Quality control analyst jobs in Orlando, FL

Job Description Do you have a minimum of five (5) years' experience in aircraft maintenance on Falcon's, alteration of turbo fan powered business aircraft, and proficient in the use of the various inspection methods, techniques, and practices? If so, APPLY TODAY! Dassault Falcon Jet recently opened a state-of-the-art flagship Maintenance, Repair and Overhaul (MRO) facility at the Melbourne Orlando International Airport in Melbourne, Florida. Dassault Falcon Jet will serve customers across North and South America and beyond, the complex will accommodate all current Falcon models, (including the new, ultra-long-range Falcon 10X, the largest purpose-built business jet), and will be capable of performing major maintenance and modifications on up to 18 Falcon models. Dassault Falcon Jet in Melbourne, Florida is seeking a Quality Control Inspector who will be primarily responsible for performing inspections of aircraft maintenance and alterations for quality and airworthiness. The Quality Control Inspector may also perform aircraft maintenance (including inspection), preventive maintenance and alteration and assist customers with technical and operational support relative to the customer's aircraft. DUTIES AND RESPONSIBILITES Responsible for Quality Assurance for quality and airworthiness and may report to Maintenance Supervision for the assignment of aircraft maintenance tasks. Using technical data acceptable to and/or approved by the FAA, the Quality Control Inspector provides inspection and approval for return to service with respect to work performed. Adheres to general work and safety requirements. May travel to locations other than the Repair Station's fixed location to support customer aircraft. May perform inspections, adjusts and repairs, replace components and corrects any malfunction or deficiency with and without power applied to the aircraft. May perform repairs on components removed from the aircraft. May remove and re-install aircraft components to gain access for the performance of assigned tasks. May troubleshoot (fault isolation) aircraft system malfunction. May perform basic mechanical and electrical removals and installations. Documents, records, and signs for work performed and/or inspected per RSM/QCM. Perform other related tasks as assigned by supervision. May fuel and defuel aircraft. May perform aircraft line services. Performs inspection on-site and at off-site locations. Supports production aircraft under Production Certificate System. Assists other employees in the performance of their duties within area(s) of qualification. Is familiar with and adheres to the RSM/QCM and applicable regulations. Is responsible for and accountable for work performed. QUALIFICATIONS Possess a Mechanics certificate with Airframe and Power plant ratings. Minimum 5 years' experience in aircraft maintenance and alteration of turbo fan powered business aircraft. Trained in or experience with the methods, techniques, practices, aids, equipment, and tools used to perform aircraft maintenance and alterations. Minimum 5 years' experience working on our Falcon models. Thoroughly familiar with the applicable regulations, the RSM/QCM and proficient in the use of the various inspection methods, techniques, practices, aids, equipment, and tools appropriate for the work being performed and approved for return to service. Able to work unsupervised for extended periods. Excellent written and verbal communications skills. Can Do attitude - highly motivated, Demonstrate excellent customer service skills. Team player that exhibits and models Dassault Falcon Jet core values and attributes. Repair Station Training Applicable Airframe Initial Training Applicable Engine Training Applicable Avionics Systems Training RVSM Training FAR 91.411/FAR 91.413 Training Human Factors Training Must be able to climb and lift up to 50lbs. Performs duties as assigned. Additional Information: This position requires successful completion of the Melbourne Airport background check process. Compensation and Benefits: The compensation for this position typically falls between $38 and $55 per hour. This position is eligible for tech leveling to reflect varying levels of experience. This position is eligible for overtime and may be eligible for shift differential or relocation assistance. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest, and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

and Objectives The Analytical Chemist job duties consist of the technical aspects of the department in support of directions from the QC Analytical Lab Supervisor and the Quality Operations Manager. He/She is responsible for ensuring regulatory compliance to FDA Guidelines (DSHEA), customer requirements, and departmental function. The primary responsibility is to develop and validate analytical methods for various dietary finished product matrixes and train analysts and chemists. He/She will support analytical testing of incoming raw materials, in-process samples, stability, and finished goods within the QC Laboratory. Essential Job Functions Coordinate the testing of raw materials and finished goods with outside labs when required, and allocate results of said testing to the necessary persons. Develop and perform analytical methods based on adaptations of USP, AOAC, NSF, or other industrial resources. Write SOPs and methods to meet cGMP's and GLP. Validate and qualify laboratory methods including writing of protocols and reports. Train chemists and analysts on laboratory methods & procedures when requested. Assist and supervise incoming raw materials and finished product analytical analysis. Perform daily testing of incoming samples using wet chemical and instrumental techniques, as needed. Maintain and record analytical data within prescribed notebooks. Compile analytical testing data and issue testing justification documentation. Compile lab results and issue completed worksheets for final review. Prepare various laboratory reagents as required for daily operations. Order and stock all lab supplies required for operation while keeping cost down through effective sourcing and purchasing. Ensure accuracy and completeness of all QC logbooks and binders. Provide peer review of other chemists' work as needed. Ensure that the QC lab is kept in good repair. Communicate issues and non-conformances to the QC Analytical Lab Supervisor and Quality Operations Manager immediately. Conduct Lab Investigations for all unexpected results. Knowledge, Skills, and Abilities Required Must be Proficient in PC functions, (WORD, EXCEL, ACCESS, POWERPOINT, etc.) and Empower software. Must be well organized and detail oriented. Demonstrate good verbal and written communication skills. Be familiar with and demonstrate excellent advanced laboratory problem solving skills. Must be experienced in advanced laboratory testing methods. Must be knowledgeable in HPLC configuration including column designs, flow rates, reagent variabilities, wavelengths, and detectors. Must be knowledgeable in solubility factors, oil products, water-based products, and oil/water emulsions and the impacts to testing formulations of these designs. Must demonstrate Good Laboratory Practice in completing daily work assignments. Competent in performing mathematical and scientific calculations as they relate to job function. Communication and management skills. Ability to manage, carry out, and prioritize analytical functions. Ability to see areas that need improvement and to address them. Supervisory Responsibility Responsible for ensuring all requirements for Analytical functions are met. Responsible for providing an evaluation of the technical performance of analytical chemists as requested. Working Conditions Working functions are generally limited to the QC lab with some facility work at times. Minimum Qualifications BS Degree in chemistry, analytical chemistry, instrumental analysis, physical chemistry (or extensive analytical laboratory experience in lieu of degree) . 10 years previous laboratory experience. Driven, intelligent, and motivated to succeed and improve. Extensive Analytical (HPLC) analysis experience Excellent people skills, and ability to function under pressure. Success Factors Driven and motivated. Technical leadership. Intelligent and displays aptitude. Problem solving skills. Detail oriented. Self-motivated team player. Well organized. Willingness to cooperate and work with other departments. Benefits Retirement plan 401(k) - 401(k) matching Dental, Vision, Health, Short/long term disability and Life insurance Paid time off Holiday

and Objectives The Analytical Chemist job duties consist of the technical aspects of the department in support of directions from the QC Analytical Lab Supervisor and the Quality Operations Manager. He/She is responsible for ensuring regulatory compliance to FDA Guidelines (DSHEA), customer requirements, and departmental function. The primary responsibility is to develop and validate analytical methods for various dietary finished product matrixes and train analysts and chemists. He/She will support analytical testing of incoming raw materials, in-process samples, stability, and finished goods within the QC Laboratory. Essential Job Functions * Coordinate the testing of raw materials and finished goods with outside labs when required, and allocate results of said testing to the necessary persons. * Develop and perform analytical methods based on adaptations of USP, AOAC, NSF, or other industrial resources. * Write SOPs and methods to meet cGMP's and GLP. * Validate and qualify laboratory methods including writing of protocols and reports. * Train chemists and analysts on laboratory methods & procedures when requested. * Assist and supervise incoming raw materials and finished product analytical analysis. * Perform daily testing of incoming samples using wet chemical and instrumental techniques, as needed. * Maintain and record analytical data within prescribed notebooks. * Compile analytical testing data and issue testing justification documentation. * Compile lab results and issue completed worksheets for final review. * Prepare various laboratory reagents as required for daily operations. * Order and stock all lab supplies required for operation while keeping cost down through effective sourcing and purchasing. * Ensure accuracy and completeness of all QC logbooks and binders. * Provide peer review of other chemists' work as needed. * Ensure that the QC lab is kept in good repair. * Communicate issues and non-conformances to the QC Analytical Lab Supervisor and Quality Operations Manager immediately. * Conduct Lab Investigations for all unexpected results. Knowledge, Skills, and Abilities Required * Must be Proficient in PC functions, (WORD, EXCEL, ACCESS, POWERPOINT, etc.) and Empower software. * Must be well organized and detail oriented. * Demonstrate good verbal and written communication skills. * Be familiar with and demonstrate excellent advanced laboratory problem solving skills. * Must be experienced in advanced laboratory testing methods. * Must be knowledgeable in HPLC configuration including column designs, flow rates, reagent variabilities, wavelengths, and detectors. * Must be knowledgeable in solubility factors, oil products, water-based products, and oil/water emulsions and the impacts to testing formulations of these designs. * Must demonstrate Good Laboratory Practice in completing daily work assignments. * Competent in performing mathematical and scientific calculations as they relate to job function. Communication and management skills. * Ability to manage, carry out, and prioritize analytical functions. * Ability to see areas that need improvement and to address them. Supervisory Responsibility * Responsible for ensuring all requirements for Analytical functions are met. * Responsible for providing an evaluation of the technical performance of analytical chemists as requested. Working Conditions * Working functions are generally limited to the QC lab with some facility work at times. Minimum Qualifications * BS Degree in chemistry, analytical chemistry, instrumental analysis, physical chemistry (or extensive analytical laboratory experience in lieu of degree) . * 10 years previous laboratory experience. * Driven, intelligent, and motivated to succeed and improve. * Extensive Analytical (HPLC) analysis experience * Excellent people skills, and ability to function under pressure. Success Factors * Driven and motivated. * Technical leadership. * Intelligent and displays aptitude. * Problem solving skills. * Detail oriented. * Self-motivated team player. * Well organized. * Willingness to cooperate and work with other departments. Benefits * Retirement plan 401(k) - 401(k) matching * Dental, Vision, Health, Short/long term disability and Life insurance * Paid time off * Holiday

Pritchard Industries is a dynamic and innovative provider of comprehensive facility services, dedicated to enhancing the operational efficiency of our client partners in the industries we serve. With services from facility maintenance and janitorial to landscaping, we enable desired outcomes for our clients through consistent service and outstanding people. We are seeking a Quality Control Inspector for Orlando International Airport (MCO). This dynamic, hands-on inspector will be responsible for upholding quality standards and processes to ensure the cleanliness and maintenance of airport facilities are maintained or exceed contractual obligations. This position will report to the Site Manager. Bilingual: English & Spanish required. * A current and valid Florida driver's license is required * The expectation is to work weekends, days, nights and even holidays if required Responsibilities: * Conduct regular inspections of airport facilities to ensure adherence to quality standards. * Identify opportunities for improvement and address quality concerns promptly. * Engage with customers to understand their needs and address any quality issues. * Analyze data to identify trends and areas for growth within the quality control process. * Provide training, coaching, and feedback to employees to ensure compliance with quality standards. * Generate reports and distribute them to relevant personnel and clients. * Collaborate with management to develop strategies for increasing productivity and maintaining quality. * Stay updated on industry trends and ensure quality processes align with current standards. * Other duties as needed by company Qualifications: * High school diploma or equivalent required; relevant certification or associate degree preferred. * Proven experience in quality control in janitorial/facilities management or similar industry. * Strong attention to detail and ability to identify areas for improvement. * Must have experience and knowledge in janitorial cleaning projects, i.e., floor care, strip and wax, carpet extraction, buffing, scrubbing, burnishing * Strong knowledge of janitorial cleaning equipment and ability to conduct inspections of the cleaning machines. * Excellent communication skills to interact with customers and provide feedback to employees. * Ability to analyze data and generate reports to track quality metrics * Self-motivated with the ability to work independently. Physical Demands: * The Quality Assurance position is a physically demanding position. The work requires extensive walking, standing, bending, and/or heavy lifting. Benefits: * Pay: $20.35/per hr. * Schedule: Third shift: 10:00 pm - 6:30 am * Paid holidays and vacation time * Health Benefits Package * Ancillary benefits-Life insurance, Long Term Disability, FSA, and Dependent Spending care * 401K * Opportunity for growth Management has the exclusive right to alter the scope of work within the framework of the job description at any time without prior notice. Pritchard Industries participates in E-Verify. EEO Notice: Pritchard Industries is an Equal Opportunity Employer and will consider all qualified applicants without regard to race, color, creed, genetic information, religion, national origin, ethnicity, gender; gender identity, sexual orientation, pregnancy, childbirth or related medical condition, age, disability or handicap, servicemember status, relationship or association with a protected veteran, and any other category protected by Federal, state, or local law.

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for sustainability, quality and integrity. Our 99,600 employees operate a network of 2,600 offices and laboratories, working together to enable a better, safer and more interconnected world. Our Orlando, FL laboratory is looking for a Laboratory Analyst to join their SEMI-Volatiles (SVOA) team! The Laboratory Analyst will prepare and analyze samples with accuracy and precision in accordance with SGS' analytical SOPs. The Laboratory Analyst works independently and as part of a team to meet daily production targets and ensure hold times and turnaround times are met. The Laboratory Analyst understands and applies basic analytical chemistry principles. The Laboratory Analyst always follows safe laboratory practices and maintains a safe working environment. Job Functions * After appropriate training independently prepare and analyze samples according to SGS' analytical SOPs using instrumentation specific to the department and analytical methodologies * Performs routine operation, maintenance, calibration of laboratory instruments/equipment * May assist with validation and MDL studies. * Assists with investigation, and preparation of responses to client inquiries and CARs. * Inputs and maintains technical information as needed to support the laboratory functions/operations. * Maintains Laboratory Notebook where applicable. * Adheres to internal standards, policies and procedures. * Performs other duties as assigned. Qualifications * Associate Degree in a Chemistry or similar scientific discipline and 0-2 years of experience in Analytical Chemistry Laboratories OR 3 years of relevant experience (i.e. Sample Prep) (Required) * Bachelor's Degree in a Chemistry or similar scientific discipline and 1-2 years of years' relevant experience in Analytical Chemistry Laboratories (Preferred) * Proficient English language skills (Required) * Basic mathematical and reasoning skills (Required) * Basic computer skills (Required) * Ability to lift/carry/push and/or pull upwards of 25 lbs on a frequent basis (Required) Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.

Benefits: Competitive salary Dental insurance Health insurance Paid time off Vision insurance We are seeking a detail-oriented and experienced HVAC Quality Control Technician to ensure that heating, ventilation, and air conditioning systems meet project specifications, industry standards, and safety regulations. The ideal candidate will be responsible for inspecting HVAC installations, identifying deficiencies, and supporting the project team in delivering high-quality workmanship. Key Responsibilities: Conduct on-site inspections of HVAC installations, including ductwork, piping, equipment, and controls. Verify compliance with mechanical drawings, specifications, codes, and standards (e.g., ASHRAE, SMACNA). Monitor and document all phases of the HVAC installation process to ensure quality and safety. Perform functional tests and commissioning of HVAC systems to verify performance. Generate detailed QC reports, punch lists, and non-conformance notices. Collaborate with project managers, field technicians, and subcontractors to resolve issues. Review installation checklists and ensure accurate completion of documentation. Support internal audits and participate in continuous improvement initiatives. Stay current with changes in codes, regulations, and best practices. Qualifications: High school diploma or GED required; technical certification or associate degree in HVAC or Mechanical Engineering preferred. 3+ years of experience in HVAC installation, service, or quality control. Strong understanding of HVAC systems, codes, and quality standards. Proficiency in reading and interpreting mechanical blueprints and technical documentation. Excellent attention to detail and strong problem-solving skills. Ability to work independently and collaboratively in a field-based environment. Familiarity with quality management systems and reporting tools. OSHA 10 or OSHA 30 certification is a plus. Physical Requirements: Ability to lift up to 50 lbs, climb ladders, and work in confined spaces. Comfortable working in various indoor/outdoor environments. There are many exciting options for a career in HVACR waiting to be explored. If you're looking for a career that offers flexibility, job stability, strong pay, benefits and more, then you've come to the right place!

We are looking for a diligent and detail-oriented Quality Inspector to join our warehouse team. The Quality Inspector will be responsible for ensuring the quality and quantity of items received and shipped for orders related to the Department of Defense (DOD). The ideal candidate will have strong organizational skills, a keen eye for detail, and the ability to work in a dynamic, fast-paced environment. What You'll Do: Receive and inspect incoming shipments to ensure items meet required quality and quantity specifications. Conduct random quality inspections of assemblies throughout the production process and perform final inspections of completed orders before shipment. Handle necessary paperwork, including inventory records, inspection reports, and receiving forms. Accurately enter inspection and inventory data into the company's computer system. Keep track of job orders, percentage of completion and deadlines. Assist the production department with tasks as needed, demonstrating flexibility and a willingness to take on multiple roles. What You'll Need: Must possess a valid forklift operator license. Must be a U.S. citizen (required for DOD-related work). Ability to pass a background check and drug test. Bilingual (English/Spanish) preferred. High attention to detail and strong organizational skills. Familiarity with warehouse operations, inventory management, and quality control processes. Handy and comfortable working with tools and in a hands-on environment to optimize processes and space utilization. Flexibility to wear multiple hats and assist other departments as needed. Basic computer proficiency for data entry and reporting. Ability to lift and move objects weighing up to 50lbs. Ability to stand and walk for extended periods in a warehouse environment. What You'll Get: Range: $42,000-$45,000 Medical Insurance: Employer pays 50% of medical insurance cost 6 annual paid holidays (available after 90 days of employment) 5 days' vacation + 3 sick days after 1 year of employment

Job Title: Quality Control Inspector Division: FiOptix Inc FSLA Status: Non-Exempt Reports To: Project Manager Job Summary: This position is responsible for identifying and escalating quality deficiencies to support the completion of assigned work. Essential Duties and Responsibilities: Perform real time inspections evaluating safety, compliance standards, appearance, and customer experience Schedule and complete a final inspection of work prior to customer walkthrough Complete and submit timely and accurate quality control reports into the appropriate database Develop and maintain relationships with the quality control counterparts of our customers Respond appropriately to customer complaints and inquiries and escalate matters as required Execute target amount of job safety observations Identify areas of improvement to enhance quality and escalate recommendations to management Complete all required Company documentation Other duties as assigned Qualifications: To perform this job successfully, an individual must be able to perform each essential duty mentioned satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or ability required. Education: High school diploma, general education degree (G.E.D.), or related trade school education Experience: One-year telecommunications quality control experience One-year underground construction, aerial construction, and/or multi dwelling unit (MDU) experience Knowledge of highway traffic control standards Technical Skills: Computer and Microsoft Office proficiency Ability to use a wireless tablet Proven knowledge of utility depths and placement Proven ability to read and interpret design prints Soft Skills: Highly organized and detail orientated Strong verbal and written communication skills Ability to work independently and as a member of various teams Ability to multi-task and work in a fast-paced environment under tight deadlines Ability to lead, teach, and train other employees Physical Requirements: Must be able to pass pre-employment screening that includes background and drug testing Must have a valid driver's license and a driving record that meets Company requirements Must be in good physical condition with the ability to stoop, crawl, bend at the knees and waist, squat and lift up to 50 lbs. Ability to stand for long periods of time on varied surfaces Ability to work outdoors in all types of weather May be required to work long and unpredictable hours Ability to travel up to 100% of the time, including short notice travel. Travel includes local site travel or national travel depending on business needs. Disclaimer: All job requirements are subject to possible revision to reflect changes in the position requirements. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations

Do you want to be part of an inclusive team that works to develop innovative therapies for patients? Every day, we are driven to develop and deliver innovative and effective new medicines to patients and physicians. If you want to be part of this exciting work, you belong at Astellas! Astellas Pharma Inc. is a pharmaceutical company conducting business in more than 70 countries around the world. We are committed to turning innovative science into medical solutions that bring value and hope to patients and their families. Keeping our focus on addressing unmet medical needs and conducting our business with ethics and integrity enables us to improve the health of people throughout the world. For more information on Astellas, please visit our website at ***************** Purpose and Scope: The Specialist, Quality Assurance for QC will be responsible for providing direct Quality oversight and support for Quality Control and US Methods and Tech Transfer laboratory operations and method qualification activities. This role will ensure adherence to agency regulations (GxP) and guidance, industry best practices, local regulations, and internal policies and procedures. This role will collaborate with cross-functional teams such as other Quality Assurance, Validation, Manufacturing, and MSAT teams to ensure quality and compliance. Essential Job Responsibilities: Quality Oversight of Laboratory Operations: * Provide QA oversight of QC laboratory activities, including testing of raw materials, in-process samples, drug substance and drug product, and environmental monitoring. * Conduct routine area walkthroughs to ensure laboratories operate in a state of control and comply with current Good Manufacturing Practices (cGxP). Test Method and Material Lifecycle Management: * Oversee the qualification, validation, and transfer of analytical methods, critical reagents, and reference standards. * Review and approve associated protocols, reports, and deviations to ensure compliance with regulatory and internal standards. Technical Leadership and Support: * Serve as a Subject Matter Expert (SME), providing advanced technical guidance and troubleshooting support for complex laboratory and quality-related issues. * Make informed decisions with minimal guidance, proactively seeking input when addressing cross-functional challenges. * Assist in workload management by prioritizing and distributing tasks across the team to ensure efficient execution of responsibilities. Data and Documentation Review: * Review and authorize laboratory testing data within Laboratory Information Management Systems (LIMS). * Review and approve Certificates of Analysis (CoA) and Certificates of Testing (CoT) to support batch disposition. * Review and approve Product Specification documents to ensure alignment with regulatory and internal requirements. Quality Systems and Compliance: * Lead or support nonconformances and deviations related to QC processes, including laboratory investigations, Out of Specification (OOS), and Out of Trend (OOT) results. * Author, review, and approve controlled documents such as Standard Operating Procedures (SOPs), specifications, protocols, and reports for Quality and GMP-related functions. * Author, review, and approve Quality System records, including Nonconformances, Corrective and Preventive Actions (CAPAs), and Change Management documentation, with thorough causal and impact assessments.

Job DescriptionBenefits: Bonus based on performance Competitive salary Opportunity for advancement We are seeking a detail-oriented and dependable Field Quality Control Inspector to join our team. This role involves walking residential construction sites to ensure all work meets established quality standards and complies with client and regulatory requirements. The ideal candidate will have hands-on experience in construction inspections and a strong understanding of residential building practices. Key Responsibilities: Conduct daily field inspections at residential job sites to verify that work meets quality, safety, and compliance standards Inspect construction activities such as trenching, conduit installation, grounding, structural mounting, and equipment placement Ensure contractors adhere to approved specifications, codes, and client requirements Document inspection findings using detailed field notes, reports, and photo documentation Identify deficiencies or deviations and communicate corrective actions to the appropriate team Coordinate with project managers, subcontractors, and utility representatives to resolve issues in the field Ensure proper use and handling of materials and equipment on-site Maintain organized and up-to-date records of all inspections and communications Travel between job sites as required Qualifications: Previous experience in field inspection, construction, or utility-related work (OSP/telecom/electrical a plus) Strong understanding of residential construction processes and safety standards Ability to read and interpret construction drawings, site plans, and specifications Comfortable working outdoors and walking sites daily in various weather conditions Excellent communication and reporting skills Detail-oriented with a proactive approach to identifying and resolving issues Valid drivers license and reliable transportation Job Type: Full-time, Permanent Pay: $21$25 per hour (based on experience) Expected Hours: 40 per week Schedule: 8-hour shift Day shift Monday to Friday Work Location: Field-based (on the road; residential job sites)

Pay: $20. 00 - $29. 00 per hour Job description: Job Title: Quality Control Inspector - Electronics Assembly Company: Liberty Sta ing USA Location: Apopka, FL Pay: Based on experience Schedule: Monday-Thursday, 6:30 AM - 5:15 PM (10-hour shifts); Friday overtime as needed Job Type: Full-Time | Temp-to-Hire Overview Liberty Sta ing USA is seeking a detail-oriented Quality Control Inspector for electronics assembly in Apopka, FL. The ideal candidate is IPC-A-610 certi?ed and experienced in inspecting PCBs, cable assemblies, and box builds. This role ensures that all assemblies meet customer speci?cations and industry quality standards. Key Responsibilities ? Inspect electronic assemblies thoroughly per customer speci?cations and IPC standards. ? Perform ?nal inspections on PCB, box build, and cable assemblies prior to shipping. ? Read and interpret customer drawings, BOMs, and assembly instructions. ? Conduct First Article Inspections (FAI) at all stages of production. ? Verify SMT machine setups and perform solder paste audits before production. ? Conduct daily in-process audits across all departments. ? Use a microscope for precision electronic part and solder inspection. ? Hand solder to support rework or inspection when needed. ? Complete and maintain inspection and shipping documentation for outgoing assemblies. Quali?cations / Skills ? Minimum 1 year of experience in quality control / inspection of electronic assemblies. ? High School Diploma or equivalent. ? IPC-A-610 Certi?cation required. ? Pro?cient in microscope use for precision inspection. ? Knowledge of hand soldering techniques is a plus. ? Strong attention to detail and commitment to quality standards. Why Work With Liberty Sta ing USA? ? Competitive pay based on experience. ? Full-time, long-term, temp-to-hire opportunity. ? 4-day workweek with overtime opportunities on Fridays. ? Supportive team environment and opportunity to grow in the electronics manufacturing ?eld. Keywords for Visibility: Quality Control Inspector, Electronics Inspector, IPC-A-610, PCB Inspection, Cable Assembly, Box Build, SMT Inspection, Hand Soldering, Electronics Assembly, Apopka Jobs, Liberty Sta ing USA Careers, In-Process Audit, Final Inspection Apply today to join Liberty Sta ing USA as a Quality Control Inspector and advance your career in electronics assembly in Apopka, FL! Job Type: Full-time Bene?ts: ? Dental insurance ? Health insurance ? Vision insurance

As a Quality Control Inspector, you will play a vital role in maintaining the highest standards of quality for our products. You will be responsible for thoroughly inspecting materials, components, and finished products to ensure compliance with specifications and industry standards. Your meticulous eye for detail will help us deliver products that meet and exceed customer expectations. Additionally, you will have the opportunity to collaborate with cross-functional teams, identify process improvements, and contribute to a culture of continuous improvement. You will have the chance to showcase your commitment to quality as you participate in our annual AISC QC Audits and develop goals to improve and promote quality throughout the organization. Your ability to work well with production to solve any issues that arise will be crucial in maintaining our high standards. Embrace this exciting opportunity to make a significant impact on our quality control processes and join our team of dedicated professionals. Qualifications: A minimum of 5 years of experience in laying out and fabricating steel is required for this position. Ability to accurately read and interpret fabrication and construction drawings will be essential in ensuring the quality of our products. Welding Certification in D1.1 and/or D1.5 is preferred, as it demonstrates your proficiency in welding standards. Strong attention to detail, excellent problem-solving skills, and the ability to work collaboratively with cross-functional teams is crucial in maintaining our high standards of quality. Benefits: Health/dental/vision/disability insurance Paid time off Paid holidays 401k with employer match and 100% vesting from the beginning Paid weekly Company Paid Life Insurance Selected applicant will be subject to a pre-employment physical with drug/alcohol testing.

Precision CNC Manufacturer seeking experienced QC Inspector. The QC Inspector is responsible for inspection of incoming materials, in-process inspections of product and ensures tight tolerance machined parts meet the specifications of the drawings and the parts meet customer's quality standards. The Quality Control Inspector performs a variety of routine inspection procedures to ensure quality at various stages of production. Inspects in-process and/or finished parts and subassemblies for conformance to quality assurance standards. DUITIES: Being a CMM (Coordinate Measuring Machine) programmer with PCDMIS software requires a combination of technical knowledge and mechanical skills. Here are some important skills and qualifications for a CMM programmer: Qualifications: • High School diploma or equivalent • Minimum 5 years related experience, preferably in a similar environment • Strong knowledge of inspection tools, advanced shop mathematics and machine shop practices. • Mechanical inspection experience • Thorough knowledge of geometric tolerancing (GD&T) • Ability to work from blueprints, sketches and verbal instructions. • Strong computer skills. • CMM experience desired. • Team player and flexible with work assignments. These skills, combined with hands-on experience, are highly valued in the field of CMM programming with PCDMIS software. • Mechanical Skills & Capacity • Problem Solving - Identifies and resolves problems in a timely manner • Mathematical Skills - Proficient in shop math skills • Communication Proficiency - Writes clearly and informatively; Presents numerical data effectively; Able to read and interpret written information. • Judgment - Exhibits sound and accurate judgment; Includes appropriate people in decision-making process. • Quality - Demonstrates accuracy and thoroughness; Monitors own work to ensure quality. • Productivity- work in timely manner; Works quickly • Perform first article inspections. • Conduct random inspections throughout the day. • Immediately coordinate any problems with Quality Supervisor. BENEFITS: • State of the art equipment • Health insurance • Dental insurance • Vision insurance • Company Paid Life Insurance & Supplemental available • 401K • Vacation • Paid Holidays We are an Equal Opportunity Employer. Salary commensurate with experience. Type: Full-time

Full-time Description JE Technology Solutions, Inc., a designer and manufacturer of Aircraft Ground Equipment, is seeking a talented, experienced, and highly-analytical Quality Control Inspector to join our production department. As a Quality Control Inspector, you will uphold the safety regulations of our company and supervise the production process to guarantee that all our products meet quality expectations. The chosen candidate will perform regular product evaluations, record inspection results, and recommend improvements to the production process. To excel in this role, applicants should demonstrate great attention to detail with excellent technical and math abilities. Responsibilities: · Perform regular quality assessments on all incoming materials from vendors and outgoing products for shipping. · Reject all products and materials that fail to meet quality expectations. · Read drawings and specifications to understand the requirements of products and services. · Utilize tools such as eDrawings and Isometric Views on drawings to verify orientation of items during inspection. · Measure product dimensions, examine functionality and compare the final product to the specifications. · Recommend improvements to the production process to ensure quality control. · Document inspection outcomes by completing detailed reports. · Measure and record Quality Control related KPIs, such as First Pass Yield. · Communicate and confirm defects have been corrected with the production team. · Promote Quality-At-The-Source best practices to improve product excellence. · Ability to problem solve using tools like “ask five whys”. · Observe the production process. · Prioritize prompt response to production floor to ensure continuous flow of production. · Collaborate with the quality and manufacturing teams to resolve quality-related issues in a timely manner. · Participate in functional testing of products such as load testing, electrical testing, pressure testing, etc. · Ability to follow company Standard Operating Procedures and uphold Workmanship Standards. · Add occasional need to travel for field inspections including military bases. Requirements High school diploma or equivalent qualification. Certification in quality control is preferred. A minimum of 2 years' experience in a similar role. Excellent knowledge of MS Office. Good math and technical skills. Strong understanding of quality control standards and testing techniques. Willing to work shift from Monday - Thursday 3:30pm - 12:00am. Preferred Skills: · Quality Inspection · Welding Inspection · Proficiency with inspection equipment, such as: o Tape Measure o Calipers o Dial Indicator o Multimeter o Pressure Gauges o Thread Gauges o Gauge Blocks · Familiarity with PCMM inspection equipment including probe and scanner attachments is a plus · Quality Control · Dimensional Inspection · ISO 9001:2015 Awareness · Experience with GD&T is a plus · Manufacturing Processes and Procedures · Familiarity with AS9100 is a plus · Experience with NDT and Magnetic Particle Inspection is a plus JE Technology Solutions, Inc. is a Drug Free Workplace. All offers of employment by JE Technology Solutions, Inc. are contingent on completion of a drug test within 2 business days of your offer acceptance and a background check with results in compliance with company policy. JE Technology Solutions, Inc. uses E-Verify to confirm employment eligibility for roles based in the United States. JE Technology Solutions is an Equal Opportunity Employer. All applicants will receive consideration for employment without regard to race, color, religion, sexual orientation, gender identity, national origin, veteran or disability status.

Job DescriptionBenefits: 401(k) matching Competitive salary Dental insurance Health insurance Paid time off Vision insurance Structural Steel Certified Welding Inspector (CWI)/QC) Structural steel fabricator in Leesburg, Florida is seeking an experienced Certified Welding Inspector (CWI). We are looking for a team player with experience in AISC standards and audits. This is a non-traveling position, which reports to the QC Manager. EDUCATION EXPERIENCE: High school diploma or equivalency certificate. 3+ years of experience as a certified welding inspector in a structural steel fabrication facility, as well as experience in Quality Assurance. Current American Welding Society certified welding inspector (CWI). Ability to read and understand drawings plans and specifications. Ability to perform physical activities that require frequent bending at the waist, squatting, climbing, kneeling and reaching about the head. Must be detail-oriented, extremely organized and have a good work ethic. Microsoft Office skills, including Excel, required. Experience working in fabrication shop UT and MT certification is required AISC standards/audit experience highly preferred. RESPONSIBILITIES: Maintain Quality Control Manual, including compliance to all AISC standards. Position involves visual inspection of structural steel, including bolted and welded connections, and performing non-destructive testing. Interpret codes and specifications in accordance with the drawing requirements. Use a computer to compile and submit data of acceptance or rejection of inspections, as well as for inter-office communications and audit program management. Recommend and approve repairs as well as perform visual inspection of work in progress and completed work. Review and verify welding procedures and welder qualifications. Review Mill test reports and certifications

At Disney, we're storytellers. We make the impossible, possible. We do this through utilizing and developing cutting-edge technology and pushing the envelope to bring stories to life through our movies, products, interactive games, parks and resorts, and media networks. Now is your chance to join our talented team that delivers unparalleled creative content to audiences around the world. "We create happiness." That's our motto at Walt Disney Parks and Resorts. And it permeates everything we do. At Disney, you'll help inspire that magic by enabling our teams to push the limits of entertainment and create the never-before-seen! The Metalworker QC Inspector is more than just a modern day superhero. They conduct routine inspections on rides and equipment to ensure the safety of our Guests and Cast Members. The Metalworker QC Inspector is expected to complete scheduled inspections by the end of shift and assist with repairs if necessary. The field service position may include work from elevated platforms and confined spaces throughout the Walt Disney World Parks and Resort property. The pay rate for this role in Florida is $33.40 per hour. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits. To learn more about our benefits visit: ***************************************

and Objectives The Analytical Chemist job duties consist of the technical aspects of the department in support of directions from the QC Analytical Lab Supervisor and the Quality Operations Manager. He/She is responsible for ensuring regulatory compliance to FDA Guidelines (DSHEA), customer requirements, and departmental function. The primary responsibility is to develop and validate analytical methods for various dietary finished product matrixes and train analysts and chemists. He/She will support analytical testing of incoming raw materials, in-process samples, stability, and finished goods within the QC Laboratory. Essential Job Functions Coordinate the testing of raw materials and finished goods with outside labs when required, and allocate results of said testing to the necessary persons. Develop and perform analytical methods based on adaptations of USP, AOAC, NSF, or other industrial resources. Write SOPs and methods to meet cGMP's and GLP. Validate and qualify laboratory methods including writing of protocols and reports. Train chemists and analysts on laboratory methods & procedures when requested. Assist and supervise incoming raw materials and finished product analytical analysis. Perform daily testing of incoming samples using wet chemical and instrumental techniques, as needed. Maintain and record analytical data within prescribed notebooks. Compile analytical testing data and issue testing justification documentation. Compile lab results and issue completed worksheets for final review. Prepare various laboratory reagents as required for daily operations. Order and stock all lab supplies required for operation while keeping cost down through effective sourcing and purchasing. Ensure accuracy and completeness of all QC logbooks and binders. Provide peer review of other chemists' work as needed. Ensure that the QC lab is kept in good repair. Communicate issues and non-conformances to the QC Analytical Lab Supervisor and Quality Operations Manager immediately. Conduct Lab Investigations for all unexpected results. Knowledge, Skills, and Abilities Required Must be Proficient in PC functions, (WORD, EXCEL, ACCESS, POWERPOINT, etc.) and Empower software. Must be well organized and detail oriented. Demonstrate good verbal and written communication skills. Be familiar with and demonstrate excellent advanced laboratory problem solving skills. Must be experienced in advanced laboratory testing methods. Must be knowledgeable in HPLC configuration including column designs, flow rates, reagent variabilities, wavelengths, and detectors. Must be knowledgeable in solubility factors, oil products, water-based products, and oil/water emulsions and the impacts to testing formulations of these designs. Must demonstrate Good Laboratory Practice in completing daily work assignments. Competent in performing mathematical and scientific calculations as they relate to job function. Communication and management skills. Ability to manage, carry out, and prioritize analytical functions. Ability to see areas that need improvement and to address them. Supervisory Responsibility Responsible for ensuring all requirements for Analytical functions are met. Responsible for providing an evaluation of the technical performance of analytical chemists as requested. Working Conditions Working functions are generally limited to the QC lab with some facility work at times. Minimum Qualifications BS Degree in chemistry, analytical chemistry, instrumental analysis, physical chemistry (or extensive analytical laboratory experience in lieu of degree) . 10 years previous laboratory experience. Driven, intelligent, and motivated to succeed and improve. Extensive Analytical (HPLC) analysis experience Excellent people skills, and ability to function under pressure. Success Factors Driven and motivated. Technical leadership. Intelligent and displays aptitude. Problem solving skills. Detail oriented. Self-motivated team player. Well organized. Willingness to cooperate and work with other departments. Benefits Retirement plan 401(k) - 401(k) matching Dental, Vision, Health, Short/long term disability and Life insurance Paid time off Holiday

SGS is the world's leading Testing, Inspection and Certification company. We operate a network of over 2,700 laboratories and business facilities across 119 countries, supported by a team of 99,250 dedicated professionals. With over 145 years of service excellence, we combine the precision and accuracy that define Swiss companies to help organizations achieve the highest standards of quality, safety and compliance. Our brand promise, when you need to be sure , underscores our commitment to reliability, integrity and trust - enabling businesses to thrive with confidence. We proudly deliver our expert services through the SGS name and trusted specialized brands, including Brightsight, Bluesign, Maine Pointe and Nutrasource. SGS is publicly traded on the SIX Swiss Exchange under the ticker symbol SGSN (ISIN CH0002497458, Reuters SGSN.S, Bloomberg SGSN:SW). Our Orlando, FL laboratory is looking for a Laboratory Analyst to join their General Chemistry team! The Laboratory Analyst prepares and analyzes samples with accuracy and precision in accordance to SGS' analytical SOPs. The Laboratory Analyst works independently and as part of a team to meet daily production targets and ensure hold times and turnaround times are met. The Laboratory Analyst understands and applies basic analytical chemistry principles. The Laboratory Analyst always follows safe laboratory practices and maintains a safe working environment. Job functions: After appropriate training independently prepares and analyzes samples according to SGS' analytical SOPs using instrumentation specific to the department and analytical methodologies Performs routine operation, maintenance, calibration of laboratory instruments/equipment May assist with validation and MDL studies. Assists with investigation, and preparation of responses to client inquiries and CARs. Inputs and maintains technical information as needed to support the laboratory functions/operations. Maintains Laboratory Notebook where applicable. Adheres to internal standards, policies and procedures. Performs other duties as assigned. Qualifications Associate Degree in a Chemistry or similar scientific discipline and 0-2 years of experience in Analytical Chemistry Laboratories OR 3 years of relevant experience (i.e. Sample Prep) (Required) Bachelor's Degree in a Chemistry or similar scientific discipline and 1-2 years of years' relevant experience in Analytical Chemistry Laboratories (Preferred) Basic mathematical and reasoning skills (Required) Experience with Microsoft Office (Excel, Outlook, Word) (Required) Experience with LIMS (Preferred) Ability to lift/carry/push and/or pull upwards of 25 lbs on a frequent basis (Required) Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.

Job DescriptionDescription: JE Technology Solutions, Inc., a designer and manufacturer of Aircraft Ground Equipment, is seeking a talented, experienced, and highly-analytical Quality Control Inspector to join our production department. As a Quality Control Inspector, you will uphold the safety regulations of our company and supervise the production process to guarantee that all our products meet quality expectations. The chosen candidate will perform regular product evaluations, record inspection results, and recommend improvements to the production process. To excel in this role, applicants should demonstrate great attention to detail with excellent technical and math abilities. Responsibilities: · Perform regular quality assessments on all incoming materials from vendors and outgoing products for shipping. · Reject all products and materials that fail to meet quality expectations. · Read drawings and specifications to understand the requirements of products and services. · Utilize tools such as eDrawings and Isometric Views on drawings to verify orientation of items during inspection. · Measure product dimensions, examine functionality and compare the final product to the specifications. · Recommend improvements to the production process to ensure quality control. · Document inspection outcomes by completing detailed reports. · Measure and record Quality Control related KPIs, such as First Pass Yield. · Communicate and confirm defects have been corrected with the production team. · Promote Quality-At-The-Source best practices to improve product excellence. · Ability to problem solve using tools like “ask five whys”. · Observe the production process. · Prioritize prompt response to production floor to ensure continuous flow of production. · Collaborate with the quality and manufacturing teams to resolve quality-related issues in a timely manner. · Participate in functional testing of products such as load testing, electrical testing, pressure testing, etc. · Ability to follow company Standard Operating Procedures and uphold Workmanship Standards. · Add occasional need to travel for field inspections including military bases. Requirements: High school diploma or equivalent qualification. Certification in quality control is preferred. A minimum of 2 years' experience in a similar role. Excellent knowledge of MS Office. Good math and technical skills. Strong understanding of quality control standards and testing techniques. Willing to work shift from 5:00 a.m. to 3:30p.m., 4 days/week. Preferred Skills: · Quality Inspection · Welding Inspection · Proficiency with inspection equipment, such as: o Tape Measure o Calipers o Dial Indicator o Multimeter o Pressure Gauges o Thread Gauges o Gauge Blocks · Familiarity with PCMM inspection equipment including probe and scanner attachments is a plus · Quality Control · Dimensional Inspection · ISO 9001:2015 Awareness · Experience with GD&T is a plus · Manufacturing Processes and Procedures · Familiarity with AS9100 is a plus · Experience with NDT and Magnetic Particle Inspection is a plus JE Technology Solutions, Inc. is a Drug Free Workplace. All offers of employment by JE Technology Solutions, Inc. are contingent on completion of a drug test within 2 business days of your offer acceptance and a background check with results in compliance with company policy. JE Technology Solutions, Inc. uses E-Verify to confirm employment eligibility for roles based in the United States. JE Technology Solutions is an Equal Opportunity Employer. All applicants will receive consideration for employment without regard to race, color, religion, sexual orientation, gender identity, national origin, veteran or disability status.