Quality assurance tester jobs in Youngstown, OH - 50 jobs

Hiring Company: Boar's Head Provisions Co., Inc. Responsible for overseeing product fabrication in assigned areas including adherence to risk assessment/control, and quality assessment and finished product food safety. Also responsible for assigned area's compliance to GMP's, SQF requirements, QCCP verifications, HACCP verifications, SSOP requirements, general USDA-FSIS regulations, and all company food safety requirements. Job Description: ESSENTIAL DUTIES AND RESPONSIBILITIES: Primary * Ensures product processes are being followed throughout the product's production cycle to include boxing and/or packing if applicable * Verifies and monitors SQF, GMP, HACCP, QCCP, and SSOP procedures are being followed. * Conducts process audits for quality and nutritional issues. * Assesses finished products for acceptability. * Conducts ongoing risk assessments, develops corrective actions, and monitors implementation and maintenance of corrective actions. * Conducts analyses of manufacturing systems for quality and food safety issues, identifies process weaknesses, develops corrective action, and monitors implementation and maintenance of corrective actions. * Assures compliance with all GMP, company food safety and quality policies, and USDA regulations. * Communicates with plant production management, QA Manager, and SQF Practitioner on all issues related to product quality and food safety. * Studies, identifies, and resolves other food safety and product quality problems as required. Secondary * Conducts analyses of manufacturing systems for quality and food safety issues, identifies process weaknesses, develops corrective action, and monitors implementation and maintenance of corrective actions. * Monitors per-operational and operational sanitation standards if needed. QUALIFICATIONS REQUIRED: * Bachelor's degree in a food science or related discipline, with one (1) to three (3) years experience in a meat-processing environment, OR * A combination of an Associates degree and three (3) to five (5) years experience in a meat-processing environment may be considered. OR * Five (5) to seven (7) years of experience or the combination of, in the fields of Meat-processing, Quality Assurance, and/or Research and Development. * A thorough knowledge of Food Safety and Quality is required. Location: New Castle, IN Time Type: Full time Department: FSQA

The Associate Quality Analyst is responsible for assisting with the preparation of routine product and quality inspections (including packaging), troubleshooting, and reporting. Essential Duties & Responsibilities: Assist in preparing quarterly reporting to provide insight into quality and packaging metrics for the department and vendors Assist in department analysis and reporting as needed. Work with cross functional team to drive vendor improvements through data, accountability, and leadership. Assisting leaders to maintain, refine and/or improve processes within the area to meet customer requirements which include deadlines and quality/package standards. Work with, and communicate as needed to the Stores, Concierge, PD, Buying, and the Distribution teams on issues that arise and determine next steps in order to eliminate future issues. Assist with issuing vendor chargebacks as needed and working with cross functional teams determine next steps for current inventory and future production. Communicate with internal and external team to ensure timely and effective problem resolution and go-forward action plan. Reads and understands job aids/work instructions and/or follows oral instructions to execute the overall objectives of reduced quality/packaging returns and improved customer satisfaction component flow requirements. Requirements: Associate's or Bachelor's degree in a relevant field such as: manufacturing, quality management or a related discipline is preferred Understanding of regulatory and performance, and/or transit testing which includes (but not limited to): CPSC, BFMA, UL, ETL, and GCC. (Preferred by not required) Must be proficient in Microsoft Excel, specifically in using functions, pivot tables, and data analysis. Must be proficient in Microsoft PowerPoint. Must have strong organizational skills and be able to balance various tasks/projects. Must have strong verbal and written communication skills. Must have strong analytical and problem-solving skills. Must have a high level of ethics, integrity, judgment, and confidentiality. Must have a valid driver's license. Must be able to travel domestically/internally as needed (>5% of time). Physical Demands: The characteristics listed below are representative of the physical demands required by an individual to successfully perform the essential duties of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties. Employee is regularly required to stand, walk, and sit; use hands and fingers to handle or feel; reach with hands and arms. Employee is frequently required to talk and/or hear. Specific vision abilities required by this job include close vision, color vision, depth perception, and ability to adjust focus. Requires use of computer, telephone and operation of a motor vehicle. Work Environment: The characteristics listed below are representative of the work environment typically encountered by an individual while performing the essential duties of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties. The noise level in the work environment is usually moderate and work is generally performed in a standard office environment. Occasional travel, including overnight travel, may be required. Must have reliable, appropriate transportation. Arhaus is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. Arhaus is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at Arhaus are based on business needs, job requirements, and individual qualifications, without regard to race, color, sex, sexual orientation, gender identity, religion or belief, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. Arhaus will not tolerate discrimination or harassment based on any of these characteristics. Arhaus encourages applicants of all ages.

360 IT Professionals is one of the fastest growing IT Staffing & Consulting Company in the Silicon Valley. In the ever-changing technological world 360 IT Professionals connects the best of IT professionals with the leading companies, day in- day out. The professional team on board uses its in-depth industry knowledge and insight to guide our consultants helping them bag both temporary and permanent assignments by anticipating the needs of leading tech companies. Today, 360 IT Professionals is recognized for its high quality IT staffing solutions, providing lean consulting methodologies and Information Technology implementation for Fortune 500 Companies Job Description We require QA testing and automation services for ongoing releases. The high level scope of the Services as part of Automation Testing includes Support any automation scripting/execution needs and any test data management needs on a need basis. Test case automation of any additional test cases as requested by customer Automated script execution Deliver Test Scripts and Test Results covering all functionalities tested Years of Experience 5+ yrs Mandatory skills Selenium, Java, Testing , Domain Retail Work Location Coraopolis, PA Additional Information Interested candidates can reach me on my number @ ************ Ext-122 M: ************

Your Opportunity as the Lead Analyst, IS Quality Assurance - PMO Demonstrate in-depth knowledge of Quality Assurance and lead and coach others on skills required to serve as a Quality Assurance Lead. Develop test plans, create tests scripts and provide test management for highly visible and critical projects at the company. Location: Orrville, OH (Close proximity to Cleveland/Akron) Work Arrangements: Hybrid - onsite a minimum of 9 days a month primarily during core weeks as determined by the Company; maybe more as business need requires In this role you will: Work on and lead various project deliverables including but not limited to: * Test plans, detailed test schedules, test environment plans * Own and facilitate the design, construction and execution of test cases/ test scenarios * Collaborate with Business Analysts to ensure requirements are testable and well defined * Analyze system architecture and designs testing strategy as appropriate * Create functional design in collaboration with IT development teams * Define and publish project testing metrics Lead testing efforts on PMO led projects: * Define test schedule through collaboration with Project Manager * Help to inform revisions to overall plan with Project Manager * Continue to revise plan and adapt to project changes with Project Manager * Manage cross-functional testing efforts with complex dependencies * Role model the use of standards and methodologies around testing management * Effectively manages the test schedule in alignment with triple constraint: Budget, Time, Scope Develop and promote testing best practices: * Leverage and enhance standard testing deliverables * Incorporate automated testing where appropriate to increase test coverage * Leverage and develop key testing metrics and dashboards * Proactively execute best practices regarding audit and security controls * Identify potential risks to delivery, both inside and outside of own workstream, identifying and presenting possible solutions Advancement of QA Profession: * Guide and mentor others to help advance quality assurance as a discipline, practice and profession * Seek opportunities to lead change and share knowledge The Right Place for You We are bold, kind, strive to do the right thing, we play to win, and we believe in a strong community that thrives together. Our culture is rooted in our Basic Beliefs, and we believe in supporting every employee by meeting their physical, emotional, and financial needs. What we are looking for: Minimum Requirements: * 5+ years of relevant work experience * Experience leading project management activities with a strong understanding of project management methodology * Proficiency with Microsoft Project and HP Application Lifecycle Management (ALM) * Proven ability to influence and shape outcomes through strong interpersonal and communication skills * Demonstrated ability to think critically and conceptually * Customer service mindset with a commitment to quality deliverables Learn more about working at Smucker: * Helping our Employees Thrive * Delivering on Our Purpose * Our Continued Commitment to Ensuring a Workplace for All Follow us on LinkedIn #LI-Hybrid

Gadget Shop was established in 1987, and remains one of the largest international widget manufacturers. We have solid career opportunities, and are looking for quality employees that will share in our success. The Account Executive will develop sales programs, implement strategies, set targets and prepare an annual budget. This position will report to the Sales Director. In addition, the Sales Associate will provide information about the products and services of the company to it's clients in order to increase the sales of the company, and provide support in developing long-term relationships with the clients. Some other duties of a sales associate are assisting in the development and execution of sales programs, and supporting the technical team by providing the details of requirements of the customers. Duties and Responsibilities Should have full knowledge of customers and product. Keeping the focus on customers planning the sales strategies and setting targets. Directing and coordinating the marketing team with valuable information about the customers and product. Making the product visible in the market through publications, events and networking relations. Providing the management with research inputs, creative solutions and ideas. Developing sales plans and reporting the details of its implementation to the management. Participating in events, trade fairs, campaigns and conferences relating to the product or industry. Estimating customers on quotes quickly and accurately. Providing with leads for follow-up to the senior executives of company. Renew the existing accounts of customers with required details of service or pricing. Working with current clients in finding opportunities for new customers that may have a need for our products Maintain customer database for associated mailings, development, and marketing outreach opportunities Prepare renewal contracts and quotes for existing clients. Working on special projects with the team or as a part of team. Collecting feedback from clients to access possible improvements to existing products and also the need for new products. Provide the management with sales quotes. Qualifications Ability to function within a team environment or independently, Ability to determine prospective customers Self-starter Good organizational and management skills Must have customer service experience Ability to understand the client's business needs and address their problems Must possess good communication skills, both oral and written Must possess the ability to develop and maintain good relationships with clients Other Requirements Bachelor's degree in Sales and Marketing or related field 1-2 years of experience in sales related field JOB CODE: 9868

Title: QA Performance Engineer Type: contract (6+ months) with extension Rate: $Open Requirements MINIMUM QUALIFICATIONS Undergraduate degree in Computer Science or a related field or equivalent work experience Certification preferred, but not required (CSQA, CSTE, CSQE, CTM, CSTP, etc.) Recent Performance Testing experience, with primary job function as Performance testing 2+ years in manual software testing 3+ years testing applications using Hewlett-Packard/Mercury testing tools (LoadRunner, Quick Test Professional, Quality Center) 2+ years of Programming / Scripting (C, C#, JavaScript, VBScript) First-hand experience with a wide variety of LoadRunner protocols, such as Adobe Flex/RIA, COM/DCOM, and Web (HTTP/HTML) Demonstrated knowledge of SQL Server and Oracle, query building and data extraction tools Effective in a fast paced environment Collaborative/enjoys working in teams Self-starter/motivator Creative and effective problem solving skills Ability to multi-task Highly organized and strong attention to detail Excellent written and verbal communication skills Benefits Note: If interested please send your updated resume ******************************* and include your rate requirement along with your contact details with a suitable time when we can reach you. If you know of anyone in your sphere of contacts, who would be a perfect match for this job then, we would appreciate if you can forward this posting to them with a copy to us.

Proven to Perform. From the edges of space to the bottoms of ocean, our materials are proven to perform -- and so is our team. We're hiring high performers as proven as our products. Join us. ATI is seeking to hire a Quality Assurance Intern for Summer 2026. The ideal candidate will have an interest in statistics, Operational Excellence, or Continuous Improvement type work. This role will primarily work at our Monaca, Rochester, Zelienople, and Washington, PA locations. Essential Functions Setting Up, Conducting, and Interpreting Measurement System Analysis for critical production measuring devices or analytical lab equipment Standardizing work-such as creating / revising operations procedures and/or control plans

Proven to Perform. From the edges of space to the bottoms of ocean, our materials are proven to perform -- and so is our team. We're hiring high performers as proven as our products. Join us. ATI is seeking to hire a Quality Assurance Intern for Summer 2026. The ideal candidate will have an interest in statistics, Operational Excellence, or Continuous Improvement type work. This role will primarily work at our Monaca, Rochester, Zelienople, and Washington, PA locations. Essential Functions Setting Up, Conducting, and Interpreting Measurement System Analysis for critical production measuring devices or analytical lab equipment Standardizing work-such as creating / revising operations procedures and/or control plans

Automation Controls Engineer For more than 150 years, Morgan has been committed to offering world class solutions for the metals industry. At Morgan, we position our customers for success by collaborating with them to enhance safety, improve efficiency, and deliver value through the world's most advanced material handling systems-while building a better future for our employees and community. Due to growth, we are looking for a full-time Automation Controls Engineer to join our team in Alliance, Ohio. You will develop and test software for automation systems in heavy industrial environments while ensuring that innovation comes standard with every order. Join our team to help us fulfill our vision: To challenge the possibilities of today by thinking differently. Responsibilities: Define and implement solutions for project system requirements and develop system specifications for industrial drive and automation systems Develop and test control software for PC, Allen Bradley and Siemens PLC based systems for overhead cranes, metal rolling, strip processing and rod/bar mill applications Recommend changes to unit and integration test plan elements as necessary Manage project cost budget Must be willing to travel as needed Must be able to work at heights Perform network connectivity troubleshooting Education/Experience: Bachelor's degree in mechanical or electrical engineering, or a relevant technical field-Or equivalent experience 3 years' experience in designing, commissioning, and maintaining industrial drive and automation systems for heavy industry applications 1 year of experience with programmable logic controllers Strong communication skills and attention to detail Proficient in AutoCAD Proficient with MS Office (Access, Excel, Word, PowerPoint, Outlook) Benefits: Competitive wages Comprehensive benefits package, including: Health insurance Dental insurance Vision insurance Life insurance 401(K) 401(K) matching Paid time off About Morgan: For more than 150 years, Morgan Engineering has created a legacy as a world leader in material handling systems. Through the design, production and service of large-scale industrial overhead and gantry-type cranes and mill equipment, we provide the innovative technology and engineering expertise to move our clients' businesses forward. To learn more about our company or apply for this position, visit ************************** Disclaimer: Morgan Engineering provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Shift: 1st shift City: Solon Swagelok, Northeast Ohio, USA Swagelok is a global organization and one of the largest employers of manufacturing talent in Northeast Ohio. We are driven by our core values of Quality, Integrity, Respect for the Individual, Customer Focus, Innovation, and Continuous Improvement, which are demonstrated through our daily actions. For 75 years, our dedication to our core values has been the foundation for our success. Our products have been up into space, down to the bottom of the ocean, and everywhere in between. That same dedication spans to our customers. Throughout our organization we demonstrate a commitment to these values and those we bring onboard. Whether you want to grow in your role or explore broad opportunities and develop new skills-you'll thrive in a culture that promotes learning and development. We strive to be a company where we all can do our best work with a true sense of purpose and belonging. Be Connected. Be Valued. Be You. We hope you'll consider joining our team. Automation Engineer - Quality / Metrology Integration Focus Position Summary The Automation Engineer - Plays a critical role in advancing automated quality assurance for machined components. This position focuses on developing and integrating automated inspection, process-capability analysis, and in-process quality controls that minimize the risk of non-conforming parts during extended unattended production. The engineer combines strong machining-quality experience with the ability to automate quality measurements and program inspection systems, enabling advanced process control and prevention techniques within our global automation strategy. While the primary emphasis is on quality and metrology automation, the role will also gain exposure to general machine-level automation such as robotic machine tending, data integration, and control-system interfaces. Essential Duties & Responsibilities Automated Quality Responsibilities Lead and provide guidance / training on process capability (Cp, Cpk) for machined parts and identify improvement opportunities. Lead discussions and oversee updating Process Quality Plans (PQP, APQP) to reflect automation-based prevention and detection methods. Develop and evaluate scalable prevention-vs-detection strategies to ensure stable and capable processes during unattended machining. Lead and maintain PFMEAs to identify, quantify, and mitigate process risks related to automated machining and inspection. Recommend best practices for designing and acquiring gages, measurement systems, and data collection systems. Program, calibrate, and maintain Keyence digital gages and other automated metrology devices; create new inspection programs and modify existing ones; design, execute, and analyze validation (gage R&R) of new / modified inspection programs Integrate in-process, post-process, and vision-based inspection systems that provide immediate feedback to machines and operators. Provide guidance and training on statistical methods (SPC, trend analysis, frequency optimization, sample size) to determine appropriate inspection intervals and trigger points. Collaborate closely with machinists, quality engineers, and automation teams to ensure part-quality verification occurs as early and efficiently as possible in the process. Design, lead execution, and analyze equivalency / correlation and validation studies to confirm that automated measurements align with traditional quality inspection systems. Drive initiatives that reduce the likelihood of producing non-conforming parts during unmanned or lightly monitored shifts. Automation & Systems Integration Responsibilities Support the development of automation concepts that integrate quality measurement and process feedback loops. Assist in implementing and troubleshooting automation components such as sensors, robots, or PLC interfaces used to enable automated quality checks. Contribute to system testing, documentation, and continuous improvement of automation standards. Collaborate cross-functionally with Operations, IT, Sourcing, and Quality teams to ensure successful deployment of automation and quality initiatives. Over time, expand capability in PLC programming, robotic integration, and overall controls engineering to broaden impact across the automation strategy. Education and Work Experience Requirements Education Required: B.S. in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering, Mechatronics, Automation Engineering, or a related technical discipline. Experience Required: Minimum 2-3 years of quality experience in a machining or precision manufacturing environment, with hands-on familiarity with automated inspection equipment. Proven ability to: Perform process-capability and SPC analyses and interpret results. Develop or modify Process Quality Plans (PQP/APQP) and PFMEAs. Program and troubleshoot Keyence or comparable digital gages for automated inspection. Understand machining operations, dimensional inspection methods, and gage-R&R principles. Preferred / Growth Areas: Basic understanding of PLC or robot integration for automated measurement systems. Exposure to pneumatic, electrical, or mechanical system design. Experience with CAD (SolidWorks preferred) and data-analysis tools such as Ignition or FT View. ASQ CQE or Six-Sigma Black Belt Certification Critical Competencies Quality Mindset & Statistical Thinking - Applies data-driven problem solving to ensure process stability and capability. Teamwork and Collaboration - Works effectively with machinists, quality engineers, and automation peers. Continuous Learning & Change Enablement - Eager to expand automation knowledge while championing new quality methods. Resilience - Maintains focus and problem-solving discipline in a dynamic production environment. Swagelok provides a comprehensive package of valuable benefits called Total Rewards focused on health and wellness, compensation, retirement planning, and supplemental rewards. To apply: 1. Click ‘Apply Now' to the role of interest, upload your resume and complete the application. 2. Those that match our qualifications will be contacted to schedule a phone interview. Congratulations on taking the first step to Be Connected. Be Valued. Be You. Swagelok is proud to be an Equal Opportunity Employer. Applicants are selected without regard to race, ethnicity, creed, color, religion, sex, pregnancy, pregnancy-related medical conditions, age, national origin or ancestry, disability, genetic information, veteran/military status, sexual orientation, gender identity, or other protected characteristic under federal, state or local law. Swagelok will make reasonable accommodations in compliance with the Americans with Disabilities Act of 1990, the Americans with Disabilities Act Amendments Act of 2008, and Ohio state law. This job summary is intended to be brief and does not list all the duties for this position. Nothing in this job description should be construed as an express or implied contract of employment. Swagelok is an at-will employer, which means that either party is free to terminate the employment relationship at any time, without any advanced notice, for any reason or no reason.

Job DescriptionWhat's in it for me: • Since 1992, my client has supplied machinery process control, measurement, and information systems that are engineered to meet the demands of everyday use within industrial manufacturing environments. • Work with full autonomy • Great work culture • Have your contributions recognized • Work with a sharp, energetic team What you'll do: In-house engineering functions to support new orders including: Programming FACTS System, PLC's & HMI's Electrical design & documentation Setup and configure drives Test and debug equipment prior to shipment Support start-up and commissioning of FACTS systems at customer facilities. ~30% travel - domestic and international Customer Support activities including: On site field service and customer training In house technical support Troubleshooting, diagnose and repair Customer follow up • Prepare and update documentation as necessary. • Support after hours Customer Support pager rotation Experience you'll need: • BSEE or equivalent relevant work experience. • Five years minimum of hands-on experience - automation systems for industrial process control. Experience with PLC's, HMI's and drive systems. • Ability to read and interpret electrical schematic drawings • Mechanically inclined • Computer proficiency - troubleshooting PCs and peripheral equipment. • Willingness to travel to both domestic and international locations - 30% average • Organized and detailed oriented • Ability to work independently.

We are seeking a talented Software Test Engineer to join our team in managing automated test systems. This position involves collaborating with multiple engineering teams to enhance the quality and reliability of our testing processes. Responsibilities * Triaging nightly test failures and adapting to changes made in development. * Collecting test results and running analytics on results and failures. * Maintaining existing tests to ensure they are up to date and effective. * Working closely with various engineering teams to identify and resolve testing issues. * Building Python and TypeScript files to automate firmware deployment and testing. * Deploying firmware into embedded devices and conducting recovery and troubleshooting. * Utilizing test and measurement equipment effectively. Essential Skills * Proficiency in Python and TypeScript. * Experience with DevOps practices and tools. * Knowledge of GitHub and test automation. * Understanding of embedded firmware systems. * Familiarity with test and measurement equipment. Additional Skills & Qualifications * Degree in Computer Science, Electrical Engineering, or a related field. * Minimum of one year of applicable experience, including co-ops or internships. Work Environment The work environment involves collaborating with a dynamic team of engineers, utilizing cutting-edge technologies and equipment. The role may require adapting to a fast-paced setting, with a focus on innovation and problem-solving. Job Type & Location This is a Contract to Hire position based out of Solon, OH. Pay and Benefits The pay range for this position is $35.00 - $40.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Solon,OH. Application Deadline This position is anticipated to close on Jan 23, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Our Company ResCare Community Living Conducts case file record reviews for compliance with regulations/company processes and identifies opportunities for improvement or corrective actions to ensure contractual performance expectations. Responsibilities Conducts Site Reviews at locations as assigned and submit results. Participate in the Pre-Survey Review process. Review incident reporting and initiate follow up when needed. Participate in follow up with Corrective action plans (survey, audits, etc) Submit weekly QA reports in a timely manner to Quality Assurance Manager/Supervisor. Present feedback to management regarding areas that need improvement. Ensure all clients receive a return call within 24 hours of calling. Review quality assurance standards, studies existing policies and procedures and interviews personnel and patients to evaluate effectiveness of quality assurance programs. Implement and monitor standard operating procedures. Other duties as assigned. Qualifications Associates degree in Human Services, education, psychology, sociology or related field required. Bachelor's degree preferred. Minimum two plus years related experience Demonstrated knowledge of quality assurance procedures and federal, state and local coalition laws and mandates Demonstrated knowledge of computers and knowledge of data management processes Demonstrated knowledge of eligibility determination processes and filing procedures About our Line of Business ResCare Community Living, an affiliate of BrightSpring Health Services, has five decades of experience in the disability services field, providing support to individuals who need assistance with daily living due to an intellectual, developmental, or cognitive disability. We provide a comprehensive range of high-quality services, including: community living, adult host homes for adults regardless of disability, behavioral/mental health support, in-home pharmacy solutions, telecare and remote support, supported employment and training programs, and day programs. For more information, please visit ******************************* Follow us on Facebook and LinkedIn. Additional Job Information This is a salary position Salary Range USD $21.10 / Hour

Full-time Description Since 1971, Presrite Corporation has been providing world class forging solutions to our customers. We have three modern manufacturing plants plus a dedicated technical division for our engineering and die making capabilities, all centrally located in northeast Ohio. Press sizes range from 1,300 to 6,000 tons, forging approximately 125,000 tons of steel annually. Forgings we provide range from 2 to 300 pounds, all produced to the latest International quality standards. Our customers span many diverse markets: off-highway, agriculture, military, rail, oil and mining--just to name a few. Presrite has helped our world move uninterrupted, one forging at a time, for over 50 years. If you are looking for a role in an innovative and industry leading company, we have a great opportunity for you. We are currently seeking qualified candidates for the Quality Engineer position at our E78th forge plant in Cleveland, OH, reporting directly to the Quality Manager. JOB SUMMARY: The Automation Engineer assists in process improvement projects, and will contribute to the efficient operation, optimization, and continuous improvement of automated manufacturing systems. The Automation Engineer is responsible for the design, budget, project management and installation of new equipment and processes to sustain continued growth. This position will provide overall project management leadership to include planning, organizing, monitoring, and directing work activities to complete assigned projects; and to coordinate and communicate objectives with a focus on process improvement. Periodic travel to other Presrite locations and suppliers maybe required. Requirements MAJOR JOB RESPONSIBILITIES (not all inclusive) · Assist in preventive maintenance program. · Design, develop, implement, and maintain automation systems to improve efficiency and consistency. · Responds to inquiries about projects, provides updates and reports to management. · Identify and implement improvements to automation systems to enhance efficiency, reduce downtime, and optimize production processes. · Work closely with production teams to implement upgrades and process enhancements. · Collaborate with engineering, production, and maintenance teams to ensure seamless integration of automated systems. · Develop and maintain documentation, including system designs, programming files, and operating procedures. · Provide training and technical support to maintenance teams and operators on PLC programming, control system troubleshooting, and automation systems as needed. · Assist with the programming, integration, and troubleshooting of robotic systems to ensure seamless interaction between robots and PLC-controlled. · Performs other duties as assigned to support process improvements to continue sustained growth. · Supports all Presrite locations as needed. Minimum Qualifications: · BS Degree in Mechanical Engineering, Automation Engineering, or Electrical Engineering. · Minimum of 3 years of experience in automation engineering, to include robotics and PLC programming, preferably in steel forging or related manufacturing environments. · Demonstrate strong knowledge of safety regulations and best practices. · Proficient in Microsoft Office products. · Strong written and verbal communication skills. · PLC programming, reading and modifying electrical control schematics, machine integration, and electrical troubleshooting skills. No phone calls or third-party recruiters, please. Employment Ready Applicants Only. The above information on this description has been designed to indicate the general nature and level of work. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of an associate assigned to this position Presrite is an Equal Opportunity Employer. Employment contingent upon successful completion of background investigation. Pre-employment drug screening is required. The Company participates in E-Verify. E-Verify is an internet-based system that compares information from an employee's Form I-9, Employment Eligibility Verification, to data from U.S. Department of Homeland Security and Social Security Administration records to confirm employment eligibility. *********************

The Associate Quality Analyst is responsible for assisting with the preparation of routine product and quality inspections (including packaging), troubleshooting, and reporting. Essential Duties & Responsibilities: * Assist in preparing quarterly reporting to provide insight into quality and packaging metrics for the department and vendors * Assist in department analysis and reporting as needed. * Work with cross functional team to drive vendor improvements through data, accountability, and leadership. * Assisting leaders to maintain, refine and/or improve processes within the area to meet customer requirements which include deadlines and quality/package standards. * Work with, and communicate as needed to the Stores, Concierge, PD, Buying, and the Distribution teams on issues that arise and determine next steps in order to eliminate future issues. * Assist with issuing vendor chargebacks as needed and working with cross functional teams determine next steps for current inventory and future production. * Communicate with internal and external team to ensure timely and effective problem resolution and go-forward action plan. * Reads and understands job aids/work instructions and/or follows oral instructions to execute the overall objectives of reduced quality/packaging returns and improved customer satisfaction component flow requirements. Requirements: * Associate's or Bachelor's degree in a relevant field such as: manufacturing, quality management or a related discipline is preferred * Understanding of regulatory and performance, and/or transit testing which includes (but not limited to): CPSC, BFMA, UL, ETL, and GCC. (Preferred by not required) * Must be proficient in Microsoft Excel, specifically in using functions, pivot tables, and data analysis. * Must be proficient in Microsoft PowerPoint. * Must have strong organizational skills and be able to balance various tasks/projects. * Must have strong verbal and written communication skills. * Must have strong analytical and problem-solving skills. * Must have a high level of ethics, integrity, judgment, and confidentiality. * Must have a valid driver's license. * Must be able to travel domestically/internally as needed (>5% of time). Physical Demands: The characteristics listed below are representative of the physical demands required by an individual to successfully perform the essential duties of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties. * Employee is regularly required to stand, walk, and sit; use hands and fingers to handle or feel; reach with hands and arms. * Employee is frequently required to talk and/or hear. * Specific vision abilities required by this job include close vision, color vision, depth perception, and ability to adjust focus. * Requires use of computer, telephone and operation of a motor vehicle. Work Environment: The characteristics listed below are representative of the work environment typically encountered by an individual while performing the essential duties of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties. * The noise level in the work environment is usually moderate and work is generally performed in a standard office environment. * Occasional travel, including overnight travel, may be required. * Must have reliable, appropriate transportation. Arhaus is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. Arhaus is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at Arhaus are based on business needs, job requirements, and individual qualifications, without regard to race, color, sex, sexual orientation, gender identity, religion or belief, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. Arhaus will not tolerate discrimination or harassment based on any of these characteristics. Arhaus encourages applicants of all ages.

Gadget Shop was established in 1987, and remains one of the largest international widget manufacturers. We have solid career opportunities, and are looking for quality employees that will share in our success. The Account Executive will develop sales programs, implement strategies, set targets and prepare an annual budget. This position will report to the Sales Director. In addition, the Sales Associate will provide information about the products and services of the company to it's clients in order to increase the sales of the company, and provide support in developing long-term relationships with the clients. Some other duties of a sales associate are assisting in the development and execution of sales programs, and supporting the technical team by providing the details of requirements of the customers. Duties and Responsibilities Should have full knowledge of customers and product. Keeping the focus on customers planning the sales strategies and setting targets. Directing and coordinating the marketing team with valuable information about the customers and product. Making the product visible in the market through publications, events and networking relations. Providing the management with research inputs, creative solutions and ideas. Developing sales plans and reporting the details of its implementation to the management. Participating in events, trade fairs, campaigns and conferences relating to the product or industry. Estimating customers on quotes quickly and accurately. Providing with leads for follow-up to the senior executives of company. Renew the existing accounts of customers with required details of service or pricing. Working with current clients in finding opportunities for new customers that may have a need for our products Maintain customer database for associated mailings, development, and marketing outreach opportunities Prepare renewal contracts and quotes for existing clients. Working on special projects with the team or as a part of team. Collecting feedback from clients to access possible improvements to existing products and also the need for new products. Provide the management with sales quotes. Qualifications Ability to function within a team environment or independently, Ability to determine prospective customers Self-starter Good organizational and management skills Must have customer service experience Ability to understand the client's business needs and address their problems Must possess good communication skills, both oral and written Must possess the ability to develop and maintain good relationships with clients Other Requirements Bachelor's degree in Sales and Marketing or related field 1-2 years of experience in sales related field JOB CODE: 9868

**Shift:** 1st shift **City:** Solon Swagelok, Northeast Ohio, USA Swagelok is a global organization and one of the largest employers of manufacturing talent in Northeast Ohio. We are driven by our core values of Quality, Integrity, Respect for the Individual, Customer Focus, Innovation, and Continuous Improvement, which are demonstrated through our daily actions. For 75 years, our dedication to our core values has been the foundation for our success. Our products have been up into space, down to the bottom of the ocean, and everywhere in between. That same dedication spans to our customers. Throughout our organization we demonstrate a commitment to these values and those we bring onboard. Whether you want to grow in your role or explore broad opportunities and develop new skills-you'll thrive in a culture that promotes learning and development. We strive to be a company where we all can do our best work with a true sense of purpose and belonging. **Be** Connected. **Be** Valued. **Be** You. We hope you'll consider joining our team. Automation Engineer - Quality / Metrology Integration Focus **Position Summary** The Automation Engineer - Plays a critical role in advancing automated quality assurance for machined components. This position focuses on developing and integrating automated inspection, process-capability analysis, and in-process quality controls that minimize the risk of non-conforming parts during extended unattended production. The engineer combines strong machining-quality experience with the ability to automate quality measurements and program inspection systems, enabling advanced process control and prevention techniques within our global automation strategy. While the primary emphasis is on quality and metrology automation, the role will also gain exposure to general machine-level automation such as robotic machine tending, data integration, and control-system interfaces. Essential Duties & Responsibilities **Automated Quality Responsibilities** + Lead and provide guidance / training on process capability (Cp, Cpk) for machined parts and identify improvement opportunities. + Lead discussions and oversee updating Process Quality Plans (PQP, APQP) to reflect automation-based prevention and detection methods. + Develop and evaluate scalable prevention-vs-detection strategies to ensure stable and capable processes during unattended machining. + Lead and maintain PFMEAs to identify, quantify, and mitigate process risks related to automated machining and inspection. + Recommend best practices for designing and acquiring gages, measurement systems, and data collection systems. + Program, calibrate, and maintain Keyence digital gages and other automated metrology devices; create new inspection programs and modify existing ones; design, execute, and analyze validation (gage R&R) of new / modified inspection programs + Integrate in-process, post-process, and vision-based inspection systems that provide immediate feedback to machines and operators. + Provide guidance and training on statistical methods (SPC, trend analysis, frequency optimization, sample size) to determine appropriate inspection intervals and trigger points. + Collaborate closely with machinists, quality engineers, and automation teams to ensure part-quality verification occurs as early and efficiently as possible in the process. + Design, lead execution, and analyze equivalency / correlation and validation studies to confirm that automated measurements align with traditional quality inspection systems. + Drive initiatives that reduce the likelihood of producing non-conforming parts during unmanned or lightly monitored shifts. **Automation & Systems Integration Responsibilities** + Support the development of automation concepts that integrate quality measurement and process feedback loops. + Assist in implementing and troubleshooting automation components such as sensors, robots, or PLC interfaces used to enable automated quality checks. + Contribute to system testing, documentation, and continuous improvement of automation standards. + Collaborate cross-functionally with Operations, IT, Sourcing, and Quality teams to ensure successful deployment of automation and quality initiatives. + Over time, expand capability in PLC programming, robotic integration, and overall controls engineering to broaden impact across the automation strategy. **Education and Work Experience Requirements** **Education** + Required: B.S. in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering, Mechatronics, Automation Engineering, or a related technical discipline. **Experience** + Required: Minimum 2-3 years of quality experience in a machining or precision manufacturing environment, with hands-on familiarity with automated inspection equipment. + Proven ability to: + Perform process-capability and SPC analyses and interpret results. + Develop or modify Process Quality Plans (PQP/APQP) and PFMEAs. + Program and troubleshoot Keyence or comparable digital gages for automated inspection. + Understand machining operations, dimensional inspection methods, and gage-R&R principles. + Preferred / Growth Areas: + Basic understanding of PLC or robot integration for automated measurement systems. + Exposure to pneumatic, electrical, or mechanical system design. + Experience with CAD (SolidWorks preferred) and data-analysis tools such as Ignition or FT View. + ASQ CQE or Six-Sigma Black Belt Certification Critical Competencies + Quality Mindset & Statistical Thinking - Applies data-driven problem solving to ensure process stability and capability. + Teamwork and Collaboration - Works effectively with machinists, quality engineers, and automation peers. + Continuous Learning & Change Enablement - Eager to expand automation knowledge while championing new quality methods. + Resilience - Maintains focus and problem-solving discipline in a dynamic production environment. Swagelok provides a comprehensive package of valuable benefits called Total Rewards focused on health and wellness, compensation, retirement planning, and supplemental rewards. To apply: 1. Click 'Apply Now' to the role of interest, upload your resume and complete the application. 2. Those that match our qualifications will be contacted to schedule a phone interview. Congratulations on taking the first step to **B** e Connected. **B** e Valued. **B** e You. _Swagelok is proud to be an Equal Opportunity Employer. Applicants are selected without regard to race, ethnicity, creed, color, religion, sex, pregnancy, pregnancy-related medical conditions, age, national origin or ancestry, disability, genetic information, veteran/military status, sexual orientation, gender identity, or other protected characteristic under federal, state or local law._ _Swagelok will make reasonable accommodations in compliance with the Americans with Disabilities Act of 1990, the Americans with Disabilities Act Amendments Act of 2008, and Ohio state law. _ _This job summary is intended to be brief and does not list all the duties for this position. Nothing in this job description should be construed as an express or implied contract of employment. Swagelok is an at-will employer, which means that either party is free to terminate the employment relationship at any time, without any advanced notice, for any reason or no reason. _

Job Title: Software Test EngineerJob Description We are seeking a talented Software Test Engineer to join our team in managing automated test systems. This position involves collaborating with multiple engineering teams to enhance the quality and reliability of our testing processes. Responsibilities + Triaging nightly test failures and adapting to changes made in development. + Collecting test results and running analytics on results and failures. + Maintaining existing tests to ensure they are up to date and effective. + Working closely with various engineering teams to identify and resolve testing issues. + Building Python and TypeScript files to automate firmware deployment and testing. + Deploying firmware into embedded devices and conducting recovery and troubleshooting. + Utilizing test and measurement equipment effectively. Essential Skills + Proficiency in Python and TypeScript. + Experience with DevOps practices and tools. + Knowledge of GitHub and test automation. + Understanding of embedded firmware systems. + Familiarity with test and measurement equipment. Additional Skills & Qualifications + Degree in Computer Science, Electrical Engineering, or a related field. + Minimum of one year of applicable experience, including co-ops or internships. Work Environment The work environment involves collaborating with a dynamic team of engineers, utilizing cutting-edge technologies and equipment. The role may require adapting to a fast-paced setting, with a focus on innovation and problem-solving. Job Type & Location This is a Contract to Hire position based out of Solon, OH. Pay and Benefits The pay range for this position is $35.00 - $40.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Solon,OH. Application Deadline This position is anticipated to close on Jan 22, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

Job Title: Software Test EngineerJob Description We are seeking a talented Software Test Engineer to join our team in managing automated test systems. This position involves collaborating with multiple engineering teams to enhance the quality and reliability of our testing processes. Responsibilities + Triaging nightly test failures and adapting to changes made in development. + Collecting test results and running analytics on results and failures. + Maintaining existing tests to ensure they are up to date and effective. + Working closely with various engineering teams to identify and resolve testing issues. + Building Python and TypeScript files to automate firmware deployment and testing. + Deploying firmware into embedded devices and conducting recovery and troubleshooting. + Utilizing test and measurement equipment effectively. Essential Skills + Proficiency in Python and TypeScript. + Experience with DevOps practices and tools. + Knowledge of GitHub and test automation. + Understanding of embedded firmware systems. + Familiarity with test and measurement equipment. Additional Skills & Qualifications + Degree in Computer Science, Electrical Engineering, or a related field. + Minimum of one year of applicable experience, including co-ops or internships. Work Environment The work environment involves collaborating with a dynamic team of engineers, utilizing cutting-edge technologies and equipment. The role may require adapting to a fast-paced setting, with a focus on innovation and problem-solving. Job Type & Location This is a Contract to Hire position based out of Solon, OH. Pay and Benefits The pay range for this position is $35.00 - $40.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Solon,OH. Application Deadline This position is anticipated to close on Jan 23, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.