Quality assurance technician jobs in New Hampshire - 378 jobs

Quality Inspector Amphenol Ardent Concepts is a leading designer and manufacturer of high performance multicoax and coaxial assemblies, connectors, and sockets used in the development of next generation semiconductors and electronics systems. Our core technology is the smallest, fastest, most electrically efficient compression mount connector technology worldwide. As data rate requirements increase and devices and systems shrink, Ardent's products deliver superior signal integrity in a dense footprint that can be reusable across programs to maximize cost savings. RESPONSIBILITIES: The Quality Inspector performs incoming, in process, mechanical and final inspection tasks as assigned. The Quality Inspector performs a wide variety of inspection tasks involving a RAM Optical Vision System and associated hand tools recording results against a defined specification. The inspector determined acceptability and recommends disposition of defective items in accordance with the defined procedures. o Incoming Quality Inspection of components, assemblies, and raw materials utilizing RAM Optical Vision System and general hand tools per the specification assigned. o Perform final inspection on outgoing finished goods and prepare documentation when required. o Process non-conformances and help the MRB team to disposition as required. o Organize and document inspection results and non-conformances. o Communicate directly with vendors, engineering, and purchasing to discuss quality related items. o Assist in vendor specific quality metrics and vendor audits when required. SKILLS & QUALIFICATIONS: o The ideal candidate will have two years Inspection experience o Strong GD&T (General Dimension and Tolerances) a plus o Knowledge of general quality techniques, root cause analysis, and sampling plans. o Ability to read specifications, Solid Works familiarity a plus o Knowledge of measurement equipment, RAM Optical, tools, and gauges o Advanced Personal Computer Skills o Strong communication skills both written and oral o A self-starter who uses initiative and problem identification to find solutions. o Ability to lift up to 70 pounds.

Why Lindt USA? Join our nationally recognized culture and become part of our winning team of passionate, dynamic individuals who make an impact every day! Reap the benefits of joining a highly successful, fast-growing, company offering our employees meaningful career growth, professional development and a work/life balance: This Position: This individual is responsible to ensure products manufactured at Lindt & Sprüngli (L&S) USA meet or exceed L&S standards for quality, food safety, and regulatory compliance. This is accomplished by developing, following and improving upon established audit processes, policies and procedures. Also, the position is responsible for interpreting and enforcing policies to make ad hoc decisions in support of quality and food safety. Additionally, this individual is responsible for reviewing documents for compliance, reporting and partnering with all relevant stakeholders including: manufacturing, purchasing, R&D (Research & Development) and QA (Quality Assurance) teams. Key Responsibilities: * Responsible to perform and document production process audits to ensure compliance with L&S Quality and Food Safety Standards. * Audit and verify production and process paperwork, files and data measuring systems and equipment to ensure compliance. * Maintain Sanitation program, regularly audit the cleaning and sanitation practices within the production environment to ensure compliance with L&S Quality and Food Safety Standards. * Document and communicate quality issues, trend analysis, and provide corrective action for the resolution of quality issues. * Adhere to and enhance the plant's quality and food safety programs. Help meet all standards and requirements including and not limited to AIB, ISO 9001, FSSC 22000, FSMA (Food Safety Modernization Act), local and federal regulations as well as the industry's best practices; help strengthen food safety and quality; identify and solve quality related issues with a direct focus on continuous improvement. * Follow LPW methodology (TPM) in order to monitor and report production (PCS) and continuously improve processes in order to reduce defects as defined by LPW and lean methodology using tools such as 5S, 5 Why, Kaizen events etc. Compensation: Range: $25.00 - $30.00 per hour Lindt USA's salary range reflects market rates based on our size, revenue, and location. Starting pay is determined using a wide range of factors including, but not limited to, job-related skills, knowledge, and experience as well as market conditions. A bonus and/or long-term incentive may be included as part of this compensation package, for more information please reach out to our recruiting team. Our Perks & Amenities: In addition to a highly competitive salary, benefits package and professional development, Lindt USA offers an amazing, supportive culture that enables employees to thrive professionally while achieving work-life balance: * Start with 18 days of Paid Time Off * Volunteer Time Off * Holiday Pay * Comprehensive Medical, Dental, and Vision plans * 401(k) Plan with a 4% Company Match * Up to 100% Tuition Reimbursement * Fully equipped, on-site Fitness center & Locker rooms * Paid Maternity & Paternity Leaves * On-demand mental healthcare support * Summer Hours * Full-service Cafeteria * Employee Resource Groups & Activity Clubs * Free & Discounted Chocolate! Our Core Values: * Excellence - At Lindt we have passion for the best and pride in what we do - we aspire for excellence in everything. * Collaboration - At Lindt are in it together, locally and globally with a shared purpose. We invest in our relationships and value each other. * Entrepreneurship - At Lindt we take ownership to drive results and make an impact - we focus on what matters to deliver on our commitments. * Innovation - At Lindt we are always evolving to shape our future. We look for new and better ways to deliver success, adapt to change and build on our strengths. * Responsibility - At Lindt we act responsibly - we treat others with respect, value diversity, and care for the environment to create a sustainable tomorrow. If you are looking to join a winning team and fast-track your career, contact us! Lindt and Sprüngli USA is an equal opportunity employer and considers all qualified applicants regardless of race, age, ethnicity, gender identity, sexual orientation, disability, or veteran status. This is not a comprehensive list of skills and requirements, and the role may change over time. Applicants for this position must successfully pass a background screening. Please contact the Human Resources department for more information. Qualifications: Experience: * 2 -3 years Quality experience in a food production environment Skills & Knowledge * Proficient in MS office Applications * Proficient in JDE or other enterprise system preferred. * Must have solid written and verbal communication skills. * Knowledge of quality food safety and regulatory requirements. * Must be results driven, self-motivated and able to work independently. * Demonstrated commitment to teamwork and internal client service orientation. * Excellent organizational and analytical skills. Education & Certifications: Required * BS degree, preferably in Food science or related field Preferred * Formal training in sanitation / food safety / regulatory

JOB DETAILS Base pay starts at $19 per hour 2nd Shift: Monday-Thursday 3:30 PM - 2:00 AM, Monday - Thursday, overtime as designated DUTIES AND RESPONSIBILITIES The Harvey Quality Assurance Technician III role is responsible for daily checks on key equipment and processes to ensure adherence to documented guidelines. Timely response to problems on the manufacturing floor as well as follow up root cause and corrective actions is critical to positive performance. These problems can vary between process issues with equipment to nonconforming material from vendors ending with detailed and accurate communication of these findings to involved parties. Inspection of manufactured material to company quality standards Training of manufacturing personnel to uphold company quality standards Work in teams to define and implement robust process controls/error proofing solutions that ensure product conforms to specification and performance standards Investigate as an individual nonconforming material, root cause, and present findings to vendors and production lines in a well documented format 80%+ of time spent working independently in a plant manufacturing setting Other duties as required Additional overtime as required with notice, typically limited to Monday-Friday Qualifications Being able to work as needed in a group and individual setting Ability to visually inspect parts and distinguish between conforming and nonconforming parts per guidelines Ability to make decisions by self and support with documentation Effective written and verbal communication skills with team members, departments, and vendors Strong organization skills Ability to multi-task and manage stressful situations Able to prioritize tasks in an efficient manner in order to meet deadlines Ability to perform mathematical calculations as necessary Strong commitment toward quality, safety, and continuous improvement Preferred: Knowledge of Window Quality specifications Preferred: Knowledge of Home Construction Education & Experience Requirements: High School Diploma or General Education Degree (GED). 2 - 5 years Quality OR Manufacturing experience in a non-electronics/non-food setting Experience using Measuring Equipment (Tape Measure Required and Calipers preferred) Basic knowledge in use of inspection equipment and reading technical drawings Basic knowledge of quality systems and tolerances (+/-, passible defects, etc) Strong interest in process improvement and problem solving Strong computer skills (Microsoft Word and Excel) Must be able to read, write, and speak English at an intermediate level Additional Information Site Address: 30 Jacks Bridge Rd., Londonderry, NH 03053 Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play . Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. You can also join one of our Employee Resource Groups which help support our commitment to providing a diverse and inclusive work environment. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. All your information will be kept confidential according to EEO guidelines Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play . Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here . You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here . If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at ************ or [email protected] . If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at ************ or [email protected] . This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

**Collaborate with Innovative 3Mers Around the World** Choosing where to start and grow your career has a major impact on your professional and personal life, so it's equally important you know that the company that you choose to work at, and its leaders, will support and guide you. With a diversity of people, global locations, technologies and products, 3M is a place where you can collaborate with other curious, creative 3Mers. **This position provides an opportunity to transition from other private, public, government or military experience to a 3M career.** **The Impact You'll Make in this Role** As a Quality Technician, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative people around the world. Here, you will make an impact by: + Support product quality, product development, process scale-ups, and production processes by performing standardized, specialized, or complex tests, measurements, and tasks on experimental or standard production. + Activities will focus on the appraisal of raw materials, semi-finished, and finished goods. + Ensures that 3M quality standards and procedures are met and maintained. + Teach plant personnel quality methods and measurement techniques. + Complete daily audits of the manufacturing floor, quantify and report the results. Run precision test equipment and report results. + Other quality related tasks as required. **Your Skills and Expertise** To set you up for success in this role from day one, 3M requires (at a minimum) the following qualifications: + High school diploma/GED or higher (completed and verified prior to start) from an accredited institution + One (1) year combined quality and/or laboratory experience in a private, public, government or military environment + One (1) year experience utilizing Microsoft Office (including Excel) Additional qualifications that could help you succeed even further in this role include: + Associates/Two Year Technical degree or higher from an accredited institution in a private, public, government or military environment + Three (3) years combined quality and/or laboratory experience + Equipment validation experience + Good written and verbal communication skills that include excellent data collection and management + Flexible and responsive to changing priorities; able to multi-task; good organizational skills; attention to detail and compliant behaviors **Work location:** + **On-site Tilton, NH 3rd Shift schedule** **Travel: May include up to 5% domestic/international** **Relocation Assistance: Is not authorized** **Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status).** **Supporting Your Well-being** 3M offers many programs to help you live your best life - both physically and financially. To ensure competitive pay and benefits, 3M regularly benchmarks with other companies that are comparable in size and scope. **Chat with Max** For assistance with searching through our current job openings or for more information about all things 3M, visit Max, our virtual recruiting assistant on 3M.com/careers. Applicable to US Applicants Only:The expected compensation range for this position is $59,409 - $72,611, which includes base pay plus variable incentive pay, if eligible. This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate's relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: **************************************************************** Good Faith Posting Date Range 01/12/2026 To 02/11/2026 Or until filled All US-based 3M full time employees will need to sign an employee agreement as a condition of employment with 3M. This agreement lays out key terms on using 3M Confidential Information and Trade Secrets. It also has provisions discussing conflicts of interest and how inventions are assigned. Employees that are Job Grade 7 or equivalent and above may also have obligations to not compete against 3M or solicit its employees or customers, both during their employment, and for a period after they leave 3M. Learn more about 3M's creative solutions to the world's problems at ********** or on Instagram, Facebook, and LinkedIn @3M. Responsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties. Safety is a core value at 3M. All employees are expected to contribute to a strong Environmental Health and Safety (EHS) culture by following safety policies, identifying hazards, and engaging in continuous improvement. Pay & Benefits Overview: https://**********/3M/en\_US/careers-us/working-at-3m/benefits/ 3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law. **Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly.** **3M Global Terms of Use and Privacy Statement** Carefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at 3M are conditioned on your acceptance and compliance with these terms. Please access the linked document by clicking here (************************************************************************************************* , select the country where you are applying for employment, and review. Before submitting your application, you will be asked to confirm your agreement with the terms. At 3M we apply science in collaborative ways to improve lives daily as our employees connect with customers all around the world. Learn more about 3M's creative solutions to global challenges at ********** or on Twitter @3M or @3MNews. 3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law.

Supports Quality Assurance and Control activities to ensure products and procedures meet all applicable internal and external requirements. Supports the administration and maintenance of quality systems. Provides support for quality projects dictated by the Quality Leadership. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES Supports the administration and maintenance of in-process inspection reports, final inspection reports, and First Article inspection Reports compliant with AS9102 using Discus inspection report software. Maintain calibrated test equipment, ensures equipment is calibrated, validated and maintained properly, maintains the calibration system, prepare test data, and identify areas for improvement. Reads and interprets work instructions and to determine dimensions and tolerances. Reads blueprints or specifications to determine dimensions and tolerances. Collates test data and drafts quality reports. May interpret test results and compare them to the specifications and control limits in place while providing recommendations on the appropriateness of data. Supports QMS activities including but not limited to CAPA, Internal Audits, Document Control, Records Management, etc. Maintain QMS documentation; revise and update documentation, assign training based on documentation changes. May interpret Geometric Dimensioning & Tolerance Strong attention to detail, organization, and documentation skills. May verify specified dimensions of product or raw material using verniers, micrometers, CMM, height gages, comparator, scales or other tools. Assists in other areas in support of product conformity. Demonstrates responsibility and accountability for creating a professional, safe, and clean environment evidenced by: being at work on time to perform assigned duties, following the policies of Granite State Manufacturing, always wearing safety glasses in designated areas, maintaining a neat and orderly work area, and following safety practices to prevent errors. Demonstrates commitment to teamwork by establishing effective relationships and networks with both managers/directors and workers and collaborating with them to accomplish shared purposes and goals. Complies with federal and state laws, regulations, specifications and company standards. Abides by GSM Code of Ethics and Business Conduct standards and strictly observes all U.S. and foreign laws and regulations. Requirements QUALIFICATIONS, SKILLS, AND ABILITIES Two-year certification from college or technical school; or ASQ Certified Quality Technician; or 4 years related experience and/or training; or equivalent combination of education and experience. Experience as an inspector or quality technician. Experience working with quality management systems, should know how to interpret Geometric Dimensioning & Tolerance. Must have the ability to work as a team player in a group or team environment and must be able to work independently without supervision. Comfortable using Microsoft Office (Excel, Word, Outlook, PowerPoint) or similar software. Preference for experience in aerospace, defense, other regulated manufacturing environments; experience working with NAVSEA is highly desirable. BENEFICIAL SKILL OR EXPERIENCE Advanced skills in Word and Excel. Strong technical writing skills: ability to create or update procedures and work instructions. Experience operating and setting up CMM's and Faro arms beneficial but not required. Advanced knowledge of inspection, plating and coating processes, and raw materials a plus. A personal and professional background sufficient to secure Government Security Clearance. AAP/EEO STATEMENT Granite State Manufacturing (GSM) is an affirmative action and equal opportunity employer. GSM does not discriminate on the basis of race, color, religion, sex, gender, gender identity or expression, national origin, citizenship, veteran status, age, physical or mental disability, genetic information, marital status, sexual orientation, or any other consideration made unlawful by applicable federal, state, or local laws in its programs, activities, or employment. Benefits Paid time off Floating holidays Paid holidays 401(k) 401(k) company matching Dental & Vision insurance (Company paid) Employee assistance program Flexible spending account Competitive health insurance Health savings account Life insurance Referral program

DEKA R&D has an immediate opening for a Quality Control Inspector to work in a dynamic Medical Device Research and Development company. This position is a highly visible role with significant and direct impact on the development and success of multiple engineering projects. Responsibilities as a Quality Control Inspector: Interpret Mechanical and Electrical print reading and apply inspection best practices Operate CMM equipment and utilize various measuring tools for inspection of medical device components Communicate effectively and promptly across multiple projects to provide feedback on inspection of parts Inspect various mechanical and electrical components and assemblies through incoming inspection Interpret ASME Y14.5 and GD&T standards throughout the inspection process for compliance and best practices Provide feedback on inspection activities to improve efficient whether individually or in a cross-functional setting To be successful as a Quality Control Inspector, you will need the following qualifications: 3+ years of experience in a regulated industry CMM programming, Metrology and/or CQI certified is a plus Basic GD&T knowledge required, Advanced GD&T knowledge preferred Proficient with mechanical measuring equipment such as micrometers, calipers, optical comparator Ability to operate CMMs following precise instructions Inspection of soldered components and Printed Circuit Board (PCB) assemblies; IPC-A-610 certification preferred Computer skills and knowledge; ability to learn new software (Experience with Jira is a plus) About DEKA: One hour from the beach, Boston, and the mountains, the historic Amoskeag Millyard once housed the largest textile mills in the world. It is now home to DEKA Research & Development, where we are taking the same innovation and cutting-edge technology into the modern age. Behind DEKA's brick walls sits a team of professionals who strive to make a difference every day through thoughtful engineering, design, and manufacturing. Here at DEKA, some of the most innovative and life-changing products of our time are created, and new ideas are always welcome and explored.

Job Description About Company: At EZ-CRETE, we design and manufacture premium precast concrete products that save time, cut labor, and simplify installation. Our innovative approach to design, engineering, and manufacturing supports a wide range of industries, including: Electrical, Lighting & Utility, Building Materials and Renewable Energy & EV Charging. About the Role: The Quality Assurance & Control Associate plays a critical role in ensuring that our products meet the highest standards of quality and compliance within the organization. This position is responsible for implementing and maintaining quality control processes, conducting thorough inspections, and identifying areas for improvement to enhance overall product quality and customer satisfaction. The associate collaborates closely with cross-functional teams including production, engineering, and supply chain to monitor quality metrics and resolve any deviations from established standards. By analyzing data and performing root cause analysis, the role supports continuous improvement initiatives that drive operational excellence. Ultimately, the Quality Assurance & Control Associate helps safeguard the company's reputation by ensuring that all outputs consistently meet regulatory requirements and internal quality benchmarks. Minimum Qualifications: At least 2 years of experience in quality assurance or quality control within a manufacturing or production environment. Strong understanding of quality management systems (QMS) Proficiency in using quality tools such as root cause analysis, statistical process control (SPC), and failure mode and effects analysis (FMEA). Excellent attention to detail and strong analytical skills. Preferred Qualifications: Precast concrete manufacturing experience preferred but not required Certification such as ASQ Certified Quality Auditor (CQA) or Certified Quality Improvement Associate (CQIA). Experience with ISO 9001 or other relevant quality standards implementation and audits. Familiarity with quality management software and data analysis tools. Knowledge of Lean Six Sigma methodologies and continuous improvement techniques. Hands on mechanical or construction skills Responsibilities: Conduct routine and detailed inspections of products and materials to verify compliance with quality standards and specifications. Develop, implement, and maintain quality control procedures and documentation to support regulatory compliance and internal policies. Collaborate with production and engineering teams to identify quality issues, perform root cause analysis, and recommend corrective actions. Monitor quality metrics and generate reports to track performance trends and highlight areas requiring improvement. Participate in internal and external audits, ensuring all quality assurance processes are followed and documented accurately. Assist in training staff on quality standards, procedures, and best practices to promote a culture of quality throughout the organization. Support continuous improvement projects by providing data-driven insights and quality expertise. Skills: The required and preferred skills are applied daily to ensure that quality standards are consistently met and improved upon. Analytical skills enable the associate to interpret inspection data and identify trends or deviations that could impact product quality. Proficiency with quality management systems and tools supports the development and enforcement of effective quality control procedures. Communication skills are essential for collaborating with cross-functional teams and training staff on quality practices. Additionally, knowledge of continuous improvement methodologies helps the associate drive compliance and operational excellence throughout the production lifecycle.

CMM Operator/Programmer, ITAR and DOD Position **non-exempt** Perform mechanical inspections using Zeiss and Brown & Sharpe Coordinate Measuring Machines as well as micrometers, calipers, pin gages, etc. Ability to understand GD&T, read prints and complete inspection reports required. Proficiency in First Article, First Piece and In Process inspections preferred. Soft Skills: Detail oriented, communication, team oriented Experience: CMM (Coordinate Measuring Machine) experience required. Software Proficiency: Excel, Calypso, PC DMIS Education: Minimum HS Diploma Travel: None Hours: 7am - 3:30pm PPE: Steel toed shoes, glasses as required Shortlisting Preference: All Qualified Timeline for Review and Interviews: ASAP Additional Information All your information will be kept confidential according to EEO guidelines.

Were seeking a Quality Mechanical Inspector to perform detailed, accurate mechanical inspections-including FAIs, Gage R&R, OQ, PQ, and IQ-to strict drawing requirements and established quality standards. This role is highly detail-oriented and requires precision, hands-on metrology experience, and the ability to document results clearly. Youll work with CMM (Hexagon PC-DMIS), optical comparator, OGP, and traditional inspection tools (calipers, micrometers, height gages, pin gages, tool mics), and complete visual inspections to established standards. Key Responsibilities Perform dimensional and visual inspections using CMM, optical comparator, calipers, micrometers, height gages, and other metrology tools. Accurately document inspection results per company inspection procedures (e.g., TechNH standards if applicable). Write basic CMM programs to measure parts for FAIs, CPKs, PQs, OQs, and IQs. Conduct FAIs and Gage R&R, as well as PQ, OQ, and IQ inspections. Utilize standardized CMM fixturing based on part geometry. Interpret ballooned customer drawings with a basic understanding of GD&T. Maintain an accurate library of programs and written setup instructions for all CMM and OGP programs. Qualifications Required: Minimum 1 year experience as a mechanical inspector. Minimum 1 year CMM experience; ability to create basic CMM programs (Hexagon PC-DMIS knowledge required). Proficiency with optical comparators, tool mics, pin gages, and related tools. Basic understanding of GD&T measurements. Proficient in Microsoft Excel and MS Office. Ability to read blueprints, inspection reports, and quality documentation. Strong communication skills; ability to work independently with minimal supervision and collaborate with engineers, shift supervisors, and machine technicians. Demonstrated ability to work effectively in a multi-discipline, collaborative environment. Experience in QMS/Regulatory environments. Preferred: Experience writing basic programs for OGP systems. Familiarity with CPK studies and data reporting. Strong presentation and reporting skills. What Youll Bring High attention to detail and a commitment to accuracy. Ability to take direction well and carry out instructions competently. A team-first mindset and clear, professional communication.

Compensation Range: $18.50/h - $25.00/h Dependent on Experience The Quality Tech - Source Inspection is a specialized quality control inspector responsible for preparing castings for shipment. ESSENTIAL DUTIES AND RESPONSIBILITIES Compile data and review casting certifications for part shipment. Perform diversified duties to review orders for source inspection presentation and approval by visiting customer inspection personnel. Receive and process all returned castings. Accumulate purchase orders, inspection records, and all data necessary to review presentation of completed castings. Assist visiting customer inspection personnel; review additional information and perform any extra operations necessary to attain approval. Perform required tasks to package castings for shipment, as necessary. Receive and inspect all returned castings and determine reason for customer rejection. Initiate rework and salvage requirements and review required operation instructions. Initiate rework and salvage requirements and review required operation instructions. Expedite rework to re-ship castings; follow through salvage operations to maintain document control at all times. Review and maintain records including dates, reason for rejection, rework required, and final outcome. Maintain shipping records and files. Detect faulty operations, defective material, and report these and any unusual conditions to proper supervision. SECONDARY DUTIES AND RESPONSIBILITIES Must comply with all applicable safety requirements, policies, and procedures, while maintaining a clean, safe, and orderly work environment. Must report any work-related injury or illness immediately to your direct supervisor. Must participate in required training, medical monitoring, safety and health evaluations and programs. Must wear required Personal Protective Equipment (PPE) in all designated areas of the facility. Perform all physical functions* of position. Meet established attendance standards. Work overtime as needed. Perform other duties as assigned. EDUCATION, EXPERIENCE AND REQUIRED SKILLS High school diploma or GED preferred but not required. Work with various reports, forms, and records where interpretation is required. Accuracy in checking, counting, weighing, and record keeping. May use weigh scale, postage meter, or similar equipment. PHYSICAL REQUIREMENTS While performing the duties of this job, the employee is frequently required to stand, walk, twist, turn, talk, and/or hear. The employee is occasionally required to sit, kneel, stoop, bend, and use hands to finger, handle, or feel. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.

Work Your Magic with us! Start your next chapter and join MilliporeSigma. Ready to explore, break barriers, and discover more? We know you've got big plans - so do we! Our colleagues across the globe love innovating with science and technology to enrich people's lives with our solutions in Healthcare, Life Science, and Electronics. Together, we dream big and are passionate about caring for our rich mix of people, customers, patients, and planet. That's why we are always looking for curious minds that see themselves imagining the unimaginable with us. This role does not offer sponsorship for work authorization. External applicants must be eligible to work in the US. Your Role We are seeking a Master-level Microbiology Lab Quality Control Technician to support full-scale bacterial retention testing for biopharmaceutical membranes and filtration devices. This role plays a critical part in ensuring safety, quality, and productivity through advanced testing operations, troubleshooting of test setups and processes, and expert use of the Laboratory Information Management System (LIMS). The successful candidate will model MilliporeSigma values, ensure strict compliance with SOPs, batch records, and test methods, and serve as a role model and mentor for Environmental Health and Safety (EHS) excellence while actively contributing to site-wide EHS initiatives. This is a D shift position Saturday- Monday 6AM-6PM. Duties include: * Perform troubleshooting and advanced set-ups. * Review, verify, and approve test and process data in the Laboratory Information Management System. * Lead lab sustainability efforts. * Lead technical operations in the lab under minimal supervision. * Fill in for Lead Technician on a temporary basis. * Assignments are complex in nature. * Perform product testing in compliance with SOPs, GMP, and quality and safety specifications * Independently execute required laboratory testing procedures * Set up, operate, and troubleshoot quality lab equipment and advanced test systems * Support complex lab operations, projects, and technical activities with minimal supervision * Accurately complete, review, and approve GMP documentation and LIMS data * Participate in OOS investigations, protocols, qualifications, and validations * Proactively identify and report safety, quality, and productivity concerns; maintain an orderly workspace * Lead technical operations, sustainability initiatives, and temporarily assume Lead Technician responsibilities Physical Attributes * Exposure to machinery, chemical reagents, biological materials at Biosafety Levels 1 and 2, and equipment in a laboratory environment. * 100% Standing and/or sitting for duration of shift, up to 12 hours. * Frequent lifting of 20 - 30 lbs. necessary/Max lifting - 40 to 50 lbs. * Ability to bend and twist as needed. * Must be able to grasp, manipulate and handle objects consistently and regularly, Fine motor skills are required. Who You Are Minimum Qualifications * 4+ years of laboratory or equivalent experience with progressive responsibilities and demonstrated performance. * High school diploma or GED. * 1+ years of experience with Laboratory Information Systems. Preferred Qualifications * Associate's degree in a STEM field. * 2+ years of experience with Laboratory Information Management Systems. * 2+ years Aseptic laboratory experience. * Strong knowledge of EHS, ISO, cGMP, and other laboratory and regulatory requirements. * Demonstrated computer skills, familiarity with Microsoft Office applications. * Reliable and self-motivated. * Read, follow and understand Test Methods, Test Specifications, and other technical documentation. Pay Range for this position: $26 -$40 per hour The offer range represents the anticipated low and high end of the base pay compensation for this position. The actual compensation offered will be determined by factors such as location, level of experience, education, skills, and other job-related factors. Position may be eligible for sales or performance-based bonuses. Benefits offered by the Company include health insurance, paid time off (PTO), retirement contributions, and other perquisites. For more information click here. What we offer: We are curious minds that come from a broad range of backgrounds, perspectives, and life experiences. We believe that this variety drives excellence and innovation, strengthening our ability to lead in science and technology. We are committed to creating access and opportunities for all to develop and grow at your own pace. Join us in building a culture of inclusion and belonging that impacts millions and empowers everyone to work their magic and champion human progress! Apply now and become a part of a team that is dedicated to Sparking Discovery and Elevating Humanity!

Job Description Shea Concrete, New England's Premier Precaster, is currently hiring for a Quality Control (QC) Technician at our year-round plant located in Rochester, MA. This is a year round facility in a fast paced environment. $25-$30/hr based on experience. The Quality Control Technician (“QC Technician”) will work within Shea Concrete's production plant and is ultimately responsible for product testing. The QC Tech will assist in the execution of quality control processes, procedures and protocol associated with the production of pre and post concrete pours. QC Experience required, Precast experience preferred. Come see what we are all about (click on video): ************************************************** Responsibility Responsible for ACI concrete field tests Responsible for quality control inspections in manufacturing plant Inspect forms before pouring (Pre-Pour). Inspect product after removed from forms (Post-Pour) Notifies Production Supervisor if deficiencies are found. Perform and/or schedule repairs on products as needed. Expected to maintain knowledge of precast plant techniques and procedures. May assist with precast production operation as needed. Characteristics Always committed to safety. Maintain a safe work area. Follow safe work practices as outlined in the Safety Program. Always committed to quality. Follow and implement quality control measures. Excellent attendance. Reliable means of transportation to and from work. Ability to learn, organize and prioritize work and handle multiple tasks. Outstanding attitude, honesty, and ethic at all times. Expected to use sound judgment, diplomacy, and discretion. Work independently or cooperatively with others. Self-drive in carrying out the functions of the job. Requirements: ACI Concrete Field-Testing Grade 1 Certified (preferred but not required) NPCA PQS Training (preferred) Must be at least 18 years of age per federal guidelines. Good communication skills, both verbal and written to all levels of staff Ability to remain focused in busy environment. Computers and tablets skills are required in order to perform tasks. Ability to read blueprints and sketches. Physical Demands Ability to stand/bend/stretch/reach/kneel/crawl, etc. Must be able to be on your feet for extended periods of time throughout work shift. Ability to lift and carry 50lbs. Must be able to work with heights up to 10 feet. Must wear proper PPE at all times in a production plant environment

Support raw materials of therapeutic proteins API Support creating liquid, powders, and acid and basis make sure to sample testing of the material Follow GDP and GMP environment Skills pH, Conductivity, sample prep, media prep, autoclaving, Specimen processing, Quality control, biology, Laboratory Top Skills Details pH,Conductivity,sample prep,media prep,autoclaving,Specimen processing Additional Skills & Qualifications Associate's Degree or BS life science 0-2 Experience working in a GMP environment Experience Level Entry Level Job Type & Location This is a Contract position based out of Portsmouth, NH. Pay and Benefits The pay range for this position is $23.25 - $23.25/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Portsmouth,NH. Application Deadline This position is anticipated to close on Jan 26, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

Collaborate with Innovative 3Mers Around the World Choosing where to start and grow your career has a major impact on your professional and personal life, so it's equally important you know that the company that you choose to work at, and its leaders, will support and guide you. With a diversity of people, global locations, technologies and products, 3M is a place where you can collaborate with other curious, creative 3Mers. This position provides an opportunity to transition from other private, public, government or military experience to a 3M career. The Impact You'll Make in this Role As a Quality Technician, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative people around the world. Here, you will make an impact by: Support product quality, product development, process scale-ups, and production processes by performing standardized, specialized, or complex tests, measurements, and tasks on experimental or standard production. Activities will focus on the appraisal of raw materials, semi-finished, and finished goods. Ensures that 3M quality standards and procedures are met and maintained. Teach plant personnel quality methods and measurement techniques. Complete daily audits of the manufacturing floor, quantify and report the results. Run precision test equipment and report results. Other quality related tasks as required. Your Skills and Expertise To set you up for success in this role from day one, 3M requires (at a minimum) the following qualifications: High school diploma/GED or higher (completed and verified prior to start) from an accredited institution One (1) year combined quality and/or laboratory experience in a private, public, government or military environment One (1) year experience utilizing Microsoft Office (including Excel) Additional qualifications that could help you succeed even further in this role include: Associates/Two Year Technical degree or higher from an accredited institution in a private, public, government or military environment Three (3) years combined quality and/or laboratory experience Equipment validation experience Good written and verbal communication skills that include excellent data collection and management Flexible and responsive to changing priorities; able to multi-task; good organizational skills; attention to detail and compliant behaviors Work location: On-site Tilton, NH 3rd Shift schedule Travel: May include up to 5% domestic/international Relocation Assistance: Is not authorized Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status). Supporting Your Well-being 3M offers many programs to help you live your best life - both physically and financially. To ensure competitive pay and benefits, 3M regularly benchmarks with other companies that are comparable in size and scope. Chat with Max For assistance with searching through our current job openings or for more information about all things 3M, visit Max, our virtual recruiting assistant on 3M.com/careers. Applicable to US Applicants Only:The expected compensation range for this position is $59,409 - $72,611, which includes base pay plus variable incentive pay, if eligible. This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate's relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: ******************************************************************* Faith Posting Date Range 01/12/2026 To 02/11/2026 Or until filled All US-based 3M full time employees will need to sign an employee agreement as a condition of employment with 3M. This agreement lays out key terms on using 3M Confidential Information and Trade Secrets. It also has provisions discussing conflicts of interest and how inventions are assigned. Employees that are Job Grade 7 or equivalent and above may also have obligations to not compete against 3M or solicit its employees or customers, both during their employment, and for a period after they leave 3M.Learn more about 3M's creative solutions to the world's problems at ********** or on Instagram, Facebook, and LinkedIn @3M.Responsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties.Safety is a core value at 3M. All employees are expected to contribute to a strong Environmental Health and Safety (EHS) culture by following safety policies, identifying hazards, and engaging in continuous improvement.Pay & Benefits Overview: https://**********/3M/en_US/careers-us/working-at-3m/benefits/3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law. Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly. 3M Global Terms of Use and Privacy Statement Carefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at 3M are conditioned on your acceptance and compliance with these terms. Please access the linked document by clicking here, select the country where you are applying for employment, and review. Before submitting your application, you will be asked to confirm your agreement with the terms.

Job Description Supports Quality Assurance and Control activities to ensure products and procedures meet all applicable internal and external requirements. Supports the administration and maintenance of quality systems. Provides support for quality projects dictated by the Quality Leadership. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES Supports the administration and maintenance of in-process inspection reports, final inspection reports, and First Article inspection Reports compliant with AS9102 using Discus inspection report software. Maintain calibrated test equipment, ensures equipment is calibrated, validated and maintained properly, maintains the calibration system, prepare test data, and identify areas for improvement. Reads and interprets work instructions and to determine dimensions and tolerances. Reads blueprints or specifications to determine dimensions and tolerances. Collates test data and drafts quality reports. May interpret test results and compare them to the specifications and control limits in place while providing recommendations on the appropriateness of data. Supports QMS activities including but not limited to CAPA, Internal Audits, Document Control, Records Management, etc. Maintain QMS documentation; revise and update documentation, assign training based on documentation changes. May interpret Geometric Dimensioning & Tolerance Strong attention to detail, organization, and documentation skills. May verify specified dimensions of product or raw material using verniers, micrometers, CMM, height gages, comparator, scales or other tools. Assists in other areas in support of product conformity. Demonstrates responsibility and accountability for creating a professional, safe, and clean environment evidenced by: being at work on time to perform assigned duties, following the policies of Granite State Manufacturing, always wearing safety glasses in designated areas, maintaining a neat and orderly work area, and following safety practices to prevent errors. Demonstrates commitment to teamwork by establishing effective relationships and networks with both managers/directors and workers and collaborating with them to accomplish shared purposes and goals. Complies with federal and state laws, regulations, specifications and company standards. Abides by GSM Code of Ethics and Business Conduct standards and strictly observes all U.S. and foreign laws and regulations. Requirements QUALIFICATIONS, SKILLS, AND ABILITIES Two-year certification from college or technical school; or ASQ Certified Quality Technician; or 4 years related experience and/or training; or equivalent combination of education and experience. Experience as an inspector or quality technician. Experience working with quality management systems, should know how to interpret Geometric Dimensioning & Tolerance. Must have the ability to work as a team player in a group or team environment and must be able to work independently without supervision. Comfortable using Microsoft Office (Excel, Word, Outlook, PowerPoint) or similar software. Preference for experience in aerospace, defense, other regulated manufacturing environments; experience working with NAVSEA is highly desirable. BENEFICIAL SKILL OR EXPERIENCE Advanced skills in Word and Excel. Strong technical writing skills: ability to create or update procedures and work instructions. Experience operating and setting up CMM's and Faro arms beneficial but not required. Advanced knowledge of inspection, plating and coating processes, and raw materials a plus. A personal and professional background sufficient to secure Government Security Clearance. AAP/EEO STATEMENT Granite State Manufacturing (GSM) is an affirmative action and equal opportunity employer. GSM does not discriminate on the basis of race, color, religion, sex, gender, gender identity or expression, national origin, citizenship, veteran status, age, physical or mental disability, genetic information, marital status, sexual orientation, or any other consideration made unlawful by applicable federal, state, or local laws in its programs, activities, or employment. Benefits Paid time off Floating holidays Paid holidays 401(k) 401(k) company matching Dental & Vision insurance (Company paid) Employee assistance program Flexible spending account Competitive health insurance Health savings account Life insurance Referral program

CMM Operator/Programmer, ITAR and DOD Position **non-exempt** Perform mechanical inspections using Zeiss and Brown & Sharpe Coordinate Measuring Machines as well as micrometers, calipers, pin gages, etc. Ability to understand GD&T, read prints and complete inspection reports required. Proficiency in First Article, First Piece and In Process inspections preferred. Soft Skills: Detail oriented, communication, team oriented Experience: CMM (Coordinate Measuring Machine) experience required. Software Proficiency: Excel, Calypso, PC DMIS Education: Minimum HS Diploma Travel: None Hours: 7am - 3:30pm PPE: Steel toed shoes, glasses as required Shortlisting Preference: All Qualified Timeline for Review and Interviews: ASAP Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description Were seeking a Quality Mechanical Inspector to perform detailed, accurate mechanical inspections-including FAIs, Gage R&R, OQ, PQ, and IQ-to strict drawing requirements and established quality standards. This role is highly detail-oriented and requires precision, hands-on metrology experience, and the ability to document results clearly. Youll work with CMM (Hexagon PC-DMIS), optical comparator, OGP, and traditional inspection tools (calipers, micrometers, height gages, pin gages, tool mics), and complete visual inspections to established standards. Key Responsibilities Perform dimensional and visual inspections using CMM, optical comparator, calipers, micrometers, height gages, and other metrology tools. Accurately document inspection results per company inspection procedures (e.g., TechNH standards if applicable). Write basic CMM programs to measure parts for FAIs, CPKs, PQs, OQs, and IQs. Conduct FAIs and Gage R&R, as well as PQ, OQ, and IQ inspections. Utilize standardized CMM fixturing based on part geometry. Interpret ballooned customer drawings with a basic understanding of GD&T. Maintain an accurate library of programs and written setup instructions for all CMM and OGP programs. Qualifications Required: Minimum 1 year experience as a mechanical inspector. Minimum 1 year CMM experience; ability to create basic CMM programs (Hexagon PC-DMIS knowledge required). Proficiency with optical comparators, tool mics, pin gages, and related tools. Basic understanding of GD&T measurements. Proficient in Microsoft Excel and MS Office. Ability to read blueprints, inspection reports, and quality documentation. Strong communication skills; ability to work independently with minimal supervision and collaborate with engineers, shift supervisors, and machine technicians. Demonstrated ability to work effectively in a multi-discipline, collaborative environment. Experience in QMS/Regulatory environments. Preferred: Experience writing basic programs for OGP systems. Familiarity with CPK studies and data reporting. Strong presentation and reporting skills. What Youll Bring High attention to detail and a commitment to accuracy. Ability to take direction well and carry out instructions competently. A team-first mindset and clear, professional communication.

Work Your Magic with us! Start your next chapter and join MilliporeSigma. Ready to explore, break barriers, and discover more? We know you've got big plans - so do we! Our colleagues across the globe love innovating with science and technology to enrich people's lives with our solutions in Healthcare, Life Science, and Electronics. Together, we dream big and are passionate about caring for our rich mix of people, customers, patients, and planet. That's why we are always looking for curious minds that see themselves imagining the unimaginable with us. This role does not offer sponsorship for work authorization. External applicants must be eligible to work in the US. Your Role We are seeking an Intermediate Physical Test Lab Quality Control Technician to support the full operation of testing biopharmaceutical filtration devices. This role focuses on maintaining the highest standards of safety, quality, and productivity while performing routine and intermediate-level testing activities. The technician will assist with test process setup, perform basic troubleshooting to ensure smooth operations, and utilize Laboratory Information Management Systems (LIMS) to support accurate data tracking and reporting. Duties Include: * Safely perform product testing in compliance with SOPs, GMP, and quality and safety standards. * Set up, operate, and monitor laboratory test equipment, including pressurized vessels, steam systems, and test stands. * Complete accurate paper and electronic documentation in accordance with GMP requirements. * Perform basic troubleshooting, equipment set-ups, and support test execution under close supervision. * Review, verify, and accurately enter test and process data into the Laboratory Information Management System (LIMS). * Support laboratory operations, projects, protocols, qualifications, and validation activities alongside senior technicians. * Participate in Out-of-Specification (OOS) investigations and proactively identify safety, quality, and productivity concerns. * Maintain a clean, organized workspace and contribute to sustainability and continuous improvement efforts. Physical Attributes * Exposure to machinery and equipment, chemical reagents, biological materials at Biosafety Levels 1 and 2, in a laboratory environment. * 100% Standing and/or sitting for duration of shift, up to 12 hours. * Frequent lifting of 20 - 30 lbs. necessary/Max lifting - 40 to 50 lbs. * Bend and twist as needed. * Grasp, manipulate and handle objects consistently and regularly, Fine motor skills are required. Who You Are Minimum Qualifications * 1+ years of laboratory or cGMP manufacturing experience. * High school diploma or GED. Preferred Qualifications * Associate's degree in any discipline. * 2+ years of laboratory or cGMP manufacturing experience. * Basic knowledge of EHS, ISO, cGMP, and other manufacturing regulatory requirements. * Basic computer skills, familiarity with Microsoft Office applications. * Reliable and self-motivated. * Read, follow and understand operating procedures and documentation. Pay Range for this position: $19 -$30 per hour The offer range represents the anticipated low and high end of the base pay compensation for this position. The actual compensation offered will be determined by factors such as location, level of experience, education, skills, and other job-related factors. Position may be eligible for sales or performance-based bonuses. Benefits offered by the Company include health insurance, paid time off (PTO), retirement contributions, and other perquisites. For more information click here. What we offer: We are curious minds that come from a broad range of backgrounds, perspectives, and life experiences. We believe that this variety drives excellence and innovation, strengthening our ability to lead in science and technology. We are committed to creating access and opportunities for all to develop and grow at your own pace. Join us in building a culture of inclusion and belonging that impacts millions and empowers everyone to work their magic and champion human progress! Apply now and become a part of a team that is dedicated to Sparking Discovery and Elevating Humanity!

Supports Quality Assurance and Control activities to ensure products and procedures meet all applicable internal and external requirements. Supports the administration and maintenance of quality systems. Provides support for quality projects dictated by the Quality Leadership. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES * Supports the administration and maintenance of in-process inspection reports, final inspection reports, and First Article inspection Reports compliant with AS9102 using Discus inspection report software. * Maintain calibrated test equipment, ensures equipment is calibrated, validated and maintained properly, maintains the calibration system, prepare test data, and identify areas for improvement. * Reads and interprets work instructions and to determine dimensions and tolerances. * Reads blueprints or specifications to determine dimensions and tolerances. * Collates test data and drafts quality reports. * May interpret test results and compare them to the specifications and control limits in place while providing recommendations on the appropriateness of data. * Supports QMS activities including but not limited to CAPA, Internal Audits, Document Control, Records Management, etc. * Maintain QMS documentation; revise and update documentation, assign training based on documentation changes. * May interpret Geometric Dimensioning & Tolerance * Strong attention to detail, organization, and documentation skills. * May verify specified dimensions of product or raw material using verniers, micrometers, CMM, height gages, comparator, scales or other tools. * Assists in other areas in support of product conformity. * Demonstrates responsibility and accountability for creating a professional, safe, and clean environment evidenced by: being at work on time to perform assigned duties, following the policies of Granite State Manufacturing, always wearing safety glasses in designated areas, maintaining a neat and orderly work area, and following safety practices to prevent errors. * Demonstrates commitment to teamwork by establishing effective relationships and networks with both managers/directors and workers and collaborating with them to accomplish shared purposes and goals. * Complies with federal and state laws, regulations, specifications and company standards. * Abides by GSM Code of Ethics and Business Conduct standards and strictly observes all U.S. and foreign laws and regulations.