Quality control analyst jobs in Columbia, SC - 26 jobs

Ready to be pushed beyond what you think you're capable of? At Coinbase, our mission is to increase economic freedom in the world. It's a massive, ambitious opportunity that demands the best of us, every day, as we build the emerging onchain platform - and with it, the future global financial system. To achieve our mission, we're seeking a very specific candidate. We want someone who is passionate about our mission and who believes in the power of crypto and blockchain technology to update the financial system. We want someone who is eager to leave their mark on the world, who relishes the pressure and privilege of working with high caliber colleagues, and who actively seeks feedback to keep leveling up. We want someone who will run towards, not away from, solving the company's hardest problems. Our ******************************** is intense and isn't for everyone. But if you want to build the future alongside others who excel in their disciplines and expect the same from you, there's no better place to be. While many roles at Coinbase are remote-first, we are not remote-only. In-person participation is required throughout the year. Team and company-wide offsites are held multiple times annually to foster collaboration, connection, and alignment. Attendance is expected and fully supported. The Complaints Quality Control (CQC) team plays a critical role in ensuring our global complaints operations are efficient, compliant, and consistently deliver high-quality outcomes. As an Analyst III on the team, you'll conduct quality control (QC) reviews across Consumer Complaints, Regulatory Complaints, and Litigation Support investigations, while helping refine complaint processes and providing actionable feedback to agents. This role requires strong independence, the ability to manage multiple priorities, and a commitment to continuous improvement through open, collaborative feedback. *What you'll be doing (ie. job duties):* * Perform QC reviews of complaint cases based on the quality rubric, ensuring compliance with established guidelines. * Provide constructive feedback to agents based on QC findings to support performance improvement. Feedback will be documented in written reports, and agents may need to set up meetings to discuss and clarify scores if needed. * Assist in refining and updating the complaints review process, contributing feedback and suggestions for ongoing improvements. * Conduct root cause analysis (RCA) to identify trends and areas for process enhancements. * Collaborate with cross-functional teams to improve the efficiency and effectiveness of complaints handling. * Independently balance and prioritize multiple tasks to ensure timely and accurate completion of QC reviews. * Be receptive to feedback from all levels and foster a collaborative environment that encourages open communication and continuous improvement. * Ensure compliance with global regulatory guidelines, including MiCA and CF8, across all complaint handling. * Contribute to reporting and visualizations that highlight complaint trends and areas for process optimization. * Support the troubleshooting and resolution of escalated and complex complaint cases, ensuring alignment with company standards. *What we look for in you (ie. job requirements):* * Minimum of 3 years of relevant experience in financial services, crypto, investigations, legal, or the tech industry, with a focus on complaints handling, compliance, or regulatory matters. * Ability to work independently, manage multiple priorities, and balance tasks with minimal guidance. * Strong analytical skills with the ability to perform root cause analysis and provide actionable insights. * Comfortable providing feedback to agents and open to receiving feedback from peers and leadership. * Exceptional communication skills to collaborate with cross-functional teams and present findings effectively. * Adaptability to thrive in a fast-paced, high-growth environment and adjust priorities as needed. * Proven attention to detail, with a focus on accuracy and quality in QC reviews and reporting. *Nice to haves:* * Experience in project management, analytics, or vendor management. * Advanced degree in business, finance, or customer experience (CX). * Proficiency with tools such as Google apps, JIRA, and Salesforce Service Cloud. * Experience collaborating with external outsource business partners. Position ID: P74727 \#LI-Remote *Pay Transparency Notice*: Depending on your work location, the target annual *base *salary for this position can range as detailed below. Full time offers from Coinbase also include bonus eligibility + equity eligibility + benefits (including medical, dental, vision and 401(k)). Base salary range shown. Total compensation also includes equity and bonus eligibility and benefits: $38.01-$40.01 USD Please be advised that each candidate may submit a maximum of four applications within any 30-day period. We encourage you to carefully evaluate how your skills and interests align with Coinbase's roles before applying. Commitment to Equal Opportunity Coinbase is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, creed, gender, national origin, age, disability, veteran status, sex, gender expression or identity, sexual orientation or any other basis protected by applicable law. Coinbase will also consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state and local law. For US applicants, you may view the *********************************************** in certain locations, as required by law. Coinbase is also committed to providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact us at accommodations*********************************** *Global Data Privacy Notice for Job Candidates and Applicants* Depending on your location, the General Data Protection Regulation (GDPR) and California Consumer Privacy Act (CCPA) may regulate the way we manage the data of job applicants. Our full notice outlining how data will be processed as part of the application procedure for applicable locations is available ********************************************************** By submitting your application, you are agreeing to our use and processing of your data as required. *AI Disclosure* For select roles, Coinbase is piloting an AI tool based on machine learning technologies to conduct initial screening interviews to qualified applicants. The tool simulates realistic interview scenarios and engages in dynamic conversation. A human recruiter will review your interview responses, provided in the form of a voice recording and/or transcript, to assess them against the qualifications and characteristics outlined in the job description. For select roles, Coinbase is also piloting an AI interview intelligence platform to transcribe and summarize interview notes, allowing our interviewers to fully focus on you as the candidate. *The above pilots are for testing purposes and Coinbase will not use AI to make decisions impacting employment*. To request a reasonable accommodation due to disability, please contact accommodations[at]coinbase.com

Job ID 251330 Posted 16-Jan-2026 Service line PJM Segment Role type Full-time Areas of Interest Building Surveying/Consultancy, Construction, Consulting **About the role** The Facility Condition Assessments (FCA) Team at CBRE | Turner & Townsend Inc. is currently seeking a detail-oriented individual who will ensure that the deliverables are accurate, consistent, and conform to the standards and guidelines for the facility condition assessments, capital planning, and asset management reports established by the Building Consultancy group. Primary duties include identifying content issues, developing and enforcing quality standards, and collaborating with teams to provide various client deliverables in a timely manner. **What you'll do** + Data Assessment: Review facility condition and asset data for content, structure, and quality, and identify anomalies and inconsistencies. Must have fluency of the English language, as it relates to grammar, punctuation, and spelling. Must be able to compare data criteria/fields for content, agreement, and technical accuracy. + Standards Adherence: Collaborate with team members to ensure that the comprehensive quality standards and metrics (e.g., accuracy, completeness, timeliness) are met. Must be able to switch between sets of rules pertaining to each client and project. + Data Cleansing and Resolution: Identify and rectify errors, inconsistencies, and redundancies within facility condition assessment and asset datasets. + Monitoring and Reporting: Evaluate and provide corrective action of data quality, create reports for facility capital planning engagements. + Process Improvement: Recommend changes to existing processes, entry, and deliverable workflow. Must be a team player and not afraid to ask questions. Must be comfortable in a fast-paced, high-volume setting and managing projects and deadlines. **What you'll need** + We will provide reasonable accommodations that may be made to enable individuals with disabilities. To perform this job optimally, an individual must be able to perform each crucial duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. + Associate's degree (AA/AS), College Diploma, or equivalent preferred. Minimum of three years of related experience in addition to education. Consideration will be given to a person with 5 years of related experience, regardless of whether they hold a degree. Experience in the Architecture, Engineering, and Construction field is preferred. + Experience with Microsoft Office Suite products. + Applicants must be currently authorized to work in the United States without the need for visa sponsorship now or in the future. **Additional Skills** + Ability to write in a clear and concise, coherent way using appropriate grammar, spelling, punctuation, and style. Adapt writing style for different audiences, purposes, and formats. + Ability to edit technical documents in a detailed and accurate manner to ensure deliverables are professional and presentable. + Ability to comprehend and interpret instructions, short correspondence, and memos and ask clarifying questions to ensure understanding. Must be detail-oriented and observant + Requires basic knowledge of financial terms and principles. Ability to calculate simple figures such as percentages. + Must have a basic understanding of architectural, mechanical, and electrical equipment and features, and some familiarity with industry standards and language. **Disclaimer:** _Please be advised that effective January 1, 2025, CBRE Project Management and Turner & Townsend will be consolidated into a single global business entity. As a candidate applying for a position, you should be aware that while your initial employment may be with CBRE Project Management, you will subsequently transfer to the newly formed entity that encompasses both organizations._ Turner & Townsend carefully considers multiple factors to determine compensation, including a candidate's education, training, and experience. The minimum salary for this position is $50,000 annually and the maximum salary for this position is $70,000 annually. The compensation that is offered to a successful candidate will depend on the candidate's skills, qualifications, and experience. Successful candidates will also be eligible for a discretionary bonus based on Turner & Townsend's applicable benefit program. This role will provide the following benefits: 401(K), Dental insurance, Health insurance, Life insurance, and Vision insurance. **Equal Employment Opportunity:** CBRE has a long-standing commitment to providing equal employment opportunity to all qualified applicants regardless of race, color, religion, national origin, sex, sexual orientation, gender identity, pregnancy, age, citizenship, marital status, disability, veteran status, political belief, or any other basis protected by applicable law. **Candidate Accommodations:** CBRE values the differences of all current and prospective employees and recognizes how every employee contributes to our company's success. CBRE provides reasonable accommodations in job application procedures for individuals with disabilities. If you require assistance due to a disability in the application or recruitment process, please submit a request via email at recruitingaccommodations@cbre.com or via telephone at *************** (U.S.) and *************** (Canada). CBRE, Inc. is an Equal Opportunity and Affirmative Action Employer (Women/Minorities/Persons with Disabilities/US Veterans)

Austin Industrial delivers premier maintenance, construction, and soft craft services to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. Our team of employee-owners, equipped with innovative technology and optimized procedures, helps owners optimize safety, productivity, profit margins, and cost-efficiency. QC/QA Technician The Quality Control Technician performs all QC and QA testing procedures specified or assigned, assuring compliance to all specifications and maintaining all associated records. The Quality Technician must be able to perform complex calculations, may assist with customer complaints in-house, and may be present at line trials under supervision. Specific Duties and Responsibilities: Perform all QC and QA test procedures specified for each product. Maintain complete and accurate QC records. Prepare and record customer submissions. Address customer complaints under close supervision. Maintain a clean workstation and all laboratory equipment, functioning within required safety guidelines. Perform equipment calibration and testing procedures as assigned. Use main computer system for input and manipulation. Increase knowledge and understanding of material cause and effect. Meet or exceed agreed upon and established goals. Must be able to perform work wearing personnel protective equipment. Including but not limited to the following: rain gear, chemical protective clothing, supplied air and air purifying respirators, safety harness, sand blast hoods, fire resistant coveralls, hard hat, ear plugs and safety glasses. While performing the duties of this job, the employee is regularly required to have full range of mobility in upper and lower body, able to reach overhead, able to work in various positions, including, but not limited to, stooping, standing, bending over, sitting, kneeling, squatting; use hands to handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; work at heights; balance for extended periods of time. Other duties as assigned. Must have CWI Certification Applicants must be legally authorized to work for ANY employer in the United States. Austin Industrial is unable to sponsor or take over sponsorship of an employment visa for this position. Qualifications Required for this Position: Education: no minimum education requirements. Experience: 3-5 years of experience in an industrial setting, preferred. Must pass drug screen, as condition of employment. No Per diem Long Term Position We offer excellent benefits including medical, dental, life and disability insurance, and a matching 401K plan. We are proud to be a 100% Employee-Owned Company (ESOP)! To learn more about our employee-ownership structure, please go to https://www.austin-ind.com/our-company/100-employee-owned. Austin Industrial is an Equal Opportunity Employer. See the “Know Your Rights” poster available in English and Spanish. About Austin Industrial Austin Industrial provides premier self-perform maintenance, construction, and soft craft service to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. To learn more about us, visit https://www.austin-ind.com/what-we-do/industrial. No Third-Party Inquiries Please This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so ( i.e. , payment must be required pursuant to the terms of a written agreement). Any unsolicited resumes or candidate information submitted to this Company or any of its employee-owners becomes the property of the Company. Accessibility Note If you are a job seeker with a disability and require a reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact the People Services Team at (877) 831-1217.

Are you interested in being part of an innovative team that supports Westinghouse's mission to provide clean energy solutions? At Westinghouse, we recognize that our employees are our most valuable asset, and we seek to identify, attract and recruit the most qualified talent while recognizing and encouraging the value of diversity in the global workplace. About the role: As an Instrumentation and Controls intern, you will report to the EFIN Manager and be located at our Columbia location. This is a paid full-time onsite summer position.

Overview Owen Steel Company is currently recruiting a Quality Control Inspector with 3-5 years of experience in a structural steel fabrication environment. Safety is always first, applicants must be able to work safely and professionally. In this role, a successful applicant will have a strong understanding of welding, fabrication, quality control, and NDE weld inspection methods including VT, UT, and MT. Experience in UT and MT is a plus, but not required. Primary Responsibilities Conduct material verification, fit-up inspections, and final inspections. Read and interpret fabrication drawings for fit-up and final fabrication verification and documentation. Interface effectively with customer QC representatives. Complete reports for all testing and inspections performed. Qualifications and Requirements 3-5 years of experience in a structural steel fabrication environment. AWS Certified Welding Inspector Certification Familiarity with FCAW and SAW welding processes. Proficiency in reading fabrication drawings. Understanding of fabrication codes (AWS D1.1 preferred). Ability to communicate and collaborate effectively with team members and customer QC representatives. Ability to work safely and professionally. Schedule and Location The standard schedule is 10-hour days Monday through Thursday and an 8-hour day on Friday. (Additional overtime may be required based off production needs.) Must be in the plant - no remote option. First shift and second shift opportunities are available. Owen Steel is an Equal Opportunity Employer. The Company offers compensation commensurate with experience, and a benefits package (after 90 days) that includes medical, dental, vision, life insurance, short-term disability, long-term disability and a 401(k) Plan.

Austin Industrial delivers premier maintenance, construction, and soft craft services to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. Our team of employee-owners, equipped with innovative technology and optimized procedures, helps owners optimize safety, productivity, profit margins, and cost-efficiency. **QC/QA Technician** The Quality Control Technician performs all QC and QA testing procedures specified or assigned, assuring compliance to all specifications and maintaining all associated records. The Quality Technician must be able to perform complex calculations, may assist with customer complaints in-house, and may be present at line trials under supervision. **Specific Duties and Responsibilities:** + Perform all QC and QA test procedures specified for each product. + Maintain complete and accurate QC records. + Prepare and record customer submissions. + Address customer complaints under close supervision. + Maintain a clean workstation and all laboratory equipment, functioning within required safety guidelines. + Perform equipment calibration and testing procedures as assigned. + Use main computer system for input and manipulation. + Increase knowledge and understanding of material cause and effect. + Meet or exceed agreed upon and established goals. + Must be able to perform work wearing personnel protective equipment. Including but not limited to the following: rain gear, chemical protective clothing, supplied air and air purifying respirators, safety harness, sand blast hoods, fire resistant coveralls, hard hat, ear plugs and safety glasses. + While performing the duties of this job, the employee is regularly required to have full range of mobility in upper and lower body, able to reach overhead, able to work in various positions, including, but not limited to, stooping, standing, bending over, sitting, kneeling, squatting; use hands to handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; work at heights; balance for extended periods of time. + Other duties as assigned. + Must have CWI Certification + Applicants must be legally authorized to work for ANY employer in the United States. Austin Industrial is unable to sponsor or take over sponsorship of an employment visa for this position. **Qualifications Required for this Position:** **Education** : no minimum education requirements. **Experience:** 3-5 years of experience in an industrial setting, preferred. Must pass drug screen, as condition of employment. No Per diem Long Term Position We offer excellent benefits including medical, dental, life and disability insurance, and a matching 401K plan. **We are proud to be a 100% Employee-Owned Company (ESOP)!** To learn more about our employee-ownership structure, please go to ********************************************************* . **Austin Industrial is an Equal Opportunity Employer.** _See_ the "Know Your Rights" poster available in English (****************************************************************************************** and Spanish (******************************************************************************************** . **About Austin Industrial** Austin Industrial provides premier self-perform maintenance, construction, and soft craft service to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. To learn more about us, visit ************************************************ . **No Third-Party Inquiries Please** This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so ( _i.e._ , payment must be required pursuant to the terms of a written agreement). Any unsolicited resumes or candidate information submitted to this Company or any of its employee-owners becomes the property of the Company. **Accessibility Note** If you are a job seeker with a disability and require a reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact the **People Services Team** at ****************.** Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

Quality Management : Quality Control Inspector - Frederick, MD Apply now Contact Your Rohde & Schwarz recruiting team is looking forward to receiving your application. Info City/region Maryland (USA) Entry level Professionals Employment Type Full-time Ref. Number 15180 Share more Rohde & Schwarz is seeking dedicated and detail-oriented Quality Control Inspectors to join our team in support of a product manufacturing program. This role is critical in ensuring that our products meet the highest quality standards and comply with all applicable technical data, industry standards, and customer requirements. Your tasks * Conduct thorough inspections, measurements, testing, and verification of components, parts, and integrated systems. * Ensure compliance with applicable technical data, industry standards, and customer specifications throughout all stages of production. * Perform detailed inspections during incoming material receiving, in-process manufacturing, and final product release. * Maintain accurate and organized quality records to support compliance and traceability. * Troubleshoot and resolve technical issues as they arise, utilizing systematic procedures to identify and rectify faults in products. * Collaborate with production teams to communicate quality issues and implement corrective actions. * Participate in continuous improvement initiatives to enhance quality processes and practices. Exciting insights into Rohde & Schwarz Our colleagues provide insider information about: * Daily adventures and challenges * Our passionate team * The technologies behind the innovative projects and solutions Your browser does not support the video tag Your qualifications * BS or Associate's Degree in Science. Electronics Technology is preferred. * Minimum of 3 years of Quality Control experience in an electronics manufacturing environment or a similar field. * Experience or training in Electrostatic Discharge (ESD) practices is a plus. * Familiarity with ISO 9001 or AS9100 Quality Management Systems is advantageous. * Experience working on aerospace or defense contracts is highly desirable. * Knowledge of (VoIP) technology preferred. * Knowledge of Lean practices and experience with ERP/MRP systems (SAP experience is a plus). * Excellent troubleshooting skills with the ability to develop and implement systematic procedures for fault identification and resolution. * Proficient in using common hand tools and testing equipment (e.g., multimeters, oscilloscopes, signal generators). * Strong ability to read and interpret technical data, drawings, and specifications. * To be considered, candidates must reside int he US and have US citizenship. Interested? We are looking forward to receiving your application! The total compensation for this position is $60K-$90K. Total compensation includes base salary, variable pay (when applicable) plus benefits. The range is determined by the position, geographic location and level. Individual pay within the range is determined by several factors including location, education or training, relevant work history, sales incentive structure and job-related skills. Rohde & Schwarz is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, disability, protected Veteran status, age or any other characteristic protected by law. Apply now Rohde & Schwarz is a global technology company with approximately 14,000 employees and three divisions: Test & Measurement, Technology Systems and Networks & Cybersecurity. For 90 years, the company has been developing cutting-edge technology, pushing the boundaries of what is technically possible and enabling customers from various sectors such as business, government and public authorities to maintain their technological sovereignty. Our offer * Flexible working hour models * Training & continuing education * Privately owned company * Promoting innovation * Long-term & attractive work environment Show more You might find this also interesting Our culture Discover how we live development, training, diversity and much more! Our benefits With us, you can expect more than just a job - discover the benefits we offer! Our application process Curious about our application process? Find out what awaits you! Your Onboarding Journey Curious about onboarding at Rohde & Schwarz? Take a look here!

Austin Industrial delivers premier maintenance, construction, and soft craft services to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. Our team of employee-owners, equipped with innovative technology and optimized procedures, helps owners optimize safety, productivity, profit margins, and cost-efficiency. QC/QA Technician The Quality Control Technician performs all QC and QA testing procedures specified or assigned, assuring compliance to all specifications and maintaining all associated records. The Quality Technician must be able to perform complex calculations, may assist with customer complaints in-house, and may be present at line trials under supervision. Specific Duties and Responsibilities: * Perform all QC and QA test procedures specified for each product. * Maintain complete and accurate QC records. * Prepare and record customer submissions. * Address customer complaints under close supervision. * Maintain a clean workstation and all laboratory equipment, functioning within required safety guidelines. * Perform equipment calibration and testing procedures as assigned. * Use main computer system for input and manipulation. * Increase knowledge and understanding of material cause and effect. * Meet or exceed agreed upon and established goals. * Must be able to perform work wearing personnel protective equipment. Including but not limited to the following: rain gear, chemical protective clothing, supplied air and air purifying respirators, safety harness, sand blast hoods, fire resistant coveralls, hard hat, ear plugs and safety glasses. * While performing the duties of this job, the employee is regularly required to have full range of mobility in upper and lower body, able to reach overhead, able to work in various positions, including, but not limited to, stooping, standing, bending over, sitting, kneeling, squatting; use hands to handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; work at heights; balance for extended periods of time. * Other duties as assigned. * Must have CWI Certification * Applicants must be legally authorized to work for ANY employer in the United States. Austin Industrial is unable to sponsor or take over sponsorship of an employment visa for this position. Qualifications Required for this Position: Education: no minimum education requirements. Experience: 3-5 years of experience in an industrial setting, preferred. Must pass drug screen, as condition of employment. No Per diem Long Term Position We offer excellent benefits including medical, dental, life and disability insurance, and a matching 401K plan. We are proud to be a 100% Employee-Owned Company (ESOP)! To learn more about our employee-ownership structure, please go to ********************************************************** Austin Industrial is an Equal Opportunity Employer. See the "Know Your Rights" poster available in English and Spanish. About Austin Industrial Austin Industrial provides premier self-perform maintenance, construction, and soft craft service to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. To learn more about us, visit ************************************************* No Third-Party Inquiries Please This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so (i.e., payment must be required pursuant to the terms of a written agreement). Any unsolicited resumes or candidate information submitted to this Company or any of its employee-owners becomes the property of the Company. Accessibility Note If you are a job seeker with a disability and require a reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact the People Services Team at **************.

The Analytical Services Chemist I role is for an entry level laboratory professional with responsibility for performing analytical testing related to raw materials, compounding support activities, and in-process and finished product testing in the Analytical Services Laboratory. Other responsibilities include sampling, testing, and releasing of utilities. Responsibilities: Performing chemical raw material (sampling, testing and release), in-process (including product formulation activities), and final product including stability and complaint sample testing. Responsible for performing tests associated with method validations and transfers as assigned, including cleaning and equipment validations. Responsible for data and/or document review when requested. Notify Laboratory Manager immediately of out of specification results and assist in the investigations of OOS and deviations as requested by the Laboratory Management. Assist in special projects and regulatory audits as requested by Laboratory Management. Assist in collaboration of laboratory SOPs when requested. Responsible for ensuring new logbooks are acquired and coordinating documents ready for off-site storage to include documents located in the file cabinets. Responsible for ensuring inventory is performed and assisting with ordering when requested. Responsible for ensuring that routine maintenance of instrumentation is performed as stated in the instrument manual and contacting the manufacturer for assistance when needed. Responsible for the general maintenance of the Chemistry Laboratory including good housekeeping and a safe working environment. Follow Standard Operating Procedures, documentation, safety, health, and cGMP Guidelines. Qualifications BS degree in Chemistry or related field Previous experience with standard laboratory techniques, wet chemistry tests, titration, spectroscopy, HPLC, GC, and modern Data Acquisition Systems preferred Proficient with current word processing, spreadsheets, and database software Must be detail focused, have a strong work ethic, and the ability to participate in and contribute to a team-oriented work environment by developing positive working relationships within the laboratory and between other departments

Job Responsibilities Works under the supervision of the Lead Cook in a small to medium-sized food service unit; and assists with inspections, staff training, oversee staff job duties. Also helps as a backup in the preparation and cooking/baking of food products. As the Quality Control/Attendant Supervisor, you need to become familiar with headcount/cashier procedures, meal adjustment, and appearance of the serving line, posting meal requirements, and help with shift coverage. Minimum and Additional Requirements A high school diploma with 3 years of supervisor experience and or cooking experience in quantity and quality cooking or baking. Servsafe Certified. Ability to work in cohesion with Lead Cook with little to no supervision. Ability to read and prepare meals utilizing recipe cards and production sheets. Additional Comments Knowledge of the procurement, storage, preparation, distribution and serving of food products. Knowledge of dietetic principles involved in planning and reviewing menus for nutritional adequacy, dietary balance and attractiveness of prepared food products. Knowledge of principles and procedures of food service management. Knowledge of the methods, materials and appliances used in a dining facility. Knowledge of sanitary and safety procedures pertaining to dining operations and/or general food preparation and service. Ability to maintain food service records and prepare written reports. A resume will not be accepted in lieu of an online South Carolina State Employment Application. Only those applicants chosen for interview will be notified of job filled status. Note: Applicants indicating college credit, degree(s) or specialized training on the application shall provide an official copy of transcripts upon notification of selection for hire. This serves as verification of credentials listed on the application.

Job Posting Start Date 01-20-2026 Job Posting End Date 01-30-2026 Flex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world. A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary. Job Summary Summary: The "Quality Control Inspector" will be based in ……., reporting to …… Inspects electronic systems, assemblies, subassemblies, components and parts for conformance to specifications. Responsibilities: * Performs visual inspection of electronic card and sub-assemblies, and systems or units to ensure that all product meets the established specifications for reliability and workmanship. * Utilizes gages, templates, microscopes and other manufacturing aids to ensure that all product meets the established specifications for reliability and workmanship. * Ensures that all required process operations have been performed on the product that is being inspected. * Enters all quality data into the appropriate electronic or manual systems. * Notifies the appropriate personnel if unusual product defects are identified or if process falls below acceptable levels. * Provides timely feedback to manufacturing if non-conforming product is identified. * Accurately completes all administrative activities associated with quality inspection. * Performs process audits and assists manufacturing with the interpretation of the quality and workmanship standards. * Assists with the disposition of all non-conforming materials/product. Qualifications: * Completion of a high school degree or equivalent is preferred. * Successful completion of company provided training may be required. * Typically requires 6-12 months of related experience. What you'll receive for the great work you provide: * Full range of medical, dental, and vision plans * Life Insurance * Short-term and Long-term Disability * Matching 401(k) Contributions * Vacation and Paid Sick Time * Tuition Reimbursement Job Category Quality Is Sponsorship Available? No Flex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

Eurofins Scientific is an international life sciences company, providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins laboratories work with the biggest companies in the world to ensure the products they supply are safe, their ingredients are authentic, and labelling is accurate. Eurofins is dedicated to delivering testing services that contribute to the health and safety of society and the planet, and to its corporate responsibility to protect the environment and ensure diversity, equity, and inclusion across the entire network of Eurofins companies. Job Description The Analyst I prepares and analyzes environmental samples using standard analytical techniques according to scientific and EPA methodology in compliance with Eurofins Quality Assurance programs and SOP's. Analyst I responsibilities include, but are not limited to, the following: Demonstrates and promotes the company vision Regular attendance and punctuality Applies GMP/GLP in all areas of responsibility, as appropriate Performs routine lab tasks that provide experience and familiarization with methods, practices, and programs. These include: Preparation of samples using standard techniques Performing chemical analysis using standard techniques Calculating data Recording and reporting data and any unusual test occurrences to the supervisor Performing routine instrument maintenance Responsible for performing job functions in compliance with Eurofins' EHS and QA standards Responsible for general housekeeping in his/her work area Ability to become trained and competent on complex instrumentation including but not limited to gas chromatography, gas chromatography/mass spectrometry, atomic absorption, ICP, and instrument specific data systems. Works under close supervision using routine and standard methods Aliquots and weighs samples Washes glassware Conducts all activities in a safe and efficient manner Performs other duties as assigned The ideal candidate would possess: Ability to use calculator/mathematical formulas and concepts Ability to complete work within time and quality constraints Can work independently following written or verbal instructions Cooperate and coordinate both orally and in writing Able to follow and learn appropriate protocols in one or more of the following disciplines: Organic preparation Metals preparation and analysis Gas Chromatography Gas Chromatography/Mass Spectrometry Radio Chemistry Wet Chemistry High Resolution preparation and analysis Low Resolution preparation and analysis Qualifications Basic Minimum Qualifications: BS or BA in chemistry or related field; 3 years laboratory experience may substitute for degree. Laboratory experience is a plus Previous production-oriented work helpful (awareness and ability to meet deadlines) Additional Information Requirements: Authorization to work in the United States indefinitely without restriction or sponsorship Professional working proficiency in English is a requirement, including the ability to read, write and speak in English Position is full-time Monday - Friday 1st shift. Candidates currently living within a commutable distance of Irmo, SC are encouraged to apply. Pay rate: $18 - 20/hr Eurofins Environment Testing (USA) provides a compensation range for informational purposes, the actual base salary may vary based upon, but not limited to, relevant experience and skill set, base salary of internal peers, business sector, and geographic location. As a Eurofins employee, you will become part of a company that has received national recognition as a great place to work. we offer excellent benefits including comprehensive medical coverage, life and disability insurance, 401(k) with company match, paid holidays, paid time off, and dental and vision options. *The benefits package offered will vary based on the employee's full-time or part-time regular status. To learn more about Eurofins, please explore our website ******************* We support your development! Do you feel you don't match 100% of the requirements? Don't hesitate to apply anyway! Eurofins companies are committed to supporting your career development. We embrace diversity! Eurofins network of companies believe in strength and innovation through diversity, being an Equal Opportunity Employer. We prohibit discrimination against employees or applications based on gender identity and/or expression, race, nationality, age, religion, sexual orientation, disability, and everything else that makes employees of Eurofins companies unique. Sustainability matters to us! We are well on our way to achieving our objective of carbon neutrality by 2025, through a combination of emission reduction and compensation initiatives. We encourage our laboratory leaders to make sustainable changes at their local level, and in addition to their initiatives we also count on our dedicated carbon reduction team to help us to achieve this goal! Find out more in our career page: ***************************** Company description: Eurofins Scientific is an international life sciences company, providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins laboratories work with the biggest companies in the world to ensure the products they supply are safe, their ingredients are authentic and labelling is accurate. The Eurofins network of companies is the global leader in food, environment, pharmaceutical and cosmetic product testing and in discovery pharmacology, forensics, advanced material sciences and Eurofins Scientific 2/2 March 2023 agroscience contract research services. It is one of the market leaders in certain testing and laboratory services for genomics, discovery pharmacology, forensics, advanced material sciences and in the support of clinical studies, as well as having an emerging global presence in Contract Development and Manufacturing Organisations. It also has a rapidly developing presence in highly specialised and molecular clinical diagnostic testing and in-vitro diagnostic products. In over 35 years, Eurofins has grown from one laboratory in Nantes, France to 61,000 staff across a decentralised and entrepreneurial network of ca. 900 laboratories in 61 countries. Eurofins companies offer a portfolio of over 200,000 analytical methods to evaluate the safety, identity, composition, authenticity, origin, traceability and purity of biological substances and products. In 2022, Eurofins generated total revenues of EUR 6.7 billion, and has been among the best performing stocks in Europe over the past 20 years. Eurofins USA Environment Testing is a Disabled and Veteran Equal Employment Opportunity employer.

The Fabrication job family ensures an environment of continuous improvement exists in the organizations production processes, operating procedures and workflows to achieve internal and external customer satisfaction. Supports manufacturing through use of tools and techniques to ensure product quality and elimination of defects, on time shipment cost reduction. Physical Requirements Stand or Sit(Stationary position), Walk(Move, Traverse), Use hand/fingers to handle or feel (Operate, Activate, Use, Prepare, Inspect, Place, Detect, Position), Climb (stairs/ladders) or balance (Ascend/Descend, Work atop, Traverse), Stoop, kneel, crouch, or Crawl(Position self(to), Move), Talk/hear(Communicate, Detect, Converse with, Discern, Convey, Express oneself, Exchange information), See (Detect, Determine, Perceive, Identify, Recognize, Judge, Observe, Inspect, Estimate, Assess), Pushing or Pulling, Reaching, Repetitive Motion Function in the Job Medium/Heavy work - Exerting up to 50 pounds of force occasionally, and/or up to 50 pounds of force frequently, and/or up to 20 pounds of force constantly to move objects. Job Function * Interprets drawings and confers with management to determine quality and reliability standards * Inspects parts at specified stages in production for dimensional accuracy * Records inspection data * Assist with gage cleaning and calibration * Recommends modifications of existing quality and production standards to achieve optimum capability * Works with QC team leader to resolve deficiencies in quality process * Must present information and respond to questions from customers and general public. * Read and analyze professional journals, technical and governmental regulations. * Write reports and procedure manuals * Maintain clean orderly work area * Perform other duties as assigned. Required Skills Must be able to understand potential problems. Must be able to work from written or verbal instructions 5 years in Quality related field is preferred MANUAL DEXTERITY: Normal range of dexterity to operate computer workstations and manually manipulate parts and tools. TALKING: Especially where one must convey detailed or important instructions or ideas accurately, loudly, or quickly. AVERAGE HEARING: Able to hear average or normal conversations and receive ordinary information. AVERAGE VISUAL ABILITIES: Average, ordinary visual acuity necessary to prepare or inspect documents or products or operate machinery. PHYSICAL STRENGTH: Must be able to lift 25 lbs. to 50 lbs. on a frequent basis

Who we are: Based in Lexington,SC, we are Sorinex Exercise Equipment. Leaders and innovators in the industry. We take pride in manufacturing some of the best exercise equipment there is to offer. Whether it's a personal home gym, athletic weight room or military contract, we provide top notch service to all. With 40+ years of experience, we are continuing to grow on a large scale. Visit Sorinex.com to see our catalog. If you're looking for a place to grow and excel, apply now! Who we are looking for: We are looking for a detail-oriented, conscientious individual to work in our Quality Control Department. This individual will be working Monday-Friday; 8am-5pm with a 1-hour lunch break. The ideal candidate will oversee quality control processes and ensure that products meet company standards. This position requires strong analytical skills and a keen eye for detail. As a member of Quality Control you will be responsible for tasks such as: Uphold stringent quality standards by thoroughly inspecting, testing, and measuring materials. Approve conforming parts and reject non-conforming items, ensuring only the highest quality products move forward. Promptly report any inspection failures or quality issues to the appropriate personnel for immediate resolution. Always strive for excellence, continually aiming to uphold and exceed quality standards. Maintain a deep understanding of product specifications and quality requirements. Efficiently stage completed jobs and assist with loading trucks to facilitate smooth operations. Perform all other duties as assigned. Physical Demands: Lift, carry, push and or pull 1 - 50 lbs. frequently. Squat/kneel, bend/stoop, crawl, twist/turn, grasp, and reach overhead and outward frequently. Sit, stand, and walk for 1 - 10 hours per day. Work in a fast-paced, industrial environment wearing hearing protection, eye protection, steel-toed shoes, and other appropriate protective clothing. Required Experience: Manufacturing: 2 years Quality Control: 2 years Tape Measuring: 2 years Schedule: 40 hours per week, Monday-Friday, 8am-5pm with 1 hour lunch break Pay: From $18.00 per hour Work Location: In-person, Lexington, SC 29073 Benefits: 401(k) 401(k) matching Dental insurance Health insurance Life insurance Paid time off Vision insurance

QC Compound Lab Associate IJob Description The QC Compound Laboratory Technician role is responsible for sample management, quality inspection and manufacturing support. This position generally works alongside chemists and other technicians, organizing the lab workspace, maintaining cleanliness of equipment, creating chemical solutions, and performing chemical experiments. Works with a team that is dedicated to the formulation, processing and evaluation of additives for use in rubber compounds for tire and has full access to state of the art, industry standard capabilities, located in a highly desirable working environment. Will also be responsible for supporting fundamental programs aimed at providing a sustainable competitive advantage in tire performance and/or cost Essential Duties & Functions Apply training to regularly isolate and prepare samples for chemical analysis Apply knowledge of various chemical analysis techniques to effectively use and calibrate instruments Manage time and resources to effectively meet expected completion dates for requests Document observations and conclusions in clear and concise notes and formal reports Participate in project updates each week Lab scale weighing, mixing and compounding of polymers with various additives for rubber formulations Curing and physical testing of compounds Documentation and reporting of experimental data Assistance with the development of new testing procedures and predictive capabilities for the assessment of tire tread performance properties, whose needs are constantly evolving Training of team members in newly developed test procedures Promote a safe work environment through work practices Under minimal supervision, employee will perform, coordinate, analyze and monitor quality control and product assurance tests and test results to ensure products meet or exceed quality and reliability, specifications and standards Employee will also generate certificate of analysis and approves all raw materials Enforce and follow company policies as required Resolves less complex problems immediately, while more complex problems are typically assigned to next level Perform other duties of equal or less complexity as assigned or directed by management Engage and retain high-performance standards and elevate level of responsibility and performance Skills/Qualifications High-level laboratory skills preferred Safe, careful work habits with attention to detail Must be able to prioritize and multi task Must be able to use Word, Excel, and Outlook Good communication, analytical and troubleshooting skills Good verbal and writing skills Strong interpersonal skills and the ability to work within a team environment recommended Education and/or Experience High School diploma or GED. Prefer Associates degree in Chemistry or laboratory science; or an equivalent combination of education and experience Minimum 1 year work experience in chemical analysis or relevant field preferred 2 years of manufacturing experience preferred Knowledge of laboratory analytical testing procedures and specific lab equipment required to perform quality testing Knowledge of common lab procedures Ability to learn quickly and to apply knowledge on practical problem solving Experience with precise measurements preferred Experience with various types of chromatography, spectroscopy and wet chemical analysis techniques preferred Experience in and/or willing to learn and apply a variety of sample isolation and preparation procedures

QC Compound Lab Associate IJob Description The QC Compound Laboratory Technician role is responsible for sample management, quality inspection and manufacturing support. This position generally works alongside chemists and other technicians, organizing the lab workspace, maintaining cleanliness of equipment, creating chemical solutions, and performing chemical experiments. Works with a team that is dedicated to the formulation, processing and evaluation of additives for use in rubber compounds for tire and has full access to state of the art, industry standard capabilities, located in a highly desirable working environment. Will also be responsible for supporting fundamental programs aimed at providing a sustainable competitive advantage in tire performance and/or cost Essential Duties & Functions Apply training to regularly isolate and prepare samples for chemical analysis Apply knowledge of various chemical analysis techniques to effectively use and calibrate instruments Manage time and resources to effectively meet expected completion dates for requests Document observations and conclusions in clear and concise notes and formal reports Participate in project updates each week Lab scale weighing, mixing and compounding of polymers with various additives for rubber formulations Curing and physical testing of compounds Documentation and reporting of experimental data Assistance with the development of new testing procedures and predictive capabilities for the assessment of tire tread performance properties, whose needs are constantly evolving Training of team members in newly developed test procedures Promote a safe work environment through work practices Under minimal supervision, employee will perform, coordinate, analyze and monitor quality control and product assurance tests and test results to ensure products meet or exceed quality and reliability, specifications and standards Employee will also generate certificate of analysis and approves all raw materials Enforce and follow company policies as required Resolves less complex problems immediately, while more complex problems are typically assigned to next level Perform other duties of equal or less complexity as assigned or directed by management Engage and retain high-performance standards and elevate level of responsibility and performance Skills/Qualifications High-level laboratory skills preferred Safe, careful work habits with attention to detail Must be able to prioritize and multi task Must be able to use Word, Excel, and Outlook Good communication, analytical and troubleshooting skills Good verbal and writing skills Strong interpersonal skills and the ability to work within a team environment recommended Education and/or Experience High School diploma or GED. Prefer Associates degree in Chemistry or laboratory science; or an equivalent combination of education and experience Minimum 1 year work experience in chemical analysis or relevant field preferred 2 years of manufacturing experience preferred Knowledge of laboratory analytical testing procedures and specific lab equipment required to perform quality testing Knowledge of common lab procedures Ability to learn quickly and to apply knowledge on practical problem solving Experience with precise measurements preferred Experience with various types of chromatography, spectroscopy and wet chemical analysis techniques preferred Experience in and/or willing to learn and apply a variety of sample isolation and preparation procedures

**Discover a more connected career** At Lambert's Cable, as a Quality Control Field Technician, you'll ensure that construction or installation work meets specified standards by performing inspections, conducting tests, and monitoring compliance throughout projects. You'll address issues, document findings, and collaborate with teams to implement improvements and maintain high-quality outcomes **Connecting you to great benefits** + Weekly Paychecks + Paid Time Off, Parental Leave, and Holidays + Insurance (including medical, prescription drug, dental, vision, disability, life insurance) + 401(k) w/ Company Match + Stock Purchase Plan + Education Reimbursement + Legal Insurance + Discounts on gym memberships, pet insurance, and much more! **What you'll do** + Conduct quality inspections during the installation process to ensure work meets plans and specifications + Perform final inspections as requested by customers to ensure compliance with construction standards + Identify issues and report them to relevant team members for resolution + Record and follow up on non-compliance issues until they are resolved + Ensure all required testing is completed as specified and document the results + Follow installation milestones and support project activities as directed by management + Work overtime, travel, and handle on-call or after-hours responsibilities as needed, and perform duties in all weather conditions + Other duties as assigned **What you'll need** + To be 18 years of age or older + Authorization to work in the United States for this company + Valid State driver's license (cannot be Provisional), including an acceptable driving record + One year of relevant work experience Additional qualifications + Quality control experience preferred + Associates Degree in an industry related field or equivalent work experience + Knowledge and understanding of the telecommunication construction industry standard practices + Knowledge of Customer Installation Standards and Documentation **Physical abilities & exposures** + **Routinely** : work alone in remote locations, operate vehicle, squeeze, bend, stoop, stand, walking, climb stairs, use keyboard and mouse + **Occasionally** : work at heights, use ladder, life greater than 55 pounds **Why grow your career with us** Your career here is more than just a job - it's your pathway to opportunity. Our hands-on training, supportive environment, and responsive leadership connect you to work with purpose. Our commitment to you extends beyond professional development to a safety-first culture that ensures you can do what you do best, with peace of mind. **Building stronger solutions together** Our company is an equal-opportunity employer - we are committed to providing a work environment where everyone can thrive, grow, and feel connected. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Job Posting Start Date 01-21-2026 Job Posting End Date 03-21-2026Flex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world.A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary.Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a Document Control Analyst located at our site in Columbia South Carolina Reporting to the Manufacturing Engineering Manager, the Document Control Analyst responsible for controlling and maintaining the engineering change and documentation tracking process with emphasis on Bills of Material (BOM's), parts masters, specifications, drawings and documentation to ensure appropriate changes are documented. What a typical day looks like: Creates, implements and finalizes engineering change orders (ECO's) and makes system changes. Performs file maintenance of BOM's, parts drawings, ECO's, process alerts and other customer documents. Coordinates ECO status with customers and implements cost changes and effective dates. Ensures projects are following document control policies and procedures. Ensures data accuracy and completeness of documentation including logs, reports and distribution. Manages and tracks product configuration and manufacturing/customer requirements. Responsible for interface between program manager, engineering, manufacturing and materials to ensure appropriate changes are documented. Collects and reports process performance metrics. Track work completed by customer program for reporting purposes. The experience we're looking to add to our team: Bachelor's degree in engineering or related field 2+ years of experience in high-regulated, high-volume manufacturing environment. Knowledge of Agile PDM systems and processes Knowledge of Baan ERP systems and processes Advanced people and/or process skills as well as customer (external and internal) relationship skills. Excellent Microsoft Office and Excel knowledge PowerPoint Ability to read and comprehend simple instruction, short correspondence and memos. Effectively present information in a one-on-one and small group situations to customers, client and employees Apply common sense understanding to carry out detailed written or oral instructions. Ability to deal with problems and standardized situations LI# YV1 What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Job CategoryProduction EngineeringRelocation: Not eligible Is Sponsorship Available? NoFlex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

The Analytical Services Chemist II role is for a developing laboratory professional with responsible for performing analytical testing related to raw materials, compounding support activities, and in-process and finished product testing in the Analytical Services Laboratory. Other responsibilities include sampling, testing, and releasing of utilities. Responsibilities: Performing chemical raw material (sampling, testing and release), in-process (including product formulation support activities), and finished product (including stability and complaint) sample testing. Responsible for performing tests associated with method validations and transfers as assigned, including cleaning and equipment validations. Responsible for data and/or document review when assigned. Notify Laboratory Management immediately of out of specification results and assist in the investigations of OOS and deviations as assigned by Laboratory Management. Assist in special projects and regulatory audits as assigned by Laboratory Management. Assist in collaboration of laboratory SOPs when assigned. Responsible for ensuring new logbooks are acquired and coordinating documents ready for off-site storage. Responsible for assisting with employee training when assigned. Responsible for ensuring inventory is performed and assisting with ordering when assigned. Responsible for ensuring that routine maintenance of instrumentation is performed as stated in the instrument manual and contacting the manufacturer for assistance when needed. Responsible for the general maintenance of the Analytical Services Laboratory including good housekeeping and a safe working environment. Follow Standard Operating Procedures, documentation, safety, health, and cGMP Guidelines. Qualifications BS degree in Chemistry or related field with a minimum of 2 years of experience in a pharmaceutical laboratory environment, or a MS degree in chemistry or related field Competency with standard laboratory techniques, wet chemistry tests, titration, spectroscopy, HPLC, GC, and modern Data Acquisition Systems required Strong documentation skills and proficiency with current word processing, spreadsheets, and database software required Must be detail focused, have a strong work ethic, and the ability to participate in and contribute to a team-oriented work environment by developing positive working relationships within the laboratory and between other departments