Quality control analyst jobs in Metuchen, NJ

Looking for candidates at Chemist I, II and III levels responsible for carrying out analytical method validation/verification activities and testing for Oral Solids, Oral Liquids, Topicals and Powders. MAJOR DUTIES/RESPONSIBILITIES: Develop/Validate/Verify analytical (HPLC, GC, ICP-MS/OES, other) methods for assay and impurities determination in drug substances and drug products. Perform wet chemistry and chromatographic testing for raw materials and products under development phase Perform stability studies for drug products in development phase and generate reports Develop and validate cleaning methods and generated study protocols and reports Prepare relevant protocols, reports, and final methods Maintain proper instrument calibration status Ensure that work is carried out safely and in compliance with the organization's quality system Ensure that quality documentation is generated and updated to reflect current best practice in a timely manner. Perform peer review at Chemist III level, not required if you're applying for Chemist I/II levels. Perform other duties as assigned. MINIMUM/PREFERRED REQUIREMENTS: Education: Bachelor or Master's degree in science or Pharmaceutics. Experience: Bachelor's with 2-7 years of experience in a generic pharmaceutical analytical lab. Master's is preferred. Candidates shall be considered for different positions based on educational qualification and experience. Good understanding of cGMPs is a must for experienced candidates. PHYSICAL DEMANDS/ENVIRONMENTAL CONDITIONS: Laboratory and office environment Able to lift about 25 pounds. Able to stand and or sit for longer period of time. On-site, Full-time, Day Shift

At Corbion, we exist to champion preservation in all its forms, preserving food and food production, health, and our planet. The Quality Control Technician is a 2nd shift position based at the Totowa, NJ plant reporting to the Quality Control Supervisor. This role is responsible for performing daily analytical tests, pre-operation and line audits, and ensuring production procedures and systems are followed. The position ensures that all quality standards are consistently met while supporting the development of QC team members. Essential Functions * Follow all GMP's (Good Manufacturing Practices), FSMA, Safety, and Environmental regulations as well as company policies. * Maintain positive attitude. Focus on the customer, teamwork, and quality productivity. * Give recommendations to improve workplace safety, efficiency, and to better serve the customer. * Analyze finished product for various analytical testing including redox, Chittick, pH, %moisture, color, titratable acid (TA), enzymes, vitamins, proteins, etc., on a daily basis. * Daily verification/calibration of lab equipment prior to testing finished product to ensure product quality. * Maintain the cleanliness of the lab making sure that the areas are clean after testing. * Ensure that lot codes and finished products package is correct and legible. * Product that has been analyzed and does not meet specification, must be re-sampled and re-analyzed immediately. If product is not in compliance, HOLD stickers must be applied immediately and system hold activated. * Participate in and successfully complete all required laboratory training classes. * Complete the picking, testing and approval of raw materials, issuing deviation when the material is out of specification and reporting to the supervisor/manager. * Keeping record of the materials that need to be tested for micro and send the samples on time. * Duties, responsibilities and activities may change or new ones may be assigned at any time with or without notice. Education & Experience * Bachelor's Degree in Chemistry, Bio-Chemistry, Chemical Engineering, Biology or Microbiology. * Experience in a laboratory environment within a related industry is required. * SAP/Sample Manager experience preferred. Knowledge, Skills and Abilities * Strong analytical and problem-solving skills. * Knowledge of laboratory testing procedures and equipment calibration. * Ability to maintain compliance with GMPs, FSMA, HACCP, and company policies. * Strong communication and teamwork skills. Working Environment * Manufacturing plant with large open floor areas and loud machinery. * Exposure to high temperatures in summer and cold environments in winter. * Dusty environment due to raw materials. * Exposure to allergens including eggs, soy, sesame seeds, milk, and wheat. Physical Demands * Must wear GMP-compliant hair and beard nets, company-provided uniforms, gloves, and, in some areas, respirators. * Ability to stand for long periods and perform repetitive laboratory or line auditing tasks. * Must be able to lift up to 55 lbs. Our offer The below reflects the range of possible compensation for this role at the time of this posting. This range may be modified in the future. An employee's position within the salary range will be based on several factors including, but not limited to, relevant education, qualifications, certifications, experience, skills, seniority, performance, location and business or organizational needs. The base salary range for this role is $24.00 to $25.00 per hour. In addition, we offer: * Variable bonus potential * Paid time off, including company holidays * Medical, dental and vision coverage * 401K with company match * Education assistance * Short- and long-term disability * Employee Assistance Program (EAP) About Corbion Corbion is the global market leader in lactic acid and its derivatives, and a leading supplier of emulsifiers, functional enzyme blends, minerals, vitamins, and algae ingredients. We use our unique expertise in fermentation and other processes to deliver sustainable solutions for the preservation of food and food production, health, and our planet. For over 100 years, we have been uncompromising in our commitment to safety, quality, innovation and performance. Drawing on our deep application and product knowledge, we work side-by-side with customers to make our cutting-edge technologies work for them. Our solutions help differentiate products in markets such as food, home & personal care, animal nutrition, pharmaceuticals, medical devices, and bioplastics. In 2024, Corbion generated annual sales of €1,288.1 million and had a workforce of 2,399 FTE. Corbion is listed on Euronext Amsterdam. For more information: *************** Corbion is an equal opportunity employer and committed to a diverse workplace. All applicants will be considered equally without regard to race, color, ethnicity, veteran status, religion, national origin, marital status, political affiliation, age, sex, sexual orientation, handicapping condition, membership in an organization or any other non-merit factors. Corbion provides reasonable accommodation to applicants. EOE/M/F/Vet/Disabled Corbion does not accept unsolicited resumes from individual recruiters or third party recruiting agencies in response to job postings. No fee will be paid to third parties who submit unsolicited candidates directly to our hiring managers. All candidates must be submitted by approved Corbion vendors who have been expressly requested to make a submission by our Talent Acquisition team for a specific job opening. No placement fees will be paid to any firm unless such a request has been made by the Corbion Talent Acquisition team and such candidate was submitted to the Corbion Talent Acquisition Team.

Resillion is a strategic partner for quality assurance. We offer worldwide services on the field of quality technology, testing, conformity, interoperability and assurance, from initiation to launch - for the software system, cybersecurity, the device, digital products and media content. With a passion for quality, Resillion provides end-to-end solutions to support customers in their strategic digital initiatives and offers a holistic approach for both software and hardware. Via our office in Europe, the United Kingdom, the USA, India and China, we bring together more than 500 experts who are committed to success. We combine the best human and artificial intelligence (AI) on advanced solutions for quality technology in the liver. Resillion offers deep sector knowledge and works together with the world's leading companies in telecom, media, energy & utilities, health care, finance and consumer electronics. ***************** Job Description Set up playback devices, QC bays and monitors/ scopes according to established specifications. Verify correct format, aspect ratio, audio configuration and file metadata based on client specifications and previous title history. Take accurate line count and video/ audio measurements using industry standard waveform scopes and audio meters. Perform thorough mastering level quality control inspection noting any and all audio/ video impairments and anomalies. Ensure reports are consistent and accurate across all previous versions of a given title, which may require tracking new anomalies back to original sources and other aspect ratios/ formats. Troubleshoot any technical issues with playback of assigned jobs. Provide additional information regarding a particular job or specific anomaly as needed. May be required to perform other duties as needed (including, but not limited to: file transmission and data management, training other operators, client review sessions, etc.) Qualifications Solid understanding of a wide variety of film, video and audio impairments and their underlying causes. Extensive experience with all SD and HD formats and timecode 2K, UHD and 4K and HDR-10 and Dolby Vision experience a huge plus. Extensive experience with any and all file-based workflows (including, but not limited to Tiff, DPX, J2K, ProRes, IMF packages). Solid Clipster proficiency including building. cp files and understanding of timeline output settings/ bin clip properties Experience with ColorFront Transkoder for QC or Production a plus Abilitiy to read and understand MaxFaLL and MaxCLL HDR reports. Superior attention to detail and accuracy. Ability to think in a logical and organized manner and work efficiently under tight deadlines with minimal supervision. Strong computer, scientific, and organizational skills Excellent communication (oral and written) and attention to detail Ability to work independently and as part of a team, self-motivation, adaptability, and a positive attitude Ability to learn new techniques, perform multiple tasks simultaneously, keep accurate records, follow instructions, and comply with company policies Basic Minimum Qualifications: 3 to 5 years' experience as a Mastering Quality Control operator, working in a professional Post Production facility or studio. Authorization to work in the United States indefinitely without restriction or sponsorship. Additional Information Location: New York, NY Employment Type: Part-Time- On as needed basis Schedule: Swing Shift Salary: $25.00-28.00 Per Hour

Resillion US, LLC. is a leading content QC company that works with major streaming services and entertainment platforms to bring diverse stories to a global audience. We value precision, inclusivity, and creativity in delivering the best viewing experience to subscribers all around the world. One of our specialties focused on preserving and revitalizing iconic content for audiences around the world. We are passionate about blending artistry with state-of-the-art technology to restore classic films, television shows, and media to their original brilliance while enhancing them for modern viewing standards. Our high-profile projects celebrate the history of entertainment and push the boundaries of digital restoration. Job Description Set up playback devices, QC bays, and monitors/ scopes according to established specifications. Verify correct format, aspect ratio, audio configuration, and file metadata based on client specifications and previous title history. Take accurate line count and video/ audio measurements using industry standard waveform scopes and audio meters. Perform thorough mastering level quality control inspection noting any and all audio/ video impairments and anomalies. Ensure reports are consistent and accurate across all previous versions of a given title, which may require tracking new anomalies back to original sources and other aspect ratios/ formats. Troubleshoot any technical issues with playback of assigned jobs. Provide additional information regarding a particular job or specific anomaly as needed. May be required to perform other duties as needed (including, but not limited to: file transmission and data management, training other operators, client review sessions, etc.) The ideal candidate would possess : Solid understanding of a wide variety of film, video and audio impairments and their underlying causes. Extensive experience with all SD and HD formats and timecode 2K, UHD and 4K and HDR-10 and Dolby Vision experience a huge plus. Extensive experience with any and all file-based workflows (including, but not limited to Tiff, DPX, J2K, ProRes, IMF packages). Solid DaVinci Resolve proficiency, including building files and understanding of timeline output settings/ bin clip properties Experience with ColorFront Transkoder for QC or Production a plus Abilitiy to read and understand MaxFaLL and MaxCLL HDR reports. Superior attention to detail and accuracy. Ability to think in a logical and organized manner and work efficiently under tight deadlines with minimal supervision. Strong computer, scientific, and organizational skills Excellent communication (oral and written) and attention to detail Ability to work independently and as part of a team, self-motivation, adaptability, and a positive attitude Ability to learn new techniques, perform multiple tasks simultaneously, keep accurate records, follow instructions, and comply with company policies Salary Range $25.00-27.00 Per Hour Qualifications 3 to 5 years experience as a Mastering Quality Control operator, working in a professional Post Production facility or studio. Authorization to work in the United States indefinitely without restriction or sponsorship Additional Information Equal Employment Opportunity - Resillion US, LLC is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, color, religious creed, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth and related medical conditions), gender identity or expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, protected medical condition as defined by applicable state or local law (such as cancer), genetic information, or any other characteristic protected by applicable federal, state or local laws and ordinances. Resillion US, LLC management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities, access to facilities and programs and general treatment during employment. All your information will be kept confidential according to EEO guidelines. Disclaimers Headhunters and recruitment agencies may not submit resumes/CVs through this website or directly to managers. Resillion does not accept unsolicited headhunter and agency resumes and will not pay fees to any third-party agency. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. All offers of employment at Resillion US, LLC. are contingent upon clear results of a thorough background check.

Integrated Resources, Inc is a premier staffing firm recognized as one of the tri-states most well-respected professional specialty firms. IRI has built its reputation on excellent service and integrity since its inception in 1996. Our mission centers on delivering only the best quality talent, the first time and every time. We provide quality resources in four specialty areas: Information Technology (IT), Clinical Research, Rehabilitation Therapy and Nursing. Title: Scientist I Duration: 6 Months (Possibility of Extension) Location: Ewing NJ 08628 Shift - Can be flexible, can start as early as 7:30 AM (end at 4 PM), up to 9 AM (end at 5:30 PM) Job Description The Analytical Scientist will be involved in the design, planning, organization and evaluation of drug product and combination drug/device product development. They will perform analytical testing on formulation and manufacturing intermediate dosage forms as well as inhalation devices (aerosol performance testing) as part of a project team within Analytical Chemistry. The position requires use and application of analytical chemistry principles, theories, and concepts. Work is directly supervised. The Analytical Scientist will follow established procedures and methodologies and contributes to completion of routine scientific/technical tasks and has limited discretion to vary from established procedures. Ability to work both closely with other team members from various disciplines as well as the ability to work independently when needed. The Analytical Scientist will assist with the development of new procedures and methodologies (based on prior established techniques at this site) to develop solutions to solve scientific/technical problems of limited scope. Qualifications Mandatory and/or minimum requirements: Prior experience with aerosol performance testing of inhalation dosage forms is required - (1 year or more of experience is required) Prior experience with aerosol performance testing in a pharmaceutical environment (R&D preferred but QC setting acceptable) Ability to work in a team-based / collaborative environment Excellent documentation skills Desirable attributes/qualifications: Prior experience with Waters Alliance HPLCs and Empower Prior experience creating technical documents including standard operating procedures and reports Prior experience with MS Word, Excel, and PowerPoint for presenting data Attention to detail in execution and documentation Required levels experience and/or education: BS/MS in Chemistry or a related field, 3-7 yrs of experience (1-3 years could be considered depending upon relevance of experience to our needs) Additional Information Feel free to forward my email to your friends/colleagues who might be available. We do offer referral bonus Thank you for your time and consideration. I look forward to hearing from you! Kind Regards Ruchi Kumari Clinical Recruiter Integrated Resources, Inc. IT Life Sciences Allied Healthcare CRO Certified MBE |GSA - Schedule 66 I GSA - Schedule 621I (DIRECT BOARD) # 732-844-8716 (F) 732-549-5549 LinkedIn: https://www.linkedin.com/in/ruchi-kumari Gold Seal JCAHO Certified ™ for Health Care Staffing “INC 5000's FASTEST GROWING, PRIVATELY HELD COMPANIES” (8th Year in a Row)

Working days: Mon - Fri Working hours: 10am - 7pm We are looking to hire an experienced diamond professional to join our NYC Office. You will be responsible for quality controlling diamonds and gemstones as well as managing all incoming and outgoing shipments to and from the office. The main goal is to ensure that diamonds come in and out of the NYC office in the shortest delay, while ensuring that all diamonds are up to quality standards. About Nivoda Nivoda's growth trajectory has skyrocketed over the past 12 months, and we continue to expand across new regions at an unprecedented pace. Our DNA centers on understanding our customers' needs and offering them a seamless experience. With a growing team based in major cities worldwide, including London, New York, Hong Kong, and Mumbai, Nivoda is becoming the go-to marketplace for the global jewelry industry. We are bold, innovative, and relentless in our pursuit of excellence as we transform an industry steeped in tradition. What you'll do Quality control diamonds and gemstones Receive consolidated shipments via courier partners Mark orders as received in the Nivoda system. Repack and send orders along to the next destination while updating the Nivoda system. Hand-deliver diamonds to local customers when necessary Collect diamonds from local suppliers, perform quality check and package and ship to the next destination. Create shipments using the Nivoda platform and send labels to suppliers to ensure timely delivery. Liaise with suppliers for shipments and forward invoices to the finance department. Assist customer support with queries related to shipping, order updates and urgent delivery requests. Assist in the smooth overall operation of the office. Support in managing the administrative work related to the office. Follow up with courier partners. Process returned diamond from our customers. Assist and advise other team members and management on the continuous improvement of all the processes of the local office. What you'll need Must have 2+ years of hands on diamond/gemstone experience Must have experience in stock control of high value products. Logistics experience or familiarity with different courier services and tracking systems is useful Attention to detail is a must. Honesty, professionalism, and integrity are essential. Alignment with the Nivoda company values and culture. What you'll get Opportunity to join a fast-growing company at an early stage Unlimited PTO Medical, dental and vision cover

Working days: Mon - Fri Working hours: 10am - 7pm We are looking to hire an experienced diamond professional to join our NYC Office. You will be responsible for quality controlling diamonds and gemstones as well as managing all incoming and outgoing shipments to and from the office. The main goal is to ensure that diamonds come in and out of the NYC office in the shortest delay, while ensuring that all diamonds are up to quality standards. About Nivoda Nivoda's growth trajectory has skyrocketed over the past 12 months, and we continue to expand across new regions at an unprecedented pace. Our DNA centers on understanding our customers' needs and offering them a seamless experience. With a growing team based in major cities worldwide, including London, New York, Hong Kong, and Mumbai, Nivoda is becoming the go-to marketplace for the global jewelry industry. We are bold, innovative, and relentless in our pursuit of excellence as we transform an industry steeped in tradition. What you'll do * Quality control diamonds and gemstones * Receive consolidated shipments via courier partners * Mark orders as received in the Nivoda system. * Repack and send orders along to the next destination while updating the Nivoda system. * Hand-deliver diamonds to local customers when necessary * Collect diamonds from local suppliers, perform quality check and package and ship to the next destination. * Create shipments using the Nivoda platform and send labels to suppliers to ensure timely delivery. * Liaise with suppliers for shipments and forward invoices to the finance department. * Assist customer support with queries related to shipping, order updates and urgent delivery requests. * Assist in the smooth overall operation of the office. * Support in managing the administrative work related to the office. * Follow up with courier partners. * Process returned diamond from our customers. * Assist and advise other team members and management on the continuous improvement of all the processes of the local office. What you'll need * Must have 2+ years of hands on diamond/gemstone experience * Must have experience in stock control of high value products. * Logistics experience or familiarity with different courier services and tracking systems is useful * Attention to detail is a must. * Honesty, professionalism, and integrity are essential. * Alignment with the Nivoda company values and culture. What you'll get * Opportunity to join a fast-growing company at an early stage * Unlimited PTO * Medical, dental and vision cover

This role is located in New York City and will require a hybrid work schedule of at least 2 days in office per week. This role is for Officer level candidates. About the Bank Sumitomo Mitsui Trust Bank, Limited was established through the merger of The Sumitomo Trust and Banking Co., Ltd with Chuo Mitsui Trust and Banking, Ltd. on April 1, 2012. We are one of the largest asset managers in Asia and number one among Japanese financial institutions by AUM. The Bank provides an assortment of financial solutions and manages a broad spectrum of financial products across its global branches. Department Overview: The Americas Division (“AD”) was established in the Sumitomo Mitsui Trust Bank, Limited, New York Branch) (“SMTBNY”) to perform corporate functions and supervise U.S. entities. Established under the AD are the “Global Banking Unit (“GBU”), Americas Division” and “Global Markets Unit (“GMU”), Americas Division” which performs business functions. The Operations Risk Management Department (“ORM”) identifies and evaluates operational risks to which the New York Branch (“the Branch”) is inherently exposed as well as enables appropriate mitigating actions. Operations Risk Management (“ORM”) establishes and maintains appropriate policies, procedures and the operational risk management framework that incorporates Operational Risk Assessments, Key Risk Indicators (“KRIs”), and an oversight process through Operational Risk Management Meeting. ORM is directly involved in all operational risk related projects, matters and issues. Your Role Overview: Risk and Control Analyst is accountable for engaging in the proactive identification, escalation, and timely mitigation of operational risks. Responsible for administering Operational Risk and Control Self-Assessment (RCSA) including Control Testing and Risk Register. Participates in the design, supervision, and implementation of an RCSA program to provide support in identifying, assessing, monitoring, and escalating the risk assessments performed by the First Line of the Bank. The analyst is given broad exposure to all functions and business lines within the Americas Division and is expected to execute all aspects of the Operational Risk Management Framework through the 2 nd line of defense oversight activities. Your Duties and Responsibilities: Coordinate and conduct Risk and Control Self-Assessment (“RCSA”). Coordinate and conduct Vendor Risk Assessment, Model Risk Assessment, and Operational Risk Event (Business Continuity) Assessment. Conduct analyses of risk data to identify trends and potential areas of concern. Perform deep dives to assess the design and operational effectiveness of controls surrounding key technology and operations processes, and to identify remediation for gaps to mitigate risks. Challenge risks within scenario analysis. Maintain Risk Registers. Contribute to the New Product Approval process. Research regulatory changes and/or risk trends applicable to area(s) of coverage. Assist in various Operational Risk related projects and initiatives. Proactively contribute to the risk culture and overall awareness of operational risk and contribute to the creation and delivery of operational risk management training and/or workshop sessions. Prepare operational risk reports, schedule meetings, takes notes, prepare minutes, and maintain files for ORM department. Provide analysis and coordination for the ORM department. Provide challenges on key indicators and material operational risks. Identify emerging operational risks in the context of the regulatory and business operation environment and assure that measures are being taken to mitigate these risks. Serve as a subject matter expert for operational risk and control assessments, and independently prepare a comprehensive report. Facilitate accurate and appropriate reporting of operational risks to senior management. Analyze operational risk data (losses, metrics, or assessment results) to identify areas of excessive risk and to ensure that mitigation efforts are having the desired effect(s). Perform other duties and responsibilities as assigned by management. Your Qualifications: Bachelor's degree or equivalent. A minimum of 4-5 years of prior operational risk management experience with a financial institution. Integrative thinking skills, basic risk management knowledge, good organizational, communication and influencing skills. Analytical and thorough approach to form defensible conclusions from risk assessments. Able to present to and respond effectively to internal and external stakeholders. Team-oriented with strong interpersonal skills, able to calmly manage conflict and pressure in a demanding, high-volume environment. Able to be flexible and capable of prioritizing based on changing internal or external demands. Good computer skills in Microsoft Office including Excel, Word, and PowerPoint. Why you should join SuMi Trust:SuMi Trust embraces flexible ways of working when the business and role permits. We provide employees with a hybrid working model, allowing for in-office work and work from home. Our diverse and inclusive environment along with our global presence enables us to collaborate and communicate to meet our business needs. We believe that efficient teams need truth, loyalty, and a strong sense of purpose to balance risk and their targets. We make sustainable business decisions to improve our society and the world. We believe that each person brings a unique value that drives the business though their creativity and passion. The Employee Benefits package includes: Paid Time Off, medical, HSA, vision, dental, FSA, 401(k), profit sharing, legal plan, cancer indemnity plan, disability insurance, life insurance, employee assistance program, commuter benefits, business travel accident, paid volunteer day, paid memberships, paid seminars, and tuition assistance. We offer many socialization opportunities for wellness, financial wellbeing, runs/walks, team building, happy hours, and activities to support the Sustainable Developmental Goals. Check out our LinkedIn for our employee experience: *************************************** We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law. SuMi Trust provides reasonable accommodations for employees and applicants with disabilities consistent with applicable law. If you need a reasonable accommodation during the application

QC Technician oversees regulatory and quality compliance in bakeries, including QC monitoring and issue reporting. It also involves contributing to bakery R&D efforts, working with consultants to develop new products. JOB DUTIES (include but are not limited to the following): Monitor and support the implementation and maintenance of whole Quality Management System. Those programs are but not limited to: record keeping, allergen, pest control, temperature of coolers and freezers, pre-op, internal audit, and quality control. Monitoring the daily QC activities to ensure they are performed to the published procedures and are properly documented. Visit corporate and franchise stores to support and educate bakery teams/ kitchen managers. Regulate quality control of each bakery. Identification of any quality problems and recommend changes in quality standard where necessary. Working with consultants on innovating new potential products for the brand. Testing new recipes in the test kitchens. Data entry using common computer database software (Excel, Access or equivalent). QUALIFICATIONS & SKILLS: Prior bakery experience is required, with preferred experience in bakery industry research and development. Knowledge of baking various types of bread and baking and decorating cakes. Associate Degree, or Bachelors degree, or equivalent years of work experience 3-5 years of combined experience in food or ingredients and manufacturing. Knowledge of GMPs and HACCP. Basic understanding of food production fundamentals Proficiency in MS Office Products (Outlook, Word, Excel & PowerPoint) and basic computer skills. Excellent verbal and written communication skills. Ability to read and interpret procedure manuals and regulatory documents, and to write reports. Ability to effectively present information and respond to questions from management level. Demonstrate ability to manage and prioritize multiple tasks and demands working with minimum supervision. Detail oriented, excellent record keeping and documentation skills Employee Benefit Health Insurance options: PPO Medical, Dental, Vision covered (Company 100% paid) *insurance starts on the very 1st date. Life Insurance (Company 100% paid) Flexible Time (starting time can vary everyday) Short Term and Long-Term Disability Leave (short term 100% covered) Lifestyle Allowance (up to net $70 per Month) Cellphone reimbursement eligible Employee Discounts (40% off company products & services) 401(k) 5% Match (no vesting period!) from Day 1 Paid Time Off (generous and increases by tier!): Max ceiling of 180 hours PTO (15 days) the 1st year and increases by tier. Wellness Day: 40 Hours (Use it or Lose it System) Paid Maternity Leave (paid 100% for 12 weeks) Paid Secondary Caregiver Leave (up to 2 weeks) Paid Creative Leave Paid Holidays (11 days) Educational Benefit Employee Club Activities & Much More! Experience: Baking: 2 years (Required) Willingness to travel: 25% (Required)

As a QC Chemist, you will be responsible for performing day-to-day laboratory activities under prescribed procedures, including qualitative and quantitative analysis, solution preparation, calibration, qualification, and maintenance of laboratory instrumentation. You will also conduct environmental monitoring, assist with technical writing, and perform administrative tasks. Additionally, you will contribute to solving problems, reviewing experimental data, writing protocols/SOPs/validation reports, and training support staff as necessary. You will monitor study procedures to ensure data accuracy and report quality while maintaining a GMP/GLP laboratory. Responsibilities * Conduct analysis in compliance with cGMP requirements, compendia standards, and internal procedures. * Maintain accurate records of analysis and perform documentation to company standards. * Prepare test solutions, volumetric solutions, and samples used in analysis. * Perform assigned sampling, physical, chemical tests and assays on raw materials, active pharmaceutical ingredients, in-process, finished bulk, finished product, and stability products analysis in an FDA regulated lab environment. * Use a variety of analytical instruments such as HPLC, GC, Dissolution, Malvern particle size analyzer, IR, Auto Titrator, UV Spectrophotometer, KF, Potentiometer, etc. * Perform analysis with a practical understanding of the test procedure and instrument operation. * Conduct laboratory investigations under the supervision of the laboratory manager. * Perform maintenance and calibrations of laboratory instruments/equipment. * Comply with all regulatory and in-house requirements including safety, housekeeping, laboratory chemical waste, cGMP, cGLP, and documentation. * Maintain the required level of training needed to perform GMP tasks. * Prepare and/or review test procedures, SOPs, and protocols as assigned. Essential Skills * Proficiency in current Good Manufacturing Practices (cGMP), FDA, and other regulatory requirements. * Experience with analytical techniques such as Dissolution, FT-IR, GC, UV-VIS, KF, TLC. * Knowledge of computer applications and programs related to laboratory applications such as HPLC, FTIR, TOC. * Familiarity with sampling methods and quality control systems. * Understanding of mathematics including statistics. * Proficiency in sample preparation techniques, spectroscopic techniques, and chromatographic systems. * Basic computer knowledge including MS Word, Excel, and Outlook. * 3-5 years of routine testing using HPLC and Dissolution. * Experience with solid oral dosage and focus on raw material, finished product. * Pharma GMP experience, laboratory, wet chemistry, titration, chromatography. Additional Skills & Qualifications * Bachelor's or master's degree in Pharmaceutical, Biological, Chemical science or related field. * 5-6 years of related laboratory work experience; minimum of 5 years as a QC Chemist in a GMP environment. * Ability to work successfully in both a team/matrix environment and independently. * Ability to work in a fast-paced environment, manage priorities and maintain timelines for multiple projects. * Ability to work safely in a chemical laboratory. * Ability to perform basic calculations, read, write, communicate, and handle stress produced by time pressure, customer demands, etc. * Must be able to access all laboratory, manufacturing, and office areas. * Must be able to wear the required PPE for entering laboratory and processing areas. * Specific vision requirements include reading written documents and using a computer. * Ability to sit or stand for prolonged periods and occasionally lift up to 25 lbs. with or without assistance. Work Environment You will be working in a laboratory setting with approximately 10 people. The laboratory is equipped with modern instrumentation and follows strict safety and regulatory protocols. The work environment requires wearing personal protective equipment (PPE) and involves standing or sitting for prolonged periods. The laboratory operates under a fast-paced and dynamic atmosphere, providing an excellent opportunity for growth and development. Pay and Benefits The pay range for this position is $30.00 - $40.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Cranbury,NJ. Application Deadline This position is anticipated to close on Apr 30, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. Diversity, Equity & Inclusion At Actalent, diversity and inclusion are a bridge towards the equity and success of our people. DE&I are embedded into our culture through: * Hiring diverse talent * Maintaining an inclusive environment through persistent self-reflection * Building a culture of care, engagement, and recognition with clear outcomes * Ensuring growth opportunities for our people The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

**General Description:** Perform QC Biochemistry laboratory activities with a primary focus on capillary electrophoresis techniques to support GMP manufacturing, testing, and release of material, intermediates and finished biological products (monoclonal antibodies) under FDA/EU regulations, applicable International Regulations, and BeOne Medicines' processes and procedures. **Essential Functions of the job:** + Perform routine and non-routine testing using capillary electrophoresis techniques (e.g., CE-SDS, CZE, ic IEF) in the QC biochemistry laboratory to ensure timely and compliant generation and reporting of in-process, release, and stability test results in support of manufacturing operations. + Review, interpret, and report analytical data in accordance with GMP regulations and internal procedures. + Lead troubleshooting efforts for analytical methods and instrumentation related to CE. + Conduct laboratory investigations, including OOS, Out of Trend, deviations, and invalid assays. + Implement corrective actions and preventive actions (CAPAs). + Participate in transfer and method validation activities, including protocol preparation, protocol execution, and report preparation. + Support routine operations, including but not limited to instrument qualification and maintenance, SOP generation and revision, test record keeping, etc. + Maintain equipment in a qualified and calibrated state, coordinating with metrology or vendors as needed. + Manage inventory of reagents and supplies for the laboratory. + Participate in internal and external GMP audits, as needed. + Train other junior level analysts and new hires on CE instrumentation, GMP practices, and data analysis. + Serving as subject matter expert in one or more areas of required testing. + Undertake other duties as required. **Core** **Competencies** **, Knowledge, and Skill Requirements** + Bachelor's or above in Chemistry, Biochemistry, or Biotechnology related scientific discipline. + Minimum of 4+ years of GMP testing using capillary electrophoresis techniques in an FDA-regulated biotechnology, pharmaceutical company is required. + Working knowledge and experience with biochemistry analytical methods such as residual DNA by qPCR, host cell protein ELISA, Residual Protein A ELISA, binding activity ELISA, Capillary Electrophoresis (CE), capillary isoelectric focusing (cIEF), etc. + Familiar with Waters Empower Chromatography Data System. + Working knowledge with USP/EP and cGMP/EU GMP regulations. + Familiar with instrument and equipment validation. + Impressive, demonstrable track record and skills/experience gained within a similar position(s), at a similar level. + Strong leadership/team management skills and experience. + Credible and confident communicator (written and verbal) at all levels. + Strong analytical and problem-solving ability. + Hands-on approach, with a 'can do' attitude. + Ability to prioritize, demonstrating good time management skills. + Excellent attention to detail, with the ability to work accurately in a busy and demanding environment. + Self-motivated, with the ability to work proactively using own initiative. + Committed to learning and development. **Significant Contacts** + Interacts with all levels of BeOne employees. **Supervisory Responsibilities:** + N/A All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Quality Control Analytical ScientistAllendale, NJ Lynkx Staffing LLC specializes in placing talented professionals in the Biotechnology, Pharmaceutical and Medical Devices industries in New Jersey. The QC Analytical Scientist will be a member of the Quality Control Department. As a Senior Member of the team the QC Analytical Scientist will be involved in various QC projects and should have a deep understanding of general QC flow and the Product Cycle. Support internal and external customers to ensure that proper and timely execution of all aspects of the clinical analytical method life cycle across clients. Support routine GMP testing as assigned. Mentor and train team members Evaluate corporate and regulatory requirements along with coordination of activities for implementation of these requirements. Write the contents of Analytical Method Transfer and Validation life cycle documentation including master plans, protocols, test methods, and reports. Create validation project plan i.e., timelines and resources and provides status updates to management. Utilize statistical tools for evaluation of method validation and trending data. Identify, evaluate, and implement continuous business process improvements. Perform troubleshooting activities with respect to methods/assays, equipment malfunctions and investigations (Deviations and OOS). Provide support during laboratory investigations. Train QC personnel during method transfer and validation. Provide support during equipment qualification. Consistently produce elevated level of documentation accuracy and clarity according to cGMP documentation practices. Ability to set deadlines and prioritize work for self, group members, and support groups involved. Ability to review/approve work performed by coworkers for accuracy and alignment with procedures. Indirectly may supervise cross functional teams including product development, QA, PMP, and Manufacturing. REQUIREMENT B.S Analytical Chemistry or other scientific field or MS/Ph.D. in Analytical Chemistry or other scientific field with demonstrated experience in Quality Control laboratories for biotechnology products. 8-10 years of experience in the areas of method development, validation, and transfer. Direct GMP Experience. Proficiency in project management skills and tools. Strong background and in-depth knowledge in analytical chemistry e.g. Flow Cytometry, ELISA, HPLC, CE, PCR, etc. Extensive knowledge and experience of QC assay development, transfer and validation, along with cGMPs. Strong Quality orientation with attention to detail required. Analytical and problem-solving skills required. Excellent communication skills, both written and verbal, with all levels of the organization, including the ability to state opinions clearly, ask questions, seek clarification, communicate facts objectively, challenge when appropriate, and pursue issues to resolution. Excellent presentation skills. Ability to communicate to upper management, across departments and within the immediate QC team. Ability to create and manage work plans and timelines and independently manage competing priorities with limited instruction. Highly motivated individual with good interpersonal skills that have proven effective in managing relationships and negotiating solutions while maintaining a level of approachability with colleagues both internal and external. Must be familiar with GMP lab environment and Aseptic techniques. Working EnvironmentMust have the ability to work in a team-oriented environment and with clients Must be able to work during the weekend, holidays, or overtime and as required by the company May be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, and liquid nitrogen Must have the ability to work with specialized equipment Must be able to handle the standard/moderate noise of the manufacturing facility May work with hazardous materials and chemicals Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

**Senior Technician, Quality Control** **Princeton NJ, US** **On-Site** The Senior Technician, Quality Control drives product quality by executing advanced laboratory testing, analyzing results, and managing deviations to ensure compliance with internal and external standards. Applies deep technical expertise to uphold product safety, reliability, and regulatory alignment. Actively contributes to departmental goals in safety, health, environment, and quality, reinforcing customer trust and operational excellence. **Your key responsibilities** + Perform Lab Tests: Independently perform routine and non-routine quality control tests using various analytical and instrumental methods, ensuring accuracy and compliance with specifications. + Data Integrity & Documentation: Validate and document test results with precision, perform plausibility checks, and ensure timely and accurate data entry into designated systems. + Deviation Management: Identify, report, and process quality-related deviations (e.g., OOS) in accordance with established protocols. + OOS Investigation: Conduct initial laboratory investigations for out-of-specification results, ensuring compliance with execution protocols. + Escalate Issues: Identify recurring problems and escalate them to the appropriate person or team. + Equipment Ownership: Maintain responsibility for assigned laboratory instruments, including calibration, basic maintenance, and adherence to GMP and safety standards. **We bring** + Empowerment to make meaningful contributions while upholding ethical standards. + Recognition and celebration of your efforts and accomplishments. + Opportunities for growth and advancement for those who embrace innovation and take initiative. + Collaboration with experts in health, nutrition, and beauty to drive progress. + Customer-first approach, working with world-renowned brands to turn ideas into impactful solutions. + Opportunity to build a career making a significant impact on billions of lives, with the freedom to shape your own path. + Dedication to creating better futures for customers, communities, people, and the planet. + Responsibility and accountability in living company values and driving sustainable solutions. + Supportive environment where individuals are empowered to progress and contribute to meaningful change. **You bring** + Bachelor's degree in Science, or a related field preferred. + 3-5 years of experience in quality control. + Fluency in local language a requirement, other languages encouraged. The salary provided reflects the pay range dsm-firmenich expects to pay the successful candidate for the position. Individual pay offered will be based on the applicant's job-related skills, experience, relevant education, or training, and primary work location. $60,000-80,000 In addition to base salary, we also offer a comprehensive total rewards package, inclusive of annual incentive pay, a retirement savings plan, health care coverage, paid time off, recognition programs and a broad range of other benefits. All benefits and incentives are subject to eligibility requirements. **About dsm-firmenich** At dsm-firmenich, we don't just meet expectations - we go beyond them. Join our global team powered by science, creativity, and a shared purpose: to bring progress to life. From elevating health to making fortified food and sustainable skincare, the impact of your work here will be felt by millions - every single day. Whether it's fragrance that helps you focus, alternative meat that's better for the planet, or reducing sugar without losing flavor, this is where you help shape the future of nutrition, health, and beauty for everyone, everywhere. And while you're making a difference, we'll make sure you're growing too. With learning that never stops, a culture that lifts you up and the freedom to move across businesses, teams, and borders. Your voice matters here. And your ideas? They're essential to our future. Because real progress only happens when we **go beyond, together** . **Inclusion, belonging and equal opportunity statement** At dsm-firmenich, we believe being a force for good starts with the way we treat each other. When people feel supported, included, and free to be themselves, they do their best work - and that's exactly the kind of culture we're building. A place where opportunity is truly equal, authenticity is celebrated, and everyone has the chance to grow, contribute, and feel they belong. We're proud to be an equal opportunity employer, and we're serious about making our hiring process as fair and inclusive as possible. From inclusive language and diverse interview panels to thoughtful sourcing, we're committed to reflecting the world we serve. We welcome candidates from all backgrounds - no matter your gender, ethnicity, sexual orientation, or anything else that makes you, you. And if you have a disability or need any support through the application process, we're here to help - just let us know what you need, and we'll do everything we can to make it work. **Agency statement** _We're managing this search directly at dsm-firmenich. If you're applying as an individual, we'd love to hear from you. We're not accepting agency submissions or proposals involving fees or commissions for this role._

A primary focus of this role is creating and modifying LIMS test plans to support QC activities while adhering to regulatory and data integrity guidelines. The LIMS Coordinator is responsible for tracking and managing laboratory inventories within the LIMS system and to perform and verify daily verification of laboratory data for accuracy and completeness, ensuring compliance with GxP standards before submission for review. Essential Functions: * Register samples and input relevant test results, instrument data, and laboratory information into the LIMS system as per QC procedures. * Manage laboratory inventories, ensuring timely replenishment and accurate record-keeping within the LIMS system as well as generate and run standard reports from the LIMS system for Laboratory Resource tracking. * Perform and verify daily verification data for accuracy and completeness before submitting it for review. * Create, troubleshoot and modify LIMS Test, worksheets, and test plans as needed to support QC activities. * Train new peers in LIMS operations, including sample manager and resource modules. * Assist QC personnel with sample registration and label generation using the LIMS software Additional Responsibilities: * Performs other functions as required or assigned. * Hands on to follow compendial (USP/EP/BP/JP) procedures for wet chemical tests. * Must understand and apply cGMP requirements applicable to quality control laboratory. * Follow up on sample status and testing progress within the LIMS system. * Participate in continuous improvement initiatives to optimize LIMS functionality and workflows.

SGS is the world's leading Testing, Inspection and Certification company. We operate a network of over 2,700 laboratories and business facilities across 119 countries, supported by a team of 99,250 dedicated professionals. With over 145 years of service excellence, we combine the precision and accuracy that define Swiss companies to help organizations achieve the highest standards of quality, safety and compliance. Our brand promise, when you need to be sure, underscores our commitment to reliability, integrity and trust - enabling businesses to thrive with confidence. We proudly deliver our expert services through the SGS name and trusted specialized brands, including Brightsight, Bluesign, Maine Pointe and Nutrasource. SGS is publicly traded on the SIX Swiss Exchange under the ticker symbol SGSN (ISIN CH0002497458, Reuters SGSN.S, Bloomberg SGSN:SW). Our Dayton, NJ laboratory is looking for a Laboratory Analyst to join their AIR team! The Laboratory Analyst prepares and analyzes samples with accuracy and precision in accordance to SGS' analytical SOPs. The Laboratory Analyst works independently and as part of a team to meet daily production targets and ensure hold times and turnaround times are met. The Laboratory Analyst understands and applies basic analytical chemistry principles. The Laboratory Analyst always follows safe laboratory practices and maintains a safe working environment. Job functions: * After appropriate training independently prepares and analyzes samples according to SGS' analytical SOPs using instrumentation specific to the department and analytical methodologies * Performs routine operation, maintenance, calibration of laboratory instruments/equipment * May assist with validation and MDL studies. * Assists with investigation, and preparation of responses to client inquiries and CARs. * Inputs and maintains technical information as needed to support the laboratory functions/operations. * Maintains Laboratory Notebook where applicable. * Adheres to internal standards, policies and procedures. * Performs other duties as assigned. Qualifications * Associate Degree in a Chemistry or similar scientific discipline and 0-2 years of experience in Analytical Chemistry Laboratories OR 3 years of relevant experience (i.e. Sample Prep) (Required) * Bachelor's Degree in a Chemistry or similar scientific discipline and 1-2 years of years' relevant experience in Analytical Chemistry Laboratories (Preferred) * Basic mathematical and reasoning skills (Required) * Experience with Microsoft Office (Excel, Outlook, Word) (Required) * Experience with LIMS (Preferred) * Ability to lift/carry/push and/or pull upwards of 25 lbs on a frequent basis (Required) Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.

Our client is seeking Full -Time Clinical Lab Technologists for their Chemistry Lab! Full time - Alternate Weekends 11:30 pm - 8:00 am 10% night shift differential!! Perform routine and emergency tests on blood and other body fluids using a variety of automated and manual instrumentation promptly. Maintain equipment and records according to department procedures and regulatory agencies guidelines in the areas of QA and QC. Use independent judgment to solve technical and procedural problems. In some instances, the ability to stand or sit for extended periods of time is necessary. Pay Range based on experience: $82,979.96 - $103,286.06 Requirements Must have an active New York license At least 2 years of work experience preferred Bachelor's Degree in physical science, medical technology preferred. Benefits 1199 Members Medical & Dental 403B matching up to 8% of salary Room for Growth Great leadership and support, utilizing the latest advances in computer technology.

Medical Laboratory Technologist to work in the Chemistry/Core Laboratory under the direct supervision of supervisor. Will be responsible for performing a variety of complex and routine test within the Core Laboratory complying with all safety and regulatory requirement. Rotate weekends and scheduled holidays base on the needs of the department; participate in interdepartmental collaboration within the institution, to provide the highest quality patient care.

Job Title: QC Scientist IJob Description Join our team as a QC Scientist I working on the second shift from Sunday to Thursday. You will perform fit-for-purpose testing to support manufacturing, including in-line and finished product release testing using various analytical techniques. Your work will be essential in ensuring the quality of our products. Responsibilities * Perform fit-for-purpose testing following operating procedures. * Prepare standards and samples for analysis and run instrumentation with minimum supervision. * Document and report analytical testing data in LIMS Database and in a laboratory notebook following good documentation practices. * Assist in out-of-specification investigations by performing relevant testing and documenting appropriately. * Make recommendations regarding opportunities to optimize instrumentation methods and provide general feedback on non-instrumentation method opportunities. * Apply knowledge of Lean Six Sigma Processes focusing on supporting continuous improvement activities. * Maintain general lab housekeeping. * Engage in process improvement initiatives to identify cost savings to the business. * Perform additional tasks as assigned by the Supervisor. Essential Skills * Bachelor's degree in Analytical Chemistry, Organic Chemistry, Biochemistry, Biology, or related field from an accredited university. * Minimum of 1 year (2 years preferred) of industry or other relevant market experience, preferably in the chemistry or bio/pharmaceutical industry. * Hands-on experience with wet chemistry and basic analytical instruments. * Familiarity with Analytical test methods including ACS, USP/NF, EP/BP, JP, FCC. * Strong computer, scientific, and organizational skills. * Excellent communication skills (oral and written) with attention to detail, including problem-solving. * Familiarity with reviewing laboratory notebooks and understanding testing performed using various Analytical Chemistry Techniques and instrumentation. * Effective problem-solving abilities using Lean methods. Additional Skills & Qualifications * Familiarity with Lean Six Sigma Processes. * Ability to lift up to 40lbs. Work Environment Work in a GMP Lab environment on a contingent basis, with responsibilities scheduled from Sunday to Thursday during the second shift. The role involves active participation in process improvement activities to support continuous improvement and cost savings. Job Type & Location This is a Contract position based out of Fair Lawn, NJ. Pay and Benefits The pay range for this position is $36.00 - $36.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Fair Lawn,NJ. Application Deadline This position is anticipated to close on Dec 31, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for sustainability, quality and integrity. Our 99,600 employees operate a network of 2,600 offices and laboratories, working together to enable a better, safer and more interconnected world. Our Dayton, NJ laboratory is seeking an entry-level Lab Technician I to join their General Chemistry team! The Lab Technician I will prepare samples with accuracy and precision in accordance to SGS' analytical SOPs. Work independently and as part of a team to meet daily production targets and ensure hold times and turnaround times are met. Always follow safe laboratory practices and maintain a safe working environment. Job Functions * After appropriate training independently prepare samples for analysis according to SGS' analytical SOPs using basic instrumentation specific to the department and analytical methodologies * Performs routine operation, maintenance, calibration of prep instruments/equipment * May assist with validation and MDL studies. * Inputs and maintains technical information as needed to support the laboratory functions/operations. * Maintains Laboratory Notebook where applicable. * Adheres to internal standards, policies, and procedures. * Performs other duties as required. Qualifications * High school diploma (Required) * 0-2 years of experience in Analytical Chemistry Laboratories or prior experience working with one's hands (Required) * Associates Degree in a Chemistry or similar scientific discipline (Preferred) * 1-2 years of years' relevant experience in Analytical Chemistry Laboratories (Preferred) * Language Skills: English (Required) * Mathematical Skills: Basic (Required) * Reasoning Skills/Abilities: Basic (Required) * Computer Skills: Basic (Required) * Ability to lift/carry/push and/or pull upwards of 25 lbs on a frequent basis (Required) Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.