Quality control analyst jobs in Norfolk, VA

Clearance: TS/SCI Position Type: Full-Time AERMOR is seeking a Quality Control Specialist III who will provide professional quality assurance and technical support. This role requires a strong background in engineering or software design/maintenance, quality control practices, and hands-on experience with U.S. Navy Navigation equipment and systems. The Specialist ensures that products, services, and processes meet established quality and safety standards, and plays a critical role in testing, evaluation, and verification efforts. This is not a remote position. Responsibilities: Apply engineering and software design/maintenance skills to solve technical problems. Ensure that products, services, and processes meet quality and safety standards. Perform equipment testing to verify process effectiveness, safety, and compliance. Interpret engineering plans and technical drawings, contributing to the design and fabrication of test specimens. Utilize Computer-Aided Drafting (CAD) tools to prepare shop drawings for model construction. Work with material specifications and fabrication methods to support testing and design processes. Required Experience: At least 5 years of professional experience solving technical problems in engineering and/or software design/maintenance. Practical understanding of engineering concepts. Hands-on testing of equipment to ensure safe and effective operation. Proficiency with CAD software for drafting and design. Familiarity with material specifications and fabrication methods. Hands-on experience with U.S. Navy Navigation equipment and systems. Expertise in at least three (3) of the following four (4) areas: Systems Requirements, Operational Requirements, Test & Evaluation, and Training.

Job Description Join a high-profile federal construction project as a QC Specialist focusing on civil and structural scopes. Your expertise will ensure high-quality construction aligned with contract drawings and NAVFAC specifications. Responsibilities: Perform daily QC inspections on foundations, concrete, steel, decking, etc. Conduct and document all three phases of QC for civil/structural work. Review project plans and identify any discrepancies or non-conformance. Coordinate with testing labs and subcontractors. Qualifications: Graduate Civil or Structural Engineer preferred. 10 years of relevant experience in similar construction environments. Familiar with EM 385-1-1 and USACE/NAVFAC standards.

Job DescriptionLocation: Norfolk, VA Clearance: TS/SCI Position Type: Full-Time AERMOR is seeking a Quality Control Specialist III who will provide professional quality assurance and technical support. This role requires a strong background in engineering or software design/maintenance, quality control practices, and hands-on experience with U.S. Navy Navigation equipment and systems. The Specialist ensures that products, services, and processes meet established quality and safety standards, and plays a critical role in testing, evaluation, and verification efforts. This is not a remote position. Responsibilities: Apply engineering and software design/maintenance skills to solve technical problems. Ensure that products, services, and processes meet quality and safety standards. Perform equipment testing to verify process effectiveness, safety, and compliance. Interpret engineering plans and technical drawings, contributing to the design and fabrication of test specimens. Utilize Computer-Aided Drafting (CAD) tools to prepare shop drawings for model construction. Work with material specifications and fabrication methods to support testing and design processes. Required Experience: At least 5 years of professional experience solving technical problems in engineering and/or software design/maintenance. Practical understanding of engineering concepts. Hands-on testing of equipment to ensure safe and effective operation. Proficiency with CAD software for drafting and design. Familiarity with material specifications and fabrication methods. Hands-on experience with U.S. Navy Navigation equipment and systems. Expertise in at least three (3) of the following four (4) areas: Systems Requirements, Operational Requirements, Test & Evaluation, and Training. Powered by JazzHR EY8CjMblnQ

Job Description Federal Construction Professionals - QCM, Superintendent, PM Use the link below to Apply! https://hiring.elitercservices.com/fcc-2046 Elite Recruiting and Consulting Services, SDVOSB, is building an ongoing pipeline of experienced Federal construction professionals for upcoming NAVFAC, USACE, and Guard projects nationwide. If you have worked on military bases or federal vertical or horizontal projects, we want to connect. We support primes preparing for new phases, new awards, and upcoming mobilizations. Roles We Are Currently looking for Quality Control Manager Construction Superintendent Project Manager Types of Projects Access control facilities Barracks and housing Aircraft hangars HVAC and MEP upgrades Ranges and training facilities Renovations on Air Force, Army, Marine Corps, and Guard installations What Helps You Stand Out NAVFAC or USACE project experience CQM certification EM 385 1 1 OSHA 30 Secret or Top-Secret clearance Ability to travel Strong documentation and coordination skills How to Apply Complete our Federal Construction Candidate Form for fastest review Use the link below to apply! https://hiring.elitercservices.com/fcc-2046 We will reach out as soon as your experience matches an upcoming federal project. Veterans are encouraged to apply.

Leidos Civil Group is seeking a dynamic Material Handler Intern in Chesapeake, VA. The candidate will complete parts packaging in accordance with specialized packaging requirements. Fabrication of shipping labels, ensuring proper format and shipping address accuracy. Coordinate special shipping requirements as necessary. Document and maintain accurate shipping activity files. Provide daily shipping and billing summaries to program administration. Perform periodic inventory of shipping material to ensure adequate quantities on hand. Perform applicable data entry to the existing CDLS automated Logistics Database. Update shipping information to the FAA "Logistics Information System" (LIS) via WEB page. Perform preliminary package inspection for any apparent external damage and notify shipper at time of delivery if damage is detected. Verify and note received packages for shipment type (Purchase Order or Field parts returned for repair. For Purchase Order items, verify the Purchase Order document to the part actually received and then notify ordering individual of the received parts. Update and maintain the department receiving files. Maintain the warehouse physical organization and cleanliness. Support periodic warehouse inventory activities. Interface with management to resolve any problems or discrepancies that may arise with orders. Develop a level of expertise via cross training of coworker functions so as to fill in for position absences. Primary Responsibilities. Inventory Management: Planning, controlling, and optimizing stock of goods to meet customer demand, minimize carrying costs, and maximize operational efficiency. Logistics Management: Strategizing and coordinating the movement of goods and resources to meet customer demands and minimize costs. Logistics Systems: Implementing and managing systems to optimize the flow of goods, information, and resources throughout the supply chain. Materials Management: Controlling the acquisition, storage, and distribution of materials to support production and operations. Process Improvements: Identifying opportunities for improvement and implementing changes to processes to address them. Warehousing Operations: Overseeing the storage, handling, and distribution of goods within a warehouse facility to ensure efficiency and accuracy. Basic Qualifications. Currently pursuing a bachelor's degree from an accredited university. Previous Warehouse Experience. Demonstrated Self-Starter, Operate Fork Lift, General Computer Skills FedEx On-Site Power Ship Exp., Microsoft Access Experience, Knowledge of OSHA Standards, and Inventory Control & Management Specialized training in specific aspects of job functions and/or demonstrated ability to perform assigned tasks. Ability to obtain and maintain a public trust clearance. Preferred Qualifications. Proficiency with computer database systems Proficiency in Microsoft Office products (Word, Excel, PowerPoint, Outlook) At Leidos, we don't want someone who "fits the mold"-we want someone who melts it down and builds something better. This is a role for the restless, the over-caffeinated, the ones who ask, “what's next?” before the dust settles on “what's now.” If you're already scheming step 20 while everyone else is still debating step 2… good. You'll fit right in. Original Posting:October 16, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range:Pay Range $39,000.00 - $70,500.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Quality Control Tech shall have a strong knowledge of all inspection procedures and utilization of required measuring devices that correspond to the tasking in which they are assigned. Perform shipboard/alteration inspections referencing MIL-STD's, NAVSEA Standard Items, and MIL-SPEC's. Provide detailed reports documenting all "As Found" conditions during inspection, including Quality Assurance Workbook. Verify proper documentation of all required repairs and communicate identified deficiencies to production to initiate corrective actions. Ensure that all test and inspection documentation is accounted for and thoroughly completed prior to certification. Must have the ability to read and interpret blueprints, sketches, written technical instructions and manuals to develop Test and Inspection QA Workbooks, incorporating V, I, and G level inspection points to Test and Inspection Plans (TIP). **Specific duties and responsibilities:** + Work directly with QAM, and Project Manager(s) to ensure all inspections requirements are properly identified in the Quality Assurance Workbook. + Thorough knowledge of NAVSEA Standard Items, NAVSEA Technical Specification 9090-310, MIL-STDs and MIL-SPECs to objectively review on board installations and associated Objective Quality Evidence. + Responsible to ensure that the quality of the product or services provided to the customer through the performance and documentation of all required inspections is in accordance with corresponding contractual requirements and company procedures. + Review and certify all data, ensuring that performance and quality of products conform to establish company, international (ISO), and governmental regulatory standards and agency guidelines, and to ensure lasting customer satisfaction. + Candidate must possess C5ISR Installation, Quality Assurance, or Quality Control experience. + Approve finished products by confirming specifications; conducting visual and measurement tests; returning products for re-work; confirming re-work. + Ensure that all QA forms, Test documents and any other form of Objective Quality Evidence (OQE) requiring initials, signatures or any other verifiable form or acknowledgement of completion are done in accordance with all applicable requirements. + Maintain safe and healthy work environment by following standards and procedures, complying with legal regulations. + Candidates must be able to physically access all areas on board U.S. Naval Vessels to include tanks, voids, and working aloft in support of production operations. **Certification** + ISO Lead Auditor Training a plus + Certified Quality Inspector Certification + NAVSEA Connector Certification + NAVSEA Cableway Certification + NAVSEA Fiber Optic QA/Supervisor Training + Structural fit-up, welding, pipefitting, and NDT Level II experience/qualification is a plus. + Active OSHA 7615 Maritime Training 10hr Card + Shipyard Competent Person Responsibilities **Specific duties and responsibilities:** + Work directly with QAM, and Project Manager(s) to ensure all inspections requirements are properly identified in the Quality Assurance Workbook. + Thorough knowledge of NAVSEA Standard Items, NAVSEA Technical Specification 9090-310, MIL-STDs and MIL-SPECs to objectively review on board installations and associated Objective Quality Evidence. + Responsible to ensure that the quality of the product or services provided to the customer through the performance and documentation of all required inspections is in accordance with corresponding contractual requirements and company procedures. + Review and certify all data, ensuring that performance and quality of products conform to establish company, international (ISO), and governmental regulatory standards and agency guidelines, and to ensure lasting customer satisfaction. + Candidate must possess C5ISR Installation, Quality Assurance, or Quality Control experience. + Approve finished products by confirming specifications; conducting visual and measurement tests; returning products for re-work; confirming re-work. + Ensure that all QA forms, Test documents and any other form of Objective Quality Evidence (OQE) requiring initials, signatures or any other verifiable form or acknowledgement of completion are done in accordance with all applicable requirements. + Maintain safe and healthy work environment by following standards and procedures, complying with legal regulations. + Candidates must be able to physically access all areas on board U.S. Naval Vessels to include tanks, voids, and working aloft in support of production operations. Qualifications **Other Required Skills** + Active secret security clearance desirable + Clearance: Applicants selected will be subject to a government security investigation and may meet eligibility requirements, including U.S. Citizenship, for access to classified information; ability to obtain a Secret clearance is required. + Candidate must be able/willing to travel in CONUS/OCONUS + ISO Lead Auditor Training a plus + Fiber Optic Connector QA/Build training + Must be able to successfully pass a criminal background check and obtain and maintain a security badge for all military installations and civilian shipyards. Must have or be able to obtain a passport **Abilities** + Exposure to computer screens for an extended period of time. + Sitting for extended periods of time. + Reach by extending hands or arms in any direction. + Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard. + Listen to and understand information and ideas presented through spoken words and sentences. + Communicate information and ideas in speaking so others will understand. + Read and understand information and ideas presented in writing. + Apply general rules to specific problems to produce answers that make sense. + Identify and understand the speech of another person.

Job Description Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices all over the country. We partner with businesses as well as jobseekers to place individuals into positions efficiently. We are currently in need of QA/QC Inspectors to join our team in Pascagoula, MS, Bremerton, WA and Chesapeake, VA. Pay Range: $24-36/hour Summary Knowledge of QA/QC functions Familiarity with inspection and test procedures Perform QA/QC functions to ensure compliance with industry standards and company requirements Conduct inspections and tests according to established procedures Produce/create electronic/handwritten Quality Assurance documentation as Objective Quality Evidence for work performed throughout the preservation process. Develop and Maintain Test and Inspection Plan (TIP) for all assigned jobs. Monitor and document all required readings with regard to, but not limited to, metal anchor tooth (profile), paint wet/dry film thickness (DFT), steel temperatures and all required environmental readings using appropriate equipment to include: micrometer, dry film thickness gauge, infrared thermometer, psychomotor. Ensure all assigned equipment is maintained in good working order with within all calibration certification intervals. All of the above requirements shall be completed in a safe and efficient manner so as not to cause injury to self or others. Requirements Minimum of 7 years of experience in manufacturing, shipyard, or quality (testing/inspecting) roles Proficiency in MS Office applications Ability to read and interpret codes, specifications, and advanced blueprints 3 years minimum NAVSEA support experience with submarine preservation NACE Inspector and/or SSPC NBPI required. Benefits CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: Health Dental Vision Voluntary Life/Voluntary AD&D Short-Term Disability Long-Term Disability Hospital Indemnity Accident Critical Illness 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

Job Description Responsible for executing quality control/assurance inspection, testing and verification of finished products, work in-process, procured materials and components to assess and verify conformance to requirements and production process capabilities. Facilitate continuous improvement of customer satisfaction and operational performance. Provide support to other departments including, but not limited to Production, Shipping, Service, and Purchasing. Key Areas of Responsibility: Inspect and test vendor supplied materials for conformance to specifications. Inspect and test customer returns. Inspect and test in-process products to assess conformance to specifications. Inspect and test final products to assess conformance to specifications. Record results of all inspection and testing activities accurately. Apply, or assure the application of, labeling to finished products as required: Serial number labels, certification (CE) and related Operate various inspection and test equipment in executing quality control/assurance testing and inspection procedures and operations including, but not limited to: X-ray imaging equipment (training provided) Ultrasound imaging equipment (training provided) Measuring devices such as micrometers, dial indicators, calipers, etc. Linear scales Surface plates Execute specific Quality Management System Procedures as assigned or required Communicate QC results and trends to Production Staff and Management team Be knowledgeable and follow Sun Nuclear Quality Management System policies and procedures Be knowledgeable and follow Sun Nuclear Safety policy and procedures Management has the right to add or change duties at any time. Qualifications and Experience: Education and Experience Minimum of 2 years' experience in quality control/quality assurance testing and inspection role required. Skills and Competencies Work consists of moderately complicated procedures and tasks that require independent judgments such as ability to evaluate results, and coordinate tasks with others. Errors may result in somewhat serious consequences involving customer relations, or damage to expensive equipment. Requires use of radiographic equipment and subsequent evaluation of radiographs (training provided). Ability to operate personal computer using standard computer applications (word processing, spreadsheets, database applications). Ability to read and interpret engineering drawings and specifications and other technical documents. Ability to effectively use measurement and test tools, devices, and equipment (dial indicators, micrometers, height gauges, surface plates, calipers, densitometers, etc.) to assess conformance to technical, physical, and performance requirements. Strong organizational skills and attention to detail are required.

Description A key player in the maritime industry, USMMI expertly manages a diverse fleet of ships. Our expertise implementing maritime contracts, makes us a pivotal force in global commerce and government operations, notably with the U.S. Military Sealift Command and the U.S. Maritime Administration's Tanker Security Program (TSP). As a Jones Act qualified company, we adhere to the highest U.S. shipping standards. USMMI also operate a variety of non-Jones Act qualified ships. Our specialized capabilities in ship design, project management, and conversion allow us to provide tailored and innovative solutions that address the dynamic needs of our clients with precision and efficiency. Our Vision To solve the worlds hardest maritime challenges for a better future Our Mission To provide excellence and reliability in all aspects of ship operations and management services; while affording our shipboard crews and shoreside colleagues a safe, secure, and rewarding work environment. U.S. Marine Management Position Description Disclaimer: - The purpose of this document is to provide a summary of the generic functions/tasks associated with this position. It is not an exhaustive or comprehensive list of all possible position responsibilities, tasks, and duties. The responsibilities, tasks, and duties of the incumbent might differ from those outlined here and additional duties may be assigned at the manager's discretion. The position description details as outlined below are also subject to change and may be reassigned at any time. Business Title: Production Control/Quality Control Analyst (COSIS) Supervisory Responsibilities: No Overtime Eligible: No Supervisor: General Manager (COSIS) Purpose/Summary: U.S. Marine Management, LLC (USMMI) is providing support to the U.S. Army Pre-Positioned Stock Four (APS- 4) Watercraft/Modular Causeway System (MCS) Care of Supplies in Storage (COSIS), Exercise and Maintenance program located at the Watercraft Equipment Base - Yokohama North Dock (WEB-YND) in Yokohama, Japan, to support Military and Humanitarian actions worldwide. The Production Control/Quality Control Analyst will be responsible to the General Manager for the execution of work site services scheduling via monthly calendars and spreadsheets as well as supporting maintenance documentation operations at Yokohama North Dock. The Production Control Production Control/Quality Control Analyst will be responsible for daily Global Combat Support System - Army (GCSS-Army) data input and scheduling management as directed by the General Manager for maintenance and services of US Army Watercraft and Modular Causeway Systems (MCS) located at WEB- YND, Yokohama, Japan. Watercraft to be maintained include Army Small Tugs, Landing Craft Utility and Modular Causeway Systems and all BII/COEI Subsystems allocated for each craft or MCS system. The Analyst will be responsible to develop weekly production packets as directed, assist the maintenance personnel in managing the Global Combat Support System - Army (GCSS-Army) database notifications and Work Orders listed for each watercraft on site, assist with management of the production requirements on a weekly schedule and perform development of Over and Above Service Packets for external vendor maintenance support. The Production Control/Quality Control Analyst will be responsible to assist the Quality Control Supervisor in execution of inspection and quality control of all work performed in support of maintenance of U.S. Army Watercraft and Modular Causeway Systems located at Yokohama, Japan. The Production Control/Quality Control Analyst will be responsible to assist the QC Supervisor with inspections and independent evaluations on COSIS operations as required ensuring compliance with the COSIS contract and Army regulatory standards. This individual will assist with coordination of Quality Assurance (QA) reviews by WEB-YND government staff of maintenance actions and COSIS requirements. The Production Control/Quality Control Analyst will assist with the requirements to build and manage the process and procedural flow diagrams ensuring proper execution of COSIS Tasks and Maintenance Requirements. Key Responsibilities: Prepare and track work order packets for processing and analysis meeting Government requirements, Army Regulations, and COSIS requirements Compile and maintain accountable records, both automated and manual Supervise local labor/subcontractors performing maintenance repairs and pier operations daily and as directed by the General Manager Process follow-ups or modifications on work order documents in coordination with the Maintenance Supervisor Input data into and receive data from GCSS-Army in meeting requirements for the scheduling and oversite of services and maintenance of assigned craft Execute the scheduling and adjust all COSIS watercraft service requirements in coordination with the General Manager and Maintenance Supervisor Responsible for processing Request for Quotes (RFQ) to local and stateside vendors for Maintenance Services in support of Over and Above (O&A) maintenance requirements Responsible for developing all Monthly, Quarterly and Annual Service Packets per vessel checks and services timelines and present to government personnel for processing Responsible for finalizing all service packets in coordination with the Quality Control Supervisor and Maintenance Supervisor meeting PWS and Army Regulatory requirements for services and maintenance of Army Watercraft and MCS Systems Responsible to develop and issue Purchase Orders (PO) within the assigned Netsuite System to local and stateside vendors for Maintenance Services in support of Over and Above Maintenance requirements Responsible for tracking and submission of POs to U.S. Marine Management, LLC Headquarters for Auditing Support Requirements Performs other position related duties as specified by the General Manager and the Maintenance Supervisor in the absence of the General Manager Performs Quality Control support and execution as directed and required per this job description and per the General Managers directives Will assist and support the Maintenance and Safety Inspections for Self-Contained Breathing Apparatus (SCBA) Compressors and Air-Paks and Cylinders Will execute and support filling of SCBA Cylinders as requested in support of USMMI COSIS Operational Requirements Will assist the QC Supervisor with execution of QC Reviews, Logbook entries per system and craft, attending Government Quality Assurance Checks as necessary, monitoring of all Safety, security and environmental compliance at WEB-YND for COSIS Operations Will support and execute requirements to execute onsite training as outlined by the Environmental, Safety and Occupational Health Supervisor Will perform additional duties as directed by the COSIS General Manager Will follow all Company and General Manager Directives in performance of Contract Requirements, and execute adherence to, without exception Position Specifications: Education and Experience Candidate must have been at a minimum an Army/Navy NCO or USCG Merchant Mariner with 5 to 10 years of Watercraft Operations/Ship Repair experience Technical Skills and Competencies Required Good working knowledge of MS Office products (Word, Excel, Power Point, Outlook) and the ability to quickly grasp and work with new systems Excellent written and oral communication skills, and he/she must be adaptive and flexible in meeting the needs of the business. Ability to prepare correspondence and reports Ability to identify complex problems and review related information to develop and evaluate options and implement solutions Supports commitment to safety and other selected company standards and certifications USMMI is a drug-free work environment and requires employees to take random drug tests during their employment with the company. Candidate must be a U.S. citizen capable of obtaining a security clearance from the Defense Security Service (DSS). Learning Description: The key skills and competencies the incumbent should learn in this position. U.S. Marine Management, LLC Values U.S. Marine Management, LLC Operations/Structure Applicable U.S. Marine Management, LLC systems and processes Applicable Regulatory requirements and trends Influencing Team Management Analysis and problem solving GCSS-Army U.S. Marine Management, LLC Netsuite System Travel Requirements: N/A Physical Demands & Work Environment: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Typically, the employee will be required to split time between a general office setting and working on board U.S. Army Class A, B and C watercraft and Modular Causeway Systems, performing sea trials, dock trials and vessel equipment maintenance and operational checks. Vessel climates change with the seasons and the employee may be in varying temperatures requiring various protective clothing. Employee may be required to work outside on vessels performing checks and services, which may be during inclement weather, requiring the wear of rain gear and safety items. In the office setting the employee may sit comfortably to perform the work, usually at a computer terminal - with short breaks or lunch period. However, there may be some bending/stooping, reaching above shoulder level, walking; standing; carrying of light items such as parts, test equipment, papers, books or packages of up to 25 pounds. Should be able to hear & speak clearly using phone / headset to communicate with customers; be able to navigate, view & enter information on the computer

JOB TITLE: Quality Control Inspector JOB CODE: Quality Control REPORTS TO: Quality Assurance Manager. Direct on-site project direction and daily scheduling provided through continuous communication with the applicable IMIA Project Manager and/or Supervisor. Summary of position: Responsible for monitoring quality control/assurance requirements of all preservation preformed onboard commercial and US Navy vessel in accordance with established Navy regulations and industry standards or specific contractual requirements as defined in the Scope of Work. Collaborate with customer QA personnel on necessary aspects of the job. Essential Job Requirements: Produce/create electronic/handwritten Quality Assurance documentation as Objective Quality Evidence for work performed throughout the preservation process. Develop and Maintain Test and Inspection Plan (TIP) for all assigned jobs. Monitor and document all required readings with regard to, but not limited to, metal anchor tooth (profile), paint wet/dry film thickness (DFT), steel temperatures and all required environmental readings using appropriate equipment to include: micrometer, dry film thickness gauge, infrared thermometer, psychomotor. Ensure all assigned equipment is maintained in good working order with within all calibration certification intervals. All of the above requirements shall be completed in a safe and efficient manner so as not to cause injury to self or others. Required Education: High School diploma or equivalent Required Certification: NACE Inspector and/or SSPC NBPI required. Required Experience: Formal or informal on-the-job training in the marine industry; familiarity with Navy and Society for Protective Coatings standards. Required Skills: Must possess knowledge of Maritime paintings standards with particular emphasis in US Navy ship preservation criterion. Word processing, spreadsheet, email, and database computer skills required. Must be able to accomplish mathematical calculations associated with preservation readings and documentation; must be able to discern and carry out complex written, oral, or diagramed instructions. Must be able to take direction; interact professionally, knowledgeably and cooperatively with supervisors and co-workers and customer representatives. Physical Requirements: Must be physically capable of working an 8-10 hour day requires average use of computer, some physical dexterity, and agility within confined and restricted spaces & tanks. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Supervisory Responsibilities: None Working Conditions: Regularly stand for long periods of time; work on scaffolds and ladders; work on top of machinery; work in confined spaces. Regularly exposed to extreme temperatures, high noise levels, toxic or caustic chemicals, fumes, airborne particles, outdoor weather conditions, dusty conditions, wet and/or humid conditions, hazardous machinery, precarious places, close proximity to other employees. Overtime or shift work involved. Travel often required. Must follow strict safety procedures.

Job Description Job Title: Quality Control Technician - Asphalt Department: Asphalt Lab Reports to: Manager - Asphalt Quality Control Major Role and Purpose: Perform all testing and sampling of materials in the lab or on the job site to ensure product meets specifications of customer and/or State. Description of Duties: Ensure a safe work environment in compliance with all federal, state, local and company safety policies and procedures using the appropriate tools and equipment for the task. Update and maintain current asphalt mix designs. Select products for tests at specified stages in the production process. Perform quality and gradation tests on aggregates and bituminous mixtures. Record test data into computer and evaluate results. Field test product (monitor temperature of mixtures, rolling patterns and roller speeds, paver speed and operation, appearance of paved material for consistent quality, and/or perform in place density tests). Troubleshoot problems with product as required. Inspect and calibrate lab equipment. Maintain the cleanliness of the lab. Ensure the plant is set up and running correctly. Prepare and distribute test reports on a timely basis. Communicate with plant foremen and road crew. Perform all other duties deemed necessary or assigned. Education: High School Degree required. Work Experience/Qualifications: Minimum 2 years of prior experience in quality control, asphalt environment preferred. Certificate in Basic Aggregates and HMA technician preferred. Asphalt Field Level I & II preferred. Good math skills. Valid driver's license and able to drive a company vehicle as required. Excellent communication, organizational and customer service skills. Ability to lift 90lbs (asphalt & aggregate samples). Physical Demands: Job requires the following motions: pushing, pulling, reaching, bending, and lifting. Ability to lift 90 lbs. (asphalt and aggregate samples). EOE/M/F/Disability/Vet About Branscome: OUR COMPANY For more than 60 years in Virginia, our crews have been safely delivering the infrastructure that our communities are built on. We take immense pride in building the things that you can see, but also those you can't. Camaraderie in the field, with our clients, and out in the community is the spirit that drives our dedication and commitment to excellence. Branscome's vertically integrated services provide a streamlined end-to-end scalable solution for our customers. It's the satisfaction of a job well done recognition of team effort and the delight of our customers that keep us creating infrastructure and connecting people. OUR TEAM When you work for Branscome, you join our innovative team in completing the area's most important large-scale, fast-track projects. You help us provide excavation, site work, underground utilities, asphalt paving, ready-mix concrete, and more to a slew of satisfied clients, including VDOT, Norfolk International Terminal, numerous local governments, private developers, and corporate entities. At Branscome, workers take pride in their work and inspire each other with their teamwork, innovation, and enthusiasm. This attitude of excellence generates the superior customer service that Branscome is known for. Branscome benefits include health, dental, vision, life insurance, paid time off, retirement savings and professional development. EQUAL EMPLOYMENT OPPORTUNITY When you work for Branscome, you join our diverse, innovative team. Our differences breed the ideas which fuel our success. Every aspect of our relationship with current and potential employees is free from discrimination and harassment based on race, color, religion, sex, national origin, age, genetic information, disability, veteran status, sexual orientation, gender identity, or any other category protected by applicable law. This pertains not only to initial employment and working conditions but also to all actions affecting hiring, promotions and transfers, training (including apprenticeship and pre-apprenticeship when required), compensation, benefits, and termination of employment. Adherence to this policy and compliance with the law is expected of all employees. If you need assistance completing the online application process, please contact the Human Resources department at **************. Branscome EEO Statement Branscome is an Equal Opportunity Employer. It is the policy of this Company to assure that applicants are employed, and that employees are treated during employment, without regard to their race, religion, sex, color, national origin, age, disability, genetic information, military or veteran status, sexual orientation, gender identity, and any other characteristic protected by law. Such action shall include: employment, upgrading, demotion, or transfer; recruitment or recruitment advertising; layoff or termination; rates of pay or other forms of compensation; and selection for training, including apprenticeship, pre-apprenticeship, and/or on-the-job training. Branscome is in compliance with local, state, and federal laws and regulations and ensure equitable opportunities in all aspects of employment. Branscome will provide reasonable accommodation to all applicants who require assistance completing the online application process. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process and need an alternative method for applying, please email **************** for assistance. We are committed to finding reasonable accommodations for candidates with special needs or disabilities during our recruiting process. Learn more: EEO is the Law and EEOC is the Law Supplement. Powered by JazzHR jB2loKhP0t

Would you like to join an international team working to improve the future of healthcare? Do you want to enhance the lives of millions of people? Grifols is a global healthcare company that since 1909 has been working to improve the health and well-being of people around the world. We are leaders in plasma-derived medicines and transfusion medicine and develop, produce and market innovative medicines, solutions and services in more than 110 countries and regions. Quality Systems Associate Summary: Under the direct supervision of the Quality Systems Manager, perform quality assurance and Training functions to ensure compliance with internal and external regulations and protocol. Primary responsibilities for role (level-specific responsibilities should be included in the chart below): * Completes weekly review of equipment QC and maintenance records. * Documents, investigates, and performs root-cause analysis for deviations and customer complaints, specifically in how they related to product quality and/or donor safety. * Inspects and releases incoming supplies. Investigates and reports supplies have not met quality specifications and requirements prior to use. * Performs documentation review for unsuitable test results. * Assists the Quality Systems Manager to ensure that cGMP regulation, SOPs and regulatory requirements are followed. Duties include: * Under the direct supervision of the Quality Systems Manager, perform quality assurance and Training functions to ensure compliance with internal and external regulations and protocol. * Performs all product release activities. * Reviews lookback information and documentation. * Reviews waste shipment documentation. * Reviews unexpected plasmapheresis events including electronic donor chart and related documentation pertaining to exceptions occurring during the donation process. * Reviews electronic donor chart exceptions impacting donor eligibility/safety and/or product quality. * Reviews donor deferral notifications from competitor centers. * Reviews plasma processing documentation to ensure the proper freezing, storage and handling of product. Quality Systems Associate * Assist the Quality Systems Manager to ensure center training programs follow procedural requirements as defined in the donor center SOP and/or training programs documents. Duties include: * Creates, maintains, and audits training records and files to ensure compliance. * Performs employee training observations to ensure staff competency prior to releasing employees to work independently. * Conducts required training activities for Center Notifications, Corporate Directives, SOP changes, and initial SOP implementations. * On an occasional basis, when the Quality Systems Manager is absent, the Quality Systems Associate may be required to perform the following duties: * Reviews and approves of deferred donor reinstatement activities. * Assists with completion of the internal donor center audit. Summary: * Performs review of monthly trending report. * Performs review of donor adverse events reports and the applicable related documentation. * Conducts training to address donor center corrective and preventative measures. This job description is intended to present the general content and requirements for the performance of this job. The description is not to be construed as an exhaustive statement of duties, responsibilities, or requirements. Managers and supervisors may assign other duties as needed. Additional Responsibilities: Is certified and maintains certification as a Donor Center Technician. Knowledge, Skills, and Abilities: Developing command of interpersonal communication, organizational and problem-solving skills. Ability to understand FDA regulations. Strong integrity and commitment to quality and compliance. Good knowledge of mathematics. Legible handwriting. Proficiency with computers. Ability to work flexible scheduling to meet business needs. Performs basic document review and employee observations. Communicates openly with the CQM on issues noted during reviews. Ability to understand and follow SOP's and protocols. Ability to perform primary responsibilities of the Quality Associate role in a proficient manner. Has a basic understanding of cGMP and quality systems. Is able to spend hours sitting and reviewing documentation for accuracy. Demonstrates good organizational skills and attention to detail. Education: High school diploma or GED. Obtains state licensures or certifications if applicable. Experience: Typically requires no previous related experience. Occupational Demands Form # 70: Work is performed in a plasma center. Exposure to biological fluids with potential exposure to infectious organisms. Exposure to electrical office and laboratory equipment. Exposure to extreme cold below 32 degrees F while performing reviews in plasma freezers. Personal protective equipment required such as protective eyewear, garments, gloves and cold-gear. Work is performed mostly while sitting for up to 4 to 6 hours per day and standing from 2 to 4 hours per day. The position does require bending and twisting of neck up from 2 to 4 hours per day. Frequent hand movement of both hands with the ability to make fast, simple, movements of the fingers, hands, and wrists. Ability to make precise coordinated movements, of the fingers to grasp and manipulate objects. Frequent foot movement; may squat, crouch or sit on one's heels on rare occasion. Occasionally walks, bends and twists at waist. Light lifting of 15lbs. with a maximum lift of 50lbs. May reach below shoulder height. Hearing acuity essential. Color perception/discrimination, near vision and far vision correctable in one eye to 20/30 and to 20/100 in the other eye. Able to communicate information and ideas so others will understand; with the ability to listen to and understand information and ideas presented through spoken words and sentences. Works independently with little guidance or reliance on oral or written instructions. Performs a wide range of tasks as dictated by variable demands and changing conditions. Relates sensitive information to diverse groups. #biomatusa Third Party Agency and Recruiter Notice: Agencies that present a candidate to Grifols must have an active, nonexpired, Grifols Agency Master Services Agreement with the Grifols Talent Acquisition Department. Additionally, agencies may only submit candidates to positions that they have been engaged to work on by a Grifols Recruiter. All resumes must be sent to a Grifols Recruiter under these terms or they will be considered a Grifols candidate. Grifols provides equal employment opportunities to applicants and employees without regard to race; color; sex; gender identity; sexual orientation; religious practices and observances; national origin; pregnancy, childbirth, or related medical conditions; status as a protected veteran or spouse/family member of a protected veteran; or disability. We will consider for employment all qualified applicants in a manner consistent with the requirements of all applicable laws. Location: NORTH AMERICA : USA : VA-Hampton:USHAM - Hampton VA-W Mercury Bl-BIO

Responsible for executing quality control/assurance inspection, testing and verification of finished products, work in-process, procured materials and components to assess and verify conformance to requirements and production process capabilities. Facilitate continuous improvement of customer satisfaction and operational performance. Provide support to other departments including, but not limited to Production, Shipping, Service, and Purchasing. Key Areas of Responsibility: * Inspect and test vendor supplied materials for conformance to specifications. * Inspect and test customer returns. * Inspect and test in-process products to assess conformance to specifications. * Inspect and test final products to assess conformance to specifications. * Record results of all inspection and testing activities accurately. * Apply, or assure the application of, labeling to finished products as required: Serial number labels, certification (CE) and related * Operate various inspection and test equipment in executing quality control/assurance testing and inspection procedures and operations including, but not limited to: * X-ray imaging equipment (training provided) * Ultrasound imaging equipment (training provided) * Measuring devices such as micrometers, dial indicators, calipers, etc. * Linear scales * Surface plates * Execute specific Quality Management System Procedures as assigned or required * Communicate QC results and trends to Production Staff and Management team * Be knowledgeable and follow Sun Nuclear Quality Management System policies and procedures * Be knowledgeable and follow Sun Nuclear Safety policy and procedures * Management has the right to add or change duties at any time. Qualifications and Experience: Education and Experience * Minimum of 2 years' experience in quality control/quality assurance testing and inspection role required. Skills and Competencies * Work consists of moderately complicated procedures and tasks that require independent judgments such as ability to evaluate results, and coordinate tasks with others. * Errors may result in somewhat serious consequences involving customer relations, or damage to expensive equipment. * Requires use of radiographic equipment and subsequent evaluation of radiographs (training provided). * Ability to operate personal computer using standard computer applications (word processing, spreadsheets, database applications). * Ability to read and interpret engineering drawings and specifications and other technical documents. * Ability to effectively use measurement and test tools, devices, and equipment (dial indicators, micrometers, height gauges, surface plates, calipers, densitometers, etc.) to assess conformance to technical, physical, and performance requirements. * Strong organizational skills and attention to detail are required.

Job Description Burlington Medical is thrilled to provide a great career opportunity for a Quality Control Inspector on Second Shift. with one of the leading manufacturers and providers of radiation protection products. The hours for this position are 2:45pm -11:15pm. Job Purpose: To ensure compliance of products and processes. Duties: Conduct in-process, receipt, and final inspections. Initiate Non-Conformance reports (Material Rejection Notices) as required. Work with other company personnel to resolve nonconformances. Skills/Qualifications: 0-2 years quality control experience Ability to understand manufacturing processes and the means by which they are controlled Experience with statistical analysis of manufacturing processes Strong problem-solving skills A good work ethic Good interpersonal and communication skills High school Diploma or equivalent Word, Excel, Outlook knowledge preferred Operation of basic measuring devices Ability to work on their own

Job DescriptionLocation: Norfolk, VA Clearance: Top Secret Position Type: Full-Time AERMOR is seeking a Quality Control Specialist IV who will serve as a senior technical expert responsible for ensuring all products, systems, and processes. The selected candidate will apply advanced engineering principles and practical problem-solving skills to evaluate, test, and verify performance compliance of systems-particularly U.S. Navy Navigation equipment and systems. This is not a remote position. Key Responsibilities: Lead and execute quality control (QC) and assurance processes for engineering products, test specimens, and systems under development. Ensure that all products, services, and fabrication methods conform to applicable engineering, safety, and operational standards. Conduct hands-on testing, inspection, and validation of U.S. Navy Navigation systems and supporting components. Review and interpret engineering plans, blueprints, and technical drawings; provide feedback and recommendations to improve design quality. Collaborate with design and fabrication teams to develop and construct test specimens, models, and prototypes. Utilize Computer-Aided Drafting (CAD) tools to prepare shop drawings and documentation supporting system and model construction. Evaluate material specifications and fabrication methods to ensure compliance with project and safety requirements. Support system-level testing and evaluation, performance verification, and failure analysis activities. Contribute to continuous process improvement, identifying and mitigating quality risks across design and manufacturing stages. Provide technical guidance and mentorship to junior staff, reinforcing best practices in engineering quality control and safety assurance. Qualifications: 10 years of professional experience in engineering or technical fields focused on solving complex technical problems. Hands-on experience with U.S. Navy Navigation equipment and systems, including at least three of the following four areas: Systems requirements, operational requirements, test & evaluation, and training. Strong understanding of engineering principles, methods, and industry-standard testing techniques. Proven ability to ensure product, process, and service quality and safety compliance. Experience conducting performance testing and process validation for engineering or manufacturing operations. Proficiency in CAD software (e.g., AutoCAD, SolidWorks, or equivalent). Ability to interpret and apply engineering plans, blueprints, and material specifications. Demonstrated knowledge of fabrication techniques and construction of test specimens or models. Powered by JazzHR hRMZuraU2o

Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices all over the country. We partner with businesses as well as jobseekers to place individuals into positions efficiently. We are currently in need of QA/QC Inspectors to join our team in Pascagoula, MS, Bremerton, WA and Chesapeake, VA. Pay Range: $24-36/hour Summary Knowledge of QA/QC functions Familiarity with inspection and test procedures Perform QA/QC functions to ensure compliance with industry standards and company requirements Conduct inspections and tests according to established procedures Produce/create electronic/handwritten Quality Assurance documentation as Objective Quality Evidence for work performed throughout the preservation process. Develop and Maintain Test and Inspection Plan (TIP) for all assigned jobs. Monitor and document all required readings with regard to, but not limited to, metal anchor tooth (profile), paint wet/dry film thickness (DFT), steel temperatures and all required environmental readings using appropriate equipment to include: micrometer, dry film thickness gauge, infrared thermometer, psychomotor. Ensure all assigned equipment is maintained in good working order with within all calibration certification intervals. All of the above requirements shall be completed in a safe and efficient manner so as not to cause injury to self or others. Requirements Minimum of 7 years of experience in manufacturing, shipyard, or quality (testing/inspecting) roles Proficiency in MS Office applications Ability to read and interpret codes, specifications, and advanced blueprints 3 years minimum NAVSEA support experience with submarine preservation NACE Inspector and/or SSPC NBPI required. Benefits CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: Health Dental Vision Voluntary Life/Voluntary AD&D Short-Term Disability Long-Term Disability Hospital Indemnity Accident Critical Illness 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

Job Title: Quality Control Technician - Asphalt Department: Asphalt Lab Reports to: Manager - Asphalt Quality Control Major Role and Purpose: Perform all testing and sampling of materials in the lab or on the job site to ensure product meets specifications of customer and/or State. Description of Duties: Ensure a safe work environment in compliance with all federal, state, local and company safety policies and procedures using the appropriate tools and equipment for the task. Update and maintain current asphalt mix designs. Select products for tests at specified stages in the production process. Perform quality and gradation tests on aggregates and bituminous mixtures. Record test data into computer and evaluate results. Field test product (monitor temperature of mixtures, rolling patterns and roller speeds, paver speed and operation, appearance of paved material for consistent quality, and/or perform in place density tests). Troubleshoot problems with product as required. Inspect and calibrate lab equipment. Maintain the cleanliness of the lab. Ensure the plant is set up and running correctly. Prepare and distribute test reports on a timely basis. Communicate with plant foremen and road crew. Perform all other duties deemed necessary or assigned. Education: High School Degree required. Work Experience/Qualifications: Minimum 2 years of prior experience in quality control, asphalt environment preferred. Certificate in Basic Aggregates and HMA technician preferred. Asphalt Field Level I & II preferred. Good math skills. Valid driver's license and able to drive a company vehicle as required. Excellent communication, organizational and customer service skills. Ability to lift 90lbs (asphalt & aggregate samples). Physical Demands: Job requires the following motions: pushing, pulling, reaching, bending, and lifting. Ability to lift 90 lbs. (asphalt and aggregate samples). EOE/M/F/Disability/Vet About Branscome: OUR COMPANY For more than 60 years in Virginia, our crews have been safely delivering the infrastructure that our communities are built on. We take immense pride in building the things that you can see, but also those you can't. Camaraderie in the field, with our clients, and out in the community is the spirit that drives our dedication and commitment to excellence. Branscome's vertically integrated services provide a streamlined end-to-end scalable solution for our customers. It's the satisfaction of a job well done recognition of team effort and the delight of our customers that keep us creating infrastructure and connecting people. OUR TEAM When you work for Branscome, you join our innovative team in completing the area's most important large-scale, fast-track projects. You help us provide excavation, site work, underground utilities, asphalt paving, ready-mix concrete, and more to a slew of satisfied clients, including VDOT, Norfolk International Terminal, numerous local governments, private developers, and corporate entities. At Branscome, workers take pride in their work and inspire each other with their teamwork, innovation, and enthusiasm. This attitude of excellence generates the superior customer service that Branscome is known for. Branscome benefits include health, dental, vision, life insurance, paid time off, retirement savings and professional development. EQUAL EMPLOYMENT OPPORTUNITY When you work for Branscome, you join our diverse, innovative team. Our differences breed the ideas which fuel our success. Every aspect of our relationship with current and potential employees is free from discrimination and harassment based on race, color, religion, sex, national origin, age, genetic information, disability, veteran status, sexual orientation, gender identity, or any other category protected by applicable law. This pertains not only to initial employment and working conditions but also to all actions affecting hiring, promotions and transfers, training (including apprenticeship and pre-apprenticeship when required), compensation, benefits, and termination of employment. Adherence to this policy and compliance with the law is expected of all employees. If you need assistance completing the online application process, please contact the Human Resources department at **************. Branscome EEO Statement Branscome is an Equal Opportunity Employer. It is the policy of this Company to assure that applicants are employed, and that employees are treated during employment, without regard to their race, religion, sex, color, national origin, age, disability, genetic information, military or veteran status, sexual orientation, gender identity, and any other characteristic protected by law. Such action shall include: employment, upgrading, demotion, or transfer; recruitment or recruitment advertising; layoff or termination; rates of pay or other forms of compensation; and selection for training, including apprenticeship, pre-apprenticeship, and/or on-the-job training. Branscome is in compliance with local, state, and federal laws and regulations and ensure equitable opportunities in all aspects of employment. Branscome will provide reasonable accommodation to all applicants who require assistance completing the online application process. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process and need an alternative method for applying, please email **************** for assistance. We are committed to finding reasonable accommodations for candidates with special needs or disabilities during our recruiting process. Learn more: EEO is the Law and EEOC is the Law Supplement.

JOB TITLE: Quality Control Inspector JOB CODE: Quality Control REPORTS TO: Quality Assurance Manager. Direct on-site project direction and daily scheduling provided through continuous communication with the applicable IMIA Project Manager and/or Supervisor. Summary of position: Responsible for monitoring quality control/assurance requirements of all preservation preformed onboard commercial and US Navy vessel in accordance with established Navy regulations and industry standards or specific contractual requirements as defined in the Scope of Work. Collaborate with customer QA personnel on necessary aspects of the job. Essential Job Requirements: Produce/create electronic/handwritten Quality Assurance documentation as Objective Quality Evidence for work performed throughout the preservation process. Develop and Maintain Test and Inspection Plan (TIP) for all assigned jobs. Monitor and document all required readings with regard to, but not limited to, metal anchor tooth (profile), paint wet/dry film thickness (DFT), steel temperatures and all required environmental readings using appropriate equipment to include: micrometer, dry film thickness gauge, infrared thermometer, psychomotor. Ensure all assigned equipment is maintained in good working order with within all calibration certification intervals. All of the above requirements shall be completed in a safe and efficient manner so as not to cause injury to self or others. Required Education: High School diploma or equivalent Required Certification: NACE Inspector and/or SSPC NBPI required. Required Experience: Formal or informal on-the-job training in the marine industry; familiarity with Navy and Society for Protective Coatings standards. Required Skills: Must possess knowledge of Maritime paintings standards with particular emphasis in US Navy ship preservation criterion. Word processing, spreadsheet, email, and database computer skills required. Must be able to accomplish mathematical calculations associated with preservation readings and documentation; must be able to discern and carry out complex written, oral, or diagramed instructions. Must be able to take direction; interact professionally, knowledgeably and cooperatively with supervisors and co-workers and customer representatives. Physical Requirements: Must be physically capable of working an 8-10 hour day requires average use of computer, some physical dexterity, and agility within confined and restricted spaces & tanks. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Supervisory Responsibilities: None Working Conditions: Regularly stand for long periods of time; work on scaffolds and ladders; work on top of machinery; work in confined spaces. Regularly exposed to extreme temperatures, high noise levels, toxic or caustic chemicals, fumes, airborne particles, outdoor weather conditions, dusty conditions, wet and/or humid conditions, hazardous machinery, precarious places, close proximity to other employees. Overtime or shift work involved. Travel often required. Must follow strict safety procedures.

Burlington Medical is thrilled to provide a great career opportunity for a Quality Control Inspector on Second Shift. with one of the leading manufacturers and providers of radiation protection products. The hours for this position are 2:45pm -11:15pm. Job Purpose: To ensure compliance of products and processes. Duties: Conduct in-process, receipt, and final inspections. Initiate Non-Conformance reports (Material Rejection Notices) as required. Work with other company personnel to resolve nonconformances. Skills/Qualifications: 0-2 years quality control experience Ability to understand manufacturing processes and the means by which they are controlled Experience with statistical analysis of manufacturing processes Strong problem-solving skills A good work ethic Good interpersonal and communication skills High school Diploma or equivalent Word, Excel, Outlook knowledge preferred Operation of basic measuring devices Ability to work on their own