advanced Technical Training (ICATT). The position involves on-the-job training on each of the metal fabrication processes within Graepel. In addition to on-the-job training the apprentice will attend classes at Metro Community College (MCC). The standards and requirements of the program are set by the Industry Consortium for Advanced Technical Training (ICATT). Upon completion of the program the apprentice will receive an industrial technician certification and an Associates Degree. ESSENTIAL FUNCTIONS Reasonable Accommodations Statement To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Essential Functions Statements Work with Trainer to learn the metal fabrication processes start to finish through on-the-job training at all work stations. Attend classes at Metro Community College and maintain satisfactory grades as required throughout the term of program. Maintain documentation of the daily skills learned in a log book so day-to-day progress can be tracked and reviewed. Complete coursework and lessons as required by ICATT standards. Assist with production processes to gain on-the-job training and skills. Produce a part in a specific area to show the newly acquired skills developed during the apprenticeship. Work a regular schedule determined by supervisory management Perform other duties as assigned by supervisory personnel. POSITION QUALIFICATIONS SKILLS & ABILITIES Education: High School Diploma or equivalent required. Acceptance in to the college program via college placement exam. Experience: Ability to pass the ACCUPLACER examination or equivalent. Ability to work under supervision from a mentor. Ability to operate a forklift and obtain on the job training certification. Ability to operate power and hand tools. Ability to work in a team environment and/or independently. PHYSICAL DEMANDS Physical Demands Lift/Carry Stand F (Frequently) 10 lbs or less C (Constantly) Walk F (Frequently) 11-20 lbs C (Constantly) Sit F (Occasionally) 21-50 lbs F (Frequently) Handling/Fingering C (Constantly) 51-100 lbs O (Occasionally) Reach Outward F (Frequently) Over 100 lbs O (Occasionally) Reach Above Shoulder F (Frequently) Push/Pull Climb O (Occasionally) 12 lbs or less C (Constantly) Crawl O (Occasionally) 13-25 lbs C (Constantly) Squat or Kneel F (Frequently) 26-40 lbs F (Frequently) Bend F (Frequently) 41-100 lbs O (Occasionally) N (Not Applicable) Activity is not applicable to this position O (Occasionally) Position requires this activity up to 33% of the time (0 - 2.5+ hrs/day) F (Frequently) Position requires this activity from 33% - 66% of the time (2.5 - 5.5 hrs/day) C (Constantly) Position requires this activity more than 66% of the time (5.5+ hrs/day) Other Physical Requirements Vision (Near, Distance, Color, Peripheral, Depth Perception Sense of Sounds (Communication with personnel, ability to listen to machinery to make adjustments) Sense of Touch (Use of hands to carry and move material) Ability to wear Personal Protective Equipment (PPE) (Ear protection, steel toed boots, etc)

Interstates is currently seeking a full-time Panel Technician to join our Omaha manufacturing team. This role will provide direct support to Interfab, as defined in the primary job duties section, below. An ideal candidate will be results driven, safety-minded, and work well with a team. Interstates seeks ambitious, innovative individuals, with the ability to grow and maintain value-added relationships with our team and external customers. At Interstates, we offer competitive salary and fantastic benefits for you and your family. We place tremendous focus on training our employees while providing challenges and career development opportunities, so that each team member has the ability to reach their full potential. Responsibilities: * Reading blueprints * Assembling pre-fabricated electrical construction material * Assembling and pre-wiring light fixtures, receptacles, and switches * Bending and threading conduit * Other duties may be assigned Qualifications: * Excellent verbal communication * Ability to work cooperatively with others in a team environment and build effective relationships * Display a positive attitude * Strong attention to detail * Be results driven and safety minded * Ability to routinely lift 50-75lbs What we can offer: * Competitive WEEKLY Pay * Company Sponsored Holiday & Team Building Celebrations * Work/Life Balance (Average 45-50 hours/week) * Family-Like Culture - A team that cares about you as a whole person, not just what you do for work * Advancement Opportunities Benefits: * Health, Dental, Vision, and Life Insurance * Company-paid Short and long-term disability * Paid time off and Holidays * Matching 401k program * Pay for performance bonuses. * HSA contributions * Regular Business Hours * Flexible work schedule WORK ENVIRONMENT: While performing the duties of this job, this role is often exposed to high/precarious places, risk of electrical shock, and all outside weather conditions. This role is expected to climb and work at heights and in confined spaces. The noise level in the work environment is usually moderate. Due to the nature of our work and our client base, this role may involve tasks in an environment exposed to dust. Candidates should be comfortable working in these conditions and complying with safety standards to protect their well-being.