Quality assurance technician jobs in Tyler, TX

The perks of working here We're committed to providing our employees with meaningful benefits and real opportunities. Good Benefits including: Medical Dental (with orthodontic) Disability Vision Life insurance 401K with company match Attendance Bonuses Merit Increases Paid Time Off (PTO) and Paid Holidays Growth opportunities in a stable and safe work environment Collaborative and positive team culture Responsibilities Revolution is hiring a Quality Assurance Technician for the night shift at its Kilgore, TX facility. This is a 12 hour rotating shift schedule from 7:00 pm - 7:00 am.This position will work closely with production lines to ensure the facility meets quality standards. • Inspect product to verify compliance with known specifications (all departments) • Correctly input data into computer system • Interpret test data as pass or fail • Handle quality issues with peers and departmental supervision during shift • Be proactive in addressing quality issues and provide feedback in a timely manner • Assure that raw materials are within tolerance • Write and place non-conforming material on hold • Perform Layered Process Audits throughout the plant • Perform measurement studies • Write/update Standard Operating Procedures (SOP's) • Find Continuous Improvement Ideas in the plant • Effectively communicate with department Managers, Supervisors and Leads Qualifications High School diploma 2 year college degree preferred 1 - 2 years of Quality experience in an industrial environment preferred. Necessary math skills - Addition, subtraction, and multiplication to record accurate reports. Must be able to read and write. Experience with automated manufacturing equipment preferred. Periodically lift and carry up to 30 lbs. Must be able to stand and walk for 8-12 hours. Ability to work 12-hour shifts. Must be able to read a tape measure Must be able to spot defects that could occur in each department Must be able to write neatly and legibly Must be able to distinguish between slight color variations Able to read, understand and verify all information on spec sheets. Must be detail-oriented and possess a pride of workmanship Demonstrate basic math skills Must have adequate computer skills…Word, Excel, PowerPoint Capable of working without supervision Capable of interaction with management and peers ABOUT REVOLUTION It's time to redefine possible. At Revolution, we exist to empower businesses and consumers to contribute to a better future through sustainable loop plastic solutions. Our unique, circular approach results in sustainable products and services that effectively meet the needs of businesses today, while helping prepare them for tomorrow. And we're just getting started. Learn more at revolutioncompany.com. Revolution welcomes diversity and is An Equal Opportunity/Affirmative Action Employer - Minority / Women / Disability / Veteran and other protected categories are always encouraged to apply. #operation #operator #recycling #plastics #manufacturing #reclaim #plantworker #production #extrusion #bags #plasticbags #xtrusion #bags #plasticbags PM20

Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets. **Factory Location** : Hawkins, TX **Compensation** : $23.67 / hour **Shift differential** : 6%-8% of base hourly rate paid for applicable hours worked **Schedule: 5** :00pm - 5:30am on a 3-1-3 rotation Ability to work holidays and weekends per business needs Responsibilities + Operate, changeover, clean, troubleshoot, and complete basic maintenance according to company standards on production equipment consisting of fillers, labelers, case packers, palletizers, blow mold machines, wrappers, and forklifts + Record the following: preventative maintenance activities, quality inspection data, equipment downtime, production output and other key metrics + Adhere to safe work practices, good manufacturing practices, and participate in safe behavior observation programs + Communicate effectively when issues arise that prevent operating to company standards/procedures + Meet or exceed performance metrics including efficiency, production, and downtime + Perform mathematical calculations as needed + Ensure quality product is sent to customers by completing hourly quality checks + Inspect raw materials against quality standards before loading them + Interact with team members from various departments (Quality Assurance, Maintenance, etc.) to maximize output and efficiency + Attend shift, team, and plant meetings during their scheduled times + Measure and continuously improve the line operation as a team and with other technicians + Crosstrain in other areas to support operations during downtimes + Maintain your workstation in an organized and clean manner ensuring safety and good manufacturing practices + Focus on safe work practices and high quality while executing duties with a sense of urgency Qualifications + High school diploma, GED or equivalent experience + Prior experience in clean manufacturing preferred + Ability to work the scheduled shift which includes start-up and handover meetings + Exposure to high-speed production and/or basic maintenance is preferred + Troubleshooting and root cause analysis experience + Ability to work on your own and with a team + Strong communication skills both face to face and over the radio + Computer skills with knowledge of Microsoft applications, SAP experience a plus + Forklift experience is preferred, but we are able to train new associates + Ability to lift and move 50 lbs. and stand on your feet for extended periods of time throughout the day + Ability to work in adverse environmental conditions, including inclement weather and changes in temperature _Seasonal assignments offer valuable work experience at a leading beverage company. Also, if opportunities exist at the end of the assignment, you can be considered for this position with Primo Brands. Individuals in temporary and seasonal assignments are not eligible for all company benefits._ Primo Brands' established portfolio includes billion-dollar brands Poland Spring and Pure Life , premium brands like Saratoga and Mountain Valley , regional leaders such as Arrowhead , Deer Park , Ice Mountain Ozarka , and Zephyrhills , purified brands, Primo Water and Sparkletts , and flavored and enhanced brands like Splash and AC+ION . Our extensive direct-to-consumer offerings and industry-leading line-up of innovative water dispensers create consumer connectivity through recurring water purchases across Water Direct, Water Exchange, and Water Refill. At Primo Brands, our more than 11,000 associates are at the heart of what we do and deliver on our mission to provide healthy hydration to consumers wherever, however and whenever they want it. We believe in fostering a respectful culture, which values our associates who are deeply invested in quality hydration, our communities, and the sustainability of our packaging and water sources for generations to come. Primo Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law. Candidates must possess strong English language skills to effectively communicate with customers and provide exceptional service. Proficiency in English is essential for understanding customer needs, resolving inquiries, and collaborating with team members.

Job DescriptionPosition Description: ITLE: Quality Control Inspector DEPARTMENT (S): Telecom Wireline (Cable/Fiber) DIRECT REPORTs: N/A REPORTS TO: Construction ManagerDuration: Permanent, Full-TimePay Rate: $23-$28 per hourU. S Citizenship Required The Quality Control Inspector is experienced in fiber construction. They are responsible for conducting quality assurance inspections of underground and aerial work of in-house technicians and subcontractors, during and after completion of a project. ESSENTIAL JOB FUNCTIONS Ensures adherence to and demonstrates a sound understanding of safety best practices and regulations Coordinate inspection activities with crews, subcontractors, safety, and field management Understands the scope of work of each project Conducts quality assurance inspections during and after completion of work to ensure compliance with customer specific requirements Recognizes and escalates persistent quality or other observed issues that could impact the ongoing relationship between client and company. Utilizes and demonstrates proficiency with construction tasks, tools, test equipment and information that will enhance quality results. Enter inspection findings in established company database in accordance with policy and procedures. Communicate project status and any work/schedule changes with subcontractors, local municipalities, and homeowners Assist in the preparation of red line prints and as-builds Monitor and track completion of job sites Other duties as assigned SKILLS AND ABILITIESUnderstands aerial, underground, and splice test variants Knowledge of aerial and underground cable/fiber construction practices Ability to read and interpret CATV/Fiber design prints Knowledge of splicing Ability to manage workload in an effective and efficient manner Knowledge of local DOT work zone standards. Conflict resolution skills Utilizes their experience to mentor and educate crew members Computer experience in Microsoft Office Suite and with various other construction programs Excellent at relationship building Ability to communication with clarity at the frequencies required by management and customers Ability to travel to multiple sites as required Work independently with minimal supervision MINIMUM REQUIREMENTS10 plus years in construction with at least 5 years in a leadership role Valid drivers license and excellent driving record Must be able to pass a pre-employment drug test Must be able to pass a DOT physical High School Diploma or GEDPREFERRED REQUIREMENTSPermitting ExperienceBi-lingual (Spanish/English) Undergraduate degree CDL License $23. 00 - $28. 00 Hourly

Cath Lab Tech Location: Tyler, TX Agency: AMN Healthcare Allied Pay: $2,367 to $2,439 per week Shift Information: Days - 4 days x 10 hours Contract Duration: 13 Weeks Start Date: 1/5/2026 AlliedTravelCareers is working with AMN Healthcare Allied to find a qualified Cath Lab Tech in TYLER, Texas, 75701! Job Description & Requirements Cath Lab Technologist - (Cath Lab Tech) StartDate: 1/5/2026 Available Shifts: 10 D Pay Rate: $2367.00 - $2439.00 Required Qualifications Cath Lab Technologist, Cath Lab Experience: 1 year Licenses: CLT-TX(Copy needed) Certifications: CERT-ARRT- CI(Copy Needed); BLS-AHA(Copy Needed) SSN Required DOB Required Work History: Should not be more than 90 days of gap in last 1 year References: 2 References in the last 24 months Facility Location A city of about 100,000 residents located 100 miles southeast of the Dallas-Fort Worth metro area, Tyler, Texas is the self-called "Rose Capital of the World," where you'll find the largest rose garden in the United States. The economy of this civic-minded, family-friendly community is dominated by healthcare; Tyler is also the birthplace of the U.S. Adopt-a-Highway program and home to attractions like the Caldwell Zoo and Broadway Square Mall. Job Benefits Allied travel assignments are typically for 13 weeks and offer generous packages that include: Competitive pay rates Medical, Dental, Vision 401(k) and Flex Spending Life Insurance Accident and Short-term Disability Coverage Free Continuing Education Competitive Housing Deal Refer a friend and earn extra cash! About the Company At AMN Healthcare, we strive to be recognized as the most trusted, innovative, and influential force in helping healthcare organizations provide quality patient care that continually evolves to make healthcare more human, more effective, and more achievable. cath lab technologist, cardiac, invasive cardiac, diagnostic reports, cardiac cath lab, cath lab, allied, allied health, healthcare, health care, cath, catheterization, hospital, medical, patient care, RCVT, cath lab tech About AMN Healthcare Allied Embarking on an allied travel career with AMN Healthcare means a wealth of resources at your fingertips and a vast array of exciting opportunities across all allied healthcare disciplines, settings, and practice areas. Whatever your personal and professional goals are, AMN Healthcare is ready to build a partnership of success and match you with your dream allied travel assignment. Beyond high-paying travel jobs, you have access to exceptional benefits that prioritize your well-being and professional growth. We take pride in being the nation's leading allied staffing agency, ensuring top-tier assignments and unparalleled support for allied healthcare professionals nationwide. Requirements Cath Lab Technologist, Cath Lab Experience: 1 year Licenses: CLT-TX(Copy needed) Certifications: CERT-ARRT- CI(Copy Needed); BLS-AHA(Copy Needed) SSN Required DOB Required Work History: Should not be more than 90 days of gap in last 1 year References: 2 References in the last 24 months Benefits Allied travel assignments are typically for 13 weeks and offer generous packages that include: Competitive pay rates Medical, Dental, Vision 401(k) and Flex Spending Life Insurance Accident and Short-term Disability Coverage Free Continuing Education Competitive Housing Deal Refer a friend and earn extra cash! 11153743EXPPLAT

Medical Solutions is seeking a travel Cath Lab Technologist for a travel job in Tyler, Texas. Job Description & Requirements Specialty: Cath Lab Technologist Discipline: Allied Health Professional Duration: 13 weeks 36 hours per week Shift: 10 hours, days Employment Type: Travel We're seeking talented healthcare professionals whose adventure game is as strong as their clinical game. Those that want flexibility and high pay, we have the positions for you! Some of the industry-leading benefits enjoyed by Medical Solutions travel nurses and travel allied healthcare professionals include: Day One Medical, Dental, and Vision with low premiums Day One 401(k) with Company Contribution Personalized Compensation Packages Paid, Private, Fully Furnished, Pet-Friendly Housing Dedicated Recruiter and 24/7 Customer Care Line Per Diem Allowance and Paid Travel Licensure and Certification Reimbursement Free Liability Coverage Voluntary Benefits: Critical Illness, Hospital Indemnity, Accident, and Pet Insurance Equal Employment Opportunity And More! Estimated pay package based on bill rate at time job was posted. Bill rates can change frequently and without notice. Exact pay package may vary based on guaranteed hours, distance being traveled, and customizations available for travelers. Medical Solutions Job ID #1028179. Pay package is based on 10 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Cardiac Cath Lab About Medical Solutions At Medical Solutions, we're people who care, helping people who care. No matter how you look at it, there's a whole lot of care going on in our world and that's just the way we like it. What do we do? Medical Solutions is one of the nation's largest providers of total workforce solutions in the healthcare industry, connecting nurses and allied health clinicians with hospitals and healthcare systems across the country and around the corner. Through our family of brands, we also serve a segment of clients outside of the healthcare space. And we're the very best at what we do. You'll love our culture that's filled with heart and soul. As a company and employer, we're sincerely and unabashedly us. We lead as humans first and believe the unique qualities of each team member make us better together. We share a purpose for helping others and the drive to make a difference. And we offer endless opportunities for personal and professional growth, throughout your career. At Medical Solutions, you'll find a great place to work and a career home. We've received Best Places to Work awards, landed top industry awards, and received accolades for the impact we've made in business and within our community. But the only way to really get to know us, is to join us. We think you'll fit right in. Benefits Weekly pay Holiday Pay Guaranteed Hours Continuing Education 401k retirement plan Pet insurance Company provided housing options Cancelation protection Wellness and fitness programs Mileage reimbursement Referral bonus Employee assistance programs Medical benefits Dental benefits Vision benefits Benefits start day 1 License and certification reimbursement Life insurance Discount program

Founded in 1963, Townley Engineering & Manufacturing is a rapidly growing, American-made solutions expert for wear and abrasion problems found in the mining, dredging, and power industries. We have an opening for a Mfg Tech for our Rubber division. Responsibilities include: Collect raw material and fittings specified in work order Assemble rubberized fabric, rubber tubing, and gum rubber ply (layer) stocks to fabricate industrial hose Operate and monitor machinery involved in the manufacturing process of rubber hoses Conduct quality checks on produced products to ensure they meet specified standards Adhere to safety protocols and guidelines to maintain a safe working environment. Maintains a clean workstation and production floor. Collaborate with other team members to achieve production goals and resolve issues. Participates in ongoing on-the-job training to adhere to company policies. Requirements: Attention to detail- Strong focus on quality control and adherence to production specifications. Safety Awareness- Knowledge of safety protocols and commitment to maintaining a safe work environment. Team Player- Ability to work effectively in a team environment and communicate well with colleagues. Position works indoors and outdoors in varying climates Occasionally stoop, kneel and/or crouch Stand for long periods of time Ability to lift up to 50lbs unassisted Opportunities are limitless and demand for products is increasing. Join the team and be a part of our growing family. Townley Engineering & Manufacturing is an Equal Opportunity Employer/Veterans/Disabled. Townley Engineering & Manufacturing is a drug-free workplace. Candidates must be able to pass a post-offer / pre-employment drug screen and job-related employment physicals. Candidates must be legally authorized to work in the United States.

R10072750 Production Technician (Open) Air Liquide Large Industries provides our customers with industrial gas and energy solutions that are vital to their own industrial production. We own and operate over 2,000 miles of industrial gas pipelines in the U.S. supplying mainly oxygen, nitrogen, hydrogen and syngas in large quantities from multiple production sources to major customers in the chemicals, petrochemicals, refining and steel industries. Our pipeline operations and industrial gas production facilities are closely monitored 24/7 within our leading-edge operations control center located in Houston, Texas. Our operations control group monitors over 89,000 data points and assists with product supply and coordination. We are constantly optimizing our supply network to provide high reliability and energy efficiencies allowing Air Liquide to adjust supply needs more quickly and effectively enabling growth to our customers. How will you CONTRIBUTE and GROW?We are seeking a Production Technician to join our team. The successful candidate will be responsible for ensuring the safe and efficient operation of the plant's production processes. This includes monitoring equipment performance, troubleshooting issues, and implementing solutions to improve efficiency and productivity. Additionally, the Production Technician will play a crucial role in maintaining compliance with safety regulations and environmental standards. Responsibilities: • Monitor and control equipment performance during shift operations. • Troubleshoot and resolve technical issues related to production processes. • Implement process improvements to increase efficiency and reduce waste. • Conduct regular maintenance on equipment according to scheduled maintenance procedures. • Maintain accurate records of production data and equipment performance. • Collaborate with other departments to ensure smooth operation of the plant. • Adhere to all safety protocols and regulations to prevent accidents and injuries. • Ensure compliance with environmental standards and regulations. ____________________Are you a MATCH? Qualifications: • High school diploma or equivalent required, 2 year associates degree or certificate preferred. • Strong mechanical aptitude and understanding of industrial processes. • Experience working with heavy machinery and equipment. • Ability to work safely and follow established safety protocols. • Excellent problem-solving skills and attention to detail. • Effective communication and interpersonal skills. • Ability to lift up to 50 lbs and perform physically demanding tasks. • Availability to work flexible shifts, including nights, weekends, and on call as needed. Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. For more information you can go to Air Liquide Benefit Offerings The candidate must have valid unrestricted employment authorization in the U.S. and must not require visa sponsorship now or in the future. Our Differences make our Performance At Air Liquide, we are committed to build a diverse and inclusive workplace that embraces the diversity of our employees, our customers, patients, community stakeholders and cultures across the world. We welcome and consider applications from all qualified applicants, regardless of their background. We strongly believe a diverse organization opens up opportunities for people to express their talent, both individually and collectively and it helps foster our ability to innovate by living our fundamentals, acting for our success and creating an engaging environment in a changing world.

Hospitality Health ER is a freestanding ER in Tyler, TX that provides personal attention to all patients with first-class care. We pride ourselves on providing exceptional hospitality and customer service to everyone that enters our facility, going above and beyond the call of duty. We encourage a strong team environment, where our staff will step up to the plate during the busiest of times and lend a hand in whatever direction is needed. If you are looking to make a change in your career and be part of an exciting team, with endless possibilities for career growth, apply today! We are looking to fill positions immediately! Overview A freestanding ER in Tyler, TX is seeking a Laboratory Technician to join their team. The Laboratory Technician will strive to provide proficient, competent care while ensuring accurate results. Responsibilities for the Laboratory Technician Creating and maintaining a patient centered focus by engaging in a positive working relationship with all patients, visitor, and facility staff. Performing laboratory patient testing and reporting as assigned by the Laboratory Director in accordance with the Laboratory Procedure Manual. Identifying patients and labels specimens correctly and legibly according to departmental policies and procedures. Collecting appropriate specimens from patients ensuring that two patient identifiers are collected prior to collection and labeling at the patient's bedside. Preparing or instructing patients for specimen collection in age-appropriate dialog. Preparing specimens to be sent out to a reference laboratory. Following all laboratory safety policies and procedures as well as making all records and documents available for inspection by the Laboratory Director, Technical Consultant, or CLIS Inspectors. Running controls and documents as described in the QC Policy 12.01.2015. Calibrating all laboratory instruments in accordance with the Laboratory Policy and Procedure Manual. Maintaining all laboratory instruments as prescribed by the manufacturers and troubleshooting instrument failure according to the manufacturers troubleshooting procedures. Maintaining laboratory supply inventories and order/restock supplies as needed to ensure no disruptions are caused due to supply levels. Requirements and Qualifications for the Laboratory Technician Associate degree in laboratory science OR Bachelor's degree in chemistry or biology is required. ASCP Certified or equivalent Preferred. 1 year experience in a hospital setting Minimum. Knowledge of hospital laboratory practices, including infection control requirements Required . Knowledge of governmental and regulating policies and standards Required . Critical thinking skills, ability to work autonomously and make efficient use of time and resources. Must have a current driver's license with no restrictions. Must have the ability to be flexible and meet the scheduling demands of the department. Pay & Benefits Pay is commensurate with experience Night shift differential 401K with company match Additional benefits for full-time employees Job description statements are intended to describe the general nature and level of work being performed by employees assigned to this job title. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required. Hospitality Health ER is an equal opportunity employer inclusive of female, minority, disability and veterans, (M/F/D/V). Hiring, promotion, transfer, compensation, benefits, discipline, termination and all other employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, age, disability, national origin, citizenship/immigration status, veteran status or any other protected status.

Job Description About the Role We're seeking a Quality Technician to join our production team and help ensure every product meets the highest standards of food safety, legality, and quality. In this hands-on role, you'll be responsible for testing, inspecting, and validating processes and products at various stages of production, supporting a safe and compliant manufacturing environment. What You'll Do Conduct inspections of materials, equipment, and production processes to ensure compliance with quality standards. Perform foreign material detection challenges and equipment checks, as applicable. Carry out routine quality audits focused on housekeeping, GMPs, and prerequisite programs. Execute analytical testing on in-process and finished products following prescribed procedures. Validate analytical test methods and maintain accurate data entry in the quality database. Support and coach team members on GMP compliance and food safety practices. Maintain accurate and legible test records, ensuring proper document control and backup. Provide coverage and support for fellow Quality Technicians as needed (vacation, absences, etc.). Participate in continuous improvement initiatives aimed at enhancing quality systems and standards. Work flexible hours, including after-hours, weekends, and holidays as required. What You Bring Education: High school diploma or GED required. Associate or Bachelor's degree in a related field preferred. Experience: 3+ years of related laboratory or quality experience preferred. Knowledge of HACCP, GMPs, and FSSC standards is an asset. Proficiency in Microsoft Office (Word, Excel, PowerPoint, Teams). Experience with SAP or similar systems is an advantage. Requirements: Must be legally authorized to work in the United States. Skills & Attributes Strong attention to detail and accuracy in all documentation and testing. Solid understanding of quality systems, testing procedures, and production processes. Excellent written and verbal communication skills. Ability to work independently and collaboratively within cross-functional teams. Strong initiative and a proactive approach to identifying and solving problems. Familiarity with regulatory requirements (FDA, FSMA, HACCP). Work Environment Plant-based environment with exposure to temperature variations, moisture, and moving equipment. Frequent walking, standing, and reaching; occasional lifting of up to 50 lbs. Requires adherence to safety and EHS protocols at all times.

Cath Lab Tech PRN Here at Palestine Regional Medical Center we value our nurses and recognize their exceptional contributions to our patient's health and wellness. As part of our commitment to attracting the best talent, we offer increased pay rates that are highly competitive in the industry. As an RN on our team, you will have the chance to: * Make a real difference in the lives of our patients through the delivery of exceptional, personalized care. * Be part of a collaborative, professional environment where your opinions and expertise are valued. * Enjoy a flexible schedule that respects your work-life balance. * Receive competitive compensation that recognizes your skills and experience. We seek compassionate, qualified RNs who share our dedication to delivering outstanding patient care. If you are a passionate nurse wanting to join a dynamic team, we want to hear from you! Thank you, and we look forward to hearing from you! I've shared below our job description and minimum requirements to apply. The Cath Lab Technician is responsible for the care and safety of patient's undergoing procedures where radiation exposure is required for imaging studies. The tech will ensure that all proper shielding is utilized for both patient and staff safety. The tech is required to have a basic understanding of hemodynamics and a strong working knowledge of vascular anatomy. The tech must be able to work within a sterile environment and maintain competence in the use of all equipment and supplies relevant to the Cath Lab. Call status is required with a 30 minute response time. Qualifications Minimum Education Must posses a degree from an accredited school of Radiology or Cardiovascular Technology Required Licenses [United States] Radiologic Technologist and Technician ARRT or CVT Texas State: TMB - Registered Technologist BLS -- 3 months ACLS -- 6 months Minimum Work Experience Minimum 1 year. Previous Cath Lab experience preferred.

The Catheterization Laboratory Technologist I has a critical role in supporting cardiac catheterization procedures by preparing the lab and operating essential equipment, including fluoro imaging and digital image acquisition. This role ensures the accurate documentation of patient information and hemodynamic measurements, while also maintaining stringent aseptic technique and patient safety standards. The Technologist I actively collaborates with the medical team to optimize patient care and departmental efficiency, serving as the radiation safety representative during X-ray usage and continually developing proficiency in specialized cath lab technologies. Responsibilities: * Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders. * Promotes Organizational Principles of Catholic Healthcare; Solidarity, Holistic Care, Respect for Human Life, Participatory Community of Work and Mutual Respect, Stewardship, Act in communion with the Church. * Ensures major equipment is operational in assigned area(s) and documents as required for quality control; reports any issues through chain of command and per hospital process. * Participates in daily room checks and stocking of supplies. * Accesses daily patient schedule and appropriate patient information for assigned procedures. * Ensures appropriate equipment, supplies, and room configuration for all procedures. * Collaborates with procedure team and Cath Lab Lead/Coordinator to ensure appropriate patient care and departmental efficiency at all times. * Ensures proper patient information is entered into cath lab computer and imaging systems. * Ensures proper procedure documentation, hemodynamic measurements/recording, and ECG recognition during assigned procedures. * Ensures patient position is appropriate and safely secured on procedure table per procedure type. * Trains and completes competencies to set up and operate cath lab equipment including, but not limited to: Imaging (X-Ray, intravascular ultrasound-IVUS, intracardiac echo-ICE), contrast injector, hemodynamic system, intra-aortic balloon pump, rotational atherectomy, thrombectomy, left ventricular assist device, etc. * Supports and anticipates the needs of the physician and ensures patient safety when scrubbing procedures; moves/pans table appropriately during fluoro and X-Ray acquisition. * Adheres to aseptic technique 100% of the time during procedures and stops the line if a break in sterile technique is identified. * Adheres to organizational policies and processes related to patient safety, patient privacy, infection control (hand hygiene), and patient communication before, during, and after procedure. * Collaborates with others on the team in sharing knowledge; to gain and provide appropriate knowledge as appropriate; to foster teamwork and team cohesion. * Supports department and team by engaging in patient transport as appropriate. * Obtains and maintains proficiency in access site management. * Acts as radiation safety representative for patients and team while X-Ray is used. * Performs fluoro imaging and digital image acquisition as appropriate for procedure or as instructed by the physician. * Adheres to the attendance policy and departmental productivity standards. * Supports department and organization's commitment to Zero Harm and Customer Service. * Adheres to departmental and organizational dress code. * Understands and upholds the CHRISTUS mission, vision, and purpose. * Supports and promotes Unit based Councils, process improvement projects, and a nursing collaborative care model that meets requirements for magnet status. * Promotes and serves with respect to the CHRISTUS core values; Dignity, Integrity, Excellence, Compassion, Stewardship. Requirements: Education/Skills * Graduate from an accredited school of Radiology Technology, an associate's degree in a healthcare-related field, or an acceptable equivalent required * Bachelor's degree preferred Experience * 0-1 year of experience in an acute care setting preferred Licenses, Registrations, or Certifications * Basic Life Support (BLS) certification is required * Advanced Cardiovascular Life Support (ACLS) certification is required within 6 months of hire to work/perform independently * Pediatric Advanced Life Support (PALS) certification is required within 6 months of hire to work/perform independently at Pediatric facilities * One of the following certifications is preferred (individuals whose ARRT certification lapsed prior to June 1, 2023, may qualify under LSRTBE exemption criteria): * Registered Cardiovascular Invasive Specialist (RCIS) BY CCI * Registered Cardiac Electrophysiology Specialist (RCES) by CCI * Registered Cardiac Sonographer (RCS) by CCI * Radiography (R) by ARRT * Cardiac Interventional Radiography (CI) by ARRT * Cardiovascular Interventional Radiography (CV) by ARRT * Vascular Interventional Radiography (VI) by ARRT * Abdomen (AB) RDMS by ARDMS * Obstetrics & Gynecology (OB/GYN) RDMS by ARDMS * Adult Echocardiography (AE) RDCS by ARDMS * Registered Vascular Technologist (RVT) by ARDMS * State Licensure required based on modality * Texas: MRT or LMRT by TMB * Louisiana: LRT (R) or (F) by LSRTBE * New Mexico: RRT or FUS by MIRTP NMED In accordance with the CHRISTUS Health License, Certification and Registration Verification Policy, all Associates are required to obtain the required certifications for their respective positions within the designated time frame. Work Schedule: 7AM - 5PM Work Type: Full Time

Requirements Education / Certifications Associate degree or two-year technical degree preferred Trade Certification and relevant experience (typically +2 years) Equivalent applied relevant experience (typically 3+ years) Job Requirements Typically less than 2 years of relevant experience. Willingness to learn and follow instructions carefully. Foundational communication skills (written and verbal) to interact with team members. Foundational math skills for recording data accurately. Ability to work cooperatively in a team environment. Proficiency in Microsoft Office and CAD tools (such as SolidWorks) is a plus. Attention to detail and commitment to quality and safety standards.

The Engineering Technician will support the Custom Product Solutions (CPS) Engineering in design, development, and manufacturing of medical devices. Support New Product Development (NPD), New Product Introduction (NPI), and manufacturing support of CPS products and services. What you will do: Help develop new manufacturing processes as required Assist engineers in design and assembly of fixtures and equipment Assist engineers with drawings, change requests, and engineering prototypes Assist engineers with BOMs, routers, and other documents Draft simple protocols based on templates as assigned by engineers Execute engineering protocols and run engineering experiments Compile proper information and create Operating Procedures Produce and inspect products at an acceptable quality level Follow existing Test Methods for various types of testing Develop Test Methods for new tests, as required Maintain orderly and safe working conditions as well as perform all duties in accordance with established procedures and good manufacturing procedures. Able to establish good working relationships with all levels of operations Complete other related tasks as assigned by engineers Skills for Success: High School diploma or equivalent 2-5 years' experience in a medical device manufacturing environment preferred Manufacturing of needle products experience is a plus Communicate skills at a minimum High School level English (Read, Write, Speak) Understand scientific units and measures as well as perform basic mathematical calculations Good knowledge of basic assembly tools like wrenches, pliers, cutters, cordless tools and bits Able to read basic engineering drawings and interpret technical instructions Proficient in Microsoft Word and Excel as well as editing drawings in AutoCAD and Solid Works

General Responsibilities: Perform field and/or laboratory testing, observation, and inspection of construction materials (e.g. soils, aggregates, concrete, asphalt, and steel). Communicate with project manager, engineering technicians, client representative, contractor's representative and others as applicable regarding the construction site, project requirements, and testing, observation, and inspection requirements and results. Transport material samples with associated identifying documentation to the laboratory for further testing and analysis. Tabulate, prepare, and submit data and observation in the form of written and digital reports as work is performed for daily transmittal to the Terracon Project Manager. Maintain and clean equipment, vehicles and work areas. May assist with scheduling and dispatch of Technicians to project sites. Adhere to strict safety standards. Essential Roles and Responsibilities: * Performs testing, observation, and inspection as directed in accordance with training and the specified procedures. * Provides clear documentation of findings and results. * Performs basic analysis of data to verify accuracy before communication and submittal to the Project Manager. * Communicates information to Project Manager and other personnel as directed by the PM. * Assists higher level technicians on complex tasks. * Maintains assigned equipment and related calibration. * Drive a vehicle such as a Ford F-150 or equivalent. * Follows safety rules and practices and other safety requirements for all projects. Performs pre-task planning prior to executing work. Report any safety issues or concerns to management. * Be responsible for maintaining quality standards on all projects. Requirements: * High school diploma or equivalent. * Minimum 1-2 years of relevant experience or the equivalent in training and related experience. * Experience with laptop computer use and Microsoft Word and Excel * Valid driver's license with acceptable violation history. Preferred Certification: * Certifications in one or more of the following areas: * NICET Level II certification in Construction Materials Testing in one or more of the following categories: Asphalt, Concrete, Soils. * NICET Level II certification in Geotechnical in one or more of the following categories: Construction, Laboratory, Exploration, Generalist * ICC certification in one or more of the following categories: Reinforced Concrete, Spray-applied Fireproofing, Structural Masonry, Prestressed/Post-Tensioned Concrete, Structural Steel - Bolting, Structural Steel - Welding. * American Welding Society (AWS) Certified Associate Welding Inspector (CAWI) * American Society for Nondestructive Testing (ASNT) Level II certification in more than one of the following areas: Visual Testing (VT), Magnetic Particle Testing (MT), Dye Penetrant Testing (PT), Radiographic Testing (RT), Ultrasonic Testing (UT). * Other national, regional, state, and local Materials related certifications requiring experience and written examination will also be considered if deemed appropriate by the Terracon Department Manager. Required Certification: * ACI certification in one or more of the following areas: * Concrete Field Testing Technician Grade I * Concrete Strength Testing Technician * Certified in radiation safety and Nuclear Density Gauge operation. * Successful completion of related internal safety certifications. About Terracon Terracon is a 100 percent employee-owned multidiscipline consulting firm comprised of more than 7,000 curious minds focused on solving engineering and technical challenges from more than 180 locations nationwide. Since 1965, Terracon has evolved into a successful multi-discipline firm specializing in environmental, facilities, geotechnical, and materials services. Terracon's growth is due to our talented employee-owners exceeding expectations in client service and growing their careers with new and exciting opportunities in the marketplace. Terracon's vision of "Together, we are best at people" is demonstrated through our excellent compensation and benefits package. Based on eligibility, role and job status, we offer many programs including medical, dental, vision, life insurance, 401(k) plan, paid time off and holidays, education reimbursement, and various bonus programs. EEO Statement Terracon is an EEO employer. We encourage qualified minority, female, veteran and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment, or any employee because of race, color, religion, national origin, age, sex, sexual orientation, gender identity, gender, disability, age, or military status.

Allied Health - Cath Lab Technologist Allied Health SPECIALTY UNIT: Cardiac Cath Lab Technologist SHIFT: 4/10 JOB TYPE: Full-Time Permanent Job Description: A Cath Lab Technologist is a professional who works in the field of cardiovascular technology. Cath lab Technologists are vital team members who assist doctors during invasive cardiovascular procedures such as angioplasty, cardiac catheterization, and electrophysiology. Responsibilities: Performs technical skills through education & expertise. Documents & communicates data in concise manner. Develops individual goal-directed care to cardiac patient through use of assessment and technical skills. Witness for waste of drugs in the automated drug delivery system to include narcotics. Attendance and being on time, ready to work your scheduled hours is an essential job function. Job Benefits: Competitive salary Direct Deposit 401K Comprehensive Health, Dental, and Vision benefits Employee discount program Excellent room for growth and advancement Requirements: Associates in Radiology degree TX state license ARRT BCLS Certified (prefer ACLS certified); prefer RCVT or RT. 2 years' experience in Cath lab preferred.

Cath Lab Tech Location: Tyler, TX Agency: Fusion Medical Staffing Pay: $2,182 to $2,508 per week Shift Information: Days - 5 days x 8 hours Contract Duration: 13 Weeks Start Date: 1/5/2026 AlliedTravelCareers is working with Fusion Medical Staffing to find a qualified Cath Lab Tech in Tyler, Texas, 75701! Travel Cath Lab Tech Company: Fusion Medical Staffing Location: Facility in Tyler, Texas Job Details Fusion Medical Staffing is seeking a skilled Cath Lab Tech for a 13-week travel assignment in Tyler, Texas. As a member of our team, you'll have the opportunity to make a positive impact on the lives of patients while enjoying competitive pay, comprehensive benefits, and the support of a dedicated clinical team. Required Qualifications: One year's recent experience as a Cardiac Cath Lab Tech Current BLS (AHA/ARC) certification ARRT, RCES, or RCIS certification Current ACLS (AHA/ARC) certification Preferred Qualifications: Valid Radiologic Technologist license in compliance within state regulations PALS (AHA/ARC) or ENPC Certifications Other certifications and licenses may be required for this position Summary: The Cath Lab Technologist is responsible for assisting in diagnostic and interventional cardiovascular procedures in the cardiac catheterization lab. This role involves preparing patients and equipment, monitoring hemodynamic data, assisting physicians during procedures, and ensuring patient safety throughout the process. The technologist operates specialized imaging equipment, maintains sterile technique, and collaborates with the healthcare team to provide high-quality patient care. This position requires technical expertise in cardiovascular procedures, critical thinking skills, and the ability to work efficiently in high-pressure situations. Essential Work Functions: Prepare and position patients for cardiac catheterization, angioplasty, stent placement, electrophysiology studies, and other interventional procedures Assist physicians during procedures by passing catheters, wires, balloons, and stents, and operating fluoroscopy and hemodynamic monitoring equipment Operate and maintain imaging equipment, contrast injectors, and hemodynamic monitoring systems, ensuring proper functionality Scrub in and assist with sterile field setup, ensuring adherence to infection control and procedural protocols Perform sheath removal and hemostasis using manual compression or closure devices as directed Maintain accurate documentation, including patient records, imaging data, and equipment logs Assist with inventory management, stocking supplies, and ensuring proper storage of sterile instruments and medications Adhere to radiation safety protocols, ensuring proper use of lead aprons, shields, and dosimeters Ensure compliance with hospital policies, safety guidelines, and regulatory requirements Adhere to hospital safety protocols, infection control guidelines, and regulatory standards Perform other duties as assigned within the scope of practice Required Essential Skills: Critical thinking, service excellence, and good interpersonal communication skills The ability to read, write, and communicate in the English language Ability to read/comprehend written instructions, follow verbal instructions, and proficiency in PC skills Physical Abilities - Must be able to remain in a stationary position, move about, move equipment (50-100lbs), push, pull, and bend Interpersonal Skills - Must be able to work effectively with a variety of personnel (professional and ancillary) to present a positive attitude and professionalism Technical/Motor Skills - Must have the ability to grasp, perform fine manipulation, push/pull, and move about when assisting with procedures and/or using department equipment Mental Requirements - Must be able to cope with frequent contact with the general public and customers while meeting deadlines under pressure. Must be able to work under close supervision occasionally, as well as working without assistance from other personnel. Must be able to contend with irregular activity schedules occasionally and continuous concentration to detail Sensory - Must possess visual acuity and ability to effectively communicate Benefits Include: Highly competitive pay for travel professionals Comprehensive medical, dental, and vision insurance with first day coverage Paid Time Off (PTO) after 1560 hours Life and Short-term disability offered 401(k) matching Aggressive Refer-a-friend Bonus Program 24/7 recruiter support Reimbursement for licensure and CEUs Why Choose Fusion? At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Your passion for helping others deserves a partner just as committed to supporting you - that's why we offer day one insurance, $0 copay for mental health services, scholarships and awards, exclusive discounts, and more. From your personal recruiter to our clinical and traveler experience teams, we're here to guide and celebrate you along your journey. You take care of others; we take care of you. Other Duties Disclaimer: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Other duties may be assigned. This job description is not a comprehensive list of all activities, duties, or responsibilities that are required of the employee for this job and is subject to change at any time with or without notice. Start your rewarding career as a Travel Cath Lab Tech with Fusion Medical Staffing and join our mission to improve lives. Apply now! *Fusion is an EOE/E-Verify Employer About Fusion Medical Staffing Fusion Medical Staffing provides career opportunities to healthcare professionals by helping medical facilities fill their staffing needs. Fusion staffs a variety of specialties within the nursing and allied healthcare fields. We offer competitive pay packages and the benefits that travelers deserve. We pride ourselves on our communication skills, accurate job transparency, and traveler-first mentality. At Fusion, you can actually choose your own adventure! Fusion started staffing therapists in 2009, and has since expanded to specialties within the nursing, long-term care, home health, cath lab, laboratory, cardiopulmonary, and radiology fields. We continue to seek out the best talent in the healthcare industry. Our travelers provide the hands that help heal and save patients' lives, and they will continue to fill our client's facilities nationwide. Fusion is committed to transparency and putting our traveler's needs, wants, and preferences first; that means having our travelers be in the driver's seat of their own careers. When you put your trust in Fusion, we will help you excel in your career and expand your experience. 11153523EXPPLAT

Biomerics is a world-class manufacturer and innovative polymer solutions provider for the medical device and biotech industries. As a vertically integrated company, we specialize in designing, developing, and producing medical devices for diagnostic and interventional procedures. We are focused on next-generation solutions for vascular access, electrophysiology, cardiac rhythm management, neurovascular, structural heart, and cardiovascular markets. At Biomerics, we are dedicated to our diverse employee base. We understand that a strong, skilled, and engaged workforce is the foundation of our continued success as a business. We strive to live up to the Biomerics values in all our interactions. It is an exciting time to be part of our collective team, and there is no limit to the impact that can be achieved here at Biomerics. We improve and advance the lives of our employees and patients who depend on our products. At Biomerics, we believe in integrity, partnership, empowerment and accountability, trust, agility, teamwork, and excellence, and we care. Our team-oriented, customer-focused corporate culture prioritizes building strategic, mutually beneficial partnerships with customers and our team members. Job Summary Engineering Technician I supports equipment maintenance and production activities by assisting with basic preventive maintenance tasks, following detailed instructions, and learning troubleshooting techniques. The role involves working closely with experienced technicians and engineers in a regulated medical device manufacturing environment. Job Responsibilities Assist with performing preventive maintenance under close supervision. Follow detailed instructions to clean and maintain equipment, tooling, and fixtures. Support operators by learning and helping with standard production processes. Help with equipment installation activities as directed. Support in documenting maintenance activities and test run results. Follow established Quality Procedures, Standard Operating Procedures (SOPs), and Work Instructions. Use foundational computer skills to record data and communicate within the team. Learn to identify equipment problems and report issues to supervisors or lead technicians. Participate in team activities and listen to guidance from experienced staff. Work within ISO 13485 and 9001:2000 regulatory requirements. Requirements Education / Certifications Associate degree or two-year technical degree preferred Trade Certification and relevant experience (typically +2 years) Equivalent applied relevant experience (typically 3+ years) Job Requirements Typically less than 2 years of relevant experience. Willingness to learn and follow instructions carefully. Foundational communication skills (written and verbal) to interact with team members. Foundational math skills for recording data accurately. Ability to work cooperatively in a team environment. Proficiency in Microsoft Office and CAD tools (such as SolidWorks) is a plus. Attention to detail and commitment to quality and safety standards.

The Engineering Technician will support the Custom Product Solutions (CPS) Engineering in design, development, and manufacturing of medical devices. Support New Product Development (NPD), New Product Introduction (NPI), and manufacturing support of CPS products and services. What you will do: Help develop new manufacturing processes as required Assist engineers in design and assembly of fixtures and equipment Assist engineers with drawings, change requests, and engineering prototypes Assist engineers with BOMs, routers, and other documents Draft simple protocols based on templates as assigned by engineers Execute engineering protocols and run engineering experiments Compile proper information and create Operating Procedures Produce and inspect products at an acceptable quality level Follow existing Test Methods for various types of testing Develop Test Methods for new tests, as required Maintain orderly and safe working conditions as well as perform all duties in accordance with established procedures and good manufacturing procedures. Able to establish good working relationships with all levels of operations Complete other related tasks as assigned by engineers Skills for Success: High School diploma or equivalent 2-5 years' experience in a medical device manufacturing environment preferred Manufacturing of needle products experience is a plus Communicate skills at a minimum High School level English (Read, Write, Speak) Understand scientific units and measures as well as perform basic mathematical calculations Good knowledge of basic assembly tools like wrenches, pliers, cutters, cordless tools and bits Able to read basic engineering drawings and interpret technical instructions Proficient in Microsoft Word and Excel as well as editing drawings in AutoCAD and Solid Works

Hospitality Health ER is a freestanding ER in Longview, TX that provides personal attention to all patients with first-class care. We pride ourselves on providing exceptional hospitality and customer service to everyone that enters our facility, going above and beyond the call of duty. We encourage a strong team environment, where our staff will step up to the plate during the busiest of times and lend a hand in whatever direction is needed. If you are looking to make a change in your career and be part of an exciting team, with endless possibilities for career growth, apply today! We are looking to fill positions immediately! Overview A freestanding ER in Longview, TX is seeking a Laboratory Technician to join their team. The Laboratory Technician will strive to provide proficient, competent care while ensuring accurate results. Responsibilities for the Laboratory Technician Creating and maintaining a patient centered focus by engaging in a positive working relationship with all patients, visitor, and facility staff. Performing laboratory patient testing and reporting as assigned by the Laboratory Director in accordance with the Laboratory Procedure Manual. Identifying patients and labels specimens correctly and legibly according to departmental policies and procedures. Collecting appropriate specimens from patients ensuring that two patient identifiers are collected prior to collection and labeling at the patient's bedside. Preparing or instructing patients for specimen collection in age-appropriate dialog. Preparing specimens to be sent out to a reference laboratory. Following all laboratory safety policies and procedures as well as making all records and documents available for inspection by the Laboratory Director, Technical Consultant, or CLIS Inspectors. Running controls and documents as described in the QC Policy 12.01.2015. Calibrating all laboratory instruments in accordance with the Laboratory Policy and Procedure Manual. Maintaining all laboratory instruments as prescribed by the manufacturers and troubleshooting instrument failure according to the manufacturers troubleshooting procedures. Maintaining laboratory supply inventories and order/restock supplies as needed to ensure no disruptions are caused due to supply levels. Requirements and Qualifications for the Laboratory Technician Associate degree in laboratory science OR Bachelor's degree in chemistry or biology is required. ASCP Certified or equivalent Preferred. 1 year experience in a hospital setting Minimum. Knowledge of hospital laboratory practices, including infection control requirements Required . Knowledge of governmental and regulating policies and standards Required . Critical thinking skills, ability to work autonomously and make efficient use of time and resources. Must have a current driver's license with no restrictions. Must have the ability to be flexible and meet the scheduling demands of the department. Pay & Benefits Pay is commensurate with experience Night shift differential 401K with company match Additional benefits for full-time employees Job description statements are intended to describe the general nature and level of work being performed by employees assigned to this job title. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required. Hospitality Health ER is an equal opportunity employer inclusive of female, minority, disability and veterans, (M/F/D/V). Hiring, promotion, transfer, compensation, benefits, discipline, termination and all other employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, age, disability, national origin, citizenship/immigration status, veteran status or any other protected status.