Quality assurance technician jobs in Trenton, NJ

Job DescriptionShift & Hours: Quality Assurance Technician: 3rd shift 10 PM - 6:30AM Payrate: $19.40/hour Weekends are included Job Summary: Quality Assurance Technician:The Quality Assurance Technician conducts physical product inspection of raw ingredients, work in progress and finished products in support of manufacturing and Operations. Additionally, the technician provides feedback of product checks to Operations for decision-making purposes. This Position requires a general knowledge of quality assurance. This position is to ensure the best quality products. Support without hesitation General Plant Safety, Food Safety, Food Defense Initiatives and Good Manufacturing Practices with an understanding that these are absolutes and are Priority #1 Monitor finished product which includes review for completeness, label check, weight check, and visual inspection of final product and verify all product is being produced according to specification and report any concern to production supervision. Control the product quality as it is an absolute priority Monitor all processing areas for food safety conditions Confirm all metal detectors are performing properly Must have complete knowledge of GMP's and must notify Supervisor if anything is not in compliance with GMP's or Product Specification Responsible for monitoring continuous GMP compliance for all Employees, Contractors, Vendors or Visitors Monitor the mixing process area for the bread and roll lines and monitor Lot traceability of ingredients Check temperature of sensitive raw materials upon receiving. Maintain proper calibration of product testing equipment (thermometers and hand scales) May be required to place on hold any questionable product Collect retention samples and maintain product retention for consumer complaints and process control as per specifications Cross over and walk the process together with the relieving shift QA Technician at the end of the shift Check and record flour-sifting tailings one time per shift. Maintain ongoing Temperature Logs for various raw materials, freezers and finished product. Audit conditions of docks, freezers, staging areas and of trailers Work closely with production team to complete a Food Safety Incident Report if an incident occurs Assist in a Monthly Facility Audit as required and assist with document control, in the review of quality documents Perform all special requests assigned by the Quality Assurance Manager Qualification/Experience: Quality Assurance Technician: ·High School Diploma or GED Equivalent required. College and/or trade school education is preferred. Basic math skills Must be able to follow written SOP's/work instructions Previous experience in food or pharmaceutical, preferred Ability to write simple correspondence Must be able to respond to verbal and written instructions Work Environment: Quality Assurance Technician:Work requires some physical strain such as long periods of standing and walking in the production facility. Working around moving machines in production area. Protective clothing such as uniforms, gloves and slip resistant shoes may be required. Very hot conditions in certain areas during the summer seasons. Onsite Personnel is an equal opportunity employer committed to hiring a diverse workforce in an inclusive culture environment. Onsite Personnel does not discriminate based on disability, veteran status or any other basis protected under federal, state, or local laws.

Date 06/2025 Title Associate, In-Process Quality Assurance MFG/PKG Department Quality Assurance Operation Support Reports to Quality Assurance Manager/ VP of QA FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The IPQA performs line inspection as part of the cGMP, SOPs, and policy compliance requirements as per CFR part 111. Performs In-process quality testing in manufacturing and/or packaging areas according to prescribed timelines and accurately captures test results in batch records. The Inspector performs calibrations & measurements on raw materials, bulk products, finished products and packaging components as required in batch records and SOP's. This position reports to the QA Manager and is a key member of the Quality Assurance group. The IPQA Associate is a highly organized self-starter who can work independently, demonstrates a positive attitude, and a bias for action. Areas of Responsibility IPQA - Level 1: To support In-process quality assurance activities by performing routine checks and verifications during manufacturing and/or packaging of nutraceutical products. This role ensures that all processes comply with applicable GMP, SOPs, and regulatory requirements. Key Responsibilities: ???? Manufacturing Support Perform line clearance before starting blending, granulation, compression, encapsulation, coating processes. Perform In-process checks: Blend uniformity sampling Tablet/capsule weight variation Hardness, friability, and disintegration tests etc as applicable Verify equipment cleaning and area hygiene as per SOP. Collect and label In-process and stability samples under supervision. ???? Packaging Support Ensure line clearance before packaging activities. Perform In-process checks: Batch number and expiry date printing Label application and carton sealing Primary and secondary packaging integrity etc as applicable Assist in reconciliation of packaging materials (e.g., printed cartons, leaflets, labels). ???? Documentation Record observations in IPQA checklists, logbooks, and batch records. Maintain GMP documentation in real-time (legible and error-free). Escalate any deviation or abnormality immediately to the QA Executive/Supervisor. ???? Compliance & Safety Adhere to company GMP, SOP, and Hygiene policies. Use PPE appropriately. Support during internal/external audits by providing necessary records. Cleans up work following the completion of a shift. Meets all safety expectations and follows all safety practices. Works extended hours and occasional weekend overtime. Other duties as assigned Other Responsibilities Including Safety: IPQA - Level 2: To independently perform and document In-process quality assurance activities at all critical stages of manufacturing and packaging of nutraceutical products, ensuring compliance with GMP, SOPs, and regulatory requirements. Key Responsibilities: ???? Manufacturing Stage (Granulation, Blending, Compression, Encapsulation, Coating ) Carry out and document line clearance activities before starting each manufacturing batch. Conduct in-process checks independently: Blend uniformity sampling Tablet/capsule weight variation Hardness, friability, thickness, and disintegration In-process controls as per BMR specifications Verify equipment cleanliness status, calibration, and logbook entries. Monitor and record environmental conditions in production areas (temperature, RH, differential pressure). ???? Packaging Stage Conduct line clearance for primary and secondary packaging (bottles, strips, blister, cartons). Perform and document: Batch coding verification (batch no., Mfg/Exp date) Packaging material correctness (labels, leaflets, cartons) Sealing integrity checks (blisters, induction seals) Online rejection bin and reconciliation checks Ensure correct usage of approved packaging materials with status labels. ???? Documentation & Compliance Fill Batch Manufacturing Records (BMR) and Batch Packaging Records (BPR) in real-time. Record IPQA observations and results as per SOPs ( legible and error free). Initiate and report deviations, OOS/OOT, and non-conformities to QA Supervisor/ Manager. Support CAPA implementation and change controls. ???? General QA Duties Ensure compliance with GMP, GLP, and data integrity principles. Follow gowning protocols, hygiene, and safety measures in production areas. Assist during internal audits and regulatory inspections by providing accurate documentation and data. Cleans up work following the completion of a shift. Meets all safety expectations and follows all safety practices. Works extended hours and occasional weekend overtime. Other duties as assigned Other Responsibilities Including Safety: IPQA - Level 3: To lead and monitor In-process QA activities during nutraceutical manufacturing and packaging operations. Ensure compliance with GMP, regulatory standards, and internal SOPs by supervising IPQA teams, reviewing records, and addressing quality deviations. Key Responsibilities: ????IPQA Oversight - Manufacturing & Packaging Supervise and verify line clearance activities across all manufacturing and packaging areas. Ensure compliance with critical process parameters (CPPs) and critical quality attributes (CQAs). Review and approval: In-process checks: weight variation, hardness, friability, disintegration etc as applicable Environmental monitoring records Equipment and area cleaning records Coordinate and monitor sampling activities for In-process, finished products and stability studies. ???? Review and Verification Review and verify completed Batch Manufacturing Records (BMR) and Batch Packaging Records (BPR). Cross-check reconciliation of raw materials and printed packaging materials. Verify proper use of status labels (approved/rejected/quarantine). ???? Deviation & CAPA Management Investigate and document process deviations, non-conformances, and OOS/OOT incidents. Lead root cause analysis (RCA) and implement Corrective and Preventive Actions (CAPA). Coordinate with cross-functional teams (Production, QC, Regulatory Affairs) to ensure closure of quality events. ???? Audit & Compliance Ensure readiness for internal, external, and regulatory audits (FSSAI, WHO-GMP, USFDA, etc.). Conduct routine GMP audits, spot checks, and area inspections. Train shop-floor personnel on data integrity, documentation practices, hygiene, and gowning protocols. ???? Team Coordination Guide and mentor IPQA Level 1 and Level 2 personnel. Allocate daily QA responsibilities and monitor adherence to QA procedures. Conduct on-the-job training for new team members Cleans up work following the completion of a shift. Meets all safety expectations and follows all safety practices. Works extended hours and occasional weekend overtime. Other duties as assigned Other Responsibilities Including Safety: Meets all safety expectations and follows all safety practices. Works extended hours and occasional weekend overtime. Other duties as assigned Other Responsibilities Including Safety: N/A Other Responsibilities Including Safety: Works in a safe and responsible manner to create an injury-free and incident-free workplace. Complies with all job-related safety and other training requirements. Keeps management informed of area activities and of any significant problems. Requirements Education & Qualification: IPQA - Level 1: 0-1 year (Freshers with training or internship in QA preferred) Or equivalent combination of education and experience. High School diploma is required; BS degree in a life science discipline (e.g., Chemistry, Microbiology, Biochemistry) a plus. IPQA - Level 2: Minimum of 3+ years of experience in a QA Inspector within a nutritional's supplements, food, consumer products or pharmaceutical company. Or equivalent combination of education and experience. BS degree in a life science discipline (e.g., Chemistry, Microbiology, Biochemistry) a plus. IPQA - Level 3: 3-5 years in IPQA or related QA roles in nutraceuticals, pharmaceuticals, or food manufacturing. Or equivalent combination of education and experience. BS degree in a life science discipline (e.g., Chemistry, Microbiology, Biochemistry) a plus. Certifications, Licenses, Credentials: N/A Skills & Ability IPQA - Level 1: Basic understanding of GMP, nutraceutical processes, and QA principles. Good observation and attention to detail. Willingness to work in production areas (shifts, growing zones). Ability to follow instructions and standard procedures accurately. Basic proficiency in English and documentation practices. IPQA - Level 2: Strong knowledge of IPQA functions, SOPs, and process flow in nutraceuticals. Understanding of basic analytical parameters (weight variation, friability, etc.). Good documentation and observational skills. Proficient in using basic lab and QA tools (weighing balances, disintegration testers). Familiar with regulatory guidelines (FSSAI, WHO-GMP, USFDA, HACCP). IPQA - Level 3: In-depth understanding of nutraceutical manufacturing processes and regulatory compliance. Proficient in QA documentation, process audits, and deviation handling. Strong analytical and decision-making skills. Familiar with QMS tools, GMP documentation, and data integrity principles. Working knowledge of SOP writing, change control, and risk assessment. Physical Requirements (lifting, etc.): Ability to lift up to 35 lbs.; occasionally lift and move up to 50 pounds. Must stand and walk on production floor a minimum of 6 hours per shift Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from waist, or squatting, walking short distances. Occasionally works from a rolling ladder or step stool. Must be able to wear all PPE including lab coat, face mask, booties, gloves, safety glasses. Work Environment (Office, Warehouse, temperature extremes, etc.): Work is regularly performed inside a manufacturing and packaging environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. First shift$24.00 to $30.50Second Shift$24.00 to $31.00 3rd shift 11.00 PM to 7:30 PM

Job DescriptionDescription: RK Pharma Inc, a vertically integrated pharmaceutical company headquartered in NJ, is seeking an Quality Assurance Associate to work with our growing Quality Assurance Team as we scale towards commercial manufacturing in the next upcoming months.? As a company focused on the development, manufacturing and sale of high quality and affordable generic pharmaceutical products worldwide we are looking for sharp, driven, self-directed individuals to help us grow our mid-stage start-up team. This position is located in East Windsor, NJ and is required to be onsite. Requirements: If this sounds interesting to you, it's probably because up to this point you have: Bachelor's degree in Pharmaceutical Sciences, Chemistry, Biology, or a related technical field. 1-3 years of experience in a pharmaceutical or GMP-regulated environment. Solid understanding of cGMP, GDP, and FDA regulations. Experience with batch record review, deviation handling, and change control processes. Familiarity with document management systems (e.g., MasterControl). Strong attention to detail and accuracy in reviewing technical and regulatory documents. Excellent written and verbal communication skills for cross-functional collaboration. Ability to work independently and manage multiple priorities in a fast-paced environment. The main expectations and responsibilities for this position are: Review batch production and packaging records for accuracy, completeness, and GMP compliance prior to product release. Perform in-process line checks and quality inspections to ensure adherence to SOPs and specifications. Support deviation and change control processes, ensuring timely investigation and documentation. Participate in internal audits, walkthroughs, and inspection readiness activities. Maintain and update controlled documents, including SOPs, MBRs, and validation protocols. Collaborate with Quality Control, Production, and Engineering to resolve quality issues and drive continuous improvement. Ensure all QA activities are properly documented in accordance with GDP and data integrity principles. Support training, risk assessments, and compliance reviews as assigned by QA management. If this sounds like something that is of interest to you, please don't hesitate to apply to start a conversation. We look forward to getting to know more about you and the skills you can bring to a company like RK Pharma Inc.

Kenvue is currently recruiting for a: QA Associate I-Investigations What we do At Kenvue , we realize the extraordinary power of everyday care. Built on over a century of heritage and rooted in science, we're the house of iconic brands - including NEUTROGENA , AVEENO , TYLENOL , LISTERINE , JOHNSON'S and BAND-AID that you already know and love. Science is our passion; care is our talent. Who We Are Our global team is ~ 22,000 brilliant people with a workplace culture where every voice matters, and every contribution is appreciated. We are passionate about insights, innovation and committed to delivering the best products to our customers. With expertise and empathy, being a Kenvuer means having the power to impact millions of people every day. We put people first, care fiercely, earn trust with science and solve with courage - and have brilliant opportunities waiting for you! Join us in shaping our future-and yours. For more information , click here . Role reports to: Supervisor 1, Quality Assurance Location: North America, United States, Pennsylvania, Fort Washington Work Location: Fully Onsite What you will do The QA Associate I - Investigations is accountable to supporting the investigation and CAPA process that pertains to the QC laboratories, facilities, manufacturing and packaging operations in addition to guidance on compliance and Good Manufacturing Practice (GMP) to meet company procedures, standards and regulatory expectations. This position assures that non-conformance investigations, laboratory investigations and quality systems are in compliance with the good manufacturing practices and good laboratory practices as established in the code of local government regulations and company procedures. Supports multiple functions in providing sound and timely decision making by utilizing root cause analysis, statistical, and problem-solving tools. Through the investigation process, this position will identify significant compliance issues and prioritize for action. Responsible for supporting the monitoring of investigation and CAPA systems, effectiveness, and continuous improvement of the Investigation /CAPA system at the Fort Washington site and Network / Global levels, as required. Ensures Investigation / CAPA Corrective and preventative Quality System compliance as established in 21 Code of Federal Regulations (CFR) 210 and 211 Current Good Manufacturing Practices (cGMP) regarding quality methods and manufacturing and packaging processes and procedures. Ensures that the process meets all internal and regulatory quality standards. Key Responsibilities Initiates deviations, performs root cause analysis, conduct investigations to assess impact on products and process, recommends product disposition and recommends change controls and CAPA's as needed. Investigate process deviations through discussion with all applicable parties, such as: Manufacturing Ops, Tech Ops, Packaging Ops, and Maintenance. Draft reports to summarize the details surrounding the deviations for input into the EtQ Symphony system. Prepare draft investigations and investigational protocols as required. Ensure all investigations are drafted to meet site specified timelines and are completed prior to release of associated product(s). Make recommendations for corrective and/or preventative actions and discuss with applicable parties, such as: Manufacturing Ops, Tech Ops, Packaging Ops, and Maintenance. Participate in cross functional meetings related to investigations, CAPAs and product disposition as applicable to assist in identifying and eliminating daily challenges on compliance that affect the quality of the product. Assist in monitoring corrective/preventative measures to confirm effectiveness. Assist QA Release group and Operations to determine/understand their needs in order to support investigations. Participate in other projects/initiatives as assigned. What we are looking for Required Qualifications Bachelor's degree in a relevant field or equivalent. Requires 0-2 Years Work Experience Prior experience in liquid manufacturing in an OTC or Pharmaceutical facility. (Plant QA experience preferred) Experience with working effectively in a team-based environment. Good problem-solving skills, willing to dig deep to understand underlying issues. Excellent written and verbal communication skills. Self-directed to manage priorities and adhere to deadlines Clear and effective communication skills Strong experience using the Microsoft Office suite of applications (Word, Excel, PowerPoint) Desired Qualifications Familiarity with quality systems, regulations, and business impact. Understanding of quality frameworks and processes. Experience with audits, inspections, and corrective action plans. Experience with LIMS, SAP, and EtQ is preferred. What's in it for you Annual base salary for new hires in this position ranges: $61,880.00 - $87,360.00 This takes into account a number of factors including work location, the candidate's skills, experience, education level & other job-related factors. Competitive Benefit Package* Paid Company Holidays, Paid Vacation, Volunteer Time & More! Learning & Development Opportunities Kenvuer Impact Networks This list could vary based on location/region *Note: Total Rewards at Kenvue include salary, bonus (if applicable) and benefits. Your Talent Access Partner will be able to share more about our total rewards offerings and the specific salary range for the relevant location(s) during the recruitment & hiring process. Kenvue is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment based on merit without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, or protected veteran status and will not be discriminated against on the basis of disability. If you are an individual with a disability, please check our Disability Assistance page for information on how to request an accommodation.

Kenvue is currently recruiting for a: QA Associate I-Investigations What we do At Kenvue, we realize the extraordinary power of everyday care. Built on over a century of heritage and rooted in science, we're the house of iconic brands - including NEUTROGENA , AVEENO , TYLENOL , LISTERINE , JOHNSON'S and BAND-AID that you already know and love. Science is our passion; care is our talent. Who We Are Our global team is ~ 22,000 brilliant people with a workplace culture where every voice matters, and every contribution is appreciated. We are passionate about insights, innovation and committed to delivering the best products to our customers. With expertise and empathy, being a Kenvuer means having the power to impact millions of people every day. We put people first, care fiercely, earn trust with science and solve with courage - and have brilliant opportunities waiting for you! Join us in shaping our future-and yours. For more information, click here. Role reports to: Supervisor 1, Quality Assurance Location: North America, United States, Pennsylvania, Fort Washington Work Location: Fully Onsite What you will do The QA Associate I - Investigations is accountable to supporting the investigation and CAPA process that pertains to the QC laboratories, facilities, manufacturing and packaging operations in addition to guidance on compliance and Good Manufacturing Practice (GMP) to meet company procedures, standards and regulatory expectations. This position assures that non-conformance investigations, laboratory investigations and quality systems are in compliance with the good manufacturing practices and good laboratory practices as established in the code of local government regulations and company procedures. Supports multiple functions in providing sound and timely decision making by utilizing root cause analysis, statistical, and problem-solving tools. Through the investigation process, this position will identify significant compliance issues and prioritize for action. Responsible for supporting the monitoring of investigation and CAPA systems, effectiveness, and continuous improvement of the Investigation /CAPA system at the Fort Washington site and Network / Global levels, as required. Ensures Investigation / CAPA Corrective and preventative Quality System compliance as established in 21 Code of Federal Regulations (CFR) 210 and 211 Current Good Manufacturing Practices (cGMP) regarding quality methods and manufacturing and packaging processes and procedures. Ensures that the process meets all internal and regulatory quality standards. Key Responsibilities Initiates deviations, performs root cause analysis, conduct investigations to assess impact on products and process, recommends product disposition and recommends change controls and CAPA's as needed. Investigate process deviations through discussion with all applicable parties, such as: Manufacturing Ops, Tech Ops, Packaging Ops, and Maintenance. Draft reports to summarize the details surrounding the deviations for input into the EtQ Symphony system. Prepare draft investigations and investigational protocols as required. Ensure all investigations are drafted to meet site specified timelines and are completed prior to release of associated product(s). Make recommendations for corrective and/or preventative actions and discuss with applicable parties, such as: Manufacturing Ops, Tech Ops, Packaging Ops, and Maintenance. Participate in cross functional meetings related to investigations, CAPAs and product disposition as applicable to assist in identifying and eliminating daily challenges on compliance that affect the quality of the product. Assist in monitoring corrective/preventative measures to confirm effectiveness. Assist QA Release group and Operations to determine/understand their needs in order to support investigations. Participate in other projects/initiatives as assigned. What we are looking for Required Qualifications Bachelor's degree in a relevant field or equivalent. Requires 0-2 Years Work Experience Prior experience in liquid manufacturing in an OTC or Pharmaceutical facility. (Plant QA experience preferred) Experience with working effectively in a team-based environment. Good problem-solving skills, willing to dig deep to understand underlying issues. Excellent written and verbal communication skills. Self-directed to manage priorities and adhere to deadlines Clear and effective communication skills Strong experience using the Microsoft Office suite of applications (Word, Excel, PowerPoint) Desired Qualifications Familiarity with quality systems, regulations, and business impact. Understanding of quality frameworks and processes. Experience with audits, inspections, and corrective action plans. Experience with LIMS, SAP, and EtQ is preferred. What's in it for you Annual base salary for new hires in this position ranges: $61,880.00 - $87,360.00 This takes into account a number of factors including work location, the candidate's skills, experience, education level & other job-related factors. Competitive Benefit Package* Paid Company Holidays, Paid Vacation, Volunteer Time & More! Learning & Development Opportunities Kenvuer Impact Networks This list could vary based on location/region *Note: Total Rewards at Kenvue include salary, bonus (if applicable) and benefits. Your Talent Access Partner will be able to share more about our total rewards offerings and the specific salary range for the relevant location(s) during the recruitment & hiring process. Kenvue is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment based on merit without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, or protected veteran status and will not be discriminated against on the basis of disability. If you are an individual with a disability, please check our Disability Assistance page for information on how to request an accommodation.

Quality Assurance Technician Objective: Inspects and tests materials and products for form, fit, and functions at various stages of production, including incoming, in-process, and final. Compiles and evaluates data to determine and maintain quality and reliability of products. Essential Duties Performs receiving inspection of incoming material using various measuring devices such as comparators, Calipers, micrometers, meters, etc. Verifies documentation such as picking lists, vendor supplied test data, purchase orders, etc. Interprets and utilizes inspection procedures, blueprints, schematics, assembly drawings, work orders, specifications, and process documentation to perform quality tasks Confers with management, engineering, and production to determine quality and reliability standards. Selects appropriate inspection sample and performs appropriate inspections based on established inspection procedures or creates new procedures if necessary. Prepares charts, graphs, reports, and other documentation using various software applications. Work closely with production departments to assure manufactured products maintain conformance. Practices good housekeeping and safety procedures and adheres to all company policies. Knowledge, Skills and Abilities: To perform the job successfully, an individual should demonstrate the following knowledge, skills and abilities: Ability to verify parts meet specifications, visual inspection, confirm color codes. Ability to interpret drawings, ECN's, sketches, schematics, etc. Tools: micrometers, calipers, CMM's, depth mic's, etc. PC software knowledge ( Microsoft Office Suite) Able to analysis problems and provide solutions. Ability to work close with production personnel provide guidance and possibly training to enhance quality. Qualifications Education/ Experience: 5+ years QA experience. Or 3 years + Associates degree in related field Or 1 year + Bachelors degree in related field Additional Information All your information will be kept confidential according to EEO guidelines.

Lupin U.S. is comprised of a fast growing, innovative and robust team of manufacturing, Research and Development and commercial divisions. Somerset, New Jersey is home to one of eighteen commercial manufacturing sites globally and the only commercial manufacturing facility in the United States for Lupin. Somerset, New Jersey is also the location for Lupin's U.S. Sales Operations and Marketing divisions, as well as internal Product Development teams. Lupin has a significant generic pipeline and a growing Specialty Brand presence in the U.S. Our Inhalation Research and Development facility is located in Coral Springs, Florida focusing on generic and branded orally inhaled and nasal drug products. Key shared service functions are found at our beautiful harbor side location in Baltimore, Maryland. Adding to Lupin's U.S. footprint is a robust team of Clinical Operations experts in Blue Bell, Pennsylvania and a high performing Specialty salesforce located across the country. Lupin is prided on being people-focused and centered around how impactful we are with our customers. Join our U.S. team and become part of an organization that encourages professional development and innovation! We are looking for passionate and driven individuals who will help us to continue making medicine widely accessible to patients, and who strive to work by Lupin's Core Values of Teamwork, Passion for Excellence, Entrepreneurial Spirit, Respect and Care, Integrity, and Customer Focus. Responsibilities Role Summary The QA Associate is responsible for the assurance of the manufacturing activities within the Lupin Somerset sites. This position is responsible for working in the warehouse, process rooms, and packaging lines and evaluates all activities meets the acceptance criteria. This position will require 2nd shift hours: 2:00 p.m. - 10:30 p.m. Monday - Friday Essential Duties and Responsibilities Sample, inspect incoming raw materials, components, in-process, intermediates, and finished products and submits samples to the QC laboratory for analysis. Inspect the manufacturing equipment/rooms and packaging lines/ equipment for cleanliness and approve them for use before the start of the operation Perform QA in-process checks (Beginning, Middle and End) for manufacturing/packaging operations and determine the results meets against pre-determined standards and batch record Conduct AQL inspections on incoming materials and finished dosage forms against pre-determined Quality attributes. Collect and maintain QA Retain samples from all products manufactured. Assure that all retains are stored appropriately for accountability, annual inspection Sample and proofread all pharmaceutical labeling for conformance to the standard. Issues approved labels to the packaging lines for use. Inform immediately any manufacturing/packaging issue to the QA supervisor Assure all activities are following the batch records, departmental SOP's, GMP, and DEA regulations. Review of online batch records in terms of completeness of signatures, entries, and actual reconciliation/yields. Ensure the proper isolation of rejected or defective product/ material generated during the batch process and accountability in the batch record. Monitor facility and product environmental operating conditions. Provide necessary support to conduct root cause analysis for any incidents generated at the facility during all phases of the production and packaging process. Perform other QA duties as assigned Qualifications Education & Experience An Associate Degree or a Bachelor's Degree in a scientific field is preferred Minimum 3+ years' experience in a Quality Assurance role in the pharmaceutical industry Knowledge of the pharmaceutical manufacturing and/or packaging process Communication skills: Excellent command of written and spoken English Attention to detail is paramount Desire to achieve a high quality of work and diligent about following Standard Operating Procedures Knowledge and understanding of cGMPs, keeping up to date with current industry issues and changing regulations. SAP, Trackwise, LIMS or similar QMS system knowledge preferred Lupin is an equal opportunity and affirmative action employer. All qualified applicants will receive consideration for employment without regard to race, color, national origin, gender, religion, age, disability, veteran status, or any other classification as required by applicable law. The anticipated annual base salary range for this position in New Jersey is $45,000 to $63,000, plus a discretionary performance bonus (based upon eligibility). The final salary offered to a successful candidate may vary and will be dependent on several factors that may include but are not limited to: the type and length of experience within the job, the type and length of experience within the industry, skillset, education, business needs, etc. Lupin is a multi-state employer, and this salary range may not reflect positions that work in other states. Physical Requirements The physical requirements of the position generally include: standing, walking, sitting, using hands and fingers, reaching with hands and arms, talking and hearing. In some circumstances, bending, kneeling, crouching, stooping, and crawling may apply. This position may require lifting up to 15 pounds occasionally. Generally, work is performed in a manufacturing environment. Search Firm Representatives Please Read Carefully Lupin USA, and its Affiliates does not accept unsolicited assistance from search firms for employment opportunities. All CVs / resumes submitted by search firms for any current openings at our company without a valid written search agreement in place will be deemed the sole property of Lupin. No fee will be paid in the event a candidate is hired by Lupin as a result of an agency referral where no pre-existing agreement is in place. Where agency agreements are in place, introductions are position specific. Please, No phone calls or emails. #LI-CC #LI-DNI

The Quality Control Technician ensures that products meet quality standards by performing quality control on raw materials, semi-finished, and finished goods. This role involves verifying food safety and quality SOPs, conducting root cause analysis, and implementing corrective and preventive actions. Shift Schedule: 2nd Shift, 2-10 PM Monday-Friday Primary Responsibilities: * Ensure raw materials are released and available for Operations in coordination with supply chain team * Monitor receipt of incoming raw materials & manufacturing products to assure adherence to quality policies and procedures on a daily basis * Inspection of bulk deliveries (liquid sugar, corn syrup, flour, sugar, etc.) * Analytical testing where applicable * Record results in designated files for all testing performed * Ensure finished goods are released and available for customer shipments in coordination with supply chain team * Perform analytical and bake testing as indicated for each finished product * Record test results, finished product spreadsheet or other database as required for analytical, bake testing * Release product as required; apply hold tags to permanent holds, maintain hold file and update SAP to reflect status of all held product at any given time * Keep turnaround time according to the specifications * Daily production/ warehouse walk-through; plant and line checks; inline quality control checks verification * Support QA in cleaning verifications; lab coordination * Additional projects and tasks may be assigned to support Operations and the Quality Team as necessary * Close collaboration with production and warehouse on quality investigation on the production floor Requirement: * At least 2+ years or related work experience in similar setting * Bachelor's degree required in a relevant field (e.g., Quality Control Technology, Microbiology, Food Science) is preferred; may consider other education with related experience * Proficient in MS Office applications; Excel, Word, PowerPoint; SAP required * Adherence to Puratos dress code and PPE policies * Excellent written & verbal skills * Completion of SQF, GMP, and SOP training strongly preferred * Physical Demands: Occasional sitting, climbing/balancing, stooping/twisting, kneeling, squatting, crawling, push/pull, reaching, and gripping; frequent standing, walking; occasionally lift up to 50 lbs; frequently lift/carry up to 25 lbs * Environmental Conditions: occasional working at heights, exposure to hazards, working with machinery, frequently working with uneven ground, excessive noise, extreme temperatures, exposure to dust/fumes The following common allergens are processed in our facilities: wheat, eggs, dairy, and soy. Looking for a Career for Good? We offer a competitive compensation and benefit package, designed to promote a Happier, Healthier You which includes: Compensation: * Compensation for this role is hourly and will be based on your experience, skills, and location, with a typical range between $24.69/HR and $30.87/HR. * This role is eligible for a targeted annual bonus equal to $3500. Final bonus payouts are determined by both individual and company performance. Benefits: * Medical coverage starts the first of the month-no waiting period * Immediate 401(k) eligibility with fully vested matching contributions * Over 5 weeks of paid time off in your first year * Free life coaching, onsite health exams, and 24/7 access to Registered Nurses * Lifestyle Spending Account If you are a solution oriented and analytical thinker with a passion for leading and inspiring people, we invite you to experience the magic of being yourself and join us for "a career for good." If you are an internal employee - Apply here. #LI-DNI Apply now * Apply Now * Start applying with LinkedIn

Job Details Warminster, PA Full Time DaylightDescription Quality Technician Penn United Technologies, Inc. has an immediate need for full-time Quality Technician to join our Plastic Injection Mold team at our Warminster, PA location. As a Quality Technician, you would be responsible for working with various manufacturing teams to achieve quality production and work to continually improve manufacturing processes to help ensure customer satisfaction. About Us: Penn United, a leading advanced contract manufacturer since 1971, provides the highest quality precision manufactured solutions for our customers' complex needs. Our broad range of manufacturing services support a variety of industries including medical, defense and aerospace, connectivity, energy, fluid handling, and precision components for consumer goods. Through our diverse range of capabilities which includes Plastic Injection Molding, Engineering, Precision Machining/Grinding, Stamping, Carbide Manufacturing, Additive Manufacturing and more, our work plays a vital role in products used around the world every day. Penn United Technologies currently employs over 650 people across all divisions of our employee-owned precision manufacturing company. Our Plastic Injection Molding team is located in Warminster, PA approximately an hour north of Philadelphia. Responsibilities: Work with manufacturing technicians to achieve acceptable product, meet or exceed customer quality standards, goals and deliveries Perform inspections and audits of materials and audit manufacturing processes Utilize inspection tools such as micrometers, indicators, digital height gage and comparators as needed Identify and report discrepancies with standard, placing all nonconforming product on hold Create, maintain and file inspection logs and quality documents Audit manufacturing technician inspection logs and SPC charts, verifying with product samples Assist with or perform First Articles, Gage R&R and Capability Studies, etc. Assist in training quality and manufacturing team to follow inspection procedures and in the use of inspection equipment Maintain clean equipment and work area Qualifications Qualifications: Knowledge and Skills Understanding of blueprint reading and inspection techniques High degree of accuracy, attention to details and deadlines Strong reading, comprehension, math and problem-solving skills Capable of completing application training on: - Statistics/Statistical Process Control - Measurement/inspection equipment - Technical Math - Geometric Dimensioning and Tolerancing (dependent on job assignment) Visual acuity (20/20 vision or corrective lenses) Basic computer literacy, including Microsoft Office Suite Able to work well independently and cooperatively with teams Excellent organizational skills, self-motivated, able to effectively manage multiple tasks Strong ability to professional communicate using verbal and written skills Candidates must be able to work daylight shift, lift up to 40 lbs., and stand 8-10 hours per day Education/Experience Required: High school diploma or equivalent Desired: Experience with Smart Scopes and Quest machines What we offer you: We offer an array of excellent benefits that reflect our commitment to the health and financial well-being of our employee-owners including: COMPETITIVE STARTING WAGE WITH THE OPPORTUNITY FOR TWO PAY INCREASES IN THE FIRST YEAR HEALTH BENEFITS Medical, dental, vision, Rx insurance that starts the first day Flexible Spending Account (FSA) Employee Assistance Program (EAP) Hearing Aid Coverage RETIREMENT ESOP: 5% Company paid contribution to our Employee Stock Ownership Plan 401K: 3% Company paid contribution 401K: 50% Company paid match up to the first 6% you contribute MONTHLY PROFIT-SHARING PROGRAM WORK / LIFE BALANCE - Paid Time Away from Work 15 Days Paid Time Off (PTO) your first year 9 Paid Holidays OTHER INSURANCE COVERAGE Group Term Life Short Term Disability (after 90 days) Long Term Disability (after 6 months) Voluntary Benefit package ADDITIONAL BENEFITS Tuition Reimbursement Safety Equipment (PPE) Reimbursement Years of Service Awards Equal Opportunity Employer /Veterans/Disability

Our client is a medical device company dedicated to offering innovative solutions for treatment of chronic heart failure. The Company's developments are based on its proprietary technology for administrating Cardiac Contractility Modulation therapy. Job Description Write and review of SOPs and other quality assiuance related technical data forms and quality documents proper maintenance of control documents in Quality Assurance Control documents to differents departments Review validation protocols for GMP compliance Assist in carrying out internal quality audits on company systems and documentations perform investigations on non-conformances and customer complaint close out and corrective actions Audit on-going vendors, systems and documents to assure quality assurance compliance with regard to all internal procedures as well as regulatory guidelines Provide GCP/ QA support and avdvice to internal and external clients Ensure the timely and effective follow up to all identified or assigned quality issues Maintains and demonstrates understanding of global standards, regulation and regulatory bodies to include but not limited to ISO13485, 21FR; part 820 AIMD Assist in the maintenance ogf Quality Management System under direction of Director, Quality Assurance Participate in Mock inspections for FDA inspection preparation Qualifications Ability to work independently with little or no supervision Exeptional oral and written communication capabilities Advance computer knowledge in MS Office programs Bachelors's Dregree in related field 4-6 years related experience Experience working in regulated environment with medical devices Experience with FDA inspections and /or Notified Bodies Audits desirable Additional Information All your information will be kept confidential according to EEO guidelines.

Since 1946, The Jet Pulverizer Company, Inc. has been committed to providing state-of-the-art processing equipment and services. The continuous technological advancement of our line of Micron-Master Jet Pulverizers and ongoing modernization and expansion of our Custom Grinding Division provide our customers with unsurpassed value and quality in both jet pulverizing equipment and custom grinding services. The Quality Technician plays a crucial role in ensuring the safety, quality, and compliance of products manufactured within our FDA-regulated micronization facility. This position involves monitoring production processes, conducting inspections, and collaborating with cross-functional teams to maintain high standards. Requirements Essential Duties of the QC Lac Tech: PRIORITY - Product sample testing as required Complete paperwork on a timely basis Create sample composites and retains as indicated by customer need Generate CoA's as required Stock sample cups and lids Monitor lab consumables and order as needed Maintain clean lab Monitor calibration status of instrumentation and calibrate as required Perform routine inspections of raw materials, intermediate products, and finished goods. Utilize precision measuring instruments and testing equipment to verify product specifications. Identify any deviations from quality standards and report findings promptly. Monitor micronization processes, including particle size reduction, blending, and packaging. Collect samples at various stages of production for analysis. Ensure adherence to standard operating procedures (SOPs) and regulatory guidelines. Maintain accurate records of inspections, test results, and corrective actions. Prepare quality reports and communicate findings to supervisors and management. Collaborate with the Quality Assurance team to address non-conformities. Assist during internal and external audits, including FDA inspections. Ensure compliance with cGMP (current Good Manufacturing Practices) and other relevant regulations. Support the implementation of quality management systems. Provide guidance on quality-related matters to colleagues. Foster a culture of quality awareness and accountability. Must be willing to work overtime as needed, including some mandatory weekend shifts. Experience/Skills HS Diploma required. Associate degree preferred. Computer proficiency - Microsoft Windows/Outlook, Microsoft Office 1 - 2 years lab experience Experience working in an FDA-regulated environment (pharmaceuticals, medical devices, or related industries). Proficiency in using measurement tools (calipers, micrometers, etc.) and analytical instruments. Knowledge of cGMP, ISO standards, and quality control principles. Strong attention to detail, problem-solving skills, and ability to work independently. Excellent communication and teamwork abilities. Salary Description $20 - $21 / hour

Job Description The Quality Assurance Associate, under the direction of the Chief Compliance & Quality Officer and working in cooperation with the Lead Quality Assurance Associate, utilizes a combination of excellent customer service, administrative, and analytical skills to ensure the agency can deliver high-quality client care services. This role is focused on investigating, managing, and resolving incidents that affect quality care. ESSENTIAL DUTIES AND RESPONSIBILITIES: 1. Conducts investigations for both the Personal Care and Developmental Care service lines. These investigations involve obtaining witness statements and interviews, securing evidence, retrieving information from electronic surveillance, reviewing staff schedules, compiling information from the agency's EHR system, and developing a chronological summary of factual findings from occurrence to closure. Depending on the incident, investigations may require traveling into the field to client homes to conduct investigations. (Coverage area: Philadelphia, Bucks, Montgomery, Delaware and Chester counties) 2. Completes and maintains Certified Investigator credential status from the PA Office of Development Program (ODP). Conducts investigations in accordance with ODP regulations. 3. Complies with required incident management reporting timeframes, ensuring investigations are filed, finalized or extended according to the timelines set forth by regulatory and agency standards to maintain speed, objectivity, and thoroughness. 4. Attends to all reportable data entry in the PA Enterprise Incident Management (EIM) System and documents all case activity for internal records. 5. Investigates potential fraud events and complaints involving client or caregiver safety. Makes recommendations for resolution, documents actions taken, and analyzes issues to prevent recurrence. 6. Provides education, guidance, and training to employees regarding incidents, complaints, and potential fraud events. 7. Engages in Administrative Reviews and Certified Investigation Peer Reviews to ensure processes meet regulatory standards. 8. Establishes rapport with staff, caregivers, clients, providers, families, and outside agencies to coordinate investigations. 9. Compiles, trends and reports quality data to analyze why incidents occur and how recurrences can be prevented. 10. Assists the Director of Quality & Clinical Management in the administration of the agency's quality improvement plans, infection control program, and accreditation standards. 11. Assists the Compliance Officer in monitoring the agency's compliance with regulatory mandates. Assists with the preparation of plans of correction for state surveys and auditing bodies. 12. Performs other duties as assigned by the Chief Compliance Officer. COMPLIANCE AS REQUIREMENT OF PERFORMANCE: Compliance with AmeriBest policies and procedures is a responsibility of all AmeriBest associates. It is a part of each associate's performance to follow these requirements: All associates are expected to participate in any investigatory activities All associates are expected to report any violation of AmeriBest policies and procedures All associates are expected to conduct themselves in an ethical manner consistent with the AmeriBest mission statement and Standards of Conduct All associates are expected to protect the privacy of protected records and must conduct themselves consistent with all applicable laws and policies regarding privacy protection, including HIPAA and state specific privacy laws COMPETENCIES/SKILLS: Planning/Organizing - Prioritizes and plans work activities; Uses time efficiently. Process Building - seeks to develop better efficiencies in agency processes. Actively engages in the use of technology to automate and enhance day-to-day workflows. Problem solving - effective at identifying root causes and creative solutions to issues. Analytical - strong quantitative and analytical skills. Apply critical thinking to make informed, data driven decisions. Teamwork - ability to work effectively as part of a team Communication - Communicates effectively and concisely; Strong ability to create effective visual summations of data. Customer focused - strong customer service skills, able to deal with people in a polite and caring manner. Strong Computer Proficiency- Uses Microsoft 365 applications with proficiency. Intermediate to advanced skillset preferred in Word, Excel, Forms, and PowerPoint, Familiarity with EMR and data repository systems. Some Clinical Knowledge- Knowledge of medical terminology, familiarity with medical notes and discharge reports, and common chronic illnesses. Attention to Detail with Quality Focus. Deadline Oriented EDUCATION AND/OR EXPERIENCE: A bachelor's degree in social work, behavior sciences, human services, or a related field. At least one (1) years' experience in home care, social work, case management, or hospital discharge planning. PREFERRED EXPERIENCE: Associates Degree Prior experience working for a Home Health Care Agency One (1) year of experience in a healthcare organization ADDITIONAL REQUIREMENTS: Must have and maintain a valid Driver's License, a good driving record, maintain automobile insurance coverage, and have access to a reliable automobile. Ability to work occasional evenings and weekends to conduct investigations in client homes. Currently hold a PA-Office of Development Program (ODP) Certified Investigator certificate or must successfully complete this certification within 12 months of hire. PHYSICAL DEMANDS: Regular requirement to sit; use hands to touch, handle or feel. Regular requirement to stand; kneel, squat, walk and reach with hands and arms. Occasional requirement to lift and/or move up to 10 pounds. Vision abilities include close vision, peripheral vision, depth perception and the ability to adjust focus. Able to travel throughout Philadelphia and surrounding counties and enter clients' homes. WORK ENVIRONMENT: Location: In-office position (Philadelphia office) Business Office Environment The noise level is usually moderate Local travel to client homes in the five county Philadelphia area Benefits: PTO Medical, Dental, and Vision Insurance 401(k) and HSA AmeriBest Home Care is an equal opportunity employer. We value and encourage diversity in our workforce and provide equal employment opportunities to all individuals protected by applicable laws.

Job Description The Quality Technician's role will be seen as pivotal in our efforts to drive at-source quality at ALMAG. The role requires the individual to support new product introduction, provide quality training, support, and to work collaboratively with various teams to develop standard work and ensure compliance. DUTIES AND RESPONSIBILITIES The quality technician's primary responsibility is to positively support the various departments in assuring that the requirements of the customer and quality management system are being met throughout each department. Additionally, the quality technician contributes to the continuous improvement of Almag's quality system. The duties and responsibilities of the Quality Technician are detailed below, but not limited to the following: Supporting the New Product Introduction process by assuring new customer requirements are understood and achieved. Responsible for performing audits of various departments to ensure that the QMS requirements are being met. Communicate new product status, its performance based on data, and provide samples and feedback to the respective departments with continuous improvement approach in mind. Responsible for collecting samples as required for various customer and internal requirements. Responsible for tracking and supporting Quality Containment processes for nonconforming product in all departments. Responsible for supporting production team in achieving customer requirements through training, auditing, and development of standard documents. Provide direction and support to any special sorting if needed, with the focus on accuracy and efficiency of sorting. Perform product testing for mechanical properties. Support team lead and shift supervisors to determine criteria for acceptance or rejection when there is uncertainty. Provide direction to the team if clarification is required for WO notes or requirements. Perform other related duties as assigned. Requirements MINIMUM QUALIFICATIONS Education/Experience At least 3 years' experience in quality, working in manufacturing environment. ASQ Certified Quality Technician (CQT) would be an asset. Certified Internal Auditor would be an asset. Technical Skills/Competence Excellent teamwork and collaboration across departments and within teams Work Efficiently Flexibility/Adaptability to meet customer business requirements. Communicate clearly and effectively, verbally and in writing. Must be able to read and understand engineering drawings. Basic knowledge of GD&T would be an asset. Ability to work and make decisions independently. Good mechanical aptitude and attention detail. Must be competent in the use of measuring instruments i.e. Calipers, micrometers. Basic proficiency with MS-office (Excel, Word, PowerPoint). Fork Lift Certified Benefits Profit Sharing Education Assistance Program Social Events Safety Shoe and Glasses Allowance Internal Growth and Development Health and Dental Life and AD&D Vision Critical Illness Insurance Long Term Disability

Proven is an interactive design and development consultancy that blends creative vision with technical expertise to craft digital experiences that matter. We partner with non-profits and mission-driven organizations, leveraging our design, engineering, and strategic capabilities to drive meaningful impact. We're looking for a full-time Quality Assurance Associate to serve as the primary owner for quality assurance across our projects. In this role, you will design and execute test strategies and plans for web applications, working within an Agile framework and collaborating closely with project managers, developers, and clients. You will help ensure that every release meets both functional requirements and Proven's high quality standards. Key Responsibilities Lead and track all QA activities across assigned projects. Create, execute, and maintain test plans and test cases based on user stories, acceptance criteria, and requirements. Perform functional, system, integration, regression, and performance testing to ensure consistency and reliability across environments and systems. Identify, prepare, and manage test data for manual and (when applicable) automated testing. Collaborate with clients and internal teams to define, refine, and validate user acceptance criteria. Validate all tickets resolved by the development team prior to release, ensuring they meet requirements and are production-ready. Automate regression test scripts where appropriate and help evolve our automated testing coverage and standards. Identify, document, and prioritize defects; track them through resolution. Proactively surface risks, dependencies, and quality concerns to the project manager and team. Contribute to improving QA processes, tools, and documentation over time. Qualifications and Experience You are hyper-organized, detail-oriented, and comfortable independently owning your work to ensure quality and client satisfaction. 3+ years of experience working in a QA or testing role at a technology company, digital agency, or similar environment. Experience working as a tester on technical projects within an Agile software development lifecycle. Hands-on experience with several of the following: Functional and regression testing System and integration testing Performance, load, and speed testing User acceptance testing (UAT) Working knowledge of modern web development technology stacks (e.g., common front-end frameworks, APIs, CMS platforms) and how they impact testing. Strong analytical and problem-solving skills; you can not only find bugs, but also help the team understand impact and potential root causes. Excellent written and verbal communication skills; you're comfortable collaborating with cross-functional teams and interacting with senior stakeholders. Experience working remotely with distributed teams. Bachelor's degree in engineering, computer science, or a related field, or equivalent relevant experience. Why Join Proven? Mission-Driven Work: Help organizations that make a real impact in the world. Collaborative Culture: Work alongside talented designers, strategists, and engineers. Growth Opportunities: Shape the future of Proven's technology team and strategy. Remote Flexibility: Work from anywhere while leading a distributed team. If you're a technology leader who is passionate about building teams, driving innovation, and delivering impactful digital experiences, we'd love to hear from you.

**Senior Technician, Quality Control** **Princeton NJ, US** **On-Site** The Senior Technician, Quality Control drives product quality by executing advanced laboratory testing, analyzing results, and managing deviations to ensure compliance with internal and external standards. Applies deep technical expertise to uphold product safety, reliability, and regulatory alignment. Actively contributes to departmental goals in safety, health, environment, and quality, reinforcing customer trust and operational excellence. **Your key responsibilities** + Perform Lab Tests: Independently perform routine and non-routine quality control tests using various analytical and instrumental methods, ensuring accuracy and compliance with specifications. + Data Integrity & Documentation: Validate and document test results with precision, perform plausibility checks, and ensure timely and accurate data entry into designated systems. + Deviation Management: Identify, report, and process quality-related deviations (e.g., OOS) in accordance with established protocols. + OOS Investigation: Conduct initial laboratory investigations for out-of-specification results, ensuring compliance with execution protocols. + Escalate Issues: Identify recurring problems and escalate them to the appropriate person or team. + Equipment Ownership: Maintain responsibility for assigned laboratory instruments, including calibration, basic maintenance, and adherence to GMP and safety standards. **We bring** + Empowerment to make meaningful contributions while upholding ethical standards. + Recognition and celebration of your efforts and accomplishments. + Opportunities for growth and advancement for those who embrace innovation and take initiative. + Collaboration with experts in health, nutrition, and beauty to drive progress. + Customer-first approach, working with world-renowned brands to turn ideas into impactful solutions. + Opportunity to build a career making a significant impact on billions of lives, with the freedom to shape your own path. + Dedication to creating better futures for customers, communities, people, and the planet. + Responsibility and accountability in living company values and driving sustainable solutions. + Supportive environment where individuals are empowered to progress and contribute to meaningful change. **You bring** + Bachelor's degree in Science, or a related field preferred. + 3-5 years of experience in quality control. + Fluency in local language a requirement, other languages encouraged. The salary provided reflects the pay range dsm-firmenich expects to pay the successful candidate for the position. Individual pay offered will be based on the applicant's job-related skills, experience, relevant education, or training, and primary work location. $60,000-80,000 In addition to base salary, we also offer a comprehensive total rewards package, inclusive of annual incentive pay, a retirement savings plan, health care coverage, paid time off, recognition programs and a broad range of other benefits. All benefits and incentives are subject to eligibility requirements. **About dsm-firmenich** At dsm-firmenich, we don't just meet expectations - we go beyond them. Join our global team powered by science, creativity, and a shared purpose: to bring progress to life. From elevating health to making fortified food and sustainable skincare, the impact of your work here will be felt by millions - every single day. Whether it's fragrance that helps you focus, alternative meat that's better for the planet, or reducing sugar without losing flavor, this is where you help shape the future of nutrition, health, and beauty for everyone, everywhere. And while you're making a difference, we'll make sure you're growing too. With learning that never stops, a culture that lifts you up and the freedom to move across businesses, teams, and borders. Your voice matters here. And your ideas? They're essential to our future. Because real progress only happens when we **go beyond, together** . **Inclusion, belonging and equal opportunity statement** At dsm-firmenich, we believe being a force for good starts with the way we treat each other. When people feel supported, included, and free to be themselves, they do their best work - and that's exactly the kind of culture we're building. A place where opportunity is truly equal, authenticity is celebrated, and everyone has the chance to grow, contribute, and feel they belong. We're proud to be an equal opportunity employer, and we're serious about making our hiring process as fair and inclusive as possible. From inclusive language and diverse interview panels to thoughtful sourcing, we're committed to reflecting the world we serve. We welcome candidates from all backgrounds - no matter your gender, ethnicity, sexual orientation, or anything else that makes you, you. And if you have a disability or need any support through the application process, we're here to help - just let us know what you need, and we'll do everything we can to make it work. **Agency statement** _We're managing this search directly at dsm-firmenich. If you're applying as an individual, we'd love to hear from you. We're not accepting agency submissions or proposals involving fees or commissions for this role._

Job Description An independent, family-owned business in Philadelphia, I. Rice & Co. has been making quality food products and flavors since 1884. With considerable growth and expansion, we are looking for qualified employees to help in a variety of positions. As a food manufacturing plant, I. Rice & Co. offers a diverse range of employment opportunities, from production coordination to warehouse stocking and inventory organization. With a passionate community, competitive pay, and generous bonus incentives, I. Rice offers ample opportunity for personal and professional growth. QUALITY CONTROL SENIOR LAB TECHNICIAN This permanent, full-time position supports the Quality Assurance department. The Senior Lab Technician plays a critical role in maintaining and enhancing our commitment to food safety and quality. This hands-on position combines technical expertise with leadership, performing daily functions in the lab, while also supporting the Director of Quality Assurance with administering department operations, validating program CCPs, and participating in audits. Knowledge of laboratory principles is required. Product testing includes brix, pH, water activity, titrations, viscosities and organoleptic evaluations. Environment is a clean and modern lab working with terrific people. Essential Job and Duties - Perform analytical tests on raw materials and finished products - Maintain extensive record keeping - Assist with auditing and maintaining SQF, GMP, & HACCP programs at the plant - Calibrate laboratory equipment - Participate in company audits - Work with production to make adjustments to batches in order to adhere to product specifications - Run batch freezer to make finished product for further study and sensory evaluation - Measure and verify raw materials needed for batching - Respond to customer questions or concerns in a professional and appropriate manner - Inspection of inbound receipts - Maintain the finished goods retention library - Sample finished product for microbial analysis - Maintain raw material specification documentation and product specification documentation - Maintain finished product specification documentation This position is supported by a team of technicians performing similar tasks. Our products, equipment, and methods are continually evolving. The duties associated with this position will change and evolve as needed. This individual is required to be willing and able to take on new responsibilities as needed. Education and Experience - Bachelor's Degree in Food Science, R&D, or related course of study preferred - 5 years of related quality assurance or lab experience - Experience with FDA, USDA, GFSI, SQF, FSMA, GMP, GLP, HACCP preferred Skills and Expectations - Ability to prioritize and organize ones work load - Ability to work in a team environment as well as individually in an environment with changing priorities - Comfortable working on an active busy production floor among batching and packaging equipment. - Ability to manage time effectively - Maintain proper lab conditions and equipment maintenance - Maintain proper record keeping and perform data entry - Be capable of working in various work settings of the facility including laboratory, office and plant areas - Perform basic math skills - Proficient computer skills, including above average knowledge of MS Excel - Understand and perform scaling/measuring in standard and metric formats - Food industry experience preferred. - Lifting and carrying up to 50 pounds - Being able to withstand extended periods of time on one's feet - Working and walking in a wet environment Benefits Benefits and Compensation - Weekly pay with direct deposit - Health insurance - Various supplemental insurance policies available after 90-day introductory period - Life insurance available after completion of 90-day introductory period - 401-K retirement plan available after one year of employment - Option to participate in uniform program - Annual bonus incentives I.Rice is an equal opportunity employer and derives our staff skills through a diverse and talented workforce. This person will work closely with all departments and persons in our facility and must conduct themselves professionally at all times.

Job Description Date 06/2025 Title Associate, In-Process Quality Assurance MFG/PKG Department Quality Assurance Operation Support Reports to Quality Assurance Manager/ VP of QA FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The IPQA performs line inspection as part of the cGMP, SOPs, and policy compliance requirements as per CFR part 111. Performs In-process quality testing in manufacturing and/or packaging areas according to prescribed timelines and accurately captures test results in batch records. The Inspector performs calibrations & measurements on raw materials, bulk products, finished products and packaging components as required in batch records and SOP's. This position reports to the QA Manager and is a key member of the Quality Assurance group. The IPQA Associate is a highly organized self-starter who can work independently, demonstrates a positive attitude, and a bias for action. Areas of Responsibility IPQA - Level 1: To support In-process quality assurance activities by performing routine checks and verifications during manufacturing and/or packaging of nutraceutical products. This role ensures that all processes comply with applicable GMP, SOPs, and regulatory requirements. Key Responsibilities: 🔹 Manufacturing Support Perform line clearance before starting blending, granulation, compression, encapsulation, coating processes. Perform In-process checks: Blend uniformity sampling Tablet/capsule weight variation Hardness, friability, and disintegration tests etc as applicable Verify equipment cleaning and area hygiene as per SOP. Collect and label In-process and stability samples under supervision. 🔹 Packaging Support Ensure line clearance before packaging activities. Perform In-process checks: Batch number and expiry date printing Label application and carton sealing Primary and secondary packaging integrity etc as applicable Assist in reconciliation of packaging materials (e.g., printed cartons, leaflets, labels). 🔹 Documentation Record observations in IPQA checklists, logbooks, and batch records. Maintain GMP documentation in real-time (legible and error-free). Escalate any deviation or abnormality immediately to the QA Executive/Supervisor. 🔹 Compliance & Safety Adhere to company GMP, SOP, and Hygiene policies. Use PPE appropriately. Support during internal/external audits by providing necessary records. Cleans up work following the completion of a shift. Meets all safety expectations and follows all safety practices. Works extended hours and occasional weekend overtime. Other duties as assigned Other Responsibilities Including Safety: IPQA - Level 2: To independently perform and document In-process quality assurance activities at all critical stages of manufacturing and packaging of nutraceutical products, ensuring compliance with GMP, SOPs, and regulatory requirements. Key Responsibilities: 🔹 Manufacturing Stage (Granulation, Blending, Compression, Encapsulation, Coating ) Carry out and document line clearance activities before starting each manufacturing batch. Conduct in-process checks independently: Blend uniformity sampling Tablet/capsule weight variation Hardness, friability, thickness, and disintegration In-process controls as per BMR specifications Verify equipment cleanliness status, calibration, and logbook entries. Monitor and record environmental conditions in production areas (temperature, RH, differential pressure). 🔹 Packaging Stage Conduct line clearance for primary and secondary packaging (bottles, strips, blister, cartons). Perform and document: Batch coding verification (batch no., Mfg/Exp date) Packaging material correctness (labels, leaflets, cartons) Sealing integrity checks (blisters, induction seals) Online rejection bin and reconciliation checks Ensure correct usage of approved packaging materials with status labels. 🔹 Documentation & Compliance Fill Batch Manufacturing Records (BMR) and Batch Packaging Records (BPR) in real-time. Record IPQA observations and results as per SOPs ( legible and error free). Initiate and report deviations, OOS/OOT, and non-conformities to QA Supervisor/ Manager. Support CAPA implementation and change controls. 🔹 General QA Duties Ensure compliance with GMP, GLP, and data integrity principles. Follow gowning protocols, hygiene, and safety measures in production areas. Assist during internal audits and regulatory inspections by providing accurate documentation and data. Cleans up work following the completion of a shift. Meets all safety expectations and follows all safety practices. Works extended hours and occasional weekend overtime. Other duties as assigned Other Responsibilities Including Safety: IPQA - Level 3: To lead and monitor In-process QA activities during nutraceutical manufacturing and packaging operations. Ensure compliance with GMP, regulatory standards, and internal SOPs by supervising IPQA teams, reviewing records, and addressing quality deviations. Key Responsibilities: 🔹IPQA Oversight - Manufacturing & Packaging Supervise and verify line clearance activities across all manufacturing and packaging areas. Ensure compliance with critical process parameters (CPPs) and critical quality attributes (CQAs). Review and approval: In-process checks: weight variation, hardness, friability, disintegration etc as applicable Environmental monitoring records Equipment and area cleaning records Coordinate and monitor sampling activities for In-process, finished products and stability studies. 🔹 Review and Verification Review and verify completed Batch Manufacturing Records (BMR) and Batch Packaging Records (BPR). Cross-check reconciliation of raw materials and printed packaging materials. Verify proper use of status labels (approved/rejected/quarantine). 🔹 Deviation & CAPA Management Investigate and document process deviations, non-conformances, and OOS/OOT incidents. Lead root cause analysis (RCA) and implement Corrective and Preventive Actions (CAPA). Coordinate with cross-functional teams (Production, QC, Regulatory Affairs) to ensure closure of quality events. 🔹 Audit & Compliance Ensure readiness for internal, external, and regulatory audits (FSSAI, WHO-GMP, USFDA, etc.). Conduct routine GMP audits, spot checks, and area inspections. Train shop-floor personnel on data integrity, documentation practices, hygiene, and gowning protocols. 🔹 Team Coordination Guide and mentor IPQA Level 1 and Level 2 personnel. Allocate daily QA responsibilities and monitor adherence to QA procedures. Conduct on-the-job training for new team members Cleans up work following the completion of a shift. Meets all safety expectations and follows all safety practices. Works extended hours and occasional weekend overtime. Other duties as assigned Other Responsibilities Including Safety: Meets all safety expectations and follows all safety practices. Works extended hours and occasional weekend overtime. Other duties as assigned Other Responsibilities Including Safety: N/A Other Responsibilities Including Safety: Works in a safe and responsible manner to create an injury-free and incident-free workplace. Complies with all job-related safety and other training requirements. Keeps management informed of area activities and of any significant problems. Requirements Education & Qualification: IPQA - Level 1: 0-1 year (Freshers with training or internship in QA preferred) Or equivalent combination of education and experience. High School diploma is required; BS degree in a life science discipline (e.g., Chemistry, Microbiology, Biochemistry) a plus. IPQA - Level 2: Minimum of 3+ years of experience in a QA Inspector within a nutritional's supplements, food, consumer products or pharmaceutical company. Or equivalent combination of education and experience. BS degree in a life science discipline (e.g., Chemistry, Microbiology, Biochemistry) a plus. IPQA - Level 3: 3-5 years in IPQA or related QA roles in nutraceuticals, pharmaceuticals, or food manufacturing. Or equivalent combination of education and experience. BS degree in a life science discipline (e.g., Chemistry, Microbiology, Biochemistry) a plus. Certifications, Licenses, Credentials: N/A Skills & Ability IPQA - Level 1: Basic understanding of GMP, nutraceutical processes, and QA principles. Good observation and attention to detail. Willingness to work in production areas (shifts, growing zones). Ability to follow instructions and standard procedures accurately. Basic proficiency in English and documentation practices. IPQA - Level 2: Strong knowledge of IPQA functions, SOPs, and process flow in nutraceuticals. Understanding of basic analytical parameters (weight variation, friability, etc.). Good documentation and observational skills. Proficient in using basic lab and QA tools (weighing balances, disintegration testers). Familiar with regulatory guidelines (FSSAI, WHO-GMP, USFDA, HACCP). IPQA - Level 3: In-depth understanding of nutraceutical manufacturing processes and regulatory compliance. Proficient in QA documentation, process audits, and deviation handling. Strong analytical and decision-making skills. Familiar with QMS tools, GMP documentation, and data integrity principles. Working knowledge of SOP writing, change control, and risk assessment. Physical Requirements (lifting, etc.): Ability to lift up to 35 lbs.; occasionally lift and move up to 50 pounds. Must stand and walk on production floor a minimum of 6 hours per shift Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from waist, or squatting, walking short distances. Occasionally works from a rolling ladder or step stool. Must be able to wear all PPE including lab coat, face mask, booties, gloves, safety glasses. Work Environment (Office, Warehouse, temperature extremes, etc.): Work is regularly performed inside a manufacturing and packaging environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. shift schedule 1st shift: 7:00 AM - 3:30 PM,2nd shift: 3:15 PM - 11:45 PM and 3rd shift: 11:00 PM - 7:30 AM

Full-time Description Since 1946, The Jet Pulverizer Company, Inc. has been committed to providing state-of-the-art processing equipment and services. The continuous technological advancement of our line of Micron-Master Jet Pulverizers and ongoing modernization and expansion of our Custom Grinding Division provide our customers with unsurpassed value and quality in both jet pulverizing equipment and custom grinding services. The Quality Technician plays a crucial role in ensuring the safety, quality, and compliance of products manufactured within our FDA-regulated micronization facility. This position involves monitoring production processes, conducting inspections, and collaborating with cross-functional teams to maintain high standards. Requirements Essential Duties of the QC Lac Tech: PRIORITY - Product sample testing as required Complete paperwork on a timely basis Create sample composites and retains as indicated by customer need Generate CoA's as required Stock sample cups and lids Monitor lab consumables and order as needed Maintain clean lab Monitor calibration status of instrumentation and calibrate as required Perform routine inspections of raw materials, intermediate products, and finished goods. Utilize precision measuring instruments and testing equipment to verify product specifications. Identify any deviations from quality standards and report findings promptly. Monitor micronization processes, including particle size reduction, blending, and packaging. Collect samples at various stages of production for analysis. Ensure adherence to standard operating procedures (SOPs) and regulatory guidelines. Maintain accurate records of inspections, test results, and corrective actions. Prepare quality reports and communicate findings to supervisors and management. Collaborate with the Quality Assurance team to address non-conformities. Assist during internal and external audits, including FDA inspections. Ensure compliance with cGMP (current Good Manufacturing Practices) and other relevant regulations. Support the implementation of quality management systems. Provide guidance on quality-related matters to colleagues. Foster a culture of quality awareness and accountability. Must be willing to work overtime as needed, including some mandatory weekend shifts. Experience/Skills HS Diploma required. Associate degree preferred. Computer proficiency - Microsoft Windows/Outlook, Microsoft Office 1 - 2 years lab experience Experience working in an FDA-regulated environment (pharmaceuticals, medical devices, or related industries). Proficiency in using measurement tools (calipers, micrometers, etc.) and analytical instruments. Knowledge of cGMP, ISO standards, and quality control principles. Strong attention to detail, problem-solving skills, and ability to work independently. Excellent communication and teamwork abilities. Salary Description $20 - $21 / hour

The Quality Technician's role will be seen as pivotal in our efforts to drive at-source quality at ALMAG. The role requires the individual to support new product introduction, provide quality training, support, and to work collaboratively with various teams to develop standard work and ensure compliance. DUTIES AND RESPONSIBILITIES The quality technician's primary responsibility is to positively support the various departments in assuring that the requirements of the customer and quality management system are being met throughout each department. Additionally, the quality technician contributes to the continuous improvement of Almag's quality system. The duties and responsibilities of the Quality Technician are detailed below, but not limited to the following: Supporting the New Product Introduction process by assuring new customer requirements are understood and achieved. Responsible for performing audits of various departments to ensure that the QMS requirements are being met. Communicate new product status, its performance based on data, and provide samples and feedback to the respective departments with continuous improvement approach in mind. Responsible for collecting samples as required for various customer and internal requirements. Responsible for tracking and supporting Quality Containment processes for nonconforming product in all departments. Responsible for supporting production team in achieving customer requirements through training, auditing, and development of standard documents. Provide direction and support to any special sorting if needed, with the focus on accuracy and efficiency of sorting. Perform product testing for mechanical properties. Support team lead and shift supervisors to determine criteria for acceptance or rejection when there is uncertainty. Provide direction to the team if clarification is required for WO notes or requirements. Perform other related duties as assigned. Requirements MINIMUM QUALIFICATIONS Education/Experience At least 3 years' experience in quality, working in manufacturing environment. ASQ Certified Quality Technician (CQT) would be an asset. Certified Internal Auditor would be an asset. Technical Skills/Competence Excellent teamwork and collaboration across departments and within teams Work Efficiently Flexibility/Adaptability to meet customer business requirements. Communicate clearly and effectively, verbally and in writing. Must be able to read and understand engineering drawings. Basic knowledge of GD&T would be an asset. Ability to work and make decisions independently. Good mechanical aptitude and attention detail. Must be competent in the use of measuring instruments i.e. Calipers, micrometers. Basic proficiency with MS-office (Excel, Word, PowerPoint). Fork Lift Certified Benefits Profit Sharing Education Assistance Program Social Events Safety Shoe and Glasses Allowance Internal Growth and Development Health and Dental Life and AD&D Vision Critical Illness Insurance Long Term Disability