Quality control analyst jobs in Nashville, TN - 43 jobs

Job Title: Quality Control Analyst III REGENESIS is the world's leader in the development of production and environmental restoration products. Our Gallatin, TN facility is expanding and has an opening for a Quality Control Analyst III. Shift: 1 st Shift, full-time. Job Description: The Quality Control Analyst III plays a key role in ensuring the quality and consistency of soil and groundwater remediation products manufactured by REGENESIS. This position is responsible for performing inspections and laboratory testing on raw materials, in-process samples, and finished goods using a variety of analytical methods and instrumentation. The Analyst will document test results, support continuous improvement initiatives, and ensure laboratory equipment is properly calibrated, maintained, and safe to operate. This role reports directly to the Vice President of Quality & Process Improvement and collaborates closely with the Production Manager and Warehouse Supervisor. Key Responsibilities: · Perform quality control testing of raw materials and product samples in accordance with established SOPs. · Collect samples from production equipment and ensure timely, accurate testing. · Record, organize, and report test data using spreadsheets and internal systems. · Immediately communicate out-of-specification results to appropriate leadership. · Support root-cause investigations and assist with implementing corrective and preventive actions. · Operate, calibrate, and maintain laboratory instruments such as balances, viscometers, pH meters, moisture analyzers, and centrifuges. · Communicate professionally with raw material suppliers and laboratory equipment vendors. · Assist with development, revision, and review of SOPs for new and existing production processes. · Partner with warehouse and production teams to evaluate product quality prior to shipment and support staff training on quality expectations. · Maintain compliance with company safety policies for laboratory and manufacturing environments. · Keep the laboratory clean and organized. · Perform additional duties or special projects as assigned. Qualifications Education & Experience High school diploma or GED required. Bachelor's degree in chemistry, quality assurance, or a related field preferred. Minimum 4 years of quality control or quality assurance experience. Experience with ISO 9001 strongly preferred. Skills & Competencies Strong communication skills; able to give and receive feedback effectively. Exceptional organization and attention to detail. Demonstrated initiative, ownership, and reliability. Proficient in Microsoft Word, Excel, and Outlook. Physical Requirements · Ability to stand and work in laboratory and manufacturing environments for extended periods. · Lift up to 40 pounds safely. · Use of ladders and stairs as needed. · Ability to wear required PPE, including safety glasses, gloves, steel-toe boots, lab coats, and occasionally respirators. · Tolerance for moderate noise, odors, and materials that may result in soiled PPE or clothing. Pay/Benefits: · Hourly pay range: $30-$40, depending on experience, education, and related qualifications. · Benefits include: Paid Time Off (PTO) Life insurance Health insurance for employees and dependents 401(k) retirement program Regenesis Biomediation is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Simpson Strong-Tie is a leader in engineered structural connectors, software, and solutions for the building industry. We maintain a reputation as a trusted manufacturer, partner, and corporate citizen committed to our customers and employees. Our founder, Barc Simpson established 9 Principles of Business we live out as company values and have made Simpson Strong-Tie an inspiring place to work since 1956. Our team of talented people are dedicated to our shared mission: to provide solutions that help people design and build safer, stronger structures. Learn about our company culture directly from our team. YOU As an Associate Quality Lab Technician, you will be responsible for incoming material inspections and testing as well as materials produced in-house. This position will challenge you to work as a team to set, achieve, and maintain goals including daily inspection times. You will have the opportunity to work with a dedicated and knowledgeable group of people who support and lead quality improvement efforts to ensure that our products have No Equal in our industry. This position will follow a Monday through Thursday schedule from 5:00 AM to 3:30 PM, with overtime as needed. WHAT YOU'LL BE DOING (% of Time) Inspect incoming materials and parts to ensure vendor quality. Report inspection findings using software programs. Create, revise, or update various spreadsheets and/or electronic records, etc. used to collect information in the lab. (60%) Assure the reliability and consistency of production by checking processes, first piece and final output. Communicate and assist Engineers in resolving non-conformances. (25%) Contribute and participate in various improvement projects within the plant. (10%) Report non-conformances using TQC system and follow through to execution of disposition. (5%) DESIRED SKILLS AND EXPERIENCE If you can do everything listed above, you've got what it takes. Perhaps some of the following would be helpful too: 3 years of experience performing product inspections is required. Ability to work in a Microsoft software environment including Excel, Outlook, PowerPoint, and Word. Ability to have attention to detail and ensure accuracy of information. Ability to identify options for solving a problem. Ability to meet productivity standards, deadlines and work schedules. Ability to fulfill all commitments made to peers, co-workers, and supervisor. Ability to hold self and others accountable for measurable, high-quality, and timely results. Ability to work independently and efficiently. Ability to work well within a small team environment. Excellent verbal and written communication skills. Accountability & Dependability. Able to consistently demonstrate reliable, punctual attendance Mathematical Reasoning: Ability to add and subtract two-digit numbers and to multiple and divide with 10's and 100's. Ability to Work Independently: Follow both written and oral instructions, including safety guidelines, work instructions, and company policies. Attendance: Able to consistently demonstrate reliable, punctual attendance in accordance with our attendance policy. Safety is the top priority. You will be required to quickly recognize and respond to dangerous situations in a safe and efficient manner. You must lead by example by following all Health, Safety, and Environmental (HSE) rules and requirements and wearing the necessary personal protective equipment (PPE) at all times. This includes gloves, protective clothing, heat-resistant gear, and, when required, respirators to protect against burns, chemical exposure, and other potential hazards. Continuously build your skillset to influence decisions and recommend/implement process improvements in an effort to grow department throughput while meeting product quality. Communication Skills: Speak in the most effective way to relay information to all departments and at all levels within the organization. Listen and ask questions to ensure understanding. Quality Standards Knowledge: Demonstrate an understanding of company quality standards and company quality control processes. Problem Solving: Able to solve practical problems and deal with a variety of situations where only limited standardization exists Teamwork: Ability to work with other team members to accomplish group goals Results Focus & Initiative: Ability to multitask and take initiative in a challenging, fast-paced environment. Customer Service Skills: Apply customer service principles and processes on the job and with others Reading Comprehension: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. PHYSICAL REQUIREMENTS AND WORK ENVIRONMENT The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. PHYSICAL REQUIREMENTS While performing the duties of this job, the employee is regularly required to stand, walk, see, talk, and hear. The employee is occasionally required to sit. This role operates large equipment and needs to constantly position self to maintain the operation of equipment. While performing the duties of this job, the employee must possess the ability to lift, carry, push, and pull materials and objects weighing up to 50 pounds, and heavier weights with proper equipment. WORK ENVIRONMENT Regularly work around moving mechanical parts. The noise level is loud. The job may risk exposure to dust, heat and/or cold, wet or humid conditions. TRAVEL REQUIRED No travel is required. This position will require travel to an alternate facility for training prior to startup. WORK STATUS & LOCATION This full-time, non-exempt position is in Gallatin, TN. RELOCATION Relocation is not available for this position. Pay $19.38 - $29.09 / hour REWARDS AT SIMPSON STRONG-TIE We recognize and reward employees with a carefully designed and comprehensive rewards package, including competitive compensation, quarterly bonuses or commission and first-rate benefits. May exclude some positions, such as seasonal jobs. Quarterly Bonuses/Commission: You will be eligible for either a bonus or commission, paid on a quarterly basis. We believe all employees affect customers, sales and revenue - directly or indirectly - and should be rewarded by sharing the company profits. Benefits: We provide a wide range of benefits for eligible full-time employees including: medical, dental, vision, retirement contributions, employee stock purchase and bonus plans, pay for holidays, vacation, sick days, funerals and jury duty, years of service awards, employee discounts, employee referral bonuses, charitable contribution matching, education reimbursement and more. View benefit plan details here: ******************************** In keeping with our values and commitment to diversity, equity, and inclusion in our communities, we are an equal opportunity employer. This means that our employment decisions are based on your qualifications and merit, and our business needs. Please note all job offers are contingent upon a successful background investigation and drug test. Simpson Strong-Tie's drug policy is based upon Federal Law, and therefore will screen applicants for amphetamines, including methamphetamines, cocaine, phencyclidine and opiates. #NowHiring #GetHired #Hiring #HiringNow Company: Simpson Strong-Tie Company Inc.

Discover Vanderbilt University Medical Center: Located in Nashville, Tennessee, and operating at a global crossroads of teaching, discovery, and patient care, VUMC is a community of individuals who come to work each day with the simple aim of changing the world. It is a place where your expertise will be valued, your knowledge expanded, and your abilities challenged. Vanderbilt Health is committed to an environment where everyone has the chance to thrive and where your uniqueness is sought and celebrated. It is a place where employees know they are part of something that is bigger than themselves, take exceptional pride in their work and never settle for what was good enough yesterday. Vanderbilt's mission is to advance health and wellness through preeminent programs in patient care, education, and research. Organization: CSP Endo Techs Job Summary: JOB SUMMARY The Quality Control Specialist works under the direction of the Director of Quality and Safety. Auditors are accountable for the effective implementation of quality systems for sterile processing and strive to enhance patient care outcomes through consistent processes of our quality management programs. Shift Details: 6:30AM - 3:00PM Monday - Friday . KEY RESPONSIBILITIES Measures, monitors, and reports metrics for SPD quality indicators for their specified department and shift though review and analysis of the reports Identifies patterns and trends in data which includes but is not limited to assembled sets completions, error rates with incomplete sets, and improperly assembled sets. Ensures the program follows institutional, departmental, and external regulatory agency guidelines and provides SPD leadership with key quality data recommendations for improvement. Collaborates with SPD leadership by minimizing the frequency of severity of adverse events, managers and investigates the cause of those events to prevent errors Enhances professional growth and development through participation in educational programs. TECHNICAL CAPABILITIES Environmental Sterility & Safety (Intermediate): Possesses sufficient fundamental proficiency to successfully demonstrate environmental sterility and safety in practical applications of moderate difficulty. Surgical Equipment Knowledge (Intermediate): Knowledge of the specific equipment and its performance criteria, capabilities and limitations. Able to use the equipment to accomplish basic tasks associated with the specific devices. May conduct remedial maintenance and preventive maintenance. Examples of this include Insulation Testing, Demagnetizing instrumentation, Air Pressure Testing etc. Equipment Operation and Maintenance (Intermediate): Possesses sufficient fundamental proficiency to successfully demonstrate the ability to maintain equipment, products, or systems in practical applications of moderate difficulty. Examples of this include performing variety qualification testing on different types of equipment (daily, weekly, monthly, etc.) Inventory Control (Intermediate): Possesses sufficient fundamental proficiency to successfully demonstrate inventory control in practical applications of moderate difficulty. Ability to perform a variety of care and handling techniques to maintain the longevity and sterility of different types of containment devices. Quality Assurance (Intermediate): Performs, documents and monitors all quality control tools. Ability to read, interpret and practically apply the various Manufacturer Instructions for Use. Possess a strong knowledge base of regulations and standards that govern sterile processing functions and operations. Distinguisher of position: Possess very high Instrument Intelligence for the selected surgical specialty/service line. Strong knowledge of functionality, cleaning and assembly complexities etc. Data capture of findings from crucial inspections points. Allied health is among the fastest growing occupations in healthcare today. This area can be defined as credentialed professionals who perform supportive, diagnostic, and therapeutic health care services to promote health and prevent disease in a variety of settings. These areas are crucial to Vanderbilt Health's reputation for excellence in these areas that has made us a major center for patient referrals from throughout the Mid-South. Each year, people throughout Tennessee and the southeast choose Vanderbilt Health for their health care because of our leadership in medical science and our dedication to treating patients with dignity and compassion. Core Accountabilities: * Organizational Impact: Performs tasks that are typically routine that may impact team's performance with occasional guidance. * Problem Solving/ Complexity of work: Utilizes some discretion and research to solve routine problems. * Breadth of Knowledge: Applies knowledge of standards, established processes and procedure that apply to your own job. * Team Interaction: Provides guidance to entry level co-workers. Core Capabilities : Supporting Colleagues : Develops Self and Others: Continuously improves own skills by identifying development opportunities.- Builds and Maintains Relationships: Seeks to understand colleagues' priorities, working styles and develops relationships across areas.- Communicates Effectively: Openly shares information with others and communicates in a clear and courteous manner. Delivering Excellent Services: - Serves Others with Compassion: Invests time to understand the problems, needs of others and how to provide excellent service.- Solves Complex Problems: Seeks to understand issues, solves routine problems, and raises proper concerns in a timely manner. - Offers Meaningful Advice and Support: Listens carefully to understand the issues and provides accurate information and support. Ensuring High Quality: - Performs Excellent Work: Checks work quality before delivery and asks relevant questions to meet quality standards. - Fulfills Safety and Regulatory Requirements: Demonstrates basic knowledge of conditions that affect safety and reports unsafe conditions to the appropriate person or department. Managing Resources Effectively : - Demonstrates Accountability: Takes responsibility for completing assigned activities and thinks beyond standard approaches to provide high-quality work/service. - Stewards Organizational Resources: Displays understanding of how personal actions will impact departmental resources. - Makes Data Driven Decisions: Uses accurate information and good decision making to consistently achieve results on time and without error. Fostering Innovation : - Generates New Ideas: Willingly proposes/accepts ideas or initiatives that will impact day-to-day operations by offering suggestions to enhance them. - Applies Technology: Absorbs new technology quickly; understands when to utilize the appropriate tools and procedures to ensure proper course of action. - Adapts to Change: Embraces changes by keeping an open mind to changing plans and incorporates change instructions into own area of work. Position Qualifications: Responsibilities: Certifications: Certified Instrument Specialist - Healthcare Sterile Processing AssociationHealthcare Sterile Processing Association, Certified Registered Central Service Technician - Healthcare Sterile Processing AssociationHealthcare Sterile Processing Association, Certified Sterile Processing Technician - The Certification Board for Sterile Processing and Distribution, Inc Work Experience: Relevant Work Experience Experience Level : 2 years Education: High School Diploma or GED (Required) Vanderbilt Health is committed to fostering an environment where everyone has the chance to thrive and is committed to the principles of equal opportunity. EOE/Vets/Disabled.

Chemical Technician for a Data Center-Clarksville, TN A Water treatment Chemical Technician will be responsible for working at a customer's data center in the Clarksville, TN, area. The Chemical Technician will solve customer water treatment concerns, perform water treatment lab work, commission new piping and system assets, and troubleshoot water treatment and control equipment at a customer's massive data center. As a Technician, you will receive an industry competitive salary, expenses, and benefits. In addition, ample technical support is provided along with continuous training. Compensation is based upon experience and the ability to succeed. $55,000 to $70,000 first year base for a qualified candidate. Plus a year end bonus! We hire with a focus that favors the committed employee both in terms of overall compensation and growth opportunities. We have designed our compensation package accordingly. Benefits include a corporate 401k, health, dental, vision, and life insurance. Garratt-Callahan (wwwgarrattcallahan.com) is family friendly, profitable, stable, and fiercely private. No layoffs in 100+ years. No ownership change in 100+ years. 75+ straight years of profitability. We have operations from Asia, to the Caribbean, and in every state in the USA. Let's talk. Job Responsibilities: Solve customers' water problems. Treat industrial cooling towers to keep them energy efficient and environmentally friendly. Perform detailed water testing & analyses at a data center. Help deliver on customer KPIs and promote Garratt-Callahan solutions including proprietary chemical blends, equipment, & monitoring technology. Commission newly installed assets and control equipment. Reports directly to the Site Manager. Keep our existing customers happy and safe. About Garratt-Callahan: Garratt-Callahan is a US based private 100+ year old, nationwide water treatment chemical company. Garratt-Callahan *********************** treats industrial boilers and cooling towers to keep them energy efficient and environmentally friendly with one of the most advanced product lines in the industry. We are registered to ISO 9001:2015 and sell an industry leading line of “green" solutions, G-C GreenTech. We are headquartered in Burlingame, California. G-C is family owned, profitable, and expanding. We have five chemical plants in the USA, sales people in every state, and operations in Asia, the Pacific, and the Caribbean. Benefits: We offer a competitive benefit package which includes medical, dental, vision, AD&D, LT, and 401k. First year compensation $55,000 to $70,000 plus bonus, depending on experience. A car allowance. Advanced training, and a clear career path. Family friendly, flexible hours. A huge benefit of working for Garratt-Callahan is our stability and low turnover. No Layoffs in our 100+ year history. G-C is a profitable company. The last year that G-C did not turn a profit was during World War 2. To Apply, please log on to : ************************************************************************************************************************ Id=19000101_000001&job Id=557124&source=CC2&lang=en_US Thank you for considering Garratt-Callahan Company. Garratt-Callahan is an EEO/AAE employer. Minorities, women, veterans and individuals with disabilities are encouraged to apply. Requirements : You will be a successful applicant if you have a technical degree such as Chemistry, Chemical Engineering, Biology, Mechanical Engineering, Paper Science, or Water Resources. You must have a 4 year technical degree in the sciences to qualify for this position. A successful applicant must have experience or interest in learning advanced water treatment technologies. A successful applicant must be detail-oriented, adhere to safety protocols, and be able to lift 50 pounds wearing PPE in all weather conditions. One year technical sales, or an internship related to water treatment chemicals is preferred, but we are willing to train and mentor. Outside industrial sales experience is a plus. You must live in or near Clarksville, TN, area, and be familiar with the industrial marketplace of the area. Additional Preferred Qualifications: • Familiarity With Industrial Cooling Towers • Knowledge and Proficiency with Lab Procedures, Water Equipment, & Water Chemistry • Ability to Provide Virtual Presentations to Group • Experience Working in a Team Setting as a Collaborative Partner NOTE: Garratt-Callahan does not sponsor work visas. No recruiters please. If you have a disability, and need assistance during the application and selection process as a result, please contact the Garratt-Callahan Human Resources department at ************. Arrangements can be made to provide an accommodation in order to assist you in applying for an open position using our on-line system, completing any other related paperwork, interviewing, or any other portion of the employment process. This phone number is only for disability assistance. When requesting an accommodation, please provide your name, phone, email address, or any other means of contacting you. Provide a brief description of the nature of the requested accommodation. A member of the Human Resources team will then contact you to discuss your request. A request for an accommodation will not affect your opportunities for employment with Garratt-Callahan. Garratt-Callahan values differing experiences, backgrounds and perspectives among our employees, and see them as a competitive advantage. Garratt-Callahan is committed to the fair and equal treatment of all associates and applicants. Garratt-Callahan is an equal opportunity employer that evaluates qualified applicants without regard to race, color, national origin, religion, sex, age, marital status, disability, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. The “Equal Employment Opportunity is the Law” poster is available at:**************************************************************** Garratt-Callahan Company's reaffirmation of Equal Employment/Affirmative Action Statement************************************************************************ Key Words: Chemistry, chemicals, scientific, science, salesperson, salesman, saleswoman, outside sales, technical sales, account representative, account executive, territory sales, territory manager, district sales, district manager, field engineer, field service, AE, sales engineer, data center, chemical engineer, chemist, mechanical engineer, biologist, biology, microbiology, nalco, ecolab, us water, veolia, Suez, ge water, chemtreat, drew industrial, solenis, chem-aqua, kurita, evoqua, fremont, water treatment, boilers, cooling towers, waste water, pumps, equipment, chillers, polymers, biocides, data center, Clarksville, TN, Nashville, TN.

About Us: Remedy Labs is a leading hemp manufacturing company dedicated to delivering high-quality products. We are seeking a detail-oriented and motivated scientist to join our team and support our research and manufacturing processes. Job Description: At Remedy Labs, you will play a crucial role in ensuring the quality and consistency of our existing products, developing new molecules, and improving yields. You will be responsible for conducting experiments, analyzing samples, and maintaining accurate records to support our operations. This position requires experimental organic chemistry experience, strong attention to detail, analytical skills, and a commitment to maintaining high standards OR exceptional intelligence and desire to learn. Highly qualified applicants (process chemistry experience and/or advanced degrees) will be considered for roles with more responsibility and should indicate their qualifications in bold text at the top of their resume. If you have a non-traditional background that you believe would translate to success in a chemistry lab please surface your story in large bold font at the top of the resume you attach to this application. Key Responsibilities: Execute experiments in an organic chemistry lab. Operate and maintain laboratory/ industrial laboratory equipment, including calibration and troubleshooting. Conduct quality control checks and assist in identifying areas for improvement in the manufacturing process. Collaborate with production and quality assurance teams to address any issues related to product quality. Maintain a clean and organized laboratory environment, adhering to safety protocols and regulations. Qualifications: Organic chemistry wet laboratory experience. Strong attention to detail and ability to work with precision. Excellent organizational and time management skills. Good communication and teamwork abilities. Commitment to maintaining a clean and organized work space. Working Conditions: Full-time position, Monday to Friday, with occasional overtime as needed. Hours are flexible and self motivation and autonomy are required. Primarily laboratory-based work with some exposure to manufacturing areas. Use of personal protective equipment (PPE) as required. Remedy Labs is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Compensation: $20.00 - $50.00 per hour Our MissionEmpowering Entrepreneurs with the Future of Rare Cannabinoids. We are a science company dedicated to providing the next generation of cannabis-based innovations. The study and manufacturing of cannabis compounds demands precision. In collaboration with industry-leading scientists and research partners from around the world, we develop the highest quality cannabinoids for cultivators, extractors, agencies, brands & manufacturers at every point along the supply chain. Our Vision Polygon is redefining the future of rare cannabinoid ingredient brands through innovations and a tireless dedication to quality. Built on the promise of these powerful natural ingredients, coupled with the most advanced science and technology, we define the highest benchmark the industry has to offer. Why Polygon?Polygon stands at the intersection of the finest organic Hemp farms and game-changing product innovators. Our R&D process combines world-class science with deep market knowledge to find first in class product-market fits; light years ahead of the competition. Yes, science is at the heart of what we do, but our greatest skill is finding excellence - the best growers, processors, researchers, and strategic partners to realize the potential of this ancient plant - turning it into one of the most valuable products in the world.

About Us: Remedy Labs is a leading hemp manufacturing company dedicated to delivering high-quality products. We are seeking a detail-oriented and motivated scientist to join our team and support our research and manufacturing processes. Job Description: At Remedy Labs, you will play a crucial role in ensuring the quality and consistency of our existing products, developing new molecules, and improving yields. You will be responsible for conducting experiments, analyzing samples, and maintaining accurate records to support our operations. This position requires experimental organic chemistry experience, strong attention to detail, analytical skills, and a commitment to maintaining high standards OR exceptional intelligence and desire to learn. Highly qualified applicants (process chemistry experience and/or advanced degrees) will be considered for roles with more responsibility and should indicate their qualifications in bold text at the top of their resume. If you have a non-traditional background that you believe would translate to success in a chemistry lab please surface your story in large bold font at the top of the resume you attach to this application. Key Responsibilities: Execute experiments in an organic chemistry lab. Operate and maintain laboratory/ industrial laboratory equipment, including calibration and troubleshooting. Conduct quality control checks and assist in identifying areas for improvement in the manufacturing process. Collaborate with production and quality assurance teams to address any issues related to product quality. Maintain a clean and organized laboratory environment, adhering to safety protocols and regulations. Qualifications: Organic chemistry wet laboratory experience. Strong attention to detail and ability to work with precision. Excellent organizational and time management skills. Good communication and teamwork abilities. Commitment to maintaining a clean and organized work space. Working Conditions: Full-time position, Monday to Friday, with occasional overtime as needed. Hours are flexible and self motivation and autonomy are required. Primarily laboratory-based work with some exposure to manufacturing areas. Use of personal protective equipment (PPE) as required. Remedy Labs is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

What makes us strong? Our employees in 50 countries worldwide - all working with passion to enable high-tech applications with our strong metals: tungsten and molybdenum. At our Plansee site in Franklin, USA, we specialize in transforming semi-finished molybdenum and tungsten products into complex components-leveraging decades of precision manufacturing and engineering excellence. Join a highly motivated team in Franklin, USA, where local expertise meets the global knowledge and values of the Plansee Group. Position type: Hourly RESPONSIBILITIES Perform first piece, in-process and finished machined part inspections including first article inspection for conformance to quality assurance standards. Accurately completes all quality control documentation such as non-conforming material, travelers and control charts. Create and store electronic inspection reports using customer drawings and specifications. Follows verbal and/or written instructions such as blueprints, traveler, work instruction, process specifications, and sketches, in completing a variety of inspection tasks. Verify that inspection equipment, machinery and tools used are calibrated per Company standards. QUALIFICATIONS High School diploma or GED. Technical school education in manufacturing technology and/or ASQ certified inspector a plus. Strong knowledge of GD&T and ability to read and interpret machining and fabrication drawings. Proficiency in the use of the MS Windows (Word, Excel, Outlook) and MRP systems. Strong attention to detail and advanced shop math skills. Ability to calculate trigonometry formulas a plus. Knowledge of running and programming Zeiss Calypso CMM software a plus. Understanding of aerospace requirements (AS9100, AS9102, ASTM's) preferable. Meet the requirements under ITAR - U.S. Citizen or Permanent Resident (Green Card holder). BENEFITS Medical - 90% paid for with 100% reimbursement on deductible Dental Vision Flexible spending accounts Company paid life and disability insurance 401 K w/ company match Time off Benefits Pay range: $25-$29 per hour + bonus plan And much more! Equal Employment Opportunity We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class. Recruitment Team | *********************** Plansee USA LLC

is for a fast-paced production environment. involves physical testing of tile products and analytical testing of raw materials. The ideal candidate can learn the SOPs and can operate with minimal supervision. Typical hours are defined on a shift basis. However, overtime and schedule changes may be required as work must sync with production schedules and available staffing. Initial training would be on the day shift. The position reports to the Quality Supervisor. Requirements: Adhere to all safety rules and report any circumstances that are unsafe or that could lead to an unsafe condition. Clearly communicate any time off (paid or unpaid) to Supervisor. Responsible for being prompt and adhering to designated work hours and breaks. Able to lift 60 lbs. Experience with Microsoft Office is strongly preferred. Mathematics: addition, subtraction, & division. Ability to compose emails and attach files from PC. Good color vision. Ability to read spec sheets, measure products, and detect changes in critical values. Strictly follow SOPs and Testing Methods. Ask questions when unsure about the task. Clear and proactive communication with other team members. Actions based on data. Previous experience in QA/QC is a plus. Must be able to work night shift.

At Trane TechnologiesTM (********************************** and through our businesses including Trane (********************** and Thermo King (*************************** , we create innovative climate solutions for buildings, homes, and transportation that challenge what's possible for a sustainable world. We're a team that dares to look at the world's challenges and see impactful possibilities. We believe in a better future when we uplift others and enable our people to thrive at work and at home. We boldly go **What's in it for you:** ** ** **Be a part of our mission!** A sustainable future demands ongoing digital advancement. Our digital solutions team leads the way in developing next-generation climate technology focused on reducing demand-side energy consumption and emissions. Across our brands-including BrainBox AI, Nuvolo, Thermo King, Trane, and more-our teams combine deep technical expertise with advanced analytics to create data-driven solutions that add real value for customers, communities, and the planet. We invest in tomorrow's possibilities-and in our people-by providing ongoing learning, mentorship, and opportunities to work with industry-leading technology. Whether you're advancing AI in HVAC or driving analytics for greater efficiency, your ideas will help engineer solutions for stronger communities and a sustainable world. **Job Summary** **：** This position is located in Clarksville, TN, and requires year-round availability, with part-time hours during the school year and full-time hours over the summer. Therefore, applicants must currently reside in the Clarksville area in order to be considered. Work under the direction of a software test engineer to perform assigned test development and verification testing on HVAC electronic controls products. **Where is the work:** + Clarksville, TN + On-Site; part-time throughout the week (2-3 days) **What you will do:** + Write test procedures and/or automated test scripts based on written functional specifications as directed by the test engineer. + Review test procedures and/or automated test scripts for completeness and correctness based on comparison to functional specifications and test cases. + Debug automated test scripts and evaluate results to determine the source of anomalous results. + Execute test procedures and test scripts as part of formal acceptance test cycles and evaluate results. + Analyze the results of test procedures and test scripts. + Write up test results in the form of change requests to be acted upon by software developers. + Verify fixes to validate final product. **What you will bring:** + Be a U.S. citizen or have the legal right to work in the U.S. without requiring sponsorship now or in the future. + Must be enrolled in a bachelor or master's of science degree program. EE, EE Technology, Mechanical, Computer science or computer engineering degree program is desired. + Familiarity/experience with software test analysis and development desired. + Familiarity/experience with test automation tools desired. + Familiarity/experience with software development desired. + Ability to use Microsoft Word, Access and Excel. **Compensation:** ** ** Base Pay Range: $22.50/hr - 25.50/hr Disclaimer: This base pay range is based on US national averages. Actual base pay could be a result of seniority, merit, and geographic location where the work is performed. _This role has been designated by the Company as Safety Sensitive._ **Equal Employment Opportunity:** We offer competitive compensation and comprehensive benefits and programs. We are an equal opportunity employer; all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, marital status, disability, status as a protected veteran, or any legally protected status.

Job Title: Quality Control Chemist About the Company: IPS Corporation is a global, market-leading provider of solvent cements, adhesives, and specialized plumbing products. Founded in 1954 in Los Angeles, CA, IPS began by producing clear cements for laminating acrylic sheets for aircraft canopies. Today, IPS, with its three operating companies, has eight manufacturing plants and nine distribution centers supporting sales to a diverse set of end markets in 85 countries. About Weld-On: Weld-On Adhesives, the largest subsidiary of IPS Corporation, is the pioneer and leading manufacturer of Weld-On solvent cements, primers, and cleaners for PVC, CPVC, ABS and other plastic piping systems. Weld-On products are globally recognized as the premium products for joining plastic pipes and fittings and are used by professional installers around the world in a variety of applications such as, but not limited to, construction (residential & commercial), industrial (chemical process, water treatment, mining, etc.), irrigation (landscaping & agricultural) and others. About the Job: We are seeking a Quality Control (QC) Chemist to join our team at the Weld-On Adhesives manufacturing facility in Hartsville, TN. Reporting directly to the Quality Manager, this role plays a critical part in ensuring that all products meet the highest quality standards through rigorous analytical testing and inspection. The QC Chemist will also collaborate with cross-functional teams to support new product introductions, validation processes, and compliance with certification requirements Responsibilities: * Perform quality assurance testing using Gas chromatography, Infrared spectroscopy, viscometers, moisture analyzers, and other analytical techniques to verify product conformance with specifications. * Maintain and calibrate laboratory equipment to ensure accuracy, reliability, and compliance with standards. * Develop, write, and implement Standard Operating Procedures (SOPs) for laboratory processes and equipment usage. * Accurately record and document QC test results, deviations, and corrective actions in compliance with internal protocols and customer requirements. * Conduct lab experiments to support new formula introduction, validation, and troubleshooting of quality issues. * Assist with product certification and compliance activities, including audits, testing, and sample submissions. Education/ Experience Qualifications: * Bachelor's degree in Chemistry, Polymer Science, Materials Science, or a related field. * Minimum of 3 years of relevant experience in the chemical industry, preferably in adhesives, sealants, or coatings. * Strong technical expertise in chemical formulation, quality control, and analytical testing. * Familiarity with regulatory requirements and standards related to hazardous chemicals. * Proficiency in data analysis, with the ability to identify trends and draw valid conclusions; experience with statistical tools is a plus. * Excellent written and verbal communication skills, with the ability to collaborate effectively across all organizational levels and with external partners. * Comfortable working in a global, multi-disciplinary team environment. * Willingness to travel up to 25%. This description reflects management's assignment of essential functions; it does not proscribe or restrict the tasks that may be assigned. Weld On is an equal opportunity employer and makes employment decisions without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability status, or any other status protected by law.

Full-time Description This position plays a critical role in ensuring the highest standards of quality and reliability for the Company's customers. You will serve as the primary liaison between service locations (typically automotive OEMs) and their suppliers, driving continuous improvement initiatives and resolving quality-related issues in a timely and effective manner. This role requires strong technical expertise, exceptional communication skills, and a proactive approach to problem-solving. Essential Duties & Responsibilities: Develop and maintain strong relationships with supplier and service location personnel, serving as the main point of contact for quality-related matters. onduct regular audits and assessments of supplier parts at the service location to ensure compliance with quality standards, specification, and material flow. Collaborate with cross-functional teams to establish and implement supplier quality performance objectives. Recommend initiatives, including process improvements and corrective action plans, to drive product quality, reliability, and cost reductions. Rapidly identify, isolate, communicate and resolve quality issues. Conduct root cause analysis of customer quality issues. Understand service location processes and its effect on customers' parts. Provide technical support and guidance to customers and service location staff, assisting them in resolving quality-related challenges and implementing best practices. Stay abreast of industry trends, regulatory requirements, and technological advancements in manufacturing and quality assurance. Communicate effectively with customer and service location team members, including engineering, quality, logistics, procurement, and production teams, to ensure alignment on quality objectives and expectations. Identify leads and generate new business opportunities for the Company. Document and update notes, audits, issues, contacts, parts, and supplier information in software systems. Understand and leverage quality management systems and tools, including ISO, TS 16949, and AIAG Core Tools (APQP, PPAP, FMEA, SPC, MSA). Promote proper work ethic and demonstrate the Company's Core Values, policies, procedures and best practices. Comply with all customer and service location requirements, including, but not limited to, health/safety training and vaccination status. Demonstrate proficiency using technology, including, but not limited to, smart phones, tablets, computers, mobile applications, web-based software, typing, data entry, spreadsheets, and the use of video conferencing systems. Demonstrate the ability to use written and verbal communication skills to deal effectively with diverse groups of people, including proficiency in using a telephone/cellphone. Demonstrate the ability to maintain a close working relationship with Company team members, customers, service locations, and the general public for the purpose of explanation, interpretation, technical assistance, and non-routine problem-solving. Demonstrate a proven track record of driving supplier quality improvements and cost reductions. Demonstrate excellent problem-solving skills, with the ability to analyze complex issues and implement effective solutions. Demonstrate outstanding communication and interpersonal skills, with the ability to build rapport and influence stakeholders at all levels, inside and outside the Company. Demonstrate solid project and time management capabilities, including the ability to organize, prioritize, and manage multiple projects and tasks simultaneously. Demonstrate proficiency in quality analysis tools and methodologies, such as Six Sigma and Lean Manufacturing. Demonstrate proficiency in using measurement gauges (calipers, micrometers, feeler gauges, etc.). Travel to Company facilities, customer locations, or alternate service locations as assigned. Must be able to drive on behalf of the Company and/or customers if required. Occasional participation in events outside of regular hours may be necessary, which may include meetings, training sessions, and team building events. Maintains flexibility to work additional hours as needed during busy periods or to meet deadlines. Ability to adapt to changing work demands and schedules, including occasional mandatory overtime. Mandatory overtime may be required, with compensation provided in accordance with Company policies and local labor laws. Other duties as assigned. Requirements Physical Requirements & Working Conditions: Ability to stand and walk for extended periods of time (2/3 or more of the workday), and perform tasks that require bending, stooping, kneeling, or crouching. Ability to work with and around others for extended periods of time (2/3 or more of the workday). Ability to occasionally lift and carry objects weighing up to 50 pounds repeatedly throughout the day. Dexterity of hands and fingers to operate smartphones, keyboards, hand tools, and measurement devices. Keen eyesight to read small print/text/figures and to identify quality defects (including in low-light situations). Comfortable working in environments with varying temperatures and noise levels. Employment for this position is contingent on the individual obtaining and maintaining all Company, customer, and service location requirements (including vaccination status), which may be subject to change at any time. Education, Experience, Qualifications: Required High school diploma or GED Must be and remain eligible to be issued a passport for any required international travel/training Valid driver's license Preferred Bachelor's degree in engineering or a manufacturing-related field Experience in automotive manufacturing or supplier quality assurance ________________________________________ The statements listed above are intended to describe the general nature and level of work performed by the individual filling this position and is subject to change. This is not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel. All personnel may be required to perform duties outside of their typical responsibilities from time to time, as assigned by management. The Company reserves the right to modify, interpret, or apply this as appropriate in its business judgment. This job description itself is not a contract of employment, implied or otherwise. Salary Description $25.00 Hourly

The QC Tech provides data collection and reporting for all manufacturing assembly operations. Associates must accurately record and report this data to operations and provide corrective and containment assistance to the manufacturing team. Note that this role includes a sign on $500 bonus at the completion of 120 Days. Essential Functions: This position is responsible for supporting manufacturing operations Collect accurate inspection data and be able to report these findings to operational personnel Maintain a safety and customer service mindset at all times Assure that analytical equipment is in good working order and that inspections and maintenance activities are executed on schedule Manage QC audit routes and complete requirements by their scheduled completion Identify, correct, and document discrepancies Notify customer with concerns and work collectively with manufacturing and technical personnel to resolve issues Document and report non-conformances and identify equipment trends Serve as a back-up for other QC Techs Maintain a safe and clean work environment Meet or exceed all site contractor requirements, including random drug screening, safety practices, ethical conduct, and any other appropriate requirements Effectively communicate with management, maintenance, and other employees in a timely manner when quality activities dictate action Develop proficiency to train and coach others May perform other duties as assigned by the Supervisor or Site Manager Minimum Requirements / Qualifications: High School degree or equivalent Fluency in English (written and spoken) required High speed manufacturing machine experience preferred Electrical, Mechanical, or QC/QA background preferred Must demonstrate excellent customer service Must demonstrate self motivation, initiative, honesty, integrity, and attention to detail Ability to identify best practices and bring innovation to the work environment Must be able to learn basic electrical and mechanical concepts Must be able to work overtime, weekends, and holidays as assigned Core Competencies: Commitment to Excellence - Check your work Customer Relationship Management - communicate with customers to deliver better service Methodical Approach - troubleshooting Team Building Physical Demands of the Position: Works in close proximity to manufacturing equipment Walks 2 - 4 miles in an 8 hour shift Stands greater than four hours at a time Stoops and bends below knee level 8 - 10 times an hour Lifts and carries less than 50 pounds but greater than 25 pounds repetitively Pushes / pulls objects greater than 25 pounds Reaches out Reaches overhead Repetitively uses feet Repetitively uses hands Grips with hands

Contour Airlines is a long-established aviation services company with a diverse range of capabilities. At Contour Airlines, our core values guide every action and decision. We are unwavering in our commitment to integrity and safety, which remain at the heart of all our business lines. Our team members exemplify an attitude of excellence, consistently striving to think like a customer. We believe there is strength in unity, and we work together as a team to achieve ambitious goals. Full-Time Employee Benefits & Compensation Overview As a full-time employee of Contour Airlines, you are eligible for the following benefits and programs: Group Insurance Plans Health, Vision, and Dental Coverage-Effective the first day of the month following your hire date. Additional voluntary benefits include short-term/long-term disability and life insurance policies. Eligibility begins the first day of the month following your hire date. 401(k) Savings Plan Eligibility begins the first day of the month following your hire date. The Company offers a matching contribution up to 6% of your eligible compensation. Enrollment guidelines and a 401(k) Enrollment Guide will be provided during onboarding. Paid Sick Leave Accrual of up to 56 hours of paid sick leave per year. Unused sick leave rolls over annually until your sick bank reaches 480 hours. Vested Vacation Hours Eligible to receive vacation hours on January 1st following your hire date. These hours will be vested and available for use in accordance with Company policies. Non-Revenue/Space Available (NRSA) Travel Privileges NRSA (non-revenue/space available) travel privileges on Contour Airlines upon hire and access to MyID Travel after 6 months of service Leaves of Absence Eligible for various types of leave, including: Medical Leave Non-Medical Family Care Leave Maternity and Paternity Leave Personal Leave Detailed leave policies are outlined in the Contour Airlines Employee Handbook, which will be provided during onboarding. Compensation Details Pay Rate: starting hourly rate is between $27.00 and $37.00 per hour based on your prior work experience. You will also receive an additional $1.00 override for working the nightshift. Step Pay Increases: Eligible for a $1.00 increase each year on your pay anniversary date, up to a maximum rate of $42.00 per hour. Retention Bonus: After reaching the top of the pay scale, eligible for an annual retention bonus of up to $2,000.00 based on performance. Overtime Pay: Hours worked in excess of 40 per week will be paid at 1.5 times your hourly rate. Holiday Pay: Work performed on Contour Airlines' observed holidays will be compensated at 2 times your hourly rate. A list of Company-recognized holidays is outlined in the Employee Handbook. Equal Employment Opportunity Contour Airlines is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, citizenship, color, creed, sex, national origin, race, religion, sexual orientation, political affiliation, marital status, pregnancy, pre-disposing genetic characteristics, veteran status, military status, disability, gender identity or expression, familial status, criminal history, status as a victim of domestic violence, or any other protected status. Accommodations Contour Airlines is committed to providing reasonable accommodations to applicants and employees. If you require accommodations during the application or onboarding process, please contact Human Resources at *****************. Join Our Growing Team Contour Airlines' rapid growth has created exciting career opportunities. We invite you to become part of our family and contribute to our ongoing success. Position Summary The Quality Control - Aircraft Inspector is responsible for ensuring all aircraft maintenance, inspections, repairs, and documentation are carried out in strict compliance with FAA regulations, manufacturer's specifications, customer requirements, and Company standards. This role is critical to maintaining the highest levels of airworthiness, safety, and operational reliability. Essential Duties & Responsibilities Perform incoming, in-progress, and final inspections of aircraft, components, and articles maintained by the Company. Monitor workmanship and materials to ensure compliance with FAA regulations, manufacturer guidelines, and Company procedures. Verify that all required maintenance and inspection documentation is completed accurately and in compliance with regulations. Oversee proper use of tools, equipment, and safety procedures, ensuring compliance with OSHA, EPA, and other regulatory requirements. Confirm that all maintenance work meets FAA, customer, Company, and manufacturer standards of quality. Complete inspection records in accordance with the Repair Station Manual / Quality Control Manual and applicable customer guidelines. Conduct surveillance of maintenance practices, storage areas, shops, and housekeeping standards, initiating corrective actions as required. Provide constructive feedback to improve efficiency, productivity, quality, and safety. Assist Crew Chiefs and Supervisors in determining the scope of required repairs. Perform weight and balance procedures. Release aircraft or components back into service following approved inspections. Participate in special projects or other duties as assigned by leadership. Qualifications Minimum 23 years of age. Valid driver's license with a good driving record. FAA Airframe and Powerplant (A&P) Certificate required. Part 65 Certification and minimum 2 years of aviation experience. 18-months minimum experience with Embraer Regional Jet 135/145 (ERJ) and/or Bombardier CRJ200 (CRJ) required. High school diploma or GED required; advanced training preferred. Must be legally authorized to work in the U.S. and able to travel internationally. Able to pass a 10-year work history review, criminal background check, and DOT pre-employment drug screening. Must submit to and pass FAA- and Company-mandated random drug and alcohol testing. Proficiency in English (reading, writing, speaking); Spanish proficiency is a plus. Must be familiar with FAR Part 135 and Part 145 operations, inspection methods, techniques, and tools. Must be proficient with inspection equipment and visual aids appropriate to the task. Completion of Quality Inspection training required. Knowledge, Skills & Abilities Strong knowledge of FAA regulations, maintenance procedures, and safety standards. Ability to work in a fast-paced environment with shifting priorities. Strong organizational skills with attention to detail. Excellent written and verbal communication skills delivered with professionalism. Ability to work independently and as part of a team. Strong interpersonal skills with the ability to interact with diverse personalities. Demonstrated ability to lead, mentor, and support others. Ability to manage multiple complex projects simultaneously. Self-motivated with a commitment to excellence and continuous improvement. Work Schedule & Environment Nightshift position: 4:00 PM - 2:30 AM, including weekends and holidays. Must be able to work flexible hours as operational needs require. Work is performed in a hangar and ramp environment with exposure to noise, weather, and aircraft operations. Must be able to work in a safe, professional manner while adhering to all regulatory requirements, including OSHA, EPA, state, and federal guidelines. Disclaimer: The above statements are intended only to describe the general nature and level of work required of the referenced position; they are not intended to be an exhaustive list of all responsibilities, duties, and skills required of individuals in the position. Please be advised that the duties and expectations of this position may be subject to change.

What Quality Control contributes to Cardinal Health Quality develops and implements quality policies, procedures, and processes to ensure products and services comply with regulatory standards and specifications. Quality Control is responsible for the analysis or inspection of materials, components, products or processes for compliance with specifications and standards. Responsibilities Perform visual and functional inspections of incoming, in-process, and finished products/components/packaging to ensure conformance to all specifications, drawings, and Quality standards. Make initial decisions on whether a process or product is in conformance. Audit and monitor quality requirements in accordance with the company Quality Assurance policies and Customer specifications. Document and report inspection findings and results and monitor corrective actions to inspection findings. Complete required Good Manufacturing Practices (GMP), issue resolution, and task-specific training. Follow GMP including documentation practices and proper gowning techniques. Observes and guides sanitary practice compliance in the facility. Examine and interpret trends in data collected from production. Assist with enabling the organization to meet and exceed Customer expectations for Quality Assurance. Recommend measures for continuous improvement of production methods, equipment performance, and Quality. In partnership with plant operation's management, assist with processes to drive on-going continuous improvement of customer satisfaction and compliance. Work with a wide variety of gauges, instruments, and inspection devices. Perform other miscellaneous duties as assigned by management. Availability to work 1st, or 2nd shift depending on business needs. Schedule: Monday through Thursday from 11:00am - 9:30pm with the possibility for overtime and some weekends. OR Monday through Thursday from 3:30pm - 2:00am with the possibility for overtime and some weekends. Location: Onsite in La Vergne, TN Qualifications 2-4 years of experience, preferred High School diploma, GED or equivalent, or equivalent work experience, preferred What is expected of you and others at this level Applies knowledge and company policies to complete a variety of tasks Demonstrates a working knowledge of jobs outside area of responsibility Maintains appropriate licenses, training and certifications Works on assignments that are moderately difficult requiring judgment in resolving issues May assist in recommendation of processes on new assignments Adheres to all quality guidelines Works with limited supervision Work occasionally involves review of output by work lead or supervisor May provide general guidance or technical assistance to less experienced team members Anticipated hourly range: $22.50 per hour - $27.10 per hour Bonus eligible: No Benefits: Cardinal Health offers a wide variety of benefits and programs to support health and well-being. Medical, dental and vision coverage Paid time off plan Health savings account (HSA) 401k savings plan Access to wages before pay day with my FlexPay Flexible spending accounts (FSAs) Short- and long-term disability coverage Work-Life resources Paid parental leave Healthy lifestyle programs Application window anticipated to close: 1/20/2026 *if interested in opportunity, please submit application as soon as possible. The salary range listed is an estimate. Pay at Cardinal Health is determined by multiple factors including, but not limited to, a candidate's geographical location, relevant education, experience and skills and an evaluation of internal pay equity. Candidates who are back-to-work, people with disabilities, without a college degree, and Veterans are encouraged to apply. Cardinal Health supports an inclusive workplace that values diversity of thought, experience and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. Cardinal Health is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law. To read and review this privacy notice click here

Job Title: Quality Lab Technician Department: Quality Control Employment Type: Full-time, Non-Exempt Performs inspection of in-process and incoming samples according to company specifications and follow Standard Operating Procedures. Operates instruments independently. Works with Quality Control and Manufacturing team to ensure product compliance with company standards. Responsibilities and Duties: Examine, inspect, measure and test raw materials, in-process and finished products to verify conformance to specifications Perform routine calibration and maintenance on analytical equipment Maintain quality control records and other documents in order to comply with company regulations and policy Read orders and schedules to determine work sequences and installation procedures for equipment set up. Prepare chemical mixes while following Personal Protective Equipment (PPE) procedures Occasionally required to lift and/or move objects up to 50 pounds Additional duties as assigned by management Qualifications and Skills: Computer skills (MS Excel, Word, Outlook) and ability to learn other programs Lab equipment and handling skills Must have attention to details for all areas of work Logical reasoning to identify problems as well as strengths and weaknesses of alternative solutions, conclusions or approaches to problems Must maintain the highest ethical standards in the conduct of company affairs, must conduct business with integrity and comply with all applicable laws in a manner that excludes considerations of personal advantage or gain Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. This position works in a manufacturing setting. This role routinely uses standard warehouse equipment such as hand trucks, box cutters and tape dispensers. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee may be exposed to vibration. The employee is occasionally exposed to fumes or airborne particles and/or outside weather conditions. The noise level in the work environment may be loud. This position may work with hazardous materials where personal protective equipment (PPE) is necessary and specific procedures must be followed to adhere to safety regulations. Physical Demands: Must be able to use hands to handle or feel; reach with hands and arms; and talk or hear. Must be able to stand; walk; and stoop, kneel, crouch or crawl. Occasionally required to sit and climb or balance. Must regularly lift and/or move objects up to 25 pounds and frequently lift and/or move objects up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Must be able to wear all required PPE while in production area Must be able to pass Physical Exam Must be able to pass a (PFT) Pulmonary Function Test for respirator wear Education & Experience: High School Diploma or equivalent 3+ years of experience in manufacturing facility At least 1 year of experience working in laboratory environment Required Competencies: Detailed Quality Control Excellent Time Management Strong Mathematical Skills Experience using instruments such as gages, spectrometers Travel: No travel required Hankook & Company is an equal opportunity employer. We value our colleagues' unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential. As an equal employment opportunity employer, Hankook & Company is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship. All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. This job description will be reviewed periodically as duties and responsibilities change with business necessity. All job functions are subject to modification.

Job Title: Quality Lab Technician Department: Quality Control Employment Type: Full-time, Non-Exempt Performs inspection of in-process and incoming samples according to company specifications and follow Standard Operating Procedures. Operates instruments independently. Works with Quality Control and Manufacturing team to ensure product compliance with company standards. Responsibilities and Duties: Examine, inspect, measure and test raw materials, in-process and finished products to verify conformance to specifications Perform routine calibration and maintenance on analytical equipment Maintain quality control records and other documents in order to comply with company regulations and policy Read orders and schedules to determine work sequences and installation procedures for equipment set up. Prepare chemical mixes while following Personal Protective Equipment (PPE) procedures Occasionally required to lift and/or move objects up to 50 pounds Additional duties as assigned by management Qualifications and Skills: Computer skills (MS Excel, Word, Outlook) and ability to learn other programs Lab equipment and handling skills Must have attention to details for all areas of work Logical reasoning to identify problems as well as strengths and weaknesses of alternative solutions, conclusions or approaches to problems Must maintain the highest ethical standards in the conduct of company affairs, must conduct business with integrity and comply with all applicable laws in a manner that excludes considerations of personal advantage or gain Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. This position works in a manufacturing setting. This role routinely uses standard warehouse equipment such as hand trucks, box cutters and tape dispensers. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee may be exposed to vibration. The employee is occasionally exposed to fumes or airborne particles and/or outside weather conditions. The noise level in the work environment may be loud. This position may work with hazardous materials where personal protective equipment (PPE) is necessary and specific procedures must be followed to adhere to safety regulations. Physical Demands: Must be able to use hands to handle or feel; reach with hands and arms; and talk or hear. Must be able to stand; walk; and stoop, kneel, crouch or crawl. Occasionally required to sit and climb or balance. Must regularly lift and/or move objects up to 25 pounds and frequently lift and/or move objects up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Must be able to wear all required PPE while in production area Must be able to pass Physical Exam Must be able to pass a (PFT) Pulmonary Function Test for respirator wear Education & Experience: High School Diploma or equivalent 3+ years of experience in manufacturing facility At least 1 year of experience working in laboratory environment Required Competencies: Detailed Quality Control Excellent Time Management Strong Mathematical Skills Experience using instruments such as gages, spectrometers Travel: No travel required Hankook & Company is an equal opportunity employer. We value our colleagues' unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential. As an equal employment opportunity employer, Hankook & Company is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship. All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. This job description will be reviewed periodically as duties and responsibilities change with business necessity. All job functions are subject to modification.

The QC Tech provides data collection and reporting for all manufacturing assembly operations. Associates must accurately record and report this data to operations and provide corrective and containment assistance to the manufacturing team. Note that this role includes a sign on $500 bonus at the completion of 120 Days. Essential Functions: This position is responsible for supporting manufacturing operations * Collect accurate inspection data and be able to report these findings to operational personnel * Maintain a safety and customer service mindset at all times * Assure that analytical equipment is in good working order and that inspections and maintenance activities are executed on schedule * Manage QC audit routes and complete requirements by their scheduled completion * Identify, correct, and document discrepancies * Notify customer with concerns and work collectively with manufacturing and technical personnel to resolve issues * Document and report non-conformances and identify equipment trends * Serve as a back-up for other QC Techs * Maintain a safe and clean work environment * Meet or exceed all site contractor requirements, including random drug screening, safety practices, ethical conduct, and any other appropriate requirements * Effectively communicate with management, maintenance, and other employees in a timely manner when quality activities dictate action * Develop proficiency to train and coach others * May perform other duties as assigned by the Supervisor or Site Manager Minimum Requirements / Qualifications: * High School degree or equivalent * High speed manufacturing machine experience preferred * Electrical, Mechanical, or QC/QA background preferred * Must demonstrate excellent customer service * Must demonstrate self motivation, initiative, honesty, integrity, and attention to detail * Ability to identify best practices and bring innovation to the work environment * Must be able to learn basic electrical and mechanical concepts * Must be able to work overtime, weekends, and holidays as assigned Core Competencies: * Commitment to Excellence - Check your work * Customer Relationship Management - communicate with customers to deliver better service * Methodical Approach - troubleshooting * Team Building Physical Demands of the Position: * Works in close proximity to manufacturing equipment * Walks 2 - 4 miles in an 8 hour shift * Stands greater than four hours at a time * Stoops and bends below knee level 8 - 10 times an hour * Lifts and carries less than 50 pounds but greater than 25 pounds repetitively * Pushes / pulls objects greater than 25 pounds * Reaches out * Reaches overhead * Repetitively uses feet * Repetitively uses hands * Grips with hands

Job Description Propper International is the leading manufacturer of high-quality tactical gear and apparel for Military, Law Enforcement, Fire, EMS, Security and Corrections since 1967. For the past 55 years, we've supplied over 120 million garments to the U.S. Department of Defense - more than any other manufacturer - and have built a commercial brand of product for law enforcement agencies and the greater public safety community. Our Dickson, Tennessee Distribution Center is looking for a motivated, detailed oriented Quality Control Inspector to preserve the integrity of our products and keep the Propper Brand associated with quality and consistency. This position is scheduled Monday through Friday, 8am to 4:30pm. JOB FUNCTION: Check the quality of incoming and outgoing products, as well as ensure that the merchandise is within the company's specifications and standards. This job involves tasks such as performing inspections of clothing and footwear, running quality tests, and keeping records of defects. RESPONSIBILITIES / DUTIES: Follow audit procedures for incoming audits and outgoing audits. Record and report all findings. Ability to complete related forms legibly. Ability to understand and interpret basic arithmetic. Reject items that does not meet company standards. Re-audit lots if necessary Ability to lift up to 50 lbs Any other assigned tasks. EDUCATION / KNOWLEDGE / EXPERIENCE: High School Diploma or GED, required. Experience with Microsoft office required. 2 years college or experience preferred. Background in textile quality control preferred (Willing to train) Color distinction and color validation experience a plus. (Willing to train) Experience using a standard tape measure. Self-motivated Team player Self-starter Propper is an Equal Opportunity Employer

Contour Airlines is a long-established aviation services company with a diverse range of capabilities. At Contour Airlines, our core values guide every action and decision. We are unwavering in our commitment to integrity and safety, which remain at the heart of all our business lines. Our team members exemplify an attitude of excellence, consistently striving to think like a customer. We believe there is strength in unity, and we work together as a team to achieve ambitious goals. Full-Time Employee Benefits & Compensation Overview As a full-time employee of Contour Airlines, you are eligible for the following benefits and programs: Group Insurance Plans * Health, Vision, and Dental Coverage-Effective the first day of the month following your hire date. Additional voluntary benefits include short-term/long-term disability and life insurance policies. * Eligibility begins the first day of the month following your hire date. 401(k) Savings Plan * Eligibility begins the first day of the month following your hire date. * The Company offers a matching contribution up to 6% of your eligible compensation. * Enrollment guidelines and a 401(k) Enrollment Guide will be provided during onboarding. Paid Sick Leave * Accrual of up to 56 hours of paid sick leave per year. * Unused sick leave rolls over annually until your sick bank reaches 480 hours. Vested Vacation Hours * Eligible to receive vacation hours on January 1st following your hire date. * These hours will be vested and available for use in accordance with Company policies. Non-Revenue/Space Available (NRSA) Travel Privileges * NRSA (non-revenue/space available) travel privileges on Contour Airlines upon hire and access to MyID Travel after 6 months of service Leaves of Absence * Eligible for various types of leave, including: * Medical Leave * Non-Medical Family Care Leave * Maternity and Paternity Leave * Personal Leave * Detailed leave policies are outlined in the Contour Airlines Employee Handbook, which will be provided during onboarding. Compensation Details * Pay Rate: starting hourly rate is between $27.00 and $37.00 per hour based on your prior work experience. You will also receive an additional $1.00 override for working the nightshift. * Step Pay Increases: Eligible for a $1.00 increase each year on your pay anniversary date, up to a maximum rate of $42.00 per hour. * Retention Bonus: After reaching the top of the pay scale, eligible for an annual retention bonus of up to $2,000.00 based on performance. * Overtime Pay: Hours worked in excess of 40 per week will be paid at 1.5 times your hourly rate. * Holiday Pay: Work performed on Contour Airlines' observed holidays will be compensated at 2 times your hourly rate. A list of Company-recognized holidays is outlined in the Employee Handbook. Equal Employment Opportunity Contour Airlines is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, citizenship, color, creed, sex, national origin, race, religion, sexual orientation, political affiliation, marital status, pregnancy, pre-disposing genetic characteristics, veteran status, military status, disability, gender identity or expression, familial status, criminal history, status as a victim of domestic violence, or any other protected status. Accommodations Contour Airlines is committed to providing reasonable accommodations to applicants and employees. If you require accommodations during the application or onboarding process, please contact Human Resources at *****************. Join Our Growing Team Contour Airlines' rapid growth has created exciting career opportunities. We invite you to become part of our family and contribute to our ongoing success. Position Summary The Quality Control - Aircraft Inspector is responsible for ensuring all aircraft maintenance, inspections, repairs, and documentation are carried out in strict compliance with FAA regulations, manufacturer's specifications, customer requirements, and Company standards. This role is critical to maintaining the highest levels of airworthiness, safety, and operational reliability. Essential Duties & Responsibilities * Perform incoming, in-progress, and final inspections of aircraft, components, and articles maintained by the Company. * Monitor workmanship and materials to ensure compliance with FAA regulations, manufacturer guidelines, and Company procedures. * Verify that all required maintenance and inspection documentation is completed accurately and in compliance with regulations. * Oversee proper use of tools, equipment, and safety procedures, ensuring compliance with OSHA, EPA, and other regulatory requirements. * Confirm that all maintenance work meets FAA, customer, Company, and manufacturer standards of quality. * Complete inspection records in accordance with the Repair Station Manual / Quality Control Manual and applicable customer guidelines. * Conduct surveillance of maintenance practices, storage areas, shops, and housekeeping standards, initiating corrective actions as required. * Provide constructive feedback to improve efficiency, productivity, quality, and safety. * Assist Crew Chiefs and Supervisors in determining the scope of required repairs. * Perform weight and balance procedures. * Release aircraft or components back into service following approved inspections. * Participate in special projects or other duties as assigned by leadership.