Quality assurance technician jobs in Wilmington, NC - 31 jobs

The Manufacturing Technologist supports production operations through the implementation, troubleshooting, and continuous improvement of manufacturing processes, equipment, and robotic automation systems. This role acts as a technical liaison between engineering, maintenance, and operations to ensure optimized process performance, quality output, and compliance with safety and efficiency standards. Key Responsibilities: Provide hands-on technical support to manufacturing lines, with a focus on fuel pump and injector assembly processes. Support installation, programming, and maintenance of robotic automation systems to improve production flow and reduce manual labor. Collaborate with engineering to implement new processes, automation technologies, and equipment upgrades. Monitor and analyze process performance data to identify improvement opportunities and reduce waste. Assist in root cause analysis and corrective actions for process-related issues, quality concerns, or downtime events. Maintain, troubleshoot, and adjust robotic equipment to ensure consistent operation and minimal disruption to production. Train production staff on new automated equipment, procedures, and best practices. Support preventive maintenance programs for both mechanical and robotic systems. Participate in continuous improvement initiatives, lean events, and kaizen activities. Document standard work procedures, change controls, and process updates accurately. Ensure adherence to safety, quality, and operational standards. Required Qualifications: Associate's degree in Manufacturing Technology, Industrial Automation, or related technical field; or equivalent experience. 2+ years of experience in a manufacturing or production support role with exposure to automation systems. Hands-on experience with robotic systems (e.g., FANUC, ABB, Yaskawa, or similar platforms). Ability to read and interpret technical drawings, electrical schematics, and robotic programming code. Proficient in problem-solving tools such as root cause analysis, 5 Whys, or Fishbone diagrams. Strong collaboration and communication skills across departments. Flexible to work different shifts or weekends to support production needs. Preferred Qualifications: Experience with PLCs, CNC machines, and vision-guided robotic systems. Knowledge of lean manufacturing, Six Sigma, or TPM methodologies. Familiarity with ISO 9001 / IATF 16949 quality standards. Competency in Microsoft Office and manufacturing software (ERP, MES, HMI interfaces). Physical Requirements: Ability to stand, walk, bend, and lift up to 40 lbs. Work in a manufacturing environment with exposure to machinery, robotics, and varying temperatures. Stanadyne is an equal opportunity employer and does not discriminate on the basis of race, religion, national origin, sex, gender, color, marital status, sexual orientation, disability, veteran status or any other protected class.

We are seeking a candidate with strong experience in Health & Food Safety and Auditing to support operations across two functional areas within the facility. This role will have three direct reports and requires hands-on leadership and collaboration. Preferred qualifications include SQF, PCQI, and HACCP certifications, with Seafood HACCP considered a strong plus. This is a day-shift role and requires schedule flexibility as needed. Administer the Lineage Safety Program at the facility level to ensure team members are working in a safe, controlled, and risk-free environment. KEY DUTIES AND RESPONSIBILITIES * Supervise, train, provide performance feedback and assign duties of direct reports to ensure productivity, efficiency, and effectiveness * Ensure safe practices outlined by the safety program, standard operating procedures and standard work instructions are followed * Inspect, audit and verify all inbound and outbound product to ensure quality standards are met * Ensure accuracy and legal obligations of all labels are met * Complete daily walkthrough system checks * Manage complaint and non-conformance issues, including root cause and corrective actions * Keep work areas and equipment clean and safe throughout shift; in addition to following weekly and master sanitation schedule * May need to ensure all glass controls are managed effectively ADDITIONAL DUTIES AND RESPONSIBILITIES * Maintain equipment calibration checks * Identify facility training and support needs on quality systems, policies, procedures and processes MINIMUM REQUIREMENTS * High School Diploma (Secondary School) or GED * 2 years' safety experience in a logistics, industrial, or related environment * Proficient computer skills including Microsoft Office Suite * Excellent verbal and written communication skills * Demonstrated supervisory skills with emphasis on guiding and developing a team, customer service, communications, and planning * Ability to work in temperatures as low as -20 Fahrenheit/-25 Celsius in cold storage sites or up to 100 Fahrenheit/37 Celsius in dry storage sites while wearing company provided personal protective equipment and freezer gear * Must be comfortable with various noise levels, at times, can be loud Pay Range:$60,600.00 - $102,200.00 Why Lineage? This is an excellent position to begin your career path within Lineage! Success in this role enables greater responsibilities and promotions! A career at Lineage starts with learning about our business and how each team member plays a part each and every day to satisfy our customers' requirements. Beyond that, you'll help us grow and learn on our journey to be the very best employer in our industry. We'll ask you for your opinion and ensure we do our part to keep you developing and engaged as we grow our business. Working at Lineage is energizing and enjoyable. We value respect and care about our team members. Lineage is an Equal Employment Opportunity Employer and is committed to compliance with all federal, state, and local laws that prohibit workplace discrimination and unlawful harassment and retaliation. Lineage will not discriminate against any applicant on the basis of race, color, age, national origin, religion, physical or mental disability or any other protected status under federal, state and local law. Benefits Lineage provides safe, stable, reliable work environments, medical, dental, and basic life and disability insurance benefits, 401k retirement plan, paid time off, annual bonus eligibility, and a minimum of 7 holidays throughout the calendar year.

At Food Lion, Associates are the most important assets to our organization. We want associates to have meaningful careers full of variety and challenges. Each associate contributes to the overall success of Food Lion, and in return, we strive to provide all associates with a fulfilling work experience and reward performance and commitment. We are committed to the professional development of our associates through on-the-job learning opportunities and training. PT Food Lion provides equal employment opportunities to all associates and applicants for employment without regard to race, color, religion, sex (including pregnancy, childbirth and related conditions) national origin, age, disability, sexual orientation, veteran status, gender identity or gender expression or any other characteristic protected by law. If you have a disability and require assistance in the application process, please contact our Recruiting Department at ***********************

Job DescriptionBenefits: 401(k) 401(k) matching Dental insurance Health insurance Paid time off Quality Assurance Specialist Employment Type: Full-Time Department: Contract Molding / Quality Assurance About the Role Wilmington Machinery is expanding its molding and assembly operations and implementing new quality processes, including FM-approved product manufacturing. The Quality Assurance Specialist supports day-to-day quality activities such as inspections, documentation control, nonconformance tracking, and FM compliance. This is a hands-on role working closely with molding operators, engineers, and assembly personnel to ensure consistent product quality, proper documentation, and accurate traceability. No prior FM Approvals experience is requiredcandidates with ISO, manufacturing quality, or audit experience will have the foundation needed to succeed. Key Responsibilities Quality System Support Assist in developing and maintaining quality procedures, documentation, and workflows. Help build inspection plans, forms, and process controls to meet customer and regulatory requirements. Support document control for drawings, revisions, inspection standards, and quality records. FM Approvals & Compliance Support Support FM production control processes, traceability, and documentation requirements. Maintain FM-required records such as inspection data, FM mark logs, and traceability documentation. Assist in preparing for FM audits by gathering records, validating documentation, and ensuring readiness. Work with internal teams to ensure FM production rules are followed and documented properly. Day-to-Day Quality Oversight Perform receiving, in-process, and final inspections. Maintain inspection records, calibration logs, and process verification checklists. Identify and segregate nonconforming material; initiate NCRs and support root-cause analysis. Help ensure consistent application of quality standards across molding and assembly operations. Customer & Internal Collaboration Support customer documentation needs, including first article inspections and qualification packages. Assist with complaint investigations by providing inspection data and documentation. Collaborate with Engineering, Molding, and Assembly teams on process improvements and defect resolution. Continuous Improvement Help identify trends related to defects, scrap, or process issues. Recommend improvements to inspection methods, documentation, or process controls. Support training efforts by helping create visual standards or inspection guides. Required Qualifications (Flexible) Candidates meeting most of the following are encouraged to apply: Experience working in quality within a manufacturing environment (plastics, fabrication, or assembly preferred). Ability to read engineering drawings and understand dimensional requirements. Familiarity with inspection tools (calipers, micrometers, gauges, etc.). Understanding of documentation control and nonconformance processes. Strong communication and organizational skills. Preferred (Not Required) Exposure to ISO 9001, AS9100, IATF 16949, or similar quality systems. Experience supporting internal or external audits. Familiarity with FM Approvals requirements (traceability, documentation control, production checks). Basic understanding of GD&T. Experience creating or improving procedures, forms, or workflows. Why Join Wilmington Machinery? Play a critical role in building quality processes for a growing molding and assembly operation. Gain experience in FM Approvals, customer qualification packages, and real-world production quality. Work collaboratively with Engineering, Production, and Operations in a hands-on environment. Opportunities for skill growth as production volumes and systems expand.

Schedule: Full-Time, 1st shift About Us Proudly serving our clients for over 40 years, we continue to expand thanks to long-term contracts and a reputation for precision and reliability. As we continue to grow, we've invested in brand-new, state-of-the-art machines and are expanding our team with skilled professionals who take pride in craftsmanship, innovation, and quality. If you're looking for a place where your expertise is valued, your ideas matter, and your work makes a real impact, we'd love to have you on our team. Why Master Machining? At Master Machining, we're more than just a workplace, we're a family. You'll be surrounded by experienced machinists who take pride in mentoring others, leaders who value your input, and an environment built on respect, teamwork, and precision. With new equipment, competitive pay, and a supportive culture, you'll have everything you need to build a rewarding career. What We Offer • - Competitive hourly pay from $24-$32/hr, based on experience • - Consistent 40-50 hour work weeks with overtime available • - 401(k) with company match after one year of service • - Quarterly “Earned Days” program - earn paid time off for consistent attendance • - Yearly reviews • - Paid birthday off every year Health & Wellness • - Medical insurance (company pays up to $460/month toward individual coverage) • - Option to decline coverage and receive an additional $1.65/hour in pay • - Dental and vision coverage available Time Off & Recognition • - 8 paid holidays, plus Veterans Day off (with pay) for all who served • - 40 hours paid vacation after one year, increasing with tenure • - Catered Veteran's Day lunch to honor our military team members • - Opportunities for long-term growth and cross-training Your Role As a Quality Control Inspector, you'll play a key part in ensuring that every part produced at Master Machining meets or exceeds customer and industry standards. You'll inspect precision components, perform detailed measurements, and uphold the standards that define our company's reputation for excellence. Your Responsibilities: Inspect machined parts using micrometers, calipers, gauges, and other precision tools Perform first-article, in-process, and final inspections Interpret blueprints, drawings, and specifications to verify part compliance Utilize CMM (Coordinate Measuring Machine) or comparable inspection equipment when applicable Maintain accurate inspection reports and documentation Collaborate with machinists and leadership to resolve quality concerns Support continuous improvement initiatives and adherence to ISO 9000 standards What We're Looking For: Experience as a Quality Control Inspector in a machining or manufacturing environment Strong ability to read blueprints and use precision measurement tools Familiarity with ISO 9000 or similar quality systems Ability to lift up to 50 lbs safely Excellent attention to detail, reliability, and communication skills Willingness to work overtime or occasional Saturdays when needed Current List of Our Machines: • Haas ST-40 4" Bar, 25.5" Chucking • Doosan TT2100SYYB 3" Bar, 9" Chucking, • Twin Turret with Bar Feeder • Mori-Seiki Fronteir LII 10" x 24" • Haas SL-10 with Bar Loader, 1-5/8" capacity • Tsugami-TMA8F Multi Axis Turning Center with Bar Feeder • Tsugami-M08SY Live Tooling & Sub Spindle with Bar Feeder (3) • Tsugami-M08SY Live Tooling and Sub Spindle with Gantry Loader • Haas VF 2 SS w/4 axis (3) 30" x 16" x 20" • Haas VF 3 SSYT w/4 axis (2) 40" x 26" x 25" • Haas VF 3 SSYT w/5 axis (2) 40" x 26" x 25" • Haas VF 10 32" x 120" x 30" • Haas EC-400 PP Horizontal 6 Pallet Pool 22" x 25" x 22 • Timemaster Super AT Lathe 40" x 120" • Clausing-Metosa Engine Lathe 24" x 108" • Clausing Colchester Lathe 15" x 40" (2) • Acer 3VKH E-Mill Vertical Milling Machine • Acer 3VK Ultima Vertical Milling Machine (3) • Tsugami BN-20 w/6th axis 20 MM Dia • Tsugami B012-III w/4th axis 12 MM Dia. • Tsugami S206-II w/6th axis 20 MM Dia. • Supertech 618 Automatic Surface Grinder 6" x 18" • O.D. Grinder 14" x 22" • Agie-Charrmilles F1 440 CCS • Climate Controlled QC Lab • Brown & Sharpe CMM DCC ONE 7.7.5 28"m x 28" x 20" • Brown & Sharpe Micro-Hite 900 (2) • Mitutoyo PH-A14 Optical Comparator w/DRO • J & L PC-14-A Optical Comparator w/DRO • Mitutoyo 178-561-02A Surftest • Full Complement of Thread, Ring and Bore Gaging • Accupress Advantage 177512 Press Brake • Amada FaB.50 D Press Brake • National NR4316 Sheet Roller • Akyapak 1550 Plate Roller • PEMserter series 2000 w/Feeder • Shop Sabre 4896 CNC Router • 351 Syncrowave 350 amp • Aircrafter 330ST 300 amp • 250 Syncrowave DX 250 amp • 200 Dynasty 200 amp • 350 Dynasty 350 amp • 400 Dynasty (Miller) • Millermatic 250 (2) • Burco/Koco KST-9 Stud • Trumpf Trulaser 3030 60" x 120" Fully Automated • Trumpf 2530 48" x 96" Auto Pallet Shuttle System. • Minilase Pro SE 12" x 12" x 20" • Cosen C-510MNC Production Band Saw 13" x 20" • TechniIntel G2 713 78.7" x 157.5" Ready to take your machining career to the next level? Apply today and join a company where your skill and dedication make all the difference.

The Manufacturing Technologist supports production operations through the implementation, troubleshooting, and continuous improvement of manufacturing processes, equipment, and robotic automation systems. This role acts as a technical liaison between engineering, maintenance, and operations to ensure optimized process performance, quality output, and compliance with safety and efficiency standards. Key Responsibilities: Provide hands-on technical support to manufacturing lines, with a focus on fuel pump and injector assembly processes. Support installation, programming, and maintenance of robotic automation systems to improve production flow and reduce manual labor. Collaborate with engineering to implement new processes, automation technologies, and equipment upgrades. Monitor and analyze process performance data to identify improvement opportunities and reduce waste. Assist in root cause analysis and corrective actions for process-related issues, quality concerns, or downtime events. Maintain, troubleshoot, and adjust robotic equipment to ensure consistent operation and minimal disruption to production. Train production staff on new automated equipment, procedures, and best practices. Support preventive maintenance programs for both mechanical and robotic systems. Participate in continuous improvement initiatives, lean events, and kaizen activities. Document standard work procedures, change controls, and process updates accurately. Ensure adherence to safety, quality, and operational standards. Required Qualifications: Associate's degree in Manufacturing Technology, Industrial Automation, or related technical field; or equivalent experience. 2+ years of experience in a manufacturing or production support role with exposure to automation systems. Hands-on experience with robotic systems (e.g., FANUC, ABB, Yaskawa, or similar platforms). Ability to read and interpret technical drawings, electrical schematics, and robotic programming code. Proficient in problem-solving tools such as root cause analysis, 5 Whys, or Fishbone diagrams. Strong collaboration and communication skills across departments. Flexible to work different shifts or weekends to support production needs. Preferred Qualifications: Experience with PLCs, CNC machines, and vision-guided robotic systems. Knowledge of lean manufacturing, Six Sigma, or TPM methodologies. Familiarity with ISO 9001 / IATF 16949 quality standards. Competency in Microsoft Office and manufacturing software (ERP, MES, HMI interfaces). Physical Requirements: Ability to stand, walk, bend, and lift up to 40 lbs. Work in a manufacturing environment with exposure to machinery, robotics, and varying temperatures. Stanadyne is an equal opportunity employer and does not discriminate on the basis of race, religion, national origin, sex, gender, color, marital status, sexual orientation, disability, veteran status or any other protected class.

IRI believes in commitment, Integrity and strategic workforce solutions. Integrated Resources, Inc., is led by a seasoned team with combined decades in the industry. We deliver strategic workforce solutions that help you manage your talent and business more efficiently and effectively. Since launching in 1996, IRI has attracted, assembled and retained key employees who are experts in their fields. This has helped us expand into new sectors and steadily grow. We've stayed true to our focus of finding qualified and experienced professionals in our specialty areas. Our partner-employers know that they can rely on us to find the right match between their needs and the abilities of our top-tier candidates. By continually exceeding their expectations, we have built successful ongoing partnerships that help us stay true to our commitments of performance and integrity. Our team works hard to deliver a tailored approach for each and every client, critical in matching the right employers with the right candidates. We forge partnerships that are meant for the long term and align skills and cultures. At IRI, we know that our success is directly tied to our clients' success. Job Description Title: Quality Technician (Data Admin) Location: Wilmington,NC Duration: 6+ MONTHS SCHEDULE: Can be part-time or full-time, 20-40 hours. Days and start/stop times during the day are flexible but around the core time of 6am-6pm. Manager is willing to consider candidates that want to work 40 hours and also open to candidates that wants to work a part-time schedule. This position has potential to go longer term for the right candidate. RESPONSIBILITIES OF THE POSITION: • Provide data analysis to departments by participation in teams and individual consultation. • Provide key metrics updates on a monthly basis and as needed • Provide harmonization/standardization on techniques world wide • Provide Cost of Quality data for division reporting MAJOR RESPONSIBILITIES: • Prepare monthly metrics reporting on global basis • Prepare division level trend tracking • Prepare division level documentation • Collect, organize, analyze and graph data, publish reports, and maintain accurate records • Upload and maintain division documentation in share point site • Upload and maintain access to division change system in share point site • Upload and maintain technical documents • Support and improve document approval process and document change process • Perform data handling and image processing • Audit appropriate related documentation • Develop and communicate schedules and manage timelines for assigned tasks Qualifications EDUCATION / EXPERIENCE: • High School Diploma or GED required; 2 yr. associate degree desired (degrees in the STEM categories are preferred as well) • Experience 0-3 years EQUIPMENT OR SOFTWARE PROFICIENCIES: • Proficiency with MS Office programs (Excel, Word, PowerPoint, Outlook, SharePoint) • Strong knowledge of Microsoft Excel, Word, & PowerPoint • Strong knowledge of Microsoft SharePoint 2010 and 2013 OTHER SKILLS NEEDED: • Quick learner • Team player - Must work effectively with several organizations and locations • Rigorous and organized - role will have to interface with many internal and external customers with many activities progressing at the same time. Customer requirements will need to be met on time. • Approach work with positive attitude • Data analysis skills with Excel or other software package Additional Information Regards, Monil Patel Technical Recruiter Integrated Resources, Inc (732) 844-8747 Ext.338 monil @irionline.com

Technician (1 full-time positions available) Fast growing and employee friendly company, with an exciting opportunity for Technician in our Wilmington, DE office. We are seeking a candidate who wants to work in a friendly and safe environment. Essential duties and responsibilities Fabricates, including but not limited to, lay-ups and lamination, molding, shaping/forming, assembly, and static bench alignment. Quality checks on materials, required procedures and completed work by ensuring accuracy of fit, operation, durability and cosmetic appearance of prosthetics and orthoses fabricated or repaired. Completes assigned work for device delivery per company standards Determines the prosthetic needs of the patient by interpreting data and measurements provided by the clinician. Maintain professional and technical knowledge by attending educational workshops Create effective relationships with staff and customers Helps assure internal and external customer responsiveness Always adheres to Employee Handbook, Infection Control Policies and Procedures, applicable protocols and standards including ABC, BOC, and JCAHO Participates in projects as needed Completes other duties as assigned Qualification requirements Initiates efforts in quality improvement Moves from task to task readily Recognizes issues and requirements of problems High School Diploma We offer a competitive compensation package and a great work environment. If you are someone looking to use your talents to help our clients meet their needs, and work with an exciting team, we want to hear from you. We promote a drug-free workplace and all job offers will be contingent on passing a drug screen and a favorable pre-employment background check.

At Alcami, we deliver reliable solutions that unlock the potential of transformative medicines from discovery to commercialization, through trusted partnership with our clients, recognized industry expertise and proven regulatory track record. Are you interested in joining our team? Job Summary The Manufacturing Technician I - Oral Solid Dosage (OSD) is accountable for results in a fast-paced environment and assists with the manufacturing of oral solid dose products for commercial distribution. The Manufacturing Technician I performs the operation of manufacturing processing equipment by following standard operating procedures (SOPs) and batch records in accordance with regulatory agencies and current Good Manufacturing Practices (cGMPs). The Manufacturing Technician I employs acceptable techniques while working in manufacturing environments, including PPE gowning. On-Site Expectations 100% on-site position. 1st Shift: Monday - Thursday, 6:30am - 5:00pm. Responsibilities Follows applicable SOPs and cGMPs to perform assigned duties and tasks. Ensures timely completion and compliance with cGMP and all other relevant company training requirements. Performs applicable manufacturing techniques and technologies per SOPs and cGMPs. Performs manufacturing technologies and operation of manufacturing and material handling equipment. Documents activities in real time on controlled documentation and legibly, per SOPs and cGMPs. Performs in-process testing, weight checks, component counting and basic math calculations. Performs cleaning of rooms, tools, and equipment. Assists with other manufacturing areas as required. Performs activities right first time in areas of Solid Oral Dosage: Microencapsulation, Blending, and Bulk Packaging. Applies job skills, company policies and SOPs to complete a variety of tasks. Follows general instructions on routine work, detailed instructions on new projects or assignments. Follows all Safety requirements and leads by example a safety-first culture. Maintains accurate and detailed production documentation in compliance with GMP, FDA regulations, and Alcami's internal policies. Other duties as assigned. Qualifications High school diploma or GED required. Associate's degree preferred. 1+ years of relevant experience preferred (Drug Substance manufacturing experience will be considered). Prior manufacturing work environment required. cGMP or prior work experience in a regulated environment required. Prior pharmaceutical or CDMO experience required. Knowledge, Skills, and Abilities Good verbal and written communication and documentation skills required. Applies job skills, company policies, and SOPs to complete a variety of tasks. Good detail orientation and organizational skills required. Good problem-solving and basic trouble-shooting ability required. Ability to perform basic math calculations. Ability to read and comprehend detailed written instructions required. Ability to move materials throughout the facility using appropriate methods and equipment required. Proficiency in basic computing skills required. Ability to use the appropriate PPE based on product (i.e., PAPR, Supplied Air Respirator). Physical Demands and Work Environment The physical demands and work environment characteristics described here are representative of those that must be met or encountered by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; reach with hands and arms; talk or hear and smell. The employee is frequently required to walk; climb or balance and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit. The employee must regularly lift and/or move up to 25 pounds, frequently lift and/or move up to 50 pounds, occasionally lift and/or move up to 75 pounds and occasionally lift and/or move over 75 pounds with assistance. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts, fumes, or airborne particles and toxic or caustic chemicals. The employee is occasionally exposed to wet and/or humid conditions; high, precarious places; risk of electrical shock and vibration. The noise level in the work environment is usually moderate. The employee will be required to wear the appropriate personal protective equipment for specific job duties to be performed. Such personal protective equipment may include, but not limited to safety eyewear, hearing protection, various types of respirators/breathing apparatus, lab coats, full protective body coverings, various types of gloves, etc. Based on product, the use of PAPR or supplied air respirator may be required. The use of tight-fitting respirators limits facial hair for proper protection. Regulations may require employees to participate in routine medical surveillance. Other tasks involving elevated work may require the use of a body harness and lanyard. Additionally, the employee may be required to operate an industrial vehicle.

Acute Care TechnologySee attached Job Description At ZOLL, we're passionate about improving patient outcomes and helping save lives. We provide innovative technologies that make a meaningful difference in people's lives. Our medical devices, software and related services are used worldwide to diagnose and treat patients suffering from serious cardiopulmonary and respiratory conditions. The Acute Care Technology division of ZOLL Medical Corporation develops and delivers innovative lifesaving products and software solutions to EMS, hospital, public safety, and military customers globally. Products include AEDs, trauma kits, ventilators, temperature management solutions, and more. Our dedicated employees take pride in their commitment to improving patient outcomes while delivering world-class customer service. At ZOLL, you won't just have a job. You'll have a career-and a purpose. Join our team. It's a great time to be a part of ZOLL! Job Summary Verification of procured materials, sub-assemblies, finished products and processes to the companies Quality Standards. This may include visual inspection, dimensional measurement, and electrical testing to verify conformance to established standards and specifications. Essential Functions * Inspect measure and/or test material to established methods and standards. * Utilize various inspection tools, such as Vision System, Verniers, Micrometers, Rulers, Oscilloscopes, DVMs, Power Supplies, Defib/Pacer Analyzers, custom fixtures etc. per procedures. * Document inspection and test results according to established procedures. * Maintain quality documentation files such as, Device History Records (DHR) and Inspection History Records. * Process returned material to established procedures. * Read and interpret documentation such as Standard Operating Procedures (SOP), schematics, technical drawings, PDAs and ECOs. * Interface with other functions and departments as required. Required/Preferred Education and Experience * High School Diploma Or equivalent. required * 1-3 years experience in a related position. required Knowledge, Skills and Abilities * Good written and oral communication skills. * Ability to read specifications, procedures and engineering drawings. * Familiar with use of mechanical and electronic test equipment. * IPC-A-61OD for Incoming Inspection, preferred. * Basic computer skills: Microsoft Office, Oracle and MES. Physical Demands * Ability to lift up to 50 lbs. ZOLL is a fast-growing company that operates in more than 140 countries around the world. Our employees are inspired by a commitment to make a difference in patients's lives, and our culture values innovation, self-motivation and an entrepreneurial spirit. Join us in our efforts to improve outcomes for underserved patients suffering from critical cardiopulmonary conditions and help save more lives. #LI-LV1 The hourly pay rate for this position is: $24.00 to $25.00 Factors which may affect this rate include shift, geography, skills, education, experience, and other qualifications of the successful candidate. Details of ZOLL's comprehensive benefits plans can be found at ********************* Applications will be accepted on an ongoing basis until this position is filled. For fully remote positions, compensation will comply with all applicable federal, state, and local wage laws, including minimum wage requirements, based on the employee's primary work location. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, disability, or status as a protected veteran. ADA: The employer will make reasonable accommodations in compliance with the Americans with Disabilities Act of 1990.

Acute Care TechnologySee attached Job Description At ZOLL, we're passionate about improving patient outcomes and helping save lives. We provide innovative technologies that make a meaningful difference in people's lives. Our medical devices, software and related services are used worldwide to diagnose and treat patients suffering from serious cardiopulmonary and respiratory conditions. The Acute Care Technology division of ZOLL Medical Corporation develops and delivers innovative lifesaving products and software solutions to EMS, hospital, public safety, and military customers globally. Products include AEDs, trauma kits, ventilators, temperature management solutions, and more. Our dedicated employees take pride in their commitment to improving patient outcomes while delivering world-class customer service. At ZOLL, you won't just have a job. You'll have a career-and a purpose. Join our team. It's a great time to be a part of ZOLL! Job Summary Verification of procured materials, sub-assemblies, finished products and processes to the companies Quality Standards. This may include visual inspection, dimensional measurement, and electrical testing to verify conformance to established standards and specifications. Essential Functions Inspect measure and/or test material to established methods and standards. Utilize various inspection tools, such as Vision System, Verniers, Micrometers, Rulers, Oscilloscopes, DVMs, Power Supplies, Defib/Pacer Analyzers, custom fixtures etc. per procedures. Document inspection and test results according to established procedures. Maintain quality documentation files such as, Device History Records (DHR) and Inspection History Records. Process returned material to established procedures. Read and interpret documentation such as Standard Operating Procedures (SOP), schematics, technical drawings, PDAs and ECOs. Interface with other functions and departments as required. Required/Preferred Education and Experience High School Diploma Or equivalent. required 1-3 years experience in a related position. required Knowledge, Skills and Abilities Good written and oral communication skills. Ability to read specifications, procedures and engineering drawings. Familiar with use of mechanical and electronic test equipment. IPC-A-61OD for Incoming Inspection, preferred. Basic computer skills: Microsoft Office, Oracle and MES. Physical Demands Ability to lift up to 50 lbs. ZOLL is a fast-growing company that operates in more than 140 countries around the world. Our employees are inspired by a commitment to make a difference in patients's lives, and our culture values innovation, self-motivation and an entrepreneurial spirit. Join us in our efforts to improve outcomes for underserved patients suffering from critical cardiopulmonary conditions and help save more lives. #LI-LV1 The hourly pay rate for this position is: $24.00 to $25.00 Factors which may affect this rate include shift, geography, skills, education, experience, and other qualifications of the successful candidate. Details of ZOLL's comprehensive benefits plans can be found at ********************* Applications will be accepted on an ongoing basis until this position is filled. For fully remote positions, compensation will comply with all applicable federal, state, and local wage laws, including minimum wage requirements, based on the employee's primary work location. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, disability, or status as a protected veteran. ADA: The employer will make reasonable accommodations in compliance with the Americans with Disabilities Act of 1990.

Ashland Specialty Ingredients, GP Are you the kind of person who is always thinking, sketching, seeking, and adjusting? Who needs to understand how things work and then figure out how they can work better? Are you a passionate, tenacious, solver who loves to work with others who share your drive? Are you positive, constructive, and ingenious? Are you always solving? Then we'd like to meet you and bet you'd like to meet us. Ashland has an exciting opportunity for a QC Laboratory Technician to join our Life Sciences, Quality, and Regulatory team at Ashland Specialty Ingredients G.P. business at our Wilmington Aquarius manufacturing location. This is a very visible, significant role within the company and the Quality function. This position will report to the site's Quality Manager. This is a 3rd shift position. The responsibilities of the position include, but are not limited to, the following: Testing of raw materials, in-process control samples, and final products Analytical controls are applied to raw materials to verify identity and required quality. Understanding the equipment cleaning specifications is critical to preventing cross-contamination. Communicating results to production and process engineers. The use of the laboratory iLIMS tracking system (raw material samples, in-process samples, final samples, instrumentation calibration, and stability samples). Secondary responsibilities include process development support, process troubleshooting, analytical method development support, environmental samples, and quality systems support. Documentation consistent with good manufacturing practices (GMP). Calibration of analytical instrumentation. Scheduled testing associated with the stability program. Provide non-routine testing associated with corrective action and preventive action (CAPA) investigations, such as customer complaints, out-of-specification (OOS) investigations, product failures, and shelf-life extension requests. Other Quality Control Responsibilities Maintaining the raw material and final product retention systems. Assisting QC Supervision with maintaining laboratory supplies. Managing lab, sample, and chemical waste disposal. Follow the Chemical Hygiene Plan and practice good housekeeping and general lab maintenance. In order to be qualified for this role, you must possess the following: Associate's degree in Chemistry or related field Must be able to work 3rd shift and train on 1st shift Knowledge and understanding of analytical chemistry Knowledge and understanding of good manufacturing practices (GMP) Preferably 0-3 years in a chemical manufacturing environment Attention to detail Strong communication skills Strong computer skills, which include application knowledge of Microsoft Excel and Word Good organizational and documentation skills In more than 100 countries, the people of Ashland LLC. (NYSE: ASH) provide the specialty chemicals, technologies and insights to help customers create new and improved products for today and sustainable solutions for tomorrow. Our chemistry is at work every day in a wide variety of markets and applications, including architectural coatings, automotive, construction, energy, personal care and pharmaceutical. Visit *************** to see the innovations we offer. At Ashland our vision is to be a leading, global specialty chemicals company whose inspired and engaged employees add value to all we touch. In fact our people, employees, customers and vendors define who we are. They are the driving force behind everything we do. Not only do we value our customers but we value our employees, and we work to offer them a dynamic and challenging environment. We hold ourselves to high standards at Ashland, and we value integrity and honesty. Ashland has a history of attracting the best people and keeping them. The reasons are simple: industry competitive salary and benefits, pay-for-performance incentive plans and a diverse work environment where employees feel challenged and valued. People come to Ashland and stay. As a growing Fortune 500 specialty chemicals company, we offer opportunities for development and advancement throughout our global organization. Our values define who we are and what we care about as a company. If you are looking for a relationship with a company instead of simply a job, this may be a great fit. Ashland is proud to be an Equal Opportunity Employer Minorities/Women/Veterans/Disabled/Gender Identity/Sexual Orientation. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability. NOTE: We do not accept resumes from external staffing agencies or independent recruiters for any of our openings unless we have a signed recruiting agreement in place to fill a specific position.

Hourly Rate: Depending on Experience. About Us: We are a veteran owned contractor, providing project, maintenance, and outage support throughout the United States. Over the past 15 years we have proven to be a trusted partner for our clients while providing services that help power the world. Summary: We are looking for a skilled QA/QC lead. All applicants must be familiar with ASME Boiler and Pressure Vessel Code, welding processes, SMAW, GTAW and FCAW. Must be familiar with NDT methods, visual, magnetic particle, liquid penetrant, radiography experience helpful. Responsibilities: • Performs process/product quality evaluations, conducts special studies and projects as requested by Quality Engineers. • Investigates and recommends solutions to quality data collection systems problems. • Performs Product/Material certification activities. • Controls release and status of acceptable, suspect, and non-conforming material and products. • Responsible for the development and maintenance of QA record Retention Systems. • Must be able to work with minimal supervision and make independent sound judgments. • Must be able to perform detailed mechanical and visual inspections as required. • Perform Dedication activities per specifications, drawing or test plans on commercial grade products to upgrade to nuclear grade material. • Responsible for implementing QA requirements contained in Quality Planning, Engineering specifications, Order Entry • Documentation, Purchase Orders and applicable regulatory requirements. • Responsible for dedication inspection/testing of product and certifying this activity. • Provides accurate and timely data analysis to support requests from customer, supplier, or Engineering. • Periodically interacts with internal/external auditors, customers, and suppliers. Must establish and maintain effective working relationships with individuals, auditors, managers, suppliers, and customers. • Capable of performing complex inspections and tests on product and material using standard and special gages. • Other duties as assigned. Qualifications: • Proficient with standard computer software (MS Word and Excel) and be able to write detailed inspection reports while maintaining an organized system of files. • Must have basic understanding of statistics, algebra and trigonometry. • Must have a minimum of 1-year experience in the nuclear industry with a working knowledge of the requirements of 10CFR50, Appendix B and ANSI N45.2.. • Must be certified in the following: ANSI N45.2.6 Level II, MT & PT Level II and VT-1 Level II. • Self-motivated with good written and verbal communication skills with a positive team-oriented attitude is required. • Must have reliable transportation and be able to travel extensively with an unrestricted driver's license. • Must pass background screens and drug/alcohol testing as required by our customers, including randoms. • Non - US Citizens must hold current work visa or green card. • High School Diploma or GED Preferred Qualifications: (not required) • Minimum of 5 years' experience in Quality Assurance or Quality Control Activities. • Minimum of 5 years' experience in fabrication, welding, manufacturing or related field. • Minimum of 5 years' experience in Mechanical/Dimensional inspection. Physical Requirements: • Must be able to work in heightened environments. • Must be able to carry 20lbs. • Must be able to push, pull, lift, climb, and extend as required for the job. • Must be able to work in high heat environments. • Able to stand, bend & kneel for extended periods of time. • Able to lift 50lbs. • Able to work in a confined space/ highly congested work area. • Able to wear full body protective clothing, to include face shield. • Able to work in radiation control areas.

Job Description American Chrome and Chemicals (AC&C) is the only chrome chemical producer in the Americas. Operating 5 production facilities in the United States, we are the leading global producer of high-quality chromium chemicals for a variety of applications. Reliability, safety and environmental sustainability drive our business along with our experienced and knowledgeable manufacturing and commercial teams. AC&C produces the widest range of pigment grade chromic oxides in the world. Our oxide provides the most consistent color and has the tightest color specifications in the market today. In this role you will be responsible for providing accurate analysis of routine process samples, product samples, and special projects. Responsibilities: Advise plant supervision of off-specification material or unusual analytical results Learn and be familiar with all Quality Assurance Lab analytical procedures. Support the sites commitment to quality and in particular the ISO 9001 Quality Management System, Quality Objectives and other goals as applicable. Initiate action to report and prevent the occurrence of any non-conformity relating to the product, process, and quality system Perform special or fill-in analyses as required Accumulate data to determine plant operational trends Change daily work schedule to accommodate inventory, special samples, etc., when necessary. Analyze and maintain detailed records of all plant shipments. Provide information to customers as required. Conduct analysis as required to resolve customer quality issues. Provide all necessary analytical report forms including daily, weekly, and monthly production or regulatory reports. Prepare and /or be responsible for sample shipments, either local or overseas. Support and maintain compliance with all plant and corporate safety and environmental programs. Follow all site-specific safety policies and procedures Assist in establishing new test methods and review and updating older testing methods Requirements: 2-year Associate's Degree in Chemistry or related field (Bachelor's Degree preferred) Minimum 1-2 + years of laboratory analysis experience in an industrial laboratory environment Strong organizational skills and detail orientation Ability to identify, gather, analyze and evaluate data Proficient in MS Office (i.e. Excel, Access, etc.) Ability to work independently and as part of a team Sense of humor! Equipment primarily used: Spectrophotometer, ICP, Ion Chromatograph Precision lab balances Wet chemistry methods - moisture content, filtrations, titrations, etc. Inorganic chemistry methods Leco Sulfur Analyzer Additional information: Drug screen and physical are required after offer of employment. Job Type: Full-time Pay: $45,000.00 - $55,000.00 per year Benefits: 401(k) matching Dental insurance Employee assistance program Flexible spending account Health insurance Health savings account Life insurance Professional development assistance Safety equipment provided Vision insurance PTO M-F 8 hours Overtime when necessary Occasional weekends

is based at our Hampton Farms location in Elizabethtown, NC. Purpose: The quality assurance Supervisor of Hampton Farms is involved in the manufacture of food products intended for the consumer. The quality assurance Supervisor is a critical position in Hampton Farms food quality and safety for producing our peanut product. The quality assurance supervisor is trained in various areas pertaining to the job required. He / she will assume all duties as the quality assurance manager in his / her absence. This position will report to the Quality Manager. Essential Duties and Description: * Verify with the production scheduler what products are running at the beginning of each shift. * Must be able to complete work required paperwork, for example: QA documents, metal detector sheets, roasting peanuts report, and weight check sheets. Must also review quality control technician's paperwork. * Be able to collect samples for retains and for micro samples and be able to document. Send out samples for testing with proper paperwork. * Review daily roaster logs and validate roaster log data. Immediately report any out of validation conditions to the plant manager and quality manager. * Serve as Backup SQF Practitioner * Responsible for food safety every day, but primary responsibility if the if the Quality manager is out of the plant. Be able to determine if a product needs to be put on hold and document when product goes on hold or if product is reworked. * Serve on Food Safety team, Food defense team, hold team meetings and other responsibilities as defined. * Train QA techs on pre-operational sanitation inspections and GMP inspection. Review these results and take corrective actions if needed. * Must have intermediate computer skills to produce reports, programs, procedures, build files, and label printing * Complete Certificate of Analysis (COA) based on micro results for finished product. * Assist with maintaining files for Ingredient COAs, Kosher certificates, Organic Labeling, customer information, consumer complaints and shipment logs. * Maintaining Master Sanitation Schedule, Chemical Control Program, Sanitation Training and techniques. * Verify with production that all product produced meets Hampton Farms and customer quality standards. Monitor all specifications for raw materials and finished product * Participate in Quality audits * Assist Production Supervisors in any task that needs to be done. Skills and Competencies: * Run Customer complaint program * Knowledgeable of SOP's for all areas involved in food safety and quality. * Familiar with SSOP's for all areas * Expert on CCP's and validations * Manage lab equipment calibration * Expert on Peanut butter testing and capability of outside labs * Provide instruction and supervision to lab technicians * Manage Plant inspection program and pre-operational inspection programs * Knowledgeable of HACCP, SQF requirements * Ability to get certification of Food Safety & Sanitation courses * Complete PCQI Certification * Complete HACCP Certification * Complete courses for SQF practitioner * Participate in Food and Safety audits * Be able to conduct a Mock recall * Provide assistance to QA manager as requested * Provide timely Assistance to production for quality / food safety issues. root cause, corrective actions to keep line running safely * Able to handle confidential material and situations Measures for Success: * No recalls * Customer complaints completed within 30 days of receipt of problem material. * Weekly poundage goals achieved * Lab tests performed accurately with quick feedback on problems to production General Expected Behaviors Problem Solving: * Solution Oriented, works to solve problems or achieve outcome * If needed, find alternative ways to complete a task * Reacts to challenges by locating or providing solutions. * Responsible for identifying all requirements of a task, evaluates opportunities or strengths then takes the appropriate action as required. * Makes timely, well-considered decisions based on current data available and is flexible with scheduled work hours/shifts * Supports the team by offering to help with unexpected work as needed Safety: * Actively follows and ensures all company policies and procedures. * Engages other employees in setting high safety awareness standards. * Include safety emphasis in all employee meetings. * Wears proper PPE at all times Work Ethic: * Dependable and punctual to ensure company and workplace goals. * Treats everyone with respect and dignity. * Responds to challenges with a sense of urgency, informing other team members as required and acting accordingly. * Actively assesses information and identifies issues as necessary or required to ensure a friendly workplace. * Plans and aligns appropriate resources to accomplish company goals. Communication: * Good written and verbal skills and able to communicate in a clear and understanding manner. * Applies good questioning and listening skills to ensure understanding of information being shared. * Treats everyone with respect and dignity, even when he/she may not agree on opinions * Identifies barriers to communication and works towards eliminating barriers. Additional Sanitation Responsibilities: Assumes Primary Responsibility for Food Safety when the Quality Assurance Manager is out of the Plant. Education and Experience: Required: * High School diploma or equivalent(GED). Preferred Associate Degree in similar field Desired: * Experience with food manufacturing Principles and implementation. * 1-3 years' production manufacturing experience. * Must be able to work well both independently and collaboratively. Skills/Competencies: * Ability to clearly present recommendations/ideas and to summarize issues. * Ability to appropriately handle confidential material. Certificates, Licenses, Registrations: None Required Job Physical Demands: * Continuous standing in one location for long periods (2-3 hours before break) * Climbing :ladders, stairs, etc. -using feet and legs or hands and arms 1/3 of the time * Stooping: Bending body downward and forward by bending spine at the waist * Crouching: Bending the body downward and forward by bending legs and spine * Reaching: Extending hand(s) and arm(s) in any direction * Handling: Seizing, holding, grasping, turning, or otherwise working with hand or hands * Hearing: Perceiving the nature of sounds by ears * Depth Perception: Three‑dimensional vision. Ability to judge distances * Color Vision: Ability to identify and distinguish colors Work Environment * Combination of manufacturing environment along with duties that will require employee to work in a production/plant environment where physical hazards such as industrial equipment and forklifts may be present. EOE - Equal Opportunity Employer For Additional Information Visit: ********************

Who We're Looking For Hood Container Corporation is seeking an Experienced Quality Technician for our Wilmington, NC plant who will be responsible for conducting internal and external Quality Audits, documenting/reporting nonconformance's, responding to customer inquiries. Strong organizational, teamwork, and self-starter skills will lead you to success in this role. How You Will Contribute: Quality Tech will communicate with colleagues and teammates to have a strategic and first-in-class mentality. Assist with line verifications and line clearance verifications. Review/validate rejects and help problem-solve with production to reduce/eliminate using root cause analysis. Perform 1 st articles of inspection. Ensure the completion of all quality check sheets, production records and quality reject sheets daily. Assist Mock recalls as directed by Quality Lead. Maintain Quality Management System through daily walks and internal audits. Support all departments with internal and external quality concerns during a customer complaint. Support Management with all internal and external audits. Perform Quality/Data Entry daily tasks as needed. Must be able to work in high temperature & humidity conditions while wearing proper PPE including, but not limited to, hearing protection, steel toe shoes, and safety glasses. What it takes Computer Skills - Excel, Word, Quality System, and Inventory Mgmt. Software Excellent Observation and Organizational Skills Effective Communication (Oral/Written) and Training Skill Set HS Diploma/G.E.D. Required Preferred Experience in corrugated industry 1-3 years previous QA/QC experience Internal Auditor Certification/Training Familiarity with ISO 9001:2015, HAACP, SQF, or ASI cGMP Bilingual (English/Spanish) is a plus Why You'll Love Working at Hood Container: Career Growth: We support your development through on-the-job training and advancement opportunities. Supportive Culture: Join a team that values your contributions and encourages collaboration. Stable & Growing Industry: Be part of a company that's expanding in the sustainable packaging space. Our goal is to be a diverse workforce that is representative, at all job levels, of the citizens and customers we serve. We are committed to building a team that represents a variety of backgrounds, perspectives, and skills. Hood Container Corporation is a family-owned, Mill to Market company, specializing in containerboard and kraft paper, corrugated boxes, high graphic displays, and contract packaging. Our commitment to customer happiness, employee well-being, environmental stewardship, and operational excellence drive our business. Over the last decade, Hood Container Corporation has grown to become one of the top ten Paper and Packaging Companies in the United States. To learn more about Hood Container Corporation, visit ********************* or check us out on social media! INDMP

At GAF, we cover more than just buildings. We cover each other. Under this roof, you will have the tools and resources you need to grow and develop in your career. You will experience our incredible culture and will be empowered to support your teammates, your customers, and especially your community. Under this roof, we define the future while leading the present through our deep well of experience and our responsibility to the future to drive improvements and innovation in our products. We are GAF. And under this roof, we protect what matters most. Essential Duties Conduction interval quality checks and completing paperwork per SOP. Maintain and calibrate test equipment and gauges Work with Code Agency personnel to ensure conformance with quality standards and product requirements Providing production with technical advice pertaining to quality assurance and control as necessary. Check dimensions and finishes against blueprints or work order specifications Supervise and/or conduct rework activities on damaged product Support plant's compliance with company-wide initiatives Drive system audits for compliance and work with internal customers to ensure success Excellent communication skills with the ability to read and write in English Ability to operate forklift as needed Cross train in other departments and perform other duties as dictated by business needs Inspect coils loads, measure thickness, width; test hardness & check against specifications sheet from computer. Qualifications Required H.S. Diploma or General Education Degree (GED) Required 6+ months experience in Quality Control required Required Must be able to pass physical and drug screen. Ideal candidate must be flexible available to work overtime on short notice, ability to communicate, both written and orally, regarding recurring quality problems, quality audits and other production/quality issues. Physical Demands Stationary Position - Move/Traverse - Stationary Position/Seated - Transport/Lifting - Occasionally Transport/Carrying - Exerting Force/Pushing - Exerting Force/Pulling - Ascend/Descend - Balancing - Occasionally Position Self/Stooping - Occasionally Position Self/Kneeling - Occasionally Position Self/Crouching - Occasionally Position Self/Crawling - Occasionally Reaching - Handling - Grasping - Feeling - Communicate/Talking - Communicate/Hearing - Repetitive Motions - Coordination - Base salary and/or rate of pay ranges listed are exclusive of fringe benefits and potential bonuses. Individual compensation offers will be determined based on a variety of factors, including but not limited to geographic location, relevant candidate experience and skill, education, and/or qualifications.Base Hourly Rate: $23.43How We Protect What Matters Most:1. We offer a wide range of health insurance options that include medical, dental, and vision for you and your family. 2. Our Family-Building benefits support the many different journeys to fertility and parenthood. 3. Our robust 401K plan includes an employer match contribution with your pre-tax and/or Roth contributions. 4. Other exciting programs and perks are available to help employees achieve work-life balance, including (but not limited to) a wellness program, free financial coaching, a referral program, and product rebates when purchased for an employee's primary residence. 5. Professional growth and development are very important to us! We offer internal training programs and courses, as well as a generous tuition reimbursement program. 6. We're committed to fostering a culture that reflects our values to connect, empower, evolve, and inspire. We offer many opportunities for employees to connect with one another, including through our Employee Resource Groups who focus on education and allyship for all of our employees. GAF complies with federal, state, and local disability laws and makes reasonable accommodations for applicants and employees with disabilities. If a reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact HR Services at 833-HR-XPERT. We believe our employees are our greatest resource. We offer competitive salary, benefits, 401k, and vacation packages for all full time permanent positions. We are proud to be an equal opportunity workplace and GAF, Standard Logistics, SGI, and Siplast are proud to be affirmative action employers. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status. If you have a disability or special need that requires accommodation, please let us know. If applying for positions in the U.S., must be eligible to work in the U.S. without need for employer sponsored visa (work permit).

- ENGINEER TECH III RATE OF PAY - $18.00 EMPLOYEE CATEGORY - FULL TIME ABOUT OUR ROLE The Engineer III will perform general maintenance and repairs for assigned equipment and facilities including plumbing, electrical, basic carpentry, heating and cooling, and other building systems. Engineer III must work efficiently with minimal supervision and have a willingness to work as a team. ABOUT OUR VALUES We believe in GETMY Best - Guide, Excellence, Together, Magic, and Yes ESSENTIAL FUNCTIONS Maintain security and safety of all job sites and work areas for self, fellow workers, staff, guests, and any other person(s) possibly affected during performance of assignments. Completes daily inspections and maintenance on assigned buildings and rooms. Repairs plumbing, electrical, basic carpentry, heating and cooling, and other building systems as directed. Repair door locks to maintain building and/or room security per risk management standards. Repair Inspects room A/C filters on a regular schedule and determines if cleaning or replacement is warranted. Verifies accuracy of records for inspections and preventative maintenance work executed. Support keeping equipment in good working order. All other duties as assigned. QUALIFICATIONS Minimum Qualifications: A valid driver's license. At least 1 years' experience in general maintenance. Basic understanding of electrical, carpentry, painting, and plumbing. Experience in any other trades such as vehicle maintenance, welding, machine operation, etc. a plus. Must be able to read and write in English. Basic Competencies: High level of professionalism, able to follow instructions with follow-up, respect, and integrity. Understand oral and written communications, follow detailed directions, and provide clear instructions/directions. Basic skills such as: attention to detail skills, reasoning skills and multi-tasking and prioritization skills. Ability to use hand and power tools applicable to trade. PHYSICAL REQUIREMENTS Ability to lift and carry 50 lbs. Ability to climb and work from a ladder up to 40 feet from ground level. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to fingers, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl through; talk or hear; and taste or smell. The employee is occasionally required to sit. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. ABOUT OUR BENEFITS Company Benefits and Perks Full Time Part Time Seasonal Medical (with company contribution) Yes - - Dental (with company contribution) Yes - - Vision (with company contribution) Yes - - Paid Time Off Yes - - 401(k) (with company match) Yes Yes - Sick Time Yes Yes - Employee Dining Discounts Yes Yes Yes Employee Marketplace Discounts Yes Yes Yes SCHEDULE Hospitality demands a flexible schedule that may require extended hours as the business requires coverage including seasonality- on any day at any hour, including evenings, weekends, and holidays. The specific statements shown in each section of this Job Description are not intended to be all-inclusive. They represent typical elements and criteria considered necessary to perform the job successfully. The job's responsibilities/tasks may be modified and/or expanded over time without prior notice. The Company will try to give as much notice as practical when changes are made.

- ENGINEER TECH III RATE OF PAY - $18.00 EMPLOYEE CATEGORY - FULL TIME ABOUT OUR ROLE The Engineer III will perform general maintenance and repairs for assigned equipment and facilities including plumbing, electrical, basic carpentry, heating and cooling, and other building systems. Engineer III must work efficiently with minimal supervision and have a willingness to work as a team. ABOUT OUR VALUES We believe in GETMY Best - Guide, Excellence, Together, Magic, and Yes ESSENTIAL FUNCTIONS Maintain security and safety of all job sites and work areas for self, fellow workers, staff, guests, and any other person(s) possibly affected during performance of assignments. Completes daily inspections and maintenance on assigned buildings and rooms. Repairs plumbing, electrical, basic carpentry, heating and cooling, and other building systems as directed. Repair door locks to maintain building and/or room security per risk management standards. Repair Inspects room A/C filters on a regular schedule and determines if cleaning or replacement is warranted. Verifies accuracy of records for inspections and preventative maintenance work executed. Support keeping equipment in good working order. All other duties as assigned. QUALIFICATIONS Minimum Qualifications: A valid driver's license. At least 1 years' experience in general maintenance. Basic understanding of electrical, carpentry, painting, and plumbing. Experience in any other trades such as vehicle maintenance, welding, machine operation, etc. a plus. Must be able to read and write in English. Basic Competencies: High level of professionalism, able to follow instructions with follow-up, respect, and integrity. Understand oral and written communications, follow detailed directions, and provide clear instructions/directions. Basic skills such as: attention to detail skills, reasoning skills and multi-tasking and prioritization skills. Ability to use hand and power tools applicable to trade. PHYSICAL REQUIREMENTS Ability to lift and carry 50 lbs. Ability to climb and work from a ladder up to 40 feet from ground level. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to fingers, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl through; talk or hear; and taste or smell. The employee is occasionally required to sit. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. ABOUT OUR BENEFITS Company Benefits and Perks Full Time Part Time Seasonal Medical (with company contribution) Yes - - Dental (with company contribution) Yes - - Vision (with company contribution) Yes - - Paid Time Off Yes - - 401(k) (with company match) Yes Yes - Sick Time Yes Yes - Employee Dining Discounts Yes Yes Yes Employee Marketplace Discounts Yes Yes Yes SCHEDULE Hospitality demands a flexible schedule that may require extended hours as the business requires coverage including seasonality- on any day at any hour, including evenings, weekends, and holidays. The specific statements shown in each section of this Job Description are not intended to be all-inclusive. They represent typical elements and criteria considered necessary to perform the job successfully. The job's responsibilities/tasks may be modified and/or expanded over time without prior notice. The Company will try to give as much notice as practical when changes are made.