Quality assurance technician jobs in South Gate, CA - 777 jobs

Job Title: Bilingual Lab TechnicianJob Description We are seeking a dedicated and bilingual Lab Technician who is passionate about women's health. This role involves working in a dynamic environment where you will gain hands-on experience in both front and back office operations. This is an excellent opportunity for entry-level candidates who are sharp, driven, and eager to start a career in the medical field. Responsibilities Conduct insurance verification and manage necessary documentation. Handle referrals efficiently and accurately. Utilize lab instrumentation and ensure sterilization procedures are followed. Work with Athena EMR and Nextgen systems for patient management. Essential Skills Proficiency in Athena EMR. Fluency in Spanish, with the ability to read, write, and speak. Strong administrative skills. Experience with lab instrumentation and sterilization. Additional Skills & Qualifications * Experience working in a fast-paced, high-volume environment. * Ability to communicate effectively with Spanish-speaking patients. Work Environment The work environment is fast-paced and high-volume, with many patients speaking Spanish. Flexibility is required to work at either the Van Nuys or Plaza locations. This role provides an excellent opportunity to learn valuable skills in the healthcare field. Job Type & Location This is a Contract to Hire position based out of Los Angeles, CA. Pay and Benefits The pay range for this position is $21.00 - $21.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Los Angeles,CA. Application Deadline This position is anticipated to close on Jan 30, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

The **Quality Technician III** supports the Quality Engineering group through processing First Article Inspection (FAI) and Part Approval Process, selective inspection, analysis and processing of internal Nonconformance Reporting (NC) material and other administrative and logistical support duties. Represents the Quality Department in witnessing and documenting UAV flight acceptance test activity. **Position Responsibilities** + Processes inbound or outbound FAI and deliverable submissions accurately and timely including: receipt and analysis of parts and/or supporting documentation; completion of associated records and logs; communication of submission status as needed to QEs, managers, engineers or interested parties; processing of parts after completion; maintaining records and files associated with submissions; and other related tasks + Conducts selective inspection under the direction of the QE group including: receipt and verification of material, completion and maintenance of related documentation, communication of inspection results to concerned parties and processing of material after verification using Agile/Oracle database + Processes internal non-conforming material as needed in support of QE including: retrieval and analysis of material, interpretation of preliminary findings and restatement of problem statements to ensure understanding of problem, processing material through the necessary NC processes, communication of status to concerned parties, maintaining necessary documentation and processing material to internal and external suppliers + Provides general support of QEs including communication, Corrective Action Request processing, product evaluation, and sorting activities under exceptional circumstances, and interfacing with other team members as necessary to complete assigned tasks in support of continuous improvement initiatives using A3, Six Sigma DMAIC forms + Leads & facilitates problem solving activities such as Fishbone, 5-Why, Fault-tree, etc. Plans and coordinates QA Technician I and II activities and provides general guidance + Support DCMA Source Inspection process + Responsible for creating the Final Inspection documentation package including COC, TDR's, etc., and as necessary support internal/external customer inspection + Represents and supports QEs during internal and 3rd party audits regarding the essential functions above and as needed regarding our measurements system and documented system + Develops and maintains process instructions for quality-related activities + Works on assignments that are moderately difficult, requiring judgement in resolving issues or in making recommendations + Other duties as assigned **Basic Qualifications (Required Skills & Experience)** + High School Diploma or GED equivalent + 2 - 4 years of related work experience is required or equivalent combination of education, training, and experience + Has Aerospace quality management system experience (AS9100DD) and/or internal audit experience + Demonstrated expertise in mechanical inspection methods and skills including surface plate work, hand tools, and gages, etc. + Solid ability to read and understand drawing requirements including a solid understanding of Geometric Dimensioning and Tolerance to ANSI Y14.5 + Strong computer skills and is proficient in MS Office Suite (Word, Access, PowerPoint, Excel) + Must be able to fill out the necessary flight test documentation + Must document any/all non-conformances encountered + Must have the skills necessary to perform pre and post-flight visual inspections on flight hardware and components + Must possess the skills necessary to remove and replace field replaceable components on aircraft. Will populate excel spreadsheets on a daily basis documenting flight test results + Must have a valid California driver's license and clean driving record **Other Qualifications & Desired Competencies** + 2-year technical degree preferred; Quality system courses and/or equivalent experience preferred + Must able to work efficiently in a fast-paced, high-volume environment + Required to travel to and from remote flying sites on a daily basis + Solid ability to accurately record and manage data, records, files and other documents to support tasks + Good knowledge of FAI validation and verification process requirements + Good knowledge of engineering drawings and specification systems + Has an analytical approach to problem solving and high organizational skills in a fast-paced environment as well as effective time management, interpersonal and communication skills + Strong ability to manage time and prioritize tasks + Receives little instruction on daily work, general instructions on newly introduced assignments. Has substantial understanding of the job and applies knowledge & skills to complete wide range of tasks + Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties + Displays strong initiative and drive to accomplish goals and meet company objectives + Takes ownership and responsibility for current and past work products + Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company + Has effective problem-solving, analytical, interpersonal and communication skills. Focuses on teamwork, collaboration and puts the success of the team above one's own interests + Willingness to work overtime also a must **Physical Demands** + Ability to work the majority of the time outdoors in varying weather conditions, when needed, during flight test activity (Frequent) + Ability to lift up to 50 lbs. and carry/move objects of varying shapes and sizes (Frequent) + Regularly required to, stand, sit; talk, hear, and use hands and fingers to operate a computer and telephone keyboard (Frequent) **Clearance Level** Clearance Level The salary range for this role is: $26 - $37 AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. **ITAR Requirement:** _T_ _his position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A "U.S. person" according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements._ **Benefits** : AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************* . We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. **Who We Are** Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. **What We Do** Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. _We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status._ **ITAR** U.S. Citizen, U.S. Permanent Resident (Green Card holder), asylee/refugee status as defined by 8 U.S.C. 1324b(a)(3) or a person approved for an export license from the appropriate governing agency. **About AV:** **AV isn't for everyone. We hire the curious, the relentless, the mission-obsessed. The best of the best.** We don't just build defense technology-we redefine what's possible. As the premier autonomous systems company in the U.S., AV delivers breakthrough capabilities across air, land, sea, space, and cyber. From AI-powered drones and loitering munitions to integrated autonomy and space resilience, our technologies shape the future of warfare and protect those who serve. Founded by legendary innovator Dr. Paul MacCready, AV has spent over 50 years pushing the boundaries of what unmanned systems can do. Our heritage includes seven platforms in the Smithsonian-but we're not building history, we're building what's next. **If you're ready to build technology that matters-with speed, scale, and purpose-there's no better place to do it than AV.** **Careers at AeroVironment (*****************************************

Energy: Forget about blending in. That's not our style. We're the risk-takers, the trailblazers, the game-changers. We're not perfect, and we don't pretend to be. We're raw, unfiltered, and a bit unconventional. But our drive is unrivaled, just like our athletes. The power is in your hands to define what success looks like and where you want to take your career. It's not just about what we do, but about who we become along the way. We are much more than a brand here. We are a way of life, a mindset. Join us. A day in the life: The Quality Control Technician I will assist in the day to day tasks in Analytical Lab, processing the given examples and load them on analytical equipment such as High Performance Liquid Chromatography. The impact you'll make: Preparation of samples and loading samples into LC units to acquire data. Prepares general solvent bottles to perform the essential lab analysis Monitoring storage and availability of high usage consumables Clean and organize the lab daily Compiles with company policies and GLP Must have a keen eye for detail and willingness to step in and assist colleagues with urgent tasks to meet shared objectives Collaborate effectively with cross-functional teams Who you are: Associates degree or higher with some lab skills Minimum of 1 year in a lab environment or related fields Between 3-5 years of experience in a beverage manufacturing laboratory preferred. Computer operating skills and Microsoft Office Suite experience, Excel, and willingness to learn Smartsheet and SAP platform. Monster Energy provides a competitive total compensation. This position has an estimated hourly rate of $19.00 - $21.00/hour. The actual pay may vary depending on your skills, qualifications, experience, and work location.

About Harbinger Harbinger is an American commercial electric vehicle (EV) company on a mission to transform an industry starving for innovation. Harbinger's best-in-class team of EV, battery, and drivetrain experts have pooled their deep experience to bring a first-of-its-kind EV platform to support the growing demand for medium-duty EVs and Hybrids. Harbinger: Familiar Form, Revolutionary Foundation. Job Overview: As a Metrology Quality Technician, you will play a crucial role in ensuring the quality and reliability of our EV platform. You will be responsible for conducting thorough inspections, implementing quality control measures, and collaborating with cross-functional teams to maintain and improve our production standards. You may also be required to maintain calibrated test equipment, prepare test data, and identify areas for quality control improvement. What You'll Do: Develop and implement new programs on PC-DMIS or Polyworks, and Romer Arm to accurately measure parts in accordance with drawing specifications. Collaborate closely with Quality Engineers to strategize and design programs to meet our production requirements. Conduct dimensional inspections on parts and assemblies using portable CMM and precision gauges such as micrometers, calipers, and height gauges. Perform visual inspections of products in line with established procedures. Execute first piece inspections and monitor quality throughout the production process. Support the production and supplier quality teams with PPAP projects to ensure compliance and quality standards. Advocate for safety in all aspects of your work. Who You Are: Have a strong background in using precision measuring tools and equipment. Skilled at reading and understanding engineering drawings, standards, and procedures. Experienced in programming and operating Portable CMMs. Able to read and interpret drawings and specifications according to ASME Y 14.5 standards. Practical experience in conducting both in-process and final inspections. Familiar with a variety of mechanical inspection tools like micrometers and calipers. Committed to maintaining accuracy and attention to detail while completing tasks efficiently. Knowledgeable about dimensional, visual, and mechanical inspection processes. Comfortable using Google Sheets and Docs for reporting. Capable of working independently and making smart decisions based on general guidance. Enjoy collaborating with team members to achieve common goals. Minimum Qualifications: High school diploma or GED. Minimum 3 years of experience programming/operating CMMs and performing inspections using hand gauges. PC-DMIS/Polyworks training certificate is a plus. California Pay Range $30 - $40 USD Equal Opportunity Harbinger is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law. Harbinger is committed to ensuring that our hiring process is accessible for persons with disabilities. If you have a disability or limitation, such as those covered by the Americans with Disabilities Act, that requires accommodations to assist you in the search and application process, please email us at ************************. Candidate Data Privacy Harbinger may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in our recruitment processes (“Candidate Personal Data”). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Harbinger may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Harbinger may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our HR, legal, and finance teams, and the team(s) with the position(s) for which you are applying; (ii) Harbinger affiliates; and (iii) Harbinger's service providers, including providers of background checks, staffing services, and cloud services. Harbinger may transfer or store internationally your Candidate Personal Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Please note that we are currently not accepting applications from third party application services. Any unsolicited resumes or candidate profiles submitted in response to our job posting shall be considered the property of Harbinger and are not subject to payment of referral or placement fees if any such candidate is later hired by Harbinger unless you have a signed written agreement in place with us which covers the applicable job posting.

Job DescriptionDescription: Under the direction of the NA Quality Team, the Quality Technician is responsible for supporting Inspection and rework of products sold by Johnson Health Tech North America. Duties will include working directly with operations teams to improve quality, supporting the documentation and tracking of defects, and coordinating rework efforts to fix issues as soon as possible in accordance with company policies and procedures. Responsibilities Inspection •First Piece inspection of new SKU's •Targeted Inspection of inventory based on issues found •Inbound, assembly, and outbound quality Rework •Rework finished goods in advance of assembly •Coordinate and train temp labor to assist in rework Training •Face-to-face interaction with the assembly team daily •Research proper assembly procedures and provide assembly instructions •Report defects and train the assembly team on entering defects into tracking system •Lead/Participate in continuous improvement projects Requirements: Education: •High school diploma required •Associate degree in technical field preferred •Additional training and/or certifications in quality systems preferred Experience: •Assembly experience preferred •Past experience in an inspection or repair service role preferred Other Requirements: •Proficiency in Office 365 products •SAP experience preferred •Forklift certification •Familiarity with measuring instruments. Examples include: VOM calipers, tension gauges, etc. •Valid drivers license is required •Ability and willingness to travel both domestically and internationally Benefits: We offer an excellent compensation package and team-oriented work environment with growth opportunities. Some of our outstanding benefits include: · Health & Dental Insurance · Company paid Life Insurance · 401(k) · Paid Time Off benefits · Product discounts · Wellness programs EOE/M/W/Vet/Disability #ZR

Fresh-Squeezed Legacy, Bold New Chapter Tropicana Brands Group is a $3B startup aiming to revolutionize the beverage category. Formed in 2022 as a joint venture between PAI Partners and PepsiCo, our portfolio includes iconic brands like Tropicana, Naked, KeVita, Izze, Copella, and Punica. With over 76 years of global leadership in the orange juice category, we're committed to preserving this legacy while driving innovation in other areas. From reimagining orange juice to creating functional smoothies and driving afternoon refreshments, we are striving to become the undisputed global leader in fresh and chilled beverages. Your Next Pour: The Opportunity Tropicana Brands Group is looking for a Lab Technician to support our Quality team. This role will be responsible for microbiological reading and plating, finish goods, raw materials, culture swabs, ect. and perform laboratory solution and media preparation. Additional responsibilities will include: * Perform analytical testing of ingredients and products. * Process and analyze paperwork for QC functions. * Plant water micro management * Low acid environmental (Listeria) program (EMP) * Allergen testing program * Micro database management * Pathogen Monitoring Program * Coordinate QTG analytical cross check program * Manage QTC/SILIKER microbiological efficiency test program * Manage raw material micro testing program * Microbiological conformance to GTG specification (Finish goods sample frequency, culture swab / ATP swab at pre-operational post CIP * Train Techs on new procedure, create SOP, one point lesson, or flow chart, QC form * Support QA management during audit (QSA, AIB) * Perform incoming inspections of carriers, ingredients and packaging materials. * Analyze and document analysis of materials used in manufacturing. * Monitor, analyze and document in-process conditions, materials and products. * Collect samples for microbiology testing of ingredients, products and packaging materials. * Audit and check production, processing and paperwork items utilizing a QC checklist. * Perform water sample collection and analysis for analytical results. * Collect samples for environmental microbiology monitoring of manufacturing areas. * Perform GMP audits and monitor GMP conditions. * Assist in complaint investigations where necessary. * Monitor and perform lab equipment calibrations. * Perform data entry. * Performs or assists with additional assignments as directed by QC Management. Requirements: * Associate Degree in Science, Food Science, Biology or Microbiology with previous experience in the Quality or Microbiology Department of a food/beverage manufacturing facility, OR high school diploma with at least 3-4 years of experience in a microbiology laboratory * Mathematical aptitude and analytical skills * Computer literacy with Windows, Microsoft office application and other lab software * Must have the ability to read, write and speak in one-on-one and group settings to communicate complex topics, information and specifications related to food manufacturing, food quality and food regulations * Must be located in City of Industry, CA surrounding area or willing to relocate for the duration of employment. * Willingness to be onsite at the manufacturing facility on a full-time basis * Must be able to perform physical tasks for the duration of the shift, including standing, walking, bending, reaching, and lifting/moving items weighing 50 pounds or more. * Must be legally authorized to work in the United States without the need for employer sponsorship now or in the future Benefits: TBG is pleased to offer you a comprehensive benefits package which includes medical, dental, vision, company provided life, STD and LTD insurance. In addition, you may also elect to participate in voluntary life, accident, hospital, and critical illness coverages. Pay for this position is $28.85 a hour.

Eleven Recruiting is searching for three Quality Technicians for one of our largest aerospace manufacturing clients sitting onsite in Simi Valley, CA. This role will play a pivotal role in ensuring adherence to quality standards and specifications of incoming products, materials, and components. Responsible for conducting thorough examinations, quality control inspections, and providing detailed analysis to support Supplier Quality Engineering functions. This position supports the Material Review Board (MRB) processes and collaborates closely with Supplier Quality Engineers to uphold superior quality across all stages of the production process. Job Responsibilities: Conduct comprehensive examinations and quality control inspections on non-conforming products, materials, and components for both standard and specialized products, ensuring alignment with established quality standards. Provide in-depth analysis, troubleshooting, and evaluation of components and assemblies, generating quality notifications for the Material Review Board (MRB) as necessary. Maintain meticulous documentation records and data related to performed tests, ensuring accuracy and accessibility. Collaborate with Supplier Quality Engineers to review quality notifications, determine the issuance of supplier corrective actions, and contribute to continuous improvement initiatives. Support Supplier Quality Engineers in conducting supplier audits to assess and enhance supplier quality performance. Update, refine, and create work inspections and supplier quality to ensure compliance with evolving standards and best practices. Perform other duties as assigned to support the smooth functioning of supplier quality operations. Job Requirements: Education: High School Diploma Certifications: AS9100 Lead Auditor - preferred Experience: 4+ years of hands-on experience in quality control inspections and related functions within a manufacturing or similar environment. Skills: Proficiency in conducting examinations and quality control inspections across various types of products, materials, and components. Able to apply a systematic QA approach while using existing procedures to solve a range of technical issues Performs routine quality inspections on engineering designs, assemblies, piece parts, final assemblies and tooling Conducts Internal audits and corrective action follow-ups Experience interpreting blueprints, drawings, and parts lists to ensure compliance with specifications. Proficient computer skills for documentation, data management, and report generation. #LI-BP1 #LI-Onsite Seniority Level: Mid-level Salary: $60,000-75,000 Job Function: Quality Technician Industry: Aerospace Manufacturing Employment Type: Full-Time Location: Simi Valley, CA

Under the direction of the NA Quality Team, the Quality Technician is responsible for supporting Inspection and rework of products sold by Johnson Health Tech North America. Duties will include working directly with operations teams to improve quality, supporting the documentation and tracking of defects, and coordinating rework efforts to fix issues as soon as possible in accordance with company policies and procedures. Responsibilities Inspection • First Piece inspection of new SKU's • Targeted Inspection of inventory based on issues found • Inbound, assembly, and outbound quality Rework • Rework finished goods in advance of assembly • Coordinate and train temp labor to assist in rework Training • Face-to-face interaction with the assembly team daily • Research proper assembly procedures and provide assembly instructions • Report defects and train the assembly team on entering defects into tracking system • Lead/Participate in continuous improvement projects Requirements Education: • High school diploma required • Associate degree in technical field preferred • Additional training and/or certifications in quality systems preferred Experience: • Assembly experience preferred • Past experience in an inspection or repair service role preferred Other Requirements: • Proficiency in Office 365 products • SAP experience preferred • Forklift certification • Familiarity with measuring instruments. Examples include: VOM calipers, tension gauges, etc. • Valid drivers license is required • Ability and willingness to travel both domestically and internationally Benefits: We offer an excellent compensation package and team-oriented work environment with growth opportunities. Some of our outstanding benefits include: · Health & Dental Insurance · Company paid Life Insurance · 401(k) · Paid Time Off benefits · Product discounts · Wellness programs EOE/M/W/Vet/Disability #ZR Salary Description $25.00 per hour

Job Description The Quality Engineer Associate supports the Quality team in achieving Summit's goal of Perfect Quality by assisting in the monitoring, documentation, and improvement of quality systems and processes. This role works closely with operations, manufacturing, and engineering teams to ensure products meet internal and customer expectations, as well as IPC standards for printed circuit boards. Ideal for a candidate beginning their career in quality engineering or manufacturing, this position offers the opportunity to develop hands-on skills in quality systems, inspection, data analysis, and continuous improvement within a high-tech manufacturing environment. The goal is to develop into a full Quality Engineer. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactory. The requirements listed below are representative of the knowledge, skill and/or ability required. Required Skills: Responsibilities: In-Process Quality Support Learn and conduct in-process inspections, quality checks, and test data collection Maintain accurate documentation for quality records, logs, and forms Support the calibration system and assist with calibration tracking Help monitor process performance using basic data collection and analysis tools Participate in internal audits and prepare data or records as needed Documentation and Reporting Assist in maintaining document control procedures Support the generation of quality reports, charts, and metrics Help track nonconforming material and participate in root cause analysis Input and track Corrective Action Requests (CARs) and Supplier CARs (SCARs) Process Improvement Support Quality Engineers in continuous improvement activities Help identify opportunities for reducing defects and improving yields through performing data analysis and area assessments. Assist with implementation and monitoring of statistical process control (SPC) where needed Customer and Supplier Support Support customer quality surveys, tours, or audits as needed Assist with returned material analysis and simple failure analysis tasks Coordinate with outside test or lab services to support inspection processes 2. Goals Continuously provide assessments and work collaboratively to support improved process controls and yields. Develop measurement parameters to track progress. Work both individually and as part of a cross-functional team to support timely customer deliverables and inquiries. Education/Experience: Required: Associate's or Bachelor's degree in Engineering, Industrial Technology, or related field - or equivalent experience in a manufacturing/quality environment Basic understanding of quality principles and manufacturing processes Proficient in Microsoft Excel, Word, and PowerPoint Strong attention to detail and organizational skills Willingness to learn technical standards (e.g., IPC) and quality systems Interest in working in a hands-on capacity with tools in the laboratory and manufacturing areas, as well as, in performing data analysis. Ability to communicate clearly and work collaboratively across departments Preferred: Prior internship or experience in a quality, manufacturing, or engineering role Familiarity with inspection tools (calipers, micrometers, gauges, etc.) Exposure to ISO 9001 or similar quality management systems Understanding of SPC, basic statistics, or root cause analysis tools (5 Whys, Ishikawa) Physical Demands: Employee may lift and/or move up to 25 lbs as required to perform duties. Excellent concentration and must be able to remain focused in a dynamic fast-paced environment. ITAR Compliance Notice This position requires compliance with the International Traffic in Arms Regulations (ITAR). Under ITAR, candidates must be a U.S. citizen, U.S. lawful permanent resident (e.g., "Green Card" holder), asylee, or refugee as defined by 8 U.S.C. 1324b(a)(3). Applicants who do not meet this requirement may not be eligible for employment in this position. Summit Interconnect is an Equal Opportunity Employer We are committed to fostering an inclusive and diverse workplace where everyone is valued and respected. We provide equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status, or any other legally protected characteristic

RxSight is an ophthalmic medical technology corporation headquartered in Aliso Viejo, California that has commercialized the world's first and only adjustable intraocular lens (IOL) that is customized after cataract surgery. The company's mission is to revolutionize the premium cataract surgery experience by allowing surgeons to partner with their patients to achieve optimized results for every unique eye. OVERVIEW: Performs quality functions to support IS013485, FDA, CGMP, Quality System Regulations, management reporting, LAL production/QA/QC, chemistry QA/QC, product release, in-process inspection, incoming inspection, quality process improvements for LDD, manufacturing transfer, and facility support. ESSENTIAL DUTIES AND RESPONSIBILITIES: Read, comprehend, and follow documents related to manufacturing, inspection and quality systems for audits, compliance, and implementation. Audit and approve production records. Verify production process via auditing/observation and testing. Inspect process output and product parameters against specifications. Ensure routine compliance with process steps and proper documentation of records. Maintain raw material lot information, monitor expiration date, and quarantine inventory when materials are expired. Performs incoming inspection on raw materials and incoming sub-assemblies/finished goods. Collect data for process, quality system, manufacturing quality and performance metrics and generate reports for management review. Identify non-conformances, deviations, non-compliance, lack of calibration etc. and propose corrective actions to management. Facilitate Manufacturing Review Board and supports non-conformance decision process. Govern and transact materials physically and through electronic system. Monitors laboratory and engineering equipment to ensure compliance with preventive maintenance and calibration programs. Performs laboratory notebook audits, inventory audits, and maintains QA retains. Take initiatives for the process improvements changes as related to manufactured components and finished products for LAL. Responsible for assisting the Quality Assurance team with any ad hoc reports and assignments as required. Perform incoming inspection and lot control activities of materials and parts. Assist Quality, Manufacturing and R&D groups in running validation, verification, and developmental studies, and defining processes. Development of inspection techniques and transfer to production and everyday use. Monitor gowning and cleanroom logbook check per SOP to ensure all section of the cleaning log has been filled accurately and completely. Provide Good Manufacturing Practices (GMP) and Quality Standard Operating Procedures (SOP) training to relevant department. Create and review First Article Inspection Reports when necessary. Requirements REQUIRED KNOWLEDGE, SKILLS, AND ABILITIES: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Prior experience of working in cleanroom environment and/ or medical device manufacturing is highly preferred. Professional, responsible, energetic, and accountable. Excellent communication skills. Intellectually curious and eager to learn. Individual must be Quality oriented and possess a natural ability to pay attention to details. EDUCATION, EXPERIENCE, and TRAINING: Associate degree (A.A.) or equivalent from a two-year college or technical school; six months to one-year related experience and/or training; or equivalent combination of education and experience. Experience within a medical device company or regulated industry preferred. Microsoft Word; Microsoft Excel Training to be completed per the training plan for this position as maintained in the document control system. The training requirements on TRN-10007 Insider Trading Policy, TRN-10008 Global Anti-Bribery and Anti-Corruption Policy and TRN-10009 Code of Business Conducts and Ethics must be diligently completed within 30 days from the hiring date and on an annual basis COMPUTER SKILLS: Microsoft Word; Microsoft Excel; Microsoft Access; QuickBooks. Notice to Staffing Agencies and Search Firms: RxSight does not accept unsolicited resumes or candidate submissions from staffing agencies or search firms for any employment opportunities. All agency engagements must be authorized in writing for a specific position by RxSight's Talent Acquisition department. Any resumes or candidate information submitted without such specific engagement will be considered unsolicited and the property of RxSight. No fees will be paid in the event a candidate is hired under these circumstances. Salary Description $25.00 to $27.00 per hour

Job Description Quality Control focuses on process control and providing accurate feedback to internal customers. Responsible for the effective management and/or day-to-day supervision of quality control and inspection. Responsible for following implemented standards, methods and procedures for inspecting, testing and evaluating the precision, accuracy, efficacy and reliability of products. Responsible for usage of software, hardware, materials, parts, and products to ensure adherence to established standards of quality. Responsible for defined product sampling and checks for non-conformity. Executes required inspections defined by sampling plans for product conformity with a focus on Customer satisfaction. Essential Duties and Responsibilities include, but are not limited to: • Inspect parts to ensure conformity to the customer requirement and to industry standards. These inspections include dimensional, visual, material handling, workmanship, paint applications, free of all FOD • Utilize various measuring tools, which may include manual measuring instruments, CMMs, mylars, visual measuring systems, etc. • Prepare, update, and inspect Company and Customer inspection records for accuracy, communicating as needed, clearly and concisely. • Actively contributes to a culture of continuous improvement • Other duties as assigned Qualifications: Experience and Education: 5 - 6 years of relevant experience High school degree or equivalent, plus advanced training Technical Skills: Excellent attention to detail Working knowledge of customer specifications and requirements Basic computer skills Problem solving abilities Strong verbal and written communication skills Ability to use measuring equipment Ability to work both individually and in a team environment Understand and obey safety requirements Commitment to keep work area clean and free of debris Physical Requirements: Must be able to lift and/or move up to 50lbs Specific vision abilities include close and distance vision, depth perception and ability to adjust focus Ability to use hands to finger, handle, or feel, as well as reach with hands and arms for extended periods of time o Capable of standing for long periods Supervisory Responsibilities: None. Travel Required: N/A

Quality Control focuses on process control and providing accurate feedback to internal customers. Responsible for the effective management and/or day-to-day supervision of quality control and inspection. Responsible for following implemented standards, methods and procedures for inspecting, testing and evaluating the precision, accuracy, efficacy and reliability of products. Responsible for usage of software, hardware, materials, parts, and products to ensure adherence to established standards of quality. Responsible for defined product sampling and checks for non-conformity. Executes required inspections defined by sampling plans for product conformity with a focus on Customer satisfaction. Essential Duties and Responsibilities include, but are not limited to: • Inspect parts to ensure conformity to the customer requirement and to industry standards. These inspections include dimensional, visual, material handling, workmanship, paint applications, free of all FOD • Utilize various measuring tools, which may include manual measuring instruments, CMMs, mylars, visual measuring systems, etc. • Prepare, update, and inspect Company and Customer inspection records for accuracy, communicating as needed, clearly and concisely. • Actively contributes to a culture of continuous improvement • Other duties as assigned Qualifications: Experience and Education: 5 - 6 years of relevant experience High school degree or equivalent, plus advanced training Technical Skills: Excellent attention to detail Working knowledge of customer specifications and requirements Basic computer skills Problem solving abilities Strong verbal and written communication skills Ability to use measuring equipment Ability to work both individually and in a team environment Understand and obey safety requirements Commitment to keep work area clean and free of debris Physical Requirements: Must be able to lift and/or move up to 50lbs Specific vision abilities include close and distance vision, depth perception and ability to adjust focus Ability to use hands to finger, handle, or feel, as well as reach with hands and arms for extended periods of time o Capable of standing for long periods Supervisory Responsibilities: None. Travel Required: N/A

Job Description Sunny Sky Products prides itself on our commitment and dedication to creating, manufacturing and delivering top quality products in the beverage industry. We have generated an extensive product portfolio that includes frozen dispensed beverages, cold dispensed, hot dispensed and beverage enhancers. The Company is seeking an organized, deadline oriented, self-starter to work in a fast-paced environment. An ideal candidate must possess excellent attention to detail; be able to read, write, understand, and speak English; and be able to handle raw ingredients. This individual will need to be able to perform all duties assigned and take a personal initiative in ensuring Quality Assurance compliance throughout the plant. In addition, the candidate should be able to update GMP's, SOP's, SSOP's, COA's etc. as well as audit for compliance. This candidate will report to the Quality Assurance Lead as well as the Quality Assurance Manager. Hours Full time job Monday- Friday 6AM- 2:30PM 8-hour shift plus occasional overtime Weekend availability as needed Salary $23.50/hr. New hire Bonus program up to $500.00 Benefits Medical, Dental & Vision Coverage Life Insurance 10 Paid Holidays PTO - Vacation Time Sick Pay 401K Program Company STD & LTD (Short term & Long-term disability) Basic Life Insurance & AD&D Insurance Perfect Attendance Monthly Bonus Program up to $100.00 Employee Referral Bonus Program up to $500.00 For more information about our company please visit our website at ************************ Sunny Sky Products is an equal-opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship.

DHL Supply Chain is Hiring! At DHL, you will play a part in one of the world's most essential industries. There has never been a better time to join DHL Supply Chain. In a global business like ours, the opportunities are endless. So, join us. Work with us. Grow with us. The core responsibilities of this role include: Ensure accurate checking, inspecting and/or counting of all products for both inbound and outbound departments and ensuring all product is free of damage or defect. Ensuring items are sorted, stored, and shipped following state and federal regulations per product handled in facility. Position: (First) 1st Shift Quality Tech II Shift: Mon-Thursday 5am-3:30pm. Overtime required based on business needs. Pay: $22.50 per hour In addition to the general job description below, the ideal candidate will also possess the following skills and/or experience: Supply Chain, Quality Control, Auditing, Product Compliance, Material or Product Inspection A minimum of one (1) years' experience in the following: * Ensure accurate checking, inspecting and/or counting of all products for both inbound and outbound departments and ensuring all product is free of damage or defect. * Auditing product and packaging/labeling to maintain highest level of product compliance and accuracy * Ensure the quantity, quality, labeling, and shipping address of orders correspond to customer specifications or other requirements. * Ensure items are sorted, stored, and shipped following state and federal regulations per product handled in facility. * Experience using a commercial WMS (warehouse management system) such as Blue Yonder, Red Prairie, JDA, SAP, etc. * Microsoft Office software, including Excel. Be part of the world's largest logistics company! DHL Supply Chain has been certified as a Great Place to Work in the US and Canada! Our excellent benefits packages includes: - Affordable medical, dental, and vision coverage available beginning on your 30th day - PTO program for all associates, including paid holidays and vacation - 401(k) with generous company match - Tuition reimbursement program - Excellent training and career advancement opportunities Grow your skills. Shape your world. Role Purpose: Execute assigned tasks to support establishment, maintenance, alignment and continual improvement of the QA System. Responsible for day-to-day Quality Assurance activities to ensure compliance with governmental regulations, customer requirements, quality assurance policies and procedures and accommodating requests for support. Key Accountabilities: * Perform Quality audits, inspections and documentation. * Perform daily quality assurance activities as required or directed by management. * Monitor and report level of QMS implementation, compliance and effectiveness through audit activities, observation, review of quality metrics and customer feedback. * Support QA training for new and existing associates. * Support coordination of QA license, permit and registration activities. * Work with Quality Assurance, Ops Performance and Process Improvement teams to progress Quality initiatives. Required Education and Experience: * High School Diploma or Equivalent * Forklift operator certificate or satisfactory completion of forklift training program with the first 30 days of employment * Associate degree or equivalent in related field of study, preferred Our Organization is an equal opportunity employer. #LI-Onsite #LI-DNI ","title

Job Title: Medical Assistant - Women's Health Medical Assistant (MA) Pay: $21.00/hour Schedule: Full-Time (various shifts available) Job Description We are seeking a motivated and compassionate Medical Assistant (MA) to join our growing healthcare team. This role supports providers in delivering high-quality patient care in a fast-paced clinical environment. Openings are available in Downtown Los Angeles (DTLA) and Lynwood, CA. Responsibilities Room patients and obtain vital signs Prepare patients for examinations and procedures Assist providers with clinical procedures as needed Perform EKGs, injections, and blood draws (as applicable) Update and maintain accurate patient records in the EMR Schedule appointments and coordinate patient flow Maintain a clean, safe, and organized clinical environment Provide excellent customer service and patient support Qualifications Certified Medical Assistant preferred (or completion of an MA program) Minimum of 1 year of clinical experience preferred Knowledge of basic clinical procedures and medical terminology Strong communication and interpersonal skills Ability to multitask in a fast-paced setting Bilingual (Spanish/English) a plus Reliable transportation to DTLA or Lynwood locations Benefits Competitive pay at $21/hour Medical, dental, and vision benefits (eligibility varies) Paid time off and holidays Supportive team environment Opportunities for growth and advancement Job Type & Location This is a Contract to Hire position based out of Los Angeles, CA. Pay and Benefits The pay range for this position is $21.00 - $21.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Los Angeles,CA. Application Deadline This position is anticipated to close on Jan 30, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

This role is designed for Second Shift. The **Quality Technician I** supports the Quality Engineering group through processing First Article Inspection (FAI) and Part Approval Process, selective inspection, analysis and processing of internal Nonconformance Reporting (NC) material and other administrative and logistical support duties. Represents the Quality Department in witnessing and documenting UAV flight acceptance test activity. **Position Responsibilities** + Processes inbound or outbound FAI and deliverable submissions accurately and timely including: receipt and analysis of parts and/or supporting documentation; completion of associated records and logs; communication of submission status as needed to QEs, managers, engineers or interested parties; processing of parts after completion; maintaining records and files associated with submissions; and other related tasks + Conducts selective inspection under the direction of the QE group including: receipt and verification of material, completion and maintenance of related documentation, communication of inspection results to concerned parties and processing of material after verification using Agile/Oracle database + Processes internal non-conforming material as needed in support of QE including: retrieval and analysis of material, interpretation of preliminary findings and restatement of problem statements to ensure understanding of problem, processing material through the necessary NC processes, communication of status to concerned parties, maintaining necessary documentation and processing material to internal and external suppliers + Provides general support of QEs including communication, Corrective Action Request processing, product evaluation, and sorting activities under exceptional circumstances, and interfacing with other team members as necessary to complete assigned tasks in support of continuous improvement initiatives using A3, Six Sigma DMAIC forms + Support DCMA Source Inspection process + Coordinates with Shipping and Contracts department as needed to ensure timely delivery + Also will assist flight test operators as necessary + Responsible for creating the Final Inspection documentation package including COC, TDR's, etc., and as necessary support internal/external customer inspection + Represents and supports QEs during internal and 3rd party audits regarding the essential functions above and as needed regarding our measurements system and documented system + Works on assignments that are routine in nature, requiring limited judgment + Other duties as assigned **Basic Qualifications (Required Skills & Experience)** + High School Diploma or GED equivalent is required + 0 - 1 years of related work experience or equivalent combination of education, training, and experience + Aerospace quality management system experience (AS9100DD) and/or internal audit experience is preferred + Demonstrated knowledge in mechanical inspection methods and skills including surface plate work, hand tools, and gages, etc. + Solid ability to read and understand drawing requirements including a solid understanding of Geometric Dimensioning and Tolerance to ANSI Y14.5 + Possesses basic knowledge of engineering drawings and specification systems + Basic knowledge of FAI validation and verification process requirements + Basic knowledge of engineering drawings and specification systems + Strong computer skills and has basic proficiency in MS Office Suite (Word, Access, PowerPoint, Excel) + Must be able to fill out the necessary flight test documentation + Must have the skills necessary to perform pre and post-flight visual inspections on flight hardware and components + Must possess the skills necessary to remove and replace field replaceable components on aircraft. Will populate excel spreadsheets on a daily basis documenting flight test results + Must be able to document any/all non-conformances encountered + Required to travel to and from remote flying sites on a daily basis + Must have a valid California driver's license and clean driving record + Willingness to work overtime also a must **Other Qualifications & Desired Competencies** + 2 year technical degree preferred; Quality system courses and/or equivalent experience preferred + Receives detailed instructions on all work. Works under close supervision. Acquires job skills and learns company policies and procedures to complete routine tasks + Solid ability to accurately record and manage data, records, files and other documents to support tasks + Has an analytical approach to problem solving and high organizational skills as well as effective time management, interpersonal and communication skills + Strong ability to manage time and prioritize tasks + Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties + Displays strong initiative and drive to accomplish goals and meet company objectives + Takes ownership and responsibility for current and past work products + Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company + Builds effective problem-solving, analytical, interpersonal and communication skills. Focuses on teamwork, collaboration and puts the success of the team above one's own interests **Physical Demands** + Ability to work the majority of the time outdoors in varying weather conditions, when needed, during flight test activity (Frequent) + Ability to lift up to 50 lbs. and carry/move objects of varying shapes and sizes (Frequent) + Regularly required to, stand, sit; talk, hear, and use hands and fingers to operate a computer and telephone keyboard (Frequent) **Clearance Level** Clearance Level AeroVironment considers several factors, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. **ITAR Requirement:** _T_ _his position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A "U.S. person" according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements._ **Benefits** : AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************* . We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. **Who We Are** Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. **What We Do** Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. _We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status._ **ITAR** U.S. Citizenship required **About AV:** **AV isn't for everyone. We hire the curious, the relentless, the mission-obsessed. The best of the best.** We don't just build defense technology-we redefine what's possible. As the premier autonomous systems company in the U.S., AV delivers breakthrough capabilities across air, land, sea, space, and cyber. From AI-powered drones and loitering munitions to integrated autonomy and space resilience, our technologies shape the future of warfare and protect those who serve. Founded by legendary innovator Dr. Paul MacCready, AV has spent over 50 years pushing the boundaries of what unmanned systems can do. Our heritage includes seven platforms in the Smithsonian-but we're not building history, we're building what's next. **If you're ready to build technology that matters-with speed, scale, and purpose-there's no better place to do it than AV.** **Careers at AeroVironment (*****************************************

Under the direction of the NA Quality Team, the Quality Technician is responsible for supporting Inspection and rework of products sold by Johnson Health Tech North America. Duties will include working directly with operations teams to improve quality, supporting the documentation and tracking of defects, and coordinating rework efforts to fix issues as soon as possible in accordance with company policies and procedures. Responsibilities Inspection * First Piece inspection of new SKU's * Targeted Inspection of inventory based on issues found * Inbound, assembly, and outbound quality Rework * Rework finished goods in advance of assembly * Coordinate and train temp labor to assist in rework Training * Face-to-face interaction with the assembly team daily * Research proper assembly procedures and provide assembly instructions * Report defects and train the assembly team on entering defects into tracking system * Lead/Participate in continuous improvement projects Requirements Education: * High school diploma required * Associate degree in technical field preferred * Additional training and/or certifications in quality systems preferred Experience: * Assembly experience preferred * Past experience in an inspection or repair service role preferred Other Requirements: * Proficiency in Office 365 products * SAP experience preferred * Forklift certification * Familiarity with measuring instruments. Examples include: VOM calipers, tension gauges, etc. * Valid drivers license is required * Ability and willingness to travel both domestically and internationally Benefits: We offer an excellent compensation package and team-oriented work environment with growth opportunities. Some of our outstanding benefits include: * Health & Dental Insurance * Company paid Life Insurance * 401(k) * Paid Time Off benefits * Product discounts * Wellness programs EOE/M/W/Vet/Disability #ZR

About Harbinger Harbinger is an American commercial electric vehicle (EV) company on a mission to transform an industry starving for innovation. Harbinger's best-in-class team of EV, battery, and drivetrain experts have pooled their deep experience to bring a first-of-its-kind EV platform to support the growing demand for medium-duty EVs and Hybrids. Harbinger: Familiar Form, Revolutionary Foundation. Job Overview As a 2nd shift Quality Technician, GA/Chassis, you will play a crucial role in ensuring the quality and reliability of our EV platform. You will be responsible for conducting thorough inspections, implementing quality control measures, and collaborating with cross-functional teams to maintain and improve our production standards. You may also be required to maintain calibrated test equipment, prepare test data, and identify areas for quality control improvement. What You'll Do: Inspection and Testing: Conduct detailed inspections of automotive components and finished products to ensure compliance with quality standards and specifications Quality Control: Implement and maintain quality control processes throughout the production cycle Continuous Improvement: Actively participate in root cause analysis and corrective action initiatives to address quality issues and prevent recurrence Collaboration: Work closely with production teams, engineers, and other stakeholders to communicate quality standards and expectations Training and Development: Provide training to production staff on quality control procedures and best practices Who You Are: High school diploma required (College degree or equivalent preferred but not required) 2 or more years of experience in a Manufacturing, Quality, or Process focused role Strong mechanical aptitude and trouble-shooting skills Excellent attention to detail and analytical skills Effective communication and collaboration skills Strong understanding of chassis or automotive assembly is preferred Hours: This role is assigned to Shift 2 / standard hours (4:00pm - 12:30am) , and the shift schedule is subject to change. California Pay Range $25-$32 USD Equal Opportunity Harbinger is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law. Harbinger is committed to ensuring that our hiring process is accessible for persons with disabilities. If you have a disability or limitation, such as those covered by the Americans with Disabilities Act, that requires accommodations to assist you in the search and application process, please email us at ************************. Candidate Data Privacy Harbinger may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in our recruitment processes (“Candidate Personal Data”). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Harbinger may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Harbinger may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our HR, legal, and finance teams, and the team(s) with the position(s) for which you are applying; (ii) Harbinger affiliates; and (iii) Harbinger's service providers, including providers of background checks, staffing services, and cloud services. Harbinger may transfer or store internationally your Candidate Personal Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Please note that we are currently not accepting applications from third party application services. Any unsolicited resumes or candidate profiles submitted in response to our job posting shall be considered the property of Harbinger and are not subject to payment of referral or placement fees if any such candidate is later hired by Harbinger unless you have a signed written agreement in place with us which covers the applicable job posting.

The Quality Engineer Associate supports the Quality team in achieving Summit's goal of Perfect Quality by assisting in the monitoring, documentation, and improvement of quality systems and processes. This role works closely with operations, manufacturing, and engineering teams to ensure products meet internal and customer expectations, as well as IPC standards for printed circuit boards. Ideal for a candidate beginning their career in quality engineering or manufacturing, this position offers the opportunity to develop hands-on skills in quality systems, inspection, data analysis, and continuous improvement within a high-tech manufacturing environment. The goal is to develop into a full Quality Engineer. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactory. The requirements listed below are representative of the knowledge, skill and/or ability required. Required Skills: Responsibilities: In-Process Quality Support Learn and conduct in-process inspections, quality checks, and test data collection Maintain accurate documentation for quality records, logs, and forms Support the calibration system and assist with calibration tracking Help monitor process performance using basic data collection and analysis tools Participate in internal audits and prepare data or records as needed Documentation and Reporting Assist in maintaining document control procedures Support the generation of quality reports, charts, and metrics Help track nonconforming material and participate in root cause analysis Input and track Corrective Action Requests (CARs) and Supplier CARs (SCARs) Process Improvement Support Quality Engineers in continuous improvement activities Help identify opportunities for reducing defects and improving yields through performing data analysis and area assessments. Assist with implementation and monitoring of statistical process control (SPC) where needed Customer and Supplier Support Support customer quality surveys, tours, or audits as needed Assist with returned material analysis and simple failure analysis tasks Coordinate with outside test or lab services to support inspection processes 2. Goals Continuously provide assessments and work collaboratively to support improved process controls and yields. Develop measurement parameters to track progress. Work both individually and as part of a cross-functional team to support timely customer deliverables and inquiries. Education/Experience: Required: Associate's or Bachelor's degree in Engineering, Industrial Technology, or related field - or equivalent experience in a manufacturing/quality environment Basic understanding of quality principles and manufacturing processes Proficient in Microsoft Excel, Word, and PowerPoint Strong attention to detail and organizational skills Willingness to learn technical standards (e.g., IPC) and quality systems Interest in working in a hands-on capacity with tools in the laboratory and manufacturing areas, as well as, in performing data analysis. Ability to communicate clearly and work collaboratively across departments Preferred: Prior internship or experience in a quality, manufacturing, or engineering role Familiarity with inspection tools (calipers, micrometers, gauges, etc.) Exposure to ISO 9001 or similar quality management systems Understanding of SPC, basic statistics, or root cause analysis tools (5 Whys, Ishikawa) Physical Demands: Employee may lift and/or move up to 25 lbs as required to perform duties. Excellent concentration and must be able to remain focused in a dynamic fast-paced environment. ITAR Compliance Notice This position requires compliance with the International Traffic in Arms Regulations (ITAR). Under ITAR, candidates must be a U.S. citizen, U.S. lawful permanent resident (e.g., "Green Card" holder), asylee, or refugee as defined by 8 U.S.C. 1324b(a)(3). Applicants who do not meet this requirement may not be eligible for employment in this position. Summit Interconnect is an Equal Opportunity Employer We are committed to fostering an inclusive and diverse workplace where everyone is valued and respected. We provide equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status, or any other legally protected characteristic