Quality control analyst jobs in Manteca, CA - 91 jobs

AOSense, Inc. is the leading developer and manufacturer of innovative quantum technologies employing atom optics. Our products use frequency-stabilized lasers and atoms in a vacuum cell to measure accelerations, rotations, magnetic fields, and time with unparalleled accuracy and stability. Our staff includes physicists, engineers, and technicians with expertise covering a wide array of disciplines. Our teams are dynamic and fast paced since our hardware is cutting edge. POSITION SUMMARY: We are seeking an R&D technician who specializes in precision assembly and testing. As a hands-on R&D Technician at AOSense, you will work with physicists and engineers to build and test high-performance, fieldable accelerometers, gyroscopes, gravimeters, atomic clocks, frequency standards, and magnetometers, as well as component technologies that we sell commercially to the R&D community. RESPONSIBILITIES: Collaborate with physicists and engineers to assemble and test complex quantum sensor and atomic clock hardware Procure and track inventories of mechanical, optical, vacuum, and electrical components Coordinate component and subsystem fabrication, assembly, and test Assemble precision mechanical systems Align lasers through optical systems Procure and maintain laboratory equipment and supplies Collaborate with engineers to define and implement test plans Bake out and leak test vacuum systems Document and report results of validation testing Requirements Demonstrated success in precision mechanical assembly of prototypes and products Enthusiasm for developing expertise in new fabrication disciplines Proven organizational skills and attention to detail Hands-on experience with test equipment Excellent troubleshooting skills Applicants should thrive in a dynamic environment U.S. Government contracts require applicants to be U.S. citizens or permanent residents DESIRED EXPERIENCE: Expertise aligning and securing micro-optical components Hands-on experience with vacuum system assembly and testing Adept in glovebox assembly work Sensitivity to cleanliness requirements of vacuum and optical assemblies Skilled in mechanical prototyping, including basic machining and finishing operations Practical experience with advanced bonding methods, including soldering, brazing, and adhesives Proficiency with SolidWorks mechanical design software Familiarity with electronics prototyping, including reading schematics, PCB fabrication, assembly, soldering, and rework Experience testing low-noise analog, mixed-signal, and rf electronics Basic knowledge of data acquisition and analysis software such as LabVIEW, MATLAB, and Python EDUCATION AND EXPERIENCE: Associate degree in a relevant technical field or equivalent professional experience, with experience in an R&D environment Benefits Salary depends on qualifications and experience Medical and dental Retirement Stock plan AOSense is an equal opportunity employer (EOE) and considers qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran or disability status, or any other federal, state or local protected class. AOSense is committed to providing equal employment opportunity to qualified individuals with disabilities. If you are disabled and require special assistance or a reasonable accommodation while seeking employment with AOSense, then please contact us via email at ******************* or call ************** x210

Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded, and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. We're Coming Back Together To Be Together 100% In Office & Onsite At Vulcan Materials, we believe that the heart of our success lies in the strength of our engagement, our connection, and our commitment to developing our people. We are excited to restore the collaborative in-person environment that fuels our innovation and growth. This move is not just about being physically present; it's about reigniting the spirit that comes from face-to-face interactions, fostering a collaborative, inclusive culture where every voice is heard and everyone thrives. What You'll Do: Ensure Quality Control. Conduct routine testing of in-process materials, raw materials, environmental samples, and finished materials to ensure quality control of products at the point of production, shipping, and arrival upon the job site. Adhere to testing methods, including American Society for Testing and Materials (ASTM), American Association of State Highway and Transportation Officials (AASHTO) and Department of Transportation (DOT). Document and Report Information. Complete all required reports in a timely and accurate manner, interpreting, documenting, and storing the results. Communicate test results in a timely manner to the supervisor and properly document in a database. Maintain Lab Standards. Ensure housekeeping standards are maintained in and around the lab. Troubleshoot problems and review basic product specifications. Inspect, calibrate, and maintain testing equipment periodically. Monitor Stockpile. Inspect stockpiles, materials sources, and truckloads at plant sites. Monitor the daily construction of the stockpile to ensure that segregation and contamination is kept to a minimum or eliminated. Notify management immediately if contamination is identified. Inspect Equipment and Structures. Conduct routine inspections of the plant equipment in order to ensure safe, reliable, and compliant operations to maximize production and minimize interruptions. Additional Responsibilities. Other duties as assigned. Skills You'll Need: Experience. Prior training or experience in the materials testing field is preferred. Knowledge of general principles and practices of aggregate production is preferred. Safety Knowledge. Must display knowledge and awareness of construction and mining site hazards. Math Skills. Must possess good math skills and demonstrate the ability to perform simple to moderately complex arithmetic calculations. Technology Skills. Must have the ability to use computerized equipment and technology. Must be proficient in Microsoft Office Suite, Google, Oracle Business Environment, and other software packages relevant to the position. What You'll Like About Us: Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness and communication. Safe. Industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets up apart is the work we do impacts daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits. Medical, Dental, Vision programs, plus much more. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see our development programs and helping our employees meet their goals as a key part of our business. Salary Range: the base salary range for this role is between $30.00 to $36.00 per hour. This range is not inclusive of our discretionary bonus or equity package. When determining a candidate's compensation, we consider a number of factors, including skillset, experience, job scope, and current market data. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. NOTICE TO TEMPORARY STAFFING AGENCIES, PLACEMENT SERVICES AND PROFESSIONAL RECRUITERS Vulcan Materials Company has an internal recruiting department. Please review our policy as it relates to the use of temporary staffing agencies, placement services and professional recruiters.

Mindlance is a national recruiting company which partners with many of the leading employers in the Life Sciences, IT, and Financial Services sectors, feel free to check us out at ************************* Job Description Skills: • 3-5 years of industry expereince • Experience with qPCR, UV-vis absorbance, gel electrophoresis, pH, Osmolalilty • GMP experience is highly prefered • Very smart with a great attitude and a willingness to work hard with the team • Demonstrates strong interpersonal and communication skills (both written and oral), a strong customer focus, and an ability to interact with various departments and levels. • Demonstrates ability to work independently and as part of a team, to meet departmental/facility goals; is also able to work across functions to achieve common goals. • Demonstrates strong attention to detail, and an ability to focus on details of execution. • Demonstrates good facilitation, organizational and problem solving skills, as well as demonstrated • Education: Bachelors degree in Biology or Life Sciences required Duties: Analytical testing: • Under supervision, performs testing, conducts lab investigations, problem-solves, and reports aberrant results to management. • Performs biochemistry, qPCR, compendial testing, drug product device testing, CE, UV-vis absorbance, gel electrophoresis, pH, Osmolalilty • Ensures testing and release time lines are met. Follows well-defined and established procedures and best practices. Reviews QC test results Documentation • Generates, reviews and/or maintains records or documents in a detailed and consistent manner. Prepares sample reconciliation reports and other reports as needed. Assists with QC's data management, including data review and control charting. • Process improvement and compliance: • Coordinates and manages continuous improvement projects Revises standard operating procedures, training manuals, etc which are submitted to management for review and final approval. Maintains specific QC files and database records for process and/or quality improvement efforts. Manages and maintains deviation and change control records. Qualifications 3-5 years of industry expereince • Education: Bachelors degree in Biology or Life Sciences required • Experience with qPCR, UV-vis absorbance, gel electrophoresis, pH, Osmolalilty • GMP experience is highly prefered • Very smart with a great attitude and a willingness to work hard with the team • Demonstrates strong interpersonal and communication skills (both written and oral), a strong customer focus, and an ability to interact with various departments and levels. • Demonstrates ability to work independently and as part of a team, to meet departmental/facility goals; is also able to work across functions to achieve common goals. • Demonstrates strong attention to detail, and an ability to focus on details of execution. • Demonstrates good facilitation, organizational and problem solving skills, as well as demonstrated Additional Information

Information/Definition The City of Turlock is seeking applicants for the Laboratory Analyst I/II position. Under general direction this position performs chemical, biological and bacteriological analysis of water/wastewater, related solids and liquids in support of efficient operation of water and wastewater treatment operations. This position works closely with Water/Wastewater/Distribution Operations and Environmental Compliance staff. This classification is assigned to the Turlock City Employees Association bargaining unit for labor relations purposes and is subject to overtime assignments. Depending on qualifications candidates may be considered for either the Laboratory Analyst I($4,937 - $6,001) or Laboratory Analyst II($5,575 - $6,947). An eligibility list will be established from this recruitment that will be valid for six (6) months. All employees are required to serve a twelve (12)probationary period. Distinguishing Characteristics This is an entry/journey level class. Individuals working in the Lab Analyst I classification work under close supervision to perform routine laboratory testing procedures. This classification requires basic knowledge of water and wastewater analysis and procedures. Individuals working the Lab Analyst II classification are expected to have all the characteristics of a Lab Analyst I and journey level knowledge and experience of more advanced water and wastewater analysis and procedures. Supervision Exercised and Received General supervision is provided by the Water Quality Control Laboratory Supervisor or Laboratory Analyst Supervisor; incumbents may receive technical direction from the Laboratory Analyst, Sr. Essential Functions - Include But Are Not Limited To The Following: Laboratory Analyst I * Learn to performs a variety of basic and advanced chemical, biological, and bacteriological tests of water, wastewater, and solids necessary to ensure that plant processes meet wastewater treatment and NPDES discharge permit standards and that drinking water meets State and Federal regulations. * Learn to collect samples for analysis, prepare glassware and equipment for lab use and perform lab housekeeping duties as necessary. * Learn to perform mathematical calculations and statistical analysis for test results; * Learn to maintain and perform minor repairs on laboratory and field equipment. * Learn to coordinate sample collection and provide input for process evaluation. * Participate in special projects or studies as assigned. * Observe and enforce safety rules. * Assist with the preparation of technical and administrative reports, and other written documents, including the submittal of all regulatory required reports. * Build and maintain positive relationships with staff through clear and concise communication. * Subject to rotating shifts, weekends, and holidays. * Perform related duties as assigned. Laboratory Analyst II In addition to the essential functions for Laboratory Analyst I classification. * Perform a variety of basic and advanced chemical, biological, and bacteriological tests of water, wastewater, and solids necessary to ensure that plant processes meet wastewater treatment and NPDES discharge permit standards and that drinking water meets State and Federal regulations. * Collect samples for analysis, prepare glassware and equipment for lab use and perform lab housekeeping duties as necessary. * Perform mathematical calculations and statistical analysis for test results. * Maintain and perform minor repairs on laboratory and field equipment. * Coordinate sample collection and provide input for process evaluation. * Make recommendations for budgetary items. * Oversee and train subordinate staff. Qualifications: Laboratory Analyst I Knowledgeof: * To learn chemistry and microbiology as applied in a water or wastewater treatment laboratory. * To learn analytical procedures used in testing water and wastewater samples and the mathematics used to obtain results. * To learn quality assurance and quality control procedures in the laboratory and water and wastewater sample collection procedures. * To learn general principles and procedures ofwastewater treatment, water treatment and distribution systems. * Safety rules and regulations. * Use of modern office equipment and applicable software. Ability to: * Perform a variety of chemical and biological laboratory tests. * Recognize and communicate water and wastewater process control and compliance issues. * Perform sample collection. * Manage multiple tasks while maintaining accurate results. * Complete all written data entry documentations with attention to detail and accuracy. * Ability to follow oral and written instruction. * Operate modern office equipment and software programs. * Communicate clearly and concisely orally and in writing. * Laboratory Analyst II Knowledge of: In addition to the requirements for the Lab Analyst I classification: * Intermediate to advanced chemistry and microbiology as applied in a water or wastewater treatment laboratory. * Analytical procedures used in testing water and wastewater samples and the mathematics used to obtain results. * Quality assurance and quality control procedures in the laboratory and water and wastewater sample collection procedures. * General principles and procedures of wastewater treatment, water treatment and distribution systems. Ability to: In addition to the requirements for the Lab Analyst I classification: * Assess changing conditions and initiate appropriate action. * Work with limited supervision and exercise sound judgment. Experience and Training Guidelines Any combination of experience and training that would likely provide the required knowledge and abilities is qualifying. A typical way to obtain the knowledge and abilities would be: Training: Laboratory Analyst I Equivalent to a high school diploma or GED certification. Laboratory Analyst II Equivalent to a high school diploma or GED certification and six college units or CEUs in a related field or scholastic general education (i.e. Speech, Math, English, Science, Foreign Language, etc.). Experience: Laboratory Analyst I Experience in a laboratory is desirable but not required. Laboratory Analyst II Two years of increasingly responsible experience in a water and wastewater laboratory analysis similar or greater in size and complexity to the City of Turlock. License: Possession of an appropriate, valid Class C California Driver's License at the time of appointment, to be maintained as a condition of continued employment. Certificate(s): Laboratory Analyst I Possession of a valid Grade I Laboratory Analyst Certification from the California Water Environment Association or a Grade I Water Quality Laboratory Analyst Certification from the CA-NV Section of the American Water Works Association within 24 months of appointment to the position. California Water Environment AssociationEnvironmental Compliance Inspector, Water Distribution and Water Treatment Certification is desired. Laboratory Analyst II Possession of a valid Grade I Laboratory Analyst Certification from the California Water Environment Association or a Grade I Water Quality Laboratory Analyst Certification from the CA-NV Section of the American Water Works Association at time of appointment Obtain a Grade II Laboratory Analyst Certification from the California Water Environment Association or a Grade II Water Quality Laboratory Analyst Certification from the CA-NV Section of the American Water Works Association within 24 months of appointmentto the position. California Water Environment Association Environmental Compliance Inspector, Water Distribution and Water Treatment Certification is desired. ADDITIONAL INFORMATION: Physical Conditions: Maintain the following physical abilities: See well enough to read fine print, computer screens and analytical equipment; hear well enough to receive and understand instructions, converse on the telephone, and in person; use of hands and fingers for use sensitive analytical equipment, computer keyboard, filing, writing and answering telephones; ability to differentiate odors; capable of clear speech; bodily mobility to stand for extended periods, stoop, bend as needed; able to lift and carry objects weighing up to 25 pounds. Selection Process: 1. All applicants must complete a standard City of Turlock application for employment form, supplemental questionnaire and submit the following documentation: * Proof of education-this can be a copy of transcripts or any degree. 2. You may submit your required verification using the following options: * Attach a scanned copy in the "Add Attachment" option (of the NeoGov online application) or * Fax a copy to ************** or * Email a copy to ********************** or * Hand deliver copies of your attachments to 156 S. Broadway, Suite 235, Turlock, CA on or before the final filing date. Applications will be rejected if they are incomplete or the required documentation is not attached. 3. Applications will be reviewed for possession of the minimum qualifications. In the event that a large number of applicants possess the minimum qualifications, applicants who appear to be the most qualified based on their breadth and recency of experience will be invited to compete in the testing process. 4. Candidates invited to compete in the testing process may be required to take a written examination, which is graded on a pass/fail basis. Only those applicants who pass the written examination will advance to the oral examination. The oral examination is tentatively scheduled the week of February 2, 2026. 5. Candidates who participate in the oral examination and receive a score of 70% or more will be placed on an eligibility list. Ranking on the eligibility list is based solely on the results of the oral exam. 6. Completion of a practical exercise may be conducted in order to further evaluate skills relating to essential job functions. 7. Top candidates from the eligibility list will be referred to the Municipal Services Director for final appointment consideration. 8. Final appointment will be contingent upon passing the following: reference review, medical examination which includes a drug/alcohol screening, hearing exam and vision exam. Veteran's Preference System The City of Turlock has adopted a veteran's preference system (effective January 1, 2002). The percentage score achieved through an entrance (non-promotional) examination which ranks applicants on an eligibility list shall be adjusted to provide: (a) one (1) percentage point added to the final test score for each six (6) months of active service during a time of armed conflict, up to a maximum of five (5) points, and (b) five (5) percentage points added to the final test score for veterans who are disabled as a result of active military service during a time of armed conflict, regardless of length of service. To receive preference points, applicants must provide supporting documentation and proof of honorable discharge. In no event shall an applicant receive more than a five (5) point adjustment. This request should be made in section #12 of the employment application form.A copy of your DD214 must be attached for this request to be considered. An Equal Opportunity Employer The City of Turlock is an Equal Opportunity Employer. We are sincerely interested in receiving applications from qualified minorities, women and the disabled. Qualified applicants receive equal consideration without regard to race, color, religion, sex, sexual orientation, national origin, ancestry, age, marital status, physical or mental disability, medical condition, political affiliation or belief except where indicated by requirements of the job. The City of Turlock will make every effort to accommodate applicants that have disabilities that would not allow them to compete in the announced process. Applicants are asked to indicate their request for accommodation in the application form. Medical Examination and Drug/Alcohol Screening The incumbent will be required to take a medical examination including a drug/alcohol screening and be fingerprinted. Customer Service Policy The City of Turlock is committed to quality service to our customers. Our goal is to create a positive, productive and courteous atmosphere for our employees and customers. Employees are evaluated on the quality of customer service they provide Benefits Holidays:Eleven (11) paid holidays and three (3) floating holidays. Vacation:Paid vacation that increases with years of service. Sick Leave:Accrual of one day (eight (8) hours) for each month worked. Retirement:Qualified candidates who are currently a CalPERS member or have been a CalPERS member within the last six (6) months or are subject to reciprocity with another eligible retirement plan, may be a "classic member" and may be enrolled in the City's 2.7% @ 55 plan. Employee pays employee contribution rate of 9% on a pre-tax basis. CalPERS "final compensation" may be based on the highest twelve (12) continuous months of qualifying employment. Non-classic or "new members" will be enrolled in the 2% @ 62 plan and CalPERS "final compensation" will be based on the highest thirty-six (36) continuous months of qualifying employment. Deferred Compensation:The City will match employee's contribution up to one half of one percent (0.5%) of the employee's base salary for each pay period in which employee contributes to the program. Retiree Health Savings (RHS) Vantage Care:Two (2) percent of the employee's base payroll will be deposited in each individual's RHS Vantage Care account. Health:The City offers a generous health, prescription, vision, and dental insurance plans for employees and dependents. Continuous Service Pay: Beginning with the tenth (10th) year and every year thereafter, 1.5% of base salary. Beginning with the fifteenth (15th) year and every year thereafter, 1.5% of base salary. Beginning with the twentieth (20th) year and every year thereafter, 1.5% of base salary. Additional Benefits: Associate/Bachelor/Master's Degree Incentive Pay (If not listed as a minimum qualification)*Educational Reimbursement Program* Computer Loan Program* *Upon completion of probation. Notes: Information contained herein does not constitute an expressed or implied contract as it is subject to change. WHERE TO APPLY City of Turlock Human Relations Department 156 S. Broadway, Suite 235 Turlock, CA 95380-5454 ************** Or Visit our website at: ********************* to apply All applications must be returned to the Human Relations Department no later than Thursday, January22, 2026 at 5 p.m. POSTMARKS WILL NOT BE ACCEPTED. Cell phones are typically incompatible with the online application format or browser. We recommend using a desktop or laptop computer. If you are still having technical difficulties, please call NEOGOV at **************.

FQC (Final Quality Control) San Jose, CA About the job: FULL-TIME/TEMPORARY (POSSIBILITY FOR PERMANENT) About the JobFoxconn Industrial Internet (Fii), is a world leading professional design and manufacturing service provider of communication network equipment, cloud service equipment, precision tools and industrial robots. FII provides customers with intelligent manufacturing services for new forms of electronic equipment products centered on the Industrial Internet platform. As a FQC you will be mainly responsible for testing materials and finished products to ensure they conform to all applicable laws and company standards. Quality Control Technicians test products across the three stages of production (before, in-process, and final) to ensure quality levels are met. QUALIFICATIONS: EDUCATION: High school diploma or GED equivalent and/or training or equivalent combination of education and experience EXPERIENCE: Minimum of 1-2 years of experience in a manufacturing environment LANGUAGE: English proficiency is required, Mandarin proficiency is a plus. SKILLS: Great verbal and written communication skills Familiarity with electronic and mechanical components related to PCBA contract manufacturing Accuracy for documentation Effectively present information and respond to questions from managers and employees Common sense to solve practical problems Knowledge of ESD, IPC-600/610, workmanship standards and experience Attention to detail RESPONSIBILITIES: Use basic inspection tool/device, example: magnifying lens, microscope, caliper, and color pantone Maintains safe and clean working environment by complying with procedures, rules, and regulations Inspect materials or assembled parts or products for defects and deviations from specifications Observe and monitor production operations and equipment to ensure conformance to specifications and make or order necessary process or assembly adjustments Discuss inspection results with those responsible for products Discard or reject products, materials, and equipment not meeting specifications Contributes to team effort by accomplishing related results as needed Develop and maintain inspection reports Ensure compliance to federal and state laws, as well as company standards and specifications Maintain calibration of quality control equipment Perform inspections across all stages of of production Prepare and maintain test data for review Evaluate data and draft reports, noting any relevant deviations from existing standards Identify areas for quality control improvement and implement new methods accordingly Communicate quality or compliance concerns with urgency Pay rate: $22/h Status: Non-Exempt Work schedule: Swing shift: 3:15PM - 11:45PM Foxconn Assembly, LLC is an Equal Opportunity Employer (EOE). All qualified candidates will receive consideration without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, or marital status in accordance with applicable federal, state and local laws. Foxconn Assembly, LLC participates in E-Verify and will provide the federal government with your Form I- 9 information to confirm that you are authorized to work in the U.S.

Prepare chemical solutions and formulations based on standardized or experimental protocols. Conduct synthesis and blending of raw materials to create new or improved chemical products. Operate lab equipment such as mixers, reactors, pH meters, and viscometers. Perform stability, purity, and potency testing on formulations. Record detailed data in lab notebooks and digital systems. Assist in scaling formulations from lab to pilot or full production. Troubleshoot formulation issues and adjust component ratios as needed. Ensure all formulations meet safety, quality, and regulatory standards. Collaborate with chemists, engineers, and quality control teams. Maintain clean and safe lab environments, including proper handling of hazardous materials. Responsibilities * Prepare chemical solutions and formulations based on protocols. * Conduct synthesis and blending of raw materials for chemical products. * Operate lab equipment such as mixers, reactors, pH meters, and viscometers. * Perform stability, purity, and potency testing on formulations. * Record detailed data in lab notebooks and digital systems. * Assist in scaling formulations from lab to pilot or full production. * Troubleshoot formulation issues and adjust component ratios as needed. * Ensure formulations meet safety, quality, and regulatory standards. * Collaborate with chemists, engineers, and quality control teams. * Maintain clean and safe lab environments, handling hazardous materials properly. Essential Skills * Bachelor's degree in Chemistry, Chemical Engineering, or related field. * 1-3 years of experience in manufacturing, chemical formulation, or synthesis. * Ability to make improvements and recommendations to SOPs * Strong understanding of chemical interactions, solubility, and stability. * Excellent documentation and problem-solving skills. * Ability to work independently and in cross-functional teams. Work Environment The work environment includes operating various lab equipment and handling hazardous materials. The role requires maintaining a clean and safe lab setting and adhering to safety, quality, and regulatory standards. Job Type & Location This is a Contract to Hire position based out of Fremont, CA. Pay and Benefits The pay range for this position is $25.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Fremont,CA. Application Deadline This position is anticipated to close on Jan 22, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Job Description FQC (Final Quality Control) San Jose, CA About the job: FULL-TIME/TEMPORARY (POSSIBILITY FOR PERMANENT) About the JobFoxconn Industrial Internet (Fii), is a world leading professional design and manufacturing service provider of communication network equipment, cloud service equipment, precision tools and industrial robots. FII provides customers with intelligent manufacturing services for new forms of electronic equipment products centered on the Industrial Internet platform. As a FQC you will be mainly responsible for testing materials and finished products to ensure they conform to all applicable laws and company standards. Quality Control Technicians test products across the three stages of production (before, in-process, and final) to ensure quality levels are met. QUALIFICATIONS: EDUCATION: High school diploma or GED equivalent and/or training or equivalent combination of education and experience EXPERIENCE: Minimum of 1-2 years of experience in a manufacturing environment LANGUAGE: English proficiency is required, Mandarin proficiency is a plus. SKILLS: Great verbal and written communication skills Familiarity with electronic and mechanical components related to PCBA contract manufacturing Accuracy for documentation Effectively present information and respond to questions from managers and employees Common sense to solve practical problems Knowledge of ESD, IPC-600/610, workmanship standards and experience Attention to detail RESPONSIBILITIES: Use basic inspection tool/device, example: magnifying lens, microscope, caliper, and color pantone Maintains safe and clean working environment by complying with procedures, rules, and regulations Inspect materials or assembled parts or products for defects and deviations from specifications Observe and monitor production operations and equipment to ensure conformance to specifications and make or order necessary process or assembly adjustments Discuss inspection results with those responsible for products Discard or reject products, materials, and equipment not meeting specifications Contributes to team effort by accomplishing related results as needed Develop and maintain inspection reports Ensure compliance to federal and state laws, as well as company standards and specifications Maintain calibration of quality control equipment Perform inspections across all stages of of production Prepare and maintain test data for review Evaluate data and draft reports, noting any relevant deviations from existing standards Identify areas for quality control improvement and implement new methods accordingly Communicate quality or compliance concerns with urgency Pay rate: $22/h Status: Non-Exempt Work schedule: Swing shift: 3:15PM - 11:45PM Foxconn Assembly, LLC is an Equal Opportunity Employer (EOE). All qualified candidates will receive consideration without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, or marital status in accordance with applicable federal, state and local laws. Foxconn Assembly, LLC participates in E-Verify and will provide the federal government with your Form I- 9 information to confirm that you are authorized to work in the U.S. Powered by JazzHR vj Ac8GA8kM

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for sustainability, quality and integrity. Our 99,600 employees operate a network of 2,600 offices and laboratories, working together to enable a better, safer and more interconnected world. Our Hayward, CA laboratory is looking for an experienced laboratory analyst to join their team! The Lab Analyst will prepare and analyze samples with accuracy and precision in accordance to SGS' analytical SOPs. The Lab Analyst works independently and as part of a team to meet daily production targets and ensure turnaround times are met. The Lab Analyst understands and applies basic science principles. The Lab Analyst always follows safe laboratory practices and maintains a safe working environment. Job Functions * After appropriate training independently prepares and analyzes samples according to SGS' analytical SOPs using instrumentation specific to the department and analytical methodologies * Performs routine operation, maintenance, calibration of laboratory instruments/equipment * Preparation and analysis of bulk and solid materials for asbestos content using PLM (Polarized Light Microscopy). Determination of visual percentage and optical properties of asbestos and non-asbestos material. * Preparation and analysis of air, wipe, and bulk samples for metals analaysis. * Entering sample data, analysis data and preparing reports on LIMS system * Inputs and maintains technical information as needed to support the laboratory functions/operations. * Adheres to internal standards, policies and procedures. * Performs other duties as assigned. Work Schedule * Monday - Friday 8 - 5 * Occasional Overtime Qualifications * Associate Degree in a Chemistry or similar scientific discipline and 3-5 years of years' relevant experience in Analytical Chemistry Laboratories (Required) * Bachelor's Degree in a Chemistry or similar scientific discipline and 5+ years of years' relevant experience in Analytical Chemistry Laboratories (Preferred) * Advanced English language skills (Required) * Strong mathematical and reasoning skills (Required) * Proficiency in Microsoft Office programs (Required) * Ability to lift, carry, push, and/or pull upwards of 25 lbs on a frequent basis (Required) This position pays $26 - $28 per hour (dependent on experience) and is eligible for overtime pay. In addition, your compensation package includes the following benefits: * Participation in the Company's benefit programs coincident or following the first of the month in which you are hired. * Immediate eligibility to participate in the Company's 401K Retirement Plan * Paid vacation * Four (4) floating holidays annually * Seven (7) company observed holidays paid * Sick time accrual Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.

Duties and Responsibilities: Perform inspections of purchased parts according to acceptance criteria using standard sampling plan. Able to perform First Article Inspection (FAI) of manufactured parts, electromechanical assemblies and final assemblies. Physical, mechanical and/or electrical measurements in compliance with the company Quality System. Accurately document results of inspection / testing and maintain controlled document files, logs and test records. Inspect cables per wiring configuration. Initiate non-conformance process and assist in resolving non-conformances. Monitor receiving inspection backlog. Able to be flexible with the work schedule. Process SAP transactions to segregate and disposition non-conforming product. Other duties and responsibilities in the Quality Department as assigned. Ability to conduct basic troubleshooting and problem resolution. Education and Experience: High School Diploma or Equivalent. Preferred one year of experience in an FDA regulated environment and/or ISO 13485 standards in the medical device industry and/or in-vitro diagnostics preferred. Technical and physical position requirements: Familiar with measuring equipment such as micrometer, caliper height gauges, plug gauges. Able to lift at least 35 lbs. Strong attention to details and ability to understand and follow complex procedures. Working knowledge and experience in basic computer applications such as Microsoft Word, Excel and Outlook. Effective and clear written and verbal communication skills in English language. The US base salary range for this full-time position is $20.60 - $31.60. Our salary ranges are determined by role, level, and location. The range displayed on each job posting reflects the base pay target range for new hire salaries for the position. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. In addition to compensation, Zoetis offers a comprehensive benefits package that supports the physical, emotional and financial wellbeing of our colleagues and their families including healthcare and insurance benefits beginning on day one, a 401K plan with a match and profit-sharing contribution from Zoetis, and 4 weeks of vacation. Visit zoetisbenefits.com to learn more. Full time RegularColleague Any unsolicited resumes sent to Zoetis from a third party, such as an Agency recruiter, including unsolicited resumes sent to a Zoetis mailing address, fax machine or email address, directly to Zoetis employees, or to Zoetis resume database will be considered Zoetis property. Zoetis will NOT pay a fee for any placement resulting from the receipt of an unsolicited resume. Zoetis will consider any candidate for whom an Agency has submitted an unsolicited resume to have been referred by the Agency free of any charges or fees. This includes any Agency that is an approved/engaged vendor but does not have the appropriate approvals to be engaged on a search. Zoetis is committed to equal opportunity in the terms and conditions of employment for all employees and job applicants without regard to race, color, religion, sex, sexual orientation, age, gender identity or gender expression, national origin, disability or veteran status or any other protected classification. Disabled individuals are given an equal opportunity to use our online application system. We offer reasonable accommodations as an alternative if requested by an individual with a disability. Please contact Zoetis Colleague Services at ********************************** to request an accommodation. Zoetis also complies with all applicable national, state and local laws governing nondiscrimination in employment as well as employment eligibility verification requirements of the Immigration and Nationality Act. All applicants must possess or obtain authorization to work in the US for Zoetis. Zoetis retains sole and exclusive discretion to pursue sponsorship for the acquisition or maintenance of nonimmigrant status and employment eligibility, considering factors such as availability of qualified US workers. Individuals requiring sponsorship must disclose this fact. Please note that Zoetis seeks information related to job applications from candidates for jobs in the U.S. solely via the following: (1) our company website at ********************** site, or (2) via email to/from addresses using only the Zoetis domain of “@zoetis.com”. In addition, Zoetis does not use Google Hangout for any recruitment related activities. Any solicitation or request for information related to job applications with Zoetis via any other means and/or utilizing email addresses with any other domain should be disregarded. In addition, Zoetis will never ask candidates to make any type of personal financial investment related to gaining employment with Zoetis.

Job DescriptionSalary: $23.00 - $25.00 per hour DOE Ideal Candidate Profile Do you fit this profile? Wants to start a CAREER / not just another "job" Wants to make a difference High Moral Standards & Values Positive Helpful Team Player Professional Wants to be the best of the best Is Ready Envirocheck is a growing company and has exciting opportunities for A players on our team. Job Summary Analysis of environmental samples for asbestos fibers, fungal spores, bacteria, and lead (Pb). Applicable equipment includes: A variety of microscopes, including Compound, Stereo, PLM (Polarized Light), and PCM (Phase Contrast). Flame Atomic Absorption Spectrometer IDEXX Colisure, Colilert, and Enterolert Microbiological media Requirements Bachelor's Degree in Biology, Microbiology, Geology, or related science Preferred Experience (not required, will train) Asbestos Analysis by PLM Fiber Analysis by PCM ISO 17025 Microscopes Excel programming is a plus Knowledge of construction (building) materials is a plus Benefits Health Insurance 401K with matching Paid sick / Vacation & Personal Time Paid Company Holidays

Shift: 1st shift, Monday-Friday, Standard working hours Duration: 12 Months Pay range: $25.00 Hourly - $25.00 Hourly Onsite Job The Formulations Lab Wash Technician supports the manufacturing process by cleaning, sanitizing, and preparing lab equipment and materials used in buffer and reagent production. This role ensures all cleaning procedures meet cGMP and safety standards, playing a critical role in maintaining a clean and compliant lab environment. Key Responsibilities: •Clean and sanitize stainless steel tanks, glassware, utensils, and other lab equipment according to SOPs and cGMP requirements •Operate and maintain washers, autoclaves, and other sterilization equipment •Prepare tanks and materials for sterilization, including wrapping and loading/unloading from the autoclave •Assist in routine preventive maintenance and minor troubleshooting of washroom equipment •Transport clean equipment and materials to appropriate staging areas for use in production •Maintain accurate cleaning logs and documentation •Follow safety procedures when working with cleaning agents and potentially biohazardous materials •Notify supervisor of any damaged equipment, procedural deviations, or safety concerns •Maintain stock of cleaning supplies and request resupply as needed •Perform other duties as assigned Minimum Requirements / Qualifications: •High school diploma or equivalent required •Previous experience in a laboratory, pharmaceutical, or manufacturing environment preferred •Ability to follow written and verbal instructions precisely •Strong attention to detail and good documentation practices •Ability to lift up to 50 lbs and work on feet for extended periods •Comfortable working in a cleanroom or controlled lab environment Non-Negotiable Hiring Criteria: •Must comply with GMP, QSRs, ISO, and IVD regulations at all times •Ability to read, write, and understand English instructions •Basic math skills for measurements and inventory counts •Willingness to work in an environment with chemical and biological materials •Basic computer skills;familiarity with Microsoft Outlook and Excel preferred Employee Benefits: At LanceSoft, full time regular employees who work a minimum of 30 hours a week or more are entitled to the following benefits: Four options of medical Insurance Dental and Vision Insurance 401k Contributions Critical Illness Insurance Voluntary Permanent Life Insurance Accident Insurance Other Employee Perks About LanceSoft LanceSoft is rated as one of the largest staffing firms in the US by SIA. Our mission is to establish global cross-culture human connections that further the careers of our employees and strengthen the businesses of our clients. We are driven to use the power of our global network to connect businesses with the right people, and people with the right businesses without bias. We provide Global Workforce Solutions with a human touch.

We are seeking a Server product system-level inspection and testing to join our production team by working efficiently in a fast-paced environment, and helping with system-level testing and troubleshooting. Pay rate: $22- $24 Shift: Swing shift 3:00 pm- 11:30 pm Essential Duties and Responsibilities: Includes the following essential duties and responsibilities (other duties may also be assigned): • Assist with Server system-level inspection & quality report-related paperwork. • Assist server system-level incoming quality control • Assist Server system-level testing & troubleshooting • Perform other production quality-related duties as directed by the supervisor Qualifications: • High school diploma required • At least 1 year in the field of QC/QA function is preferred • Language Skills: English is required; Mandarin is a plus • Be able to comply with overtime requirements • Excellent troubleshooting skills • Actively promotes production, quality, and safety standards • Motivated individual with the willingness to be a good team player #EmploynetJobsSanJose

Job purpose Perform inspection activities in the following areas; Incoming Inspection electrical and mechanical, In-process and Final areas of product. Inspect, audit, and report the quality level of incoming and outgoing products, ensuring that all customer quality requirements are being met such as: appearance, fit, form, function; including on time delivery of shipments. Reject and isolate defective part/s and accurately complete all associated paperwork and data entry with non-conforming reports. Perform duties according to IPC 600, IPC 610 and or J-Std-001 and J-Std-001 Space addendum (latest revisions) and our Quality System work instructions. Properly interpret customer documentation, drawings/blue prints, Bills of Material (BOM), datasheets and specifications and other documents necessary to perform inspection duties. Must be available to work over-time. Cross-train in other areas or perform other duties as required, by the Quality Supervisor. Duties and responsibilities Perform first article/piece inspection of parts at the beginning of each production run and verify requirements are met. Report discrepancies of material, process or design issues. Interface with Production, Inside Sales, Engineering, Program Management and Customer Representative. Perform roving sample inspection and quality audits in designated areas per documentation package to include; drawings, BOM, and other procedures to ensure continuous flow of acceptable products to our customers. Ensure conformity to customers documentation and report in-process concerns and discrepancies using IPC workmanship criteria. Interface with Production and Engineering personnel. Perform 100% final inspection to ensure the quality of materials, processes and overall quality performance has been achieved prior to shipping to Customers. Ensure that all acceptance and/or discrepancies have been documented. Interface with Production, Inside Sales, Engineering, Program Management and Customer Representatives. Perform mechanical and visual inspections in Receiving Inspection and mechanical areas to ensure the quality of incoming Turn-Key material and other services. Maintain quality records for evaluation of performance outside Vendors and throughout internal processes. Research customer history and use experience to determine part acceptance when a decision is needed based on judgment. Act independently and resolve problems by exercising initiative and discretion outside the sphere of specifically described job duties and responsibilities. Qualifications Must have 3-5 years experience as a Quality Inspector in one of the following areas: In Process, Final, or Source Inspection High school diploma or general education degree (GED) Prior manufacturing experience, knowledge of soldering and component recognition Basic reading, writing, and mathematical skills with the ability to write correspondence. Ability to read, write and understand written and verbal instructions. Capable of accurately charting inspection and test data. Physical ability to repetitively lift, stand, climb, and bend etc., within a manufacturing environment. Knowledge of using small hand measuring tools, test lights, capable of working under a microscope. Familiar with ISO9001, AS9100, or ISO13485 processes preferred. Comply with company policies and procedures. Website: **************** EEO / ACCOMMODATIONS Naprotek is an Equal Employment/Affirmative Action employer including Disability/Vets . We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected Veteran status, or any other characteristic protected by federal, state, or local law. If you need a reasonable accommodation for any part of the employment process, please respond to this email and let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address.

Job DescriptionBenefits: 401(k) Health insurance Paid time off 7 Metals Manufacturing is seeking a mid-level Quality Inspector with hands-on experience inspecting sheet metal fabricated parts and CNC-machined components. This role supports in-process and final inspection, ensures compliance to engineering drawings and customer requirements, and plays a key role in producing First Article Inspection Reports (FAIRs) for multiple customers with varying and frequently changing documentation formats. This position is ideal for an inspector with 37 years of experience who is highly proficient in Excel, comfortable building and managing complex FAIR packages, and experienced working in a fast-paced, high-mix manufacturing environment. Key Responsibilities Inspection & Quality Control Perform in-process and final inspections of sheet metal and CNC-machined parts Inspect parts to engineering drawings, GD&T, and customer specifications Verify dimensions, tolerances, material, finishes, coatings, and hardware installation Perform First Article Inspections (FAI / FAIR) in accordance with customer-specific requirements Identify nonconforming product and initiate Nonconformance Reports (NCRs) FAIRs, Excel & Documentation (Critical Function) Create, manage, and maintain FAIR packages for multiple customers Work with constantly changing customer FAIR formats, templates, and requirements Build and modify Excel-based FAIRs, including: Linked cells, formulas, and structured tables Multi-sheet workbooks Clear traceability between drawings, ballooned characteristics, and results Ensure FAIRs are complete, accurate, and customer-ready prior to submission Organize and maintain inspection and FAIR records in accordance with ISO 9001 and customer requirements Measurement & Equipment Use precision inspection tools including: Calipers, micrometers, height gauges Pin, thread, and functional gauges Optical comparator (as applicable) Support or assist with CMM and/or FARO arm inspections (preferred) Audits, Root Cause & Support Support customer audits and internal audits Assist in root cause investigations and corrective actions Communicate quality issues clearly to production, engineering, and management Support continuous improvement initiatives related to inspection and documentation Required Qualifications 37 years experience as a Quality Inspector in a manufacturing environment Proven experience inspecting sheet metal fabricated parts and CNC-machined components Strong ability to read and interpret engineering drawings and GD&T Very strong Excel skills (required), including: Creating and managing multi-sheet workbooks Using formulas and structured layouts Adapting to new customer FAIR templates quickly Extensive experience creating FAIRs for multiple customers with different and evolving formats Proficient with standard inspection tools (calipers, micrometers, gauges) High attention to detail and documentation accuracy Preferred Qualifications Experience with CMM and/or FARO arm inspection Familiarity with ISO 9001 or similar quality systems Experience in high-mix / low-to-medium volume manufacturing Exposure to customer corrective action systems (SCARs, 8D, root cause) Soft Skills Highly organized and detail-oriented Strong written and verbal communication Ability to manage multiple FAIRs and priorities simultaneously Comfortable working independently with minimal supervision Professional and confident during customer interactions and audits Physical Requirements Ability to stand and move throughout the shop floor Ability to lift up to 50 lbs as required Manual dexterity for precision measurement tasks Growth Opportunity Path to Senior Quality Inspector or Quality Lead Increased ownership of customer-facing quality documentation Opportunity to help standardize and improve FAIR processes Hours 7:00am - 3:30pm, Mon - Fri In Person only

Sirius Staffing is seeking Megasys Gas & Chemical Technicians in Fremont, CA. In this role, you will support the technical demands of site gas and chemical equipment, ensuring compliance with operational and maintenance procedures, emergency preparedness, and flawless execution. Schedule during training: Monday - Friday, 7a-4p After training schedule: TBD; site works various schedules/shifts. 7a-7p 12-hour compressed shifts. (Sun, Mon, Tues, and every other Wed) then (Thurs, Fri, Sat, and every other Wed) Pay Range: $27-30/hr. BOE Responsibilities: Support the operation and maintenance of site gas and chemical equipment. Perform cylinder and drum changes on gas and chemical distribution systems. Troubleshoot complex equipment issues and perform problem resolution. Ensure compliance with SOPs, safety standards, and preventative maintenance requirements. Maintain and support 500+ pieces of gas and chemical distribution equipment from multiple vendors. Promote a zero safety and zero quality incident culture. Participate in safety programs, quality management, preventative maintenance, and training. With experience, support installation, decommissioning, troubleshooting, and repair of EMD Electronics gas, precursor, and bulk chemical distribution systems. Qualifications: High School diploma or equivalent required 1+ years of experience as a maintenance or equipment technician Must have a valid Driver's license Clear English communication skills Clean-shaven to wear a respirator (when needed) Preferred Qualifications: Experience with chemical and gas distribution equipment Navy Nuclear power school or Military mechanic trained Why Join Us? Weekly Pay Competitive Pay Comprehensive Benefits Package (available after the required waiting period) Medical Insurance - Provided through Cigna, covering routine wellness services at no cost, plus high and low plan options. Prescription Coverage Options, Vision & Dental Coverage through Guardian Supplemental Life Insurance with AD&D and Dependent Options, Short-Term & Long-Term Disability Coverage Voluntary Accident, Critical Illness, and Cancer Insurance Cyber and Legal Coverage Options Telemedicine Options & Employee Assistance Program (EAP) Exciting Career Growth Opportunities Supportive and Inclusive Work Environment Inexperienced and experienced will undergo comprehensive OJT and technical training and qualification programs. 5 levels of technicians offer a fast-paced promotion track. This is a career opportunity in a growing industry. Sirius Staffing is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to characteristics such as race, color, national origin, religion, gender, age, marital status, disability, veteran status, citizenship status, sexual orientation, gender identity, or any other status protected by law.

Position: Quality Inspector 3Job Type: Contract-to-Hire Compensation: $20-23/hr OverviewWe are seeking a QC Inspector 3 to support inspection activities for electrical switchgear cabinets in a manufacturing environment. This role is primarily focused on visual inspection, with some mechanical quality checks, and requires a basic understanding of electrical schematics. This is a great opportunity for quality professionals looking for steady first-shift hours and long-term potential. Key Responsibilities Perform visual inspections of electrical switchgear cabinets to ensure workmanship and quality standards Conduct basic mechanical quality inspections on assembled components Review work instructions, drawings, and basic electrical schematics to verify product conformance Ensure all required manufacturing and inspection steps have been completed prior to product release Identify, document, and report non-conforming material Communicate quality issues to production and quality teams Accurately document inspection results in quality systems or logs Follow all safety, quality, and inspection procedures Qualifications High school diploma or equivalent 1+ year of quality inspection or manufacturing experience Strong attention to detail with a focus on visual inspection Basic ability to read and understand schematics or drawings Comfortable working in a manufacturing environment Ability to work independently with minimal supervision qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or genetic information.

Job Description AOSense, Inc. is the leading developer and manufacturer of innovative quantum technologies employing atom optics. Our products use frequency-stabilized lasers and atoms in a vacuum cell to measure accelerations, rotations, magnetic fields, and time with unparalleled accuracy and stability. Our staff includes physicists, engineers, and technicians with expertise covering a wide array of disciplines. Our teams are dynamic and fast paced since our hardware is cutting edge. POSITION SUMMARY: We are seeking an R&D technician who specializes in precision assembly and testing. As a hands-on R&D Technician at AOSense, you will work with physicists and engineers to build and test high-performance, fieldable accelerometers, gyroscopes, gravimeters, atomic clocks, frequency standards, and magnetometers, as well as component technologies that we sell commercially to the R&D community. RESPONSIBILITIES: Collaborate with physicists and engineers to assemble and test complex quantum sensor and atomic clock hardware Procure and track inventories of mechanical, optical, vacuum, and electrical components Coordinate component and subsystem fabrication, assembly, and test Assemble precision mechanical systems Align lasers through optical systems Procure and maintain laboratory equipment and supplies Collaborate with engineers to define and implement test plans Bake out and leak test vacuum systems Document and report results of validation testing Requirements Demonstrated success in precision mechanical assembly of prototypes and products Enthusiasm for developing expertise in new fabrication disciplines Proven organizational skills and attention to detail Hands-on experience with test equipment Excellent troubleshooting skills Applicants should thrive in a dynamic environment U.S. Government contracts require applicants to be U.S. citizens or permanent residents DESIRED EXPERIENCE: Expertise aligning and securing micro-optical components Hands-on experience with vacuum system assembly and testing Adept in glovebox assembly work Sensitivity to cleanliness requirements of vacuum and optical assemblies Skilled in mechanical prototyping, including basic machining and finishing operations Practical experience with advanced bonding methods, including soldering, brazing, and adhesives Proficiency with SolidWorks mechanical design software Familiarity with electronics prototyping, including reading schematics, PCB fabrication, assembly, soldering, and rework Experience testing low-noise analog, mixed-signal, and rf electronics Basic knowledge of data acquisition and analysis software such as LabVIEW, MATLAB, and Python EDUCATION AND EXPERIENCE: Associate degree in a relevant technical field or equivalent professional experience, with experience in an R&D environment Benefits Salary depends on qualifications and experience Medical and dental Retirement Stock plan AOSense is an equal opportunity employer (EOE) and considers qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran or disability status, or any other federal, state or local protected class. AOSense is committed to providing equal employment opportunity to qualified individuals with disabilities. If you are disabled and require special assistance or a reasonable accommodation while seeking employment with AOSense, then please contact us via email at ******************* or call ************** x210

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for sustainability, quality and integrity. Our 99,600 employees operate a network of 2,600 offices and laboratories, working together to enable a better, safer and more interconnected world. Our Hayward, CA laboratory is looking for an experienced laboratory analyst to join their team! The Lab Analyst will prepare and analyze samples with accuracy and precision in accordance to SGS' analytical SOPs. The Lab Analyst works independently and as part of a team to meet daily production targets and ensure turnaround times are met. The Lab Analyst understands and applies basic science principles. The Lab Analyst always follows safe laboratory practices and maintains a safe working environment. Job Functions After appropriate training independently prepares and analyzes samples according to SGS' analytical SOPs using instrumentation specific to the department and analytical methodologies Performs routine operation, maintenance, calibration of laboratory instruments/equipment Preparation and analysis of bulk and solid materials for asbestos content using PLM (Polarized Light Microscopy). Determination of visual percentage and optical properties of asbestos and non-asbestos material. Preparation and analysis of air, wipe, and bulk samples for metals analaysis. Entering sample data, analysis data and preparing reports on LIMS system Inputs and maintains technical information as needed to support the laboratory functions/operations. Adheres to internal standards, policies and procedures. Performs other duties as assigned. Work Schedule Monday - Friday 8 - 5 Occasional Overtime Qualifications Associate Degree in a Chemistry or similar scientific discipline and 3-5 years of years' relevant experience in Analytical Chemistry Laboratories (Required) Bachelor's Degree in a Chemistry or similar scientific discipline and 5+ years of years' relevant experience in Analytical Chemistry Laboratories (Preferred) Advanced English language skills (Required) Strong mathematical and reasoning skills (Required) Proficiency in Microsoft Office programs (Required) Ability to lift, carry, push, and/or pull upwards of 25 lbs on a frequent basis (Required) This position pays $26 - $28 per hour (dependent on experience) and is eligible for overtime pay. In addition, your compensation package includes the following benefits: Participation in the Company's benefit programs coincident or following the first of the month in which you are hired. Immediate eligibility to participate in the Company's 401K Retirement Plan Paid vacation Four (4) floating holidays annually Seven (7) company observed holidays paid Sick time accrual Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.

Ideal Candidate Profile Do you fit this profile? Wants to start a CAREER / not just another "job" Wants to make a difference High Moral Standards & Values Positive Helpful Team Player Professional Wants to be the best of the best Is Ready Envirocheck is a growing company and has exciting opportunities for “A” players on our team. Job Summary Analysis of environmental samples for asbestos fibers, fungal spores, bacteria, and lead (Pb). Applicable equipment includes: A variety of microscopes, including Compound, Stereo, PLM (Polarized Light), and PCM (Phase Contrast). Flame Atomic Absorption Spectrometer IDEXX Colisure, Colilert, and Enterolert Microbiological media Requirements Bachelor's Degree in Biology, Microbiology, Geology, or related science Preferred Experience (not required, will train) Asbestos Analysis by PLM Fiber Analysis by PCM ISO 17025 Microscopes Excel programming is a plus Knowledge of construction (building) materials is a plus Benefits Health Insurance 401K with matching Paid sick / Vacation & Personal Time Paid Company Holidays